WWP-VOICE-GATEWAY-MIB

File: WWP-VOICE-GATEWAY-MIB.mib (36305 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC WWP-SMI

Imported symbols

Unsigned32 Counter32 IpAddress
Integer32 OBJECT-TYPE MODULE-IDENTITY
NOTIFICATION-TYPE DisplayString TruthValue
TEXTUAL-CONVENTION wwpModules

Defined Types

WwpVoiceGatewayEndPointEntry  
SEQUENCE    
  wwpVoiceGatewayEndPointId Integer32
  wwpVoiceGatewayEndpoint OCTET STRING

WwpVoiceGatewaySipPhoneLineEntry  
SEQUENCE    
  wwpVoiceGatewaySipLineId Integer32
  wwpVoiceGatewaySipPhoneNumber OCTET STRING
  wwpVoiceGatewaySipUserName OCTET STRING
  wwpVoiceGatewaySipUserDisplayName OCTET STRING
  wwpVoiceGatewaySipUserPassword OCTET STRING
  wwpVoiceGatewaySipDialPlan OCTET STRING

WwpVoiceGatewaySipPhoneLineTimerEntry  
SEQUENCE    
  wwpVoiceGatewaySipTimerLineId Integer32
  wwpVoiceGatewaySipDialTimerLong Integer32

Defined Values

wwpVoiceGatewayMIB 1.3.6.1.4.1.6141.2.43
This MIB module degines the managed objects for WWP voice gateway.
MODULE-IDENTITY    

wwpVoiceGatewayMIBObjects 1.3.6.1.4.1.6141.2.43.1
OBJECT IDENTIFIER    

wwpVoiceGateway 1.3.6.1.4.1.6141.2.43.1.1
OBJECT IDENTIFIER    

wwpVoiceGatewayMGCP 1.3.6.1.4.1.6141.2.43.1.1.1
OBJECT IDENTIFIER    

wwpVoiceGatewayCountry 1.3.6.1.4.1.6141.2.43.1.1.2
OBJECT IDENTIFIER    

wwpVoiceGatewayCodec 1.3.6.1.4.1.6141.2.43.1.1.3
OBJECT IDENTIFIER    

wwpVoiceGatewayAudio 1.3.6.1.4.1.6141.2.43.1.1.4
OBJECT IDENTIFIER    

wwpVoiceGatewayStats 1.3.6.1.4.1.6141.2.43.1.1.5
OBJECT IDENTIFIER    

wwpVoiceReset 1.3.6.1.4.1.6141.2.43.1.1.6
OBJECT IDENTIFIER    

wwpVoiceSec 1.3.6.1.4.1.6141.2.43.1.1.7
OBJECT IDENTIFIER    

wwpVoiceGatewayConfigCallAgent 1.3.6.1.4.1.6141.2.43.1.1.8
OBJECT IDENTIFIER    

wwpVoiceGatewayConfigPots 1.3.6.1.4.1.6141.2.43.1.1.9
OBJECT IDENTIFIER    

wwpVoiceGatewayConfigFax 1.3.6.1.4.1.6141.2.43.1.1.10
OBJECT IDENTIFIER    

wwpVoiceGatewayConfigEndPoint 1.3.6.1.4.1.6141.2.43.1.1.11
OBJECT IDENTIFIER    

wwpVoiceGatewayConfigNotifEntityCache 1.3.6.1.4.1.6141.2.43.1.1.12
OBJECT IDENTIFIER    

wwpVoiceGatewayConfigJitterBuffer 1.3.6.1.4.1.6141.2.43.1.1.13
OBJECT IDENTIFIER    

wwpVoiceGatewayConfigJitterBufferMinPeriod 1.3.6.1.4.1.6141.2.43.1.1.14
OBJECT IDENTIFIER    

wwpVoiceGatewayConfigJitterBufferMaxPeriod 1.3.6.1.4.1.6141.2.43.1.1.15
OBJECT IDENTIFIER    

wwpVoiceGatewayConfigJitterBufferTargetPeriod 1.3.6.1.4.1.6141.2.43.1.1.16
OBJECT IDENTIFIER    

wwpVoiceGatewayConfigCodecOverride 1.3.6.1.4.1.6141.2.43.1.1.17
OBJECT IDENTIFIER    

wwpVoiceGatewayConfigTestServerConnection 1.3.6.1.4.1.6141.2.43.1.1.18
OBJECT IDENTIFIER    

wwpVoiceGatewayConfigLastServerResponseTime 1.3.6.1.4.1.6141.2.43.1.1.19
OBJECT IDENTIFIER    

wwpVoiceGatewaySIP 1.3.6.1.4.1.6141.2.43.1.1.20
OBJECT IDENTIFIER    

wwpVoiceGatewayConfigProtocolType 1.3.6.1.4.1.6141.2.43.1.1.21
OBJECT IDENTIFIER    

wwpVoiceGatewayConfigProtocolEnable 1.3.6.1.4.1.6141.2.43.1.1.22
OBJECT IDENTIFIER    

wwpVoiceGatewayMIBNotificationPrefix 1.3.6.1.4.1.6141.2.43.2
OBJECT IDENTIFIER    

wwpVoiceGatewayMIBNotifications 1.3.6.1.4.1.6141.2.43.2.0
OBJECT IDENTIFIER    

wwpVoiceGatewayMIBConformance 1.3.6.1.4.1.6141.2.43.3
OBJECT IDENTIFIER    

wwpVoiceGatewayMIBCompliances 1.3.6.1.4.1.6141.2.43.3.1
OBJECT IDENTIFIER    

wwpVoiceGatewayMIBGroups 1.3.6.1.4.1.6141.2.43.3.2
OBJECT IDENTIFIER    

wwpVoiceGatewayEndPointTable 1.3.6.1.4.1.6141.2.43.1.1.1.1
A table of the voice gateway endpoints.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpVoiceGatewayEndPointEntry

wwpVoiceGatewayEndPointEntry 1.3.6.1.4.1.6141.2.43.1.1.1.1.1
An entry of the voice gateway endpoint.
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpVoiceGatewayEndPointEntry  

wwpVoiceGatewayEndPointId 1.3.6.1.4.1.6141.2.43.1.1.1.1.1.1
Index for the the endpoint entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

wwpVoiceGatewayEndpoint 1.3.6.1.4.1.6141.2.43.1.1.1.1.1.2
The endpoint for the voice Gateway. This object should be set to a zero length string if the Management Station wish to use the Endpoint's IP Address as the Endpoint Domain Name. Endpoint identifiers have two parts: The domain name of the gateway that is managing the endpoint. A local name within the gateway. The local name is hierarchical, for example, the local name of circuit number 13 in a multiplexed trunk that is connected to the physical interface named XYZ would be named as XYZ/13.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

wwpVoiceGatewayCallAgentAddr 1.3.6.1.4.1.6141.2.43.1.1.1.2
This object is used to configure either the domain name or the IP address of the Call Agent in standard dot notation. The complete address of a default call agent is composed of IP address/Domain Name and UDP port. wwpVoiceGatewayCallAgentAddr specifies address of the Call Agent to which RSIP(RestartInProgress) message is sent whenever system starts up or line goes up. Call agent address may be an IP address or fully qualified domain name (FQDN). This object should be set to zero length string if the Management Stations wish to attempt to obtain the CA address from a DNS server (highest priority MGCP CA is chosen).
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

wwpVoiceGatewayCallAgentUDPPort 1.3.6.1.4.1.6141.2.43.1.1.1.3
This object is used to configure the UDP port of the Call Agent. The UDP port is used together with wwpVoiceGatewayCallAgentAddr to specify the destination address of the call agent to which RSIP message is sent when system starts up or line goes up.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1025..65535  

wwpVoiceGatewayCallAgentProtocol 1.3.6.1.4.1.6141.2.43.1.1.1.4
Setting this object to 'rfc2705' will enable support of RFC 2705 for this CallAgent (Only 'L' Event Package). Setting this object to 'ncs1.0' will enable support of PacketCable NCS 1.0 for the CallAgent. Setting this object to 'mgcp1Ncs1NoPackages' will enable support of Mgcp 1.0 Ncs 1.0 no event package for the CallAgent.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ncs1(1), rfc2705(2), mgcp1Ncs1NoPackages(3)  

wwpVoiceGatewaySupportMessagePiggybacking 1.3.6.1.4.1.6141.2.43.1.1.1.5
Setting this object to 'false' will disable message Piggybacking for this Voice Gateway.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

wwpVoiceGatewayRsipKeepAliveEnable 1.3.6.1.4.1.6141.2.43.1.1.1.6
Setting this object to 'enable' will configure the device to send periodic RSIP x-keepalive messages.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

wwpVoiceGatewayRsipKeepAliveInterval 1.3.6.1.4.1.6141.2.43.1.1.1.7
Configures the interval at which RSIP x-keepalive messages are transmitted
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 10..600  

wwpVoiceGatewayCountryCodes 1.3.6.1.4.1.6141.2.43.1.1.2.1
This object specifies the country for different tone and ring settings.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER usa(1), dubai(2), holland(3), newZealand(4), uk(5), sweden(6)  

wwpVoiceGatewayComplexCodec 1.3.6.1.4.1.6141.2.43.1.1.3.1
Setting this object to 'g711(0)' will only enable G711U and G711A Codec. If this object is set to 'g729(3)', then G729A and G729AB Codec will be used.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), g711(2), g723(3), g726(4), g729(5)  

wwpVoiceGatewaySilenceSuppression 1.3.6.1.4.1.6141.2.43.1.1.3.2
Setting this object to 'false' will disable the silence suppression for the complex codes specified by wwpVoiceGatewayComplexCodec.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

wwpVoiceGatewayEchoCancellation 1.3.6.1.4.1.6141.2.43.1.1.3.3
Setting this object to 'false' will disable the echo cancellation for the complex codes specified by wwpVoiceGatewayComplexCodec.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

wwpVoiceGatewayPacketizationMinPeriod 1.3.6.1.4.1.6141.2.43.1.1.3.4
Min packet time for the complex codes specified by wwpVoiceGatewayComplexCodec. FOR G723 the packet time is fixed to be 30ms.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

wwpVoiceGatewayPacketizationMaxPeriod 1.3.6.1.4.1.6141.2.43.1.1.3.5
Max packet time for the complex codes specified by wwpVoiceGatewayComplexCodec. FOR G723 the packet time is fixed to be 30ms.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

wwpVoiceGatewayPayloadType 1.3.6.1.4.1.6141.2.43.1.1.4.1
The Payload Format for the telephone events.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 94..127  

wwpVoiceGatewaySendEventsViaRFC2833 1.3.6.1.4.1.6141.2.43.1.1.4.2
Setting this object to 'true' will cause the voice gateway to send Telephone Events via RFC2833 signalling using wwpVoiceGatewayPayloadType.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

wwpVoiceGatewayDropVoicePktsDuringEvents 1.3.6.1.4.1.6141.2.43.1.1.4.3
Setting this object to 'true' will cause the voice gateway to drop voice packets during RFC2833 Telephone Event packets.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

wwpVoiceGatewaySquelchInbandDtmfAudio 1.3.6.1.4.1.6141.2.43.1.1.4.4
Setting this object to 'true' will cause the voice gateway to Squelch the Inband DTMF Audio.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

wwpVoiceGatewayPktsTx 1.3.6.1.4.1.6141.2.43.1.1.5.1
The total number of RTP data packets transmitted by the voice gateway since starting transmission on this connection.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpVoiceGatewayOctetsTx 1.3.6.1.4.1.6141.2.43.1.1.5.2
The total number of payload octets (i.e., not including header or padding) transmitted in RTP data packets by the voice gateway since starting transmission on this connection.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpVoiceGatewayPktsRx 1.3.6.1.4.1.6141.2.43.1.1.5.3
The total number of RTP data packets received by the voice gateway since starting reception on this connection.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpVoiceGatewayOctetsRx 1.3.6.1.4.1.6141.2.43.1.1.5.4
The total number of payload octets (i.e., not including header or padding) transmitted in RTP data packets by the voice gateway since starting transmission on this connection.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpVoiceGatewayPktsLost 1.3.6.1.4.1.6141.2.43.1.1.5.5
The total number of RTP data packets that have been lost since the beginning of reception. This number is defined to be the number of packets expected less the number of packets actually received, where the number of packets received includes any which are late or duplicates.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpVoiceGatewayIntervalJitter 1.3.6.1.4.1.6141.2.43.1.1.5.6
An estimate of the statistical variance of the RTP data packet interarrival time measured in milliseconds and expressed as an unsigned integer. The interarrival jitter J is defined to be the mean deviation (smoothed absolute value) of the difference D in packet spacing at the receiver compared to the sender for a pair of packets.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

wwpVoiceGatewayLatency 1.3.6.1.4.1.6141.2.43.1.1.5.7
An estimate of the network latency, expressed in milliseconds. This is the average value of the difference between the NTP timestamp indicated by the senders of the RTCP messages and the NTP timestamp of the receivers, measured when this messages are received.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

wwpVoiceGatewayResetStatCounters 1.3.6.1.4.1.6141.2.43.1.1.5.8
To reset voice statistic counters , this object should be set to 'reset'. A read on this object should return none(0).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), reset(1)  

wwpVoiceGatewayNumResets 1.3.6.1.4.1.6141.2.43.1.1.6.1
This object defines the number of times that the voice gateway has been restarted.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..2147483647  

wwpVoiceGatewayReset 1.3.6.1.4.1.6141.2.43.1.1.6.2
Writing one of the specified values to this field causes the specified type of reboot to occur. none is the value returned when this leaf is queried. writing this value to the leaf will have no effect. reset causes the voice gateway to restart using its current configuration. resetDefault will reset the voice gateway to factory defaults.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), reset(1), resetDefault(2)  

wwpVoiceAccess 1.3.6.1.4.1.6141.2.43.1.1.7.1
Setting this object to 'deny' will disable access to VMI from SMI when connected via Telnet or console.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER allow(1), deny(2)  

wwpMgmtAccess 1.3.6.1.4.1.6141.2.43.1.1.7.2
Setting this object to 'deny' will disable access to SMI from VMI when connected via Telnet or console.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER allow(1), deny(2)  

wwpVoiceCallAgentOtaModes 1.3.6.1.4.1.6141.2.43.1.1.8.1
Setting this object to 'ifOtaRecv' will configure the device to send OTA if and only if OTA is received from call Agent. Setting this object to 'sendOta' will configure the device to always send OTA sdp parameters.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ifOtaRecv(1), sendOta(2)  

wwpVoiceCallAgentEgressEvent 1.3.6.1.4.1.6141.2.43.1.1.8.2
Setting this object to 'sendIngressEgressNotif' will configure the device to send ingress and egress fax and modem tone notification. Setting this object to 'sendIngressNotif' will configure the device to send only ingress fax and modem tone notification.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER sendIngressEgressNotif(1), sendIngressNotif(2)  

wwpVoiceCallAgentPotsLine 1.3.6.1.4.1.6141.2.43.1.1.9.1
Setting this object to 'enable1PotLine' will configure the device to enable Line 1 only. Setting this object to 'enable2PotLine' will configure the device to enable 2 pots lines. Device 'may' require reboot to enable pot line changes.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable1PotLine(1), enable2PotLine(2)  

wwpVoiceAutonomousFaxState 1.3.6.1.4.1.6141.2.43.1.1.10.1
Setting this object to 'enable' will configure the device to enable autonomous fax behavior. Setting this object to 'disable' will configure the device to disable autonomous fax behavior.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wwpVoiceEndPointName 1.3.6.1.4.1.6141.2.43.1.1.11.1
Setting this object will control how a voip endpoint name will be determined. This object cannot be set to 'unknown'.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unknown(1), ip(2), mac(3), hostName(4), fqdn(5)  

wwpVoiceNotifEntCache 1.3.6.1.4.1.6141.2.43.1.1.12.1
Timeout in minutes for cached DNS lookups for MGCP RQNT Notified Entity field
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1440  

wwpVoiceJitterOptionState 1.3.6.1.4.1.6141.2.43.1.1.13.1
Setting this object to 'enable' will configure the jitter buffer to change to an adaptive jitter buffer size. Setting this object to 'disable' will configure the jitter buffer to use a fixed jitter buffer size.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

wwpVoiceJitterBufferMinPeriod 1.3.6.1.4.1.6141.2.43.1.1.14.1
Minimum Holding time. Setting this value will limit the jitter buffer from adapting below this value. The smallest period is fixed at 20ms.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

wwpVoiceJitterBufferMaxPeriod 1.3.6.1.4.1.6141.2.43.1.1.15.1
Maximum Holding time. Setting this value will limit the jitter buffer from adapting above this value. The largest period is fixed at 300ms.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

wwpVoiceJitterBufferTargetPeriod 1.3.6.1.4.1.6141.2.43.1.1.16.1
Target Holding time. Setting this value sets the initial jitter buffer size.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

wwpVoiceGatewayCodecOverride 1.3.6.1.4.1.6141.2.43.1.1.17.1
Selecting data codec override forces the default data codec to the specified value, overriding the standard default data codec which is tied to country code. 1 = force specification of G711 PCMU as default codec 2 = force specification of G711 PCMA as default codec
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER g711PCMU(1), g711PCMA(2)  

wwpVoiceGatewayTestServerConnection 1.3.6.1.4.1.6141.2.43.1.1.18.1
Writing one of the specified values to this field causes mesages to be sent to voice server to test connectivity
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0)  

wwpVoiceGatewayLastServerResponseTime 1.3.6.1.4.1.6141.2.43.1.1.19.1
Last server response timestamp. Used as part of testing voice server connectivity
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

wwpVoiceGatewaySipSessionTimeoutPeriod 1.3.6.1.4.1.6141.2.43.1.1.20.1
Configures session expiration time in seconds. Set value to 0 to disable
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..3600  

wwpVoiceGatewaySipRegisterTimeoutPeriod 1.3.6.1.4.1.6141.2.43.1.1.20.2
Configures registration expiration time in seconds. Used only when registrar is used. Set value to 0 to disable.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..3600  

wwpVoiceGatewaySipForceQuotesState 1.3.6.1.4.1.6141.2.43.1.1.20.3
Configuration to force display names to be embraced by double quotes.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

wwpVoiceGatewaySipPhoneLineTable 1.3.6.1.4.1.6141.2.43.1.1.20.4
SIP Pots Line table This table confures users for each POTs line
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpVoiceGatewaySipPhoneLineEntry

wwpVoiceGatewaySipPhoneLineEntry 1.3.6.1.4.1.6141.2.43.1.1.20.4.1
table of sip line configuration
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpVoiceGatewaySipPhoneLineEntry  

wwpVoiceGatewaySipLineId 1.3.6.1.4.1.6141.2.43.1.1.20.4.1.1
Pots port Id
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2  

wwpVoiceGatewaySipPhoneNumber 1.3.6.1.4.1.6141.2.43.1.1.20.4.1.2
Phone Number associated with this line.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..31)  

wwpVoiceGatewaySipUserName 1.3.6.1.4.1.6141.2.43.1.1.20.4.1.3
User Name associated with this line.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..31)  

wwpVoiceGatewaySipUserDisplayName 1.3.6.1.4.1.6141.2.43.1.1.20.4.1.4
User Display Name associated with this line.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..31)  

wwpVoiceGatewaySipUserPassword 1.3.6.1.4.1.6141.2.43.1.1.20.4.1.5
User Password associated with this line.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..31)  

wwpVoiceGatewaySipDialPlan 1.3.6.1.4.1.6141.2.43.1.1.20.4.1.6
Configuration for dial plan expression string. Note: subset of unix regular expressions supported.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

wwpVoiceGatewaySipPhoneLineTimerTable 1.3.6.1.4.1.6141.2.43.1.1.20.5
SIP Pots Line table This table configures users for each POTs line
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpVoiceGatewaySipPhoneLineTimerEntry

wwpVoiceGatewaySipPhoneLineTimerEntry 1.3.6.1.4.1.6141.2.43.1.1.20.5.1
Table of sip phone line configuration
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpVoiceGatewaySipPhoneLineTimerEntry  

wwpVoiceGatewaySipTimerLineId 1.3.6.1.4.1.6141.2.43.1.1.20.5.1.1
Pots port Id
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2  

wwpVoiceGatewaySipDialTimerLong 1.3.6.1.4.1.6141.2.43.1.1.20.5.1.2
Long Timeout for SIP dialing
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..10  

wwpVoiceGatewaySIPServers 1.3.6.1.4.1.6141.2.43.1.1.20.6
OBJECT IDENTIFIER    

wwpVoiceGatewaySIPProxyServers 1.3.6.1.4.1.6141.2.43.1.1.20.6.1
OBJECT IDENTIFIER    

wwpVoiceGatewaySIPRegistrarServers 1.3.6.1.4.1.6141.2.43.1.1.20.6.2
OBJECT IDENTIFIER    

wwpVoiceGatewaySIPLogServers 1.3.6.1.4.1.6141.2.43.1.1.20.6.3
OBJECT IDENTIFIER    

wwpVoiceGatewaySipProxyAddr 1.3.6.1.4.1.6141.2.43.1.1.20.6.1.1
The complete address of a default Proxy is composed of IP address/Domain Name and UDP port. wwpVoiceGatewayRegistrarAddr specifies address of the Proxy server to which SIP messages are sent. Proxy address may be an IP address or fully qualified domain name (FQDN).
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

wwpVoiceGatewaySipProxyPort 1.3.6.1.4.1.6141.2.43.1.1.20.6.1.2
This object is used to configure the UDP port of the SIP Proxy Server. The UDP port is used together with wwpVoiceGatewaySipProxyAddr to specify the destination address of the Proxy to which SIP messages are sent.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1025..65535  

wwpVoiceGatewaySipRegistrarAddr 1.3.6.1.4.1.6141.2.43.1.1.20.6.2.1
The complete address of a default Registrar is composed of IP address/Domain Name and UDP port. wwpVoiceGatewayRegistrarAddr specifies address of the Regsitrar to which SIP Registration messages are sent whenever system starts or line goes up. Registrar address may be an IP address or fully qualified domain name (FQDN).
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

wwpVoiceGatewaySipRegistrarPort 1.3.6.1.4.1.6141.2.43.1.1.20.6.2.2
This object is used to configure the UDP port of the SIP Registrar. The UDP port is used together with wwpVoiceGatewaySipRegistrarAddr to specify the destination addressto which SIP Registration messages are sent when system starts or line goes up.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1025..65535  

wwpVoiceGatewaySipSyslogAddr 1.3.6.1.4.1.6141.2.43.1.1.20.6.3.1
The complete address of a default SIP SysLog server is composed of IP address/Domain Name and UDP port. wwpVoiceGatewaySipSyslogAddr specifies address of the SIP SysLog server to which SIP Log messages are sent. SysLog server address may be an IP address or fully qualified domain name (FQDN).
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

wwpVoiceGatewaySipSyslogPort 1.3.6.1.4.1.6141.2.43.1.1.20.6.3.2
This object is used to configure the UDP port of the SIP Log Servert. The UDP port is used together with wwpVoiceGatewaySipSyslogAddr to specify the destination address to which SIP Log mesaages are sent when system starts or line goes up.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

wwpVoiceGatewaySipSyslogLogLevel 1.3.6.1.4.1.6141.2.43.1.1.20.6.3.3
This object is used to configure the log level or verbosity of the SIP messages
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..4  

wwpVoiceGatewaySIPPreferredCodec 1.3.6.1.4.1.6141.2.43.1.1.20.7
Configuration to set preferred codec.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER g711(1), g729(2)  

wwpVoiceGatewaySIPDtmfEventHandling 1.3.6.1.4.1.6141.2.43.1.1.20.8
Configuration for device to send DTMF digits via SIP INFO message or in RTP RFC2833 event message in addition to the audio tone in RTP stream. The default is always an audio tone sent in the RTP stream.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER audio(1), info(2), rfc2833(3)  

wwpVoiceGatewaySIPCallFeatures 1.3.6.1.4.1.6141.2.43.1.1.20.9
OBJECT IDENTIFIER    

wwpVoiceGatewayHookFlashEnable 1.3.6.1.4.1.6141.2.43.1.1.20.9.1
Setting this object to 'true' will configure the device to process hook flash events.. Setting this object to 'false' will configure the device to ignore hookflash events.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

wwpVoiceGatewayProtocolType 1.3.6.1.4.1.6141.2.43.1.1.21.1
Configuration to select VoIP protocol. Setting this value to 'mgcp' will allow the configuration the MGCP funtionality. Setting this value to 'sip' will allow the configuration the SIP funtionality
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER mgcp(1), sip(2)  

wwpVoiceGatewayProtocolEnable 1.3.6.1.4.1.6141.2.43.1.1.22.1
Configuration to enable VoIP protocol. Setting this value to 'enable' will cause VoIP stack to start at bootup
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue