VERILINK-ENTERPRISE-NCMM13-MIB
File:
VERILINK-ENTERPRISE-NCMM13-MIB.mib (93373 bytes)
Imported modules
Imported symbols
Defined Types
| Ncmm13DS3PortEntry |
|
| SEQUENCE |
|
|
|
| |
ncmm13DS3PortNIDIndex |
INTEGER |
|
| |
ncmm13DS3PortIndex |
INTEGER |
|
| |
ncmm13DS3ModeControl |
INTEGER |
|
| |
ncmm13DS3LineType |
INTEGER |
|
| |
ncmm13DS3PerfControl |
INTEGER |
|
| |
ncmm13DS3AlarmControl |
INTEGER |
|
| |
ncmm13DS3FarEndControl |
INTEGER |
|
| |
ncmm13DS3BusType |
INTEGER |
|
| |
ncmm13DS3InbandControl |
INTEGER |
|
| |
ncmm13DS3CableLength |
INTEGER |
|
| |
ncmm13DS3EquipCode |
DisplayString |
|
| |
ncmm13DS3LocationIDCode |
DisplayString |
|
| |
ncmm13DS3FrameIDCode |
DisplayString |
|
| |
ncmm13DS3UnitCode |
DisplayString |
|
| |
ncmm13DS3FacilityIDCode |
DisplayString |
|
| |
ncmm13DS3PortIdCode |
DisplayString |
|
| |
ncmm13DS3GenIDCode |
DisplayString |
|
| Ncmm13StatEntry |
|
| SEQUENCE |
|
|
|
| |
ncmm13StatNIDIndex |
INTEGER |
|
| |
ncmm13StatIndex |
INTEGER |
|
| |
ncmm13StatAIS |
INTEGER |
|
| |
ncmm13StatIdle |
INTEGER |
|
| |
ncmm13StatYellowAlm |
INTEGER |
|
| |
ncmm13StatOOF |
INTEGER |
|
| |
ncmm13StatLOS |
INTEGER |
|
| |
ncmm13DS3NearEndLocalLoopback |
INTEGER |
|
| |
ncmm13DS3NearEndLineLoopback |
INTEGER |
|
| |
ncmm13DS3FarEndLineLoopback |
INTEGER |
|
| |
ncmm13T1NearEndLineLoopback |
DisplayString |
|
| |
ncmm13T1FarEndLineLoopback |
DisplayString |
|
| |
ncmm13FarEndAllT1LineLoopback |
INTEGER |
|
| |
ncmm13T1LocalLoopback |
DisplayString |
|
| Ncmm13CurrentEntry |
|
| SEQUENCE |
|
|
|
| |
ncmm13CurrentNIDIndex |
INTEGER |
|
| |
ncmm13CurrentIndex |
INTEGER |
|
| |
ncmm13CurrentCRCStatus |
INTEGER |
|
| |
ncmm13CurrentTimeStampSecs |
INTEGER |
|
| |
ncmm13CurrentTimeStampMSecs |
INTEGER |
|
| |
ncmm13CurrentIntervalSecsElaps |
INTEGER |
|
| |
ncmm13CurrentFarEndCCV |
Gauge |
|
| |
ncmm13CurrentFarEndCES |
Gauge |
|
| |
ncmm13CurrentFarEndCSES |
Gauge |
|
| |
ncmm13CurrentFarEndLUAS |
Gauge |
|
| |
ncmm13CurrentLCV |
Gauge |
|
| |
ncmm13CurrentLES |
Gauge |
|
| |
ncmm13CurrentLSES |
Gauge |
|
| |
ncmm13CurrentPCV |
Gauge |
|
| |
ncmm13CurrentPES |
Gauge |
|
| |
ncmm13CurrentPSES |
Gauge |
|
| |
ncmm13CurrentCCV |
Gauge |
|
| |
ncmm13CurrentCES |
Gauge |
|
| |
ncmm13CurrentCSES |
Gauge |
|
| |
ncmm13CurrentSEFS |
Gauge |
|
| |
ncmm13CurrentAISS |
Gauge |
|
| |
ncmm13CurrentLUAS |
Gauge |
|
| |
ncmm13CurrentLOOS |
Gauge |
|
| |
ncmm13CurrentLOFS |
Gauge |
|
| Ncmm13IntervalEntry |
|
| SEQUENCE |
|
|
|
| |
ncmm13IntervalNIDIndex |
INTEGER |
|
| |
ncmm13IntervalIndex |
INTEGER |
|
| |
ncmm13IntervalNumber |
INTEGER |
|
| |
ncmm13IntervalFarEndCCV |
Gauge |
|
| |
ncmm13IntervalFarEndCES |
Gauge |
|
| |
ncmm13IntervalFarEndCSES |
Gauge |
|
| |
ncmm13IntervalFarEndLUAS |
Gauge |
|
| |
ncmm13IntervalLCV |
Gauge |
|
| |
ncmm13IntervalLES |
Gauge |
|
| |
ncmm13IntervalLSES |
Gauge |
|
| |
ncmm13IntervalPCV |
Gauge |
|
| |
ncmm13IntervalPES |
Gauge |
|
| |
ncmm13IntervalPSES |
Gauge |
|
| |
ncmm13IntervalCCV |
Gauge |
|
| |
ncmm13IntervalCES |
Gauge |
|
| |
ncmm13IntervalCSES |
Gauge |
|
| |
ncmm13IntervalSEFS |
Gauge |
|
| |
ncmm13IntervalAISS |
Gauge |
|
| |
ncmm13IntervalLUAS |
Gauge |
|
| |
ncmm13IntervalLOSS |
Gauge |
|
| |
ncmm13IntervalLOFS |
Gauge |
|
| Ncmm13TotalEntry |
|
| SEQUENCE |
|
|
|
| |
ncmm13TotalNIDIndex |
INTEGER |
|
| |
ncmm13TotalIndex |
INTEGER |
|
| |
ncmm13TotalCRCStatus |
INTEGER |
|
| |
ncmm13TotalValidInterv |
INTEGER |
|
| |
ncmm13TotalFarEndCCV |
Gauge |
|
| |
ncmm13TotalFarEndCES |
Gauge |
|
| |
ncmm13TotalFarEndCSES |
Gauge |
|
| |
ncmm13TotalFarEndLUAS |
Gauge |
|
| |
ncmm13TotalLCV |
Gauge |
|
| |
ncmm13TotalLES |
Gauge |
|
| |
ncmm13TotalLSES |
Gauge |
|
| |
ncmm13TotalPCV |
Gauge |
|
| |
ncmm13TotalPES |
Gauge |
|
| |
ncmm13TotalPSES |
Gauge |
|
| |
ncmm13TotalCCV |
Gauge |
|
| |
ncmm13TotalCES |
Gauge |
|
| |
ncmm13TotalCSES |
Gauge |
|
| |
ncmm13TotalSEFS |
Gauge |
|
| |
ncmm13TotalAISS |
Gauge |
|
| |
ncmm13TotalLUAS |
Gauge |
|
| |
ncmm13TotalLOSS |
Gauge |
|
| |
ncmm13TotalLOFS |
Gauge |
|
| Ncmm13PerformanceSnapShotEntry |
|
| SEQUENCE |
|
|
|
| |
ncmm13SnapShotNIDIndex |
INTEGER |
|
| |
ncmm13SnapShotIndex |
INTEGER |
|
| |
ncmm13SnapShotCRCStatus |
INTEGER |
|
| |
ncmm13SnapShot |
INTEGER |
|
| |
ncmm13TimeStampSec |
INTEGER |
|
| |
ncmm13TimeStampMilliSec |
INTEGER |
|
| |
ncmm13SnapShotSecs |
INTEGER |
|
| |
ncmm13ResetPerfReg |
INTEGER |
|
| Ncmm13TCAQtrEntry |
|
| SEQUENCE |
|
|
|
| |
ncmm13TCAQtrNIDIndex |
INTEGER |
|
| |
ncmm13TCAQtrIndex |
INTEGER |
|
| |
ncmm13TCAQtrFarEndCCV |
INTEGER |
|
| |
ncmm13TCAQtrFarEndCES |
INTEGER |
|
| |
ncmm13TCAQtrFarEndCSES |
INTEGER |
|
| |
ncmm13TCAQtrFarEndLUAS |
INTEGER |
|
| |
ncmm13TCAQtrLCV |
INTEGER |
|
| |
ncmm13TCAQtrLES |
INTEGER |
|
| |
ncmm13TCAQtrLSES |
INTEGER |
|
| |
ncmm13TCAQtrPCV |
INTEGER |
|
| |
ncmm13TCAQtrPES |
INTEGER |
|
| |
ncmm13TCAQtrPSES |
INTEGER |
|
| |
ncmm13TCAQtrCCV |
INTEGER |
|
| |
ncmm13TCAQtrCES |
INTEGER |
|
| |
ncmm13TCAQtrCSES |
INTEGER |
|
| |
ncmm13TCAQtrSEFS |
INTEGER |
|
| |
ncmm13TCAQtrAISS |
INTEGER |
|
| |
ncmm13TCAQtrLUAS |
INTEGER |
|
| |
ncmm13TCAQtrLOSS |
INTEGER |
|
| |
ncmm13TCAQtrLOFS |
INTEGER |
|
| Ncmm13TCADayEntry |
|
| SEQUENCE |
|
|
|
| |
ncmm13TCADayNIDIndex |
INTEGER |
|
| |
ncmm13TCADayIndex |
INTEGER |
|
| |
ncmm13TCADayFarEndCCV |
INTEGER |
|
| |
ncmm13TCADayFarEndCES |
INTEGER |
|
| |
ncmm13TCADayFarEndCSES |
INTEGER |
|
| |
ncmm13TCADayFarEndLUAS |
INTEGER |
|
| |
ncmm13TCADayLCV |
INTEGER |
|
| |
ncmm13TCADayLES |
INTEGER |
|
| |
ncmm13TCADayLSES |
INTEGER |
|
| |
ncmm13TCADayPCV |
INTEGER |
|
| |
ncmm13TCADayPES |
INTEGER |
|
| |
ncmm13TCADayPSES |
INTEGER |
|
| |
ncmm13TCADayCCV |
INTEGER |
|
| |
ncmm13TCADayCES |
INTEGER |
|
| |
ncmm13TCADayCSES |
INTEGER |
|
| |
ncmm13TCADaySEFS |
INTEGER |
|
| |
ncmm13TCADayAISS |
INTEGER |
|
| |
ncmm13TCADayLUAS |
INTEGER |
|
| |
ncmm13TCADayLOSS |
INTEGER |
|
| |
ncmm13TCADayLOFS |
INTEGER |
|
| Ncmm13TxAlarmEntry |
|
| SEQUENCE |
|
|
|
| |
ncmm13TxAlarmNIDIndex |
INTEGER |
|
| |
ncmm13TxAlarmIndex |
INTEGER |
|
| |
ncmm13TxYellowAlarm |
INTEGER |
|
| |
ncmm13TxAIS |
INTEGER |
|
| |
ncmm13TxIdleSignal |
INTEGER |
|
| |
ncmm13TxFEBE |
INTEGER |
|
| |
ncmm13TxFEACAlarm |
INTEGER |
|
| Ncmm13DS3LPBKEntry |
|
| SEQUENCE |
|
|
|
| |
ncmm13DS3LPBKNIDIndex |
INTEGER |
|
| |
ncmm13DS3LPBKIndex |
INTEGER |
|
| |
ncmm13DS3LPBKAction |
INTEGER |
|
| Ncmm13T1LPBKEntry |
|
| SEQUENCE |
|
|
|
| |
ncmm13T1LPBKNIDIndex |
INTEGER |
|
| |
ncmm13T1LPBKIndex |
INTEGER |
|
| |
ncmm13T1LPBKAction |
INTEGER |
|
| Ncmm13T1ConfigEntry |
|
| SEQUENCE |
|
|
|
| |
ncmm13T1ConfigNIDIndex |
INTEGER |
|
| |
ncmm13T1LineIndex |
INTEGER |
|
| |
ncmm13T1FramingFormat |
INTEGER |
|
| |
ncmm13T1LineCoding |
INTEGER |
|
| |
ncmm13T1EnableNetOnesDensity |
INTEGER |
|
| |
ncmm13T1DensityPattern |
INTEGER |
|
| |
ncmm13T1PortService |
INTEGER |
|
Defined Values
| ncmm13DS3PortEntry |
1.3.6.1.4.1.321.1.3037.14000.1 |
| An entry in the m13 information table. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Ncmm13DS3PortEntry |
|
|
| ncmm13DS3PortNIDIndex |
1.3.6.1.4.1.321.1.3037.14000.1.1 |
| This variable indicates the node id value of the node. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..7fffffff |
|
| ncmm13DS3PortIndex |
1.3.6.1.4.1.321.1.3037.14000.1.2 |
| The index value which uniquely identifies the
DS3 interface to which this entry is applica-
ble. The interface identified by a particular
value of this index is the same interface as
identified by the same value as a dsx1LineIndex
object instance. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..65535 |
|
| ncmm13DS3ModeControl |
1.3.6.1.4.1.321.1.3037.14000.1.3 |
| The Mode Control Bit for M13. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
c-bit(1), m23-bit(2) |
|
| ncmm13DS3LineType |
1.3.6.1.4.1.321.1.3037.14000.1.4 |
| The Line Type for M13. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
bi-polar(1), uni-polar(2) |
|
| ncmm13DS3PerfControl |
1.3.6.1.4.1.321.1.3037.14000.1.5 |
| Performance Control Enabled/Disabled for M13. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(1), enabled(2) |
|
| ncmm13DS3AlarmControl |
1.3.6.1.4.1.321.1.3037.14000.1.6 |
| Alarm Control Enabled/Disabled for M13. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(1), enabled(2) |
|
| ncmm13DS3FarEndControl |
1.3.6.1.4.1.321.1.3037.14000.1.7 |
| Far End Control Enabled/Disabled for M13. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(1), enabled(2) |
|
| ncmm13DS3BusType |
1.3.6.1.4.1.321.1.3037.14000.1.8 |
| Inband Control Enabled/Disabled for M13. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
c-bus(1), a-bus(2) |
|
| ncmm13DS3InbandControl |
1.3.6.1.4.1.321.1.3037.14000.1.9 |
| Inband Control Enabled/Disabled for M13. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(1), enabled(2) |
|
| ncmm13DS3CableLength |
1.3.6.1.4.1.321.1.3037.14000.1.10 |
| Cable length for M13. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
short(1), long(2) |
|
| ncmm13DS3EquipCode |
1.3.6.1.4.1.321.1.3037.14000.1.11 |
| This is the Far End Equipment Identification code
that describes the specific piece of equipment.
It is sent within the Path
Identification Message. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..10) |
|
| ncmm13DS3LocationIDCode |
1.3.6.1.4.1.321.1.3037.14000.1.12 |
| This is the Far End Location Identification code
that describes the specific location of the
equipment. It is sent within the Path
Identification Message. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..11) |
|
| ncmm13DS3FrameIDCode |
1.3.6.1.4.1.321.1.3037.14000.1.13 |
| This is the Far End Frame Identification code
that identifies where the equipment is located
within a building at a given location.
It is sent within the Path Identification Message. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..10) |
|
| ncmm13DS3UnitCode |
1.3.6.1.4.1.321.1.3037.14000.1.14 |
| This is the Far End code
that identifies the equipment location within a bay.
It is sent within the Path
Identification Message. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..6) |
|
| ncmm13DS3FacilityIDCode |
1.3.6.1.4.1.321.1.3037.14000.1.15 |
| This code identifies a specific Far End DS3 path.
It is sent within the Path Identification Message. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..38) |
|
| ncmm13StatEntry |
1.3.6.1.4.1.321.1.3037.14001.1 |
| An entry in the m13 stats table. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Ncmm13StatEntry |
|
|
| ncmm13StatNIDIndex |
1.3.6.1.4.1.321.1.3037.14001.1.1 |
| This variable indicates the node id value of the node. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..7fffffff |
|
| ncmm13StatIndex |
1.3.6.1.4.1.321.1.3037.14001.1.2 |
| The index value which uniquely identifies the
DS1 interface to which this entry is applica-
ble. The interface identified by a particular
value of this index is the same interface as
identified by the same value as a dsx1LineIndex
object instance. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..65535 |
|
| ncmm13StatAIS |
1.3.6.1.4.1.321.1.3037.14001.1.3 |
| Port Status m13 AIS off/on. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
oFF(1), oN(2) |
|
| ncmm13StatIdle |
1.3.6.1.4.1.321.1.3037.14001.1.4 |
| port Status m13 Idle off/on. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
oFF(1), oN(2) |
|
| ncmm13StatYellowAlm |
1.3.6.1.4.1.321.1.3037.14001.1.5 |
| Port Status m13 Yellow Alarm off/on. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
oFF(1), oN(2) |
|
| ncmm13StatOOF |
1.3.6.1.4.1.321.1.3037.14001.1.6 |
| port status m13 off/on. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
oFF(1), oN(2) |
|
| ncmm13StatLOS |
1.3.6.1.4.1.321.1.3037.14001.1.7 |
| Port Status m13 LOS off/on. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
oFF(1), oN(2) |
|
| ncmm13DS3NearEndLocalLoopback |
1.3.6.1.4.1.321.1.3037.14001.1.8 |
| Port Status m13 Ds3 Local Loopback off/on. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
oFF(1), oN(2) |
|
| ncmm13DS3NearEndLineLoopback |
1.3.6.1.4.1.321.1.3037.14001.1.9 |
| Port Status m13 ds3 near end Line loopback off/on. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
oFF(1), oN(2) |
|
| ncmm13DS3FarEndLineLoopback |
1.3.6.1.4.1.321.1.3037.14001.1.10 |
| Port Status m13 ds3 far end line loopback off/on. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
oFF(1), oN(2) |
|
| ncmm13FarEndAllT1LineLoopback |
1.3.6.1.4.1.321.1.3037.14001.1.13 |
| Port Status m13 T1 Far End All T1 Line Loopback. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(1), enabled(2) |
|
| ncmm13CurrentEntry |
1.3.6.1.4.1.321.1.3037.14002.1 |
| An entry in the m13 Current table. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Ncmm13CurrentEntry |
|
|
| ncmm13CurrentNIDIndex |
1.3.6.1.4.1.321.1.3037.14002.1.1 |
| This variable indicates the node id value of the node. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..7fffffff |
|
| ncmm13CurrentIndex |
1.3.6.1.4.1.321.1.3037.14002.1.2 |
| The index value which uniquely identifies the
m13 interface to which this entry is
applicable. The interface identified by a
particular value of this index is the same
interface as identified by the same value an
ncmhdmLineIndex object instance. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..65535 |
|
| ncmm13CurrentCRCStatus |
1.3.6.1.4.1.321.1.3037.14002.1.3 |
| Current CRC4 Status. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(1) |
|
| ncmm13CurrentTimeStampSecs |
1.3.6.1.4.1.321.1.3037.14002.1.4 |
| Current Time in seconds. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..65535 |
|
| ncmm13CurrentTimeStampMSecs |
1.3.6.1.4.1.321.1.3037.14002.1.5 |
| Current Time in milliseconds. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..65535 |
|
| ncmm13CurrentIntervalSecsElaps |
1.3.6.1.4.1.321.1.3037.14002.1.6 |
| Seconds elapsed in the current interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..65535 |
|
| ncmm13CurrentFarEndCCV |
1.3.6.1.4.1.321.1.3037.14002.1.7 |
| The counter associated with the number of
Far End C-bit Code Violations,
in the current 15 minute interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13CurrentFarEndCES |
1.3.6.1.4.1.321.1.3037.14002.1.8 |
| The counter associated with the number of
Far End C-bit Errored Seconds,
in the current 15 minute interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13CurrentFarEndCSES |
1.3.6.1.4.1.321.1.3037.14002.1.9 |
| The counter associated with the number of
Far End C-bit Severely Errored Seconds,
in the current 15 minute interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13CurrentFarEndLUAS |
1.3.6.1.4.1.321.1.3037.14002.1.10 |
| Far End Line Unavailable Seconds. The counter associated
with the number of Seconds the Far End m13 interface
was Out Of Service in the current 15 minute interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13CurrentLCV |
1.3.6.1.4.1.321.1.3037.14002.1.11 |
| The counter associated with the number of Line
Code Violations, a bipolar or excesive zero violation,
in the current 15 minute interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13CurrentLES |
1.3.6.1.4.1.321.1.3037.14002.1.12 |
| Line Errored Second Total. The counter associated
with the number of Seconds of in which one or more
LCV occurred in the current 15 minute interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13CurrentLSES |
1.3.6.1.4.1.321.1.3037.14002.1.13 |
| The counter associated with the number of
Line Severely Errored Seconds (LSES) in
the current 15 minute interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13CurrentPCV |
1.3.6.1.4.1.321.1.3037.14002.1.14 |
| The counter associated with the number
of Parity Code Violations (locally calculated P-bits
disagree with those received),
in the current 15 minute interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13CurrentPES |
1.3.6.1.4.1.321.1.3037.14002.1.15 |
| The counter associated with the number of Seconds
having at least one Parity Code Violation,
in the current 15 minute interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13CurrentPSES |
1.3.6.1.4.1.321.1.3037.14002.1.16 |
| The counter associated with the number of Seconds
having 44 or more Parity Code Violations,
in the current 15 minute interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13CurrentCCV |
1.3.6.1.4.1.321.1.3037.14002.1.17 |
| The counter associated with the number of
C-bit Code Violations,
in the current 15 minute interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13CurrentCES |
1.3.6.1.4.1.321.1.3037.14002.1.18 |
| The counter associated with the number of
C-bit Errored Seconds,
in the current 15 minute interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13CurrentCSES |
1.3.6.1.4.1.321.1.3037.14002.1.19 |
| The counter associated with the number of
C-bit Severely Errored Seconds,
in the current 15 minute interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13CurrentSEFS |
1.3.6.1.4.1.321.1.3037.14002.1.20 |
| The counter associated with the number of seconds
in which one or more Out of Frame occurred
in the current 15 minute interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13CurrentAISS |
1.3.6.1.4.1.321.1.3037.14002.1.21 |
| The counter associated with the number of Seconds
in which one or more incoming AISS was detected
in the current 15 minute interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13CurrentLUAS |
1.3.6.1.4.1.321.1.3037.14002.1.22 |
| The counter associated with the number of Seconds
in which one or more incoming LUAS was detected
in the current 15 minute interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13CurrentLOOS |
1.3.6.1.4.1.321.1.3037.14002.1.23 |
| The counter associated with the number of Seconds
the m13 interface was Out Of Service
in the current 15 minute interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13CurrentLOFS |
1.3.6.1.4.1.321.1.3037.14002.1.24 |
| The counter associated with the number of Seconds
Of system Loss Of Signal (LOS) in the current
15 minute interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13IntervalEntry |
1.3.6.1.4.1.321.1.3037.14003.1 |
| An entry in the m13 Interval table. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Ncmm13IntervalEntry |
|
|
| ncmm13IntervalNIDIndex |
1.3.6.1.4.1.321.1.3037.14003.1.1 |
| This variable indicates the node id value of the node. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..7fffffff |
|
| ncmm13IntervalIndex |
1.3.6.1.4.1.321.1.3037.14003.1.2 |
| The index value which uniquely identifies the
m13 interface to which this entry is
applicable. The interface identified by a
particular value of this index is the same
interface as identified by the same value an
ncmhdmLineIndex object instance. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..65535 |
|
| ncmm13IntervalNumber |
1.3.6.1.4.1.321.1.3037.14003.1.3 |
| A number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is
the least recently completed 15 minutes inter-
val (assuming that all 96 intervals are
valid). |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..96 |
|
| ncmm13IntervalFarEndCCV |
1.3.6.1.4.1.321.1.3037.14003.1.4 |
| The counter associated with the number of
Far End C-bit Code Violations,
in the previous 15 minute interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13IntervalFarEndCES |
1.3.6.1.4.1.321.1.3037.14003.1.5 |
| The counter associated with the number of
Far End C-bit Errored Seconds,
in the current 15 minute interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13IntervalFarEndCSES |
1.3.6.1.4.1.321.1.3037.14003.1.6 |
| The counter associated with the number of
Far End C-bit Severely Errored Seconds,
in the current 15 minute interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13IntervalFarEndLUAS |
1.3.6.1.4.1.321.1.3037.14003.1.7 |
| Far End Line Unavailable Seconds. The counter associated
with the number of Seconds the Far End m13 interface
was Out Of Service in the current 15 minute interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13IntervalLCV |
1.3.6.1.4.1.321.1.3037.14003.1.8 |
| The counter associated with the number of Line
Code Violations, a bipolar or excesive zero violation,
in the current 15 minute interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13IntervalLES |
1.3.6.1.4.1.321.1.3037.14003.1.9 |
| Line Errored Second Total. The counter associated
with the number of Seconds of in which one or more
LCV occurred in the current 15 minute interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13IntervalLSES |
1.3.6.1.4.1.321.1.3037.14003.1.10 |
| The counter associated with the number of
Line Severely Errored Seconds (LSES) in
the current 15 minute interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13IntervalPCV |
1.3.6.1.4.1.321.1.3037.14003.1.11 |
| The counter associated with the number
of Parity Code Violations (locally calculated P-bits
disagree with those received),
in the current 15 minute interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13IntervalPES |
1.3.6.1.4.1.321.1.3037.14003.1.12 |
| The counter associated with the number of Seconds
having at least one Parity Code Violation,
in the current 15 minute interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13IntervalPSES |
1.3.6.1.4.1.321.1.3037.14003.1.13 |
| The counter associated with the number of Seconds
having 44 or more Parity Code Violations,
in the current 15 minute interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13IntervalCCV |
1.3.6.1.4.1.321.1.3037.14003.1.14 |
| The counter associated with the number of
C-bit Code Violations,
in the current 15 minute interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13IntervalCES |
1.3.6.1.4.1.321.1.3037.14003.1.15 |
| The counter associated with the number of
C-bit Errored Seconds,
in the current 15 minute interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13IntervalCSES |
1.3.6.1.4.1.321.1.3037.14003.1.16 |
| The counter associated with the number of
C-bit Severely Errored Seconds,
in the current 15 minute interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13IntervalSEFS |
1.3.6.1.4.1.321.1.3037.14003.1.17 |
| The counter associated with the number of seconds
in which one or more Out of Frame occurred
in the current 15 minute interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13IntervalAISS |
1.3.6.1.4.1.321.1.3037.14003.1.18 |
| The counter associated with the number of Seconds
in which one or more incoming AIS was detected
in the current 15 minute interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13IntervalLUAS |
1.3.6.1.4.1.321.1.3037.14003.1.19 |
| The counter associated with the number of Seconds
the m13 interface was Out Of Service
in the current 15 minute interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13IntervalLOSS |
1.3.6.1.4.1.321.1.3037.14003.1.20 |
| The counter associated with the number of Seconds
Of system Loss Of Signal (LOS) in the current
15 minute interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13IntervalLOFS |
1.3.6.1.4.1.321.1.3037.14003.1.21 |
| The counter associated with the number of Seconds
Of system Loss Of Frame (LOF) in the current
15 minute interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13TotalEntry |
1.3.6.1.4.1.321.1.3037.14004.1 |
| An entry in the m13 Total table. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Ncmm13TotalEntry |
|
|
| ncmm13TotalNIDIndex |
1.3.6.1.4.1.321.1.3037.14004.1.1 |
| This variable indicates the node id value of the node. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..7fffffff |
|
| ncmm13TotalIndex |
1.3.6.1.4.1.321.1.3037.14004.1.2 |
| The index value which uniquely identifies the
m13 interface to which this entry is
applicable. The interface identified by a
particular value of this index is the same
interface as identified by the same value an
ncmhdmLineIndex object instance. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..65535 |
|
| ncmm13TotalCRCStatus |
1.3.6.1.4.1.321.1.3037.14004.1.3 |
| CRC4 Status. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(1) |
|
| ncmm13TotalValidInterv |
1.3.6.1.4.1.321.1.3037.14004.1.4 |
| The number of valid intervals. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..65535 |
|
| ncmm13TotalFarEndCCV |
1.3.6.1.4.1.321.1.3037.14004.1.5 |
| The counter associated with the number of
Far End C-bit Code Violations,
in the last 24 hour interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13TotalFarEndCES |
1.3.6.1.4.1.321.1.3037.14004.1.6 |
| The counter associated with the number of
Far End C-bit Errored Seconds,
in the last 24 hour interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13TotalFarEndCSES |
1.3.6.1.4.1.321.1.3037.14004.1.7 |
| The counter associated with the number of
Far End C-bit Severely Errored Seconds,
in the last 24 hour interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13TotalFarEndLUAS |
1.3.6.1.4.1.321.1.3037.14004.1.8 |
| Far End Line Unavailable Seconds. The counter associated
with the number of Seconds the Far End m13 interface
was Out Of Service in the last 24 hour interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13TotalLCV |
1.3.6.1.4.1.321.1.3037.14004.1.9 |
| The counter associated with the number of Line
Code Violations, a bipolar or excesive zero violation,
in the last 24 hour interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13TotalLES |
1.3.6.1.4.1.321.1.3037.14004.1.10 |
| Line Errored Second Total. The counter associated
with the number of Seconds of in which one or more
LCV occurred in the last 24 hour interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13TotalLSES |
1.3.6.1.4.1.321.1.3037.14004.1.11 |
| The counter associated with the number of Seconds
Of Line Severely Errored Seconds (LSES) in the last
24 hour interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13TotalPCV |
1.3.6.1.4.1.321.1.3037.14004.1.12 |
| The counter associated with the number
of Parity Code Violations (locally calculated P-bits
disagree with those received),
in the last 24 hour interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13TotalPES |
1.3.6.1.4.1.321.1.3037.14004.1.13 |
| The counter associated with the number of Seconds
having at least one Parity Code Violation,
in the last 24 hour interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13TotalPSES |
1.3.6.1.4.1.321.1.3037.14004.1.14 |
| The counter associated with the number of Seconds
having 44 or more Parity Code Violations,
in the last 24 hour interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13TotalCCV |
1.3.6.1.4.1.321.1.3037.14004.1.15 |
| The counter associated with the number of
C-bit Code Violations,
in the last 24 hour interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13TotalCES |
1.3.6.1.4.1.321.1.3037.14004.1.16 |
| The counter associated with the number of
C-bit Errored Seconds,
in the last 24 hour interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13TotalCSES |
1.3.6.1.4.1.321.1.3037.14004.1.17 |
| The counter associated with the number of
C-bit Severely Errored Seconds,
in the last 24 hour interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13TotalSEFS |
1.3.6.1.4.1.321.1.3037.14004.1.18 |
| The counter associated with the number of seconds
in which one or more Out of Frame occurred
in the last 24 hour interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13TotalAISS |
1.3.6.1.4.1.321.1.3037.14004.1.19 |
| The counter associated with the number of Seconds
in which one or more incoming AIS was detected
in the last 24 hour interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13TotalLUAS |
1.3.6.1.4.1.321.1.3037.14004.1.20 |
| The counter associated with the number of Seconds
the m13 interface was Out Of Service in the last 24
hour interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13TotalLOSS |
1.3.6.1.4.1.321.1.3037.14004.1.21 |
| The counter associated with the number of Seconds
Of system Loss Of Signal (LOS) in the last
24 hour interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13TotalLOFS |
1.3.6.1.4.1.321.1.3037.14004.1.22 |
| The counter associated with the number of Seconds
Of system Loss Of Frame (LOF) in the last
24 hour interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge |
|
|
| ncmm13SnapShotNIDIndex |
1.3.6.1.4.1.321.1.3037.14005.1.1 |
| The object specifies the node id index of the node. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..7fffffff |
|
| ncmm13SnapShotIndex |
1.3.6.1.4.1.321.1.3037.14005.1.2 |
| The index value which uniquely identifies the
m13 interface to which this entry is applica-
ble. The interface identified by a particular
value of this index is the same interface as
identified by the same value as a LineIndex
object instance. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..7fffffff |
|
| ncmm13SnapShotCRCStatus |
1.3.6.1.4.1.321.1.3037.14005.1.3 |
| CRC4 Status. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(1) |
|
| ncmm13SnapShot |
1.3.6.1.4.1.321.1.3037.14005.1.4 |
| The variable specifies the option to initiate snap shot
command. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
no(1), yes(2) |
|
| ncmm13TimeStampSec |
1.3.6.1.4.1.321.1.3037.14005.1.5 |
| The variable specifies the Time Stamp in Seconds . |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..7fffffff |
|
| ncmm13TimeStampMilliSec |
1.3.6.1.4.1.321.1.3037.14005.1.6 |
| The variable specifies the Time Stamp in milli Seconds . |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..65535 |
|
| ncmm13SnapShotSecs |
1.3.6.1.4.1.321.1.3037.14005.1.7 |
| The variable specifies number of seconds in the current interval. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..65535 |
|
| ncmm13ResetPerfReg |
1.3.6.1.4.1.321.1.3037.14005.1.8 |
| Reset Performance Monitoring registers. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
no(1), yes(2) |
|
| ncmm13TCAQtrEntry |
1.3.6.1.4.1.321.1.3037.14006.1 |
| An entry in the m13 table. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Ncmm13TCAQtrEntry |
|
|
| ncmm13TCAQtrNIDIndex |
1.3.6.1.4.1.321.1.3037.14006.1.1 |
| This variable indicates the node id value of the node. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..7fffffff |
|
| ncmm13TCAQtrIndex |
1.3.6.1.4.1.321.1.3037.14006.1.2 |
| The index value which uniquely identifies the
alert crossing threshold interface to which
this entry is applicable. The interface
identified by a particular value of this
index is the same interface as identified
by the same value an plcpLineIndex object
instance. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..65535 |
|
| ncmm13TCAQtrFarEndCCV |
1.3.6.1.4.1.321.1.3037.14006.1.3 |
| The performance alert threshold for m13
layer Far End C-bit Code Violation in 1/4 hour
boundary. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..4294967295 |
|
| ncmm13TCAQtrFarEndCES |
1.3.6.1.4.1.321.1.3037.14006.1.4 |
| The performance alert threshold for m13
Far End C-bit Errored Seconds,
in 1/4 hour boundary. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..4294967295 |
|
| ncmm13TCAQtrFarEndCSES |
1.3.6.1.4.1.321.1.3037.14006.1.5 |
| The performance alert threshold for m13
Far End C-bit Severely Errored Seconds,
in 1/4 hour boundary. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..4294967295 |
|
| ncmm13TCAQtrFarEndLUAS |
1.3.6.1.4.1.321.1.3037.14006.1.6 |
| The performance alert threshold for m13 layer
Far End Line Unavailable Seconds in 1/4 hour
boundary. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..4294967295 |
|
| ncmm13TCAQtrLCV |
1.3.6.1.4.1.321.1.3037.14006.1.7 |
| The performance alert threshold for m13
layer Line code Violation in 1/4 hour
boundary. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..4294967295 |
|
| ncmm13TCAQtrLES |
1.3.6.1.4.1.321.1.3037.14006.1.8 |
| The performance alert threshold for m13
layer Line Errored Second in 1/4 hour
boundary. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..4294967295 |
|
| ncmm13TCAQtrLSES |
1.3.6.1.4.1.321.1.3037.14006.1.9 |
| The performance alert threshold for m13
layer Line Severely Errored Second
in 1/4 hour boundary. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..4294967295 |
|
| ncmm13TCAQtrPCV |
1.3.6.1.4.1.321.1.3037.14006.1.10 |
| The performance alert threshold for m13
layer Parity Code Violation in 1/4 hour boundary. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..4294967295 |
|
| ncmm13TCAQtrPES |
1.3.6.1.4.1.321.1.3037.14006.1.11 |
| The performance alert threshold for m13
layer Parity Errored Second in 1/4 hour boundary. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..4294967295 |
|
| ncmm13TCAQtrPSES |
1.3.6.1.4.1.321.1.3037.14006.1.12 |
| The performance alert threshold for m13
layer Parity Severely Errored Second in 1/4 hour
boundary. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..4294967295 |
|
| ncmm13TCAQtrCCV |
1.3.6.1.4.1.321.1.3037.14006.1.13 |
| The performance alert threshold for m13
layer C-bit Code Violation in 1/4 hour boundary. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..4294967295 |
|
| ncmm13TCAQtrCES |
1.3.6.1.4.1.321.1.3037.14006.1.14 |
| The performance alert threshold for m13
Far End C-bit Errored Seconds,
layer Errored Second in 1/4 hour boundary. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..4294967295 |
|
| ncmm13TCAQtrCSES |
1.3.6.1.4.1.321.1.3037.14006.1.15 |
| The performance alert threshold for m13
layer C-bit Severely Errored Second in 1/4 hour
boundary. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..4294967295 |
|
| ncmm13TCAQtrSEFS |
1.3.6.1.4.1.321.1.3037.14006.1.16 |
| The performance alert threshold for m13
layer Severely Errored Framing Seconds
in 1/4 hour boundary. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..4294967295 |
|
| ncmm13TCAQtrAISS |
1.3.6.1.4.1.321.1.3037.14006.1.17 |
| The performance alert threshold for m13
layer Alarm Indication Signal Second
in 1/4 hour boundary. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..4294967295 |
|
| ncmm13TCAQtrLUAS |
1.3.6.1.4.1.321.1.3037.14006.1.18 |
| The performance alert threshold for m13
layer Unavailable Second in 1/4 hour
boundary. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..4294967295 |
|
| ncmm13TCAQtrLOSS |
1.3.6.1.4.1.321.1.3037.14006.1.19 |
| The performance alert threshold for m13
Loss of Signal (LOS) Seconds in 1/4 hour
boundary. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..4294967295 |
|
| ncmm13TCAQtrLOFS |
1.3.6.1.4.1.321.1.3037.14006.1.20 |
| The performance alert threshold for m13
Loss of Frame (LOF) Seconds in 1/4 hour
boundary. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..4294967295 |
|
| ncmm13TCADayEntry |
1.3.6.1.4.1.321.1.3037.14007.1 |
| An entry in the 24 hour m13 Alert Threshold Table. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Ncmm13TCADayEntry |
|
|
| ncmm13TCADayNIDIndex |
1.3.6.1.4.1.321.1.3037.14007.1.1 |
| This variable indicates the node id value of the node. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..7fffffff |
|
| ncmm13TCADayIndex |
1.3.6.1.4.1.321.1.3037.14007.1.2 |
| The index value which uniquely identifies the
alert crossing threshold interface to which
this entry is applicable. The interface
identified by a particular value of this
index is the same interface as identified
by the same value an plcpLineIndex object
instance. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..65535 |
|
| ncmm13TCADayFarEndCCV |
1.3.6.1.4.1.321.1.3037.14007.1.3 |
| The performance alert threshold for m13
layer Far End C-bit Code Violation in 24 hour
boundary. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..4294967295 |
|
| ncmm13TCADayFarEndCES |
1.3.6.1.4.1.321.1.3037.14007.1.4 |
| The performance alert threshold for m13
Far End C-bit Errored Seconds,
in 24 hour boundary. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..4294967295 |
|
| ncmm13TCADayFarEndCSES |
1.3.6.1.4.1.321.1.3037.14007.1.5 |
| The performance alert threshold for m13
Far End C-bit Severely Errored Seconds,
in 24 hour boundary. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..4294967295 |
|
| ncmm13TCADayFarEndLUAS |
1.3.6.1.4.1.321.1.3037.14007.1.6 |
| The performance alert threshold for m13 layer
Far End Line Unavailable Seconds in 24 hour
boundary. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..4294967295 |
|
| ncmm13TCADayLCV |
1.3.6.1.4.1.321.1.3037.14007.1.7 |
| The performance alert threshold for m13
layer Line code Violation in 24 hour
boundary. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..4294967295 |
|
| ncmm13TCADayLES |
1.3.6.1.4.1.321.1.3037.14007.1.8 |
| The performance alert threshold for m13
layer Line Errored Second in 24 hour
boundary. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..4294967295 |
|
| ncmm13TCADayLSES |
1.3.6.1.4.1.321.1.3037.14007.1.9 |
| The performance alert threshold for m13
layer Line Severely Errored Second
in 24 hour boundary. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..4294967295 |
|
| ncmm13TCADayPCV |
1.3.6.1.4.1.321.1.3037.14007.1.10 |
| The performance alert threshold for m13
layer Parity Code Violation in 24 hour boundary. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..4294967295 |
|
| ncmm13TCADayPES |
1.3.6.1.4.1.321.1.3037.14007.1.11 |
| The performance alert threshold for m13
layer Parity Errored Second in 24 hour boundary. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..4294967295 |
|
| ncmm13TCADayPSES |
1.3.6.1.4.1.321.1.3037.14007.1.12 |
| The performance alert threshold form 13
layer Parity Severely Errored Second in 24 hour
boundary. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..4294967295 |
|
| ncmm13TCADayCCV |
1.3.6.1.4.1.321.1.3037.14007.1.13 |
| The performance alert threshold for m13
layer C-bit Code Violation in 24 hour boundary. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..4294967295 |
|
| ncmm13TCADayCES |
1.3.6.1.4.1.321.1.3037.14007.1.14 |
| The performance alert threshold for m13
C-bit Errored Seconds, in 24 hour boundary. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..4294967295 |
|
| ncmm13TCADayCSES |
1.3.6.1.4.1.321.1.3037.14007.1.15 |
| The performance alert threshold for DS3
C-bit Severely Errored Seconds, in 24 hour
boundary. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..4294967295 |
|
| ncmm13TCADaySEFS |
1.3.6.1.4.1.321.1.3037.14007.1.16 |
| The performance alert threshold for m13
layer Severely Errored Framing Seconds
in 24 hour boundary. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..4294967295 |
|
| ncmm13TCADayAISS |
1.3.6.1.4.1.321.1.3037.14007.1.17 |
| The performance alert threshold for m13
layer Alarm Indication Signal Second
in 24 hour boundary. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..4294967295 |
|
| ncmm13TCADayLUAS |
1.3.6.1.4.1.321.1.3037.14007.1.18 |
| The performance alert threshold for m13
layer Unavailable Second in 24 hour
boundary. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..4294967295 |
|
| ncmm13TCADayLOSS |
1.3.6.1.4.1.321.1.3037.14007.1.19 |
| The performance alert threshold for m13
Loss of Signal (LOS) Seconds in 24 hour
boundary. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..4294967295 |
|
| ncmm13TCADayLOFS |
1.3.6.1.4.1.321.1.3037.14007.1.20 |
| The performance alert threshold for m13
Loss of Frame (LOF) Seconds in 24 hour
boundary. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..4294967295 |
|
| ncmm13TxAlarmEntry |
1.3.6.1.4.1.321.1.3037.14008.1 |
| An entry in the m13 Transmit Alarm table. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Ncmm13TxAlarmEntry |
|
|
| ncmm13TxAlarmNIDIndex |
1.3.6.1.4.1.321.1.3037.14008.1.1 |
| This variable indicates the node id value of the node. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..7fffffff |
|
| ncmm13TxAlarmIndex |
1.3.6.1.4.1.321.1.3037.14008.1.2 |
| The index value which uniquely identifies the
Transmit Alarm interface to which
this entry is applicable. The interface
identified by a particular value of this
index is the same interface as identified
by the same value an m13 LineIndex object
instance. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..65535 |
|
| ncmm13TxYellowAlarm |
1.3.6.1.4.1.321.1.3037.14008.1.3 |
| Transmit the near-end yellow alarm for m13. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enable(1), disable(2) |
|
| ncmm13TxAIS |
1.3.6.1.4.1.321.1.3037.14008.1.4 |
| Transmit the near-end AIS alarm for m13. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enable(1), disable(2) |
|
| ncmm13TxIdleSignal |
1.3.6.1.4.1.321.1.3037.14008.1.5 |
| Transmit the near-end Idle alarm for m13. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enable(1), disable(2) |
|
| ncmm13TxFEBE |
1.3.6.1.4.1.321.1.3037.14008.1.6 |
| Near end unit transmits the FEBE alarm for m13. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enable(1), disable(2) |
|
| ncmm13TxFEACAlarm |
1.3.6.1.4.1.321.1.3037.14008.1.7 |
| This object describes which, if any, FEAC
Alarm is enabled. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
no-FEAC-Alarm-enabled(1), eqpt-FailureSA-Alarm(2), los-HBER-Alarm(3), oof-Alarm(4), ais-Received-Alarm(5), idle-Received-Alarm(6), eqpt-NSA-Alarm(7), common-Eqpt-NSA-Alarm(8) |
|
| ncmm13DS3LPBKEntry |
1.3.6.1.4.1.321.1.3037.14009.1 |
| An entry in the m13 Loopback table. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Ncmm13DS3LPBKEntry |
|
|
| ncmm13DS3LPBKNIDIndex |
1.3.6.1.4.1.321.1.3037.14009.1.1 |
| This variable indicates the node id value of the node. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..7fffffff |
|
| ncmm13DS3LPBKIndex |
1.3.6.1.4.1.321.1.3037.14009.1.2 |
| The index value which uniquely identifies the
m13 interface to which this entry is
applicable. The interface identified by a
particular value of this index is the same
interface as identified by the same value an
ncmm13LineIndex object instance. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..65535 |
|
| ncmm13DS3LPBKAction |
1.3.6.1.4.1.321.1.3037.14009.1.3 |
| m13 DS3 Loopback Activation/Deactivation. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
no-Loopback(1), m13-DS3-Activate-Local(2), m13-DS3-Activate-Line(3), m13-DS3-Activate-FEAC-Far-End(4), m13-DS3-Activate-Inband-Far-End(5), m13-DS3-DeActivate-Local(6), m13-DS3-DeActivate-Line(7), m13-DS3-DeActivate-FEAC-Far-End(8), m13-DS3-DeActivate-Inband-Far-End(9) |
|
| ncmm13T1LPBKEntry |
1.3.6.1.4.1.321.1.3037.14010.1 |
| An entry in the m13 Loopback table. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Ncmm13T1LPBKEntry |
|
|
| ncmm13T1LPBKNIDIndex |
1.3.6.1.4.1.321.1.3037.14010.1.1 |
| This variable indicates the node id value of the node. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..7fffffff |
|
| ncmm13T1LPBKIndex |
1.3.6.1.4.1.321.1.3037.14010.1.2 |
| The index value which uniquely identifies the
m13 interface to which this entry is
applicable. The interface identified by a
particular value of this index is the same
interface as identified by the same value an
ncmm13LineIndex object instance. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..65535 |
|
| ncmm13T1LPBKAction |
1.3.6.1.4.1.321.1.3037.14010.1.3 |
| m13 Loopback Activate
if Line Type = 0 (DS3 Loopback)
1 No Active
2 Local Loopback
3 Line Loopback
4 FEAC Far End
5 Inband Far End
if Line Type = 1 (T1 Line Command)
6 1-28 T1 Line Loopback
if Line Type = 2(T1 Far End Line)
7 1-28 T1 Far End Loopback
if Line Type = 3(T1 Local Loopback )
8 1-28 T1 Local Loopback
m13 Loopback DeActivate
if Line Type = 0 (DS3 Loopback)
1 No Active
9 Local Loopback
10 Line Loopback
11 FEAC Far End
12 Inband Far End
if Line Type = 1 (T1 Line Command)
13 1-28 T1 Line Loopback
if Line Type = 2(T1 Far End Line)
14 1-28 T1 Far End Loopback
if Line Type = 3(T1 Local Loopback )
15 1-28 T1 Local Loopback. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
no-Loopback(1), m13-Activate-1-28-T1-Line(10), m13-Activate-All-T1-Line(11), m13-Activate-1-28-T1-Far-End(12), m13-Activate-All-T1-Far-End(13), m13-Activate-1-28-T1-Local(14), m13-Activate-All-T1-Local(15), m13-DeActivate-1-28-T1-Line(16), m13-DeActivate-All-T1-Line(17), m13-DeActivate-1-28-T1-Far-End(18), m13-DeActivate-All-T1-Far-End(19), m13-DeActivate-1-28-T1-Local(20), m13-DeActivate-All-T1-Local(21) |
|
| ncmm13T1ConfigEntry |
1.3.6.1.4.1.321.1.3037.14011.1 |
| An entry in the ncm m13 T1 Configuration table. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Ncmm13T1ConfigEntry |
|
|
| ncmm13T1ConfigNIDIndex |
1.3.6.1.4.1.321.1.3037.14011.1.1 |
| This object is the identifier of the node id index. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..7fffffff |
|
| ncmm13T1LineIndex |
1.3.6.1.4.1.321.1.3037.14011.1.2 |
| This object is the identifier of a Inter-
f on a managed device. If there is an ifEn-
try that is directly associated with this and
only this m13 interface, it should have the
same value as ifIndex. Otherwise, the value
exceeds ifNumber, and is a unique identifier
following this rule: inside interfaces (e.g.,
equipment side) with even numbers and outside
interfaces (e.g., network side) with odd
numbers. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..7fffffff |
|
| ncmm13T1LineCoding |
1.3.6.1.4.1.321.1.3037.14011.1.4 |
| This variable describes the variety of Zero
Code Suppression used on the link, which in
turn affects a number of its characteristics.
B8ZS refers to the use of a specified pat-
tern of normal bits and bipolar violations
which are used to replace a sequence of eight
zero bits.
AMI refers to a mode wherein no zero code
suppression is present and the line encoding
does not solve the problem directly. In this
application, the higher layer must provide data
which meets or exceeds the pulse density re-
quirements, such as inverting HDLC data. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
aMI(1), b8ZS(2) |
|
| ncmm13T1EnableNetOnesDensity |
1.3.6.1.4.1.321.1.3037.14011.1.5 |
| The variable specifies the Disable/Enable of the Network
One's Density. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(1), enabled(2) |
|
| ncmm13T1DensityPattern |
1.3.6.1.4.1.321.1.3037.14011.1.6 |
| This variable indicates what type of density network is
being sent on the port or line by the device. The values
mean :
'Disabled' refers to no network ones density exist.
'D80Zeros' refers to send a request for network one's density
of 80 zeroes density pattern.
'D15Zeros' refers to send a request for network one's density
of 15 zeroes density pattern.
'D12d5c80Zero'refers to send a request for 12.5% and 80 zeroes
network one's density pattern.
'TR-62411' refers to sending a request for TR6241
network density pattern.
'Other' refers to sending a network's density pattern
other than those described by this object[pvt]**. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
d80Zeros(1), d15Zeros(2), d12d5c80Zero(3), tR-62411(4) |
|
| ncmm13T1PortService |
1.3.6.1.4.1.321.1.3037.14011.1.7 |
| The variable specifies whether port state is in service or
not. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
out-of-service(1), in-service(2) |
|