WS-INFRA-DIAG-MIB

File: WS-INFRA-DIAG-MIB.mib (35284 bytes)

Imported modules

SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
WS-INFRA-SMI-MIB

Imported symbols

OBJECT-GROUP MODULE-COMPLIANCE Integer32
Unsigned32 OBJECT-TYPE MODULE-IDENTITY
DisplayString wsInfraDiag

Defined Types

WsInfraHwBuildInfoEntry  
SEQUENCE    
  wsInfraHwBuildInfoModuleIndex INTEGER
  wsInfraHwBuildInfoModuleName DisplayString
  wsInfraHwBuildInfoVersion DisplayString
  wsInfraHwBuildInfoManufacturer DisplayString
  wsInfraHwBuildInfoDesc DisplayString

WsInfraDiagMonitoredFSEntry  
SEQUENCE    
  wsInfraDiagMonitoredFSTableIndex Unsigned32
  wsInfraDiagMonitoredFSName DisplayString
  wsInfraDiagMonitoredFSFreeSpace Unsigned32
  wsInfraDiagMonitoredFSFreeSpacePercent Integer32
  wsInfraDiagMonitoredFSFreeSpaceLimit INTEGER
  wsInfraDiagMonitoredFSSize Integer32
  wsInfraDiagMonitoredFSUsed Integer32
  wsInfraDiagMonitoredFSINodesFree Integer32
  wsInfraDiagMonitoredFSINodesLimit INTEGER

WsInfraDiagTempEntry  
SEQUENCE    
  wsInfraDiagTempIndex INTEGER
  wsInfraDiagTempSensorName DisplayString
  wsInfraDiagTempCurrTemp Integer32
  wsInfraDiagTempMaxTemp INTEGER
  wsInfraDiagTempOverTemp INTEGER
  wsInfraDiagTempMaxTempHysteresis INTEGER

WsInfraDiagFanEntry  
SEQUENCE    
  wsInfraDiagFanIndex INTEGER
  wsInfraDiagFanName DisplayString
  wsInfraDiagFanSpeed INTEGER
  wsInfraDiagFanLowSpeedLimit INTEGER
  wsInfraDiagFanLowSpeedLimitHysteresis INTEGER

WsInfraDiagProcEntry  
SEQUENCE    
  wsInfraDiagProcIndex INTEGER
  wsInfraDiagProcName DisplayString
  wsInfraDiagProcPercentCPU INTEGER
  wsInfraDiagProcPercentMem INTEGER

Defined Values

wsInfraDiagMib 1.3.6.1.4.1.388.14.1.6.1
Description.
MODULE-IDENTITY    

wsInfraDiagTempControl 1.3.6.1.4.1.388.14.1.6.1.1
OBJECT IDENTIFIER    

wsInfraDiagTempCurrentTemp 1.3.6.1.4.1.388.14.1.6.1.1.1
current temperature of the temperature sensor, if there is no temp sensor, it will return 1000.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..450 | 1000  

wsInfraDiagTempHighTemp 1.3.6.1.4.1.388.14.1.6.1.1.2
high temperature of the temperature sensor, if there is no temp sensor, it will return 1000 The user could only set the temp from 0 to 450.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..450 | 1000..1001  

wsInfraDiagTempHighTempHysteresis 1.3.6.1.4.1.388.14.1.6.1.1.3
high temperature hysteresis of the temperature sensor. If there is no temp sensor, it will return 0. the user could only set the high temperature hysteresis 1-100.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..100  

wsInfraDiagFanControl 1.3.6.1.4.1.388.14.1.6.1.2
OBJECT IDENTIFIER    

wsInfraDiagSysFanSpeed 1.3.6.1.4.1.388.14.1.6.1.2.1
system fan speed
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..10000  

wsDiagProcFanSpeed 1.3.6.1.4.1.388.14.1.6.1.2.2
processor fan speed
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..10000  

wsInfraHwBuildInfo 1.3.6.1.4.1.388.14.1.6.1.3
OBJECT IDENTIFIER    

wsInfraHwTotalNum 1.3.6.1.4.1.388.14.1.6.1.3.1
total hardware number in the system
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 1..128  

wsInfraHwBuildInfoTable 1.3.6.1.4.1.388.14.1.6.1.3.2
Shows the system hardware configuration
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WsInfraHwBuildInfoEntry

wsInfraHwBuildInfoEntry 1.3.6.1.4.1.388.14.1.6.1.3.2.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  WsInfraHwBuildInfoEntry  

wsInfraHwBuildInfoModuleIndex 1.3.6.1.4.1.388.14.1.6.1.3.2.1.1
hardware module index
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..32  

wsInfraHwBuildInfoModuleName 1.3.6.1.4.1.388.14.1.6.1.3.2.1.2
Name of the hardware module
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wsInfraHwBuildInfoVersion 1.3.6.1.4.1.388.14.1.6.1.3.2.1.3
Version of the hardware module
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wsInfraHwBuildInfoManufacturer 1.3.6.1.4.1.388.14.1.6.1.3.2.1.4
Name of the hardware component manufacturer
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wsInfraHwBuildInfoDesc 1.3.6.1.4.1.388.14.1.6.1.3.2.1.5
Description of the device/hardware component
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wsInfraResStats 1.3.6.1.4.1.388.14.1.6.1.4
OBJECT IDENTIFIER    

wsInfraResCpuLoad1 1.3.6.1.4.1.388.14.1.6.1.4.1
% of CPU load averaged over 1 min. Precision is to the degree of 0.1 %
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..1000  

wsInfraResCpuLoad5 1.3.6.1.4.1.388.14.1.6.1.4.2
% of CPU load averaged over 5 mins. Precision is to the degree of 0.1 %
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..1000  

wsInfraResCpuLoad15 1.3.6.1.4.1.388.14.1.6.1.4.3
% of CPU load averaged over 15 mins. Precision is to the degree of 0.1 %
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..1000  

wsInfraFreeMemory 1.3.6.1.4.1.388.14.1.6.1.4.4
Amount of free memory available in the system in KB
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

wsInfraRootFSFree 1.3.6.1.4.1.388.14.1.6.1.4.5
Amount of free space available on root file system in KB
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

wsInfraRootFSInodesFree 1.3.6.1.4.1.388.14.1.6.1.4.6
free Inodes available on root file system
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

wsInfraRamFSFree 1.3.6.1.4.1.388.14.1.6.1.4.7
Free space available on RAM file system
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

wsInfraRamFSInodesFree 1.3.6.1.4.1.388.14.1.6.1.4.8
free Inodes available on RAM file system
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

wsInfraFreeFileDesc 1.3.6.1.4.1.388.14.1.6.1.4.9
Number of free file descriptor
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

wsInfraUsedKernBuff32 1.3.6.1.4.1.388.14.1.6.1.4.10
Number of 32 byte kernel buffers used
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wsInfraUsedKernBuff64 1.3.6.1.4.1.388.14.1.6.1.4.11
Number of 64 byte kernel buffers used
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wsInfraUsedKernBuff128 1.3.6.1.4.1.388.14.1.6.1.4.12
Number of 128 byte kernel buffers used
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wsInfraUsedKernBuff256 1.3.6.1.4.1.388.14.1.6.1.4.13
Number of 256 byte kernel buffers used
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wsInfraUsedKernBuff512 1.3.6.1.4.1.388.14.1.6.1.4.14
Number of 512 byte kernel buffers used
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wsInfraUsedKernBuff1024 1.3.6.1.4.1.388.14.1.6.1.4.15
Number of 1024 byte kernel buffers used
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wsInfraUsedKernBuff2048 1.3.6.1.4.1.388.14.1.6.1.4.16
Number of 2048 byte kernel buffers used
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

wsInfraUsedKernBuff4096 1.3.6.1.4.1.388.14.1.6.1.4.17
Number of 4096 byte kernel buffers used
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wsInfraUsedKernBuff8192 1.3.6.1.4.1.388.14.1.6.1.4.18
Number of 8192 byte kernel buffers used
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wsInfraUsedKernBuff16384 1.3.6.1.4.1.388.14.1.6.1.4.19
Number of 16384 byte kernel buffers used
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wsInfraUsedKernBuff32768 1.3.6.1.4.1.388.14.1.6.1.4.20
Number of 32768 byte kernel buffers used
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wsInfraUsedKernBuff65536 1.3.6.1.4.1.388.14.1.6.1.4.21
Number of 65536 byte kernel buffers used
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wsInfraUsedKernBuff131072 1.3.6.1.4.1.388.14.1.6.1.4.22
Number of 131072 byte kernel buffers used
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wsInfraResCpuLoad1MinLimit 1.3.6.1.4.1.388.14.1.6.1.4.23
Limit on CPU load averaged over 1 minute
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..1000  

wsInfraResCpuLoad5MinLimit 1.3.6.1.4.1.388.14.1.6.1.4.24
Limit on CPU load averaged over 5 minutes
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1000  

wsInfraResCpuLoad15MinLimit 1.3.6.1.4.1.388.14.1.6.1.4.25
Limit on CPU load averaged over 15 minutes
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1000  

wsInfraUsedKernBuff32Limit 1.3.6.1.4.1.388.14.1.6.1.4.26
32 byte buffer usage warning limit
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

wsInfraUsedKernBuff64Limit 1.3.6.1.4.1.388.14.1.6.1.4.27
64 byte buffer usage warning limit
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

wsInfraUsedKernBuff128Limit 1.3.6.1.4.1.388.14.1.6.1.4.28
128 byte buffer usage warning limit
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

wsInfraUsedKernBuff256Limit 1.3.6.1.4.1.388.14.1.6.1.4.29
256 byte buffer usage warning limit
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

wsInfraUsedKernBuff512Limit 1.3.6.1.4.1.388.14.1.6.1.4.30
512 byte buffer usage warning limit
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

wsInfraUsedKernBuff1024Limit 1.3.6.1.4.1.388.14.1.6.1.4.31
1024 byte buffer usage warning limit
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

wsInfraUsedKernBuff2048Limit 1.3.6.1.4.1.388.14.1.6.1.4.32
2048 byte buffer usage warning limit
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

wsInfraUsedKernBuff4096Limit 1.3.6.1.4.1.388.14.1.6.1.4.33
4096 byte buffer usage warning limit
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

wsInfraUsedKernBuff8192Limit 1.3.6.1.4.1.388.14.1.6.1.4.34
8192 byte buffer usage warning limit
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

wsInfraUsedKernBuff16384Limit 1.3.6.1.4.1.388.14.1.6.1.4.35
16384 byte buffer usage warning limit
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

wsInfraUsedKernBuff32768Limit 1.3.6.1.4.1.388.14.1.6.1.4.36
32768 byte buffer usage warning limit
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

wsInfraUsedKernBuff65536Limit 1.3.6.1.4.1.388.14.1.6.1.4.37
65536 byte buffer usage warning limit
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

wsInfraUsedKernBuff131072Limit 1.3.6.1.4.1.388.14.1.6.1.4.38
131072 byte buffer usage warning limit
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

wsInfraDiagControl 1.3.6.1.4.1.388.14.1.6.1.6
Used to enable/disable in service diagnostics
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wsInfraDiagPeriod 1.3.6.1.4.1.388.14.1.6.1.7
Period of in service diagnostics in ms
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 100..30000  

wsInfraDiagFanNum 1.3.6.1.4.1.388.14.1.6.1.8
Total number of fans in the system
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..8  

wsInfraDiagTempSensorNum 1.3.6.1.4.1.388.14.1.6.1.9
Total number of temperature sensors in the system
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..8  

wsInfraDiagPlatform 1.3.6.1.4.1.388.14.1.6.1.10
Name of the hardware platform of the switch
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wsInfraDiagMonitoredFSTable 1.3.6.1.4.1.388.14.1.6.1.11
Table of monitored file systems like flash, etc and var.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WsInfraDiagMonitoredFSEntry

wsInfraDiagMonitoredFSEntry 1.3.6.1.4.1.388.14.1.6.1.11.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  WsInfraDiagMonitoredFSEntry  

wsInfraDiagMonitoredFSTableIndex 1.3.6.1.4.1.388.14.1.6.1.11.1.1
Simple Index.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..3  

wsInfraDiagMonitoredFSName 1.3.6.1.4.1.388.14.1.6.1.11.1.2
Name of the monitored File System.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wsInfraDiagMonitoredFSFreeSpace 1.3.6.1.4.1.388.14.1.6.1.11.1.3
Free space currently available in monitored File System.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wsInfraDiagMonitoredFSFreeSpacePercent 1.3.6.1.4.1.388.14.1.6.1.11.1.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

wsInfraDiagMonitoredFSFreeSpaceLimit 1.3.6.1.4.1.388.14.1.6.1.11.1.5
Threshold value for free space available in the monitored File System. If the free space available falls below this value, a notification should get sent out.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..1000  

wsInfraDiagMonitoredFSSize 1.3.6.1.4.1.388.14.1.6.1.11.1.6
Size of monitored File System.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

wsInfraDiagMonitoredFSUsed 1.3.6.1.4.1.388.14.1.6.1.11.1.7
Amount of monitored File System space used.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

wsInfraDiagMonitoredFSINodesFree 1.3.6.1.4.1.388.14.1.6.1.11.1.8
Number of free INodes in monitored File System.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

wsInfraDiagMonitoredFSINodesLimit 1.3.6.1.4.1.388.14.1.6.1.11.1.9
Limit of INodes in monitored File System in %. Precision is to the degree of 0.1%. Only settable on platforms where applicable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..100  

wsInfraDiagTempTable 1.3.6.1.4.1.388.14.1.6.1.12
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WsInfraDiagTempEntry

wsInfraDiagTempEntry 1.3.6.1.4.1.388.14.1.6.1.12.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  WsInfraDiagTempEntry  

wsInfraDiagTempIndex 1.3.6.1.4.1.388.14.1.6.1.12.1.1
Simple Index.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER 1..8  

wsInfraDiagTempSensorName 1.3.6.1.4.1.388.14.1.6.1.12.1.2
Name of temperature sensor. Gives an indication of the location of the sensor on the system.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wsInfraDiagTempCurrTemp 1.3.6.1.4.1.388.14.1.6.1.12.1.3
Current temperature measured by the sensor.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

wsInfraDiagTempMaxTemp 1.3.6.1.4.1.388.14.1.6.1.12.1.4
Upper limit of temperature measured by the sensor. Send out a notification if this is reached.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..2500  

wsInfraDiagTempOverTemp 1.3.6.1.4.1.388.14.1.6.1.12.1.5
Over limit of temperature measured by the sensor. Send out a notification if temp gets above this value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..2500  

wsInfraDiagTempMaxTempHysteresis 1.3.6.1.4.1.388.14.1.6.1.12.1.6
High temperature hysteresis of the sensor.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 10..100  

wsInfraDiagFanTable 1.3.6.1.4.1.388.14.1.6.1.13
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WsInfraDiagFanEntry

wsInfraDiagFanEntry 1.3.6.1.4.1.388.14.1.6.1.13.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  WsInfraDiagFanEntry  

wsInfraDiagFanIndex 1.3.6.1.4.1.388.14.1.6.1.13.1.1
Simple Index.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER 1..6  

wsInfraDiagFanName 1.3.6.1.4.1.388.14.1.6.1.13.1.2
Name of fan. Gives an indication of the location of the fan on the system.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wsInfraDiagFanSpeed 1.3.6.1.4.1.388.14.1.6.1.13.1.3
Speed of fan in rpm
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..15000  

wsInfraDiagFanLowSpeedLimit 1.3.6.1.4.1.388.14.1.6.1.13.1.4
Low speed limit of fan. Send out a notification if speed gets to, or below this value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1000..15000  

wsInfraDiagFanLowSpeedLimitHysteresis 1.3.6.1.4.1.388.14.1.6.1.13.1.5
Low speed limit hysteresis of the fan.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 50..1000  

wsInfraDiagProcTable 1.3.6.1.4.1.388.14.1.6.1.14
Table of top 10 processes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WsInfraDiagProcEntry

wsInfraDiagProcEntry 1.3.6.1.4.1.388.14.1.6.1.14.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  WsInfraDiagProcEntry  

wsInfraDiagProcIndex 1.3.6.1.4.1.388.14.1.6.1.14.1.1
Simple index
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER 1..10  

wsInfraDiagProcName 1.3.6.1.4.1.388.14.1.6.1.14.1.2
Name of proc
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wsInfraDiagProcPercentCPU 1.3.6.1.4.1.388.14.1.6.1.14.1.3
% of CPU used by proc.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..1000  

wsInfraDiagProcPercentMem 1.3.6.1.4.1.388.14.1.6.1.14.1.4
% of memory used by proc.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..1000  

wsInfraDiagRamStats 1.3.6.1.4.1.388.14.1.6.1.15
OBJECT IDENTIFIER    

wsInfraDiagRamStatsTotal 1.3.6.1.4.1.388.14.1.6.1.15.1
Total RAM available in the system
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

wsInfraDiagRamStatsUsed 1.3.6.1.4.1.388.14.1.6.1.15.2
Total RAM used in the system
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

wsInfraDiagRamStatsFree 1.3.6.1.4.1.388.14.1.6.1.15.3
Total RAM not used in the system
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

wsInfraDiagRamStatsPercentFree 1.3.6.1.4.1.388.14.1.6.1.15.4
% of free RAM in system
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..1000  

wsInfraDiagRamStatsPercentFreeLimit 1.3.6.1.4.1.388.14.1.6.1.15.5
Limit of free RAM in system in %.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..250  

wsInfraDiagPktBuffStats 1.3.6.1.4.1.388.14.1.6.1.17
OBJECT IDENTIFIER    

wsInfraDiagPktBuffAlloc 1.3.6.1.4.1.388.14.1.6.1.17.1
Amount of allocated packet buffer in system.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

wsInfraDiagPktBuffUsed 1.3.6.1.4.1.388.14.1.6.1.17.2
Amount of used packet buffer in system.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

wsInfraDiagPktBuffMax 1.3.6.1.4.1.388.14.1.6.1.17.3
Limit on maximum of allocated packet buffer in system.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

wsInfraDiagIpRouteCacheStats 1.3.6.1.4.1.388.14.1.6.1.18
OBJECT IDENTIFIER    

wsInfraDiagIpRouteCacheAlloc 1.3.6.1.4.1.388.14.1.6.1.18.1
Amount of allocated IP route cache in system.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

wsInfraDiagIpRouteCacheUsed 1.3.6.1.4.1.388.14.1.6.1.18.2
Amount of used IP route cache in system.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

wsInfraDiagIpRouteCacheMax 1.3.6.1.4.1.388.14.1.6.1.18.3
Max limit of allocated IP route cache in system.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

wsInfraDiagFileDescStats 1.3.6.1.4.1.388.14.1.6.1.19
OBJECT IDENTIFIER    

wsInfraDiagFileDescInUse 1.3.6.1.4.1.388.14.1.6.1.19.1
Number of file descriptors in use.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

wsInfraDiagFileDescHWM 1.3.6.1.4.1.388.14.1.6.1.19.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

wsInfraDiagFileDescLimit 1.3.6.1.4.1.388.14.1.6.1.19.3
Limit of file descriptors.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..32767  

wsInfraDiagProcNum 1.3.6.1.4.1.388.14.1.6.1.20
Number of procs currently running in the system
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

wsInfraDiagProcMemLimit 1.3.6.1.4.1.388.14.1.6.1.21
Memory limit on processes running in the system.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..1000  

wsInfraDiagMIBConformance 1.3.6.1.4.1.388.14.1.6.1.100
OBJECT IDENTIFIER    

wsInfraDiagMIBCompliances 1.3.6.1.4.1.388.14.1.6.1.100.1
OBJECT IDENTIFIER    

wsInfraDiagMIBCompliance 1.3.6.1.4.1.388.14.1.6.1.100.1.1
diag MIB compliance
Status: current Access: read-write
MODULE-COMPLIANCE    

wsInfraDiagMIBGroups 1.3.6.1.4.1.388.14.1.6.1.100.2
OBJECT IDENTIFIER    

wsInfraMIBDiagGroup 1.3.6.1.4.1.388.14.1.6.1.100.2.1
diag MIB group
Status: current Access: read-write
OBJECT-GROUP    

wsInfraMIBDiagObsoleteGroup 1.3.6.1.4.1.388.14.1.6.1.100.2.2
Description.
Status: obsolete Access: read-write
OBJECT-GROUP