Wellfleet-IF-MIB

File: Wellfleet-IF-MIB.mib (9898 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB
Wellfleet-COMMON-MIB

Imported symbols

Counter Gauge TimeTicks
OBJECT-TYPE DisplayString wfIfGroup

Defined Types

WfIfEntry  
SEQUENCE    
  wfIfIndex INTEGER
  wfIfDescr DisplayString
  wfIfType INTEGER
  wfIfMtu INTEGER
  wfIfSpeed Gauge
  wfIfPhysAddress OCTET STRING
  wfIfAdminStatus INTEGER
  wfIfOperStatus INTEGER
  wfIfLastChange TimeTicks
  wfIfInOctets Counter
  wfIfInUcastPkts Counter
  wfIfInNUCastPkts Counter
  wfIfInDiscards Counter
  wfIfInErrors Counter
  wfIfInUnknownProtos Counter
  wfIfOutOctets Counter
  wfIfOutUcastPkts Counter
  wfIfOutNUcastPkts Counter
  wfIfOutDiscards Counter
  wfIfOutErrors Counter
  wfIfOutQLen Gauge
  wfIfSpecific OBJECT IDENTIFIER

WfIfCfgEntry  
SEQUENCE    
  wfIfCfgIndex INTEGER
  wfIfCfgConformanceTesting INTEGER
  wfIfCfgSparseTableAdminStatus INTEGER

Defined Values

wfIf 1.3.6.1.4.1.18.3.5.1.3.1
OBJECT IDENTIFIER    

wfIfNumber 1.3.6.1.4.1.18.3.5.1.3.1.1
Total number of possible active interfaces
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfIfRegistrationMode 1.3.6.1.4.1.18.3.5.1.3.1.2
Method of instance specification Wellfleet Standard defines ifEntry instances by their router internal circuit number. Dial Circuit Unique is similar, but adds a bias to dial circuit instances so that a dial backup interface will have an ifEntry instance distinct from the primary interface. Neither selection is RFC 1213 compliant.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER wellfleetstandard(1), dialcircuitunique(2)  

wfIfTable 1.3.6.1.4.1.18.3.5.1.3.2
A table containing active interfaces
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfIfEntry

wfIfEntry 1.3.6.1.4.1.18.3.5.1.3.2.1
A particular interface
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfIfEntry  

wfIfIndex 1.3.6.1.4.1.18.3.5.1.3.2.1.1
Corresponds to same attribute of MIB-II's ifTable
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfIfDescr 1.3.6.1.4.1.18.3.5.1.3.2.1.2
Corresponds to same attribute of MIB-II's ifTable
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfIfType 1.3.6.1.4.1.18.3.5.1.3.2.1.3
Corresponds to same attribute of MIB-II's ifTable
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfIfMtu 1.3.6.1.4.1.18.3.5.1.3.2.1.4
Corresponds to same attribute of MIB-II's ifTable
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfIfSpeed 1.3.6.1.4.1.18.3.5.1.3.2.1.5
Corresponds to same attribute of MIB-II's ifTable
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfIfPhysAddress 1.3.6.1.4.1.18.3.5.1.3.2.1.6
Corresponds to same attribute of MIB-II's ifTable
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wfIfAdminStatus 1.3.6.1.4.1.18.3.5.1.3.2.1.7
Corresponds to same attribute of MIB-II's ifTable
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfIfOperStatus 1.3.6.1.4.1.18.3.5.1.3.2.1.8
Corresponds to same attribute of MIB-II's ifTable
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfIfLastChange 1.3.6.1.4.1.18.3.5.1.3.2.1.9
Corresponds to same attribute of MIB-II's ifTable
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

wfIfInOctets 1.3.6.1.4.1.18.3.5.1.3.2.1.10
Corresponds to same attribute of MIB-II's ifTable
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIfInUcastPkts 1.3.6.1.4.1.18.3.5.1.3.2.1.11
Corresponds to same attribute of MIB-II's ifTable
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIfInNUCastPkts 1.3.6.1.4.1.18.3.5.1.3.2.1.12
Corresponds to same attribute of MIB-II's ifTable
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIfInDiscards 1.3.6.1.4.1.18.3.5.1.3.2.1.13
Corresponds to same attribute of MIB-II's ifTable
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIfInErrors 1.3.6.1.4.1.18.3.5.1.3.2.1.14
Corresponds to same attribute of MIB-II's ifTable
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIfInUnknownProtos 1.3.6.1.4.1.18.3.5.1.3.2.1.15
Corresponds to same attribute of MIB-II's ifTable
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIfOutOctets 1.3.6.1.4.1.18.3.5.1.3.2.1.16
Corresponds to same attribute of MIB-II's ifTable
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIfOutUcastPkts 1.3.6.1.4.1.18.3.5.1.3.2.1.17
Corresponds to same attribute of MIB-II's ifTable
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIfOutNUcastPkts 1.3.6.1.4.1.18.3.5.1.3.2.1.18
Corresponds to same attribute of MIB-II's ifTable
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIfOutDiscards 1.3.6.1.4.1.18.3.5.1.3.2.1.19
Corresponds to same attribute of MIB-II's ifTable
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIfOutErrors 1.3.6.1.4.1.18.3.5.1.3.2.1.20
Corresponds to same attribute of MIB-II's ifTable
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIfOutQLen 1.3.6.1.4.1.18.3.5.1.3.2.1.21
Corresponds to same attribute of MIB-II's ifTable
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfIfSpecific 1.3.6.1.4.1.18.3.5.1.3.2.1.22
Corresponds to same attribute of MIB-II's ifTable
Status: mandatory Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

wfIfCfgTable 1.3.6.1.4.1.18.3.5.1.3.3
A table used to configure the rfc-1573 subagent
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfIfCfgEntry

wfIfCfgEntry 1.3.6.1.4.1.18.3.5.1.3.3.1
Single row used to configure rfc-1573 subagent for entire box
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfIfCfgEntry  

wfIfCfgIndex 1.3.6.1.4.1.18.3.5.1.3.3.1.1
Unique index for configuration table
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1  

wfIfCfgConformanceTesting 1.3.6.1.4.1.18.3.5.1.3.3.1.2
When enabled, this informs the system to ensure that all objects supported for rfc1573 in the box follow rfc1573's conformance guidelines. Objects that do not follow the guidelines will not be accessible.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfIfCfgSparseTableAdminStatus 1.3.6.1.4.1.18.3.5.1.3.3.1.3
When enabled, this informs the system of the method to use when dealing with sparse tables (i.e rows that contain columns that are not all supported ). allowed - the agent must do nothing when sparse tables are encountered. zerofill - the agent must return a zero value for unsupported columns
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER allowed(1), zerofill(2)