VIDEOFRAME-SIGMON-VM0002-MIB

File: VIDEOFRAME-SIGMON-VM0002-MIB.mib (24392 bytes)

Imported modules

RFC1155-SMI SNMPv2-SMI SNMPv2-TC
SNMPv2-CONF VIDEOFRAME-REGISTRATIONS-MIB VIDEOFRAME-GENERIC-MIB
VIDEOFRAME-SIGMON-MIB

Imported symbols

OBJECT-TYPE MODULE-IDENTITY OBJECT-IDENTITY
NOTIFICATION-TYPE IpAddress DisplayString
RowStatus MODULE-COMPLIANCE OBJECT-GROUP
vfMIBModules vfBoxId vfSigmonFrameModuleTypes
vfProductsVF200Reg vfFrameSlotNumber

Defined Types

Vm0002Entry  
SEQUENCE    
  vm0002SlotNumber INTEGER
  vm0002Active INTEGER
  vm0002FirmwareRev DisplayString
  vm0002Locate INTEGER

Vm0002SignalEntry  
SEQUENCE    
  vm0002SignalSlotNumber INTEGER
  vm0002SignalNumber INTEGER
  vm0002SignalName DisplayString
  vm0002SignalDescription DisplayString
  vm0002VSyncLossThreshold INTEGER
  vm0002VSyncLossPeriod INTEGER
  vm0002VSyncLossAlarmState INTEGER
  vm0002VSyncLossAlarmAck INTEGER
  vm0002VSyncLossTrapEnable INTEGER
  vm0002HSyncLossThreshold INTEGER
  vm0002HSyncLossPeriod INTEGER
  vm0002HSyncLossAlarmState INTEGER
  vm0002HSyncLossAlarmAck INTEGER
  vm0002HSyncLossTrapEnable INTEGER
  vm0002PedestalHighThreshold INTEGER
  vm0002PedestalHighPeriod INTEGER
  vm0002MeasuredPedestal INTEGER
  vm0002PedestalHighAlarmState INTEGER
  vm0002PedestalHighAlarmAck INTEGER
  vm0002PedestalHighTrapEnable INTEGER
  vm0002CurrentAplRaw INTEGER
  vm0002n100IRECalibrationSet INTEGER
  vm0002n100IRECalibrationValue INTEGER
  vm0002AplHighThreshold INTEGER
  vm0002AplHighDuration INTEGER
  vm0002AplHighAlarmState INTEGER
  vm0002AplHighAlarmAck INTEGER
  vm0002AplHighTrapEnable INTEGER
  vm0002AplLowThreshold INTEGER
  vm0002AplLowDuration INTEGER
  vm0002AplLowAlarmState INTEGER
  vm0002AplLowAlarmAck INTEGER
  vm0002AplLowTrapEnable INTEGER
  vm0002FrozenImageFilter INTEGER
  vm0002MaxFrozenDuration INTEGER
  vm0002FrozenAlarmState INTEGER
  vm0002FrozenAlarmAck INTEGER
  vm0002FrozenTrapEnable INTEGER
  vm0002BurstPresent INTEGER

Defined Values

videoframeSigmonVm0002MIB 1.3.6.1.4.1.4596.6.1.5
This MIB describes the device specific objects of the VM0002 Analog Video Monitoring module, and augments MIB-2, VF-GENERIC, and VF-SIGMON in the identification of this Videoframe Systems managed device. This module will be extended or modified as required. Videoframe Systems reserves the right to make changes in specification and other information contained in this document without prior notice. The reader should consult Videoframe Systems to determine whether any such changes have been made. In no event shall Videoframe Systems be liable for any incidental, indirect, special, or consequential damages whatsoever (including but not limited to lost profits) arising out of or related to this document or the information contained in it. Videoframe Systems grants vendors, end users, and other interested parties a non-exclusive license to use this specification in connection with the management of Videoframe Systems products. Copyright 2001 Videoframe, Inc.
MODULE-IDENTITY    

vfProductsVM0002Reg 1.3.6.1.4.1.4596.6.2.5.2
Videoframe VM0002 Analog Video Monitoring Module.
Status: current Access: read-only
OBJECT-IDENTITY    

vm0002AnalogVideo 1.3.6.1.4.1.4596.4.2.1.2
OBJECT IDENTIFIER    

vm0002Table 1.3.6.1.4.1.4596.4.2.1.2.1
Each row contains information about one VM0002 Analog Video module in the managed VF200 frame.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Vm0002Entry

vm0002Entry 1.3.6.1.4.1.4596.4.2.1.2.1.1
An Analog Video module entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Vm0002Entry  

vm0002SlotNumber 1.3.6.1.4.1.4596.4.2.1.2.1.1.1
The slot that this entry represents.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..12  

vm0002Active 1.3.6.1.4.1.4596.4.2.1.2.1.1.2
Indicates whether this entry is active (this module is in this slot).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

vm0002FirmwareRev 1.3.6.1.4.1.4596.4.2.1.2.1.1.3
The revision level of the firmware on this module.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

vm0002Locate 1.3.6.1.4.1.4596.4.2.1.2.1.1.4
Controls the locate indicator on the module and indicates its current state. Set to flash (1) to cause the locate LED on the front of the module to begin flashing. Set to off to stop flashing.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER flash(1), off(2)  

vm0002SignalTable 1.3.6.1.4.1.4596.4.2.1.2.2
Each row contains information about one channel of one VM0002 Analog Video module in the managed VF200 frame.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Vm0002SignalEntry

vm0002SignalEntry 1.3.6.1.4.1.4596.4.2.1.2.2.1
An Analog Video module channel entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Vm0002SignalEntry  

vm0002SignalSlotNumber 1.3.6.1.4.1.4596.4.2.1.2.2.1.1
The frame slot number that this entry represents.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..12  

vm0002SignalNumber 1.3.6.1.4.1.4596.4.2.1.2.2.1.2
The channel within the module to which this signal is connected.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..4  

vm0002SignalName 1.3.6.1.4.1.4596.4.2.1.2.2.1.3
The name of the signal connected to this channel.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

vm0002SignalDescription 1.3.6.1.4.1.4596.4.2.1.2.2.1.4
Descriptive identification of the signal connected to this channel.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..120)  

vm0002VSyncLossThreshold 1.3.6.1.4.1.4596.4.2.1.2.2.1.5
Number of frames with VSync errors to tolerate within the VSyncLossPeriod before alarming for this channel.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65075262  

vm0002VSyncLossPeriod 1.3.6.1.4.1.4596.4.2.1.2.2.1.6
The period, in milliseconds, over which vertical sync errors are accumulated for this channel.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

vm0002VSyncLossAlarmState 1.3.6.1.4.1.4596.4.2.1.2.2.1.7
The current state of the vertical sync loss alarm for this channel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ready(1), triggered(2)  

vm0002VSyncLossAlarmAck 1.3.6.1.4.1.4596.4.2.1.2.2.1.8
Set to acknowledge (3) to acknowledge a triggered vertical sync loss alarm for this channel.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER idle(1), unacknowledged(2), acknowledge(3)  

vm0002VSyncLossTrapEnable 1.3.6.1.4.1.4596.4.2.1.2.2.1.9
Set to enabled (1) to enable the vertical sync loss alarm trap for this channel.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vm0002HSyncLossThreshold 1.3.6.1.4.1.4596.4.2.1.2.2.1.10
Number of frames with horizontal sync errors to tolerate within the HSyncLossPeriod before alarming for this channel.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65075262  

vm0002HSyncLossPeriod 1.3.6.1.4.1.4596.4.2.1.2.2.1.11
The period, in milliseconds, over which horizontal sync loss errors are accumulated for this channel.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

vm0002HSyncLossAlarmState 1.3.6.1.4.1.4596.4.2.1.2.2.1.12
The current state of the horizontal sync loss alarm for this channel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ready(1), triggered(2)  

vm0002HSyncLossAlarmAck 1.3.6.1.4.1.4596.4.2.1.2.2.1.13
Set to acknowledge (3) to acknowledge a triggered horizontal sync loss alarm for this channel.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER idle(1), unacknowledged(2), acknowledge(3)  

vm0002HSyncLossTrapEnable 1.3.6.1.4.1.4596.4.2.1.2.2.1.14
Set to enabled (1) to enable the horizontal sync loss alarm trap for this channel.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vm0002PedestalHighThreshold 1.3.6.1.4.1.4596.4.2.1.2.2.1.15
Pedestal level above which to alarm for this channel, in units of 1/10th IRE.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..300  

vm0002PedestalHighPeriod 1.3.6.1.4.1.4596.4.2.1.2.2.1.16
The period, in milliseconds, that the pedestal must remain above the threshold to alarm for this channel.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

vm0002MeasuredPedestal 1.3.6.1.4.1.4596.4.2.1.2.2.1.17
The current measured pedestal level on this channel, in units of 1/10th IRE.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..300  

vm0002PedestalHighAlarmState 1.3.6.1.4.1.4596.4.2.1.2.2.1.18
The current state of the pedestal high alarm for this channel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ready(1), triggered(2)  

vm0002PedestalHighAlarmAck 1.3.6.1.4.1.4596.4.2.1.2.2.1.19
Set to acknowledge (3) to acknowledge a triggered pedestal high alarm for this channel.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER idle(1), unacknowledged(2), acknowledge(3)  

vm0002PedestalHighTrapEnable 1.3.6.1.4.1.4596.4.2.1.2.2.1.20
Set to enabled (1) to enable the pedestal high alarm trap for this channel.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vm0002CurrentAplRaw 1.3.6.1.4.1.4596.4.2.1.2.2.1.21
The current average luminance value on this channel, as a raw 10-bit sample value.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..1023  

vm0002n100IRECalibrationSet 1.3.6.1.4.1.4596.4.2.1.2.2.1.22
Set to 'go' (2) to set the value of the 100 IRE channel calibration to the current average luminance value on this channel.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ready(1), go(2), notReady(3)  

vm0002n100IRECalibrationValue 1.3.6.1.4.1.4596.4.2.1.2.2.1.23
The current raw luminance value used as the 100 IRE reference on this channel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..1023  

vm0002AplHighThreshold 1.3.6.1.4.1.4596.4.2.1.2.2.1.24
The high APL alarm threshold for this channel, in IRE.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..150  

vm0002AplHighDuration 1.3.6.1.4.1.4596.4.2.1.2.2.1.25
The high APL duration, in milliseconds, at which to alarm, for this channel.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

vm0002AplHighAlarmState 1.3.6.1.4.1.4596.4.2.1.2.2.1.26
The current state of the high APL alarm for this channel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ready(1), triggered(2)  

vm0002AplHighAlarmAck 1.3.6.1.4.1.4596.4.2.1.2.2.1.27
Set to acknowledge (3) to acknowledge a triggered high APL alarm for this channel.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER idle(1), unacknowledged(2), acknowledge(3)  

vm0002AplHighTrapEnable 1.3.6.1.4.1.4596.4.2.1.2.2.1.28
Set to enabled (1) to enable the high APL alarm trap for this channel.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vm0002AplLowThreshold 1.3.6.1.4.1.4596.4.2.1.2.2.1.29
The low APL alarm threshold for this channel, in IRE.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..100  

vm0002AplLowDuration 1.3.6.1.4.1.4596.4.2.1.2.2.1.30
The low APL duration, in milliseconds, at which to alarm, for this channel.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

vm0002AplLowAlarmState 1.3.6.1.4.1.4596.4.2.1.2.2.1.31
The current state of the low APL alarm for this channel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ready(1), triggered(2)  

vm0002AplLowAlarmAck 1.3.6.1.4.1.4596.4.2.1.2.2.1.32
Set to acknowledge (3) to acknowledge a triggered low APL alarm for this channel.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER idle(1), unacknowledged(2), acknowledge(3)  

vm0002AplLowTrapEnable 1.3.6.1.4.1.4596.4.2.1.2.2.1.33
Set to enabled (1) to enable the low APL alarm trap for this channel.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vm0002FrozenImageFilter 1.3.6.1.4.1.4596.4.2.1.2.2.1.34
The algorithm to use for the frozen image alarm for this channel.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..8  

vm0002MaxFrozenDuration 1.3.6.1.4.1.4596.4.2.1.2.2.1.35
The frozen image duration, in milliseconds, at which to alarm, for this channel.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

vm0002FrozenAlarmState 1.3.6.1.4.1.4596.4.2.1.2.2.1.36
The current state of the frozen image alarm for this channel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ready(1), triggered(2)  

vm0002FrozenAlarmAck 1.3.6.1.4.1.4596.4.2.1.2.2.1.37
Set to acknowledge (3) to acknowledge a triggered frozen image alarm for this channel.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER idle(1), unacknowledged(2), acknowledge(3)  

vm0002FrozenTrapEnable 1.3.6.1.4.1.4596.4.2.1.2.2.1.38
Set to enabled (1) to enable the frozen image alarm trap for this channel.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vm0002BurstPresent 1.3.6.1.4.1.4596.4.2.1.2.2.1.39
Indicates whether color burst is present on this channel.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER present(1), notPresent(2)  

vm0002AnalogVideoEvents 1.3.6.1.4.1.4596.4.2.1.2.3
OBJECT IDENTIFIER    

vm0002AnalogVideoEventsV2 1.3.6.1.4.1.4596.4.2.1.2.3.0
OBJECT IDENTIFIER    

analogVideoVSyncLossAlarm 1.3.6.1.4.1.4596.4.2.1.2.3.0.1
An Analog Video vertical sync loss alarm was triggered.
Status: current Access: read-write
NOTIFICATION-TYPE    

analogVideoHSyncLossAlarm 1.3.6.1.4.1.4596.4.2.1.2.3.0.2
An Analog Video horizontal sync loss alarm was triggered.
Status: current Access: read-write
NOTIFICATION-TYPE    

analogVideoPedestalHighAlarm 1.3.6.1.4.1.4596.4.2.1.2.3.0.3
An Analog Video pedestal high alarm was triggered.
Status: current Access: read-write
NOTIFICATION-TYPE    

analogVideoAPLHighAlarm 1.3.6.1.4.1.4596.4.2.1.2.3.0.4
An Analog Video APL high alarm was triggered.
Status: current Access: read-write
NOTIFICATION-TYPE    

analogVideoAPLLowAlarm 1.3.6.1.4.1.4596.4.2.1.2.3.0.5
An Analog Video APL low alarm was triggered.
Status: current Access: read-write
NOTIFICATION-TYPE    

analogVideoFrozenImageAlarm 1.3.6.1.4.1.4596.4.2.1.2.3.0.6
An Analog Video frozen image alarm was triggered.
Status: current Access: read-write
NOTIFICATION-TYPE