WWP-L2-CF-TUNNEL-MIB

File: WWP-L2-CF-TUNNEL-MIB.mib (13939 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC WWP-SMI

Imported symbols

Counter32 TimeTicks Integer32
Unsigned32 OBJECT-TYPE MODULE-IDENTITY
DisplayString MacAddress TEXTUAL-CONVENTION
RowStatus TruthValue wwpModules

Defined Types

VlanId  
A 12-bit VLAN ID used in the VLAN Tag header.
TEXTUAL-CONVENTION    
  INTEGER 1..4094  

WwpL2CFTunnelEntry  
SEQUENCE    
  wwpL2CFTunnelVlanId VlanId
  wwpL2CFTunnelOperStatus INTEGER
  wwpL2CFTunnelAdminStatus INTEGER
  wwpL2CFTunnelPriority INTEGER
  wwpL2CFTunnelRowStatus RowStatus

WwpL2CFTProtocolEntry  
SEQUENCE    
  wwpL2CFTVlanId VlanId
  wwpL2CFTProtocolNum INTEGER
  wwpL2CFTDispositionType INTEGER

WwpL2CFTStatsEntry  
SEQUENCE    
  wwpL2CFTStatsVlanId VlanId
  wwpL2CFTStatsProtocolNum INTEGER
  wwpL2CFTStatsPacketsRx Counter32
  wwpL2CFTStatsTunneledFrames Counter32
  wwpL2CFTStatsDecodedFrames Counter32
  wwpL2CFTStatsDecodedFailed Counter32
  wwpL2CFTStatsPeeredFrames Counter32
  wwpL2CFTStatsDiscardFrames Counter32
  wwpL2CFTStatsTunFrameSubPort Counter32

Defined Values

wwpL2CFTunnelMIB 1.3.6.1.4.1.6141.2.53
This MIB module is for the Layer 2 Control Frame Tunneling in WWP Portal Products
MODULE-IDENTITY    

wwpL2CFTunnelMIBObjects 1.3.6.1.4.1.6141.2.53.1
OBJECT IDENTIFIER    

wwpL2CFTunnel 1.3.6.1.4.1.6141.2.53.1.1
OBJECT IDENTIFIER    

wwpL2CFTunnelMIBNotificationPrefix 1.3.6.1.4.1.6141.2.53.2
OBJECT IDENTIFIER    

wwpL2CFTunnelMIBNotifications 1.3.6.1.4.1.6141.2.53.2.0
OBJECT IDENTIFIER    

wwpL2CFTunnelMIBConformance 1.3.6.1.4.1.6141.2.53.3
OBJECT IDENTIFIER    

wwpL2CFTunnelMIBCompliances 1.3.6.1.4.1.6141.2.53.3.1
OBJECT IDENTIFIER    

wwpL2CFTunnelMIBGroups 1.3.6.1.4.1.6141.2.53.3.2
OBJECT IDENTIFIER    

wwpL2CFTunnelTable 1.3.6.1.4.1.6141.2.53.1.1.1
VLAN table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpL2CFTunnelEntry

wwpL2CFTunnelEntry 1.3.6.1.4.1.6141.2.53.1.1.1.1
table of vlans
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpL2CFTunnelEntry  

wwpL2CFTunnelVlanId 1.3.6.1.4.1.6141.2.53.1.1.1.1.1
802.1Q VLAN ID (1-4094)
Status: current Access: read-only
OBJECT-TYPE    
  VlanId  

wwpL2CFTunnelOperStatus 1.3.6.1.4.1.6141.2.53.1.1.1.1.2
The current operational state of tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER operActive(0), operVlanNotExist(1), operInvalidVlanPortTag(2), operInvalidVlanNumPorts(3), operInvalidCfg(4), operDisabled(5)  

wwpL2CFTunnelAdminStatus 1.3.6.1.4.1.6141.2.53.1.1.1.1.3
The administratively desired status of Layer 2 control frame handling.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

wwpL2CFTunnelPriority 1.3.6.1.4.1.6141.2.53.1.1.1.1.4
The 802.1p packet priority to be assigned to packets associated with this port that do not have an 802.1Q VLAN header.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER p0(0), p1(1), p2(2), p3(3), p4(4), p5(5), p6(6), p7(7)  

wwpL2CFTunnelRowStatus 1.3.6.1.4.1.6141.2.53.1.1.1.1.5
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. The default state for wwpL2CFTunnelAdminStatus will be 'disabled'.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

wwpL2CFTProtocolTable 1.3.6.1.4.1.6141.2.53.1.1.2
The (conceptual) table listing the l2 control frame protocol status tunnels.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpL2CFTProtocolEntry

wwpL2CFTProtocolEntry 1.3.6.1.4.1.6141.2.53.1.1.2.1
The layer 2 control frame protocol tunnel entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpL2CFTProtocolEntry  

wwpL2CFTVlanId 1.3.6.1.4.1.6141.2.53.1.1.2.1.1
802.1Q VLAN ID (1-4094)
Status: current Access: read-only
OBJECT-TYPE    
  VlanId  

wwpL2CFTProtocolNum 1.3.6.1.4.1.6141.2.53.1.1.2.1.2
This object represent the list of protocols the device can support.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER l28021x(1), bridge-grp-addr(2), cdp(3), dtp(4), gvrp(5), lacp(6), marker-protocol(7), oam(8), pagp(9), pvst(10), stp-uplink-fast(11), udld(12), vlanbridge(13), vtp(14), lldp(15)  

wwpL2CFTDispositionType 1.3.6.1.4.1.6141.2.53.1.1.2.1.3
Setting this object to 'discard' will cause wwpL2CFTProtocolNum frames arriving at the specified port to be discarded. NOTE: Setting this to 'peer' will cause the wwpL2CFTProtocolNum frame to be processed in the same manor as 'discard'. Setting this to 'tunnel' will cause the wwpL2CFTProtocolNum frame to be tunneled. The default disposition state of each protocol is controlled by portal application.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER discard(0), peer(1), tunnel(2)  

wwpL2CFTStatsTable 1.3.6.1.4.1.6141.2.53.1.1.3
A table that contains the frame counters for Layer 2 control frame handling.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpL2CFTStatsEntry

wwpL2CFTStatsEntry 1.3.6.1.4.1.6141.2.53.1.1.3.1
A list of Link Aggregation Control Protocol statistics for each port on this device.
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpL2CFTStatsEntry  

wwpL2CFTStatsVlanId 1.3.6.1.4.1.6141.2.53.1.1.3.1.1
802.1Q VLAN ID (1-4094)
Status: current Access: read-only
OBJECT-TYPE    
  VlanId  

wwpL2CFTStatsProtocolNum 1.3.6.1.4.1.6141.2.53.1.1.3.1.2
This object represent the list of protocols the device can support.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER l28021x(1), bridge-grp-addr(2), cdp(3), dtp(4), gvrp(5), lacp(6), marker-protocol(7), oam(8), pagp(9), pvst(10), stp-uplink-fast(11), udld(12), vlanbridge(13), vtp(14)  

wwpL2CFTStatsPacketsRx 1.3.6.1.4.1.6141.2.53.1.1.3.1.3
The number of number of pkts ingressed matching protocol. This value is read-only.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpL2CFTStatsTunneledFrames 1.3.6.1.4.1.6141.2.53.1.1.3.1.4
The number of number of pts that made tunneled. This value is read-only.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpL2CFTStatsDecodedFrames 1.3.6.1.4.1.6141.2.53.1.1.3.1.5
The number of came in tunneled, then restored. This value is read-only.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpL2CFTStatsDecodedFailed 1.3.6.1.4.1.6141.2.53.1.1.3.1.6
The number of failed to untunnel. This value is read-only.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpL2CFTStatsPeeredFrames 1.3.6.1.4.1.6141.2.53.1.1.3.1.7
The number of number of peered packets. This value is read-only.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpL2CFTStatsDiscardFrames 1.3.6.1.4.1.6141.2.53.1.1.3.1.8
The number of number of discarded packets. This value is read-only.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpL2CFTStatsTunFrameSubPort 1.3.6.1.4.1.6141.2.53.1.1.3.1.9
The number of number of tunneled frames received on subscriber port. This value is read-only.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpL2CFTGlobalStats 1.3.6.1.4.1.6141.2.53.1.1.4
OBJECT IDENTIFIER    

wwpL2CFTGlobalStatsPacketsRx 1.3.6.1.4.1.6141.2.53.1.1.4.1
The total number of number of frames ingressed matching protocol. This value is read-only.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpL2CFTGlobalStatsTunneledFrames 1.3.6.1.4.1.6141.2.53.1.1.4.2
The total number of number of frames that made tunneled. This total value is read-only.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpL2CFTGlobalStatsDecodedFrames 1.3.6.1.4.1.6141.2.53.1.1.4.3
The total number of frames that came in tunneled, then restored. This value is read-only.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpL2CFTGlobalStatsDecodedFailed 1.3.6.1.4.1.6141.2.53.1.1.4.4
Specifies the total number of frames that failed to 'untunnel' on the vlan. This value is read-only.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpL2CFTGlobalStatsPeeredFrames 1.3.6.1.4.1.6141.2.53.1.1.4.5
The total number of number of peered frames. This value is read-only.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpL2CFTGlobalStatsDiscardFrames 1.3.6.1.4.1.6141.2.53.1.1.4.6
The total number of number of discarded frames. This value is read-only.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpL2CFTGlobalStatsTunFrameSubPort 1.3.6.1.4.1.6141.2.53.1.1.4.7
The total number of number of tunneled frames received on subscriber port. This value is read-only.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpL2CFTResetStatCounters 1.3.6.1.4.1.6141.2.53.1.1.5
To reset L2 control frame statistic counters , this object should be set to 'reset'. A read on this object should return none(0).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), reset(1)