VERTICAL15-1600ROUTER-MIB
File:
VERTICAL15-1600ROUTER-MIB.mib (5947 bytes)
Imported modules
Imported symbols
Defined Values
| vertical |
1.3.6.1.4.1.2338 |
| OBJECT IDENTIFIER |
|
|
|
| v1600InstalledSlot |
1.3.6.1.4.1.2338.15.1 |
| The slot number in which the 1600-Router Card is installed. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| v1600Ser0ChannelWidth |
1.3.6.1.4.1.2338.15.2 |
| The number of channels used by the internal interface (S0) to connect to T1. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| v1600Ser0T1InterfaceSlot |
1.3.6.1.4.1.2338.15.3 |
| Slot number of T1 card configured for the WAN interface. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| v1600Ser0T1InterfacePort |
1.3.6.1.4.1.2338.15.4 |
| Port number of the T1 card configured for WAN interface. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..2 |
|
| v1600Ser0T1InterfaceStartChan |
1.3.6.1.4.1.2338.15.5 |
| Starting channel used by the internal interface (S0) to T1. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..24 |
|
| v1600FlashCardReady |
1.3.6.1.4.1.2338.15.6 |
| Ready = Flash card inserted , Not Ready = Flash card removed. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
ready(0), notReady(1) |
|
| v1600CardReadyLED |
1.3.6.1.4.1.2338.15.7 |
| On= 1600-Router Card is fully operational, Off=1600-Router Card is not Ready. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
on(0), off(1) |
|
| v1600CardErrorLED |
1.3.6.1.4.1.2338.15.8 |
| On= 1600-Router Card is not ready, Off=1600-Router Card is Ready. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
on(0), off(1) |
|
| v1600RouterOKLED |
1.3.6.1.4.1.2338.15.9 |
| Router OK LED Status. This variable is no longer used and will be
deprecated in the next release. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
on(0), off(1) |
|
| v1600ExtSerial1ConnOK |
1.3.6.1.4.1.2338.15.10 |
| Shows whether a cable is connected to the 5-in-1 External
Serial(S1) Connector. on=Connected , off=Not Connected |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
on(1), off(0) |
|
| v1600ExtSerial1DCD |
1.3.6.1.4.1.2338.15.11 |
| Shows the status of 5-in-1 External Serial(S1) DCD LED.
on=Link is up, off=Link is down |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
on(0), off(1) |
|
| v1600SwitchSlotNum |
1.3.6.1.4.1.2338.15.12 |
| Switch port Slot number. This variable is no longer used and will be
deprecated in the next release. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| v1600EthSwitchedPorts |
1.3.6.1.4.1.2338.15.13 |
| Number of Swithced Ethernet ports on 1600-Router Card. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| v1600SwitchStat |
1.3.6.1.4.1.2338.15.14 |
| More Information about Switch Port statistics. This variable is no
longer used and will be deprecated in the next release. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| v1600IntSerial0ConnOK |
1.3.6.1.4.1.2338.15.15 |
| Internal WAN interface (S0) connection to T1 LED status. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
on(0), off(1) |
|
| v1600IntSerial0DCD |
1.3.6.1.4.1.2338.15.16 |
| Internal WAN interface (S0) Link LED status.
on=Link is up, off=Link is down. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
on(0), off(1) |
|
| v1600RouterEthLinkOK |
1.3.6.1.4.1.2338.15.17 |
| Shows status of internal Ethernet Interface (E0) LED.
on=Link is up , off=Link is down |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
on(0), off(1) |
|
| v1600CardNotReady |
68 |
| Notification sent when the 1600-Router card is not ready at boot time. |
| TRAP-TYPE |
|
|
|
| v1600FlashCardNotReady |
69 |
| The Flash card on the 1600-Router Card is either removed or not inserted properly.
Please insert the Flash Card after you power down the system. |
| TRAP-TYPE |
|
|
|
| v1600RouterReady |
77 |
| The Router is ready and has booted from the image on the Flash Card. |
| TRAP-TYPE |
|
|
|
| v1600RouterNotReady |
78 |
| The Router is has not booted from the image on the Flash Card or the system
is still booting. Please open the 1600-Router console and make sure that the
Router boots from the image on the Flash Card for normal operation of the system. |
| TRAP-TYPE |
|
|
|