Wellfleet-MPLS-MLM-MIB

File: Wellfleet-MPLS-MLM-MIB.mib (31084 bytes)

Imported modules

Imported symbols

TimeTicks	Counter	OBJECT-TYPE
wfMplsAtmGroup

Defined Types

WfMplsAtmIfConfEntry
SEQUENCE
	wfMplsAtmIfCreate	INTEGER
	wfMplsAtmIfAdminStatus	INTEGER
	wfMplsAtmIfConfLineNumber	INTEGER
	wfMplsAtmIfDebugLogMask	INTEGER

WfMplsAtmIfStatusEntry
SEQUENCE
	wfMplsAtmIfOperStatus	INTEGER
	wfMplsAtmIfStatusLineNumber	INTEGER
	wfMplsAtmIfCircuit	INTEGER
	wfMplsAtmIfTotalSess	Counter
	wfMplsAtmIfTotalVcs	Counter
	wfMplsAtmIfAllocVcs	Counter

WfMplsAtmSessConfEntry
SEQUENCE
	wfMplsAtmSessDelete	INTEGER
	wfMplsAtmSessAdminStatus	INTEGER
	wfMplsAtmSessConfLineNumber	INTEGER
	wfMplsAtmSessConfIndex	INTEGER
	wfMplsAtmSessConfDefVclVpi	INTEGER
	wfMplsAtmSessConfDefVclVci	INTEGER
	wfMplsAtmSessConfVcRangeVpi	INTEGER
	wfMplsAtmSessConfVcRangeMinVci	INTEGER
	wfMplsAtmSessConfVcRangeMaxVci	INTEGER
	wfMplsAtmSessDefVclXmtPeakCellRate	INTEGER
	wfMplsAtmSessDefVclXmtSustainableCellRate	INTEGER
	wfMplsAtmSessDefVclXmtBurstSize	INTEGER
	wfMplsAtmSessDefVclXmtQosClass	INTEGER
	wfMplsAtmSessDefVclRcvPeakCellRate	INTEGER
	wfMplsAtmSessDefVclRcvSustainableCellRate	INTEGER
	wfMplsAtmSessDefVclRcvBurstSize	INTEGER
	wfMplsAtmSessDefVclRcvQosClass	INTEGER
	wfMplsAtmSessDefVclAalType	INTEGER
	wfMplsAtmSessDefVclAalCpcsTransmitSduSize	INTEGER
	wfMplsAtmSessDefVclAalCpcsReceiveSduSize	INTEGER
	wfMplsAtmSessDefVclAalEncapsType	INTEGER
	wfMplsAtmSessDefVclCongestionIndication	INTEGER
	wfMplsAtmSessDefVclCellLossPriority	INTEGER
	wfMplsAtmSessDefVclXmtTagging	INTEGER
	wfMplsAtmSessDefVclRcvTagging	INTEGER

WfMplsAtmSessStatusEntry
SEQUENCE
	wfMplsAtmSessOperStatus	INTEGER
	wfMplsAtmSessStatusLineNumber	INTEGER
	wfMplsAtmSessStatusIndex	INTEGER
	wfMplsAtmSessActualVcRangeVpi	INTEGER
	wfMplsAtmSessActualVcRangeMinVci	INTEGER
	wfMplsAtmSessActualVcRangeMaxVci	INTEGER
	wfMplsAtmSessNegotiatedVcRangeVpi	INTEGER
	wfMplsAtmSessNegotiatedVcRangeMinVci	INTEGER
	wfMplsAtmSessNegotiatedVcRangeMaxVci	INTEGER
	wfMplsAtmSessInboundInuseVcs	Counter
	wfMplsAtmSessOutboundInuseVcs	Counter

WfMplsAtmVclEntry
SEQUENCE
	wfMplsAtmVclLineNumber	INTEGER
	wfMplsAtmVclVpi	INTEGER
	wfMplsAtmVclVci	INTEGER
	wfMplsAtmVclLdpIndex	INTEGER
	wfMplsAtmVclDirection	INTEGER
	wfMplsAtmVclState	INTEGER
	wfMplsAtmVclType	INTEGER
	wfMplsAtmVclLastChange	TimeTicks
	wfMplsAtmVclXmtPeakCellRate	INTEGER
	wfMplsAtmVclXmtSustainableCellRate	INTEGER
	wfMplsAtmVclXmtBurstSize	INTEGER
	wfMplsAtmVclXmtQosClass	INTEGER
	wfMplsAtmVclRcvPeakCellRate	INTEGER
	wfMplsAtmVclRcvSustainableCellRate	INTEGER
	wfMplsAtmVclRcvBurstSize	INTEGER
	wfMplsAtmVclRcvQosClass	INTEGER
	wfMplsAtmVclAalType	INTEGER
	wfMplsAtmVclAalCpcsTransmitSduSize	INTEGER
	wfMplsAtmVclAalCpcsReceiveSduSize	INTEGER
	wfMplsAtmVclAalEncapsType	INTEGER
	wfMplsAtmVclCongestionIndication	INTEGER
	wfMplsAtmVclCellLossPriority	INTEGER
	wfMplsAtmVclXmtTagging	INTEGER
	wfMplsAtmVclRcvTagging	INTEGER

Defined Values

wfMplsAtm		1.3.6.1.4.1.18.3.5.9.16.1
OBJECT IDENTIFIER

wfMplsAtmIfConfTable		1.3.6.1.4.1.18.3.5.9.16.1.1
MPLS ATM interface configuration table - This tabulates the ATM interfaces within an mpls protocol group. All interfaces are indexed according to their line number. There is one ATM interface per MPLS LDP session, but there might be more LDP sessions per ATM interface.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WfMplsAtmIfConfEntry

wfMplsAtmIfConfEntry		1.3.6.1.4.1.18.3.5.9.16.1.1.1
MPLS ATM interface configuration entries.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WfMplsAtmIfConfEntry

wfMplsAtmIfCreate		1.3.6.1.4.1.18.3.5.9.16.1.1.1.1
Create/Delete parameter. Default is created. Users modify this object in order to create/delete MPLS ATM interfaces
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	created(1), deleted(2)

wfMplsAtmIfAdminStatus		1.3.6.1.4.1.18.3.5.9.16.1.1.1.2
Enable/Disable parameter. Default is enabled.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

wfMplsAtmIfConfLineNumber		1.3.6.1.4.1.18.3.5.9.16.1.1.1.3
The line number of the driver line to which the interface belongs.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wfMplsAtmIfDebugLogMask		1.3.6.1.4.1.18.3.5.9.16.1.1.1.4
Log bits for debug messages. This values above can be used separately, or OR'd together for a combination of debug levels.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	none(1), fsm(16), other(128), all(255)

wfMplsAtmIfStatusTable		1.3.6.1.4.1.18.3.5.9.16.1.2
MPLS ATM interface status table - This tabulates the ATM interfaces within an mpls protocol group. All interfaces are indexed according to their line number. There is one ATM interface per MPLS LDP session, but there might be multiple LDP sessions per ATM interface.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WfMplsAtmIfStatusEntry

wfMplsAtmIfStatusEntry		1.3.6.1.4.1.18.3.5.9.16.1.2.1
MPLS ATM interface status entries.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WfMplsAtmIfStatusEntry

wfMplsAtmIfOperStatus		1.3.6.1.4.1.18.3.5.9.16.1.2.1.1
The current state of the MPLS ATM interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	down(1), init(2), up(3), cleanup(4), notpresent(5)

wfMplsAtmIfStatusLineNumber		1.3.6.1.4.1.18.3.5.9.16.1.2.1.2
The line number of the driver line to which the interface belongs.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wfMplsAtmIfCircuit		1.3.6.1.4.1.18.3.5.9.16.1.2.1.3
The circuit number of the circuit to which the interface belongs.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..1023

wfMplsAtmIfTotalSess		1.3.6.1.4.1.18.3.5.9.16.1.2.1.4
The total number of LDPs up running.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

wfMplsAtmIfTotalVcs		1.3.6.1.4.1.18.3.5.9.16.1.2.1.5
The total number of VCs either in use, or available on this interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

wfMplsAtmIfAllocVcs		1.3.6.1.4.1.18.3.5.9.16.1.2.1.6
The number of VCs which are currently allocated for different LDP sessions on this interface. wfMplsAtmTotalVcs minus the value of this object results in knowning how many VCs are still available to allocate to new LDP sessions on this interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

wfMplsAtmSessConfTable		1.3.6.1.4.1.18.3.5.9.16.1.3
This is the ATM related configuration table for every LDP session.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WfMplsAtmSessConfEntry

wfMplsAtmSessConfEntry		1.3.6.1.4.1.18.3.5.9.16.1.3.1
Entry definition.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WfMplsAtmSessConfEntry

wfMplsAtmSessDelete		1.3.6.1.4.1.18.3.5.9.16.1.3.1.1
Create/delete MIB instance parameter.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	create(1), delete(2)

wfMplsAtmSessAdminStatus		1.3.6.1.4.1.18.3.5.9.16.1.3.1.2
Specifies the desired administrative state of the VCL. The up and down states indicate that the traffic flow is enabled and disabled respectively for the VCL.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

wfMplsAtmSessConfLineNumber		1.3.6.1.4.1.18.3.5.9.16.1.3.1.3
Uniquely identifies the interface (port) that contains the appropriate management information. We use line number here.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wfMplsAtmSessConfIndex		1.3.6.1.4.1.18.3.5.9.16.1.3.1.4
LDP session index number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..65535

wfMplsAtmSessConfDefVclVpi		1.3.6.1.4.1.18.3.5.9.16.1.3.1.5
The VPI value of the default VC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..255

wfMplsAtmSessConfDefVclVci		1.3.6.1.4.1.18.3.5.9.16.1.3.1.6
The VCI value of the default VC. It should not in the configured VC range for any LDP session.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	32..65535

wfMplsAtmSessConfVcRangeVpi		1.3.6.1.4.1.18.3.5.9.16.1.3.1.7
The VPI value of the VCs in this LDP session.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..255

wfMplsAtmSessConfVcRangeMinVci		1.3.6.1.4.1.18.3.5.9.16.1.3.1.8
The minimum VCI value of the configured LDP session.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	32..65535

wfMplsAtmSessConfVcRangeMaxVci		1.3.6.1.4.1.18.3.5.9.16.1.3.1.9
The maximum VCI value of the configured LDP session.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	32..65535

wfMplsAtmSessDefVclXmtPeakCellRate		1.3.6.1.4.1.18.3.5.9.16.1.3.1.10
Transmit (Forward) Peak Cell Rate in cells/second. This specifies the upper bound on the traffic that can be submitted on an ATM connection. 0 means best effort peak cell rate.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wfMplsAtmSessDefVclXmtSustainableCellRate		1.3.6.1.4.1.18.3.5.9.16.1.3.1.11
Transmit (Forward) Sustainable Cell Rate in cells/second. This specifies the upper bound on the conforming average rate of an ATM connection, where 'average rate' is the number of cells transmitted divided by the 'duration of the connection'. 0 means best effort sustainable cell rate.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wfMplsAtmSessDefVclXmtBurstSize		1.3.6.1.4.1.18.3.5.9.16.1.3.1.12
Transmit (Forward) Burst Size in cells.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	default(40)

wfMplsAtmSessDefVclXmtQosClass		1.3.6.1.4.1.18.3.5.9.16.1.3.1.13
Transmit (Forward) Quality of Service as specified in Appendix A, Section 4 of the ATM Forum UNI Specification, Version 3.0
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	class0(1), class1(2), class2(3), class3(4)

wfMplsAtmSessDefVclRcvPeakCellRate		1.3.6.1.4.1.18.3.5.9.16.1.3.1.14
Receive (Backward) Peak Cell Rate in cells/second. This specifies the upper bound on the traffic that can be submitted on an ATM connection. 0 means best effort peak cell rate.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wfMplsAtmSessDefVclRcvSustainableCellRate		1.3.6.1.4.1.18.3.5.9.16.1.3.1.15
Receive (Backward) Sustainable Cell Rate in cells/second. This specifies the upper bound on the conforming average rate of an ATM connection, where 'average rate' is the number of cells transmitted divided by the 'duration of the connection'. 0 means best effort sustainable cell rate.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wfMplsAtmSessDefVclRcvBurstSize		1.3.6.1.4.1.18.3.5.9.16.1.3.1.16
Receive (Backward) Burst Size in cells.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	default(40)

wfMplsAtmSessDefVclRcvQosClass		1.3.6.1.4.1.18.3.5.9.16.1.3.1.17
Receive (Backward) Quality of Service as specified in Appendix A, Section 4 of the ATM Forum UNI Specification, Version 3.0
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	class0(1), class1(2), class2(3), class3(4)

wfMplsAtmSessDefVclAalType		1.3.6.1.4.1.18.3.5.9.16.1.3.1.18
The type of AAL used on the VCL.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	type1(1), type34(2), type5(3), other(4), unknown(5)

wfMplsAtmSessDefVclAalCpcsTransmitSduSize		1.3.6.1.4.1.18.3.5.9.16.1.3.1.19
The maximum AAL CPCS SDU size in octets that is supported on the transmit direction of this VCC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..65535

wfMplsAtmSessDefVclAalCpcsReceiveSduSize		1.3.6.1.4.1.18.3.5.9.16.1.3.1.20
The maximum AAL CPCS SDU size in octets that is supported on the receive direction of this VCC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..65535

wfMplsAtmSessDefVclAalEncapsType		1.3.6.1.4.1.18.3.5.9.16.1.3.1.21
The type of data encapsulation used over both AAL3/4 and AAL5 SSCS layer. Currently, the only values supported are : ATM_VCLENCAPS_LLCENCAPS - RFC1483 ATM_VCLENCAPS_ROUTEDPROTO - NONE
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	unknown(1), llcencaps(2), null(3), other(4)

wfMplsAtmSessDefVclCongestionIndication		1.3.6.1.4.1.18.3.5.9.16.1.3.1.22
The desired state of the Congestion Indication (CI) bit in the payload field of each ATM cell for this VCL.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	off(1), on(2)

wfMplsAtmSessDefVclCellLossPriority		1.3.6.1.4.1.18.3.5.9.16.1.3.1.23
The desired state of the Cell Loss Priority (CLP) bit in the ATM header of each cell for this VCL.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	off(1), on(2)

wfMplsAtmSessDefVclXmtTagging		1.3.6.1.4.1.18.3.5.9.16.1.3.1.24
Tagging forward VC messages if peak/sustainable rates exceeded
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	on(1), off(2)

wfMplsAtmSessDefVclRcvTagging		1.3.6.1.4.1.18.3.5.9.16.1.3.1.25
Tagging backward VC messages if peak/sustainable rates exceeded
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	on(1), off(2)

wfMplsAtmSessStatusTable		1.3.6.1.4.1.18.3.5.9.16.1.4
This is the ATM related status table for every LDP session.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WfMplsAtmSessStatusEntry

wfMplsAtmSessStatusEntry		1.3.6.1.4.1.18.3.5.9.16.1.4.1
Entry definition.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WfMplsAtmSessStatusEntry

wfMplsAtmSessOperStatus		1.3.6.1.4.1.18.3.5.9.16.1.4.1.1
The ATM related LDP session state.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	down(1), init(2), up(3), cleanup(4), notpresent(5)

wfMplsAtmSessStatusLineNumber		1.3.6.1.4.1.18.3.5.9.16.1.4.1.2
Uniquely identifies the interface (port) that contains the appropriate management information. We use line number here.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wfMplsAtmSessStatusIndex		1.3.6.1.4.1.18.3.5.9.16.1.4.1.3
LDP session index number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..65535

wfMplsAtmSessActualVcRangeVpi		1.3.6.1.4.1.18.3.5.9.16.1.4.1.4
The VPI value of the actually allowable VC range for this session. The maximum VPI value cannot exceed the value allowable by the wfAtmInterfaceMaxActiveVpiBits.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

wfMplsAtmSessActualVcRangeMinVci		1.3.6.1.4.1.18.3.5.9.16.1.4.1.5
The minimum VCI value of the actually allowable VC range for LDP session. The maximum VCI value cannot exceed the value allowable by the wfAtmInterfaceMaxActiveVciBits.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	32..65535

wfMplsAtmSessActualVcRangeMaxVci		1.3.6.1.4.1.18.3.5.9.16.1.4.1.6
The maximum VCI value of the actually allowable VC range for LDP session. The maximum VCI value cannot exceed the value allowable by the wfAtmInterfaceMaxActiveVciBits.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	32..65535

wfMplsAtmSessNegotiatedVcRangeVpi		1.3.6.1.4.1.18.3.5.9.16.1.4.1.7
The VPI value of the VCs negotiated with LDP peer for this LDP session. The maximum VPI value cannot exceed the value allowable by the wfAtmInterfaceMaxActiveVpiBits. -1 means it is not possible.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	-1..255

wfMplsAtmSessNegotiatedVcRangeMinVci		1.3.6.1.4.1.18.3.5.9.16.1.4.1.8
The minimum VCI value of VCs negotiated with LDP peer for this LDP session. The maximum VCI value cannot exceed the value allowable by the wfAtmInterfaceMaxActiveVciBits.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	32..65535

wfMplsAtmSessNegotiatedVcRangeMaxVci		1.3.6.1.4.1.18.3.5.9.16.1.4.1.9
The maximum VCI value of VCs negotiated with LDP peer for this LDP session. The maximum VCI value cannot exceed the value allowable by the wfAtmInterfaceMaxActiveVciBits.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	32..65535

wfMplsAtmSessInboundInuseVcs		1.3.6.1.4.1.18.3.5.9.16.1.4.1.10
number of VCs opened for inbound LSP.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

wfMplsAtmSessOutboundInuseVcs		1.3.6.1.4.1.18.3.5.9.16.1.4.1.11
number of VCs opened for outbound LSP.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

wfMplsAtmVclTable		1.3.6.1.4.1.18.3.5.9.16.1.5
Read-only per VC infomation.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WfMplsAtmVclEntry

wfMplsAtmVclEntry		1.3.6.1.4.1.18.3.5.9.16.1.5.1
Entry definition.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WfMplsAtmVclEntry

wfMplsAtmVclLineNumber		1.3.6.1.4.1.18.3.5.9.16.1.5.1.1
Uniquely identifies the interface (port) that contains the appropriate management information. We use line number here.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wfMplsAtmVclVpi		1.3.6.1.4.1.18.3.5.9.16.1.5.1.2
The VPI value of the VCL. The maximum VPI value cannot exceed the value allowable by the wfMplsAtmInterfaceMaxActiveVpiBits.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wfMplsAtmVclVci		1.3.6.1.4.1.18.3.5.9.16.1.5.1.3
The VCI value of the VCL. The maximum VCI value cannot exceed the value allowable by the wfMplsAtmInterfaceMaxActiveVciBits.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wfMplsAtmVclLdpIndex		1.3.6.1.4.1.18.3.5.9.16.1.5.1.4
Uniquely identifies the LDP session number in this interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wfMplsAtmVclDirection		1.3.6.1.4.1.18.3.5.9.16.1.5.1.5
The direction of LSP
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	inbound(1), outbound(2), duplex(3)

wfMplsAtmVclState		1.3.6.1.4.1.18.3.5.9.16.1.5.1.6
The VC state.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	down(1), init(2), up(3), cleanup(4), notpresent(5)

wfMplsAtmVclType		1.3.6.1.4.1.18.3.5.9.16.1.5.1.7
default VC or normal LSP VC.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	default(1), lsp(2), unknown(3)

wfMplsAtmVclLastChange		1.3.6.1.4.1.18.3.5.9.16.1.5.1.8
The value of MIBII's sysUpTime at the time this VCL entered its current operational state.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

wfMplsAtmVclXmtPeakCellRate		1.3.6.1.4.1.18.3.5.9.16.1.5.1.9
Transmit (Forward) Peak Cell Rate in cells/second. This specifies the upper bound on the traffic that can be submitted on an ATM connection.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	default(4716)

wfMplsAtmVclXmtSustainableCellRate		1.3.6.1.4.1.18.3.5.9.16.1.5.1.10
Transmit (Forward) Sustainable Cell Rate in cells/second. This specifies the upper bound on the conforming average rate of an ATM connection, where 'average rate' is the number of cells transmitted divided by the 'duration of the connection'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	default(4716)

wfMplsAtmVclXmtBurstSize		1.3.6.1.4.1.18.3.5.9.16.1.5.1.11
Transmit (Forward) Burst Size in cells.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	default(40)

wfMplsAtmVclXmtQosClass		1.3.6.1.4.1.18.3.5.9.16.1.5.1.12
Transmit (Forward) Quality of Service as specified in Appendix A, Section 4 of the ATM Forum UNI Specification, Version 3.0
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	class0(1), class1(2), class2(3), class3(4)

wfMplsAtmVclRcvPeakCellRate		1.3.6.1.4.1.18.3.5.9.16.1.5.1.13
Receive (Backward) Peak Cell Rate in cells/second. This specifies the upper bound on the traffic that can be submitted on an ATM connection.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	default(4716)

wfMplsAtmVclRcvSustainableCellRate		1.3.6.1.4.1.18.3.5.9.16.1.5.1.14
Receive (Backward) Sustainable Cell Rate in cells/second. This specifies the upper bound on the conforming average rate of an ATM connection, where 'average rate' is the number of cells transmitted divided by the 'duration of the connection'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	default(4716)

wfMplsAtmVclRcvBurstSize		1.3.6.1.4.1.18.3.5.9.16.1.5.1.15
Receive (Backward) Burst Size in cells.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	default(40)

wfMplsAtmVclRcvQosClass		1.3.6.1.4.1.18.3.5.9.16.1.5.1.16
Receive (Backward) Quality of Service as specified in Appendix A, Section 4 of the ATM Forum UNI Specification, Version 3.0
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	class0(1), class1(2), class2(3), class3(4)

wfMplsAtmVclAalType		1.3.6.1.4.1.18.3.5.9.16.1.5.1.17
The type of AAL used on the VCL.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	type1(1), type34(2), type5(3), other(4), unknown(5)

wfMplsAtmVclAalCpcsTransmitSduSize		1.3.6.1.4.1.18.3.5.9.16.1.5.1.18
The maximum AAL CPCS SDU size in octets that is supported on the transmit direction of this VCC.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..65535

wfMplsAtmVclAalCpcsReceiveSduSize		1.3.6.1.4.1.18.3.5.9.16.1.5.1.19
The maximum AAL CPCS SDU size in octets that is supported on the receive direction of this VCC.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..65535

wfMplsAtmVclAalEncapsType		1.3.6.1.4.1.18.3.5.9.16.1.5.1.20
The type of data encapsulation used over both AAL3/4 and AAL5 SSCS layer. Currently, the only values supported are : ATM_VCLENCAPS_LLCENCAPS - RFC1483 ATM_VCLENCAPS_ROUTEDPROTO - NONE
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), llcencaps(2), null(3), other(4)

wfMplsAtmVclCongestionIndication		1.3.6.1.4.1.18.3.5.9.16.1.5.1.21
The desired state of the Congestion Indication (CI) bit in the payload field of each ATM cell for this VCL.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	off(1), on(2)

wfMplsAtmVclCellLossPriority		1.3.6.1.4.1.18.3.5.9.16.1.5.1.22
The desired state of the Cell Loss Priority (CLP) bit in the ATM header of each cell for this VCL.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	off(1), on(2)

wfMplsAtmVclXmtTagging		1.3.6.1.4.1.18.3.5.9.16.1.5.1.23
Tagging forward VC messages if peak/sustainable rates exceeded
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	on(1), off(2)

wfMplsAtmVclRcvTagging		1.3.6.1.4.1.18.3.5.9.16.1.5.1.24
Tagging backward VC messages if peak/sustainable rates exceeded
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	on(1), off(2)