ZTE-AN-SPAN-MIB

File: ZTE-AN-SPAN-MIB.mib (20611 bytes)

Imported modules

IF-MIB	SNMPv2-CONF	INET-ADDRESS-MIB
SNMPv2-SMI	SNMPv2-TC	ZTE-AN-IF-MIB
ZTE-AN-SMI	ZTE-AN-TC-MIB

Imported symbols

ifIndex	InterfaceIndexOrZero	OBJECT-GROUP
MODULE-COMPLIANCE	InetAddressType	InetAddress
IpAddress	Integer32	OBJECT-TYPE
MODULE-IDENTITY	DisplayString	RowStatus
MacAddress	TEXTUAL-CONVENTION	zxAnSubIfIndex
zxAnOam	ZxAnSubIfIndex

Defined Types

ZxAnSpanEntry
SEQUENCE
	zxAnSpanSessionId	Integer32
	zxAnSpanType	INTEGER
	zxAnSpanCpuPktMirrorEnable	INTEGER
	zxAnSpanCpuPktMirrorDirection	INTEGER
	zxAnSpanSrcPortList	OBJECT IDENTIFIER
	zxAnSpanSrcDirectionList	OBJECT IDENTIFIER
	zxAnSpanSrcIfIndex1	InterfaceIndexOrZero
	zxAnSpanSrcSubIfIndex1	ZxAnSubIfIndex
	zxAnSpanSrcIfIndex2	InterfaceIndexOrZero
	zxAnSpanSrcSubIfIndex2	ZxAnSubIfIndex
	zxAnSpanSrcIfIndex3	InterfaceIndexOrZero
	zxAnSpanSrcSubIfIndex3	ZxAnSubIfIndex
	zxAnSpanSrcIfIndex4	InterfaceIndexOrZero
	zxAnSpanSrcSubIfIndex4	ZxAnSubIfIndex
	zxAnSpanSrcDirection	INTEGER
	zxAnSpanDstPort	Integer32
	zxAnSpanVid	Integer32
	zxAnSpanCos	Integer32
	zxAnSpanTpid	Integer32
	zxAnSpanDstIpType	InetAddressType
	zxAnSpanDstIpAddr	InetAddress
	zxAnSpanSrcIpType	InetAddressType
	zxAnSpanSrcIpAddr	InetAddress
	zxAnSpanTtl	Integer32
	zxAnSpanDscp	Integer32
	zxAnSpanDstMac	MacAddress
	zxAnSpanSrcMac	MacAddress
	zxAnSpanDstSubIfIndex	ZxAnSubIfIndex
	zxAnSpanEncapsulateType	INTEGER
	zxAnSpanTimeRangeName	DisplayString
	zxAnSpanRowStatus	RowStatus

Defined Values

zxAnSpanMib		1.3.6.1.4.1.3902.1082.80.10
This MIB defines managed objects of ZTE SPAN.
MODULE-IDENTITY

zxAnSpanGlobalObjects		1.3.6.1.4.1.3902.1082.80.10.1
OBJECT IDENTIFIER

zxAnSpanObjects		1.3.6.1.4.1.3902.1082.80.10.2
OBJECT IDENTIFIER

zxAnSpanNotifications		1.3.6.1.4.1.3902.1082.80.10.3
OBJECT IDENTIFIER

zxAnSpanCapabilities		1.3.6.1.4.1.3902.1082.80.10.1.1
The management capabilities of SPAN. spanDstSubIndex(0): value 1 means supporting zxAnSpanDstSubIfIndex. spanSpanCpuPktMirror(1): value 1 means NOT supporting zxAnSpanCpuPktMirrorEnable and zxAnSpanCpuPktMirrorDirection. spanSrcIfIndex(2): value 1 means supporting zxAnSpanSrcIfIndex1, zxAnSpanSrcSubIfIndex1, zxAnSpanSrcIfIndex2, zxAnSpanSrcSubIfIndex2, zxAnSpanSrcIfIndex3, zxAnSpanSrcSubIfIndex3, zxAnSpanSrcIfIndex4, zxAnSpanSrcSubIfIndex4 and zxAnSpanSrcDirection, not supporting zxAnSpanSrcPortList and zxAnSpanSrcDirectionList. spanEncapsulateType(3): value 1 means supporting zxAnSpanEncapsulateType. spanTimeRangeName(4): value 1 means supporting zxAnSpanTimeRangeName. NOTE: No recommended to display it in NMS.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	spanDstSubIndex(0), spanSpanCpuPktMirror(1), spanSrcIfIndex(2), spanEncapsulateType(3), spanTimeRangeName(4)

zxAnSpanTable		1.3.6.1.4.1.3902.1082.80.10.2.2
This table represents the switched port analyzer related parameters.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZxAnSpanEntry

zxAnSpanEntry		1.3.6.1.4.1.3902.1082.80.10.2.2.1
An entry in zxAnSpanTable. The multi-variables binding rule should be complied with when a manager creates an entry. According to this rule, all the related mib variables must be included in one SNMP set operation. There are two types of variables: mandatory and optional. All of the mandatory variables must be included in one SNMP set operation. Optional variables may be included in one SNMP set operation with the mandatory variables, but must not be used alone. To create an entry of this table, the mandatory and optional variables are as below. mandatory: zxAnSpanSessionId optional : the other After an entry is created, every variable can be modified.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZxAnSpanEntry

zxAnSpanSessionId		1.3.6.1.4.1.3902.1082.80.10.2.2.1.1
The index of a session.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..16

zxAnSpanType		1.3.6.1.4.1.3902.1082.80.10.2.2.1.2
The SPAN type of a session. span(1) - Local Switched Port Analyzer. rspan(2) - Remote SPAN. erspan(3) - Enhanced Remoted SPAN. unknown(255) - Unknown. this value is read-only and can not be set to NE.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	span(1), rspan(2), erspan(3), unknown(255)

zxAnSpanCpuPktMirrorEnable		1.3.6.1.4.1.3902.1082.80.10.2.2.1.3
This object indicates whether the packets sent to the CPU are mirrored: enabled(1) - the packets sent to the CPU are mirrored. disabled(2) - the packets sent to the CPU are not mirrored.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

zxAnSpanCpuPktMirrorDirection		1.3.6.1.4.1.3902.1082.80.10.2.2.1.4
The direction of cpu packet.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	both(1), egress(2), ingress(3)

zxAnSpanSrcPortList		1.3.6.1.4.1.3902.1082.80.10.2.2.1.5
It is a sequence of some source ports. Supports ethernet interface, inner port, smartgroup. The format of portlist is like this: .ifIndex1.zxAnSubIfIndex1.ifIndex2.zxAnSubIfIndex2... \| port1 \| port2 \|... In case of no zxAnSubIfIndex, the portlist is like this: .ifIndex1.0.ifIndex2.0... \|port1 \|port2 \|...
Status: current	Access: read-create
OBJECT-TYPE
	OBJECT IDENTIFIER

zxAnSpanSrcDirectionList		1.3.6.1.4.1.3902.1082.80.10.2.2.1.6
The traffic direction list of the source port list. The format of direction list is like this: .direction1.direction2... \|port1 \|port2 \|... Each value of the sequence represents a traffic direction. The value may be followings: both(1), egress(2), ingress(3).
Status: current	Access: read-create
OBJECT-TYPE
	OBJECT IDENTIFIER

zxAnSpanSrcIfIndex1		1.3.6.1.4.1.3902.1082.80.10.2.2.1.7
The interface index of the first source port.
Status: current	Access: read-create
OBJECT-TYPE
	InterfaceIndexOrZero

zxAnSpanSrcSubIfIndex1		1.3.6.1.4.1.3902.1082.80.10.2.2.1.8
The sub-interface index of the first source port.
Status: current	Access: read-create
OBJECT-TYPE
	ZxAnSubIfIndex

zxAnSpanSrcIfIndex2		1.3.6.1.4.1.3902.1082.80.10.2.2.1.9
The interface index of the seoond source port.
Status: current	Access: read-create
OBJECT-TYPE
	InterfaceIndexOrZero

zxAnSpanSrcSubIfIndex2		1.3.6.1.4.1.3902.1082.80.10.2.2.1.10
The sub-interface index of the second source port.
Status: current	Access: read-create
OBJECT-TYPE
	ZxAnSubIfIndex

zxAnSpanSrcIfIndex3		1.3.6.1.4.1.3902.1082.80.10.2.2.1.11
The interface index of the third source port.
Status: current	Access: read-create
OBJECT-TYPE
	InterfaceIndexOrZero

zxAnSpanSrcSubIfIndex3		1.3.6.1.4.1.3902.1082.80.10.2.2.1.12
The sub-interface index of the third source port.
Status: current	Access: read-create
OBJECT-TYPE
	ZxAnSubIfIndex

zxAnSpanSrcIfIndex4		1.3.6.1.4.1.3902.1082.80.10.2.2.1.13
The interface index of the fourth source port.
Status: current	Access: read-create
OBJECT-TYPE
	InterfaceIndexOrZero

zxAnSpanSrcSubIfIndex4		1.3.6.1.4.1.3902.1082.80.10.2.2.1.14
The sub-interface index of the fourth source port.
Status: current	Access: read-create
OBJECT-TYPE
	ZxAnSubIfIndex

zxAnSpanSrcDirection		1.3.6.1.4.1.3902.1082.80.10.2.2.1.15
The traffic direction of the source ports.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	both(1), egress(2), ingress(3)

zxAnSpanDstPort		1.3.6.1.4.1.3902.1082.80.10.2.2.1.20
The ifIndex of SPAN and RSPAN destination port. Supports ethernet interface and smartgroup.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

zxAnSpanVid		1.3.6.1.4.1.3902.1082.80.10.2.2.1.21
The traffic VLAN ID of RSPAN or ERSPAN.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..4094 \| 65535

zxAnSpanCos		1.3.6.1.4.1.3902.1082.80.10.2.2.1.22
The traffic CoS of RSPAN or ERSPAN.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..7

zxAnSpanTpid		1.3.6.1.4.1.3902.1082.80.10.2.2.1.23
The traffic TPID of RSPAN or ERSPAN.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..65535

zxAnSpanDstIpType		1.3.6.1.4.1.3902.1082.80.10.2.2.1.24
The type of IP address about destination IP.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressType

zxAnSpanDstIpAddr		1.3.6.1.4.1.3902.1082.80.10.2.2.1.25
The destination IP of ERSPAN.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddress

zxAnSpanSrcIpType		1.3.6.1.4.1.3902.1082.80.10.2.2.1.26
The type of IP address about source IP.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressType

zxAnSpanSrcIpAddr		1.3.6.1.4.1.3902.1082.80.10.2.2.1.27
The source IP of ERSPAN.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddress

zxAnSpanTtl		1.3.6.1.4.1.3902.1082.80.10.2.2.1.28
The TTL of ERSPAN.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..255

zxAnSpanDscp		1.3.6.1.4.1.3902.1082.80.10.2.2.1.29
The DSCP of ERSPAN.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..63

zxAnSpanDstMac		1.3.6.1.4.1.3902.1082.80.10.2.2.1.30
The destination MAC address of ERSPAN.
Status: current	Access: read-only
OBJECT-TYPE
	MacAddress

zxAnSpanSrcMac		1.3.6.1.4.1.3902.1082.80.10.2.2.1.31
The source MAC address of ERSPAN.
Status: current	Access: read-only
OBJECT-TYPE
	MacAddress

zxAnSpanDstSubIfIndex		1.3.6.1.4.1.3902.1082.80.10.2.2.1.32
The sub-interface index of destination port.
Status: current	Access: read-create
OBJECT-TYPE
	ZxAnSubIfIndex

zxAnSpanEncapsulateType		1.3.6.1.4.1.3902.1082.80.10.2.2.1.33
The encapsulation type of ERSPAN. gre(1): Generic routing encapsulation(GRE). udp(2): UDP encapsulation.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	gre(1), udp(2)

zxAnSpanTimeRangeName		1.3.6.1.4.1.3902.1082.80.10.2.2.1.34
Name of the time range. Empty string means all the time the session is valid.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..32)

zxAnSpanRowStatus		1.3.6.1.4.1.3902.1082.80.10.2.2.1.50
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnAclEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

zxAnSpanConformance		1.3.6.1.4.1.3902.1082.80.10.4
OBJECT IDENTIFIER

zxAnSpanCompliances		1.3.6.1.4.1.3902.1082.80.10.4.1
OBJECT IDENTIFIER

zxAnSpanCompliance		1.3.6.1.4.1.3902.1082.80.10.4.1.1
The compliance statement for the ZTE-AN-MONITOR-MIB.
Status: current	Access: read-create
MODULE-COMPLIANCE

zxAnSpanGroups		1.3.6.1.4.1.3902.1082.80.10.4.2
OBJECT IDENTIFIER

zxAnSpanGroup		1.3.6.1.4.1.3902.1082.80.10.4.2.1
A collection of objects providing the access control list configuration information.
Status: current	Access: read-create
OBJECT-GROUP