Wellfleet-BGP-MIB

File: Wellfleet-BGP-MIB.mib (81943 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1212
Wellfleet-COMMON-MIB

Imported symbols

IpAddress Counter Gauge
DisplayString OBJECT-TYPE wfBgpGroup

Defined Types

WfBgpPeerEntry  
SEQUENCE    
  wfBgpPeerDelete INTEGER
  wfBgpPeerDisable INTEGER
  wfBgpPeerState INTEGER
  wfBgpPeerLocalAddr IpAddress
  wfBgpPeerLocalPort INTEGER
  wfBgpPeerRemoteAddr IpAddress
  wfBgpPeerRemotePort INTEGER
  wfBgpPeerMinVersion INTEGER
  wfBgpPeerMaxVersion INTEGER
  wfBgpPeerRemoteAs INTEGER
  wfBgpPeerExtAdvTimer INTEGER
  wfBgpPeerConnectRetry INTEGER
  wfBgpPeerCfgHoldtime INTEGER
  wfBgpPeerHoldtime INTEGER
  wfBgpPeerCfgKeepAlive INTEGER
  wfBgpPeerKeepAlive INTEGER
  wfBgpPeerPathAttrSwitch INTEGER
  wfBgpPeerIdentifier IpAddress
  wfBgpPeerConnState INTEGER
  wfBgpPeerNegotiatedVersion INTEGER
  wfBgpPeerInUpdates Counter
  wfBgpPeerOutUpdates Counter
  wfBgpPeerInTotalMessages Counter
  wfBgpPeerOutTotalMessages Counter
  wfBgpPeerLastError OCTET STRING
  wfBgpPeerTotalRoutes Counter
  wfBgpPeerFsmEstablishedTransitions Counter
  wfBgpPeerFsmEstablishedTime Gauge
  wfBgpPeerInUpdateElapsedTime Gauge
  wfBgpPeerMinASOriginationInterval INTEGER
  wfBgpPeerLocalAS INTEGER
  wfBgpPeerMaxUpdateSize INTEGER
  wfBgpPeerRouteEchoSwitch INTEGER
  wfBgpPeerDiscardDuplicateRouteSwitch INTEGER
  wfBgpPeerRSMode INTEGER
  wfBgpPeerRSIdentifier INTEGER
  wfBgpPeerCfgDelayGranularity INTEGER
  wfBgpPeerDelayGranularity INTEGER
  wfBgpPeerLastErrorSrc INTEGER
  wfBgpPeerNexthopSelf INTEGER
  wfBgpPeerASLoopDetect INTEGER
  wfBgpPeerBgpEcmpMethod INTEGER
  wfBgpPeerDampenedRoutes INTEGER
  wfBgpPeerTTL INTEGER
  wfBgpPeerTcpAuthentication INTEGER
  wfBgpPeerTcpMd5KeyStorage INTEGER
  wfBgpPeerTcpMd5Key OCTET STRING

WfBgpVirtualPeerEntry  
SEQUENCE    
  wfBgpVirtualPeerLocalAddr IpAddress
  wfBgpVirtualPeerRemoteAddr IpAddress
  wfBgpVirtualPeerIdentifier IpAddress
  wfBgpVirtualPeerInUpdates Counter
  wfBgpVirtualPeerTotalRoutes Counter
  wfBgpVirtualPeerInUpdateElapsedTime Gauge

WfBgpAsWeightEntry  
SEQUENCE    
  wfBgpAsWeightDelete INTEGER
  wfBgpAsWeightDisable INTEGER
  wfBgpAsWeightState INTEGER
  wfBgpAsWeightNumber INTEGER
  wfBgpAsWeightValue INTEGER
  wfBgpAsWeightValue2 INTEGER
  wfBgpAsWeightValue3 INTEGER
  wfBgpAsWeightValue4 INTEGER
  wfBgpAsWeightValue5 INTEGER
  wfBgpAsWeightValue6 INTEGER
  wfBgpAsWeightValue7 INTEGER
  wfBgpAsWeightValue8 INTEGER

WfBgp3PathAttrEntry  
SEQUENCE    
  wfBgp3PathAttrPeer IpAddress
  wfBgp3PathAttrDestNetwork IpAddress
  wfBgp3PathAttrOrigin INTEGER
  wfBgp3PathAttrASPath OCTET STRING
  wfBgp3PathAttrNextHop IpAddress
  wfBgp3PathAttrInterASMetric INTEGER
  wfBgp3PathAttrASPathWeight INTEGER
  wfBgp3PathAttrBgpPreference INTEGER
  wfBgp3PathAttrBest INTEGER

WfBgpPathAttrEntry  
SEQUENCE    
  wfBgpPathAttrIpAddrPrefix IpAddress
  wfBgpPathAttrIpAddrPrefixLen INTEGER
  wfBgpPathAttrPeer IpAddress
  wfBgpPathAttrOrigin INTEGER
  wfBgpPathAttrASPathSegment OCTET STRING
  wfBgpPathAttrNextHop IpAddress
  wfBgpPathAttrMultiExitDisc INTEGER
  wfBgpPathAttrLocalPref INTEGER
  wfBgpPathAttrAtomicAggregate INTEGER
  wfBgpPathAttrAggregatorAS INTEGER
  wfBgpPathAttrAggregatorAddr IpAddress
  wfBgpPathAttrCalcLocalPref INTEGER
  wfBgpPathAttrBest INTEGER
  wfBgpPathAttrUnknown OCTET STRING
  wfBgpPathAttrImporterID IpAddress
  wfBgpPathAttrClusterID OCTET STRING
  wfBgpPathAttrCommunity OCTET STRING
  wfBgpPathAttrCalcMED INTEGER

WfBgpDbgEntry  
SEQUENCE    
  wfBgpDbgCreate INTEGER
  wfBgpDbgLocAddr IpAddress
  wfBgpDbgRemoteAddr IpAddress
  wfBgpDbgMsgLevel INTEGER
  wfBgpDbgMsgTraceSwitch INTEGER
  wfBgpDbgLogCode INTEGER
  wfBgpDbgLogCodeDisable INTEGER
  wfBgpDbgCodes OCTET STRING
  wfBgpDbgBootCodes OCTET STRING

WfBgpPathAttributeEntry  
SEQUENCE    
  wfBgpPathAttributeIpAddrPrefix IpAddress
  wfBgpPathAttributeIpAddrPrefixLen INTEGER
  wfBgpPathAttributeImporterID IpAddress
  wfBgpPathAttributePeer IpAddress
  wfBgpPathAttributeOrigin INTEGER
  wfBgpPathAttributeASPathSegment OCTET STRING
  wfBgpPathAttributeNextHop IpAddress
  wfBgpPathAttributeMultiExitDisc INTEGER
  wfBgpPathAttributeLocalPref INTEGER
  wfBgpPathAttributeAtomicAggregate INTEGER
  wfBgpPathAttributeAggregatorAS INTEGER
  wfBgpPathAttributeAggregatorAddr IpAddress
  wfBgpPathAttributeCalcLocalPref INTEGER
  wfBgpPathAttributeBest INTEGER
  wfBgpPathAttributeUnknown OCTET STRING
  wfBgpPathAttributeClusterID OCTET STRING
  wfBgpPathAttributeCommunity OCTET STRING
  wfBgpPathAttributeCalcMED INTEGER
  wfBgpPathAttributeFlapPenalty INTEGER
  wfBgpPathAttributeFlapCount INTEGER
  wfBgpPathAttributeRouteDampened INTEGER

WfBgpRouteFlapDampeningEntry  
SEQUENCE    
  wfBgpRouteFlapDampeningDelete INTEGER
  wfBgpRouteFlapDampeningIndex INTEGER
  wfBgpRouteFlapDampeningName DisplayString
  wfBgpRouteFlapDampeningCutoffThreshold INTEGER
  wfBgpRouteFlapDampeningReuseThreshold INTEGER
  wfBgpRouteFlapDampeningReachableDecay INTEGER
  wfBgpRouteFlapDampeningUnreachableDecay INTEGER
  wfBgpRouteFlapDampeningMaxHoldDown INTEGER
  wfBgpRouteFlapDampeningMemoryLimit INTEGER

Defined Values

wfBgpGeneralGroup 1.3.6.1.4.1.18.3.5.3.2.5.1
OBJECT IDENTIFIER    

wfBgp 1.3.6.1.4.1.18.3.5.3.2.5.1.1
OBJECT IDENTIFIER    

wfBgp3Group 1.3.6.1.4.1.18.3.5.3.2.5.2
OBJECT IDENTIFIER    

wfBgp4Group 1.3.6.1.4.1.18.3.5.3.2.5.3
OBJECT IDENTIFIER    

wfBgpDelete 1.3.6.1.4.1.18.3.5.3.2.5.1.1.1
Create/Delete parameter for determining whether or not BGP is configured on this router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfBgpDisable 1.3.6.1.4.1.18.3.5.3.2.5.1.1.2
Enable/Disable parameter for determining whether or not to allow any versions of BGP to start up.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfBgpState 1.3.6.1.4.1.18.3.5.3.2.5.1.1.3
the administrative state of BGP
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), init(3), invalid(4), notpresent(5)  

wfBgpIdentifier 1.3.6.1.4.1.18.3.5.3.2.5.1.1.4
The BGP Identifier for this router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

wfBgpLocalAs 1.3.6.1.4.1.18.3.5.3.2.5.1.1.5
The Autonomous System (AS) that this router belongs to.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

wfBgpEbgpDebugSwitch 1.3.6.1.4.1.18.3.5.3.2.5.1.1.6
If this debug switch is enabled, BGP will not enforce the rule that requires each EBGP peer to be on a directly attached network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfBgpVersion 1.3.6.1.4.1.18.3.5.3.2.5.1.1.7
Vector of supported BGP protocol version numbers. Each peer negotiates the version from this vector. Versions are identified via the string of bits contained within this attribute. The first octet contains bits 0 to 7, the second octet contains bits 8 to 15, and so on, with the most significant bit referring to the lowest bit number in the octet (e.g., the MSB of the first octet refers to bit 0). If a bit, i, is present and set, then the version (i+1) of the BGP is supported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wfBgpIntraAsIbgpRouting 1.3.6.1.4.1.18.3.5.3.2.5.1.1.8
If this switch is enabled, BGP will perform Intra-AS IBGP routing.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfIbgpFromProtocols 1.3.6.1.4.1.18.3.5.3.2.5.1.1.9
if Intra-AS IBGP routing is enabled, this attribute spcifies if non-BGP external routes can be propogated via IBGP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER bgp(1), all(2)  

wfBgpIntAdvTimer 1.3.6.1.4.1.18.3.5.3.2.5.1.1.10
the minimum time interval, in seconds, between injections of EBGP routes into the IP routing table. default is 5. Can't be zero
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..2147483647  

wfBgpUsedRoutes 1.3.6.1.4.1.18.3.5.3.2.5.1.1.11
the number of received BGP routes that have been submitted for possible inclusion in the IP routing table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfBgpTotalRoutes 1.3.6.1.4.1.18.3.5.3.2.5.1.1.12
the total number of BGP routes currently maintained.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfBgpTotalPaths 1.3.6.1.4.1.18.3.5.3.2.5.1.1.13
the total number of BGP path attributes blocks currently maintained.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfBgpMaxRedundantIbgpRoutes 1.3.6.1.4.1.18.3.5.3.2.5.1.1.14
Specifies the maximum number of IBGP routes to the same destination to be stored. At this point at least one route is stored even if zero is specified. If set to BGP_MAX_REDUNDANT_RTS_MAXIMUM, no limit will be imposed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

wfBgpRouteRequestSwitch 1.3.6.1.4.1.18.3.5.3.2.5.1.1.15
If this switch is enabled and at least one connection to IBGP route server is enabled, alternate routes to a destination which became unreachable will be requested from the Route Server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfBgpConnCollisionDetect 1.3.6.1.4.1.18.3.5.3.2.5.1.1.16
If this switch is enabled, redundant BGP connections to the same router will be detected and disallowed, i.e. only one BGP connection to the same router will be maintained.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfBgpRsTopology 1.3.6.1.4.1.18.3.5.3.2.5.1.1.17
Specifies IBGP Route Server connection topology: none(Non-RS), RC, full-mesh, or tree. To enable Route Server mode full-mesh or tree topology must be selected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), client(2), mesh(3), tree(4)  

wfBgpClusterIdentifier 1.3.6.1.4.1.18.3.5.3.2.5.1.1.18
If RS Server, cluster Identifer for this server
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge 0..4294967295  

wfBgpDynamicPolChangeSupport 1.3.6.1.4.1.18.3.5.3.2.5.1.1.19
If this switch is enabled, when a BGP policy rule changes all affected routes are dynamically re-evaluated according to the new policy specification. If this switch is disabled, all bgp connections are restarted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfBgpSoloistSlots 1.3.6.1.4.1.18.3.5.3.2.5.1.1.20
Slot mask for which slots BGP is eligible to run on. The MSBit represents slot 1, the next most significant bit represents slot 2, and so on... Slots can be 1-14. Default is all slots on a BCN.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

wfBgpSoloistSlot 1.3.6.1.4.1.18.3.5.3.2.5.1.1.21
Slot on which BGP runs in Soloist mode. Slots can be 1-14. Zero means that BGP is not in a Soloist mode. Default is zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfBgpSubnetAggregation 1.3.6.1.4.1.18.3.5.3.2.5.1.1.22
If this switch is enabled, non-BGP originated subnet routes are aggregated to their corresponding natural network routes for advertisement to bgp peers. Advertisement of BGP originated routes is not affected by this switch.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfBgpBlackHoleSupport 1.3.6.1.4.1.18.3.5.3.2.5.1.1.23
If this switch is disabled BGP doesn't submit a 'black-hole' route into IP routing table for an aggregate route advertised to a BGP peer. For action 'drop' packet will be dropped and for 'reject' - 'ICMP Destination Unreachable' will be send back.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), drop(2), reject(3)  

wfBgpMedComparison 1.3.6.1.4.1.18.3.5.3.2.5.1.1.24
If this switch is disabled BGP, the Multi-Exit Discriminator (MED) route attribute is not considered in the route selection process.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfBgpIbgpReflection 1.3.6.1.4.1.18.3.5.3.2.5.1.1.25
Enables/Disables reflecting of BGP routes to IBGP peers.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfBgpIbgpEcmpMethod 1.3.6.1.4.1.18.3.5.3.2.5.1.1.26
Method to use IGP ECMP routing information for an IBGP peering. route-balance method distributes a set of destination networks that share the same IBGP Next Hop among available ECMP routes. Each IBGP network has one route submitted to IP RTM. traffic-balance uses all avaiable IGP ECMP routes. Each IBGP network submitted to IP RTM number of times equal to number IGP ECMP routes to IBGP Next Hop.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), route-balance(2), traffic-balance(3)  

wfBgpLocalPrefCalc 1.3.6.1.4.1.18.3.5.3.2.5.1.1.27
Enable/disable local_pref calculation
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfBgpConfedIdentifier 1.3.6.1.4.1.18.3.5.3.2.5.1.1.28
The BGP Confederation Identifier for this router. NIL means this AS is not a member of any confederation
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfBgpConfedPeers 1.3.6.1.4.1.18.3.5.3.2.5.1.1.29
Peer list of this BGP speaker to other member sub_ASs within the same confederation, NIL means no peer from this speaker to neighbor ASs that are members of this local confederation
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wfBgpIgpInterAction 1.3.6.1.4.1.18.3.5.3.2.5.1.1.30
Bit map for BGP/IGP interaction control: bit 15 bit 0 +---------------------------------------+ | | +---------------------------------------+ bit0: eBGP to OSPF bit1: eBGP to RIP bit2 - bit15: Reserved value 0 means no interaction
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..32767  

wfBgp3 1.3.6.1.4.1.18.3.5.3.2.5.2.1
OBJECT IDENTIFIER    

wfBgp3Delete 1.3.6.1.4.1.18.3.5.3.2.5.2.1.1
Create/Delete parameter for determining whether or not BGP3 is configured on this router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfBgp3Disable 1.3.6.1.4.1.18.3.5.3.2.5.2.1.2
Enable/Disable parameter for determining whether or not to start-up BGP3.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfBgp3State 1.3.6.1.4.1.18.3.5.3.2.5.2.1.3
the administrative state of BGP-3
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), init(3), invalid(4), notpresent(5)  

wfBgp3IntraAsIbgpRouting 1.3.6.1.4.1.18.3.5.3.2.5.2.1.4
If this switch is enabled, BGP-3 will perform Intra-AS IBGP routing.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfBgp3IntAdvTimer 1.3.6.1.4.1.18.3.5.3.2.5.2.1.5
the minimum time interval, in seconds, between injections of EBGP routes into the IP routing table. default is 5. can't be zero
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 1..2147483647  

wfBgp3RipRules 1.3.6.1.4.1.18.3.5.3.2.5.2.1.6
if enabled, IBGP routes that are also reachable via a RIP route will be consider 'reachable' and will be used. the use of this is highly discouraged.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfBgp3UsedRoutes 1.3.6.1.4.1.18.3.5.3.2.5.2.1.7
the number of received BGP-3 routes that have been submitted for possible inclusion in the IP routing table.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

wfBgp3TotalRoutes 1.3.6.1.4.1.18.3.5.3.2.5.2.1.8
the total number of BGP-3 routes currently maintained.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

wfBgp4 1.3.6.1.4.1.18.3.5.3.2.5.3.1
OBJECT IDENTIFIER    

wfBgp4Delete 1.3.6.1.4.1.18.3.5.3.2.5.3.1.1
Create/Delete parameter for determining whether or not BGP-4 is configured on this router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfBgp4Disable 1.3.6.1.4.1.18.3.5.3.2.5.3.1.2
Enable/Disable parameter for determining whether or not to start-up BGP-4.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfBgp4State 1.3.6.1.4.1.18.3.5.3.2.5.3.1.3
the administrative state of BGP-4
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), init(3), invalid(4), notpresent(5)  

wfBgpPeerTable 1.3.6.1.4.1.18.3.5.3.2.5.1.2
The BGP Peer table contains configuration and statistical information regarding this router's BGP peers
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfBgpPeerEntry

wfBgpPeerEntry 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1
An entry in the BGP-Peer table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfBgpPeerEntry  

wfBgpPeerDelete 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.1
Create/Delete: if set to delete, the peer connection is removed
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfBgpPeerDisable 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.2
Enable/Disable: controls whether the peer connection is enabled or disabled
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfBgpPeerState 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.3
the administrative state of the peer connection on this interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), init(3), invalid(4), notpresent(5)  

wfBgpPeerLocalAddr 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.4
the local interface address
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

wfBgpPeerLocalPort 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.5
the local TCP port number
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfBgpPeerRemoteAddr 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.6
the peer's interface address
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

wfBgpPeerRemotePort 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.7
the peer's TCP port number
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfBgpPeerMinVersion 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.8
the minimum BGP version number supported on this connection. Default is 4.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER bgp3(3), bgp4(4)  

wfBgpPeerMaxVersion 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.9
the maximum BGP version number supported on this connection Default is 4.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER bgp3(3), bgp4(4)  

wfBgpPeerRemoteAs 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.10
the configured peer's AS number. this must be filled in. the AS received in the open message must match this one.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfBgpPeerExtAdvTimer 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.11
Time interval in seconds for the MinRouteAdvertisementInterval BGP timer. Default is 30. Can't be zero
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..2147483647  

wfBgpPeerConnectRetry 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.12
the ConnectRetry timer, in seconds. this is the time between TCP connection attempts.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..2147483647  

wfBgpPeerCfgHoldtime 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.13
the configured Holdtime timer, in seconds. this is the maximum time that the peer can wait without receiving a KEEPALIVE from this speaker. if no hold timer is to be used (for an SVC), zero should be entered. otherwise, the value must be 3 or greater. this value is sent in the OPEN message. upon receipt of an OPEN, the received hold time is compared to this value. if both are zero, no hold timer will be run and periodic keepalives will not be sent. otherwise, the minimum of the two timers will be used. if this results in a hold timer of less than 3, 3 will be used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 3..2147483647  

wfBgpPeerHoldtime 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.14
the Holdtime timer value that was negotiated and is in use
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfBgpPeerCfgKeepAlive 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.15
the configured KeepAlive timer, in seconds. this is the interval between sending KEEPALIVE messages. if the hold timer was set to zero, this is ignored. otherwise, the KeepAlive timer will be set to the minimum of this value and 1/3 of the hold timer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..2147483647  

wfBgpPeerKeepAlive 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.16
the value used for the KeepAlive timer
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfBgpPeerPathAttrSwitch 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.17
controls whether the wfBgp3PathAttrTable (and the bgpRcvdPathAttrTable) will be maintained.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfBgpPeerIdentifier 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.18
the BGP ID of the Peer
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

wfBgpPeerConnState 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.19
the state of the BGP connection FSM
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), connect(2), active(3), opensent(4), openconfirm(5), established(6)  

wfBgpPeerNegotiatedVersion 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.20
the negotiated version of BGP running between the two peers
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfBgpPeerInUpdates 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.21
the number of BGP UPDATE messages received on this connection. This object should be initialized to zero when the connection is established.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfBgpPeerOutUpdates 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.22
the number of BGP UPDATE messages transmitted on this connection. This object should be initialized to zero when the connection is established.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfBgpPeerInTotalMessages 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.23
the total number of messages received from the remote peer on this connection. This object should be initialized to zero when the connection is established.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfBgpPeerOutTotalMessages 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.24
the total number of messages transmitted from the remote peer on this connection. This object should be initialized to zero when the connection is established.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfBgpPeerLastError 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.25
the last error code and subcode seen by this peer on this connection. If no error has occurred, this field is zero. Otherwise, the first byte of this two byte OCTET STRING contains the error code; the second contains the subcode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wfBgpPeerTotalRoutes 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.26
the total number of routes that were received from this peer that we are currently maintaining.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfBgpPeerFsmEstablishedTransitions 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.27
The total number of times the BGP FSM transitioned into the established state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfBgpPeerFsmEstablishedTime 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.28
This timer indicates how long (in seconds) this peer has been in the Established state or how long since this peer was last in the Established state. It is set to zero when a new peer is configured or the router is booted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfBgpPeerInUpdateElapsedTime 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.29
Elapsed time in seconds since the last BGP UPDATE message was received from the peer. Each time wfBgpPeerInUpdates is incremented, the value of this object is set to zero (0).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfBgpPeerMinASOriginationInterval 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.30
Time interval in seconds for the MinASOriginationInterval timer. The default value for this timer is 15 seconds. Can't be zero.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..2147483647  

wfBgpPeerLocalAS 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.31
If configured, specifies the AS Number that is sent in OPEN message to this peer. If zero, the AS Number specified with wfBgpLocalAS attribute is used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

wfBgpPeerMaxUpdateSize 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.32
Specifies the maximum size (in bytes) of UPDATE message that can be sent to this peer. Note that, if the message size that is needed to advertise a single route is greater than the configured maximum message size, the acctual message size can exceed the configured value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 64..4096  

wfBgpPeerRouteEchoSwitch 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.33
The switch controls route echoing. If enabled, a BGP route that is selected for forwarding is advertised back to the peer from which the route was received.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfBgpPeerDiscardDuplicateRouteSwitch 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.34
Indicates if duplicate routes with the identical path attributes should be discarded. Should be enabled only when peering with an IBGP Route Server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfBgpPeerRSMode 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.35
Indicates the Route Reflector / Route Server Mode of BGP peer: (1) - not a Route Server or Route Reflector connection; (2) - peer is a Route Server client; (3) - peer is a Route Server in the same RS cluster; (4) - peer is a Route Server in a different RS cluster; (5) - peer is a Route Reflector client; (6) - peer is a Route Reflector in the same RR cluster; (7) - peer is a Route Reflector in a different RR cluster.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), server-client(2), server-internal(3), server-external(4), reflector-client(5), reflector-internal(6), reflector-external(7)  

wfBgpPeerRSIdentifier 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.36
if wfBgpPeerRSMode is BGP_PEER_RS_MODE_INTERNAL or BGP_PEER_RS_MODE_RS_EXTERNAL, specifies the RS Identifier that is send in IDENTIFICATION message.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

wfBgpPeerCfgDelayGranularity 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.37
the configured delay granularity in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..2147483647  

wfBgpPeerDelayGranularity 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.38
the delay granularity in use
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfBgpPeerLastErrorSrc 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.39
The source of the last error notification received/sent \ ( 1 = recv / 2 = sent ). A null is present if no errors \ have occured.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..2  

wfBgpPeerNexthopSelf 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.40
Disable the use of third party advertisements
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfBgpPeerASLoopDetect 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.41
Designates whether the router will kill a peering \ session if a Loop is detected in the AS Path.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfBgpPeerBgpEcmpMethod 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.42
Defines a method to use IGP ECMP routing information. route-balance method distributes a set of destination networks that share the same BGP Next Hop among available ECMP routes. Each BGP network has one route submitted to IP RTM. traffic-balance uses all avaiable IGP ECMP routes. Each BGP network submitted to IP RTM number of times equal to number IGP ECMP routes to BGP Next Hop. This parameter is similar to wfBgpIbgpEcmpMethod but is applicable only to EBGP peer connections. IBGP peer connection selects ECMP method according to wfBgpIbgpEcmpMethod value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), route-balance(2), traffic-balance(3)  

wfBgpPeerDampenedRoutes 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.43
Number of routes from this peer that are suppressed due to flap dampening.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

wfBgpPeerTTL 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.44
Configurable Time-To-Live field to be used for this peer connection. Unless wfBgpEbgpDebugSwitch is set, a TTL of 1 is used for external BGP connections. A value of zero (default) indicate to use wfIpBaseDefaultTTL as the TTL value for this peer connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

wfBgpPeerTcpAuthentication 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.45
Indicates if BGP TCP Authentication is enabled\ none(1) - no authentication\ md5(2) - MD5 authentication enabled
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), md5(2)  

wfBgpPeerTcpMd5KeyStorage 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.46
Indicates how the wfBgpPeerTcpMd5Key is stored \ in the MIB and configuration file. \ clear-text(1) - the key is stored unencrypted \ encrypted(2) - the key is stored encrypted
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER clear-text(1), encrypted(2)  

wfBgpPeerTcpMd5Key 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.47
if nil, no key configured\ if not nil, BGP TCP MD5 authentication key stored in \ wfBgpPeerTcpMd5KeyStorage format
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wfBgpVirtualPeerTable 1.3.6.1.4.1.18.3.5.3.2.5.1.6
The BGP Virtual Peer table contains configuration and statistical information regarding this router's Virtual peers learned via the Route Server
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfBgpVirtualPeerEntry

wfBgpVirtualPeerEntry 1.3.6.1.4.1.18.3.5.3.2.5.1.6.1
An entry in the BGP-Virtual-Peer table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfBgpVirtualPeerEntry  

wfBgpVirtualPeerLocalAddr 1.3.6.1.4.1.18.3.5.3.2.5.1.6.1.1
the local interface address
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

wfBgpVirtualPeerRemoteAddr 1.3.6.1.4.1.18.3.5.3.2.5.1.6.1.2
the peer's interface address
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

wfBgpVirtualPeerIdentifier 1.3.6.1.4.1.18.3.5.3.2.5.1.6.1.3
the BGP ID of the Peer
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

wfBgpVirtualPeerInUpdates 1.3.6.1.4.1.18.3.5.3.2.5.1.6.1.4
the number of BGP UPDATE messages received on this connection. This object should be initialized to zero when the connection is established.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfBgpVirtualPeerTotalRoutes 1.3.6.1.4.1.18.3.5.3.2.5.1.6.1.5
the total number of routes that were received from this peer that we are currently maintaining.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfBgpVirtualPeerInUpdateElapsedTime 1.3.6.1.4.1.18.3.5.3.2.5.1.6.1.6
Elapsed time in seconds since the last BGP UPDATE message was received from the peer. Each time wfBgpVirtualPeerInUpdates is incremented, the value of this object is set to zero (0).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfBgpAsWeightTable 1.3.6.1.4.1.18.3.5.3.2.5.1.3
The BGP AS weight table contains weights for autonomous systems for use in best-route calculations
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfBgpAsWeightEntry

wfBgpAsWeightEntry 1.3.6.1.4.1.18.3.5.3.2.5.1.3.1
An entry in the BGP AS weight table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfBgpAsWeightEntry  

wfBgpAsWeightDelete 1.3.6.1.4.1.18.3.5.3.2.5.1.3.1.1
Create/Delete: if set to delete, the AS entry is removed from this table
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfBgpAsWeightDisable 1.3.6.1.4.1.18.3.5.3.2.5.1.3.1.2
Enable/Disable: controls whether the AS entry is enabled or disabled
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfBgpAsWeightState 1.3.6.1.4.1.18.3.5.3.2.5.1.3.1.3
the state of this AS weight entry
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), init(3), invalid(4), notpresent(5)  

wfBgpAsWeightNumber 1.3.6.1.4.1.18.3.5.3.2.5.1.3.1.4
the AS number
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

wfBgpAsWeightValue 1.3.6.1.4.1.18.3.5.3.2.5.1.3.1.5
the class-1 value to assign to this AS
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..15  

wfBgpAsWeightValue2 1.3.6.1.4.1.18.3.5.3.2.5.1.3.1.6
the class-2 value to assign to this AS
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER default2(8)  

wfBgpAsWeightValue3 1.3.6.1.4.1.18.3.5.3.2.5.1.3.1.7
the class-3 value to assign to this AS
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER default3(8)  

wfBgpAsWeightValue4 1.3.6.1.4.1.18.3.5.3.2.5.1.3.1.8
the class-4 value to assign to this AS
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER default4(8)  

wfBgpAsWeightValue5 1.3.6.1.4.1.18.3.5.3.2.5.1.3.1.9
the class-5 value to assign to this AS
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER default5(8)  

wfBgpAsWeightValue6 1.3.6.1.4.1.18.3.5.3.2.5.1.3.1.10
the class-6 value to assign to this AS
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER default6(8)  

wfBgpAsWeightValue7 1.3.6.1.4.1.18.3.5.3.2.5.1.3.1.11
the class-7 value to assign to this AS
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER default7(8)  

wfBgpAsWeightValue8 1.3.6.1.4.1.18.3.5.3.2.5.1.3.1.12
the class-8 value to assign to this AS
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER default8(8)  

wfBgp3PathAttrTable 1.3.6.1.4.1.18.3.5.3.2.5.2.2
The BGP3 received path attribute table contains information about paths to destination networks received by all peers. This table is deprecated and replaced with wfBgpPathAttrTable
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfBgp3PathAttrEntry

wfBgp3PathAttrEntry 1.3.6.1.4.1.18.3.5.3.2.5.2.2.1
An entry in the BGP-3 Path Attribute Table
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  WfBgp3PathAttrEntry  

wfBgp3PathAttrPeer 1.3.6.1.4.1.18.3.5.3.2.5.2.2.1.1
the BGP identifier of the peer where the path information was learned.
Status: obsolete Access: read-only
OBJECT-TYPE    
  IpAddress  

wfBgp3PathAttrDestNetwork 1.3.6.1.4.1.18.3.5.3.2.5.2.2.1.2
the address of the destination network.
Status: obsolete Access: read-only
OBJECT-TYPE    
  IpAddress  

wfBgp3PathAttrOrigin 1.3.6.1.4.1.18.3.5.3.2.5.2.2.1.3
the ultimate origin of the path information: igp (1) -- network is interior; egp (2) -- network learned via EGP; incomplete (3) -- undetermined.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER igp(1), egp(2), incomplete(3)  

wfBgp3PathAttrASPath 1.3.6.1.4.1.18.3.5.3.2.5.2.2.1.4
the set of ASes that must be traversed to reach the network. Each AS is represented as a pair of octets according to the following algorithm: first-byte-of-pair = ASNumber / 256; second-byte-of-pair = ASNumber & 255;
Status: obsolete Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wfBgp3PathAttrNextHop 1.3.6.1.4.1.18.3.5.3.2.5.2.2.1.5
the address of the border router that should be used as the next-hop for the destination network.
Status: obsolete Access: read-only
OBJECT-TYPE    
  IpAddress  

wfBgp3PathAttrInterASMetric 1.3.6.1.4.1.18.3.5.3.2.5.2.2.1.6
the optional inter-AS metric. if this attribute has not been provided for this route, the value for this object is 0.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

wfBgp3PathAttrASPathWeight 1.3.6.1.4.1.18.3.5.3.2.5.2.2.1.7
the calculated AS path weight
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

wfBgp3PathAttrBgpPreference 1.3.6.1.4.1.18.3.5.3.2.5.2.2.1.8
the preference that is used to calculate this route with other BGP routes to the same destination
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

wfBgp3PathAttrBest 1.3.6.1.4.1.18.3.5.3.2.5.2.2.1.9
an indication of whether or not this was chosen as the best route to the destination
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER false(1), true(2)  

wfBgpPathAttrTable 1.3.6.1.4.1.18.3.5.3.2.5.1.4
The BGP received path attribute table contains information about paths to destination networks received by all peers.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfBgpPathAttrEntry

wfBgpPathAttrEntry 1.3.6.1.4.1.18.3.5.3.2.5.1.4.1
An entry in the BGP Path Attribute Table
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  WfBgpPathAttrEntry  

wfBgpPathAttrIpAddrPrefix 1.3.6.1.4.1.18.3.5.3.2.5.1.4.1.1
the IP address of the destination (sub)network.
Status: obsolete Access: read-only
OBJECT-TYPE    
  IpAddress  

wfBgpPathAttrIpAddrPrefixLen 1.3.6.1.4.1.18.3.5.3.2.5.1.4.1.2
Length in bits of the IP address prefix in the destination (sub)network address.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

wfBgpPathAttrPeer 1.3.6.1.4.1.18.3.5.3.2.5.1.4.1.3
the IP address of the peer where the path information was learned.
Status: obsolete Access: read-only
OBJECT-TYPE    
  IpAddress  

wfBgpPathAttrOrigin 1.3.6.1.4.1.18.3.5.3.2.5.1.4.1.4
the ultimate origin of the path information: igp (1) -- network is interior; egp (2) -- network learned via EGP; incomplete (3) -- undetermined.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER igp(1), egp(2), incomplete(3)  

wfBgpPathAttrASPathSegment 1.3.6.1.4.1.18.3.5.3.2.5.1.4.1.5
The sequence of AS path segments. Each AS path segment is represented by a triple . The type is a 1-octet field which has two possible values: 1 AS_SET: unordered set of ASs a route in the UPDATE message has traversed 2 AS_SEQUENCE: ordered set of ASs a route in the UPDATE message has traversed. The length is a 1-octet field containing the number of ASs in the value field. The value field contains one or more AS numbers, each AS is represented in the octet string as a pair of octets according to the following algorithm: first-byte-of-pair = ASNumber / 256; second-byte-of-pair = ASNumber & 255;
Status: obsolete Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wfBgpPathAttrNextHop 1.3.6.1.4.1.18.3.5.3.2.5.1.4.1.6
the address of the border router that should be used as the next-hop for the destination network.
Status: obsolete Access: read-only
OBJECT-TYPE    
  IpAddress  

wfBgpPathAttrMultiExitDisc 1.3.6.1.4.1.18.3.5.3.2.5.1.4.1.7
The optional inter-AS metric. If this attribute has not been provided for this route, the value for this object is -1.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

wfBgpPathAttrLocalPref 1.3.6.1.4.1.18.3.5.3.2.5.1.4.1.8
the originating BGP speaker's degree of preference for advertised route (-1..2147483647); if this attribute has not been provided for this route, the value for this object is -1.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

wfBgpPathAttrAtomicAggregate 1.3.6.1.4.1.18.3.5.3.2.5.1.4.1.9
indicates whether or not the local system has selected a less specific route without selecting a more specific route
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER false(1), true(2)  

wfBgpPathAttrAggregatorAS 1.3.6.1.4.1.18.3.5.3.2.5.1.4.1.10
The AS number of the last BGP speaker that performed route aggregation. A value of zero (0) indicates the absence of this attribute.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

wfBgpPathAttrAggregatorAddr 1.3.6.1.4.1.18.3.5.3.2.5.1.4.1.11
The BGP ID of the last BGP speaker that performed route aggregation. A value of 0.0.0.0 indicates the absence of this attribute.
Status: obsolete Access: read-only
OBJECT-TYPE    
  IpAddress  

wfBgpPathAttrCalcLocalPref 1.3.6.1.4.1.18.3.5.3.2.5.1.4.1.12
The degree of preference calculated by the receiving BGP speaker for an advertised route (-1..2147483647). A value of -1 indicates the absence of this attribute
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

wfBgpPathAttrBest 1.3.6.1.4.1.18.3.5.3.2.5.1.4.1.13
an indication of whether or not this was chosen as the best bgp rout to the destination and whether or not it was chosen as a forwarding IP route
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER false(1), true(2), bestused(3), used(4)  

wfBgpPathAttrUnknown 1.3.6.1.4.1.18.3.5.3.2.5.1.4.1.14
One or more path attributes not understood by this BGP speaker. Size zero (0) indicates the absence of such attribute(s). Octets beyond the maximum size (255), if any, are not recorded by this object.
Status: obsolete Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wfBgpPathAttrImporterID 1.3.6.1.4.1.18.3.5.3.2.5.1.4.1.15
For RS, the BGP ID of the border router that imported this route
Status: obsolete Access: read-only
OBJECT-TYPE    
  IpAddress  

wfBgpPathAttrClusterID 1.3.6.1.4.1.18.3.5.3.2.5.1.4.1.16
For RS, the sequence of Cluter IDs of the Clusters. Size zero (0) indicates the absence of such attribute(s).
Status: obsolete Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wfBgpPathAttrCommunity 1.3.6.1.4.1.18.3.5.3.2.5.1.4.1.17
List of BGP communities. Each community is 4 bytes long. Size zero (0) indicates the absence of community attribute. Octets beyond the maximum size (255), if any, are not recorded by this object.
Status: obsolete Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wfBgpPathAttrCalcMED 1.3.6.1.4.1.18.3.5.3.2.5.1.4.1.18
The Multi Exit Disc. calculated by the receiving BGP speaker for an advertised route (-1...2G)
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

wfBgpDbgTable 1.3.6.1.4.1.18.3.5.3.2.5.1.5
BGP debug table contains objects that controls generation of BGP debug information
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfBgpDbgEntry

wfBgpDbgEntry 1.3.6.1.4.1.18.3.5.3.2.5.1.5.1
a table entry
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfBgpDbgEntry  

wfBgpDbgCreate 1.3.6.1.4.1.18.3.5.3.2.5.1.5.1.1
Create/Delete parameter. Default is created.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER create(1), delete(2)  

wfBgpDbgLocAddr 1.3.6.1.4.1.18.3.5.3.2.5.1.5.1.2
The peer's local address. If 0.0.0.0, debug attributes are applied to all peers to specified Remote Address or with specified BGP version
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

wfBgpDbgRemoteAddr 1.3.6.1.4.1.18.3.5.3.2.5.1.5.1.3
The peer's Remote Address . If 0.0.0.0, debug attrubutes are applied to all configured peers from specified Local Address; if 255.255.255.255, debug attrubutes are applied to BGP4 gate only.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

wfBgpDbgMsgLevel 1.3.6.1.4.1.18.3.5.3.2.5.1.5.1.4
BGP log messages level. To control certain level of log messages BGP_DBG_MSG_ALL 0x001f0000 - 2031616 BGP_DBG_MSG_DEBUG 0x00010000 - 65536 BGP_DBG_MSG_INFO 0x00020000 - 131072 BGP_DBG_MSG_WARNING 0x00040000 - 262144 BGP_DBG_MSG_FAULT 0x00080000 - 524288 BGP_DBG_MSG_TRACE 0x00100000 - 1048576
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER all(2031616), debug(65536), info(131072), warning(262144), fault(524288), trace(1048576)  

wfBgpDbgMsgTraceSwitch 1.3.6.1.4.1.18.3.5.3.2.5.1.5.1.5
controls whether BGP messages that are exchanged on this connection are dumped to the log. BGP_DBG_MSG_DUMP_REC_OPEN enables tracing of OPEN messages BGP_DBG_MSG_DUMP_REC_UPDATE - UPDATE messages BGP_DBG_MSG_DUMP_REC_NOTIFICATION - NOTIFICATION and BGP_DBG_MSG_DUMP_REC_KEEPALIVE - KEEPALIVE on logical OR basis BGP_DBG_MSG_DUMP_DISABLED 1 BGP_DBG_MSG_DUMP_REC_OPEN 0x10 - 16 BGP_DBG_MSG_DUMP_REC_UPDATE 0x20 - 32 BGP_DBG_MSG_DUMP_REC_NOTIFICATION 0x40 - 64 BGP_DBG_MSG_DUMP_REC_KEEPALIVE 0x80 - 128
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), open(16), update(32), notification(64), keepalive(128)  

wfBgpDbgLogCode 1.3.6.1.4.1.18.3.5.3.2.5.1.5.1.6
Indicates that a debug log message which corresponds to the value of this attributes should be or should be not sent to the log. Affects wfBgpDbgCodes only. In order to save combined list of messages you have to set wfBgpDbgBootCodes directly as copy of wfBgpDbgCodes
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfBgpDbgLogCodeDisable 1.3.6.1.4.1.18.3.5.3.2.5.1.5.1.7
Indicates that a debug log message defined in wfBgpDbgCode will be or will be not logged
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfBgpDbgCodes 1.3.6.1.4.1.18.3.5.3.2.5.1.5.1.8
Vector of enabled debug messages (to check only). Messages are identified via the string of bits contained within this attribute. The first octet contains bits 0 to 7, the second octet contains bits 8 to 15, and so on, with the most significant bit referring to the lowest bit number in the octet (e.g., the MSB of the first octet refers to bit 0). If a bit, i, is present and set, then the DEBUG log message with the code (i) is enabled.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wfBgpDbgBootCodes 1.3.6.1.4.1.18.3.5.3.2.5.1.5.1.9
User-defined vector of enabled debug messages at boot moment. Coded as instance above
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wfBgpPathAttributeTable 1.3.6.1.4.1.18.3.5.3.2.5.1.7
The BGP received path attribute table contains information about paths to destination networks received by all peers.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfBgpPathAttributeEntry

wfBgpPathAttributeEntry 1.3.6.1.4.1.18.3.5.3.2.5.1.7.1
An entry in the BGP Path Attribute Table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfBgpPathAttributeEntry  

wfBgpPathAttributeIpAddrPrefix 1.3.6.1.4.1.18.3.5.3.2.5.1.7.1.1
the IP address of the destination (sub)network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

wfBgpPathAttributeIpAddrPrefixLen 1.3.6.1.4.1.18.3.5.3.2.5.1.7.1.2
Length in bits of the IP address prefix in the destination (sub)network address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfBgpPathAttributeImporterID 1.3.6.1.4.1.18.3.5.3.2.5.1.7.1.3
For RS, the BGP ID of the border router that imported this route
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

wfBgpPathAttributePeer 1.3.6.1.4.1.18.3.5.3.2.5.1.7.1.4
the IP address of the peer where the path information was learned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

wfBgpPathAttributeOrigin 1.3.6.1.4.1.18.3.5.3.2.5.1.7.1.5
the ultimate origin of the path information: igp (1) -- network is interior; egp (2) -- network learned via EGP; incomplete (3) -- undetermined.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER igp(1), egp(2), incomplete(3)  

wfBgpPathAttributeASPathSegment 1.3.6.1.4.1.18.3.5.3.2.5.1.7.1.6
The sequence of AS path segments. Each AS path segment is represented by a triple . The type is a 1-octet field which has two possible values: 1 AS_SET: unordered set of ASs a route in the UPDATE message has traversed 2 AS_SEQUENCE: ordered set of ASs a route in the UPDATE message has traversed. The length is a 1-octet field containing the number of ASs in the value field. The value field contains one or more AS numbers, each AS is represented in the octet string as a pair of octets according to the following algorithm: first-byte-of-pair = ASNumber / 256; second-byte-of-pair = ASNumber & 255;
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wfBgpPathAttributeNextHop 1.3.6.1.4.1.18.3.5.3.2.5.1.7.1.7
the address of the border router that should be used as the next-hop for the destination network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

wfBgpPathAttributeMultiExitDisc 1.3.6.1.4.1.18.3.5.3.2.5.1.7.1.8
The optional inter-AS metric. If this attribute has not been provided for this route, the value for this object is -1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfBgpPathAttributeLocalPref 1.3.6.1.4.1.18.3.5.3.2.5.1.7.1.9
the originating BGP speaker's degree of preference for advertised route (-1..2147483647); if this attribute has not been provided for this route, the value for this object is -1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfBgpPathAttributeAtomicAggregate 1.3.6.1.4.1.18.3.5.3.2.5.1.7.1.10
indicates whether or not the local system has selected a less specific route without selecting a more specific route
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER false(1), true(2)  

wfBgpPathAttributeAggregatorAS 1.3.6.1.4.1.18.3.5.3.2.5.1.7.1.11
The AS number of the last BGP speaker that performed route aggregation. A value of zero (0) indicates the absence of this attribute.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfBgpPathAttributeAggregatorAddr 1.3.6.1.4.1.18.3.5.3.2.5.1.7.1.12
The BGP ID of the last BGP speaker that performed route aggregation. A value of 0.0.0.0 indicates the absence of this attribute.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

wfBgpPathAttributeCalcLocalPref 1.3.6.1.4.1.18.3.5.3.2.5.1.7.1.13
The degree of preference calculated by the receiving BGP speaker for an advertised route (-1..2147483647). A value of -1 indicates the absence of this attribute
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfBgpPathAttributeBest 1.3.6.1.4.1.18.3.5.3.2.5.1.7.1.14
an indication of whether or not this was chosen as the best bgp rout to the destination and whether or not it was chosen as a forwarding IP route
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER false(1), true(2), bestused(3), used(4)  

wfBgpPathAttributeUnknown 1.3.6.1.4.1.18.3.5.3.2.5.1.7.1.15
One or more path attributes not understood by this BGP speaker. Size zero (0) indicates the absence of such attribute(s). Octets beyond the maximum size (255), if any, are not recorded by this object.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wfBgpPathAttributeClusterID 1.3.6.1.4.1.18.3.5.3.2.5.1.7.1.16
For RS, the sequence of Cluter IDs of the Clusters. Size zero (0) indicates the absence of such attribute(s).
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wfBgpPathAttributeCommunity 1.3.6.1.4.1.18.3.5.3.2.5.1.7.1.17
List of BGP communities. Each community is 4 bytes long. Size zero (0) indicates the absence of community attribute. Octets beyond the maximum size (255), if any, are not recorded by this object.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wfBgpPathAttributeCalcMED 1.3.6.1.4.1.18.3.5.3.2.5.1.7.1.18
The Multi Exit Disc. calculated by the receiving BGP speaker for an advertised route (-1...2G)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfBgpPathAttributeFlapPenalty 1.3.6.1.4.1.18.3.5.3.2.5.1.7.1.19
Penalty value based on number of route flaps
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfBgpPathAttributeFlapCount 1.3.6.1.4.1.18.3.5.3.2.5.1.7.1.20
Number of times a route flapped since the last time the penaltywas reset to zero
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfBgpPathAttributeRouteDampened 1.3.6.1.4.1.18.3.5.3.2.5.1.7.1.21
Shows whether this route is currently suppressed from being announced
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER announced(1), suppressed(2)  

wfBgpRouteFlapDampeningTable 1.3.6.1.4.1.18.3.5.3.2.5.1.8
Table of wfBgpRouteFlapDampeningEntry
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfBgpRouteFlapDampeningEntry

wfBgpRouteFlapDampeningEntry 1.3.6.1.4.1.18.3.5.3.2.5.1.8.1
An entry in the Route Flap Dampening table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfBgpRouteFlapDampeningEntry  

wfBgpRouteFlapDampeningDelete 1.3.6.1.4.1.18.3.5.3.2.5.1.8.1.1
Create/Delete: if set to delete, the entry is removed
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfBgpRouteFlapDampeningIndex 1.3.6.1.4.1.18.3.5.3.2.5.1.8.1.2
Index number of this entry in wfBgpRouteFlapDampeningTable
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfBgpRouteFlapDampeningName 1.3.6.1.4.1.18.3.5.3.2.5.1.8.1.3
Name of this template
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wfBgpRouteFlapDampeningCutoffThreshold 1.3.6.1.4.1.18.3.5.3.2.5.1.8.1.4
Value of penalty over which a route is suppressed. Expressed in number of withdrawals
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..20000  

wfBgpRouteFlapDampeningReuseThreshold 1.3.6.1.4.1.18.3.5.3.2.5.1.8.1.5
Value of penalty below which a route is unsuppressed. Expressed in number of withdrawals
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..20000  

wfBgpRouteFlapDampeningReachableDecay 1.3.6.1.4.1.18.3.5.3.2.5.1.8.1.6
Duration in minutes after which the penalty value is reduced to half when the route is reachable. Default is 5 minutes
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..45  

wfBgpRouteFlapDampeningUnreachableDecay 1.3.6.1.4.1.18.3.5.3.2.5.1.8.1.7
Duration in minutes after which the penalty value is reduced to half when the route is unreachable. Default is 15 minutes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..45  

wfBgpRouteFlapDampeningMaxHoldDown 1.3.6.1.4.1.18.3.5.3.2.5.1.8.1.8
Maximum time a route remains suppressed. Expressed in number seconds. Default is 45 minutes
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..60  

wfBgpRouteFlapDampeningMemoryLimit 1.3.6.1.4.1.18.3.5.3.2.5.1.8.1.9
If the state of a route(reachable/unreachable) remains stable for this duration, the penalty is cleared and the route unsuppressed. Expressed in number of minutes. Default is 45 minutes
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..60  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor