WWP-LEOS-CFM-MIB

File: WWP-LEOS-CFM-MIB.mib (334111 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC RFC1213-MIB
WWP-SMI

Imported symbols

TimeTicks Integer32 Unsigned32
Gauge32 Counter32 Counter64
OBJECT-TYPE MODULE-IDENTITY NOTIFICATION-TYPE
DisplayString MacAddress TEXTUAL-CONVENTION
RowStatus TruthValue sysName
wwpModulesLeos

Defined Types

CfmMAID  
Binary data representing the md name and ma name.
TEXTUAL-CONVENTION    
  OCTET STRING Size(1..48)  

CfmDisplayString  
Represents the cfm display string.
TEXTUAL-CONVENTION    
  OCTET STRING Size(1..2)  

EthType  
Represents the ethernet type.
TEXTUAL-CONVENTION    
  OCTET STRING Size(1..2)  

SendState  
Represents the action for the row. Send (1): the message with the corresponding parameters is to be sent to the Target host Clear (2): Clears the counters of the particular entry Cancel (3)
TEXTUAL-CONVENTION    
  INTEGER send(1), clear(2), cancel(3), none(99)  

Dot1agCfmMaintDomainNameType  
A value that represents a type (and thereby the format) of a Dot1agCfmMaintDomainName. The value can be one of the following: ieeeReserved(0) Reserved for definition by IEEE 802.1 recommend to not use zero unless absolutely needed. none(1) No format specified, usually because there is not (yet) a Maintenance Domain Name. In this case, a zero length OCTET STRING for the Domain Name field is acceptable. dnsLikeName(2) Domain Name like string, globally unique text string derived from a DNS name. macAddrAndUint(3) MAC address + 2-octet (unsigned) integer. charString(4) RFC2579 DisplayString, except that the character codes 0-31 (decimal) are not used. ieeeReserved(xx) Reserved for definition by IEEE 802.1 xx values can be [5..31] and [64..255] ituReserved(xx) Reserved for definition by ITU-T Y.1731 xx values range from [32..63]
TEXTUAL-CONVENTION    
  INTEGER none(1), dnsLikeName(2), macAddressAndUint(3), charString(4)  

Dot1agCfmMaintDomainName  
Denotes a generic Maintenance Domain Name.
TEXTUAL-CONVENTION    
  OCTET STRING Size(1..43)  

Dot1agCfmMaintAssocNameType  
A value that represents a type (and thereby the format) of a Dot1agCfmMaintAssocName. The value can be one of the following: ieeeReserved(0) Reserved for definition by IEEE 802.1 recommend to not use zero unless absolutely needed. primaryVid(1) Primary VLAN ID. 12 bits represented in a 2-octet integer: - 4 least significant bits of the first byte contains the 4 most significant bits of the 12 bits primary VID - second byte contains the 8 least significant bits of the primary VID 0 1 2 3 4 5 6 7 8 +-+-+-+-+-+-+-+-+ |0 0 0 0| (MSB) | +-+-+-+-+-+-+-+-+ | VID LSB | +-+-+-+-+-+-+-+-+ charString(2) RFC2579 DisplayString, except that the character codes 0-31 (decimal) are not used. (1..45) octets unsignedInt16 (3) 2-octet integer/big endian rfc2865VpnId(4) RFC 2685 VPN ID 3 octet VPN authority Organizationally Unique Identifier followed by 4 octet VPN index identifying VPN according to the OUI: 0 1 2 3 4 5 6 7 8 +-+-+-+-+-+-+-+-+ | VPN OUI (MSB) | +-+-+-+-+-+-+-+-+ | VPN OUI | +-+-+-+-+-+-+-+-+ | VPN OUI (LSB) | +-+-+-+-+-+-+-+-+ |VPN Index (MSB)| +-+-+-+-+-+-+-+-+ | VPN Index | +-+-+-+-+-+-+-+-+ | VPN Index | +-+-+-+-+-+-+-+-+ |VPN Index (LSB)| +-+-+-+-+-+-+-+-+ ieeeReserved(xx) Reserved for definition by IEEE 802.1 xx values can be [5..31] and [64..255] ituReserved(xx) Reserved for definition by ITU-T Y.1731 xx values range from [32..63]
TEXTUAL-CONVENTION    
  INTEGER primaryVid(1), charString(2), unsignedInt16(3), rfc2865VpnId(4), iccBased(32)  

Dot1agCfmMaintAssocName  
Denotes a generic Maintenance Association Name. It is the part of the Maintenance Association Identifier which is unique within the Maintenance Domain Name and is appended to the Maintenance Domain Name to form the Maintenance Association Identifier (MAID).
TEXTUAL-CONVENTION    
  OCTET STRING Size(1..45)  

WwpLeosCfmGlobalFrameBudgetEntry  
SEQUENCE    
  wwpLeosCfmGlobalFrameBudgetSlotIndex Unsigned32
  wwpLeosCfmGlobalFrameBudgetValue Counter32

WwpLeosCfmServiceEntry  
SEQUENCE    
  wwpLeosCfmServiceIndex Unsigned32
  wwpLeosCfmServiceType INTEGER
  wwpLeosCfmServiceValue INTEGER
  wwpLeosCfmServiceAdminState INTEGER
  wwpLeosCfmServiceOperState INTEGER
  wwpLeosCfmServiceAlarmTime INTEGER
  wwpLeosCfmServiceCCMInterval INTEGER
  wwpLeosCfmServiceName DisplayString
  wwpLeosCfmServiceMdLevel INTEGER
  wwpLeosCfmServiceResetTime INTEGER
  wwpLeosCfmServiceLastFaultCCM CfmDisplayString
  wwpLeosCfmServiceRMEPFailureFlag TruthValue
  wwpLeosCfmServiceCCMErrorFlag TruthValue
  wwpLeosCfmServiceCrossConnectErrorFlag TruthValue
  wwpLeosCfmServiceNumMEP Counter32
  wwpLeosCfmServiceNumRemoteMEP Counter32
  wwpLeosCfmServiceNumActiveMEP Counter32
  wwpLeosCfmServiceStatus RowStatus
  wwpLeosCfmServiceNextMepId Unsigned32
  wwpLeosCfmServiceAlarmPriority Unsigned32
  wwpLeosCfmServiceNumCCMForFault Unsigned32
  wwpLeosCfmServiceDMMInterval INTEGER
  wwpLeosCfmServiceLMMInterval INTEGER
  wwpLeosCfmServiceCCMLossStatsState INTEGER
  wwpLeosCfmServiceCCMLossBucketInterval INTEGER
  wwpLeosCfmServiceRemoteMepDiscovery INTEGER
  wwpLeosCfmServiceTlvSenderIdType INTEGER
  wwpLeosCfmServiceRMEPHoldTime Unsigned32
  wwpLeosCfmServicePortStatusFlag TruthValue
  wwpLeosCfmServiceRDIFlag TruthValue
  wwpLeosCfmServiceInstabilityFlag TruthValue
  wwpLeosCfmServiceDefaultMEPType INTEGER
  wwpLeosCfmServiceMAID CfmMAID
  wwpLeosCfmServiceMdIndex Unsigned32
  wwpLeosCfmServiceMaintAssocNameType Dot1agCfmMaintAssocNameType
  wwpLeosCfmServiceMaintAssocName Dot1agCfmMaintAssocName
  wwpLeosCfmServiceCfmMAID CfmMAID
  wwpLeosCfmServiceCfmMdIndex Unsigned32
  wwpLeosCfmServiceCfmMaintAssocNameType Dot1agCfmMaintAssocNameType
  wwpLeosCfmServiceCfmMaintAssocName Dot1agCfmMaintAssocName
  wwpLeosCfmServiceCfmDefaultMEPType INTEGER
  wwpLeosCfmServiceY1731 TruthValue
  wwpLeosCfmServiceAccelerated TruthValue
  wwpLeosCfmServiceCCMTxState INTEGER
  wwpLeosCfmServiceRMEPAging TruthValue
  wwpLeosCfmServiceMulticastDa TruthValue
  wwpLeosCfmServiceChargedAgainstGlobalFrameBudget TruthValue
  wwpLeosCfmServiceCfmControlModuleFrameBudget Counter32

WwpLeosCfmServiceFrameBudgetEntry  
SEQUENCE    
  wwpLeosCfmSlotIndex INTEGER
  wwpLeosCfmServiceFrameBudgetSlot Counter32

WwpLeosCfmMipEntry  
SEQUENCE    
  wwpLeosCfmMipVid INTEGER
  wwpLeosCfmMipPort INTEGER
  wwpLeosCfmMipLevel INTEGER
  wwpLeosCfmMipStatus RowStatus

WwpLeosCfmLinkTraceMsgEntry  
SEQUENCE    
  wwpLeosCfmLinkTraceMsgPortId INTEGER
  wwpLeosCfmLinkTraceMsgTargetMEPID INTEGER
  wwpLeosCfmLinkTraceMsgTargetMacAddr MacAddress
  wwpLeosCfmLinkTraceMsgTTL INTEGER
  wwpLeosCfmLinkTraceMsgSequenceNumber Integer32
  wwpLeosCfmLinkTraceMsgRowStatus RowStatus
  wwpLeosCfmLinkTraceMsgPriority INTEGER
  wwpLeosCfmLinkTraceMsgServiceName DisplayString
  wwpLeosCfmLinkTraceMsgSubPortName DisplayString
  wwpLeosCfmLinkTraceMsgVsIndex Unsigned32
  wwpLeosCfmLinkTraceMsgTotalTxLtm Unsigned32
  wwpLeosCfmLinkTraceMsgTotalRxLtr Unsigned32

WwpLeosCfmLinkTraceMsgReplyEntry  
SEQUENCE    
  wwpLeosCfmLinkTraceMsgReplyTTL Integer32
  wwpLeosCfmLinkTraceMsgReplyTTLIndex Unsigned32
  wwpLeosCfmLinkTraceMsgReplySequenceNumber Integer32
  wwpLeosCfmLinkTraceMsgReplyMPMacAddr MacAddress
  wwpLeosCfmLinkTraceMsgReplyMEPID Integer32
  wwpLeosCfmLinkTraceMsgReplyTargetMacAddr MacAddress
  wwpLeosCfmLinkTraceMsgReplyRelayAction INTEGER
  wwpLeosCfmLinkTraceMsgReplyIngressPort INTEGER
  wwpLeosCfmLinkTraceMsgReplyIngressAction INTEGER
  wwpLeosCfmLinkTraceMsgReplyEgressPort INTEGER
  wwpLeosCfmLinkTraceMsgReplyEgressAction INTEGER
  wwpLeosCfmLinkTraceMsgReplyIngressPortStr DisplayString
  wwpLeosCfmLinkTraceMsgReplyEgressPortStr DisplayString
  wwpLeosCfmLinkTraceMsgReplyIngressMacAddr MacAddress
  wwpLeosCfmLinkTraceMsgReplyEgressMacAddr MacAddress

WwpLeosCfmLoopbackMsgEntry  
SEQUENCE    
  wwpLeosCfmLoopbackMsgPortId INTEGER
  wwpLeosCfmLoopbackMsgTargetMEPID Unsigned32
  wwpLeosCfmLoopbackMsgTargetMacAddr MacAddress
  wwpLeosCfmLoopbackMsgCount INTEGER
  wwpLeosCfmLoopbackMsgData DisplayString
  wwpLeosCfmLoopbackMsgPriority INTEGER
  wwpLeosCfmLoopbackMsgDefaultInterval INTEGER
  wwpLeosCfmLoopbackMsgDefaultTimeout INTEGER
  wwpLeosCfmLoopbackMsgRowStatus RowStatus

WwpLeosCfmMaintenanceDomainEntry  
SEQUENCE    
  wwpLeosCfmMaintenanceDomainIndex Unsigned32
  wwpLeosCfmMaintenanceDomainLevel INTEGER
  wwpLeosCfmMaintenanceDomainName DisplayString
  wwpLeosCfmMaintenanceDomainServiceCount Unsigned32
  wwpLeosCfmMaintenanceDomainMdFormat Dot1agCfmMaintDomainNameType
  wwpLeosCfmMaintenanceDomainMdName Dot1agCfmMaintDomainName
  wwpLeosCfmMaintenanceDomainStatus RowStatus

WwpLeosCfmMEPEntry  
SEQUENCE    
  wwpLeosCfmMEPPort INTEGER
  wwpLeosCfmMEPAdminState INTEGER
  wwpLeosCfmMEPOperState INTEGER
  wwpLeosCfmMEPDirection INTEGER
  wwpLeosCfmMEPCCMState INTEGER
  wwpLeosCfmMEPCCMPriority INTEGER
  wwpLeosCfmMEPLTMPriority INTEGER
  wwpLeosCfmMEPId Unsigned32
  wwpLeosCfmMEPMacAddr MacAddress
  wwpLeosCfmMEPNextLbmSeqNumber Counter32
  wwpLeosCfmMEPRxValidInOrderLoopbackReply Counter32
  wwpLeosCfmMEPRxValidOutOrderLoopbackReply Counter32
  wwpLeosCfmMEPNextLTMSeqNumber Counter32
  wwpLeosCfmMEPNumLoopbackRepliesTxmt Counter32
  wwpLeosCfmMEPNumLTMReceived Counter32
  wwpLeosCfmMEPNumLTMTxmt Counter32
  wwpLeosCfmMEPNumCCMTxmt Counter32
  wwpLeosCfmMEPRowStatus RowStatus
  wwpLeosCfmMEPNumDMMSent Counter32
  wwpLeosCfmMEPDMMDelay Counter32
  wwpLeosCfmMEPDMMJitter Counter32
  wwpLeosCfmMEPNumLMMSent Counter32
  wwpLeosCfmMEPLMMFrameLossNear Counter32
  wwpLeosCfmMEPLMMFrameLossFar Counter32
  wwpLeosCfmMEPNumLMRReceived Counter32
  wwpLeosCfmMEPNumDMRReceived Counter32
  wwpLeosCfmMEPDMMMinDelay Counter32
  wwpLeosCfmMEPDMMMaxDelay Counter32
  wwpLeosCfmMEPDMMMinJitter Counter32
  wwpLeosCfmMEPDMMMaxJitter Counter32
  wwpLeosCfmMEPServiceName DisplayString
  wwpLeosCfmMEPSubPortName DisplayString
  wwpLeosCfmMEPVsPbtName DisplayString
  wwpLeosCfmMEPLogicalPortName DisplayString
  wwpLeosCfmMEPSubPortIndex Unsigned32
  wwpLeosCfmMEPEncapsulation INTEGER
  wwpLeosCfmMEPLeadPortBayIndex Unsigned32
  wwpLeosCfmMEPLeadPortShelfIndex Unsigned32
  wwpLeosCfmMEPLeadPortModuleIndex Unsigned32
  wwpLeosCfmMEPPBTBvid Unsigned32
  wwpLeosCfmMEPPBTEtype Unsigned32
  wwpLeosCfmMEPNumLbmTxmt Counter32
  wwpLeosCfmMEPNumLbmReceived Counter32
  wwpLeosCfmMEPNumLoopbackRepliesReceived Counter32
  wwpLeosCfmMEPNumLTRepliesTxmt Counter32
  wwpLeosCfmMEPNumLTRepliesReceived Counter32
  wwpLeosCfmMEPNumUnexpectedLTRepliesReceived Counter32
  wwpLeosCfmMEPNumCCMReceived Counter32

WwpLeosCfmRemoteMEPEntry  
SEQUENCE    
  wwpLeosCfmRemoteMEPID Unsigned32
  wwpLeosCfmRemoteMEPAdminState INTEGER
  wwpLeosCfmRemoteMEPOperState INTEGER
  wwpLeosCfmRemoteMEPTime TimeTicks
  wwpLeosCfmRemoteMEPMacAddr MacAddress
  wwpLeosCfmRemoteMEPKLastMacStatus TruthValue
  wwpLeosCfmRemoteMEPFailureFlag TruthValue
  wwpLeosCfmRemoteMEPCCMErrorFlag TruthValue
  wwpLeosCfmRemoteMEPRDIErrorFlag TruthValue
  wwpLeosCfmRemoteMEPNumCCMRx Counter32
  wwpLeosCfmRemoteMEPNumDMMSent Counter32
  wwpLeosCfmRemoteMEPDelay Counter32
  wwpLeosCfmRemoteMEPJitter Counter32
  wwpLeosCfmRemoteMEPNumLMMSent Counter32
  wwpLeosCfmRemoteMEPFrameLossNear Counter32
  wwpLeosCfmRemoteMEPFrameLossFar Counter32
  wwpLeosCfmRemoteMEPNumLMRReceived Counter32
  wwpLeosCfmRemoteMEPNumCCMLost Counter32
  wwpLeosCfmRemoteMEPNumDMRReceived Counter32
  wwpLeosCfmRemoteMEPHoldState INTEGER
  wwpLeosCfmRemoteMEPCCMComment DisplayString
  wwpLeosCfmRemoteMEPBadSequence Counter32
  wwpLeosCfmRemoteMEPMinDelay Counter32
  wwpLeosCfmRemoteMEPMaxDelay Counter32
  wwpLeosCfmRemoteMEPMinJitter Counter32
  wwpLeosCfmRemoteMEPMaxJitter Counter32
  wwpLeosCfmRemoteMEPSubPortName DisplayString
  wwpLeosCfmRemoteMEPServiceName DisplayString
  wwpLeosCfmRemoteMEPBayIndex Unsigned32
  wwpLeosCfmRemoteMEPShelfIndex Unsigned32
  wwpLeosCfmRemoteMEPModuleIndex Unsigned32
  wwpLeosCfmRemoteMEPPreviousBayIndex Unsigned32
  wwpLeosCfmRemoteMEPPreviousShelfIndex Unsigned32
  wwpLeosCfmRemoteMEPPreviousModuleIndex Unsigned32
  wwpLeosCfmRemoteMEPLastPortStatus INTEGER
  wwpLeosCfmRemoteMEPLastInterfaceStatus INTEGER
  wwpLeosCfmRemoteMEPLastSeqNum Unsigned32
  wwpLeosCfmRemoteMEPCCMSeqErrors Unsigned32
  wwpLeosCfmRemoteMEPCCMLevel INTEGER
  wwpLeosCfmRemoteCfmMEPHoldState INTEGER
  wwpLeosCfmRemoteMEPServiceClear TruthValue
  wwpLeosCfmRemoteMEPServiceStatisticsClear TruthValue
  wwpLeosCfmRemoteMEPAccelerated TruthValue
  wwpLeosCfmRemoteMEPRowStatus RowStatus

WwpLeosCfmPortStackEntry  
SEQUENCE    
  wwpLeosCfmPortStackPort INTEGER
  wwpLeosCfmPortStackVid INTEGER
  wwpLeosCfmPortStackType INTEGER
  wwpLeosCfmPortStackLevel Unsigned32
  wwpLeosCfmPortStackMEPId INTEGER

WwpLeosCfmExtPortStackEntry  
SEQUENCE    
  wwpLeosCfmExtPortStackVid INTEGER
  wwpLeosCfmExtPortStackPort INTEGER
  wwpLeosCfmExtPortStackType INTEGER
  wwpLeosCfmExtPortStackLevel Unsigned32
  wwpLeosCfmExtPortStackMEPId INTEGER

WwpLeosCfmMipCCMDbEntry  
SEQUENCE    
  wwpLeosCfmMipCCMDbIndex Unsigned32
  wwpLeosCfmMipCCMDbVid Unsigned32
  wwpLeosCfmMipCCMDbMacAddr MacAddress
  wwpLeosCfmMaintenanceDomainIndex Unsigned32
  wwpLeosCfmMipCCMDbPort INTEGER
  wwpLeosCfmMipCCMDbMEPID INTEGER
  wwpLeosCfmMipCCMdbNumCCMRx Counter32
  wwpLeosCfmMipCCMDbTime TimeTicks
  wwpLeosCfmMipCCMDbLastMacStatus TruthValue
  wwpLeosCfmMipCCMDbRDIErrorFlag TruthValue

WwpLeosCfmServiceFaultEntry  
SEQUENCE    
  wwpLeosCfmServiceFaultTime TimeTicks
  wwpLeosCfmServiceFaultType INTEGER
  wwpLeosCfmServiceFaultDesc DisplayString
  wwpLeosCfmServiceFaultMep INTEGER
  wwpLeosCfmServiceVlan INTEGER
  wwpLeosCfmServiceVsPbtName DisplayString

WwpLeosCfmServiceStatisticsEntry  
SEQUENCE    
  wwpLeosCfmServiceRxTotalValidFrames Counter64
  wwpLeosCfmServiceRxTotalInvalidFrames Counter64
  wwpLeosCfmServiceInvalidMessageOverflow Counter64
  wwpLeosCfmServiceInvalidPortStatusTLV Counter64
  wwpLeosCfmServiceInvalidInterfaceStatusTLV Counter64
  wwpLeosCfmServiceInvalidSenderIDTLV Counter64
  wwpLeosCfmServiceTxTotalCCM Counter64
  wwpLeosCfmServiceTotalRxValidCCM Counter64
  wwpLeosCfmServiceTotalRxInSequenceCCM Counter64
  wwpLeosCfmServiceTotalRxNotInSequenceCCM Counter64
  wwpLeosCfmServiceTotalRxMDLevelXconCCM Counter64
  wwpLeosCfmServiceTotalRxMAIDXconCCM Counter64
  wwpLeosCfmServiceTotalRxMEPIDErrorCCM Counter64
  wwpLeosCfmServiceTotalRxCCMIntervalErrorCCM Counter64
  wwpLeosCfmServiceTotalRxInvalidCCM Counter64
  wwpLeosCfmServiceTotalTxLTM Counter64
  wwpLeosCfmServiceTotalTxLTR Counter64
  wwpLeosCfmServiceTotalRxValidLTR Counter64
  wwpLeosCfmServiceTotalRxUnexpectedLTR Counter64
  wwpLeosCfmServiceTotalRxInvalidLTR Counter64
  wwpLeosCfmServiceTotalRxInvalidRelayActionLTR Counter64
  wwpLeosCfmServiceTotalRxValidLTM Counter64
  wwpLeosCfmServiceTotalTxInvalidLTM Counter64
  wwpLeosCfmServiceTotalTxLBM Counter64
  wwpLeosCfmServiceTotalTxLBR Counter64
  wwpLeosCfmServiceTotalRxInorderLBR Counter64
  wwpLeosCfmServiceTotalRxOutOfOrderLBR Counter64
  wwpLeosCfmServiceTotalRxContentMismatchLBR Counter64
  wwpLeosCfmServiceTotalRxUnexpectedLBR Counter64
  wwpLeosCfmServiceTotalRxInvalidLBR Counter64
  wwpLeosCfmServiceTotalRxValidLBM Counter64
  wwpLeosCfmServiceTotalRxInvalidLBM Counter64
  wwpLeosCfmServiceTotalTxDMM Counter64
  wwpLeosCfmServiceTotalTxDMR Counter64
  wwpLeosCfmServiceTotalRxDMM Counter64
  wwpLeosCfmServiceTotalRxDMR Counter64
  wwpLeosCfmServiceTotalTxLMM Counter64
  wwpLeosCfmServiceTotalTxLMR Counter64
  wwpLeosCfmServiceTotalRxLMM Counter64
  wwpLeosCfmServiceTotalRxLMR Counter64
  wwpLeosCfmServiceStatsClear INTEGER

WwpLeosCfmDelayMsgEntry  
SEQUENCE    
  wwpLeosCfmDelayMsgPortId INTEGER
  wwpLeosCfmDelayMsgTargetMEPID Unsigned32
  wwpLeosCfmDelayMsgTargetMacAddr MacAddress
  wwpLeosCfmDelayMsgCount INTEGER
  wwpLeosCfmDelayMsgPriority INTEGER
  wwpLeosCfmDelayMsgRowStatus RowStatus
  wwpLeosCfmDelayMsgRepeat INTEGER
  wwpLeosCfmDelayMsgRepeatCount INTEGER
  wwpLeosCfmDelayMsgDelayThreshold INTEGER
  wwpLeosCfmDelayMsgJitterThreshold INTEGER
  wwpLeosCfmDelayMsgMaxDelayThreshold INTEGER
  wwpLeosCfmDelayMsgMaxJitterThreshold INTEGER

WwpLeosCfmFrameLossMsgEntry  
SEQUENCE    
  wwpLeosCfmFrameLossMsgPortId INTEGER
  wwpLeosCfmFrameLossMsgTargetMEPID Unsigned32
  wwpLeosCfmFrameLossMsgTargetMacAddr MacAddress
  wwpLeosCfmFrameLossMsgCount INTEGER
  wwpLeosCfmFrameLossMsgPriority INTEGER
  wwpLeosCfmFrameLossMsgRowStatus RowStatus
  wwpLeosCfmFrameLossMsgRepeat INTEGER
  wwpLeosCfmFrameLossMsgRepeatCount INTEGER
  wwpLeosCfmFrameLossMsgFlnThreshold INTEGER
  wwpLeosCfmFrameLossMsgFlfThreshold INTEGER

WwpLeosCfmRemoteMEPCCMLossEntry  
SEQUENCE    
  wwpLeosCfmRemoteMEPCCMLossNum Unsigned32
  wwpLeosCfmRemoteMEPCCMLossCount Gauge32

WwpLeosCfmExtLoopbackMsgEntry  
SEQUENCE    
  wwpLeosCfmExtLoopbackMsgLocalMEPID Unsigned32
  wwpLeosCfmExtLoopbackMsgTargetMEPID Unsigned32
  wwpLeosCfmExtLoopbackMsgTargetMacAddr MacAddress
  wwpLeosCfmExtLoopbackMsgCount INTEGER
  wwpLeosCfmExtLoopbackMsgData DisplayString
  wwpLeosCfmExtLoopbackMsgPriority INTEGER
  wwpLeosCfmExtLoopbackMsgAction SendState
  wwpLeosCfmExtLoopbackMsgInterval INTEGER
  wwpLeosCfmExtLoopbackMsgTimeout INTEGER
  wwpLeosCfmExtLoopbackMsgLoss INTEGER

WwpLeosCfmExtMEPEntry  
SEQUENCE    
  wwpLeosCfmExtMEPId Unsigned32
  wwpLeosCfmExtPortId INTEGER
  wwpLeosCfmExtVlanId INTEGER
  wwpLeosCfmExtMEPAdminState INTEGER
  wwpLeosCfmExtMEPOperState INTEGER
  wwpLeosCfmExtMEPDirection INTEGER
  wwpLeosCfmExtMEPCCMState INTEGER
  wwpLeosCfmExtMEPCCMPriority INTEGER
  wwpLeosCfmExtMEPLTMPriority INTEGER
  wwpLeosCfmExtMEPMacAddr MacAddress
  wwpLeosCfmExtMEPNextLbmSeqNumber Counter32
  wwpLeosCfmExtMEPNextLTMSeqNumber Counter32
  wwpLeosCfmExtMEPRowStatus RowStatus
  wwpLeosCfmExtMEPDMMDelay Counter32
  wwpLeosCfmExtMEPDMMJitter Counter32
  wwpLeosCfmExtMEPLMMFrameLossNear Counter32
  wwpLeosCfmExtMEPLMMFrameLossFar Counter32
  wwpLeosCfmExtMEPServiceName DisplayString
  wwpLeosCfmExtMEPInterfaceName DisplayString
  wwpLeosCfmExtMEPServiceInstanceName DisplayString
  wwpLeosCfmExtMEPLogicalPortName DisplayString
  wwpLeosCfmExtMEPTagMode INTEGER
  wwpLeosCfmExtMEPTagVID INTEGER
  wwpLeosCfmExtMEPTagPriority INTEGER
  wwpLeosCfmExtMEPLMMBadSequence Counter32
  wwpLeosCfmExtMEPCCMComment DisplayString
  wwpLeosCfmExtMEPLMMMissingSequence Counter32
  wwpLeosCfmExtMEPBlockOppositeFaultCurrent Counter32
  wwpLeosCfmExtMEPBlockOppositeFaultThreshold Unsigned32
  wwpLeosCfmExtMEPBlockOppositeFaultTime INTEGER
  wwpLeosCfmExtMEPDMMMinDelay Counter32
  wwpLeosCfmExtMEPDMMMaxDelay Counter32
  wwpLeosCfmExtMEPDMMMinJitter Counter32
  wwpLeosCfmExtMEPDMMMaxJitter Counter32
  wwpLeosCfmExtMEPAccelerated TruthValue

WwpLeosCfmExtMEPStatsEntry  
SEQUENCE    
  wwpLeosCfmExtMEPStatsTotalValidFramesReceived Counter64
  wwpLeosCfmExtMEPStatsTotalInvalidFramesReceived Counter64
  wwpLeosCfmExtMEPStatsTotalInvalidMessageOverflowReceived Counter64
  wwpLeosCfmExtMEPStatsInvalidPortStatusTLVReceived Counter64
  wwpLeosCfmExtMEPStatsInvalidInterfaceStatusTLVReceived Counter64
  wwpLeosCfmExtMEPStatsInvalidSenderIDTLVReceived Counter64
  wwpLeosCfmExtMEPStatsCCMTxmt Counter64
  wwpLeosCfmExtMEPStatsValidCCMReceived Counter64
  wwpLeosCfmExtMEPStatsCCMInSequenceReceived Counter64
  wwpLeosCfmExtMEPStatsCCMSequenceErrorsReceived Counter64
  wwpLeosCfmExtMEPStatsMDLevelXconCCMReceived Counter64
  wwpLeosCfmExtMEPStatsMAIDXconCCMReceived Counter64
  wwpLeosCfmExtMEPStatsIntervalErrorCCMReceived Counter64
  wwpLeosCfmExtMEPStatsRxInvalidCCM Counter64
  wwpLeosCfmExtMEPStatsLBMTxmt Counter64
  wwpLeosCfmExtMEPStatsLBRTxmt Counter64
  wwpLeosCfmExtMEPStatsInOrderLBRReceived Counter64
  wwpLeosCfmExtMEPStatsOutOfOrderLBRReceived Counter64
  wwpLeosCfmExtMEPStatsContentMismatchLBRReceived Counter64
  wwpLeosCfmExtMEPStatsUnexpectedLBRReceived Counter64
  wwpLeosCfmExtMEPStatsInvalidLBRReceived Counter64
  wwpLeosCfmExtMEPStatsLTMTxmt Counter64
  wwpLeosCfmExtMEPStatsValidLTMReceived Counter64
  wwpLeosCfmExtMEPStatsTotalInvalidLTMReceived Counter64
  wwpLeosCfmExtMEPStatsInvalidLTRAction Counter64
  wwpLeosCfmExtMEPStatsLTRTxmt Counter64
  wwpLeosCfmExtMEPStatsLTRReceived Counter64
  wwpLeosCfmExtMEPStatsDMMTxmt Counter64
  wwpLeosCfmExtMEPStatsDMMReceived Counter64
  wwpLeosCfmExtMEPStatsDMRTxmt Counter64
  wwpLeosCfmExtMEPStatsDMRReceived Counter64
  wwpLeosCfmExtMEPStatsDMReplyTimeout Counter64
  wwpLeosCfmExtMEPStatsLMMTxmt Counter64
  wwpLeosCfmExtMEPStatsLMMReceived Counter64
  wwpLeosCfmExtMEPStatsLMRTxmt Counter64
  wwpLeosCfmExtMEPStatsLMRReceived Counter64
  wwpLeosCfmExtMEPStatsLMRTimeout Counter64
  wwpLeosCfmExtMEPStatsMepIdErrorCCMReceived Counter64
  wwpLeosCfmExtMEPStatsClear INTEGER
  wwpLeosCfmExtMEPStatsValidLBMReceived Counter64
  wwpLeosCfmExtMEPStatsInvalidLBMReceived Counter64
  wwpLeosCfmExtMEPStatsUnexpectedLTRReceived Counter64
  wwpLeosCfmExtMEPStatsInvalidDMMReceived Counter64
  wwpLeosCfmExtMEPStatsInvalidDMRReceived Counter64
  wwpLeosCfmExtMEPStatsUnexpectedDMRReceived Counter64
  wwpLeosCfmExtMEPStatsInvalidLMMReceived Counter64
  wwpLeosCfmExtMEPStatsInvalidLMRReceived Counter64
  wwpLeosCfmExtMEPStatsInvalidBlockedOppositeMep Counter64

WwpLeosCfmExtMEPLastStatsEntry  
SEQUENCE    
  wwpLeosCfmExtMEPLastStatsPriority Counter64
  wwpLeosCfmExtMEPLastStatsLBMCount Counter64
  wwpLeosCfmExtMEPLastStatsLBMSent Counter64
  wwpLeosCfmExtMEPLastStatsLBMToSend Counter64
  wwpLeosCfmExtMEPLastStatsInOrderLBRReceived Counter64
  wwpLeosCfmExtMEPLastStatsOutOfOrderLBRReceived Counter64
  wwpLeosCfmExtMEPLastStatsDMMPriority Counter64
  wwpLeosCfmExtMEPLastStatsDMMTxmt Counter64
  wwpLeosCfmExtMEPLastStatsDMMReceived Counter64
  wwpLeosCfmExtMEPLastStatsDMMDelay Counter64
  wwpLeosCfmExtMEPLastStatsDMMJitter Counter64
  wwpLeosCfmExtMEPLastStatsLMMPriority Counter64
  wwpLeosCfmExtMEPLastStatsLMMTxtm Counter64
  wwpLeosCfmExtMEPLastStatsLMMReceived Counter64
  wwpLeosCfmExtMEPLastStatsFrameLossNear Counter64
  wwpLeosCfmExtMEPLastStatsFrameLossFar Counter64
  wwpLeosCfmExtMEPLastStatsLTMPriority Counter64
  wwpLeosCfmExtMEPLastStatsLTMSequenceNo Counter64
  wwpLeosCfmExtMEPLastStatsLTMInitialTTL Counter64
  wwpLeosCfmExtMEPLastStatsFrameLossBadSequence Counter64
  wwpLeosCfmExtMEPLastStatsDMMMinDelay Counter64
  wwpLeosCfmExtMEPLastStatsDMMMaxDelay Counter64
  wwpLeosCfmExtMEPLastStatsDMMMinJitter Counter64
  wwpLeosCfmExtMEPLastStatsDMMMaxJitter Counter64

WwpLeosCfmExtMEPDelayHistoryEntry  
SEQUENCE    
  wwpLeosCfmExtMEPDelayHistoryIndex INTEGER
  wwpLeosCfmExtMEPDelayHistoryStatus INTEGER
  wwpLeosCfmExtMEPDelayHistoryInterval INTEGER
  wwpLeosCfmExtMEPDelayHistoryPriority INTEGER
  wwpLeosCfmExtMEPDelayHistoryMEPId Unsigned32
  wwpLeosCfmExtMEPDelayHistoryNumDMMSent Unsigned32
  wwpLeosCfmExtMEPDelayHistoryNumDMRReceived Unsigned32
  wwpLeosCfmExtMEPDelayHistoryMinDelay Unsigned32
  wwpLeosCfmExtMEPDelayHistoryAveDelay Unsigned32
  wwpLeosCfmExtMEPDelayHistoryMaxDelay Unsigned32
  wwpLeosCfmExtMEPDelayHistoryMinJitter Unsigned32
  wwpLeosCfmExtMEPDelayHistoryAveJitter Unsigned32
  wwpLeosCfmExtMEPDelayHistoryMaxJitter Unsigned32
  wwpLeosCfmExtMEPDelayHistoryStartTime Unsigned32
  wwpLeosCfmExtMEPDelayHistoryStopTime Unsigned32
  wwpLeosCfmExtMEPDelayHistoryClear INTEGER

WwpLeosCfmExtLinkTraceMsgEntry  
SEQUENCE    
  wwpLeosCfmExtLinkTraceMsgLocalMepID INTEGER
  wwpLeosCfmExtLinkTraceMsgTargetMEPID INTEGER
  wwpLeosCfmExtLinkTraceMsgTargetMacAddr MacAddress
  wwpLeosCfmExtLinkTraceMsgTTL INTEGER
  wwpLeosCfmExtLinkTraceMsgSequenceNumber Integer32
  wwpLeosCfmExtLinkTraceMsgPriority INTEGER
  wwpLeosCfmExtLinkTraceMsgAction SendState

WwpLeosCfmExtLinkTraceMsgReplyEntry  
SEQUENCE    
  wwpLeosCfmExtLinkTraceMsgReplyTTL Integer32
  wwpLeosCfmExtLinkTraceMsgReplyTTLIndex Unsigned32
  wwpLeosCfmExtLinkTraceMsgReplySequenceNumber Integer32
  wwpLeosCfmExtLinkTraceMsgReplyMPMacAddr MacAddress
  wwpLeosCfmExtLinkTraceMsgReplyMEPID Integer32
  wwpLeosCfmExtLinkTraceMsgReplyTargetMacAddr MacAddress
  wwpLeosCfmExtLinkTraceMsgReplyRelayAction INTEGER
  wwpLeosCfmExtLinkTraceMsgReplyIngressPort INTEGER
  wwpLeosCfmExtLinkTraceMsgReplyIngressAction INTEGER
  wwpLeosCfmExtLinkTraceMsgReplyEgressPort INTEGER
  wwpLeosCfmExtLinkTraceMsgReplyEgressAction INTEGER
  wwpLeosCfmExtLinkTraceMsgReplyIngressPortStr DisplayString
  wwpLeosCfmExtLinkTraceMsgReplyEgressPortStr DisplayString

WwpLeosCfmExtDelayMsgEntry  
SEQUENCE    
  wwpLeosCfmExtDelayMsgLocalMEPId INTEGER
  wwpLeosCfmExtDelayMsgTargetMEPID Unsigned32
  wwpLeosCfmExtDelayMsgTargetMacAddr MacAddress
  wwpLeosCfmExtDelayMsgCount INTEGER
  wwpLeosCfmExtDelayMsgPriority INTEGER
  wwpLeosCfmExtDelayMsgRepeat INTEGER
  wwpLeosCfmExtDelayMsgRepeatCount INTEGER
  wwpLeosCfmExtDelayMsgDelayThreshold INTEGER
  wwpLeosCfmExtDelayMsgJitterThreshold INTEGER
  wwpLeosCfmExtDelayMsgAction SendState
  wwpLeosCfmExtDelayMsgMaxDelayThreshold INTEGER
  wwpLeosCfmExtDelayMsgMaxJitterThreshold INTEGER

WwpLeosCfmExtFrameLossMsgEntry  
SEQUENCE    
  wwpLeosCfmExtFrameLossMsgLocalMEPId INTEGER
  wwpLeosCfmExtFrameLossMsgTargetMEPID Unsigned32
  wwpLeosCfmExtFrameLossMsgTargetMacAddr MacAddress
  wwpLeosCfmExtFrameLossMsgCount INTEGER
  wwpLeosCfmExtFrameLossMsgPriority INTEGER
  wwpLeosCfmExtFrameLossMsgRepeat INTEGER
  wwpLeosCfmExtFrameLossMsgRepeatCount INTEGER
  wwpLeosCfmExtFrameLossMsgFlnThreshold INTEGER
  wwpLeosCfmExtFrameLossMsgFlfThreshold INTEGER
  wwpLeosCfmExtFrameLossMsgAction SendState
  wwpLeosCfmExtFrameLossMsgSeqThreshold INTEGER

WwpLeosCfmExtInterfaceStackEntry  
SEQUENCE    
  wwpLeosCfmExtInterfaceStackServiceInstanceType INTEGER
  wwpLeosCfmExtInterfaceStackServiceInstanceIndex Unsigned32
  wwpLeosCfmExtInterfaceStackInterfaceType INTEGER
  wwpLeosCfmExtInterfaceStackInterfaceIndex Unsigned32
  wwpLeosCfmExtInterfaceStackLevel Unsigned32
  wwpLeosCfmExtInterfaceStackStackType INTEGER
  wwpLeosCfmExtInterfaceStackInterfaceName DisplayString
  wwpLeosCfmExtInterfaceStackServiceInstanceName DisplayString
  wwpLeosCfmExtInterfaceStackPortName DisplayString
  wwpLeosCfmExtInterfaceStackOperState INTEGER
  wwpLeosCfmExtInterfaceStackVid INTEGER
  wwpLeosCfmExtInterfaceStackPgid Unsigned32
  wwpLeosCfmExtInterfaceStackMEPId INTEGER
  wwpLeosCfmExtInterfaceStackMacAddress MacAddress

WwpLeosCfmExtMipEntry  
SEQUENCE    
  wwpLeosCfmExtMipVid INTEGER
  wwpLeosCfmExtMipPort INTEGER
  wwpLeosCfmExtMipLevel INTEGER
  wwpLeosCfmExtMipStatus RowStatus

WwpLeosCfmExtInterfaceMipEntry  
SEQUENCE    
  wwpLeosCfmExtInterfaceMipServiceInstanceType INTEGER
  wwpLeosCfmExtInterfaceMipServiceInstanceIndex Unsigned32
  wwpLeosCfmExtInterfaceMipInterfaceType INTEGER
  wwpLeosCfmExtInterfaceMipInterfaceIndex Unsigned32
  wwpLeosCfmExtInterfaceMipInterfaceSubIndex Unsigned32
  wwpLeosCfmExtInterfaceMipLevel INTEGER
  wwpLeosCfmExtInterfaceMipStatus RowStatus

WwpLeosCfmExtOamPortEntry  
SEQUENCE    
  wwpLeosCfmExtOamPortIndex Integer32
  wwpLeosCfmExtOamPortSupported TruthValue

WwpLeosTceCfmMipEntry  
SEQUENCE    
  wwpLeosTceCfmMipLiType INTEGER
  wwpLeosTceCfmMipLiIndex INTEGER
  wwpLeosTceCfmMipPgid Unsigned32
  wwpLeosTceCfmMipBayIndex Unsigned32
  wwpLeosTceCfmMipShelfIndex Unsigned32
  wwpLeosTceCfmMipModuleIndex Unsigned32
  wwpLeosTceCfmMipMacAddr MacAddress
  wwpLeosTceCfmMipLevel INTEGER
  wwpLeosTceCfmMipStatus RowStatus
  wwpLeosTceCfmMipLiName DisplayString

WwpLeosTceCfmMipCCMDbEntry  
SEQUENCE    
  wwpLeosTceCfmMipCCMDbIndex Unsigned32
  wwpLeosTceCfmMipCCMDbMacAddr MacAddress
  wwpLeosTceCfmMipCCMDbServiceName DisplayString
  wwpLeosTceCfmMipCCMDbSubPortName DisplayString
  wwpLeosTceCfmMipCCMdbNumCCMRx Counter32
  wwpLeosTceCfmMipCCMDbCCMRxTime Unsigned32
  wwpLeosTceCfmMipCCMDbLevel INTEGER
  wwpLeosTceCfmMipCCMDbMEPID INTEGER
  wwpLeosTceCfmMipRDI INTEGER
  wwpLeosTceCfmMipLastPortStatus INTEGER

WwpLeosTceCfmLoopbackMsgEntry  
SEQUENCE    
  wwpLeosTceCfmLoopbackMsgLocalMEPID Unsigned32
  wwpLeosTceCfmLoopbackMsgTargetMEPID Unsigned32
  wwpLeosTceCfmLoopbackMsgTargetMacAddr MacAddress
  wwpLeosTceCfmLoopbackMsgCount INTEGER
  wwpLeosTceCfmLoopbackMsgData DisplayString
  wwpLeosTceCfmLoopbackMsgPriority INTEGER
  wwpLeosTceCfmLoopbackMsgServiceName DisplayString
  wwpLeosTceCfmLoopbackMsgSubPortName DisplayString
  wwpLeosTceCfmLoopbackMsgNextLbmTransId Unsigned32
  wwpLeosTceCfmLoopbackMsgTotalTxLbm Unsigned32
  wwpLeosTceCfmLoopbackMsgTotalRxLbrIo Unsigned32
  wwpLeosTceCfmLoopbackMsgTotalRxLbrOoo Unsigned32
  wwpLeosTceCfmLoopbackMsgRowStatus RowStatus
  wwpLeosTceCfmLoopbackMsgTotalRxLbrContentMismatch Unsigned32
  wwpLeosTceCfmLoopbackMsgTotalRxLbrUnexpected Unsigned32

WwpLeosTceCfmPortStackEntry  
SEQUENCE    
  wwpLeosTceCfmPortStackServiceType INTEGER
  wwpLeosTceCfmPortStackServiceIndex Unsigned32
  wwpLeosTceCfmPortStackSubPortType INTEGER
  wwpLeosTceCfmPortStackSubPortIndex Unsigned32
  wwpLeosTceCfmPortStackSubPortName DisplayString
  wwpLeosTceCfmPortStackOperState INTEGER
  wwpLeosTceCfmPortStackPgid Unsigned32
  wwpLeosTceCfmPortStackBayIndex Unsigned32
  wwpLeosTceCfmPortStackShelfIndex Unsigned32
  wwpLeosTceCfmPortStackModuleIndex Unsigned32
  wwpLeosTceCfmPortStackVsPbtName DisplayString
  wwpLeosTceCfmPortStackEgressXformTagValue1 Unsigned32
  wwpLeosTceCfmPortStackEgressXformTagPriority1 Unsigned32
  wwpLeosTceCfmPortStackEgressXformTagEtype1 Unsigned32
  wwpLeosTceCfmPortStackEgressXformTagValue2 Unsigned32
  wwpLeosTceCfmPortStackEgressXformTagPriority2 Unsigned32
  wwpLeosTceCfmPortStackEgressXformTagEtype2 Unsigned32
  wwpLeosTceCfmPortStackMepCount Unsigned32
  wwpLeosTceCfmPortStackMipLevel Unsigned32

WwpLeosTceCfmMEPEntry  
SEQUENCE    
  wwpLeosTceCfmMEPId Unsigned32
  wwpLeosTceCfmMEPAdminState INTEGER
  wwpLeosTceCfmMEPOperState INTEGER
  wwpLeosTceCfmMEPDirection INTEGER
  wwpLeosTceCfmMEPCCMState INTEGER
  wwpLeosTceCfmMEPCCMPriority INTEGER
  wwpLeosTceCfmMEPLTMPriority INTEGER
  wwpLeosTceCfmMEPMacAddr MacAddress
  wwpLeosTceCfmMEPNextLbmSeqNumber Counter32
  wwpLeosTceCfmMEPRxValidInOrderLoopbackReply Counter32
  wwpLeosTceCfmMEPRxValidOutOrderLoopbackReply Counter32
  wwpLeosTceCfmMEPNextLTMSeqNumber Counter32
  wwpLeosTceCfmMEPNumLoopbackRepliesTxmt Counter32
  wwpLeosTceCfmMEPNumLTMRecevied Counter32
  wwpLeosTceCfmMEPNumLTMTxmt Counter32
  wwpLeosTceCfmMEPNumCCMTxmt Counter32
  wwpLeosTceCfmMEPRowStatus RowStatus
  wwpLeosTceCfmMEPNumDMMSent Counter32
  wwpLeosTceCfmMEPDMMDelay Counter32
  wwpLeosTceCfmMEPDMMJitter Counter32
  wwpLeosTceCfmMEPNumLMMSent Counter32
  wwpLeosTceCfmMEPLMMFrameLossNear Counter32
  wwpLeosTceCfmMEPLMMFrameLossFar Counter32
  wwpLeosTceCfmMEPLiType INTEGER
  wwpLeosTceCfmMEPLiIndex Unsigned32
  wwpLeosTceCfmMEPServiceName DisplayString
  wwpLeosTceCfmMEPSubPortName DisplayString
  wwpLeosTceCfmMEPVsPbtName DisplayString
  wwpLeosTceCfmMEPLogicalPortName DisplayString
  wwpLeosTceCfmMEPSubPortIndex Unsigned32
  wwpLeosTceCfmMEPEncapsulation INTEGER
  wwpLeosTceCfmMEPLeadPortBayIndex Unsigned32
  wwpLeosTceCfmMEPLeadPortShelfIndex Unsigned32
  wwpLeosTceCfmMEPLeadPortModuleIndex Unsigned32
  wwpLeosTceCfmMEPPBTBvid Unsigned32
  wwpLeosTceCfmMEPPBTEtype Unsigned32
  wwpLeosTceCfmMEPNumLbmTxmt Counter32
  wwpLeosTceCfmMEPNumLbmReceived Counter32
  wwpLeosTceCfmMEPNumLoopbackRepliesReceived Counter32
  wwpLeosTceCfmMEPNumLTRepliesTxmt Counter32
  wwpLeosTceCfmMEPNumLTRepliesReceived Counter32
  wwpLeosTceCfmMEPNumUnexpectedLTRepliesReceived Counter32
  wwpLeosTceCfmMEPNumCCMReceived Counter32
  wwpLeosTceCfmMEPRxContentMismatchLoopbackReply Counter32
  wwpLeosTceCfmMEPRxUnexpectedLoopbackReply Counter32

WwpLeosTceCfmDelayMsgEntry  
SEQUENCE    
  wwpLeosTceCfmDelayMsgLocalMEPId INTEGER
  wwpLeosTceCfmDelayMsgTargetMEPID Unsigned32
  wwpLeosTceCfmDelayMsgTargetMacAddr MacAddress
  wwpLeosTceCfmDelayMsgCount INTEGER
  wwpLeosTceCfmDelayMsgPriority INTEGER
  wwpLeosTceCfmDelayMsgRowStatus RowStatus
  wwpLeosTceCfmDelayMsgRepeatInterval Unsigned32
  wwpLeosTceCfmDelayMsgDelayThreshold INTEGER
  wwpLeosTceCfmDelayMsgJitterThreshold INTEGER
  wwpLeosTceCfmDelayMsgServiceName DisplayString
  wwpLeosTceCfmDelayMsgSubPortName DisplayString
  wwpLeosTceCfmDelayMsgDelay Unsigned32
  wwpLeosTceCfmDelayMsgJitter Unsigned32
  wwpLeosTceCfmDelayMsgTotalTxDmm Unsigned32
  wwpLeosTceCfmDelayMsgTotalRxDmm Unsigned32
  wwpLeosTceCfmDelayMsgTotalTxDmr Unsigned32
  wwpLeosTceCfmDelayMsgTotalRxDmr Unsigned32
  wwpLeosTceCfmDelayMsgAction SendState
  wwpLeosTceCfmDelayMsgMaxDelay Unsigned32
  wwpLeosTceCfmDelayMsgMaxJitter Unsigned32
  wwpLeosTceCfmDelayMsgMaxDelayThreshold INTEGER
  wwpLeosTceCfmDelayMsgMaxJitterThreshold INTEGER
  wwpLeosTceCfmDelayMsgMinDelay Unsigned32
  wwpLeosTceCfmDelayMsgMinJitter Unsigned32

WwpLeosTceCfmFrameLossMsgEntry  
SEQUENCE    
  wwpLeosTceCfmFrameLossMsgLocalMEPId INTEGER
  wwpLeosTceCfmFrameLossMsgTargetMEPID Unsigned32
  wwpLeosTceCfmFrameLossMsgTargetMacAddr MacAddress
  wwpLeosTceCfmFrameLossMsgCount INTEGER
  wwpLeosTceCfmFrameLossMsgPriority INTEGER
  wwpLeosTceCfmFrameLossMsgRowStatus RowStatus
  wwpLeosTceCfmFrameLossMsgRepeatInterval Unsigned32
  wwpLeosTceCfmFrameLossMsgNearLossThreshold INTEGER
  wwpLeosTceCfmFrameLossMsgFarLossThreshold INTEGER
  wwpLeosTceCfmFrameLossMsgServiceName DisplayString
  wwpLeosTceCfmFrameLossMsgSubPortName DisplayString
  wwpLeosTceCfmFrameLossMsgFrameLossNear Unsigned32
  wwpLeosTceCfmFrameLossMsgFrameLossFar Unsigned32
  wwpLeosTceCfmFrameLossMsgTotalTxLmm Unsigned32
  wwpLeosTceCfmFrameLossMsgTotalRxLmm Unsigned32
  wwpLeosTceCfmFrameLossMsgTotalTxLmr Unsigned32
  wwpLeosTceCfmFrameLossMsgTotalRxLmr Unsigned32
  wwpLeosTceCfmFrameLossMsgAction SendState

Defined Values

wwpLeosCfmMIB 1.3.6.1.4.1.6141.2.60.35
Connectivity Fault Management (CFM) MIB for configuration and monitoring CFM
MODULE-IDENTITY    

wwpLeosCfmMIBObjects 1.3.6.1.4.1.6141.2.60.35.1
OBJECT IDENTIFIER    

wwpLeosCfmGlobal 1.3.6.1.4.1.6141.2.60.35.1.1
OBJECT IDENTIFIER    

wwpLeosCfmService 1.3.6.1.4.1.6141.2.60.35.1.2
OBJECT IDENTIFIER    

wwpLeosCfmMIP 1.3.6.1.4.1.6141.2.60.35.1.3
OBJECT IDENTIFIER    

wwpLeosCfmLinkTrace 1.3.6.1.4.1.6141.2.60.35.1.4
OBJECT IDENTIFIER    

wwpLeosCfmLoopback 1.3.6.1.4.1.6141.2.60.35.1.5
OBJECT IDENTIFIER    

wwpLeosCfmMaintenance 1.3.6.1.4.1.6141.2.60.35.1.6
OBJECT IDENTIFIER    

wwpLeosCfmMEP 1.3.6.1.4.1.6141.2.60.35.1.7
OBJECT IDENTIFIER    

wwpLeosCfmRemoteMEP 1.3.6.1.4.1.6141.2.60.35.1.8
OBJECT IDENTIFIER    

wwpLeosCfmStack 1.3.6.1.4.1.6141.2.60.35.1.9
OBJECT IDENTIFIER    

wwpLeosCfmMipCCMDb 1.3.6.1.4.1.6141.2.60.35.1.10
OBJECT IDENTIFIER    

wwpLeosCfmFaultNotif 1.3.6.1.4.1.6141.2.60.35.1.11
OBJECT IDENTIFIER    

wwpLeosCfmDelay 1.3.6.1.4.1.6141.2.60.35.1.12
OBJECT IDENTIFIER    

wwpLeosCfmFrameLoss 1.3.6.1.4.1.6141.2.60.35.1.13
OBJECT IDENTIFIER    

wwpLeosCfmRemoteMEPCCMLoss 1.3.6.1.4.1.6141.2.60.35.1.14
OBJECT IDENTIFIER    

wwpLeosCfmExtStack 1.3.6.1.4.1.6141.2.60.35.1.15
OBJECT IDENTIFIER    

wwpLeosCfmServiceFrameBudget 1.3.6.1.4.1.6141.2.60.35.1.16
OBJECT IDENTIFIER    

wwpLeosCfmExtMIBObj 1.3.6.1.4.1.6141.2.60.35.1.21
OBJECT IDENTIFIER    

wwpLeosCfmGlobalFrameBudget 1.3.6.1.4.1.6141.2.60.35.1.1.24
OBJECT IDENTIFIER    

wwpLeosCfmGlobalStats 1.3.6.1.4.1.6141.2.60.35.1.1.25
OBJECT IDENTIFIER    

wwpLeosCfmGlobalCCMStats 1.3.6.1.4.1.6141.2.60.35.1.1.25.26
OBJECT IDENTIFIER    

wwpLeosCfmGlobalLoopbackStats 1.3.6.1.4.1.6141.2.60.35.1.1.25.27
OBJECT IDENTIFIER    

wwpLeosCfmGlobalLinkTraceStats 1.3.6.1.4.1.6141.2.60.35.1.1.25.28
OBJECT IDENTIFIER    

wwpLeosCfmGlobalDelayMeasurementStats 1.3.6.1.4.1.6141.2.60.35.1.1.25.29
OBJECT IDENTIFIER    

wwpLeosCfmGlobalLossMeasurementStats 1.3.6.1.4.1.6141.2.60.35.1.1.25.30
OBJECT IDENTIFIER    

wwpLeosCfmExtLoopback 1.3.6.1.4.1.6141.2.60.35.1.21.3
OBJECT IDENTIFIER    

wwpLeosCfmExtMEP 1.3.6.1.4.1.6141.2.60.35.1.21.7
OBJECT IDENTIFIER    

wwpLeosCfmExtLinkTrace 1.3.6.1.4.1.6141.2.60.35.1.21.8
OBJECT IDENTIFIER    

wwpLeosCfmExtDelay 1.3.6.1.4.1.6141.2.60.35.1.21.12
OBJECT IDENTIFIER    

wwpLeosCfmExtFrameLoss 1.3.6.1.4.1.6141.2.60.35.1.21.13
OBJECT IDENTIFIER    

wwpLeosCfmExtInterfaceStack 1.3.6.1.4.1.6141.2.60.35.1.21.14
OBJECT IDENTIFIER    

wwpLeosCfmExtMIP 1.3.6.1.4.1.6141.2.60.35.1.21.15
OBJECT IDENTIFIER    

wwpLeosCfmExtInterfaceMIP 1.3.6.1.4.1.6141.2.60.35.1.21.16
OBJECT IDENTIFIER    

wwpLeosCfmExtOamPort 1.3.6.1.4.1.6141.2.60.35.1.21.17
OBJECT IDENTIFIER    

wwpLeosCfmNotifMIBNotificationPrefix 1.3.6.1.4.1.6141.2.60.35.2
OBJECT IDENTIFIER    

wwpLeosCfmNotifMIBNotification 1.3.6.1.4.1.6141.2.60.35.2.0
OBJECT IDENTIFIER    

wwpLeosCfmMIBConformance 1.3.6.1.4.1.6141.2.60.35.3
OBJECT IDENTIFIER    

wwpLeosCfmMIBCompliances 1.3.6.1.4.1.6141.2.60.35.3.1
OBJECT IDENTIFIER    

wwpLeosCfmMIBGroups 1.3.6.1.4.1.6141.2.60.35.3.2
OBJECT IDENTIFIER    

wwpLeosCfmState 1.3.6.1.4.1.6141.2.60.35.1.1.1
This object allows to globally configure CFM state.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

wwpLeosCfmEtherType 1.3.6.1.4.1.6141.2.60.35.1.1.2
This object specifies the Ethernet type value for CFM frames.
Status: current Access: read-write
OBJECT-TYPE    
  EthType  

wwpLeosCfmMEPHoldTime 1.3.6.1.4.1.6141.2.60.35.1.1.3
This object specifies the Time in ms to hold a MEP in an inactive state.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

wwpLeosCfmCcmAvailable 1.3.6.1.4.1.6141.2.60.35.1.1.4
This object specifies the current CCM available.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmY1731EtherType 1.3.6.1.4.1.6141.2.60.35.1.1.5
This object specifies the Optional Alternate Ethernet type for Y.1731 frames.
Status: current Access: read-write
OBJECT-TYPE    
  EthType  

wwpLeosCfmL2LoopDetectState 1.3.6.1.4.1.6141.2.60.35.1.1.6
This object allows to globally configure CFM's Layer 2 Loop detection state. Frames received by the switch that have a Source MAC of the the switch will be discarded.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

wwpLeosCfmDot1adStrict 1.3.6.1.4.1.6141.2.60.35.1.1.7
Controls compliance of processing 802.1ad encapsulated CFM frames in accordance with the 8021.ag standard. When on (1) CFM frames containing more than one VLAN tag are forwarded as normal data frames, bypassing processing by MEPs and MIPs. When off (2) CFM frames with multiple VLAN tags are subject to normal CFM processing.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

wwpLeosCfmMipLevelEnforcement 1.3.6.1.4.1.6141.2.60.35.1.1.8
Controls enforcement of a MIPs associated MD Level. When on (1) a MIP will only process CFM messages received at its level. When off (2) a MIP will process frames received at any level.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

wwpLeosCfmMipCcmDbState 1.3.6.1.4.1.6141.2.60.35.1.1.9
The administrative state of the MIP CCM Database. A MIP only records CCMs in the MIP CCM Database when this object is set to enable (1).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wwpLeosCfmLBMDefaultCount 1.3.6.1.4.1.6141.2.60.35.1.1.10
The global default loopback message count.
Status: deprecated Access: read-write
OBJECT-TYPE    
  Integer32  

wwpLeosCfmLBMDefaultInterval 1.3.6.1.4.1.6141.2.60.35.1.1.11
The global default loopback message interval.
Status: deprecated Access: read-write
OBJECT-TYPE    
  Integer32  

wwpLeosCfmLBMDefaultTimeout 1.3.6.1.4.1.6141.2.60.35.1.1.12
The global default loopback message timeout.
Status: deprecated Access: read-write
OBJECT-TYPE    
  Integer32  

wwpLeosCfmFrameClassifierMode 1.3.6.1.4.1.6141.2.60.35.1.1.13
Configures the hardware frame classification mode used to detect CFM and Y.1731 frames that should be sent to the CPU for processing. Changing this mode will cause a reboot of the device.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER etype(1), etypeMd(2)  

wwpLeosCfmGlobalLBMDefaultCount 1.3.6.1.4.1.6141.2.60.35.1.1.16
The global default loopback message count.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

wwpLeosCfmGlobalLBMDefaultInterval 1.3.6.1.4.1.6141.2.60.35.1.1.17
The global default loopback message interval.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

wwpLeosCfmGlobalLBMDefaultTimeout 1.3.6.1.4.1.6141.2.60.35.1.1.18
The global default loopback message timeout.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

wwpLeosCfmGlobalFrameClassifierMode 1.3.6.1.4.1.6141.2.60.35.1.1.19
Configures the hardware frame classification mode used to detect CFM and Y.1731 frames that should be sent to the CPU for processing. Changing this mode will cause a reboot of the device.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER etype(1), etypeMd(2)  

wwpLeosCfmStatsTotalTx 1.3.6.1.4.1.6141.2.60.35.1.1.25.1
The number of frames sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmStatsTotalRx 1.3.6.1.4.1.6141.2.60.35.1.1.25.2
The number of frames received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmStatsTxFloodedFrames 1.3.6.1.4.1.6141.2.60.35.1.1.25.3
The number of Flooded frames sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmStatsTxFloodedIgnoredStpState 1.3.6.1.4.1.6141.2.60.35.1.1.25.4
The number of flooded ignored frames sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmStatsRxTotalValidFrames 1.3.6.1.4.1.6141.2.60.35.1.1.25.5
The number of valid frames received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmStatsRxTotalNotValidatedFrames 1.3.6.1.4.1.6141.2.60.35.1.1.25.6
The number of not validated frames received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmStatsRxTotalInValidFrames 1.3.6.1.4.1.6141.2.60.35.1.1.25.7
The number of invalid frames received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmTotalRxInvalidMessageOverflow 1.3.6.1.4.1.6141.2.60.35.1.1.25.8
The number of invalid message overflow frames received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmTotalRxInvalidPortStatusTLV 1.3.6.1.4.1.6141.2.60.35.1.1.25.9
The number of invalid port status TLV received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmTotalRxInvalidInterfaceStatusTLV 1.3.6.1.4.1.6141.2.60.35.1.1.25.10
The number of invalid interface status TLV received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmTotalRxInvalidSenderIDTLV 1.3.6.1.4.1.6141.2.60.35.1.1.25.11
The number of invalid sender ID TLV received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmRxAdminDisableDropped 1.3.6.1.4.1.6141.2.60.35.1.1.25.12
The number of frames dropped when in admin disable mode.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLesoCfmRxInvalidEtypeDropped 1.3.6.1.4.1.6141.2.60.35.1.1.25.13
The number of frames dropped when in admin disable mode.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmRxInvalidOpCodeDropped 1.3.6.1.4.1.6141.2.60.35.1.1.25.14
The number of received Invalid Opcode frames dropped.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmRxSTPStateNotForwardingDropped 1.3.6.1.4.1.6141.2.60.35.1.1.25.15
The number of frames dropped when system is not in STP forwarding mode.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmGlobalStatsClear 1.3.6.1.4.1.6141.2.60.35.1.1.25.16
Setting this object to clear will clear statistics globally (Global Stats, Service Stats and Mep Stats). This object cannot be set to none.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clear(1), none(2)  

wwpLeosCfmGlobalLoopbackMsgStatsClear 1.3.6.1.4.1.6141.2.60.35.1.1.25.17
Setting this object to clear will clear Loopback Statistics globally(Global stats, Service Stats and Mep Stats).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clear(1), none(2)  

wwpLeosCfmGlobalLinkTraceMsgStatsClear 1.3.6.1.4.1.6141.2.60.35.1.1.25.18
Setting this object to clear will clear Link Trace Statistics globally(Global stats, Service Stats and Mep Stats).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clear(1), none(2)  

wwpLeosCfmGlobalDelayMeasurementMsgStatsClear 1.3.6.1.4.1.6141.2.60.35.1.1.25.19
Setting this object to clear will clear Delay Measurement Statistics globally(Global stats, Service Stats and Mep Stats).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clear(1), none(2)  

wwpLeosCfmGlobalLossMeasurementMsgStatsClear 1.3.6.1.4.1.6141.2.60.35.1.1.25.20
Setting this object to clear will clear Loss Measurement Statistics globally(Global stats, Service Stats and Mep Stats).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clear(1), none(2)  

wwpLeosCfmTotalRxDropBlockedOppositeMep 1.3.6.1.4.1.6141.2.60.35.1.1.25.21
The number of received Blocked by Opposite Mep frames dropped.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmTotalTxCCM 1.3.6.1.4.1.6141.2.60.35.1.1.25.26.1
The total number of CCM frames sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmTotalTxCCMFlooded 1.3.6.1.4.1.6141.2.60.35.1.1.25.26.2
The total number of flooded CCM frames sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmTotalRxValidCCM 1.3.6.1.4.1.6141.2.60.35.1.1.25.26.3
The number of valid frames received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmTotalRxCCMInSequence 1.3.6.1.4.1.6141.2.60.35.1.1.25.26.4
The number of CCM frames received in sequence.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmTotalRxCCMSequenceError 1.3.6.1.4.1.6141.2.60.35.1.1.25.26.5
The number of errored CCM frames received in sequence.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmTotalCCMRxMDLevelXcon 1.3.6.1.4.1.6141.2.60.35.1.1.25.26.6
The number of MD Level CFM frames received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmTotalCCMRxMAIDXcon 1.3.6.1.4.1.6141.2.60.35.1.1.25.26.7
The number of MAID Xcon CFM frames received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmTotalRxCCMErrorOnMepId 1.3.6.1.4.1.6141.2.60.35.1.1.25.26.8
The number of frames dropped when in admin disable mode.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmTotalRxCCMIntervalError 1.3.6.1.4.1.6141.2.60.35.1.1.25.26.9
The number of interval error frames received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmTotalRxInvalidCCM 1.3.6.1.4.1.6141.2.60.35.1.1.25.26.10
The number of invalid CCM frames received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmTotalTxLBM 1.3.6.1.4.1.6141.2.60.35.1.1.25.27.1
The number of Loopback messages sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmTotalTxLBR 1.3.6.1.4.1.6141.2.60.35.1.1.25.27.2
The total number of Loopback Replies frames sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmTotalRxInOderLBR 1.3.6.1.4.1.6141.2.60.35.1.1.25.27.3
The total number of In order LBR frames received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmTotalRxOOOLBR 1.3.6.1.4.1.6141.2.60.35.1.1.25.27.4
The number of Out of Order LBR frames received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmTotalRxContentMismatchLBR 1.3.6.1.4.1.6141.2.60.35.1.1.25.27.5
The number of Content Mismatch LBR frames received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmTotalRxUnexpectedLBR 1.3.6.1.4.1.6141.2.60.35.1.1.25.27.6
The number of unexpected LBR frames received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmTotalRxInvalidLBR 1.3.6.1.4.1.6141.2.60.35.1.1.25.27.7
The number of invalid LBR frames received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmTotalRxvalidLBM 1.3.6.1.4.1.6141.2.60.35.1.1.25.27.8
The number of valid LBM frames received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmTotalRxInvalidLBM 1.3.6.1.4.1.6141.2.60.35.1.1.25.27.9
The number of invalid LBM frames received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmTotalTxLTM 1.3.6.1.4.1.6141.2.60.35.1.1.25.28.1
The number of LTM frames sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmTotalTxLTR 1.3.6.1.4.1.6141.2.60.35.1.1.25.28.2
The total number of LTR frames sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmTotalRxValidLTM 1.3.6.1.4.1.6141.2.60.35.1.1.25.28.3
The total number of LTM frames received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmTotalRxValidLTR 1.3.6.1.4.1.6141.2.60.35.1.1.25.28.4
The total number of Valid LTR frames received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmTotalRxUnexpectedLTR 1.3.6.1.4.1.6141.2.60.35.1.1.25.28.5
The total number of unexpected LTR frames received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmTotalRxInvalidLTR 1.3.6.1.4.1.6141.2.60.35.1.1.25.28.6
The total number of Invalid LTR frames received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmInvalidLTRRelayAction 1.3.6.1.4.1.6141.2.60.35.1.1.25.28.7
The total number of Invalid LTR Action.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmTotalRxInvalidLTM 1.3.6.1.4.1.6141.2.60.35.1.1.25.28.8
The total number of Invalid LTM frames received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmRxUnresolvedLTM 1.3.6.1.4.1.6141.2.60.35.1.1.25.28.9
The total number of Unresolved LTM frames received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmTotalTxDMM 1.3.6.1.4.1.6141.2.60.35.1.1.25.29.1
The total number of Delay Measurements messages sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmTotalTxDMR 1.3.6.1.4.1.6141.2.60.35.1.1.25.29.2
The total number of Delay Measurements Reply sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmTotalRxDMM 1.3.6.1.4.1.6141.2.60.35.1.1.25.29.3
The total number of Delay Measurements Messages received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmTotalRxDMR 1.3.6.1.4.1.6141.2.60.35.1.1.25.29.4
The total number of Delay Measurements Reply received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmTotalTxLMM 1.3.6.1.4.1.6141.2.60.35.1.1.25.30.1
The total number of Loss Measurements messages sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmTotalTxLMR 1.3.6.1.4.1.6141.2.60.35.1.1.25.30.2
The total number of Loss Measurements Reply frames sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmTotalRxLMM 1.3.6.1.4.1.6141.2.60.35.1.1.25.30.3
The total number of LMM received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmTotalRxLMR 1.3.6.1.4.1.6141.2.60.35.1.1.25.30.4
The total number of LMR received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmGlobalControlModuleFrameBudget 1.3.6.1.4.1.6141.2.60.35.1.1.24.1
Control Module Frame Budget . Not applicable to 6.x
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmGlobalFrameBudgetTable 1.3.6.1.4.1.6141.2.60.35.1.1.24.2
Global Frame Budget Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosCfmGlobalFrameBudgetEntry

wwpLeosCfmGlobalFrameBudgetEntry 1.3.6.1.4.1.6141.2.60.35.1.1.24.2.1
An entry (conceptual row) in the wwpLeosCfmServiceTable. Not applicable to 6.x
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosCfmGlobalFrameBudgetEntry  

wwpLeosCfmGlobalFrameBudgetSlotIndex 1.3.6.1.4.1.6141.2.60.35.1.1.24.2.1.1
Slot Index
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

wwpLeosCfmGlobalFrameBudgetValue 1.3.6.1.4.1.6141.2.60.35.1.1.24.2.1.2
Frame budget value
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmServiceTable 1.3.6.1.4.1.6141.2.60.35.1.2.1
The (conceptual) table listing the configuration parameters for the CFM Service Table. To create an entry in this table the following criteria must be followed: wwpLeosCfmServiceType must be specified. wwpLeosCfmServiceValue must be specified. wwpLeosCfmServiceName must be specified. wwpLeosCfmServiceStatus must be set to createAndGo.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosCfmServiceEntry

wwpLeosCfmServiceEntry 1.3.6.1.4.1.6141.2.60.35.1.2.1.1
An entry (conceptual row) in the wwpLeosCfmServiceTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosCfmServiceEntry  

wwpLeosCfmServiceIndex 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.1
A unique identifier for CFM service entry.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..65535  

wwpLeosCfmServiceType 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.2
This object is used to specify the service type. Interpretation of wwpLeosCfmServiceValue depends on the value of this MIB object. This MIB object along with wwpLeosCfmServiceValue must be unique for each entry in this table
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER mplsVs(1), ethVs(2), vlan(3), pbtTunnel(4), vs(5), other(9)  

wwpLeosCfmServiceValue 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.3
This object is used to specify the service value. Interpretation of this object depends on the value of wwpLeosCfmServiceType. This MIB object along with wwpLeosCfmServiceType must be unique for each entry in this table
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..65535  

wwpLeosCfmServiceAdminState 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.4
This object specifies the admin state of CFM for this service type.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

wwpLeosCfmServiceOperState 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.5
The operational state of CFM for this service type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

wwpLeosCfmServiceAlarmTime 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.6
This MIB object allows to set the time interval that a service fault detected by wwpLeosCfmServiceType must be present prior to triggering a fault alarm.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..60000  

wwpLeosCfmServiceCCMInterval 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.7
This MIB object allows to set the CCM transmission interval index for the service specified by wwpLeosCfmServiceType. This determines the frequency at which CCMs are transmitted. The length of the interval increases exponentially with the index value. Setting the interval to 0 disables CCM transmission from all MEPs in the MA.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

wwpLeosCfmServiceName 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.9
This MIB object allows to set the CFM service name.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..31)  

wwpLeosCfmServiceMdLevel 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.10
This MIB object sets the CFM service level which associates it with a Maintenance Domain.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..7  

wwpLeosCfmServiceResetTime 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.11
This MIB object set the time interval during which no service faults can be detected before the service will reset a fault alarm.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 10..36000  

wwpLeosCfmServiceLastFaultCCM 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.12
This MIB object shows last received CCM fault.
Status: current Access: read-only
OBJECT-TYPE    
  CfmDisplayString  

wwpLeosCfmServiceRMEPFailureFlag 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.13
This MIB object shows the RMEP failure flag.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

wwpLeosCfmServiceCCMErrorFlag 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.14
This MIB object shows the CCM Error flag.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

wwpLeosCfmServiceCrossConnectErrorFlag 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.15
This MIB object shows the cross-connect Error flag.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

wwpLeosCfmServiceNumMEP 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.16
This MIB object shows Number of MEPs.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmServiceNumRemoteMEP 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.17
This MIB object shows the Number of Remote MEPs.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmServiceNumActiveMEP 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.18
This MIB object shows the Number of active MEPs.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmServiceStatus 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.19
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, set this object to 'destroy'.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

wwpLeosCfmServiceNextMepId 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.20
This mib object specifies the next MEP Id for given service.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..8191  

wwpLeosCfmServiceAlarmPriority 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.21
This mib object specifies the alarm priority for given service.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..5  

wwpLeosCfmServiceNumCCMForFault 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.22
The number of CCM frames that must go undelivered for the service to be declared as operationally down.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..255  

wwpLeosCfmServiceDMMInterval 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.23
This MIB object allows to set the DMM transmission interval index for the service specified by wwpLeosCfmServiceType. This determines the frequency at which DMMs are transmitted. The length of the interval increases exponentially with the index value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..7  

wwpLeosCfmServiceLMMInterval 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.24
This MIB object allows to set the LMM transmission interval index for the service specified by wwpLeosCfmServiceType. This determines the frequency at which LMMs are transmitted. The length of the interval increases exponentially with the index value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..7  

wwpLeosCfmServiceCCMLossStatsState 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.25
This object specifies the operational state of CCM loss accounting for RMEPs learned by this service type.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

wwpLeosCfmServiceCCMLossBucketInterval 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.26
This object specifies the interval in minutes that each of the 96 CCM loss history buckets spans. The default is 15 minutes, which means the default history covers 24 hours.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..60  

wwpLeosCfmServiceRemoteMepDiscovery 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.27
This object specifies whether remote meps should be discovered automatically. if this object is set to enable it will cause remote meps to be discovered automatically and if set to disable will not discover rempote meps.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

wwpLeosCfmServiceY1731 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.28
Specifies if y1731 is enabled for the service.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

wwpLeosCfmServiceAccelerated 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.49
Specifies if the service is supported in hardware .
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

wwpLeosCfmServiceTlvSenderIdType 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.50
This mib object specifies the Sender Id Tlv Type.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(1), chassis(2), manage(3), chassisManage(4)  

wwpLeosCfmServiceRMEPHoldTime 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.51
This mib object specifies the Remote MEP hold time in milliseconds.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..3600000  

wwpLeosCfmServiceCCMTxState 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.52
This mib object specifies the admin state of the CCM Tx.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

wwpLeosCfmServicePortStatusFlag 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.53
This mib object shows the Port Status defect flag.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

wwpLeosCfmServiceRDIFlag 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.54
This mib object shows the RDI defect flag.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

wwpLeosCfmServiceInstabilityFlag 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.55
This mib object shows the Instability defect flag.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

wwpLeosCfmServiceRMEPAging 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.56
Controls automatic Remote MEP aging for the service.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

wwpLeosCfmServiceDefaultMEPType 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.57
This object is used to specify the type of all MEP's created for the service. Services of type PBT must specify a MEP type of 'down'.
Status: deprecated Access: read-create
OBJECT-TYPE    
  INTEGER up(1), down(2)  

wwpLeosCfmServiceMAID 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.58
The MAID send by CCM's associated with the service.
Status: deprecated Access: read-only
OBJECT-TYPE    
  CfmMAID  

wwpLeosCfmServiceMdIndex 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.59
The unique index in the Maint Domain table.
Status: deprecated Access: read-write
OBJECT-TYPE    
  Unsigned32  

wwpLeosCfmServiceMaintAssocNameType 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.60
The type (and thereby format) of the Maintenance Association Name.
Status: deprecated Access: read-write
OBJECT-TYPE    
  Dot1agCfmMaintAssocNameType  

wwpLeosCfmServiceMaintAssocName 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.61
The Short Maintenance Association name. The type/format of this object is determined by the value of the dot1agCfmMaNetNameType object.
Status: deprecated Access: read-write
OBJECT-TYPE    
  Dot1agCfmMaintAssocName  

wwpLeosCfmServiceMulticastDa 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.65
Specifies if multicast DA mode is enabled for the service.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

wwpLeosCfmServiceChargedAgainstGlobalFrameBudget 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.71
This MIB object reflects if this service is charged against the global frame budget.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

wwpLeosCfmServiceCfmDefaultMEPType 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.72
This object is used to specify the type of all MEP's created for the service. Services of type PBT must specify a MEP type of 'down'.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER up(1), down(2)  

wwpLeosCfmServiceCfmMAID 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.73
The MAID send by CCM's associated with the service.
Status: current Access: read-only
OBJECT-TYPE    
  CfmMAID  

wwpLeosCfmServiceCfmMdIndex 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.74
The unique index in the Maint Domain table.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

wwpLeosCfmServiceCfmMaintAssocNameType 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.75
The type (and thereby format) of the Maintenance Association Name.
Status: current Access: read-write
OBJECT-TYPE    
  Dot1agCfmMaintAssocNameType  

wwpLeosCfmServiceCfmMaintAssocName 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.76
The Short Maintenance Association name. The type/format of this object is determined by the value of the dot1agCfmMaNetNameType object.
Status: current Access: read-write
OBJECT-TYPE    
  Dot1agCfmMaintAssocName  

wwpLeosCfmServiceCfmControlModuleFrameBudget 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.77
Cfm Frame budget for control module for the given service.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmServiceFrameBudgetTable 1.3.6.1.4.1.6141.2.60.35.1.16.1
The (conceptual) table listing the config parameters for the CFM service frame budget table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosCfmServiceFrameBudgetEntry

wwpLeosCfmServiceFrameBudgetEntry 1.3.6.1.4.1.6141.2.60.35.1.16.1.1
An entry (conceptual row) in the wwpLeosCfmServiceFrameBudgetTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosCfmServiceFrameBudgetEntry  

wwpLeosCfmSlotIndex 1.3.6.1.4.1.6141.2.60.35.1.16.1.1.1
This object identifies the slot number.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..8  

wwpLeosCfmServiceFrameBudgetSlot 1.3.6.1.4.1.6141.2.60.35.1.16.1.1.2
This object specifies the CFM frame budget for the slot for the given service.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmMipTable 1.3.6.1.4.1.6141.2.60.35.1.3.1
The (conceptual) table listing the configuration parameters for the CFM MIP Table. This table is not applicable if wwpLeosCfmServiceType is set to pbtTunnel. Any Get/Set/Walk will return error.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosCfmMipEntry

wwpLeosCfmMipEntry 1.3.6.1.4.1.6141.2.60.35.1.3.1.1
An entry (conceptual row) in the wwpLeosCfmMipTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosCfmMipEntry  

wwpLeosCfmMipVid 1.3.6.1.4.1.6141.2.60.35.1.3.1.1.1
This object is used as index in the table and is used to specify the VLAN service type for which intermediate maintenance points can be created.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..24576  

wwpLeosCfmMipPort 1.3.6.1.4.1.6141.2.60.35.1.3.1.1.2
This object is used as index in the table and is used to specify the port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

wwpLeosCfmMipLevel 1.3.6.1.4.1.6141.2.60.35.1.3.1.1.3
This object is used to specify the level attribute.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..7  

wwpLeosCfmMipStatus 1.3.6.1.4.1.6141.2.60.35.1.3.1.1.4
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, set it to 'destroy'.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

wwpLeosCfmLinkTraceMsgTable 1.3.6.1.4.1.6141.2.60.35.1.4.1
The (conceptual) table listing the configuration parameters for the LinkTraceMsg. Not applicable to 6.x
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosCfmLinkTraceMsgEntry

wwpLeosCfmLinkTraceMsgEntry 1.3.6.1.4.1.6141.2.60.35.1.4.1.1
An entry (conceptual row) in the wwpLeosCfmLinkTraceMsgTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosCfmLinkTraceMsgEntry  

wwpLeosCfmLinkTraceMsgPortId 1.3.6.1.4.1.6141.2.60.35.1.4.1.1.1
This object is used to specify the port.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..65535  

wwpLeosCfmLinkTraceMsgTargetMEPID 1.3.6.1.4.1.6141.2.60.35.1.4.1.1.2
This object is used to specify the target MEPID. This object should only be set if wwpLeosCfmLinkTraceMsgTargetMacAddr is not specified else error will be returned.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..8191  

wwpLeosCfmLinkTraceMsgTargetMacAddr 1.3.6.1.4.1.6141.2.60.35.1.4.1.1.3
This object is used to specify the target MacAddress to be used when sending link LinkMsg. This object should only be set if wwpLeosCfmLinkTraceMsgTargetMEPID is not specified else error will be returned.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

wwpLeosCfmLinkTraceMsgTTL 1.3.6.1.4.1.6141.2.60.35.1.4.1.1.4
This object is used to specify the TTL to be used when sending link LinkTraceMsg.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..255  

wwpLeosCfmLinkTraceMsgSequenceNumber 1.3.6.1.4.1.6141.2.60.35.1.4.1.1.5
This object is used to specify the sequence number in the linkTraceMsg.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

wwpLeosCfmLinkTraceMsgRowStatus 1.3.6.1.4.1.6141.2.60.35.1.4.1.1.6
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, set this to 'destroy'.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

wwpLeosCfmLinkTraceMsgPriority 1.3.6.1.4.1.6141.2.60.35.1.4.1.1.7
This object is used to specify the priority to be used when sending LinkTraceMsg.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..7  

wwpLeosCfmLinkTraceMsgServiceName 1.3.6.1.4.1.6141.2.60.35.1.4.1.1.50
This object is used to specify the service to be used when sending LinkTraceMsg.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..31)  

wwpLeosCfmLinkTraceMsgSubPortName 1.3.6.1.4.1.6141.2.60.35.1.4.1.1.52
This object represents the sub-port name where the LinkTraceMsg was sent.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

wwpLeosCfmLinkTraceMsgVsIndex 1.3.6.1.4.1.6141.2.60.35.1.4.1.1.53
This object represents the virtual switch where the LinkTraceMsg was sent.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosCfmLinkTraceMsgTotalTxLtm 1.3.6.1.4.1.6141.2.60.35.1.4.1.1.54
This object represents the total LinkTraceMsg were sent.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosCfmLinkTraceMsgTotalRxLtr 1.3.6.1.4.1.6141.2.60.35.1.4.1.1.55
This object represents the total LinkTraceMsg were received from the LinkTraceResponse.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosCfmLinkTraceMsgReplyTable 1.3.6.1.4.1.6141.2.60.35.1.4.2
The (conceptual) table listing the display parameters for the LinkTrace Msg Reply.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosCfmLinkTraceMsgReplyEntry

wwpLeosCfmLinkTraceMsgReplyEntry 1.3.6.1.4.1.6141.2.60.35.1.4.2.1
An entry (conceptual row) in the wwpLeosCfmLinkTraceMsgReplyTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosCfmLinkTraceMsgReplyEntry  

wwpLeosCfmLinkTraceMsgReplyTTL 1.3.6.1.4.1.6141.2.60.35.1.4.2.1.1
This object is used to specify the ttl of the received LinkTrace msg reply.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

wwpLeosCfmLinkTraceMsgReplyTTLIndex 1.3.6.1.4.1.6141.2.60.35.1.4.2.1.2
This object provides an additional index when multiple LinkTrace messages are received with the same TTL.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..24576  

wwpLeosCfmLinkTraceMsgReplySequenceNumber 1.3.6.1.4.1.6141.2.60.35.1.4.2.1.3
This object is used to specify the sequence number of the received LinkTrace msg reply.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

wwpLeosCfmLinkTraceMsgReplyMPMacAddr 1.3.6.1.4.1.6141.2.60.35.1.4.2.1.4
This object is used to specify the mac address of the MP of received LinkTrace msg reply.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

wwpLeosCfmLinkTraceMsgReplyMEPID 1.3.6.1.4.1.6141.2.60.35.1.4.2.1.5
This object is used to specify the MEP ID of the received LinkTrace msg reply.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

wwpLeosCfmLinkTraceMsgReplyTargetMacAddr 1.3.6.1.4.1.6141.2.60.35.1.4.2.1.6
This object is used to specify the Target Mac address of the received LinkTrace msg reply.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

wwpLeosCfmLinkTraceMsgReplyRelayAction 1.3.6.1.4.1.6141.2.60.35.1.4.2.1.7
This object is used to specify the message reply relay action.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER invalid(1), unknown(2), fdb(3), mpdb(4), noLearn(5), hit(6)  

wwpLeosCfmLinkTraceMsgReplyIngressPort 1.3.6.1.4.1.6141.2.60.35.1.4.2.1.8
This object is used to specify the message reply ingress port.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

wwpLeosCfmLinkTraceMsgReplyIngressAction 1.3.6.1.4.1.6141.2.60.35.1.4.2.1.9
This object is used to specify the message reply ingress action.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), blocked(2), vid(3), down(4), none(5)  

wwpLeosCfmLinkTraceMsgReplyEgressPort 1.3.6.1.4.1.6141.2.60.35.1.4.2.1.10
This object is used to specify the message reply egress port.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

wwpLeosCfmLinkTraceMsgReplyEgressAction 1.3.6.1.4.1.6141.2.60.35.1.4.2.1.11
This object is used to specify the message reply egress action.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), ttl(2), down(3), blocked(4), vid(5), ok(6)  

wwpLeosCfmLinkTraceMsgReplyIngressPortStr 1.3.6.1.4.1.6141.2.60.35.1.4.2.1.12
This mib object is used to specify the message reply ingress port.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..8)  

wwpLeosCfmLinkTraceMsgReplyEgressPortStr 1.3.6.1.4.1.6141.2.60.35.1.4.2.1.13
This mib object is used to specify the message reply egress port.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..8)  

wwpLeosCfmLinkTraceMsgReplyIngressMacAddr 1.3.6.1.4.1.6141.2.60.35.1.4.2.1.50
This object is used to specify the message reply ingress mac address.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

wwpLeosCfmLinkTraceMsgReplyEgressMacAddr 1.3.6.1.4.1.6141.2.60.35.1.4.2.1.51
This object is used to specify the message reply egress mac address.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

wwpLeosCfmLoopbackMsgTable 1.3.6.1.4.1.6141.2.60.35.1.5.1
The (conceptual) table listing the configuration parameters for the LoopbackMsg.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosCfmLoopbackMsgEntry

wwpLeosCfmLoopbackMsgEntry 1.3.6.1.4.1.6141.2.60.35.1.5.1.1
An entry (conceptual row) in the wwpLeosCfmLoopbackMsgTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosCfmLoopbackMsgEntry  

wwpLeosCfmLoopbackMsgPortId 1.3.6.1.4.1.6141.2.60.35.1.5.1.1.1
This object is used to specify the port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

wwpLeosCfmLoopbackMsgTargetMEPID 1.3.6.1.4.1.6141.2.60.35.1.5.1.1.2
This object is used to specify the MEPID. This object should only be set if wwpLeosCfmLoopbackMsgTargetMacAddr is not specified else error will be returned.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..8191  

wwpLeosCfmLoopbackMsgTargetMacAddr 1.3.6.1.4.1.6141.2.60.35.1.5.1.1.3
This object is used to specify the MacAddress to be used when sending link LoopbackMsg. This object should only be set if wwpLeosCfmLoopbackMsgTargetMEPID is not specified else error will be returned.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

wwpLeosCfmLoopbackMsgCount 1.3.6.1.4.1.6141.2.60.35.1.5.1.1.4
This object is used to specify the LoopbackMsg count to be used when sending link LoopbackMsg.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..20  

wwpLeosCfmLoopbackMsgData 1.3.6.1.4.1.6141.2.60.35.1.5.1.1.5
This object is used to specify the LoopbackMsg data to be used when sending link LoopbackMsg.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..127)  

wwpLeosCfmLoopbackMsgPriority 1.3.6.1.4.1.6141.2.60.35.1.5.1.1.6
This object is used to specify the LoopbackMsg priority to be used when sending link LoopbackMsg.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..7  

wwpLeosCfmLoopbackMsgRowStatus 1.3.6.1.4.1.6141.2.60.35.1.5.1.1.7
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, set this to 'destroy'.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

wwpLeosCfmLoopbackMsgDefaultInterval 1.3.6.1.4.1.6141.2.60.35.1.5.1.1.8
The global default LoopbackMsg interval to be used when sending link LoopbackMsg
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 10..60000  

wwpLeosCfmLoopbackMsgDefaultTimeout 1.3.6.1.4.1.6141.2.60.35.1.5.1.1.9
The global default LoopbackMsg timeout to be used when sending link LoopbackMsg
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 2000..10000  

wwpLeosCfmMaintenanceDomainTable 1.3.6.1.4.1.6141.2.60.35.1.6.1
The (conceptual) table listing the configuration parameters for the CFM Maintenance Domain Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosCfmMaintenanceDomainEntry

wwpLeosCfmMaintenanceDomainEntry 1.3.6.1.4.1.6141.2.60.35.1.6.1.1
An entry (conceptual row) in the wwpLeosCfmMaintenanceDomainTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosCfmMaintenanceDomainEntry  

wwpLeosCfmMaintenanceDomainIndex 1.3.6.1.4.1.6141.2.60.35.1.6.1.1.1
This object specfies the unique index in the table.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosCfmMaintenanceDomainLevel 1.3.6.1.4.1.6141.2.60.35.1.6.1.1.2
This object specfies the domain level.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

wwpLeosCfmMaintenanceDomainName 1.3.6.1.4.1.6141.2.60.35.1.6.1.1.3
The domain name which can be modified.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..31)  

wwpLeosCfmMaintenanceDomainServiceCount 1.3.6.1.4.1.6141.2.60.35.1.6.1.1.4
This object specfies number of cfm services mapped to this domain.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosCfmMaintenanceDomainMdFormat 1.3.6.1.4.1.6141.2.60.35.1.6.1.1.5
The type (and thereby format) of the Maintenance Domain Name.
Status: current Access: read-write
OBJECT-TYPE    
  Dot1agCfmMaintDomainNameType  

wwpLeosCfmMaintenanceDomainMdName 1.3.6.1.4.1.6141.2.60.35.1.6.1.1.6
The Maintenance Domain name. The type/format of this object is determined by the value of the wwpLeosCfmMaintenanceDomainMdFormat object.
Status: current Access: read-write
OBJECT-TYPE    
  Dot1agCfmMaintDomainName  

wwpLeosCfmMaintenanceDomainStatus 1.3.6.1.4.1.6141.2.60.35.1.6.1.1.7
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo' and specify, at a minimum, the wwpLeosCfmMaintenanceDomainLevel and wwpLeosCfmMaintenanceDomainName objects. During a create/set operation, if a non-default MdFormat is required, both the wwpLeosCfmMaintenanceDomainMdFormat and wwpLeosCfmMaintenanceDomainMdName objects must also be specified. To delete a row in this table, set this object to 'destroy'.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

wwpLeosCfmMEPTable 1.3.6.1.4.1.6141.2.60.35.1.7.1
The (conceptual) table listing the configuration parameters for the CFM MEP table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosCfmMEPEntry

wwpLeosCfmMEPEntry 1.3.6.1.4.1.6141.2.60.35.1.7.1.1
An entry (conceptual row) in the wwpLeosCfmMEPTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosCfmMEPEntry  

wwpLeosCfmMEPPort 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.1
This object is used as index in the table and is used to specify the port id.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

wwpLeosCfmMEPAdminState 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.2
This object is used to specify the admin state of CFM MEP.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

wwpLeosCfmMEPOperState 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.3
This object is obsolete and should not be used.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

wwpLeosCfmMEPDirection 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.4
This object is used to specify the MEP direction of the service. This object can only be set if wwpLeosCfmServiceIndex is of type vlan.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER up(1), down(2)  

wwpLeosCfmMEPCCMState 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.5
This object specifies the CCM transmission for the service specified by wwpLeosCfmServiceType.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

wwpLeosCfmMEPCCMPriority 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.6
This object specified the priority of CCM messages transmitted.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

wwpLeosCfmMEPLTMPriority 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.7
This object specifies the priority received on the given service and port.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

wwpLeosCfmMEPId 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.8
This object specifies the mep id for the given service and port.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..8191  

wwpLeosCfmMEPMacAddr 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.9
This object specifies the mac address received on the given service and port..
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

wwpLeosCfmMEPNextLbmSeqNumber 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.10
This object specifies the next lbm sequence number received on the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmMEPRxValidInOrderLoopbackReply 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.11
The total valid in order loopback replies received on the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmMEPRxValidOutOrderLoopbackReply 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.12
This object specifies the total valid out of order loopback replies received on the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmMEPNextLTMSeqNumber 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.13
This object specifies the next LTM serquence number received on the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmMEPNumLoopbackRepliesTxmt 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.14
This object specifies the flags total loopback replies transmitted on the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmMEPNumLTMReceived 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.15
This object specifies the total LTM messages received on the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmMEPNumLTMTxmt 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.16
The total LTM transmitted on the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmMEPNumCCMTxmt 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.17
This object specifies the total CCM messages transmitted on the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmMEPRowStatus 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.18
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, set this to 'destroy'.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

wwpLeosCfmMEPNumDMMSent 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.19
This object specifies the total delay measurement messages transmitted on the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmMEPDMMDelay 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.20
This object specifies the average delay in microseconds measured during the last DMM performance test on the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmMEPDMMJitter 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.21
This object specifies the average jitter in microseconds measured during the last DMM performance test on the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmMEPNumLMMSent 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.22
The total frame loss measurement messages transmitted during the last test performed on the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmMEPLMMFrameLossNear 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.23
This object specifies the number of lost frames on the near side measured during the last LMM performance test on the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmMEPLMMFrameLossFar 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.24
This object specifies the number of lost frames on the far side measured during the last LMM performance test on the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmMEPNumLMRReceived 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.25
This object specifies the total number of frame loss measurement replies received during the last test performed on the given service and port. If this count is zero, the near and far frame loss counts are probably invalid as connectivity to the device being tested was not available.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmMEPNumDMRReceived 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.26
This object specifies the total number of delay measurement replies received during the last test performed on the given service and port. If this count is not equal to the number of delay measurement frames sent, the jitter and delay are probably invalid as connectivity to the device being tested was not stable.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmMEPDMMMinDelay 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.27
The minimum delay in microseconds measured during the last DMM performance test on the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmMEPDMMMaxDelay 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.28
The maximum delay in microseconds measured during the last DMM performance test on the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmMEPDMMMinJitter 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.29
The minimum jitter in microseconds measured during the last DMM performance test on the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmMEPDMMMaxJitter 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.30
The maximum jitter in microseconds measured during the last DMM performance test on the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmMEPServiceName 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.50
This object is used to specify the service name assigned to this port.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

wwpLeosCfmMEPSubPortName 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.51
This object represents the sub-port name assigned to the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

wwpLeosCfmMEPVsPbtName 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.52
This object represents the virtual switch or Pbt tunnel assigned to the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

wwpLeosCfmMEPLogicalPortName 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.53
This object represents the logical port name assigned to the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

wwpLeosCfmMEPSubPortIndex 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.54
This object is used to specify the CFM sub-port index.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosCfmMEPEncapsulation 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.55
This object is used to specify the encapsulation applied to the service and port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ieee802dot1d(1), pbtCfmEncap(2)  

wwpLeosCfmMEPLeadPortBayIndex 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.56
This object is used as to specify the agent bay that MEP is in.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..1  

wwpLeosCfmMEPLeadPortShelfIndex 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.57
This object is used as to specify the agent shelf that MEP is in.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..1  

wwpLeosCfmMEPLeadPortModuleIndex 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.58
This object is used as to specify the agent module that MEP is in. Index = 255 is reserved for Lag ports and this this object cannot be set to 255 in this table.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..7 | 255  

wwpLeosCfmMEPPBTBvid 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.59
This object specifies the BVID assigned to the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..8191  

wwpLeosCfmMEPPBTEtype 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.60
This object specifies the E-type assigned to the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..8191  

wwpLeosCfmMEPNumLbmTxmt 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.61
This object specifies the total loopback messages transmitted on the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmMEPNumLbmReceived 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.62
This object specifies the total loopback messages received on the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmMEPNumLoopbackRepliesReceived 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.63
This object specifies the total loopback replies received on the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmMEPNumLTRepliesTxmt 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.64
This object specifies the total link trace replies transmitted on the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmMEPNumLTRepliesReceived 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.65
This object specifies the total link trace replies received on the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmMEPNumUnexpectedLTRepliesReceived 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.66
This object specifies the total unexpected link trace replies received on the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmMEPNumCCMReceived 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.67
This object specifies the total CCM messages received on the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmRemoteMEPTable 1.3.6.1.4.1.6141.2.60.35.1.8.1
The (conceptual) table listing the display parameters for the Remote MEP table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosCfmRemoteMEPEntry

wwpLeosCfmRemoteMEPEntry 1.3.6.1.4.1.6141.2.60.35.1.8.1.1
An entry (conceptual row) in the wwpLeosCfmRemoteMEPTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosCfmRemoteMEPEntry  

wwpLeosCfmRemoteMEPID 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.1
This object is used as index in the table and is used to specify the MEPID.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..100  

wwpLeosCfmRemoteMEPAdminState 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.2
The administrative state of the Remote MEP State Machine.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

wwpLeosCfmRemoteMEPOperState 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.3
The operational state of the Remote MEP State Machine. disabled represents that remote mep is admin disabled. enabled represents that remote mep is operationally enabled hold represents that remote mep is admin enabled but currently in operational hold state holdLocked represents that remote mep is locked in hold state.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2), hold(3), holdLocked(4)  

wwpLeosCfmRemoteMEPTime 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.4
This object is used to specify the time at which the Remote MEP State Machine last entered RMEP_FAILED or RMEP_OK states.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

wwpLeosCfmRemoteMEPMacAddr 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.5
This object is used to specify the MAC address of the remote MEP.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

wwpLeosCfmRemoteMEPKLastMacStatus 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.6
This object is used to specify the last MAC status received.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

wwpLeosCfmRemoteMEPFailureFlag 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.7
This object is used to specify the Remote MEP failure flag.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

wwpLeosCfmRemoteMEPCCMErrorFlag 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.8
This object is used to specify the MEP CCM error flag.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

wwpLeosCfmRemoteMEPRDIErrorFlag 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.9
This object is used to specify the MEP RDI error flag.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

wwpLeosCfmRemoteMEPNumCCMRx 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.10
This object is used to show the number of MEP CCM frames received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmRemoteMEPNumDMMSent 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.11
The number of DMM frames sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmRemoteMEPDelay 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.12
This object is used to show the average Delay in microseconds during the last Delay Measurement test.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmRemoteMEPJitter 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.13
This object is used to show the average Jitter in microseconds during the last Delay Measurement test.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmRemoteMEPNumLMMSent 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.14
This object is used to show the number of LMM frames sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmRemoteMEPFrameLossNear 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.15
This object is used to show the near side Frame Loss during the last Frame Loss Measurement test.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmRemoteMEPFrameLossFar 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.16
This object is used to show the far side Frame Loss during the last Frame Loss Measurement test.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmRemoteMEPNumLMRReceived 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.17
This object is used to show the number of LMR frames received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmRemoteMEPNumCCMLost 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.18
This object is used to show the number of MEP CCM frames lost, as calculated by watching for CCM sequence errors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmRemoteMEPNumDMRReceived 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.19
This object is used to show the number of DMR frames received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmRemoteMEPHoldState 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.20
This object is used to set the remote MEP Hold State
Status: deprecated Access: read-create
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2), locked(3)  

wwpLeosCfmRemoteMEPRowStatus 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.21
This object is used to create entries in remote mep table
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

wwpLeosCfmRemoteMEPCCMComment 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.22
This mib object contains the CCM Comment, if available, that was sent by the remote Ciena device.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..32)  

wwpLeosCfmRemoteMEPBadSequence 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.23
This mib object contains the number of LMR frames received with bad sequence number, for a given service and remote mep.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmRemoteMEPMinDelay 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.24
The minimum Delay in microseconds during the last Delay Measurement test.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmRemoteMEPMaxDelay 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.25
The maximum Delay in microseconds during the last Delay Measurement test.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmRemoteMEPMinJitter 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.26
The minimum jitter in microseconds during the last Delay Measurement test.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmRemoteMEPMaxJitter 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.27
The maximum jitter in microseconds during the last Delay Measurement test.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmRemoteCfmMEPHoldState 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.28
Hold-state for the remote-mep entry.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(1), enable(2), lock(3)  

wwpLeosCfmRemoteMEPServiceClear 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.29
Setting this object to true causes the remote MEP for this service to be re-initialized .
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

wwpLeosCfmRemoteMEPServiceStatisticsClear 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.30
Setting this object to true resets the statistics for the remote MEP for this service.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

wwpLeosCfmRemoteMEPAccelerated 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.49
Specifies if the remote-mep is monitored in the hardware.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

wwpLeosCfmRemoteMEPSubPortName 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.50
The object indicates the unique index for the module.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

wwpLeosCfmRemoteMEPServiceName 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.51
This object is used to specify the Service name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

wwpLeosCfmRemoteMEPBayIndex 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.52
This object is used as to specify the agent bay that MEP is in.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..1  

wwpLeosCfmRemoteMEPShelfIndex 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.53
This object is used as to specify the agent shelf that MEP is in.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..1  

wwpLeosCfmRemoteMEPModuleIndex 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.54
This object is used as to specify the agent module that MEP is in. Index = 255 is reserved for Lag ports and this this object cannot be set to 255 in this table.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..7 | 255  

wwpLeosCfmRemoteMEPPreviousBayIndex 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.55
This object is used as to specify the agent bay that MEP was previously in.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..1  

wwpLeosCfmRemoteMEPPreviousShelfIndex 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.56
This object is used as to specify the agent shelf that MEP was previously in.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..1  

wwpLeosCfmRemoteMEPPreviousModuleIndex 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.57
This object is used as to specify the agent module that MEP was previously in. Index = 255 is reserved for Lag ports and this this object cannot be set to 255 in this table.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..7 | 255  

wwpLeosCfmRemoteMEPLastPortStatus 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.58
This object is used as to specify the remote MEP last port status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), none(2), blocked(3), up(4)  

wwpLeosCfmRemoteMEPLastInterfaceStatus 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.59
This object is used as to specify the remote MEP interface status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), up(2), down(3), testing(4), dormant(5), lowerLayerDown(6), notPresent(7)  

wwpLeosCfmRemoteMEPLastSeqNum 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.60
This object is used to show the tbd.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosCfmRemoteMEPCCMSeqErrors 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.61
This object is used to show the number of MEP CCM frames sequence errors.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosCfmRemoteMEPCCMLevel 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.62
This object is used as to specify the CCM level.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..256  

wwpLeosCfmRemoteMEPDeleteAll 1.3.6.1.4.1.6141.2.60.35.1.8.65
Setting this object to true will delete all remote meps. This object will always return false.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

wwpLeosCfmPortStackTable 1.3.6.1.4.1.6141.2.60.35.1.9.1
The (conceptual) table listing the display parameters for the CFM port stack table.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosCfmPortStackEntry

wwpLeosCfmPortStackEntry 1.3.6.1.4.1.6141.2.60.35.1.9.1.1
An entry (conceptual row) in the wwpLeosCfmPortStackTable.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  WwpLeosCfmPortStackEntry  

wwpLeosCfmPortStackPort 1.3.6.1.4.1.6141.2.60.35.1.9.1.1.1
This object is used as index in the table and is used to specify the port id.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

wwpLeosCfmPortStackVid 1.3.6.1.4.1.6141.2.60.35.1.9.1.1.2
This object is used as index in the table and is used to show the VLAN.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 1..24576  

wwpLeosCfmPortStackType 1.3.6.1.4.1.6141.2.60.35.1.9.1.1.3
This object is used as index in the table and is used to show the type of Maintenance Point.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER mepUp(1), mepDown(2), mip(3)  

wwpLeosCfmPortStackLevel 1.3.6.1.4.1.6141.2.60.35.1.9.1.1.4
This object is used as index in the table and is used to show the level of stack.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Unsigned32 0..7  

wwpLeosCfmPortStackMEPId 1.3.6.1.4.1.6141.2.60.35.1.9.1.1.5
The MEP ID.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 1..100  

wwpLeosCfmExtPortStackTable 1.3.6.1.4.1.6141.2.60.35.1.15.1
The (conceptual) table listing the display parameters for the CFM port stack table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosCfmExtPortStackEntry

wwpLeosCfmExtPortStackEntry 1.3.6.1.4.1.6141.2.60.35.1.15.1.1
An entry (conceptual row) in the wwpLeosCfmPortStackTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosCfmExtPortStackEntry  

wwpLeosCfmExtPortStackVid 1.3.6.1.4.1.6141.2.60.35.1.15.1.1.1
This object is used as index in the table and is used to show the VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..24576  

wwpLeosCfmExtPortStackPort 1.3.6.1.4.1.6141.2.60.35.1.15.1.1.2
This object is used as index in the table and is used to specify the port id.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

wwpLeosCfmExtPortStackType 1.3.6.1.4.1.6141.2.60.35.1.15.1.1.3
This object is used as index in the table and is used to show the type of Maintenance Point.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER mepUp(1), mepDown(2), mip(3)  

wwpLeosCfmExtPortStackLevel 1.3.6.1.4.1.6141.2.60.35.1.15.1.1.4
This object is used as index in the table and is used to show the level of stack.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..7  

wwpLeosCfmExtPortStackMEPId 1.3.6.1.4.1.6141.2.60.35.1.15.1.1.5
The MEP ID.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..100  

wwpLeosCfmMipCCMDbTable 1.3.6.1.4.1.6141.2.60.35.1.10.1
The (conceptual) table listing the display parameters for the MIP CCM Db table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosCfmMipCCMDbEntry

wwpLeosCfmMipCCMDbEntry 1.3.6.1.4.1.6141.2.60.35.1.10.1.1
An entry (conceptual row) in the wwpLeosCfmMipCCMDbTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosCfmMipCCMDbEntry  

wwpLeosCfmMipCCMDbIndex 1.3.6.1.4.1.6141.2.60.35.1.10.1.1.1
This object shows the CCM DB vlan.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..24576  

wwpLeosCfmMipCCMDbVid 1.3.6.1.4.1.6141.2.60.35.1.10.1.1.2
This object shows the CCM DB vlan.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..24576  

wwpLeosCfmMipCCMDbMacAddr 1.3.6.1.4.1.6141.2.60.35.1.10.1.1.3
This object shows the mac address.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

wwpLeosCfmMipCCMDbPort 1.3.6.1.4.1.6141.2.60.35.1.10.1.1.4
This object shows the CCM DB port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

wwpLeosCfmMipCCMDbMEPID 1.3.6.1.4.1.6141.2.60.35.1.10.1.1.5
This object shows the CCM DB MEP ID.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..8191  

wwpLeosCfmMipCCMdbNumCCMRx 1.3.6.1.4.1.6141.2.60.35.1.10.1.1.6
This object shows the number of CCM DB packets received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmMipCCMDbTime 1.3.6.1.4.1.6141.2.60.35.1.10.1.1.7
This object shows the CCM DB time.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

wwpLeosCfmMipCCMDbLastMacStatus 1.3.6.1.4.1.6141.2.60.35.1.10.1.1.8
This object shows the CCM DB last mac status.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

wwpLeosCfmMipCCMDbRDIErrorFlag 1.3.6.1.4.1.6141.2.60.35.1.10.1.1.9
This object shows the CCM DB RDI error flag status.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

wwpLeosCfmServiceFaultTable 1.3.6.1.4.1.6141.2.60.35.1.2.2
The (conceptual) table used for Fault Traps. The last CFM error that occurred is reported.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosCfmServiceFaultEntry

wwpLeosCfmServiceFaultEntry 1.3.6.1.4.1.6141.2.60.35.1.2.2.1
An entry (conceptual row) in the wwpLeosCfmServiceFaultTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosCfmServiceFaultEntry  

wwpLeosCfmServiceFaultTime 1.3.6.1.4.1.6141.2.60.35.1.2.2.1.1
This object is used to specify the Time at which the fault occurred.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

wwpLeosCfmServiceFaultType 1.3.6.1.4.1.6141.2.60.35.1.2.2.1.2
This object is used to specify the type of fault.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), someRDIDefect(2), someMACStatusDefect(3), someRMEPCCMDefect(4), errorCCMDefect(5), xconCCMDefect(6), instability(7)  

wwpLeosCfmServiceFaultDesc 1.3.6.1.4.1.6141.2.60.35.1.2.2.1.3
This object is used to specify the description of the fault.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wwpLeosCfmServiceFaultMep 1.3.6.1.4.1.6141.2.60.35.1.2.2.1.4
This object is used to specify the Mepid of MEP reporting the fault.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..8191  

wwpLeosCfmServiceVlan 1.3.6.1.4.1.6141.2.60.35.1.2.2.1.5
This object is used to specify the service VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

wwpLeosCfmServiceVsPbtName 1.3.6.1.4.1.6141.2.60.35.1.2.2.1.50
This object represents the virtual switch or Pbt tunnel assigned to the given service.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

wwpLeosCfmServiceStatisticsTable 1.3.6.1.4.1.6141.2.60.35.1.2.3
The (conceptual) table listing the configuration parameters for the CFM Service Table. To create an entry in this table, the following criteria must be met: wwpLeosCfmServiceType must be specified. wwpLeosCfmServiceValue must be specified. wwpLeosCfmServiceName must be specified. wwpLeosCfmServiceStatus must be set to createAndGo.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosCfmServiceStatisticsEntry

wwpLeosCfmServiceStatisticsEntry 1.3.6.1.4.1.6141.2.60.35.1.2.3.1
An entry (conceptual row) in the wwpLeosCfmServiceTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosCfmServiceStatisticsEntry  

wwpLeosCfmServiceRxTotalValidFrames 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.1
The total valid Frames received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmServiceRxTotalInvalidFrames 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.2
The total invalid Frames received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmServiceInvalidMessageOverflow 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.3
The total invalid message overflow Frames.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmServiceInvalidPortStatusTLV 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.4
The total invalid Port Status TLVs Frames.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmServiceInvalidInterfaceStatusTLV 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.5
The invalid interface Status TLVs Frames.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmServiceInvalidSenderIDTLV 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.6
The invalid SenderId TLV.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmServiceTxTotalCCM 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.7
The total CCM sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmServiceTotalRxValidCCM 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.8
The total valid CCM received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmServiceTotalRxInSequenceCCM 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.9
The total CCM in sequence received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmServiceTotalRxNotInSequenceCCM 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.10
The total CCM not in sequence received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmServiceTotalRxMDLevelXconCCM 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.11
The total MD Level Xcon CCM received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmServiceTotalRxMAIDXconCCM 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.12
The total MAID Xcon CCM received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmServiceTotalRxMEPIDErrorCCM 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.13
The total MEPID Error CCM received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmServiceTotalRxCCMIntervalErrorCCM 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.14
The total Interval Error CCM received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmServiceTotalRxInvalidCCM 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.15
The total Internal Error CCM received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmServiceTotalTxLTM 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.16
The total Internal Error CCM received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmServiceTotalTxLTR 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.17
The total Internal Error CCM received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmServiceTotalRxValidLTR 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.18
The valid LTR Received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmServiceTotalRxUnexpectedLTR 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.19
The unexpected LTR received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmServiceTotalRxInvalidLTR 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.20
This object specifies invalid LTR received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmServiceTotalRxInvalidRelayActionLTR 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.21
The total invalid relay action LTR received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmServiceTotalRxValidLTM 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.22
The valid LTM received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmServiceTotalTxInvalidLTM 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.23
The total invalid LTM sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmServiceTotalTxLBM 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.24
The total LBM sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmServiceTotalTxLBR 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.25
The total LBR sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmServiceTotalRxInorderLBR 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.26
The total in order LBR received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmServiceTotalRxOutOfOrderLBR 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.27
The toal out of order LBR received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmServiceTotalRxContentMismatchLBR 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.28
The total content mismatch LBR received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmServiceTotalRxUnexpectedLBR 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.29
The total unexpected LBR received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmServiceTotalRxInvalidLBR 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.30
The invalid LBR received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmServiceTotalRxValidLBM 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.31
The valid LBM received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmServiceTotalRxInvalidLBM 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.32
The total invalid LBM received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmServiceTotalTxDMM 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.33
The total DMM sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmServiceTotalTxDMR 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.34
The total DMR sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmServiceTotalRxDMM 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.35
The total DMM received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmServiceTotalRxDMR 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.36
The total DMR received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmServiceTotalTxLMM 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.37
The total LMM sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmServiceTotalTxLMR 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.38
The total LMR sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmServiceTotalRxLMM 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.39
The total LMM received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmServiceTotalRxLMR 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.40
The total LMR received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmServiceStatsClear 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.41
Setting this object to clear will clear statististics for the given service index. This object can't be set to none
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clear(1), none(2)  

wwpLeosCfmServiceClearStats 1.3.6.1.4.1.6141.2.60.35.1.2.4
Setting this object to clear(1) will clear all service level statistics for all services in addition within each mep.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clear(1), none(2)  

wwpLeosCfmDelayMsgTable 1.3.6.1.4.1.6141.2.60.35.1.12.1
The (conceptual) table listing the configuration parameters for the DelayMeasurementMsg.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosCfmDelayMsgEntry

wwpLeosCfmDelayMsgEntry 1.3.6.1.4.1.6141.2.60.35.1.12.1.1
An entry (conceptual row) in the wwpLeosCfmDelayMsgTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosCfmDelayMsgEntry  

wwpLeosCfmDelayMsgPortId 1.3.6.1.4.1.6141.2.60.35.1.12.1.1.1
This object is used to specify the port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

wwpLeosCfmDelayMsgTargetMEPID 1.3.6.1.4.1.6141.2.60.35.1.12.1.1.2
This object is used to specify the MEPID. This object should only be set if wwpLeosCfmDelayMsgTargetMacAddr is not specified else error will be returned.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..8191  

wwpLeosCfmDelayMsgTargetMacAddr 1.3.6.1.4.1.6141.2.60.35.1.12.1.1.3
This object is used to specify the MacAddress to be used when sending link LoopbackMsg. This object should only be set if wwpLeosCfmDelayMsgTargetMEPID is not specified else error will be returned.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

wwpLeosCfmDelayMsgCount 1.3.6.1.4.1.6141.2.60.35.1.12.1.1.4
This object is used to specify the DelayMeasurementMsg count to be used when sending link DelayMeasurementMsg.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 2..600  

wwpLeosCfmDelayMsgPriority 1.3.6.1.4.1.6141.2.60.35.1.12.1.1.5
This object is used to specify the DelayMeasurementMsg priority to be used when sending link DelayMeasurementMsg.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..7  

wwpLeosCfmDelayMsgRowStatus 1.3.6.1.4.1.6141.2.60.35.1.12.1.1.6
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, set this to 'destroy'. If 'destroy' is used and either TargetMacAddr or TargetMEPID is specified, a cancel will be done for any repeating test on those items.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

wwpLeosCfmDelayMsgRepeat 1.3.6.1.4.1.6141.2.60.35.1.12.1.1.7
Used to make the Delay Measurement test a repeating test.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wwpLeosCfmDelayMsgRepeatCount 1.3.6.1.4.1.6141.2.60.35.1.12.1.1.8
The repeat time in minutes for the Delay Measurement test. If zero is specified, the test runs continuously.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..1440  

wwpLeosCfmDelayMsgDelayThreshold 1.3.6.1.4.1.6141.2.60.35.1.12.1.1.9
The fault threshold for the Delay Measurement test, specified in microseconds. A value of -1 disables the generate of faults, 0 or greater will be compared to the average delay result of the test and a fault will be generated if the threshold is exceeded.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER -1..2147483647  

wwpLeosCfmDelayMsgJitterThreshold 1.3.6.1.4.1.6141.2.60.35.1.12.1.1.10
The fault threshold for the Jitter Measurement test, specified in microseconds. A value of -1 disables the generate of faults, 0 or greater will be compared to the average jitter result of the test and a fault will be generated if the threshold is exceeded.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER -1..2147483647  

wwpLeosCfmDelayMsgMaxDelayThreshold 1.3.6.1.4.1.6141.2.60.35.1.12.1.1.11
The fault threshold for the Delay Measurement test, specified in microseconds. A value of -1 disables the generate of faults, 0 or greater will be compared to the maximum delay result of the test and a fault will be generated if the threshold is exceeded.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER -1..2147483647  

wwpLeosCfmDelayMsgMaxJitterThreshold 1.3.6.1.4.1.6141.2.60.35.1.12.1.1.12
The fault threshold for the Jitter Measurement test, specified in microseconds. A value of -1 disables the generate of faults, 0 or greater will be compared to the maximum jitter result of the test and a fault will be generated if the threshold is exceeded.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER -1..2147483647  

wwpLeosCfmFrameLossMsgTable 1.3.6.1.4.1.6141.2.60.35.1.13.1
The (conceptual) table listing the configuration parameters for the FrameLossMeasurementMsg.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosCfmFrameLossMsgEntry

wwpLeosCfmFrameLossMsgEntry 1.3.6.1.4.1.6141.2.60.35.1.13.1.1
An entry (conceptual row) in the wwpLeosCfmFrameLossMsgTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosCfmFrameLossMsgEntry  

wwpLeosCfmFrameLossMsgPortId 1.3.6.1.4.1.6141.2.60.35.1.13.1.1.1
This object is used to specify the port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

wwpLeosCfmFrameLossMsgTargetMEPID 1.3.6.1.4.1.6141.2.60.35.1.13.1.1.2
This object is used to specify the MEPID. This object should only be set if wwpLeosCfmFrameLossMsgTargetMacAddr is not specified else error will be returned.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..8191  

wwpLeosCfmFrameLossMsgTargetMacAddr 1.3.6.1.4.1.6141.2.60.35.1.13.1.1.3
This object is used to specify the MacAddress to be used when sending link LoopbackMsg. This object should only be set if wwpLeosCfmFrameLossMsgTargetMEPID is not specified else error will be returned.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

wwpLeosCfmFrameLossMsgCount 1.3.6.1.4.1.6141.2.60.35.1.13.1.1.4
This object is used to specify the FrameLossMeasurementMsg count to be used when sending link FrameLossMeasurementMsg.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 2..600  

wwpLeosCfmFrameLossMsgPriority 1.3.6.1.4.1.6141.2.60.35.1.13.1.1.5
This object is used to specify the FrameLossMeasurementMsg priority to be used when sending link FrameLossMeasurementMsg.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..7  

wwpLeosCfmFrameLossMsgRowStatus 1.3.6.1.4.1.6141.2.60.35.1.13.1.1.6
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, set this to 'destroy'. If 'destroy' is used and either TargetMacAddr or TargetMEPID is specified, a cancel will be done for any repeating test on those items.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

wwpLeosCfmFrameLossMsgRepeat 1.3.6.1.4.1.6141.2.60.35.1.13.1.1.7
Used to make the Frame Loss Measurement test a repeating test.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wwpLeosCfmFrameLossMsgRepeatCount 1.3.6.1.4.1.6141.2.60.35.1.13.1.1.8
The repeat time in minutes for the Frame Loss Measurement test. If zero is specified, the test runs continuously.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..1440  

wwpLeosCfmFrameLossMsgFlnThreshold 1.3.6.1.4.1.6141.2.60.35.1.13.1.1.9
The fault threshold for the Frame Loss Measurement test. A value of -1 disables the generate of faults, 0 or greater will be compared to the frame loss near result of the test and a fault will be generated if the threshold is exceeded.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER -1..600  

wwpLeosCfmFrameLossMsgFlfThreshold 1.3.6.1.4.1.6141.2.60.35.1.13.1.1.10
The fault threshold for the Frame Loss Measurement test. A value of -1 disables the generate of faults, 0 or greater will be compared to the frame loss far result of the test and a fault will be generated if the threshold is exceeded.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER -1..600  

wwpLeosCfmRemoteMEPCCMLossTable 1.3.6.1.4.1.6141.2.60.35.1.14.1
The (conceptual) table listing the display parameters for the Remote MEP CCM Loss table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosCfmRemoteMEPCCMLossEntry

wwpLeosCfmRemoteMEPCCMLossEntry 1.3.6.1.4.1.6141.2.60.35.1.14.1.1
An entry (conceptual row) in the wwpLeosCfmRemoteMEPCCMLossTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosCfmRemoteMEPCCMLossEntry  

wwpLeosCfmRemoteMEPCCMLossNum 1.3.6.1.4.1.6141.2.60.35.1.14.1.1.1
This object is used as an index into the table and is used to specify the CCM Loss bucket to be returned.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..96  

wwpLeosCfmRemoteMEPCCMLossCount 1.3.6.1.4.1.6141.2.60.35.1.14.1.1.2
Count of the number of CCM's lost during the wwpLeosCfmServiceCCMLossBucketInterval sample period.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

wwpLeosCfmExtLoopbackMsgTable 1.3.6.1.4.1.6141.2.60.35.1.21.3.1
The (conceptual) table listing the configuration parameters for the LoopbackMsg. The following attributes are required to create a LoopbackMsg: -- wwpLeosCfmServiceIndex -- wwpLeosCfmExtLoopbackMsgTargetMEPID or -- wwpLeosCfmExtLoopbackMsgTargetMacAddr -- wwpLeosCfmExtLoopbackMsgCount -- wwpLeosCfmExtLoopbackMsgData -- wwpLeosCfmExtLoopbackMsgPriority -- wwpLeosCfmExtLoopbackMsgAction -- wwpLeosCfmExtLoopbackMsgInterval -- wwpLeosCfmExtLoopbackMsgTimeout -- wwpLeosCfmExtLoopbackMsgLoss
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosCfmExtLoopbackMsgEntry

wwpLeosCfmExtLoopbackMsgEntry 1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1
An entry (conceptual row) in the wwpLeosCfmExtLoopbackMsgTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosCfmExtLoopbackMsgEntry  

wwpLeosCfmExtLoopbackMsgLocalMEPID 1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.1
This object is used to specify the port.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..8191  

wwpLeosCfmExtLoopbackMsgTargetMEPID 1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.2
This object is used to specify the MEPID. This object should only be set if wwpLeosCfmExtLoopbackMsgTargetMacAddr is not specified else error will be returned.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..8191  

wwpLeosCfmExtLoopbackMsgTargetMacAddr 1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.3
This object is used to specify the MacAddress to be used when sending link LoopbackMsg. This object should only be set if wwpLeosCfmExtLoopbackMsgTargetMEPID is not specified else error will be returned.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

wwpLeosCfmExtLoopbackMsgCount 1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.4
This object is used to specify the LoopbackMsg count to be used when sending link LoopbackMsg.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..3000  

wwpLeosCfmExtLoopbackMsgData 1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.5
This object is used to specify the LoopbackMsg data to be used when sending link LoopbackMsg.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..127)  

wwpLeosCfmExtLoopbackMsgPriority 1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.6
This object is used to specify the LoopbackMsg priority to be used when sending link LoopbackMsg.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..7  

wwpLeosCfmExtLoopbackMsgAction 1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.7
This object represents the action for the message (send, clear or cancel). If set to send(1) and if wwpLeosCfmExtLoopbackMsgTargetMacAddr is specified then loopbackMsg is sent to remote Mac. If set to send(1) and if wwpLeosCfmExtLoopbackMsgTargetMEPID is specified then loopbackMsg is sent to remote mepid. If set to clear(2) will clear mep statistics for given service and mepid. If set to cancel(3) will return commit_failed_error.
Status: current Access: read-create
OBJECT-TYPE    
  SendState  

wwpLeosCfmExtLoopbackMsgInterval 1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.8
This object is used to specify the LoopbackMsg interval to be used when sending link LoopbackMsg.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 10..60000  

wwpLeosCfmExtLoopbackMsgTimeout 1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.9
This object is used to specify the LoopbackMsg timeout to be used when sending link LoopbackMsg.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 2000..10000  

wwpLeosCfmExtLoopbackMsgLoss 1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.10
This object is used to display the LoopbackMsg loss count.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..3000  

wwpLeosCfmExtMEPTable 1.3.6.1.4.1.6141.2.60.35.1.21.7.1
The (conceptual) table listing the configuration parameters for the CFM MEP table. To create entry in this table use SNMP multiple set operation. - wwpLeosCfmExtPortId must be specified. - wwpLeosCfmExtVlanId must be specified. - wwpLeosCfmExtMEPRowStatus must be set to 'CreateAndGo'
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosCfmExtMEPEntry

wwpLeosCfmExtMEPEntry 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1
An entry (conceptual row) in the wwpLeosCfmMEPTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosCfmExtMEPEntry  

wwpLeosCfmExtMEPId 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.1
This is used as the index in the table. This object specifies the MEP id for the given service.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32 1..8191  

wwpLeosCfmExtPortId 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.2
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..65535  

wwpLeosCfmExtVlanId 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.3
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..4094  

wwpLeosCfmExtMEPAdminState 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.4
This object is used to specify the admin state of CFM MEP.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

wwpLeosCfmExtMEPOperState 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.5
This object is used to specify the oper state of CFM MEP.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

wwpLeosCfmExtMEPDirection 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.6
This object is used to specify the MEP direction of the service. This object can only be set if wwpLeosCfmServiceIndex is of type VLAN.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER up(1), down(2)  

wwpLeosCfmExtMEPCCMState 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.7
This object specifies the CCM transmission for the service specified by wwpLeosCfmServiceType.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

wwpLeosCfmExtMEPCCMPriority 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.8
This object specified the priority of CCM messages transmitted.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

wwpLeosCfmExtMEPLTMPriority 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.9
The priority received on the given service and MEP.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

wwpLeosCfmExtMEPMacAddr 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.10
The mac address received on the given service and MEP.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

wwpLeosCfmExtMEPNextLbmSeqNumber 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.11
The next lbm sequence number received on the given service and MEP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmExtMEPNextLTMSeqNumber 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.12
The next LTM sequence number received on the given service and MEP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmExtMEPRowStatus 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.13
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, set this to 'destroy'.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

wwpLeosCfmExtMEPDMMDelay 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.14
The average delay in microseconds measured during the last DMM performance test on the given service and MEP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmExtMEPDMMJitter 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.15
The average jitter in microseconds measured during the last DMM performance test on the given service and MEP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmExtMEPLMMFrameLossNear 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.16
The number of lost frames on the near side measured during the last LMM performance test on the given service and MEP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmExtMEPLMMFrameLossFar 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.17
The number of lost frames on the far side measured during the last LMM performance test on the given service and MEP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmExtMEPServiceName 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.50
The service name assigned to this MEP.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..31)  

wwpLeosCfmExtMEPInterfaceName 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.51
The interface name associated with this MEP.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..31)  

wwpLeosCfmExtMEPServiceInstanceName 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.52
The service instance name associated with this MEP.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..31)  

wwpLeosCfmExtMEPLogicalPortName 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.53
Logical port name associated with this MEP.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..31)  

wwpLeosCfmExtMEPTagMode 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.54
Tag-mode for the given mep and service. When on(1) the MEP originates all frames with an additional inner-most tag. On a down MEP this is the CVLAN tag.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

wwpLeosCfmExtMEPTagVID 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.55
VLAN ID for the additional tag given mep and service.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..4095  

wwpLeosCfmExtMEPTagPriority 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.56
The priority encoded in the additional tag.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

wwpLeosCfmExtMEPLMMBadSequence 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.57
This object specifes the number of frames with bad sequence numbers measured during the last LMM performance test on the given service and MEP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmExtMEPCCMComment 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.58
This mib object allows to set the MEP CCM Comment.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..32)  

wwpLeosCfmExtMEPLMMMissingSequence 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.59
This object specifes the number of frames with missing sequence numbers measured during the last LMM performance test on the given service and MEP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmExtMEPBlockOppositeFaultCurrent 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.60
The number of frames seen in the current sample window.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmExtMEPBlockOppositeFaultThreshold 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.61
The number of frames to block before generating a fault.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

wwpLeosCfmExtMEPBlockOppositeFaultTime 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.62
The frame sample window size in minutes.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..3600  

wwpLeosCfmExtMEPDMMMinDelay 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.63
The minimum delay in microseconds measured during the last DMM performance test on the given service and MEP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmExtMEPDMMMaxDelay 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.64
The maximum delay in microseconds measured during the last DMM performance test on the given service and MEP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmExtMEPDMMMinJitter 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.65
The minimum jitter in microseconds measured during the last DMM performance test on the given service and MEP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmExtMEPDMMMaxJitter 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.66
The maximum jitter in microseconds measured during the last DMM performance test on the given service and MEP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosCfmExtMEPAccelerated 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.67
Specifies if the mep is monitored in hardware.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

wwpLeosCfmExtMEPStatsTable 1.3.6.1.4.1.6141.2.60.35.1.21.7.2
The (conceptual) table listing the configuration parameters for the CFM MEP table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosCfmExtMEPStatsEntry

wwpLeosCfmExtMEPStatsEntry 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1
An entry (conceptual row) in the wwpLeosCfmMEPTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosCfmExtMEPStatsEntry  

wwpLeosCfmExtMEPStatsTotalValidFramesReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.1
This object specifies total valid frames received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPStatsTotalInvalidFramesReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.2
This object specifies total invalid frames received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPStatsTotalInvalidMessageOverflowReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.3
This object specifies total invalid message overflow frames received
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPStatsInvalidPortStatusTLVReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.4
This object specifies total invalid port status TLVs received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPStatsInvalidInterfaceStatusTLVReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.5
This object specifies total invalid interface status TLVs received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPStatsInvalidSenderIDTLVReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.6
This object specifies total invalid senderID frames received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPStatsCCMTxmt 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.7
This object specifies total CCM sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPStatsValidCCMReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.8
This object specifies total valid CCMs received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPStatsCCMInSequenceReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.9
This object specifies total CCM received in sequence.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPStatsCCMSequenceErrorsReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.10
This object specifies total not in sequence received CCMs.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPStatsMDLevelXconCCMReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.11
This object specifies Xcon CCMs received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPStatsMAIDXconCCMReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.12
This object specifies MAID Xcon CCMs.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPStatsIntervalErrorCCMReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.13
This object specifies Interval Error CCM received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPStatsRxInvalidCCM 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.14
This object specified invalid CCMs received
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPStatsLBMTxmt 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.15
This object specifies number of LBM sent
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPStatsLBRTxmt 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.16
This object specifies number of LBR sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPStatsInOrderLBRReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.17
This object specifies number of in order LBR received
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPStatsOutOfOrderLBRReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.18
This object specifies Out of order LBR received
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPStatsContentMismatchLBRReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.19
This object specifies number of content mismatch LBR received
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPStatsUnexpectedLBRReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.20
This object specifies unexpected LBR received
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPStatsInvalidLBRReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.21
This object specifies invalid LBR Received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPStatsLTMTxmt 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.22
This object specifies number of LTM sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPStatsValidLTMReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.23
This object specifies total valid LTM received
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPStatsTotalInvalidLTMReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.24
This object specifies total invalid LTM received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPStatsInvalidLTRAction 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.25
This object specifies total invalid LTR action.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPStatsLTRTxmt 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.26
This object specifies total LTR sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPStatsLTRReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.27
This object specifies unexpected LTR sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPStatsDMMTxmt 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.28
This object specifies total DMM sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPStatsDMMReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.29
This object specifies total DMM received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPStatsDMRTxmt 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.30
This object specifies total DMR sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPStatsDMRReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.31
This object specifies total DMR received
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPStatsDMReplyTimeout 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.32
This object specifies DMR Timeout.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPStatsLMMTxmt 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.33
This object specifies total LMM Sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPStatsLMMReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.34
This object specifies total LMM received
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPStatsLMRTxmt 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.35
This object specifies total LMR sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPStatsLMRReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.36
This object specifies total LMR Received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPStatsLMRTimeout 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.37
This object specifies total LMR Timeout.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPStatsMepIdErrorCCMReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.38
This object specifies total MEPID Error CCM Received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPStatsClear 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.40
Setting this object to clear will clear MEP stats for the given service and MepId. This object can't be set to none
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clear(1), none(2)  

wwpLeosCfmExtMEPStatsValidLBMReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.41
This object specifies Valid LBM Received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPStatsInvalidLBMReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.42
This object specifies total invalid LBM Received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPStatsUnexpectedLTRReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.43
This object specifies total unexpected LTR Received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPStatsInvalidDMMReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.44
This object specifies total invalid DMM Received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPStatsInvalidDMRReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.45
This object specifies total invalid DMR Received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPStatsUnexpectedDMRReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.46
This object specifies total unexpected DMR Received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPStatsInvalidLMMReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.47
This object specifies total invalid LMM Received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPStatsInvalidLMRReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.48
This object specifies total invalid LMR Received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPStatsInvalidBlockedOppositeMep 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.49
This object specifies total invalid frames blocked by opposite MEP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPLastStatsTable 1.3.6.1.4.1.6141.2.60.35.1.21.7.3
The (conceptual) table listing the configuration parameters for the CFM MEP table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosCfmExtMEPLastStatsEntry

wwpLeosCfmExtMEPLastStatsEntry 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1
An entry (conceptual row) in the wwpLeosCfmMEPTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosCfmExtMEPLastStatsEntry  

wwpLeosCfmExtMEPLastStatsPriority 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.1
This object specifies last LBM Priority
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPLastStatsLBMCount 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.2
This object specifies last LBM Count
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPLastStatsLBMSent 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.3
This object specifies last number LBM sent
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPLastStatsLBMToSend 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.4
This object specifies last LBM to send.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPLastStatsInOrderLBRReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.5
This object specifies last In oder LBR received
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPLastStatsOutOfOrderLBRReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.6
This object specifies last out of order LBR received
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPLastStatsDMMPriority 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.7
This object specifies Last DMM Priority
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPLastStatsDMMTxmt 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.8
This object specifies number of last DMM sent
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPLastStatsDMMReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.9
This object specifies last DMM Received
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPLastStatsDMMDelay 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.10
This object specifies Last DMM Delay.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPLastStatsDMMJitter 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.11
This object specifies last DMM Jitter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPLastStatsLMMPriority 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.12
This object specifies last LMM priority
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPLastStatsLMMTxtm 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.13
This object specifies last LMM sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPLastStatsLMMReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.14
This object specifies number of last LMM received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPLastStatsFrameLossNear 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.15
This object specifies last near Frame Losses
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPLastStatsFrameLossFar 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.16
This object specifies last far Frames Loss
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPLastStatsLTMPriority 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.17
This object specifies last LTM Priority
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPLastStatsLTMSequenceNo 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.18
This object specifies last LTM Sequence number.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPLastStatsLTMInitialTTL 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.19
This object specifies last initial TTL LTM.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPLastStatsFrameLossBadSequence 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.20
This object specifes the number of frames with bad sequence numbers measured during the last LMM performance test on the given service and Mep.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPLastStatsDMMMinDelay 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.21
This object specifies Last DMM Minimum Delay.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPLastStatsDMMMaxDelay 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.22
This object specifies Last DMM Maximum Delay.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPLastStatsDMMMinJitter 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.23
This object specifies last DMM Minimum Jitter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPLastStatsDMMMaxJitter 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.24
This object specifies last DMM Maximum Jitter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

wwpLeosCfmExtMEPClearStatistics 1.3.6.1.4.1.6141.2.60.35.1.21.7.4
Setting this object to clear(1) will clear statistics for all Meps across all services
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clear(1), none(2)  

wwpLeosCfmExtMEPDelayHistoryTable 1.3.6.1.4.1.6141.2.60.35.1.21.7.5
The (conceptual) table listing the Y.1731 Delay History table for the CFM MEP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosCfmExtMEPDelayHistoryEntry

wwpLeosCfmExtMEPDelayHistoryEntry 1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1
An entry (conceptual row) in the wwpLeosCfmMEPDelayHistoryTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosCfmExtMEPDelayHistoryEntry  

wwpLeosCfmExtMEPDelayHistoryIndex 1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.1
This is the history entry index into the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..255  

wwpLeosCfmExtMEPDelayHistoryStatus 1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.2
The status of the test sent on the given service and MEP.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER running(1), done(2), canceled(3), timeout(4)  

wwpLeosCfmExtMEPDelayHistoryInterval 1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.3
The transmit rate of the Y.1731 DMM Frames sent on the given service and MEP.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

wwpLeosCfmExtMEPDelayHistoryPriority 1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.4
The priority of the Y.1731 DMM Frames sent on the given service and MEP.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

wwpLeosCfmExtMEPDelayHistoryMEPId 1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.5
The remote MEP id the test was ran against.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..8191  

wwpLeosCfmExtMEPDelayHistoryNumDMMSent 1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.6
The number of DMM frames sent on the given service and MEP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosCfmExtMEPDelayHistoryNumDMRReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.7
The number of DMR frames received on the given service and MEP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosCfmExtMEPDelayHistoryMinDelay 1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.8
The minimum delay(us) seen on DMR frames received on the given service and MEP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosCfmExtMEPDelayHistoryAveDelay 1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.9
The average delay(us) seen on DMR frames received on the given service and MEP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosCfmExtMEPDelayHistoryMaxDelay 1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.10
The maximum delay(us) seen on DMR frames received on the given service and MEP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosCfmExtMEPDelayHistoryMinJitter 1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.11
The minimum jitter(us) seen on DMR frames received on the given service and MEP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosCfmExtMEPDelayHistoryAveJitter 1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.12
The average jitter(us) seen on DMR frames received on the given service and MEP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosCfmExtMEPDelayHistoryMaxJitter 1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.13
The maximum jitter(us) seen on DMR frames received on the given service and MEP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosCfmExtMEPDelayHistoryStartTime 1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.14
The time the test began on the given service and MEP. The timestamp is the number of seconds since 12AM Jan 1st, 1970
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosCfmExtMEPDelayHistoryStopTime 1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.15
The time the test terminated on the given service and MEP. The timestamp is the number of seconds since 12AM Jan 1st, 1970
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosCfmExtMEPDelayHistoryClear 1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.16
Setting this object to clear will clear MEP delay history for the given service and MepId. This object can't be set to none
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clear(1), none(2)  

wwpLeosCfmExtLinkTraceMsgTable 1.3.6.1.4.1.6141.2.60.35.1.21.8.1
The (conceptual) table listing the configuration parameters for the LinkTraceMsg.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosCfmExtLinkTraceMsgEntry

wwpLeosCfmExtLinkTraceMsgEntry 1.3.6.1.4.1.6141.2.60.35.1.21.8.1.1
An entry (conceptual row) in the wwpLeosCfmLinkTraceMsgTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosCfmExtLinkTraceMsgEntry  

wwpLeosCfmExtLinkTraceMsgLocalMepID 1.3.6.1.4.1.6141.2.60.35.1.21.8.1.1.1
This represent local mepid
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..8191  

wwpLeosCfmExtLinkTraceMsgTargetMEPID 1.3.6.1.4.1.6141.2.60.35.1.21.8.1.1.2
This object is used to specify the target MEPID. This object should only be set if wwpLeosCfmLinkTraceMsgTargetMacAddr is not specified else error will be returned.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..8191  

wwpLeosCfmExtLinkTraceMsgTargetMacAddr 1.3.6.1.4.1.6141.2.60.35.1.21.8.1.1.3
This object is used to specify the target MacAddress to be used when sending link LinkMsg. This object should only be set if wwpLeosCfmLinkTraceMsgTargetMEPID is not specified else error will be returned.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

wwpLeosCfmExtLinkTraceMsgTTL 1.3.6.1.4.1.6141.2.60.35.1.21.8.1.1.4
This object is used to specify the TTL to be used when sending link LinkTraceMsg.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..255  

wwpLeosCfmExtLinkTraceMsgSequenceNumber 1.3.6.1.4.1.6141.2.60.35.1.21.8.1.1.5
This object is used to specify the sequence number in the linkTraceMsg.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

wwpLeosCfmExtLinkTraceMsgPriority 1.3.6.1.4.1.6141.2.60.35.1.21.8.1.1.6
This object is used to specify the priority to be used when sending LinkTraceMsg.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..7  

wwpLeosCfmExtLinkTraceMsgAction 1.3.6.1.4.1.6141.2.60.35.1.21.8.1.1.7
This object represents the action for the message (send, clear or cancel) If set to send(1) and if wwpLeosCfmExtLinkTraceMsgTargetMacAddr is specified then LinkTraceMsg is sent to remote Mac. If set to send(1) and if wwpLeosCfmExtLinkTraceMsgTargetMEPID is specified then LinktraceMsg is sent to remote mepid. If set to clear(2) will clear mep statistics for given service and mepid. If set to cancel(3) will return commit_failed_error.
Status: current Access: read-create
OBJECT-TYPE    
  SendState  

wwpLeosCfmExtLinkTraceMsgReplyTable 1.3.6.1.4.1.6141.2.60.35.1.21.8.2
The (conceptual) table listing the display parameters for the LinkTrace Msg Reply.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosCfmExtLinkTraceMsgReplyEntry

wwpLeosCfmExtLinkTraceMsgReplyEntry 1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1
An entry (conceptual row) in the wwpLeosCfmExtLinkTraceMsgReplyTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosCfmExtLinkTraceMsgReplyEntry  

wwpLeosCfmExtLinkTraceMsgReplyTTL 1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.1
This object is used to specify the TTL of the received LinkTrace msg reply.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

wwpLeosCfmExtLinkTraceMsgReplyTTLIndex 1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.2
This object provides an additional index when multiple LinkTrace messages are received with the same TTL.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..24576  

wwpLeosCfmExtLinkTraceMsgReplySequenceNumber 1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.3
This object is used to specify the sequence number of the received LinkTrace msg reply.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

wwpLeosCfmExtLinkTraceMsgReplyMPMacAddr 1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.4
This object is used to specify the mac address of the MP of received LinkTrace msg reply.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

wwpLeosCfmExtLinkTraceMsgReplyMEPID 1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.5
This object is used to specify the MEP ID of the received LinkTrace msg reply.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

wwpLeosCfmExtLinkTraceMsgReplyTargetMacAddr 1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.6
This object is used to specify the Target Mac address of the received LinkTrace msg reply.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

wwpLeosCfmExtLinkTraceMsgReplyRelayAction 1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.7
This object is used to specify the message reply relay action.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER invalid(1), unknown(2), fdb(3), mpdb(4), noLearn(5), hit(6)  

wwpLeosCfmExtLinkTraceMsgReplyIngressPort 1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.8
This object is used to specify the message reply ingress port.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

wwpLeosCfmExtLinkTraceMsgReplyIngressAction 1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.9
This object is used to specify the message reply ingress action.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), blocked(2), vid(3), down(4), none(5)  

wwpLeosCfmExtLinkTraceMsgReplyEgressPort 1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.10
This object is used to specify the message reply egress port.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

wwpLeosCfmExtLinkTraceMsgReplyEgressAction 1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.11
This object is used to specify the message reply egress action.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), ttl(2), down(3), blocked(4), vid(5), ok(6)  

wwpLeosCfmExtLinkTraceMsgReplyIngressPortStr 1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.12
This MIB object is used to specify the message reply ingress port.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..8)  

wwpLeosCfmExtLinkTraceMsgReplyEgressPortStr 1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.13
This MIB object is used to specify the message reply egress port.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..8)  

wwpLeosCfmExtDelayMsgTable 1.3.6.1.4.1.6141.2.60.35.1.21.12.1
The (conceptual) table listing the configuration parameters for the DelayMeasurementMsg.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosCfmExtDelayMsgEntry

wwpLeosCfmExtDelayMsgEntry 1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1
An entry (conceptual row) in the wwpLeosCfmDelayMsgTable. To send, clear or cancel the message, the corresponding MsgAction needs to be specified. Individual objects in this table cannot be set. To send or cancel a message, the TargetMepID or the TargtetMacAddr objects need to be specified. Clear msgAction clears the counters for the message
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosCfmExtDelayMsgEntry  

wwpLeosCfmExtDelayMsgLocalMEPId 1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.1
This object is used to specify the local MEPId.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..65535  

wwpLeosCfmExtDelayMsgTargetMEPID 1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.2
This object is used to specify the MEPID. This object should only be set if wwpLeosCfmExtDelayMsgTargetMacAddr is not specified else error will be returned.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..8191  

wwpLeosCfmExtDelayMsgTargetMacAddr 1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.3
This object is used to specify the MacAddress to be used when sending link LoopbackMsg. This object should only be set if wwpLeosCfmExtDelayMsgTargetMEPID is not specified else error will be returned.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

wwpLeosCfmExtDelayMsgCount 1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.4
This object is used to specify the DelayMeasurementMsg count to be used when sending link DelayMeasurementMsg. Counts between 2 and 600 are valid. The system default count will be used if a value of 0 is entered.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0 | 2..600  

wwpLeosCfmExtDelayMsgPriority 1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.5
This object is used to specify the DelayMeasurementMsg priority to be used when sending link DelayMeasurementMsg.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..7  

wwpLeosCfmExtDelayMsgRepeat 1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.8
Used to make the Delay Measurement test a repeating test.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wwpLeosCfmExtDelayMsgRepeatCount 1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.9
The repeat time in minutes for the Delay Measurement test. If zero is specified, the test runs continuously.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..1440  

wwpLeosCfmExtDelayMsgDelayThreshold 1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.41
Represents the fault Threshold for the average delay, specified in microseconds. A value of -1 disables the generatation of faults, 0 or greater will be compared to the average delay result of the test and a fault will be generated if the threshold is exceeded.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER -1..65535  

wwpLeosCfmExtDelayMsgJitterThreshold 1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.42
Represents the fault threshold value for the average Jitter, specified in microseconds. A value of -1 disables the generation of faults, 0 or greater will be compared to the average jitter result of the test and a fault will be generated if the threshold is exceeded.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER -1..65535  

wwpLeosCfmExtDelayMsgAction 1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.43
This object represents the action for the message (send, clear or cancel) If set to send(1) and if wwpLeosCfmExtDelayMsgTargetMacAddr is specified then loopbackMsg is sent to remote Mac. If set to send(1) and if wwpLeosCfmExtDelayMsgTargetMEPID is specified then loopbackMsg is sent to remote mepid. If set to clear(2) will clear mep statistics for given service and mepid. If set to cancel(3) and if wwpLeosCfmExtDelayMsgTargetMacAddr is specified then it will cancel sending Delay messages to remoteMac. If set to cancel(3) and if wwpLeosCfmExtDelayMsgTargetMEPID is specified then it will cancel sending Delay messages to remoteMEPID.
Status: current Access: read-create
OBJECT-TYPE    
  SendState  

wwpLeosCfmExtDelayMsgMaxDelayThreshold 1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.44
Represents the Threshold for the maximum Delay, specified in microseconds. A value of -1 disables the generatation of faults, 0 or greater will be compared to the maximum delay result of the test and a fault will be generated if the threshold is exceeded.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER -1..65535  

wwpLeosCfmExtDelayMsgMaxJitterThreshold 1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.45
Represents the threshold value for the maximum Jitter, specified in microseconds. A value of -1 disables the generatation of faults, 0 or greater will be compared to the maximum jitter result of the test and a fault will be generated if the threshold is exceeded.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER -1..65535  

wwpLeosCfmExtFrameLossMsgTable 1.3.6.1.4.1.6141.2.60.35.1.21.13.1
The (conceptual) table listing the configuration parameters for the FrameLossMeasurementMsg.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosCfmExtFrameLossMsgEntry

wwpLeosCfmExtFrameLossMsgEntry 1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1
An entry (conceptual row) in the wwpLeosCfmFrameLossMsgTable. To send, clear or cancel the message, the corresponding MsgAction needs to be specified. Individual objects in this table cannot be set. RowStatus is a read-only field. To send or cancel a message, the TargetMepID or the TargtetMacAddr objects need to be specified. Clear msgAction clears the counters for the message
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosCfmExtFrameLossMsgEntry  

wwpLeosCfmExtFrameLossMsgLocalMEPId 1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.1
This object is used to specify the Local MEPID at teh source.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..65535  

wwpLeosCfmExtFrameLossMsgTargetMEPID 1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.2
This object is used to specify the MEPID. This object should only be set if wwpLeosCfmExtFrameLossMsgTargetMacAddr is not specified else error will be returned.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..8191  

wwpLeosCfmExtFrameLossMsgTargetMacAddr 1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.3
This object is used to specify the MacAddress to be used when sending link LoopbackMsg. This object should only be set if wwpLeosCfmExtFrameLossMsgTargetMEPID is not specified else error will be returned.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

wwpLeosCfmExtFrameLossMsgCount 1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.4
This object is used to specify the FrameLossMeasurementMsg count to be used when sending link FrameLossMeasurementMsg.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 2..600  

wwpLeosCfmExtFrameLossMsgPriority 1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.5
This object is used to specify the FrameLossMeasurementMsg priority to be used when sending link FrameLossMeasurementMsg.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..7  

wwpLeosCfmExtFrameLossMsgRepeat 1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.8
Used to make the Frame Loss Measurement test a repeating test.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wwpLeosCfmExtFrameLossMsgRepeatCount 1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.9
The repeat time in minutes for the Frame Loss Measurement test. If zero is specified, the test runs continuously.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..1440  

wwpLeosCfmExtFrameLossMsgFlnThreshold 1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.10
The fault threshold for the Frame Loss Measurement test. A value of -1 disables the generate of faults, 0 or greater will be compared to the frame loss near result of the test and a fault will be generated if the threshold is exceeded.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER -1..600  

wwpLeosCfmExtFrameLossMsgFlfThreshold 1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.11
The fault threshold for the Frame Loss Measurement test. A value of -1 disables the generate of faults, 0 or greater will be compared to the frame loss far result of the test and a fault will be generated if the threshold is exceeded.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER -1..600  

wwpLeosCfmExtFrameLossMsgAction 1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.12
This object represents the action for the message (send, clear or cancel) This object represents the action for the message (send, clear or cancel) If set to send(1) and if wwpLeosCfmExtFrameLossMacAddr is specified then FrameLoss is sent to remote Mac. If set to send(1) and if wwpLeosCfmExtFrameLossMsgTargetMEPID is specified then FrameLossMsg is sent to remote mepid. If set to clear(2) will clear mep statistics for given service and mepid. If set to cancel(3) and if wwpLeosCfmExtFrameLossMsgTargetMacAddr is specified then it will cancel sending FrameLoss Messages to remoteMac. If set to cancel(3) and if wwpLeosCfmExtFrameLossMsgTargetMEPID is specified then it will cancel sending FrameLoss messages to remoteMEPID.
Status: current Access: read-create
OBJECT-TYPE    
  SendState  

wwpLeosCfmExtFrameLossMsgSeqThreshold 1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.13
The sequence threshold for the Frame Loss Measurement test. A value of -1 disables the generate of faults, 0 or greater will be compared to the frame loss far result of the test and a fault will be generated if the threshold is exceeded.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER -1..600  

wwpLeosCfmExtInterfaceStackTable 1.3.6.1.4.1.6141.2.60.35.1.21.14.1
The (conceptual) table listing the display parameters for the CFM port stack table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosCfmExtInterfaceStackEntry

wwpLeosCfmExtInterfaceStackEntry 1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1
An entry (conceptual row) in the wwpLeosTceCfmPortStackTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosCfmExtInterfaceStackEntry  

wwpLeosCfmExtInterfaceStackServiceInstanceType 1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.1
This object is used to specify the CFM port service type.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER ethVs(1), vlan(2), pbtTunnel(3)  

wwpLeosCfmExtInterfaceStackServiceInstanceIndex 1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.2
A unique identifier for CFM domain entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..65535  

wwpLeosCfmExtInterfaceStackInterfaceType 1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.3
This object is used to specify the CFM interface type.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER logicalPort(1), pbtEncap(2), pbtDecap(3), none(99)  

wwpLeosCfmExtInterfaceStackInterfaceIndex 1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.4
This object is used to specify the CFM sub port index.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

wwpLeosCfmExtInterfaceStackLevel 1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.5
This object is used to specify the CFM interface level.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..7  

wwpLeosCfmExtInterfaceStackStackType 1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.6
This object is used to specify the CFM interface type.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER mepUp(1), mepDown(2), mipUp(3), mipDown(4)  

wwpLeosCfmExtInterfaceStackInterfaceName 1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.7
This object is used to specify the CFM interface name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

wwpLeosCfmExtInterfaceStackServiceInstanceName 1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.8
This object is used to specify the CFM interface name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

wwpLeosCfmExtInterfaceStackPortName 1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.9
This object is used to specify the CFM interface port name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

wwpLeosCfmExtInterfaceStackOperState 1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.10
This object is used to specify the CFM interface oper state.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

wwpLeosCfmExtInterfaceStackVid 1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.11
This object is used to specify the CFM interface vid.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..4094  

wwpLeosCfmExtInterfaceStackPgid 1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.12
This object is used to specify the CFM interface pgid.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosCfmExtInterfaceStackMEPId 1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.13
This object is used to specify the CFM interface mepid.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..8191  

wwpLeosCfmExtInterfaceStackMacAddress 1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.14
This object is used to specify the CFM interface macaddress.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

wwpLeosCfmExtMipTable 1.3.6.1.4.1.6141.2.60.35.1.21.15.1
The (conceptual) table listing the configuration parameters for the CFM Ext MIP Table. This table is not applicable if wwpLeosCfmServiceType is set to pbtTunnel. Any Get/Set/Walk will return error.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosCfmExtMipEntry

wwpLeosCfmExtMipEntry 1.3.6.1.4.1.6141.2.60.35.1.21.15.1.1
An entry (conceptual row) in the wwpLeosCfmExtMipTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosCfmExtMipEntry  

wwpLeosCfmExtMipVid 1.3.6.1.4.1.6141.2.60.35.1.21.15.1.1.1
This object is used as index in the table and is used to specify the VLAN service type for which intermediate maintenance points can be created.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..24576  

wwpLeosCfmExtMipPort 1.3.6.1.4.1.6141.2.60.35.1.21.15.1.1.2
This object is used as index in the table and is used to specify the port.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..65535  

wwpLeosCfmExtMipLevel 1.3.6.1.4.1.6141.2.60.35.1.21.15.1.1.3
The level attribute.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..7  

wwpLeosCfmExtMipStatus 1.3.6.1.4.1.6141.2.60.35.1.21.15.1.1.4
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, set it to 'destroy'.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

wwpLeosCfmExtInterfaceMipTable 1.3.6.1.4.1.6141.2.60.35.1.21.16.1
The (conceptual) table listing the configuration parameters for the CFM Ext MIP SI Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosCfmExtInterfaceMipEntry

wwpLeosCfmExtInterfaceMipEntry 1.3.6.1.4.1.6141.2.60.35.1.21.16.1.1
An entry (conceptual row) in the wwpLeosCfmExtInterfaceMipTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosCfmExtInterfaceMipEntry  

wwpLeosCfmExtInterfaceMipServiceInstanceType 1.3.6.1.4.1.6141.2.60.35.1.21.16.1.1.1
This object is used to specify the service instance type. Interpretation of wwpLeosCfmExtInterfaceMipServiceInstanceIndex depends on the value of this MIB object.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER ethVs(1), vlan(2), pbtTunnel(3)  

wwpLeosCfmExtInterfaceMipServiceInstanceIndex 1.3.6.1.4.1.6141.2.60.35.1.21.16.1.1.2
This object is used to specify the service instance index. Interpretation of this object depends on the value of wwpLeosCfmExtInterfaceMipServiceInstanceType.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..65535  

wwpLeosCfmExtInterfaceMipInterfaceType 1.3.6.1.4.1.6141.2.60.35.1.21.16.1.1.3
This object is used to specify the CFM interface type.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER none(0), portVlan(1), pbtEncap(2), pbtDecap(3)  

wwpLeosCfmExtInterfaceMipInterfaceIndex 1.3.6.1.4.1.6141.2.60.35.1.21.16.1.1.4
This object is used to specify an interface index. When the value of object wwpLeosCfmExtInterfaceMipInterfaceType is portVlan this obect refers to a port.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

wwpLeosCfmExtInterfaceMipInterfaceSubIndex 1.3.6.1.4.1.6141.2.60.35.1.21.16.1.1.5
This object is used to specify a sub interface index. When the value of object wwpLeosCfmExtInterfaceMipInterfaceType is portVlan this obect refers to a vlan.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

wwpLeosCfmExtInterfaceMipLevel 1.3.6.1.4.1.6141.2.60.35.1.21.16.1.1.6
The level attribute.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..7  

wwpLeosCfmExtInterfaceMipStatus 1.3.6.1.4.1.6141.2.60.35.1.21.16.1.1.7
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, set it to 'destroy'.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

wwpLeosCfmExtOamPortTable 1.3.6.1.4.1.6141.2.60.35.1.21.17.1
The (conceptual) table listing if a port is OAM capable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosCfmExtOamPortEntry

wwpLeosCfmExtOamPortEntry 1.3.6.1.4.1.6141.2.60.35.1.21.17.1.1
An entry (conceptual row) in the wwpLeosCfmExtOamPortTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosCfmExtOamPortEntry  

wwpLeosCfmExtOamPortIndex 1.3.6.1.4.1.6141.2.60.35.1.21.17.1.1.1
Specifies the port index.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..3072  

wwpLeosCfmExtOamPortSupported 1.3.6.1.4.1.6141.2.60.35.1.21.17.1.1.2
Specifies if the port is OAM capable.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

wwpLeosTceCfmMIBObj 1.3.6.1.4.1.6141.2.60.35.1.20
OBJECT IDENTIFIER    

wwpLeosTceCfmMIP 1.3.6.1.4.1.6141.2.60.35.1.20.1
OBJECT IDENTIFIER    

wwpLeosTceCfmLoopback 1.3.6.1.4.1.6141.2.60.35.1.20.3
OBJECT IDENTIFIER    

wwpLeosTceCfmStack 1.3.6.1.4.1.6141.2.60.35.1.20.5
OBJECT IDENTIFIER    

wwpLeosTceCfmMEP 1.3.6.1.4.1.6141.2.60.35.1.20.7
OBJECT IDENTIFIER    

wwpLeosTceCfmDelay 1.3.6.1.4.1.6141.2.60.35.1.20.12
OBJECT IDENTIFIER    

wwpLeosTceCfmFrameLoss 1.3.6.1.4.1.6141.2.60.35.1.20.13
OBJECT IDENTIFIER    

wwpLeosTceCfmMipCCMDb 1.3.6.1.4.1.6141.2.60.35.1.20.14
OBJECT IDENTIFIER    

wwpLeosTceCfmMipTable 1.3.6.1.4.1.6141.2.60.35.1.20.1.1
The (conceptual) table listing the config parameters for the CFM MIP Table. This table is not applicable if wwpLeosTceCfmServiceType is set to pbtTunnel. Any Get/Set/Walk will return error. Not applicable to 6.x
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosTceCfmMipEntry

wwpLeosTceCfmMipEntry 1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1
An entry (conceptual row) in the wwpLeosTceCfmMipTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosTceCfmMipEntry  

wwpLeosTceCfmMipLiType 1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.1
This object specifies an unique index into the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER subPort(1), pbtService(2), mplsStaticPeMeshVC(3), mplsDynamicPeMeshVC(4), mplsStaticPeSpokeVC(5), mplsDynamicPeSpokeVC(6), mplsStaticMtuSpokeVC(7), mplsDynamicMtuSpokeVC(8), none(99)  

wwpLeosTceCfmMipLiIndex 1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.2
This object specifies an unique index into the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..65535  

wwpLeosTceCfmMipPgid 1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.3
This object is used to specify the port group id.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosTceCfmMipBayIndex 1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.4
This object is used to specify the chassis bay.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..1  

wwpLeosTceCfmMipShelfIndex 1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.5
This object is used to specify the chassis shelf.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..1  

wwpLeosTceCfmMipModuleIndex 1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.6
This object is used to specify the chassis module.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..7 | 255  

wwpLeosTceCfmMipMacAddr 1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.7
This object is used to specify the Mac Address.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

wwpLeosTceCfmMipLevel 1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.8
This object is used to specify the level attribute.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..7  

wwpLeosTceCfmMipStatus 1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.9
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, set it to 'destroy'.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

wwpLeosTceCfmMipLiName 1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.10
Logical interface name associated with the Mip.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wwpLeosTceCfmMipCCMDbTable 1.3.6.1.4.1.6141.2.60.35.1.20.14.1
The (conceptual) table listing the display parameters for the MIP CCM Db table. Not applicable to 6.x
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosTceCfmMipCCMDbEntry

wwpLeosTceCfmMipCCMDbEntry 1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1
An entry (conceptual row) in the wwpLeosCfmMipCCMDbTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosTceCfmMipCCMDbEntry  

wwpLeosTceCfmMipCCMDbIndex 1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.1
Mip CCM database index.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

wwpLeosTceCfmMipCCMDbMacAddr 1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.2
MAC Address
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

wwpLeosTceCfmMipCCMDbServiceName 1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.3
Service Name
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wwpLeosTceCfmMipCCMDbSubPortName 1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.4
SubPort Name
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wwpLeosTceCfmMipCCMdbNumCCMRx 1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.5
Total Received CCMs
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosTceCfmMipCCMDbCCMRxTime 1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.6
CCM Rx Time in ms
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosTceCfmMipCCMDbLevel 1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.7
Level
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

wwpLeosTceCfmMipCCMDbMEPID 1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.8
Mep Id
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..8191  

wwpLeosTceCfmMipRDI 1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.9
RDI
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

wwpLeosTceCfmMipLastPortStatus 1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.10
Last Port Status
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER blocked(1), up(2), none(99)  

wwpLeosTceCfmLoopbackMsgTable 1.3.6.1.4.1.6141.2.60.35.1.20.3.1
The (conceptual) table listing the config parameters for the LoopbackMsg. The following attributes are required to create a LoopbackMsg: -- wwpLeosCfmServiceIndex -- wwpLeosTceCfmLoopbackMsgSubPortIndex -- wwpLeosTceCfmLoopbackMsgTargetMEPID or -- wwpLeosTceCfmLoopbackMsgTargetMacAddr -- wwpLeosTceCfmLoopbackMsgCount -- wwpLeosTceCfmLoopbackMsgData -- wwpLeosTceCfmLoopbackMsgPriority -- wwpLeosTceCfmLoopbackMsgRowStatus Not applicable to 6.x
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosTceCfmLoopbackMsgEntry

wwpLeosTceCfmLoopbackMsgEntry 1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1
An entry (conceptual row) in the wwpLeosTceCfmLoopbackMsgTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosTceCfmLoopbackMsgEntry  

wwpLeosTceCfmLoopbackMsgLocalMEPID 1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.1
This object is used to specify the port.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..8191  

wwpLeosTceCfmLoopbackMsgTargetMEPID 1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.2
This object is used to specify the MEPID. This object should only be set if wwpLeosTceCfmLoopbackMsgTargetMacAddr is not specified else error will be returned.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..8191  

wwpLeosTceCfmLoopbackMsgTargetMacAddr 1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.3
This object is used to specify the MacAddress to be used when sending link LoopbackMsg. This object should only be set if wwpLeosTceCfmLoopbackMsgTargetMEPID is not specified else error will be returned.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

wwpLeosTceCfmLoopbackMsgCount 1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.4
This object is used to specify the LoopbackMsg count to be used when sending link LoopbackMsg.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..20  

wwpLeosTceCfmLoopbackMsgData 1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.5
This object is used to specify the LoopbackMsg data to be used when sending link LoopbackMsg.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..127)  

wwpLeosTceCfmLoopbackMsgPriority 1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.6
This object is used to specify the LoopbackMsg priority to be used when sending link LoopbackMsg.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..7  

wwpLeosTceCfmLoopbackMsgServiceName 1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.7
This object is used to specify the Service used when sending link LoopbackMsg.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..31)  

wwpLeosTceCfmLoopbackMsgSubPortName 1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.8
This object is used to specify the sub-port used when sending link LoopbackMsg.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..31)  

wwpLeosTceCfmLoopbackMsgNextLbmTransId 1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.9
This object is used to specify next LoopbackMsg transaction id.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosTceCfmLoopbackMsgTotalTxLbm 1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.10
This object is used to specify total LoopbackMsg sent.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosTceCfmLoopbackMsgTotalRxLbrIo 1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.11
This object is used to specify total in-order LoopbackMsg received.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosTceCfmLoopbackMsgTotalRxLbrOoo 1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.12
This object is used to specify total out of order LoopbackMsg received.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosTceCfmLoopbackMsgRowStatus 1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.13
Used to manage the creation and deletion of the conceptual rows in this table. To send a LoopbackMsg, a manager must set this object to 'createAndGo'. There is no concept of delete a LoopbackMsg in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

wwpLeosTceCfmLoopbackMsgTotalRxLbrContentMismatch 1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.14
This object is used to specify total content mismatch LoopbackMsg received.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosTceCfmLoopbackMsgTotalRxLbrUnexpected 1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.15
This object is used to specify total unexpected LoopbackMsg received.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosTceCfmPortStackTable 1.3.6.1.4.1.6141.2.60.35.1.20.5.1
The (conceptual) table listing the display parameters for the CFM port stack table. Not applicable to 6.x
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosTceCfmPortStackEntry

wwpLeosTceCfmPortStackEntry 1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1
An entry (conceptual row) in the wwpLeosTceCfmPortStackTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosTceCfmPortStackEntry  

wwpLeosTceCfmPortStackServiceType 1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.1
This object is used to specify the CFM sub-port service type.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER vs(1), pbt(2)  

wwpLeosTceCfmPortStackServiceIndex 1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.2
A unique identifier for CFM domain entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..65535  

wwpLeosTceCfmPortStackSubPortType 1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.3
This object is used to specify the CFM sub-port type.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER vs(1), encapPbt(2), decapPbt(3)  

wwpLeosTceCfmPortStackSubPortIndex 1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.4
This object is used to specify the CFM sub-port index.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

wwpLeosTceCfmPortStackSubPortName 1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.5
This object is used to specify the CFM sub-port name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..31)  

wwpLeosTceCfmPortStackOperState 1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.6
This object is used to specify the CFM sub-port operational state.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), invalid(2), enabled(3), disabled(4), notAuthenticated(5), loopbackTx(6), loopbackRx(7), unequipped(8)  

wwpLeosTceCfmPortStackPgid 1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.7
This object is used to specify the CFM sub-port group id.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosTceCfmPortStackBayIndex 1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.8
This object is used to specify the CFM sub-port agent bay.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..1  

wwpLeosTceCfmPortStackShelfIndex 1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.9
This object is used to specify the CFM sub-port agent shelf.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..1  

wwpLeosTceCfmPortStackModuleIndex 1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.10
This object is used to specify the CFM sub-port agent slot. Index value of 255 is reserved for Lag ports.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..7 | 255  

wwpLeosTceCfmPortStackVsPbtName 1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.11
This object is used to specify the CFM PBT name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..32)  

wwpLeosTceCfmPortStackEgressXformTagValue1 1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.13
This object is used to specify the egress tag value.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosTceCfmPortStackEgressXformTagPriority1 1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.14
This object is used to specify the egress tag priority.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosTceCfmPortStackEgressXformTagEtype1 1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.15
This object is used to specify the egress tag etype.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosTceCfmPortStackEgressXformTagValue2 1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.16
This object is used to specify the egress tag value.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosTceCfmPortStackEgressXformTagPriority2 1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.17
This object is used to specify the egress tag priority.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosTceCfmPortStackEgressXformTagEtype2 1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.18
This object is used to specify the egress tag etype.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosTceCfmPortStackMepCount 1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.19
This object is used to specify the MEP counts in both directions.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosTceCfmPortStackMipLevel 1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.20
This object is used to specify the port stack MIP level.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosTceCfmMEPTable 1.3.6.1.4.1.6141.2.60.35.1.20.7.1
The (conceptual) table listing the config parameters for the CFM MEP table. Not applicable to 6.x
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosTceCfmMEPEntry

wwpLeosTceCfmMEPEntry 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1
An entry (conceptual row) in the wwpLeosCfmMEPTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosTceCfmMEPEntry  

wwpLeosTceCfmMEPId 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.1
This is used as the index in the table.This object specifies the mep id for the given service.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..8191  

wwpLeosTceCfmMEPAdminState 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.2
This object is used to specify the admin state of CFM MEP.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

wwpLeosTceCfmMEPOperState 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.3
This object is used to specify the oper state of CFM MEP.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

wwpLeosTceCfmMEPDirection 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.4
This object is used to specify the MEP direction of the service. This object can only be set if wwpLeosCfmServiceIndex is of type vlan.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER up(1), down(2)  

wwpLeosTceCfmMEPCCMState 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.5
This object specifies the CCM transmission for the service specified by wwpLeosCfmServiceType.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

wwpLeosTceCfmMEPCCMPriority 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.6
This object specified the priority of CCM messages transmitted.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

wwpLeosTceCfmMEPLTMPriority 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.7
This object specifies the priority received on the given service and port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

wwpLeosTceCfmMEPMacAddr 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.8
This object specifies the mac address received on the given service and port..
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

wwpLeosTceCfmMEPNextLbmSeqNumber 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.9
This object specifies the next lbm sequence number received on the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosTceCfmMEPRxValidInOrderLoopbackReply 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.10
This object specifies the total valid in order loopback replies received on the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosTceCfmMEPRxValidOutOrderLoopbackReply 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.11
This object specifies the total valid out of order loopback replies received on the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosTceCfmMEPNextLTMSeqNumber 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.12
This object specifies the next LTM sequence number received on the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosTceCfmMEPNumLoopbackRepliesTxmt 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.13
This object specifies the flags total loopback replies transmitted on the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosTceCfmMEPNumLTMRecevied 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.14
This object specifies the total LTM messages received on the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosTceCfmMEPNumLTMTxmt 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.15
This object specifies the total ltm transmitted on the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosTceCfmMEPNumCCMTxmt 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.16
This object specifies the total CCM messages transmitted on the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosTceCfmMEPRowStatus 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.17
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, set this to 'destroy'.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

wwpLeosTceCfmMEPNumDMMSent 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.18
This object specifies the total delay measurement messages transmitted on the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosTceCfmMEPDMMDelay 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.19
This object specifies the average delay in microseconds measured during the last DMM performance test on the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosTceCfmMEPDMMJitter 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.20
This object specifies the average jitter in microseconds measured during the last DMM performance test on the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosTceCfmMEPNumLMMSent 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.21
This object specifies the total frame loss measurement messages transmitted on the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosTceCfmMEPLMMFrameLossNear 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.22
This object specifies the number of lost frames on the near side measured during the last LMM performance test on the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosTceCfmMEPLMMFrameLossFar 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.23
This object specifies the number of lost frames on the far side measured during the last LMM performance test on the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosTceCfmMEPLiType 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.24
This object specifies Li Type on which the Mep is created.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER vs(1), pbtService(2), mplsStaticPeMeshVC(3), mplsDynamicPeMeshVC(4), mplsStaticPeSpokeVC(5), mplsDynamicPeSpokeVC(6), mplsStaticMtuSpokeVC(7), mplsDynamicMtuSpokeVC(8), none(99)  

wwpLeosTceCfmMEPLiIndex 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.25
This object specifies LiIndex for creating MEP
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

wwpLeosTceCfmMEPServiceName 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.50
This object is used to specify the service name assigned to this port.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

wwpLeosTceCfmMEPSubPortName 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.51
This object represents the sub-port, PbtService or Mpls Vc name assigned to the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

wwpLeosTceCfmMEPVsPbtName 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.52
This object represents the virtual switch or Pbt tunnel assigned to the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

wwpLeosTceCfmMEPLogicalPortName 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.53
This object represents the logical port name assigned to the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

wwpLeosTceCfmMEPSubPortIndex 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.54
This object is used to specify the CFM sub-port index.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

wwpLeosTceCfmMEPEncapsulation 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.55
This object is used to specify the encapsulation applied to the service and port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ieee802dot1d(1), pbtCfmEncap(2)  

wwpLeosTceCfmMEPLeadPortBayIndex 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.56
This object is used as to specify the agent bay that MEP is in.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..1  

wwpLeosTceCfmMEPLeadPortShelfIndex 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.57
This object is used as to specify the agent shelf that MEP is in.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..1  

wwpLeosTceCfmMEPLeadPortModuleIndex 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.58
This object is used as to specify the agent module that MEP is in. Index = 255 is reserved for Lag ports and this this object cannot be set to 255 in this table.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..7 | 255  

wwpLeosTceCfmMEPPBTBvid 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.59
This object specifies the BVID assigned to the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..8191  

wwpLeosTceCfmMEPPBTEtype 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.60
This object specifies the E-type assigned to the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..8191  

wwpLeosTceCfmMEPNumLbmTxmt 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.61
This object specifies the total loopback messages transmitted on the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosTceCfmMEPNumLbmReceived 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.62
This object specifies the total loopback messages received on the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosTceCfmMEPNumLoopbackRepliesReceived 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.63
This object specifies the total loopback replies received on the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosTceCfmMEPNumLTRepliesTxmt 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.64
This object specifies the total link trace replies transmitted on the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosTceCfmMEPNumLTRepliesReceived 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.65
This object specifies the total link trace replies received on the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosTceCfmMEPNumUnexpectedLTRepliesReceived 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.66
This object specifies the total unexpected link trace replies received on the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosTceCfmMEPNumCCMReceived 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.67
This object specifies the total CCM messages received on the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosTceCfmMEPRxContentMismatchLoopbackReply 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.68
This object specifies the total content mismatch loopback replies received on the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosTceCfmMEPRxUnexpectedLoopbackReply 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.69
This object specifies the total unexpected loopback replies received on the given service and port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosTceCfmDelayMsgTable 1.3.6.1.4.1.6141.2.60.35.1.20.12.1
The (conceptual) table listing the config parameters for the DelayMeasurementMsg. Not applicable to 6.x
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosTceCfmDelayMsgEntry

wwpLeosTceCfmDelayMsgEntry 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1
An entry (conceptual row) in the wwpLeosCfmDelayMsgTable. To send, clear or cancel the message, the corresponding MsgAction needs to be specified. Individual objects in this table cannot be set. RowStatus is a read-only field. To send or cancel a message, the TargetMepID or the TargtetMacAddr objects need to be specified. Clear msgAction clears the counters for the message
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosTceCfmDelayMsgEntry  

wwpLeosTceCfmDelayMsgLocalMEPId 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.1
This object is used to specify the local MEPId.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

wwpLeosTceCfmDelayMsgTargetMEPID 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.2
This object is used to specify the MEPID. This object should only be set if wwpLeosTceCfmDelayMsgTargetMacAddr is not specified else error will be returned.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..8191  

wwpLeosTceCfmDelayMsgTargetMacAddr 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.3
This object is used to specify the MacAddress to be used when sending link LoopbackMsg. This object should only be set if wwpLeosTceCfmDelayMsgTargetMEPID is not specified else error will be returned.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

wwpLeosTceCfmDelayMsgCount 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.4
This object is used to specify the DelayMeasurementMsg count to be used when sending link DelayMeasurementMsg.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 2..9000  

wwpLeosTceCfmDelayMsgPriority 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.5
This object is used to specify the DelayMeasurementMsg priority to be used when sending link DelayMeasurementMsg.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..7  

wwpLeosTceCfmDelayMsgRowStatus 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.6
Is a display read-only field only. A row in this table is created by the system when a service and mep is created
Status: current Access: read-only
OBJECT-TYPE    
  RowStatus  

wwpLeosTceCfmDelayMsgRepeatInterval 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.40
Represents the Transmission Period for the Cfm Delay.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..1440  

wwpLeosTceCfmDelayMsgDelayThreshold 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.41
Represents the Threshold for the average delay
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..65535  

wwpLeosTceCfmDelayMsgJitterThreshold 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.42
Represents the threshold value for the Jitter
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..65535  

wwpLeosTceCfmDelayMsgServiceName 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.43
This object is used to specify the service to be used when sending DelayMsg.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..31)  

wwpLeosTceCfmDelayMsgSubPortName 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.44
This object represents the sub-port name where the DelayMsg was sent.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..31)  

wwpLeosTceCfmDelayMsgDelay 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.50
This object represents the Average Delay
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosTceCfmDelayMsgJitter 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.51
This object represents the average jitter
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosTceCfmDelayMsgTotalTxDmm 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.52
This object represents the total Delaymessages transmitted
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosTceCfmDelayMsgTotalRxDmm 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.53
This object represents the total Delaymessages received
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosTceCfmDelayMsgTotalTxDmr 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.54
This object represents the total DMRs transmitted
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosTceCfmDelayMsgTotalRxDmr 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.55
This object represents the total DMRs received
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosTceCfmDelayMsgAction 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.56
This object represents the action for the message (send, clear or cancel)
Status: current Access: read-create
OBJECT-TYPE    
  SendState  

wwpLeosTceCfmDelayMsgMaxDelay 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.57
This object represents the Maximum Delay
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosTceCfmDelayMsgMaxJitter 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.58
This object represents the Maximum jitter
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosTceCfmDelayMsgMaxDelayThreshold 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.59
Represents the threshold for maximum delay
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..65535  

wwpLeosTceCfmDelayMsgMaxJitterThreshold 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.60
Represents the threshold value for maximum Jitter
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..65535  

wwpLeosTceCfmDelayMsgMinDelay 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.61
This object represents the Maximum Delay
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosTceCfmDelayMsgMinJitter 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.62
This object represents the Maximum jitter
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosTceCfmFrameLossMsgTable 1.3.6.1.4.1.6141.2.60.35.1.20.13.1
The (conceptual) table listing the config parameters for the FrameLossMeasurementMsg. Not applicable to 6.x
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosTceCfmFrameLossMsgEntry

wwpLeosTceCfmFrameLossMsgEntry 1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1
An entry (conceptual row) in the wwpLeosCfmFrameLossMsgTable. To send, clear or cancel the message, the corresponding MsgAction needs to be specified. Individual objects in this table cannot be set. RowStatus is a read-only field. To send or cancel a message, the TargetMepID or the TargtetMacAddr objects need to be specified. Clear msgAction clears the counters for the message
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosTceCfmFrameLossMsgEntry  

wwpLeosTceCfmFrameLossMsgLocalMEPId 1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.1
This object is used to specify the Local MEPID at the source.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER 1..65535  

wwpLeosTceCfmFrameLossMsgTargetMEPID 1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.2
This object is used to specify the MEPID. This object should only be set if wwpLeosTceCfmFrameLossMsgTargetMacAddr is not specified else error will be returned.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..8191  

wwpLeosTceCfmFrameLossMsgTargetMacAddr 1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.3
This object is used to specify the MacAddress to be used when sending link LoopbackMsg. This object should only be set if wwpLeosTceCfmFrameLossMsgTargetMEPID is not specified else error will be returned.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

wwpLeosTceCfmFrameLossMsgCount 1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.4
This object is used to specify the FrameLossMeasurementMsg count to be used when sending link FrameLossMeasurementMsg.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 2..600  

wwpLeosTceCfmFrameLossMsgPriority 1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.5
This object is used to specify the FrameLossMeasurementMsg priority to be used when sending link FrameLossMeasurementMsg.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..7  

wwpLeosTceCfmFrameLossMsgRowStatus 1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.6
Is a read-only field. A row in this table is system-generated on creation of cfm service and cfm mep objects
Status: current Access: read-only
OBJECT-TYPE    
  RowStatus  

wwpLeosTceCfmFrameLossMsgRepeatInterval 1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.50
Represents the Transmission Interval for the Frame loss messages
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..1440  

wwpLeosTceCfmFrameLossMsgNearLossThreshold 1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.51
Represents the threshold value for the near-end frame loss
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..600  

wwpLeosTceCfmFrameLossMsgFarLossThreshold 1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.52
Represents the threshold value for the far-end frame loss
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..600  

wwpLeosTceCfmFrameLossMsgServiceName 1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.53
This object is used to specify the service to be used when sending FrameLossMsg (LMM).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..31)  

wwpLeosTceCfmFrameLossMsgSubPortName 1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.54
This object is used to specify the sub-port name to be used when sending FrameLossMsg (LMM).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..31)  

wwpLeosTceCfmFrameLossMsgFrameLossNear 1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.55
This object represents the near-end Frame Loss. For a MEP, near-end Frame loss refers to frame loss associated with the ingress data frames.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosTceCfmFrameLossMsgFrameLossFar 1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.56
This object represents the far-end Frame Loss. For a MEP, far-end Frame loss refers to frame loss associated with the egress data frames.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosTceCfmFrameLossMsgTotalTxLmm 1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.57
This object represents the total LMMs transmitted
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosTceCfmFrameLossMsgTotalRxLmm 1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.58
This object represents the total LMMs received
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosTceCfmFrameLossMsgTotalTxLmr 1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.59
This object represents the total LMRs transmitted
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosTceCfmFrameLossMsgTotalRxLmr 1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.60
This object represents the total LMRs received
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wwpLeosTceCfmFrameLossMsgAction 1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.61
This object represents the action for the message (send, clear or cancel).
Status: current Access: read-create
OBJECT-TYPE    
  SendState  

wwpLeosCfmFaultTrapState 1.3.6.1.4.1.6141.2.60.35.1.11.1
Setting this object to 'disabled' will cause CFM fault traps to be suppressed.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

wwpLeosCfmFaultTrap 1.3.6.1.4.1.6141.2.60.35.2.0.1
A notification is sent whenever the fault is detected.
Status: current Access: read-write
NOTIFICATION-TYPE    

wwpLeosCfmPbtFaultTrap 1.3.6.1.4.1.6141.2.60.35.2.0.2
A notification is sent whenever the fault is detected for a PBT tunnel. wwpLeosCfmServiceType will always be set to pbtTunnel.
Status: deprecated Access: read-write
NOTIFICATION-TYPE    

wwpLeosCfmDelayFaultTrap 1.3.6.1.4.1.6141.2.60.35.2.0.3
A notification is sent whenever the fault is detected during a Delay Measurement test with a fault threshold.
Status: current Access: read-write
NOTIFICATION-TYPE    

wwpLeosCfmJitterFaultTrap 1.3.6.1.4.1.6141.2.60.35.2.0.4
A notification is sent whenever the fault is detected during a Delay Measurement test with a fault threshold.
Status: current Access: read-write
NOTIFICATION-TYPE    

wwpLeosCfmFrameLossNearFaultTrap 1.3.6.1.4.1.6141.2.60.35.2.0.5
A notification is sent whenever the fault is detected during a Frame Loss Measurement test with a fault threshold.
Status: current Access: read-write
NOTIFICATION-TYPE    

wwpLeosCfmFrameLossFarFaultTrap 1.3.6.1.4.1.6141.2.60.35.2.0.6
A notification is sent whenever the fault is detected during a Frame Loss Measurement test with a fault threshold.
Status: current Access: read-write
NOTIFICATION-TYPE    

wwpLeosCfmExtDelayFaultTrap 1.3.6.1.4.1.6141.2.60.35.2.0.7
A notification is sent whenever the fault is detected during a Delay Measurement test with a fault threshold.
Status: current Access: read-write
NOTIFICATION-TYPE    

wwpLeosCfmExtJitterFaultTrap 1.3.6.1.4.1.6141.2.60.35.2.0.8
A notification is sent whenever the fault is detected during a Delay Measurement test with a fault threshold.
Status: current Access: read-write
NOTIFICATION-TYPE    

wwpLeosCfmExtFrameLossNearFaultTrap 1.3.6.1.4.1.6141.2.60.35.2.0.9
A notification is sent whenever the fault is detected during a Frame Loss Measurement test with a fault threshold.
Status: current Access: read-write
NOTIFICATION-TYPE    

wwpLeosCfmExtFrameLossFarFaultTrap 1.3.6.1.4.1.6141.2.60.35.2.0.20
A notification is sent whenever the fault is detected during a Frame Loss Measurement test with a fault threshold.
Status: current Access: read-write
NOTIFICATION-TYPE    

wwpLeosCfmExtFaultTrapSet 1.3.6.1.4.1.6141.2.60.35.2.0.21
A notification is sent whenever the fault is detected.
Status: current Access: read-write
NOTIFICATION-TYPE    

wwpLeosCfmExtFaultTrapClear 1.3.6.1.4.1.6141.2.60.35.2.0.22
A notification is sent whenever the fault is resolved and cleared.
Status: current Access: read-write
NOTIFICATION-TYPE    

wwpLeosCfmBadSequenceFaultTrap 1.3.6.1.4.1.6141.2.60.35.2.0.23
A notification is sent whenever wwpLeosCfmExtMEPLMMBadSequence exceeds wwpLeosCfmExtFrameLossMsgSeqThreshold in a Frame Loss Measurement test.
Status: current Access: read-write
NOTIFICATION-TYPE    

wwpLeosCfmBlockOppositeMEPSetTrap 1.3.6.1.4.1.6141.2.60.35.2.0.24
A notification sent whenever the number of frames blocked by the presence of a MEP of the opposite type exceeds the threshold during the sample window.
Status: current Access: read-write
NOTIFICATION-TYPE    

wwpLeosCfmBlockOppositeMEPClearTrap 1.3.6.1.4.1.6141.2.60.35.2.0.25
A notification sent whenever the number of frames blocked by the presence of a MEP of the opposite type drops below the threshold during the sample window.
Status: current Access: read-write
NOTIFICATION-TYPE    

wwpLeosCfmFaultTrapSet 1.3.6.1.4.1.6141.2.60.35.2.0.10
A notification is sent whenever the fault is detected.
Status: current Access: read-write
NOTIFICATION-TYPE    

wwpLeosCfmFaultTrapClear 1.3.6.1.4.1.6141.2.60.35.2.0.11
A notification is sent whenever the fault is resolved and cleared.
Status: current Access: read-write
NOTIFICATION-TYPE    

wwpLeosCfmDmmTrap 1.3.6.1.4.1.6141.2.60.35.2.0.12
A notification is sent whenever delay average goes above delay-threshold during a delay measurement test, also generated when delay average goes below threshold after going up as a clearing event. Same notification is generated whenever the average jitter goes above Jitter threshold during a delay measurement test and when the maximum delay and jitter go above the maximum delay and jitter thresholds respectively. Also generated when jitter average goes below jitter threshold after going up as a clearing event. When jitter event is generated, wwpLeosTceCfmDelayMsgDelayThreshold and wwpLeosTceCfmDelayMsgDelay varbind values are set to 0. Similarly when max delay event is generated wwpLeosTceCfmDelayMsgMaxJitter and wwpLeosTceCfmDelayMsgMaxJitterThreshold are set to 0 and vice versa
Status: current Access: read-write
NOTIFICATION-TYPE    

wwpLeosCfmLmmTrap 1.3.6.1.4.1.6141.2.60.35.2.0.13
A notification is sent whenever FrameLoss Near average goes above FrameLoss Near threshold during a Frame Loss measurement test. Also generated when FrameLoss Near average goes below FrameLoss Near threshold after going up as a clearing event. Same notification is generated whenever FrameLoss Far Average goes above Frameloss Far threshold value during a Frame Loss measurement test. Also generated when Frameloss Far average goes below Frameloss Far threshold after going up as a clearing event. When FrameLoss Near event is generated wwpLeosTceCfmFrameLossMsgFrameLossFar and wwpLeosTceCfmFrameLossMsgFarLossThreshold varbind values are 0
Status: current Access: read-write
NOTIFICATION-TYPE