ZTE-AN-PON-PROTECTION-MIB

File: ZTE-AN-PON-PROTECTION-MIB.mib (35444 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
INET-ADDRESS-MIB ZTE-AN-SMI IF-MIB
ZTE-AN-IF-MIB ZTE-AN-PON-TC-MIB ZTE-AN-PON-BASE-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Integer32 Unsigned32 OBJECT-GROUP
NOTIFICATION-GROUP MODULE-COMPLIANCE enterprises
RowStatus InetAddress InetAddressType
zxAnPon DisplayString ifIndex
InterfaceIndex zxAnSubIfIndex ZxAnPonOnuIndex
zxAnPonOnuIndex

Defined Types

ZxAnPonProtectGroupEntry  
SEQUENCE    
  zxAnPonProtectGroupId Unsigned32
  zxAnPonProtectGroupName DisplayString
  zxAnPonProtectGroupWorkPort InterfaceIndex
  zxAnPonProtectGroupProtectPort InterfaceIndex
  zxAnPonProtectType INTEGER
  zxAnPonProtectSubType INTEGER
  zxAnPonProtectSystemMode INTEGER
  zxAnPonProtectPeerAddrType InetAddressType
  zxAnPonProtectPeerIpAddr InetAddress
  zxAnPonProtectSpanNeEncryptKey DisplayString
  zxAnPonProtectGroupRowStatus RowStatus

ZxAnPonProtectGroupPropEntry  
SEQUENCE    
  zxAnPonProtectActiveChannel INTEGER
  zxAnPonProtectRevertMode INTEGER
  zxAnPonProtectWtrInterval Integer32
  zxAnPonProtectLastApsRequest INTEGER
  zxAnPonProtectWorkLinkStatus INTEGER
  zxAnPonProtectPrtcLinkStatus INTEGER
  zxAnPonProtectPonAlmDuration Integer32

ZxAnPonProtectActionEntry  
SEQUENCE    
  zxAnPonProtectSwitchCommand INTEGER
  zxAnPonProtectSwitchOnuList OCTET STRING

ZxAnPonProtectGroupExtPropEntry  
SEQUENCE    
  zxAnPonProtectWorkChannelOnuId Integer32
  zxAnPonProtectChannelOnuId Integer32
  zxAnPonProtectOnuActiveChannel INTEGER
  zxAnPonProtectOnuLastApsRequest INTEGER
  zxAnPonProtectOnuWorkLinkStatus INTEGER
  zxAnPonProtectOnuPrtcLinkStatus INTEGER
  zxAnPonProtectOnuLinkAlmDuration Integer32
  zxAnPonProtectExtPropRowStatus RowStatus

Defined Values

zxAnPonProtectionMib 1.3.6.1.4.1.3902.1082.500.5
The MIB module for the management of PON protection.
MODULE-IDENTITY    

zxAnPonProtectionGlobalObjects 1.3.6.1.4.1.3902.1082.500.5.1
OBJECT IDENTIFIER    

zxAnPonProtectionObjects 1.3.6.1.4.1.3902.1082.500.5.2
OBJECT IDENTIFIER    

zxAnPonProtectionNotifications 1.3.6.1.4.1.3902.1082.500.5.3
OBJECT IDENTIFIER    

zxAnPonProtectGroupNextIndex 1.3.6.1.4.1.3902.1082.500.5.1.1
This object contains the value to be used for zxAnPonProtectGroupId when creating entries in the zxAnPonProtectGroupTable. The value 0 indicates that no unassigned entries are available. To obtain the value of zxAnPonProtectGroupNextIndex for a new entry in the zxAnPonProtectGroupTable, the manager issues a management protocol retrieval operation. The agent will determine through its local policy when this index value will be made available for reuse.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxAnPonProtectDataSyncProgress 1.3.6.1.4.1.3902.1082.500.5.1.2
This object indicates the executing percentage of the data synchronizing procedure.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxAnPonProtectSpanNeUdpPort 1.3.6.1.4.1.3902.1082.500.5.1.3
The UDP port, this port is used for span NE protection communication.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1024..65535  

zxAnPonProtectCapabilities 1.3.6.1.4.1.3902.1082.500.5.1.100
The PON capabilities of this equipment. The bit value 1 means the function represented by this bit is supported by this equipment. bit 0: value 1 means support span NE protection encryption key. NOTE: No recommended to display it in NMS.
Status: current Access: read-only
OBJECT-TYPE    
  BITS spanNeEncryptKey(0)  

zxAnPonProtectGroupTable 1.3.6.1.4.1.3902.1082.500.5.2.1
Protection group configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnPonProtectGroupEntry

zxAnPonProtectGroupEntry 1.3.6.1.4.1.3902.1082.500.5.2.1.1
Pon protection group entry. Entries in the zxAnPonProtectGroupTable are created and deleted using the zxAnPonProtectGroupRowStatus object, modify is prohibited. The multi-variables binding rule should be complied with when a manager configures protection group. According to this rule, all the related mib variables must be included in one SNMP set operation. There are two types of variables: mandatory and optional. All of the mandatory variables must be included in one SNMP set operation. Optional variables may be included in one SNMP set operation with the mandatory variables, but must not be used alone. To create protection group, the mandatory and optional variables are as follows: mandatoty: zxAnPonProtectGroupName, zxAnPonProtectGroupWorkPort, zxAnPonProtectGroupProtectPort, zxAnPonProtectType optional:none
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnPonProtectGroupEntry  

zxAnPonProtectGroupId 1.3.6.1.4.1.3902.1082.500.5.2.1.1.1
Identifier of a PON protection group. The available group id can be derived from 'zxAnPonProtectGroupNextIndex'.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..65535  

zxAnPonProtectGroupName 1.3.6.1.4.1.3902.1082.500.5.2.1.1.2
Name of a PON protection group.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..32)  

zxAnPonProtectGroupWorkPort 1.3.6.1.4.1.3902.1082.500.5.2.1.1.3
Same as ifIndex: |-------------+----------|------------|---------|---------| |InterfaceType| Rack No. | Shelf No. | Slot No.| Port No.| | 1 (4bits) | (4bits) | (8bits) | (8bits) | (8bits) | +-------------+----------+------------+---------+---------+
Status: current Access: read-create
OBJECT-TYPE    
  InterfaceIndex  

zxAnPonProtectGroupProtectPort 1.3.6.1.4.1.3902.1082.500.5.2.1.1.4
Same as ifIndex: |-------------+----------|------------|---------|---------| |InterfaceType| Rack No. | Shelf No. | Slot No.| Port No.| | 1 (4bits) | (4bits) | (8bits) | (8bits) | (8bits) | +-------------+----------+------------+---------+---------+
Status: current Access: read-create
OBJECT-TYPE    
  InterfaceIndex  

zxAnPonProtectType 1.3.6.1.4.1.3902.1082.500.5.2.1.1.5
PON protection type. 1 - TYPE A protection 2 - TYPE B protection 3 - TYPE C protection 4 - TYPE D protection
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER typeA(1), typeB(2), typeC(3), typeD(4)  

zxAnPonProtectSubType 1.3.6.1.4.1.3902.1082.500.5.2.1.1.6
Not supported. PON protection structure type. subType1 - 1+1 protection subType2 - 1:1 proteciton subType3 - protection supportting load balance.
Status: deprecated Access: read-create
OBJECT-TYPE    
  INTEGER subType1(1), subType2(2), subType3(3)  

zxAnPonProtectSystemMode 1.3.6.1.4.1.3902.1082.500.5.2.1.1.7
The system mode of PON protection.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER sameNe(1), spanNeAsWorkPort(2), spanNeAsProtectionPort(3)  

zxAnPonProtectPeerAddrType 1.3.6.1.4.1.3902.1082.500.5.2.1.1.8
IP address type to be used by a peer IP host. When 'zxAnPonProtectSystemMode' is 'spanNeAsWorkPort' or 'spanNeAsProtectionPort', then this attribute is valid.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

zxAnPonProtectPeerIpAddr 1.3.6.1.4.1.3902.1082.500.5.2.1.1.9
IP address to be used by a peer IP host. When 'zxAnPonProtectSystemMode' is 'spanNeAsWorkPort' or 'spanNeAsProtectionPort' then this attribute is valid.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress  

zxAnPonProtectSpanNeEncryptKey 1.3.6.1.4.1.3902.1082.500.5.2.1.1.10
The encryption key, this attribute is used for span NE protection communication and it is valid when zxAnPonProtectSystemMode is 'spanNeAsWorkPort' or 'spanNeAsProtectionPort'. The empty string indicates no configuration.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..16)  

zxAnPonProtectGroupRowStatus 1.3.6.1.4.1.3902.1082.500.5.2.1.1.50
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4). In particular, a newly created row cannot be created until the corresponding zxAnPonProtectGroupId zxAnPonProtectGroupName zxAnPonProtectGroupWorkPort zxAnPonProtectGroupProtectPort zxAnPonProtectType have been set. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxAnPonProtectGroupPropTable 1.3.6.1.4.1.3902.1082.500.5.2.2
Protection group property.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnPonProtectGroupPropEntry

zxAnPonProtectGroupPropEntry 1.3.6.1.4.1.3902.1082.500.5.2.2.1
Property of a PON protection group.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnPonProtectGroupPropEntry  

zxAnPonProtectActiveChannel 1.3.6.1.4.1.3902.1082.500.5.2.2.1.1
The channel activated.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), workChannel(2), protectChannel(3)  

zxAnPonProtectRevertMode 1.3.6.1.4.1.3902.1082.500.5.2.2.1.2
Protection revertive mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER revertive(1), nonRevertive(2)  

zxAnPonProtectWtrInterval 1.3.6.1.4.1.3902.1082.500.5.2.2.1.3
Wait retrieve time.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..86400  

zxAnPonProtectLastApsRequest 1.3.6.1.4.1.3902.1082.500.5.2.2.1.4
The last automatic protection switch request status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER noRequest(1), doNotRevert(2), reverseRequest(3), exercise(4), waitToRestore(5), manualSwitchToProtection(6), manualSwitchToWork(7), workSignalDegrade(8), protectionSignalDegrade(9), workSignalFail(10), protectionSignalFail(11), forcedSwitchToProtection(12), forcedSwitchToWork(13), lockoutOfProtection(14)  

zxAnPonProtectWorkLinkStatus 1.3.6.1.4.1.3902.1082.500.5.2.2.1.5
The working link status of PON protection group. na(1): the working link of PON protection group is in not available status. noAlarm(2): the working link of PON protection group is in no alarm status. signalDegraded(3): the working link of PON protection group is in signal degraded status. signalFailed(4): the working link of PON protection group is in signal failed status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER na(1), noAlarm(2), signalDegraded(3), signalFailed(4)  

zxAnPonProtectPrtcLinkStatus 1.3.6.1.4.1.3902.1082.500.5.2.2.1.6
The protected link status of PON protection group. na(1): the working link of PON protection group is in not available status. noAlarm(2): the working link of PON protection group is in no alarm status. signalDegraded(3): the working link of PON protection group is in signal degraded status. signalFailed(4): the working link of PON protection group is in signal failed status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER na(1), noAlarm(2), signalDegraded(3), signalFailed(4)  

zxAnPonProtectPonAlmDuration 1.3.6.1.4.1.3902.1082.500.5.2.2.1.7
The zxAnPonProtectPonLinkFaultAlm trap duration.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxAnPonProtectActionTable 1.3.6.1.4.1.3902.1082.500.5.2.3
Protection action.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnPonProtectActionEntry

zxAnPonProtectActionEntry 1.3.6.1.4.1.3902.1082.500.5.2.3.1
Action of a PON protection group.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnPonProtectActionEntry  

zxAnPonProtectSwitchCommand 1.3.6.1.4.1.3902.1082.500.5.2.3.1.1
Switch command.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER forceP2w(1), forceW2p(2), manualP2w(3), manualW2p(4), clearAll(5), lockoutProtection(6)  

zxAnPonProtectSwitchOnuList 1.3.6.1.4.1.3902.1082.500.5.2.3.1.2
ONU list, in order to switch ONU protection. First to find out the work PON port by 'zxAnPonProtectGroupId',then the ONUs all belong to the work PON port. The use of 32-octet specifies 256 ONU. Each octet within this field specifies a set of eight ONUs, with the first octet specifying ONU 1 through 8, the second octet specifying ONU 9 through 16, etc. If that bit has a value of '1' then indicates ONU exists. Reading operation is prohibited.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(32)  

zxAnPonProtectGroupExtPropTable 1.3.6.1.4.1.3902.1082.500.5.2.4
PON protection group extended property table, only for type C and type D protection.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnPonProtectGroupExtPropEntry

zxAnPonProtectGroupExtPropEntry 1.3.6.1.4.1.3902.1082.500.5.2.4.1
PON protection group extend property entry, only for type C and type D protection. Entries in the zxAnPonProtectGroupExtPropTable are created and deleted using the zxAnPonProtectExtPropRowStatus object. modify is prohibited. The multi-variables binding rule should be complied with when a manager configures protection group. According to this rule, all the related mib variables must be included in one SNMP set operation. There are two types of variables: mandatory and optional. All of the mandatory variables must be included in one SNMP set operation. Optional variables may be included in one SNMP set operation with the mandatory variables, but must not be used alone. To create protection group extend property, the mandatory and optional variables are as follows: mandatoty: zxAnPonProtectProtectChannelOnuId optional:none
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnPonProtectGroupExtPropEntry  

zxAnPonProtectWorkChannelOnuId 1.3.6.1.4.1.3902.1082.500.5.2.4.1.1
Master ONU ID. The ONU must has been configured at the work port before.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..128  

zxAnPonProtectChannelOnuId 1.3.6.1.4.1.3902.1082.500.5.2.4.1.2
Slave ONU ID. The ONU must has been configured at the protect port before.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..128  

zxAnPonProtectOnuActiveChannel 1.3.6.1.4.1.3902.1082.500.5.2.4.1.3
Active channel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), workChannel(2), protectChannel(3)  

zxAnPonProtectOnuLastApsRequest 1.3.6.1.4.1.3902.1082.500.5.2.4.1.4
ONU last automatic protection switch request status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER noRequest(1), doNotRevert(2), reverseRequest(3), exercise(4), waitToRestore(5), manualSwitchToProtection(6), manualSwitchToWork(7), workSignalDegrade(8), protectionSignalDegrade(9), workSignalFail(10), protectionSignalFail(11), forcedSwitchToProtection(12), forcedSwitchToWork(13), lockoutOfProtection(14)  

zxAnPonProtectOnuWorkLinkStatus 1.3.6.1.4.1.3902.1082.500.5.2.4.1.5
The working ONU link status. na(1): the working link of PON protection group is in not available status. noAlarm(2): the working link of PON protection group is in no alarm status. signalDegraded(3): the working link of PON protection group is in signal degraded status. signalFailed(4): the working link of PON protection group is in signal failed status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER na(1), noAlarm(2), signalDegraded(3), signalFailed(4)  

zxAnPonProtectOnuPrtcLinkStatus 1.3.6.1.4.1.3902.1082.500.5.2.4.1.6
The protection ONU link status. na(1): the working link of PON protection group is in not available status. noAlarm(2): the working link of PON protection group is in no alarm status. signalDegraded(3): the working link of PON protection group is in signal degraded status. signalFailed(4): the working link of PON protection group is in signal failed status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER na(1), noAlarm(2), signalDegraded(3), signalFailed(4)  

zxAnPonProtectOnuLinkAlmDuration 1.3.6.1.4.1.3902.1082.500.5.2.4.1.7
The trap zxAnPonProtectOnuLinkFaultAlm duration.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxAnPonProtectExtPropRowStatus 1.3.6.1.4.1.3902.1082.500.5.2.4.1.50
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4). In particular, a newly created row cannot be created until the corresponding zxAnPonProtectWorkChannelOnuId and zxAnPonProtectChannelOnuId have been set. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxAnPonProtectSwitchEvent 1.3.6.1.4.1.3902.1082.500.5.3.1
Switch event.
Status: current Access: read-create
NOTIFICATION-TYPE    

zxAnPonProtectPonLinkFaultAlm 1.3.6.1.4.1.3902.1082.500.5.3.2
The alarm occured when the working channel or protection channel is in alarm status.
Status: current Access: read-create
NOTIFICATION-TYPE    

zxAnPonProtectPonLinkFaultClr 1.3.6.1.4.1.3902.1082.500.5.3.3
The alarm cleared when the working channel and protection channel are in no-alarm status.
Status: current Access: read-create
NOTIFICATION-TYPE    

zxAnPonProtectOnuLinkFaultAlm 1.3.6.1.4.1.3902.1082.500.5.3.4
The alarm occured when the ONU working channel or ONU protection channel is in alarm status.
Status: current Access: read-create
NOTIFICATION-TYPE    

zxAnPonProtectOnuLinkFaultClr 1.3.6.1.4.1.3902.1082.500.5.3.5
The alarm cleared when the ONU working channel and ONU protection channel are in no-alarm status.
Status: current Access: read-create
NOTIFICATION-TYPE    

zxAnPonProtectionConformance 1.3.6.1.4.1.3902.1082.500.5.4
OBJECT IDENTIFIER    

zxAnPonProtectionCompliances 1.3.6.1.4.1.3902.1082.500.5.4.1
OBJECT IDENTIFIER    

zxAnPonProtectionGroups 1.3.6.1.4.1.3902.1082.500.5.4.2
OBJECT IDENTIFIER    

zxAnPonProtectionCompliance 1.3.6.1.4.1.3902.1082.500.5.4.1.1
The compliance statement for entities which implement the ZTE-AN-PONPROTECTION-MIB.
Status: current Access: read-create
MODULE-COMPLIANCE    

zxAnPonProtectionMgmtGroup 1.3.6.1.4.1.3902.1082.500.5.4.2.1
A collection of objects for PON protection configuration.
Status: current Access: read-create
OBJECT-GROUP    

zxAnPonProtectionTrapGroup 1.3.6.1.4.1.3902.1082.500.5.4.2.2
A collection of notifications.
Status: current Access: read-create
NOTIFICATION-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor