Wellfleet-FRSW-MIB

File: Wellfleet-FRSW-MIB.mib (174801 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB
Wellfleet-COMMON-MIB

Imported symbols

IpAddress Counter TimeTicks
Gauge OBJECT-TYPE DisplayString
wfFrswGroup

Defined Types

WfFrSwDlcmiEntry  
SEQUENCE    
  wfFrSwDlcmiDelete INTEGER
  wfFrSwDlcmiState INTEGER
  wfFrSwDlcmiNniEnable INTEGER
  wfFrSwDlcmiCircuit INTEGER
  wfFrSwDlcmiManagementType INTEGER
  wfFrSwL3NetAddress IpAddress
  wfFrSwDlcmiAddressLen INTEGER
  wfFrSwDlcmiControlByteDisable INTEGER
  wfFrSwDlcmiPollingInterval INTEGER
  wfFrSwDlcmiFullEnquiryInterval INTEGER
  wfFrSwDlcmiErrorThreshold INTEGER
  wfFrSwDlcmiMonitoredEvents INTEGER
  wfFrSwDlcmiRecoveryCounts INTEGER
  wfFrSwDlcmiMaxSupportedVCs INTEGER
  wfFrSwDlcmiVCsInUse INTEGER
  wfFrSwSwitchHdrErrors Counter
  wfFrSwDlcmiSequenceCount INTEGER
  wfFrSwDlcmiLastReceived INTEGER
  wfFrSwDlcmiActiveSeqCount INTEGER
  wfFrSwDlcmiActiveReceived INTEGER
  wfFrSwDlcmiPolls Counter
  wfFrSwDlcmiAlarmTimer INTEGER
  wfFrSwErrType INTEGER
  wfFrSwErrData OCTET STRING
  wfFrSwErrTime TimeTicks
  wfFrSwBcMeasurementInterval INTEGER
  wfFrSwDlcmiMcastNoBufferErrors Counter
  wfFrSwDlcmiFrameTooShortErrors Counter
  wfFrSwDlcmiFrameTooLongErrors Counter
  wfFrSwDlcmiIllegalDlciErrors Counter
  wfFrSwDlcmiUnknownDlciErrors Counter
  wfFrSwDlcmiProtocolErrors Counter
  wfFrSwDlcmiUnknownIEErrors Counter
  wfFrSwDlcmiSequenceErrors Counter
  wfFrSwDlcmiUnknownRPTErrors Counter
  wfFrSwDlcmiControlByteErrors Counter
  wfFrSwDlcmiFormatErrors Counter
  wfFrSwDlcmiOtherErrors Counter
  wfFrSwDlcmiStatus INTEGER
  wfFrSwDlcmiNewVCs Counter
  wfFrSwDlcmiDeletedVCs Counter
  wfFrSwDlcmiFullStatusSeq Counter
  wfFrSwDlcmiBidirect INTEGER
  wfFrSwDlcmiDteStatus INTEGER
  wfFrSwDlcmiDteSeqCount INTEGER
  wfFrSwDlcmiDteReceived INTEGER
  wfFrSwDlcmiDteLastReceived INTEGER
  wfFrSwDlcmiDtePolls Counter
  wfFrSwDlcmiDtePollingInterval INTEGER
  wfFrSwDlcmiDteFullEnquiryInterval INTEGER
  wfFrSwDlcmiDteErrorThreshold INTEGER
  wfFrSwDlcmiCrossNetEnable INTEGER
  wfFrSwDlcmiCrossNetPollingInterval INTEGER
  wfFrSwDlcmiCrossNetErrorThreshold INTEGER
  wfFrSwDlcmiCrossNetAsyncUpdateEnable INTEGER
  wfFrSwDlcmiBcMeasurementEnable INTEGER
  wfFrSwDlcmiAsyncUpdateEnable INTEGER
  wfFrSwDlcmiCrossNetListenEnable INTEGER
  wfFrSwDlcmiSvcDisable INTEGER
  wfFrSwDlcmiL2AddrType INTEGER
  wfFrSwDlcmiEscapeMode INTEGER
  wfFrSwDlcmiEscapeCircuit INTEGER
  wfFrSwDlcmiEscapeVcCount INTEGER
  wfFrSwDlcmiIwfMode INTEGER
  wfFrSwDlcmiSvcBillingEnable INTEGER
  wfFrSwDlcmiSpvcAgent INTEGER
  wfFrSwDlcmiCallAccDlciSelectionType INTEGER

WfFrSwCctEntry  
SEQUENCE    
  wfFrSwCctDelete INTEGER
  wfFrSwCctNumber INTEGER
  wfFrSwCctDlci INTEGER
  wfFrSwCctState INTEGER
  wfFrSwCctMulticast INTEGER
  wfFrSwCctInBc INTEGER
  wfFrSwCctOutBc INTEGER
  wfFrSwCctInBe INTEGER
  wfFrSwCctOutBe INTEGER
  wfFrSwCctInThroughput INTEGER
  wfFrSwCctOutThroughput INTEGER
  wfFrSwCctCreationTime TimeTicks
  wfFrSwCctLastTimeChange TimeTicks
  wfFrSwCctLocalSentNonDEFrames Counter
  wfFrSwCctLocalSentNonDEOctets Counter
  wfFrSwCctLocalSentDEFrames Counter
  wfFrSwCctLocalSentDEOctets Counter
  wfFrSwCctLocalSetFECNFrames Counter
  wfFrSwCctLocalSetFECNOctets Counter
  wfFrSwCctLocalSetBECNFrames Counter
  wfFrSwCctLocalSetBECNOctets Counter
  wfFrSwCctLocalSetDEFrames Counter
  wfFrSwCctLocalSetDEOctets Counter
  wfFrSwCctLocalDropNonDEFrames Counter
  wfFrSwCctLocalDropNonDEOctets Counter
  wfFrSwCctLocalDropDEFrames Counter
  wfFrSwCctLocalDropDEOctets Counter
  wfFrSwCctInactiveVCDropFrames Counter
  wfFrSwCctInactiveVCDropOctets Counter
  wfFrSwCctLocalRecvNonDEFrames Counter
  wfFrSwCctLocalRecvNonDEOctets Counter
  wfFrSwCctLocalRecvDEFrames Counter
  wfFrSwCctLocalRecvDEOctets Counter
  wfFrSwCctLocalRecvFECNFrames Counter
  wfFrSwCctLocalRecvFECNOctets Counter
  wfFrSwCctLocalRecvBECNFrames Counter
  wfFrSwCctLocalRecvBECNOctets Counter
  wfFrSwCctLocalRecentNonDEOctets Counter
  wfFrSwCctRemoteSentNonDEFrames Counter
  wfFrSwCctRemoteSentNonDEOctets Counter
  wfFrSwCctRemoteSentDEFrames Counter
  wfFrSwCctRemoteSentDEOctets Counter
  wfFrSwCctRemoteSetFECNFrames Counter
  wfFrSwCctRemoteSetFECNOctets Counter
  wfFrSwCctRemoteSetBECNFrames Counter
  wfFrSwCctRemoteSetBECNOctets Counter
  wfFrSwCctRemoteDropNonDEFrames Counter
  wfFrSwCctRemoteDropNonDEOctets Counter
  wfFrSwCctRemoteDropDEFrames Counter
  wfFrSwCctRemoteDropDEOctets Counter
  wfFrSwCctRemoteRecvNonDEFrames Counter
  wfFrSwCctRemoteRecvNonDEOctets Counter
  wfFrSwCctRemoteRecvDEFrames Counter
  wfFrSwCctRemoteRecvDEOctets Counter
  wfFrSwCctRemoteRecvFECNFrames Counter
  wfFrSwCctRemoteRecvFECNOctets Counter
  wfFrSwCctRemoteRecvBECNFrames Counter
  wfFrSwCctRemoteRecvBECNOctets Counter
  wfFrSwCctLocalBecnState INTEGER
  wfFrSwCctRemoteBecnState INTEGER
  wfFrSwCctLocalOrRemoteConnection INTEGER
  wfFrSwCctInBcOctets INTEGER
  wfFrSwCctStateSet INTEGER
  wfFrSwCctReportedStatus INTEGER
  wfFrSwCctReceivedStatus INTEGER
  wfFrSwCctCrossNetStatus INTEGER
  wfFrSwCctXNetSent INTEGER
  wfFrSwCctXNetReceived INTEGER
  wfFrSwCctXNetErrors Counter

WfFrSwTupleEntry  
SEQUENCE    
  wfFrSwTupleDelete INTEGER
  wfFrSwTupleIpAddrA IpAddress
  wfFrSwTupleDlciA INTEGER
  wfFrSwTupleIpAddrB IpAddress
  wfFrSwTupleDlciB INTEGER

WfFrSwMcastEntry  
SEQUENCE    
  wfFrSwMcastDelete INTEGER
  wfFrSwMcastIndex INTEGER
  wfFrSwMcastIpAddr IpAddress
  wfFrSwMcastDlci INTEGER
  wfFrSwMcastIndividualDlci INTEGER

WfFrSwUsageEntry  
SEQUENCE    
  wfFrSwUsageDelete INTEGER
  wfFrSwUsageCircuitNumber INTEGER
  wfFrSwUsageDlci INTEGER
  wfFrSwUsageIPAddress IpAddress
  wfFrSwUsageStartTimeStampHigh INTEGER
  wfFrSwUsageStartTimeStampLow INTEGER
  wfFrSwUsageEndTimeStampHigh INTEGER
  wfFrSwUsageEndTimeStampLow INTEGER
  wfFrSwUsageSentNonDEFramesHigh INTEGER
  wfFrSwUsageSentNonDEFramesLow INTEGER
  wfFrSwUsageSentNonDEOctetsHigh INTEGER
  wfFrSwUsageSentNonDEOctetsLow INTEGER
  wfFrSwUsageSentDEFramesHigh INTEGER
  wfFrSwUsageSentDEFramesLow INTEGER
  wfFrSwUsageSentDEOctetsHigh INTEGER
  wfFrSwUsageSentDEOctetsLow INTEGER
  wfFrSwUsageLastNonDEFramesHigh INTEGER
  wfFrSwUsageLastNonDEFramesLow INTEGER
  wfFrSwUsageLastNonDEOctetsHigh INTEGER
  wfFrSwUsageLastNonDEOctetsLow INTEGER
  wfFrSwUsageLastDEFramesHigh INTEGER
  wfFrSwUsageLastDEFramesLow INTEGER
  wfFrSwUsageLastDEOctetsHigh INTEGER
  wfFrSwUsageLastDEOctetsLow INTEGER
  wfFrSwUsageRemoteIPAddress IpAddress
  wfFrSwUsageRemoteDlci INTEGER

WfFrSwVcEntry  
SEQUENCE    
  wfFrSwVcDelete INTEGER
  wfFrSwVcCircuit INTEGER
  wfFrSwVcDlci INTEGER
  wfFrSwVcState INTEGER
  wfFrSwVcStateSet INTEGER
  wfFrSwVcMulticast INTEGER
  wfFrSwVcInBe INTEGER
  wfFrSwVcOutBe INTEGER
  wfFrSwVcInThroughput INTEGER
  wfFrSwVcOutThroughput INTEGER
  wfFrSwVcOutBc INTEGER
  wfFrSwVcInBc INTEGER
  wfFrSwVcInBcOctets INTEGER
  wfFrSwVcBecnState INTEGER
  wfFrSwVcReportedStatus INTEGER
  wfFrSwVcReceivedStatus INTEGER
  wfFrSwVcCrossNetStatus INTEGER
  wfFrSwVcXNetSent INTEGER
  wfFrSwVcXNetReceived INTEGER
  wfFrSwVcCalledIpAddr IpAddress
  wfFrSwVcCalledDlci INTEGER
  wfFrSwVcTrfPriority INTEGER
  wfFrSwVcCreationTime TimeTicks
  wfFrSwVcLastTimeChange TimeTicks
  wfFrSwVcTxNonDeFrames Counter
  wfFrSwVcTxNonDeOctets Counter
  wfFrSwVcTxDeFrames Counter
  wfFrSwVcTxDeOctets Counter
  wfFrSwVcSetFecnFrames Counter
  wfFrSwVcSetFecnOctets Counter
  wfFrSwVcSetBecnFrames Counter
  wfFrSwVcSetBecnOctets Counter
  wfFrSwVcSetDeFrames Counter
  wfFrSwVcSetDeOctets Counter
  wfFrSwVcDropNonDeFrames Counter
  wfFrSwVcDropNonDeOctets Counter
  wfFrSwVcDropDeFrames Counter
  wfFrSwVcDropDeOctets Counter
  wfFrSwVcInactiveVcDropFrames Counter
  wfFrSwVcInactiveVcDropOctets Counter
  wfFrSwVcRecvNonDeFrames Counter
  wfFrSwVcRecvNonDeOctets Counter
  wfFrSwVcRecvDeFrames Counter
  wfFrSwVcRecvDeOctets Counter
  wfFrSwVcRecvFecnFrames Counter
  wfFrSwVcRecvFecnOctets Counter
  wfFrSwVcRecvBecnFrames Counter
  wfFrSwVcRecvBecnOctets Counter
  wfFrSwVcRecentNonDeOctets Counter
  wfFrSwVcXNetErrors Counter
  wfFrSwVcDropExcessBurstFrames Counter
  wfFrSwVcDropExcessBurstOctets Counter
  wfFrSwVcInBeOctets INTEGER
  wfFrSwVcCfgInBe INTEGER
  wfFrSwVcRedirectAction INTEGER
  wfFrSwVcRedirectType INTEGER
  wfFrSwVcRedirectState INTEGER
  wfFrSwVcBackupCalledIpAddr IpAddress
  wfFrSwVcBackupCalledDlci INTEGER
  wfFrSwVcBackupCrossNetStatus INTEGER
  wfFrSwVcBackupCrossNetErrors INTEGER
  wfFrSwVcAtmIwfMode INTEGER
  wfFrSwVcAtmIwfVPI INTEGER
  wfFrSwVcAtmIwfVCI INTEGER
  wfFrSwVcAtmIwfLossPriorityPolicy INTEGER
  wfFrSwVcAtmIwfDePolicy INTEGER
  wfFrSwVcAtmIwfEfciPolicy INTEGER
  wfFrSwVcEscapeEnable INTEGER
  wfFrSwVcSpvcCallState INTEGER
  wfFrSwVcCallReqCalledAddr DisplayString
  wfFrSwVcCallReqDlciSelectionType INTEGER
  wfFrSwVcCallReqCalledDlci INTEGER
  wfFrSwVcCallReqRetryTimer INTEGER
  wfFrSwVcCallReqMaxRetries INTEGER

WfFrSwIsdnBaseEntry  
SEQUENCE    
  wfFrSwIsdnBaseDelete INTEGER
  wfFrSwIsdnBaseSlotNum INTEGER
  wfFrSwIsdnBaseAssocType INTEGER

WfFrSwIsdnAssocEntry  
SEQUENCE    
  wfFrSwIsdnAssocDelete INTEGER
  wfFrSwIsdnAssocSlotNum INTEGER
  wfFrSwIsdnAssocNum OCTET STRING
  wfFrSwIsdnAssocScrnEnable INTEGER
  wfFrSwIsdnAssocIndex INTEGER

WfFrSwIsdnUniEntry  
SEQUENCE    
  wfFrSwIsdnUniDelete INTEGER
  wfFrSwIsdnUniIndex INTEGER
  wfFrSwIsdnUniNum INTEGER
  wfFrSwIsdnUniState INTEGER

WfFrSwIsdnScrnEntry  
SEQUENCE    
  wfFrSwIsdnScrnDelete INTEGER
  wfFrSwIsdnScrnIndex INTEGER
  wfFrSwIsdnScrnNum OCTET STRING

WfFrSwSigEntry  
SEQUENCE    
  wfFrSwSigDelete INTEGER
  wfFrSwSigCircuit INTEGER
  wfFrSwSigSvcDlciLow INTEGER
  wfFrSwSigSvcDlciHigh INTEGER
  wfFrSwSigDlciAssign INTEGER
  wfFrSwSigMaxNumOfSvcs INTEGER
  wfFrSwSigNumOfSvcsInUse INTEGER
  wfFrSwSigDefaultThroughput INTEGER
  wfFrSwSigDefaultMinAcceptThroughput INTEGER
  wfFrSwSigDefaultBc INTEGER
  wfFrSwSigDefaultBe INTEGER
  wfFrSwSigMaxInThroughputPerSvc INTEGER
  wfFrSwSigMaxOutThroughputPerSvc INTEGER
  wfFrSwSigTotalInNegotiableThroughput INTEGER
  wfFrSwSigTotalInCurrentThroughput INTEGER
  wfFrSwSigTotalOutNegotiableThroughput INTEGER
  wfFrSwSigTotalOutCurrentThroughput INTEGER
  wfFrSwSigXNetClearingDisable INTEGER
  wfFrSwSigCallingPartyIEMandatory INTEGER
  wfFrSwSigT301 INTEGER
  wfFrSwSigT303 INTEGER
  wfFrSwSigT305 INTEGER
  wfFrSwSigT308 INTEGER
  wfFrSwSigT310 INTEGER
  wfFrSwSigT322 INTEGER
  wfFrSwSigInSetupPkts Counter
  wfFrSwSigInCallProceedingPkts Counter
  wfFrSwSigInConnectPkts Counter
  wfFrSwSigInDisconnectPkts Counter
  wfFrSwSigInReleasePkts Counter
  wfFrSwSigInReleaseCompletePkts Counter
  wfFrSwSigInStatusEnquiryPkts Counter
  wfFrSwSigInStatusPkts Counter
  wfFrSwSigInUnknownPkts Counter
  wfFrSwSigOutSetupPkts Counter
  wfFrSwSigOutCallProceedingPkts Counter
  wfFrSwSigOutConnectPkts Counter
  wfFrSwSigOutDisconnectPkts Counter
  wfFrSwSigOutReleasePkts Counter
  wfFrSwSigOutReleaseCompletePkts Counter
  wfFrSwSigOutStatusEnquiryPkts Counter
  wfFrSwSigOutStatusPkts Counter
  wfFrSwSigRejectedConnRequests Counter
  wfFrSwSigNwrkAbortedConnections Counter
  wfFrSwSigL2Resets Counter
  wfFrSwSigDlciIEAllowed INTEGER
  wfFrSwSigX213PriorityIEAllowed INTEGER
  wfFrSwSigMaximumBe INTEGER

WfFrSwGlobalE164AddrEntry  
SEQUENCE    
  wfFrSwGlobalE164AddrDelete INTEGER
  wfFrSwGlobalE164AddrLow OCTET STRING
  wfFrSwGlobalE164AddrHigh OCTET STRING
  wfFrSwGlobalE164AddrIPAddr IpAddress

WfFrSwGlobalX121AddrEntry  
SEQUENCE    
  wfFrSwGlobalX121AddrDelete INTEGER
  wfFrSwGlobalX121AddrLow OCTET STRING
  wfFrSwGlobalX121AddrHigh OCTET STRING
  wfFrSwGlobalX121AddrIPAddr IpAddress

WfFrSwLocalE164AddrEntry  
SEQUENCE    
  wfFrSwLocalE164AddrDelete INTEGER
  wfFrSwLocalE164AddrCct INTEGER
  wfFrSwLocalE164Address OCTET STRING
  wfFrSwLocalE164AddrCUG OCTET STRING
  wfFrSwLocalE164AddrLocalFlag INTEGER

WfFrSwLocalX121AddrEntry  
SEQUENCE    
  wfFrSwLocalX121AddrDelete INTEGER
  wfFrSwLocalX121AddrCct INTEGER
  wfFrSwLocalX121Address OCTET STRING
  wfFrSwLocalX121AddrCUG OCTET STRING
  wfFrSwLocalX121AddrLocalFlag INTEGER

WfFrSwCngcMonEntry  
SEQUENCE    
  wfFrSwCngcMonReset INTEGER
  wfFrSwCngcMonCct INTEGER
  wfFrSwCngcMonP0Level1Percent Gauge
  wfFrSwCngcMonP0Level2Percent Gauge
  wfFrSwCngcMonP0Level3Percent Gauge
  wfFrSwCngcMonP0Level4Percent Gauge
  wfFrSwCngcMonP1Level1Percent Gauge
  wfFrSwCngcMonP1Level2Percent Gauge
  wfFrSwCngcMonP1Level3Percent Gauge
  wfFrSwCngcMonP1Level4Percent Gauge
  wfFrSwCngcMonP2Level1Percent Gauge
  wfFrSwCngcMonP2Level2Percent Gauge
  wfFrSwCngcMonP2Level3Percent Gauge
  wfFrSwCngcMonP2Level4Percent Gauge
  wfFrSwCngcMonP3Level1Percent Gauge
  wfFrSwCngcMonP3Level2Percent Gauge
  wfFrSwCngcMonP3Level3Percent Gauge
  wfFrSwCngcMonP3Level4Percent Gauge

WfFrSwVirtualIntfEntry  
SEQUENCE    
  wfFrSwVirtualIntfDelete INTEGER
  wfFrSwVirtualIntfSlot INTEGER
  wfFrSwVirtualIntfCct INTEGER
  wfFrSwVirtualIntfLineNum INTEGER

WfFrSwExtFileSysEntry  
SEQUENCE    
  wfFrSwExtFileSysDelete INTEGER
  wfFrSwExtFileSysSlot INTEGER
  wfFrSwExtFileSysSize INTEGER
  wfFrSwExtFileSysActualSize INTEGER
  wfFrSwExtFileSysState INTEGER

Defined Values

wfFrSwDlcmiTable 1.3.6.1.4.1.18.3.5.9.6.1
The Parameters for the Data Link Connection Management Interface corresponding to any interface. Incorporates the Error table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfFrSwDlcmiEntry

wfFrSwDlcmiEntry 1.3.6.1.4.1.18.3.5.9.6.1.1
The parameters for a particular Data Link Connection Management Interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfFrSwDlcmiEntry  

wfFrSwDlcmiDelete 1.3.6.1.4.1.18.3.5.9.6.1.1.1
Indication to delete this frame relay interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfFrSwDlcmiState 1.3.6.1.4.1.18.3.5.9.6.1.1.2
Indicates which state of DLCMI the interface is in
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), init(3)  

wfFrSwDlcmiNniEnable 1.3.6.1.4.1.18.3.5.9.6.1.1.3
Indicates whether a NNI is enabled for this entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfFrSwDlcmiCircuit 1.3.6.1.4.1.18.3.5.9.6.1.1.4
Instance identifier; the circuit number of this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwDlcmiManagementType 1.3.6.1.4.1.18.3.5.9.6.1.1.5
Indicates the Data Link Connection Management scheme that is active.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), lmi(2), t1617d(3), t1617b(4), annexa(5), lmiswitch(6), annexdswitch(7), annexaswitch(8), iwfoamenabled(9), iwfoamdisabled(10)  

wfFrSwL3NetAddress 1.3.6.1.4.1.18.3.5.9.6.1.1.6
Indicates level 3 (IP) address of this frame relay interface
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

wfFrSwDlcmiAddressLen 1.3.6.1.4.1.18.3.5.9.6.1.1.7
Indicates the address length, including the control portion.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER twobyte(2), threebyte(3), fourbyte(4)  

wfFrSwDlcmiControlByteDisable 1.3.6.1.4.1.18.3.5.9.6.1.1.8
Indicates inclusion of control byte in q922 format.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfFrSwDlcmiPollingInterval 1.3.6.1.4.1.18.3.5.9.6.1.1.9
The number of seconds between successive status enquiry messages.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..30  

wfFrSwDlcmiFullEnquiryInterval 1.3.6.1.4.1.18.3.5.9.6.1.1.10
Indicates the number of status enquiries before a full status enquiry. (For bidirectional procedures.)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

wfFrSwDlcmiErrorThreshold 1.3.6.1.4.1.18.3.5.9.6.1.1.11
Indicates the number errors monitored before declaring the interface down.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrSwDlcmiMonitoredEvents 1.3.6.1.4.1.18.3.5.9.6.1.1.12
Indicates the events over which error threshold is kept.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrSwDlcmiRecoveryCounts 1.3.6.1.4.1.18.3.5.9.6.1.1.13
Indicates the number of correct polling cycles during recovery.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwDlcmiMaxSupportedVCs 1.3.6.1.4.1.18.3.5.9.6.1.1.14
Indicates the maximum number of VCs allowed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..1024  

wfFrSwDlcmiVCsInUse 1.3.6.1.4.1.18.3.5.9.6.1.1.15
Indicates the number of VCs that are currently configured on this interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwSwitchHdrErrors 1.3.6.1.4.1.18.3.5.9.6.1.1.16
Indicates the number of frames dropped because they were received on the remote side with an invalid switch header.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwDlcmiSequenceCount 1.3.6.1.4.1.18.3.5.9.6.1.1.17
Indicates this switch's sequence counter; value of next to send.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

wfFrSwDlcmiLastReceived 1.3.6.1.4.1.18.3.5.9.6.1.1.18
Indicates the sequence number just received from the end station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

wfFrSwDlcmiActiveSeqCount 1.3.6.1.4.1.18.3.5.9.6.1.1.19
Indicates the switch's sequence counter for sending status enquiry. (For bidirectional procedures.)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

wfFrSwDlcmiActiveReceived 1.3.6.1.4.1.18.3.5.9.6.1.1.20
Indicates the sequence number just received from the enquiring station. (For bidirectional procedures.)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

wfFrSwDlcmiPolls 1.3.6.1.4.1.18.3.5.9.6.1.1.21
This is the counter of where we are in the polling cycle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwDlcmiAlarmTimer 1.3.6.1.4.1.18.3.5.9.6.1.1.22
Counter of 1/2 second timeouts. Indicates when to expect poll.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwErrType 1.3.6.1.4.1.18.3.5.9.6.1.1.23
Indicates the type of the last specific monitored error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER reset(1), other(2), short(3), long(4), illegaldlci(5), unknowndlci(6), protoerr(7), unknownie(8), sequenceerr(9), unknownrpt(10), byteerr(11), hdrerr(12), formaterr(13)  

wfFrSwErrData 1.3.6.1.4.1.18.3.5.9.6.1.1.24
Contains as much of the error packet as possible.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wfFrSwErrTime 1.3.6.1.4.1.18.3.5.9.6.1.1.25
Indicates the time the last error occurred.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

wfFrSwBcMeasurementInterval 1.3.6.1.4.1.18.3.5.9.6.1.1.26
Indicates the Committed Burst sample window interval in msec
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 100..2000  

wfFrSwDlcmiMcastNoBufferErrors 1.3.6.1.4.1.18.3.5.9.6.1.1.27
Indicates the number of times a multicast failed partially or wholly because there are insufficient buffers available to create multiple copies of a multicast frame
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwDlcmiFrameTooShortErrors 1.3.6.1.4.1.18.3.5.9.6.1.1.28
Indicates the number of frames dropped that are too short to be accepted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwDlcmiFrameTooLongErrors 1.3.6.1.4.1.18.3.5.9.6.1.1.29
Indicates the number of frames dropped that are too long to be accepted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwDlcmiIllegalDlciErrors 1.3.6.1.4.1.18.3.5.9.6.1.1.30
Indicates the number of frames dropped that had an invalid DLCI value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwDlcmiUnknownDlciErrors 1.3.6.1.4.1.18.3.5.9.6.1.1.31
Indicates the number of frames dropped which had an unknown DLCI value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwDlcmiProtocolErrors 1.3.6.1.4.1.18.3.5.9.6.1.1.32
Indicates the number of frames dropped because of a DLCMI protocol violation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwDlcmiUnknownIEErrors 1.3.6.1.4.1.18.3.5.9.6.1.1.33
Indicates the number of frames dropped that had an unknown information element.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwDlcmiSequenceErrors 1.3.6.1.4.1.18.3.5.9.6.1.1.34
Indicates the number of frames dropped because of a DLCMI sequence error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwDlcmiUnknownRPTErrors 1.3.6.1.4.1.18.3.5.9.6.1.1.35
Indicates the number of frames dropped which had an unknown report type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwDlcmiControlByteErrors 1.3.6.1.4.1.18.3.5.9.6.1.1.36
Indicates the number of frames dropped that had an unsupported control byte.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwDlcmiFormatErrors 1.3.6.1.4.1.18.3.5.9.6.1.1.37
Indicates the number of frames dropped due to a frame format error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwDlcmiOtherErrors 1.3.6.1.4.1.18.3.5.9.6.1.1.38
Indicates the number of frames dropped due to unknown or other errors not counted by any error counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwDlcmiStatus 1.3.6.1.4.1.18.3.5.9.6.1.1.39
Indicates which state of execution the DLCMI gate is in
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER running(1), recovered(2), fault(3), start(4)  

wfFrSwDlcmiNewVCs 1.3.6.1.4.1.18.3.5.9.6.1.1.40
Indicates the number of newly added PVCs that we have not yet told the CPE about, by means of a full-status message.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwDlcmiDeletedVCs 1.3.6.1.4.1.18.3.5.9.6.1.1.41
Indicates the number of deletedly added PVCs that we have not yet told the CPE about, by means of a full-status message.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwDlcmiFullStatusSeq 1.3.6.1.4.1.18.3.5.9.6.1.1.42
Indicates the expected sequence number for the next Status Enquiry message that will prove that the CPE received our last Full Status Message and knows about the deleted PVCs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwDlcmiBidirect 1.3.6.1.4.1.18.3.5.9.6.1.1.43
Indication to delete this frame relay interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wfFrSwDlcmiDteStatus 1.3.6.1.4.1.18.3.5.9.6.1.1.44
Indicates which state of execution the DLCMI gate is in for bidirectional procedures.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER running(1), recovered(2), fault(3), start(4)  

wfFrSwDlcmiDteSeqCount 1.3.6.1.4.1.18.3.5.9.6.1.1.45
Indicates the switch's sequence counter for sending status enquiry. (For bidirectional procedures.)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

wfFrSwDlcmiDteReceived 1.3.6.1.4.1.18.3.5.9.6.1.1.46
Indicates the sequence number just received from the enquiring station. (For bidirectional procedures.)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

wfFrSwDlcmiDteLastReceived 1.3.6.1.4.1.18.3.5.9.6.1.1.47
Indicates the sequence number just received from the end station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

wfFrSwDlcmiDtePolls 1.3.6.1.4.1.18.3.5.9.6.1.1.48
This is the counter of where we are in the polling cycle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwDlcmiDtePollingInterval 1.3.6.1.4.1.18.3.5.9.6.1.1.49
The number of seconds between successive status enquiry messages.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..30  

wfFrSwDlcmiDteFullEnquiryInterval 1.3.6.1.4.1.18.3.5.9.6.1.1.50
Indicates the number of status enquiries before a full status enquiry. (For bidirectional procedures.)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

wfFrSwDlcmiDteErrorThreshold 1.3.6.1.4.1.18.3.5.9.6.1.1.51
Indicates the number errors monitored before declaring the interface down.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrSwDlcmiCrossNetEnable 1.3.6.1.4.1.18.3.5.9.6.1.1.52
Indication to delete this frame relay interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wfFrSwDlcmiCrossNetPollingInterval 1.3.6.1.4.1.18.3.5.9.6.1.1.53
The number of seconds between successive status enquiry messages.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..86400  

wfFrSwDlcmiCrossNetErrorThreshold 1.3.6.1.4.1.18.3.5.9.6.1.1.54
Indicates the number missed heartbeat polls before declaring the cross-net PVC inactive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrSwDlcmiCrossNetAsyncUpdateEnable 1.3.6.1.4.1.18.3.5.9.6.1.1.55
Indicates whether we are to send to the other end of the network, status updates for dlcis as soon as there is a change of status for the dlci.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfFrSwDlcmiBcMeasurementEnable 1.3.6.1.4.1.18.3.5.9.6.1.1.56
Indicates whether Committed Burst Measurement is enabled for this interface. If this attribute is set to DISABLE then DE bit setting in Frame Relay frames at this interface is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wfFrSwDlcmiAsyncUpdateEnable 1.3.6.1.4.1.18.3.5.9.6.1.1.57
Indicates whether the link management entity should send an asynchronous single PVC update message when the state of a PVC is changed by a technician or by cross-net polling procedures.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfFrSwDlcmiCrossNetListenEnable 1.3.6.1.4.1.18.3.5.9.6.1.1.58
Indicates whether the link management entity should make a judgement of the PVC's status based on Cross Net updates.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfFrSwDlcmiSvcDisable 1.3.6.1.4.1.18.3.5.9.6.1.1.59
Indicates whether SVC is enabled or disabled for this access channel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfFrSwDlcmiL2AddrType 1.3.6.1.4.1.18.3.5.9.6.1.1.60
Indicates the address type supported on this access channel. This information is needed when wFrSwDlcmiSVCDisable is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER e164(1), x121(2)  

wfFrSwDlcmiEscapeMode 1.3.6.1.4.1.18.3.5.9.6.1.1.61
Identifies the Escape mode (none, ingress or egress) to be used for PVCs with wfFrSwVcEscapeMode set to enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), ingress(2), egress(3)  

wfFrSwDlcmiEscapeCircuit 1.3.6.1.4.1.18.3.5.9.6.1.1.62
Identifies the FR-DTE circuit number corresponding to an Escape PVC. Applies only to PVCs with wfFrSwVcEscapeEnable set to enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrSwDlcmiEscapeVcCount 1.3.6.1.4.1.18.3.5.9.6.1.1.63
The number of PVCs on this DLCMI that are configured as Escape VCs
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrSwDlcmiIwfMode 1.3.6.1.4.1.18.3.5.9.6.1.1.64
Identifies the interworking mode (none, SDLC-to-FRSW) to be used for PVCs with wfFrSwVcEscapeMode set to enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), sdlc2frsw(2)  

wfFrSwDlcmiSvcBillingEnable 1.3.6.1.4.1.18.3.5.9.6.1.1.65
Indicates whether the SVC Billing on this access channel set to enable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfFrSwDlcmiSpvcAgent 1.3.6.1.4.1.18.3.5.9.6.1.1.66
Indicates if an SPVC Call Request Agent, Call Accept Agent, or both are enabled on this FRSW circuit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), cra(2), caa(3), craandcaa(4)  

wfFrSwDlcmiCallAccDlciSelectionType 1.3.6.1.4.1.18.3.5.9.6.1.1.67
Indicates to the Call Accept Agent to accept SPVC Call Setup requests for any available DLCI or for a specific DLCI. Call Setup requests with the wrong selection type will be rejected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER any(1), specific(2)  

wfFrSwCctTable 1.3.6.1.4.1.18.3.5.9.6.2
Frame Relay Circuit table gives information about a virtual circuit.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfFrSwCctEntry

wfFrSwCctEntry 1.3.6.1.4.1.18.3.5.9.6.2.1
An entry in the Frame Relay (Virtual) Circuit table.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  WfFrSwCctEntry  

wfFrSwCctDelete 1.3.6.1.4.1.18.3.5.9.6.2.1.1
Indication to delete this frame relay interface.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2), system(3)  

wfFrSwCctNumber 1.3.6.1.4.1.18.3.5.9.6.2.1.2
Instance identifier; the circuit number of this interface.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwCctDlci 1.3.6.1.4.1.18.3.5.9.6.2.1.3
Instance identifier; this indicates the virtual circuit identifier
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER twobyteminimum(16), twobytemaximum(1007), threebyteminimum(1024), threebytemaximum(64511), fourbyteminimum(131072), fourbytemaximum(8257535)  

wfFrSwCctState 1.3.6.1.4.1.18.3.5.9.6.2.1.4
Indicates whether the particular virtual circuit is operational.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER invalid(1), active(2), inactive(3), control(4), user(5)  

wfFrSwCctMulticast 1.3.6.1.4.1.18.3.5.9.6.2.1.5
Indicates whether this dlci is used for multicast or single destination.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER multicast(1), unicast(2)  

wfFrSwCctInBc 1.3.6.1.4.1.18.3.5.9.6.2.1.6
Indicates the Incoming Committed Burst bits for this virtual circuit.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwCctOutBc 1.3.6.1.4.1.18.3.5.9.6.2.1.7
Indicates the Outgoing Committed Burst bits for this virtual circuit.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwCctInBe 1.3.6.1.4.1.18.3.5.9.6.2.1.8
Indicates the Incoming Excess Burst bits for this virtual circuit.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrSwCctOutBe 1.3.6.1.4.1.18.3.5.9.6.2.1.9
Indicates the Outgoing Excess Burst bits for this virtual circuit.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrSwCctInThroughput 1.3.6.1.4.1.18.3.5.9.6.2.1.10
Indicates the incoming throughput in bits/sec for this virtual circuit.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrSwCctOutThroughput 1.3.6.1.4.1.18.3.5.9.6.2.1.11
Indicates the outgoing throughput in bits/sec for this virtual circuit.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrSwCctCreationTime 1.3.6.1.4.1.18.3.5.9.6.2.1.12
Indicates the value of sysUpTime when the VC was created.
Status: obsolete Access: read-only
OBJECT-TYPE    
  TimeTicks  

wfFrSwCctLastTimeChange 1.3.6.1.4.1.18.3.5.9.6.2.1.13
Indicates the value of sysUpTime when last there was a change in VC state.
Status: obsolete Access: read-only
OBJECT-TYPE    
  TimeTicks  

wfFrSwCctLocalSentNonDEFrames 1.3.6.1.4.1.18.3.5.9.6.2.1.14
Indicates the number of frames without the DE bit sent on this virtual circuit over the local interface.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwCctLocalSentNonDEOctets 1.3.6.1.4.1.18.3.5.9.6.2.1.15
Indicates the number of octets without DE bit sent on this virtual circuit over the local interface.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwCctLocalSentDEFrames 1.3.6.1.4.1.18.3.5.9.6.2.1.16
Indicates the number of frames with DE bit set sent on this virtual circuit over the local interface.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwCctLocalSentDEOctets 1.3.6.1.4.1.18.3.5.9.6.2.1.17
Indicates the number of octets with DE bit set sent on this virtual circuit over the local interface.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwCctLocalSetFECNFrames 1.3.6.1.4.1.18.3.5.9.6.2.1.18
Indicates the number of frames sent to the local interface on which this switch set the FECN bit .
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwCctLocalSetFECNOctets 1.3.6.1.4.1.18.3.5.9.6.2.1.19
Indicates the number of octets in frames sent to the local interface on which this switch set the FECN bit.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwCctLocalSetBECNFrames 1.3.6.1.4.1.18.3.5.9.6.2.1.20
Indicates the number of frames sent to the local interface on which this switch set the BECN bit.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwCctLocalSetBECNOctets 1.3.6.1.4.1.18.3.5.9.6.2.1.21
Indicates the number of octets in frames sent to the local interface on which this switch set the BECN bit.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwCctLocalSetDEFrames 1.3.6.1.4.1.18.3.5.9.6.2.1.22
Indicates the number of frames sent to the local interface on which this switch set the DE bit.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwCctLocalSetDEOctets 1.3.6.1.4.1.18.3.5.9.6.2.1.23
Indicates the number of octets in frames sent to the local interface on which this switch set the DE bit.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwCctLocalDropNonDEFrames 1.3.6.1.4.1.18.3.5.9.6.2.1.24
Indicates the number of frames received over the local interface which were discarded, excluding any frames with the DE bit set.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwCctLocalDropNonDEOctets 1.3.6.1.4.1.18.3.5.9.6.2.1.25
Indicates the number of octets in frames received over the local interface which were discarded, excluding any frames with the DE bit set.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwCctLocalDropDEFrames 1.3.6.1.4.1.18.3.5.9.6.2.1.26
Indicates the number of frames received over the local interface, having the DE bit set, which were discarded.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwCctLocalDropDEOctets 1.3.6.1.4.1.18.3.5.9.6.2.1.27
Indicates the number of octets in frames received over the local interface, having the DE bit set, which were discarded.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwCctInactiveVCDropFrames 1.3.6.1.4.1.18.3.5.9.6.2.1.28
Indicates how many frames were discarded because the virtual circuit was inactive.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwCctInactiveVCDropOctets 1.3.6.1.4.1.18.3.5.9.6.2.1.29
Indicates how many Octets were discarded because the virtual circuit was inactive.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwCctLocalRecvNonDEFrames 1.3.6.1.4.1.18.3.5.9.6.2.1.30
Indicates the number of frames received on this virtual circuit over the local interface.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwCctLocalRecvNonDEOctets 1.3.6.1.4.1.18.3.5.9.6.2.1.31
Indicates the number of octets received on this virtual circuit over the local interface.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwCctLocalRecvDEFrames 1.3.6.1.4.1.18.3.5.9.6.2.1.32
Indicates the number of frames received over the local interface with the DE bit set.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwCctLocalRecvDEOctets 1.3.6.1.4.1.18.3.5.9.6.2.1.33
Indicates the number of octets in frames received over the local interface with the DE bit set.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwCctLocalRecvFECNFrames 1.3.6.1.4.1.18.3.5.9.6.2.1.34
Indicates the number of frames received over the local interface with the FECN bit set.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwCctLocalRecvFECNOctets 1.3.6.1.4.1.18.3.5.9.6.2.1.35
Indicates the number of octets in frames received over the local interface with the FECN bit set.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwCctLocalRecvBECNFrames 1.3.6.1.4.1.18.3.5.9.6.2.1.36
Indicates the number of frames received over the local interface with the BECN bit set.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwCctLocalRecvBECNOctets 1.3.6.1.4.1.18.3.5.9.6.2.1.37
Indicates the number of octets in frames received over the local interface with the BECN bit set.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwCctLocalRecentNonDEOctets 1.3.6.1.4.1.18.3.5.9.6.2.1.38
Indicates the number of octets received over the local interface during the most recent sampling period.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwCctRemoteSentNonDEFrames 1.3.6.1.4.1.18.3.5.9.6.2.1.39
Indicates the number of Non DE set frames sent over the remote interface.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwCctRemoteSentNonDEOctets 1.3.6.1.4.1.18.3.5.9.6.2.1.40
Indicates the number of Non DE set octets sent over the remote interface.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwCctRemoteSentDEFrames 1.3.6.1.4.1.18.3.5.9.6.2.1.41
Indicates the number of DE set frames sent over the remote interface.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwCctRemoteSentDEOctets 1.3.6.1.4.1.18.3.5.9.6.2.1.42
Indicates the number of DE set octets sent over the remote interface.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwCctRemoteSetFECNFrames 1.3.6.1.4.1.18.3.5.9.6.2.1.43
Indicates the number of frames sent to the remote interface on which this switch set the FECN bit.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwCctRemoteSetFECNOctets 1.3.6.1.4.1.18.3.5.9.6.2.1.44
Indicates the number of octets in frames sent to the remote interface that on which this switch set the FECN bit.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwCctRemoteSetBECNFrames 1.3.6.1.4.1.18.3.5.9.6.2.1.45
Indicates the number of frames sent to the remote interface on which this switch set the BECN bit.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwCctRemoteSetBECNOctets 1.3.6.1.4.1.18.3.5.9.6.2.1.46
Indicates the number of octets in frames sent to the remote interface on which this switch set the BECN bit.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwCctRemoteDropNonDEFrames 1.3.6.1.4.1.18.3.5.9.6.2.1.47
Indicates the number of frames received over the remote interface which were discarded, excluding any frames with the DE bit set.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwCctRemoteDropNonDEOctets 1.3.6.1.4.1.18.3.5.9.6.2.1.48
Indicates the number of octets in frames received over the remote interface which were discarded, excluding any frames with the DE bit set.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwCctRemoteDropDEFrames 1.3.6.1.4.1.18.3.5.9.6.2.1.49
Indicates the number of frames received over the remote interface, having the DE bit set, which were discarded.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwCctRemoteDropDEOctets 1.3.6.1.4.1.18.3.5.9.6.2.1.50
Indicates the number of octets in frames received over the remote interface, having the DE bit set, which were discarded.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwCctRemoteRecvNonDEFrames 1.3.6.1.4.1.18.3.5.9.6.2.1.51
Indicates the number of frames received on this virtual circuit over the remote interface.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwCctRemoteRecvNonDEOctets 1.3.6.1.4.1.18.3.5.9.6.2.1.52
Indicates the number of octets received on this virtual circuit over the remote interface.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwCctRemoteRecvDEFrames 1.3.6.1.4.1.18.3.5.9.6.2.1.53
Indicates the number of frames received over the remote interface with the DE bit set.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwCctRemoteRecvDEOctets 1.3.6.1.4.1.18.3.5.9.6.2.1.54
Indicates the number of octets in frames received over the remote interface with the DE bit set.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwCctRemoteRecvFECNFrames 1.3.6.1.4.1.18.3.5.9.6.2.1.55
Indicates the number of frames received over the remote interface with the FECN bit set.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwCctRemoteRecvFECNOctets 1.3.6.1.4.1.18.3.5.9.6.2.1.56
Indicates the number of octets in frames received over the remote interface with the FECN bit set.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwCctRemoteRecvBECNFrames 1.3.6.1.4.1.18.3.5.9.6.2.1.57
Indicates the number of frames received over the remote interface with the BECN bit set.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwCctRemoteRecvBECNOctets 1.3.6.1.4.1.18.3.5.9.6.2.1.58
Indicates the number of octets in frames received over the remote interface with the BECN bit set.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwCctLocalBecnState 1.3.6.1.4.1.18.3.5.9.6.2.1.59
Indicates the local BECN state
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwCctRemoteBecnState 1.3.6.1.4.1.18.3.5.9.6.2.1.60
Indicates the remote BECN state
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwCctLocalOrRemoteConnection 1.3.6.1.4.1.18.3.5.9.6.2.1.61
Indicates whether this connection is Local to Local Connection or Local to Remote connection.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER local(1), remote(2)  

wfFrSwCctInBcOctets 1.3.6.1.4.1.18.3.5.9.6.2.1.62
Indicates the Incoming Committed Burst in octets for this virtual circuit.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwCctStateSet 1.3.6.1.4.1.18.3.5.9.6.2.1.63
User access for setting the state of a virtual circuit
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER inactive(1), active(2)  

wfFrSwCctReportedStatus 1.3.6.1.4.1.18.3.5.9.6.2.1.64
Record keeping for circuit status
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER acked(1), unacked(2), unreported(3)  

wfFrSwCctReceivedStatus 1.3.6.1.4.1.18.3.5.9.6.2.1.65
State of a virtual circuit as reported by the network at an NNI
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), active(2)  

wfFrSwCctCrossNetStatus 1.3.6.1.4.1.18.3.5.9.6.2.1.66
State of a virtual circuit as reported by the other end of the network under bidirectional signalling.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), active(2)  

wfFrSwCctXNetSent 1.3.6.1.4.1.18.3.5.9.6.2.1.67
Whether we have sent a cross net status message for this VC yet.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER unsent(1), sent(2)  

wfFrSwCctXNetReceived 1.3.6.1.4.1.18.3.5.9.6.2.1.68
Whether we have received a cross net status message for this VC during the current polling interval.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER recv(1), unrecv(2)  

wfFrSwCctXNetErrors 1.3.6.1.4.1.18.3.5.9.6.2.1.69
This is the count of the consecutive errors (usually timeouts) against this VC in cross-network heartbeat polling
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwTupleTable 1.3.6.1.4.1.18.3.5.9.6.3
The Parameters for the Tuple table, identifying the endpoints of virtual circuits as pairs of IP addresses and DLCI.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfFrSwTupleEntry

wfFrSwTupleEntry 1.3.6.1.4.1.18.3.5.9.6.3.1
The parameters for a particular Tuple.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  WfFrSwTupleEntry  

wfFrSwTupleDelete 1.3.6.1.4.1.18.3.5.9.6.3.1.1
Indication to delete this tuple.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfFrSwTupleIpAddrA 1.3.6.1.4.1.18.3.5.9.6.3.1.2
Instance indentifier; indicates the IP address associated with endpoint 'A' of a virtual circuit.
Status: obsolete Access: read-only
OBJECT-TYPE    
  IpAddress  

wfFrSwTupleDlciA 1.3.6.1.4.1.18.3.5.9.6.3.1.3
Instance identfier; indicates the DLCI associated with endpoint 'A' of a virtual circuit.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwTupleIpAddrB 1.3.6.1.4.1.18.3.5.9.6.3.1.4
Instance identfier; indicates the IP address associated with endpoint 'B' of a virtual circuit.
Status: obsolete Access: read-only
OBJECT-TYPE    
  IpAddress  

wfFrSwTupleDlciB 1.3.6.1.4.1.18.3.5.9.6.3.1.5
Instance identifier; Indicates the DLCI associated with endpoint 'B' of a virtual circuit.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwMcastTable 1.3.6.1.4.1.18.3.5.9.6.4
The list of multicast addresses
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfFrSwMcastEntry

wfFrSwMcastEntry 1.3.6.1.4.1.18.3.5.9.6.4.1
The parameters for a particular Multicast address.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfFrSwMcastEntry  

wfFrSwMcastDelete 1.3.6.1.4.1.18.3.5.9.6.4.1.1
Indication to delete this multicast instance.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfFrSwMcastIndex 1.3.6.1.4.1.18.3.5.9.6.4.1.2
Index of this multicast DLCI instance
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwMcastIpAddr 1.3.6.1.4.1.18.3.5.9.6.4.1.3
IP address of the interface in which this multicast DLCI is defined.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

wfFrSwMcastDlci 1.3.6.1.4.1.18.3.5.9.6.4.1.4
Identifies the multicast DLCI with which the IndividualDlci is associated.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrSwMcastIndividualDlci 1.3.6.1.4.1.18.3.5.9.6.4.1.5
Indicates the DLCI associated with the above multicast DLCI.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrSwUsage 1.3.6.1.4.1.18.3.5.9.6.5
OBJECT IDENTIFIER    

wfFrSwUsageEnable 1.3.6.1.4.1.18.3.5.9.6.5.1
Enable/Disable FRSW billing.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfFrSwUsageVolume 1.3.6.1.4.1.18.3.5.9.6.5.2
Indicates the file system volume number to which the billing usage data files will be written. The volume number corresponds to the slot number on which the volume resides. Note: Value 0 has the special meaning that no 'Store' and 'Flush' operations will take place. This translates to no Billing data will be written to the local file system. 'Update' operations will still be performed on each local slot. Full Billing statistics will still be available in the wfFrSwUsageTable MIB.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..14  

wfFrSwUsageVolumeBackup 1.3.6.1.4.1.18.3.5.9.6.5.3
Indicates the backup volume if wfFrSwUsageVolume becomes inoperative. Note: This feature is not implemented in this release.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..14  

wfFrSwUsageDirectory 1.3.6.1.4.1.18.3.5.9.6.5.4
The name of the directory where the billing usage data files are stored.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wfFrSwUsageFilePrefix 1.3.6.1.4.1.18.3.5.9.6.5.5
The base name of billing usage data files.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wfFrSwUsageTimerInterval 1.3.6.1.4.1.18.3.5.9.6.5.6
This number determines the timer interval (number of seconds) unit for the Billing process to perform its various timer driven tasks. i.e. updating billing usage data, writing billing usage data to file system and file system management activities.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..60  

wfFrSwUsageUpdateInterval 1.3.6.1.4.1.18.3.5.9.6.5.7
This number specifies the interval (number of minutes) for the Billing process to collect and update billing usage data in the wfFrSwUsage MIB. Note: When converted to seconds, this must be a multiple of wfFrSwUsageTimerInterval.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..2147483647  

wfFrSwUsageStoreInterval 1.3.6.1.4.1.18.3.5.9.6.5.8
This number specifies the interval (number of minutes) for the Billing process to write billing usage data on to the file system from the wfFrSwUsage MIB. Note: When converted to seconds, this must be a multiple of wfFrSwUsageTimerInterval.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..2147483647  

wfFrSwUsageFlushInterval 1.3.6.1.4.1.18.3.5.9.6.5.9
This number specifies the interval (number of minutes) for the Billing process to write billing usage data on to the file system from the wfFrSwUsage MIB follow by zeroing the wfFrSwUsage MIB. Note: When converted to seconds, this must be a multiple of wfFrSwUsageTimerInterval.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..2147483647  

wfFrSwUsageCleanupInterval 1.3.6.1.4.1.18.3.5.9.6.5.10
This is the interval (number of minutes) for the Billing process to check and delete old billing usage data files. Note: When converted to seconds, this must be a multilple of wfFrSwUsageTimerInterval.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..2147483647  

wfFrSwUsageLocalTimeZone 1.3.6.1.4.1.18.3.5.9.6.5.11
Indicates local time zone of the switch
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwUsageUpdateTimeStamp 1.3.6.1.4.1.18.3.5.9.6.5.12
Time stamp of last wfFrSwUsageUpdateInterval timer expiration or the starting time of the current wfFrSwUsageUpdateInterval. This value is number of seconds since midnight Jan 1, 1976 (GMT).
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

wfFrSwUsageStoreTimeStamp 1.3.6.1.4.1.18.3.5.9.6.5.13
Time stamp of last wfFrSwUsageStoreInterval timer expiration or the starting time of the current wfFrSwUsageStoreInterval. This value is number of seconds since midnight Jan. 1, 1976 (GMT).
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

wfFrSwUsageFlushTimeStamp 1.3.6.1.4.1.18.3.5.9.6.5.14
Time stamp of last wfFrSwUsageFlushInterval timer expiration or the starting time of the current wfFrSwUsageFlushInterval. This value is number of seconds since midnight Jan. 1, 1976 (GMT).
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

wfFrSwUsageCleanupTimeStamp 1.3.6.1.4.1.18.3.5.9.6.5.15
Time stamp of last wfFrSwUsageCleanupInterval timer expiration or the starting time of the current wfFrSwUsageCleanupInterval. This value is number of seconds since midnight Jan. 1, 1976 (GMT).
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

wfFrSwUsageUpdateData 1.3.6.1.4.1.18.3.5.9.6.5.16
Setting this attribute to a non-zero value will cause an immediate updating of the billing usage data. Once activated, this attribute should be reset to zero to allow subsequent activations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrSwUsageStoreData 1.3.6.1.4.1.18.3.5.9.6.5.17
Setting this attribute to a non-zero value will cause an immediate updating and writing of the billing usage data. Once activated, this attribute should be reset to zero to allow subsequent activations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrSwUsageFlushData 1.3.6.1.4.1.18.3.5.9.6.5.18
Setting this attribute to a non-zero value will cause an immediate updating and writing of the billing usage data and followed by zeroing the wfFrSwBillingUsage MIB. Once activated, this attribute should be reset to zero to allow subsequent activations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrSwUsageFileCleanup 1.3.6.1.4.1.18.3.5.9.6.5.19
Setting this attribute to a non-zero value will cause an immediate checking and deleting old billing usage data files. Once activated, this attribute should be reset to zero to allow subsequent activations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrSwUsageState 1.3.6.1.4.1.18.3.5.9.6.5.20
current state FRSW billing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), init(3), notpresent(4)  

wfFrSwUsageCurVolume 1.3.6.1.4.1.18.3.5.9.6.5.21
current file system volume number used. This number is the same as wfFrSwUsageVolume except when the user sets wfFrSwUsageVolume to an invalid number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..14  

wfFrSwUsageCurVolumeBackup 1.3.6.1.4.1.18.3.5.9.6.5.22
curent backup file system volume number used. This number is the same as wfFrSwUsageVolumeBackUp except when the user sets wfFrSwUsageVolume to an invalid number. Note: This feature is not implemented in this release.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..14  

wfFrSwUsageCurDirectory 1.3.6.1.4.1.18.3.5.9.6.5.23
current directory name used. This number is the same as wfFrSwUsageDirectory except when the user sets wfFrSwUsageDirectory to an invalid name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfFrSwUsageCurFilePrefix 1.3.6.1.4.1.18.3.5.9.6.5.24
current base file name used. This number is the same as wfFrSwUsageFilePrefix except when the user sets wfFrSwUsageFilePrefix to an invalid name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfFrSwUsageCurTimerInterval 1.3.6.1.4.1.18.3.5.9.6.5.25
current timer interval number used. This number is the same as wfFrSwUsageTimerInterval except when the user sets wfFrSwUsageTimerInterval to an invalid value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..60  

wfFrSwUsageCurUpdateInterval 1.3.6.1.4.1.18.3.5.9.6.5.26
current update interval number used. This number is the same as wfFrSwUsageUpdateInterval except when the user sets wfFrSwUsageUpdateInterval to an invalid value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

wfFrSwUsageCurStoreInterval 1.3.6.1.4.1.18.3.5.9.6.5.27
current store timer interval number used. This number is the same as wfFrSwUsageStoreInterval except when the user sets wfFrSwUsageStoreInterval to an invalid value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

wfFrSwUsageCurFlushInterval 1.3.6.1.4.1.18.3.5.9.6.5.28
current flush timer interval number used. This number is the same as wfFrSwUsageFlushInterval except when the user sets wfFrSwUsageFlushInterval to an invalid value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

wfFrSwUsageCurCleanupInterval 1.3.6.1.4.1.18.3.5.9.6.5.29
current file cleanup timer interval number used. This number is the same as wfFrSwUsageCleanupInterval except when the user sets wfFrSwUsageCleanupInterval to an invalid value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

wfFrSwUsageDebug 1.3.6.1.4.1.18.3.5.9.6.5.30
Enable/Disable printing of debug edl (trap) messages. NOTE: Do not enable this attribute in operational enviornment as it will likely flood the logging facility. This attribute is reserved for specialized debugging in a controlled lab enviornment.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfFrSwUsageCurDebug 1.3.6.1.4.1.18.3.5.9.6.5.31
current debug value used. This value is the same as wfFrSwUsageDebug except when the user sets wfFrSwUsageDeubg to an invalid value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfFrSwUsageSwitchId 1.3.6.1.4.1.18.3.5.9.6.5.32
switch id used in the billing usage data file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwUsageNumEntries 1.3.6.1.4.1.18.3.5.9.6.5.33
number of entries in wfFrSwUsageTable
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwSvcUsageEnable 1.3.6.1.4.1.18.3.5.9.6.5.34
Enable/Disable FRSW SVC billing.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfFrSwSvcUsageInterimRecordEnable 1.3.6.1.4.1.18.3.5.9.6.5.35
Enable/Disable Writing FRSW SVC billing record while SVC connection is still up.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfFrSwSvcUsageVolume 1.3.6.1.4.1.18.3.5.9.6.5.36
Indicates the file system volume number to which the SVC billing usage data files will be written. The volume number corresponds to the slot number on which the volume resides. Note: Value 0 has the special meaning that no 'Store' and 'Flush' operations will take place. This translates to no Billing data will be written to the local file system. 'Update' operations will still be performed on each local slot. Full Billing statistics will still be available in the wfFrSwUsageTable MIB.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..14  

wfFrSwSvcUsageDirectory 1.3.6.1.4.1.18.3.5.9.6.5.37
The name of the directory where the SVC billing usage data files are stored.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wfFrSwSvcUsageFilePrefix 1.3.6.1.4.1.18.3.5.9.6.5.38
The base name of SVC billing usage data files.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wfFrSwSvcUsageUpdateInterval 1.3.6.1.4.1.18.3.5.9.6.5.39
This number specifies the interval (number of minutes) for the SVC Billing process to collect and update billing usage data in the wfFrSwUsage MIB. Note: When converted to seconds, this must be a multiple of wfFrSwUsageTimerInterval.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..2147483647  

wfFrSwSvcUsageStoreInterval 1.3.6.1.4.1.18.3.5.9.6.5.40
This number specifies the interval (number of minutes) for the SVC Billing process to write billing usage data on to the file system from the wfFrSwUsage MIB. Note: When converted to seconds, this must be a multiple of wfFrSwUsageTimerInterval.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..2147483647  

wfFrSwSvcUsageFlushInterval 1.3.6.1.4.1.18.3.5.9.6.5.41
This number specifies the interval (number of minutes) for the SVC Billing process to write billing usage data on to the file system from the wfFrSwUsage MIB follow by zeroing the wfFrSwUsage MIB. Note: When converted to seconds, this must be a multiple of wfFrSwUsageTimerInterval.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..2147483647  

wfFrSwSvcUsageCleanupInterval 1.3.6.1.4.1.18.3.5.9.6.5.42
This is the interval (number of minutes) for the SVC Billing process to check and delete old billing usage data files. Note: When converted to seconds, this must be a multilple of wfFrSwUsageTimerInterval.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..2147483647  

wfFrSwSvcUsageUpdateTimeStamp 1.3.6.1.4.1.18.3.5.9.6.5.43
Time stamp of last wfFrSwSvcUsageUpdateInterval timer expiration or the starting time of the current wfFrSwSvcUsageUpdateInterval. This value is number of seconds since midnight Jan 1, 1976 (GMT).
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

wfFrSwSvcUsageStoreTimeStamp 1.3.6.1.4.1.18.3.5.9.6.5.44
Time stamp of last wfFrSwSvcUsageStoreInterval timer expiration or the starting time of the current wfFrSwSvcUsageStoreInterval. This value is number of seconds since midnight Jan. 1, 1976 (GMT).
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

wfFrSwSvcUsageFlushTimeStamp 1.3.6.1.4.1.18.3.5.9.6.5.45
Time stamp of last wfFrSwSvcUsageFlushInterval timer expiration or the starting time of the current wfFrSwSvcUsageFlushInterval. This value is number of seconds since midnight Jan. 1, 1976 (GMT).
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

wfFrSwSvcUsageCleanupTimeStamp 1.3.6.1.4.1.18.3.5.9.6.5.46
Time stamp of last wfFrSwSvcUsageCleanupInterval timer expiration or the starting time of the current wfFrSwSvcUsageCleanupInterval. This value is number of seconds since midnight Jan. 1, 1976 (GMT).
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

wfFrSwSvcUsageUpdateData 1.3.6.1.4.1.18.3.5.9.6.5.47
Setting this attribute to a non-zero value will cause an immediate updating of the SVC billing usage data. Once activated, this attribute should be reset to zero to allow subsequent activations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrSwSvcUsageStoreData 1.3.6.1.4.1.18.3.5.9.6.5.48
Setting this attribute to a non-zero value will cause an immediate updating and writing of the SVC billing usage data. Once activated, this attribute should be reset to zero to allow subsequent activations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrSwSvcUsageFlushData 1.3.6.1.4.1.18.3.5.9.6.5.49
Setting this attribute to a non-zero value will cause an immediate updating and writing of the SVC billing usage data and followed by zeroing the wfFrSwBillingUsage MIB. Once activated, this attribute should be reset to zero to allow subsequent activations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrSwSvcUsageFileCleanup 1.3.6.1.4.1.18.3.5.9.6.5.50
Setting this attribute to a non-zero value will cause an immediate checking and deleting old SVC billing usage data files. Once activated, this attribute should be reset to zero to allow subsequent activations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrSwSvcUsageState 1.3.6.1.4.1.18.3.5.9.6.5.51
current state FRSW SVC billing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), init(3), notpresent(4)  

wfFrSwSvcUsageCurVolume 1.3.6.1.4.1.18.3.5.9.6.5.52
current file system volume number used for SVC Billing. This number is the same as wfFrSwSvcUsageVolume except when the user sets wfFrSwSvcUsageVolume to an invalid number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..14  

wfFrSwSvcUsageCurDirectory 1.3.6.1.4.1.18.3.5.9.6.5.53
current directory name used for SVC Billing. This number is the same as wfFrSwSvcUsageDirectory except when the user sets wfFrSwSvcUsageDirectory to an invalid name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfFrSwSvcUsageCurFilePrefix 1.3.6.1.4.1.18.3.5.9.6.5.54
current base file name used for SVC Billing. This name is the same as wfFrSwSvcUsageFilePrefix except when the user sets wfFrSwSvcUsageFilePrefix to an invalid name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfFrSwSvcUsageCurUpdateInterval 1.3.6.1.4.1.18.3.5.9.6.5.55
current update interval number used. This number is the same as wfFrSwSvcUsageUpdateInterval except when the user sets wfFrSwSvcUsageUpdateInterval to an invalid value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

wfFrSwSvcUsageCurStoreInterval 1.3.6.1.4.1.18.3.5.9.6.5.56
current store timer interval number used. This number is the same as wfFrSwSvcUsageStoreInterval except when the user sets wfFrSwSvcUsageStoreInterval to an invalid value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

wfFrSwSvcUsageCurFlushInterval 1.3.6.1.4.1.18.3.5.9.6.5.57
current flush timer interval number used. This number is the same as wfFrSwSvcUsageFlushInterval except when the user sets wfFrSwSvcUsageFlushInterval to an invalid value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

wfFrSwSvcUsageCurCleanupInterval 1.3.6.1.4.1.18.3.5.9.6.5.58
current file cleanup timer interval number used. This number is the same as wfFrSwSvcUsageCleanupInterval except when the user sets wfFrSwSvcUsageCleanupInterval to an invalid value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

wfFrSwSvcUsageNumEntries 1.3.6.1.4.1.18.3.5.9.6.5.59
number of entries in wfFrSwSvcUsageTable
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwSvcUsageVersionId 1.3.6.1.4.1.18.3.5.9.6.5.60
The Software Version ID field is a two byte, right justified, binary formated value that identifies the particular version number of the software release. High nibble of byte 1 represents the major version number. Low nibble of byte 1 represents the release number. Byte 2 represents the integration number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwUsageSwitchName 1.3.6.1.4.1.18.3.5.9.6.5.61
The Switch name is a 6-bytes, right justified with leading blanks as necessary. It can be combination of letters, numbers and blanks. This ID identifies the particular networks equipment for SVC billing usage data process.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wfFrSwPvcUsageFileLayout 1.3.6.1.4.1.18.3.5.9.6.5.62
PVC usage file layout version
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwSvcUsageFileLayout 1.3.6.1.4.1.18.3.5.9.6.5.63
SVC usage file layout version
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwUsageTable 1.3.6.1.4.1.18.3.5.9.6.6
The Billing usage table.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfFrSwUsageEntry

wfFrSwUsageEntry 1.3.6.1.4.1.18.3.5.9.6.6.1
The parameters for Billing Usage.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  WfFrSwUsageEntry  

wfFrSwUsageDelete 1.3.6.1.4.1.18.3.5.9.6.6.1.1
Indicates status of this entry. FRSW_USAGE_CREATED is the normal case. FRSW_USAGE_DELETED means the corresponding tuple and vc instances were deleted some time during this collection interval. This billing instance will be deleted at the end of the next wfFrSwUsageFlush period after this billing record is written out to the file system.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfFrSwUsageCircuitNumber 1.3.6.1.4.1.18.3.5.9.6.6.1.2
Instance identifier; the circuit number of this interface.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwUsageDlci 1.3.6.1.4.1.18.3.5.9.6.6.1.3
Instance identifier; this indicates which virtual circuit.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER twobyteminimum(16), twobytemaximum(1007), threebyteminimum(1024), threebytemaximum(64511), fourbyteminimum(131072), fourbytemaximum(8257535)  

wfFrSwUsageIPAddress 1.3.6.1.4.1.18.3.5.9.6.6.1.4
(Local) IP address corresponding to wfFrSwUsageCircuitNumber of this virtual circuit.
Status: obsolete Access: read-only
OBJECT-TYPE    
  IpAddress  

wfFrSwUsageStartTimeStampHigh 1.3.6.1.4.1.18.3.5.9.6.6.1.5
Time stamp of the starting time (the high 32 bits) of last billing usage interval. This value is the number of 1/100th seconds since midnight Jan 1, 1976 (GMT).
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwUsageStartTimeStampLow 1.3.6.1.4.1.18.3.5.9.6.6.1.6
Time stamp of the starting time (the low 32 bits) of last billing usage interval. This value is the number of 1/100th seconds since midnight Jan 1, 1976 (GMT).
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwUsageEndTimeStampHigh 1.3.6.1.4.1.18.3.5.9.6.6.1.7
Time stamp of the ending time (the high 32 bits) of last billing usage interval. This value is the number of 1/100th seconds since midnight Jan 1, 1976 (GMT).
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwUsageEndTimeStampLow 1.3.6.1.4.1.18.3.5.9.6.6.1.8
Time stamp of the ending time (the low 32 bits) of last billing usage interval. This value is the number of 1/100th seconds since midnight Jan 1, 1976 (GMT).
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwUsageSentNonDEFramesHigh 1.3.6.1.4.1.18.3.5.9.6.6.1.9
Number (the high 32 bits) of local frames sent from this virtual circuit between wfFrSwUsageStartTimeStamp and wfFrSwUsageEndTimeStamp.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwUsageSentNonDEFramesLow 1.3.6.1.4.1.18.3.5.9.6.6.1.10
Number (the low 32 bits) of local frames sent from this virtual circuit between wfFrSwUsageStartTimeStamp and wfFrSwUsageEndTimeStamp.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwUsageSentNonDEOctetsHigh 1.3.6.1.4.1.18.3.5.9.6.6.1.11
Number (the high 32 bits) of local octets sent from this virtual circuit between wfFrSwUsageStartTimeStamp and wfFrSwUsageEndTimeStamp.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwUsageSentNonDEOctetsLow 1.3.6.1.4.1.18.3.5.9.6.6.1.12
Number (the low 32 bits) of local octets sent from this virtual circuit between wfFrSwUsageStartTimeStamp and wfFrSwUsageEndTimeStamp.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwUsageSentDEFramesHigh 1.3.6.1.4.1.18.3.5.9.6.6.1.13
Number (the high 32 bits) of local frames with DE bit sent from this virtual circuit between wfFrSwUsageStartTimeStamp and wfFrSwUsageEndTimeStamp.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwUsageSentDEFramesLow 1.3.6.1.4.1.18.3.5.9.6.6.1.14
Number (the low 32 bits) of local frames with DE bit sent from this virtual circuit between wfFrSwUsageStartTimeStamp and wfFrSwUsageEndTimeStamp.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwUsageSentDEOctetsHigh 1.3.6.1.4.1.18.3.5.9.6.6.1.15
Number (the high 32 bits) of local octets with DE bit sent from this virtual circuit between wfFrSwUsageStartTimeStamp and wfFrSwUsageEndTimeStamp.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwUsageSentDEOctetsLow 1.3.6.1.4.1.18.3.5.9.6.6.1.16
Number (the low 32 bits) of local octets with DE bit sent from this virtual circuit between wfFrSwUsageStartTimeStamp and wfFrSwUsageEndTimeStamp.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwUsageLastNonDEFramesHigh 1.3.6.1.4.1.18.3.5.9.6.6.1.17
The (high 32 bits) value of wfFrSwCctLocalSentNonDEFrames value at wfFrSwUsageEndTimeStamp. Note: Since wfFrSwCctLocalSentNonDEFrames is a 32-bit COUNTER, this is really a counter keeping track of number of times wfFrSwCctLocalSentNonDEFrames has wrapped around.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwUsageLastNonDEFramesLow 1.3.6.1.4.1.18.3.5.9.6.6.1.18
The (low 32 bits) value of wfFrSwCctLocalSentNonDEFrames value at wfFrSwUsageEndTimeStamp.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwUsageLastNonDEOctetsHigh 1.3.6.1.4.1.18.3.5.9.6.6.1.19
The (high 32 bits) value of wfFrSwCctLocalSentNonDEOctets value at wfFrSwUsageEndTimeStamp. Note: Since wfFrSwCctLocalSentNonDEOctets is a 32-bit COUNTER, this is really a counter keeping track of number of times wfFrSwCctLocalSentNonDEOctets has wrapped around.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwUsageLastNonDEOctetsLow 1.3.6.1.4.1.18.3.5.9.6.6.1.20
The (low 32 bits) value of wfFrSwCctLocalSentNonDEOctets value at wfFrSwUsageEndTimeStamp.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwUsageLastDEFramesHigh 1.3.6.1.4.1.18.3.5.9.6.6.1.21
The (high 32 bits) value of wfFrSwCctLocalSentDEFrames value at wfFrSwUsageEndTimeStamp. Note: Since wfFrSwCctLocalSentNonDEFrames is a 32-bit COUNTER, this is really a counter keeping track of number of times wfFrSwCctLocalSentDEFrames has wrapped around.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwUsageLastDEFramesLow 1.3.6.1.4.1.18.3.5.9.6.6.1.22
The (low 32 bits) value of wfFrSwCctLocalSentDEFrames value at wfFrSwUsageEndTimeStamp.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwUsageLastDEOctetsHigh 1.3.6.1.4.1.18.3.5.9.6.6.1.23
The (high 32 bits) value of wfFrSwCctLocalSentDEOctets value at wfFrSwUsageEndTimeStamp. Note: Since wfFrSwCctLocalSentDEOctets is a 32-bit COUNTER, this is really a counter keeping track of number of times wfFrSwCctLocalSentDEOctets has wrapped around.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwUsageLastDEOctetsLow 1.3.6.1.4.1.18.3.5.9.6.6.1.24
The (low 32 bits) value of wfFrSwCctLocalSentDEOctets value at wfFrSwUsageEndTimeStamp.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwUsageRemoteIPAddress 1.3.6.1.4.1.18.3.5.9.6.6.1.25
IP address of the other side (remote) of this PVC endpoint.
Status: obsolete Access: read-only
OBJECT-TYPE    
  IpAddress  

wfFrSwUsageRemoteDlci 1.3.6.1.4.1.18.3.5.9.6.6.1.26
DLCI number of the other side (remote) of this PVC endpoint.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER twobyteminimum(16), twobytemaximum(1007), threebyteminimum(1024), threebytemaximum(64511), fourbyteminimum(131072), fourbytemaximum(8257535)  

wfFrSwVcTable 1.3.6.1.4.1.18.3.5.9.6.7
Frame Relay Virtual Circuit table gives information about a virtual circuit.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfFrSwVcEntry

wfFrSwVcEntry 1.3.6.1.4.1.18.3.5.9.6.7.1
An entry in the Frame Relay (Virtual) Circuit table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfFrSwVcEntry  

wfFrSwVcDelete 1.3.6.1.4.1.18.3.5.9.6.7.1.1
Indication to delete this virtual circuit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2), system(3), svc(4), spvccra(5), spvccaa(6)  

wfFrSwVcCircuit 1.3.6.1.4.1.18.3.5.9.6.7.1.2
Instance identifier; the circuit number of this interface (logical port).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwVcDlci 1.3.6.1.4.1.18.3.5.9.6.7.1.3
Instance identifier; this indicates the virtual circuit identifier
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwVcState 1.3.6.1.4.1.18.3.5.9.6.7.1.4
Indicates whether the particular virtual circuit is operational.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER invalid(1), active(2), inactive(3), control(4), user(5)  

wfFrSwVcStateSet 1.3.6.1.4.1.18.3.5.9.6.7.1.5
User access for setting the state of a virtual circuit
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER inactive(1), active(2)  

wfFrSwVcMulticast 1.3.6.1.4.1.18.3.5.9.6.7.1.6
Indicates whether this dlci is used for multicast or a single destination.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER multicast(1), unicast(2)  

wfFrSwVcInBe 1.3.6.1.4.1.18.3.5.9.6.7.1.7
Indicates the maximum number Incoming Excess Burst bits that are allowed in a configured time interval (T).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwVcOutBe 1.3.6.1.4.1.18.3.5.9.6.7.1.8
Indicates the Outgoing Excess Burst bits for this virtual circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwVcInThroughput 1.3.6.1.4.1.18.3.5.9.6.7.1.9
Indicates the incoming throughput in bits/sec for this virtual circuit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrSwVcOutThroughput 1.3.6.1.4.1.18.3.5.9.6.7.1.10
Indicates the outgoing throughput in bits/sec for this virtual circuit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrSwVcOutBc 1.3.6.1.4.1.18.3.5.9.6.7.1.11
Indicates the Outgoing Committed Burst bits for this virtual circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwVcInBc 1.3.6.1.4.1.18.3.5.9.6.7.1.12
Indicates the Incoming Committed Burst bits for this virtual circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwVcInBcOctets 1.3.6.1.4.1.18.3.5.9.6.7.1.13
Indicates the Incoming Committed Burst in octets for this virtual circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwVcBecnState 1.3.6.1.4.1.18.3.5.9.6.7.1.14
Indicates the BECN state
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwVcReportedStatus 1.3.6.1.4.1.18.3.5.9.6.7.1.15
Record keeping for circuit status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER acked(1), unacked(2), unreported(3)  

wfFrSwVcReceivedStatus 1.3.6.1.4.1.18.3.5.9.6.7.1.16
State of a virtual circuit as reported by the network at an NNI
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), active(2)  

wfFrSwVcCrossNetStatus 1.3.6.1.4.1.18.3.5.9.6.7.1.17
State of a virtual circuit as reported by the other end of the network under bidirectional signalling.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), active(2)  

wfFrSwVcXNetSent 1.3.6.1.4.1.18.3.5.9.6.7.1.18
Whether we have sent a cross net status message for this VC yet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unsent(1), sent(2)  

wfFrSwVcXNetReceived 1.3.6.1.4.1.18.3.5.9.6.7.1.19
Whether we have received a cross net status message for this VC during the current polling interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER recv(1), unrecv(2)  

wfFrSwVcCalledIpAddr 1.3.6.1.4.1.18.3.5.9.6.7.1.20
Indicates the IP address associated with destination of a virtual circuit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

wfFrSwVcCalledDlci 1.3.6.1.4.1.18.3.5.9.6.7.1.21
Indicates the DLCI associated with destination of a virtual circuit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 16..8257535  

wfFrSwVcTrfPriority 1.3.6.1.4.1.18.3.5.9.6.7.1.22
Defines the traffic priority level of all the incoming packets on this VC. FRSW_VCPRIORITY_DEFAULT - Set all incoming user traffic packets to the default priority used by the port. FRSW_VCPRIORITY_ONE - Set all incoming packets to priority 1. FRSW_VCPRIORITY_TWO - Set all incoming packets to priority 2. FRSW_VCPRIORITY_THREE - Set all incoming packets to priority 3. Priority 0 is reserved for network critical packets like OSPF, FR LMI and SMDS heartbeat and is not available for user traffic.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER one(1), two(2), three(3), default(999)  

wfFrSwVcCreationTime 1.3.6.1.4.1.18.3.5.9.6.7.1.23
Indicates the value of sysUpTime when the VC was created.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

wfFrSwVcLastTimeChange 1.3.6.1.4.1.18.3.5.9.6.7.1.24
Indicates the value of sysUpTime when last there was a change in VC state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

wfFrSwVcTxNonDeFrames 1.3.6.1.4.1.18.3.5.9.6.7.1.25
Indicates the number of frames without the DE bit sent on this virtual circuit over the interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwVcTxNonDeOctets 1.3.6.1.4.1.18.3.5.9.6.7.1.26
Indicates the number of octets without DE bit sent on this virtual circuit over the interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwVcTxDeFrames 1.3.6.1.4.1.18.3.5.9.6.7.1.27
Indicates the number of frames with DE bit set sent on this virtual circuit over the interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwVcTxDeOctets 1.3.6.1.4.1.18.3.5.9.6.7.1.28
Indicates the number of octets with DE bit set sent on this virtual circuit over the interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwVcSetFecnFrames 1.3.6.1.4.1.18.3.5.9.6.7.1.29
Indicates the number of frames sent to the interface on which this switch set the FECN bit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwVcSetFecnOctets 1.3.6.1.4.1.18.3.5.9.6.7.1.30
Indicates the number of octets in frames sent to the interface on which this switch set the FECN bit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwVcSetBecnFrames 1.3.6.1.4.1.18.3.5.9.6.7.1.31
Indicates the number of frames sent to the interface on which this switch set the BECN bit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwVcSetBecnOctets 1.3.6.1.4.1.18.3.5.9.6.7.1.32
Indicates the number of octets in frames sent to the interface on which this switch set the BECN bit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwVcSetDeFrames 1.3.6.1.4.1.18.3.5.9.6.7.1.33
Indicates the number of frames sent to the interface on which this switch set the DE bit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwVcSetDeOctets 1.3.6.1.4.1.18.3.5.9.6.7.1.34
Indicates the number of octets in frames sent to the interface on which this switch set the DE bit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwVcDropNonDeFrames 1.3.6.1.4.1.18.3.5.9.6.7.1.35
Indicates the number of frames received over the interface which were discarded, excluding any frames with the DE bit set.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwVcDropNonDeOctets 1.3.6.1.4.1.18.3.5.9.6.7.1.36
Indicates the number of octets in frames received over the interface which were discarded, excluding any frames with the DE bit set.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwVcDropDeFrames 1.3.6.1.4.1.18.3.5.9.6.7.1.37
Indicates the number of frames received over the interface, having the DE bit set, which were discarded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwVcDropDeOctets 1.3.6.1.4.1.18.3.5.9.6.7.1.38
Indicates the number of octets in frames received over the interface, having the DE bit set, which were discarded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwVcInactiveVcDropFrames 1.3.6.1.4.1.18.3.5.9.6.7.1.39
Indicates how many frames were discarded because the virtual circuit was inactive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwVcInactiveVcDropOctets 1.3.6.1.4.1.18.3.5.9.6.7.1.40
Indicates how many Octets were discarded because the virtual circuit was inactive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwVcRecvNonDeFrames 1.3.6.1.4.1.18.3.5.9.6.7.1.41
Indicates the number of frames received on this virtual circuit over the interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwVcRecvNonDeOctets 1.3.6.1.4.1.18.3.5.9.6.7.1.42
Indicates the number of octets received on this virtual circuit over the interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwVcRecvDeFrames 1.3.6.1.4.1.18.3.5.9.6.7.1.43
Indicates the number of frames received over the interface with the DE bit set.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwVcRecvDeOctets 1.3.6.1.4.1.18.3.5.9.6.7.1.44
Indicates the number of octets in frames received over the interface with the DE bit set.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwVcRecvFecnFrames 1.3.6.1.4.1.18.3.5.9.6.7.1.45
Indicates the number of frames received over the interface with the FECN bit set.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwVcRecvFecnOctets 1.3.6.1.4.1.18.3.5.9.6.7.1.46
Indicates the number of octets in frames received over the interface with the FECN bit set.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwVcRecvBecnFrames 1.3.6.1.4.1.18.3.5.9.6.7.1.47
Indicates the number of frames received over the interface with the BECN bit set.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwVcRecvBecnOctets 1.3.6.1.4.1.18.3.5.9.6.7.1.48
Indicates the number of octets in frames received over the interface with the BECN bit set.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwVcRecentNonDeOctets 1.3.6.1.4.1.18.3.5.9.6.7.1.49
Indicates the number of octets received over the interface during the most recent sampling period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwVcXNetErrors 1.3.6.1.4.1.18.3.5.9.6.7.1.50
This is the count of the consecutive errors (usually timeouts) against this VC in cross-network heartbeat polling.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwVcDropExcessBurstFrames 1.3.6.1.4.1.18.3.5.9.6.7.1.51
Indicates the number of Excess Burst Frames dropped on this virtual circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwVcDropExcessBurstOctets 1.3.6.1.4.1.18.3.5.9.6.7.1.52
Indicates the number of Excess Burst Octets dropped on this virtual circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwVcInBeOctets 1.3.6.1.4.1.18.3.5.9.6.7.1.53
Indicates the maximum number Incoming Excess Burst bytes that are allowed in a configured time interval (T).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwVcCfgInBe 1.3.6.1.4.1.18.3.5.9.6.7.1.54
The number of Excess Burst in bits
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrSwVcRedirectAction 1.3.6.1.4.1.18.3.5.9.6.7.1.55
Perform pvc source redirect manually or based on cross-net updates: 'redirecttoprimary(2)' will force to switch to primary; 'redirecttobackup(3)' will force to switch to backup; 'switchondemand(4)' will switch based on cross-net status of the primary to and from primary; 'swondemandtoprimary(5)' will switch to primary from backup iff cross-net of primary became active; 'swondemandtobackup(6)' will switch to backup from primary iff cross-net of primary became inactive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER redirecttoprimary(2), redirecttobackup(3), switchondemand(4), swondemandtoprimary(5), swondemandtobackup(6)  

wfFrSwVcRedirectType 1.3.6.1.4.1.18.3.5.9.6.7.1.56
Type of dte notification at switching time: 'transparent(1)' will not send notification to dte; 'intrusiven(2)' will send async update with NEW bit; 'intrusivea(3)' will send async update with A bit not set.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER transparent(1), intrusiven(2), intrusivea(3)  

wfFrSwVcRedirectState 1.3.6.1.4.1.18.3.5.9.6.7.1.57
PVC Source Redirect State: 'backupinactive(1)' - backup is not configured and/or cross-net status is inactive; will allow traffic only through primary. 'primaryactive(2)' - both primary and backup rx'ed 'active' cross-net status, currently primary is active and traffic only through primary. 'switchtobackup(3)' - primary cross-net status is inactive, but can not switch to backup due to manual (or semi-manual) operation of the redirect; will allow traffic only through primary. 'backupactive(12)' - cross-net status is 'inactive' for primary; will allow traffic only through backup. 'switchtoprimary(13)' - cross-net status is 'active' for primary, should by can not switch to primary due to manual (or semi-manual) operation of the redirect; will allow traffic only through backup. 'holddown(21)' - down state used as intermediate state at switching time (for not more then a second); all traffic is dropped.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER backupinactive(1), primaryactive(2), switchtobackup(3), backupactive(12), switchtoprimary(13), holddown(21)  

wfFrSwVcBackupCalledIpAddr 1.3.6.1.4.1.18.3.5.9.6.7.1.58
Backup Called Ip Address of the remote end of the PVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

wfFrSwVcBackupCalledDlci 1.3.6.1.4.1.18.3.5.9.6.7.1.59
Backup Called Dlci of the remote end of the PVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 16..8257535  

wfFrSwVcBackupCrossNetStatus 1.3.6.1.4.1.18.3.5.9.6.7.1.60
Cross net status of the backup remote end of the PVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), active(2)  

wfFrSwVcBackupCrossNetErrors 1.3.6.1.4.1.18.3.5.9.6.7.1.61
Support counter of missed cross net update from backup remote end of the PVC, range: [0, wfFrSwDlcmiCrossNetErrorThreshold].
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwVcAtmIwfMode 1.3.6.1.4.1.18.3.5.9.6.7.1.62
This attribute indicates the mode of FR-ATM interworking over this FR PVC or that FR-ATM interworking is not enabled on it.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER atmDisableIwfMode(1), atmServiceIwfTransparentMode(2), atmServiceIwfTranslationMode(3), atmNetworkIwfMode(4)  

wfFrSwVcAtmIwfVPI 1.3.6.1.4.1.18.3.5.9.6.7.1.63
This is relevant only when the ATM/FR interworking is enabled for this PVC. This indicates the ATM virtual path identifier associated with the Frame Relay PVC described by this record virtual circuit identifier.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

wfFrSwVcAtmIwfVCI 1.3.6.1.4.1.18.3.5.9.6.7.1.64
This is relevant only when FR/ATM interworking is enabled for this PVC. This indicates the ATM virtual circuit identifier associated with the Frame Relay PVC described by this record.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 32..65535  

wfFrSwVcAtmIwfLossPriorityPolicy 1.3.6.1.4.1.18.3.5.9.6.7.1.65
This is relevant only when FR/ATM interworking is enabled for this FR PVC. This indicates the policy for translating ATM CLP to FR DE on this PVC or simply setting FR DE to a constant value for all frames.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER atmiwfmapDe(1), atmiwfsetDe1(2), atmiwfsetDe0(3)  

wfFrSwVcAtmIwfDePolicy 1.3.6.1.4.1.18.3.5.9.6.7.1.66
This is relevant only when FR/ATM interworking is enabled for this FR PVC. This indicates the policy on this PVC for translating FR DE to ATM CLP or simply setting CLP to a constant value for all frames.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER atmiwfmapClp(1), atmiwfsetClp1(2), atmiwfsetClp0(3)  

wfFrSwVcAtmIwfEfciPolicy 1.3.6.1.4.1.18.3.5.9.6.7.1.67
This is relevant only when FR/ATM interworking is enabled for this FR PVC. This indicates the policy on this PVC for translating FR FECN to ATM EFCI or simply setting ATM EFCI to a constant value for all frames.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER atmiwfmapFecn(1), atmiwfsetFecn1(2), atmiwfsetFecn0(3)  

wfFrSwVcEscapeEnable 1.3.6.1.4.1.18.3.5.9.6.7.1.68
Identifies this PVC as either a standard FRSW PVC (escape disabled) or an Escape PVC (escape enabled). The type of Escape PVC (ingress node or egress node) is specified in the wfFrSwDlcmiEntry Object.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfFrSwVcSpvcCallState 1.3.6.1.4.1.18.3.5.9.6.7.1.69
Indicates to the state of the SPVC call for this DLCI.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), inprogress(2), active(3)  

wfFrSwVcCallReqCalledAddr 1.3.6.1.4.1.18.3.5.9.6.7.1.70
Called E.164/X.121 Address for an SPVC Call Request Agent. The address type is determined by the wfFrSwDlcmiL2AddrType attribute in wfFrSwDlcmiEntry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wfFrSwVcCallReqDlciSelectionType 1.3.6.1.4.1.18.3.5.9.6.7.1.71
Indicates to the Calling End of an SPVC Call Request whether to use any available DLCI, or a specific DLCI. If 'specific' is chosen, the called DLCI value is specified in wfFrSwVcCallReqCalledDlci.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER any(1), specific(2)  

wfFrSwVcCallReqCalledDlci 1.3.6.1.4.1.18.3.5.9.6.7.1.72
Indicates to the Calling End of an SPVC Call Request the DLCI to be used at the destination of a virtual circuit. This value should be specified when 'specific' wfFrSwVcCallReqDlciSelectionType is chosen.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 16..8257535  

wfFrSwVcCallReqRetryTimer 1.3.6.1.4.1.18.3.5.9.6.7.1.73
Indicates the number of minutes the Call Request Agent should wait for an SPVC CONNECT message before declaring a Call Setup request REJECTED.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..60  

wfFrSwVcCallReqMaxRetries 1.3.6.1.4.1.18.3.5.9.6.7.1.74
Indicates the number of times the Call Request Agent should retry failed Call Setup requests before declaring the SPVC invalid.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrSwIsdnBaseTable 1.3.6.1.4.1.18.3.5.9.6.8
This is a FRSW over ISDN configuration table. This table specifies whether the Calling Party (ANI) or Called Party (DNIS) ISDN Phone Number should be used to map the ISDN call to a particular FRSW UNI. The table is indexed by the Slot Number where the PRI(s) exist.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfFrSwIsdnBaseEntry

wfFrSwIsdnBaseEntry 1.3.6.1.4.1.18.3.5.9.6.8.1
Instance Id for this table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfFrSwIsdnBaseEntry  

wfFrSwIsdnBaseDelete 1.3.6.1.4.1.18.3.5.9.6.8.1.1
Indication to delete this FRSW ISDN interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfFrSwIsdnBaseSlotNum 1.3.6.1.4.1.18.3.5.9.6.8.1.2
This number is the Slot Number for the PRI interface(s) that are being configured for FRSW ISDN. There will be one of these tables for every slot where an FRSW ISDN PRI Interface exists.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwIsdnBaseAssocType 1.3.6.1.4.1.18.3.5.9.6.8.1.3
Indicates which ISDN Phone Number (ANI or DNIS) to use to do the ISDN call to FRSW UNI mapping.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER dnis(1), ani(2)  

wfFrSwIsdnAssocTable 1.3.6.1.4.1.18.3.5.9.6.9
This table defines the Association Table to be used for the FRSW over ISDN application. The table contains a list of ISDN Phone Numbers and the associated FRSW UNI Index Number. The table is indexed by the Slot Number and the ISDN Phone Number.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfFrSwIsdnAssocEntry

wfFrSwIsdnAssocEntry 1.3.6.1.4.1.18.3.5.9.6.9.1
Instance Id for this table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfFrSwIsdnAssocEntry  

wfFrSwIsdnAssocDelete 1.3.6.1.4.1.18.3.5.9.6.9.1.1
Indication to delete this Association Instance.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfFrSwIsdnAssocSlotNum 1.3.6.1.4.1.18.3.5.9.6.9.1.2
Slot with which this ISDN Phone Number is associated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwIsdnAssocNum 1.3.6.1.4.1.18.3.5.9.6.9.1.3
ISDN Phone Number that is used to look up the appropriate FRSW UNI Index. This number is compared with either the Calling Party Number (ANI) Information Element or the Called Party Number (DNIS) Information Element contained in the ISDN Call Setup Message.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wfFrSwIsdnAssocScrnEnable 1.3.6.1.4.1.18.3.5.9.6.9.1.4
Indicate whether allowed screening should be enabled or disabled for all of the UNIs contained in the FRSW UNI Index.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfFrSwIsdnAssocIndex 1.3.6.1.4.1.18.3.5.9.6.9.1.5
A number that indicates the FRSW UNI Index that is is associated with the ISDN Phone Number. This FRSW UNI Index is used as a key to obtain the UNIs and the Screening information from the wfFrSwIsdnScrnEntry and wfFrSwIsdnUniEntry mibs. The default for the index is 2**31 - 1 = 2147483647 = 0x7FFFFFFF, which represents an unconfigured index number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrSwIsdnUniTable 1.3.6.1.4.1.18.3.5.9.6.10
This table is used by the FRSW over ISDN application. The table defines a list of FRSW UNIs that are to be collected into a hunt group identifiable by an Index Number.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfFrSwIsdnUniEntry

wfFrSwIsdnUniEntry 1.3.6.1.4.1.18.3.5.9.6.10.1
Instance Id for this table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfFrSwIsdnUniEntry  

wfFrSwIsdnUniDelete 1.3.6.1.4.1.18.3.5.9.6.10.1.1
Indication to delete this FRSW UNI Index Instance.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfFrSwIsdnUniIndex 1.3.6.1.4.1.18.3.5.9.6.10.1.2
FRSW UNI Index -- a number that identifies a group of related FRSW UNIs that are collected together as a hunt group. This number ties this entry to an entry in wfFrSwIsdnAssocEntry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwIsdnUniNum 1.3.6.1.4.1.18.3.5.9.6.10.1.3
A FRSW UNI/Circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwIsdnUniState 1.3.6.1.4.1.18.3.5.9.6.10.1.4
State of this UNI (available or in-use).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER available(1), inuse(2)  

wfFrSwIsdnScrnTable 1.3.6.1.4.1.18.3.5.9.6.11
This is the incoming call screening table for the FRSW over ISDN application. The table consists of a FRSW UNI Index and a list of allowable ISDN Phone numbers for that FRSW UNI Index. The table is indexed by both the FRSW UNI Index and the ISDN Phone Number. This table is referenced only when the wfFrSwIsdnAssocScrnEnable is set to Enabled for this FRSW UNI Index.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfFrSwIsdnScrnEntry

wfFrSwIsdnScrnEntry 1.3.6.1.4.1.18.3.5.9.6.11.1
Instance Id for this table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfFrSwIsdnScrnEntry  

wfFrSwIsdnScrnDelete 1.3.6.1.4.1.18.3.5.9.6.11.1.1
Indication to delete this Scrn Instance.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfFrSwIsdnScrnIndex 1.3.6.1.4.1.18.3.5.9.6.11.1.2
FRSW UNI Index - A number that ties this entry to an entry in wfFrSwIsdnAssocEntry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwIsdnScrnNum 1.3.6.1.4.1.18.3.5.9.6.11.1.3
ISDN Phone Number of a user authorized to access the UNIs contained in the FRSW UNI Index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wfFrSwSigTable 1.3.6.1.4.1.18.3.5.9.6.12
The Frame relay signalling table contains frame relay signalling entries indexed by the frame relay access channel circuit number. An instance of wfFrSwSigEntry is required for each frame relay access channel with frame relay signalling enabled. The absence of wfFrSwSigEntry for a given frame relay access channel implies that frame relay signalling is disabled for the circuit. Note that the terms 'incoming' and 'outgoing' refer to the frame mode call with respect to the network side of the interface. The terminology used by CCITT Q.933/Q.931 is different.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfFrSwSigEntry

wfFrSwSigEntry 1.3.6.1.4.1.18.3.5.9.6.12.1
An entry in the Frame Relay signalling port information table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfFrSwSigEntry  

wfFrSwSigDelete 1.3.6.1.4.1.18.3.5.9.6.12.1.1
Indication to delete this instance
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfFrSwSigCircuit 1.3.6.1.4.1.18.3.5.9.6.12.1.2
The circuit number for this frame relay access channel
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwSigSvcDlciLow 1.3.6.1.4.1.18.3.5.9.6.12.1.3
Lowest DLCI to be used for SVC, the default value is for 2 octet frame header
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

wfFrSwSigSvcDlciHigh 1.3.6.1.4.1.18.3.5.9.6.12.1.4
Highest DLCI to be used for SVC, the default value is for 2 octet frame header.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

wfFrSwSigDlciAssign 1.3.6.1.4.1.18.3.5.9.6.12.1.5
Determines if DLCI's are assigned starting at wfFrSwSigSvcDlciHigh and working towards wfFrSwSigSvcDlciLow or vice versa.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER increment(1), decrement(2)  

wfFrSwSigMaxNumOfSvcs 1.3.6.1.4.1.18.3.5.9.6.12.1.6
Indicates the maximum number of simultaneous switched virtual circuits allowed on the logical line.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

wfFrSwSigNumOfSvcsInUse 1.3.6.1.4.1.18.3.5.9.6.12.1.7
Indicates the number of switched virtual circuits in use on the logical line.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwSigDefaultThroughput 1.3.6.1.4.1.18.3.5.9.6.12.1.8
This value is used by the network in the Link Layer Core Parameters IE incoming & outgoing throughput fields when they are not included in the setup message by the user.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

wfFrSwSigDefaultMinAcceptThroughput 1.3.6.1.4.1.18.3.5.9.6.12.1.9
This value is used by the network in the Link Layer Core Parameters IE incoming & outgoing minimum acceptable throughput fields when they are not included in the setup message by the user.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

wfFrSwSigDefaultBc 1.3.6.1.4.1.18.3.5.9.6.12.1.10
This value is used by the network in the Link Layer Core Parameters IE incoming & outgoing Bc fields when they are not included in the setup message by the user.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

wfFrSwSigDefaultBe 1.3.6.1.4.1.18.3.5.9.6.12.1.11
This value is used by the network in the Link Layer Core Parameters IE incoming & outgoing Be fields when they are not included in the setup message by the user.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

wfFrSwSigMaxInThroughputPerSvc 1.3.6.1.4.1.18.3.5.9.6.12.1.12
This is the maximum incoming throughput that any single SVC may negotiate for a call. Calls requesting in excess of this attribute are rejected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

wfFrSwSigMaxOutThroughputPerSvc 1.3.6.1.4.1.18.3.5.9.6.12.1.13
This is the maximum outgoing throughput that any single SVC may negotiate for a call. Calls requesting in excess of this attribute are rejected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

wfFrSwSigTotalInNegotiableThroughput 1.3.6.1.4.1.18.3.5.9.6.12.1.14
This is the total maximum incoming throughput that is available for all frame mode calls on the port. If the sum of the incoming throughput requested by a call and wfFrSwSigTotalInCurrentThroughput is in excess of this value, the call is rejected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

wfFrSwSigTotalInCurrentThroughput 1.3.6.1.4.1.18.3.5.9.6.12.1.15
This is the total incoming throughput that has been negotiated for use by all SVC's on the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwSigTotalOutNegotiableThroughput 1.3.6.1.4.1.18.3.5.9.6.12.1.16
This is the total maximum outgoing throughput that is available for all frame mode calls on the port. If the sum of the outgoing throughput requested by a call and wfFrSwSigTotalOutCurrentThroughput is in excess of this value, the call is rejected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

wfFrSwSigTotalOutCurrentThroughput 1.3.6.1.4.1.18.3.5.9.6.12.1.17
This is the total incoming throughput that has been negotiated for use by all SVC's on the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwSigXNetClearingDisable 1.3.6.1.4.1.18.3.5.9.6.12.1.18
If cross-net polling (wfFrSwDlcmiCrossNetEnable) is enabled on this interface, and the error threshold (wfFrSwDlcmiCrossNetErrorThreshold) is exceeded, the network can clear the call.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wfFrSwSigCallingPartyIEMandatory 1.3.6.1.4.1.18.3.5.9.6.12.1.19
Reject the call if the Calling Party IE is absent in the setup message or if the provided Calling Party IE fails address authentication tests againt the configured address(es) on the ingress logical line.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfFrSwSigT301 1.3.6.1.4.1.18.3.5.9.6.12.1.20
Timer number: T301 default time-out: 3 min state of call: call initiated cause for start: incoming setup normal stop: outgoing connect at the first expiry: clear call at the second expiry: timer not restarted
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..10  

wfFrSwSigT303 1.3.6.1.4.1.18.3.5.9.6.12.1.21
Timer number: T303 default time-out: 4 s state of call: call present cause for start: outgoing setup normal stop: incoming connect/call-proceeding/ release-complete at the first expiry: retransmit setup, restart T303 at the second expiry: clear call
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 2..90  

wfFrSwSigT305 1.3.6.1.4.1.18.3.5.9.6.12.1.22
Timer number: T305 default time-out: 30 s state of call: disconnect ind cause for start: outgoing disconnect normal stop: incoming release/disconnect at the first expiry: outgoing release at the second expiry: timer not restarted
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 20..90  

wfFrSwSigT308 1.3.6.1.4.1.18.3.5.9.6.12.1.23
Timer number: T308 default time-out: 4 s state of call: release req cause for start: outgoing release normal stop: incoming release/release-complete at the first expiry: retransmit release, restart T308 at the second expiry: place access channel in maintenance
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 2..90  

wfFrSwSigT310 1.3.6.1.4.1.18.3.5.9.6.12.1.24
Timer number: T310 default time-out: 10 s state of call: incoming call proceeding cause for start: incoming call proceeding normal stop: incoming connect/disconnect at the first expiry: clear call at the second expiry: timer not restarted
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 2..90  

wfFrSwSigT322 1.3.6.1.4.1.18.3.5.9.6.12.1.25
Timer number: T322 default time-out: 4 s state of call: any call state cause for start: outgoing status enquiry normal stop: incoming status/disconnect/ release/release-complete at the first expiry: retransmit status-enq, restart T322 at the second expiry: resend status enq and restart T322
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 2..90  

wfFrSwSigInSetupPkts 1.3.6.1.4.1.18.3.5.9.6.12.1.26
number of incoming setup packets
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwSigInCallProceedingPkts 1.3.6.1.4.1.18.3.5.9.6.12.1.27
number of incoming call proceeding packets
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwSigInConnectPkts 1.3.6.1.4.1.18.3.5.9.6.12.1.28
number of incoming connect packets
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwSigInDisconnectPkts 1.3.6.1.4.1.18.3.5.9.6.12.1.29
number of incoming disconnect packets
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwSigInReleasePkts 1.3.6.1.4.1.18.3.5.9.6.12.1.30
number of incoming release packets
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwSigInReleaseCompletePkts 1.3.6.1.4.1.18.3.5.9.6.12.1.31
number of incoming release complete packets
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwSigInStatusEnquiryPkts 1.3.6.1.4.1.18.3.5.9.6.12.1.32
number of incoming status enquiry packets
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwSigInStatusPkts 1.3.6.1.4.1.18.3.5.9.6.12.1.33
number of incoming status packets
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwSigInUnknownPkts 1.3.6.1.4.1.18.3.5.9.6.12.1.34
number of incoming unknown packets
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwSigOutSetupPkts 1.3.6.1.4.1.18.3.5.9.6.12.1.35
number of outgoing setup packets
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwSigOutCallProceedingPkts 1.3.6.1.4.1.18.3.5.9.6.12.1.36
number of outgoing call proceeding packets
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwSigOutConnectPkts 1.3.6.1.4.1.18.3.5.9.6.12.1.37
number of outgoing connect packets
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwSigOutDisconnectPkts 1.3.6.1.4.1.18.3.5.9.6.12.1.38
number of outgoing disconnect packets
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwSigOutReleasePkts 1.3.6.1.4.1.18.3.5.9.6.12.1.39
number of outgoing release packets
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwSigOutReleaseCompletePkts 1.3.6.1.4.1.18.3.5.9.6.12.1.40
number of outgoing release packest
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwSigOutStatusEnquiryPkts 1.3.6.1.4.1.18.3.5.9.6.12.1.41
number of outgoing status enquiry packets
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwSigOutStatusPkts 1.3.6.1.4.1.18.3.5.9.6.12.1.42
number of outgoing status packets
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwSigRejectedConnRequests 1.3.6.1.4.1.18.3.5.9.6.12.1.43
number of connections rejected
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwSigNwrkAbortedConnections 1.3.6.1.4.1.18.3.5.9.6.12.1.44
number of connections aborted by network
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwSigL2Resets 1.3.6.1.4.1.18.3.5.9.6.12.1.45
number of L2 resets
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSwSigDlciIEAllowed 1.3.6.1.4.1.18.3.5.9.6.12.1.46
Reject the call if the Dlci IE is present in the setup message and wfFrSwSigDlciIEAllowed is set to disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfFrSwSigX213PriorityIEAllowed 1.3.6.1.4.1.18.3.5.9.6.12.1.47
Reject the call if the X213 Priority IE is present in setup message and wfFrSwSigX213PriorityIEAllowed is set to disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfFrSwSigMaximumBe 1.3.6.1.4.1.18.3.5.9.6.12.1.48
This value is the maximum allowed Be for a SVC connection
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

wfFrSwGlobalE164AddrTable 1.3.6.1.4.1.18.3.5.9.6.13
wfFrSwGlobalE164AddrTable is used by Directory Services to translate a range of E.164 addresses into an internal IP network address. E.164 ranges must not ever overlap.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfFrSwGlobalE164AddrEntry

wfFrSwGlobalE164AddrEntry 1.3.6.1.4.1.18.3.5.9.6.13.1
An entry in the Frame Relay Global E.164 Address Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfFrSwGlobalE164AddrEntry  

wfFrSwGlobalE164AddrDelete 1.3.6.1.4.1.18.3.5.9.6.13.1.1
Indication to delete/create this entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfFrSwGlobalE164AddrLow 1.3.6.1.4.1.18.3.5.9.6.13.1.2
Instance identifier; the low end of the E.164 address range. This is an 8-byte fixed length octet string format, right justified with padded leading zeros as necessary.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wfFrSwGlobalE164AddrHigh 1.3.6.1.4.1.18.3.5.9.6.13.1.3
Instance identifier; the high end of the E.164 address range. This is an 8-byte fixed length octet string format, right justified with padded leading zeros as necessary.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wfFrSwGlobalE164AddrIPAddr 1.3.6.1.4.1.18.3.5.9.6.13.1.4
This is the internal IP network address associated with this range of E.164 addresses.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

wfFrSwGlobalX121AddrTable 1.3.6.1.4.1.18.3.5.9.6.14
wfFrSwGlobalX121AddrTable is used by Directory Services to translate a range of X.121 addresses into an internal IP network address. X.121 ranges must not ever overlap.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfFrSwGlobalX121AddrEntry

wfFrSwGlobalX121AddrEntry 1.3.6.1.4.1.18.3.5.9.6.14.1
An entry in the Frame Relay Global X.121 Address Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfFrSwGlobalX121AddrEntry  

wfFrSwGlobalX121AddrDelete 1.3.6.1.4.1.18.3.5.9.6.14.1.1
Indication to delete/create this entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfFrSwGlobalX121AddrLow 1.3.6.1.4.1.18.3.5.9.6.14.1.2
Instance identifier; the low end of the X.121 address range. This is an 8-byte fixed length octet string format, right justified with padded leading zeros as necessary.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wfFrSwGlobalX121AddrHigh 1.3.6.1.4.1.18.3.5.9.6.14.1.3
Instance identifier; the high end of the X.121 address range. This is an 8-byte fixed length octet string format, right justified with padded leading zeros as necessary.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wfFrSwGlobalX121AddrIPAddr 1.3.6.1.4.1.18.3.5.9.6.14.1.4
This is the internal IP network address associated with this range of X.121 addresses.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

wfFrSwLocalE164AddrTable 1.3.6.1.4.1.18.3.5.9.6.15
wfFrSwLocalE164AddrTable contains E.164 addresses on the local BNX and CUG (Closed User Group) related information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfFrSwLocalE164AddrEntry

wfFrSwLocalE164AddrEntry 1.3.6.1.4.1.18.3.5.9.6.15.1
An entry in the Frame Relay Local E.164 Address Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfFrSwLocalE164AddrEntry  

wfFrSwLocalE164AddrDelete 1.3.6.1.4.1.18.3.5.9.6.15.1.1
Indication to delete/create this entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfFrSwLocalE164AddrCct 1.3.6.1.4.1.18.3.5.9.6.15.1.2
Instance identifier; internal CCT number associated with this E.164 address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwLocalE164Address 1.3.6.1.4.1.18.3.5.9.6.15.1.3
Instance identifier; an E.164 address. This is an 8-byte fixed length octet string format, right justified with padded leading zeros as necessary.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wfFrSwLocalE164AddrCUG 1.3.6.1.4.1.18.3.5.9.6.15.1.4
CUG (Closed User Group) information. The structure of the CUG information consists zero or more groups (number of groups can be derived from the OCTET STRING data type of this MIB attribute) of COI structure information. Each COI structure consists of a COI group number (4-byte integer) and a COI list. Each COI list consists of a length field (4-byte integer) which specifies the number of bytes of COI bit-encoded information belonging to this group and the COI information structure. COI information structure is a bit mask field where each bit from left to right represents whether this E.164 address belongs to a particular COI number within this COI group number. Please note that COI group numbers can not be repeated and that the COI group numbers must be in increasing order in the CUG configuration MIB wfFrSwLocalE164AddrCUG defaults to zero COI groups which means no CUG related information and hence this local wfFrSwLocalE164Address is allowed to communicate with all users.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wfFrSwLocalE164AddrLocalFlag 1.3.6.1.4.1.18.3.5.9.6.15.1.5
Local/Non-Local Identifier Flag. Used for SPVCs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER local(1), nonlocal(2)  

wfFrSwLocalX121AddrTable 1.3.6.1.4.1.18.3.5.9.6.16
wfFrSwLocalX121AddrTable contains X.121 addresses on the local BNX and CUG (Closed User Group) related information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfFrSwLocalX121AddrEntry

wfFrSwLocalX121AddrEntry 1.3.6.1.4.1.18.3.5.9.6.16.1
An entry in the Frame Relay Local X.121 Address Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfFrSwLocalX121AddrEntry  

wfFrSwLocalX121AddrDelete 1.3.6.1.4.1.18.3.5.9.6.16.1.1
Indication to delete/create this entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfFrSwLocalX121AddrCct 1.3.6.1.4.1.18.3.5.9.6.16.1.2
Instance identifier; internal CCT number associated with this X.121 address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwLocalX121Address 1.3.6.1.4.1.18.3.5.9.6.16.1.3
Instance identifier; a X.121 address. This is an 8-byte fixed length octet string format, right justified with padded leading zeros as necessary.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wfFrSwLocalX121AddrCUG 1.3.6.1.4.1.18.3.5.9.6.16.1.4
CUG (Closed User Group) information. The structure of the CUG information consists zero or more groups (number of groups can be derived from the OCTET STRING data type of this MIB attribute) of COI structure information. Each COI structure consists of a COI group number (4-byte integer) and a COI list. Each COI list consists of a length field (4-byte integer) which specifies the number of bytes of COI bit-encoded information belonging to this group and the COI information structure. COI information structure is a bit mask field where each bit from left to right represents whether this X.121 address belongs to a particular COI number within this COI group number. wfFrSwLocalX121AddrCUG defaults to zero COI groups which means no CUG related information and hence this local wfFrSwLocalX121Address is allowed to communicate with all users.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wfFrSwLocalX121AddrLocalFlag 1.3.6.1.4.1.18.3.5.9.6.16.1.5
Local/Non-Local Identifier Flag. Used for SPVCs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER local(1), nonlocal(2)  

wfFrSwBase 1.3.6.1.4.1.18.3.5.9.6.17
OBJECT IDENTIFIER    

wfFrSwBaseDelete 1.3.6.1.4.1.18.3.5.9.6.17.1
Indication to delete/create this base group
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfFrSwBaseIpAddr 1.3.6.1.4.1.18.3.5.9.6.17.2
Indicates this BNX's (circuit-less) IP address
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

wfFrSwBaseShutDown 1.3.6.1.4.1.18.3.5.9.6.17.3
Bit mask for slots to shutdown, slots 1-14. The MSBit represents slot 1, the next most significant bit represents slot 2, and so forth.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

wfFrSwCngcMonTable 1.3.6.1.4.1.18.3.5.9.6.18
This table is used by FRSW Congestion Control application. The table is used to Monitor the congestion level of a particular circuit.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfFrSwCngcMonEntry

wfFrSwCngcMonEntry 1.3.6.1.4.1.18.3.5.9.6.18.1
Instance Id for this table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfFrSwCngcMonEntry  

wfFrSwCngcMonReset 1.3.6.1.4.1.18.3.5.9.6.18.1.1
Indication to reset Cngc Monitor Counters.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrSwCngcMonCct 1.3.6.1.4.1.18.3.5.9.6.18.1.2
Circuit to be monitored.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwCngcMonP0Level1Percent 1.3.6.1.4.1.18.3.5.9.6.18.1.3
Percentage of time congestion is at level 1. for Priority 0 Traffic.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfFrSwCngcMonP0Level2Percent 1.3.6.1.4.1.18.3.5.9.6.18.1.4
Percentage of time congestion is at level 2. for Priority 0 Traffic.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfFrSwCngcMonP0Level3Percent 1.3.6.1.4.1.18.3.5.9.6.18.1.5
Percentage of time congestion is at level 3. for Priority 0 Traffic.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfFrSwCngcMonP0Level4Percent 1.3.6.1.4.1.18.3.5.9.6.18.1.6
Percentage of time congestion is at level 4. for Priority 0 Traffic.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfFrSwCngcMonP1Level1Percent 1.3.6.1.4.1.18.3.5.9.6.18.1.7
Percentage of time congestion is at level 1. for Priority 1 Traffic.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfFrSwCngcMonP1Level2Percent 1.3.6.1.4.1.18.3.5.9.6.18.1.8
Percentage of time congestion is at level 2. for Priority 1 Traffic.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfFrSwCngcMonP1Level3Percent 1.3.6.1.4.1.18.3.5.9.6.18.1.9
Percentage of time congestion is at level 3. for Priority 1 Traffic.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfFrSwCngcMonP1Level4Percent 1.3.6.1.4.1.18.3.5.9.6.18.1.10
Percentage of time congestion is at level 4. for Priority 1 Traffic.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfFrSwCngcMonP2Level1Percent 1.3.6.1.4.1.18.3.5.9.6.18.1.11
Percentage of time congestion is at level 1. for Priority 2 Traffic.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfFrSwCngcMonP2Level2Percent 1.3.6.1.4.1.18.3.5.9.6.18.1.12
Percentage of time congestion is at level 2. for Priority 2 Traffic.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfFrSwCngcMonP2Level3Percent 1.3.6.1.4.1.18.3.5.9.6.18.1.13
Percentage of time congestion is at level 3. for Priority 2 Traffic.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfFrSwCngcMonP2Level4Percent 1.3.6.1.4.1.18.3.5.9.6.18.1.14
Percentage of time congestion is at level 4. for Priority 2 Traffic.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfFrSwCngcMonP3Level1Percent 1.3.6.1.4.1.18.3.5.9.6.18.1.15
Percentage of time congestion is at level 1. for Priority 3 Traffic.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfFrSwCngcMonP3Level2Percent 1.3.6.1.4.1.18.3.5.9.6.18.1.16
Percentage of time congestion is at level 2. for Priority 3 Traffic.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfFrSwCngcMonP3Level3Percent 1.3.6.1.4.1.18.3.5.9.6.18.1.17
Percentage of time congestion is at level 3. for Priority 3 Traffic.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfFrSwCngcMonP3Level4Percent 1.3.6.1.4.1.18.3.5.9.6.18.1.18
Percentage of time congestion is at level 4. for Priority 3 Traffic.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfFrSwVirtualIntfTable 1.3.6.1.4.1.18.3.5.9.6.19
The table is used to create 'virtual' FRSW access lines.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfFrSwVirtualIntfEntry

wfFrSwVirtualIntfEntry 1.3.6.1.4.1.18.3.5.9.6.19.1
Instance Id for this table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfFrSwVirtualIntfEntry  

wfFrSwVirtualIntfDelete 1.3.6.1.4.1.18.3.5.9.6.19.1.1
Indication to delete this virtual interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfFrSwVirtualIntfSlot 1.3.6.1.4.1.18.3.5.9.6.19.1.2
Instance identifier; the slot number of this interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwVirtualIntfCct 1.3.6.1.4.1.18.3.5.9.6.19.1.3
Instance identifier; the circuit number of this interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwVirtualIntfLineNum 1.3.6.1.4.1.18.3.5.9.6.19.1.4
Line number for this virtual interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwExtFileSysTable 1.3.6.1.4.1.18.3.5.9.6.20
This table is used by FRSW to extend the file system to DRAM device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfFrSwExtFileSysEntry

wfFrSwExtFileSysEntry 1.3.6.1.4.1.18.3.5.9.6.20.1
Instance Id for this table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfFrSwExtFileSysEntry  

wfFrSwExtFileSysDelete 1.3.6.1.4.1.18.3.5.9.6.20.1.1
Indication to delete/create this entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfFrSwExtFileSysSlot 1.3.6.1.4.1.18.3.5.9.6.20.1.2
A unique value for each slot. Its value ranges between 1 and 14.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwExtFileSysSize 1.3.6.1.4.1.18.3.5.9.6.20.1.3
The memory size of the extended file system in byte unit. The value zero also means that extended file system is disabled. Non-zero value means enabled. Its suggested that the size is in multiple of 128k bytes. Some of the well-known memory sizes and their correspond decimal values are as followed: Mem size Decimal Value ^^^^^^^^ ^^^^^^^^^^^^^ 128K 131072 256K 262144 512K 524288 1M 1048576 2M 2097152 4M 4194304 8M 8388608
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrSwExtFileSysActualSize 1.3.6.1.4.1.18.3.5.9.6.20.1.4
The actual memory size the system allocated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSwExtFileSysState 1.3.6.1.4.1.18.3.5.9.6.20.1.5
The status of the extended file system. State up indicates that the requested memory size for the extended file system has been allocated successfully and the extended file system is in operational state. State fault indicates that the requested memory size for the extended file system has NOT been allocated successfully and the extended file system is NOT in operational state. One reason for entering the fault state is insufficient available memory. State init indicates that the system is in the initialization cycle. The extended file system is not operational. State notpresent reflects the size of zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), fault(2), init(3), notpresent(4)