WLSX-HA-MIB

File: WLSX-HA-MIB.mib (21234 bytes)

Imported modules

SNMPv2-TC SNMPv2-SMI SNMPv2-CONF
ARUBA-MIB ARUBA-TC

Imported symbols

TEXTUAL-CONVENTION MODULE-IDENTITY OBJECT-TYPE
snmpModules Integer32 Unsigned32
Counter32 IpAddress Gauge32
NOTIFICATION-TYPE TDomain DisplayString
PhysAddress TAddress TimeInterval
RowStatus StorageType TestAndIncr
MacAddress TruthValue OBJECT-GROUP
wlsxEnterpriseMibModules ArubaEnableValue ArubaHaRole
ArubaHaConnectivityStatus

Defined Types

WlsxHighAvalabilityConfigEntry  
SEQUENCE    
  haProfileName DisplayString
  haMembership DisplayString
  haState ArubaEnableValue
  haRole ArubaHaRole
  haPreemption ArubaEnableValue
  haOversubscription ArubaEnableValue
  haStateSync ArubaEnableValue
  haPresharedKey DisplayString
  haIntercontrollerHbt ArubaEnableValue
  haHbtThreshold Unsigned32
  haHbtInterval Unsigned32

WlsxHighAvalabilityApEntry  
SEQUENCE    
  haActiveAPs Gauge32
  haStandbyAPs Gauge32
  haTotalAPs Gauge32

WlsxIntercontrollerHbtEntry  
SEQUENCE    
  haActiveCtrl DisplayString
  haActiveCtrlIp DisplayString
  haReferenceCnt Gauge32
  haTotalHbtRequestsSent Counter32
  haTotalHbtResponsesRcvd Counter32
  haLastMissedHbtCnt Gauge32
  haLastHbtMissedTime DisplayString

WlsxStateSyncEntry  
SEQUENCE    
  haActivePmkCacheEntries Gauge32
  haReplicatedPmkCacheEntries Gauge32
  haTotalPmkCacheEntries Gauge32
  haActiveKeyCacheEntries Gauge32
  haReplicatedKeyCacheEntries Gauge32
  haTotalKeyCacheEntries Gauge32

WlsxHighAvalabilityTunnelEntry  
SEQUENCE    
  haActiveVapTunnels Gauge32
  haStandbyVapTunnels Gauge32
  haTotalVapTunnels Gauge32
  haAPHbtTunnels Gauge32

Defined Values

wlsxHaMIB 1.3.6.1.4.1.14823.2.2.1.20
This MIB module defines MIB objects which provide information about High Availability on Aruba controller.
MODULE-IDENTITY    

wlsxHighAvalabilityInfoGroup 1.3.6.1.4.1.14823.2.2.1.20.1
OBJECT IDENTIFIER    

wlsxHighAvalabilityTraps 1.3.6.1.4.1.14823.2.2.1.20.2
OBJECT IDENTIFIER    

wlsxHighAvalabilityConfigTable 1.3.6.1.4.1.14823.2.2.1.20.1.1
This Table lists High Avalability configuration on the Aruba controller.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WlsxHighAvalabilityConfigEntry

wlsxHighAvalabilityConfigEntry 1.3.6.1.4.1.14823.2.2.1.20.1.1.1
HA profile config entry
Status: current Access: not-accessible
OBJECT-TYPE    
  WlsxHighAvalabilityConfigEntry  

haProfileName 1.3.6.1.4.1.14823.2.2.1.20.1.1.1.1
The name of the HA profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(0..63)  

haMembership 1.3.6.1.4.1.14823.2.2.1.20.1.1.1.2
The name of the HA profile enabled.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..63)  

haState 1.3.6.1.4.1.14823.2.2.1.20.1.1.1.3
The HA state.
Status: current Access: read-only
OBJECT-TYPE    
  ArubaEnableValue  

haRole 1.3.6.1.4.1.14823.2.2.1.20.1.1.1.4
The HA role of the controller.
Status: current Access: read-only
OBJECT-TYPE    
  ArubaHaRole  

haPreemption 1.3.6.1.4.1.14823.2.2.1.20.1.1.1.5
HA preemption.
Status: current Access: read-only
OBJECT-TYPE    
  ArubaEnableValue  

haOversubscription 1.3.6.1.4.1.14823.2.2.1.20.1.1.1.6
Standby capacity extension.
Status: current Access: read-only
OBJECT-TYPE    
  ArubaEnableValue  

haStateSync 1.3.6.1.4.1.14823.2.2.1.20.1.1.1.7
The HA state sync.
Status: current Access: read-only
OBJECT-TYPE    
  ArubaEnableValue  

haPresharedKey 1.3.6.1.4.1.14823.2.2.1.20.1.1.1.8
The IPSec key for statesync.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(8..32)  

haIntercontrollerHbt 1.3.6.1.4.1.14823.2.2.1.20.1.1.1.9
The state of intercontroller heart beat.
Status: current Access: read-only
OBJECT-TYPE    
  ArubaEnableValue  

haHbtThreshold 1.3.6.1.4.1.14823.2.2.1.20.1.1.1.10
Intercontroller hbt threshold above which it can trigger HA failover.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

haHbtInterval 1.3.6.1.4.1.14823.2.2.1.20.1.1.1.11
The frequency of inter controller heart beat.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wlsxHighAvalabilityApTable 1.3.6.1.4.1.14823.2.2.1.20.1.2
This Table lists High Avalability AP counts on the Aruba controller.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WlsxHighAvalabilityApEntry

wlsxHighAvalabilityApEntry 1.3.6.1.4.1.14823.2.2.1.20.1.2.1
HA AP entry
Status: current Access: not-accessible
OBJECT-TYPE    
  WlsxHighAvalabilityApEntry  

haActiveAPs 1.3.6.1.4.1.14823.2.2.1.20.1.2.1.1
The number of active APs.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

haStandbyAPs 1.3.6.1.4.1.14823.2.2.1.20.1.2.1.2
The number of standby APs.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

haTotalAPs 1.3.6.1.4.1.14823.2.2.1.20.1.2.1.3
The total number of APs.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

wlsxIntercontrollerHbtTable 1.3.6.1.4.1.14823.2.2.1.20.1.3
This Table lists inter controller heart beat status.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WlsxIntercontrollerHbtEntry

wlsxIntercontrollerHbtEntry 1.3.6.1.4.1.14823.2.2.1.20.1.3.1
HA hbt entry
Status: current Access: not-accessible
OBJECT-TYPE    
  WlsxIntercontrollerHbtEntry  

haActiveCtrl 1.3.6.1.4.1.14823.2.2.1.20.1.3.1.1
The IP address of the actve controller(Key).
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(0..64)  

haActiveCtrlIp 1.3.6.1.4.1.14823.2.2.1.20.1.3.1.2
The IP address of the actve controller.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

haReferenceCnt 1.3.6.1.4.1.14823.2.2.1.20.1.3.1.3
The number of standby APs.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

haTotalHbtRequestsSent 1.3.6.1.4.1.14823.2.2.1.20.1.3.1.4
The total number of hbt requests sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

haTotalHbtResponsesRcvd 1.3.6.1.4.1.14823.2.2.1.20.1.3.1.5
The total number of heart beat responses received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

haLastMissedHbtCnt 1.3.6.1.4.1.14823.2.2.1.20.1.3.1.6
The number of heart beat last missed.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

haLastHbtMissedTime 1.3.6.1.4.1.14823.2.2.1.20.1.3.1.7
The timestamp of last missed hbt.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

wlsxStateSyncTable 1.3.6.1.4.1.14823.2.2.1.20.1.4
This Table lists the counts of active/replicated pmk-cache and key-cache entries related to HA state sync.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WlsxStateSyncEntry

wlsxStateSyncEntry 1.3.6.1.4.1.14823.2.2.1.20.1.4.1
HA state sync entry
Status: current Access: not-accessible
OBJECT-TYPE    
  WlsxStateSyncEntry  

haActivePmkCacheEntries 1.3.6.1.4.1.14823.2.2.1.20.1.4.1.1
The number of active pmk cache entries.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

haReplicatedPmkCacheEntries 1.3.6.1.4.1.14823.2.2.1.20.1.4.1.2
The number of replicated pmk cache entries.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

haTotalPmkCacheEntries 1.3.6.1.4.1.14823.2.2.1.20.1.4.1.3
The total number of pmk cache entries.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

haActiveKeyCacheEntries 1.3.6.1.4.1.14823.2.2.1.20.1.4.1.4
The number of active key cache entries.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

haReplicatedKeyCacheEntries 1.3.6.1.4.1.14823.2.2.1.20.1.4.1.5
The nuber of replicated key cache entries.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

haTotalKeyCacheEntries 1.3.6.1.4.1.14823.2.2.1.20.1.4.1.6
The total number of key cache entries.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

wlsxHighAvalabilityTunnelTable 1.3.6.1.4.1.14823.2.2.1.20.1.5
This table lists the total number of High Availability acitve/standby tunnels and AP heart beat tunnels on the Aruba controller.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WlsxHighAvalabilityTunnelEntry

wlsxHighAvalabilityTunnelEntry 1.3.6.1.4.1.14823.2.2.1.20.1.5.1
HA tunnel entry
Status: current Access: not-accessible
OBJECT-TYPE    
  WlsxHighAvalabilityTunnelEntry  

haActiveVapTunnels 1.3.6.1.4.1.14823.2.2.1.20.1.5.1.1
The number of active per VAP GRE tunnels.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

haStandbyVapTunnels 1.3.6.1.4.1.14823.2.2.1.20.1.5.1.2
The number of standby per VAP GRE tunnels.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

haTotalVapTunnels 1.3.6.1.4.1.14823.2.2.1.20.1.5.1.3
The total number of per VAP GRE tunnels.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

haAPHbtTunnels 1.3.6.1.4.1.14823.2.2.1.20.1.5.1.4
The number of AP hbt GRE tunnels.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

wlsxHaTrapObjectsGroup 1.3.6.1.4.1.14823.2.2.1.20.2.1
OBJECT IDENTIFIER    

wlsxHaTrapDefinitionGroup 1.3.6.1.4.1.14823.2.2.1.20.2.2
OBJECT IDENTIFIER    

wlsxHaV4Status 1.3.6.1.4.1.14823.2.2.1.20.2.1.1
This object is used in the traps to indicate the IPv4 status of High Availability.
Status: current Access: read-only
OBJECT-TYPE    
  ArubaEnableValue  

wlsxHaV4Role 1.3.6.1.4.1.14823.2.2.1.20.2.1.2
This object is used in the traps to indicate the IPv4 HA role of the controller.
Status: current Access: read-only
OBJECT-TYPE    
  ArubaHaRole  

wlsxHaV6Status 1.3.6.1.4.1.14823.2.2.1.20.2.1.3
This object is used in the traps to indicate the IPv6 status of High Availability.
Status: current Access: read-only
OBJECT-TYPE    
  ArubaEnableValue  

wlsxHaV6Role 1.3.6.1.4.1.14823.2.2.1.20.2.1.4
This object is used in the traps to indicate the IPv6 HA role of the controller.
Status: current Access: read-only
OBJECT-TYPE    
  ArubaHaRole  

wlsxHaAPName 1.3.6.1.4.1.14823.2.2.1.20.2.1.5
This object is used in the traps to indicate name of an AP.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..63)  

wlsxHaActiveControllerIp 1.3.6.1.4.1.14823.2.2.1.20.2.1.6
This object is used in the traps to indicate the active controller IP address.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..63)  

wlsxHaStandbyControllerIp 1.3.6.1.4.1.14823.2.2.1.20.2.1.7
This object is used in the traps to indicate the standby controller IP address.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..63)  

wlsxTrapHaConnectivityStatus 1.3.6.1.4.1.14823.2.2.1.20.2.1.8
This object is used in the traps to indicate standby controller connectivity status of an AP.
Status: current Access: read-only
OBJECT-TYPE    
  ArubaHaConnectivityStatus  

wlsxTrapHaIntercontrollerHbtMissCnt 1.3.6.1.4.1.14823.2.2.1.20.2.1.9
This object is used in the traps to indicate the number of intercontroller heart beat miss.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

wlsxTrapHaHbtMissTimeStamp 1.3.6.1.4.1.14823.2.2.1.20.2.1.10
This object is used in the traps to indicate the time stamp of intercontroller heart beat miss.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..63)  

wlsxTrapHaStandbyApCnt 1.3.6.1.4.1.14823.2.2.1.20.2.1.11
This object is used in the traps to indicate the number of standby APs on standby controller.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

wlsxHaState 1.3.6.1.4.1.14823.2.2.1.20.2.2.1
This trap indicates that HA state has changed.
Status: current Access: read-only
NOTIFICATION-TYPE    

wlsxHaStandbyIpSentFailed 1.3.6.1.4.1.14823.2.2.1.20.2.2.2
This trap indicates that standby IP is sent to an AP failed
Status: current Access: read-only
NOTIFICATION-TYPE    

wlsxHaStandbyConnectivityState 1.3.6.1.4.1.14823.2.2.1.20.2.2.3
This trap indicates the standby connectivity status for an AP.
Status: current Access: read-only
NOTIFICATION-TYPE    

wlsxHaIntercontrollerHbtMiss 1.3.6.1.4.1.14823.2.2.1.20.2.2.4
This trap indicates around half of the threshold intercontroller hearbeat missed with serving controller.
Status: current Access: read-only
NOTIFICATION-TYPE    

wlsxHaFailoverTrigger 1.3.6.1.4.1.14823.2.2.1.20.2.2.5
This trap indicates that standby controller has triggered HA failover to aps belonging to a particular serving controller with which intercontroller heart beat missed above threshold.
Status: current Access: read-only
NOTIFICATION-TYPE    

wlsxHaFailoverRequestFromAp 1.3.6.1.4.1.14823.2.2.1.20.2.2.6
This trap indicates that an ap sent failover request to the controller. This could be because of AP missing hbt with serving controller, on receiving failover request from standby controller or AP trying to preempt back to active controller
Status: current Access: read-only
NOTIFICATION-TYPE