XEROX-HOST-RESOURCES-EXT-MIB

File: XEROX-HOST-RESOURCES-EXT-MIB.mib (169007 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
HOST-RESOURCES-MIB Printer-MIB XEROX-COMMON-MIB
XEROX-GENERAL-TC XEROX-HOST-RESOURCES-EXT-TC

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
OBJECT-IDENTITY Counter32 Integer32
DateAndTime RowStatus TruthValue
MODULE-COMPLIANCE OBJECT-GROUP ProductID
hrDeviceIndex hrDeviceStatus hrSWRunIndex
hrSWInstalledIndex hrStorageIndex PresentOnOff
xeroxCommonMIB Ordinal32 Cardinal32
XcmFixedLocaleDisplayString XcmGenSNMPv2ErrorStatus xcmGenZeroDotZero
XcmHrDevCalendarDayOfWeek XcmHrDevCalendarTimeOfDay XcmHrDevDetailType
XcmHrDevDetailUnitClass XcmHrDevInfoRealization XcmHrDevInfoStatus
XcmHrDevInfoXStatus XcmHrDevInfoConditions XcmHrDevInfoXConditions
XcmHrDevMgmtCommandRequest XcmHrDevMgmtCommandData XcmHrDevPowerTimeUnit
XcmHrDevTrafficUnit XcmHrGroupSupport XcmHrSWRunXStatus
XcmHrStorageDetailType XcmHrStorageRealization

Defined Types

XcmHrGeneralEntry  
SEQUENCE    
  xcmHrGeneralIndex Ordinal32
  xcmHrGeneralRowStatus RowStatus
  xcmHrGeneralVersionID ProductID
  xcmHrGeneralVersionDate DateAndTime
  xcmHrGeneralGroupSupport XcmHrGroupSupport
  xcmHrGeneralStorageLast Cardinal32
  xcmHrGeneralDeviceLast Cardinal32
  xcmHrGeneralFSLast Cardinal32
  xcmHrGeneralSWRunLast Cardinal32
  xcmHrGeneralSWInstalledLast Cardinal32
  xcmHrGeneralSystemFaultLast Cardinal32
  xcmHrGeneralCreateSupport XcmHrGroupSupport
  xcmHrGeneralUpdateSupport XcmHrGroupSupport

XcmHrDevInfoEntry  
SEQUENCE    
  xcmHrDevInfoRowStatus RowStatus
  xcmHrDevInfoName XcmFixedLocaleDisplayString
  xcmHrDevInfoSerialNumber XcmFixedLocaleDisplayString
  xcmHrDevInfoRealization XcmHrDevInfoRealization
  xcmHrDevInfoXStatus XcmHrDevInfoXStatus
  xcmHrDevInfoConditions XcmHrDevInfoConditions
  xcmHrDevInfoXConditions XcmHrDevInfoXConditions
  xcmHrDevInfoInstallDate DateAndTime
  xcmHrDevInfoResetDate DateAndTime
  xcmHrDevInfoNextDeviceIndex Cardinal32
  xcmHrDevInfoPreviousDeviceIndex Cardinal32
  xcmHrDevInfoPhysicalDeviceIndex Cardinal32

XcmHrDevHelpEntry  
SEQUENCE    
  xcmHrDevHelpRowStatus RowStatus
  xcmHrDevHelpOperatorMessage XcmFixedLocaleDisplayString
  xcmHrDevHelpProblemMessage XcmFixedLocaleDisplayString
  xcmHrDevHelpCommsAddressIndex Cardinal32

XcmHrDevMgmtEntry  
SEQUENCE    
  xcmHrDevMgmtRowStatus RowStatus
  xcmHrDevMgmtCommandRequest XcmHrDevMgmtCommandRequest
  xcmHrDevMgmtCommandData XcmHrDevMgmtCommandData
  xcmHrDevMgmtCommandStatus XcmGenSNMPv2ErrorStatus
  xcmHrDevMgmtUserPassword OCTET STRING
  xcmHrDevMgmtOperatorPassword OCTET STRING
  xcmHrDevMgmtAdminPassword OCTET STRING
  xcmHrDevMgmtCommandInProgress TruthValue

XcmHrDevPowerEntry  
SEQUENCE    
  xcmHrDevPowerRowStatus RowStatus
  xcmHrDevPowerWarmUpSupport PresentOnOff
  xcmHrDevPowerCoolDownSupport PresentOnOff
  xcmHrDevPowerEnergySaveSupport PresentOnOff
  xcmHrDevPowerTimeUnit XcmHrDevPowerTimeUnit
  xcmHrDevPowerWarmUpDelay Integer32
  xcmHrDevPowerWarmUpDuration Integer32
  xcmHrDevPowerCoolDownDelay Integer32
  xcmHrDevPowerCoolDownDuration Integer32
  xcmHrDevPowerEnergySaveDelay Integer32
  xcmHrDevPowerEnergySaveDuration Integer32
  xcmHrDevPowerWakeUpSupport PresentOnOff
  xcmHrDevPowerWakeUpDelay Integer32
  xcmHrDevPowerWakeUpDuration Integer32
  xcmHrDevPowerShutdownDelay Integer32
  xcmHrDevPowerShutdownDuration Integer32
  xcmHrDevPowerStartupDelay Integer32
  xcmHrDevPowerStartupDuration Integer32

XcmHrDevTrafficEntry  
SEQUENCE    
  xcmHrDevTrafficRowStatus RowStatus
  xcmHrDevTrafficInputSupport PresentOnOff
  xcmHrDevTrafficOutputSupport PresentOnOff
  xcmHrDevTrafficInputUnit XcmHrDevTrafficUnit
  xcmHrDevTrafficOutputUnit XcmHrDevTrafficUnit
  xcmHrDevTrafficInputCount Counter32
  xcmHrDevTrafficOutputCount Counter32
  xcmHrDevTrafficInputMaxSize Cardinal32
  xcmHrDevTrafficOutputMaxSize Cardinal32
  xcmHrDevTrafficInputTimeout Integer32
  xcmHrDevTrafficOutputTimeout Integer32

XcmHrSystemFaultEntry  
SEQUENCE    
  xcmHrSystemFaultIndex Ordinal32
  xcmHrSystemFaultRowStatus RowStatus
  xcmHrSystemFaultCode Integer32
  xcmHrSystemFaultString XcmFixedLocaleDisplayString
  xcmHrSystemFaultReferenceOID OBJECT IDENTIFIER
  xcmHrSystemFaultHrDeviceIndex Cardinal32
  xcmHrSystemFaultDate DateAndTime

XcmHrDevCalendarEntry  
SEQUENCE    
  xcmHrDevCalendarDayOfWeek XcmHrDevCalendarDayOfWeek
  xcmHrDevCalendarTimeOfDay XcmHrDevCalendarTimeOfDay
  xcmHrDevCalendarRowStatus RowStatus
  xcmHrDevCalendarExplicitDate DateAndTime
  xcmHrDevCalendarCommandRequest XcmHrDevMgmtCommandRequest
  xcmHrDevCalendarCommandData XcmHrDevMgmtCommandData

XcmHrSWRunEntry  
SEQUENCE    
  xcmHrSWRunRowStatus RowStatus
  xcmHrSWRunAdminName XcmFixedLocaleDisplayString
  xcmHrSWRunXStatus XcmHrSWRunXStatus
  xcmHrSWRunRowCreateDate DateAndTime
  xcmHrSWRunPhysicalDeviceIndex Cardinal32
  xcmHrSWRunLogicalDeviceIndex Cardinal32
  xcmHrSWRunNextIndex Cardinal32
  xcmHrSWRunPreviousIndex Cardinal32

XcmHrSWInstalledEntry  
SEQUENCE    
  xcmHrSWInstalledRowStatus RowStatus
  xcmHrSWInstalledAdminName XcmFixedLocaleDisplayString
  xcmHrSWInstalledXStatus XcmHrSWRunXStatus
  xcmHrSWInstalledRowCreateDate DateAndTime
  xcmHrSWInstalledPhysicalIndex Cardinal32
  xcmHrSWInstalledLogicalIndex Cardinal32
  xcmHrSWInstalledNextIndex Cardinal32
  xcmHrSWInstalledPreviousIndex Cardinal32

XcmHrDevDetailEntry  
SEQUENCE    
  xcmHrDevDetailType XcmHrDevDetailType
  xcmHrDevDetailIndex Ordinal32
  xcmHrDevDetailRowStatus RowStatus
  xcmHrDevDetailUnitClass XcmHrDevDetailUnitClass
  xcmHrDevDetailUnit Cardinal32
  xcmHrDevDetailValueInteger Integer32
  xcmHrDevDetailValueOID OBJECT IDENTIFIER
  xcmHrDevDetailValueString OCTET STRING

XcmHrStorageEntry  
SEQUENCE    
  xcmHrStorageRowStatus RowStatus
  xcmHrStorageRealization XcmHrStorageRealization
  xcmHrStorageStatus XcmHrDevInfoStatus
  xcmHrStorageProductDeviceIndex Cardinal32
  xcmHrStoragePlatformDeviceIndex Cardinal32
  xcmHrStoragePagingDeviceIndex Cardinal32
  xcmHrStorageMatchingDeviceIndex Cardinal32
  xcmHrStorageSWRunIndex Cardinal32
  xcmHrStorageSWInstalledIndex Cardinal32
  xcmHrStorageNextIndex Cardinal32
  xcmHrStoragePreviousIndex Cardinal32
  xcmHrStoragePhysicalIndex Cardinal32

XcmHrStorageDetailEntry  
SEQUENCE    
  xcmHrStorageDetailType XcmHrStorageDetailType
  xcmHrStorageDetailIndex Ordinal32
  xcmHrStorageDetailRowStatus RowStatus
  xcmHrStorageDetailUnitClass XcmHrDevDetailUnitClass
  xcmHrStorageDetailUnit Cardinal32
  xcmHrStorageDetailValueInteger Integer32
  xcmHrStorageDetailValueOID OBJECT IDENTIFIER
  xcmHrStorageDetailValueString OCTET STRING

XcmHrDevCoverEntry  
SEQUENCE    
  xcmHrDevCoverIndex Ordinal32
  xcmHrDevCoverRowStatus RowStatus
  xcmHrDevCoverName XcmFixedLocaleDisplayString
  xcmHrDevCoverDescription XcmFixedLocaleDisplayString
  xcmHrDevCoverTypeCover TruthValue
  xcmHrDevCoverStatusOpen TruthValue

Defined Values

xcmHrMIB 1.3.6.1.4.1.253.8.53
Version: 2.40.pub The MIB module for extended configuration and management of various host resources for network accessible host systems. This module augments and extends the original IETF Host Resources MIB (RFC 1514). Usage: This MIB module introduces support for the 'realization' of both 'physical' and 'logical' devices, consistent with the Document Printing Application (DPA), ISO/IEC 10175, as reflected in the object 'xcmHrDevInfoRealization'. Note: Conforming implementations shall NOT 'bubble up' status from 'physical' devices to associated 'logical' devices. All devices shall ALWAYS report their own status ONLY. Copyright (C) 1997 Xerox Corporation. All Rights Reserved.
MODULE-IDENTITY    

xcmHrGeneral 1.3.6.1.4.1.253.8.53.9
OBJECT IDENTIFIER    

xcmHrGeneralTable 1.3.6.1.4.1.253.8.53.9.2
A table of general counters and information for ease of use of the XCMI Host Resources Extensions MIB and the IETF Host Resources MIB (RFC 1514) on this host system. Usage: The ONLY valid row in the 'xcmHrGeneralTable' shall ALWAYS have an 'xcmHrGeneralIndex' of one ('1').
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    XcmHrGeneralEntry

xcmHrGeneralEntry 1.3.6.1.4.1.253.8.53.9.2.1
An entry of general counters and information for ease of use of the XCMI Host Resources Extensions MIB and the IETF Host Resources MIB (RFC 1514) on this host system. Usage: The ONLY valid row in the 'xcmHrGeneralTable' shall ALWAYS have an 'xcmHrGeneralIndex' of one ('1').
Status: current Access: not-accessible
OBJECT-TYPE    
  XcmHrGeneralEntry  

xcmHrGeneralIndex 1.3.6.1.4.1.253.8.53.9.2.1.1
A unique value used by this host system to identify this conceptual row in the 'xcmHrGeneralTable'. Usage: The ONLY valid row in the 'xcmHrGeneralTable' shall ALWAYS have an 'xcmHrGeneralIndex' of one ('1').
Status: current Access: not-accessible
OBJECT-TYPE    
  Ordinal32  

xcmHrGeneralRowStatus 1.3.6.1.4.1.253.8.53.9.2.1.2
This object is used to display status of the ONLY valid conceptual row in the 'xcmHrGeneralTable'. Usage: 'xcmHrGeneralRowStatus' is 'read-only' because the ONLY valid conceptual row shall NOT be deleted.
Status: current Access: read-only
OBJECT-TYPE    
  RowStatus  

xcmHrGeneralVersionID 1.3.6.1.4.1.253.8.53.9.2.1.3
The software product ID of the SNMP sub-agent which implements the IETF Host Resources MIB (RFC 1514) and XCMI Host Resources Extensions MIB on this host system. Usage: This object shall specify the software product ID of an SNMP sub-agent (possibly also found in a conceptual row in the 'hrSWRunTable' and/or 'hrSWInstalledTable' in the IETF HR MIB). This object shall NOT specify a particular release of the IETF HR MIB, the XCMI HRX MIB, or the whole host system product. Note: Contrast with 'sysObjectID' for the whole SNMP agent in the IETF MIB-II (RFC 1213) and 'hrDeviceID' for the whole device (or whole product, in the case of 'xcmHrDevice...') in the IETF Host Resources MIB (RFC 1514).
Status: current Access: read-only
OBJECT-TYPE    
  ProductID  

xcmHrGeneralVersionDate 1.3.6.1.4.1.253.8.53.9.2.1.4
The software build date of the SNMP sub-agent which implements the IETF Host Resources MIB (RFC 1514) and XCMI Host Resources Extensions MIB on this host system. Usage: This object shall specify the BUILD date of the SNMP sub-agent software (not available elsewhere in IETF/XCMI MIBs). This object shall NOT specify the INSTALL date of the SNMP sub-agent software on this host system, nor the RESET date. Note: Contrast with 'hrSWInstalledDate' in the Software Installed group of the IETF Host Resources MIB (RFC 1514), and 'xcmHrDevInfoResetDate' in the Device Info group of the XCMI Host Resources Extensions MIB.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

xcmHrGeneralGroupSupport 1.3.6.1.4.1.253.8.53.9.2.1.5
The terse conformance statement of ALL mandatory, conditionally mandatory, and optional IETF Host Resources MIB (RFC 1514) and XCMI Host Resources Extensions MIB objects which are supported by this management agent implementation (ie, version) on this host system, specified in a bit-mask. Usage: Conforming management agents shall ALWAYS accurately report their support for IETF Host Resources MIB (RFC 1514) and XCMI Host Resources Extensions MIB object groups.
Status: current Access: read-only
OBJECT-TYPE    
  XcmHrGroupSupport  

xcmHrGeneralStorageLast 1.3.6.1.4.1.253.8.53.9.2.1.6
The last entry index (regardless of its current state) in the 'hrStorageTable' of the IETF Host Resources MIB, on this host system. Usage: The last entry index explicitly bounds the valid range of 'hrStorageIndex'.
Status: current Access: read-only
OBJECT-TYPE    
  Cardinal32  

xcmHrGeneralDeviceLast 1.3.6.1.4.1.253.8.53.9.2.1.7
The last entry index (regardless of its current state) in the 'hrDeviceTable' of the IETF Host Resources MIB, on this host system. Usage: The last entry index explicitly bounds the valid range of 'hrDeviceIndex'.
Status: current Access: read-only
OBJECT-TYPE    
  Cardinal32  

xcmHrGeneralFSLast 1.3.6.1.4.1.253.8.53.9.2.1.8
The last entry index (regardless of its current state) in the 'hrFSTable' of the IETF Host Resources MIB, on this host system. Usage: The last entry index explicitly bounds the valid range of 'hrFSIndex'.
Status: current Access: read-only
OBJECT-TYPE    
  Cardinal32  

xcmHrGeneralSWRunLast 1.3.6.1.4.1.253.8.53.9.2.1.9
The last entry index (regardless of its current state) in the 'hrSWRunTable' of the IETF Host Resources MIB, on this host system. Usage: The last entry index explicitly bounds the valid range of 'hrSWRunIndex'.
Status: current Access: read-only
OBJECT-TYPE    
  Cardinal32  

xcmHrGeneralSWInstalledLast 1.3.6.1.4.1.253.8.53.9.2.1.10
The last entry index (regardless of its current state) in the 'hrSWInstalledTable' of the IETF Host Resources MIB, on this host system. Usage: The last entry index explicitly bounds the valid range of 'hrSWInstalledIndex'.
Status: current Access: read-only
OBJECT-TYPE    
  Cardinal32  

xcmHrGeneralSystemFaultLast 1.3.6.1.4.1.253.8.53.9.2.1.11
The last entry index (regardless of its current state) in the 'xcmHrSystemFaultTable' of this XCMI Host Resources Ext MIB, on this host system. Usage: The last entry index explicitly bounds the valid range of 'xcmHrSystemFaultIndex'.
Status: current Access: read-only
OBJECT-TYPE    
  Cardinal32  

xcmHrGeneralCreateSupport 1.3.6.1.4.1.253.8.53.9.2.1.12
The terse conformance statement of ALL mandatory, conditionally mandatory, and optional IETF Host Resources MIB (RFC 1514) and XCMI Host Resources Extensions MIB objects which are supported for dynamic row creation (via '...RowStatus') by this management agent implementation (ie, version) on this host system, specified in a bit-mask. Usage: Conforming management agents shall ALWAYS accurately report their support for IETF Host Resources MIB (RFC 1514) and XCMI Host Resources Extensions MIB object groups.
Status: current Access: read-only
OBJECT-TYPE    
  XcmHrGroupSupport  

xcmHrGeneralUpdateSupport 1.3.6.1.4.1.253.8.53.9.2.1.13
The terse conformance statement of ALL mandatory, conditionally mandatory, and optional IETF Host Resources MIB (RFC 1514) and XCMI Host Resources Extensions MIB objects which are supported for existing row update (via SNMP Set-Request PDUs) by this management agent implementation (ie, version) on this host system, specified in a bit-mask. Usage: Conforming management agents shall ALWAYS accurately report their support for IETF Host Resources MIB (RFC 1514) and XCMI Host Resources Extensions MIB object groups.
Status: current Access: read-only
OBJECT-TYPE    
  XcmHrGroupSupport  

xcmHrDevInfo 1.3.6.1.4.1.253.8.53.3
OBJECT IDENTIFIER    

xcmHrDevInfoTable 1.3.6.1.4.1.253.8.53.3.2
A 'sparse' table containing device info objects for installed and (possibly) active devices on this host system, augmenting the basic entries in the 'hrDeviceTable' of the IETF Host Resources MIB (RFC 1514). Usage: Although this group is Mandatory in this MIB module, this table is 'sparse' because conforming management agents need NOT implement an entry in 'xcmHrDevInfoTable' for ALL of the installed (and instrumented) devices in 'hrDeviceTable'. Usage: Conforming management agents shall ALWAYS implement an entry in 'xcmHrDevInfoTable' for the following device types (if they are installed devices in 'hrDeviceTable'): 'hrDevicePrinter' (from IETF Host Resource MIB, RFC 1514); and 'xcmHrDeviceHostSystem', 'xcmHrDeviceScanner', 'xcmHrDeviceCopier', 'xcmHrDeviceFax', and 'xcmHrDeviceMailbox' (from XCMI HRX TC).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    XcmHrDevInfoEntry

xcmHrDevInfoEntry 1.3.6.1.4.1.253.8.53.3.2.1
A 'sparse' entry containing device info objects for an installed and (possibly) active device on this host system, augmenting a basic entry in the 'hrDeviceTable' of the IETF Host Resources MIB (RFC 1514).
Status: current Access: not-accessible
OBJECT-TYPE    
  XcmHrDevInfoEntry  

xcmHrDevInfoRowStatus 1.3.6.1.4.1.253.8.53.3.2.1.1
This object manages the SMIv2 row status of this conceptual row in the 'xcmHrDevInfoTable' and ALSO manages the row status of the associated conceptual row in the 'hrDeviceTable' of the IETF Host Resources MIB (RFC 1514).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

xcmHrDevInfoName 1.3.6.1.4.1.253.8.53.3.2.1.2
Human-readable device name, used by system administrators and end users to identify this device for systems management. Usage: This device name shall be the one normally used in a CLI/GUI/API for control of this device (eg, 'LPT1:').
Status: current Access: read-create
OBJECT-TYPE    
  XcmFixedLocaleDisplayString Size(0..255)  

xcmHrDevInfoSerialNumber 1.3.6.1.4.1.253.8.53.3.2.1.3
Human-readable serial number, used by system administrators and end users to identify this device for systems management.
Status: current Access: read-create
OBJECT-TYPE    
  XcmFixedLocaleDisplayString Size(0..255)  

xcmHrDevInfoRealization 1.3.6.1.4.1.253.8.53.3.2.1.4
An extended device type (or device 'realization'), used by system administrators and end users of this device.
Status: current Access: read-create
OBJECT-TYPE    
  XcmHrDevInfoRealization  

xcmHrDevInfoXStatus 1.3.6.1.4.1.253.8.53.3.2.1.5
An extended device status, used by system administrators and end users of this device (here, read 'state' for 'status'). Usage: Conforming implementations shall NOT 'bubble up' status from 'physical' devices to associated 'logical' devices. All devices shall ALWAYS report their own status ONLY. Usage: Exactly one enumeration of extended device status shall be defined, with ranges for each basic device type (eg, 'hrDevicePrinter'). The legal range for extended device status for a given device type (either defined by RFC 1514 or by this MIB) is found by multiplying the final arc of the the device type OID by 100 - the result is the device specific range base - the end of the device specific range is 99 larger. These device specific extended device status values shall be reissued periodically in the 'XcmHrDevInfoXStatus' textual convention.
Status: current Access: read-only
OBJECT-TYPE    
  XcmHrDevInfoXStatus  

xcmHrDevInfoConditions 1.3.6.1.4.1.253.8.53.3.2.1.6
A relatively generic description of the current 'conditions' of this device. Usage: It is desirable that the implementor report 'conditions' of all devices corresponding to conceptual rows in the 'hrDeviceTable' as accurately as feasible. 'Conditions' occur within or across 'states' in a finite state machine (FSM) implementation of a device. They represent both short term and long term conditions.
Status: current Access: read-only
OBJECT-TYPE    
  XcmHrDevInfoConditions  

xcmHrDevInfoXConditions 1.3.6.1.4.1.253.8.53.3.2.1.7
A device specific description of the extended 'conditions' of this device. Usage: For FUTURE expansion. Usage: Exactly one bit mask of extended device conditions shall be defined for each basic device type (eg, 'hrDevicePrinter'). These device specific extended device conditions values shall be reissued periodically in the 'XcmHrDevInfoXConditions' textual convention. These device specific extended device conditions are mutually exclusive and 'overloaded' in the single reporting object 'xcmHrDevInfoXConditions'.
Status: current Access: read-only
OBJECT-TYPE    
  XcmHrDevInfoXConditions  

xcmHrDevInfoInstallDate 1.3.6.1.4.1.253.8.53.3.2.1.8
The date of the most recent install or upgrade of the device represented by this conceptual row in the 'hrDeviceTable'.
Status: current Access: read-create
OBJECT-TYPE    
  DateAndTime  

xcmHrDevInfoResetDate 1.3.6.1.4.1.253.8.53.3.2.1.9
The date of the most recent auto or managed reset of the device represented by this conceptual row in the 'hrDeviceTable'.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

xcmHrDevInfoNextDeviceIndex 1.3.6.1.4.1.253.8.53.3.2.1.10
The value of 'hrDeviceIndex' corresponding to: a) the next associated row in the 'hrDeviceTable'; or b) zero if this is the last associated conceptual row in a given set; or c) zero if this conceptual row is NOT part of a set.
Status: current Access: read-create
OBJECT-TYPE    
  Cardinal32  

xcmHrDevInfoPreviousDeviceIndex 1.3.6.1.4.1.253.8.53.3.2.1.11
The value of 'hrDeviceIndex' corresponding to: a) the previous associated row in the 'hrDeviceTable'; or b) zero if this is the first associated conceptual row in a given set; or c) zero if this conceptual row is NOT part of a set.
Status: current Access: read-create
OBJECT-TYPE    
  Cardinal32  

xcmHrDevInfoPhysicalDeviceIndex 1.3.6.1.4.1.253.8.53.3.2.1.12
The value of 'hrDeviceIndex' corresponding to the directly associated conceptual row in the 'hrDeviceTable' representing: a) the first underlying 'physical' device (if any), if this row has 'xcmHrDevInfoRealization' of 'logical'; or b) the first subordinate 'physical' device (if any), if this row has 'xcmHrDevInfoRealization' of 'physical' or 'logicalAndPhysical'; or c) zero if there is no underlying or subordinate 'physical' device associated with this row (ie, this device).
Status: current Access: read-create
OBJECT-TYPE    
  Cardinal32  

xcmHrDevInfoV1EventOID 1.3.6.1.4.1.253.8.53.3.1
The value of the enterprise-specific OID in an SNMPv1 trap sent whenever a device status variable changes. See SNMPv2 trap definition 'xcmHrDevInfoV2Event' below for 'special semantics'.
Status: current Access: read-create
OBJECT-IDENTITY    

xcmHrDevInfoV2EventPrefix 1.3.6.1.4.1.253.8.53.3.1.0
OBJECT IDENTIFIER    

xcmHrDevInfoV2Event 1.3.6.1.4.1.253.8.53.3.1.0.1
This trap is sent whenever 'hrDeviceStatus' and/or 'xcmHrDevInfo[XStatus|Conditions|XConditions]' changes. Note: The variable-bindings of this trap have been chosen to specify a complete device status change while keeping trap messages reasonably concise (generally a few hundred octets at most). This notification has the following special semantics: o The device's 'hrDeviceIndex' field value shall ALWAYS be appended to this trap object ID, as a BER binary OID suffix. This trap OID qualifier allows device management/monitoring applications to limit the alerts they receive to ones generated by devices of interest.
Status: current Access: read-create
NOTIFICATION-TYPE    

xcmHrDevHelp 1.3.6.1.4.1.253.8.53.4
OBJECT IDENTIFIER    

xcmHrDevHelpTable 1.3.6.1.4.1.253.8.53.4.2
A 'sparse' table containing device help objects for installed and (possibly) active devices on this host system, augmenting the basic entries in the 'hrDeviceTable' of the IETF Host Resources MIB (RFC 1514).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    XcmHrDevHelpEntry

xcmHrDevHelpEntry 1.3.6.1.4.1.253.8.53.4.2.1
A 'sparse' entry containing device help objects for an installed and (possibly) active device on this host system, augmenting a basic entry in the 'hrDeviceTable' of the IETF Host Resources MIB (RFC 1514).
Status: current Access: not-accessible
OBJECT-TYPE    
  XcmHrDevHelpEntry  

xcmHrDevHelpRowStatus 1.3.6.1.4.1.253.8.53.4.2.1.1
This object manages the SMIv2 row status of this conceptual row in the 'xcmHrDevHelpTable'.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

xcmHrDevHelpOperatorMessage 1.3.6.1.4.1.253.8.53.4.2.1.2
Human-readable operator message, used by system operators and system administrators to display an operator message for end users of this device. For example, 'Out to lunch - back at 1pm'.
Status: current Access: read-create
OBJECT-TYPE    
  XcmFixedLocaleDisplayString Size(0..255)  

xcmHrDevHelpProblemMessage 1.3.6.1.4.1.253.8.53.4.2.1.3
Human-readable problem message, used by system operators and system administrators to display a problem message for end users of this device. For example, 'Toner low - only small jobs accepted'.
Status: current Access: read-create
OBJECT-TYPE    
  XcmFixedLocaleDisplayString Size(0..255)  

xcmHrDevHelpCommsAddressIndex 1.3.6.1.4.1.253.8.53.4.2.1.4
The value of 'xcmCommsAddressIndex' corresponding to the first associated conceptual row in the 'xcmCommsAddressTable', or zero if this 'xcmHrDevHelpEntry' does NOT require such information. This 'chain' of address entries provides device help contact info for end users of this device. For example, 'system operator' or 'supplies' contact info.
Status: current Access: read-create
OBJECT-TYPE    
  Cardinal32  

xcmHrDevMgmt 1.3.6.1.4.1.253.8.53.5
OBJECT IDENTIFIER    

xcmHrDevMgmtTable 1.3.6.1.4.1.253.8.53.5.2
A 'sparse' table containing management control objects for installed and (possibly) active devices on this host system, augmenting the basic entries in the 'hrDeviceTable' of the IETF Host Resources MIB (RFC 1514).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    XcmHrDevMgmtEntry

xcmHrDevMgmtEntry 1.3.6.1.4.1.253.8.53.5.2.1
A 'sparse' entry containing management control objects for an installed and (possibly) active device on this host system, augmenting a basic entry in the 'hrDeviceTable' of the IETF Host Resources MIB (RFC 1514).
Status: current Access: not-accessible
OBJECT-TYPE    
  XcmHrDevMgmtEntry  

xcmHrDevMgmtRowStatus 1.3.6.1.4.1.253.8.53.5.2.1.1
This object manages the SMIv2 row status of this conceptual row in the 'xcmHrDevMgmtTable'.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

xcmHrDevMgmtCommandRequest 1.3.6.1.4.1.253.8.53.5.2.1.2
The most recent device management command request specified for this conceptual row in the 'xcmHrDevMgmtTable'.
Status: current Access: read-create
OBJECT-TYPE    
  XcmHrDevMgmtCommandRequest  

xcmHrDevMgmtCommandData 1.3.6.1.4.1.253.8.53.5.2.1.3
The most recent device management command data (if any) specified for this conceptual row in the 'xcmHrDevMgmtTable'.
Status: current Access: read-create
OBJECT-TYPE    
  XcmHrDevMgmtCommandData Size(0..255)  

xcmHrDevMgmtCommandStatus 1.3.6.1.4.1.253.8.53.5.2.1.4
The simple device management error status associated with this conceptual row in 'xcmHrDevMgmtTable'. Usage: Conforming management agents shall ALWAYS set this object to the value returned in an SNMP Set-Response PDU when a simple device management operation is 'accepted', ie, when 'xcmHrDevMgmtCommandInProgress' goes from 'false' to 'true'. Usage: Conforming management agents shall ALWAYS set this object to the value of the completion status of the (possibly deferred) simple device management operation, when 'xcmHrDevMgmtCommandInProgress' goes from 'true' to 'false'.
Status: current Access: read-only
OBJECT-TYPE    
  XcmGenSNMPv2ErrorStatus  

xcmHrDevMgmtUserPassword 1.3.6.1.4.1.253.8.53.5.2.1.5
A protected end user password for this device.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

xcmHrDevMgmtOperatorPassword 1.3.6.1.4.1.253.8.53.5.2.1.6
A protected system operator password for this device.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

xcmHrDevMgmtAdminPassword 1.3.6.1.4.1.253.8.53.5.2.1.7
A protected system administrator password for this device.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

xcmHrDevMgmtCommandInProgress 1.3.6.1.4.1.253.8.53.5.2.1.8
The device management in progress status associated with this conceptual row in 'xcmHrDevMgmtTable'.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

xcmHrDevMgmtV1EventOID 1.3.6.1.4.1.253.8.53.5.1
The value of the enterprise-specific OID in an SNMPv1 trap sent whenever an 'xcmHrDevMgmtCommandRequest' completes. See SNMPv2 trap definition 'xcmHrDevMgmtV2Event' below for 'special semantics'.
Status: current Access: read-only
OBJECT-IDENTITY    

xcmHrDevMgmtV2EventPrefix 1.3.6.1.4.1.253.8.53.5.1.0
OBJECT IDENTIFIER    

xcmHrDevMgmtV2Event 1.3.6.1.4.1.253.8.53.5.1.0.1
This trap is sent whenever an 'XcmHrDevMgmtCommandRequest' completes, ie, when 'xcmHrDevMgmtCommandStatus' becomes the completed operation status and 'XcmHrDevMgmtCommandInProgress' goes from 'true' to 'false'. Note: The variable-bindings of this trap have been chosen to specify a complete management operation result while keeping trap messages reasonably concise (generally a few hundred octets at most). This notification has the following special semantics: o The device's 'hrDeviceIndex' field value shall ALWAYS be appended to this trap object ID, as a BER binary OID suffix. This trap OID qualifier allows device management/monitoring applications to limit the alerts they receive to ones generated by requests they have submitted.
Status: current Access: read-only
NOTIFICATION-TYPE    

xcmHrDevPower 1.3.6.1.4.1.253.8.53.6
OBJECT IDENTIFIER    

xcmHrDevPowerTable 1.3.6.1.4.1.253.8.53.6.2
A 'sparse' table containing power management cycle objects for installed and (possibly) active devices on this host system, augmenting the basic entries in the 'hrDeviceTable' of the IETF Host Resources MIB (RFC 1514).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    XcmHrDevPowerEntry

xcmHrDevPowerEntry 1.3.6.1.4.1.253.8.53.6.2.1
A 'sparse' entry containing power management cycle objects for an installed and (possibly) active device on this host system, augmenting a basic entry in the 'hrDeviceTable' of the IETF Host Resources MIB (RFC 1514).
Status: current Access: not-accessible
OBJECT-TYPE    
  XcmHrDevPowerEntry  

xcmHrDevPowerRowStatus 1.3.6.1.4.1.253.8.53.6.2.1.1
This object manages the SMIv2 row status of this conceptual row in the 'xcmHrDevPowerTable'.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

xcmHrDevPowerWarmUpSupport 1.3.6.1.4.1.253.8.53.6.2.1.2
A device 'warm up' feature support management object, used by system administrators of this device. Usage: This object specifies the support present (if any) for a device 'warm up' feature ('standbyMode' to 'readyMode'). For example, a photocopier might want to 'warm up' (as a system) (to 'readyMode') some time after a user presses a button. * 'other(1)' - DEPRECATED - shall NOT be used by conforming implementations * 'on(3)' - device 'warm up' feature is present and enabled both '...WarmUpDelay' and '...WarmUpDuration' are used - if '...WarmUpDelay' is zero, then 'warm up' cycle begins immediately after trigger event - if '...WarmUpDelay' is non-zero, then 'warm up' cycle is delayed for specified time - if '...WarmUpDuration' is zero, then 'warm up' cycle completes immediately after initiation - if '...WarmUpDuration' is non-zero, then 'warm up' cycle requires specified time to complete * 'off(4)' - device 'warm up' feature is present but disabled both '...WarmUpDelay' and '...WarmUpDuration' not used * 'notPresent(5)' - device 'warm up' feature NOT present on this host system both '...WarmUpDelay' and '...WarmUpDuration' not used
Status: current Access: read-create
OBJECT-TYPE    
  PresentOnOff  

xcmHrDevPowerCoolDownSupport 1.3.6.1.4.1.253.8.53.6.2.1.3
A device 'cool down' feature support management object, used by system administrators of this device. Usage: This object specifies the support present (if any) for a device 'cool down' feature ('readyMode' to 'standbyMode'). For example, a printer might want to 'cool down' a motor (to 'standbyMode') some time after the last page printed. * 'other(1)' - DEPRECATED - shall NOT be used by conforming implementations * 'on(3)' - device 'cool down' feature is present and enabled both '...CoolDownDelay' and '...CoolDownDuration' are used - if '...CoolDownDelay' is zero, then 'cool down' cycle begins immediately after trigger event - if '...CoolDownDelay' is non-zero, then 'cool down' cycle is delayed for specified time - if '...CoolDownDuration' is zero, then 'cool down' cycle completes immediately after initiation - if '...CoolDownDuration' is non-zero, then 'cool down' cycle requires specified time to complete * 'off(4)' - device 'cool down' feature is present but disabled both '...CoolDownDelay' and '...CoolDownDuration' not used * 'notPresent(5)' - device 'cool down' feature NOT present on this host system both '...CoolDownDelay' and '...CoolDownDuration' not used
Status: current Access: read-create
OBJECT-TYPE    
  PresentOnOff  

xcmHrDevPowerEnergySaveSupport 1.3.6.1.4.1.253.8.53.6.2.1.4
A device 'energy save' feature support management object, used by system administrators of this device. Usage: This object specifies the support present (if any) for a device 'energy save' feature ('standbyMode' to 'sleepMode'). For example, a printer might want to 'energy save' transition (to 'sleepMode') some time after the last 'cool down' (to 'standbyMode') completion. * 'other(1)' - DEPRECATED - shall NOT be used by conforming implementations * 'on(3)' - device 'energy save' feature is present and enabled both '...EnergySaveDelay' and '...EnergySaveDuration' are used - if '...EnergySaveDelay' is zero, then 'energy save' cycle begins immediately after trigger event - if '...EnergySaveDelay' is non-zero, then 'energy save' cycle is delayed for specified time - if '...EnergySaveDuration' is zero, then 'energy save' cycle completes immediately after initiation - if '...EnergySaveDuration' is non-zero, then 'energy save' cycle requires specified time to complete * 'off(4)' - device 'energy save' feature is present but disabled both '...EnergySaveDelay' and '...EnergySaveDuration' not used * 'notPresent(5)' - device 'energy save' feature NOT present on this host system both '...EnergySaveDelay' and '...EnergySaveDuration' not used
Status: current Access: read-create
OBJECT-TYPE    
  PresentOnOff  

xcmHrDevPowerTimeUnit 1.3.6.1.4.1.253.8.53.6.2.1.5
A device power cycle time unit, used by system administrators of this device for power management cycle times. Usage: Used to scale the values in the Device Power group, for convenience and (optional) high resolution.
Status: current Access: read-create
OBJECT-TYPE    
  XcmHrDevPowerTimeUnit  

xcmHrDevPowerWarmUpDelay 1.3.6.1.4.1.253.8.53.6.2.1.6
A device 'warm up' feature delay time, or zero if none, used by system administrators of this device. Usage: The time delay after last 'warm up' trigger event (eg, arrival of a job, some local user action, etc) before the 'warm up' cycle will begin (to power 'readyMode' in 'xcmHrDevInfoConditions').
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

xcmHrDevPowerWarmUpDuration 1.3.6.1.4.1.253.8.53.6.2.1.7
A device 'warm up' feature duration, or zero if none, used by system administrators of this device. Usage: The time after last 'warm up' initiation before the 'warm up' will complete (to power 'readyMode' in 'xcmHrDevInfoConditions').
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

xcmHrDevPowerCoolDownDelay 1.3.6.1.4.1.253.8.53.6.2.1.8
A device 'cool down' feature delay time, or zero if none, used by system administrators of this device. Usage: The time delay after last 'cool down' trigger event (eg, completion of a job, some local user action, etc) before the 'cool down' cycle will begin (to power 'standbyMode' in 'xcmHrDevInfoConditions').
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

xcmHrDevPowerCoolDownDuration 1.3.6.1.4.1.253.8.53.6.2.1.9
A device 'cool down' feature duration, or zero if none, used by system administrators of this device. Usage: The time after last 'cool down' initiation before the 'cool down' will complete (to power 'standbyMode' in 'xcmHrDevInfoConditions').
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

xcmHrDevPowerEnergySaveDelay 1.3.6.1.4.1.253.8.53.6.2.1.10
A device 'energy save' feature delay time, or zero if none, used by system administrators of this device. Usage: The time delay after last 'energy save' trigger event (eg, completion of the last 'cool down' cycle to 'standbyMode') before the 'energy save' cycle will begin (to power 'sleepMode' in 'xcmHrDevInfoConditions').
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

xcmHrDevPowerEnergySaveDuration 1.3.6.1.4.1.253.8.53.6.2.1.11
A device 'energy save' feature duration, or zero if none, used by system administrators of this device. Usage: The time after last 'energy save' initiation before the 'energy save' will complete (to power 'sleepMode' in 'xcmHrDevInfoConditions').
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

xcmHrDevPowerWakeUpSupport 1.3.6.1.4.1.253.8.53.6.2.1.12
A device 'wake up' feature support management object, used by system administrators of this device. Usage: This object specifies the support present (if any) for a device 'wake up' feature ('sleepMode' to 'standbyMode'). For example, a photocopier might want to 'wake up' (as a system) (to 'standbyMode') some time after a user presses a button. * 'other(1)' - DEPRECATED - shall NOT be used by conforming implementations * 'on(3)' - device 'wake up' feature is present and enabled both '...WakeUpDelay' and '...WakeUpDuration' are used - if '...WakeUpDelay' is zero, then 'wake up' cycle begins immediately after trigger event - if '...WakeUpDelay' is non-zero, then 'wake up' cycle is delayed for specified time - if '...WakeUpDuration' is zero, then 'wake up' cycle completes immediately after initiation - if '...WakeUpDuration' is non-zero, then 'wake up' cycle requires specified time to complete * 'off(4)' - device 'wake up' feature is present but disabled both '...WakeUpDelay' and '...WakeUpDuration' not used * 'notPresent(5)' - device 'wake up' feature NOT present on this host system both '...WakeUpDelay' and '...WakeUpDuration' not used
Status: current Access: read-create
OBJECT-TYPE    
  PresentOnOff  

xcmHrDevPowerWakeUpDelay 1.3.6.1.4.1.253.8.53.6.2.1.13
A device 'wake up' feature delay time, or zero if none, used by system administrators of this device. Usage: The time delay after last 'wake up' trigger event (eg, arrival of a job, some local user action, etc) before the 'wake up' cycle will begin (to power 'standbyMode' in 'xcmHrDevInfoConditions').
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

xcmHrDevPowerWakeUpDuration 1.3.6.1.4.1.253.8.53.6.2.1.14
A device 'wake up' feature duration, or zero if none, used by system administrators of this device. Usage: The time after last 'wake up' initiation before the 'wake up' will complete (to power 'standbyMode' in 'xcmHrDevInfoConditions').
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

xcmHrDevPowerShutdownDelay 1.3.6.1.4.1.253.8.53.6.2.1.15
A device 'shutdown' feature delay time, or zero if none, used by system administrators of this device. Usage: The time delay after last 'shutdown' trigger event (eg, completion of the last 'energy save' cycle to 'sleepMode') before the 'shutdown' cycle will begin (to power 'offMode' in 'xcmHrDevInfoConditions' and 'down' in 'hrDeviceStatus').
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

xcmHrDevPowerShutdownDuration 1.3.6.1.4.1.253.8.53.6.2.1.16
A device 'shutdown' feature duration, or zero if none, used by system administrators of this device. Usage: The time after last 'shutdown' initiation before the 'shutdown' cycle will complete (to power 'offMode' in 'xcmHrDevInfoConditions' and 'down' in 'hrDeviceStatus').
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

xcmHrDevPowerStartupDelay 1.3.6.1.4.1.253.8.53.6.2.1.17
A device 'startup' feature delay time, or zero if none, used by system administrators of this device. Usage: The time delay after last 'startup' trigger event (eg, 'xcmHrDevCalendarCommandRequest' or local user action) before the 'startup' cycle will begin (to power 'readyMode' in 'xcmHrDevInfoConditions' and 'running' in 'hrDeviceStatus').
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

xcmHrDevPowerStartupDuration 1.3.6.1.4.1.253.8.53.6.2.1.18
A device 'startup' feature duration, or zero if none, used by system administrators of this device. Usage: The time after last 'startup' initiation before the 'startup' cycle will complete (to power 'readyMode' in 'xcmHrDevInfoConditions' and 'running' in 'hrDeviceStatus').
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

xcmHrDevTraffic 1.3.6.1.4.1.253.8.53.7
OBJECT IDENTIFIER    

xcmHrDevTrafficTable 1.3.6.1.4.1.253.8.53.7.2
A 'sparse' table containing traffic information objects for installed and (possibly) active devices on this host system, augmenting the basic entries in the 'hrDeviceTable' of the IETF Host Resources MIB (RFC 1514).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    XcmHrDevTrafficEntry

xcmHrDevTrafficEntry 1.3.6.1.4.1.253.8.53.7.2.1
A 'sparse' entry containing traffic information objects for an installed and (possibly) active device on this host system, augmenting a basic entry in the 'hrDeviceTable' of the IETF Host Resources MIB (RFC 1514).
Status: current Access: not-accessible
OBJECT-TYPE    
  XcmHrDevTrafficEntry  

xcmHrDevTrafficRowStatus 1.3.6.1.4.1.253.8.53.7.2.1.1
This object manages the SMIv2 row status of this conceptual row in the 'xcmHrDevTrafficTable'.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

xcmHrDevTrafficInputSupport 1.3.6.1.4.1.253.8.53.7.2.1.2
A device input traffic support management object, used by system administrators of this device. Usage: This object specifies the support present (if any) for device input traffic (I/O). For example, a ROM only supports input traffic (ie, reads). * 'other(1)' - DEPRECATED - shall NOT be used by conforming implementations * 'on(3)' - device 'input I/O' feature is present and enabled and '...InputTimeout' is meaningful - if '...InputTimeout' is zero, then 'input I/O' cycle may proceed for an infinite time - if '...InputTimeout' is non-zero, then 'input I/O' cycle is limited to the specified time * 'off(4)' - device 'input I/O' feature is present but disabled and '...InputTimeout' is ignored * 'notPresent(5)' - device 'input I/O' feature NOT present on this host system and '...InputTimeout' is ignored
Status: current Access: read-create
OBJECT-TYPE    
  PresentOnOff  

xcmHrDevTrafficOutputSupport 1.3.6.1.4.1.253.8.53.7.2.1.3
A device output traffic support management object, used by system administrators of this device. Usage: This object specifies the support present (if any) for device output traffic (I/O). For example, a ROM does NOT support output traffic (ie, writes). * 'other(1)' - DEPRECATED - shall NOT be used by conforming implementations * 'on(3)' - device 'output I/O' feature is present and enabled and '...OutputTimeout' is meaningful - if '...OutputTimeout' is zero, then 'output I/O' cycle may proceed for an infinite time - if '...OutputTimeout' is non-zero, then 'output I/O' cycle is limited to the specified time * 'off(4)' - device 'output I/O' feature is present but disabled and '...OutputTimeout' is ignored * 'notPresent(5)' - device 'output I/O' feature NOT present on this host system and '...OutputTimeout' is ignored
Status: current Access: read-create
OBJECT-TYPE    
  PresentOnOff  

xcmHrDevTrafficInputUnit 1.3.6.1.4.1.253.8.53.7.2.1.4
A device input unit, used by system administrators of this device for input traffic counters. Usage: For example, a disk drive might use 'mediaBlock'. Usage: Thanks to XCMI WG members for stimulating the following discussion. There are three reasonable ways for using the 'xcmHrDevTraffic[Input|Output]Unit' objects: a) 'read-only' and set up by the management agent according to the sole appropriate (fixed) units at time of row creation; b) 'write-once' by the management station, at time of row creation (possibly selecting from among several possible valid units); and c) 'write-many' by the management station (to dynamically request the management agent to 'convert' the 'xcmHrDevTraffic[Input|Output]Count' objects into the appropriate units). Conforming implementations need NOT support more than one of the above three scenarios.
Status: current Access: read-create
OBJECT-TYPE    
  XcmHrDevTrafficUnit  

xcmHrDevTrafficOutputUnit 1.3.6.1.4.1.253.8.53.7.2.1.5
A device output unit, used by system administrators of this device for output traffic counters. Usage: For example, a terminal might use 'textLine'.
Status: current Access: read-create
OBJECT-TYPE    
  XcmHrDevTrafficUnit  

xcmHrDevTrafficInputCount 1.3.6.1.4.1.253.8.53.7.2.1.6
A device input traffic count, used by system administrators and end users of this device. Usage: Although no default value ('DEFVAL' clause) is permitted (by IETF SMIv2) for this counter, conforming host systems shall ALWAYS zero this counter upon conceptual row creation.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xcmHrDevTrafficOutputCount 1.3.6.1.4.1.253.8.53.7.2.1.7
A device output traffic count, used by system administrators and end users of this device. Usage: Although no default value ('DEFVAL' clause) is permitted (by IETF SMIv2) for this counter, conforming host systems shall ALWAYS zero this counter upon conceptual row creation.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xcmHrDevTrafficInputMaxSize 1.3.6.1.4.1.253.8.53.7.2.1.8
A device input maximum size, or zero if infinite, used by system administrators and end users of this device. Usage: It is device specific how (or if) this limit object is used (eg, disk with 'xcmHrDevTrafficInputUnit' of 'mediaBlock' might limit block count of a single disk read to '50').
Status: current Access: read-create
OBJECT-TYPE    
  Cardinal32  

xcmHrDevTrafficOutputMaxSize 1.3.6.1.4.1.253.8.53.7.2.1.9
A device output maximum size, or zero if infinite, used by system administrators and end users of this device. Usage: It is device specific how (or if) this limit object is used (eg, disk with 'xcmHrDevTrafficOutputUnit' of 'mediaBlock' might limit block count of a single disk write to '50').
Status: current Access: read-create
OBJECT-TYPE    
  Cardinal32  

xcmHrDevTrafficInputTimeout 1.3.6.1.4.1.253.8.53.7.2.1.10
A device input traffic timeout (in seconds), or zero if none, used by system administrators of this device. Usage: This object specifies the timeout to be used (if any) for device input traffic (I/O). For example, a disk drive might want to timeout disk reads.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

xcmHrDevTrafficOutputTimeout 1.3.6.1.4.1.253.8.53.7.2.1.11
A device output traffic timeout (in seconds), or zero if none, used by system administrators of this device. Usage: This object specifies the timeout to be used (if any) for device output traffic (I/O). For example, a terminal might want to timeout screen writes.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

xcmHrSystemFault 1.3.6.1.4.1.253.8.53.8
OBJECT IDENTIFIER    

xcmHrSystemFaultTable 1.3.6.1.4.1.253.8.53.8.2
A table of the system faults which have been recorded (logged) on this host system. Usage: Conforming implementations shall ALWAYS ensure that this table contains (up to) a product specific number of the most 'recent' faults on this host system. Usage: Conforming implementations may 'age' older entries out of 'xcmHrSystemFaultTable' (by an algorithm outside the scope of XCMI specifications).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    XcmHrSystemFaultEntry

xcmHrSystemFaultEntry 1.3.6.1.4.1.253.8.53.8.2.1
An entry for a system fault which has been recorded (logged) on this host system.
Status: current Access: not-accessible
OBJECT-TYPE    
  XcmHrSystemFaultEntry  

xcmHrSystemFaultIndex 1.3.6.1.4.1.253.8.53.8.2.1.1
A unique value used by this host system to identify this conceptual row in the 'xcmHrSystemFaultTable'. Usage: Conforming implementations shall NOT 'reuse' values of 'xcmHrSystemFaultIndex' until its' 32-bit value wraps. Even in the case of eventual wrap, the entries shall ALWAYS be strictly sequenced by the associated value of 'xcmHrSystemFaultDate'. Usage: Conforming implementations are strongly encouraged to preserve the last used value of 'xcmHrSystemFaultIndex' across system power cycles.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ordinal32  

xcmHrSystemFaultRowStatus 1.3.6.1.4.1.253.8.53.8.2.1.2
This object is used to create (by management agent) and delete (by management station and/or management agent) individual conceptual rows in the 'xcmHrSystemFaultTable'. Usage: Conforming implementations need NOT support dynamic row deletion (via 'destroy') by remote management stations.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

xcmHrSystemFaultCode 1.3.6.1.4.1.253.8.53.8.2.1.3
Encoded fault code of the system fault which is recorded in this conceptual row in the 'xcmHrSystemFaultTable'.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

xcmHrSystemFaultString 1.3.6.1.4.1.253.8.53.8.2.1.4
Human-readable fault string of the system fault which is recorded in this conceptual row in the 'xcmHrSystemFaultTable'.
Status: current Access: read-only
OBJECT-TYPE    
  XcmFixedLocaleDisplayString Size(0..255)  

xcmHrSystemFaultReferenceOID 1.3.6.1.4.1.253.8.53.8.2.1.5
An (optional) unambiguous system object reference (which MAY include instance suffix information), used by system administrators and end users to qualify this system fault. Usage: Since this system object reference is specified as an object identifier, it may be taken from any IETF, Xerox, third- party, or product-specific MIB, or it may simply be any IETF SMIv2-style 'autonomous type'.
Status: current Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

xcmHrSystemFaultHrDeviceIndex 1.3.6.1.4.1.253.8.53.8.2.1.6
An (optional) device index (ie, value of 'hrDeviceIndex'), used by system administrators and end users to qualify this system fault.
Status: current Access: read-only
OBJECT-TYPE    
  Cardinal32  

xcmHrSystemFaultDate 1.3.6.1.4.1.253.8.53.8.2.1.7
The time stamp for the system fault which is recorded in this conceptual row in the 'xcmHrSystemFaultTable'.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

xcmHrDevCalendar 1.3.6.1.4.1.253.8.53.10
OBJECT IDENTIFIER    

xcmHrDevCalendarTable 1.3.6.1.4.1.253.8.53.10.2
A 'sparse' table containing calendar management objects for installed and (possibly) active devices on this host system, augmenting the basic entries in the 'hrDeviceTable' of the IETF Host Resources MIB (RFC 1514).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    XcmHrDevCalendarEntry

xcmHrDevCalendarEntry 1.3.6.1.4.1.253.8.53.10.2.1
A 'sparse' entry containing calendar management objects for an installed and (possibly) active device on this host system, augmenting a basic entry in the 'hrDeviceTable' of the IETF Host Resources MIB (RFC 1514).
Status: current Access: not-accessible
OBJECT-TYPE    
  XcmHrDevCalendarEntry  

xcmHrDevCalendarDayOfWeek 1.3.6.1.4.1.253.8.53.10.2.1.1
The day of week when the command specified in this conceptual row in the 'xcmHrDevCalendarTable' shall be invoked.
Status: current Access: not-accessible
OBJECT-TYPE    
  XcmHrDevCalendarDayOfWeek  

xcmHrDevCalendarTimeOfDay 1.3.6.1.4.1.253.8.53.10.2.1.2
The time of day when the command specified in this conceptual row in the 'xcmHrDevCalendarTable' shall be invoked, specified as hours (0..23) multiplied by 100, added to minutes (0..59), added to a constant bias of 10000 (avoids an index value of zero in 'xcmHrDevCalendarTimeOfDay').
Status: current Access: not-accessible
OBJECT-TYPE    
  XcmHrDevCalendarTimeOfDay  

xcmHrDevCalendarRowStatus 1.3.6.1.4.1.253.8.53.10.2.1.3
This object manages the SMIv2 row status of this conceptual row in the 'xcmHrDevCalendarTable'.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

xcmHrDevCalendarExplicitDate 1.3.6.1.4.1.253.8.53.10.2.1.4
The explicit date when the command specified in this conceptual row in the 'xcmHrDevCalendarTable' shall be invoked. Usage: When 'xcmHrDevCalendarExplicitDate' is used, the value of 'xcmHrDevCalendarDayOfWeek' shall be 'everyDay' and the value of 'xcmHrDevCalendarTimeOfDay' shall be arbitrary (to provide uniqueness for this conceptual row).
Status: current Access: read-create
OBJECT-TYPE    
  DateAndTime  

xcmHrDevCalendarCommandRequest 1.3.6.1.4.1.253.8.53.10.2.1.5
The management command request specified in this conceptual row in the 'xcmHrDevCalendarTable', which shall be invoked based on 'xcmHrDevCalendarDayOfWeek', 'xcmHrDevCalendarTimeOfDay', and (optionally) 'xcmHrDevCalendarExplicitDate'.
Status: current Access: read-create
OBJECT-TYPE    
  XcmHrDevMgmtCommandRequest  

xcmHrDevCalendarCommandData 1.3.6.1.4.1.253.8.53.10.2.1.6
The management command data specified in this conceptual row in the 'xcmHrDevCalendarTable', which shall be invoked based on 'xcmHrDevCalendarDayOfWeek', 'xcmHrDevCalendarTimeOfDay', and (optionally) 'xcmHrDevCalendarExplicitDate'.
Status: current Access: read-create
OBJECT-TYPE    
  XcmHrDevMgmtCommandData  

xcmHrSWRun 1.3.6.1.4.1.253.8.53.11
OBJECT IDENTIFIER    

xcmHrSWRunTable 1.3.6.1.4.1.253.8.53.11.2
A 'sparse' table containing software info objects for loaded and (possibly) active software on this host system, augmenting the basic entries in the 'hrSWRunTable' of the IETF Host Resources MIB (RFC 1514).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    XcmHrSWRunEntry

xcmHrSWRunEntry 1.3.6.1.4.1.253.8.53.11.2.1
A 'sparse' entry containing software info objects for loaded and (possibly) active software on this host system, augmenting a basic entry in the 'hrSWRunTable' of the IETF Host Resources MIB (RFC 1514).
Status: current Access: not-accessible
OBJECT-TYPE    
  XcmHrSWRunEntry  

xcmHrSWRunRowStatus 1.3.6.1.4.1.253.8.53.11.2.1.1
This object manages the SMIv2 row status of this conceptual row in the 'xcmHrSWRunTable' and ALSO manages the row status of the associated conceptual row in the 'hrSWRunTable' of the IETF Host Resources MIB.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

xcmHrSWRunAdminName 1.3.6.1.4.1.253.8.53.11.2.1.2
Human-readable software name, used by system administrators and end users to identify this software for systems management. Usage: This software name shall be the one normally used in a CLI/GUI/API for control of this software. Note: The 'hrSWRunName' object in 'hrSWRunTable' of the IETF Host Resources MIB (RFC 1514) has MANDATORY content of 'manufacturer, revision, and the name by which [the software] is commonly known'. Thus, conforming implementations shall NOT set a 'simple name' into 'hrSWRunName'. Therefore, this 'xcmHrSWRunAdminName' object is needed for management.
Status: current Access: read-create
OBJECT-TYPE    
  XcmFixedLocaleDisplayString Size(0..255)  

xcmHrSWRunXStatus 1.3.6.1.4.1.253.8.53.11.2.1.3
An extended software status, used by system administrators and end users of this software (here, read 'state' for 'status'). Note: This extended software status is present for future extensions.
Status: current Access: read-only
OBJECT-TYPE    
  XcmHrSWRunXStatus  

xcmHrSWRunRowCreateDate 1.3.6.1.4.1.253.8.53.11.2.1.4
The date and time when this conceptual row was created.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

xcmHrSWRunPhysicalDeviceIndex 1.3.6.1.4.1.253.8.53.11.2.1.5
The value of 'hrDeviceIndex' corresponding to the first associated conceptual row in the 'hrDeviceTable' representing a supported and (possibly) ready 'physical' device, which has 'xcmHrDevInfoRealization' of 'physical' or 'logicalAndPhysical', or zero, if there is no supported and subordinate 'physical' device associated with this row (ie, this running software).
Status: current Access: read-create
OBJECT-TYPE    
  Cardinal32  

xcmHrSWRunLogicalDeviceIndex 1.3.6.1.4.1.253.8.53.11.2.1.6
The value of 'hrDeviceIndex' corresponding to the first associated conceptual row in the 'hrDeviceTable' representing a supported and (possibly) ready 'logical' device, which has 'xcmHrDevInfoRealization' of 'logical' or 'logicalAndPhysical', or zero, if there is no supported and subordinate 'logical' device associated with this row (ie, this running software).
Status: current Access: read-create
OBJECT-TYPE    
  Cardinal32  

xcmHrSWRunNextIndex 1.3.6.1.4.1.253.8.53.11.2.1.7
The value of 'hrSWRunIndex' corresponding to the next associated row in the 'hrSWRunTable', or zero if this is the last associated conceptual row in a given set.
Status: current Access: read-create
OBJECT-TYPE    
  Cardinal32  

xcmHrSWRunPreviousIndex 1.3.6.1.4.1.253.8.53.11.2.1.8
The value of 'hrSWRunIndex' corresponding to the previous associated row in the 'hrSWRunTable', or zero if this is the first associated conceptual row in a given set.
Status: current Access: read-create
OBJECT-TYPE    
  Cardinal32  

xcmHrSWInstalled 1.3.6.1.4.1.253.8.53.12
OBJECT IDENTIFIER    

xcmHrSWInstalledTable 1.3.6.1.4.1.253.8.53.12.2
A 'sparse' table containing software info objects for installed and (possibly) active software on this host system, augmenting the basic entries in the 'hrSWInstalledTable' of the IETF Host Resources MIB (RFC 1514).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    XcmHrSWInstalledEntry

xcmHrSWInstalledEntry 1.3.6.1.4.1.253.8.53.12.2.1
A 'sparse' entry containing software info objects for installed and (possibly) active software on this host system, augmenting a basic entry in the 'hrSWInstalledTable' of the IETF Host Resources MIB (RFC 1514).
Status: current Access: not-accessible
OBJECT-TYPE    
  XcmHrSWInstalledEntry  

xcmHrSWInstalledRowStatus 1.3.6.1.4.1.253.8.53.12.2.1.1
This object manages the SMIv2 row status of this conceptual row in the 'xcmHrSWInstalledTable' and ALSO manages the row status of the associated conceptual row in the 'hrSWInstalledTable' of the IETF Host Resources MIB (RFC 1514).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

xcmHrSWInstalledAdminName 1.3.6.1.4.1.253.8.53.12.2.1.2
Human-readable software name, used by system administrators and end users to identify this software for systems management. Usage: This software name shall be the one normally used in a CLI/GUI/API for control of this software. Note: The 'hrSWInstalledName' object in 'hrSWInstalledTable' of the IETF Host Resources MIB (RFC 1514) has MANDATORY content of 'manufacturer, revision, and the name by which [the software] is commonly known'. Thus, conforming implementations shall NOT set a 'simple name' into 'hrSWInstalledName'. Therefore, this 'xcmHrSWInstalledAdminName' object is needed for management.
Status: current Access: read-create
OBJECT-TYPE    
  XcmFixedLocaleDisplayString Size(0..255)  

xcmHrSWInstalledXStatus 1.3.6.1.4.1.253.8.53.12.2.1.3
An extended software status, used by system administrators and end users of this software (here, read 'state' for 'status'). Note: This extended software status is present for future extensions.
Status: current Access: read-only
OBJECT-TYPE    
  XcmHrSWRunXStatus  

xcmHrSWInstalledRowCreateDate 1.3.6.1.4.1.253.8.53.12.2.1.4
The date and time when this conceptual row was created.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

xcmHrSWInstalledPhysicalIndex 1.3.6.1.4.1.253.8.53.12.2.1.5
The value of 'hrDeviceIndex' corresponding to the first associated conceptual row in the 'hrDeviceTable' representing a supported and (possibly) ready 'physical' device, which has 'xcmHrDevInfoRealization' of 'physical' or 'logicalAndPhysical', or zero, if there is no supported and subordinate 'physical' device associated with this row (ie, this installed software).
Status: current Access: read-create
OBJECT-TYPE    
  Cardinal32  

xcmHrSWInstalledLogicalIndex 1.3.6.1.4.1.253.8.53.12.2.1.6
The value of 'hrDeviceIndex' corresponding to the first associated conceptual row in the 'hrDeviceTable' representing a supported and (possibly) ready 'logical' device, which has 'xcmHrDevInfoRealization' of 'logical' or 'logicalAndPhysical', or zero, if there is no supported and subordinate 'logical' device associated with this row (ie, this installed software).
Status: current Access: read-create
OBJECT-TYPE    
  Cardinal32  

xcmHrSWInstalledNextIndex 1.3.6.1.4.1.253.8.53.12.2.1.7
The value of 'hrSWInstalledIndex' corresponding to the next associated row in the 'hrSWInstalledTable', or zero if this is the last associated conceptual row in a given set.
Status: current Access: read-create
OBJECT-TYPE    
  Cardinal32  

xcmHrSWInstalledPreviousIndex 1.3.6.1.4.1.253.8.53.12.2.1.8
The value of 'hrSWInstalledIndex' corresponding to the previous associated row in the 'hrSWInstalledTable', or zero if this is the first associated conceptual row in a given set.
Status: current Access: read-create
OBJECT-TYPE    
  Cardinal32  

xcmHrDevDetail 1.3.6.1.4.1.253.8.53.13
OBJECT IDENTIFIER    

xcmHrDevDetailTable 1.3.6.1.4.1.253.8.53.13.2
A 'sparse' table containing device detail information for installed and (possibly) active devices on this host system, augmenting the basic entries in the 'hrDeviceTable' of the IETF Host Resources MIB (RFC 1514). Usage: UNLIKE the 'xcmGenOptionTable' in the XCMI General MIB (which is a unique exception), this table of 'dictionary-based' device details is used with DIRECT create/update operations.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    XcmHrDevDetailEntry

xcmHrDevDetailEntry 1.3.6.1.4.1.253.8.53.13.2.1
A 'sparse' entry containing device detail information for an installed and (possibly) active device on this host system, augmenting a basic entry in the 'hrDeviceTable' of the IETF Host Resources MIB (RFC 1514). Usage: An entry in this table may be used to store specialized information for a device, such as 'lifetime' information for a CRU ('customer replaceable unit'), eg, a paper tray feed head.
Status: current Access: not-accessible
OBJECT-TYPE    
  XcmHrDevDetailEntry  

xcmHrDevDetailType 1.3.6.1.4.1.253.8.53.13.2.1.1
The type of the device detail information specified in this conceptual row in the 'xcmHrDevDetailTable'.
Status: current Access: not-accessible
OBJECT-TYPE    
  XcmHrDevDetailType  

xcmHrDevDetailIndex 1.3.6.1.4.1.253.8.53.13.2.1.2
A unique value used by this host system to identify this conceptual row in the 'xcmHrDevDetailTable', OR a common value shared across a set of related conceptual rows (with different values of 'xcmHrDevDetailType'. Usage: For device detail types which are single-valued, this index shall be used to correlate related single-valued details. Usage: For device detail types which are multi-valued, this index shall be used to enumerate lists of multi-valued details.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ordinal32  

xcmHrDevDetailRowStatus 1.3.6.1.4.1.253.8.53.13.2.1.3
This object manages the SMIv2 row status of this conceptual row in the 'xcmHrDevDetailTable'.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

xcmHrDevDetailUnitClass 1.3.6.1.4.1.253.8.53.13.2.1.4
The value unit class of the detail information specified in this conceptual row in the 'xcmHrDevDetailTable'. Usage: Used to select a textual convention for specifying the value unit of this device detail. Usage: The 'xcmHrDevDetail[UnitClass|Class]' objects are used to specify the value syntax AND the value unit of the 'xcmHrDevDetail[Integer|OID|String]' value objects.
Status: current Access: read-create
OBJECT-TYPE    
  XcmHrDevDetailUnitClass  

xcmHrDevDetailUnit 1.3.6.1.4.1.253.8.53.13.2.1.5
The value unit of the detail information specified in this conceptual row in the 'xcmHrDevDetailTable'. Usage: Used to select an enumerated choice from a textual convention to specify the value unit of this device detail. Usage: The 'xcmHrDevDetail[UnitClass|Class]' objects are used to specify the value syntax AND the value unit of the 'xcmHrDevDetail[Integer|OID|String]' value objects.
Status: current Access: read-create
OBJECT-TYPE    
  Cardinal32  

xcmHrDevDetailValueInteger 1.3.6.1.4.1.253.8.53.13.2.1.6
A device detail value integer, used by system administrators and end users to specify the current value for a device detail with a base value syntax of 'INTEGER'.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

xcmHrDevDetailValueOID 1.3.6.1.4.1.253.8.53.13.2.1.7
A device detail value OID (object identifier), used by system administrators and end users to specify the current value for a device detail with a base value syntax of 'OBJECT IDENTIFIER'.
Status: current Access: read-create
OBJECT-TYPE    
  OBJECT IDENTIFIER  

xcmHrDevDetailValueString 1.3.6.1.4.1.253.8.53.13.2.1.8
A device detail value string, used by system administrators and end users to specify the current value for a device detail with a base value syntax of 'OCTET STRING'.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

xcmHrDevDetailV1EventOID 1.3.6.1.4.1.253.8.53.13.1
The value of the enterprise-specific OID in an SNMPv1 trap sent whenever a device detail usage or time limit is reached. See SNMPv2 trap definition 'xcmHrDevDetailV2Event' below for 'special semantics'.
Status: current Access: read-create
OBJECT-IDENTITY    

xcmHrDevDetailV2EventPrefix 1.3.6.1.4.1.253.8.53.13.1.0
OBJECT IDENTIFIER    

xcmHrDevDetailV2Event 1.3.6.1.4.1.253.8.53.13.1.0.1
This trap is sent when 'xcmHrDevDetailIndex' is shared between a counter detail and a limit detail which are specified in 'xcmHrDevDetailValueInteger', OR when 'xcmHrDevDetailValueString' specifies a trigger date. Note: The variable-bindings of this trap have been chosen to specify a complete device status change while keeping trap messages reasonably concise (generally a few hundred octets at most). This notification has the following special semantics: o The detail's 'hrDeviceIndex' value, the detail's 'xcmHrDevDetailType' value, and the detail's 'xcmHrDevDetailIndex' value shall ALWAYS be appended to this trap object ID, as a BER binary OID suffix. This trap OID qualifier allows device management/monitoring applications to limit the alerts they receive to ones generated by device details of interest.
Status: current Access: read-create
NOTIFICATION-TYPE    

xcmHrStorage 1.3.6.1.4.1.253.8.53.14
OBJECT IDENTIFIER    

xcmHrStorageTable 1.3.6.1.4.1.253.8.53.14.2
A 'sparse' table containing storage info objects for 'logical' or 'physical' storage elements on this host system, augmenting the basic entries in the 'hrStorageTable' of the IETF Host Resources MIB (RFC 1514).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    XcmHrStorageEntry

xcmHrStorageEntry 1.3.6.1.4.1.253.8.53.14.2.1
A 'sparse' entry containing storage info objects for a 'logical' or 'physical' storage element on this host system, augmenting a basic entry in the 'hrStorageTable' of the IETF Host Resources MIB (RFC 1514).
Status: current Access: not-accessible
OBJECT-TYPE    
  XcmHrStorageEntry  

xcmHrStorageRowStatus 1.3.6.1.4.1.253.8.53.14.2.1.1
This object manages the SMIv2 row status of this conceptual row in the 'xcmHrStorageTable' and ALSO manages the row status of the associated conceptual row in the 'hrStorageTable' of the IETF Host Resources MIB (RFC 1514).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

xcmHrStorageRealization 1.3.6.1.4.1.253.8.53.14.2.1.2
An extended storage type (or storage 'realization'), used by system administrators and end users of this storage. Usage: The use of either 'other' or 'unknown' is uninformative and should be avoided by conforming implementations.
Status: current Access: read-create
OBJECT-TYPE    
  XcmHrStorageRealization  

xcmHrStorageStatus 1.3.6.1.4.1.253.8.53.14.2.1.3
A storage status, used by system administrators and end users of this storage (here, read 'state' for 'status'). Usage: Conforming implementations shall NOT 'bubble up' status from 'physical' storage to associated 'logical' storage. All storage shall ALWAYS report its own status ONLY.
Status: current Access: read-only
OBJECT-TYPE    
  XcmHrDevInfoStatus  

xcmHrStorageProductDeviceIndex 1.3.6.1.4.1.253.8.53.14.2.1.4
The value of 'hrDeviceIndex' corresponding to the product associated conceptual row in the 'hrDeviceTable' representing the product (container) device (eg, of type 'hrDevicePrinter'), which uses this storage.
Status: current Access: read-create
OBJECT-TYPE    
  Cardinal32  

xcmHrStoragePlatformDeviceIndex 1.3.6.1.4.1.253.8.53.14.2.1.5
The value of 'hrDeviceIndex' corresponding to the platform associated conceptual row in the 'hrDeviceTable' representing the CPU device (of type 'hrDeviceProcessor'), which manages this storage.
Status: current Access: read-create
OBJECT-TYPE    
  Cardinal32  

xcmHrStoragePagingDeviceIndex 1.3.6.1.4.1.253.8.53.14.2.1.6
The value of 'hrDeviceIndex' corresponding to the paging associated conceptual row in the 'hrDeviceTable' representing the paging device (usually of type 'hrDeviceDiskStorage'), which provides secondary storage for swapping of this storage.
Status: current Access: read-create
OBJECT-TYPE    
  Cardinal32  

xcmHrStorageMatchingDeviceIndex 1.3.6.1.4.1.253.8.53.14.2.1.7
The value of 'hrDeviceIndex' corresponding to the matching associated conceptual row in the 'hrDeviceTable' representing the matching device (eg, of type 'hrDeviceDiskStorage'), which corresponds to this storage.
Status: current Access: read-create
OBJECT-TYPE    
  Cardinal32  

xcmHrStorageSWRunIndex 1.3.6.1.4.1.253.8.53.14.2.1.8
The value of 'hrSWRunIndex' corresponding to the superior associated conceptual row in the 'hrSWRunTable' representing the running software which manages this storage.
Status: current Access: read-create
OBJECT-TYPE    
  Cardinal32  

xcmHrStorageSWInstalledIndex 1.3.6.1.4.1.253.8.53.14.2.1.9
The value of 'hrSWInstalledIndex' corresponding to the superior associated conceptual row in the 'hrSWInstalledTable' representing the installed software which manages this storage.
Status: current Access: read-create
OBJECT-TYPE    
  Cardinal32  

xcmHrStorageNextIndex 1.3.6.1.4.1.253.8.53.14.2.1.10
The value of 'hrStorageIndex' corresponding to: a) the next associated row in the 'hrStorageTable'; or b) zero if this is the last associated conceptual row in a given set; or c) zero if this conceptual row is NOT part of a set.
Status: current Access: read-create
OBJECT-TYPE    
  Cardinal32  

xcmHrStoragePreviousIndex 1.3.6.1.4.1.253.8.53.14.2.1.11
The value of 'hrStorageIndex' corresponding to: a) the previous associated row in the 'hrStorageTable'; or b) zero if this is the first associated conceptual row in a given set; or c) zero if this conceptual row is NOT part of a set.
Status: current Access: read-create
OBJECT-TYPE    
  Cardinal32  

xcmHrStoragePhysicalIndex 1.3.6.1.4.1.253.8.53.14.2.1.12
The value of 'hrStorageIndex' corresponding to the directly associated conceptual row in the 'hrStorageTable' representing: a) the first underlying 'physical' storage (if any), if this row has 'xcmHrStorageRealization' of 'logical...'; or b) the first subordinate 'physical' storage (if any), if this row has 'xcmHrStorageRealization' of 'physical...'; or c) zero if there is no underlying or subordinate 'physical' storage associated with this row (ie, this storage).
Status: current Access: read-create
OBJECT-TYPE    
  Cardinal32  

xcmHrStorageDetail 1.3.6.1.4.1.253.8.53.15
OBJECT IDENTIFIER    

xcmHrStorageDetailTable 1.3.6.1.4.1.253.8.53.15.2
A 'sparse' table containing storage detail information for 'logical' or 'physical' storage elements on this host system, augmenting a basic entry in the 'hrStorageTable' of the IETF Host Resources MIB (RFC 1514). Usage: UNLIKE the 'xcmGenOptionTable' in the XCMI General MIB (which is a unique exception), this table of 'dictionary-based' storage details is used with DIRECT create/update operations.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    XcmHrStorageDetailEntry

xcmHrStorageDetailEntry 1.3.6.1.4.1.253.8.53.15.2.1
A 'sparse' entry containing storage detail information for a 'logical' or 'physical' storage element on this host system, augmenting a basic entry in the 'hrStorageTable' of the IETF Host Resources MIB (RFC 1514).
Status: current Access: not-accessible
OBJECT-TYPE    
  XcmHrStorageDetailEntry  

xcmHrStorageDetailType 1.3.6.1.4.1.253.8.53.15.2.1.1
The type of the storage detail information specified in this conceptual row in the 'xcmHrStorageDetailTable'.
Status: current Access: not-accessible
OBJECT-TYPE    
  XcmHrStorageDetailType  

xcmHrStorageDetailIndex 1.3.6.1.4.1.253.8.53.15.2.1.2
A unique value used by this host system to identify this conceptual row in the 'xcmHrStorageDetailTable', OR a common value shared across a set of related conceptual rows (with different values of 'xcmHrStorageDetailType'. Usage: For storage detail types which are single-valued, this index shall be used to correlate related single-valued details. Usage: For storage detail types which are multi-valued, this index shall be used to enumerate lists of multi-valued details.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ordinal32  

xcmHrStorageDetailRowStatus 1.3.6.1.4.1.253.8.53.15.2.1.3
This object manages the SMIv2 row status of this conceptual row in the 'xcmHrStorageDetailTable'.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

xcmHrStorageDetailUnitClass 1.3.6.1.4.1.253.8.53.15.2.1.4
The value unit class of the detail information specified in this conceptual row in the 'xcmHrStorageDetailTable'. Usage: Used to select a textual convention for specifying the value unit of this storage detail. Usage: The 'xcmHrStorageDetail[UnitClass|Class]' objects are used to specify the value syntax AND the value unit of the 'xcmHrStorageDetail[Integer|OID|String]' value objects.
Status: current Access: read-create
OBJECT-TYPE    
  XcmHrDevDetailUnitClass  

xcmHrStorageDetailUnit 1.3.6.1.4.1.253.8.53.15.2.1.5
The value unit of the detail information specified in this conceptual row in the 'xcmHrStorageDetailTable'. Usage: Used to select an enumerated choice from a textual convention to specify the value unit of this storage detail. Usage: The 'xcmHrStorageDetail[UnitClass|Class]' objects are used to specify the value syntax AND the value unit of the 'xcmHrStorageDetail[Integer|OID|String]' value objects.
Status: current Access: read-create
OBJECT-TYPE    
  Cardinal32  

xcmHrStorageDetailValueInteger 1.3.6.1.4.1.253.8.53.15.2.1.6
A storage detail value integer, used by system administrators and end users to specify the current value for a storage detail with a base value syntax of 'INTEGER'.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

xcmHrStorageDetailValueOID 1.3.6.1.4.1.253.8.53.15.2.1.7
A storage detail value OID (object identifier), used by system administrators and end users to specify the current value for a storage detail with a base value syntax of 'OBJECT IDENTIFIER'.
Status: current Access: read-create
OBJECT-TYPE    
  OBJECT IDENTIFIER  

xcmHrStorageDetailValueString 1.3.6.1.4.1.253.8.53.15.2.1.8
A storage detail value string, used by system administrators and end users to specify the current value for a storage detail with a base value syntax of 'OCTET STRING'.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

xcmHrDevCover 1.3.6.1.4.1.253.8.53.16
OBJECT IDENTIFIER    

xcmHrDevCoverTable 1.3.6.1.4.1.253.8.53.16.2
A 'sparse' table containing cover and/or interlock info for installed and (possibly) active devices on this host system, augmenting the basic entries in the 'hrDeviceTable' of the IETF Host Resources MIB (RFC 1514).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    XcmHrDevCoverEntry

xcmHrDevCoverEntry 1.3.6.1.4.1.253.8.53.16.2.1
A 'sparse' entry containing cover and/or interlock info for an installed and (possibly) active device on this host system, augmenting a basic entry in the 'hrDeviceTable' of the IETF Host Resources MIB (RFC 1514).
Status: current Access: not-accessible
OBJECT-TYPE    
  XcmHrDevCoverEntry  

xcmHrDevCoverIndex 1.3.6.1.4.1.253.8.53.16.2.1.1
A unique value used by this host system to identify this conceptual row in the 'xcmHrDevCoverTable'.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ordinal32  

xcmHrDevCoverRowStatus 1.3.6.1.4.1.253.8.53.16.2.1.2
This object manages the SMIv2 row status of this conceptual row in the 'xcmHrDevCoverTable'.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

xcmHrDevCoverName 1.3.6.1.4.1.253.8.53.16.2.1.3
Human-readable name of this device cover or interlock specified in this conceptual row in the 'xcmHrDevCoverTable'. Usage: This name shall be locally unambiguous (if specified) on this managed host system and shall be the one normally used in a CLI/GUI/API for identification of this device cover or interlock (eg, 'Cover1'). Usage: The IETF Printer MIB (RFC 1759) combines the name of a device cover or device interlock with the description, in one object - 'xcmHrDevCover[Name|Description]' add clarity.
Status: current Access: read-create
OBJECT-TYPE    
  XcmFixedLocaleDisplayString Size(0..255)  

xcmHrDevCoverDescription 1.3.6.1.4.1.253.8.53.16.2.1.4
Human-readable description of this device cover or interlock specified in this conceptual row in the 'xcmHrDevCoverTable'. Usage: This description may contain the manufacturer's name, the color, the physical location, etc, of this device cover or interlock (eg, 'Top front blue cover'). Usage: The IETF Printer MIB (RFC 1759) combines the name of a device cover or device interlock with the description, in one object - 'xcmHrDevCover[Name|Description]' add clarity.
Status: current Access: read-create
OBJECT-TYPE    
  XcmFixedLocaleDisplayString Size(0..255)  

xcmHrDevCoverTypeCover 1.3.6.1.4.1.253.8.53.16.2.1.5
The type of the device cover or interlock specified in this conceptual row in the 'xcmHrDevCoverTable'. * 'true' - this is a device cover conceptual row; * 'false' - this is a device interlock conceptual row. Usage: The IETF Printer MIB (RFC 1759) combines the identity of cover versus interlock with the status of open versus closed, in one object - 'xcmHrDevCover[TypeCover|StatusOpen]' add clarity.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

xcmHrDevCoverStatusOpen 1.3.6.1.4.1.253.8.53.16.2.1.6
The status of the device cover or interlock specified in this conceptual row in the 'xcmHrDevCoverTable'. * 'true' - this cover/interlock is currently open; * 'false' - this cover/interlock is currently closed. Usage: The IETF Printer MIB (RFC 1759) combines the choice of cover versus interlock with the status of open versus closed, in one object - 'xcmHrDevCover[TypeCover|StatusOpen]' add clarity.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

xcmHrMIBConformance 1.3.6.1.4.1.253.8.53.2
OBJECT IDENTIFIER    

xcmHrMIBGroups 1.3.6.1.4.1.253.8.53.2.2
OBJECT IDENTIFIER    

xcmHrMIBCompliance 1.3.6.1.4.1.253.8.53.2.3
The compliance statements for SNMP management agents that implement the Host Resources Extensions MIB.
Status: current Access: read-only
MODULE-COMPLIANCE    

xcmHrGeneralGroup 1.3.6.1.4.1.253.8.53.2.2.9
The Host Resources Extensions MIB General Group
Status: current Access: read-only
OBJECT-GROUP    

xcmHrDevInfoGroup 1.3.6.1.4.1.253.8.53.2.2.3
The Host Resources Extensions MIB Device Info Group
Status: current Access: read-only
OBJECT-GROUP    

xcmHrDevHelpGroup 1.3.6.1.4.1.253.8.53.2.2.4
The Host Resources Extensions MIB Device Help Group
Status: current Access: read-only
OBJECT-GROUP    

xcmHrDevMgmtGroup 1.3.6.1.4.1.253.8.53.2.2.5
The Host Resources Extensions MIB Device Mgmt Group
Status: current Access: read-only
OBJECT-GROUP    

xcmHrDevPowerGroup 1.3.6.1.4.1.253.8.53.2.2.6
The Host Resources Extensions MIB Device Power Group
Status: current Access: read-only
OBJECT-GROUP    

xcmHrDevTrafficGroup 1.3.6.1.4.1.253.8.53.2.2.7
The Host Resources Extensions MIB Device Traffic Group
Status: current Access: read-only
OBJECT-GROUP    

xcmHrSystemFaultGroup 1.3.6.1.4.1.253.8.53.2.2.8
The Host Resources Extensions MIB System Fault Group
Status: current Access: read-only
OBJECT-GROUP    

xcmHrDevCalendarGroup 1.3.6.1.4.1.253.8.53.2.2.10
The Host Resources Extensions MIB Device Calendar Group
Status: current Access: read-only
OBJECT-GROUP    

xcmHrSWRunGroup 1.3.6.1.4.1.253.8.53.2.2.11
The Host Resources Extensions MIB Software Running Ext Group
Status: current Access: read-only
OBJECT-GROUP    

xcmHrSWInstalledGroup 1.3.6.1.4.1.253.8.53.2.2.12
The Host Resources Extensions MIB Software Installed Ext Group
Status: current Access: read-only
OBJECT-GROUP    

xcmHrDevDetailGroup 1.3.6.1.4.1.253.8.53.2.2.13
The Host Resources Extensions MIB Device Detail Group
Status: current Access: read-only
OBJECT-GROUP    

xcmHrStorageGroup 1.3.6.1.4.1.253.8.53.2.2.14
The Host Resources Extensions MIB Storage Ext Group
Status: current Access: read-only
OBJECT-GROUP    

xcmHrStorageDetailGroup 1.3.6.1.4.1.253.8.53.2.2.15
The Host Resources Extensions MIB Storage Detail Group
Status: current Access: read-only
OBJECT-GROUP    

xcmHrDevCoverGroup 1.3.6.1.4.1.253.8.53.2.2.16
The Host Resources Extensions MIB Device Cover Group
Status: current Access: read-only
OBJECT-GROUP