XYLAN-FLT-MIB
File:
XYLAN-FLT-MIB.mib (35187 bytes)
Imported modules Imported symbols Defined Types
FltGroupEntry
SEQUENCE
xylanFltGroupIndex OCTET STRING Size(30)
xylanFltGroupAdminState INTEGER
xylanFltGroupProtocol INTEGER
xylanFltGroupAdrType INTEGER
FltRuleListEntry
SEQUENCE
xylanFltRuleListIndex OCTET STRING Size(47)
xylanFltRuleListAdminState INTEGER
xylanFltRuleListRule INTEGER
FltServiceEntry
SEQUENCE
xylanFltServiceIndex OCTET STRING Size(20)
xylanFltServiceAdminState INTEGER
FltServiceNumberEntry
SEQUENCE
xylanFltServiceNumberIndex OCTET STRING Size(24)
xylanFltServiceNumberAdminState INTEGER
FltServiceGroupEntry
SEQUENCE
xylanFltServiceGroupIndex OCTET STRING Size(44)
xylanFltServiceGroupAdminState INTEGER
FltGlobalGroupEntry
SEQUENCE
xylanFltGlobalGroupIndex OCTET STRING Size(44)
xylanFltGlobalGroupAdminState INTEGER
FltGlobalServiceEntry
SEQUENCE
xylanFltGlobalServiceIndex OCTET STRING Size(44)
xylanFltGlobalServiceAdminState INTEGER
FltIpServicePortTblEntry
SEQUENCE
xylanFltIpServicePortName DisplayString Size(20)
xylanFltIpServicePortNumber INTEGER
FltIpServiceRuleTblEntry
SEQUENCE
xylanFltIpServiceRuleName DisplayString Size(20)
xylanFltIpServiceRuleID INTEGER
xylanFltIpServiceRuleDest IpAddress
xylanFltIpServiceRuleDestMask OCTET STRING Size(4)
xylanFltIpServiceRuleSrc IpAddress
xylanFltIpServiceRuleSrcMask OCTET STRING Size(4)
xylanFltIpServiceRuleDisp INTEGER
xylanFltIpServiceRuleCount INTEGER
xylanFltIpServiceRuleGroup DisplayString Size(20)
FltIpxRuleTblEntry
SEQUENCE
xylanFltIpxRuleType INTEGER
xylanFltIpxRuleID INTEGER
xylanFltIpxRuleNet OCTET STRING Size(4)
xylanFltIpxRuleNode OCTET STRING Size(6)
xylanFltIpxRuleDisp INTEGER
xylanFltIpxRuleCount INTEGER
xylanFltIpxRuleGroup DisplayString Size(20)
FltIpQuery
SEQUENCE
xylanFltIpQueryDest IpAddress
xylanFltIpQuerySrc IpAddress
xylanFltIpQueryPort INTEGER
xylanFltIpQueryDisp INTEGER
xylanFltIpQueryService DisplayString Size(20)
xylanFltIpQueryRuleID INTEGER
FltIpxQuery
SEQUENCE
xylanFltIpxQueryNetwork OCTET STRING Size(4)
xylanFltIpxQueryNode OCTET STRING Size(6)
xylanFltIpxQueryDisp INTEGER
xylanFltIpxQueryRuleType INTEGER
xylanFltIpxQueryRuleID INTEGER
Defined Values
xylanFltActiveAdminState 1.3.6.1.4.1.800.2.22.1.1
The current administrative state of the HRE-X filtering
software.
Status: mandatory Access: read-only
OBJECT-TYPE
INTEGER enabled(1), disabled(2)
xylanFltActiveOperState 1.3.6.1.4.1.800.2.22.1.2
The current operational state of the HRE-X filtering
software. This is independent of the administrative
state.
Status: mandatory Access: read-only
OBJECT-TYPE
INTEGER initializing(0), active(1), deactivating(2), inactive(3)
xylanFltConfigAdminState 1.3.6.1.4.1.800.2.22.1.3
The current configured administrative state of the
HRE-X filtering software.
Status: mandatory Access: read-write
OBJECT-TYPE
INTEGER enabled(1), disabled(2)
xylanFltCommit 1.3.6.1.4.1.800.2.22.1.4
Commits the current configuration.
Status: mandatory Access: write-only
OBJECT-TYPE
INTEGER
xylanFltGroupTable 1.3.6.1.4.1.800.2.22.2.1.1
Group entry for HRE-X filtering feature. This object
contains a collection of Group objects when contain a
list of filtering rules.
Status: mandatory Access: not-accessible
OBJECT-TYPE
SEQUENCE OF
FltGroupEntry
xylanFltGroupEntry 1.3.6.1.4.1.800.2.22.2.1.1.1
Each entry corresponds to one Group.
Status: mandatory Access: not-accessible
OBJECT-TYPE
FltGroupEntry
xylanFltGroupIndex 1.3.6.1.4.1.800.2.22.2.1.1.1.1
The group index which is the octet string of
printable characters containing
the name of the group.
Status: mandatory Access: read-only
OBJECT-TYPE
OCTET STRING Size(30)
xylanFltGroupAdminState 1.3.6.1.4.1.800.2.22.2.1.1.1.2
The current status of this group. active (1) means
the route is functioning, delete (2) tells SNMP to
delete the route
Status: mandatory Access: read-write
OBJECT-TYPE
INTEGER active(1), delete(2)
xylanFltGroupProtocol 1.3.6.1.4.1.800.2.22.2.1.1.1.3
The protocol type of the group. This has
significance with the index of the OIDs of
the rules in the group.
Status: mandatory Access: read-write
OBJECT-TYPE
INTEGER na(0), ip(1), ipx(2)
xylanFltGroupAdrType 1.3.6.1.4.1.800.2.22.2.1.1.1.4
This indicates which address is designated first.
e.g. If destination is specified, the addresses
the OIDs of the rules are ordered
.
If the group is an IPX group, this indicator does
not affect the OID.
Status: mandatory Access: read-write
OBJECT-TYPE
INTEGER na(0), destination(1), source(2)
xylanFltRuleListEntry 1.3.6.1.4.1.800.2.22.2.1.2.1
Each entry corresponds to one rule.
Status: mandatory Access: not-accessible
OBJECT-TYPE
FltRuleListEntry
xylanFltRuleListIndex 1.3.6.1.4.1.800.2.22.2.1.2.1.1
Rule index is made up of the octets of the
group name and the network addresses of the
rule. It has the following format:
IP - ,0,
IPX - ,0,
Status: mandatory Access: read-only
OBJECT-TYPE
OCTET STRING Size(47)
xylanFltRuleListAdminState 1.3.6.1.4.1.800.2.22.2.1.2.1.2
The current status of this group. active (1) means
the route is functioning, delete (2) tells SNMP to
delete the route
Status: mandatory Access: read-write
OBJECT-TYPE
INTEGER active(1), delete(2)
xylanFltRuleListRule 1.3.6.1.4.1.800.2.22.2.1.2.1.3
The rule for the address pair. 1) allows traffic for the
addresses and 2) rejects all trafic for the pair.
Status: mandatory Access: read-write
OBJECT-TYPE
INTEGER allow(1), deny(2)
xylanFltServiceTable 1.3.6.1.4.1.800.2.22.2.2.1
Service entry for HRE-X filtering feature. This object
contains a collection of IP port numbers and filtering
Group objects. Thus rules for different service such
as FTP or Telnet may be defined.
Status: mandatory Access: not-accessible
OBJECT-TYPE
SEQUENCE OF
FltServiceEntry
xylanFltServiceEntry 1.3.6.1.4.1.800.2.22.2.2.1.1
Each entry corresponds to one service.
Status: mandatory Access: not-accessible
OBJECT-TYPE
FltServiceEntry
xylanFltServiceIndex 1.3.6.1.4.1.800.2.22.2.2.1.1.1
The index is made up of an octet string of ASCII
characters containing the name of the service.
Status: mandatory Access: read-only
OBJECT-TYPE
OCTET STRING Size(20)
xylanFltServiceAdminState 1.3.6.1.4.1.800.2.22.2.2.1.1.2
The current status of this group. active (1) means
the route is functioning, delete (2) tells SNMP to
delete the route
Status: mandatory Access: read-write
OBJECT-TYPE
INTEGER active(1), delete(2)
xylanFltServiceNumberEntry 1.3.6.1.4.1.800.2.22.2.2.2.1
Each entry corresponds to one port number.
Status: mandatory Access: not-accessible
OBJECT-TYPE
FltServiceNumberEntry
xylanFltServiceNumberIndex 1.3.6.1.4.1.800.2.22.2.2.2.1.1
Service number index is made up of the octets of the
group name and the port number:
,0,
Status: mandatory Access: read-only
OBJECT-TYPE
OCTET STRING Size(24)
xylanFltServiceNumberAdminState 1.3.6.1.4.1.800.2.22.2.2.2.1.2
The current status of this group. active (1) means
the route is functioning, delete (2) tells SNMP to
delete the route
Status: mandatory Access: read-write
OBJECT-TYPE
INTEGER active(1), delete(2)
xylanFltServiceGroupEntry 1.3.6.1.4.1.800.2.22.2.2.3.1
Each entry corresponds to one group.
Status: mandatory Access: not-accessible
OBJECT-TYPE
FltServiceGroupEntry
xylanFltServiceGroupIndex 1.3.6.1.4.1.800.2.22.2.2.3.1.1
Service group index is made up of the octets of the
service name and the group name:
,0,
Status: mandatory Access: read-only
OBJECT-TYPE
OCTET STRING Size(44)
xylanFltServiceGroupAdminState 1.3.6.1.4.1.800.2.22.2.2.3.1.2
The current status of this group. active (1) means
the route is functioning, delete (2) tells SNMP to
delete the route
Status: mandatory Access: read-write
OBJECT-TYPE
INTEGER active(1), delete(2)
xylanFltGlobalIPRule 1.3.6.1.4.1.800.2.22.2.3.1
Global IP rule.
Status: mandatory Access: read-write
OBJECT-TYPE
INTEGER allow(1), deny(2)
xylanFltGlobalIPXRule 1.3.6.1.4.1.800.2.22.2.3.2
Global IPX rule.
Status: mandatory Access: read-write
OBJECT-TYPE
INTEGER allow(1), deny(2)
xylanFltGlobalPrecedence 1.3.6.1.4.1.800.2.22.2.3.3
Global rule precedence (tie breaker).
Status: mandatory Access: read-write
OBJECT-TYPE
INTEGER destination(1), source(2)
xylanFltGlobalGroupEntry 1.3.6.1.4.1.800.2.22.2.3.4.1
Each entry corresponds to one group.
Status: mandatory Access: not-accessible
OBJECT-TYPE
FltGlobalGroupEntry
xylanFltGlobalGroupIndex 1.3.6.1.4.1.800.2.22.2.3.4.1.1
Global group index is made up of the octets of the
group name.
Status: mandatory Access: read-only
OBJECT-TYPE
OCTET STRING Size(44)
xylanFltGlobalGroupAdminState 1.3.6.1.4.1.800.2.22.2.3.4.1.2
The current status of this group. active (1) means
the route is functioning, delete (2) tells SNMP to
delete the route
Status: mandatory Access: read-write
OBJECT-TYPE
INTEGER active(1), delete(2)
xylanFltGlobalServiceEntry 1.3.6.1.4.1.800.2.22.2.3.5.1
Each entry corresponds to one service.
Status: mandatory Access: not-accessible
OBJECT-TYPE
FltGlobalServiceEntry
xylanFltGlobalServiceIndex 1.3.6.1.4.1.800.2.22.2.3.5.1.1
Global service index is made up of the octets of the
service name.
Status: mandatory Access: read-only
OBJECT-TYPE
OCTET STRING Size(44)
xylanFltGlobalServiceAdminState 1.3.6.1.4.1.800.2.22.2.3.5.1.2
The current status of this service. active (1) means
the route is functioning, delete (2) tells SNMP to
delete the route
Status: mandatory Access: read-write
OBJECT-TYPE
INTEGER active(1), delete(2)
xylanFltIpServicePortTblEntry 1.3.6.1.4.1.800.2.22.3.1.1
Entry in table that maps a service name to the list of
TCP ports it represents.
Status: mandatory Access: not-accessible
OBJECT-TYPE
FltIpServicePortTblEntry
xylanFltIpServicePortNumber 1.3.6.1.4.1.800.2.22.3.1.1.2
TCP port number assigned to a service for HRE-X Filtering
Engine.
Status: mandatory Access: read-only
OBJECT-TYPE
INTEGER
xylanFltIpServiceRuleTbl 1.3.6.1.4.1.800.2.22.3.2
Table that maps a service name to the list of filtering
rules. This includes the special service, GLOBAL, which
is comprised of the global rules.
Status: mandatory Access: not-accessible
OBJECT-TYPE
SEQUENCE OF
FltIpServiceRuleTblEntry
xylanFltIpServiceRuleTblEntry 1.3.6.1.4.1.800.2.22.3.2.1
Entry in table that maps a service name (or GLOBAL for global
rules to its list of filtering rules.
Status: mandatory Access: not-accessible
OBJECT-TYPE
FltIpServiceRuleTblEntry
xylanFltIpServiceRuleName 1.3.6.1.4.1.800.2.22.3.2.1.1
Name of service (or Global for global rules) for HRE-X Filtering
Engine.
Status: mandatory Access: read-only
OBJECT-TYPE
DisplayString Size(20)
xylanFltIpServiceRuleID 1.3.6.1.4.1.800.2.22.3.2.1.2
Rule ID for filtering rule.
Status: mandatory Access: read-only
OBJECT-TYPE
INTEGER
xylanFltIpServiceRuleDestMask 1.3.6.1.4.1.800.2.22.3.2.1.4
The destination address mask.
Status: mandatory Access: read-only
OBJECT-TYPE
OCTET STRING Size(4)
xylanFltIpServiceRuleSrcMask 1.3.6.1.4.1.800.2.22.3.2.1.6
The source address mask.
Status: mandatory Access: read-only
OBJECT-TYPE
OCTET STRING Size(4)
xylanFltIpServiceRuleDisp 1.3.6.1.4.1.800.2.22.3.2.1.7
The disposition for the filtering rule.
Status: mandatory Access: read-only
OBJECT-TYPE
INTEGER allow(1), deny(2)
xylanFltIpServiceRuleCount 1.3.6.1.4.1.800.2.22.3.2.1.8
The number of times the filtering rule has been applied.
Status: mandatory Access: read-only
OBJECT-TYPE
INTEGER
xylanFltIpxRuleTblEntry 1.3.6.1.4.1.800.2.22.3.3.1
Entry in table of IPX filtering rules.
Status: mandatory Access: not-accessible
OBJECT-TYPE
FltIpxRuleTblEntry
xylanFltIpxRuleType 1.3.6.1.4.1.800.2.22.3.3.1.1
IPX rules are categorized into four types:
Full Address - both the network number and node must
match for the rule to be applied
Node - only the node must match for the rule to be
applied
Network - only the network number must match for the
rule to be applied
Global - this rule type always matches
Full Address has the highest precedence, followed by
Node, Network, and then Global.
Status: mandatory Access: read-only
OBJECT-TYPE
INTEGER invalid(0), full-address(1), node(2), network(3), global(4)
xylanFltIpxRuleID 1.3.6.1.4.1.800.2.22.3.3.1.2
Rule ID for filtering rule.
Status: mandatory Access: read-only
OBJECT-TYPE
INTEGER
xylanFltIpxRuleNet 1.3.6.1.4.1.800.2.22.3.3.1.3
Destination IPX network.
Status: mandatory Access: read-only
OBJECT-TYPE
OCTET STRING Size(4)
xylanFltIpxRuleNode 1.3.6.1.4.1.800.2.22.3.3.1.4
Destination IPX node.
Status: mandatory Access: read-only
OBJECT-TYPE
OCTET STRING Size(6)
xylanFltIpxRuleDisp 1.3.6.1.4.1.800.2.22.3.3.1.5
The disposition for the filtering rule.
Status: mandatory Access: read-only
OBJECT-TYPE
INTEGER allow(1), deny(2)
xylanFltIpxRuleCount 1.3.6.1.4.1.800.2.22.3.3.1.6
The number of times the filtering rule has been applied.
Status: mandatory Access: read-only
OBJECT-TYPE
INTEGER
xylanFltIpxRuleGroup 1.3.6.1.4.1.800.2.22.3.3.1.7
Name of group in which the filtering rule is defined.
Status: mandatory Access: read-only
OBJECT-TYPE
DisplayString Size(20)
xylanFltIpQueries 1.3.6.1.4.1.800.2.22.3.4
IP flow result queries.
Status: mandatory Access: not-accessible
OBJECT-TYPE
SEQUENCE OF
FltIpQuery
xylanFltIpQuery 1.3.6.1.4.1.800.2.22.3.4.1
IP flow result query.
Status: mandatory Access: not-accessible
OBJECT-TYPE
FltIpQuery
xylanFltIpQueryDest 1.3.6.1.4.1.800.2.22.3.4.1.1
Destination IP address to be used in the query.
Status: mandatory Access: read-only
OBJECT-TYPE
IpAddress
xylanFltIpQuerySrc 1.3.6.1.4.1.800.2.22.3.4.1.2
Source IP address to be used in the query.
Status: mandatory Access: read-only
OBJECT-TYPE
IpAddress
xylanFltIpQueryPort 1.3.6.1.4.1.800.2.22.3.4.1.3
Destination TCP port to be used in the query. 0
is an indication to not use the port.
Status: mandatory Access: read-only
OBJECT-TYPE
INTEGER 0..65535
xylanFltIpQueryDisp 1.3.6.1.4.1.800.2.22.3.4.1.4
The disposition that results from the query.
Status: mandatory Access: read-only
OBJECT-TYPE
INTEGER allow(1), deny(2)
xylanFltIpQueryService 1.3.6.1.4.1.800.2.22.3.4.1.5
Service that contains the rule that is applied to
determine the disposition of the query. The empty
string indicates no rule applied.
Status: mandatory Access: read-only
OBJECT-TYPE
DisplayString Size(20)
xylanFltIpQueryRuleID 1.3.6.1.4.1.800.2.22.3.4.1.6
Rule ID used to determine the disposition for the
query. -1 indicates no rule applied.
Status: mandatory Access: read-only
OBJECT-TYPE
INTEGER
xylanFltIpxQueries 1.3.6.1.4.1.800.2.22.3.5
IPX flow result queries.
Status: mandatory Access: not-accessible
OBJECT-TYPE
SEQUENCE OF
FltIpxQuery
xylanFltIpxQueryNetwork 1.3.6.1.4.1.800.2.22.3.5.1.1
Destination IPX network for query.
Status: mandatory Access: read-only
OBJECT-TYPE
OCTET STRING Size(4)
xylanFltIpxQueryNode 1.3.6.1.4.1.800.2.22.3.5.1.2
Destination IPX node for query.
Status: mandatory Access: read-only
OBJECT-TYPE
OCTET STRING Size(6)
xylanFltIpxQueryDisp 1.3.6.1.4.1.800.2.22.3.5.1.3
The disposition that results from the query.
Status: mandatory Access: read-only
OBJECT-TYPE
INTEGER allow(1), deny(2)
xylanFltIpxQueryRuleType 1.3.6.1.4.1.800.2.22.3.5.1.4
IPX rules are categorized into four types:
Full Address - both the network number and node must
match for the rule to be applied
Node - only the node must match for the rule to be
applied
Network - only the network number must match for the
rule to be applied
Global - this rule type always matches
Full Address has the highest precedence, followed by
Node, Network, and then Global.
Status: mandatory Access: read-only
OBJECT-TYPE
INTEGER no-rule-applies(0), full-address(1), node(2), network(3), global(4)
xylanFltIpxQueryRuleID 1.3.6.1.4.1.800.2.22.3.5.1.5
Rule ID used to determine the disposition for the
query. -1 is used when no rule applied.
Status: mandatory Access: read-only
OBJECT-TYPE
INTEGER
xylanFltActDefaultIpDisp 1.3.6.1.4.1.800.2.22.3.6
The current default IP disposition if no other rule applies.
Status: mandatory Access: read-only
OBJECT-TYPE
INTEGER allow(1), deny(2)
xylanFltActIpPrecedence 1.3.6.1.4.1.800.2.22.3.7
The current precedence for IP rules.
Status: mandatory Access: read-only
OBJECT-TYPE
INTEGER destination(1), source(2)
xylanFltActDefaultIpxDisp 1.3.6.1.4.1.800.2.22.3.8
The current default IPX disposition if no other rule applies.
Status: mandatory Access: read-only
OBJECT-TYPE
INTEGER allow(1), deny(2)
xylanFltLastIpDenySrc 1.3.6.1.4.1.800.2.22.4.1.1
Source IP address for last denied route by HRE-X
Filtering.
Status: mandatory Access: read-only
OBJECT-TYPE
IpAddress
xylanFltLastIpDenyDest 1.3.6.1.4.1.800.2.22.4.1.2
Destination IP address for last denied route by HRE-X
Filtering.
Status: mandatory Access: read-only
OBJECT-TYPE
IpAddress
xylanFltLastIpDenyPort 1.3.6.1.4.1.800.2.22.4.1.3
Destination IP address for last denied route by HRE-X
Filtering.
Status: mandatory Access: read-only
OBJECT-TYPE
INTEGER
xylanFltLastIpxDenyNet 1.3.6.1.4.1.800.2.22.4.2.1
Destination IPX network for last denied route by HRE-X
Filtering.
Status: mandatory Access: read-only
OBJECT-TYPE
OCTET STRING Size(4)
xylanFltLastIpxDenyNode 1.3.6.1.4.1.800.2.22.4.2.2
Destination IPX node for last denied route by HRE-X
Filtering.
Status: mandatory Access: read-only
OBJECT-TYPE
OCTET STRING Size(6)
xylanFltLastCommitTrapReason 1.3.6.1.4.1.800.2.22.4.3.1
The reason for the last HRE-X Filtering COMMIT trap;
the valid reasons are:
0 - No trap has been sent.
1 - A service that was referenced from the global
configuration could not be found.
2 - A group that was referenced from the GLOBAL
level or some other service could not be found.
3 - An IPX rule was found in a group assigned to a
service rather than the GLOBAL level.
4 - The same port was assigned to two services.
5 - The same service name appears twice.
6 - The same IPX address has two rules associated with
it.
Status: mandatory Access: read-only
OBJECT-TYPE
INTEGER no-trap-sent(0), service-not-found(1), group-not-found(2), ipx-in-non-global-group(3), port-in-two-services(4), duplicate-service-names(5), same-ipx-address-for-two-rules(6)
xylanFltLastCommitTrapEntity1 1.3.6.1.4.1.800.2.22.4.3.2
An entity associated with the last HRE-X Filtering
COMMIT trap; the value depends on the value of the last
xylanFltLastCommitTrapReason. These are:
0 - The data is invalid.
1 - The name of the service that was referenced.
2 - The name of the service that referenced the group.
3 - The name of the service that contained the IPX rule.
4 - The name of the first service to include the port.
This service will retain the port.
5 - The service name that appears twice.
6 - The name of the group that contains the second
rule for the same IPX address.
Status: mandatory Access: read-only
OBJECT-TYPE
DisplayString Size(20)
xylanFltLastCommitTrapEntity2 1.3.6.1.4.1.800.2.22.4.3.3
An entity associated with the last HRE-X Filtering
COMMIT trap; the value depends on the value of the last
xylanFltLastCommitTrapReason. These are:
0 - The data is invalid.
1 - This data item is unused.
2 - The name of the group that could not be found.
3 - The name of the group that contained the IPX rule.
4 - The name of the second service to include the port.
This service will not retain the port.
5 - This data item is unused.
6 - The name of the group that contains the first rule
for an IPX address for which there is a duplicate.
Status: optional Access: read-only
OBJECT-TYPE
DisplayString Size(20)
xylanFltLastCommitTrapPort 1.3.6.1.4.1.800.2.22.4.3.4
The port number associated with the last HRE-X Filtering
COMMIT trap; the value depends on the value of the last
xylanFltLastCommitTrapReason. These are:
0 - The data is invalid.
1 - This data item is unused.
2 - This data item is unused.
3 - This data item is unused.
4 - The port that was assigned to two services.
5 - This data item is unused.
6 - This data item is unused.
Status: optional Access: read-only
OBJECT-TYPE
INTEGER
xylanFltLastCommitTrapIpxNet 1.3.6.1.4.1.800.2.22.4.3.5
Destination IPX network for last HRE-X Filtering COMMIT
trap; the value depends on the value of the last
xylanFltLastCommitTrapReason. These are:
0 - The data is invalid.
1 - This data item is unused.
2 - This data item is unused.
3 - This data item is unused.
4 - This data item is unused.
5 - This data item is unused.
6 - Contains the IPX network number for which there
was a duplicate rule.
Status: optional Access: read-only
OBJECT-TYPE
OCTET STRING Size(4)
xylanFltLastCommitTrapIpxNode 1.3.6.1.4.1.800.2.22.4.3.6
Destination IPX node for last HRE-X Filtering COMMIT
trap; the value depends on the value of the last
xylanFltLastCommitTrapReason. These are:
0 - The data is invalid.
1 - This data item is unused.
2 - This data item is unused.
3 - This data item is unused.
4 - This data item is unused.
5 - This data item is unused.
6 - Contains the IPX node address for which there
was a duplicate rule.
Status: optional Access: read-only
OBJECT-TYPE
OCTET STRING Size(6)
