WLSR-AP-MIB

File: WLSR-AP-MIB.mib (104321 bytes)

Imported modules

SNMPv2-TC SNMPv2-SMI SNMPv2-CONF
ARUBA-MIB

Imported symbols

TEXTUAL-CONVENTION TimeTicks MODULE-IDENTITY
OBJECT-TYPE snmpModules Integer32
Counter32 IpAddress NOTIFICATION-TYPE
TDomain DisplayString PhysAddress
TAddress TimeInterval RowStatus
StorageType TestAndIncr MacAddress
TruthValue OBJECT-GROUP wlsrEnterpriseMibModules

Defined Types

WlsrConfigEntry  
SEQUENCE    
  wlsrBSSID MacAddress
  wlsrESSID DisplayString
  wlsrMode INTEGER
  wlsrCurrentChannel INTEGER
  wlsrTxPower Integer32
  wlsrRTSThreshold INTEGER
  wlsrRetryLimit INTEGER
  wlsrPreamble INTEGER
  wlsrBeaconInterval INTEGER
  wlsrPowerMgmt INTEGER
  wlsrLoadBalance INTEGER
  wlsrSupportedRates BITS
  wlsrDTIMPeriod INTEGER
  wlsrLMSAddress IpAddress
  wlsrEncryption BITS
  wlsrStatus TruthValue
  wlsrAgeout Integer32
  wlsrMTU INTEGER
  wlsrLocation DisplayString
  wlsrHideSSID TruthValue
  wlsrDenyBroadcast TruthValue
  wlsrBGmode INTEGER
  wlsrCardType INTEGER
  wlsrRegDomain Integer32
  wlsrCountryCode DisplayString
  wlsrTxRates BITS

WlsrChannelStatsEntry  
SEQUENCE    
  wlsrChStatsChannel INTEGER
  wlsrChStatsNumAPs Integer32
  wlsrChStatsNumStations Integer32
  wlsrChStatsTotPkts Counter32
  wlsrChStatsTotBytes Counter32
  wlsrChStatsTotRetryPkts Counter32
  wlsrChStatsTotFragmentedPkts Counter32
  wlsrChStatsTotPhyErrPkts Counter32
  wlsrChStatsTotMacErrPkts Counter32
  wlsrChStatsFrameErrorRate Integer32
  wlsrChStatsFrameRetryRate Integer32
  wlsrChStatsFrameLowSpeedRate Integer32
  wlsrChStatsFrameNonUnicastRate Integer32
  wlsrChStatsFrameBandwidthRate Integer32
  wlsrChStatsFrameFragmentationRate Integer32
  wlsrChStatsMonitoredTime TimeTicks

WlsrChannelRateStatsEntry  
SEQUENCE    
  wlsrChStatsTotPktsAt1Mbps Counter32
  wlsrChStatsTotBytesAt1Mbps Counter32
  wlsrChStatsTotPktsAt2Mbps Counter32
  wlsrChStatsTotBytesAt2Mbps Counter32
  wlsrChStatsTotPktsAt5Mbps Counter32
  wlsrChStatsTotBytesAt5Mbps Counter32
  wlsrChStatsTotPktsAt11Mbps Counter32
  wlsrChStatsTotBytesAt11Mbps Counter32
  wlsrChStatsTotPktsAt6Mbps Counter32
  wlsrChStatsTotBytesAt6Mbps Counter32
  wlsrChStatsTotPktsAt12Mbps Counter32
  wlsrChStatsTotBytesAt12Mbps Counter32
  wlsrChStatsTotPktsAt18Mbps Counter32
  wlsrChStatsTotBytesAt18Mbps Counter32
  wlsrChStatsTotPktsAt24Mbps Counter32
  wlsrChStatsTotBytesAt24Mbps Counter32
  wlsrChStatsTotPktsAt36Mbps Counter32
  wlsrChStatsTotBytesAt36Mbps Counter32
  wlsrChStatsTotPktsAt48Mbps Counter32
  wlsrChStatsTotBytesAt48Mbps Counter32
  wlsrChStatsTotPktsAt54Mbps Counter32
  wlsrChStatsTotBytesAt54Mbps Counter32

WlsrChannelDATypeStatsEntry  
SEQUENCE    
  wlsrChStatsTotDABroadcastPkts Counter32
  wlsrChStatsTotDABroadcastBytes Counter32
  wlsrChStatsTotDAMulticastPkts Counter32
  wlsrChStatsTotDAMulticastBytes Counter32
  wlsrChStatsTotDAUnicastPkts Counter32
  wlsrChStatsTotDAUnicastBytes Counter32

WlsrChannelFrameTypeStatsEntry  
SEQUENCE    
  wlsrChStatsTotMgmtPkts Counter32
  wlsrChStatsTotMgmtBytes Counter32
  wlsrChStatsTotCtrlPkts Counter32
  wlsrChStatsTotCtrlBytes Counter32
  wlsrChStatsTotDataPkts Counter32
  wlsrChStatsTotDataBytes Counter32

WlsrChannelPktSizeStatsEntry  
SEQUENCE    
  wlsrChStatsPkts63Bytes Counter32
  wlsrChStatsPkts64To127 Counter32
  wlsrChStatsPkts128To255 Counter32
  wlsrChStatsPkts256To511 Counter32
  wlsrChStatsPkts512To1023 Counter32
  wlsrChStatsPkts1024To1518 Counter32

WlsrStaStatsEntry  
SEQUENCE    
  wlsrStaAddress MacAddress
  wlsrStaTxPkts Counter32
  wlsrStaTxBytes Counter32
  wlsrStaRxPkts Counter32
  wlsrStaRxBytes Counter32
  wlsrStaTxRetryPkts Counter32
  wlsrStaRxRetryPkts Counter32
  wlsrStaTxFragmentedPkts Counter32
  wlsrStaRxFragmentedPkts Counter32
  wlsrStaReceiveErrPkts Counter32
  wlsrStaTxTotSignal Integer32
  wlsrStaTxSignalPkts Counter32
  wlsrStaTxCurSignal Integer32
  wlsrStaTxHighSignal Integer32
  wlsrStaRxTotNoise Counter32
  wlsrStaRxNoisePkts Counter32
  wlsrStaRxCurrentNoise Integer32
  wlsrStaRxHighNoise Integer32
  wlsrStaRxLowNoise Integer32
  wlsrStaFrameRetryRate Integer32
  wlsrStaFrameLowSpeedRate Integer32
  wlsrStaFrameNonUnicastRate Integer32
  wlsrStaFrameRetryErrorRate Integer32
  wlsrStaFrameBandwidthRate Integer32
  wlsrStaFrameFragmentationRate Integer32
  wlsrStaFrameHighBandwidthRate Integer32

WlsrStaRateStatsEntry  
SEQUENCE    
  wlsrStaTxPktsAt1Mbps Counter32
  wlsrStaTxBytesAt1Mbps Counter32
  wlsrStaTxPktsAt2Mbps Counter32
  wlsrStaTxBytesAt2Mbps Counter32
  wlsrStaTxPktsAt5Mbps Counter32
  wlsrStaTxBytesAt5Mbps Counter32
  wlsrStaTxPktsAt11Mbps Counter32
  wlsrStaTxBytesAt11Mbps Counter32
  wlsrStaTxPktsAt6Mbps Counter32
  wlsrStaTxBytesAt6Mbps Counter32
  wlsrStaTxPktsAt12Mbps Counter32
  wlsrStaTxBytesAt12Mbps Counter32
  wlsrStaTxPktsAt18Mbps Counter32
  wlsrStaTxBytesAt18Mbps Counter32
  wlsrStaTxPktsAt24Mbps Counter32
  wlsrStaTxBytesAt24Mbps Counter32
  wlsrStaTxPktsAt36Mbps Counter32
  wlsrStaTxBytesAt36Mbps Counter32
  wlsrStaTxPktsAt48Mbps Counter32
  wlsrStaTxBytesAt48Mbps Counter32
  wlsrStaTxPktsAt54Mbps Counter32
  wlsrStaTxBytesAt54Mbps Counter32
  wlsrStaRxPktsAt1Mbps Counter32
  wlsrStaRxBytesAt1Mbps Counter32
  wlsrStaRxPktsAt2Mbps Counter32
  wlsrStaRxBytesAt2Mbps Counter32
  wlsrStaRxPktsAt5Mbps Counter32
  wlsrStaRxBytesAt5Mbps Counter32
  wlsrStaRxPktsAt11Mbps Counter32
  wlsrStaRxBytesAt11Mbps Counter32
  wlsrStaRxPktsAt6Mbps Counter32
  wlsrStaRxBytesAt6Mbps Counter32
  wlsrStaRxPktsAt12Mbps Counter32
  wlsrStaRxBytesAt12Mbps Counter32
  wlsrStaRxPktsAt18Mbps Counter32
  wlsrStaRxBytesAt18Mbps Counter32
  wlsrStaRxPktsAt24Mbps Counter32
  wlsrStaRxBytesAt24Mbps Counter32
  wlsrStaRxPktsAt36Mbps Counter32
  wlsrStaRxBytesAt36Mbps Counter32
  wlsrStaRxPktsAt48Mbps Counter32
  wlsrStaRxBytesAt48Mbps Counter32
  wlsrStaRxPktsAt54Mbps Counter32
  wlsrStaRxBytesAt54Mbps Counter32

WlsrStaDATypeStatsEntry  
SEQUENCE    
  wlsrStaTxDABroadcastPkts Counter32
  wlsrStaTxDABroadcastBytes Counter32
  wlsrStaTxDAMulticastPkts Counter32
  wlsrStaTxDAMulticastBytes Counter32
  wlsrStaTxDAUnicastPkts Counter32
  wlsrStaTxDAUnicastBytes Counter32

WlsrStaFrameTypeStatsEntry  
SEQUENCE    
  wlsrStaTxMgmtPkts Counter32
  wlsrStaTxMgmtBytes Counter32
  wlsrStaTxCtrlPkts Counter32
  wlsrStaTxCtrlBytes Counter32
  wlsrStaTxDataPkts Counter32
  wlsrStaTxDataBytes Counter32
  wlsrStaRxMgmtPkts Counter32
  wlsrStaRxMgmtBytes Counter32
  wlsrStaRxCtrlPkts Counter32
  wlsrStaRxCtrlBytes Counter32
  wlsrStaRxDataPkts Counter32
  wlsrStaRxDataBytes Counter32

WlsrStaPktSizeStatsEntry  
SEQUENCE    
  wlsrStaTxPkts63Bytes Counter32
  wlsrStaTxPkts64To127 Counter32
  wlsrStaTxPkts128To255 Counter32
  wlsrStaTxPkts256To511 Counter32
  wlsrStaTxPkts512To1023 Counter32
  wlsrStaTxPkts1024To1518 Counter32
  wlsrStaRxPkts63Bytes Counter32
  wlsrStaRxPkts64To127 Counter32
  wlsrStaRxPkts128To255 Counter32
  wlsrStaRxPkts256To511 Counter32
  wlsrStaRxPkts512To1023 Counter32
  wlsrStaRxPkts1024To1518 Counter32

WlsrAirMonitorApListEntry  
SEQUENCE    
  wlsrAmApBSSID MacAddress
  wlsrAmSSID DisplayString
  wlsrAmChannel INTEGER
  wlsrAmPhysicalType INTEGER
  wlsrAmAccessPointType INTEGER
  wlsrAmRAPType INTEGER
  wlsrAmRSSI Integer32
  wlsrAmMonitoredTime TimeTicks
  wlsrAmInactivityTime TimeTicks
  wlsrAmLoadBalancing INTEGER

Defined Values

wlsrMIB 1.3.6.1.4.1.14823.2.3.1.1
This MIB is for managing the Access Points and Air Monitors.
MODULE-IDENTITY    

wlsrConfigGroup 1.3.6.1.4.1.14823.2.3.1.1.1
OBJECT IDENTIFIER    

wlsrStatsGroup 1.3.6.1.4.1.14823.2.3.1.1.3
OBJECT IDENTIFIER    

wlsrAirMonitorGroup 1.3.6.1.4.1.14823.2.3.1.1.4
OBJECT IDENTIFIER    

wlsrTrapsGroup 1.3.6.1.4.1.14823.2.3.1.1.100
OBJECT IDENTIFIER    

wlsrConfigTable 1.3.6.1.4.1.14823.2.3.1.1.1.1
Table will list the configuration data of a wifi interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WlsrConfigEntry

wlsrConfigEntry 1.3.6.1.4.1.14823.2.3.1.1.1.1.1
A Wifi configuration entry
Status: current Access: not-accessible
OBJECT-TYPE    
  WlsrConfigEntry  

wlsrBSSID 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.1
BSSID of the WIFI Interface
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

wlsrESSID 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.2
ESSID of the WIFI Interface
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

wlsrMode 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.3
Mode of the Access Point. Master indicates that we are operating as Access Point. monitor indicates that the AP is an Air Monitor.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER master(1), adhoc(2), monitor(3)  

wlsrCurrentChannel 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.4
The current operating frequency channel of the DSSS PHY.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..165  

wlsrTxPower 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.5
Transmit power of the Access point. The value is between 0 ... 4
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

wlsrRTSThreshold 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.6
This attribute shall indicate the number of octets in an MPDU, below which an RTS/CTS handshake shall not be performed.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..2347  

wlsrRetryLimit 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.7
This attribute shall indicate the maximum number of transmission attempts of a frame, the length of which is less than or equal to dot11RTSThreshold, that shall be made before a failure condition is indicated. The default value of this attribute shall be 7.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

wlsrPreamble 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.8
The current radio preamble type in use by the wifi interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER short(1), long(2)  

wlsrBeaconInterval 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.9
This object shall specify the number of TU that a station shall use for scheduling Beacon transmissions. This value is transmitted in Beacon and Probe Response frames.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

wlsrPowerMgmt 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.10
This attribute indicates whether Power Management is enabled or not.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wlsrLoadBalance 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.11
This attribute indicates if load balancing is enabled or disabled.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wlsrSupportedRates 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.12
Basic Bit rates supported by this WIFI interface.
Status: current Access: read-only
OBJECT-TYPE    
  BITS unused0(0), unused1(1), unused2(2), unused3(3), rate54Mbps(4), rate48Mbps(5), rate36Mbps(6), rate24Mbps(7), rate18Mbps(8), rate12Mbps(9), rate9Mbps(10), rate6Mbps(11), rate11Mbps(12), rate5Mbps(13), rate2Mbps(14), rate1Mbps(15)  

