XLDV20-MIB

File: XLDV20-MIB.mib (780955 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC RFC1155-SMI
RFC-1212 RFC-1215 AN-MIB

Imported symbols

Counter32 Gauge32 Unsigned32
Integer32 TEXTUAL-CONVENTION IpAddress
TimeTicks OBJECT-TYPE TRAP-TYPE
onu

Defined Types

Xldv20ControlStatus  
INTEGER requestIdle(1), requestBusy(2), requestPassed(3), requestFailed(4)    

Xldv20OperState  
INTEGER enabled(1), disabled(2)    

Xldv20SlotStatus  
INTEGER unknown(0), used(1), empty(2)    

Xldv20AdminState  
INTEGER unlocked(1), locked(2)    

Xldv20AvailStatus  
INTEGER available(1), failed(2), degraded(3), offline(4), notInstalled(5), dependency(7)    

Xldv20LinkState  
INTEGER quiet(0), idle(1), train(2), active(3), download(4), remoteDownload(6), sleepMode(7), unknown(255)    

Xldv20DbuReadStatus  
INTEGER dbuReadComplete(7081), dbuReadFailed(7082), dbuFileCreationFailed(7083), dbuFileTransmissionFailed(7084)    

Xldv20TelnetAccess  
INTEGER read(1), trace(2), write(3), noAccess(4)    

Xldv20TvTelnetSessionStatus  
INTEGER running(1), stopped(2)    

Xldv20EndpointType  
INTEGER source(1), sink(2), both(3)    

Xldv20RstResult  
INTEGER requestFailed(4)    

Xldv20ImaGroupState  
INTEGER notConfigured(1), startUp(2), startUpAck(3), configAbortUnsupported(4), configAbortIncompatibleSymmetry(5), configAbortOther(6), insufficientLinks(7), blocked(8), operational(9), configAbortUnsupportedImaVersion(10)    

Xldv20ImaGroupFailureStatus  
INTEGER noFailure(1), startUpNe(2), startUpFe(3), invalidValueNe(4), invalidValueFe(5), failedAssymetricNe(6), failedAssymetricFe(7), insufficientLinksNe(8), insufficientLinksFe(9), blockedNe(10), blockedFe(11), otherFailure(12), invalidImaVersionNe(13), invalidImaVersionFe(14)    

Xldv20ImaGroupTxClkMode  
INTEGER ctc(1), itc(2)    

Xldv20ImaGroupSymmetry  
INTEGER symmetricOperation(1), asymmetricOperation(2), asymmetricConfiguration(3)    

Xldv20ImaFrameLength  
INTEGER m32(32), m64(64), m128(128), m256(256)    

Xldv20ImaLinkState  
INTEGER notInGroup(1), unusableNoGivenReason(2), unusableFault(3), unusableMisconnected(4), unusableInhibited(5), unusableFailed(6), usable(7), active(8)    

Xldv20ImaLinkFailureStatus  
INTEGER noFailure(1), imaLinkFailure(2), lifFailure(3), lodsFailure(4), misConnected(5), blocked(6), fault(7), farEndTxLinkUnusable(8), farEndRxLinkUnusable(9)    

DisplayString  
OCTET STRING Size(0..255)    

Unsigned16  
Textual convention for a 16 bit integer value.
TEXTUAL-CONVENTION    
  INTEGER 0..65535  

MilliSeconds  
Integer32    

Xldv20HwUnitType  
INTEGER equipment(1), equipmentHolder(2), plugInUnit(3)    

Xldv20IfType  
INTEGER s1n(1), s1f(2), adc(3), adr(4), ibm(5), tca(6), pon(7), vdc(8), vdr(9), eth(10), d3n(11), d3f(12), e3n(13), e3f(14), s3n(15), s3f(16), e1nIma(20), e1fIma(21), d1nIma(22), d1fIma(23), sdc(24), sdr(25), atmIma(107)    

Xldv20AlarmState  
INTEGER noAlarm(0), hpEBER(1), hpUNEQ(2), lcd(3), lof(4), lop(5), los(6), msAIS(7), msEBER(8), msRDI(9), msSD(10), pAIS(11), pRDI(12), rsEBER(13), slm(14), tim(15), actFault(16), xmissionErr(105), ais(114), rdi(115), plcpLof(116), plcpRDI(117), internalFault(123), immMNR(130), lpr(131), lol(132), wrongServiceConfigData(141), excBER(407), lif(408), lods(409), txUnusableFe(410), rxUnusableFe(411), rfiIma(412), rai(413), startUpFe(450), configAbort(451), configAbortFe(452), insufficientLinks(453), insufficientLinksFe(454), blockedFe(455), imaMinNumOfLinks(456)    

Xldv20SuppressionType  
INTEGER noTraps(1), allTraps(2), noEvents(3), noAlarms(4)    

Xldv20TrafficType  
INTEGER cbr(1), ubr(2), nrtVbr(3), rtVbr(4)    

Xldv20TrafficDirection  
INTEGER bidirectional(1), upstream(2), downstream(3)    

Xldv20EqhType  
INTEGER shelf(1), slot(2), basicShelf(3), extendedShelf(4), ntAdslShelf(5), ntVdslShelf(6), cpeShelf(7)    

Xldv20LineType  
INTEGER other(1), shortSingleMode(2), mediumSingleMode(3), longSingleMode(4), coax(5), utp(6), e3direct(7), ds3plcp(8)    

Xldv20S1nS3nEberThreshold  
INTEGER exp10E3(1), exp10E4(2), exp10E5(3), noSupervision(255)    

Xldv20S1nS3nSDThreshold  
INTEGER exp10E5(3), exp10E6(4), exp10E7(5), exp10E8(6), exp10E9(7), noSupervision(255)    

Xldv20AlarmSeverity  
INTEGER critical(1), major(2), minor(3), warning(4), noAlarming(5)    

Xldv20AlmSevProfileIndex  
INTEGER 1..40    

Xldv20AlmFiltProfileIndex  
INTEGER 1..40    

Xldv20RiResultType  
INTEGER riRemoteInventoryComplete(1), riFileCreationFailed(2), riFileTransmissionFailed(3)    

Xldv20RowStatus  
INTEGER create(1), delete(2)    

Xldv20CodingType  
INTEGER e3HDB3(1), dsx3B3ZS(2)    

Xldv20ExtAlarmActivityState  
INTEGER undeterminate(0), on(1), off(2)    

Xldv20EmptyCellType  
INTEGER idle(1), unassigned(2)    

Xldv20LogType  
INTEGER hwmLog(1), sweLog(2), swTraceLog(3)    

Xldv20SucAllOfType  
INTEGER sucUpgrSingle(1), sucUpgrAll(2), sucLoadTypeUnknown(10)    

Xldv20ResetLevel  
INTEGER plugInUnit(3), system(4)    

Xldv20VdcRateDn  
INTEGER rateDn2(2), rateDn4(4), rateDn6(6), rateDn8(8), rateDn12(12), rateDn16(16), rateDn24(24), rateDn32(32), rateDn48(48), rateDn64(64)    

Xldv20VdcRateUp  
INTEGER rateUp1(1), rateUp2(2), rateUp4(4), rateUp8(8), rateUp12(12), rateUp16(16)    

Xldv20VdcLatencyDn  
INTEGER latencyDn0(0), latencyDn2(2), latencyDn4(4), latencyDn8(8), latencyDn12(12), latencyDn16(16), latencyDn20(20), latencyDn32(32)    

Xldv20VdcLatencyUp  
INTEGER latencyUp0(0), latencyUp2(2), latencyUp4(4), latencyUp8(8), latencyUp10(10), latencyUp20(20)    

Xldv20VdcPowerBoostAdaptationType  
INTEGER suEnabled(1), ntEnabled(2), bothEnabled(3), bothDisabled(4)    

Xldv20VdcVdslMode  
INTEGER adslFriendly(1), vdslEfficient(2)    

Xldv20VdcPsdMask  
INTEGER m1(1), m2(2)    

Xldv20EthNtMode  
INTEGER bridging(1), routing(2), currentConfiguration(4)    

Xldv20E3nPayloadType  
INTEGER unequipped(1), nonSpecific(2), atm(3)    

Xldv20CallpAlarmState  
INTEGER noAlarm(1), alarmPresent(2)    

Xldv20TpAlarmState  
INTEGER noAlarm(1), upstreamAlarm(2), downstreamAlarm(3), upAndDownstreamAlarm(4)    

Xldv20Latency  
INTEGER interleavedLow(0), interleavedHigh(1), fast(256)    

Xldv20TestType  
INTEGER segment(1), endToEnd(2)    

Xldv20FlowDirection  
INTEGER undefined(1), inwards(2), outwards(3)    

Xldv20OamLevel  
INTEGER undefined(0), f1(1), f2(2), f3(3), f4(4), f5(5)    

Xldv20TrapIds  
INTEGER trNoTrapId(0), trHpExcBER(1), trHpUNEQ(2), trLcd(3), trLof(4), trLop(5), trLos(6), trMsAIS(7), trMsExcBER(8), trMsRDI(9), trMsSD(10), trPAIS(11), trPRDI(12), trRsExcBER(13), trSlm(14), trTim(15), trActFault(16), trReplaceableUnitTypeMismatch(17), trReplaceableUnitFailure(18), trReplaceableUnitProblem(19), trReplaceableUnitNotInstalled(20), trReplaceableUnitSwMismatch(21), trReplaceableUnitReset(22), trReplaceableUnitResetEnd(23), trStartupEnd(24), trLctSession(25), trAgentRunning(26), trRstResult(27), trPltTestResult(28), trStateChangeAdmin(29), trStateChangeOper(30), trChangeRate(31), trCmuReadyForReset(32), trAltTestResult(33), trActivateLoadResult(34), trPUUpgradeSucc(35), trUpgradeCancelled(36), trFtpError(38), trSweLogRead(40), trHwmLogRead(41), trTraceLogRead(42), trActCcReload(44), trVplCcCreation(45), trVplCcDeletion(46), trObjCreate(100), trObjDelete(101), trXmissionErr(105), trExternalAlarm(110), trUnitReadyForReset(111), trHwuControl(112), trReplaceableUnitRemoved(113), trAIS(114), trRDI(115), trPlcpLof(116), trPlcpRDI(117), trRemInvReady(118), trDbBackup(119), trSwVersionSet(120), trReadSAPSContentFileReady(121), trReplaceableUnitSwMissing(122), trInternalFault(123), trAttributeValueChange(124), trVclCcCreation(127), trVclCcDeletion(128), trImmMNR(130), trLpr(131), trLol(132), trAtmLayerMultiAlarm(135), trTelnetSession(136), trVplCACProblem(137), trVclCACProblem(139), trVplTpReload(140), trWrongServiceConfigData(141), trReplaceableUnitPlugged(142), trReplaceableUnitUnplugged(143), trStateChangeOperExt(144), trLOC(145), trDbRestore(150), trUpgradeEndRequestResult(151), trUnitUpgradeNotRequested(152), trThresholdCrossingAlert(200), trVpcTpCreation(400), trVpcTpDeletion(401), trVpcTpCACProblem(402), trContinuityCheckVpEntryCreated(403), trContinuityCheckVpEntryDeleted(404), trContinuityCheckVcEntryCreated(405), trContinuityCheckVcEntryDeleted(406), trExcBER(407), trLif(408), trLods(409), trTxUnusableFe(410), trRxUnusableFe(411), trRfiIma(412), trRAI(413), trStartUpFe(450), trConfigAbort(451), trConfigAbortFe(452), trInsufficientLinks(453), trInsufficientLinksFe(454), trBlockedFe(455), trImaMinNumOfLinks(456), trStateChangeAvail(457), trMaxTrapId(458)    

Xldv20Requester  
INTEGER tmn(1), hwm(2)    

Xldv20TimeZone  
INTEGER gmt-12Eniwetok(1), gmt-11MidwayIslandsSamoa(2), gmt-10Hawaii(3), gmt-9Alaska(4), gmt-8TijuanaLosAngelesSeattleVancouver(5), gmt-7ArizonaDenverSaltLakeCityCalgary(6), gmt-6ChicagoDallasKansasCityWinnipeg(7), gmt-6MexicoCityTegucigalpaSaskatchewan(8), gmt-5BogotaLimaQuito(9), gmt-5IndianaEast(10), gmt-5NewYorkMiamiAtlantaDetroitToronto(11), gmt-4CaracasLaPazMontrealQuebec(12), gmt-330Neufundland(13), gmt-3BrasiliaBuenosAiresGeorgetown(14), gmt-2MiddleAtlantic(15), gmt-1AzorenKaverdIslands(16), gmtCasablancaDublinLissabonLondon(17), gmt1AmsterdamMadridParisBelgradZagreb(18), gmt1BerlinBernRomeStockholmVienna(19), gmt1BudapestPrahaBratislavaWarschau(20), gmt2AthensIstanbulMinskBukarest(21), gmt2HararePretoriaHelsinkiRevalRiga(22), gmt2IsraelKairo(23), gmt3BagdadKuwaitErRiad(24), gmt3MoskowStPetersburgWolgograd(25), gmt3Nairobi(26), gmt330Teheran(27), gmt4AbuDhabiMuskatBakuTiflis(28), gmt430Kabul(29), gmt5IslamabadKarartschiTaschkent(30), gmt5Jekaterinburg(31), gmt530BombayKaluttaMadrasNewDehli(32), gmt6AkmolaAlmaAtaDhakaColombo(33), gmt7BangkokHanoiJakarta(34), gmt8PekingChongqingHongkongUrumchi(35), gmt8PerthSingapurTaipeh(36), gmt9IrkutskOsakaSapporoTokyoSeoul(37), gmt930AdelaideDarwin(38), gmt10BrisbaneCanberraMlebourneSydney(39), gmt10GuamPortMoresbyHobart(40), gmt10Wladiwostok(41), gmt11MagadanSalomonenNewCaledonia(42), gmt12AucklandWellington(43), gmt12FidschiKamtschatkaMarschallIslands(44)    

Xldv20DayLightSavingTime  
INTEGER summerTime1(1), summerTime2(2), winterTime(10)    

Xldv20AdslMargin  
INTEGER dB-127(-127), dB-126(-126), dB-125(-125), dB-124(-124), dB-123(-123), dB-122(-122), dB-121(-121), dB-120(-120), dB-119(-119), dB-118(-118), dB-117(-117), dB-116(-116), dB-115(-115), dB-114(-114), dB-113(-113), dB-112(-112), dB-111(-111), dB-110(-110), dB-109(-109), dB-108(-108), dB-107(-107), dB-106(-106), dB-105(-105), dB-104(-104), dB-103(-103), dB-102(-102), dB-101(-101), dB-100(-100), dB-99(-99), dB-98(-98), dB-97(-97), dB-96(-96), dB-95(-95), dB-94(-94), dB-93(-93), dB-92(-92), dB-91(-91), dB-90(-90), dB-89(-89), dB-88(-88), dB-87(-87), dB-86(-86), dB-85(-85), dB-84(-84), dB-83(-83), dB-82(-82), dB-81(-81), dB-80(-80), dB-79(-79), dB-78(-78), dB-77(-77), dB-76(-76), dB-75(-75), dB-74(-74), dB-73(-73), dB-72(-72), dB-71(-71), dB-70(-70), dB-69(-69), dB-68(-68), dB-67(-67), dB-66(-66), dB-65(-65), dB-64(-64), dB-63(-63), dB-62(-62), dB-61(-61), dB-60(-60), dB-59(-59), dB-58(-58), dB-57(-57), dB-56(-56), dB-55(-55), dB-54(-54), dB-53(-53), dB-52(-52), dB-51(-51), dB-50(-50), dB-49(-49), dB-48(-48), dB-47(-47), dB-46(-46), dB-45(-45), dB-44(-44), dB-43(-43), dB-42(-42), dB-41(-41), dB-40(-40), dB-39(-39), dB-38(-38), dB-37(-37), dB-36(-36), dB-35(-35), dB-34(-34), dB-33(-33), dB-32(-32), dB-31(-31), dB-30(-30), dB-29(-29), dB-28(-28), dB-27(-27), dB-26(-26), dB-25(-25), dB-24(-24), dB-23(-23), dB-22(-22), dB-21(-21), dB-20(-20), dB-19(-19), dB-18(-18), dB-17(-17), dB-16(-16), dB-15(-15), dB-14(-14), dB-13(-13), dB-12(-12), dB-11(-11), dB-10(-10), dB-9(-9), dB-8(-8), dB-7(-7), dB-6(-6), dB-5(-5), dB-4(-4), dB-3(-3), dB-2(-2), dB-1(-1), dB0(0), dB1(1), dB2(2), dB3(3), dB4(4), dB5(5), dB6(6), dB7(7), dB8(8), dB9(9), dB10(10), dB11(11), dB12(12), dB13(13), dB14(14), dB15(15), dB16(16), dB17(17), dB18(18), dB19(19), dB20(20), dB21(21), dB22(22), dB23(23), dB24(24), dB25(25), dB26(26), dB27(27), dB28(28), dB29(29), dB30(30), dB31(31), dB32(32), dB33(33), dB34(34), dB35(35), dB36(36), dB37(37), dB38(38), dB39(39), dB40(40), dB41(41), dB42(42), dB43(43), dB44(44), dB45(45), dB46(46), dB47(47), dB48(48), dB49(49), dB50(50), dB51(51), dB52(52), dB53(53), dB54(54), dB55(55), dB56(56), dB57(57), dB58(58), dB59(59), dB60(60), dB61(61), dB62(62), dB63(63), dB64(64), dB65(65), dB66(66), dB67(67), dB68(68), dB69(69), dB70(70), dB71(71), dB72(72), dB73(73), dB74(74), dB75(75), dB76(76), dB77(77), dB78(78), dB79(79), dB80(80), dB81(81), dB82(82), dB83(83), dB84(84), dB85(85), dB86(86), dB87(87), dB88(88), dB89(89), dB90(90), dB91(91), dB92(92), dB93(93), dB94(94), dB95(95), dB96(96), dB97(97), dB98(98), dB99(99), dB100(100), dB101(101), dB102(102), dB103(103), dB104(104), dB105(105), dB106(106), dB107(107), dB108(108), dB109(109), dB110(110), dB111(111), dB112(112), dB113(113), dB114(114), dB115(115), dB116(116), dB117(117), dB118(118), dB119(119), dB120(120), dB121(121), dB122(122), dB123(123), dB124(124), dB125(125), dB126(126), dB127(127), dB128(128), marginNotApplicable(32766), marginInvalid(32767)    

Xldv20AdslAttenuation  
INTEGER dB0(0), dB0Dot5(1), dB1(2), dB1Dot5(3), dB2(4), dB2Dot5(5), dB3(6), dB3Dot5(7), dB4(8), dB4Dot5(9), dB5(10), dB5Dot5(11), dB6(12), dB6Dot5(13), dB7(14), dB7Dot5(15), dB8(16), dB8Dot5(17), dB9(18), dB9Dot5(19), dB10(20), dB10Dot5(21), dB11(22), dB11Dot5(23), dB12(24), dB12Dot5(25), dB13(26), dB13Dot5(27), dB14(28), dB14Dot5(29), dB15(30), dB15Dot5(31), dB16(32), dB16Dot5(33), dB17(34), dB17Dot5(35), dB18(36), dB18Dot5(37), dB19(38), dB19Dot5(39), dB20(40), dB20Dot5(41), dB21(42), dB21Dot5(43), dB22(44), dB22Dot5(45), dB23(46), dB23Dot5(47), dB24(48), dB24Dot5(49), dB25(50), dB25Dot5(51), dB26(52), dB26Dot5(53), dB27(54), dB27Dot5(55), dB28(56), dB28Dot5(57), dB29(58), dB29Dot5(59), dB30(60), dB30Dot5(61), dB31(62), dB31Dot5(63), dB32(64), dB32Dot5(65), dB33(66), dB33Dot5(67), dB34(68), dB34Dot5(69), dB35(70), dB35Dot5(71), dB36(72), dB36Dot5(73), dB37(74), dB37Dot5(75), dB38(76), dB38Dot5(77), dB39(78), dB39Dot5(79), dB40(80), dB40Dot5(81), dB41(82), dB41Dot5(83), dB42(84), dB42Dot5(85), dB43(86), dB43Dot5(87), dB44(88), dB44Dot5(89), dB45(90), dB45Dot5(91), dB46(92), dB46Dot5(93), dB47(94), dB47Dot5(95), dB48(96), dB48Dot5(97), dB49(98), dB49Dot5(99), dB50(100), dB50Dot5(101), dB51(102), dB51Dot5(103), dB52(104), dB52Dot5(105), dB53(106), dB53Dot5(107), dB54(108), dB54Dot5(109), dB55(110), dB55Dot5(111), dB56(112), dB56Dot5(113), dB57(114), dB57Dot5(115), dB58(116), dB58Dot5(117), dB59(118), dB59Dot5(119), dB60(120), dB60Dot5(121), dB61(122), dB61Dot5(123), dB62(124), dB62Dot5(125), dB63(126), dB63Dot5(127), dB64(128), dB64Dot5(129), dB65(130), dB65Dot5(131), dB66(132), dB66Dot5(133), dB67(134), dB67Dot5(135), dB68(136), dB68Dot5(137), dB69(138), dB69Dot5(139), dB70(140), dB70Dot5(141), dB71(142), dB71Dot5(143), dB72(144), dB72Dot5(145), dB73(146), dB73Dot5(147), dB74(148), dB74Dot5(149), dB75(150), dB75Dot5(151), dB76(152), dB76Dot5(153), dB77(154), dB77Dot5(155), dB78(156), dB78Dot5(157), dB79(158), dB79Dot5(159), dB80(160), dB80Dot5(161), dB81(162), dB81Dot5(163), dB82(164), dB82Dot5(165), dB83(166), dB83Dot5(167), dB84(168), dB84Dot5(169), dB85(170), dB85Dot5(171), dB86(172), dB86Dot5(173), dB87(174), dB87Dot5(175), dB88(176), dB88Dot5(177), dB89(178), dB89Dot5(179), dB90(180), dB90Dot5(181), dB91(182), dB91Dot5(183), dB92(184), dB92Dot5(185), dB93(186), dB93Dot5(187), dB94(188), dB94Dot5(189), dB95(190), dB95Dot5(191), dB96(192), dB96Dot5(193), dB97(194), dB97Dot5(195), dB98(196), dB98Dot5(197), dB99(198), dB99Dot5(199), dB100(200), dB100Dot5(201), dB101(202), dB101Dot5(203), dB102(204), dB102Dot5(205), dB103(206), dB103Dot5(207), dB104(208), dB104Dot5(209), dB105(210), dB105Dot5(211), dB106(212), dB106Dot5(213), dB107(214), dB107Dot5(215), dB108(216), dB108Dot5(217), dB109(218), dB109Dot5(219), dB110(220), dB110Dot5(221), dB111(222), dB111Dot5(223), dB112(224), dB112Dot5(225), dB113(226), dB113Dot5(227), dB114(228), dB114Dot5(229), dB115(230), dB115Dot5(231), dB116(232), dB116Dot5(233), dB117(234), dB117Dot5(235), dB118(236), dB118Dot5(237), dB119(238), dB119Dot5(239), dB120(240), dB120Dot5(241), dB121(242), dB121Dot5(243), dB122(244), dB122Dot5(245), dB123(246), dB123Dot5(247), dB124(248), dB124Dot5(249), dB125(250), dB125Dot5(251), dB126(252), dB126Dot5(253), dB127(254), dB127Dot5(255), attenuationNotApplicable(32766), attenuationInvalid(32767)    

Xldv20AdslMinMargin  
INTEGER dB-6(-6), dB-5(-5), dB-4(-4), dB-3(-3), dB-2(-2), dB-1(-1), dB0(0), dB1(1), dB2(2), dB3(3), dB4(4), dB5(5), dB6(6), dB7(7), dB8(8), dB9(9), dB10(10), dB11(11), dB12(12), auto(255)    

Xldv20AdslOutputPower  
INTEGER dBm-31(-31), dBm-30(-30), dBm-29(-29), dBm-28(-28), dBm-27(-27), dBm-26(-26), dBm-25(-25), dBm-24(-24), dBm-23(-23), dBm-22(-22), dBm-21(-21), dBm-20(-20), dBm-19(-19), dBm-18(-18), dBm-17(-17), dBm-16(-16), dBm-15(-15), dBm-14(-14), dBm-13(-13), dBm-12(-12), dBm-11(-11), dBm-10(-10), dBm-9(-9), dBm-8(-8), dBm-7(-7), dBm-6(-6), dBm-5(-5), dBm-4(-4), dBm-3(-3), dBm-2(-2), dBm-1(-1), dBm0(0), dBm1(1), dBm2(2), dBm3(3), dBm4(4), dBm5(5), dBm6(6), dBm7(7), dBm8(8), dBm9(9), dBm10(10), dBm11(11), dBm12(12), dBm13(13), dBm14(14), dBm15(15), dBm16(16), dBm17(17), dBm18(18), dBm19(19), dBm20(20), dBm21(21), dBm22(22), dBm23(23), dBm24(24), dBm25(25), dBm26(26), dBm27(27), dBm28(28), dBm29(29), dBm30(30), dBm31(31), dBm32(32), outputPowerInvalid(32767)    

Xldv20StartupResult  
INTEGER suFinished(1), suFailed(2), suStandaloneStartupFinished(3), suInProgress(4)    

Xldv20StartupType  
INTEGER warm(6300), cold(6301), reload(6302), cmuUpgrade(6303), powerUp(6304)    

Xldv20SnmLctSession  
INTEGER connected(1), disconnected(2), sessionCancelled(3), sessionTimeout(4), onuCutSession(5)    

Xldv20RepSource  
INTEGER hwm(1), tlm(2), vplNni(3), vplUni(4), extAlarm(5), vccTp(6), vpcTp(7), vclTp(9), vplTp(10), vclNni(11), vclUni(12), vplCC(13), vclCC(14)    

Xldv20PollingFlagType  
INTEGER flagSet(1), flagNotSet(2)    

Xldv20TerminalType  
INTEGER tmn(1), lct(2), unknown(10)    

Xldv20ChannelType  
INTEGER inband(1), outband(2), unknown(10)    

Xldv20XdslServiceType  
INTEGER gDotHsMode(1), ansiT1Dot413(2), gDotLiteMode(3), gDotAll(4)    

Xldv20XdslServiceTypeCurrent  
INTEGER gDotDmtMode(1), ansiT1Dot413(2), gDotLiteMode(3), serviceTypeUnknown(10)    

Xldv20LoopMode  
INTEGER forward(1), loopAndForward(2)    

Xldv20XdslInitStatus  
INTEGER ntNotPresent(1), communicationFailed(2), fastRetrainProfileError(3), rateParameterConfigurationError(4), serviceTypeAdrRequestRejected(5), serviceTypeAdcRequestRejected(6), configuredRatesOutOfRange(7), configuredMinMaxRelationInvalid(8), channelRatesExceedsSystemLimits(9), adaptationCombinationInvalid(10), configuredDualChannelInvalid(11), marginLessThanMinMargin(12), adrNotCapableOfDualLatency(13), reserved1(14), reserved2(15), trainingBlockedBySu(16), trainingBlockedByCi(17), ntNotPresentDetectedOnCi(18), gliteModeNotPossibleInPCM(19), alarmsDetected(20), initStatusUnknown(21), noInitError(255)    

Xldv20AdcTrainingMode  
INTEGER enableParallelTraining(1), avoidParallelTrainingOnCI(2), avoidParallelTrainingOnSU(3), combinedTraining(4)    

Xldv20SdslServiceType  
INTEGER diamondLaneFraming(1), clearChannelFraming(2), ituFraming(3)    

Xldv20AdslDataRateDown  
INTEGER kbps32Cps75(1), kbps64Cps150(2), kbps96Cps226(3), kbps128Cps301(4), kbps160Cps377(5), kbps192Cps452(6), kbps224Cps528(7), kbps256Cps603(8), kbps288Cps679(9), kbps320Cps754(10), kbps352Cps830(11), kbps384Cps905(12), kbps416Cps981(13), kbps448Cps1056(14), kbps480Cps1132(15), kbps512Cps1207(16), kbps544Cps1283(17), kbps576Cps1358(18), kbps608Cps1433(19), kbps640Cps1509(20), kbps672Cps1584(21), kbps704Cps1660(22), kbps736Cps1735(23), kbps768Cps1811(24), kbps800Cps1886(25), kbps832Cps1962(26), kbps864Cps2037(27), kbps896Cps2113(28), kbps928Cps2188(29), kbps960Cps2264(30), kbps992Cps2339(31), kbps1024Cps2415(32), kbps1056Cps2490(33), kbps1088Cps2566(34), kbps1120Cps2641(35), kbps1152Cps2716(36), kbps1184Cps2792(37), kbps1216Cps2867(38), kbps1248Cps2943(39), kbps1280Cps3018(40), kbps1312Cps3094(41), kbps1344Cps3169(42), kbps1376Cps3245(43), kbps1408Cps3320(44), kbps1440Cps3396(45), kbps1472Cps3471(46), kbps1504Cps3547(47), kbps1536Cps3622(48), kbps1568Cps3698(49), kbps1600Cps3773(50), kbps1632Cps3849(51), kbps1664Cps3924(52), kbps1696Cps4000(53), kbps1728Cps4075(54), kbps1760Cps4150(55), kbps1792Cps4226(56), kbps1824Cps4301(57), kbps1856Cps4377(58), kbps1888Cps4452(59), kbps1920Cps4528(60), kbps1952Cps4603(61), kbps1984Cps4679(62), kbps2016Cps4754(63), kbps2048Cps4830(64), kbps2080Cps4905(65), kbps2112Cps4981(66), kbps2144Cps5056(67), kbps2176Cps5132(68), kbps2208Cps5207(69), kbps2240Cps5283(70), kbps2272Cps5358(71), kbps2304Cps5433(72), kbps2336Cps5509(73), kbps2368Cps5584(74), kbps2400Cps5660(75), kbps2432Cps5735(76), kbps2464Cps5811(77), kbps2496Cps5886(78), kbps2528Cps5962(79), kbps2560Cps6037(80), kbps2592Cps6113(81), kbps2624Cps6188(82), kbps2656Cps6264(83), kbps2688Cps6339(84), kbps2720Cps6415(85), kbps2752Cps6490(86), kbps2784Cps6566(87), kbps2816Cps6641(88), kbps2848Cps6716(89), kbps2880Cps6792(90), kbps2912Cps6867(91), kbps2944Cps6943(92), kbps2976Cps7018(93), kbps3008Cps7094(94), kbps3040Cps7169(95), kbps3072Cps7245(96), kbps3104Cps7320(97), kbps3136Cps7396(98), kbps3168Cps7471(99), kbps3200Cps7547(100), kbps3232Cps7622(101), kbps3264Cps7698(102), kbps3296Cps7773(103), kbps3328Cps7849(104), kbps3360Cps7924(105), kbps3392Cps8000(106), kbps3424Cps8075(107), kbps3456Cps8150(108), kbps3488Cps8226(109), kbps3520Cps8301(110), kbps3552Cps8377(111), kbps3584Cps8452(112), kbps3616Cps8528(113), kbps3648Cps8603(114), kbps3680Cps8679(115), kbps3712Cps8754(116), kbps3744Cps8830(117), kbps3776Cps8905(118), kbps3808Cps8981(119), kbps3840Cps9056(120), kbps3872Cps9132(121), kbps3904Cps9207(122), kbps3936Cps9283(123), kbps3968Cps9358(124), kbps4000Cps9433(125), kbps4032Cps9509(126), kbps4064Cps9584(127), kbps4096Cps9660(128), kbps4128Cps9735(129), kbps4160Cps9811(130), kbps4192Cps9886(131), kbps4224Cps9962(132), kbps4256Cps10037(133), kbps4288Cps10113(134), kbps4320Cps10188(135), kbps4352Cps10264(136), kbps4384Cps10339(137), kbps4416Cps10415(138), kbps4448Cps10490(139), kbps4480Cps10566(140), kbps4512Cps10641(141), kbps4544Cps10716(142), kbps4576Cps10792(143), kbps4608Cps10867(144), kbps4640Cps10943(145), kbps4672Cps11018(146), kbps4704Cps11094(147), kbps4736Cps11169(148), kbps4768Cps11245(149), kbps4800Cps11320(150), kbps4832Cps11396(151), kbps4864Cps11471(152), kbps4896Cps11547(153), kbps4928Cps11622(154), kbps4960Cps11698(155), kbps4992Cps11773(156), kbps5024Cps11849(157), kbps5056Cps11924(158), kbps5088Cps12000(159), kbps5120Cps12075(160), kbps5152Cps12150(161), kbps5184Cps12226(162), kbps5216Cps12301(163), kbps5248Cps12377(164), kbps5280Cps12452(165), kbps5312Cps12528(166), kbps5344Cps12603(167), kbps5376Cps12679(168), kbps5408Cps12754(169), kbps5440Cps12830(170), kbps5472Cps12905(171), kbps5504Cps12981(172), kbps5536Cps13056(173), kbps5568Cps13132(174), kbps5600Cps13207(175), kbps5632Cps13283(176), kbps5664Cps13358(177), kbps5696Cps13433(178), kbps5728Cps13509(179), kbps5760Cps13584(180), kbps5792Cps13660(181), kbps5824Cps13735(182), kbps5856Cps13811(183), kbps5888Cps13886(184), kbps5920Cps13962(185), kbps5952Cps14037(186), kbps5984Cps14113(187), kbps6016Cps14188(188), kbps6048Cps14264(189), kbps6080Cps14339(190), kbps6112Cps14415(191), kbps6144Cps14490(192), kbps6176Cps14566(193), kbps6208Cps14641(194), kbps6240Cps14716(195), kbps6272Cps14792(196), kbps6304Cps14867(197), kbps6336Cps14943(198), kbps6368Cps15018(199), kbps6400Cps15094(200), kbps6432Cps15169(201), kbps6464Cps15245(202), kbps6496Cps15320(203), kbps6528Cps15396(204), kbps6560Cps15471(205), kbps6592Cps15547(206), kbps6624Cps15622(207), kbps6656Cps15698(208), kbps6688Cps15773(209), kbps6720Cps15849(210), kbps6752Cps15924(211), kbps6784Cps16000(212), kbps6816Cps16075(213), kbps6848Cps16150(214), kbps6880Cps16226(215), kbps6912Cps16301(216), kbps6944Cps16377(217), kbps6976Cps16452(218), kbps7008Cps16528(219), kbps7040Cps16603(220), kbps7072Cps16679(221), kbps7104Cps16754(222), kbps7136Cps16830(223), kbps7168Cps16905(224), kbps7200Cps16981(225), kbps7232Cps17056(226), kbps7264Cps17132(227), kbps7296Cps17207(228), kbps7328Cps17283(229), kbps7360Cps17358(230), kbps7392Cps17433(231), kbps7424Cps17509(232), kbps7456Cps17584(233), kbps7488Cps17660(234), kbps7520Cps17735(235), kbps7552Cps17811(236), kbps7584Cps17886(237), kbps7616Cps17962(238), kbps7648Cps18037(239), kbps7680Cps18113(240), kbps7712Cps18188(241), kbps7744Cps18264(242), kbps7776Cps18339(243), kbps7808Cps18415(244), kbps7840Cps18490(245), kbps7872Cps18566(246), kbps7904Cps18641(247), kbps7936Cps18716(248), kbps7968Cps18792(249), kbps8000Cps18867(250), kbps8032Cps18943(251), kbps8064Cps19018(252), kbps8096Cps19094(253)    

Xldv20AdslDataRateUp  
INTEGER kbps32Cps75(1), kbps64Cps150(2), kbps96Cps226(3), kbps128Cps301(4), kbps160Cps377(5), kbps192Cps452(6), kbps224Cps528(7), kbps256Cps603(8), kbps288Cps679(9), kbps320Cps754(10), kbps352Cps830(11), kbps384Cps905(12), kbps416Cps981(13), kbps448Cps1056(14), kbps480Cps1132(15), kbps512Cps1207(16), kbps544Cps1283(17), kbps576Cps1358(18), kbps608Cps1433(19), kbps640Cps1509(20), kbps672Cps1584(21), kbps704Cps1660(22), kbps736Cps1735(23), kbps768Cps1811(24)    

Xldv20AdslDataRateDownCurrent  
INTEGER kbps32Cps75(1), kbps64Cps150(2), kbps96Cps226(3), kbps128Cps301(4), kbps160Cps377(5), kbps192Cps452(6), kbps224Cps528(7), kbps256Cps603(8), kbps288Cps679(9), kbps320Cps754(10), kbps352Cps830(11), kbps384Cps905(12), kbps416Cps981(13), kbps448Cps1056(14), kbps480Cps1132(15), kbps512Cps1207(16), kbps544Cps1283(17), kbps576Cps1358(18), kbps608Cps1433(19), kbps640Cps1509(20), kbps672Cps1584(21), kbps704Cps1660(22), kbps736Cps1735(23), kbps768Cps1811(24), kbps800Cps1886(25), kbps832Cps1962(26), kbps864Cps2037(27), kbps896Cps2113(28), kbps928Cps2188(29), kbps960Cps2264(30), kbps992Cps2339(31), kbps1024Cps2415(32), kbps1056Cps2490(33), kbps1088Cps2566(34), kbps1120Cps2641(35), kbps1152Cps2716(36), kbps1184Cps2792(37), kbps1216Cps2867(38), kbps1248Cps2943(39), kbps1280Cps3018(40), kbps1312Cps3094(41), kbps1344Cps3169(42), kbps1376Cps3245(43), kbps1408Cps3320(44), kbps1440Cps3396(45), kbps1472Cps3471(46), kbps1504Cps3547(47), kbps1536Cps3622(48), kbps1568Cps3698(49), kbps1600Cps3773(50), kbps1632Cps3849(51), kbps1664Cps3924(52), kbps1696Cps4000(53), kbps1728Cps4075(54), kbps1760Cps4150(55), kbps1792Cps4226(56), kbps1824Cps4301(57), kbps1856Cps4377(58), kbps1888Cps4452(59), kbps1920Cps4528(60), kbps1952Cps4603(61), kbps1984Cps4679(62), kbps2016Cps4754(63), kbps2048Cps4830(64), kbps2080Cps4905(65), kbps2112Cps4981(66), kbps2144Cps5056(67), kbps2176Cps5132(68), kbps2208Cps5207(69), kbps2240Cps5283(70), kbps2272Cps5358(71), kbps2304Cps5433(72), kbps2336Cps5509(73), kbps2368Cps5584(74), kbps2400Cps5660(75), kbps2432Cps5735(76), kbps2464Cps5811(77), kbps2496Cps5886(78), kbps2528Cps5962(79), kbps2560Cps6037(80), kbps2592Cps6113(81), kbps2624Cps6188(82), kbps2656Cps6264(83), kbps2688Cps6339(84), kbps2720Cps6415(85), kbps2752Cps6490(86), kbps2784Cps6566(87), kbps2816Cps6641(88), kbps2848Cps6716(89), kbps2880Cps6792(90), kbps2912Cps6867(91), kbps2944Cps6943(92), kbps2976Cps7018(93), kbps3008Cps7094(94), kbps3040Cps7169(95), kbps3072Cps7245(96), kbps3104Cps7320(97), kbps3136Cps7396(98), kbps3168Cps7471(99), kbps3200Cps7547(100), kbps3232Cps7622(101), kbps3264Cps7698(102), kbps3296Cps7773(103), kbps3328Cps7849(104), kbps3360Cps7924(105), kbps3392Cps8000(106), kbps3424Cps8075(107), kbps3456Cps8150(108), kbps3488Cps8226(109), kbps3520Cps8301(110), kbps3552Cps8377(111), kbps3584Cps8452(112), kbps3616Cps8528(113), kbps3648Cps8603(114), kbps3680Cps8679(115), kbps3712Cps8754(116), kbps3744Cps8830(117), kbps3776Cps8905(118), kbps3808Cps8981(119), kbps3840Cps9056(120), kbps3872Cps9132(121), kbps3904Cps9207(122), kbps3936Cps9283(123), kbps3968Cps9358(124), kbps4000Cps9433(125), kbps4032Cps9509(126), kbps4064Cps9584(127), kbps4096Cps9660(128), kbps4128Cps9735(129), kbps4160Cps9811(130), kbps4192Cps9886(131), kbps4224Cps9962(132), kbps4256Cps10037(133), kbps4288Cps10113(134), kbps4320Cps10188(135), kbps4352Cps10264(136), kbps4384Cps10339(137), kbps4416Cps10415(138), kbps4448Cps10490(139), kbps4480Cps10566(140), kbps4512Cps10641(141), kbps4544Cps10716(142), kbps4576Cps10792(143), kbps4608Cps10867(144), kbps4640Cps10943(145), kbps4672Cps11018(146), kbps4704Cps11094(147), kbps4736Cps11169(148), kbps4768Cps11245(149), kbps4800Cps11320(150), kbps4832Cps11396(151), kbps4864Cps11471(152), kbps4896Cps11547(153), kbps4928Cps11622(154), kbps4960Cps11698(155), kbps4992Cps11773(156), kbps5024Cps11849(157), kbps5056Cps11924(158), kbps5088Cps12000(159), kbps5120Cps12075(160), kbps5152Cps12150(161), kbps5184Cps12226(162), kbps5216Cps12301(163), kbps5248Cps12377(164), kbps5280Cps12452(165), kbps5312Cps12528(166), kbps5344Cps12603(167), kbps5376Cps12679(168), kbps5408Cps12754(169), kbps5440Cps12830(170), kbps5472Cps12905(171), kbps5504Cps12981(172), kbps5536Cps13056(173), kbps5568Cps13132(174), kbps5600Cps13207(175), kbps5632Cps13283(176), kbps5664Cps13358(177), kbps5696Cps13433(178), kbps5728Cps13509(179), kbps5760Cps13584(180), kbps5792Cps13660(181), kbps5824Cps13735(182), kbps5856Cps13811(183), kbps5888Cps13886(184), kbps5920Cps13962(185), kbps5952Cps14037(186), kbps5984Cps14113(187), kbps6016Cps14188(188), kbps6048Cps14264(189), kbps6080Cps14339(190), kbps6112Cps14415(191), kbps6144Cps14490(192), kbps6176Cps14566(193), kbps6208Cps14641(194), kbps6240Cps14716(195), kbps6272Cps14792(196), kbps6304Cps14867(197), kbps6336Cps14943(198), kbps6368Cps15018(199), kbps6400Cps15094(200), kbps6432Cps15169(201), kbps6464Cps15245(202), kbps6496Cps15320(203), kbps6528Cps15396(204), kbps6560Cps15471(205), kbps6592Cps15547(206), kbps6624Cps15622(207), kbps6656Cps15698(208), kbps6688Cps15773(209), kbps6720Cps15849(210), kbps6752Cps15924(211), kbps6784Cps16000(212), kbps6816Cps16075(213), kbps6848Cps16150(214), kbps6880Cps16226(215), kbps6912Cps16301(216), kbps6944Cps16377(217), kbps6976Cps16452(218), kbps7008Cps16528(219), kbps7040Cps16603(220), kbps7072Cps16679(221), kbps7104Cps16754(222), kbps7136Cps16830(223), kbps7168Cps16905(224), kbps7200Cps16981(225), kbps7232Cps17056(226), kbps7264Cps17132(227), kbps7296Cps17207(228), kbps7328Cps17283(229), kbps7360Cps17358(230), kbps7392Cps17433(231), kbps7424Cps17509(232), kbps7456Cps17584(233), kbps7488Cps17660(234), kbps7520Cps17735(235), kbps7552Cps17811(236), kbps7584Cps17886(237), kbps7616Cps17962(238), kbps7648Cps18037(239), kbps7680Cps18113(240), kbps7712Cps18188(241), kbps7744Cps18264(242), kbps7776Cps18339(243), kbps7808Cps18415(244), kbps7840Cps18490(245), kbps7872Cps18566(246), kbps7904Cps18641(247), kbps7936Cps18716(248), kbps7968Cps18792(249), kbps8000Cps18867(250), kbps8032Cps18943(251), kbps8064Cps19018(252), kbps8096Cps19094(253), rateInvalid(32767)    

Xldv20AdslDataRateUpCurrent  
INTEGER kbps32Cps75(1), kbps64Cps150(2), kbps96Cps226(3), kbps128Cps301(4), kbps160Cps377(5), kbps192Cps452(6), kbps224Cps528(7), kbps256Cps603(8), kbps288Cps679(9), kbps320Cps754(10), kbps352Cps830(11), kbps384Cps905(12), kbps416Cps981(13), kbps448Cps1056(14), kbps480Cps1132(15), kbps512Cps1207(16), kbps544Cps1283(17), kbps576Cps1358(18), kbps608Cps1433(19), kbps640Cps1509(20), kbps672Cps1584(21), kbps704Cps1660(22), kbps736Cps1735(23), kbps768Cps1811(24), rateInvalid(32767)    

Xldv20SdslDataRate  
INTEGER kbps160Cps377(5), kbps192Cps452(6), kbps208Cps490(7), kbps256Cps603(8), kbps288Cps679(9), kbps320Cps754(10), kbps352Cps830(11), kbps384Cps905(12), kbps400Cps943(13), kbps768Cps1811(24), kbps784Cps1849(25), kbps1152Cps2716(36), kbps1168Cps2754(37), kbps1536Cps3622(48), kbps1552Cps3660(49), kbps1744Cps4113(54), kbps2320Cps5471(72)    

Xldv20SdslDataRateCurrent  
INTEGER kbps160Cps377(5), kbps192Cps452(6), kbps208Cps490(7), kbps256Cps603(8), kbps288Cps679(9), kbps320Cps754(10), kbps352Cps830(11), kbps384Cps905(12), kbps400Cps943(13), kbps768Cps1811(24), kbps784Cps1849(25), kbps1152Cps2716(36), kbps1168Cps2754(37), kbps1536Cps3622(48), kbps1552Cps3660(49), kbps1744Cps4113(54), kbps2320Cps5471(72), rateInvalid(32767)    

Xldv20ControlReq  
INTEGER noRequest(1), commExecStarted(5), paramFaulty(11), requestBusy(12), setDataFailed(13), aswTimeout(14), commandFailed(15), commandSucceeded(16), snmUpdateSnmpConfigFile(1000), snmUpdateComplete(1051), snmUpdateFailed(1052), snmFtpError(1053), snmUpFtpIpAddrFailed(1054), snmUpFtpAccountFailed(1055), snmUpFtpPasswdFailed(1056), snmUpFtpDescPathFailed(1057), createVplCC(2001), deleteVplCC(2002), createEthVplCC(2003), deleteEthVplCC(2004), createVpcTp(2005), deleteVpcTp(2006), createEthVpcTp(2007), deleteEthVpcTp(2008), createVclCC(2009), deleteVclCC(2010), createEthVclCC(2011), deleteEthVclCC(2012), modifyNumberOfVcs(2013), actVpiNniFaulty(2100), actVpiUniFaulty(2101), actPortLocationIdFaulty(2102), actControlReqFaulty(2103), actPeakCellRateUpstreamFaulty(2106), actPeakCellRateDownstreamFaulty(2107), actCellDelayVariationUpstreamFaulty(2108), actCellDelayVariationDownstreamFaulty(2109), actTrafficTypeFaulty(2110), actSCRUpstreamFaulty(2114), actSCRDownstreamFaulty(2115), actMBSUpstreamFaulty(2116), actMBSDownstreamFaulty(2117), actVpcTpNotExisting(2118), actTrafficDirectionFaulty(2119), actVciNniFaulty(2120), actVciUniFaulty(2121), actLineBlocked(2122), actVpcTpExists(2123), actWrongLiType(2132), actSegmentEndPointUniFaulty(2133), actSegmentEndPointNniFaulty(2134), actVclCCExists(2135), actNumberOfVcsFaulty(2136), actVbrCDVTUpstreamFaulty(2137), actVbrCDVTDownstreamFaulty(2138), actMaxCcsPerPortExceeded(2140), actMaxNumberOfVcsToSmall(2141), actSegmentEndPointNtFaulty(2142), actMaxNrOfCcsInDbExceeded(2143), actMaxNrOfCcsOnHwExceeded(2144), lineNotEnabled(2150), ccExists(2151), vpiUniNotExisting(2152), vciTrafficTypeInvalid(2153), configEth(2200), configEthFailed(2251), ethModeInvalid(2252), ethVpiUniNotExisting(2253), ethVciUniNotExisting(2254), ethVciTrafficTypeFaulty(2255), ethVciPeakCellRateUpstreamFaulty(2256), actEthVpcTpDeletionNotAllowed(2257), continuityCheckRequest(2300), continuityCheckAlreadyEnabled(2351), continuityCheckAlreadyDisabled(2352), continuityCheckReject(2353), continuityCheckTestTypeConflict(2354), continuityCheckNotSupportedOnNt(2355), continuityCheckTrafficDirectionConflict(2356), configInbandTmn(2400), configInbandTmnFailed(2451), inbandVpiExists(2452), inbandVciExists(2453), cacBwOverflowUp(2551), cacBwOverflowDown(2552), cacLineBlockedByTlm(2553), cacTrafficTypeConflict(2554), cacTrafficDirectionConflict(2555), cacMbsOverflowUp(2556), cacMbsOverflowDown(2557), cacBwWarningUp(2558), cacBwWarningDown(2559), cacMbsWarningUp(2560), cacMbsWarningDown(2561), cacMbsScrError(2562), cacInternalError(2563), createHwUnit(3000), deleteHwUnit(3001), changeHwUnitForced(3002), hwuParamFaulty(3100), hwuCommandFailed(3101), hwuObjExists(3102), hwuEquTypeNotAvail(3103), hwuEqhTypeNotAvail(3104), hwuPiuTypeNotAvail(3105), hwuPiuTypeNotAccepted(3106), hwuContainingUnitNotAvail(3107), hwuObjNotAvail(3108), hwuObjNotEmpty(3109), hwuObjNotLocked(3110), hwuObjNotValid(3111), hwuOk(3112), hwuCreateHwUnitComplete(3113), hwuCcExisting(3114), hwuForcedChangeNotAllowed(3115), hwuUpgradeRunning(3116), riSingleBoard(4000), riAllData(4001), activateData(5000), resourceProblem(5150), vpProblem(5151), resourceProblemUpstream(5152), resourceProblemDownstream(5153), vpProblemUpstream(5154), vpProblemDownstream(5155), bandwidthUpstreamWarning(5156), bandwidthDownstreamWarning(5157), mbsUpstreamWarning(5158), mbsDownstreamWarning(5119), wrongAdminState(5161), wrongXdslServiceType(5162), loopDiagRequest(5500), loopTestRequest(5600), loopTestReject(5901), loopTestBusy(5902), updateAlmList(6000), updateFiltList(6211), startSendingAlarms(6213), noCurrentAlarms(6214), warm(6300), cold(6301), reload(6302), dbReload(6303), rjUpgRunning(6353), rjRstRunning(6354), rjPiuNotAvail(6355), rjResetNotSupported(6356), rstRequestFailed(6980), dbuReadRequest(7000), dbuReadComplete(7081), dbuReadFailed(7082), dbuFileCreationFailed(7083), dbuFileTransmissionFailed(7084), sucUpgrStartRequest(8000), sucActivateLoad(8001), sucReadSAPSContentFile(8003), sucGetSwVersions(8004), sucUpgrEndRequest(8006), sucUpgrTaskCreationFault(8050), sucUpgrDbAccessFault(8051), sucGetSwVersionsFailed(8052), sucUpgrMissParameter(8053), sucAlreadyLoaded(8054), sucOk(8320), sucNotOk(8321), sucDbAccessFailed(8322), sucPiuUnlocked(8323), sucTransmissionError(8324), sucWrongSwVersion(8325), sucUnitTypeMismatch(8326), sucFtpTransError(8327), sucFtpCrcError(8328), sucSwHwMismatch(8329), sucUpgrWrongAvState(8330), sucFepromCopyFault(8331), sucUpdateDescFileFailed(8332), sucFtpServerNoteAvailable(8333), sucFtpSendError(8334), sucDbBackupFault(8335), sucUpgradeComplete(8336), sucUpgradeNotComplete(8337), sutInitialized(8400), sutToDo(8401), sutStarted(8402), sutCrashed(8404), sutFtpDone(8408), sutDone(8416), sutReadyForReset(8432), sutObsolete(8464), backupDb(9000), localBackupOk(9050), remoteBackupOk(9051), localBackupFailed(9052), remoteBackupFailed(9053), flashAccessFailed(9054), dbReadFailed(9055), dbmLocalBackupOk(9100), dbmRemoteBackupOk(9101), dbmLocalBackupFailed(9102), dbmRemoteBackupFailed(9103), dbmFlashAccessFailed(9104), dbmDbReadFailed(9105), dbmLocalBackupFileFaulty(9106), dbmRemoteBackupFileFaulty(9107), dbmRestoreFailed(9108), dbmRestoreOk(9109), imaSetMinNumTxLinks(9200), imaBwError(9201), imaSetMinNumOk(9202), imaSetMinNumFailed(9203)    

Xldv20TmnEntry  
SEQUENCE    
  xldv20TmnIndex INTEGER
  xldv20TmnOrLctTerminal Xldv20TerminalType
  xldv20TmnInOrOutBand Xldv20ChannelType
  xldv20TmnConnected INTEGER
  xldv20TmnTrapFlowControl Xldv20SuppressionType
  xldv20TmnLctSessionPollingFlag Xldv20PollingFlagType

Xldv20AtmCrossConnectEntry  
SEQUENCE    
  xldv20AccOperationalState Xldv20OperState
  xldv20AccTerminationPointA INTEGER
  xldv20AccTerminationPointZ INTEGER
  xldv20AccLineIndex Unsigned16
  xldv20AccEthVpcIndex INTEGER
  xldv20AccEthVccIndex INTEGER
  xldv20AccVpiNniIndex INTEGER
  xldv20AccAlarmState Xldv20CallpAlarmState
  xldv20AccAdminState Xldv20AdminState
  xldv20AccAtmfVplIndex INTEGER

Xldv20VplTpEntry  
SEQUENCE    
  xldv20VplOperationalState Xldv20OperState
  xldv20VplVpiValue INTEGER
  xldv20VplHwUnitIndex Unsigned16
  xldv20VplIfIndex Unsigned16
  xldv20VplPeakCellRateUpstream Unsigned32
  xldv20VplPeakCellRateDownstream Unsigned32
  xldv20VplCellDelayVariationToleranceUpstream INTEGER
  xldv20VplCellDelayVariationToleranceDownstream INTEGER
  xldv20VplTrafficType Xldv20TrafficType
  xldv20VplTrafficDirection Xldv20TrafficDirection
  xldv20VplConnectivityPointer Unsigned16
  xldv20VplLineIndex Unsigned16
  xldv20VplSegmentEndPoint INTEGER
  xldv20VplSustainableCellRateUpstream Unsigned32
  xldv20VplSustainableCellRateDownstream Unsigned32
  xldv20VplMaximumBurstSizeUpstream INTEGER
  xldv20VplMaximumBurstSizeDownstream INTEGER
  xldv20VplAlarmSeverityIndex Xldv20AlmSevProfileIndex
  xldv20VplAlarmFilteringIndex Xldv20AlmFiltProfileIndex
  xldv20VplCvpIndexSegment INTEGER
  xldv20VplIndex INTEGER
  xldv20VplLOCAlarm Xldv20TpAlarmState
  xldv20VplVbrCDVTUpstream INTEGER
  xldv20VplVbrCDVTDownstream INTEGER

Xldv20VpcTpEntry  
SEQUENCE    
  xldv20VpcOperationalState Xldv20OperState
  xldv20VpcVpiValue INTEGER
  xldv20VpcHwUnitIndex Unsigned16
  xldv20VpcIfIndex Unsigned16
  xldv20VpcPeakCellRateUpstream Unsigned32
  xldv20VpcPeakCellRateDownstream Unsigned32
  xldv20VpcCellDelayVariationToleranceUpstream INTEGER
  xldv20VpcCellDelayVariationToleranceDownstream INTEGER
  xldv20VpcTrafficType Xldv20TrafficType
  xldv20VpcTrafficDirection Xldv20TrafficDirection
  xldv20VpcLineIndex Unsigned16
  xldv20VpcSegmentEndPoint INTEGER
  xldv20VpcSustainableCellRateUpstream Unsigned32
  xldv20VpcSustainableCellRateDownstream Unsigned32
  xldv20VpcMaximumBurstSizeUpstream INTEGER
  xldv20VpcMaximumBurstSizeDownstream INTEGER
  xldv20VpcAlarmSeverityIndex Xldv20AlmSevProfileIndex
  xldv20VpcAlarmFilteringIndex Xldv20AlmFiltProfileIndex
  xldv20VpcCvpIndexSegment INTEGER
  xldv20VpcCvpIndexEndToEnd INTEGER
  xldv20VpcIndex INTEGER
  xldv20VpcAISAlarm Xldv20TpAlarmState
  xldv20VpcRDIAlarm Xldv20TpAlarmState
  xldv20VpcLOCAlarm Xldv20TpAlarmState
  xldv20VpcNumberOfVcs INTEGER
  xldv20VpcVbrCDVTUpstream INTEGER
  xldv20VpcVbrCDVTDownstream INTEGER
  xldv20VpcEmSpecific Unsigned16
  xldv20VpcEthVpcIndex INTEGER
  xldv20VpcAtmfVplIndex INTEGER

Xldv20VccTpEntry  
SEQUENCE    
  xldv20VccOperationalState Xldv20OperState
  xldv20VccVciValue INTEGER
  xldv20VccVpcIndex INTEGER
  xldv20VccHwUnitIndex Unsigned16
  xldv20VccAlarmSeverityIndex Xldv20AlmSevProfileIndex
  xldv20VccAlarmFilteringIndex Xldv20AlmFiltProfileIndex
  xldv20VccLineIndex Unsigned16
  xldv20VccIndex INTEGER
  xldv20VccAISAlarm Xldv20TpAlarmState
  xldv20VccRDIAlarm Xldv20TpAlarmState
  xldv20VccLOCAlarm Xldv20TpAlarmState
  xldv20VccCvcIndexSegment Unsigned16
  xldv20VccCvcIndexEndToEnd Unsigned16

Xldv20VcCrossConnectEntry  
SEQUENCE    
  xldv20VcxOperationalState Xldv20OperState
  xldv20VcxTerminationPointA INTEGER
  xldv20VcxTerminationPointZ INTEGER
  xldv20VcxLineIndex Unsigned16
  xldv20VcxEthVpcIndex INTEGER
  xldv20VcxEthVccIndex INTEGER
  xldv20VcxVpcNniIndex Unsigned16
  xldv20VcxVpcUniIndex Unsigned16
  xldv20VcxIndex INTEGER
  xldv20VcxAlarmState Xldv20CallpAlarmState
  xldv20VcxAdminState Xldv20AdminState
  xldv20VcxAtmfVplIndex INTEGER

Xldv20VclTpEntry  
SEQUENCE    
  xldv20VclOperationalState Xldv20OperState
  xldv20VclVpiValue INTEGER
  xldv20VclVciValue INTEGER
  xldv20VclHwUnitIndex Unsigned16
  xldv20VclIfIndex Unsigned16
  xldv20VclPeakCellRateUpstream Unsigned32
  xldv20VclPeakCellRateDownstream Unsigned32
  xldv20VclCellDelayVariationToleranceUpstream INTEGER
  xldv20VclCellDelayVariationToleranceDownstream INTEGER
  xldv20VclTrafficType Xldv20TrafficType
  xldv20VclTrafficDirection Xldv20TrafficDirection
  xldv20VclConnectivityPointer Unsigned16
  xldv20VclLineIndex Unsigned16
  xldv20VclSegmentEndPoint INTEGER
  xldv20VclSustainableCellRateUpstream Unsigned32
  xldv20VclSustainableCellRateDownstream Unsigned32
  xldv20VclMaximumBurstSizeUpstream INTEGER
  xldv20VclMaximumBurstSizeDownstream INTEGER
  xldv20VclAlarmSeverityIndex Xldv20AlmSevProfileIndex
  xldv20VclAlarmFilteringIndex Xldv20AlmFiltProfileIndex
  xldv20VclCvcIndexSegment Unsigned16
  xldv20VclIndex INTEGER
  xldv20VclLOCAlarm Xldv20TpAlarmState
  xldv20VclVpcIndex INTEGER
  xldv20VclVbrCDVTUpstream INTEGER
  xldv20VclVbrCDVTDownstream INTEGER

Xldv20EthernetConfigEntry  
SEQUENCE    
  xldv20EthMode Xldv20EthNtMode
  xldv20EthE164Isp OCTET STRING
  xldv20EthIpAddressNt IpAddress
  xldv20EthIpAddressSubnetMaskNt IpAddress
  xldv20EthIpAddressCo IpAddress
  xldv20EthIpAddressSubnetMaskCo IpAddress
  xldv20EthIpAddressRemoteRouter IpAddress

Xldv20ContinuityCheckVpEntry  
SEQUENCE    
  xldv20CvpIndex Unsigned16
  xldv20CvpEndpointType Xldv20EndpointType
  xldv20CvpTestType Xldv20TestType
  xldv20CvpOperationalState Xldv20OperState
  xldv20CvpVpTpIndex INTEGER
  xldv20CvpObjectType Xldv20RepSource

Xldv20ContinuityCheckVcEntry  
SEQUENCE    
  xldv20CvcIndex Unsigned16
  xldv20CvcEndpointType Xldv20EndpointType
  xldv20CvcTestType Xldv20TestType
  xldv20CvcOperationalState Xldv20OperState
  xldv20CvcVcTpIndex INTEGER
  xldv20CvcObjectType Xldv20RepSource

Xldv20HwUnitEntry  
SEQUENCE    
  xldv20HwUnitIndex Unsigned16
  xldv20HwUnitType Xldv20HwUnitType

Xldv20HwContainmentEntry  
SEQUENCE    
  xldv20HwContainingUnitIndex Unsigned16
  xldv20HwContainedUnitAddr INTEGER
  xldv20HwContainedUnitIndex Unsigned16

Xldv20HwEquipEntry  
SEQUENCE    
  xldv20EquType DisplayString
  xldv20EquLocation OCTET STRING
  xldv20EquUserLabel OCTET STRING
  xldv20EquConnectedPiuIndex Unsigned16
  xldv20EquConnectedPiuPort INTEGER

Xldv20HwEquipHolderEntry  
SEQUENCE    
  xldv20EqhType Xldv20EqhType
  xldv20EqhAccPiuTypes DisplayString
  xldv20EqhSlotStatus Xldv20SlotStatus
  xldv20EqhSwVersion OCTET STRING
  xldv20EqhMnemoCode OCTET STRING
  xldv20EqhFwCode OCTET STRING
  xldv20EqhRiMnemoCode DisplayString
  xldv20EqhRiFwItemNumber DisplayString
  xldv20EqhRiFwIssue DisplayString
  xldv20EqhRiHwItemNumber DisplayString
  xldv20EqhRiHwIssue DisplayString
  xldv20EqhRiSerialNumber DisplayString

Xldv20HwPlugInUnitEntry  
SEQUENCE    
  xldv20PiuAdminState Xldv20AdminState
  xldv20PiuAvailStatus Xldv20AvailStatus
  xldv20PiuOperState Xldv20OperState
  xldv20PiuType DisplayString
  xldv20PiuAlarmSeverityIndex Xldv20AlmSevProfileIndex
  xldv20PiuAlarmFilteringIndex Xldv20AlmFiltProfileIndex
  xldv20PiuUpgradeResult Xldv20ControlReq

Xldv20HwUnitMappingEntry  
SEQUENCE    
  xldv20HwmHwUnitIndex Unsigned16
  xldv20HwmIfIndex Unsigned16

Xldv20IfEntry  
SEQUENCE    
  xldv20IfIndex Unsigned16
  xldv20IfType Xldv20IfType
  xldv20IfLineIndex Unsigned16
  xldv20IfHwUnitIndex Unsigned16
  xldv20IfHwPortId INTEGER
  xldv20IfConnectivityIndex Unsigned16
  xldv20IfOperState Xldv20OperState
  xldv20IfAdminState Xldv20AdminState
  xldv20IfAlarmState Xldv20AlarmState
  xldv20IfAlarmSeverityIndex Xldv20AlmSevProfileIndex
  xldv20IfAlarmFilteringIndex Xldv20AlmFiltProfileIndex

Xldv20AdcPPTPEntry  
SEQUENCE    
  xldv20AdcMinRateDnCfg Xldv20AdslDataRateDown
  xldv20AdcMinRateUpCfg Xldv20AdslDataRateUp
  xldv20AdcMaxRateDnCfg Xldv20AdslDataRateDown
  xldv20AdcMaxRateUpCfg Xldv20AdslDataRateUp
  xldv20AdcMarginDnCfg INTEGER
  xldv20AdcMarginUpCfg INTEGER
  xldv20AdcMinMarginDnCfg Xldv20AdslMinMargin
  xldv20AdcMinMarginUpCfg Xldv20AdslMinMargin
  xldv20AdcLatencyDnCfg Xldv20Latency
  xldv20AdcLatencyUpCfg Xldv20Latency
  xldv20AdcRateDn Xldv20AdslDataRateDownCurrent
  xldv20AdcRateUp Xldv20AdslDataRateUpCurrent
  xldv20AdcMarginDn Xldv20AdslMargin
  xldv20AdcMarginUp Xldv20AdslMargin
  xldv20AdcAttenuationDn Xldv20AdslAttenuation
  xldv20AdcAttenuationUp Xldv20AdslAttenuation
  xldv20AdcLinkState Xldv20LinkState
  xldv20AdcAISOnLOS Xldv20OperState
  xldv20AdcAISOnACT Xldv20OperState
  xldv20AdcGuaranteedBandwidthUsage INTEGER
  xldv20AdcXdslServiceTypeCfg Xldv20XdslServiceType
  xldv20AdcInitStatus Xldv20XdslInitStatus
  xldv20AdcTransceiverOutputPower Xldv20AdslOutputPower
  xldv20AdcFirstUsedSubCarrierUpstream INTEGER
  xldv20AdcFirstUsedSubCarrierDownstream INTEGER
  xldv20AdcLastUsedSubCarrierUpstream INTEGER
  xldv20AdcLastUsedSubCarrierDownstream INTEGER
  xldv20AdcXdslServiceType Xldv20XdslServiceTypeCurrent

Xldv20VdcPPTPEntry  
SEQUENCE    
  xldv20VdcMinRateDnCfg Xldv20VdcRateDn
  xldv20VdcMinRateUpCfg Xldv20VdcRateUp
  xldv20VdcMaxRateDnCfg Xldv20VdcRateDn
  xldv20VdcMaxRateUpCfg Xldv20VdcRateUp
  xldv20VdcLatencyDnCfg Xldv20VdcLatencyDn
  xldv20VdcLatencyUpCfg Xldv20VdcLatencyUp
  xldv20VdcPowerBoostCfg Xldv20VdcPowerBoostAdaptationType
  xldv20VdcWarmStartCfg Xldv20OperState
  xldv20VdcVdslModeCfg Xldv20VdcVdslMode
  xldv20VdcSleepModeCfg Xldv20OperState
  xldv20VdcPsdMaskCfg Xldv20VdcPsdMask
  xldv20VdcPowerAdaptationCfg Xldv20VdcPowerBoostAdaptationType
  xldv20VdcRateDn Xldv20VdcRateDn
  xldv20VdcRateUp Xldv20VdcRateUp
  xldv20VdcMarginDn Integer32
  xldv20VdcMarginUp Integer32
  xldv20VdcAttenuationDn Integer32
  xldv20VdcAttenuationUp Integer32
  xldv20VdcLinkState Xldv20LinkState
  xldv20VdcGuaranteedBandwidthUsage INTEGER

Xldv20IbmPPTPEntry  
SEQUENCE    
  xldv20IbmAISOnLOS Xldv20OperState
  xldv20IbmVpAISFiltering Xldv20OperState

Xldv20Ds3NePPTPEntry  
SEQUENCE    
  xldv20D3nType Xldv20LineType
  xldv20D3nCodingType Xldv20CodingType
  xldv20D3nPayloadScramblingActivate Xldv20OperState
  xldv20D3nEmptyCellType Xldv20EmptyCellType
  xldv20D3nBandwidthUsage INTEGER

Xldv20E3NePPTPEntry  
SEQUENCE    
  xldv20E3nType Xldv20LineType
  xldv20E3nCodingType Xldv20CodingType
  xldv20E3nTrailTraceSend OCTET STRING
  xldv20E3nTrailTraceSendDefault Xldv20OperState
  xldv20E3nTrailTraceExpect OCTET STRING
  xldv20E3nTrailTraceTIMDetectionActivate Xldv20OperState
  xldv20E3nTrailTraceReceive OCTET STRING
  xldv20E3nEmptyCellType Xldv20EmptyCellType
  xldv20E3nPayloadType Xldv20E3nPayloadType
  xldv20E3nBandwidthUsage INTEGER

Xldv20Stm1NePPTPEntry  
SEQUENCE    
  xldv20S1nLineType Xldv20LineType
  xldv20S1nPathTraceSend OCTET STRING
  xldv20S1nPathTraceSendDefault Xldv20OperState
  xldv20S1nPathTraceExpect OCTET STRING
  xldv20S1nPathTraceTIMDetectionActivate Xldv20OperState
  xldv20S1nPathTraceReceive OCTET STRING
  xldv20S1nHpEberThreshold Xldv20S1nS3nEberThreshold
  xldv20S1nMsEberThreshold Xldv20S1nS3nEberThreshold
  xldv20S1nRsEberThreshold Xldv20S1nS3nEberThreshold
  xldv20S1nSDThreshold Xldv20S1nS3nSDThreshold
  xldv20S1nRDIAISOnEber Xldv20OperState
  xldv20S1nSignalLabelReceive Integer32
  xldv20S1nEmptyCellType Xldv20EmptyCellType
  xldv20S1nBandwidthUsage INTEGER

Xldv20Sts3NePPTPEntry  
SEQUENCE    
  xldv20S3nLineType Xldv20LineType
  xldv20S3nPathTraceSend OCTET STRING Size(0..16)
  xldv20S3nPathTraceSendDefault Xldv20OperState
  xldv20S3nPathTraceExpect OCTET STRING Size(0..16)
  xldv20S3nPathTraceTIMDetectionActivate Xldv20OperState
  xldv20S3nPathTraceReceive OCTET STRING Size(0..16)
  xldv20S3nPathTraceSync Xldv20OperState
  xldv20S3nPathTraceSendCRCActivate Xldv20OperState
  xldv20S3nPathTraceReceiveCRCActivate Xldv20OperState
  xldv20S3nHpEberThreshold Xldv20S1nS3nEberThreshold
  xldv20S3nMsEberThreshold Xldv20S1nS3nEberThreshold
  xldv20S3nRsEberThreshold Xldv20S1nS3nEberThreshold
  xldv20S3nSDThreshold Xldv20S1nS3nSDThreshold
  xldv20S3nSignalLabelReceive Integer32
  xldv20S3nEmptyCellType Xldv20EmptyCellType
  xldv20S3nBandwidthUsage INTEGER

Xldv20Dsx1ConfigEntry  
SEQUENCE    
  xldv20Dsx1LineType INTEGER
  xldv20Dsx1LineCoding INTEGER
  xldv20Dsx1LoopbackConfig INTEGER
  xldv20Dsx1SignalMode INTEGER
  xldv20Dsx1TransmitClockSource INTEGER
  xldv20Dsx1Fdl INTEGER

Xldv20SdcPPTPEntry  
SEQUENCE    
  xldv20SdcRateCfg Xldv20SdslDataRate
  xldv20SdcXdslServiceTypeCfg Xldv20SdslServiceType
  xldv20SdcRate Xldv20SdslDataRateCurrent
  xldv20SdcMarginDn Xldv20AdslMargin
  xldv20SdcMarginUp Xldv20AdslMargin
  xldv20SdcAttenuationDn Xldv20AdslAttenuation
  xldv20SdcAttenuationUp Xldv20AdslAttenuation
  xldv20SdcLinkState Xldv20LinkState
  xldv20SdcAISOnLOS Xldv20OperState
  xldv20SdcAISOnACT Xldv20OperState
  xldv20SdcGuaranteedBandwidthUsage INTEGER
  xldv20SdcInitStatus Xldv20XdslInitStatus
  xldv20SdcMinMarginUpCfg INTEGER
  xldv20SdcTransceiverOutputPower Xldv20AdslOutputPower
  xldv20SdcXdslServiceType Xldv20XdslServiceTypeCurrent

Xldv20ImaGroupEntry  
SEQUENCE    
  xldv20ImaGroupIndex INTEGER 1..2147483647
  xldv20ImaGroupRowStatus Xldv20RowStatus
  xldv20ImaGroupIfIndex Unsigned16
  xldv20ImaGroupNeState Xldv20ImaGroupState
  xldv20ImaGroupFeState Xldv20ImaGroupState
  xldv20ImaGroupFailureStatus Xldv20ImaGroupFailureStatus
  xldv20ImaGroupSymmetry Xldv20ImaGroupSymmetry
  xldv20ImaGroupMinNumTxLinks INTEGER 1..8
  xldv20ImaGroupMinNumRxLinks INTEGER 1..8
  xldv20ImaGroupNeTxClkMode Xldv20ImaGroupTxClkMode
  xldv20ImaGroupFeTxClkMode Xldv20ImaGroupTxClkMode
  xldv20ImaGroupTxTimingRefLink Unsigned16
  xldv20ImaGroupRxTimingRefLink Unsigned16
  xldv20ImaGroupLastChange TimeTicks
  xldv20ImaGroupTxImaId INTEGER 0..255
  xldv20ImaGroupRxImaId INTEGER 0..255
  xldv20ImaGroupTxFrameLength Xldv20ImaFrameLength
  xldv20ImaGroupRxFrameLength Xldv20ImaFrameLength
  xldv20ImaGroupDiffDelayMax MilliSeconds
  xldv20ImaGroupLeastDelayLink Unsigned16
  xldv20ImaGroupDiffDelayMaxObs MilliSeconds
  xldv20ImaGroupAlphaValue INTEGER 1..2
  xldv20ImaGroupBetaValue INTEGER 1..5
  xldv20ImaGroupGammaValue INTEGER 1..5
  xldv20ImaGroupRunningSecs Gauge32
  xldv20ImaGroupUnavailSecs Counter32
  xldv20ImaGroupNeNumFailures Counter32
  xldv20ImaGroupFeNumFailures Counter32
  xldv20ImaGroupNumTxCfgLinks Gauge32
  xldv20ImaGroupNumRxCfgLinks Gauge32
  xldv20ImaGroupNumTxActLinks Gauge32
  xldv20ImaGroupNumRxActLinks Gauge32
  xldv20ImaGroupBandwidthUsage INTEGER

Xldv20ImaGroupMappingEntry  
SEQUENCE    
  xldv20ImaGroupMappingIndex Unsigned32

Xldv20ImaLinkEntry  
SEQUENCE    
  xldv20ImaLinkRowStatus Xldv20RowStatus
  xldv20ImaLinkGroupIndex Integer32
  xldv20ImaLinkNeTxState Xldv20ImaLinkState
  xldv20ImaLinkNeRxState Xldv20ImaLinkState
  xldv20ImaLinkFeTxState Xldv20ImaLinkState
  xldv20ImaLinkFeRxState Xldv20ImaLinkState
  xldv20ImaLinkNeRxFailureStatus Xldv20ImaLinkFailureStatus
  xldv20ImaLinkFeRxFailureStatus Xldv20ImaLinkFailureStatus
  xldv20ImaLinkTxLid INTEGER 0..7
  xldv20ImaLinkRxLid INTEGER 0..7
  xldv20ImaLinkImaViolations Counter32
  xldv20ImaLinkOifAnomalies Counter32
  xldv20ImaLinkNeSevErroredSecs Counter32
  xldv20ImaLinkFeSevErroredSecs Counter32
  xldv20ImaLinkNeUnavailSecs Counter32
  xldv20ImaLinkFeUnavailSecs Counter32
  xldv20ImaLinkNeTxUnusableSecs Counter32
  xldv20ImaLinkNeRxUnusableSecs Counter32
  xldv20ImaLinkFeTxUnusableSecs Counter32
  xldv20ImaLinkFeRxUnusableSecs Counter32
  xldv20ImaLinkNeTxNumFailures Counter32
  xldv20ImaLinkNeRxNumFailures Counter32
  xldv20ImaLinkFeTxNumFailures Counter32
  xldv20ImaLinkFeRxNumFailures Counter32
  xldv20ImaLinkTxStuffs Counter32
  xldv20ImaLinkRxStuffs Counter32

Xldv20LbpEntry  
SEQUENCE    
  xldv20LbpLoopLocId OCTET STRING
  xldv20LbpLoopMode Xldv20LoopMode

Xldv20MlbEntry  
SEQUENCE    
  xldv20MlbIndex Unsigned16
  xldv20MlbLoopLocId OCTET STRING

Xldv20ExternalAlarmEntry  
SEQUENCE    
  xldv20ExtAlarmIndex INTEGER
  xldv20ExtAlarmAdminState Xldv20AdminState
  xldv20ExtAlarmOperState Xldv20OperState
  xldv20ExtAlarmActivityState Xldv20ExtAlarmActivityState
  xldv20ExtAlarmSeverityIndex Xldv20AlmSevProfileIndex
  xldv20ExtAlarmFilteringIndex Xldv20AlmFiltProfileIndex
  xldv20ExtAlarmName OCTET STRING

Xldv20AlarmSeverityProfileEntry  
SEQUENCE    
  xldv20AlmSevProfileIndex Xldv20AlmSevProfileIndex
  xldv20AlmSevProfileRowStatus Xldv20RowStatus

Xldv20AlarmSeverityEntry  
SEQUENCE    
  xldv20AlmSevTrapId Xldv20TrapIds
  xldv20AlmSeverity Xldv20AlarmSeverity

Xldv20AlarmFilteringProfileEntry  
SEQUENCE    
  xldv20AlmFiltProfileIndex Xldv20AlmFiltProfileIndex
  xldv20AlmFiltProfileRowStatus Xldv20RowStatus

Xldv20AlarmFilteringEntry  
SEQUENCE    
  xldv20AlmFiltTrapId Xldv20TrapIds
  xldv20AlmTempFilter INTEGER

Xldv20AlarmListEntry  
SEQUENCE    
  xldv20AlmIndex INTEGER
  xldv20AlmNatureOfAlarm Xldv20TrapIds
  xldv20AlmSpecProblem INTEGER
  xldv20AlmSpecProblemText OCTET STRING
  xldv20AlmRepEntityId Integer32
  xldv20AlmRepSource Xldv20RepSource
  xldv20AlmFailedComponent Integer32
  xldv20AlmFailedComponentRepSource Xldv20RepSource
  xldv20AlmSeverityOfFailure Xldv20AlarmSeverity
  xldv20AlmPropRepairAction Integer32
  xldv20AlmTimeAndDate Integer32

Xldv20SutTaskTableEntry  
SEQUENCE    
  xldv20SutIndex Unsigned16
  xldv20SutPiuType OCTET STRING
  xldv20SutHwUnitIndex Unsigned16
  xldv20SutSwVersion OCTET STRING
  xldv20SutRequester Xldv20Requester
  xldv20SutUpgradeState Xldv20ControlReq
  xldv20SutUpgradeResult Xldv20ControlReq
  xldv20SutTimeStamp TimeTicks

Defined Values

xldv20 1.3.6.1.4.1.231.7.1.2.1.1.4
OBJECT IDENTIFIER    

xldv20SnmpMgmt 1.3.6.1.4.1.231.7.1.2.1.1.4.1
OBJECT IDENTIFIER    

xldv20CallP 1.3.6.1.4.1.231.7.1.2.1.1.4.2
OBJECT IDENTIFIER    

xldv20Hwm 1.3.6.1.4.1.231.7.1.2.1.1.4.3
OBJECT IDENTIFIER    

xldv20Tlm 1.3.6.1.4.1.231.7.1.2.1.1.4.4
OBJECT IDENTIFIER    

xldv20TlmOam 1.3.6.1.4.1.231.7.1.2.1.1.4.5
OBJECT IDENTIFIER    

xldv20Alarming 1.3.6.1.4.1.231.7.1.2.1.1.4.6
OBJECT IDENTIFIER    

xldv20Swm 1.3.6.1.4.1.231.7.1.2.1.1.4.7
OBJECT IDENTIFIER    

xldv20Dbm 1.3.6.1.4.1.231.7.1.2.1.1.4.8
OBJECT IDENTIFIER    

xldv20TlmIma 1.3.6.1.4.1.231.7.1.2.1.1.4.9
OBJECT IDENTIFIER    

xldv20Traps 1.3.6.1.4.1.231.7.1.2.1.1.4.10
OBJECT IDENTIFIER    

xldv20SnmpControl 1.3.6.1.4.1.231.7.1.2.1.1.4.1.1
OBJECT IDENTIFIER    

xldv20SnmTmnTrapFlowControl 1.3.6.1.4.1.231.7.1.2.1.1.4.1.1.1
TMN specific flag to suppress or not autonomous messages to TMN-OS. Default is noTraps after reload or first time power up.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20SuppressionType  

xldv20SnmLctTrapFlowControl 1.3.6.1.4.1.231.7.1.2.1.1.4.1.1.2
TMN specific flag to suppress or not autonomous messages to LCT. Default is noTraps after reload or first time power up.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20SuppressionType  

xldv20SnmControlReq 1.3.6.1.4.1.231.7.1.2.1.1.4.1.1.3
The user command to start an update of SNMP configuration file .
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20ControlReq  

xldv20SnmControlStatus 1.3.6.1.4.1.231.7.1.2.1.1.4.1.1.4
The status of control request. The start of an update of the configuration file will only be started if the SnmControlStatus is not requestBusy.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ControlStatus  

xldv20SnmLctConnected 1.3.6.1.4.1.231.7.1.2.1.1.4.1.1.5
If a LCT is connected to the DSLAM the attribute will be set .
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

xldv20SnmTmnConnected 1.3.6.1.4.1.231.7.1.2.1.1.4.1.1.6
The attribute is set by TMN-OS to indicate the receipt of the trap 'startupEnd' .
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

xldv20SnmMaxResponseTime 1.3.6.1.4.1.231.7.1.2.1.1.4.1.1.7
TMN-OS maximum wait time in seconds for responses .
Status: mandatory Access: read-only
OBJECT-TYPE    
  Integer32  

xldv20SnmTmnMaxNumber 1.3.6.1.4.1.231.7.1.2.1.1.4.1.1.8
The maximum number of TMNs which can be connected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned16  

xldv20SnmTmnSpecificIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.1.1.9
The specific index of a TMN which can be connected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned16  

xldv20SnmCallpPollingFlag 1.3.6.1.4.1.231.7.1.2.1.1.4.1.1.10
The TMN can poll this global alarm flag to see whether for any COH object an alarm is present.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20PollingFlagType  

xldv20SnmLctSessionPollingFlag 1.3.6.1.4.1.231.7.1.2.1.1.4.1.1.11
The TMN can poll this flag to see whether an LCT session has been terminated within the last polling period (value set). During the LCT session DSLAM configuration data may have been changed and therefore the TMN database is inconsistent. The TMN can perform a discovery to sychronize the data. The TMN should set the value to notSet before the discovery.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20PollingFlagType  

xldv20SnmControlReqResult 1.3.6.1.4.1.231.7.1.2.1.1.4.1.1.12
Result of the last user command.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ControlReq  

xldv20SnmStartupResult 1.3.6.1.4.1.231.7.1.2.1.1.4.1.1.13
Result of the last startup .
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20StartupResult  

xldv20SnmControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.1.4.1.1.14
The time stamp of the last command (end of command).
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

xldv20TmnTable 1.3.6.1.4.1.231.7.1.2.1.1.4.1.2
Table for TMN specific data. Instances of this managed entity shall be automatically SNMP configuration file has been read.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xldv20TmnEntry

xldv20TmnEntry 1.3.6.1.4.1.231.7.1.2.1.1.4.1.2.1
An entry in the xldv20TmnTable. Notifications : none.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20TmnEntry  

xldv20TmnIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.1.2.1.1
Index of TmnTable. Entries of the table with same index belong to the same TMN.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..11  

xldv20TmnOrLctTerminal 1.3.6.1.4.1.231.7.1.2.1.1.4.1.2.1.2
Specifies a LCT or TMN terminal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20TerminalType  

xldv20TmnInOrOutBand 1.3.6.1.4.1.231.7.1.2.1.1.4.1.2.1.3
Specifies whether communication is in or outband.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ChannelType  

xldv20TmnConnected 1.3.6.1.4.1.231.7.1.2.1.1.4.1.2.1.4
The attribute indicates whether this TMN/LCT is connected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

xldv20TmnTrapFlowControl 1.3.6.1.4.1.231.7.1.2.1.1.4.1.2.1.5
To suppress or not autonomous messages to TMN-OS. Default : noTraps after reload or first time power up.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20SuppressionType  

xldv20TmnLctSessionPollingFlag 1.3.6.1.4.1.231.7.1.2.1.1.4.1.2.1.6
TMN specific LCT session polling flag.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20PollingFlagType  

xldv20AtmCcControl 1.3.6.1.4.1.231.7.1.2.1.1.4.2.1
OBJECT IDENTIFIER    

xldv20ActOperationalState 1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.1
Unused.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20OperState  

xldv20ActControlReq 1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.2
COH (Connection Handling) user commands. Notifications : xldv20TrStateChangeOper. xldv20TrActCcCreation. xldv20TrActCcDeletion. xldv20TrActCcReload .
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20ControlReq  

xldv20ActControlStatus 1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.3
Indicates the status of a control request.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ControlStatus  

xldv20ActVpiNni 1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.4
Identifies the VPI value associated with the Local Exchange.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4095  

xldv20ActVpiUni 1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.5
The VPI value associated with the Network Termination.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..63  

xldv20ActVciNni 1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.6
The VCI value associated with the Local Exchange.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 32..3500  

xldv20ActVciUni 1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.7
The VCI value associated with the Network Termination.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 32..3500  

xldv20ActIfIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.8
The relevant interface index of the connected PPTP .
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned16  

xldv20ActPeakCellRateUpstream 1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.9
The upstream peak cell rate in bit/sec of the cross connect. ( Bit rate per ATM cell is 53*8 bit/sec ).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..160000000  

xldv20ActPeakCellRateDownstream 1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.10
The peak cell rate in downstream direction of the cross connect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..160000000  

xldv20ActCellDelayVariationToleranceUpstream 1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.11
The cell delay variation tolerance (in micro seconds) in upstream direction of the cross connect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 2..200000  

xldv20ActCellDelayVariationToleranceDownstream 1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.12
The cell delay variation tolerance (in micro seconds) in downstream direction of the cross connect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 2..200000  

xldv20ActTrafficType 1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.13
The traffic type of the cross connect. Supported traffic types are : cbr : Constant bit rate. ubr : Unspecified bit rate. nrtVbr : Non real time variable bit rate. rtVbr : Real time variable bit rate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20TrafficType  

xldv20ActTrafficDirection 1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.14
The traffic direction.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20TrafficDirection  

xldv20ActSustainableCellRateUpstream 1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.15
The upstream sustainable cell rate in bit/sec for nrtVbr traffic.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..155000000  

xldv20ActSustainableCellRateDownstream 1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.16
The downstream sustainable cell rate in bit/sec for nrtVbr traffic.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..155000000  

xldv20ActMaximumBurstSizeUpstream 1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.17
The upstream maximum burst size in cells for nrtVbr traffic.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1500  

xldv20ActMaximumBurstSizeDownstream 1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.18
The downstream maximum burst size in cells for nrtVbr traffic.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..1500  

xldv20ActSegmentEndPointNni 1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.19
Specifies whether the NNI VplTp/VclTp/VpcTp is a segment endpoint (yes) or a connecting point (no)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

xldv20ActSegmentEndPointUni 1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.20
Specifies whether the UNI VplTp/VclTp/VpcTp is a segment endpoint (yes) or a connecting point (no)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

xldv20ActEthMode 1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.21
The operational mode of the ethernet configuration: Available modes: bridging, routing, currentCofiguration (default) . In version V20 the Ethernet configuration is performed already when a NT is created. The option currentConfiguration keeps the current configuration data during cross connect creation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20EthNtMode  

xldv20ActEthE164Isp 1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.22
The telephon number of the Internet Service Provider.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

xldv20ActEthIpAddressNt 1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.23
The IP Address of the NT.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

xldv20ActEthIpAddressSubnetMaskNt 1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.24
The subnet mask of the NT.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

xldv20ActEthIpAddressCo 1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.25
The IP Address of the destination NT (office side).
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

xldv20ActEthIpAddressSubnetMaskCo 1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.26
The subnet mask of the CO.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

xldv20ActEthIpAddressRemoteRouter 1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.27
The subnet mask of the ISP router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

xldv20ActTestTypeNni 1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.28
The type of continuity check on NNI side. On F5 level (VC) segment only .
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20TestType  

xldv20ActContinuityCheckNni 1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.29
Specifies whether or not the continuity check at NNI side should be enabled for this instance of the ATM Cross Connection managed entity .
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20OperState  

xldv20ActEndpointTypeNni 1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.30
Specifies whether the NNI termination point VplTp/VclTp/VpcTp during countinuity check should be a source or sink or both (bidirectional connection only).
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20EndpointType  

xldv20ActTestTypeUni 1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.31
The type of continuity check on UNI side. On F5 level (VC) only segment.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20TestType  

xldv20ActContinuityCheckUni 1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.32
Specifies whether or not the continuity check at UNI should be enabled for this instance of the ATM Cross Connection managed entity.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20OperState  

xldv20ActEndpointTypeUni 1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.33
Specifies whether the UNI termination point VplTp/VclTp/VpcTp during countinuity check should be source or sink or both (bidirectional connection only).
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20EndpointType  

xldv20ActControlReqResult 1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.34
The result of the last user command.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ControlReq  

xldv20ActInbandVpi 1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.35
The value of the configured inband Vpi. The configured Vpi will be effective only after next reload.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

xldv20ActInbandVci 1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.36
The value of the configured inband Vci. The configured Vci will be effective only after next reload.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 32..127  

xldv20ActCallpTableIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.37
After a successfull creation or deletion of a cross connect COH provides the index of the created or deleted object.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4144  

xldv20ActMaxVciValue 1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.38
Configures the amount of VC's and their VCI values which are created within a VpcTp. Minimum VCI value is 32. Maximum VCI value is 3500 (due to HW limits).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 32..3500  

xldv20ActVbrCDVTUpstream 1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.39
The cell delay variation (in micro seconds) for VBR traffic in upstream direction.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 2..504000000  

xldv20ActVbrCDVTDownstream 1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.40
The cell delay variation (in micro seconds) for VBR traffic in downstream direction.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 2..504000000  

xldv20ActControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.41
The time stamp of the last command (end of command).
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

xldv20ActSegmentEndPointNt 1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.42
Specifies whether the VplTp/VpcTp at the NT is a segment endpoint (yes) or a connecting point (no).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

xldv20ActTestTypeNt 1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.43
The type of continuity check at NT (segment or endToEnd) .
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20TestType  

xldv20ActContinuityCheckNt 1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.44
Specifies whether or not the continuity check at NT should be enabled . NOTE : continuity check not supported at VccTp (F5 level) .
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20OperState  

xldv20ActEndpointTypeNt 1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.45
Specifies whether the endpoint VplTp/VpcTp at NT should be a source or sink or both (bidirectional connection only) for continuity check cells.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20EndpointType  

xldv20ActCDVTAutoConfig 1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.46
If yes is selected the policing parameter CDVT (cell delay variation tolerance) is determined automatically depending on the configured cell rate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

xldv20AtmCrossConnectTable 1.3.6.1.4.1.231.7.1.2.1.1.4.2.2
The ATM VP cross connect table. This managed entity is used to represent the cross-connect relationship between two Vpl termination points. Instances of this managed entity shall be automatically created and deleted during ATM Connect and ATM Disconnect actions.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xldv20AtmCrossConnectEntry

xldv20AtmCrossConnectEntry 1.3.6.1.4.1.231.7.1.2.1.1.4.2.2.1
An entry in the ATM cross connect table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20AtmCrossConnectEntry  

xldv20AccOperationalState 1.3.6.1.4.1.231.7.1.2.1.1.4.2.2.1.1
Identifies whether or not this instance of the ATM Cross Connection managed entity is capable of performing its normal function ( i.e. switching cells ). Altering this attribute is without reporting this state change via the trap 'xldv20TrStateChangeOper'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20OperState  

xldv20AccTerminationPointA 1.3.6.1.4.1.231.7.1.2.1.1.4.2.2.1.2
The instance of the VPL termination point within the DSLAM at the LE side.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4096  

xldv20AccTerminationPointZ 1.3.6.1.4.1.231.7.1.2.1.1.4.2.2.1.3
The instance of the VPL termination point within the DSLAM at the NT side.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4096  

xldv20AccLineIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.2.2.1.4
The external line index. The TLM interfaces (see IFTable) with same line index blong to the same line.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned16  

xldv20AccEthVpcIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.2.2.1.5
For cross connects at the LIETH a pointer to the belonging VpcTp. The value is the entry number in the xldv20VpcTpTable. For all other cross connects the value is always 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..2000  

xldv20AccEthVccIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.2.2.1.6
For cross connects at the LIETH a pointer to the belonging VccTp. The value is the entry number in the xldv20VccTpTable. For all other cross connects the value is always 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1000  

xldv20AccVpiNniIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.2.2.1.7
Index of this table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2000  

xldv20AccAlarmState 1.3.6.1.4.1.231.7.1.2.1.1.4.2.2.1.8
Indicates whether for the cross connect an alarm is present or not.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20CallpAlarmState  

xldv20AccAdminState 1.3.6.1.4.1.231.7.1.2.1.1.4.2.2.1.9
This attribute is used to activate (unlock) and deactivate (lock) the VPL cross connection. The cross connect is removed within the ATM ASIC, the configuration data of the cross connect are still available within the DSLAM .
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20AdminState  

xldv20AccAtmfVplIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.2.2.1.10
For cross connects at the ATMF port of NT this value identifies the belonging VplTp . The value is the entry number in the xldv20VplTpTable. For all other cross connects the value is always 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..4000  

xldv20VplTpTable 1.3.6.1.4.1.231.7.1.2.1.1.4.2.3
This table contains the entries for Vpl termination points (VplTp).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xldv20VplTpEntry

xldv20VplTpEntry 1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1
Represent the VPL termination points on an ATM NE.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20VplTpEntry  

xldv20VplOperationalState 1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1.1
This read-only attribute identifies whether or not the VPL termination is capable of performing its normal functions (in-service or out-of-service).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20OperState  

xldv20VplVpiValue 1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1.2
The VPI value associated with the VP link being terminated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..4095  

xldv20VplHwUnitIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1.3
The HwUnitIndex of HWM sublayer: LU for VplNNi or SU for VplUNI.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned16  

xldv20VplIfIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1.4
The TLM interface index of the connected PPTP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned16  

xldv20VplPeakCellRateUpstream 1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1.5
The upstream peak cell rate in bit/sec.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32  

xldv20VplPeakCellRateDownstream 1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1.6
The downstream peak cell rate in bit/sec.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32  

xldv20VplCellDelayVariationToleranceUpstream 1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1.7
The cell delay variation (in micro seconds).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 2..200000  

xldv20VplCellDelayVariationToleranceDownstream 1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1.8
The cell delay variation (in micro seconds).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 2..200000  

xldv20VplTrafficType 1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1.9
The traffic type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20TrafficType  

xldv20VplTrafficDirection 1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1.10
The traffic direction.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20TrafficDirection  

xldv20VplConnectivityPointer 1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1.11
This attribute serves as a pointer to the instance of the VPL termination point managed entity instance (in the ATM NE) it is cross connected to.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned16  

xldv20VplLineIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1.12
This value identifies the belonging line.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned16  

xldv20VplSegmentEndPoint 1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1.13
This value specifies whether the VplTp is a segment endpoint (yes) or a connecting point (no).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

xldv20VplSustainableCellRateUpstream 1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1.14
The sustainable upstream cell rate in bits/sec for nrtVbr traffic.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32  

xldv20VplSustainableCellRateDownstream 1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1.15
The sustainable downstream cell rate in bits/sec for nrtVbr traffic.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32  

xldv20VplMaximumBurstSizeUpstream 1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1.16
The maximum upstream burst size tolerance in cells for nrtVbr traffic.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1500  

xldv20VplMaximumBurstSizeDownstream 1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1.17
The maximum downstream burst size tolerance in cells for nrtVbr traffic.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1500  

xldv20VplAlarmSeverityIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1.18
It is a pointer to the instance of the alarm severity assignment profile managed entity that contains the severity assignments for the alarms reported by this managed entity.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20AlmSevProfileIndex  

xldv20VplAlarmFilteringIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1.19
It is a pointer to the instance of the alarm filtering assignment profile managed entity that contains the filtering assignments for the alarms reported by this managed entity. (Not implemented)
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20AlmFiltProfileIndex  

xldv20VplCvpIndexSegment 1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1.20
The index of of the related entry in the ContinuityCheckVpTable. The entry is created when the COC is enabled (via command or during cross connect creation).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..2000  

xldv20VplIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1.21
The Index of this table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4000  

xldv20VplLOCAlarm 1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1.22
Indicates an LOC alarm and its direction.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20TpAlarmState  

xldv20VplVbrCDVTUpstream 1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1.23
The cell delay variation (in micro seconds) for VBR traffic in upstream direction of the VP cross connect.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 2..504000000  

xldv20VplVbrCDVTDownstream 1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1.24
The cell delay variation (in micro seconds) for VBR traffic in downstream direction of the VP cross connect.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 2..504000000  

xldv20VpcTpTable 1.3.6.1.4.1.231.7.1.2.1.1.4.2.4
This table contains the entries for VPC termination points.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xldv20VpcTpEntry

xldv20VpcTpEntry 1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1
Each entry represents the point in the switch where the VPC and its associated overhead (F4 OAM cells) are terminated or originated. Instances of this managed entity may be created automatically by the ATM NE when VP or VC cross connects are created at at an Ethernet port. Or they are created by command. Similarly instances of this managed entity may be deleted automatically by the ATM NE or as a result of an ATM Cross Connect release request. Notifications : xldv20TrRDI. xldv20TrAIS alarms when fault is detected or cleared. xldv20TrStateChangeOper.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20VpcTpEntry  

xldv20VpcOperationalState 1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.1
The operational state identifies whether or not the VpcTp is capable of performing its normal functions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20OperState  

xldv20VpcVpiValue 1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.2
Identifies the VPI value associated with the VP link being terminated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..4095  

xldv20VpcHwUnitIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.3
The unique identifier for hardware units, here the HWM sublayer (LU* or or SU or LI*).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned16  

xldv20VpcIfIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.4
The interface index of the connected PPTP. For Vpc at LU the PPTP in the LU. For Vpc at SU and LI the PPTP at the LI.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned16  

xldv20VpcPeakCellRateUpstream 1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.5
The upstream peak cell rate in bit/sec of the VP cross connect.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32  

xldv20VpcPeakCellRateDownstream 1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.6
The downstream peak cell rate in bit/sec of the VP cross connect.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32  

xldv20VpcCellDelayVariationToleranceUpstream 1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.7
The upstream cell delay variation (in micro seconds) of the VpcTp .
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 2..200000  

xldv20VpcCellDelayVariationToleranceDownstream 1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.8
The downstream cell delay variation (in micro seconds) of the VpcTp.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 2..200000  

xldv20VpcTrafficType 1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.9
The traffic type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20TrafficType  

xldv20VpcTrafficDirection 1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.10
The traffic direction.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20TrafficDirection  

xldv20VpcLineIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.11
The belonging line.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned16  

xldv20VpcSegmentEndPoint 1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.12
This value specifies whether the VpcTp is a segment endpoint (yes) or a connecting point (no).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

xldv20VpcSustainableCellRateUpstream 1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.13
The sustainable upstream cell rate in bits/sec for nrtVbr traffic.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32  

xldv20VpcSustainableCellRateDownstream 1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.14
The sustainable downstream cell rate in cells/sec for nrtVbr traffic.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32  

xldv20VpcMaximumBurstSizeUpstream 1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.15
The maximum upstream burst size tolerance in cells for nrtVbr traffic.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1500  

xldv20VpcMaximumBurstSizeDownstream 1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.16
The maximum downstream burst size tolerance in cells for nrtVbr traffic.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1500  

xldv20VpcAlarmSeverityIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.17
It is a pointer to the instance of the alarm severity assignment profile managed entity that contains the severity assignments for the alarms reported by this managed entity.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20AlmSevProfileIndex  

xldv20VpcAlarmFilteringIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.18
It is a pointer to the instance of the alarm filtering assignment profile managed entity that contains the filtering assignments for the alarms reported by this managed entity. (Not implemented)
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20AlmFiltProfileIndex  

xldv20VpcCvpIndexSegment 1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.19
The index of related entry in ContinuityCheckVpcTpTable concerning an enabled continuity check on segment level.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..2000  

xldv20VpcCvpIndexEndToEnd 1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.20
The index of related entry in ContinuityCheckVpcTpTable concerning a enabled endToEnd continuity check.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..2000  

xldv20VpcIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.21
The Index of this table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2000  

xldv20VpcAISAlarm 1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.22
Indicates an AIS alarm and its direction.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20TpAlarmState  

xldv20VpcRDIAlarm 1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.23
Indicates an RDI alarm and its direction.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20TpAlarmState  

xldv20VpcLOCAlarm 1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.24
Indicates an LOC alarm and its direction.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20TpAlarmState  

xldv20VpcNumberOfVcs 1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.25
The number of VCs which are created within the VpcTp. The range of VCI values : 32 plus this number - 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..3469  

xldv20VpcVbrCDVTUpstream 1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.26
The cell delay variation (in micro seconds) for VBR traffic in upstream direction of the VpcTp.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 2..504000000  

xldv20VpcVbrCDVTDownstream 1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.27
The cell delay variation (in micro seconds) for VBR traffic in downstream direction of the VpcTp.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 2..504000000  

xldv20VpcEmSpecific 1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.28
EM 45020 specific attribute.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned16  

xldv20VpcEthVpcIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.29
Used to address the corresponding entry in the VpcTpTable. Default is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..2000  

xldv20VpcAtmfVplIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.30
Used to address the corresponding entry in the VplTpTable. Default is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..4000  

xldv20VccTpTable 1.3.6.1.4.1.231.7.1.2.1.1.4.2.5
VccTp table for VC termination points. Entries are created for Ethernet NTs when cross connects are created. Entries are deleted with the cross connect.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xldv20VccTpEntry

xldv20VccTpEntry 1.3.6.1.4.1.231.7.1.2.1.1.4.2.5.1
Each entry represents the point in the switch where the VCC and its associated overhead (F4 OAM cells) are terminated or originated. Instances of this managed entity may be created automatically by the ATM NE or as a result of an Vpl and Vcl cross connect request at an Ethernet port. Similarly instances of this managed entity may be deleted automatically by the ATM NE as a result of an cross connect deletion request. Notifications : xldv20TrStateChangeOper. xldv20TrObjCreate. xldv20TrObjDelete. xldv20TrRDI. xldv20TrAIS. xldv20TrLOC alarms when fault is detected or cleared.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20VccTpEntry  

xldv20VccOperationalState 1.3.6.1.4.1.231.7.1.2.1.1.4.2.5.1.1
The operational state identifies whether or not the VPL termination is capable of performing its normal functions (in-service or out-of-service).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20OperState  

xldv20VccVciValue 1.3.6.1.4.1.231.7.1.2.1.1.4.2.5.1.2
This attribute identifies the VCI value associated with the VC link being terminated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 32..3500  

xldv20VccVpcIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.2.5.1.3
Index of the related VpcTp.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2000  

xldv20VccHwUnitIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.2.5.1.4
HwUnitIndex of the dependent PIU (LI).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned16  

xldv20VccAlarmSeverityIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.2.5.1.5
It is a pointer to the instance of the alarm severity assignment profile managed entity that contains the severity assignments for the alarms reported by this managed entity.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20AlmSevProfileIndex  

xldv20VccAlarmFilteringIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.2.5.1.6
It is a pointer to the instance of the alarm filtering assignment profile managed entity that contains the filtering assignments for the alarms reported by this managed entity. (Not supported yet).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20AlmFiltProfileIndex  

xldv20VccLineIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.2.5.1.7
This value identifies the belonging line .
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned16  

xldv20VccIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.2.5.1.8
A unique value to identify an entry in the VCC TP table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1000  

xldv20VccAISAlarm 1.3.6.1.4.1.231.7.1.2.1.1.4.2.5.1.9
Indicates an AIS alarm and its direction.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20TpAlarmState  

xldv20VccRDIAlarm 1.3.6.1.4.1.231.7.1.2.1.1.4.2.5.1.10
Indicates an RDI alarm and its direction.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20TpAlarmState  

xldv20VccLOCAlarm 1.3.6.1.4.1.231.7.1.2.1.1.4.2.5.1.11
Indicates an LOC alarm and its direction.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20TpAlarmState  

xldv20VccCvcIndexSegment 1.3.6.1.4.1.231.7.1.2.1.1.4.2.5.1.12
The index of the related entry in the xldv20ContinuityCheckVcTable for an enabled continuity check on segment level.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned16  

xldv20VccCvcIndexEndToEnd 1.3.6.1.4.1.231.7.1.2.1.1.4.2.5.1.13
The index of the related entry in the xldv20ContinuityCheckVcTable for an enabled endToEnd continuity check.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned16  

xldv20VcCrossConnectTable 1.3.6.1.4.1.231.7.1.2.1.1.4.2.6
The VC cross connect table for Virtual Channel point-to-point cross connections. This managed entity is used to represent the VC-cross-connect relationship between two termination points. Instances of this managed entity shall be automatically created and deleted on VCX Connect and VCX Disconnect actions .
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xldv20VcCrossConnectEntry

xldv20VcCrossConnectEntry 1.3.6.1.4.1.231.7.1.2.1.1.4.2.6.1
An entry in the VC cross connect table. Notifications : xldv20TrStateChangeOper.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20VcCrossConnectEntry  

xldv20VcxOperationalState 1.3.6.1.4.1.231.7.1.2.1.1.4.2.6.1.1
The Operational State of Vc cross connect.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20OperState  

xldv20VcxTerminationPointA 1.3.6.1.4.1.231.7.1.2.1.1.4.2.6.1.2
Identifies the instance of the VCL termination point that represents the VCL at the LE side.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4096  

xldv20VcxTerminationPointZ 1.3.6.1.4.1.231.7.1.2.1.1.4.2.6.1.3
Identifies the instance of the VCL termination point that represents the VCL at the NT side.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4096  

xldv20VcxLineIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.2.6.1.4
The belonging line index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned16  

xldv20VcxEthVpcIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.2.6.1.5
Used to address the corresponding entry in the VpcTpTable. Default is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..2000  

xldv20VcxEthVccIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.2.6.1.6
Used to address the corresponding entry in the VccTP Table. Default is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1000  

xldv20VcxVpcNniIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.2.6.1.7
Used to address the corresponding entry at NNI in the VpcTpTable. Default is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned16  

xldv20VcxVpcUniIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.2.6.1.8
Used to address the corresponding entry at UNI in the VpcTP Table. Default is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned16  

xldv20VcxIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.2.6.1.9
Index of VcCrossConnectTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2000  

xldv20VcxAlarmState 1.3.6.1.4.1.231.7.1.2.1.1.4.2.6.1.10
This attribute indicates whether for the cross connect an alarm is present or not.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20CallpAlarmState  

xldv20VcxAdminState 1.3.6.1.4.1.231.7.1.2.1.1.4.2.6.1.11
This attribute is used to activate (unlock) and deactivate (lock) the VCL cross connection. The cross connect is removed within the ATM ASIC, the configuration data of the cross connect are still available within the DSLAM .
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20AdminState  

xldv20VcxAtmfVplIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.2.6.1.12
For cross connects at the ATMF port of NT this value identifies the belonging VplTp . The value is the entry number in the xldv20VplTpTable. For all other cross connects the value is always 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..4000  

xldv20VclTpTable 1.3.6.1.4.1.231.7.1.2.1.1.4.2.7
This table contains the entries for the VC links.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xldv20VclTpEntry

xldv20VclTpEntry 1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1
The entries represent the termination of VCLs on an ATM NE. An instance of the VC Cross Connection managed entity may be used to relate two instances of the VCL Termination Point managed entity (i.e. for point-to-point cross connection). Instances of this managed entity may be created automatically by the ATM NE or as a result of an VC cross connect request. Similarly instances of this managed entity may be deleted automatically by the ATM NE or as a result of an VC Cross Connect release request. Notifications: xldv20TrStateChangeOper.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20VclTpEntry  

xldv20VclOperationalState 1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.1
The operational state of VclTp.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20OperState  

xldv20VclVpiValue 1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.2
The VPI value associated with the VC link being terminated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..4095  

xldv20VclVciValue 1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.3
The VCI value associated with the VC link being terminated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 32..3500  

xldv20VclHwUnitIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.4
The HwUnitIndex of the dependent HW unit. Here the HWM sublayer: the SU for VclUni or the LU for VclNni .
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned16  

xldv20VclIfIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.5
The interface index of the connected PPTP. It is the PPTP at the LU for VclUni. The PPTP at the LI for VclNni.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned16  

xldv20VclPeakCellRateUpstream 1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.6
The upstream peak cell rate in bit/sec of the VC cross connect.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32  

xldv20VclPeakCellRateDownstream 1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.7
The downstream peak cell rate in bit/sec of the VC cross connect.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32  

xldv20VclCellDelayVariationToleranceUpstream 1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.8
The upstream cell delay variation (in micro seconds) of the VC cross connect.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 2..200000  

xldv20VclCellDelayVariationToleranceDownstream 1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.9
The downstream cell delay variation (in micro seconds) of the VC cross connect.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 2..200000  

xldv20VclTrafficType 1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.10
This attribute identifies the traffic type of the VC cross connect.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20TrafficType  

xldv20VclTrafficDirection 1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.11
The traffic direction.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20TrafficDirection  

xldv20VclConnectivityPointer 1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.12
A pointer to the instance of VclTp it is cross connected to.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned16  

xldv20VclLineIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.13
Identifies the belonging line.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned16  

xldv20VclSegmentEndPoint 1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.14
Specifies whether the VclTp is a segment endpoint (yes) or a connecting point (no).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

xldv20VclSustainableCellRateUpstream 1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.15
The sustainable upstream cell rate in bits/sec for nrtVbr traffic.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32  

xldv20VclSustainableCellRateDownstream 1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.16
The sustainable downstream cell rate in bits/sec for nrtVbr traffic.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32  

xldv20VclMaximumBurstSizeUpstream 1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.17
The maximum upstream burst size tolerance in cells for nrtVbr traffic.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1500  

xldv20VclMaximumBurstSizeDownstream 1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.18
The maximum downstream burst size tolerance in cells for nrtVbr traffic.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1500  

xldv20VclAlarmSeverityIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.19
It is a pointer to the instance of the alarm severity assignment profile managed entity that contains the severity assignments for the alarms reported by this managed entity.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20AlmSevProfileIndex  

xldv20VclAlarmFilteringIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.20
It is a pointer to the instance of the alarm filtering assignment profile managed entity that contains the filtering assignments for the alarms reported by this managed entity. (Not implemented)
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20AlmFiltProfileIndex  

xldv20VclCvcIndexSegment 1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.21
The index of iof the related entry in the xldv20ContinuityCheckVclTpTable. The entry is created when the continuity check is enabled on segment level.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned16  

xldv20VclIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.22
Index of this table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4000  

xldv20VclLOCAlarm 1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.23
Indicates an LOC alarm and its direction.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20TpAlarmState  

xldv20VclVpcIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.24
A pointer to the belonging VpcTP in the VpcTp table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2000  

xldv20VclVbrCDVTUpstream 1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.25
The cell delay variation (in micro seconds) for VBR traffic in upstream direction of the VclTp.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 2..504000000  

xldv20VclVbrCDVTDownstream 1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.26
The cell delay variation (in micro seconds) for VBR traffic in downstream direction of the VclTp.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 2..504000000  

xldv20EthernetConfigTable 1.3.6.1.4.1.231.7.1.2.1.1.4.2.10
The Ethernet Configuration Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xldv20EthernetConfigEntry

xldv20EthernetConfigEntry 1.3.6.1.4.1.231.7.1.2.1.1.4.2.10.1
The entry of the Ethernet Configuration Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20EthernetConfigEntry  

xldv20EthMode 1.3.6.1.4.1.231.7.1.2.1.1.4.2.10.1.1
The operational mode of the ethernet configuration: Available modes: bridging, routing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20EthNtMode  

xldv20EthE164Isp 1.3.6.1.4.1.231.7.1.2.1.1.4.2.10.1.2
The telephon number of the Internet Service Provider, parameter for ipForwarding- mode
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

xldv20EthIpAddressNt 1.3.6.1.4.1.231.7.1.2.1.1.4.2.10.1.3
The IP Address of the NT, parameter for ipForwarding - mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

xldv20EthIpAddressSubnetMaskNt 1.3.6.1.4.1.231.7.1.2.1.1.4.2.10.1.4
The subnet mask of the NT , parameter for ipForwarding- mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

xldv20EthIpAddressCo 1.3.6.1.4.1.231.7.1.2.1.1.4.2.10.1.5
The IP Address of the destination NT (office side), parameter for ipForwarding- mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

xldv20EthIpAddressSubnetMaskCo 1.3.6.1.4.1.231.7.1.2.1.1.4.2.10.1.6
The subnet mask of the CO , parameter for ipForwarding- mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

xldv20EthIpAddressRemoteRouter 1.3.6.1.4.1.231.7.1.2.1.1.4.2.10.1.7
The subnet mask of the ISP router , parameter for ipForwarding- mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

xldv20ContinuityCheckVpTable 1.3.6.1.4.1.231.7.1.2.1.1.4.2.11
The Continuity Check VP table. Holds entries for enabled continuity checks at VP level. Entries are created when Vpl cross connects or VpcTps with enabled continuity check are created or when continuity check is enabled via command. Entries are deleted when the continuity check is disabled (via xldv20ContinuityCheckControl) .
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xldv20ContinuityCheckVpEntry

xldv20ContinuityCheckVpEntry 1.3.6.1.4.1.231.7.1.2.1.1.4.2.11.1
The entry represents the attributes of an enabled continuity check at a VplTp or VpcTp. Notifications : none.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20ContinuityCheckVpEntry  

xldv20CvpIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.2.11.1.1
The Index of this table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned16  

xldv20CvpEndpointType 1.3.6.1.4.1.231.7.1.2.1.1.4.2.11.1.2
The configured endpoint type (source or sink or both) for countinuity check .
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20EndpointType  

xldv20CvpTestType 1.3.6.1.4.1.231.7.1.2.1.1.4.2.11.1.3
The configured type of continuity check (segment or endToEnd) .
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20TestType  

xldv20CvpOperationalState 1.3.6.1.4.1.231.7.1.2.1.1.4.2.11.1.4
Identifies whether an enabled continuity check is is working (value enabled) or not.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20OperState  

xldv20CvpVpTpIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.2.11.1.5
Index of the related VplTp or VpcTp .
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..5000  

xldv20CvpObjectType 1.3.6.1.4.1.231.7.1.2.1.1.4.2.11.1.6
Specifies the type of related COH object ( VplTp or VpcTp ) .
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20RepSource  

xldv20ContinuityCheckVcTable 1.3.6.1.4.1.231.7.1.2.1.1.4.2.12
The continuity check configuration table for COC on VC level. Entries in this table are created when Vcl cross connects with enabled continuity check are created or when the continuity check is enabled via command. Entries are deleted when the continuity check is disabled (via xldv20ContinuityCheckControl) .
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xldv20ContinuityCheckVcEntry

xldv20ContinuityCheckVcEntry 1.3.6.1.4.1.231.7.1.2.1.1.4.2.12.1
The entry represents the attributes of an enabled continuity check . Notifications : none.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20ContinuityCheckVcEntry  

xldv20CvcIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.2.12.1.1
Index of table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned16  

xldv20CvcEndpointType 1.3.6.1.4.1.231.7.1.2.1.1.4.2.12.1.2
The configured endpoint type ( source or sink or both) for countinuity check .
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20EndpointType  

xldv20CvcTestType 1.3.6.1.4.1.231.7.1.2.1.1.4.2.12.1.3
The type of continuity check segment or endToEnd .
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20TestType  

xldv20CvcOperationalState 1.3.6.1.4.1.231.7.1.2.1.1.4.2.12.1.4
This read-only attribute identifies whether or not a continuitycheck is enabled .
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20OperState  

xldv20CvcVcTpIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.2.12.1.5
Index of the related VC object (currently VclTp only) .
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4000  

xldv20CvcObjectType 1.3.6.1.4.1.231.7.1.2.1.1.4.2.12.1.6
Specifies the type of related COH VC object ( VclTp ) .
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20RepSource  

xldv20ContinuityCheckControl 1.3.6.1.4.1.231.7.1.2.1.1.4.2.13
OBJECT IDENTIFIER    

xldv20CocControlReq 1.3.6.1.4.1.231.7.1.2.1.1.4.2.13.1
Control group for activating/deactivating the continuity check at the source/sink of a VPL or VCL connection. The user command attribute to activate a continuity check (continuityCheckRequest) or to deactivate (noRequest). Notifications : none .
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20ControlReq  

xldv20CocControlStatus 1.3.6.1.4.1.231.7.1.2.1.1.4.2.13.2
The status of the control request. The value requestIdle will be set after startup/recovery or after a running test was aborted by the SNMP manager.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ControlStatus  

xldv20CocEndpointType 1.3.6.1.4.1.231.7.1.2.1.1.4.2.13.3
This attribute specifies whether the source or sink of a should be enabled/disabled for countinuity check .
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20EndpointType  

xldv20CocObjectType 1.3.6.1.4.1.231.7.1.2.1.1.4.2.13.4
Selects the type of COH object.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20RepSource  

xldv20CocTestType 1.3.6.1.4.1.231.7.1.2.1.1.4.2.13.5
The type of continuity check (segment or endToEnd) .
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20TestType  

xldv20CocIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.2.13.6
If the continuity check should be enabled it is the index of the selected COH object. If the continuity check should be disabled it is the index xldv20VplCvpIndexSegment or xldv20VpcCvpIndexSegment. xldv20VpcCvpIndexEndToEnd or xldv20VclCvcIndexSegment.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned16  

xldv20CocControlReqResult 1.3.6.1.4.1.231.7.1.2.1.1.4.2.13.7
The result of the last user command.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ControlReq  

xldv20CocControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.1.4.2.13.8
The time stamp of the last command (end of command).
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

xldv20InbandTmn 1.3.6.1.4.1.231.7.1.2.1.1.4.2.14
OBJECT IDENTIFIER    

xldv20InbandVpiCurrent 1.3.6.1.4.1.231.7.1.2.1.1.4.2.14.1
Inband TMN configuration object. Identifies the current VPI value of inband TMN channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..4095  

xldv20InbandVciCurrent 1.3.6.1.4.1.231.7.1.2.1.1.4.2.14.2
Identifies the current Vci value of inband TMN channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

xldv20InbandVpiConfig 1.3.6.1.4.1.231.7.1.2.1.1.4.2.14.3
Identifies the configured Vpi value of inband TMN channel which becomes effective only after reload.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..4095  

xldv20InbandVciConfig 1.3.6.1.4.1.231.7.1.2.1.1.4.2.14.4
Identifies the configured Vci value of inband TMN channel which becomes effective only after reload.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

xldv20AtmNe 1.3.6.1.4.1.231.7.1.2.1.1.4.3.1
OBJECT IDENTIFIER    

xldv20NeLocation 1.3.6.1.4.1.231.7.1.2.1.1.4.3.1.1
Describes the location of the NetElement, e.g. Hofmannstr. 51 .
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..80)  

xldv20NeVendor 1.3.6.1.4.1.231.7.1.2.1.1.4.3.1.2
Contains the vendor of the NetElement, Siemens AG .
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

xldv20NeVersion 1.3.6.1.4.1.231.7.1.2.1.1.4.3.1.3
Contains the version of the NetElement, XLD V20
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

xldv20NeExternalTime 1.3.6.1.4.1.231.7.1.2.1.1.4.3.1.4
The external Time of the NetElement in seconds from January 1st 1970. The TMN-OS should set this time after firsttime power up, coldstart, warmstart or reload and to refresh it once a day.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TimeTicks  

xldv20NeTimeZone 1.3.6.1.4.1.231.7.1.2.1.1.4.3.1.5
Specifies the time zone of the netelement as time difference to Greenwich Mean Time (GMT), e.g. GMT+1 or GMT-5.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20TimeZone  

xldv20NeDescriptorFileName 1.3.6.1.4.1.231.7.1.2.1.1.4.3.1.6
The name of the descriptor file. Initialized after reload by SW upgrade .
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

xldv20NeExternalTime45020 1.3.6.1.4.1.231.7.1.2.1.1.4.3.1.7
The external Time of the NetElement in seconds. The TMN-45020 sets this time after first time power up, coldstart, warmstart or reload and refreshes the time in a period of 24h . The basis is January 1st 1999, 0:00
Status: mandatory Access: read-write
OBJECT-TYPE    
  TimeTicks  

xldv20NeSummerTime 1.3.6.1.4.1.231.7.1.2.1.1.4.3.1.8
Specifies whether summer time (day light saving time DST) or winter time is valid. Normally the clock is turned 1 hour ahead at begin of summer time and 1 hour back at end. Default is winterTime.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20DayLightSavingTime  

xldv20HwUnitTable 1.3.6.1.4.1.231.7.1.2.1.1.4.3.2
The XLD hardware unit table. This table models the Equipment, Equipment Holder and Plug-In Unit management entities .
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xldv20HwUnitEntry

xldv20HwUnitEntry 1.3.6.1.4.1.231.7.1.2.1.1.4.3.2.1
An entry in the xldv20HwUnitTable. Notifications : none.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20HwUnitEntry  

xldv20HwUnitIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.3.2.1.1
A unique value to identify a hardware unit within the ATM agent. It is used as index for the tables xldv20HwEquipTable, xldv20HwEquipHolderTable and xldv20HwPlugInUnitTable .
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned16  

xldv20HwUnitType 1.3.6.1.4.1.231.7.1.2.1.1.4.3.2.1.2
Identifies the general type of this hardware unit. The values are equipment, equipmentHolder and plugInUnit .
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20HwUnitType  

xldv20HwContainmentTable 1.3.6.1.4.1.231.7.1.2.1.1.4.3.3
The hardware unit containment table. This table describes the containment relationships that maintain between Equipment, Equipment Holder and Plug-In Unit entities .
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xldv20HwContainmentEntry

xldv20HwContainmentEntry 1.3.6.1.4.1.231.7.1.2.1.1.4.3.3.1
An entry in the hardware unit containment table. Each entry of this type identifies two hardware units, one of which is contained directly within the other . Notifications : none.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20HwContainmentEntry  

xldv20HwContainingUnitIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.3.3.1.1
The HwUnitIndex (in the xldv20HwUnitTable), of the containing hardware unit in this pair .
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned16  

xldv20HwContainedUnitAddr 1.3.6.1.4.1.231.7.1.2.1.1.4.3.3.1.2
A number uniquely identifying, within the containing hardware unit, the contained unit. Contained unit should be addressed starting at 1. If the contained component is an Equipment Holder, this object represents its physical location (e.g. slot number). If a single piece of Equipment contains both Equipment Holder and other Equipment objects, the Equipment Holders should have the lowest-valued addresses, so this relationship can be maintained. A Plug-In Unit always has an address of 1 .
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..512  

xldv20HwContainedUnitIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.3.3.1.3
The hwUnitIndex of the contained unit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned16  

xldv20HwEquipTable 1.3.6.1.4.1.231.7.1.2.1.1.4.3.4
The hardware equipment table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xldv20HwEquipEntry

xldv20HwEquipEntry 1.3.6.1.4.1.231.7.1.2.1.1.4.3.4.1
Entry of the HW equipment table. The entries represent the various manageable physical components of the ATM NE that are not modelled via the Plug-In Unit managed entity. An instance of this managed entity shall be automati- cally created by the ATM NE immediately following the initialization/installation of the externally manageable physical component in the ATM NE. Notifications : xldv20TrObjCreate. xldv20TrObjDelete .
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20HwEquipEntry  

xldv20EquType 1.3.6.1.4.1.231.7.1.2.1.1.4.3.4.1.1
Indicates whether the equipment is a DSLAM, ntAdsl, ntVdsl or a ntCpe ( customer premise equipment) .
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

xldv20EquLocation 1.3.6.1.4.1.231.7.1.2.1.1.4.3.4.1.2
Identifies the specific or general location of the ATM NE component .
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..80)  

xldv20EquUserLabel 1.3.6.1.4.1.231.7.1.2.1.1.4.3.4.1.3
Assignis user friendly name to the associated managed entity .
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..80)  

xldv20EquConnectedPiuIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.3.4.1.4
This attribute is used to show the PIU to which the NT is connected (HwUnitIndex) . In case of DSLAM value is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned16  

xldv20EquConnectedPiuPort 1.3.6.1.4.1.231.7.1.2.1.1.4.3.4.1.5
The port ID of the connected PIU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

xldv20HwEquipHolderTable 1.3.6.1.4.1.231.7.1.2.1.1.4.3.5
The equipment holder table .
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xldv20HwEquipHolderEntry

xldv20HwEquipHolderEntry 1.3.6.1.4.1.231.7.1.2.1.1.4.3.5.1
Entry of the equipment holder table. The entries represent physical resources of the ATM NE holding other physical resources. Examples of resources represented by instances of this managed entity are shelves and slots. An instance of this managed entity shall exist for each shelf and slot of the ATM NE. Instances shall be auto- matically created and reported by the ATM NE once system initialization is complete. Notifications : xldv20TrObjCreate . xldv20TrObjDelete . xldv20TrSwVersionSet when xldv20EqhSwVersion. xldv20EqhMnemoCode,xldv20EqhFwItemNumber set.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20HwEquipHolderEntry  

xldv20EqhType 1.3.6.1.4.1.231.7.1.2.1.1.4.3.5.1.1
Type of the equipment holder.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20EqhType  

xldv20EqhAccPiuTypes 1.3.6.1.4.1.231.7.1.2.1.1.4.3.5.1.2
Accepted PIU Types of this slot. This attribute identifies the types of Plug-In Units to be supported by this slot. They are separated by newline characters. That means 'CR LF'. This attribute only supplies if the Equipment holder instance represents a slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..200)  

xldv20EqhSlotStatus 1.3.6.1.4.1.231.7.1.2.1.1.4.3.5.1.3
Indicates whether a slot is empty or used. This attribute only supplies if the Equipment holder instance represents a slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20SlotStatus  

xldv20EqhSwVersion 1.3.6.1.4.1.231.7.1.2.1.1.4.3.5.1.4
Identifies the software load of this PIU. This attribute identifies the software load, if there is any, which is currently designated as the one to be loaded to the plug-in-unit whenever an automatic reload of software is needed. This attribute only applies if the equipment holder instance represents a slot. Default value for not loadable units is .
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..10)  

xldv20EqhMnemoCode 1.3.6.1.4.1.231.7.1.2.1.1.4.3.5.1.5
The mnemo code used to retrieve the SW loadfile for the plug-in unit. Default value for not loadable units is .
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..19)  

xldv20EqhFwCode 1.3.6.1.4.1.231.7.1.2.1.1.4.3.5.1.6
The FW code used to retrieve the SW loadfile for the plug-in unit. Default value for not loadable units is .
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..10)  

xldv20EqhRiMnemoCode 1.3.6.1.4.1.231.7.1.2.1.1.4.3.5.1.7
This attribute specifies the mnemo code of the currently plugged PIU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

xldv20EqhRiFwItemNumber 1.3.6.1.4.1.231.7.1.2.1.1.4.3.5.1.8
This attribute specifies the FW item number of the currently plugged PIU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

xldv20EqhRiFwIssue 1.3.6.1.4.1.231.7.1.2.1.1.4.3.5.1.9
This attribute specifies the FW item issue of the currently plugged PIU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

xldv20EqhRiHwItemNumber 1.3.6.1.4.1.231.7.1.2.1.1.4.3.5.1.10
This attribute specifies the HW item number of the currently plugged PIU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

xldv20EqhRiHwIssue 1.3.6.1.4.1.231.7.1.2.1.1.4.3.5.1.11
This attribute specifies the HW item issue of the currently plugged PIU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

xldv20EqhRiSerialNumber 1.3.6.1.4.1.231.7.1.2.1.1.4.3.5.1.12
This attribute specifies the Serial Number of the currently plugged PIU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

xldv20HwPlugInUnitTable 1.3.6.1.4.1.231.7.1.2.1.1.4.3.6
Table containing the plug-in unit entries .
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xldv20HwPlugInUnitEntry

xldv20HwPlugInUnitEntry 1.3.6.1.4.1.231.7.1.2.1.1.4.3.6.1
Entry of plug in unit table. Each entry is used to represent equipment that is inserted (plugged into) and removed from slots of the ATM NE . Notifications : xldv20TrStateChangeOper. xldv20TrStateChangeAdmin. xldv20TrTrObjCreate. xldv20TrObjDelete. Alarm traps when a fault has been detected or cleared.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20HwPlugInUnitEntry  

xldv20PiuAdminState 1.3.6.1.4.1.231.7.1.2.1.1.4.3.6.1.1
This attribute is used to activate (unlock) and deactivate (lock) the functions performed by the plug-in unit. Default is locked except for LU155:OM, LU155:OL, LUPON:O, LUDSX3:C. For LU155:OM, LU155:OL, LUPON:O, LUDSX3:C locking is only allowed from LCT. In the transition from lock to unlock the Plug-In Unit is diagnosed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20AdminState  

xldv20PiuAvailStatus 1.3.6.1.4.1.231.7.1.2.1.1.4.3.6.1.2
The availability status of a plug-in unit is described with this attribute.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20AvailStatus  

xldv20PiuOperState 1.3.6.1.4.1.231.7.1.2.1.1.4.3.6.1.3
The operational state of plug in unit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20OperState  

xldv20PiuType 1.3.6.1.4.1.231.7.1.2.1.1.4.3.6.1.4
Identifier for the type of a plug-in unit. See description of xldv20EqhAccPiuTypes for possible string values.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

xldv20PiuAlarmSeverityIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.3.6.1.5
It is a pointer to the instance of the alarm severity assignment profile managed entity that contains the severity assignments for the alarms reported by this managed entity. Default is 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20AlmSevProfileIndex  

xldv20PiuAlarmFilteringIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.3.6.1.6
It is a pointer to the instance of the alarm filtering assignment profile managed entity that contains the filtering assignments for the alarms reported by this managed entity. (Not implemented yet) .
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20AlmFiltProfileIndex  

xldv20PiuUpgradeResult 1.3.6.1.4.1.231.7.1.2.1.1.4.3.6.1.7
Informs about the status of the SW upgrade task during loading and the result at the end of loading the current plug-in unit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ControlReq  

xldv20HwuControl 1.3.6.1.4.1.231.7.1.2.1.1.4.3.7
OBJECT IDENTIFIER    

xldv20HwuControlReq 1.3.6.1.4.1.231.7.1.2.1.1.4.3.7.1
This attribute identifies the control command for creating or deleting a HW unit. Notifications : xldv20TrHwuControl when command is finished.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20ControlReq  

xldv20HwuControlStatus 1.3.6.1.4.1.231.7.1.2.1.1.4.3.7.2
The status of a control request.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ControlStatus  

xldv20HwuUnitType 1.3.6.1.4.1.231.7.1.2.1.1.4.3.7.3
Identifies the type of hardware unit which should be created. The values are equipment, equipmentHolder and plugInUnit . The following entities can not be created: atmNe. equipment (DSLAM). equipmentHolder (basic shelf). equipmentHolder (slot1-slot32 of basic shelf).
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20HwUnitType  

xldv20HwuEquType 1.3.6.1.4.1.231.7.1.2.1.1.4.3.7.4
Indicates the equipment which should be created (ntAdsl or ntVdsl or ntCpe). Default is .
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..21)  

xldv20HwuEqhType 1.3.6.1.4.1.231.7.1.2.1.1.4.3.7.5
Indicates the equipmentHolder which should be created (extendedShelf or ntAdslShelf or ntVdslShelf) .
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20EqhType  

xldv20HwuPiuType 1.3.6.1.4.1.231.7.1.2.1.1.4.3.7.6
Identifies the type of a plug-in unit which should be created. The following entities cannot be created or deleted : LU*, and CI . Default is .
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..200)  

xldv20HwuContainingUnitIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.3.7.7
Identifies the managed entity which contains the created unit .
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned16  

xldv20HwuContainedUnitAddr 1.3.6.1.4.1.231.7.1.2.1.1.4.3.7.8
Identifies the index of the contained unit, which should be created, within the containing unit .
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..512  

xldv20HwuUnitIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.3.7.9
Identifies the HW Unit which should be deleted .
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned16  

xldv20HwuControlTimer 1.3.6.1.4.1.231.7.1.2.1.1.4.3.7.10
The maximum wait time for the manager when a create or delete HW unit request cannot be executed immediately ( value commExecStarted in GetResponse for xldv20HwuControlReq ).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32  

xldv20HwuControlReqResult 1.3.6.1.4.1.231.7.1.2.1.1.4.3.7.11
The result of the last user command.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ControlReq  

xldv20HwuControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.1.4.3.7.12
The time stamp of the last command (end of command).
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

xldv20RemoteInventory 1.3.6.1.4.1.231.7.1.2.1.1.4.3.9
OBJECT IDENTIFIER    

xldv20RiControlReq 1.3.6.1.4.1.231.7.1.2.1.1.4.3.9.1
Feature not supported. This attribute identifies the control commands to get information about the boards currently plugged into the XLD system. On a request from TMN-OS or LCT, the Product Identification Data (PID) and location data (rack, row, slot) of either a single board or of all boards plugged are collected. These data are sent to to a file at the FTP server. Notifications : xldv20TrRemInvReady when the remote inventory data have been collected and the resulting file has been sent to the FTP server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20ControlReq  

xldv20RiControlStatus 1.3.6.1.4.1.231.7.1.2.1.1.4.3.9.2
The status of a control request.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ControlStatus  

xldv20RiControlTimer 1.3.6.1.4.1.231.7.1.2.1.1.4.3.9.3
The maximum wait time for the manager when remote inventory data retrieve request cannot be executed immediately (value commExecStarted in the result attribute xldv20RiControlReqResult). The manager reads this value from the DSLAM. The end of request indicates the trap xldv20TrRemInvReady .
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32  

xldv20RiResultFilePath 1.3.6.1.4.1.231.7.1.2.1.1.4.3.9.4
The destination path where the file containing the remote inventory data should be stored on the FTP server. If this attribute does not contain a valid path name no remote inventory data will be transmitted .
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..200)  

xldv20RiHwUnitIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.3.9.5
The HwUnitIndex of the requested board. if remote inventory data for a single board are requested.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned16  

xldv20RiControlReqResult 1.3.6.1.4.1.231.7.1.2.1.1.4.3.9.6
The result of the last user command.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ControlReq  

xldv20RiControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.1.4.3.9.7
The time stamp of the last command (end of command).
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

xldv20HwUnitMappingTable 1.3.6.1.4.1.231.7.1.2.1.1.4.3.10
The table maps hardware units ('HwUnitIndex') to TLM interfaces ('IfIndex') accociated to this hardware.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xldv20HwUnitMappingEntry

xldv20HwUnitMappingEntry 1.3.6.1.4.1.231.7.1.2.1.1.4.3.10.1
An entry of the xldv20HwUnitMappingTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20HwUnitMappingEntry  

xldv20HwmHwUnitIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.3.10.1.1
The 'HwUnitIndex' of the selected hardware unit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned16  

xldv20HwmIfIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.3.10.1.2
The 'IfIndex' of a TLM interface on the selected hardware unit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned16  

xldv20IfTable 1.3.6.1.4.1.231.7.1.2.1.1.4.4.1
The TLM interface table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xldv20IfEntry

xldv20IfEntry 1.3.6.1.4.1.231.7.1.2.1.1.4.4.1.1
An entry in the TLM interface table. Each entry represents either a physical path termination point (PPTP) or a TC adaptor (tcAdaptor). Notifications : alarm traps when a fault has been detected or cleared. xldv20TrStateChangeOper. xldv20TrStateChangeAdmin.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20IfEntry  

xldv20IfIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.4.1.1.1
Index of the table. Identifier of a TLM interface .
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned16  

xldv20IfType 1.3.6.1.4.1.231.7.1.2.1.1.4.4.1.1.2
The type of a TLM interface. Supported interface types : s1n, s1f. adc, adr. ibm, eth. s3n, s3f. d3n, d3f. e3n, e3f. e1nIma, e1fIma. d1nIma, d1fIma. sdc, sdr. atmIma (IMA group). tca. In XLDV20 unused : pon. vdc. vdr. d1nIma. d1fIma.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20IfType  

xldv20IfLineIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.4.1.1.3
A unique value to identify interfaces belonging to the same line.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned16  

xldv20IfHwUnitIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.4.1.1.4
The index to identify the hardware unit the physical path/TC layer terminates on.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned16  

xldv20IfHwPortId 1.3.6.1.4.1.231.7.1.2.1.1.4.4.1.1.5
For PPTP it is the associated HW port ID. For TC adaptor it is the IfIndex of the PPTP the TC adaptor is connected to.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

xldv20IfConnectivityIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.4.1.1.6
For PPTP it is the associated HW port ID. For TC adaptor it is the IfIndex of the PPTP the TC adaptor is connected to.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned16  

xldv20IfOperState 1.3.6.1.4.1.231.7.1.2.1.1.4.4.1.1.7
The operational state of this unit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20OperState  

xldv20IfAdminState 1.3.6.1.4.1.231.7.1.2.1.1.4.4.1.1.8
Activates(unlock) or deactivates(lock) the functionality of this managed entity. It must be locked before physical looptest has been started. The attribute is not configurable during looptest. The PPTP of type s1f, s3f, e3f, d3f, e1nIma, e1fIma, d1nIma, d1fIma and atmIma and the associated tcAdaptors can only be locked from a connected LCT.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20AdminState  

xldv20IfAlarmState 1.3.6.1.4.1.231.7.1.2.1.1.4.4.1.1.9
The nature of an alarm at a TLM interface. Values correspond to alarm trap ID`s. Default is noAlarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20AlarmState  

xldv20IfAlarmSeverityIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.4.1.1.10
The index of the associated entry in the alarm severity profile table. These entries contain the severity assigments for the alarms reported by this managed entity. The range of values is: 1,.., 10: for possible pre-configured alarm severity profiles . Default is profile 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20AlmSevProfileIndex  

xldv20IfAlarmFilteringIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.4.1.1.11
It is a pointer to the instance of the alarm filtering assignment profile managed entity that contains the filtering assignments for the alarms reported by this managed entity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20AlmFiltProfileIndex  

xldv20AdcControl 1.3.6.1.4.1.231.7.1.2.1.1.4.4.2
OBJECT IDENTIFIER    

xldv20AdcCtrlControlReq 1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.1
ADSL control request object to activate a configured set of data (command: activateData), which includes minimum and maximum bandwidth in upstream and downstream direction, latency and margin.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20ControlReq  

xldv20AdcCtrlControlStatus 1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.2
The status of a control request.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ControlStatus  

xldv20AdcCtrlIfIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.3
It is the relevant interface index of the ADSL central PPTP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned16  

xldv20AdcCtrlMinRateDn 1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.4
Desired lower limit of downstream data rate. The data rate ranges from 32 to 8096 Kbit/sec and is splitted into units of 32 Kbit/sec. This corresponds to a cell rate between 75 and 19094 cells/sec. Default is 1 (32 kbps/75 cps).
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20AdslDataRateDown  

xldv20AdcCtrlMinRateUp 1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.5
Desired lower limit of upstream data rate. The data rate ranges from 32 to 768 Kbit/sec and is splitted into units of 32 Kbit/sec. This corresponds to a cell rate between 75 and 1811 cells/sec. Default is 1 (32 kbps/75 cps).
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20AdslDataRateUp  

xldv20AdcCtrlMaxRateDn 1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.6
Desired upper limit of downstream data rate. The data rate ranges from 32 and 8096 Kbit/sec and is splitted into units of 32 Kbit/sec. This corresponds to a cell rate between 75 and 19094 cells/sec. Default is 253 (8096 kbps/19094 cps).
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20AdslDataRateDown  

xldv20AdcCtrlMaxRateUp 1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.7
Desired upper limit of upstream data rate. The data rate ranges from 32 and 768 Kbit/sec and is splitted into units of 32 Kbit/sec. This corresponds to a cell rate between 75 and 1811 cells/sec. Default is 24 (768 kbps/1811 cps).
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20AdslDataRateUp  

xldv20AdcCtrlMarginDn 1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.8
Desired downstream margin in units of dB.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..15  

xldv20AdcCtrlMarginUp 1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.9
Desired upstream margin in units of dB .
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..15  

xldv20AdcCtrlLatencyDn 1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.10
Selects fast mode or interleaved mode downstream. 0 = interleavedLow (default). 1 = interleavedHigh . 256 = fast mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20Latency  

xldv20AdcCtrlLatencyUp 1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.11
Selects fast mode or interleaved mode upstream. 0 = interleavedLow (default). 1 = interleavedHigh . 256 = fast mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20Latency  

xldv20AdcCtrlMinMarginDn 1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.12
Threshold for downstream margin when an alarm should be sent. In units of dB. The value auto is the default value and means that the threshold is calculated from the configured margin : threshold margin down = configured margin down - 6 dB.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20AdslMinMargin  

xldv20AdcCtrlMinMarginUp 1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.13
Threshold for upstream margin when an alarm should be sent. In units of dB. The value auto is the default value and means that the threshold is calculated from the configured margin : threshold margin up = configured margin up - 6 dB.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20AdslMinMargin  

xldv20AdcCtrlControlReqResult 1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.14
The result of the last user command.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ControlReq  

xldv20AdcCtrlXdslServiceType 1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.15
The service mode for the DSL line according to ITU norm. Supported modes are : - gDotHsMode (handshake mode) for automatic link up either to ADSL equipment . or to UDSL equipment (G9941). - or ansiT1Dot413 for ADSL equipment (fullRateMode, ITU G9921). - or gDotLiteMode for UDSL equipment (uawgMode, ITU G9922). - or gDotAll to allow any NT/CPE service type (is determined by the central modem) .
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20XdslServiceType  

xldv20AdcCtrlControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.16
The time stamp of the last command (end of command).
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

xldv20AdcCtrlTrainingMode 1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.17
Selects between different training modes for ADSL modems.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20AdcTrainingMode  

xldv20VdcControl 1.3.6.1.4.1.231.7.1.2.1.1.4.4.3
OBJECT IDENTIFIER    

xldv20VdcCtrlControlReq 1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.1
Feature not supported. This attribute marks the command to activate a configured set of (command: activateData), which includes minimum and maximum bandwidth in upstream and downstream direction, latency and some additional modem parameters (power boost, warmstart, VDSL mode, Sleep mode, PSD mask, power adaptation).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20ControlReq  

xldv20VdcCtrlControlStatus 1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.2
This attribute indicates the status of a control request. requestIdle, requestBusy, requestPassed, requestFailed .
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20ControlStatus  

xldv20VdcCtrlIfIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.3
It is the relevant interface index of the VDSL-C PPTP.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Unsigned16  

xldv20VdcCtrlMinRateDn 1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.4
The desired lower limit of the downstream data rate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20VdcRateDn  

xldv20VdcCtrlMinRateUp 1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.5
The desired lower limit of the upstream data rate.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20VdcRateUp  

xldv20VdcCtrlMaxRateDn 1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.6
The upper limit of the downstream data rate.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20VdcRateDn  

xldv20VdcCtrlMaxRateUp 1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.7
The upper limit of the upstream data rate.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20VdcRateUp  

xldv20VdcCtrlLatencyDn 1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.8
Selects interleave depth (i.e. latency time) used for error correction in downstream direction.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20VdcLatencyDn  

xldv20VdcCtrlLatencyUp 1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.9
Selects interleave depth (i.e. latency time) used for error correction in upstream direction.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20VdcLatencyUp  

xldv20VdcCtrlPowerBoost 1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.10
Configured power boost mode.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20VdcPowerBoostAdaptationType  

xldv20VdcCtrlWarmStart 1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.11
Configured warmstart option.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20OperState  

xldv20VdcCtrlVdslMode 1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.12
Configured VDSL mode option.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20VdcVdslMode  

xldv20VdcCtrlSleepMode 1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.13
Configured sleep mode option.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20OperState  

xldv20VdcCtrlPsdMask 1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.14
Configured PSD mask option (electro-magnetic interference effects, M1 for strong and M2 for weak effects).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20VdcPsdMask  

xldv20VdcCtrlPowerAdaptation 1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.15
Configured power adaptation option.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20VdcPowerBoostAdaptationType  

xldv20VdcCtrlControlReqResult 1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.16
This read-only attribute informs about the result of the last user command.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20ControlReq  

xldv20VdcCtrlControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.17
This read-only attribute informs about the time stamp of the last command (end of command).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TimeTicks  

xldv20AdcPPTPTable 1.3.6.1.4.1.231.7.1.2.1.1.4.4.4
The physical path termination point table for ADSL Central interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xldv20AdcPPTPEntry

xldv20AdcPPTPEntry 1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1
An entry describing a termination point in the PPTP table. Notifications : see xldv20IfEntry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20AdcPPTPEntry  

xldv20AdcMinRateDnCfg 1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.1
The desired lower value of the downstream data rate. The data rate ranges from 32 to 8096 Kbit/sec and is splitted into units of 32 Kbit/sec. This corresponds to a cell rate between 75 and 19094 cells/sec. Default is 1 (32 kbps/75 cps).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20AdslDataRateDown  

xldv20AdcMinRateUpCfg 1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.2
The desired lower value of the upstream data rate. The data rate ranges from 32 and 768 Kbit/sec and is splitted into units of 32 Kbit/sec. This corresponds to a cell rate between 75 and 1811 cells/sec. Default is 1 (32 kbps/75 cps).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20AdslDataRateUp  

xldv20AdcMaxRateDnCfg 1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.3
The desired upper value of the downstream data rate. The data rate ranges from 32 and 8160 Kbit/sec and is splitted into units of 32 Kbit/sec. This corresponds to a cell rate between 75 and 1811 cells/sec. Default is 253 (8096 kbps/19094 cps).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20AdslDataRateDown  

xldv20AdcMaxRateUpCfg 1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.4
The desired upper value of the upstream data rate. The data rate ranges from 32 and 768 Kbit/sec and is splitted into units of 32 Kbit/sec. This corresponds to a cell rate between 75 and 1811 cells/sec. Default is 24 (768 kbps/1811 cps).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20AdslDataRateUp  

xldv20AdcMarginDnCfg 1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.5
Desired downstream margin. The unit of measurement is dB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..15  

xldv20AdcMarginUpCfg 1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.6
Desired upstream margin. The unit of measurement is dB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..15  

xldv20AdcMinMarginDnCfg 1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.7
Desired threshold for downstream margin in units of dB. If the value auto is selected during configuration the threshold is calculated from the configured margin : threshold margin down = configured margin down - 6 dB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20AdslMinMargin  

xldv20AdcMinMarginUpCfg 1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.8
Desired threshold for upstream margin in units of dB. If the value auto is selected during configuration the threshold is calculated from the configured margin : threshold margin up = configured margin up - 6 dB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20AdslMinMargin  

xldv20AdcLatencyDnCfg 1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.10
The configured fast mode or interleaved mode downstream. 0 = interleavedLow (default). 1 = interleavedHigh . 256 = fast mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20Latency  

xldv20AdcLatencyUpCfg 1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.11
The configured fast mode or interleaved mode upstream. 0 = interleavedLow (default). 1 = interleavedHigh . 256 = fast mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20Latency  

xldv20AdcRateDn 1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.12
The current downstream data rate. The data rate ranges from 32 and 8096 Kbit/sec and is splitted into units of 32 Kbit/sec. This corresponds to a cell rate between 75 and 19094 cells/sec. Default is rateInvalid (32767).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20AdslDataRateDownCurrent  

xldv20AdcRateUp 1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.13
The current upstream data rate. The data rate ranges from 32 and 768 kbit/sec and is splitted into units of 32 Kbit/sec. This corresponds to a cell rate between 75 and 1811 cells/sec. Default is rateInvalid (32767).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20AdslDataRateUpCurrent  

xldv20AdcMarginDn 1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.14
The current downstream margin in units of dB. Default is marginInvalid.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20AdslMargin  

xldv20AdcMarginUp 1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.15
The current upstream margin in units of dB. Default is marginInvalid.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20AdslMargin  

xldv20AdcAttenuationDn 1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.16
The current downstream attenuation in steps of 0,5 dB. Default is attenuationInvalid .
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20AdslAttenuation  

xldv20AdcAttenuationUp 1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.17
The current upstream attenuation in steps of 0,5 dB. Default is attenuationInvalid .
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20AdslAttenuation  

xldv20AdcLinkState 1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.18
The attribute reflects upon the internal states of the Central Office Modem.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20LinkState  

xldv20AdcAISOnLOS 1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.19
Enables or disables the VP-AIS generation after defect LOS.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20OperState  

xldv20AdcAISOnACT 1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.20
Enables or disables the VP-AIS generation after link activation fault.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20OperState  

xldv20AdcGuaranteedBandwidthUsage 1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.21
Garanteed bandwidth in percent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..100  

xldv20AdcXdslServiceTypeCfg 1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.22
The configured service mode for XDSL line.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20XdslServiceType  

xldv20AdcInitStatus 1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.23
The initialization status field of an ADSL line. Describes the initalization error in case of an activation problem on an ADSL line .
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20XdslInitStatus  

xldv20AdcTransceiverOutputPower 1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.24
The ADSL tranceiver output power. Granularity 1.0 dBm. Default value is outputPowerInvalid.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20AdslOutputPower  

xldv20AdcFirstUsedSubCarrierUpstream 1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.25
The first used sub carrier in upstream direction. Default value is 64 (unknown).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..64  

xldv20AdcFirstUsedSubCarrierDownstream 1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.26
The first used sub carrier in downstream direction. Default value is 256 (unknown).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..256  

xldv20AdcLastUsedSubCarrierUpstream 1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.27
The last used sub carrier in upstream direction. Default value is 64 (unknown).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..64  

xldv20AdcLastUsedSubCarrierDownstream 1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.28
The last used sub carrier in downstream direction. Default value is 256 (unknown).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..256  

xldv20AdcXdslServiceType 1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.29
The current service type resulting from the configured service type. It depends on the actual hardware. Configuring gDotHsMode can result either in gDotLiteMode or gDotDmtMode. gDotAll can result in gDotDmtMode, ansiT1dot413 or gDotLiteMode. Default value is serviceTypeUnknown (10).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20XdslServiceTypeCurrent  

xldv20VdcPPTPTable 1.3.6.1.4.1.231.7.1.2.1.1.4.4.5
Feature not supported. The physical path termination point table for VDSL C.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xldv20VdcPPTPEntry

xldv20VdcPPTPEntry 1.3.6.1.4.1.231.7.1.2.1.1.4.4.5.1
An entry describing a termination point in the PPTP table. Notifications : see xldv20IfEntry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20VdcPPTPEntry  

xldv20VdcMinRateDnCfg 1.3.6.1.4.1.231.7.1.2.1.1.4.4.5.1.1
The lower limit of the downstream data rate.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20VdcRateDn  

xldv20VdcMinRateUpCfg 1.3.6.1.4.1.231.7.1.2.1.1.4.4.5.1.2
The lower limit of the upstream data rate.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20VdcRateUp  

xldv20VdcMaxRateDnCfg 1.3.6.1.4.1.231.7.1.2.1.1.4.4.5.1.3
The upper limit of the downstream data rate.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20VdcRateDn  

xldv20VdcMaxRateUpCfg 1.3.6.1.4.1.231.7.1.2.1.1.4.4.5.1.4
The upper limit of the upstream data rate.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20VdcRateUp  

xldv20VdcLatencyDnCfg 1.3.6.1.4.1.231.7.1.2.1.1.4.4.5.1.5
Desired interleave depth (i.e. latency time) used for error correction in downstream direction.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20VdcLatencyDn  

xldv20VdcLatencyUpCfg 1.3.6.1.4.1.231.7.1.2.1.1.4.4.5.1.6
Desired interleave depth (i.e. latency time) used for error correction in upstream direction.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20VdcLatencyUp  

xldv20VdcPowerBoostCfg 1.3.6.1.4.1.231.7.1.2.1.1.4.4.5.1.7
Desired power boost mode.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20VdcPowerBoostAdaptationType  

xldv20VdcWarmStartCfg 1.3.6.1.4.1.231.7.1.2.1.1.4.4.5.1.8
Configured warmstart option.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20OperState  

xldv20VdcVdslModeCfg 1.3.6.1.4.1.231.7.1.2.1.1.4.4.5.1.9
Configured VDSL mode option.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20VdcVdslMode  

xldv20VdcSleepModeCfg 1.3.6.1.4.1.231.7.1.2.1.1.4.4.5.1.10
Desired sleep mode option.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20OperState  

xldv20VdcPsdMaskCfg 1.3.6.1.4.1.231.7.1.2.1.1.4.4.5.1.11
Desired PSD mask option (electro-magnetic interference effects, M1 for strong and M2 for weak effects).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20VdcPsdMask  

xldv20VdcPowerAdaptationCfg 1.3.6.1.4.1.231.7.1.2.1.1.4.4.5.1.12
Desired power adaptation option.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20VdcPowerBoostAdaptationType  

xldv20VdcRateDn 1.3.6.1.4.1.231.7.1.2.1.1.4.4.5.1.13
The current downstream data rate.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20VdcRateDn  

xldv20VdcRateUp 1.3.6.1.4.1.231.7.1.2.1.1.4.4.5.1.14
The current upstream data rate.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20VdcRateUp  

xldv20VdcMarginDn 1.3.6.1.4.1.231.7.1.2.1.1.4.4.5.1.15
The current downstream margin in units of dB.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32  

xldv20VdcMarginUp 1.3.6.1.4.1.231.7.1.2.1.1.4.4.5.1.16
The current upstream margin in units of dB.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32  

xldv20VdcAttenuationDn 1.3.6.1.4.1.231.7.1.2.1.1.4.4.5.1.17
The current downstream attenuation in units of dB.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32  

xldv20VdcAttenuationUp 1.3.6.1.4.1.231.7.1.2.1.1.4.4.5.1.18
The current upstream attenuation in units of dB.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32  

xldv20VdcLinkState 1.3.6.1.4.1.231.7.1.2.1.1.4.4.5.1.19
Current internal states of the Central Office VDSL Modem.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20LinkState  

xldv20VdcGuaranteedBandwidthUsage 1.3.6.1.4.1.231.7.1.2.1.1.4.4.5.1.20
used bandwidth in percent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..100  

xldv20IbmPPTPTable 1.3.6.1.4.1.231.7.1.2.1.1.4.4.6
The physical path termination point table for the IBM IF.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xldv20IbmPPTPEntry

xldv20IbmPPTPEntry 1.3.6.1.4.1.231.7.1.2.1.1.4.4.6.1
An entry describing a termination point in the IbmPPTP table. Notifications : see xldv20IfEntry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20IbmPPTPEntry  

xldv20IbmAISOnLOS 1.3.6.1.4.1.231.7.1.2.1.1.4.4.6.1.1
To enable/disable (default) the VP-AIS generation on defect LOS.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20OperState  

xldv20IbmVpAISFiltering 1.3.6.1.4.1.231.7.1.2.1.1.4.4.6.1.2
To enable or disable (default) the VP-AIS cell filtering function in the NT. In case of enable no VP-AIS cells are passed to the subscriber.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20OperState  

xldv20Ds3NePPTPTable 1.3.6.1.4.1.231.7.1.2.1.1.4.4.7
The near end physical path termination point table for the DS3 interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xldv20Ds3NePPTPEntry

xldv20Ds3NePPTPEntry 1.3.6.1.4.1.231.7.1.2.1.1.4.4.7.1
An entry describing a termination point in the PPTP table. Notifications : see xldv20IfEntry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20Ds3NePPTPEntry  

xldv20D3nType 1.3.6.1.4.1.231.7.1.2.1.1.4.4.7.1.1
The interface type of the line used for transmission.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20LineType  

xldv20D3nCodingType 1.3.6.1.4.1.231.7.1.2.1.1.4.4.7.1.2
The coding type of the line used for transmission. Value: dsx3B3ZS .
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20CodingType  

xldv20D3nPayloadScramblingActivate 1.3.6.1.4.1.231.7.1.2.1.1.4.4.7.1.3
Enables (default) / disables the payload scrambling .
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20OperState  

xldv20D3nEmptyCellType 1.3.6.1.4.1.231.7.1.2.1.1.4.4.7.1.4
The type of empty cells.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20EmptyCellType  

xldv20D3nBandwidthUsage 1.3.6.1.4.1.231.7.1.2.1.1.4.4.7.1.5
Used bandwidth in percent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..100  

xldv20E3NePPTPTable 1.3.6.1.4.1.231.7.1.2.1.1.4.4.8
The physical path termination point table for the E3 IF.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xldv20E3NePPTPEntry

xldv20E3NePPTPEntry 1.3.6.1.4.1.231.7.1.2.1.1.4.4.8.1
An entry describing a termination point in the PPTP table. Notifications : see xldv20IfEntry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20E3NePPTPEntry  

xldv20E3nType 1.3.6.1.4.1.231.7.1.2.1.1.4.4.8.1.1
The interface type of the line used for transmission.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20LineType  

xldv20E3nCodingType 1.3.6.1.4.1.231.7.1.2.1.1.4.4.8.1.2
The coding type of the line used for transmission.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20CodingType  

xldv20E3nTrailTraceSend 1.3.6.1.4.1.231.7.1.2.1.1.4.4.8.1.3
The pattern to be sent to LE for the trail trace send functionality.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

xldv20E3nTrailTraceSendDefault 1.3.6.1.4.1.231.7.1.2.1.1.4.4.8.1.4
To configure the trail trace send functionality. A default trace value (enabled) or the pattern defined in the xldv20E3nTrailTraceSend attribute (disabled) will be sent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20OperState  

xldv20E3nTrailTraceExpect 1.3.6.1.4.1.231.7.1.2.1.1.4.4.8.1.5
The expected pattern. It will be compared with the value of the E3nTrailTraceReceive attribute provided that the attribute E3nTrailTraceTIMDetection is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

xldv20E3nTrailTraceTIMDetectionActivate 1.3.6.1.4.1.231.7.1.2.1.1.4.4.8.1.6
Enables / disables (default) signal comparison of the signals E3nTrailTraceExpect and E3nTrailTraceReceive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20OperState  

xldv20E3nTrailTraceReceive 1.3.6.1.4.1.231.7.1.2.1.1.4.4.8.1.7
The received trail trace value from the LE.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

xldv20E3nEmptyCellType 1.3.6.1.4.1.231.7.1.2.1.1.4.4.8.1.8
Type of empty cells.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20EmptyCellType  

xldv20E3nPayloadType 1.3.6.1.4.1.231.7.1.2.1.1.4.4.8.1.9
The received payload type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20E3nPayloadType  

xldv20E3nBandwidthUsage 1.3.6.1.4.1.231.7.1.2.1.1.4.4.8.1.10
Used bandwidth in percent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..100  

xldv20Stm1NePPTPTable 1.3.6.1.4.1.231.7.1.2.1.1.4.4.9
The physical path termination point table for the STM1 IF.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xldv20Stm1NePPTPEntry

xldv20Stm1NePPTPEntry 1.3.6.1.4.1.231.7.1.2.1.1.4.4.9.1
An entry describing a termination point in the PPTP table. Notifications : see xldv20IfEntry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20Stm1NePPTPEntry  

xldv20S1nLineType 1.3.6.1.4.1.231.7.1.2.1.1.4.4.9.1.1
The physical medium of the line used for transmission.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20LineType  

xldv20S1nPathTraceSend 1.3.6.1.4.1.231.7.1.2.1.1.4.4.9.1.2
Pattern to be sent to the LE (CRC + 15 bytes) used for the path trace send functionality.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

xldv20S1nPathTraceSendDefault 1.3.6.1.4.1.231.7.1.2.1.1.4.4.9.1.3
To configure the path trace send functionality. A default path trace value (enabled) or the pattern defined in the xldv20S1nPathTraceSend attribute (disabled) will be sent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20OperState  

xldv20S1nPathTraceExpect 1.3.6.1.4.1.231.7.1.2.1.1.4.4.9.1.4
The expected result of a path trace operation. This signal will be compared with the S1nPathTraceReceive, when the Attribute S1nPathTraceTIMDetectionActivate is enabled. If the comparison detects unequality an alarm notification (TIM) is sent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

xldv20S1nPathTraceTIMDetectionActivate 1.3.6.1.4.1.231.7.1.2.1.1.4.4.9.1.5
Enables / disables (default) the comparison of xldv20S1nPathTraceExpect and xldv20S1nPathTraceReceive attribute.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20OperState  

xldv20S1nPathTraceReceive 1.3.6.1.4.1.231.7.1.2.1.1.4.4.9.1.6
Received path trace value from the LE.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

xldv20S1nHpEberThreshold 1.3.6.1.4.1.231.7.1.2.1.1.4.4.9.1.7
The threshold for the higher-order path excessive bit error check.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20S1nS3nEberThreshold  

xldv20S1nMsEberThreshold 1.3.6.1.4.1.231.7.1.2.1.1.4.4.9.1.8
The threshold for the multiplexer section excessive bit error check.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20S1nS3nEberThreshold  

xldv20S1nRsEberThreshold 1.3.6.1.4.1.231.7.1.2.1.1.4.4.9.1.9
The threshold for the repeater section excessive bit error check.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20S1nS3nEberThreshold  

xldv20S1nSDThreshold 1.3.6.1.4.1.231.7.1.2.1.1.4.4.9.1.10
The threshold for the signal degration check.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20S1nS3nSDThreshold  

xldv20S1nRDIAISOnEber 1.3.6.1.4.1.231.7.1.2.1.1.4.4.9.1.11
Enables (default) / disables the RDI-and VP-AIS generation on defect excessive bit ratio.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20OperState  

xldv20S1nSignalLabelReceive 1.3.6.1.4.1.231.7.1.2.1.1.4.4.9.1.12
Received signal label from the LE.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Integer32  

xldv20S1nEmptyCellType 1.3.6.1.4.1.231.7.1.2.1.1.4.4.9.1.13
The type of empty cells.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20EmptyCellType  

xldv20S1nBandwidthUsage 1.3.6.1.4.1.231.7.1.2.1.1.4.4.9.1.14
Used bandwidth in percent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..100  

xldv20Sts3NePPTPTable 1.3.6.1.4.1.231.7.1.2.1.1.4.4.10
The physical path termination point table for the STS3c IF.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xldv20Sts3NePPTPEntry

xldv20Sts3NePPTPEntry 1.3.6.1.4.1.231.7.1.2.1.1.4.4.10.1
An entry describing a termination point in the PPTP table. Notifications : see xldv20IfEntry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20Sts3NePPTPEntry  

xldv20S3nLineType 1.3.6.1.4.1.231.7.1.2.1.1.4.4.10.1.1
The physical medium of the line used for transmission.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20LineType  

xldv20S3nPathTraceSend 1.3.6.1.4.1.231.7.1.2.1.1.4.4.10.1.2
The input signal used for the path trace send functionality.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

xldv20S3nPathTraceSendDefault 1.3.6.1.4.1.231.7.1.2.1.1.4.4.10.1.3
Enables/disables the path trace send functionality. A default path trace value (enabled) or the pattern defined in the xldv20S3nPathTraceSend attribute (disabled) will be sent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20OperState  

xldv20S3nPathTraceExpect 1.3.6.1.4.1.231.7.1.2.1.1.4.4.10.1.4
The expected result of a path trace operation. This signal will be compared with the S3nPathTraceReceive, when the attribute S3nPathTraceTIMDetectionActivate is enabled. If the comparison detects unequality an alarm notification (TIM) is sent. When CRC is activated, only the first 15 bytes are compared.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

xldv20S3nPathTraceTIMDetectionActivate 1.3.6.1.4.1.231.7.1.2.1.1.4.4.10.1.5
Enables/disables the comparsion of the signals S3nPathTraceExpect and S3nPathTraceReceive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20OperState  

xldv20S3nPathTraceReceive 1.3.6.1.4.1.231.7.1.2.1.1.4.4.10.1.6
Received path trace value from the LE.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

xldv20S3nPathTraceSync 1.3.6.1.4.1.231.7.1.2.1.1.4.4.10.1.7
Enables/disables the path trace synchronization (the sync-bit generation for the path trace send attribute).
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20OperState  

xldv20S3nPathTraceSendCRCActivate 1.3.6.1.4.1.231.7.1.2.1.1.4.4.10.1.8
Enables/disbales the CRC generation for the path trace send attribute. First Trace Send byte ignored and used for CRC when CRC is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20OperState  

xldv20S3nPathTraceReceiveCRCActivate 1.3.6.1.4.1.231.7.1.2.1.1.4.4.10.1.9
Enables/disables the CRC generation for the path trace reveive attribute.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20OperState  

xldv20S3nHpEberThreshold 1.3.6.1.4.1.231.7.1.2.1.1.4.4.10.1.10
Threshold for the higher-order path excessive bit error check.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20S1nS3nEberThreshold  

xldv20S3nMsEberThreshold 1.3.6.1.4.1.231.7.1.2.1.1.4.4.10.1.11
Threshold for the multiplexer section excessive bit error check.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20S1nS3nEberThreshold  

xldv20S3nRsEberThreshold 1.3.6.1.4.1.231.7.1.2.1.1.4.4.10.1.12
Threshold for the repeater section excessive bit error check.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20S1nS3nEberThreshold  

xldv20S3nSDThreshold 1.3.6.1.4.1.231.7.1.2.1.1.4.4.10.1.13
Threshold for the signal degration check.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20S1nS3nSDThreshold  

xldv20S3nSignalLabelReceive 1.3.6.1.4.1.231.7.1.2.1.1.4.4.10.1.14
Received signal label value from the LE.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Integer32  

xldv20S3nEmptyCellType 1.3.6.1.4.1.231.7.1.2.1.1.4.4.10.1.15
Type of empty cells.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20EmptyCellType  

xldv20S3nBandwidthUsage 1.3.6.1.4.1.231.7.1.2.1.1.4.4.10.1.16
Used bandwidth in percent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..100  

xldv20Dsx1ConfigTable 1.3.6.1.4.1.231.7.1.2.1.1.4.4.11
The DS1 Configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xldv20Dsx1ConfigEntry

xldv20Dsx1ConfigEntry 1.3.6.1.4.1.231.7.1.2.1.1.4.4.11.1
An entry in the DS1 Configuration table (RFC1406) . Index is IfIndex of dsx1nePPTP (e1nIma).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20Dsx1ConfigEntry  

xldv20Dsx1LineType 1.3.6.1.4.1.231.7.1.2.1.1.4.4.11.1.1
This variable indicates the variety of DS1 Line implementing this circuit. The type of circuit affects the number of bits per second that the circuit can reasonably carry, as well as the interpretation of the usage and error statistics. The values, in sequence. dsx1ESF Extended SuperFrame DS1. dsx1D4 AT&T D4 format DS1. dsx1E1 CCITT Recommendation G704 (Table 4a). dsx1E1-CRC CCITT Recommendation G704 (Table 4b). dsxE1-MF G704 (Table 4a) with TS16 multiframing enabled. dsx1E1-CRC-MF G704 (Table 4b) with TS16. multiframing enabled.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), dsx1ESF(2), dsx1D4(3), dsx1E1(4), dsx1E1-CRC(5), dsx1E1-MF(6), dsx1E1-CRC-MF(7)  

xldv20Dsx1LineCoding 1.3.6.1.4.1.231.7.1.2.1.1.4.4.11.1.2
This variable describes the variety of Zero Code Suppression used on the link, which in turn affects a number of its characteristics. dsx1JBZS refers the Jammed Bit Zero Suppres- sion, in which the AT&T specification of at least one pulse every 8 bit periods is literal- ly implemented by forcing a pulse in bit 8 of each channel. Thus, only seven bits per chan- nel, or 1.344 Mbps, is available for data. dsx1B8ZS refers to the use of a specified pat- tern of normal bits and bipolar violations which are used to replace a sequence of eight zero bits. ANSI Clear Channels may use dsx1ZBTSI, or Zero Byte Time Slot Interchange. E1 links, with or without CRC, use dsx1HDB3 or dsx1AMI. dsx1AMI refers to a mode wherein no zero code suppression is present and the line encoding does not solve the problem directly. In this application, the higher layer must provide data which meets or exceeds the pulse density re- quirements, such as inverting HDLC data.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER dsx1JBZS(1), dsx1B8ZS(2), dsx1HDB3(3), dsx1ZBTSI(4), dsx1AMI(5), other(6)  

xldv20Dsx1LoopbackConfig 1.3.6.1.4.1.231.7.1.2.1.1.4.4.11.1.3
This variable represents the loopback confi- guration of the DS1 interface. Agents support- ing read/write access should return badValue in response to a requested loopback state that the interface does not support. The values mean:. dsx1NoLoop Not in the loopback state. A device that is not capable of performing a loopback on the interface shall always return this as it's value. dsx1PayloadLoop The received signal at this interface is looped through the device. Typically the received signal is looped back for re- transmission after it has passed through the device's framing function. dsx1LineLoop The received signal at this interface does not go through the device (minimum pene- tration) but is looped back out. dsx1OtherLoop Loopbacks that are not defined here.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER dsx1NoLoop(1), dsx1PayloadLoop(2), dsx1LineLoop(3), dsx1OtherLoop(4)  

xldv20Dsx1SignalMode 1.3.6.1.4.1.231.7.1.2.1.1.4.4.11.1.4
The signal mode. 'none' indicates that no bits are reserved for signaling on this channel. 'robbedBit' indicates that T1 Robbed Bit Sig- naling is in use. 'bitOriented' indicates that E1 Channel Asso- ciated Signaling is in use. 'messageOriented' indicates that Common Chan- nel Signaling is in use either on channel 16 of an E1 link or channel 24 of a T1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), robbedBit(2), bitOriented(3), messageOriented(4)  

xldv20Dsx1TransmitClockSource 1.3.6.1.4.1.231.7.1.2.1.1.4.4.11.1.5
The source of Transmit Clock. 'loopTiming' indicates that the recovered re- ceive clock is used as the transmit clock. 'localTiming' indicates that a local clock source is used. 'throughTiming' indicates that recovered re- ceive clock from another interface is used as the transmit clock.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER loopTiming(1), localTiming(2), throughTiming(3)  

xldv20Dsx1Fdl 1.3.6.1.4.1.231.7.1.2.1.1.4.4.11.1.6
This bitmap describes the use of the facili- ties data link, and is the sum of the capabili- ties: 'other' indicates that a protocol other than one following is used. 'dsx1Ansi-T1-403' refers to the FDL exchange recommended by ANSI. 'dsx1Att-54016' refers to ESF FDL exchanges. 'dsx1Fdl-none' indicates that the device does not use the FDL.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), dsx1Ansi-T1-403(2), dsx1Att-54016(4), dsx1Fdl-none(8)  

xldv20SdcControl 1.3.6.1.4.1.231.7.1.2.1.1.4.4.12
OBJECT IDENTIFIER    

xldv20SdcCtrlControlReq 1.3.6.1.4.1.231.7.1.2.1.1.4.4.12.1
To activate a configured set of data (command: activateData).
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20ControlReq  

xldv20SdcCtrlControlStatus 1.3.6.1.4.1.231.7.1.2.1.1.4.4.12.2
Indicates the status of a control request.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ControlStatus  

xldv20SdcCtrlIfIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.4.12.3
Index to identify a sdc PPTP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned16  

xldv20SdcCtrlRate 1.3.6.1.4.1.231.7.1.2.1.1.4.4.12.4
Desired SDSL data rate. The supported line rates ranges from 160 and 2320 Kbit/sec. The cell rate range is between 377 and 5471 cells/sec. Default is 5 ( 160 kbps/377cps).
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20SdslDataRate  

xldv20SdcCtrlXdslServiceType 1.3.6.1.4.1.231.7.1.2.1.1.4.4.12.5
The service mode for the SDSL line.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20SdslServiceType  

xldv20SdcCtrlControlReqResult 1.3.6.1.4.1.231.7.1.2.1.1.4.4.12.6
The result of the last user command.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ControlReq  

xldv20SdcCtrlControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.1.4.4.12.7
The time stamp of the last command (end of command).
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

xldv20SdcCtrlMinMarginUp 1.3.6.1.4.1.231.7.1.2.1.1.4.4.12.8
The desired threshold for upstream margin when an alarm should be sent (in units of dB).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -127..128  

xldv20SdcPPTPTable 1.3.6.1.4.1.231.7.1.2.1.1.4.4.13
The physical path termination point table for SDSL C.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xldv20SdcPPTPEntry

xldv20SdcPPTPEntry 1.3.6.1.4.1.231.7.1.2.1.1.4.4.13.1
An entry describing a termination point in the PPTP table. Notifications : see xldv20IfEntry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20SdcPPTPEntry  

xldv20SdcRateCfg 1.3.6.1.4.1.231.7.1.2.1.1.4.4.13.1.1
The desired data rate. The data rate ranges from 160 to 2320 Kbit/sec. The cell rate ranges between 377 and 5471 cells/sec. Default is 5 ( 160 kbps/377cps).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20SdslDataRate  

xldv20SdcXdslServiceTypeCfg 1.3.6.1.4.1.231.7.1.2.1.1.4.4.13.1.2
The configured service mode for SDSL line.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20SdslServiceType  

xldv20SdcRate 1.3.6.1.4.1.231.7.1.2.1.1.4.4.13.1.3
The current downstream data rate. The data rate ranges from 160 to 2320 Kbit/sec. The cell rate ranges between 377 and 5471 cells/sec. Default is 5 ( 160 kbps/377cps).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20SdslDataRateCurrent  

xldv20SdcMarginDn 1.3.6.1.4.1.231.7.1.2.1.1.4.4.13.1.4
Not applicable. GetRequest returns marginNotApplicable .
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20AdslMargin  

xldv20SdcMarginUp 1.3.6.1.4.1.231.7.1.2.1.1.4.4.13.1.5
The current upstream margin in units of dB. Default is marginInvalid .
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20AdslMargin  

xldv20SdcAttenuationDn 1.3.6.1.4.1.231.7.1.2.1.1.4.4.13.1.6
Not applicable. GetRequest returns attenuationNotApplicable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20AdslAttenuation  

xldv20SdcAttenuationUp 1.3.6.1.4.1.231.7.1.2.1.1.4.4.13.1.7
The current upstream attenuation in steps of 0,5 dB. Default is attenuationInvalid.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20AdslAttenuation  

xldv20SdcLinkState 1.3.6.1.4.1.231.7.1.2.1.1.4.4.13.1.8
The link states of the SDSL Central Office Modem.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20LinkState  

xldv20SdcAISOnLOS 1.3.6.1.4.1.231.7.1.2.1.1.4.4.13.1.9
The attribute enables or disables the VP-AIS generation after defect LOS.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20OperState  

xldv20SdcAISOnACT 1.3.6.1.4.1.231.7.1.2.1.1.4.4.13.1.10
The attribute enables or disables the VP-AIS generation after link activation fault.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20OperState  

xldv20SdcGuaranteedBandwidthUsage 1.3.6.1.4.1.231.7.1.2.1.1.4.4.13.1.11
The guaranteed bandwidth in percent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..100  

xldv20SdcInitStatus 1.3.6.1.4.1.231.7.1.2.1.1.4.4.13.1.12
The initialization status field of an SDSL line. Describes the initalization error in case of an activation problem on an SDSL line .
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20XdslInitStatus  

xldv20SdcMinMarginUpCfg 1.3.6.1.4.1.231.7.1.2.1.1.4.4.13.1.13
The desired threshold for upstream margin when an alarm should be sent (in units of dB).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER -127..128  

xldv20SdcTransceiverOutputPower 1.3.6.1.4.1.231.7.1.2.1.1.4.4.13.1.14
The SDSL tranceiver output power. Granularity 1.0 dBm. Default value is outputPowerInvalid.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20AdslOutputPower  

xldv20SdcXdslServiceType 1.3.6.1.4.1.231.7.1.2.1.1.4.4.13.1.15
The current service type resulting from the configured service type. It depends on the actual hardware. Configuring gDotHsMode can result either in gDotLiteMode or gDotDmtMode. gDotAll can result in gDotDmtMode, ansiT1dot413 or gDotLiteMode. Default value is serviceTypeUnknown (10).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20XdslServiceTypeCurrent  

xldv20ImaMibObjects 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1
OBJECT IDENTIFIER    

xldv20ImaGroupNumber 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.1
The number of IMA groups configured on this system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

xldv20ImaControl 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.2
OBJECT IDENTIFIER    

xldv20ImaControlReq 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.2.1
The IMA control request object for IMA MIB objects.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20ControlReq  


xldv20ImaControlGroupIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.2.3
The index of the IMA group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..2147483647  

xldv20ImaControlReqResult 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.2.4
The result of the last user command.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ControlReq  

xldv20ImaControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.2.5
The time stamp of the last command (end of command).
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

xldv20ImaControlStatus 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.2.6
The status of the control request.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ControlStatus  

xldv20ImaControlTimer 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.2.7
The maximum wait time for the manager when changing the minimum number of active links. As the LUIMA performs a restart the command cannot be processed immediately ( value commExecStarted in GetResponse for xldv20ImaControlReq ).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32  

xldv20ImaGroupTable 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3
The IMA Group configuration Table. Index is ImaGroupIndex.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xldv20ImaGroupEntry

xldv20ImaGroupEntry 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1
An entry in the IMA Group table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20ImaGroupEntry  

xldv20ImaGroupIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.1
The index of the table identifying an IMA Group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

xldv20ImaGroupRowStatus 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.2
The imaGroupRowStatus object allows create, change, and delete operations on imaGroupTable entries. In the first version only one IMA group for the LU-IMA will be created during start-up.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20RowStatus  

xldv20ImaGroupIfIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.3
The IfIndex of the IMA group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned16  

xldv20ImaGroupNeState 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.4
The current operational state of the near-end IMA Group State Machine.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ImaGroupState  

xldv20ImaGroupFeState 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.5
The current operational state of the far-end IMA Group State Machine.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ImaGroupState  

xldv20ImaGroupFailureStatus 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.6
The current failure status of the IMA group (the reason why the GTSM is in the down state).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ImaGroupFailureStatus  

xldv20ImaGroupSymmetry 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.7
Symmetry of the IMA group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ImaGroupSymmetry  



xldv20ImaGroupNeTxClkMode 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.10
Transmit clocking mode used by the near-end IMA group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ImaGroupTxClkMode  

xldv20ImaGroupFeTxClkMode 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.11
Transmit clocking mode used by the far-end IMA group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ImaGroupTxClkMode  



xldv20ImaGroupLastChange 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.14
The time stamp the IMA group last changed operational state ( value of imaGroupNeState changed).
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

xldv20ImaGroupTxImaId 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.15
The IMA ID currently in use by the near-end IMA function.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

xldv20ImaGroupRxImaId 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.16
The IMA ID currently in use by the far-end IMA function.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

xldv20ImaGroupTxFrameLength 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.17
The frame length to be used by the IMA group in the transmit direction.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ImaFrameLength  

xldv20ImaGroupRxFrameLength 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.18
Value of IMA frame length as received from remote IMA function.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ImaFrameLength  

xldv20ImaGroupDiffDelayMax 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.19
The maximum number of milliseconds of differential delay among the links that will be tolerated on this interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MilliSeconds  


xldv20ImaGroupDiffDelayMaxObs 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.21
The latest maximum differential delay observed (in milliseconds) between the links having the least and most link propagation delay, among the receive links that are currently configured in the IMA group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MilliSeconds  

xldv20ImaGroupAlphaValue 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.22
This indicates the 'alpha' value used to specify the number of consecutive invalid ICP cells to be detected before moving to the IMA Hunt state from the IMA Sync state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2  

xldv20ImaGroupBetaValue 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.23
This indicates the 'beta' value used to specify the number of consecutive errored ICP cells to be detected before moving to the IMA Hunt state from the IMA Sync state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..5  

xldv20ImaGroupGammaValue 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.24
This indicates the 'gamma' value used to specify the number of consecutive valid ICP cells to be detected before moving to the IMA Sync state from the IMA PreSync state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..5  

xldv20ImaGroupRunningSecs 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.25
The amount of time (in seconds) since this IMA group has been in the operation (up or down).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32  

xldv20ImaGroupUnavailSecs 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.26
Count of one second intervals where the IMA Group Traffic State Machine is Down.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

xldv20ImaGroupNeNumFailures 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.27
The number of times a near-end group failure (Config-Aborted, Insufficient-Links) has been reported since power-up or reboot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

xldv20ImaGroupFeNumFailures 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.28
The number of times a far-end group failure (Config-Aborted, Insufficient-Links) has been reported since power-up or reboot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  





xldv20ImaGroupBandwidthUsage 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.33
Used bandwidth in percent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..100  

xldv20ImaGroupMappingTable 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.4
A table mapping the 'ifIndex' values of 'imaGroupIfIndex' to the 'imaGroupIndex' values of the corresponding IMA group. Index is ifIndex of IMA group (atmIma).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xldv20ImaGroupMappingEntry

xldv20ImaGroupMappingEntry 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.4.1
An entry in the IMA Group Mapping table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20ImaGroupMappingEntry  

xldv20ImaGroupMappingIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.4.1.1
The imaGroupIndex of the IMA Group which implements the specified interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32  

xldv20ImaLinkTable 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5
The IMA group Link Status and Configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xldv20ImaLinkEntry

xldv20ImaLinkEntry 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1
An entry in the IMA Group Link table. Index is IfIndex of dsx1nePPTP (e1nIma).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20ImaLinkEntry  

xldv20ImaLinkRowStatus 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.1
The imaLinkRowStatus object allows create, change, and delete operations on imaLinkTable entries. In the first version the IMA links for the LU-IMA will be created during start-up.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20RowStatus  

xldv20ImaLinkGroupIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.2
The value which identifies the IMA group (imaGroupIndex) of which this link is a member.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Integer32  

xldv20ImaLinkNeTxState 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.3
The current state of the near-end transmit link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ImaLinkState  

xldv20ImaLinkNeRxState 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.4
The current state of the near-end receive link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ImaLinkState  

xldv20ImaLinkFeTxState 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.5
The current state of the far-end transmit link as reported via ICP cells.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ImaLinkState  

xldv20ImaLinkFeRxState 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.6
The current state of the far-end receive link as reported via ICP cells.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ImaLinkState  

xldv20ImaLinkNeRxFailureStatus 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.7
The current link failure status of the near-end receive link as reported via ICP cells.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ImaLinkFailureStatus  

xldv20ImaLinkFeRxFailureStatus 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.8
The current link failure status of the far-end receive link as reported via ICP cells.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ImaLinkFailureStatus  

xldv20ImaLinkTxLid 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.9
The outgoing LID used currently on the link by the local end. This value has meaning only if the link belongs to an IMA group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

xldv20ImaLinkRxLid 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.10
The outgoing LID used currently on the link by the remote end. This value has meaning only if the link belongs to an IMA group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

xldv20ImaLinkImaViolations 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.11
ICP violations: count of errored, invalid or missing ICP cells, except during SES-IMA or UAS-IMA conditions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

xldv20ImaLinkOifAnomalies 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.12
The number of OIF anomalies, except during SES-IMA or UAS-IMA conditions, at the near-end. This is an optional attribute.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

xldv20ImaLinkNeSevErroredSecs 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.13
Count of one second intervals containing >= 30% of the ICP cells counted as IV-IMAs, or one or more link defects (e.g., LOS, OOF/LOF, AIS, or LCD), LIF defects, or LODS defects, except during UAS-IMA condition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

xldv20ImaLinkFeSevErroredSecs 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.14
Count of one second intervals containing one or more RDI-IMA defects, except during UAS-IMA-FE condition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

xldv20ImaLinkNeUnavailSecs 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.15
Count of unavailable seconds at near-end: unavailability begins at the onset of 10 contiguous SES-IMA and ends at the onset of 10 contiguous seconds with no SES-IMA.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

xldv20ImaLinkFeUnavailSecs 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.16
Count of unavailable seconds at near-end: unavailability begins at the onset of 10 contiguous SES-IMA-FE and ends at the onset of 10 contiguous seconds with no SES-IMA-FE.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

xldv20ImaLinkNeTxUnusableSecs 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.17
Tx Unusable seconds: count of Tx Unusable seconds at the near-end Tx LSM.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

xldv20ImaLinkNeRxUnusableSecs 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.18
Rx Unusable seconds: count of Rx Unusable seconds at the near-end Rx LSM.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

xldv20ImaLinkFeTxUnusableSecs 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.19
Tx Unusable seconds: count of Tx Unusable seconds at the far-end Tx LSM.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

xldv20ImaLinkFeRxUnusableSecs 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.20
Rx Unusable seconds: count of Rx Unusable seconds at the far-end Rx LSM.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

xldv20ImaLinkNeTxNumFailures 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.21
The number of times a near-end transmit failure alarm condition has been entered on this link (i.e., some form of implementation specific transmit fault).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

xldv20ImaLinkNeRxNumFailures 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.22
The number of times a near-end receive failure alarm condition has been entered on this link (i.e., LIF, LODS, RFI-IMA, Mis-Connected or some form of implementation specific receive fault).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

xldv20ImaLinkFeTxNumFailures 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.23
The number of times a far-end transmit failure alarm condition has been entered on this link (i.e., Tx-Unusable-FE). This is an optional attribute.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

xldv20ImaLinkFeRxNumFailures 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.24
The number of times a far-end receive failure alarm condition has been entered on this link (i.e., Rx-Unusable-FE). This is an optional attribute.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

xldv20ImaLinkTxStuffs 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.25
Count of stuff events inserted in the transmit direction. This is an optional attribute.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

xldv20ImaLinkRxStuffs 1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.26
Count of stuff events inserted in the receive direction. This is an optional attribute.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

xldv20LoopBackPointTable 1.3.6.1.4.1.231.7.1.2.1.1.4.5.1
The loop back point table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xldv20LbpEntry

xldv20LbpEntry 1.3.6.1.4.1.231.7.1.2.1.1.4.5.1.1
An entry in the loop back point table. The entry holds parameters of loop back points (as the loop location ID for loop back points or the loop mode). Loopback points are either the TCA at the LU* or SU or the IMA group at the LUIMA (within the DSLAM), or the TCA of adrPPTP at the NTAD. Notifications : see xldv20IfEntry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20LbpEntry  

xldv20LbpLoopLocId 1.3.6.1.4.1.231.7.1.2.1.1.4.5.1.1.1
A unique number known by the crafts person specifying the location where the OAM loopback cell shall be looped back. Loopback point is either the TCA at the LU* or SU (within the DSLAM) or the TCA of adrPPTP at NTAD. NOTE : Due to the functionality of ASPEN at SU the loop location ID only of port 1 is configurable. The IDs for port2-16 are calculated from this value by the ASPEN. TMN will store these values to the corresponding table entries .
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

xldv20LbpLoopMode 1.3.6.1.4.1.231.7.1.2.1.1.4.5.1.1.2
This attribute selects for connecting points whether the received loopback cell shall be forwarded or forwarded and looped back .
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20LoopMode  

xldv20PhyLoopTest 1.3.6.1.4.1.231.7.1.2.1.1.4.5.2
OBJECT IDENTIFIER    

xldv20PltIfIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.5.2.1
This attribute labels the location of the physical loopback. It can be the ifIndex of a PPTP at LI25, LU, SU .
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned16  

xldv20PltControlReq 1.3.6.1.4.1.231.7.1.2.1.1.4.5.2.2
The received command to start an OAM cell loopback test (loopDiagRequest). Notifications : xldv20TrPltTestResult .
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20ControlReq  

xldv20PltControlStatus 1.3.6.1.4.1.231.7.1.2.1.1.4.5.2.3
The status of the control request.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ControlStatus  

xldv20PltControlTimer 1.3.6.1.4.1.231.7.1.2.1.1.4.5.2.4
This is the maximum duration of a physical loop diagnosis. It is required by the SNMP manager to detect the end of a physical loop diagnosis in case of the response 'xldv20TrPltTestResult' was not received in time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32  

xldv20PltControlReqResult 1.3.6.1.4.1.231.7.1.2.1.1.4.5.2.5
The result of the last user command.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ControlReq  

xldv20PltControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.1.4.5.2.6
The time stamp of the last command (end of command).
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

xldv20AtmLoopTest 1.3.6.1.4.1.231.7.1.2.1.1.4.5.3
OBJECT IDENTIFIER    

xldv20AltIfIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.5.3.1
The TLM interface where OAM cells are inserted. It can be the 'IfIndex' of a PPTP at a LU or SU.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned16  

xldv20AltVpi 1.3.6.1.4.1.231.7.1.2.1.1.4.5.3.2
Identifies the VPI which shall be tested. It is VPINni when test in LE direction or it is VPIUni when test in NT direction.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4095  

xldv20AltLoopLocId 1.3.6.1.4.1.231.7.1.2.1.1.4.5.3.3
Test cell loopback location. It is an identifier known by the crafts person identifying a ATM node in the ATM network. For EndToEnd loop test the default value is valid.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

xldv20AltControlReq 1.3.6.1.4.1.231.7.1.2.1.1.4.5.3.4
The received command to start an OAM cell loopback test (loopTestRequest). Reject reasons are faulty parameters from the agent (response: paramFaulty, commExecStarted, loopTestReject, commandFailed) or a loop request during a running test (response: loopTestBusy). Notifications : xldv20TrAltTestResult .
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20ControlReq  

xldv20AltControlStatus 1.3.6.1.4.1.231.7.1.2.1.1.4.5.3.5
The status of the command handling.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ControlStatus  

xldv20AltControlTimer 1.3.6.1.4.1.231.7.1.2.1.1.4.5.3.6
The maximum duration of loop- back test. It is required by the SNMP manager to detect the end of loopback test in case of the response'xldv20TrAltTestResult' was not received in time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32  

xldv20AltOamLevel 1.3.6.1.4.1.231.7.1.2.1.1.4.5.3.7
The OAM level for loop test on VP/VC level. Valid: f4 (for VP ) f5 (for VC).
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20OamLevel  

xldv20AltLoopTestType 1.3.6.1.4.1.231.7.1.2.1.1.4.5.3.8
The type of loop test . For EndToEnd loop test loop location ID is FF..FF.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20TestType  

xldv20AltVci 1.3.6.1.4.1.231.7.1.2.1.1.4.5.3.9
Insertion point for OAM cells for F5 level
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

xldv20AltControlReqResult 1.3.6.1.4.1.231.7.1.2.1.1.4.5.3.10
The result of the last user command.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ControlReq  

xldv20AltFlowDirection 1.3.6.1.4.1.231.7.1.2.1.1.4.5.3.11
Labels the flow direction of loop back cells. 'inwards' meanxing towards cellbus. 'outwards' meaning towards UTOPIA interface .
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20FlowDirection  

xldv20AltControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.1.4.5.3.12
The time stamp of the last command (end of command).
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

xldv20MultipleLoopbackResultTable 1.3.6.1.4.1.231.7.1.2.1.1.4.5.4
The Multiple Loopback Result table. Used for the multiple loopback functionality to collect the IDs of connecting points which looped back to the XLD. When an ATM looptest is started the table is empty. An entry is created when an OAM cell is received from a connecting point.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xldv20MlbEntry

xldv20MlbEntry 1.3.6.1.4.1.231.7.1.2.1.1.4.5.4.1
An entry in the Multiple Loopback Result Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20MlbEntry  

xldv20MlbIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.5.4.1.1
The index of this table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned16  

xldv20MlbLoopLocId 1.3.6.1.4.1.231.7.1.2.1.1.4.5.4.1.2
A unique number known by the crafts person specifying the ID of a connecting point which looped back an OAM cell to the originating point (SU or LU) within the XLD.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

xldv20ExternalAlarmsTable 1.3.6.1.4.1.231.7.1.2.1.1.4.6.1
The entities of the table are used to control the forwarding of external alarms to the TMN-OS and LCT.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xldv20ExternalAlarmEntry

xldv20ExternalAlarmEntry 1.3.6.1.4.1.231.7.1.2.1.1.4.6.1.1
Entry of external alarm table. Notifications : xldv20TrExternalAlarm.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20ExternalAlarmEntry  

xldv20ExtAlarmIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.6.1.1.1
A unique number identifying an entry of the external alarm table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..3  

xldv20ExtAlarmAdminState 1.3.6.1.4.1.231.7.1.2.1.1.4.6.1.1.2
This attribute is used to activate (unlock) and deactivate (lock) the forwarding of the external alarm towards the manager.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20AdminState  

xldv20ExtAlarmOperState 1.3.6.1.4.1.231.7.1.2.1.1.4.6.1.1.3
Indicates whether or not the external alarm is capable of performing its normal functions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20OperState  

xldv20ExtAlarmActivityState 1.3.6.1.4.1.231.7.1.2.1.1.4.6.1.1.4
The status of the external alarm. Only if the operational state is enabled and the alarm state is on, an external alarm is generated for this object.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ExtAlarmActivityState  

xldv20ExtAlarmSeverityIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.6.1.1.5
The index of the associated entry in the alarm severity profile table. These entries contain the severity assigments for the alarms reported by this managed entity.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20AlmSevProfileIndex  

xldv20ExtAlarmFilteringIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.6.1.1.6
It is a pointer to the instance of the alarm filtering assignment profile managed entity that contains the filtering assignments for the alarms reported by this managed entity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20AlmFiltProfileIndex  

xldv20ExtAlarmName 1.3.6.1.4.1.231.7.1.2.1.1.4.6.1.1.7
Describe the input line and the type of external alarm. Default values on startup are : index=1 : Fan 1 Fail index=2 : Fan 2 Fail index=3 : High Temperature.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..50)  

xldv20AlarmSeverityProfileTable 1.3.6.1.4.1.231.7.1.2.1.1.4.6.2
The table of alarm severity profiles. Profiles can be created or deleted dynamically. Creating or deleting an entry in this table automatically creates or deletes the corresponding entries in the xldv20AlarmSevTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xldv20AlarmSeverityProfileEntry

xldv20AlarmSeverityProfileEntry 1.3.6.1.4.1.231.7.1.2.1.1.4.6.2.1
A group of severities, one for each alarm type in the communications alarm group.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20AlarmSeverityProfileEntry  

xldv20AlmSevProfileIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.6.2.1.1
A number identifying this alarm severity profile.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20AlmSevProfileIndex  

xldv20AlmSevProfileRowStatus 1.3.6.1.4.1.231.7.1.2.1.1.4.6.2.1.2
Used to create a new row or to delete an existing row in the table. Default value: xldv20AlmSevProfileIndex = 1..10: created xldv20AlmSevProfileIndex = 11..40: deleted .
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20RowStatus  

xldv20AlarmSeverityTable 1.3.6.1.4.1.231.7.1.2.1.1.4.6.3
The alarm severity table associates profile index and trap ID pairs with severities to be used for alarm traps that have occurred. (Note that this table does not apply to cleared alarms).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xldv20AlarmSeverityEntry

xldv20AlarmSeverityEntry 1.3.6.1.4.1.231.7.1.2.1.1.4.6.3.1
An entry in this table associates an alarm severity profile index/trap ID pair with a severity to be used for alarm traps. The alarm severity profile index is referenced by the 'Alarm Severity assignment Profile Pointer' attribute in the alarm-reporting managed entity e.g. plug-in unit and TLM interface (tcAdaptor, Physical Path Termination Point etc.). Notifications : none.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20AlarmSeverityEntry  

xldv20AlmSevTrapId 1.3.6.1.4.1.231.7.1.2.1.1.4.6.3.1.1
The trap ID of the alarm trap type this entry applies to. NOTE : the severity of xldv20TrAtmLayerMultiAlarm is not configurable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20TrapIds  

xldv20AlmSeverity 1.3.6.1.4.1.231.7.1.2.1.1.4.6.3.1.2
The severity to be used for this trap type when the entry is selected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20AlarmSeverity  

xldv20AlarmFilteringProfileTable 1.3.6.1.4.1.231.7.1.2.1.1.4.6.4
The table of alarm filtering profiles. Creating or deleting an entry in this table automatically creates or deletes the corresponding entries in the xldv20AlarmFilteringTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xldv20AlarmFilteringProfileEntry

xldv20AlarmFilteringProfileEntry 1.3.6.1.4.1.231.7.1.2.1.1.4.6.4.1
An entry of the alarm filtering profile table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20AlarmFilteringProfileEntry  

xldv20AlmFiltProfileIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.6.4.1.1
A number identifying this alarm filtering profile.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20AlmFiltProfileIndex  

xldv20AlmFiltProfileRowStatus 1.3.6.1.4.1.231.7.1.2.1.1.4.6.4.1.2
This object is used to create a new row or to delete an existing row in the table. Default value: xldv20AlmFiltProfileIndex = 1: created xldv20AlmFiltProfileIndex = 2 .. 300: deleted .
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20RowStatus  

xldv20AlarmFilteringTable 1.3.6.1.4.1.231.7.1.2.1.1.4.6.5
The alarm filtering table is used for temporairy filtering of alarms.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xldv20AlarmFilteringEntry

xldv20AlarmFilteringEntry 1.3.6.1.4.1.231.7.1.2.1.1.4.6.5.1
An entry in this table associates a trap id/ temporal filter parameter with a xldv20AlmFiltProfileIndex.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20AlarmFilteringEntry  

xldv20AlmFiltTrapId 1.3.6.1.4.1.231.7.1.2.1.1.4.6.5.1.1
The ID of the trap type this entry applies to.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20TrapIds  

xldv20AlmTempFilter 1.3.6.1.4.1.231.7.1.2.1.1.4.6.5.1.2
The temporal filtering period in seconds. The value 0 means no filtering.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..86400  

xldv20AlarmListTable 1.3.6.1.4.1.231.7.1.2.1.1.4.6.6
The alarm list table is used to store all reported alarms.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xldv20AlarmListEntry

xldv20AlarmListEntry 1.3.6.1.4.1.231.7.1.2.1.1.4.6.6.1
Entry of the alarm list table. Notifications : none.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20AlarmListEntry  

xldv20AlmIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.6.6.1.1
Unique value to identify an entry in the alarm list when the entry is read or cleared, when the entry is created.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..700  

xldv20AlmNatureOfAlarm 1.3.6.1.4.1.231.7.1.2.1.1.4.6.6.1.2
Generic trouble description of an alarm (the trap ID).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20TrapIds  

xldv20AlmSpecProblem 1.3.6.1.4.1.231.7.1.2.1.1.4.6.6.1.3
Description of further information about an alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

xldv20AlmSpecProblemText 1.3.6.1.4.1.231.7.1.2.1.1.4.6.6.1.4
Description of further information about an alarm in text form.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..50)  

xldv20AlmRepEntityId 1.3.6.1.4.1.231.7.1.2.1.1.4.6.6.1.5
The managed entity that reported the alarm. In case of a HWM / TLM / COH / GFH object it is the HW unit index / interface index / vpcTP or vccTp index / External Alarm index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Integer32  

xldv20AlmRepSource 1.3.6.1.4.1.231.7.1.2.1.1.4.6.6.1.6
Source reporting the alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20RepSource  

xldv20AlmFailedComponent 1.3.6.1.4.1.231.7.1.2.1.1.4.6.6.1.7
The managed entity which is defective.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Integer32  

xldv20AlmFailedComponentRepSource 1.3.6.1.4.1.231.7.1.2.1.1.4.6.6.1.8
The SW application isolating the failed component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20RepSource  

xldv20AlmSeverityOfFailure 1.3.6.1.4.1.231.7.1.2.1.1.4.6.6.1.9
The severity of an alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20AlarmSeverity  

xldv20AlmPropRepairAction 1.3.6.1.4.1.231.7.1.2.1.1.4.6.6.1.10
Suggestion of solutions to fix the problem.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Integer32  

xldv20AlmTimeAndDate 1.3.6.1.4.1.231.7.1.2.1.1.4.6.6.1.11
Entry time of the report into the log.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Integer32  

xldv20AlmControl 1.3.6.1.4.1.231.7.1.2.1.1.4.6.7
OBJECT IDENTIFIER    

xldv20AlmControlReq 1.3.6.1.4.1.231.7.1.2.1.1.4.6.7.1
Marks the received command to update the alarm list (updateAlmList) or the alarming filtering table (updateFiltList) or the request of Atm layer multi alarm traps (startSendingAlarms).
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20ControlReq  

xldv20AlmControlStatus 1.3.6.1.4.1.231.7.1.2.1.1.4.6.7.2
The status of the control request. The value requestIdle will be set after startup/recovery or after a running test was aborted by the SNMP manager.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ControlStatus  

xldv20AlmControlReqResult 1.3.6.1.4.1.231.7.1.2.1.1.4.6.7.3
The result of the last user command.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ControlReq  

xldv20AlmControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.1.4.6.7.4
The time stamp of the last command (end of command).
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

xldv20Reset 1.3.6.1.4.1.231.7.1.2.1.1.4.6.8
OBJECT IDENTIFIER    

xldv20RstControlReq 1.3.6.1.4.1.231.7.1.2.1.1.4.6.8.1
Request to perform a reset. Notifications : xldv20TrReplaceableUnitReset at beginning of reset PIU. xldv20TrReplaceableUnitResetEnd at end of reset PIU. xldv20TrRstResult for reset of CI in case of a failure occured after the reset has been accepted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20ControlReq  

xldv20RstControlStatus 1.3.6.1.4.1.231.7.1.2.1.1.4.6.8.2
The actual status of the reset procedure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ControlStatus  

xldv20RstLevel 1.3.6.1.4.1.231.7.1.2.1.1.4.6.8.3
The reset level. With this attribute the TMN-OS can deside to make a reset for one unit or the whole system.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20ResetLevel  

xldv20RstHwUnitIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.6.8.4
The (HwUnitIndex) of the plugin unit which should get the reset.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned16  

xldv20RstControlTimer 1.3.6.1.4.1.231.7.1.2.1.1.4.6.8.5
Timer value for the trap response. Only valid if xldv20RstControlStatus indicates requestBusy.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32  

xldv20RstControlReqResult 1.3.6.1.4.1.231.7.1.2.1.1.4.6.8.6
The result of the last user command.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ControlReq  

xldv20RstControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.1.4.6.8.7
The time stamp of the last command (end of command).
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

xldv20SwmLogHandler 1.3.6.1.4.1.231.7.1.2.1.1.4.7.1
OBJECT IDENTIFIER    

xldv20DbuControlReq 1.3.6.1.4.1.231.7.1.2.1.1.4.7.1.1
This attribute serves to launch a read request on either the Software Errorlog, the Software Tracelog or the Hardware Maintenancelog on the CI . From XLDV2.0 error logs and trace logs of PIUs of type SU,IL and LU are provided. Notifications : xldv20TrSweLogRead. xldv20TrHwmLogRead. xldv20TrTraceLogRead .
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20ControlReq  

xldv20DbuControlStatus 1.3.6.1.4.1.231.7.1.2.1.1.4.7.1.2
The status of the current read request.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ControlStatus  

xldv20DbuResultFilePath 1.3.6.1.4.1.231.7.1.2.1.1.4.7.1.3
The path (including the file name) where the file resulting from the read request should be stored. If this attribute does not contain a valid path the results will be printed on screen.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..150)  

xldv20DbuLogType 1.3.6.1.4.1.231.7.1.2.1.1.4.7.1.4
The log to be read by the read request.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20LogType  

xldv20DbuNumEntries 1.3.6.1.4.1.231.7.1.2.1.1.4.7.1.5
The number of log entries to be read. If it is 0 or if the passed number exceeds the number of entries mandatoryly in the log, the entire log will be read.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65536  

xldv20DbuControlTimer 1.3.6.1.4.1.231.7.1.2.1.1.4.7.1.6
The timer value for trap response.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32  

xldv20DbuControlReqResult 1.3.6.1.4.1.231.7.1.2.1.1.4.7.1.7
The result of the last user command.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ControlReq  

xldv20DbuHwUnitIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.7.1.8
The HwUnitIndex of the plug-in unit which log should be read.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned16  

xldv20DbuControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.1.4.7.1.9
The time stamp of the last command (end of command).
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

xldv20SwmUpgradeControl 1.3.6.1.4.1.231.7.1.2.1.1.4.7.2
OBJECT IDENTIFIER    

xldv20SucUnit 1.3.6.1.4.1.231.7.1.2.1.1.4.7.2.1
The plug-in unit type to be upgraded.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

xldv20SucAllOfType 1.3.6.1.4.1.231.7.1.2.1.1.4.7.2.2
Indicates that the loading for the dedicated unit type may be started n-times ( sucUpgrAll ) regarding to the number of boards of the same type within the DSLAM or for a single unit (sucUpgrSingle ).
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20SucAllOfType  

xldv20SucVersionNo 1.3.6.1.4.1.231.7.1.2.1.1.4.7.2.3
String containing the APS version coded into the load for the different board types (destination version). Default value is . Then the default SW version should be loaded.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..10)  

xldv20SucHwUnitIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.7.2.4
The hardware unit index of the plug-in unit to be loaded in case of an single upgrade.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned16  

xldv20SucPathName 1.3.6.1.4.1.231.7.1.2.1.1.4.7.2.5
The pathname of SAPS content file.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..121)  

xldv20SucFileName 1.3.6.1.4.1.231.7.1.2.1.1.4.7.2.6
The filename of SAPS content file.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..33)  

xldv20SucControlReq 1.3.6.1.4.1.231.7.1.2.1.1.4.7.2.7
SW upgrade command requests from TMN. Notifications : xldv20TrCmuReadyForReset. xldv20TrUnitReadyForReset. xldv20TrActivateLoadResult. xldv20TrPuUpgradeResult. xldv20TrFTPError. xldv20TrUpgradeCanceled. xldv20TrSwVersionsSet. xldv20TrReadSAPSContentFileReady. xldv20TrUpgradeEndRequestResult. xldv20TrUnitUpgradeNotRequested.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20ControlReq  

xldv20SucControlStatus 1.3.6.1.4.1.231.7.1.2.1.1.4.7.2.8
The status of the current request.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ControlStatus  

xldv20SucControlTimer 1.3.6.1.4.1.231.7.1.2.1.1.4.7.2.9
Wait time in seconds after complete upgrade for a unit type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32  

xldv20SucNumberOfTraps 1.3.6.1.4.1.231.7.1.2.1.1.4.7.2.10
Number of traps which have to be expected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Integer32  

xldv20SucDefaultSwVersion 1.3.6.1.4.1.231.7.1.2.1.1.4.7.2.11
The default SW version. Result of the command GetSwVersions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

xldv20SucPredecessorSwVersion 1.3.6.1.4.1.231.7.1.2.1.1.4.7.2.12
The predecessor Sw version. Result of the command GetSwVersions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

xldv20SucPrePredecessorSwVersion 1.3.6.1.4.1.231.7.1.2.1.1.4.7.2.13
The pre predecessor Sw version. Result of the command GetSwVersions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

xldv20SucControlReqResult 1.3.6.1.4.1.231.7.1.2.1.1.4.7.2.14
The result of the last user command.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ControlReq  

xldv20SucControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.1.4.7.2.15
The time stamp of the last command (end of command).
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

xldv20SwUpgradeTaskTable 1.3.6.1.4.1.231.7.1.2.1.1.4.7.3
Table of the current active or failed tasks of SW upgrade. Entries for successfull loading tasks are removed from the table. This table is used to display the upgrade status for single plugin units at the TMN.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xldv20SutTaskTableEntry

xldv20SutTaskTableEntry 1.3.6.1.4.1.231.7.1.2.1.1.4.7.3.1
Entry of the SW upgrade task table. Notifications : none.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20SutTaskTableEntry  

xldv20SutIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.7.3.1.1
Unique value to identify an entry of this table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned16  

xldv20SutPiuType 1.3.6.1.4.1.231.7.1.2.1.1.4.7.3.1.2
Indicates the plug-in unit type to be upgraded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

xldv20SutHwUnitIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.7.3.1.3
The HwUnitIndex of PIU to be loaded. From this value the TMN calculates the location shelf/slot of the plug-in unit and displays it at the GUI.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned16  

xldv20SutSwVersion 1.3.6.1.4.1.231.7.1.2.1.1.4.7.3.1.4
String containing the APS version which is loaded into the plug-in unit .
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..10)  

xldv20SutRequester 1.3.6.1.4.1.231.7.1.2.1.1.4.7.3.1.5
Identifies the requesting unit of the current upgrade task.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20Requester  

xldv20SutUpgradeState 1.3.6.1.4.1.231.7.1.2.1.1.4.7.3.1.6
Identifies the current processing state of the upgrade task.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ControlReq  

xldv20SutUpgradeResult 1.3.6.1.4.1.231.7.1.2.1.1.4.7.3.1.7
This read-only attribute informs about the result of the performes upgrade (in case of failed upgrade the error reason).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ControlReq  

xldv20SutTimeStamp 1.3.6.1.4.1.231.7.1.2.1.1.4.7.3.1.8
The time stamp of the task. It is updated anytime the upgrade task state changes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

xldv20StcSecureTelnetControl 1.3.6.1.4.1.231.7.1.2.1.1.4.7.4
OBJECT IDENTIFIER    

xldv20StcTelnetAccess 1.3.6.1.4.1.231.7.1.2.1.1.4.7.4.1
Feature not supported. The access mode of a telnet session. The setting of values read, trace, write will enable a secure telnet session with the corresponding access right. The setting of value noAccess will disable a telnet session.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20TelnetAccess  

xldv20DbmControl 1.3.6.1.4.1.231.7.1.2.1.1.4.8.1
OBJECT IDENTIFIER    

xldv20DbmControlReq 1.3.6.1.4.1.231.7.1.2.1.1.4.8.1.1
The command to store the database (backupDb) into the FEPROM of the DSLAM. The return value commExecStarted indicates the beginning of DB storage. Notifications : xldv20TrDbBackup indicates the end and the result of the database storage.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Xldv20ControlReq  

xldv20DbmControlStatus 1.3.6.1.4.1.231.7.1.2.1.1.4.8.1.2
The status of the control request.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ControlStatus  

xldv20DbmControlTimer 1.3.6.1.4.1.231.7.1.2.1.1.4.8.1.3
The maximum wait time for the manager when a DB storage request cannot be executed immediately (value commExecStarted in the result attribute xldv20DbmControlReqResult). The manager reads this value from the DSLAM. The end of request indicates the trap xldv20TrDbBackup.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32  

xldv20DbmBackupPeriod 1.3.6.1.4.1.231.7.1.2.1.1.4.8.1.4
Interval between two backup operations in hours.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 12..48  

xldv20DbmBackupStartTime 1.3.6.1.4.1.231.7.1.2.1.1.4.8.1.5
Start time of next DB backup in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..86400  

xldv20DbmControlReqResultLocal 1.3.6.1.4.1.231.7.1.2.1.1.4.8.1.6
The result of the local backup request.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ControlReq  

xldv20DbmControlReqResultRemote 1.3.6.1.4.1.231.7.1.2.1.1.4.8.1.7
The result of the last remote backup request.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Xldv20ControlReq  

xldv20DbmPathAndFileName 1.3.6.1.4.1.231.7.1.2.1.1.4.8.1.8
The path and filename (relative to the FTP root) of the DB backup file needed for the remote backup feature.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..150)  

xldv20DbmControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.1.4.8.1.9
The time stamp of the last command (end of command).
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

xldv20TrapVars 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1
OBJECT IDENTIFIER    

xldv20TvStartupResult 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.1
Indicates the result at end of startup.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20StartupResult  

xldv20TvStartupType 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.2
Indicates the kind of performed restart.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20StartupType  

xldv20TvSnmLctSession 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.3
Indicates the state of a LCT session .
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20SnmLctSession  

xldv20TvRepEntity 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.4
The hardware unit index (HWM) or interface index (TLM) or index of COH reporting entities.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Unsigned16  

xldv20TvRepSource 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.5
Indicates the source of a reporting entity.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20RepSource  

xldv20TvTimeAndDate 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.6
The time stamp in seconds.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32  

xldv20TvActCcReloadResult 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.7
The result of the cross connection reload.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER ok(1), notOk(2), lineIndexFaulty(3)  

xldv20TvActCcStatus 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.8
The index (xldv20ActVpiNni) of faulty cross connect in the table xldv20AtmCrossConnectTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32  

xldv20TvAlmNatureOfAlarm 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.9
The nature of an alarm. Corresponds to xldv20AlarmSevTrapID.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20TrapIds  

xldv20TvAlmSpecProblem 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.10
The specific problem reported by alarming.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32  

xldv20TvAlmFailedComponent 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.11
Describes the failed component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32  

xldv20TvAlmSeverityOfFailure 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.12
The severity of the repoprted failure.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20AlarmSeverity  

xldv20TvAlmStatus 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.13
Flag indicating whether alarm appears or is cleared.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER present(0), cleared(1)  

xldv20TvAlmPropRepairAction 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.14
Indicates proposed repair actions reported by the agent for the problem identified by the alarm.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32  

xldv20TvAlmFailedComponentRepSource 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.15
Indicates the source of the reporting entity.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20RepSource  

xldv20TvStcOldAdminStatus 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.16
The old administrative status of the entity changing its state.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20AdminState  

xldv20TvStcNewAdminStatus 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.17
The new administrative status of the entity changing its state.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20AdminState  

xldv20TvStcOldOperStatus 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.18
The old operational state of the reporting entity.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20OperState  

xldv20TvStcNewOperStatus 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.19
The new operational state of the reporting entity.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20OperState  

xldv20TvTsrControlStatus 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.20
The control status of the test result.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20ControlStatus  

xldv20TvRstResult 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.21
This value indicates the result of a reset request.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20RstResult  

xldv20TvRstHwUnitIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.22
This value indicates the hardware unit of a reset request.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Unsigned16  

xldv20TvHweResetType 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.23
The reset type of a hardware event.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20StartupType  

xldv20TvAdcControlStatus 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.24
The result of the changeRate request.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32  

xldv20TvSucResult 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.25
Result of software upgrade.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20ControlReq  

xldv20TvSucUnit 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.26
corresponds to the attribute xldSwmUpgradeControl.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(0..20)  

xldv20TvSucHwUnitIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.27
This attribute corresponds to the one in the group xldSwmUpgradeControl.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Unsigned16  

xldv20TvSucVersionNo 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.28
This attribute corresponds to the one in the group xldSwmUpgradeControl. Default value:
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(0..10)  

xldv20TvSucPathName 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.29
This attribute corresponds to the one in the group xldSwmUpgradeControl.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(0..150)  

xldv20TvSucFileName 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.30
This attribute corresponds to the one in the group xldSwmUpgradeControl.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(0..50)  

xldv20TvDbuSweLogReadResult 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.31
The value indicates the read result of the software error log.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20DbuReadStatus  

xldv20TvDbuHwmLogReadResult 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.32
The value indicates the read result of the hardware maintenance log.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20DbuReadStatus  

xldv20TvDbuSwTraceLogReadResult 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.33
The value indicates the read result of the software trace log.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20DbuReadStatus  

xldv20TvHwUnitType 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.34
The type of the created or deleted Hwm object.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20HwUnitType  

xldv20TvHwContainingUnitIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.35
HwUnitIndex of the created or deleted Hwm object.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Unsigned16  

xldv20TvHwContainedUnitAddr 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.36
A number of the contained Unit
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..512  

xldv20TvHwuControlResult 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.37
The result of the request xldv20HwuControlReq.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20ControlReq  

xldv20TvRiRemInvResult 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.38
The result of the Remote Inventory Data reading.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20RiResultType  

xldv20TvVersionNrCmuLoad 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.39
The version number of the current CI load.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(0..20)  

xldv20TvBackupResult 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.40
The result of the request xldv20DbmControlReq.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20ControlReq  

xldv20TvVpiNni 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.41
The VpiNni value of the cross connect.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32  

xldv20TvVpiNniIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.42
The index of the cross connect in the ATM cross connect table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Unsigned16  

xldv20TvVplTerminationPointA 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.43
For a point-to-point cross connect this attribute identifies the instance of the VPL termination point that represents the VPL at the LE side.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32  

xldv20TvVplTerminationPointZ 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.44
For a point-to-point cross connect this attribute identifies the instance of the VPL termination point that represents the VPL at the NT side.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32  

xldv20TvSnmMibVersion 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.47
The version number of the current MIB .
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(0..30)  

xldv20TvSnmAgentVersion 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.48
The version number of the current Agent SW .
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(0..30)  

xldv20TvVciNni 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.49
VciNni
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32  

xldv20TvVciNniIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.50
Index of a VciNni
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Unsigned16  

xldv20TvVclTerminationPointA 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.51
Index of a Vcl termination point at NNI side.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32  

xldv20TvVclTerminationPointZ 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.52
Index of a Vcl termination point at UNI side.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32  

xldv20TvVpcTpIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.53
Index of a VpcTp
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Unsigned16  

xldv20TvVpcNniIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.54
Index of a VpcTp at NNI side .
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Unsigned16  

xldv20TvVpcUniIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.55
Index of a VpcTp at UNI side .
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Unsigned16  

xldv20TvEthVccTpIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.56
Index of a VccTp .
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Unsigned16  

xldv20TvVpiValue 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.57
VPI value
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32  

xldv20TvVciValue 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.58
VCI value
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Unsigned16  

xldv20TvVplTpIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.59
Index of a VplTp.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32  

xldv20TvVplIfIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.60
IfIndex of PPTP associated to a VplTp.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32  

xldv20TvAlmFailedComponentString 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.61
Up 50 times indeces of VpcTp's or VccTp's.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..100)  

xldv20TvTelnetSession 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.62
Signalizes the status of a telnet session.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20TvTelnetSessionStatus  

xldv20TvEthIfIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.63
Index of configured Eth Entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32  

xldv20TvCACProblemType 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.64
problem type when CAC problem .
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20ControlReq  

xldv20TvCACBandwidthUsageUp 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.65
used bandwidth in percent of guaranteed bandwidth (without UBR traffic).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..100  

xldv20TvEthVpcTpIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.66
Index of VpcTp at Ethernet port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Unsigned16  

xldv20TvEthEntryIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.68
used within TrVplCcDeletion.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Unsigned16  

xldv20TvRepEntityExt 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.69
The hardware unit index (HWM) or interface index (TLM) or index of COH reporting ext. entities.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Unsigned16  

xldv20TvTelnetSessionUser 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.70
The Telnet user name currently logged.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(0..20)  

xldv20TvIndexSegment 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.71
Index of entry in Xldv20ContinuityCheckVpTable or Xldv20ContinuityCheckVcTable for continuity check on segment level.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Unsigned16  

xldv20TvIndexEndToEnd 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.72
Index of entry in Xldv20ContinuityCheckVpTable or Xldv20ContinuityCheckVcTable for endToEnd continuity check.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Unsigned16  

xldv20TvRestoreResult 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.75
The result of the DB restoration after reload.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20ControlReq  

xldv20TvCACBandwidthUsageDown 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.76
used bandwidth downstream in percent of guaranteed bandwidth.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..100  

xldv20TvCallpObjectType 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.77
Specifies the type of COH Object .
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20RepSource  

xldv20TvVpcTpIfIndex 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.79
new for V2.0
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..9192  

xldv20TvAlmSpecProblemText 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.80
Textual description of specific problem reported by alarming.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(0..50)  

xldv20TvImaSetNumResult 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.81
Result of command imaSetMinNumTxLinks .
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20ControlReq  

xldv20TvStcOldAvailStatus 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.82
The old availability state of the reporting entity.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20AvailStatus  

xldv20TvStcNewAvailStatus 1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.83
The new availability state of the reporting entity.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Xldv20AvailStatus  

xldv20TrapTypes 1.3.6.1.4.1.231.7.1.2.1.1.4.10.2
OBJECT IDENTIFIER    

xldv20TrHpExcBER 1
Excessive bit error rate at high order path.
TRAP-TYPE    

xldv20TrHpUNEQ 2
Unequipped at higher order path.
TRAP-TYPE    

xldv20TrLcd 3
Loss of cell delineation.
TRAP-TYPE    

xldv20TrLof 4
Los of frame.
TRAP-TYPE    

xldv20TrLop 5
Loss of pointer.
TRAP-TYPE    

xldv20TrLos 6
Loss of signal.
TRAP-TYPE    

xldv20TrMsAIS 7
Alarm indication signal at multiplexer section.
TRAP-TYPE    

xldv20TrMsExcBER 8
Excessive bit error rate at multiplexer section.
TRAP-TYPE    

xldv20TrMsRDI 9
Remote defect indication at multiplexer section.
TRAP-TYPE    

xldv20TrMsSD 10
Signal degrade at multiplexer section.
TRAP-TYPE    

xldv20TrPAIS 11
Alarm indication signal at path.
TRAP-TYPE    

xldv20TrPRDI 12
Remote defect indication at path.
TRAP-TYPE    

xldv20TrRsExcBER 13
Excessive bit error rate at repeater section.
TRAP-TYPE    

xldv20TrSlm 14
Signal label mismatch.
TRAP-TYPE    

xldv20TrTim 15
Trace identification mismatch.
TRAP-TYPE    

xldv20TrActFault 16
The ADSL C PPTP reports a link activation fault.
TRAP-TYPE    

xldv20TrReplaceableUnitTypeMismatch 17
Trap to indicate that a wrong unit is plugged.
TRAP-TYPE    

xldv20TrReplaceableUnitFailure 18
Indicates a unit Out Of Service.
TRAP-TYPE    

xldv20TrReplaceableUnitProblem 19
Indicates a unit partly Out Of Service.
TRAP-TYPE    

xldv20TrReplaceableUnitNotInstalled 20
Indicates that the unit is not plugged.
TRAP-TYPE    

xldv20TrReplaceableUnitSwMismatch 21
The SW version in the inventory data mismatches with the configured version in the equipment holder.
TRAP-TYPE    

xldv20TrReplaceableUnitReset 22
A replaceable unit is performing a reset.
TRAP-TYPE    

xldv20TrReplaceableUnitResetEnd 23
A replaceable unit finished a reset.
TRAP-TYPE    

xldv20TrStartupEnd 24
End of startup.
TRAP-TYPE    

xldv20TrLctSession 25
Event concerning a LCT session .
TRAP-TYPE    

xldv20TrSnmAgentRunning 26
SNMP agent is active now.
TRAP-TYPE    

xldv20TrRstResult 27
Result of reset.
TRAP-TYPE    

xldv20TrPltTestResult 28
Result of loop test.
TRAP-TYPE    

xldv20TrStateChangeAdmin 29
The administrative state of the reporting entity has changed.
TRAP-TYPE    

xldv20TrStateChangeOper 30
The operational state of the reporting entity has changed.
TRAP-TYPE    

xldv20TrChangeRate 31
This trap indicates the end of change rate request.
TRAP-TYPE    

xldv20TrCmuReadyForReset 32
Indicates upgrade end. Unit is ready for reset.
TRAP-TYPE    

xldv20TrAltTestResult 33
Result of ATM loop test.
TRAP-TYPE    

xldv20TrActivateLoadResult 34
This trap indicates that a replaceable unit is performing a reset.
TRAP-TYPE    

xldv20TrPuUpgradeSucc 35
Upgrade ended successfully.
TRAP-TYPE    

xldv20TrUpgradeCancelled 36
The upgrade request has been cancelled.
TRAP-TYPE    

xldv20TrFtpError 38
Sw upgrade reports a problem with FTP.
TRAP-TYPE    

xldv20TrSweLogRead 40
End of SWE log reading.
TRAP-TYPE    

xldv20TrHwmLogRead 41
End of HWM log reading.
TRAP-TYPE    

xldv20TrTraceLogRead 42
End of trace log reading.
TRAP-TYPE    

xldv20TrVplCcCreation 45
The resulting indeces of a VPC creation command.
TRAP-TYPE    

xldv20TrVplCcDeletion 46
The resulting indeces of a VPC deletion command.
TRAP-TYPE    

xldv20TrObjCreate 100
Create object event. The varBinds xldv20TvHwUnitType and xldv20TvHwContainingUnitIndex only occure when xldv20TvRepSource = hwm.
TRAP-TYPE    

xldv20TrObjDelete 101
Delete object event. The varBinds xldv20TvHwUnitType and xldv20TvHwContainingUnitIndex only occure when xldv20TvRepSource = hwm.
TRAP-TYPE    

xldv20TrXmissionErr 105
Transmission Error from LIETH:S.
TRAP-TYPE    

xldv20TrExternalAlarm 110
External alarm.
TRAP-TYPE    

xldv20TrUnitReadyForReset 111
Indicates upgrade end. Unit is ready for reset.
TRAP-TYPE    

xldv20TrHwuControl 112
End of xldv20HwuControlReq.
TRAP-TYPE    

xldv20TrReplaceableUnitRemoved 113
Replaceable unit removed.
TRAP-TYPE    

xldv20TrAIS 114
Alarm indication signal at E3/DS3.
TRAP-TYPE    

xldv20TrRDI 115
Remote defect indication at E3/DS3/dsx1f.
TRAP-TYPE    

xldv20TrPlcpLof 116
Loss of Plcp frame at E3/DS3.
TRAP-TYPE    

xldv20TrPlcpRDI 117
Plcp Remote defect indication at E3/DS3.
TRAP-TYPE    

xldv20TrRemInvReady 118
Remote inventory ready.
TRAP-TYPE    

xldv20TrDbBackup 119
Result of Storage of DB.
TRAP-TYPE    

xldv20TrSwVersionSet 120
Equipment holder data updated.
TRAP-TYPE    

xldv20TrReadSAPSContentFileReady 121
End of SAPS content file reading.
TRAP-TYPE    

xldv20TrReplaceableUnitSwMissing 122
No SW load found in content file corresponding to mnemo code and FW item number in equipHolder entry.
TRAP-TYPE    

xldv20TrInternalFault 123
Internal SW/HW fault.
TRAP-TYPE    

xldv20TrVclCcCreation 127
The resulting indeces of a VC CC creation command.
TRAP-TYPE    

xldv20TrVclCcDeletion 128
The resulting indeces of a VCL CC deletion command.
TRAP-TYPE    

xldv20TrImmMNR 130
Immediate Margin Not Reached Fault
TRAP-TYPE    

xldv20TrLpr 131
Loss of Power (dying gasp)
TRAP-TYPE    

xldv20TrLol 132
Loss of Link (ADC Los without preceding ADR Lpr)
TRAP-TYPE    

xldv20TrAtmLayerMultiAlarm 135
Atm Layer Multi Alarm
TRAP-TYPE    

xldv20TrTelnetSession 136
Signalizes an established / stopped telnet session.
TRAP-TYPE    

xldv20TrVplCACProblem 137
Indicates a warning for a resource problem by creating a VplCC.
TRAP-TYPE    

xldv20TrVclCACProblem 139
Indicates a warning for a resource problem while creating a VclCC.
TRAP-TYPE    

xldv20TrWrongServiceConfigData 141
Config Adc Rates out of Range for UDSL.
TRAP-TYPE    

xldv20TrReplaceableUnitPlugged 142
Notification: A PIU has been plugged.
TRAP-TYPE    

xldv20TrReplaceableUnitUnplugged 143
Notification: A PIU has been unplugged.
TRAP-TYPE    

xldv20TrStateChangeOperExt 144
The operational state of the reporting external entity has changed.
TRAP-TYPE    

xldv20TrLOC 145
Loss of continuity.
TRAP-TYPE    

xldv20TrDbRestore 150
DB restoration result.
TRAP-TYPE    

xldv20TrUpgradeEndRequestResult 151
Result of sucUpgrEndRequest command.
TRAP-TYPE    

xldv20TrUnitUpgradeNotRequested 152
Result of sucUpgrEndRequest command.
TRAP-TYPE    

xldv20TrVpcTpCreation 400
VpcTp created
TRAP-TYPE    

xldv20TrVpcTpDeletion 401
VpcTp deleted
TRAP-TYPE    

xldv20TrVpcTpCACProblem 402
Indicates a warning for a resource problem while creating a VpcTP
TRAP-TYPE    

xldv20TrContinuityCheckVpEntryCreated 403
Xldv20ContinuityCheckVpEntry created .
TRAP-TYPE    

xldv20TrContinuityCheckVpEntryDeleted 404
Xldv20ContinuityCheckVpEntry deleted .
TRAP-TYPE    

xldv20TrContinuityCheckVcEntryCreated 405
Xldv20ContinuityCheckVcEntry created .
TRAP-TYPE    

xldv20TrContinuityCheckVcEntryDeleted 406
Xldv20ContinuityCheckVcEntry deleted .
TRAP-TYPE    

xldv20TrExcBER 407
Excessive Bit Error Ratio at near-end dsx1 PPTP.
TRAP-TYPE    

xldv20TrLif 408
Loss of IMA frame at near-end dsx1 PPTP.
TRAP-TYPE    

xldv20TrLods 409
Link out of Delay Sychronisation at near-end dsx1 PPTP.
TRAP-TYPE    

xldv20TrTxUnusableFe 410
Tx is unusable at far-end dsx1 PPTP.
TRAP-TYPE    

xldv20TrRxUnusableFe 411
Rx is unusable at far-end dsx1 PPTP.
TRAP-TYPE    

xldv20TrRfiIma 412
Remote failure indication defect at far-end dsx1 PPTP.
TRAP-TYPE    

xldv20TrRAI 413
Far-end ds1 IMA PPTP reports remote alarm indication.
TRAP-TYPE    

xldv20TrStartUpFe 450
IMA group isn't able to finish startup at far-end.
TRAP-TYPE    

xldv20TrConfigAbort 451
Far-end tries to use unacceptable configuration parameter.
TRAP-TYPE    

xldv20TrConfigAbortFe 452
Far-end reports unacceptable configuration parameters.
TRAP-TYPE    


xldv20TrInsufficientLinksFe 454
Less than minimum number of links are active for IMA group (detected on far-end).
TRAP-TYPE    

xldv20TrBlockedFe 455
Far-end reports that it is blocked.
TRAP-TYPE    


xldv20TrStateChangeAvail 457
The availablity state of the reporting entity has changed.
TRAP-TYPE    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor