ZXR10-BFD-MIB

Imported modules

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	Unsigned32
Counter32	enterprises	NOTIFICATION-TYPE
IpAddress	InetAddressType	InetAddress
TruthValue	TimeStamp	TEXTUAL-CONVENTION
DisplayString

Defined Types

Zxr10BfdSessIndexTC
An index used to uniquely identify BFD sessions.
TEXTUAL-CONVENTION
	Unsigned32	1..4294967295

Zxr10BfdInterval
The BFD interval delay in microseconds.
TEXTUAL-CONVENTION
	Unsigned32	1..4294967295

Zxr10BfdDiag
A common BFD diagnostic code.
TEXTUAL-CONVENTION
	INTEGER	noDiagnostic(1), controlDetectionTimeExpired(2), echoFunctionFailed(3), neighborSignaledSessionDown(4), forwardingPlaneReset(5), pathDown(6), concatenatedPathDown(7), administrativelyDown(8), reverseConcatenatedPathDown(9)

Zxr10BfdAddr
An octet string containing bfd addr type.
TEXTUAL-CONVENTION
	OCTET STRING	Size(0..64)

Zxr10BfdSessEntry
SEQUENCE
	zxr10BfdSessIndex	Zxr10BfdSessIndexTC
	zxr10BfdSessApplicationId	Unsigned32
	zxr10BfdSessInitMode	INTEGER
	zxr10BfdSessDiscriminator	Unsigned32
	zxr10BfdSessRemoteDiscr	Unsigned32
	zxr10BfdSessSrcUdpPort	Unsigned32
	zxr10BfdSessState	INTEGER
	zxr10BfdSessRemoteHeardFlag	TruthValue
	zxr10BfdSessDiag	Zxr10BfdDiag
	zxr10BfdSessOperMode	INTEGER
	zxr10BfdSessDemandModeDesiredFlag	TruthValue
	zxr10BfdSessEchoFuncModeDesiredFlag	TruthValue
	zxr10BfdSessControlPlanIndepFlag	TruthValue
	zxr10BfdSessAddrType	InetAddressType
	zxr10BfdSessLocalAddr	Zxr10BfdAddr
	zxr10BfdSessRemoteAddr	Zxr10BfdAddr
	zxr10BfdSessLdpDestAddr	IpAddress
	zxr10BfdSessLdpPrefixLength	Unsigned32
	zxr10BfdSessRsvpTunnelId	Unsigned32
	zxr10BfdSessPWPeerAddr	InetAddress
	zxr10BfdSessPWVcId	Unsigned32
	zxr10BfdSessDesiredMinTxInterval	Zxr10BfdInterval
	zxr10BfdSessReqMinRxInterval	Zxr10BfdInterval
	zxr10BfdSessReqMinEchoRxInterval	Zxr10BfdInterval
	zxr10BfdSessDetectMult	Unsigned32
	zxr10BfdSessHoldTime	Unsigned32
	zxr10BfdSessAuthPresFlag	TruthValue
	zxr10BfdSessAuthenticationType	INTEGER
	zxr10BfdSessVersionNumber	Unsigned32
	zxr10BfdSessType	INTEGER
	zxr10BfdSessInterface	Unsigned32
	zxr10BfdSessName	DisplayString
	zxr10BfdSessVrfName	DisplayString
	zxr10BfdSessPwName	DisplayString
	zxr10BfdSessPktLenMin	Unsigned32
	zxr10BfdSessPktLenMax	Unsigned32
	zxr10BfdSessIntfName	DisplayString
	zxr10BfdSessPwTTL	Unsigned32
	zxr10BfdSessDscp	Unsigned32
	zxr10BfdSessMultiPortMode	TruthValue
	zxr10BfdSessActualTxInterval	Zxr10BfdInterval
	zxr10BfdSessActualRxInterval	Zxr10BfdInterval
	zxr10BfdSessActualDetectMult	Unsigned32

Zxr10BfdSessPerfEntry
SEQUENCE
	zxr10BfdSessPerfIndex	Zxr10BfdSessIndexTC
	zxr10BfdSessPerfPktIn	Counter32
	zxr10BfdSessPerfPktOut	Counter32
	zxr10BfdSessUpTime	TimeStamp
	zxr10BfdSessPerfLastCommLostDiag	Zxr10BfdDiag
	zxr10BfdSessPerfMinTxInterval	Zxr10BfdInterval
	zxr10BfdSessPerfMaxTxInterval	Zxr10BfdInterval
	zxr10BfdSessPerfAvgTxInterval	Zxr10BfdInterval
	zxr10BfdSessPerfMinRxInterval	Zxr10BfdInterval
	zxr10BfdSessPerfMaxRxInterval	Zxr10BfdInterval
	zxr10BfdSessPerfAvgRxInterval	Zxr10BfdInterval

Zxr10BfdSessName2IndexEntry
SEQUENCE
	zxr10BfdSessName2IndexSessName	DisplayString
	zxr10BfdSessName2IndexSessIndex	Zxr10BfdSessIndexTC

Zxr10BfdIntfParaEntry
SEQUENCE
	zxr10BfdIntfParaIntfName	DisplayString
	zxr10BfdIntfParaInterval	Zxr10BfdInterval
	zxr10BfdIntfParaMinRx	Zxr10BfdInterval
	zxr10BfdIntfParaMultiplier	Unsigned32

Zxr10BfdStatsEntry
SEQUENCE
	zxr10BfdStatsType	INTEGER
	zxr10BfdStatsUp	Unsigned32
	zxr10BfdStatsDown	Unsigned32
	zxr10BfdStatsInitOrAdmindown	Unsigned32

Defined Values

zteBfdMib		1.3.6.1.4.1.3902.3.322
ZTE BFD MIB
MODULE-IDENTITY

zxr10BfdNotifications		1.3.6.1.4.1.3902.3.322.0
OBJECT IDENTIFIER

zxr10BfdObjects		1.3.6.1.4.1.3902.3.322.1
OBJECT IDENTIFIER

zxr10BfdScalarObjects		1.3.6.1.4.1.3902.3.322.1.1
OBJECT IDENTIFIER

zte		1.3.6.1.4.1.3902
OBJECT IDENTIFIER

zxr10		1.3.6.1.4.1.3902.3
OBJECT IDENTIFIER

zxr10BfdAdminStatus		1.3.6.1.4.1.3902.3.322.1.1.1
The global administrative status of BFD in this router. The value 'enabled' denotes that the BFD Process is active on at least one interface; 'disabled' disables it on all interfaces.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

zxr10BfdVersionNumber		1.3.6.1.4.1.3902.3.322.1.1.2
The current version number of the BFD protocol.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

zxr10BfdSessNotificationsEnable		1.3.6.1.4.1.3902.3.322.1.1.3
If this object is set to true(1), then it enables the emission of zxr10BfdSessUp and zxr10BfdSessDown notifications; otherwise these notifications are not emitted.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

zxr10BfdDefault		1.3.6.1.4.1.3902.3.322.1.1.4
This object specifies the remote IP address which is being associated with L2 BFD session.
Status: current	Access: read-only
OBJECT-TYPE
	Zxr10BfdAddr

zxr10BfdSessTable		1.3.6.1.4.1.3902.3.322.1.2
The BFD Session Table describes the BFD sessions.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Zxr10BfdSessEntry

zxr10BfdSessEntry		1.3.6.1.4.1.3902.3.322.1.2.1
The BFD Session Entry describes BFD session.
Status: current	Access: not-accessible
OBJECT-TYPE
	Zxr10BfdSessEntry

zxr10BfdSessIndex		1.3.6.1.4.1.3902.3.322.1.2.1.1
This object contains an index used to represent a unique BFD session on this device.
Status: current	Access: read-only
OBJECT-TYPE
	Zxr10BfdSessIndexTC

zxr10BfdSessApplicationId		1.3.6.1.4.1.3902.3.322.1.2.1.2
This object contains an index used to indicate a local application which owns or maintains this BFD session. This object value may be one of the following values or sum of some values which indicates that the session is owned by several applications: BGP_BFD(0x0001), OSPF_BFD(0x0002), ISIS_BFD(0x0004), RSVP_BFD(0x0008), LDP_BFD(0x0010), STATIC_BFD(0x0020), RSVP_LSP_BFD(0x0040), LDP_LSP_BFD(0x0080), VRRP_BFD(0x0100), PBR_BFD(0x0200), INSTANCE_BFD(0x0400), PIM_BFD(0x0800), MSDP_BFD(0x1000), RIP_BFD(0x2000), GRE_BFD(0x4000), RSVP_TUNNEL_BFD(0x8000), SIBMGR_BFD(0x10000), BIDIR_RSVPLSP_BFD(0x20000), LACP_BFD(0x40000), L2VPN_BFD(0x80000).
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

zxr10BfdSessInitMode		1.3.6.1.4.1.3902.3.322.1.2.1.3
The Init Mode of the BFD session.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	active(1), passive(2)

zxr10BfdSessDiscriminator		1.3.6.1.4.1.3902.3.322.1.2.1.4
This object specifies the local discriminator for this BFD session, used to uniquely identify it.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..4294967295

zxr10BfdSessRemoteDiscr		1.3.6.1.4.1.3902.3.322.1.2.1.5
This object specifies the session discriminator chosen by the remote system for this BFD session.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..4294967295

zxr10BfdSessSrcUdpPort		1.3.6.1.4.1.3902.3.322.1.2.1.6
The source UDP Port for BFD.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..65535

zxr10BfdSessState		1.3.6.1.4.1.3902.3.322.1.2.1.7
The perceived state of the BFD session.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	adminDown(1), down(2), init(3), up(4), failing(5)

zxr10BfdSessRemoteHeardFlag		1.3.6.1.4.1.3902.3.322.1.2.1.8
This object specifies status of BFD packet reception from the remote system. Specifically, it is set to true(1) if the local system is actively receiving BFD packets from the remote system, and is set to false(0) if the local system has not received BFD packets recently (within the detection time) or if the local system is attempting to tear down the BFD session. It is only applicable if this BFD session is running version 0
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

zxr10BfdSessDiag		1.3.6.1.4.1.3902.3.322.1.2.1.9
A diagnostic code specifying the local system's reason for the last transition of the session from up(1) to some other state.
Status: current	Access: read-only
OBJECT-TYPE
	Zxr10BfdDiag

zxr10BfdSessOperMode		1.3.6.1.4.1.3902.3.322.1.2.1.10
This object specifies current operating mode that BFD session is operating in.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	asyncModeWEchoFun(1), asynchModeWOEchoFun(2), demandModeWEchoFunction(3), demandModeWOEchoFunction(4)

zxr10BfdSessDemandModeDesiredFlag		1.3.6.1.4.1.3902.3.322.1.2.1.11
This object indicates that the local system's desire to use Demand mode. Specifically, it is set to true(1) if the local system wishes to use Demand mode or false(0) if not
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

zxr10BfdSessEchoFuncModeDesiredFlag		1.3.6.1.4.1.3902.3.322.1.2.1.12
This object indicates that the local system's desire to use Echo mode. Specifically, it is set to true(1) if the local system wishes to use Echo mode or false(0) if not
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

zxr10BfdSessControlPlanIndepFlag		1.3.6.1.4.1.3902.3.322.1.2.1.13
This object indicates that the local system's ability to continue to function through a disruption of the control plane. Specifically, it is set to true(1) if the local system BFD implementation is independent of the control plane. Otherwise, the value is set to false(0)
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

zxr10BfdSessAddrType		1.3.6.1.4.1.3902.3.322.1.2.1.14
This object specifies IP address type of the neighboring IP address which is being monitored with this BFD session. Only values unknown(0), ipv4(1) or ipv6(2) have to be supported. A value of unknown(0) is allowed only when the outgoing interface is of type point-to-point, or when the BFD session is not associated with a specific interface. If any other unsupported values are attempted in a set operation, the agent MUST return an inconsistentValue error.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddressType

zxr10BfdSessLocalAddr		1.3.6.1.4.1.3902.3.322.1.2.1.15
This object specifies the local IP address which is being associated with this BFD session.
Status: current	Access: read-only
OBJECT-TYPE
	Zxr10BfdAddr

zxr10BfdSessRemoteAddr		1.3.6.1.4.1.3902.3.322.1.2.1.16
This object specifies the neighboring IP address which is being monitored with this BFD session.
Status: current	Access: read-only
OBJECT-TYPE
	Zxr10BfdAddr

zxr10BfdSessLdpDestAddr		1.3.6.1.4.1.3902.3.322.1.2.1.17
This object specifies the FEC's destination address which is being associated with this LDP LSP BFD session.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

zxr10BfdSessLdpPrefixLength		1.3.6.1.4.1.3902.3.322.1.2.1.18
This object specifies the prefix length which is being associated with this LDP LSP BFD session.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

zxr10BfdSessRsvpTunnelId		1.3.6.1.4.1.3902.3.322.1.2.1.19
This object specifies the tunnle Id which is being monitored with this RSVP LSP BFD session.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

zxr10BfdSessPWPeerAddr		1.3.6.1.4.1.3902.3.322.1.2.1.20
This object specifies the Pseudowire's remote IP address which is being monitored with this PW BFD session.
Status: obsolete	Access: read-only
OBJECT-TYPE
	InetAddress

zxr10BfdSessPWVcId		1.3.6.1.4.1.3902.3.322.1.2.1.21
This object specifies the Pseudowire's Vc-Id which is being monitored with this PW BFD session.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Unsigned32

zxr10BfdSessDesiredMinTxInterval		1.3.6.1.4.1.3902.3.322.1.2.1.22
This object specifies the minimum interval, in microseconds, that the local system would like to use when transmitting BFD Control packets.
Status: current	Access: read-only
OBJECT-TYPE
	Zxr10BfdInterval

zxr10BfdSessReqMinRxInterval		1.3.6.1.4.1.3902.3.322.1.2.1.23
This object specifies the minimum interval, in microseconds, between received BFD Control packets the local system is capable of supporting.
Status: current	Access: read-only
OBJECT-TYPE
	Zxr10BfdInterval

zxr10BfdSessReqMinEchoRxInterval		1.3.6.1.4.1.3902.3.322.1.2.1.24
This object specifies the minimum interval, in microseconds, between received BFD Echo packets that this system is capable of supporting.
Status: current	Access: read-only
OBJECT-TYPE
	Zxr10BfdInterval

zxr10BfdSessDetectMult		1.3.6.1.4.1.3902.3.322.1.2.1.25
This object specifies the Detect time multiplier.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

zxr10BfdSessHoldTime		1.3.6.1.4.1.3902.3.322.1.2.1.26
This object specifies the Hold time of this BFD session.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

zxr10BfdSessAuthPresFlag		1.3.6.1.4.1.3902.3.322.1.2.1.27
This object indicates that the local system's desire to use Authentication. Specifically, it is set to true(1) if the local system wishes the session to be authenticated or false(0) if not
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

zxr10BfdSessAuthenticationType		1.3.6.1.4.1.3902.3.322.1.2.1.28
The Authentication Type used for this BFD session. This field is valid only when the Authentication Present bit is set
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	simplePassword(1), keyedMD5(2), meticulousKeyedMD5(3), keyedSHA1(4), meticulousKeyedSHA1(5)

zxr10BfdSessVersionNumber		1.3.6.1.4.1.3902.3.322.1.2.1.29
The version number of the BFD protocol that this session is running in.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

zxr10BfdSessType		1.3.6.1.4.1.3902.3.322.1.2.1.30
The type of this BFD session.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	singleHop(1), multiHop(2), l2Bfd(3), ldpBfd(4), pwBfd(5), rsvpTunnelBfd(6), rsvpLspBfd(7), staticLdpBfd(8), staticRsvpTunnelBfd(9), lagBfd(10)

zxr10BfdSessInterface		1.3.6.1.4.1.3902.3.322.1.2.1.31
This object contains an interface index used to indicate the interface which this BFD session is running on.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..65535

zxr10BfdSessName		1.3.6.1.4.1.3902.3.322.1.2.1.32
The instance name of this BFD session.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

zxr10BfdSessVrfName		1.3.6.1.4.1.3902.3.322.1.2.1.33
The vrf name of this BFD session.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

zxr10BfdSessPwName		1.3.6.1.4.1.3902.3.322.1.2.1.34
The pw name of this BFD session.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

zxr10BfdSessPktLenMin		1.3.6.1.4.1.3902.3.322.1.2.1.35
This object specifies the min pktLen of this BFD session.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

zxr10BfdSessPktLenMax		1.3.6.1.4.1.3902.3.322.1.2.1.36
This object specifies the max pktLen of this BFD session.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

zxr10BfdSessIntfName		1.3.6.1.4.1.3902.3.322.1.2.1.37
This object contains an interface name used to indicate the interface which this BFD session is running on.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

zxr10BfdSessPwTTL		1.3.6.1.4.1.3902.3.322.1.2.1.38
PW TTL of this BFD session.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..255

zxr10BfdSessDscp		1.3.6.1.4.1.3902.3.322.1.2.1.39
This object specifies the DSCP value of BFD packet.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..63

zxr10BfdSessMultiPortMode		1.3.6.1.4.1.3902.3.322.1.2.1.40
This object specifies the UDP port of multi-hop BFD, 'false' denotes to use UDP port 3784, 'true' denotes to use 4784.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue	true(1), false(2)

zxr10BfdSessActualTxInterval		1.3.6.1.4.1.3902.3.322.1.2.1.41
This object specifies the actual Tx interval, inmicroseconds.
Status: current	Access: read-only
OBJECT-TYPE
	Zxr10BfdInterval

zxr10BfdSessActualRxInterval		1.3.6.1.4.1.3902.3.322.1.2.1.42
This object specifies the actual Rx interval, inmicroseconds.
Status: current	Access: read-only
OBJECT-TYPE
	Zxr10BfdInterval

zxr10BfdSessActualDetectMult		1.3.6.1.4.1.3902.3.322.1.2.1.43
This object specifies the actual Detect time multiplier.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

zxr10BfdSessPerfTable		1.3.6.1.4.1.3902.3.322.1.3
This table specifies BFD Session performance counters.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Zxr10BfdSessPerfEntry

zxr10BfdSessPerfEntry		1.3.6.1.4.1.3902.3.322.1.3.1
The BFD Session Entry describes BFD session Performance.
Status: current	Access: not-accessible
OBJECT-TYPE
	Zxr10BfdSessPerfEntry

zxr10BfdSessPerfIndex		1.3.6.1.4.1.3902.3.322.1.3.1.1
This object contains an index used to represent a unique BFD session on this device.
Status: current	Access: read-only
OBJECT-TYPE
	Zxr10BfdSessIndexTC

zxr10BfdSessPerfPktIn		1.3.6.1.4.1.3902.3.322.1.3.1.2
The total number of BFD messages received for this BFD session.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

zxr10BfdSessPerfPktOut		1.3.6.1.4.1.3902.3.322.1.3.1.3
The total number of BFD messages sent for this BFD session.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

zxr10BfdSessUpTime		1.3.6.1.4.1.3902.3.322.1.3.1.4
The value of sysUpTime on the most recent occasion at which the session came up. If no such up event exists this object contains a zero value.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

zxr10BfdSessPerfLastCommLostDiag		1.3.6.1.4.1.3902.3.322.1.3.1.5
The BFD diag code for the last time communication was lost with the neighbor. If no such down event exists this object contains a zero value.
Status: current	Access: read-only
OBJECT-TYPE
	Zxr10BfdDiag

zxr10BfdSessPerfMinTxInterval		1.3.6.1.4.1.3902.3.322.1.3.1.6
This object specifies the minimum interval, in microseconds, that the local system have transmitting BFD Control packets.
Status: current	Access: read-only
OBJECT-TYPE
	Zxr10BfdInterval

zxr10BfdSessPerfMaxTxInterval		1.3.6.1.4.1.3902.3.322.1.3.1.7
This object specifies the maximum interval, in microseconds, that the local system have transmitting BFD Control packets.
Status: current	Access: read-only
OBJECT-TYPE
	Zxr10BfdInterval

zxr10BfdSessPerfAvgTxInterval		1.3.6.1.4.1.3902.3.322.1.3.1.8
This object specifies the average interval, in microseconds, that the local system have transmitting BFD Control packets.
Status: current	Access: read-only
OBJECT-TYPE
	Zxr10BfdInterval

zxr10BfdSessPerfMinRxInterval		1.3.6.1.4.1.3902.3.322.1.3.1.9
This object specifies the minimum interval, in microseconds, that the local system have recieving BFD Control packets.
Status: current	Access: read-only
OBJECT-TYPE
	Zxr10BfdInterval

zxr10BfdSessPerfMaxRxInterval		1.3.6.1.4.1.3902.3.322.1.3.1.10
This object specifies the maximum interval, in microseconds, that the local system have recieving BFD Control packets.
Status: current	Access: read-only
OBJECT-TYPE
	Zxr10BfdInterval

zxr10BfdSessPerfAvgRxInterval		1.3.6.1.4.1.3902.3.322.1.3.1.11
This object specifies the average interval, in microseconds, that the local system have recieving BFD Control packets.
Status: current	Access: read-only
OBJECT-TYPE
	Zxr10BfdInterval

zxr10BfdSessName2IndexTable		1.3.6.1.4.1.3902.3.322.1.4
This table specifies the relationship between BFD Session Name and Session Index.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Zxr10BfdSessName2IndexEntry

zxr10BfdSessName2IndexEntry		1.3.6.1.4.1.3902.3.322.1.4.1
The BFD Session Entry describes the relationship between BFD Session Name and Session Index.
Status: current	Access: not-accessible
OBJECT-TYPE
	Zxr10BfdSessName2IndexEntry

zxr10BfdSessName2IndexSessName		1.3.6.1.4.1.3902.3.322.1.4.1.1
The name of this BFD session.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

zxr10BfdSessName2IndexSessIndex		1.3.6.1.4.1.3902.3.322.1.4.1.2
This object contains an index used to represent a unique BFD session on this device.
Status: current	Access: read-only
OBJECT-TYPE
	Zxr10BfdSessIndexTC

zxr10BfdIntfParaTable		1.3.6.1.4.1.3902.3.322.1.5
This table specifies the BFD time parameters of interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Zxr10BfdIntfParaEntry

zxr10BfdIntfParaEntry		1.3.6.1.4.1.3902.3.322.1.5.1
The BFD Session Entry describes BFD time parameters of interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	Zxr10BfdIntfParaEntry

zxr10BfdIntfParaIntfName		1.3.6.1.4.1.3902.3.322.1.5.1.1
The name of interface.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

zxr10BfdIntfParaInterval		1.3.6.1.4.1.3902.3.322.1.5.1.2
This object specifies the minimum interval, in microseconds, that the local system would like to use when transmitting BFD Control packets.
Status: current	Access: read-only
OBJECT-TYPE
	Zxr10BfdInterval

zxr10BfdIntfParaMinRx		1.3.6.1.4.1.3902.3.322.1.5.1.3
This object specifies the minimum interval, in microseconds, between received BFD Control packets the local system is capable of supporting.
Status: current	Access: read-only
OBJECT-TYPE
	Zxr10BfdInterval

zxr10BfdIntfParaMultiplier		1.3.6.1.4.1.3902.3.322.1.5.1.4
This object specifies the Detect time multiplier.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

zxr10BfdSessUp		1.3.6.1.4.1.3902.3.322.0.1
This notification is generated when the zxr10BfdSessState object for one or more contiguous entries in zxr10BfdSessTable are about to enter the up(4) state from some other state. The included values of zxr10BfdSessDiag MUST both be set equal to this new state (i.e: up(4)). The two instances of zxr10BfdSessDiag in this notification indicate the range of indexes that are affected. Note that all the indexes of the two ends of the range can be derived from the instance identifiers of these two objects. For the cases where a contiguous range of sessions have transitioned into the up(4) state at roughly the same time, the device SHOULD issue a single notification for each range of contiguous indexes in an effort to minimize the emission of a large number of notifications. If a notification has to be issued for just a single zxr10BfdSessEntry, then the instance identifier (and values) of the two Zxr10BfdSessIndexTC objects MUST be the identical.
Status: current	Access: read-only
NOTIFICATION-TYPE

zxr10BfdSessDown		1.3.6.1.4.1.3902.3.322.0.2
This notification is generated when the zxr10BfdSessState object for one or more contiguous entries in zxr10BfdSessTable are about to enter the down(2) or adminDown(1) states from some other state. The included values of zxr10BfdSessDiag MUST both be set equal to this new state (i.e: down(2) or adminDown(1)). The two instances of zxr10BfdSessDiag in this notification indicate the range of indexes that are affected. Note that all the indexes of the two ends of the range can be derived from the instance identifiers of these two objects. For cases where a contiguous range of sessions have transitioned into the down(2) or adminDown(1) states at roughly the same time, the device SHOULD issue a single notification for each range of contiguous indexes in an effort to minimize the emission of a large number of notifications. If a notification has to be issued for just a single zxr10BfdSessEntry, then the instance identifier (and values) of the two Zxr10BfdSessIndexTC objects MUST be the identical.
Status: current	Access: read-only
NOTIFICATION-TYPE

zxr10BfdStatsTable		1.3.6.1.4.1.3902.3.322.1.6
This table contains the statistics of BFD sessions.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Zxr10BfdStatsEntry

zxr10BfdStatsEntry		1.3.6.1.4.1.3902.3.322.1.6.1
The Entry describes the statistics of BFD session.
Status: current	Access: not-accessible
OBJECT-TYPE
	Zxr10BfdStatsEntry

zxr10BfdStatsType		1.3.6.1.4.1.3902.3.322.1.6.1.1
The type of this BFD session.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	all(1), singleHop(2), multiHop(3), l2Bfd(4), ldpActiveBfd(5), ldpPassiveBfd(6), pwBfd(7), rsvpTunnelActiveBfd(8), rsvpTunnelPassiveBfd(9), rsvpLspBfd(10), lagBfd(11)

zxr10BfdStatsUp		1.3.6.1.4.1.3902.3.322.1.6.1.2
This object contains the number of BFD session which state is up.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

zxr10BfdStatsDown		1.3.6.1.4.1.3902.3.322.1.6.1.3
This object contains the number of BFD session which state is down.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

zxr10BfdStatsInitOrAdmindown		1.3.6.1.4.1.3902.3.322.1.6.1.4
This object contains the number of BFD session which state is init or admin down.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32