wlsrDTIMPeriod 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.13
This attribute shall specify the number of beacon intervals that shall elapse between transmission of Beacons frames containing a TIM element whose DTIM Count field is 0. This value is transmitted in the DTIM Period field of Beacon frames.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

wlsrLMSAddress 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.14
This attribute indicates the IP Address of the Local switch that the AP is connected to.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

wlsrEncryption 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.15
This attribute indicates the Encryption type of the WIFI interface.
Status: current Access: read-only
OBJECT-TYPE    
  BITS unused0(0), unused1(1), unused2(2), unused3(3), unused4(4), unused5(5), unused6(6), xSec(7), wpa2PreAuth(8), aes8021x(9), aesPSK(10), dynamicTkip(11), staticTkip(12), dynamicWep(13), staticWep(14), disabled(15)  

wlsrStatus 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.17
This attribute indicates the status of the WIFI Interface.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

wlsrAgeout 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.18
This attribute indicates the ageout value in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

wlsrMTU 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.19
This attribute indicates the MTU of the WIFI Interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..2347  

wlsrLocation 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.20
This attribute indicates the Location of the Access Point in Building.Floor.location format.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

wlsrHideSSID 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.21
This attribute indicates if SSID is hidden or not.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

wlsrDenyBroadcast 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.22
A True value indicates that Broadcast is disabled.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

wlsrBGmode 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.23
This attributes indicates the mode of the WIFI Interface
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER bgMixed(1), bOnly(2), gOnly(3)  

wlsrCardType 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.24
Indicates the type of the radio card.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER noCard(1), intersil(2), atherosA(3), atherosBG(4), atherosABG(5), ar5212A(10), ar5212BG(11), ar5212ABG(12)  

wlsrRegDomain 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.25
This Object represents the configured Regulatory Domain this AP will adhere to. 1 -- US 2 -- JAPAN 3 -- EU 4 -- EU2 5 -- EU3 6 -- KOREA 7 -- CHINA 8 -- France 9 -- Singapore 10 -- MALAY 11 -- BRAZIL 12 -- Taiwan 13 -- Czech Republic 14 -- GR 15 -- South Africa 16 -- Argentina 17 -- Australia 18 -- Chile
Status: deprecated Access: read-only
OBJECT-TYPE    
  Integer32  

wlsrCountryCode 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.26
This Object represents the configured Country code .
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

wlsrTxRates 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.27
Transmit Bit rates supported by this WIFI interface.
Status: current Access: read-only
OBJECT-TYPE    
  BITS unused0(0), unused1(1), unused2(2), unused3(3), rate54Mbps(4), rate48Mbps(5), rate36Mbps(6), rate24Mbps(7), rate18Mbps(8), rate12Mbps(9), rate9Mbps(10), rate6Mbps(11), rate11Mbps(12), rate5Mbps(13), rate2Mbps(14), rate1Mbps(15)  

wlsrStatsChannelGroup 1.3.6.1.4.1.14823.2.3.1.1.3.3
OBJECT IDENTIFIER    

wlsrChannelStatsTable 1.3.6.1.4.1.14823.2.3.1.1.3.3.1
Table contains the Channel Statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WlsrChannelStatsEntry

wlsrChannelStatsEntry 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1
Channel Statistics Table
Status: current Access: not-accessible
OBJECT-TYPE    
  WlsrChannelStatsEntry  

wlsrChStatsChannel 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.1
The frequency Channel on which these statistics are collected.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..165  

wlsrChStatsNumAPs 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.2
This attribute indicates the number of APs using this channel.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

wlsrChStatsNumStations 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.3
This attribute indicates the number of stations using this channel.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

wlsrChStatsTotPkts 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.4
This attribute indicates the total packets observed on this channel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrChStatsTotBytes 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.5
This attribute indicates the total Bytes observed on this channel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrChStatsTotRetryPkts 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.6
This attribute indicates the total Retry Packets observed on this channel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrChStatsTotFragmentedPkts 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.7
This attribute indicates the total Fragmented Packets observed on this channel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrChStatsTotPhyErrPkts 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.8
This attribute indicates the total Physical Error Packets observed on this channel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrChStatsTotMacErrPkts 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.9
This attribute indicates the total Mac errors packets observed on this channel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrChStatsFrameErrorRate 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.10
Frame errors as a percentage of total frames on this channel.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

wlsrChStatsFrameRetryRate 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.11
The Frame Retry Rate
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

wlsrChStatsFrameLowSpeedRate 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.12
Frame Low speed error rate in kbps.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

wlsrChStatsFrameNonUnicastRate 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.13
Frame non Unicast rate in kbps.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

wlsrChStatsFrameBandwidthRate 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.14
Frame Bandwidth rate in kbps.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

wlsrChStatsFrameFragmentationRate 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.15
Frame Fragmentation Rate in kbps.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

wlsrChStatsMonitoredTime 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.16
Time in ticks, since we were observing this channel.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

wlsrChannelRateStatsTable 1.3.6.1.4.1.14823.2.3.1.1.3.3.2
This table contains all the per channel Packet and Byte Counts but represented in terms of rate categories.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WlsrChannelRateStatsEntry

wlsrChannelRateStatsEntry 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1
Channel Rate Statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  WlsrChannelRateStatsEntry  

wlsrChStatsTotPktsAt1Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.1
This attribute indicates the total number of packets observed on this channel at 1Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrChStatsTotBytesAt1Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.2
This attribute indicates the total number of Bytes observed on this channel at 1Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrChStatsTotPktsAt2Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.3
This attribute indicates the total number of packets observed on this channel at 2Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrChStatsTotBytesAt2Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.4
This attribute indicates the total number of Bytes observed on this channel at 2Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrChStatsTotPktsAt5Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.5
This attribute indicates the total number of packets observed on this channel at 5Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrChStatsTotBytesAt5Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.6
This attribute indicates the total number of Bytes observed on this channel at 5Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrChStatsTotPktsAt11Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.7
This attribute indicates the total number of packets observed on this channel at 11Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrChStatsTotBytesAt11Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.8
This attribute indicates the total number of Bytes observed on this channel at 11Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrChStatsTotPktsAt6Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.9
This attribute indicates the total number of packets observed on this channel at 6Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrChStatsTotBytesAt6Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.10
This attribute indicates the total number of Bytes observed on this channel at 6Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrChStatsTotPktsAt12Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.11
This attribute indicates the total number of packets observed on this channel at 12Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrChStatsTotBytesAt12Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.12
This attribute indicates the total number of Bytes observed on this channel at 12Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrChStatsTotPktsAt18Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.13
This attribute indicates the total number of packets observed on this channel at 18Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrChStatsTotBytesAt18Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.14
This attribute indicates the total number of Bytes observed on this channel at 18Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrChStatsTotPktsAt24Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.15
This attribute indicates the total number of packets observed on this channel at 24Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrChStatsTotBytesAt24Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.16
This attribute indicates the total number of Bytes observed on this channel at 24Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrChStatsTotPktsAt36Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.17
This attribute indicates the total number of packets observed on this channel at 36Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrChStatsTotBytesAt36Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.18
This attribute indicates the total number of Bytes observed on this channel at 36Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrChStatsTotPktsAt48Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.19
This attribute indicates the total number of packets observed on this channel at 48Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrChStatsTotBytesAt48Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.20
This attribute indicates the total number of Bytes observed on this channel at 48Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrChStatsTotPktsAt54Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.21
This attribute indicates the total number of packets observed on this channel at 54Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrChStatsTotBytesAt54Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.22
This attribute indicates the total number of Bytes observed on this channel at 54Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrChannelDATypeStatsTable 1.3.6.1.4.1.14823.2.3.1.1.3.3.3
This table contains all the per channel Packet and Byte Counts but broken down in terms of Destination Address Type.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WlsrChannelDATypeStatsEntry

wlsrChannelDATypeStatsEntry 1.3.6.1.4.1.14823.2.3.1.1.3.3.3.1
Channel Statistics based on the Address Type.
Status: current Access: not-accessible
OBJECT-TYPE    
  WlsrChannelDATypeStatsEntry  

wlsrChStatsTotDABroadcastPkts 1.3.6.1.4.1.14823.2.3.1.1.3.3.3.1.1
This attribute indicates the total number of Broadcast packets observed on this channel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrChStatsTotDABroadcastBytes 1.3.6.1.4.1.14823.2.3.1.1.3.3.3.1.2
This attribute indicates the total number of Broadcast Bytes observed on this channel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrChStatsTotDAMulticastPkts 1.3.6.1.4.1.14823.2.3.1.1.3.3.3.1.3
This attribute indicates the total number of Multicast packets observed on this channel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrChStatsTotDAMulticastBytes 1.3.6.1.4.1.14823.2.3.1.1.3.3.3.1.4
This attribute indicates the total number of Multicast Bytes observed on this channel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrChStatsTotDAUnicastPkts 1.3.6.1.4.1.14823.2.3.1.1.3.3.3.1.5
This attribute indicates the total number of Unicast packets observed on this channel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrChStatsTotDAUnicastBytes 1.3.6.1.4.1.14823.2.3.1.1.3.3.3.1.6
This attribute indicates the total number of Unicast Bytes observed on this channel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrChannelFrameTypeStatsTable 1.3.6.1.4.1.14823.2.3.1.1.3.3.4
This table contains all the per channel Packet and Byte Counts but broken down into different Frame Types.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WlsrChannelFrameTypeStatsEntry

wlsrChannelFrameTypeStatsEntry 1.3.6.1.4.1.14823.2.3.1.1.3.3.4.1
Channel Statistics based on Frame Type.
Status: current Access: not-accessible
OBJECT-TYPE    
  WlsrChannelFrameTypeStatsEntry  

wlsrChStatsTotMgmtPkts 1.3.6.1.4.1.14823.2.3.1.1.3.3.4.1.1
This attribute indicates the total number of Management packets observed on this channel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrChStatsTotMgmtBytes 1.3.6.1.4.1.14823.2.3.1.1.3.3.4.1.2
This attribute indicates the total number of Management Bytes observed on this channel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrChStatsTotCtrlPkts 1.3.6.1.4.1.14823.2.3.1.1.3.3.4.1.3
This attribute indicates the total number of Control packets observed on this channel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrChStatsTotCtrlBytes 1.3.6.1.4.1.14823.2.3.1.1.3.3.4.1.4
This attribute indicates the total number of Control Bytes observed on this channel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrChStatsTotDataPkts 1.3.6.1.4.1.14823.2.3.1.1.3.3.4.1.5
This attribute indicates the total number of Data packets observed on this channel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrChStatsTotDataBytes 1.3.6.1.4.1.14823.2.3.1.1.3.3.4.1.6
This attribute indicates the total number of Data Bytes observed on this channel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrChannelPktSizeStatsTable 1.3.6.1.4.1.14823.2.3.1.1.3.3.5
This table contains all the per channel Packet and Byte Counts but broken down into different Packet Sizes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WlsrChannelPktSizeStatsEntry

wlsrChannelPktSizeStatsEntry 1.3.6.1.4.1.14823.2.3.1.1.3.3.5.1
Channel Statistics based on the packet sizes.
Status: current Access: not-accessible
OBJECT-TYPE    
  WlsrChannelPktSizeStatsEntry  

wlsrChStatsPkts63Bytes 1.3.6.1.4.1.14823.2.3.1.1.3.3.5.1.1
This attribute indicates the total number of packets that were less than 64 bytes long.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrChStatsPkts64To127 1.3.6.1.4.1.14823.2.3.1.1.3.3.5.1.2
This attribute indicates the total number of packets that were between 64 and 127 bytes long.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrChStatsPkts128To255 1.3.6.1.4.1.14823.2.3.1.1.3.3.5.1.3
This attribute indicates the total number of packets that were between 128 and 255 bytes long.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrChStatsPkts256To511 1.3.6.1.4.1.14823.2.3.1.1.3.3.5.1.4
This attribute indicates the total number of packets that were between 256 and 511 bytes long.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrChStatsPkts512To1023 1.3.6.1.4.1.14823.2.3.1.1.3.3.5.1.5
This attribute indicates the total number of packets that were between 512 and 1023 bytes long.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrChStatsPkts1024To1518 1.3.6.1.4.1.14823.2.3.1.1.3.3.5.1.6
This attribute indicates the total number of packets that were between 1024 and 1518 bytes long.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStatsStaGroup 1.3.6.1.4.1.14823.2.3.1.1.3.4
OBJECT IDENTIFIER    

wlsrStaStatsTable 1.3.6.1.4.1.14823.2.3.1.1.3.4.1
This Table contains all the Aggregate statistics collected for a station.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WlsrStaStatsEntry

wlsrStaStatsEntry 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1
Station Statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  WlsrStaStatsEntry  

wlsrStaAddress 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.1
Mac Address of the Station connected to this Access Point.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

wlsrStaTxPkts 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.2
This attribute indicates the total packets Transmitted to the Station.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaTxBytes 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.3
This attribute indicates the total Bytes Transmitted to the Station.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaRxPkts 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.4
This attribute indicates the total packets Received from the Station.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaRxBytes 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.5
This attribute indicates the total Bytes Received from the Station.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaTxRetryPkts 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.6
This attribute indicates the Retry Packets transmitted by the station
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaRxRetryPkts 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.7
This attribute indicates the Retry Packets received from the station
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaTxFragmentedPkts 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.8
This attribute indicates the Fragmented Packets transmitted by the station.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaRxFragmentedPkts 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.9
This attribute indicates the Fragmented Packets Received from the station.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaReceiveErrPkts 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.10
This attribute indicates the total Error Packets received from this station.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaTxTotSignal 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.11
The attribute indicates the total transmitted signal computed for this station.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

wlsrStaTxSignalPkts 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.12
This attribute indicates the total Signal Packets transmitted by this station.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaTxCurSignal 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.13
This attribute indicate the stations current transmit signal strength.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

wlsrStaTxHighSignal 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.14
This attribute indicate the stations high transmit signal strength.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

wlsrStaRxTotNoise 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.15
Total Noise.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaRxNoisePkts 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.16
Received Noise.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaRxCurrentNoise 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.17
Current Noise.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Integer32  

wlsrStaRxHighNoise 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.18
High Noise
Status: deprecated Access: read-only
OBJECT-TYPE    
  Integer32  

wlsrStaRxLowNoise 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.19
Low Noise
Status: deprecated Access: read-only
OBJECT-TYPE    
  Integer32  

wlsrStaFrameRetryRate 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.20
Station Frame Retry Rate in kbps.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

wlsrStaFrameLowSpeedRate 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.21
Station Frame Low speed error rate in kbps.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

wlsrStaFrameNonUnicastRate 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.22
Station Frame Non Unicast rate in kbps.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

wlsrStaFrameRetryErrorRate 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.23
Station Frame Retry Error Rate in kbps.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

wlsrStaFrameBandwidthRate 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.24
Station Frame Bandwidth rate in kbps.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

wlsrStaFrameFragmentationRate 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.25
Station Frame Fragmentation Rate in kbps.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

wlsrStaFrameHighBandwidthRate 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.26
Station Frame High Bandwidth Rate in kbps.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

wlsrStaRateStatsTable 1.3.6.1.4.1.14823.2.3.1.1.3.4.2
This table contains all the per channel Packet and Byte Counts but represented in terms of rate categories.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WlsrStaRateStatsEntry

wlsrStaRateStatsEntry 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1
Station Rate Stats Table
Status: current Access: not-accessible
OBJECT-TYPE    
  WlsrStaRateStatsEntry  

wlsrStaTxPktsAt1Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.1
This attribute indicates the number of Packets Transmitted by the station at 1Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaTxBytesAt1Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.2
This attribute indicates the number of Octets Transmitted by the station at 1Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaTxPktsAt2Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.3
This attribute indicates the number of Packets Transmitted by the station at 2Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaTxBytesAt2Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.4
This attribute indicates the number of Octets Transmitted by the station at 2Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaTxPktsAt5Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.5
This attribute indicates the number of Packets Transmitted by the station at 5Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaTxBytesAt5Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.6
This attribute indicates the number of Octets Transmitted by the station at 5Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaTxPktsAt11Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.7
This attribute indicates the number of Packets Transmitted by the station at 11Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaTxBytesAt11Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.8
This attribute indicates the number of Octets Transmitted by the station at 11Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaTxPktsAt6Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.9
This attribute indicates the number of Packets Transmitted by the station at 6Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaTxBytesAt6Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.10
This attribute indicates the number of Octets Transmitted by the station at 6Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaTxPktsAt12Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.11
This attribute indicates the number of Packets Transmitted by the station at 12Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaTxBytesAt12Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.12
This attribute indicates the number of Octets Transmitted by the station at 12Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaTxPktsAt18Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.13
This attribute indicates the number of Packets Transmitted by the station at 18Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaTxBytesAt18Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.14
This attribute indicates the number of Octets Transmitted by the station at 18Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaTxPktsAt24Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.15
This attribute indicates the number of Packets Transmitted by the station at 24Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaTxBytesAt24Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.16
This attribute indicates the number of Octets Transmitted by the station at 24Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaTxPktsAt36Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.17
This attribute indicates the number of Packets Transmitted by the station at 36Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaTxBytesAt36Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.18
This attribute indicates the number of Octets Transmitted by the station at 36Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaTxPktsAt48Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.19
This attribute indicates the number of Packets Transmitted by the station at 48Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaTxBytesAt48Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.20
This attribute indicates the number of Octets Transmitted by the station at 48Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaTxPktsAt54Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.21
This attribute indicates the number of Packets Transmitted by the station at 54Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaTxBytesAt54Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.22
This attribute indicates the number of Octets Transmitted by the station at 54Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaRxPktsAt1Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.23
This attribute indicates the number of Packets Received by the station at 1Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaRxBytesAt1Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.24
This attribute indicates the number of Octets Received by the station at 1Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaRxPktsAt2Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.25
This attribute indicates the number of Packets Received by the station at 2Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaRxBytesAt2Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.26
This attribute indicates the number of Octets Received by the station at 2Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaRxPktsAt5Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.27
This attribute indicates the number of Packets Received by the station at 5Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaRxBytesAt5Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.28
This attribute indicates the number of Octets Received by the station at 5Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaRxPktsAt11Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.29
This attribute indicates the number of Packets Received by the station at 11Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaRxBytesAt11Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.30
This attribute indicates the number of Octets Received by the station at 11Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaRxPktsAt6Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.31
This attribute indicates the number of Packets Received by the station at 6Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaRxBytesAt6Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.32
This attribute indicates the number of Octets Received by the station at 6Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaRxPktsAt12Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.33
This attribute indicates the number of Packets Received by the station at 12Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaRxBytesAt12Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.34
This attribute indicates the number of Octets Received by the station at 12Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaRxPktsAt18Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.35
This attribute indicates the number of Packets Received by the station at 18Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaRxBytesAt18Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.36
This attribute indicates the number of Octets Received by the station at 18Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaRxPktsAt24Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.37
This attribute indicates the number of Packets Received by the station at 24Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaRxBytesAt24Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.38
This attribute indicates the number of Octets Received by the station at 24Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaRxPktsAt36Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.39
This attribute indicates the number of Packets Received by the station at 36Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaRxBytesAt36Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.40
This attribute indicates the number of Octets Received by the station at 36Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaRxPktsAt48Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.41
This attribute indicates the number of Packets Received by the station at 48Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaRxBytesAt48Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.42
This attribute indicates the number of Octets Received by the station at 48Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaRxPktsAt54Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.43
This attribute indicates the number of Packets Received by the station at 54Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaRxBytesAt54Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.44
This attribute indicates the number of Octets Received by the station at 54Mbps rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaDATypeStatsTable 1.3.6.1.4.1.14823.2.3.1.1.3.4.3
This table contains all the per channel Packet and Byte Counts but broken down in terms of Destination Address Type.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WlsrStaDATypeStatsEntry

wlsrStaDATypeStatsEntry 1.3.6.1.4.1.14823.2.3.1.1.3.4.3.1
Station Statistics based on the Destination Address Type.
Status: current Access: not-accessible
OBJECT-TYPE    
  WlsrStaDATypeStatsEntry  

wlsrStaTxDABroadcastPkts 1.3.6.1.4.1.14823.2.3.1.1.3.4.3.1.1
This attribute indicates the number of Broadcast packets transmitted by this Station.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaTxDABroadcastBytes 1.3.6.1.4.1.14823.2.3.1.1.3.4.3.1.2
This attribute indicates the number of Broadcast Bytes transmitted by this Station.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaTxDAMulticastPkts 1.3.6.1.4.1.14823.2.3.1.1.3.4.3.1.3
This attribute indicates the number of Multicast packets transmitted by this station.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaTxDAMulticastBytes 1.3.6.1.4.1.14823.2.3.1.1.3.4.3.1.4
This attribute indicates the number of Multicast Bytes transmitted by this station.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaTxDAUnicastPkts 1.3.6.1.4.1.14823.2.3.1.1.3.4.3.1.5
This attribute indicates the total of Unicast packets transmitted by this station.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaTxDAUnicastBytes 1.3.6.1.4.1.14823.2.3.1.1.3.4.3.1.6
This attribute indicates the total of Unicast Bytes transmitted by this station.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaFrameTypeStatsTable 1.3.6.1.4.1.14823.2.3.1.1.3.4.4
This table contains all the per channel Packet and Byte Counts but broken down into different Frame Types.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WlsrStaFrameTypeStatsEntry

wlsrStaFrameTypeStatsEntry 1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1
Station Frame Type Stats Entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  WlsrStaFrameTypeStatsEntry  

wlsrStaTxMgmtPkts 1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.1
This attribute indicates the Transmitted Management packets from a station.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaTxMgmtBytes 1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.2
This attribute indicates the Transmitted Management Bytes from a station
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaTxCtrlPkts 1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.3
This attribute indicates the Transmitted Control packets from a station
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaTxCtrlBytes 1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.4
This attribute indicates the Transmitted Control Bytes from a station
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaTxDataPkts 1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.5
This attribute indicates the Transmitted Data packets from a station
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaTxDataBytes 1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.6
This attribute indicates the Transmitted Data Bytes observed on this channel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaRxMgmtPkts 1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.7
This attribute indicates the number of received Management packets at a station.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaRxMgmtBytes 1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.8
This attribute indicates the number of received Management Bytes at a station.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaRxCtrlPkts 1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.9
This attribute indicates the number of received Control packets at a station.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaRxCtrlBytes 1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.10
This attribute indicates the number of received Control Bytes at a station.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaRxDataPkts 1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.11
This attribute indicates the number of received Data packets at a station.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaRxDataBytes 1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.12
This attribute indicates the number of received Data Bytes at a station.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaPktSizeStatsTable 1.3.6.1.4.1.14823.2.3.1.1.3.4.5
This table contains all the per channel Packet and Byte Counts but broken down into different Packet Sizes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WlsrStaPktSizeStatsEntry

wlsrStaPktSizeStatsEntry 1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1
Station Packet Size Stats.
Status: current Access: not-accessible
OBJECT-TYPE    
  WlsrStaPktSizeStatsEntry  

wlsrStaTxPkts63Bytes 1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.1
This attribute indicates the number of packets transmitted by the station that were less than 64 bytes long.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaTxPkts64To127 1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.2
This attribute indicates the number of packets transmitted by the station that were between 64 and 127 bytes long.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaTxPkts128To255 1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.3
This attribute indicates the number of packets transmitted by the station that were between 128 and 255 bytes long.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaTxPkts256To511 1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.4
This attribute indicates the number of packets transmitted by the station that were between 256 and 511 bytes long.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaTxPkts512To1023 1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.5
This attribute indicates the number of packets transmitted by the station that were between 512 and 1023 bytes long.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaTxPkts1024To1518 1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.6
This attribute indicates the number of packets transmitted by the station that were between 1024 and 1518 bytes long.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaRxPkts63Bytes 1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.7
This attribute indicates the number of packets Received by the station that were less than 64 bytes long.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaRxPkts64To127 1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.8
This attribute indicates the number of packets Received by the station that were between 64 and 127 bytes long.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaRxPkts128To255 1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.9
This attribute indicates the number of packets Received by the station that were between 128 and 255 bytes long.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaRxPkts256To511 1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.10
This attribute indicates the number of packets Received by the station that were between 256 and 511 bytes long.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaRxPkts512To1023 1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.11
This attribute indicates the number of packets Received by the station that were between 512 and 1023 bytes long.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrStaRxPkts1024To1518 1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.12
This attribute indicates the number of packets Received by the station that were between 1024 and 1518 bytes long.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlsrAirMonitorApListTable 1.3.6.1.4.1.14823.2.3.1.1.4.1
This table contains all the Access Points monitored by the AM.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WlsrAirMonitorApListEntry

wlsrAirMonitorApListEntry 1.3.6.1.4.1.14823.2.3.1.1.4.1.1
Ap List Entry
Status: current Access: not-accessible
OBJECT-TYPE    
  WlsrAirMonitorApListEntry  

wlsrAmApBSSID 1.3.6.1.4.1.14823.2.3.1.1.4.1.1.1
BSSID of the Access Point.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

wlsrAmSSID 1.3.6.1.4.1.14823.2.3.1.1.4.1.1.2
This attribute indicates the SSID of the AP.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..62)  

wlsrAmChannel 1.3.6.1.4.1.14823.2.3.1.1.4.1.1.3
This attribute indicates the channel on which this AP is operating.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..165  

wlsrAmPhysicalType 1.3.6.1.4.1.14823.2.3.1.1.4.1.1.4
This attribute indicates the physical layer type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER dot11b(1), dot11a(2), dot11g(3)  

wlsrAmAccessPointType 1.3.6.1.4.1.14823.2.3.1.1.4.1.1.5
This attribute indicates the type of AP.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER genericAp(1), softAp(2), ciscoAp(3)  

wlsrAmRAPType 1.3.6.1.4.1.14823.2.3.1.1.4.1.1.6
Type of the Access Point.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER valid(1), interfering(2), unsecure(3), dos(4), unknown(5)  

wlsrAmRSSI 1.3.6.1.4.1.14823.2.3.1.1.4.1.1.7
Access point Receiver Signal Strength Indicator.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

wlsrAmMonitoredTime 1.3.6.1.4.1.14823.2.3.1.1.4.1.1.8
Time in ticks, since the AM is observing this access point.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

wlsrAmInactivityTime 1.3.6.1.4.1.14823.2.3.1.1.4.1.1.9
Access point Inactivity Time.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

wlsrAmLoadBalancing 1.3.6.1.4.1.14823.2.3.1.1.4.1.1.10
The attributes indicates whether Load balancing is enabled for this access point.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wlsrTrapObjectsGroup 1.3.6.1.4.1.14823.2.3.1.1.100.100
OBJECT IDENTIFIER    

wlsrTargetApBSSID 1.3.6.1.4.1.14823.2.3.1.1.100.100.1
This Object is used in the traps to indicate the BSSID of the Access Point, for which we are raising the trap. If an Air Monitor is sending the trap then this will indicate AP. If an Access Point is sending the trap, then it will point to itself.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

wlsrTargetApSSID 1.3.6.1.4.1.14823.2.3.1.1.100.100.2
This Object is used in the traps to indicate the SSID of the Access Point, for which we are raising the trap. If an Air Monitor is sending the trap then this will indicate AP. If an Access Point is sending the trap, then it will point to itself.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

wlsrTargetApChannel 1.3.6.1.4.1.14823.2.3.1.1.100.100.3
This Object is used in the traps to indicate the Channel of the Access Point, for which we are raising the trap. If an Air Monitor is sending the trap then this will indicate AP. If an Access Point is sending the trap, then it will point to itself.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..165  

wlsrSourceMac 1.3.6.1.4.1.14823.2.3.1.1.100.100.4
This Object is used in the traps to indicate the MAC address of the Source.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

wlsrNodeMac 1.3.6.1.4.1.14823.2.3.1.1.100.100.5
This Object is used in the traps to indicate the MAC address of a Node.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

wlsrFrameType 1.3.6.1.4.1.14823.2.3.1.1.100.100.6
This Object is used in the traps to indicate the Frame Type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER associateRequest(1), associateResponse(2), reassociateRequest(3), reassociateResponse(4), probeRequest(5), probeResponse(6), beacon(9), atim(10), disassociate(11), auth(12), deauth(13)  

wlsrAddressType 1.3.6.1.4.1.14823.2.3.1.1.100.100.7
This Object is used in the traps to indicate the Address Type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER srcAddress(1), dstAddress(2), bssid(3)  

wlsrSignatureName 1.3.6.1.4.1.14823.2.3.1.1.100.100.8
This Object is used in the traps to indicate the Signature Name.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

wlsrMatchedMac 1.3.6.1.4.1.14823.2.3.1.1.100.100.9
This Object is used in the traps to indicate the Macaddress.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

wlsrMatchedIp 1.3.6.1.4.1.14823.2.3.1.1.100.100.10
This Object is used in the traps to indicate the Ip Address.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

wlsrReceiverMac 1.3.6.1.4.1.14823.2.3.1.1.100.100.11
This Object is used in the traps to indicate the MAC address of the Receiver.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

wlsrTransmitterMac 1.3.6.1.4.1.14823.2.3.1.1.100.100.12
This Object is used in the traps to indicate the MAC address of the Transmitter.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

wlsrRSSI 1.3.6.1.4.1.14823.2.3.1.1.100.100.13
This Object is used in the traps to indicate the Signal Strength Indicator.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

wlsrRogueInfoURL 1.3.6.1.4.1.14823.2.3.1.1.100.100.14
This Object is used to point to the WEBGUI Rogue AP information URL.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..256)  

wlsrInterferingAPInfoURL 1.3.6.1.4.1.14823.2.3.1.1.100.100.15
This Object is used to point to the WEBGUI Rogue interfering AP information URL.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..256)  

wlsrUnsecureApDetected 1.3.6.1.4.1.14823.2.3.1.1.100.1001
This trap indicates that an Unsecure Access Point is detected by an Air Monitor located at wlsrLocation on channel wlsrCurrentChannel. The AP is declared unsecure, because we matched it to the wlsrMatchedMac/wlsrMatchedIp.
Status: current Access: read-only
NOTIFICATION-TYPE    

wlsrStaImpersonation 1.3.6.1.4.1.14823.2.3.1.1.100.1002
This trap indicates that an AM at location wlsrLocation detected a Station impersonation.
Status: current Access: read-only
NOTIFICATION-TYPE    

wlsrReservedChannelViolation 1.3.6.1.4.1.14823.2.3.1.1.100.1003
This trap indicates that an Access Point is detected by an AP at location wlsrLocation, which violates the Reserved Channel configuration.
Status: current Access: read-only
NOTIFICATION-TYPE    

wlsrValidSSIDViolation 1.3.6.1.4.1.14823.2.3.1.1.100.1004
This trap indicates that an Access Point violating Valid SSID is detected by an AP at wlsrLocation.
Status: current Access: read-only
NOTIFICATION-TYPE    

wlsrChannelMisconfiguration 1.3.6.1.4.1.14823.2.3.1.1.100.1005
This trap indicates that an Access Point has a bad channel configuration.
Status: current Access: read-only
NOTIFICATION-TYPE    

wlsrOUIMisconfiguration 1.3.6.1.4.1.14823.2.3.1.1.100.1006
This trap indicates that an Access Point has bad OUI configuration.
Status: current Access: read-only
NOTIFICATION-TYPE    

wlsrSSIDMisconfiguration 1.3.6.1.4.1.14823.2.3.1.1.100.1007
This trap indicates that an Access Point has bad SSID configuration.
Status: current Access: read-only
NOTIFICATION-TYPE    

wlsrShortPreableMisconfiguration 1.3.6.1.4.1.14823.2.3.1.1.100.1008
This trap indicates that an Access Point has bad Short preamble configuration.
Status: current Access: read-only
NOTIFICATION-TYPE    

wlsrWPAMisconfiguration 1.3.6.1.4.1.14823.2.3.1.1.100.1009
This trap indicates that an Access Point has bad WPA configuration.
Status: current Access: read-only
NOTIFICATION-TYPE    

wlsrAdhocNetworkDetected 1.3.6.1.4.1.14823.2.3.1.1.100.1010
This trap indicates that an AM has detected an Adhoc network.
Status: current Access: read-only
NOTIFICATION-TYPE    

wlsrStaPolicyViolation 1.3.6.1.4.1.14823.2.3.1.1.100.1011
This trap indicates that a Valid Station policy is violated.
Status: current Access: read-only
NOTIFICATION-TYPE    

wlsrRepeatWEPIVViolation 1.3.6.1.4.1.14823.2.3.1.1.100.1012
This trap indicates that an AP/AM detected a Repeat WEP-IV violation.
Status: current Access: read-only
NOTIFICATION-TYPE    

wlsrWeakWEPIVViolation 1.3.6.1.4.1.14823.2.3.1.1.100.1013
This trap indicates that an AP/AM detected a Weak WEP-IV violation.
Status: current Access: read-only
NOTIFICATION-TYPE    

wlsrChannelInterferenceDetected 1.3.6.1.4.1.14823.2.3.1.1.100.1014
This trap indicates that an AM/AP located at wlsrLocation has detected a channel interference on wlsrCurrentChannel.
Status: current Access: read-only
NOTIFICATION-TYPE    

wlsrAPInterferenceDetected 1.3.6.1.4.1.14823.2.3.1.1.100.1015
This trap indicates that an AM/AP located at wlsrLocation has detected an AP interference on wlsrCurrentChannel.
Status: current Access: read-only
NOTIFICATION-TYPE    

wlsrStaInterferenceDetected 1.3.6.1.4.1.14823.2.3.1.1.100.1016
This trap indicates that an AM/AP located at wlsrLocation has detected a Station interference on wlsrCurrentChannel.
Status: current Access: read-only
NOTIFICATION-TYPE    

wlsrFrameRetryRateExceeded 1.3.6.1.4.1.14823.2.3.1.1.100.1017
This trap indicates that an AM/AP located at wlsrLocation is reporting that an AP wlsrTargetApBSSID has exceeded an upper threshold for Frame Retry Rate for AP wlsrTargetApBSSID.
Status: current Access: read-only
NOTIFICATION-TYPE    

wlsrFrameReceiveErrorRateExceeded 1.3.6.1.4.1.14823.2.3.1.1.100.1018
This trap indicates that an AM/AP located at wlsrLocation is reporting that an AP wlsrTargetApBSSID has exceeded an upper threshold for Frame Receive Error Rate for AP wlsrTargetApBSSID.
Status: current Access: read-only
NOTIFICATION-TYPE    

wlsrFrameFragmentationRateExceeded 1.3.6.1.4.1.14823.2.3.1.1.100.1019
This trap indicates that an AM/AP located at wlsrLocation is reporting that an AP wlsrTargetApBSSID has exceeded an upper threshold for Frame Fragmentation Rate for AP wlsrTargetApBSSID.
Status: current Access: read-only
NOTIFICATION-TYPE    

wlsrFrameBandWidthRateExceeded 1.3.6.1.4.1.14823.2.3.1.1.100.1020
This trap indicates that an AM/AP located at wlsrLocation is reporting that a station wlsrStaAddress has exceeded the allocated Bandwidth rate.
Status: current Access: read-only
NOTIFICATION-TYPE    

wlsrFrameLowSpeedRateExceeded 1.3.6.1.4.1.14823.2.3.1.1.100.1021
This trap indicates that an AM/AP located at wlsrLocation is reporting that a station wlsrStaAddress has exceeded the Low speed rate.
Status: current Access: read-only
NOTIFICATION-TYPE    

wlsrFrameNonUnicastRateExceeded 1.3.6.1.4.1.14823.2.3.1.1.100.1022
This trap indicates that an AM/AP located at wlsrLocation is reporting that a station wlsrStaAddress has exceeded the Non Unicast traffic rate.
Status: current Access: read-only
NOTIFICATION-TYPE    

wlsrLoadbalancingEnabled 1.3.6.1.4.1.14823.2.3.1.1.100.1023
This trap indicates that an AM/AP located at wlsrLocation is reporting that an AP with BSSID wlsrTargetApBSSID has enabled Load balancing.
Status: current Access: read-only
NOTIFICATION-TYPE    

wlsrChannelFrameRetryRateExceeded 1.3.6.1.4.1.14823.2.3.1.1.100.1024
This trap indicates that an AM/AP located at wlsrLocation is reporting that it exceeded an upper threshold for Frame Retry Rate.
Status: current Access: read-only
NOTIFICATION-TYPE    

wlsrChannelFrameFragmentationRateExceeded 1.3.6.1.4.1.14823.2.3.1.1.100.1025
This trap indicates that an AM/AP located at wlsrLocation is reporting that it exceeded an upper threshold for Frame Fragmentation Rate.
Status: current Access: read-only
NOTIFICATION-TYPE    

wlsrChannelFrameErrorRateExceeded 1.3.6.1.4.1.14823.2.3.1.1.100.1026
This trap indicates that an AM/AP located at wlsrLocation is reporting that it exceeded an upper threshold for Frame Error Rate.
Status: current Access: read-only
NOTIFICATION-TYPE    

wlsrSignatureMatch 1.3.6.1.4.1.14823.2.3.1.1.100.1027
This trap indicates that we detected a signature match.
Status: current Access: read-only
NOTIFICATION-TYPE    

wlsrChannelRateAnomaly 1.3.6.1.4.1.14823.2.3.1.1.100.1028
This trap indicates that an AP/AM at wlsrLocation detected frames of type wlsrFrameType on wlsrCurrentChannel which exceeds the configured IDS rate threshold.
Status: current Access: read-only
NOTIFICATION-TYPE    

wlsrNodeRateAnomaly 1.3.6.1.4.1.14823.2.3.1.1.100.1029
This trap indicates that an AP/AM at wlsrLocation detected frames of type wlsrFrameType transmitted by node wlsrNodeMac which exceeds the configured IDS rate threshold.
Status: current Access: read-only
NOTIFICATION-TYPE    

wlsrEAPRateAnomaly 1.3.6.1.4.1.14823.2.3.1.1.100.1030
This trap indicates that the number of EAP Handshake packets received by an AP/AM at wlsrLocation exceeds the configured IDS EAP Handshake rate.
Status: current Access: read-only
NOTIFICATION-TYPE    

wlsrSignalAnomaly 1.3.6.1.4.1.14823.2.3.1.1.100.1031
This trap indicates that an AP/AM at wlsrLocation detected a Signal Anomaly on wlsrCurrentChannel.
Status: current Access: read-only
NOTIFICATION-TYPE    

wlsrSequenceNumberAnomaly 1.3.6.1.4.1.14823.2.3.1.1.100.1032
This trap indicates that an AP/AM at wlsrLocation received packets which exceeds the acceptable sequence number difference. The acceptable sequence number difference is an IDS Configuration object.
Status: current Access: read-only
NOTIFICATION-TYPE    

wlsrDisconnectStationAttack 1.3.6.1.4.1.14823.2.3.1.1.100.1033
This trap indicates that an AP/AM detected a station Disconnect attack.
Status: current Access: read-only
NOTIFICATION-TYPE    

wlsrApFloodAttack 1.3.6.1.4.1.14823.2.3.1.1.100.1034
This trap is triggered when the number of spurious AP's detected by an AP/AM at wlsrLocation exceeds the configured IDS threshold.
Status: current Access: read-only
NOTIFICATION-TYPE    

wlsrAdhocNetwork 1.3.6.1.4.1.14823.2.3.1.1.100.1035
This trap indicates that an AP/AM at wlsrLocation detected an Adhoc Network. Node wlsrSourceMac is connected to an adhoc AP wlsrTargetApBSSID with wlsrTargetApSSID ssid.
Status: current Access: read-only
NOTIFICATION-TYPE    

wlsrWirelessBridge 1.3.6.1.4.1.14823.2.3.1.1.100.1036
This trap indicates that an AP/AM at wlsrLocation detected a Wireless Bridge. The detected bridge is between wlsrSourceMac and wlsrReceiverMac.
Status: current Access: read-only
NOTIFICATION-TYPE    

wlsrInvalidMacOUI 1.3.6.1.4.1.14823.2.3.1.1.100.1037
This trap indicates that an AP/AM at wlsrLocation detected an Invalid MAC OUI in transmission from the Node wlsrNodeMac. The invalid mac is the .
Status: current Access: read-only
NOTIFICATION-TYPE    

wlsrLoadbalancingDisabled 1.3.6.1.4.1.14823.2.3.1.1.100.1038
This trap indicates that an AM/AP located at wlsrLocation is reporting that an AP with BSSID wlsrTargetApBSSID has disabled Load balancing.
Status: current Access: read-only
NOTIFICATION-TYPE    

wlsrWEPMisconfiguration 1.3.6.1.4.1.14823.2.3.1.1.100.1039
This trap indicates that an Access Point has bad WEP configuration.
Status: current Access: read-only
NOTIFICATION-TYPE    

wlsrStaRepeatWEPIVViolation 1.3.6.1.4.1.14823.2.3.1.1.100.1040
This trap indicates that an AP/AM detected a Repeat WEP-IV violation. for a Station
Status: current Access: read-only
NOTIFICATION-TYPE    

wlsrStaWeakWEPIVViolation 1.3.6.1.4.1.14823.2.3.1.1.100.1041
This trap indicates that an AP/AM detected a Weak WEP-IV violation. for a Station
Status: current Access: read-only
NOTIFICATION-TYPE    

wlsrStaAssociatedToUnsecureAp 1.3.6.1.4.1.14823.2.3.1.1.100.1042
This trap indicates that a station with wlsrNodeMac associated with an Unsecure Access Point wlsrTargetApBSSID. This is detected by an Air Monitor located at wlsrLocation on channel wlsrCurrentChannel.
Status: current Access: read-only
NOTIFICATION-TYPE    

wlsrAdhocNetworkBridgeDetected 1.3.6.1.4.1.14823.2.3.1.1.100.1043
This trap indicates that an AM has detected an Adhoc network that is bridging to a wired network
Status: current Access: read-only
NOTIFICATION-TYPE    

wlsrInterferingApDetected 1.3.6.1.4.1.14823.2.3.1.1.100.1044
This trap indicates that an Interfering Access Point is detected by an Air Monitor located at wlsrLocation on channel wlsrCurrentChannel.
Status: current Access: read-only
NOTIFICATION-TYPE    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor