XEROX-COMMS-ENGINE-MIB

File: XEROX-COMMS-ENGINE-MIB.mib (94381 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
HOST-RESOURCES-MIB XEROX-COMMON-MIB XEROX-GENERAL-TC
XEROX-HOST-RESOURCES-EXT-TC XEROX-COMMS-ENGINE-TC

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
Counter32 Gauge32 RowStatus
TruthValue DateAndTime MODULE-COMPLIANCE
OBJECT-GROUP ProductID hrDeviceIndex
xeroxCommonMIB Ordinal32 Cardinal32
XcmFixedLocaleDisplayString XcmGenSNMPv2ErrorStatus xcmGenZeroDotZero
XcmHrDevTrafficUnit XcmCommsEngineGroupSupport XcmCommsMgmtCommandRequest
XcmCommsMgmtCommandData XcmCommsMgmtState XcmCommsMgmtConditions
XcmCommsStackPosition XcmCommsStackExtPurpose XcmCommsStackExtRole
XcmCommsStackExtSuite XcmCommsStackExtSuiteVersion XcmCommsStackExtLayer
XcmCommsStackExtProtocol XcmCommsAddressExtForm XcmCommsAddressExtScope
XcmCommsAddressExtFanout

Defined Types

XcmCommsEngineEntry  
SEQUENCE    
  xcmCommsEngineRowStatus RowStatus
  xcmCommsEngineName XcmFixedLocaleDisplayString
  xcmCommsEngineStackLast Cardinal32
  xcmCommsEngineMuxLast Cardinal32
  xcmCommsEngineAddressLast Cardinal32
  xcmCommsEngineMgmtLast Cardinal32
  xcmCommsEngineGroupSupport XcmCommsEngineGroupSupport
  xcmCommsEngineCreateSupport XcmCommsEngineGroupSupport
  xcmCommsEngineUpdateSupport XcmCommsEngineGroupSupport

XcmCommsEngineExtEntry  
SEQUENCE    
  xcmCommsEngineExtRowStatus RowStatus
  xcmCommsEngineExtState XcmCommsMgmtState
  xcmCommsEngineExtConditions XcmCommsMgmtConditions
  xcmCommsEngineExtVersionID ProductID
  xcmCommsEngineExtVersionDate DateAndTime
  xcmCommsEngineExtMgmtIndex Cardinal32
  xcmCommsEngineExtOwnerOID OBJECT IDENTIFIER

XcmCommsStackEntry  
SEQUENCE    
  xcmCommsStackIndex Ordinal32
  xcmCommsStackRowStatus RowStatus
  xcmCommsStackTypeOID OBJECT IDENTIFIER
  xcmCommsStackName XcmFixedLocaleDisplayString
  xcmCommsStackPosition XcmCommsStackPosition
  xcmCommsStackLowerStackIndex Cardinal32
  xcmCommsStackUpperStackIndex Cardinal32
  xcmCommsStackAddressIndex Cardinal32
  xcmCommsStackOptionIndex Cardinal32
  xcmCommsStackLowerMuxIndex Cardinal32
  xcmCommsStackUpperMuxIndex Cardinal32

XcmCommsStackExtEntry  
SEQUENCE    
  xcmCommsStackExtRowStatus RowStatus
  xcmCommsStackExtState XcmCommsMgmtState
  xcmCommsStackExtConditions XcmCommsMgmtConditions
  xcmCommsStackExtPurpose XcmCommsStackExtPurpose
  xcmCommsStackExtRole XcmCommsStackExtRole
  xcmCommsStackExtSuite XcmCommsStackExtSuite
  xcmCommsStackExtSuiteVersion XcmCommsStackExtSuiteVersion
  xcmCommsStackExtLayer XcmCommsStackExtLayer
  xcmCommsStackExtProtocol XcmCommsStackExtProtocol
  xcmCommsStackExtMgmtIndex Cardinal32
  xcmCommsStackExtOwnerOID OBJECT IDENTIFIER

XcmCommsStackXrefEntry  
SEQUENCE    
  xcmCommsStackXrefRowStatus RowStatus
  xcmCommsStackXrefLayerMgmtIndex Cardinal32
  xcmCommsStackXrefLayerSecIndex Cardinal32
  xcmCommsStackXrefLayerIWUIndex Cardinal32
  xcmCommsStackXrefHrSWRunIndex Cardinal32
  xcmCommsStackXrefHrSWInsIndex Cardinal32
  xcmCommsStackXrefIfIndex Cardinal32
  xcmCommsStackXrefHrCommDevIndex Cardinal32

XcmCommsMuxEntry  
SEQUENCE    
  xcmCommsMuxIndex Ordinal32
  xcmCommsMuxRowStatus RowStatus
  xcmCommsMuxNextIndex Cardinal32
  xcmCommsMuxPreviousIndex Cardinal32
  xcmCommsMuxOptionIndex Cardinal32
  xcmCommsMuxBaseStackIndex Ordinal32
  xcmCommsMuxAdjacentStackIndex Ordinal32

XcmCommsMuxExtEntry  
SEQUENCE    
  xcmCommsMuxExtRowStatus RowStatus
  xcmCommsMuxExtState XcmCommsMgmtState
  xcmCommsMuxExtConditions XcmCommsMgmtConditions
  xcmCommsMuxExtMgmtIndex Cardinal32
  xcmCommsMuxExtAddressIndex Cardinal32
  xcmCommsMuxExtOwnerOID OBJECT IDENTIFIER

XcmCommsAddressEntry  
SEQUENCE    
  xcmCommsAddressIndex Ordinal32
  xcmCommsAddressRowStatus RowStatus
  xcmCommsAddressTypeOID OBJECT IDENTIFIER
  xcmCommsAddressUserRole Integer32
  xcmCommsAddressName XcmFixedLocaleDisplayString
  xcmCommsAddressCanonical OCTET STRING
  xcmCommsAddressNextIndex Cardinal32
  xcmCommsAddressPreviousIndex Cardinal32
  xcmCommsAddressOptionIndex Cardinal32

XcmCommsAddressExtEntry  
SEQUENCE    
  xcmCommsAddressExtRowStatus RowStatus
  xcmCommsAddressExtState XcmCommsMgmtState
  xcmCommsAddressExtConditions XcmCommsMgmtConditions
  xcmCommsAddressExtForm XcmCommsAddressExtForm
  xcmCommsAddressExtScope XcmCommsAddressExtScope
  xcmCommsAddressExtFanout XcmCommsAddressExtFanout
  xcmCommsAddressExtMgmtIndex Cardinal32
  xcmCommsAddressExtOwnerOID OBJECT IDENTIFIER

XcmCommsTrafficEntry  
SEQUENCE    
  xcmCommsTrafficRowStatus RowStatus
  xcmCommsTrafficInputUnit XcmHrDevTrafficUnit
  xcmCommsTrafficOutputUnit XcmHrDevTrafficUnit
  xcmCommsTrafficInputCount Counter32
  xcmCommsTrafficOutputCount Counter32
  xcmCommsTrafficInputErrors Counter32
  xcmCommsTrafficOutputErrors Counter32

XcmCommsAccessEntry  
SEQUENCE    
  xcmCommsAccessRowStatus RowStatus
  xcmCommsAccessConnectPorts Gauge32
  xcmCommsAccessHighConnectPorts Gauge32
  xcmCommsAccessMaxConnectPorts Cardinal32
  xcmCommsAccessDatagramPorts Gauge32
  xcmCommsAccessHighDatagramPorts Gauge32
  xcmCommsAccessMaxDatagramPorts Cardinal32

XcmCommsMgmtEntry  
SEQUENCE    
  xcmCommsMgmtIndex Ordinal32
  xcmCommsMgmtRowStatus RowStatus
  xcmCommsMgmtCommandRequest XcmCommsMgmtCommandRequest
  xcmCommsMgmtCommandData XcmCommsMgmtCommandData
  xcmCommsMgmtCommandStatus XcmGenSNMPv2ErrorStatus
  xcmCommsMgmtCommandInProgress TruthValue

Defined Values

xcmCommsEngineMIB 1.3.6.1.4.1.253.8.61
Version: 2.32.pub The MIB module for detailed protocol stack graphing, and active management of communications protocol stacks, communications end system applications, communications intermediate systems, and communications gateways for network accessible host systems. Usage: Note that throughout this MIB module, the INDEX clauses referring to 'hrDeviceIndex' for the 'hrDeviceTable' (Devices Group) of the Host Resources MIB (RFC 1514) shall ALWAYS specify host system CPUs (ie, 'hrDeviceProcessor') and shall NOT specify ANY other 'hrDeviceType'. Usage: The object 'xcmCommsStackXrefHrCommDevIndex' in the Comms Stack Xref Group of this MIB MAY be used to specify (for 'bottom' protocol stack layers) the corresponding value of 'hrDeviceIndex' for network, modem, serial port, and parallel port devices. And the object 'xcmCommsStackXrefIfIndex' may be used to specify the value of 'ifIndex' for the corresponding entry in the MIB-II 'ifTable' (ie, 'network interfaces'). Copyright (C) 1997 Xerox Corporation. All Rights Reserved.
MODULE-IDENTITY    

xcmCommsEngine 1.3.6.1.4.1.253.8.61.3
OBJECT IDENTIFIER    

xcmCommsEngineTable 1.3.6.1.4.1.253.8.61.3.2
A table of the communications engines installed and (possibly) running on platforms (ie, CPUs) on this host system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    XcmCommsEngineEntry

xcmCommsEngineEntry 1.3.6.1.4.1.253.8.61.3.2.1
An entry for a communications engine installed and (possibly) running on a platform (ie, CPU) on this host system. Usage: Note that values of 'hrDeviceIndex' used to reference entries in the 'xcmCommsEngineTable' shall ALWAYS reference entries in the 'hrDeviceTable' with 'hrDeviceType' equal to 'hrDeviceProcessor' (representing host system CPUs and therefore also having corresponding entries in the 'hrProcessorTable').
Status: current Access: not-accessible
OBJECT-TYPE    
  XcmCommsEngineEntry  

xcmCommsEngineRowStatus 1.3.6.1.4.1.253.8.61.3.2.1.1
This object is used to create and delete individual conceptual rows in the 'xcmCommsEngineTable'.
Status: current Access: read-only
OBJECT-TYPE    
  RowStatus  

xcmCommsEngineName 1.3.6.1.4.1.253.8.61.3.2.1.2
Human-readable name, used by system administrators and end users to identify this communications engine for systems management. Usage: This name should be the one normally used in a command shell for control of this communications engine.
Status: current Access: read-only
OBJECT-TYPE    
  XcmFixedLocaleDisplayString Size(0..255)  

xcmCommsEngineStackLast 1.3.6.1.4.1.253.8.61.3.2.1.3
The last entry index (regardless of its current state) in the 'xcmCommsStackTable' of this communications engine, on this host system. Usage: The last entry index explicitly bounds the valid range of 'xcmCommsStackIndex'.
Status: current Access: read-only
OBJECT-TYPE    
  Cardinal32  

xcmCommsEngineMuxLast 1.3.6.1.4.1.253.8.61.3.2.1.4
The last entry index (regardless of its current state) in the 'xcmCommsMuxTable' of this communications engine, on this host system. Usage: The last entry index explicitly bounds the valid range of 'xcmCommsMuxIndex'.
Status: current Access: read-only
OBJECT-TYPE    
  Cardinal32  

xcmCommsEngineAddressLast 1.3.6.1.4.1.253.8.61.3.2.1.6
The last entry index (regardless of its current state) in the 'xcmCommsAddressTable' of this communications engine, on this host system. Usage: The last entry index explicitly bounds the valid range of 'xcmCommsAddressIndex'.
Status: current Access: read-only
OBJECT-TYPE    
  Cardinal32  

xcmCommsEngineMgmtLast 1.3.6.1.4.1.253.8.61.3.2.1.7
The last entry index (regardless of its current state) in the 'xcmCommsMgmtTable' of this communications engine, on this host system. Usage: The last entry index explicitly bounds the valid range of 'xcmCommsMgmtIndex'.
Status: current Access: read-only
OBJECT-TYPE    
  Cardinal32  

xcmCommsEngineGroupSupport 1.3.6.1.4.1.253.8.61.3.2.1.8
The terse conformance statement of ALL mandatory, conditionally mandatory, and optional XCMI Comms Engine MIB object groups supported by this management agent implementation (ie, version) on this host system, specified in a bit-mask. Usage: Conforming management agents shall ALWAYS accurately report their support for XCMI Comms Engine MIB object groups.
Status: current Access: read-only
OBJECT-TYPE    
  XcmCommsEngineGroupSupport  

xcmCommsEngineCreateSupport 1.3.6.1.4.1.253.8.61.3.2.1.9
The terse conformance statement of ALL mandatory, conditionally mandatory, and optional XCMI Comms Engine MIB object groups supported for dynamic row creation (via '...RowStatus') by this management agent implementation (ie, version) on this host system, specified in a bit-mask. Usage: Conforming management agents shall ALWAYS accurately report their support for XCMI Comms Engine MIB object groups.
Status: current Access: read-only
OBJECT-TYPE    
  XcmCommsEngineGroupSupport  

xcmCommsEngineUpdateSupport 1.3.6.1.4.1.253.8.61.3.2.1.10
The terse conformance statement of ALL mandatory, conditionally mandatory, and optional XCMI Comms Engine MIB object groups supported for existing row update (via SNMP Set-Request PDUs) by this management agent implementation (ie, version) on this host system, specified in a bit-mask. Usage: Conforming management agents shall ALWAYS accurately report their support for XCMI Comms Engine MIB object groups.
Status: current Access: read-only
OBJECT-TYPE    
  XcmCommsEngineGroupSupport  

xcmCommsEngineExt 1.3.6.1.4.1.253.8.61.4
OBJECT IDENTIFIER    

xcmCommsEngineExtTable 1.3.6.1.4.1.253.8.61.4.2
A 'sparse' table which augments 'xcmCommsEngineTable' with additional useful information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    XcmCommsEngineExtEntry

xcmCommsEngineExtEntry 1.3.6.1.4.1.253.8.61.4.2.1
A 'sparse' entry which augments 'xcmCommsEngineEntry' with additional useful information.
Status: current Access: not-accessible
OBJECT-TYPE    
  XcmCommsEngineExtEntry  

xcmCommsEngineExtRowStatus 1.3.6.1.4.1.253.8.61.4.2.1.1
This object is used to create and delete individual conceptual rows in the 'xcmCommsEngineExtTable'.
Status: current Access: read-only
OBJECT-TYPE    
  RowStatus  

xcmCommsEngineExtState 1.3.6.1.4.1.253.8.61.4.2.1.2
A relatively generic description of the current state of this communications entity.
Status: current Access: read-only
OBJECT-TYPE    
  XcmCommsMgmtState  

xcmCommsEngineExtConditions 1.3.6.1.4.1.253.8.61.4.2.1.4
A relatively generic description of the current conditions of this communications entity.
Status: current Access: read-only
OBJECT-TYPE    
  XcmCommsMgmtConditions  

xcmCommsEngineExtVersionID 1.3.6.1.4.1.253.8.61.4.2.1.5
The software product ID of the SNMP sub-agent which implements the XCMI Comms Engine MIB on this host system. Usage: This object shall specify the software product ID of an SNMP sub-agent (possibly also found in a conceptual row in the 'hrSWRunTable' and/or 'hrSWInstalledTable' in the IETF HR MIB). This object shall NOT specify a particular release of the XCMI Comms Engine MIB, or the whole host system product. Note: Contrast with 'sysObjectID' for the whole SNMP agent in the IETF MIB-II (RFC 1213) and 'hrDeviceID' for the whole device (or whole product, in the case of 'xcmHrDevice...') in the IETF Host Resources MIB (RFC 1514).
Status: current Access: read-only
OBJECT-TYPE    
  ProductID  

xcmCommsEngineExtVersionDate 1.3.6.1.4.1.253.8.61.4.2.1.6
The software build date of the SNMP sub-agent which implements the XCMI Comms Engine MIB on this host system. Usage: This object shall specify the BUILD date of the SNMP sub-agent software (not available elsewhere in IETF/XCMI MIBs). This object shall NOT specify the INSTALL date of the SNMP sub-agent software on this host system, nor the RESET date. Note: Contrast with 'hrSWInstalledDate' in the Software Installed group of the IETF Host Resources MIB (RFC 1514), and 'xcmHrDevInfoResetDate' in the Device Info group of the XCMI Host Resources Extensions MIB.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

xcmCommsEngineExtMgmtIndex 1.3.6.1.4.1.253.8.61.4.2.1.7
The value of 'xcmCommsMgmtIndex' corresponding to a directly associated conceptual row in the 'xcmCommsMgmtTable', or zero if this 'managed entity' does NOT require such information.
Status: current Access: read-only
OBJECT-TYPE    
  Cardinal32  

xcmCommsEngineExtOwnerOID 1.3.6.1.4.1.253.8.61.4.2.1.8
The OID (object identifier) of the conceptual row or simple object which represents some 'owner entity' associated with this entry in the 'xcmCommsEngineExtTable'.
Status: current Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

xcmCommsStack 1.3.6.1.4.1.253.8.61.5
OBJECT IDENTIFIER    

xcmCommsStackTable 1.3.6.1.4.1.253.8.61.5.2
A table containing information on the relationships between the multiple stack layers or sublayers (ie, protocol entities) comprising the (possibly) running 'protocol stacks' on this host system. In particular, it contains information about which stack layer runs 'above' and 'below' which other stack layer.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    XcmCommsStackEntry

xcmCommsStackEntry 1.3.6.1.4.1.253.8.61.5.2.1
An entry for a stack layer in a protocol stack installed and (possibly) running on this host system.
Status: current Access: not-accessible
OBJECT-TYPE    
  XcmCommsStackEntry  

xcmCommsStackIndex 1.3.6.1.4.1.253.8.61.5.2.1.1
A unique value used by this host system to identify this conceptual row in the 'xcmCommsStackTable'.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ordinal32  

xcmCommsStackRowStatus 1.3.6.1.4.1.253.8.61.5.2.1.2
This object is used to create and delete individual conceptual rows in the 'xcmCommsStackTable'.
Status: current Access: read-only
OBJECT-TYPE    
  RowStatus  

xcmCommsStackTypeOID 1.3.6.1.4.1.253.8.61.5.2.1.3
An unambiguous stack layer type, used by system administrators and end users to identify the type of this stack layer. Usage: Since this unambiguous stack layer type is specified as an object identifier, it may be taken from any IETF, Xerox, third- party, or product-specific MIB, or it may simply be any IETF SMIv2-style 'autonomous type'. Usage: Suitable values for this unambiguous stack layer type are specified in the companion XCMI Comms Config TC (eg, 'xcmCONetwareIPX').
Status: current Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

xcmCommsStackName 1.3.6.1.4.1.253.8.61.5.2.1.4
Human-readable name, used by system administrators and end users to identify this stack layer for systems management. Usage: This name should be the one normally used in a command shell for control of this stack layer.
Status: current Access: read-only
OBJECT-TYPE    
  XcmFixedLocaleDisplayString Size(0..255)  

xcmCommsStackPosition 1.3.6.1.4.1.253.8.61.5.2.1.5
A relatively generic description of the current position of this protocol entity (ie, this layer) in this protocol stack. Usage: A conceptual row in 'xcmCommsStackTable', which occupies a 'bottom' position in a protocol stack AND has a corresponding row in the 'xcmCommsStackXrefTable', should ALWAYS have valid references in 'xcmCommsStackXrefIfIndex' (to IETF MIB-II) and 'xcmCommsStackXrefHrCommDevIndex' (to IETF Host Resources MIB). Usage: A conceptual row in 'xcmCommsStackTable' which occupies a 'lowerMux' and/or an 'upperMux' position in a protocol stack shall ALWAYS have one (or two) valid corresponding conceptual rows in the 'xcmCommsMuxTable', as the conventionally used 'xcmCommsStack[Lower|Upper]StackIndex' objects take on zero values for multiplexors (thus breaking the graph of the stack layers, without the use of the 'xcmCommsMuxTable').
Status: current Access: read-only
OBJECT-TYPE    
  XcmCommsStackPosition  

xcmCommsStackLowerStackIndex 1.3.6.1.4.1.253.8.61.5.2.1.6
The value of 'xcmCommsStackIndex' corresponding to a next lower associated conceptual row in the 'xcmCommsStackTable', or zero if this stack layer's position is either 'bottom' or 'lowerMux'.
Status: current Access: read-only
OBJECT-TYPE    
  Cardinal32  

xcmCommsStackUpperStackIndex 1.3.6.1.4.1.253.8.61.5.2.1.7
The value of 'xcmCommsStackIndex' corresponding to a next higher associated conceptual row in the 'xcmCommsStackTable', or zero if this stack layer's position is either 'upperMux' or sometimes 'top' (see usage note below). Usage: Only for protocol entities whose current purpose is either 'layerInterWorkingUnit' (ie, relays or gateways) or 'systemInterWorkingUnit' (ie, application gateways), it is permitted that the stack layer whose current position is 'top' have an upper layer index pointing to the peer entity (also in a 'top' position) which comprises the 'other half' of a relay or gateway between two different address domains (ie, an active protocol conversion relay) - that is the graphed protocol stack is an inverted 'U'.
Status: current Access: read-only
OBJECT-TYPE    
  Cardinal32  

xcmCommsStackAddressIndex 1.3.6.1.4.1.253.8.61.5.2.1.8
The value of 'xcmCommsAddressIndex' corresponding to the first associated conceptual row in the 'xcmCommsAddressTable', or zero if this 'owner entity' does NOT require such information.
Status: current Access: read-only
OBJECT-TYPE    
  Cardinal32  

xcmCommsStackOptionIndex 1.3.6.1.4.1.253.8.61.5.2.1.9
The value of 'xcmCommsOptionIndex' corresponding to the first associated conceptual row in the 'xcmCommsOptionTable', or zero if this stack layer does NOT require such information.
Status: current Access: read-only
OBJECT-TYPE    
  Cardinal32  

xcmCommsStackLowerMuxIndex 1.3.6.1.4.1.253.8.61.5.2.1.10
The value of 'xcmCommsMuxIndex' corresponding to the first associated conceptual row in the 'xcmCommsMuxTable', or zero if this stack layer's position is NOT 'lowerMux'.
Status: current Access: read-only
OBJECT-TYPE    
  Cardinal32  

xcmCommsStackUpperMuxIndex 1.3.6.1.4.1.253.8.61.5.2.1.11
The value of 'xcmCommsMuxIndex' corresponding to the first associated conceptual row in the 'xcmCommsMuxTable', or zero if this stack layer's position is NOT 'upperMux'.
Status: current Access: read-only
OBJECT-TYPE    
  Cardinal32  

xcmCommsStackExt 1.3.6.1.4.1.253.8.61.6
OBJECT IDENTIFIER    

xcmCommsStackExtTable 1.3.6.1.4.1.253.8.61.6.2
A 'sparse' table which augments 'xcmCommsStackTable' with additional useful information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    XcmCommsStackExtEntry

xcmCommsStackExtEntry 1.3.6.1.4.1.253.8.61.6.2.1
A 'sparse' entry which augments 'xcmCommsStackEntry' with additional useful information.
Status: current Access: not-accessible
OBJECT-TYPE    
  XcmCommsStackExtEntry  

xcmCommsStackExtRowStatus 1.3.6.1.4.1.253.8.61.6.2.1.1
This object is used to create and delete individual conceptual rows in the 'xcmCommsStackExtTable'.
Status: current Access: read-only
OBJECT-TYPE    
  RowStatus  

xcmCommsStackExtState 1.3.6.1.4.1.253.8.61.6.2.1.2
A relatively generic description of the current state of this communications entity.
Status: current Access: read-only
OBJECT-TYPE    
  XcmCommsMgmtState  

xcmCommsStackExtConditions 1.3.6.1.4.1.253.8.61.6.2.1.3
A relatively generic description of the current conditions of this communications entity.
Status: current Access: read-only
OBJECT-TYPE    
  XcmCommsMgmtConditions  

xcmCommsStackExtPurpose 1.3.6.1.4.1.253.8.61.6.2.1.4
A relatively generic description of the current purpose of this stack layer during normal operation.
Status: current Access: read-only
OBJECT-TYPE    
  XcmCommsStackExtPurpose  

xcmCommsStackExtRole 1.3.6.1.4.1.253.8.61.6.2.1.5
A relatively generic description of the current role of this stack layer during normal operation.
Status: current Access: read-only
OBJECT-TYPE    
  XcmCommsStackExtRole  

xcmCommsStackExtSuite 1.3.6.1.4.1.253.8.61.6.2.1.6
The current protocol suite of this protocol entity (stack layer or sublayer).
Status: current Access: read-only
OBJECT-TYPE    
  XcmCommsStackExtSuite  

xcmCommsStackExtSuiteVersion 1.3.6.1.4.1.253.8.61.6.2.1.7
The current protocol suite version of this protocol entity (stack layer or sublayer).
Status: current Access: read-only
OBJECT-TYPE    
  XcmCommsStackExtSuiteVersion  

xcmCommsStackExtLayer 1.3.6.1.4.1.253.8.61.6.2.1.8
The closest approximate layer in the OSI Reference Model (CCITT X.200 | ISO 7498) to the current behavior of this stack layer or sublayer.
Status: current Access: read-only
OBJECT-TYPE    
  XcmCommsStackExtLayer  

xcmCommsStackExtProtocol 1.3.6.1.4.1.253.8.61.6.2.1.9
The specific protocol (within a given protocol suite) currently configured for this stack layer or sublayer.
Status: current Access: read-only
OBJECT-TYPE    
  XcmCommsStackExtProtocol  

xcmCommsStackExtMgmtIndex 1.3.6.1.4.1.253.8.61.6.2.1.10
The value of 'xcmCommsMgmtIndex' corresponding to the directly associated conceptual row in the 'xcmCommsMgmtTable', or zero if this 'managed entity' does NOT require such information.
Status: current Access: read-only
OBJECT-TYPE    
  Cardinal32  

xcmCommsStackExtOwnerOID 1.3.6.1.4.1.253.8.61.6.2.1.11
The OID (object identifier) of the conceptual row or simple object which represents some 'owner entity' associated with this entry in the 'xcmCommsStackExtTable'. Usage: A Printer Channel, for example, might choose to specify the OID of some conceptual row in the 'prtChannelTable'.
Status: current Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

xcmCommsStackXref 1.3.6.1.4.1.253.8.61.7
OBJECT IDENTIFIER    

xcmCommsStackXrefTable 1.3.6.1.4.1.253.8.61.7.2
A table containing optional cross reference information for the multiple stack layers or sublayers (ie, protocol entities) comprising the (possibly) running 'protocol stacks' on this host system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    XcmCommsStackXrefEntry

xcmCommsStackXrefEntry 1.3.6.1.4.1.253.8.61.7.2.1
An entry for a stack layer in a protocol stack installed and (possibly) running on this host system.
Status: current Access: not-accessible
OBJECT-TYPE    
  XcmCommsStackXrefEntry  

xcmCommsStackXrefRowStatus 1.3.6.1.4.1.253.8.61.7.2.1.1
This object is used to create and delete individual conceptual rows in the 'xcmCommsStackXrefTable'.
Status: current Access: read-only
OBJECT-TYPE    
  RowStatus  

xcmCommsStackXrefLayerMgmtIndex 1.3.6.1.4.1.253.8.61.7.2.1.2
The value of 'xcmCommsStackIndex' corresponding to the one-to-one associated conceptual row in the 'xcmCommsStackTable' which has 'xcmCommsStackExtPurpose' of 'layerManagement', or zero if this this stack layer has no associated layer management entity.
Status: current Access: read-only
OBJECT-TYPE    
  Cardinal32  

xcmCommsStackXrefLayerSecIndex 1.3.6.1.4.1.253.8.61.7.2.1.3
The value of 'xcmCommsStackIndex' corresponding to the one-to-one associated conceptual row in the 'xcmCommsStackTable' which has 'xcmCommsStackExtPurpose' of 'layerSecurity', or zero if this this stack layer has no associated layer security entity.
Status: current Access: read-only
OBJECT-TYPE    
  Cardinal32  

xcmCommsStackXrefLayerIWUIndex 1.3.6.1.4.1.253.8.61.7.2.1.4
The value of 'xcmCommsStackIndex' corresponding to the one-to-one associated conceptual row in the 'xcmCommsStackTable' which has 'xcmCommsStackExtPurpose' of 'layerInterWorkingUnit', or zero if this this stack layer has no associated layer relay entity.
Status: current Access: read-only
OBJECT-TYPE    
  Cardinal32  

xcmCommsStackXrefHrSWRunIndex 1.3.6.1.4.1.253.8.61.7.2.1.5
The value of 'hrSWRunIndex' corresponding to the directly associated conceptual row in the 'hrSWRunTable' of the Host Resources MIB (RFC 1514), or zero if 'hrSWRunTable' is NOT implemented.
Status: current Access: read-only
OBJECT-TYPE    
  Cardinal32  

xcmCommsStackXrefHrSWInsIndex 1.3.6.1.4.1.253.8.61.7.2.1.6
The value of 'hrSWInstalledIndex' corresponding to the directly associated conceptual row in the 'hrSWInstalledTable' of the Host Resources MIB (RFC 1514), or zero if 'hrSWInstalledTable' is NOT implemented.
Status: current Access: read-only
OBJECT-TYPE    
  Cardinal32  

xcmCommsStackXrefIfIndex 1.3.6.1.4.1.253.8.61.7.2.1.7
The value of 'ifIndex' corresponding to the directly associated conceptual row in the 'ifTable' (Interfaces Group) of the MIB-II (RFC 1213), or zero if the position of this stack layer is NOT 'bottom' (ie, this stack layer does NOT represent a physical 'network interface'). Usage: This is partially a convenience object, since given the value of 'hrDeviceIndex' for an 'hrDeviceNetwork' type device, the corresponding 'ifIndex' is found in the mandatory entry in the 'hrNetworkTable'. However, note that for 'hrDeviceModem', 'hrDeviceSerialPort', and 'hrDeviceParallelPort' devices, the 'xcmCommsStackXrefIfIndex' object is a NECESSITY for support of this communications engine MIB.
Status: current Access: read-only
OBJECT-TYPE    
  Cardinal32  

xcmCommsStackXrefHrCommDevIndex 1.3.6.1.4.1.253.8.61.7.2.1.8
The value of 'hrDeviceIndex' corresponding to the directly associated conceptual rows in the 'hrDeviceTable' and (possibly) 'hrNetworkTable' of the Host Resources MIB (RFC 1514), or zero if the position of this stack layer is NOT 'bottom' (ie, this stack layer does NOT represent a physical 'network interface'). Usage: Note that for 'hrDeviceModem', 'hrDeviceSerialPort', and 'hrDeviceParallelPort' devices, there is NO corresponding entry in the 'hrNetworkTable', a subtle difference between MIB-II (RFC 1213) and the Host Resources MIB (RFC 1514).
Status: current Access: read-only
OBJECT-TYPE    
  Cardinal32  

xcmCommsMux 1.3.6.1.4.1.253.8.61.8
OBJECT IDENTIFIER    

xcmCommsMuxTable 1.3.6.1.4.1.253.8.61.8.2
A table containing information on the relationships between the multiple stack layers or sublayers (ie, protocol entities) participating in a 'upper' or 'lower' multiplexor (ie, the simultaneous adjacency of two or more 'upper' or 'lower' stack layers with a single instance of a 'base' stack layer), eg, IP (a 'base' stack layer) operating below both TCP and UDP (the 'adjacent' stack layers).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    XcmCommsMuxEntry

xcmCommsMuxEntry 1.3.6.1.4.1.253.8.61.8.2.1
An entry for a 'base' stack layer participating in an 'upper' or 'lower' multiplexor.
Status: current Access: not-accessible
OBJECT-TYPE    
  XcmCommsMuxEntry  

xcmCommsMuxIndex 1.3.6.1.4.1.253.8.61.8.2.1.1
A unique value used by this host system to identify this conceptual row in the 'xcmCommsMuxTable'.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ordinal32  

xcmCommsMuxRowStatus 1.3.6.1.4.1.253.8.61.8.2.1.2
This object is used to create and delete individual conceptual rows in the 'xcmCommsMuxTable'.
Status: current Access: read-only
OBJECT-TYPE    
  RowStatus  

xcmCommsMuxNextIndex 1.3.6.1.4.1.253.8.61.8.2.1.3
The value of 'xcmCommsMuxIndex' corresponding to a next associated conceptual row in the 'xcmCommsMuxTable', or zero if this is the last associated conceptual row in a given set.
Status: current Access: read-only
OBJECT-TYPE    
  Cardinal32  

xcmCommsMuxPreviousIndex 1.3.6.1.4.1.253.8.61.8.2.1.4
The value of 'xcmCommsMuxIndex' corresponding to a previous associated conceptual row in the 'xcmCommsMuxTable', or zero if this is the first associated conceptual row in a given set.
Status: current Access: read-only
OBJECT-TYPE    
  Cardinal32  

xcmCommsMuxOptionIndex 1.3.6.1.4.1.253.8.61.8.2.1.5
The value of 'xcmCommsOptionIndex' corresponding to the first associated conceptual row in the 'xcmCommsOptionTable', or zero if this multiplexor entry does NOT require such information.
Status: current Access: read-only
OBJECT-TYPE    
  Cardinal32  

xcmCommsMuxBaseStackIndex 1.3.6.1.4.1.253.8.61.8.2.1.6
The value of 'xcmCommsStackIndex' corresponding to the base associated conceptual row in the 'xcmCommsStackTable'.
Status: current Access: read-only
OBJECT-TYPE    
  Ordinal32  

xcmCommsMuxAdjacentStackIndex 1.3.6.1.4.1.253.8.61.8.2.1.7
The value of 'xcmCommsStackIndex' corresponding to the adjacent associated conceptual row in the 'xcmCommsStackTable'.
Status: current Access: read-only
OBJECT-TYPE    
  Ordinal32  

xcmCommsMuxExt 1.3.6.1.4.1.253.8.61.9
OBJECT IDENTIFIER    

xcmCommsMuxExtTable 1.3.6.1.4.1.253.8.61.9.2
A 'sparse' table which augments 'xcmCommsMuxTable' with additional useful information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    XcmCommsMuxExtEntry

xcmCommsMuxExtEntry 1.3.6.1.4.1.253.8.61.9.2.1
A 'sparse' entry which augments 'xcmCommsMuxEntry' with additional useful information.
Status: current Access: not-accessible
OBJECT-TYPE    
  XcmCommsMuxExtEntry  

xcmCommsMuxExtRowStatus 1.3.6.1.4.1.253.8.61.9.2.1.1
This object is used to create and delete individual conceptual rows in the 'xcmCommsMuxExtTable'.
Status: current Access: read-only
OBJECT-TYPE    
  RowStatus  

xcmCommsMuxExtState 1.3.6.1.4.1.253.8.61.9.2.1.2
A relatively generic description of the current state of this communications entity.
Status: current Access: read-only
OBJECT-TYPE    
  XcmCommsMgmtState  

xcmCommsMuxExtConditions 1.3.6.1.4.1.253.8.61.9.2.1.3
A relatively generic description of the current conditions of this communications entity.
Status: current Access: read-only
OBJECT-TYPE    
  XcmCommsMgmtConditions  

xcmCommsMuxExtMgmtIndex 1.3.6.1.4.1.253.8.61.9.2.1.4
The value of 'xcmCommsMgmtIndex' corresponding to the directly associated conceptual row in the 'xcmCommsMgmtTable', or zero if this 'managed entity' does NOT require such information.
Status: current Access: read-only
OBJECT-TYPE    
  Cardinal32  

xcmCommsMuxExtAddressIndex 1.3.6.1.4.1.253.8.61.9.2.1.5
The value of 'xcmCommsAddressIndex' corresponding to the first associated conceptual row in the 'xcmCommsAddressTable', or zero if this 'owner entity' does NOT require such information.
Status: current Access: read-only
OBJECT-TYPE    
  Cardinal32  

xcmCommsMuxExtOwnerOID 1.3.6.1.4.1.253.8.61.9.2.1.6
The OID (object identifier) of the conceptual row or simple object which represents some 'owner entity' associated with this entry in the 'xcmCommsMuxExtTable'.
Status: current Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

xcmCommsAddress 1.3.6.1.4.1.253.8.61.10
OBJECT IDENTIFIER    

xcmCommsAddressTable 1.3.6.1.4.1.253.8.61.10.2
A table containing information on unicast, multicast, and broadcast addresses (remote/local) known to this host system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    XcmCommsAddressEntry

xcmCommsAddressEntry 1.3.6.1.4.1.253.8.61.10.2.1
An entry containing information on one unicast, multicast, or broadcast address (remote/local) known to this host system.
Status: current Access: not-accessible
OBJECT-TYPE    
  XcmCommsAddressEntry  

xcmCommsAddressIndex 1.3.6.1.4.1.253.8.61.10.2.1.1
A unique value used by this host system to identify this conceptual row in the 'xcmCommsAddressTable'.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ordinal32  

xcmCommsAddressRowStatus 1.3.6.1.4.1.253.8.61.10.2.1.2
This object is used to create and delete individual conceptual rows in the 'xcmCommsAddressTable'.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

xcmCommsAddressTypeOID 1.3.6.1.4.1.253.8.61.10.2.1.3
An unambiguous address type, used by system administrators and end users to identify the type of this address. Usage: Since this unambiguous address type is specified as an object identifier, it may be taken from any IETF, Xerox, third- party, or product-specific MIB, or it may simply be any IETF SMIv2-style 'autonomous type'. Usage: Suitable values for this unambiguous address type are specified in the companion XCMI Comms Config TC (eg, 'xcmCONetwareIPX').
Status: current Access: read-create
OBJECT-TYPE    
  OBJECT IDENTIFIER  

xcmCommsAddressUserRole 1.3.6.1.4.1.253.8.61.10.2.1.4
An unambiguous address user role, used by system administrators and end users to identify the user role of this address. Usage: This unambiguous address user role is specified by a value defined in the textual convention 'XcmSecUserRole' in the XCMI Security/AAA TC. Usage: This unambiguous address user role is weakly typed here to avoid cyclic compilation dependencies between XCMI MIBs. Usage: A chain of 'xcmCommsAddressEntry' objects may be pointed to by 'xcmDevHelpCommsAddressIndex' in the Device Help group of the XCMI Host Resources Extensions MIB. In this case, the 'xcmCommsAddressTypeOID' object may contain values such as 'xcmCOOsiwanPSTNAddress' (analog phone number), 'xcmCOOsiwanFaxAddress' (fax phone number), etc, taken from the XCMI Comms Config TC. In this case, the 'xcmCommsAddressUserRole' object may be used to specify the role of the system admin, system operator, etc (whose name is specified by 'xcmCommsAddressName', address format is specified by 'xcmCommsAddressTypeOID', and actual address is specified by 'xcmCommsAddressCanonical').
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

xcmCommsAddressName 1.3.6.1.4.1.253.8.61.10.2.1.5
Human-readable name, used by system administrators and end users to identify this protocol entity. Usage: This name should be the one normally used in a command shell for control of this protocol entity. Usage: When a chain of 'xcmCommsAddressEntry' objects is pointed to by 'xcmHrDevHelpCommsAddressIndex' in the Device Help group of the XCMI Host Resources Extensions MIB (see details at 'xcmCommsAddressUserRole' object above) special semantics apply. In this case, the 'xcmCommsAddressName' object may be used to specify the name of the system admin, system operator, etc (whose role is specified by 'xcmCommsAddressUserRole', address format is specified by 'xcmCommsAddressTypeOID', and actual address is specified by 'xcmCommsAddressCanonical').
Status: current Access: read-create
OBJECT-TYPE    
  XcmFixedLocaleDisplayString Size(0..255)  

xcmCommsAddressCanonical 1.3.6.1.4.1.253.8.61.10.2.1.6
The current canonical address of this protocol entity.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

xcmCommsAddressNextIndex 1.3.6.1.4.1.253.8.61.10.2.1.7
The value of 'xcmCommsAddressIndex' corresponding to a next associated conceptual row in the 'xcmCommsAddressTable', or zero if this is the last associated conceptual row in a given set. Usage: A locally administered 'directory' may be searched and/or managed via use of the 'xcmCommsAddressNextIndex' and the 'xcmCommsAddressPreviousIndex' objects referenced from each base protocol entity (ie, stack layer).
Status: current Access: read-create
OBJECT-TYPE    
  Cardinal32  

xcmCommsAddressPreviousIndex 1.3.6.1.4.1.253.8.61.10.2.1.8
The value of 'xcmCommsAddressIndex' corresponding to a previous associated conceptual row in the 'xcmCommsAddressTable', or zero if this is the first associated conceptual row in a given set.
Status: current Access: read-create
OBJECT-TYPE    
  Cardinal32  

xcmCommsAddressOptionIndex 1.3.6.1.4.1.253.8.61.10.2.1.9
The value of 'xcmCommsOptionIndex' corresponding to the first associated conceptual row in the 'xcmCommsOptionTable', or zero if this address entry does NOT require such information.
Status: current Access: read-create
OBJECT-TYPE    
  Cardinal32  

xcmCommsAddressExt 1.3.6.1.4.1.253.8.61.11
OBJECT IDENTIFIER    

xcmCommsAddressExtTable 1.3.6.1.4.1.253.8.61.11.2
A 'sparse' table which augments 'xcmCommsAddressTable' with additional useful information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    XcmCommsAddressExtEntry

xcmCommsAddressExtEntry 1.3.6.1.4.1.253.8.61.11.2.1
A 'sparse' entry which augments 'xcmCommsAddressEntry' with additional useful information.
Status: current Access: not-accessible
OBJECT-TYPE    
  XcmCommsAddressExtEntry  

xcmCommsAddressExtRowStatus 1.3.6.1.4.1.253.8.61.11.2.1.1
This object is used to create and delete individual conceptual rows in the 'xcmCommsAddressExtTable'.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

xcmCommsAddressExtState 1.3.6.1.4.1.253.8.61.11.2.1.2
A relatively generic description of the current state of this communications entity.
Status: current Access: read-only
OBJECT-TYPE    
  XcmCommsMgmtState  

xcmCommsAddressExtConditions 1.3.6.1.4.1.253.8.61.11.2.1.3
A relatively generic description of the current conditions of this communications entity.
Status: current Access: read-only
OBJECT-TYPE    
  XcmCommsMgmtConditions  

xcmCommsAddressExtForm 1.3.6.1.4.1.253.8.61.11.2.1.4
The current address form of this protocol entity.
Status: current Access: read-create
OBJECT-TYPE    
  XcmCommsAddressExtForm  

xcmCommsAddressExtScope 1.3.6.1.4.1.253.8.61.11.2.1.5
The current address scope of this protocol entity.
Status: current Access: read-create
OBJECT-TYPE    
  XcmCommsAddressExtScope  

xcmCommsAddressExtFanout 1.3.6.1.4.1.253.8.61.11.2.1.6
The current address fan out of this protocol entity.
Status: current Access: read-create
OBJECT-TYPE    
  XcmCommsAddressExtFanout  

xcmCommsAddressExtMgmtIndex 1.3.6.1.4.1.253.8.61.11.2.1.7
The value of 'xcmCommsMgmtIndex' corresponding to the directly associated conceptual row in the 'xcmCommsMgmtTable', or zero if this 'managed entity' does NOT require such information.
Status: current Access: read-create
OBJECT-TYPE    
  Cardinal32  

xcmCommsAddressExtOwnerOID 1.3.6.1.4.1.253.8.61.11.2.1.8
The OID (object identifier) of the conceptual row or simple object which represents some 'owner entity' associated with this entry in the 'xcmCommsAddressExtTable'.
Status: current Access: read-create
OBJECT-TYPE    
  OBJECT IDENTIFIER  

xcmCommsTraffic 1.3.6.1.4.1.253.8.61.12
OBJECT IDENTIFIER    

xcmCommsTrafficTable 1.3.6.1.4.1.253.8.61.12.2
A table containing input and output traffic counters for stack layers.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    XcmCommsTrafficEntry

xcmCommsTrafficEntry 1.3.6.1.4.1.253.8.61.12.2.1
An entry containing input and output traffic counters for this stack layer.
Status: current Access: not-accessible
OBJECT-TYPE    
  XcmCommsTrafficEntry  

xcmCommsTrafficRowStatus 1.3.6.1.4.1.253.8.61.12.2.1.1
This object is used to create and delete individual conceptual rows in the 'xcmCommsTrafficTable'.
Status: current Access: read-only
OBJECT-TYPE    
  RowStatus  

xcmCommsTrafficInputUnit 1.3.6.1.4.1.253.8.61.12.2.1.2
A layer input unit, used by system administrators and end users of this layer for traffic counters.
Status: current Access: read-only
OBJECT-TYPE    
  XcmHrDevTrafficUnit  

xcmCommsTrafficOutputUnit 1.3.6.1.4.1.253.8.61.12.2.1.3
A layer output unit, used by system administrators and end users of this layer for traffic counters.
Status: current Access: read-only
OBJECT-TYPE    
  XcmHrDevTrafficUnit  

xcmCommsTrafficInputCount 1.3.6.1.4.1.253.8.61.12.2.1.4
A layer input traffic count, used by system administrators and end users of this layer. Usage: Although no default value ('DEFVAL' clause) is permitted (by IETF SMIv2) for this counter, conforming host systems shall ALWAYS zero this counter upon conceptual row creation.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xcmCommsTrafficOutputCount 1.3.6.1.4.1.253.8.61.12.2.1.5
A layer output traffic count, used by system administrators and end users of this layer. Usage: Although no default value ('DEFVAL' clause) is permitted (by IETF SMIv2) for this counter, conforming host systems shall ALWAYS zero this counter upon conceptual row creation.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xcmCommsTrafficInputErrors 1.3.6.1.4.1.253.8.61.12.2.1.6
A layer input errors count, used by system administrators and end users of this layer. Usage: Although no default value ('DEFVAL' clause) is permitted (by IETF SMIv2) for this counter, conforming host systems shall ALWAYS zero this counter upon conceptual row creation.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xcmCommsTrafficOutputErrors 1.3.6.1.4.1.253.8.61.12.2.1.7
A layer output errors count, used by system administrators and end users of this layer. Usage: Although no default value ('DEFVAL' clause) is permitted (by IETF SMIv2) for this counter, conforming host systems shall ALWAYS zero this counter upon conceptual row creation.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xcmCommsAccess 1.3.6.1.4.1.253.8.61.13
OBJECT IDENTIFIER    

xcmCommsAccessTable 1.3.6.1.4.1.253.8.61.13.2
A table containing current, high-water mark, and maximum permitted values for both connection (or association) and message (or datagram) ports at the upper sides (ie, service provider interfaces) of stack layers.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    XcmCommsAccessEntry

xcmCommsAccessEntry 1.3.6.1.4.1.253.8.61.13.2.1
A table containing current, high-water mark, and maximum permitted values for both connection (or association) and message (or datagram) ports at the upper side (ie, service provider interface) of this stack layer.
Status: current Access: not-accessible
OBJECT-TYPE    
  XcmCommsAccessEntry  

xcmCommsAccessRowStatus 1.3.6.1.4.1.253.8.61.13.2.1.1
This object is used to create and delete individual conceptual rows in the 'xcmCommsAccessTable'.
Status: current Access: read-only
OBJECT-TYPE    
  RowStatus  

xcmCommsAccessConnectPorts 1.3.6.1.4.1.253.8.61.13.2.1.2
The current number of connection (or association) ports open at the upper side (ie, service provider interface) of this layer.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

xcmCommsAccessHighConnectPorts 1.3.6.1.4.1.253.8.61.13.2.1.3
The highest number of connection (or association) ports open at the upper side (ie, service provider interface) of this layer.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

xcmCommsAccessMaxConnectPorts 1.3.6.1.4.1.253.8.61.13.2.1.4
The maximum number of connection (or association) ports permitted at the upper side (ie, service provider interface) of this layer.
Status: current Access: read-only
OBJECT-TYPE    
  Cardinal32  

xcmCommsAccessDatagramPorts 1.3.6.1.4.1.253.8.61.13.2.1.5
The current number of message (or datagram) ports open at the upper side (ie, service provider interface) of this layer.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

xcmCommsAccessHighDatagramPorts 1.3.6.1.4.1.253.8.61.13.2.1.6
The highest number of message (or datagram) ports open at the upper side (ie, service provider interface) of this layer.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

xcmCommsAccessMaxDatagramPorts 1.3.6.1.4.1.253.8.61.13.2.1.7
The maximum number of message (or datagram) ports permitted at the upper side (ie, service provider interface) of this layer.
Status: current Access: read-only
OBJECT-TYPE    
  Cardinal32  

xcmCommsMgmt 1.3.6.1.4.1.253.8.61.14
OBJECT IDENTIFIER    

xcmCommsMgmtTable 1.3.6.1.4.1.253.8.61.14.2
A table containing additional management control objects for installed and (possibly) active entities on this host system and supporting detailed and extensible 'states' and 'conditions'.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    XcmCommsMgmtEntry

xcmCommsMgmtEntry 1.3.6.1.4.1.253.8.61.14.2.1
An entry containing additional management control objects for installed and (possibly) active entity on this host system and supporting detailed and extensible 'states' and 'conditions'.
Status: current Access: not-accessible
OBJECT-TYPE    
  XcmCommsMgmtEntry  

xcmCommsMgmtIndex 1.3.6.1.4.1.253.8.61.14.2.1.1
A unique value used by this host system to identify this conceptual row in the 'xcmCommsMgmtTable'.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ordinal32  

xcmCommsMgmtRowStatus 1.3.6.1.4.1.253.8.61.14.2.1.2
This object is used to create and delete individual conceptual rows in the 'xcmCommsMgmtTable'.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

xcmCommsMgmtCommandRequest 1.3.6.1.4.1.253.8.61.14.2.1.3
The most recent comms management command request specified for this conceptual row in the 'xcmCommsMgmtTable'.
Status: current Access: read-create
OBJECT-TYPE    
  XcmCommsMgmtCommandRequest  

xcmCommsMgmtCommandData 1.3.6.1.4.1.253.8.61.14.2.1.4
The most recent comms management command data (if any) specified for this conceptual row in the 'xcmCommsMgmtTable'.
Status: current Access: read-create
OBJECT-TYPE    
  XcmCommsMgmtCommandData Size(0..255)  

xcmCommsMgmtCommandStatus 1.3.6.1.4.1.253.8.61.14.2.1.5
The simple comms management error status associated with this conceptual row in 'xcmCommsMgmtTable'. Usage: Conforming management agents shall ALWAYS set this object to the value returned in an SNMP Set-Response PDU when a simple comms management operation is 'accepted', ie, when 'xcmCommsMgmtCommandInProgress' goes from 'false' to 'true'. Usage: Conforming management agents shall ALWAYS set this object to the value of the completion status of the (possibly deferred) simple comms management operation, when 'xcmCommsMgmtCommandInProgress' goes from 'true' to 'false'.
Status: current Access: read-only
OBJECT-TYPE    
  XcmGenSNMPv2ErrorStatus  

xcmCommsMgmtCommandInProgress 1.3.6.1.4.1.253.8.61.14.2.1.6
The comms management in progress status associated with this conceptual row in 'xcmCommsMgmtTable'.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

xcmCommsEngineMIBConformance 1.3.6.1.4.1.253.8.61.2
OBJECT IDENTIFIER    

xcmCommsEngineMIBGroups 1.3.6.1.4.1.253.8.61.2.2
OBJECT IDENTIFIER    

xcmCommsEngineMIBCompliance 1.3.6.1.4.1.253.8.61.2.3
The compliance statements for SNMP management agents that implement the Comms Engine MIB.
Status: current Access: read-only
MODULE-COMPLIANCE    

xcmCommsEngineMIBHelpCompliance 1.3.6.1.4.1.253.8.61.2.4
The compliance statements for SNMP management agents that implement a subset of the Comms Engine MIB, for the sole purpose of supporting extended 'contact' information per device, via the Device Help group of the XCMI Host Resources Ext MIB. Usage: See 'Usage' paragraphs in the DESCRIPTION sub-clauses of the following OBJECT clauses for additional usage details.
Status: current Access: read-only
MODULE-COMPLIANCE    

xcmCommsEngineGroup 1.3.6.1.4.1.253.8.61.2.2.3
Comms Engine Group (Comms Engines).
Status: current Access: read-only
OBJECT-GROUP    

xcmCommsEngineExtGroup 1.3.6.1.4.1.253.8.61.2.2.4
Comms Engine Ext Group (Comms Engines).
Status: current Access: read-only
OBJECT-GROUP    

xcmCommsStackGroup 1.3.6.1.4.1.253.8.61.2.2.5
Comms Stack Group (Stack Layers).
Status: current Access: read-only
OBJECT-GROUP    

xcmCommsStackExtGroup 1.3.6.1.4.1.253.8.61.2.2.6
Comms Stack Ext Group (Stack Layers).
Status: current Access: read-only
OBJECT-GROUP    

xcmCommsStackXrefGroup 1.3.6.1.4.1.253.8.61.2.2.7
Comms Stack Xref Group (Stack Layers).
Status: current Access: read-only
OBJECT-GROUP    

xcmCommsMuxGroup 1.3.6.1.4.1.253.8.61.2.2.8
Comms Mux Group (Multiplexors).
Status: current Access: read-only
OBJECT-GROUP    

xcmCommsMuxExtGroup 1.3.6.1.4.1.253.8.61.2.2.9
Comms Mux Ext Group (Multiplexors).
Status: current Access: read-only
OBJECT-GROUP    

xcmCommsAddressGroup 1.3.6.1.4.1.253.8.61.2.2.10
Comms Address Group (Directories).
Status: current Access: read-only
OBJECT-GROUP    

xcmCommsAddressExtGroup 1.3.6.1.4.1.253.8.61.2.2.11
Comms Address Ext Group (Directories).
Status: current Access: read-only
OBJECT-GROUP    

xcmCommsTrafficGroup 1.3.6.1.4.1.253.8.61.2.2.12
Comms Traffic Group (Stack Layer Traffic Counters).
Status: current Access: read-only
OBJECT-GROUP    

xcmCommsAccessGroup 1.3.6.1.4.1.253.8.61.2.2.13
Comms Access Group (Stack Layer Access Counters).
Status: current Access: read-only
OBJECT-GROUP    

xcmCommsMgmtGroup 1.3.6.1.4.1.253.8.61.2.2.14
Comms Mgmt Group (State Management).
Status: current Access: read-only
OBJECT-GROUP