VPMT-OPT-MIB

File: VPMT-OPT-MIB.mib (11319 bytes)

Imported modules

RFC1155-SMI RFC-1212

Imported symbols

enterprises OBJECT-TYPE

Defined Types

DisplayString  
OCTET STRING    

Cdx6500VPMTCfgEntry  
SEQUENCE    
  cdx6500VPMTCfgEntryNum INTEGER
  cdx6500VPMTCfgvpType INTEGER
  cdx6500VPMTCfgvpNum INTEGER
  cdx6500VPMTCfgdslNum INTEGER
  cdx6500VPMTCfgds0Rate INTEGER
  cdx6500VPMTCfgsrcTimeSlot INTEGER
  cdx6500VPMTCfgdestTimeSlot INTEGER
  cdx6500VPMTCfglocalDialNum DisplayString
  cdx6500VPMTCfgsubAddress DisplayString
  cdx6500VPMTCfgcallPermission INTEGER
  cdx6500VPMTCfgnum-ccs-bypass-connections INTEGER
  cdx6500VPMTCfgPhysical-Port INTEGER

Defined Values

codex 1.3.6.1.4.1.449
OBJECT IDENTIFIER    

cdxProductSpecific 1.3.6.1.4.1.449.2
OBJECT IDENTIFIER    

cdx6500 1.3.6.1.4.1.449.2.1
OBJECT IDENTIFIER    

cdx6500Configuration 1.3.6.1.4.1.449.2.1.2
OBJECT IDENTIFIER    

cdx6500CfgGeneralGroup 1.3.6.1.4.1.449.2.1.2.2
OBJECT IDENTIFIER    

cdx6500VPMTCfgTable 1.3.6.1.4.1.449.2.1.2.2.26
An VPMT Configuration Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cdx6500VPMTCfgEntry

cdx6500VPMTCfgEntry 1.3.6.1.4.1.449.2.1.2.2.26.1
Entry in the VPMT Configuration Table. Each entry contains an index(cdx6500VPMTCfgEntryNum), and other configuration parameters fot a single VPMT table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cdx6500VPMTCfgEntry  

cdx6500VPMTCfgEntryNum 1.3.6.1.4.1.449.2.1.2.2.26.1.1
This indicate the VPMT Entry Number
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500VPMTCfgvpType 1.3.6.1.4.1.449.2.1.2.2.26.1.2
Specify the type of Virtual Port: NULL : No Configuration TDM-VOICE : Voice port operates on a configured DS0 PRI-VOICE : Voice port operates on a DS0 determined by the ISDN/QSIG D-Channel Transparent-CCS-VOICE : Voice port associated with a TBOP signaling channel BYPASS-VOICE : Voice and signaling transparently switched between configured DS0's TDM-DATA : Data port operates on a configured DS0 PRI-DATA : Data port operates on a DS0 determined by the ISDN/QSIG D-Channel BYPASS-DATA : Data transparently switched between configured DS0's CCS-BYPASS : Data or Voice switched between two ISDN/QSIG D-channel
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vpmt-ptype-null(1), vpmt-ptype-voice(2), vpmt-ptype-pri-voice(3), vpmt-ptype-bypass-voice(4), vpmt-ptype-tdm-data(5), vpmt-ptype-pri-data(6), vpmt-ptype-bypass-data(7), vpmt-ptype-trans-ccs-voice(8), vpmt-ptype-ccs-bypass(9), vpmt-ptype-bri-voice(10), vpmt-ptype-aam(11), vpmt-ptype-num(12)  

cdx6500VPMTCfgvpNum 1.3.6.1.4.1.449.2.1.2.2.26.1.3
Specify the Virtual Port Number, 100-254.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 100..254  

cdx6500VPMTCfgdslNum 1.3.6.1.4.1.449.2.1.2.2.26.1.4
Specify the Interface Number associated with this Virtual Port, 4-7 (1 based). Interface Number 1 supports TDM or PRI Data Ports only, Interface Number 2 and 3 not supported
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 4..7  

cdx6500VPMTCfgds0Rate 1.3.6.1.4.1.449.2.1.2.2.26.1.5
Specify the DS0 Rate. For TDM-DATA this parameter controls the speed of the port. For PRI-DATA this parameter controls the speed of the port only for outbound calls from this node. The speed for an inbound call is determined by the incoming Call Request.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vpmt-rate-56k(1), vpmt-rate-64k(2), vpmt-rate-num(3)  

cdx6500VPMTCfgsrcTimeSlot 1.3.6.1.4.1.449.2.1.2.2.26.1.6
Specify the Time Slot assignments No of DS0/B-channel 1-24 for T1 No of DS0/B-channel 1-31 for E1 - TDM-DATA No of DS0/B-channel 1-15,17-31 for E1 - TDM-VOICE Note: Only TDM-DATA virtual port type can use more than 1 time slot. INT. 1 Supports max. 31 data ports. INT. 4 & 5 Supports max 31 data ports and 30 voice ports INT. 6 & 7 Supports max 31 data ports and 30 voice ports
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500VPMTCfgdestTimeSlot 1.3.6.1.4.1.449.2.1.2.2.26.1.7
Specify the number of Time Slot on the Destination interface: 1-24 for T1 1-31 for E1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500VPMTCfglocalDialNum 1.3.6.1.4.1.449.2.1.2.2.26.1.8
Enter the Local Subscriber Address (ISDN number) for this virtual port/CCS Bypass connection. Use the space bar to blank the parameter. 1 to 20 characters For Outgoing Call: For Data Calls - This will be passed as the outgoing Calling Party number. Only valid characters are 0 - 9. For Voice Calls - This will be passed as the outgoing Calling Party number if the 'Calling Address Replacement' parameter is configured in the T1/E1 port record. Only valid characters are 0 - 9. For CCS Bypass - This parameter is not applicable. For Incoming Call: For Data Calls - The Called Party number received by the aggregate interface is compared to this parameter. Enter a trailing asterisk(*) as a wild-card. For Voice Calls - This will be passed as the ingoing Calling Party number if the 'Calling Address Replacement' parameter is configured in the T1/E1 port record. Only valid characters are 0 - 9. For CCS Bypass - The Called Party Number received by the aggregate interface is compared to this parameter. If a match is found, the ISDN/QSIG call will be forwarded to the adjacent T1/E1 port. If the first character is a '!' the call will be BYPASS if the remaining number does not match the Called Party Number. If the first character is a '@' the call will be will not be BYPASS if the remaining number matches the Called Party Number and the search for BYPASS match will be aborted
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..17)  

cdx6500VPMTCfgsubAddress 1.3.6.1.4.1.449.2.1.2.2.26.1.9
Outgoing Call: This subaddress will be sent in the Call Setup Message. Incomin Call: This subaddress will be used for call verification if provided
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..17)  

cdx6500VPMTCfgcallPermission 1.3.6.1.4.1.449.2.1.2.2.26.1.10
Clear Circuit Mode call permission criteria. This defines the types of call handling criteria for the ISDN line. OUT - Initiates call only; does not accept call. INC - Accepts call only; does not send call to the network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER out(1), inc(2)  

cdx6500VPMTCfgnum-ccs-bypass-connections 1.3.6.1.4.1.449.2.1.2.2.26.1.11
Specifies the maximum number of simultaneous CCS Bypass connections allowed to the called number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500VPMTCfgPhysical-Port 1.3.6.1.4.1.449.2.1.2.2.26.1.12
Specify the Physical Port Number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER