WS-SW-SNMP-SAVE-MIB

File: WS-SW-SNMP-SAVE-MIB.mib (4114 bytes)

Imported modules

SNMPv2-CONF	SNMPv2-SMI	SNMPv2-TC
WS-SW-SMI

Imported symbols

OBJECT-GROUP	MODULE-COMPLIANCE	Integer32
OBJECT-TYPE	MODULE-IDENTITY	DisplayString
wsSwSnmpSave

Defined Values

wsSwSnmpSaveModule		1.3.6.1.4.1.388.14.2.6.1
Description.
MODULE-IDENTITY

wsSwSnmpSaveSet		1.3.6.1.4.1.388.14.2.6.1.1
Description.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	idle(1), save(2)

wsSwSnmpSaveSavedCfgChangeCounter		1.3.6.1.4.1.388.14.2.6.1.2
This value indicates the number of times the 'save config' was performed through CLI/SNMP/Applet.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wsSwSnmpSaveUserRole		1.3.6.1.4.1.388.14.2.6.1.3
Specifies user privilege level for the currently logged on user.
Status: current	Access: read-write
OBJECT-TYPE
	BITS	monitor(0), helpDesk(1), networkAdmin(2), systemAdmin(3), webUserAdmin(4), superUser(5)

wsSwSnmpSaveStartupConfigStatus		1.3.6.1.4.1.388.14.2.6.1.4
The status of config playback during startup. This tells the user if any of the configuration commands failed.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	success(1), failure(2)

wsSwSnmpSaveStartupConfigErroneousCmdLine		1.3.6.1.4.1.388.14.2.6.1.5
The erroneous line in the startup-config which failed to get applied at bootup.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

wsSwSnmpSaveComformance		1.3.6.1.4.1.388.14.2.6.1.100
OBJECT IDENTIFIER

wsSwSnmpSaveComformances		1.3.6.1.4.1.388.14.2.6.1.100.1
OBJECT IDENTIFIER

wsSwSnmpSaveComformaces		1.3.6.1.4.1.388.14.2.6.1.100.1.1
Description.
Status: current	Access: read-only
MODULE-COMPLIANCE

wsSwSnmpSaveGroups		1.3.6.1.4.1.388.14.2.6.1.100.2
OBJECT IDENTIFIER

wsSwSnmpSaveGroup		1.3.6.1.4.1.388.14.2.6.1.100.2.1
Description.
Status: current	Access: read-only
OBJECT-GROUP

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor