XEDIA-ISDN-MIB

File: XEDIA-ISDN-MIB.mib (8064 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
ISDN-MIB DIAL-CONTROL-MIB XEDIA-REG

Imported symbols

MODULE-IDENTITY OBJECT-TYPE MODULE-COMPLIANCE
OBJECT-GROUP RowStatus DisplayString
isdnBasicRateEntry isdnSignalingEntry dialCtlPeerCfgEntry
xediaMibs

Defined Types

XisdnEntry  
SEQUENCE    
  xisdnLoopbackState INTEGER

XIsdnSignalingEntry  
SEQUENCE    
  isdnSignalingCallingAddress2 DisplayString
  isdnEndpointSpid DisplayString
  isdnEndpointSpid2 DisplayString

XdialCtlPeerCfgEntry  
SEQUENCE    
  xcallControl INTEGER
  xnailedUp INTEGER

Defined Values

xediaIsdnMIB 1.3.6.1.4.1.838.3.37
This module defines additional objects for management of ISDN in Xedia devices, above and beyond what is defined in the standard rfc2127, and proposed drafts.
MODULE-IDENTITY    

xisdnObjects 1.3.6.1.4.1.838.3.37.1
OBJECT IDENTIFIER    

xisdnConformance 1.3.6.1.4.1.838.3.37.2
OBJECT IDENTIFIER    

xisdnTable 1.3.6.1.4.1.838.3.37.1.1
A stupid SNMP construct.
OBJECT-TYPE    
  SEQUENCE OF  
    XisdnEntry

xisdnEntry 1.3.6.1.4.1.838.3.37.1.1.1
An entry containing additional management information applicable to an ISDN interface.
OBJECT-TYPE    
  XisdnEntry  

xisdnLoopbackState 1.3.6.1.4.1.838.3.37.1.1.1.1
loopback status
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

xisdnSignalingTable 1.3.6.1.4.1.838.3.37.1.4
ISDN signaling table containing configuration and operational parameters for all ISDN signaling channels on this managed device.
OBJECT-TYPE    
  SEQUENCE OF  
    XIsdnSignalingEntry

xisdnSignalingEntry 1.3.6.1.4.1.838.3.37.1.4.1
An entry in the ISDN Signaling Table. To create a new entry, only isdnSignalingProtocol needs to be specified before isdnSignalingStatus can become active(1).
OBJECT-TYPE    
  XIsdnSignalingEntry  

isdnSignalingCallingAddress2 1.3.6.1.4.1.838.3.37.1.4.1.1
The ISDN Address to be assigned to the second B channel. Obviously not the right way to do this.
OBJECT-TYPE    
  DisplayString  

isdnEndpointSpid 1.3.6.1.4.1.838.3.37.1.4.1.2
The Service profile IDentifier (SPID) information for this Terminal Endpoint. The SPID is composed of 9-20 numeric characters. This information has to be defined in addition to the local number for some switch protocol types, e.g. Bellcore NI-1 and NI-2. If this object is not required, it is a zero length string.
OBJECT-TYPE    
  DisplayString  

isdnEndpointSpid2 1.3.6.1.4.1.838.3.37.1.4.1.3
The Service profile IDentifier (SPID) information for this Terminal Endpoint. The SPID is composed of 9-20 numeric characters. This information has to be defined in addition to the local number for some switch protocol types, e.g. Bellcore NI-1 and NI-2. If this object is not required, it is a zero length string.
OBJECT-TYPE    
  DisplayString  

xdialCtlPeerCfgTable 1.3.6.1.4.1.838.3.37.1.2
A stupid SNMP construct.
OBJECT-TYPE    
  SEQUENCE OF  
    XdialCtlPeerCfgEntry

xdialCtlPeerCfgEntry 1.3.6.1.4.1.838.3.37.1.2.1
An entry containing additional management information applicable to an ISDN interface.
OBJECT-TYPE    
  XdialCtlPeerCfgEntry  

xcallControl 1.3.6.1.4.1.838.3.37.1.2.1.1
force outbound call
OBJECT-TYPE    
  INTEGER noOp(1), connect(2), disconnect(3)  

xnailedUp 1.3.6.1.4.1.838.3.37.1.2.1.2
permanant (non-signalling) B channel connection
OBJECT-TYPE    
  INTEGER none(1), b1(2), b2(3)  

xisdnVersion 1.3.6.1.4.1.838.3.37.1.3
the ISDN subsystem software version number
OBJECT-TYPE    
  DisplayString  

xisdnCompliances 1.3.6.1.4.1.838.3.37.2.1
OBJECT IDENTIFIER    

xisdnGroups 1.3.6.1.4.1.838.3.37.2.2
OBJECT IDENTIFIER    

xisdnCompliance 1.3.6.1.4.1.838.3.37.2.1.1
The compliance statement for all agents that support this MIB. A compliant agent implements all objects defined in this MIB.
MODULE-COMPLIANCE    

xisdnAllGroup 1.3.6.1.4.1.838.3.37.2.2.1
The set of all accessible objects in this MIB.
OBJECT-GROUP