WaveLAN-MIB

File: WaveLAN-MIB.mib (17155 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB

Imported symbols

enterprises Counter OBJECT-TYPE
DisplayString

Defined Types

WliNicEntry  
SEQUENCE    
  wliNicIndex INTEGER
  wliNicBusType INTEGER
  wliNicSlot INTEGER
  wliNicIrq INTEGER
  wliNicError Counter
  wliNicOutOfRxResource Counter

WliPhyEntry  
SEQUENCE    
  wliPhyIndex INTEGER
  wliPhyDsp INTEGER
  wliPhyFrequency INTEGER
  wliPhyNwid OCTET STRING Size(2)
  wliPhyRfSilenceLevel INTEGER
  wliPhyOwnNwid Counter
  wliPhyOtherNwid Counter
  wliPhyLowSnr Counter
  wliPhyGoodSnr Counter
  wliPhyExcellentSnr Counter

WliMacEntry  
SEQUENCE    
  wliMacIndex INTEGER
  wliMacAddressSelect INTEGER
  wliMacCaDefers Counter
  wliMacDeferredTransmissions Counter
  wliMacFCSErrors Counter
  wliMacFrameTooLongs Counter
  wliMacFrameTooShorts Counter
  wliMacDeferLimits Counter

WliDriverEntry  
SEQUENCE    
  wliDriverIndex INTEGER
  wliDriverName DisplayString
  wliDriverVersion DisplayString

WliEncEntry  
SEQUENCE    
  wliEncIndex INTEGER
  wliEncInstalled INTEGER
  wliEncSelect INTEGER
  wliEncKey OCTET STRING Size(8)

WliMcastDelayEntry  
SEQUENCE    
  wliMcastDelayIndex INTEGER
  wliMcastNumberOfAps INTEGER 0..10
  wliMcastApSequenceNumber INTEGER 1..10
  wliMcastRepeatCount INTEGER 0..10

Defined Values

att-2 1.3.6.1.4.1.74
OBJECT IDENTIFIER    

att-mgmt 1.3.6.1.4.1.74.2
OBJECT IDENTIFIER    

wavelan 1.3.6.1.4.1.74.2.21
OBJECT IDENTIFIER    

wavelanInterface 1.3.6.1.4.1.74.2.21.1
OBJECT IDENTIFIER    

wliNicTable 1.3.6.1.4.1.74.2.21.1.1
Network Interface Card information for a collection of WaveLAN interfaces attached to a particular system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WliNicEntry

wliNicEntry 1.3.6.1.4.1.74.2.21.1.1.1
Network Interface Card information for a particular WaveLAN interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WliNicEntry  

wliNicIndex 1.3.6.1.4.1.74.2.21.1.1.1.1
An index value that uniquely identifies a WaveLAN network interface this NIC information applies to. The interface associated with a particular value of this index is the same interface as identified by the same value of ifIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wliNicBusType 1.3.6.1.4.1.74.2.21.1.1.1.2
The bus-type supported by this NIC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER xtBus(1), isaBus(2), mcBus(3), pcmcia2Bus(4), wavepointBus(5)  

wliNicSlot 1.3.6.1.4.1.74.2.21.1.1.1.3
The I/O Base Address (ISA/AT) or Slot Number (MC) or Socket Number (PCMCIA) used by this NIC. For ISA/AT (and alike) Base Addresses, the following values are used: 1='0300'H, 2='0390'H, 3='03C0'H, 4='03E0'H
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..8  

wliNicIrq 1.3.6.1.4.1.74.2.21.1.1.1.4
The Interrupt Request Number (IRQ) used by this NIC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..15  

wliNicError 1.3.6.1.4.1.74.2.21.1.1.1.5
A counter for miscellaneous board errors. It indicates (intermittent) NIC hardware problems.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wliNicOutOfRxResource 1.3.6.1.4.1.74.2.21.1.1.1.6
A counter for the number of times the NIC is out of resources for the receiver, causing the receiver to be switched off temporarily.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wliPhyTable 1.3.6.1.4.1.74.2.21.1.2
PHY status information and control variables for a collection of WaveLAN interfaces attached to a particular system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WliPhyEntry

wliPhyEntry 1.3.6.1.4.1.74.2.21.1.2.1
PHY status information and control variables for a particular WaveLAN interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WliPhyEntry  

wliPhyIndex 1.3.6.1.4.1.74.2.21.1.2.1.1
An index value that uniquely identifies a WaveLAN network interface this PHY information applies to. The interface associated with a particular value of this index is the same interface as identified by the same value of ifIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wliPhyDsp 1.3.6.1.4.1.74.2.21.1.2.1.2
The Digital Signal Processor on the board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER icarus(1), daedalus(2)  

wliPhyFrequency 1.3.6.1.4.1.74.2.21.1.2.1.3
The mid-point of the frequency band this WaveLAN NIC operates in.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER f915Mhz(1), f2425Mhz(2), f2460Mhz(3), f2484Mhz(4), f2430Mhz(5), f2412Mhz(6), f2422Mhz(7), f2432Mhz(8), f2442Mhz(9), f2452Mhz(10), f2462Mhz(11)  

wliPhyNwid 1.3.6.1.4.1.74.2.21.1.2.1.4
The WaveLAN Network ID (NWID) this RF-modem is currently configured for.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(2)  

wliPhyRfSilenceLevel 1.3.6.1.4.1.74.2.21.1.2.1.5
The RF Silence Level as currently read from the RF modem.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..36  

wliPhyOwnNwid 1.3.6.1.4.1.74.2.21.1.2.1.6
Own NWID counter; the number of frames received with the configured NWID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wliPhyOtherNwid 1.3.6.1.4.1.74.2.21.1.2.1.7
Other NWID counter; the number of frames received with different NWID than configured.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wliPhyLowSnr 1.3.6.1.4.1.74.2.21.1.2.1.8
The number of times the Signal to Noise Ratio (sample) of a frame reception was low.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wliPhyGoodSnr 1.3.6.1.4.1.74.2.21.1.2.1.9
The number of times the Signal to Noise Ratio (sample) of a frame reception was good.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wliPhyExcellentSnr 1.3.6.1.4.1.74.2.21.1.2.1.10
The number of times the Signal to Noise Ratio (sample) of a frame reception was excellent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wliMacTable 1.3.6.1.4.1.74.2.21.1.3
MAC status information and control variables for a collection of WaveLAN interfaces attached to a particular system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WliMacEntry

wliMacEntry 1.3.6.1.4.1.74.2.21.1.3.1
MAC status information and control variables for a particular WaveLAN interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WliMacEntry  

wliMacIndex 1.3.6.1.4.1.74.2.21.1.3.1.1
An index value that uniquely identifies a WaveLAN network interface this MAC information applies to. The interface associated with a particular value of this index is the same interface as identified by the same value of ifIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wliMacAddressSelect 1.3.6.1.4.1.74.2.21.1.3.1.2
MAC Address type select.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER universal(1), local(2)  

wliMacCaDefers 1.3.6.1.4.1.74.2.21.1.3.1.3
CSMA/CA Defer counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wliMacDeferredTransmissions 1.3.6.1.4.1.74.2.21.1.3.1.4
A counter for the number of frames for which the transmission attempt is delayed because the medium is busy. (same as dot3StatsDeferredTransmissions)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wliMacFCSErrors 1.3.6.1.4.1.74.2.21.1.3.1.5
A counter for the number of frames received that do not pass the FCS check and/or that are not an integral number of octets in length. WaveLAN hardware does not distinguish between FCS errors and Alignment errors. (same as dot3StatsFCSErrors + dot3StatsAlignmentErrors)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wliMacFrameTooLongs 1.3.6.1.4.1.74.2.21.1.3.1.6
A counter for the number of frames received that exceed the maximum permitted frame size for the medium (1518 bytes). (same as dot3StatsFrameTooLongs)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wliMacFrameTooShorts 1.3.6.1.4.1.74.2.21.1.3.1.7
A counter for the number of frames received that are shorter than the minimum permitted frame size for the medium (64 bytes)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wliMacDeferLimits 1.3.6.1.4.1.74.2.21.1.3.1.8
The number of times a frame is not transmitted because the CSMA/CA defer limit is reached
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wliDriverTable 1.3.6.1.4.1.74.2.21.1.4
Driver information for a collection of WaveLAN interfaces attached to a particular system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WliDriverEntry

wliDriverEntry 1.3.6.1.4.1.74.2.21.1.4.1
Driver information for a particular WaveLAN interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WliDriverEntry  

wliDriverIndex 1.3.6.1.4.1.74.2.21.1.4.1.1
An index value that uniquely identifies a WaveLAN network interface this driver information applies to. The interface associated with a particular value of this index is the same interface as identified by the same value of ifIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wliDriverName 1.3.6.1.4.1.74.2.21.1.4.1.2
The name of the software driver for this WaveLAN network interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(7)  

wliDriverVersion 1.3.6.1.4.1.74.2.21.1.4.1.3
The version number of the software driver. A text string as 'mm.nn.pp', where mm = major release number nn = point release number pp = optional patch number
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

wliEncTable 1.3.6.1.4.1.74.2.21.1.5
Encryption status information and control variables for a collection of WaveLAN interfaces attached to a particular system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WliEncEntry

wliEncEntry 1.3.6.1.4.1.74.2.21.1.5.1
Encryption status information and control variables for a particular WaveLAN interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WliEncEntry  

wliEncIndex 1.3.6.1.4.1.74.2.21.1.5.1.1
An index value that uniquely identifies a WaveLAN network interface this encryption information applies to. The interface associated with a particular value of this index is the same interface as identified by the same value of ifIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wliEncInstalled 1.3.6.1.4.1.74.2.21.1.5.1.2
Which encryption option is installed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), des(2), aes(3)  

wliEncSelect 1.3.6.1.4.1.74.2.21.1.5.1.3
Whether encryption is enabled or disabled.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

wliEncKey 1.3.6.1.4.1.74.2.21.1.5.1.4
The encryption key.
Status: mandatory Access: write-only
OBJECT-TYPE    
  OCTET STRING Size(8)  

wliMcastDelayTable 1.3.6.1.4.1.74.2.21.1.6
Information about the Multicast Delay feature for a collection of WaveLAN interfaces attached to a particular system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WliMcastDelayEntry

wliMcastDelayEntry 1.3.6.1.4.1.74.2.21.1.6.1
Information about the Multicast Delay feature for a particular WaveLAN interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WliMcastDelayEntry  

wliMcastDelayIndex 1.3.6.1.4.1.74.2.21.1.6.1.1
An index value that uniquely identifies a WaveLAN network interface this Multicast Delay information applies to. The interface associated with a particular value of this index is the same interface as identified by the same value of wliIndex (and ifIndex).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wliMcastNumberOfAps 1.3.6.1.4.1.74.2.21.1.6.1.2
The total number of Access Points in the coverage area. Together with wliMcastApSequenceNumber this is used to determine the delays before and after the transmission of each multicast frame. This results in a transmission slot per Access Point per multicast frame. 0 means: no multicast delay specified (use default mechanism).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..10  

wliMcastApSequenceNumber 1.3.6.1.4.1.74.2.21.1.6.1.3
The sequence number of this Access Point in the coverage area. Together with wliMcastNumberOfAps this is used to determine the delays before and after the transmission of each multicast frame. This results in a transmission slot per Access Point per multicast frame.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..10  

wliMcastRepeatCount 1.3.6.1.4.1.74.2.21.1.6.1.4
The number of times a multicast frame transmission is to be repeated.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..10