XYLAN-SOFT-PVC-MIB

File: XYLAN-SOFT-PVC-MIB.mib (40839 bytes)

Imported modules

RFC-1215	RFC-1212	RFC1155-SMI
XYLAN-CSM-MIB	RFC1213-MIB	XYLAN-BASE-MIB
SNMPv2-SMI

Imported symbols

TRAP-TYPE	OBJECT-TYPE	Counter
AtmxTrafficDescrParamIndex	DisplayString	xylanCsmArch
Gauge32

Defined Types

TruthValue
INTEGER	true(1), false(2)

AtmxSoftPvcBbcIndex
INTEGER	0..2048

AtmxCurrentlyFailingSoftPVccEntry
SEQUENCE
	atmxCurrentlyFailingSoftPVccSlotIndex	INTEGER
	atmxCurrentlyFailingSoftPVccPortIndex	INTEGER
	atmxCurrentlyFailingSoftPVccVpi	INTEGER
	atmxCurrentlyFailingSoftPVccVci	INTEGER
	atmxCurrentlyFailingSoftPVccLeafReference	INTEGER
	atmxCurrentlyFailingSoftPVccTimeStamp	DisplayString

AtmxCurrentlyFailingSoftPVpcEntry
SEQUENCE
	atmxCurrentlyFailingSoftPVpcSlotIndex	INTEGER
	atmxCurrentlyFailingSoftPVpcPortIndex	INTEGER
	atmxCurrentlyFailingSoftPVpcVpi	INTEGER
	atmxCurrentlyFailingSoftPVpcLeafReference	INTEGER
	atmxCurrentlyFailingSoftPVpcTimeStamp	DisplayString

XylnatmSoftPVpcEntry
SEQUENCE
	xylnatmSoftPVpcSlotIndex	INTEGER
	xylnatmSoftPVpcPortIndex	INTEGER
	xylnatmSoftPVpcVpi	INTEGER
	xylnatmSoftPVpcLeafReference	INTEGER
	xylnatmSoftPVpcTargetAddress	DisplayString
	xylnatmSoftPVpcTargetSelectType	INTEGER
	xylnatmSoftPVpcTargetVpi	INTEGER
	xylnatmSoftPVpcLastReleaseCause	INTEGER
	xylnatmSoftPVpcLastReleaseDiagnostic	OCTET STRING
	xylnatmSoftPVpcOperStatus	INTEGER
	xylnatmSoftPVpcRestart	INTEGER
	xylnatmSoftPVpcRetryInterval	INTEGER
	xylnatmSoftPVpcRetryTimer	INTEGER
	xylnatmSoftPVpcRetryThreshold	INTEGER
	xylnatmSoftPVpcRetryFailures	Gauge32
	xylnatmSoftPVpcRetryLimit	INTEGER
	xylnatmSoftPVpcLowTDIndex	AtmxTrafficDescrParamIndex
	xylnatmSoftPVpcHighTDIndex	AtmxTrafficDescrParamIndex
	xylnatmSoftPVpcLastChange	DisplayString
	xylnatmSoftPVpcOutSlot	INTEGER
	xylnatmSoftPVpcOutPort	INTEGER
	xylnatmSoftPVpcOutVpi	INTEGER
	xylnatmSoftPVpcAdminStatus	INTEGER
	xylnatmSoftPVpcCrossConnectIdentifier	INTEGER
	xylnatmSoftPVpcBbcIndex	INTEGER
	xylnatmSoftPVpcRowStatus	INTEGER

XylnatmSoftPVccEntry
SEQUENCE
	xylnatmSoftPVccSlotIndex	INTEGER
	xylnatmSoftPVccPortIndex	INTEGER
	xylnatmSoftPVccVpi	INTEGER
	xylnatmSoftPVccVci	INTEGER
	xylnatmSoftPVccLeafReference	INTEGER
	xylnatmSoftPVccTargetAddress	DisplayString
	xylnatmSoftPVccTargetSelectType	INTEGER
	xylnatmSoftPVccTargetVpi	INTEGER
	xylnatmSoftPVccTargetVci	INTEGER
	xylnatmSoftPVccLastReleaseCause	INTEGER
	xylnatmSoftPVccLastReleaseDiagnostic	OCTET STRING
	xylnatmSoftPVccOperStatus	INTEGER
	xylnatmSoftPVccRestart	INTEGER
	xylnatmSoftPVccRetryInterval	INTEGER
	xylnatmSoftPVccRetryTimer	INTEGER
	xylnatmSoftPVccRetryThreshold	INTEGER
	xylnatmSoftPVccRetryFailures	Gauge32
	xylnatmSoftPVccRetryLimit	INTEGER
	xylnatmSoftPVccLowTDIndex	AtmxTrafficDescrParamIndex
	xylnatmSoftPVccHighTDIndex	AtmxTrafficDescrParamIndex
	xylnatmSoftPVccLastChange	DisplayString
	xylnatmSoftPVccOutSlot	INTEGER
	xylnatmSoftPVccOutPort	INTEGER
	xylnatmSoftPVccOutVpi	INTEGER
	xylnatmSoftPVccOutVci	INTEGER
	xylnatmSoftPVccAdminStatus	INTEGER
	xylnatmSoftPVccCrossConnectIdentifier	INTEGER
	xylnatmSoftPVccBbcIndex	INTEGER
	xylnatmSoftPVccRowStatus	INTEGER

AtmxSoftPvcBbcEntry
SEQUENCE
	atmxSoftPvcBbcIndex	AtmxSoftPvcBbcIndex
	atmxSoftPvcBbcClass	INTEGER
	atmxSoftPvcBbcTrafficType	INTEGER
	atmxSoftPvcBbcTimingRequirements	INTEGER
	atmxSoftPvcBbcSusceptibilityToClipping	INTEGER
	atmxSoftPvcBbcUserPlaneConnectionConfig	INTEGER
	atmxSoftPvcBbcRowStatus	INTEGER

Defined Values

atmxSoftPvcMIB		1.3.6.1.4.1.800.2.9.2
OBJECT IDENTIFIER

atmxSoftPvcMIBObjects		1.3.6.1.4.1.800.2.9.2.1
OBJECT IDENTIFIER

atmxSoftPvcMIBTraps		1.3.6.1.4.1.800.2.9.2.2
OBJECT IDENTIFIER

atmxSoftPvcBaseGroup		1.3.6.1.4.1.800.2.9.2.1.1
OBJECT IDENTIFIER

atmxSoftPvcCallFailuresTrapEnable		1.3.6.1.4.1.800.2.9.2.1.1.1
Allows the generation of traps in response to call failures. By default, this object is set to 'false'.
Status: mandatory	Access: read-write
OBJECT-TYPE
	TruthValue

atmxSoftPvcCallFailures		1.3.6.1.4.1.800.2.9.2.1.1.2
The number of times a series of call attempts has failed to establish a Soft PVCC or Soft PVPC. The number of call attempts in a series is determined by atmSoftPVccRetryThreshold or atmSoftPVpcRetryThreshold, respectively.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmxSoftPvcCurrentlyFailingSoftPVccs		1.3.6.1.4.1.800.2.9.2.1.1.3
The current number of Soft PVCCs for which there is an active row in the atmSoftPVccTable having an atmSoftPVccOperStatus with a value other than 'connected'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge32

atmxSoftPvcCurrentlyFailingSoftPVpcs		1.3.6.1.4.1.800.2.9.2.1.1.4
The current number of Soft PVPCs for which there is an active row in the atmSoftPVpcTable having an atmSoftPVpcOperStatus with a value other than 'connected'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge32

atmxSoftPvcNotificationInterval		1.3.6.1.4.1.800.2.9.2.1.1.5
The minimum interval between the sending of atmSoftPvcCallFailuresTrap notifications.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmxCurrentlyFailingSoftPVccTable		1.3.6.1.4.1.800.2.9.2.1.2
A table indicating all Soft Permanent Virtual Channel Connections (Soft PVCCs) for which the atmSoftPVccRowStatus is 'active' and the atmSoftPVccOperStatus is other than 'connected'.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AtmxCurrentlyFailingSoftPVccEntry

atmxCurrentlyFailingSoftPVccEntry		1.3.6.1.4.1.800.2.9.2.1.2.1
Each entry in this table represents a Soft Permanent Virtual Channel Connection (Soft PVCC) for which the atmSoftPVccRowStatus is 'active' and the atmSoftPVccOperStatus is other than 'connected'.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AtmxCurrentlyFailingSoftPVccEntry

atmxCurrentlyFailingSoftPVccSlotIndex		1.3.6.1.4.1.800.2.9.2.1.2.1.1
The slot instance
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER

atmxCurrentlyFailingSoftPVccPortIndex		1.3.6.1.4.1.800.2.9.2.1.2.1.2
The port instance
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER

atmxCurrentlyFailingSoftPVccVpi		1.3.6.1.4.1.800.2.9.2.1.2.1.3
The vpi instance
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER

atmxCurrentlyFailingSoftPVccVci		1.3.6.1.4.1.800.2.9.2.1.2.1.4
The vci instance
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER

atmxCurrentlyFailingSoftPVccLeafReference		1.3.6.1.4.1.800.2.9.2.1.2.1.5
The leaf reference
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER

atmxCurrentlyFailingSoftPVccTimeStamp		1.3.6.1.4.1.800.2.9.2.1.2.1.6
The time at which this Soft PVCC began to fail.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

atmxCurrentlyFailingSoftPVpcTable		1.3.6.1.4.1.800.2.9.2.1.3
A table indicating all Soft Permanent Virtual Path Connections (Soft PVPCs) for which the atmSoftPVpcRowStatus is 'active' and the atmSoftPVpcOperStatus is other than 'connected'.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AtmxCurrentlyFailingSoftPVpcEntry

atmxCurrentlyFailingSoftPVpcEntry		1.3.6.1.4.1.800.2.9.2.1.3.1
Each entry in this table represents a Soft Permanent Virtual Path Connection (Soft PVPC) for which the atmSoftPVpcRowStatus is 'active' and the atmSoftPVpcOperStatus is other than 'connected'.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AtmxCurrentlyFailingSoftPVpcEntry

atmxCurrentlyFailingSoftPVpcSlotIndex		1.3.6.1.4.1.800.2.9.2.1.3.1.1
The slot instance
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER

atmxCurrentlyFailingSoftPVpcPortIndex		1.3.6.1.4.1.800.2.9.2.1.3.1.2
The port instance
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER

atmxCurrentlyFailingSoftPVpcVpi		1.3.6.1.4.1.800.2.9.2.1.3.1.3
The vpi instance
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER

atmxCurrentlyFailingSoftPVpcLeafReference		1.3.6.1.4.1.800.2.9.2.1.3.1.4
The leaf reference
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER

atmxCurrentlyFailingSoftPVpcTimeStamp		1.3.6.1.4.1.800.2.9.2.1.3.1.5
The time at which this Soft PVPC began to fail.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

xylnatmSoftPVpcTable		1.3.6.1.4.1.800.2.9.2.1.4
The (conceptual) table used to manage Soft Permanent Virtual Path Connections (Soft PVPCs) The Soft PVPC table is applicable only to switches.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		XylnatmSoftPVpcEntry

xylnatmSoftPVpcEntry		1.3.6.1.4.1.800.2.9.2.1.4.1
Each entry in this table represents a Soft Permanent Virtual Path Connection (Soft PVPC) originating at a switch interface. A Soft PVPC is a VPC that is: - provisioned at the originating (source) interface of the connection - established by signalling procedures across a network to a destination interface. When a row is made active, an attempt is made to set up a switched connection to an interface at the destination switch. No objects (other than atmSoftPVpcRowStatus) can be set while the row is active. At the destination, the VPL may be defined (but not cross-connected) prior to arrival of the Setup request. The combination of slot/port, atmVplVpi specified in the index clause of this entry serves to identify the VPL on the source interface. The atmSoftPVpcLeafReference object aids in distinguishing between leaves of a point-to-multipoint Soft PVPC.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	XylnatmSoftPVpcEntry

xylnatmSoftPVpcSlotIndex		1.3.6.1.4.1.800.2.9.2.1.4.1.1
The slot index for this vpc
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..9

xylnatmSoftPVpcPortIndex		1.3.6.1.4.1.800.2.9.2.1.4.1.2
The port number
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

xylnatmSoftPVpcVpi		1.3.6.1.4.1.800.2.9.2.1.4.1.3
The VPI value of the VPL used at the in interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..4095

xylnatmSoftPVpcLeafReference		1.3.6.1.4.1.800.2.9.2.1.4.1.4
The leaf reference for this Vpl
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..65535

xylnatmSoftPVpcTargetAddress		1.3.6.1.4.1.800.2.9.2.1.4.1.5
The target ATM Address of this Soft PVPC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

xylnatmSoftPVpcTargetSelectType		1.3.6.1.4.1.800.2.9.2.1.4.1.6
Indicates whether the target VPI value is to be used at the destination. If the value 'any' is specified, the destination switch will choose the VPI value. In such a case, once the Soft PVPC atmSoftPVpcOperStatus value is 'connected', the value of this object changes to 'required', such that the same VPI value will continue to be used even if the connection is subsequently torn down and re-established. The VPI value chosen will be available for reading in atmSoftPVpcTargetVpi. If the value 'required' is specified, then a value must be supplied for object atmSoftPVpcTargetVpi prior to activation of the row. This value is then to be used at the destination.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	required(1), any(2)

xylnatmSoftPVpcTargetVpi		1.3.6.1.4.1.800.2.9.2.1.4.1.7
The VPI value of the VPL used at the target interface. This value must be filled in when the atmSoftPVpcTargetSelectType is set to 'required'. This value is not relevant when the value of atmSoftPVpcTargetSelectType is 'any'.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..4095

xylnatmSoftPVpcLastReleaseCause		1.3.6.1.4.1.800.2.9.2.1.4.1.8
Value of the Cause field of the Cause Information Element in the last RELEASE signalling message received for this Soft PVPC. Indicates the reason for the Release.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..127

xylnatmSoftPVpcLastReleaseDiagnostic		1.3.6.1.4.1.800.2.9.2.1.4.1.9
Value of the first 8 bytes of diagnostic information from the Cause field of the Cause Information Element in the last RELEASE signalling message received for this Soft PVPC.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..8)

xylnatmSoftPVpcOperStatus		1.3.6.1.4.1.800.2.9.2.1.4.1.10
Describes the status of the Soft PVPC. When the row is not 'active', the value of this object is 'other'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), establishmentInProgress(2), connected(3), retriesExhausted(4)

xylnatmSoftPVpcRestart		1.3.6.1.4.1.800.2.9.2.1.4.1.11
When the value is set to 'restart', the Soft PVPC is released if necessary and a new setup procedure is begun. As a result of this action, the atmSoftPVpcOperStatus object transitions to 'establishmentInProgress' (if not already in this state) and the atmSoftPVpcRetryFailures object is cleared. When the value is set to 'noop', no operation is performed. When read, the value 'noop' is returned.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	restart(1), noop(2)

xylnatmSoftPVpcRetryInterval		1.3.6.1.4.1.800.2.9.2.1.4.1.12
Defines the period to wait before attempting to establish the Soft PVPC connection after the first failed call attempt. Zero represents an infinite interval indicating no retries.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..3600

xylnatmSoftPVpcRetryTimer		1.3.6.1.4.1.800.2.9.2.1.4.1.13
Indicates the current value of the retry timer for this connection. When the value reaches zero an attempt will be made to establish the Soft PVPC. When the timer is not running, the value zero shall be returned.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..86400

xylnatmSoftPVpcRetryThreshold		1.3.6.1.4.1.800.2.9.2.1.4.1.14
Indicates the number of consecutive call setup attempts for the same Soft PVPC which need to fail before the atmSoftPvcCallFailures object is incremented. A value of zero indicates that an infinite number of call attempts are required to increment the atmSoftPvcCallFailures object and thus disables alarms for the Soft PVPC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

xylnatmSoftPVpcRetryFailures		1.3.6.1.4.1.800.2.9.2.1.4.1.15
Indicates how many attempts to establish the connection have failed. This count is reset whenever a connection is successfully established or the Soft PVPC is restarted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge32

xylnatmSoftPVpcRetryLimit		1.3.6.1.4.1.800.2.9.2.1.4.1.16
Sets a maximum limit on how many consecutive unsuccessful call setup attempts can be made before stopping the attempt to set up the connection. If this limit is reached then management action will be required (e.g. setting atmSoftPVpcRestart to 'restart') to initiate a new attempt to establish the connection. A value of zero indicates no limit - the attempts will continue until successful.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

xylnatmSoftPVpcLowTDIndex		1.3.6.1.4.1.800.2.9.2.1.4.1.17
The low end Traffic Descriptor ..refer rfc1695 for details
Status: mandatory	Access: read-write
OBJECT-TYPE
	AtmxTrafficDescrParamIndex

xylnatmSoftPVpcHighTDIndex		1.3.6.1.4.1.800.2.9.2.1.4.1.18
The high end of the TD
Status: mandatory	Access: read-write
OBJECT-TYPE
	AtmxTrafficDescrParamIndex

xylnatmSoftPVpcLastChange		1.3.6.1.4.1.800.2.9.2.1.4.1.19
The value of MIB II sysUptime object at the time this VPL entered its current op state.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

xylnatmSoftPVpcOutSlot		1.3.6.1.4.1.800.2.9.2.1.4.1.20
The outgoing slot once the connection is established..else its 0
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

xylnatmSoftPVpcOutPort		1.3.6.1.4.1.800.2.9.2.1.4.1.21
The out going slot if the connection is established..else its 0
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

xylnatmSoftPVpcOutVpi		1.3.6.1.4.1.800.2.9.2.1.4.1.22
The outgoing vpi if established..else 0
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

xylnatmSoftPVpcAdminStatus		1.3.6.1.4.1.800.2.9.2.1.4.1.23
The admin status of the VPL
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

xylnatmSoftPVpcCrossConnectIdentifier		1.3.6.1.4.1.800.2.9.2.1.4.1.24
A unique non-zero value if the VPL is exiting the switch apart from the input
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

xylnatmSoftPVpcBbcIndex		1.3.6.1.4.1.800.2.9.2.1.4.1.25
The BBC Index from the BBC Table
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

xylnatmSoftPVpcRowStatus		1.3.6.1.4.1.800.2.9.2.1.4.1.26
Used to create and delete a Soft PVPC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	create(1), modify(2), delete(3), active(4), unknown(5)

xylnatmSoftPVccTable		1.3.6.1.4.1.800.2.9.2.1.5
The (conceptual) table used to manage Soft Permanent Virtual Channel Connections (Soft PVCCs). The Soft PVCC table is applicable only to switches.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		XylnatmSoftPVccEntry

xylnatmSoftPVccEntry		1.3.6.1.4.1.800.2.9.2.1.5.1
Each entry in this table represents a Soft Permanent Virtual Channel Connection (Soft PVCC) originating at a switch interface. When a row is made active, an attempt is made to set up a switched connection to an interface at the destination switch. No objects (other than atmSoftPVccRowStatus) can be set while the row is active. At the destination, the VCL may be defined (but not cross-connected) prior to arrival of the Setup request. The combination of Slot/Port, atmVclVpi, and atmVclVci specified in the index clause of this entry serves to identify the VCL on the source interface. The atmSoftPVccLeafReference object aids in distinguishing between leaves of a point-to-multipoint Soft PVCC.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	XylnatmSoftPVccEntry

xylnatmSoftPVccSlotIndex		1.3.6.1.4.1.800.2.9.2.1.5.1.1
Slot Instance
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

xylnatmSoftPVccPortIndex		1.3.6.1.4.1.800.2.9.2.1.5.1.2
Port Instance
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

xylnatmSoftPVccVpi		1.3.6.1.4.1.800.2.9.2.1.5.1.3
Vpi instance
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

xylnatmSoftPVccVci		1.3.6.1.4.1.800.2.9.2.1.5.1.4
Vcl instance
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

xylnatmSoftPVccLeafReference		1.3.6.1.4.1.800.2.9.2.1.5.1.5
An arbitrary integer which, in the case of the source VCL having an atmVclCastType of 'p2mpRoot', serves to distinguish between the multiple leaves attached to a root of a point-to-multipoint Soft PVCC. If the atmVclCastType is not 'p2mpRoot' the value 1 shall be used.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

xylnatmSoftPVccTargetAddress		1.3.6.1.4.1.800.2.9.2.1.5.1.6
The target ATM Address of this Soft PVCC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

xylnatmSoftPVccTargetSelectType		1.3.6.1.4.1.800.2.9.2.1.5.1.7
Indicates whether the target VPI/VCI values are to be used at the destination. If the value 'any' is specified, the destination switch will choose the VPI/VCI values. In such a case, once the Soft PVCC atmSoftPVccOperStatus value is 'connected', the value of this object changes to 'required', such that the same VPI/VCI values will continue to be used even if the connection is subsequently torn down and re-established. The VPI/VCI values chosen will be available for reading in atmSoftPVccTargetVpi and atmSoftPVccTargetVci. If the value 'required' is specified, then values must be supplied for objects atmSoftPVccTargetVpi and atmSoftPVccTargetVci prior to activation of the row. These values are then to be used at the destination.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	required(1), any(2)

xylnatmSoftPVccTargetVpi		1.3.6.1.4.1.800.2.9.2.1.5.1.8
The VPI value of the VCL used at the target interface. This value is not relevant when the value of atmSoftPVccTargetSelectType is 'any'.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

xylnatmSoftPVccTargetVci		1.3.6.1.4.1.800.2.9.2.1.5.1.9
The VCI value of the VCL used at the target interface. This value must be filled in when the atmSoftPVccTargetSelectType is set to 'required'.This value is not relevant when the value of atmSoftPVccTargetSelectType is 'any'.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

xylnatmSoftPVccLastReleaseCause		1.3.6.1.4.1.800.2.9.2.1.5.1.10
Value of the Cause field of the Cause Information Element in the last RELEASE signalling message received for this Soft PVCC. Indicates the reason for the Release.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

xylnatmSoftPVccLastReleaseDiagnostic		1.3.6.1.4.1.800.2.9.2.1.5.1.11
Value of the first 8 bytes of diagnostic information from the Cause field of the Cause Information Element in the last RELEASE signalling message received for this Soft PVCC.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

xylnatmSoftPVccOperStatus		1.3.6.1.4.1.800.2.9.2.1.5.1.12
Describes the status of the Soft PVCC. When the row is not 'active', the value of this object is 'other'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), establishmentInProgress(2), connected(3), retriesExhausted(4)

xylnatmSoftPVccRestart		1.3.6.1.4.1.800.2.9.2.1.5.1.13
When the value is set to 'restart' the Soft PVCC is released if necessary and a new setup procedure is begun. As a result of this action, the atmSoftPVccOperStatus object transitions to 'establishmentInProgress' (if not already in this state) and the atmSoftPVccRetryFailures object is cleared When the value is set to 'noop' no operation is performed. When read, the value 'noop' is returned.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	restart(1), noop(2)

xylnatmSoftPVccRetryInterval		1.3.6.1.4.1.800.2.9.2.1.5.1.14
Defines the period to wait before attempting to establish the Soft PVC after the first failed call attempt. Zero represents an infinite interval indicating no retries.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

xylnatmSoftPVccRetryTimer		1.3.6.1.4.1.800.2.9.2.1.5.1.15
Indicates the current value of the retry timer for this connection. When the value reaches zero an attempt will be made to establish the Soft PVCC. When the timer is not running, the value zero shall be returned.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

xylnatmSoftPVccRetryThreshold		1.3.6.1.4.1.800.2.9.2.1.5.1.16
Indicates the number of consecutive call setup attempts for the same Soft PVCC which need to fail before the atmSoftPvcCallFailures object is incremented. A value of zero indicates that an infinite number of call attempts are required to increment the atmSoftPvcCallFailures object and thus disables alarms for the Soft PVCC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

xylnatmSoftPVccRetryFailures		1.3.6.1.4.1.800.2.9.2.1.5.1.17
Indicates how many attempts to establish the connection have failed. This count is reset whenever a connection is successfully established or the Soft PVCC is restarted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge32

xylnatmSoftPVccRetryLimit		1.3.6.1.4.1.800.2.9.2.1.5.1.18
Sets a maximum limit on how many consecutive unsuccessful call setup attempts can be made before stopping the attempt to set up the connection. If this limit is reached then management action will be required (e.g. setting atmSoftPVccRestart to 'restart') to initiate a new attempt to establish the connection. A value of zero indicates no limit - the attempts will continue until successful.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

xylnatmSoftPVccLowTDIndex		1.3.6.1.4.1.800.2.9.2.1.5.1.19
The low end TD...Refer 1695 for interpretation
Status: mandatory	Access: read-write
OBJECT-TYPE
	AtmxTrafficDescrParamIndex

xylnatmSoftPVccHighTDIndex		1.3.6.1.4.1.800.2.9.2.1.5.1.20
The high end TD
Status: mandatory	Access: read-write
OBJECT-TYPE
	AtmxTrafficDescrParamIndex

xylnatmSoftPVccLastChange		1.3.6.1.4.1.800.2.9.2.1.5.1.21
The value of MIB II sysUpTime at the time this VCL entered its current operational state. If the current state was entered prior to the last re-initialization of the agent, then this object contains a zero value
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

xylnatmSoftPVccOutSlot		1.3.6.1.4.1.800.2.9.2.1.5.1.22
The outgoing slot if the connection has been established..else 0
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

xylnatmSoftPVccOutPort		1.3.6.1.4.1.800.2.9.2.1.5.1.23
The outgoing port...
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

xylnatmSoftPVccOutVpi		1.3.6.1.4.1.800.2.9.2.1.5.1.24
The outgoing vpi
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

xylnatmSoftPVccOutVci		1.3.6.1.4.1.800.2.9.2.1.5.1.25
The outgoing vci..
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

xylnatmSoftPVccAdminStatus		1.3.6.1.4.1.800.2.9.2.1.5.1.26
The admin status of this VCL
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

xylnatmSoftPVccCrossConnectIdentifier		1.3.6.1.4.1.800.2.9.2.1.5.1.27
A non zero value if the VCL is cross-connected
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

xylnatmSoftPVccBbcIndex		1.3.6.1.4.1.800.2.9.2.1.5.1.28
The BBC Index from the BBC Table
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

xylnatmSoftPVccRowStatus		1.3.6.1.4.1.800.2.9.2.1.5.1.29
Used to create and delete a Soft PVCC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	create(1), modify(2), delete(3), active(4), unknown(5)

atmxSoftPvcBbcTable		1.3.6.1.4.1.800.2.9.2.1.6
This table contains information related to ATM bearer capability type and associated parameters.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AtmxSoftPvcBbcEntry

atmxSoftPvcBbcEntry		1.3.6.1.4.1.800.2.9.2.1.6.1
An entry in this table is used to specify the bearer capa- bility of a given soft PVC.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AtmxSoftPvcBbcEntry

atmxSoftPvcBbcIndex		1.3.6.1.4.1.800.2.9.2.1.6.1.1
Identifies an entry in the atmSoftPvcBbcTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AtmxSoftPvcBbcIndex

atmxSoftPvcBbcClass		1.3.6.1.4.1.800.2.9.2.1.6.1.2
Indicates the broadband bearer capability class.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	bcobA(1), bcobC(2), bcobX(3)

atmxSoftPvcBbcTrafficType		1.3.6.1.4.1.800.2.9.2.1.6.1.3
Indicates the broadband bearer capability traffic class.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	noIndication(1), constantBitRate(2), variableBitRate(3)

atmxSoftPvcBbcTimingRequirements		1.3.6.1.4.1.800.2.9.2.1.6.1.4
Indicates the broadband bearer capability timing requirements.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	noIndication(1), endToEndTimingRequired(2), endToEndTimingNotRequired(3)

atmxSoftPvcBbcSusceptibilityToClipping		1.3.6.1.4.1.800.2.9.2.1.6.1.5
Indicates the broadband bearer capability susceptibility to clipping parameter.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	susceptibleToClipping(1), notSusceptibleToClipping(2)

atmxSoftPvcBbcUserPlaneConnectionConfig		1.3.6.1.4.1.800.2.9.2.1.6.1.6
Indicates the broadband bearer capability user plane configuration parmmeter.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	point-to-point(1), point-to-multipoint(2)

atmxSoftPvcBbcRowStatus		1.3.6.1.4.1.800.2.9.2.1.6.1.7
This object is used to create, modify, and delete rows in the 'atmSoftPvcBbcTable'.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	create(1), modify(2), delete(3), active(4), unknown(5)

atmxSoftPvcTraps		1.3.6.1.4.1.800.2.9.2.2.1
OBJECT IDENTIFIER

atmxSoftPvcTrapsPrefix		1.3.6.1.4.1.800.2.9.2.2.1.1
OBJECT IDENTIFIER

atmxSoftPvcCallFailuresTrap		1
A notification indicating that one or more series of call attempts in trying to establish a Soft PVPC or Soft PVCC have failed since the last atmSoftPvcCallFailureTrap was sent. If this trap has not been sent for the last atmSoftPvcNotificationInterval, then it will be sent on the next increment of atmSoftPvcCallFailures.
TRAP-TYPE

atmxSoftPvcMIBConformance		1.3.6.1.4.1.800.2.9.2.3
OBJECT IDENTIFIER

atmxSoftPvcMIBCompliances		1.3.6.1.4.1.800.2.9.2.3.1
OBJECT IDENTIFIER

atmxSoftPvcMIBGroups		1.3.6.1.4.1.800.2.9.2.3.2
OBJECT IDENTIFIER

atmxSoftPvcMIBCompliance		1.3.6.1.4.1.800.2.9.2.3.1.1
OBJECT IDENTIFIER

atmxSoftPvcBaseMIBGroup		1.3.6.1.4.1.800.2.9.2.3.2.1
OBJECT IDENTIFIER

atmxSoftPvcVccMIBGroup		1.3.6.1.4.1.800.2.9.2.3.2.2
OBJECT IDENTIFIER

atmxSoftPvcVpcMIBGroup		1.3.6.1.4.1.800.2.9.2.3.2.3
OBJECT IDENTIFIER

atmxSoftPvcAddressMIBGroup		1.3.6.1.4.1.800.2.9.2.3.2.4
OBJECT IDENTIFIER

atmxCurrentlyFailingSoftPVccMIBGroup		1.3.6.1.4.1.800.2.9.2.3.2.5
OBJECT IDENTIFIER

atmxCurrentlyFailingSoftPVpcMIBGroup		1.3.6.1.4.1.800.2.9.2.3.2.6
OBJECT IDENTIFIER