Wellfleet-MPLS-LDP-MIB

File: Wellfleet-MPLS-LDP-MIB.mib (18125 bytes)

Imported modules

RFC-1212 Wellfleet-COMMON-MIB RFC1155-SMI

Imported symbols

OBJECT-TYPE wfMplsLdpGroup IpAddress

Defined Types

WfMplsLdpSessCfgEntry  
SEQUENCE    
  wfMplsLdpSessCfgCreate INTEGER
  wfMplsLdpSessCfgEnable INTEGER
  wfMplsLdpSessCfgSlot INTEGER
  wfMplsLdpSessCfgIndex INTEGER
  wfMplsLdpSessCfgCircuit INTEGER
  wfMplsLdpSessCfgLocalIpAddress IpAddress
  wfMplsLdpSessCfgLocalTcpPort INTEGER
  wfMplsLdpSessCfgRemoteIpAddress IpAddress
  wfMplsLdpSessCfgRemoteTcpPort INTEGER
  wfMplsLdpSessCfgRoutesConfigMode INTEGER
  wfMplsLdpSessCfgHoldTime INTEGER
  wfMplsLdpSessCfgProto INTEGER
  wfMplsLdpSessCfgAggregation INTEGER
  wfMplsLdpSessCfgDebugLevel INTEGER
  wfMplsLdpSessCfgReqBindRetryTime INTEGER
  wfMplsLdpSessCfgReqBindRetries INTEGER

WfMplsLdpSessActualEntry  
SEQUENCE    
  wfMplsLdpSessActualIndex INTEGER
  wfMplsLdpSessActualCircuit INTEGER
  wfMplsLdpSessActualState INTEGER
  wfMplsLdpSessActualPeerState INTEGER
  wfMplsLdpSessActualLocalIpAddress IpAddress
  wfMplsLdpSessActualLocalTcpPort INTEGER
  wfMplsLdpSessActualRemoteIpAddress IpAddress
  wfMplsLdpSessActualRemoteTcpPort INTEGER
  wfMplsLdpSessActualHoldTime INTEGER
  wfMplsLdpSessActualRoutesConfigMode INTEGER
  wfMplsLdpSessActualTCPConnectionRole INTEGER
  wfMplsLdpSessActualSlot INTEGER

WfMplsLdpCfgRouteEntry  
SEQUENCE    
  wfMplsLdpCfgRouteCreate INTEGER
  wfMplsLdpCfgRouteEnable INTEGER
  wfMplsLdpCfgRouteCct INTEGER
  wfMplsLdpCfgRouteSessId INTEGER
  wfMplsLdpCfgRouteIndex INTEGER
  wfMplsLdpCfgRouteDestination IpAddress
  wfMplsLdpCfgRouteMask IpAddress
  wfMplsLdpCfgRouteState INTEGER

WfMplsLdpLibEntry  
SEQUENCE    
  wfMplsLdpLibCct INTEGER
  wfMplsLdpLibSessId INTEGER
  wfMplsLdpLibDest IpAddress
  wfMplsLdpLibMid INTEGER
  wfMplsLdpLibLabel INTEGER
  wfMplsLdpLibEncaps INTEGER
  wfMplsLdpLibDirection INTEGER
  wfMplsLdpLibSlot INTEGER
  wfMplsLdpLibIndex INTEGER

Defined Values

wfMplsLdpSessCfgTable 1.3.6.1.4.1.18.3.5.9.15.1
MPLS LDP session table - This tabulates the LDP session within an mpls protocol group. All sessions are indexed according to the physical slot and the associated interface circuit number and session index. There can be more LDP sessions per L2 MPLS interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfMplsLdpSessCfgEntry

wfMplsLdpSessCfgEntry 1.3.6.1.4.1.18.3.5.9.15.1.1
MPLS LDP session entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfMplsLdpSessCfgEntry  

wfMplsLdpSessCfgCreate 1.3.6.1.4.1.18.3.5.9.15.1.1.1
Create/Delete parameter. Default is created. Users modify this object in order to create/delete MPLS LDP sessions
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfMplsLdpSessCfgEnable 1.3.6.1.4.1.18.3.5.9.15.1.1.2
Enable/Disable parameter. Default is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfMplsLdpSessCfgSlot 1.3.6.1.4.1.18.3.5.9.15.1.1.3
The slot number this LDP session is configured on.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfMplsLdpSessCfgIndex 1.3.6.1.4.1.18.3.5.9.15.1.1.4
The Session index identifies this particular LDP session on an interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfMplsLdpSessCfgCircuit 1.3.6.1.4.1.18.3.5.9.15.1.1.5
The circuit number of the circuit to which the session belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1023  

wfMplsLdpSessCfgLocalIpAddress 1.3.6.1.4.1.18.3.5.9.15.1.1.6
The IP address of this MPLS device for the purpose of establishing the LDP peer to peer session.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

wfMplsLdpSessCfgLocalTcpPort 1.3.6.1.4.1.18.3.5.9.15.1.1.7
The TCP port address of this MPLS device for the purpose of establishing the LDP peer to peer session.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

wfMplsLdpSessCfgRemoteIpAddress 1.3.6.1.4.1.18.3.5.9.15.1.1.8
The IP address of the remote MPLS device for the purpose of establishing the LDP peer to peer session.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

wfMplsLdpSessCfgRemoteTcpPort 1.3.6.1.4.1.18.3.5.9.15.1.1.9
The TCP port of the remote MPLS device for the purpose of establishing the LDP peer to peer session.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

wfMplsLdpSessCfgRoutesConfigMode 1.3.6.1.4.1.18.3.5.9.15.1.1.10
Indicates whether network routes should be discovered by a routing protocol(auto) or should be Manually configured(manual), see wfMplsLdpCfgRouteTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), manual(2)  

wfMplsLdpSessCfgHoldTime 1.3.6.1.4.1.18.3.5.9.15.1.1.11
the Hold Time indicates the maximum time in seconds that may elapse between the receipt of successive PDUs from the LSR peer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..240  

wfMplsLdpSessCfgProto 1.3.6.1.4.1.18.3.5.9.15.1.1.12
The routing protocols used by MPLS.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ospf(1), rip(2), hybridospf(3), hybridrip(4)  

wfMplsLdpSessCfgAggregation 1.3.6.1.4.1.18.3.5.9.15.1.1.13
Enable/Disable aggregation. Default is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfMplsLdpSessCfgDebugLevel 1.3.6.1.4.1.18.3.5.9.15.1.1.14
Debug Levels - This attribute is used to assign the level of DEBUG message to be logged for each LDP session.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER one(1), two(2), three(3), debug(4)  

wfMplsLdpSessCfgReqBindRetryTime 1.3.6.1.4.1.18.3.5.9.15.1.1.15
It indicates the maximum time in seconds that may elapse between two consecutive request bind in case of no reply.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..240  

wfMplsLdpSessCfgReqBindRetries 1.3.6.1.4.1.18.3.5.9.15.1.1.16
It indicates the number of retry times.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..240  

wfMplsLdpSessActualTable 1.3.6.1.4.1.18.3.5.9.15.2
MPLS LDP interface actual table - read-only table containing LDP peer status, and actual LDP information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfMplsLdpSessActualEntry

wfMplsLdpSessActualEntry 1.3.6.1.4.1.18.3.5.9.15.2.1
MPLS LDP interface entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfMplsLdpSessActualEntry  

wfMplsLdpSessActualIndex 1.3.6.1.4.1.18.3.5.9.15.2.1.1
The Session index identifies this particular LDP session on the interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfMplsLdpSessActualCircuit 1.3.6.1.4.1.18.3.5.9.15.2.1.2
The circuit number of the circuit to which the session belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1023  

wfMplsLdpSessActualState 1.3.6.1.4.1.18.3.5.9.15.2.1.3
The current state of the MPLS LDP session
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), init(3), notpresent(4)  

wfMplsLdpSessActualPeerState 1.3.6.1.4.1.18.3.5.9.15.2.1.4
The current state of MPLS LDP session with the remote MPLS device
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER initialized(1), opensend(2), openrec(3), operational(4)  

wfMplsLdpSessActualLocalIpAddress 1.3.6.1.4.1.18.3.5.9.15.2.1.5
The actual IP address that LDP used to establish the LDP peer to peer session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

wfMplsLdpSessActualLocalTcpPort 1.3.6.1.4.1.18.3.5.9.15.2.1.6
The actual local TCP port address that this LDP used to establish the LDP peer to peer session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

wfMplsLdpSessActualRemoteIpAddress 1.3.6.1.4.1.18.3.5.9.15.2.1.7
The actual remote IP address that LDP used to establish the LDP peer to peer session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

wfMplsLdpSessActualRemoteTcpPort 1.3.6.1.4.1.18.3.5.9.15.2.1.8
The actual TCP port that LDP used to establish the LDP peer to peer session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

wfMplsLdpSessActualHoldTime 1.3.6.1.4.1.18.3.5.9.15.2.1.9
the actual Hold Time that LDP used to indicate the maximum time in seconds that may elapse between the receipt of successive PDUs from the LSR peer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..240  

wfMplsLdpSessActualRoutesConfigMode 1.3.6.1.4.1.18.3.5.9.15.2.1.10
Indicates whether network routes are discovered by a routing protocol(auto) or are Manually configured(manual), see wfMplsLdpCfgRouteTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER auto(1), manual(2)  

wfMplsLdpSessActualTCPConnectionRole 1.3.6.1.4.1.18.3.5.9.15.2.1.11
Indicates the TCP connection roles between the peers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER active(1), passive(2)  

wfMplsLdpSessActualSlot 1.3.6.1.4.1.18.3.5.9.15.2.1.12
Indicates the slot on which the LDP session is running.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfMplsLdpCfgRouteTable 1.3.6.1.4.1.18.3.5.9.15.3
MPLS LDP configured route table -
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfMplsLdpCfgRouteEntry

wfMplsLdpCfgRouteEntry 1.3.6.1.4.1.18.3.5.9.15.3.1
MPLS LDP configured route entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfMplsLdpCfgRouteEntry  

wfMplsLdpCfgRouteCreate 1.3.6.1.4.1.18.3.5.9.15.3.1.1
Create/Delete parameter. Default is created. Users modify this object in order to create/delete MPLS LSP
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfMplsLdpCfgRouteEnable 1.3.6.1.4.1.18.3.5.9.15.3.1.2
Enable/Disable parameter. Default is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfMplsLdpCfgRouteCct 1.3.6.1.4.1.18.3.5.9.15.3.1.3
The circuit munber to which the route associates with.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1023  

wfMplsLdpCfgRouteSessId 1.3.6.1.4.1.18.3.5.9.15.3.1.4
The session identification munber to which the route associates with.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1023  

wfMplsLdpCfgRouteIndex 1.3.6.1.4.1.18.3.5.9.15.3.1.5
The index number of this route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfMplsLdpCfgRouteDestination 1.3.6.1.4.1.18.3.5.9.15.3.1.6
The netwrok prefix of this route.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

wfMplsLdpCfgRouteMask 1.3.6.1.4.1.18.3.5.9.15.3.1.7
The mask of this route.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

wfMplsLdpCfgRouteState 1.3.6.1.4.1.18.3.5.9.15.3.1.8
The current state of the MPLS LDP session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

wfMplsLdpLibTable 1.3.6.1.4.1.18.3.5.9.15.4
MPLS LDP Label Information Base table which contains LSPs that have been set up.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfMplsLdpLibEntry

wfMplsLdpLibEntry 1.3.6.1.4.1.18.3.5.9.15.4.1
MPLS LDP Label Information Base.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfMplsLdpLibEntry  

wfMplsLdpLibCct 1.3.6.1.4.1.18.3.5.9.15.4.1.1
The circuit munber to which the route associates with.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1023  

wfMplsLdpLibSessId 1.3.6.1.4.1.18.3.5.9.15.4.1.2
The session identification munber to which the LIB entry associates with.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1023  

wfMplsLdpLibDest 1.3.6.1.4.1.18.3.5.9.15.4.1.3
The destnation network prefix.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

wfMplsLdpLibMid 1.3.6.1.4.1.18.3.5.9.15.4.1.4
The merge id.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfMplsLdpLibLabel 1.3.6.1.4.1.18.3.5.9.15.4.1.5
The label of the lsp that this LIB entry identifies.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfMplsLdpLibEncaps 1.3.6.1.4.1.18.3.5.9.15.4.1.6
The lsp encapsulation type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER llcsnap(1), null(2)  

wfMplsLdpLibDirection 1.3.6.1.4.1.18.3.5.9.15.4.1.7
MPLS VC direction.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inbound(1), outbound(2), bidirectional(3)  

wfMplsLdpLibSlot 1.3.6.1.4.1.18.3.5.9.15.4.1.8
Slot on which this LSP got created
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfMplsLdpLibIndex 1.3.6.1.4.1.18.3.5.9.15.4.1.9
Index part of instance id
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor