VERILINK-ENTERPRISE-NCMJAPISDN-MIB

File: VERILINK-ENTERPRISE-NCMJAPISDN-MIB.mib (53425 bytes)

Imported modules

RFC1213-MIB

RFC-1212

VERILINK-ENTERPRISE-NCMALARM-MIB

Imported symbols

DisplayString

OBJECT-TYPE

ncm-japisdn

Defined Types

NcmJapPRIPortConfigEntry
SEQUENCE
	ncmJapPRIPortNIDIndex	INTEGER
	ncmJapPRIPortLineIndex	INTEGER
	ncmJapPRIPortInService	INTEGER
	ncmJapPRIPortNFASMode	INTEGER
	ncmJapPRIPortDChanMode	INTEGER
	ncmJapPRIPortDChanBits	INTEGER
	ncmJapPRIPortTimeslotMap	DisplayString
	ncmJapPRIPortSwitchType	INTEGER
	ncmJapPRIPortOwnNumPlan	INTEGER
	ncmJapPRIPortOwnNumType	INTEGER
	ncmJapPRIPortSecurityLevel	INTEGER
	ncmJapPRIPortConfigStatus	INTEGER
	ncmJapPRIPortSetConfig	INTEGER
	ncmJapPRICallProfCallRefCount	INTEGER
	ncmJapPRIL2AutoEstablish	INTEGER

NcmJapPRICallProfEntry
SEQUENCE
	ncmJapPRICallProfNIDIndex	INTEGER
	ncmJapPRICallProfLineIndex	INTEGER
	ncmJapPRICPCallProfileRef	INTEGER
	ncmJapPRICallProfCallDir	INTEGER
	ncmJapPRICallProfNumOwnDigit	INTEGER
	ncmJapPRICallProfOwnCallNum	DisplayString
	ncmJapPRICallProfExtNumPlan	INTEGER
	ncmJapPRICallProfExtNumType	INTEGER
	ncmJapPRICallProfExtNumDigit	INTEGER
	ncmJapPRICallProfExtCallNum	DisplayString
	ncmJapPRICallProfTransferMode	INTEGER
	ncmJapPRICallProfCallBandWth	INTEGER
	ncmJapPRICallProfMultiRateCnt	INTEGER
	ncmJapPRICallProfRateAdaptn	INTEGER
	ncmJapPRICallProfTestCallIntvl	INTEGER
	ncmJapPRICallProfCallStatus	INTEGER
	ncmJapPRICallProfCallAction	INTEGER
	ncmJapPRICPSetCallProf	INTEGER
	ncmJapPRICPSetCallProfResp	INTEGER
	ncmJapPRICPCallActionResp	INTEGER

NcmJapPRICallProfListEntry
SEQUENCE
	ncmJapPRICPListNIDIndex	INTEGER
	ncmJapPRICPListLineIndex	INTEGER
	ncmJapPRICPListIndex	INTEGER
	ncmJapPRICPListValidCPRefNum	INTEGER

NcmJapPRICurrentEntry
SEQUENCE
	ncmJapPRICurrNIDIndex	INTEGER
	ncmJapPRICurrLineIndex	INTEGER
	ncmJapPRICurrEndType	INTEGER
	ncmJapPRICurrTimestamp	INTEGER
	ncmJapPRICurrSecsInCurrIntvl	INTEGER
	ncmJapPRICurrInfoRx	INTEGER
	ncmJapPRICurrInfoTx	INTEGER
	ncmJapPRICurrCRCErrRx	INTEGER
	ncmJapPRICurrInvalidFrameRx	INTEGER
	ncmJapPRICurrFrameAbortRx	INTEGER
	ncmJapPRICurrDISCSRx	INTEGER
	ncmJapPRICurrDISCSTx	INTEGER
	ncmJapPRICurrFramerRx	INTEGER
	ncmJapPRICurrFramerTx	INTEGER
	ncmJapPRICurrLyr3ProtErr	INTEGER
	ncmJapPRICurrCallSetupSent	INTEGER
	ncmJapPRICurrCallSetupSentnFail	INTEGER
	ncmJapPRICurrCallSetupRx	INTEGER
	ncmJapPRICurrCallSetupRxnFail	INTEGER
	ncmJapPRICurrUnSupportMsgRx	INTEGER
	ncmJapPRICurrTstCalSetupSentnFail	INTEGER
	ncmJapPRICurrValidIntvls	INTEGER
	ncmJapPRICurrStatisticReset	INTEGER

NcmJapPRIIntervalEntry
SEQUENCE
	ncmJapPRIntvlNIDIndex	INTEGER
	ncmJapPRIntvlLineIndex	INTEGER
	ncmJapPRIntvlEndType	INTEGER
	ncmJapPRIntvlIndex	INTEGER
	ncmJapPRIntvlTimestamp	INTEGER
	ncmJapPRIntvlSecsInCurrIntvl	INTEGER
	ncmJapPRIntvlInfoRx	INTEGER
	ncmJapPRIntvlInfoTx	INTEGER
	ncmJapPRIntvlCRCErrRx	INTEGER
	ncmJapPRIntvlInvalidFrameRx	INTEGER
	ncmJapPRIntvlFrameAbortRx	INTEGER
	ncmJapPRIntvlDISCSRx	INTEGER
	ncmJapPRIntvlDISCSTx	INTEGER
	ncmJapPRIntvlFramerRx	INTEGER
	ncmJapPRIntvlFramerTx	INTEGER
	ncmJapPRIntvlLyr3ProtErr	INTEGER
	ncmJapPRIntvlCallSetupSent	INTEGER
	ncmJapPRIntvlCallSetupSentnFail	INTEGER
	ncmJapPRIntvlCallSetupRx	INTEGER
	ncmJapPRIntvlCallSetupRxnFail	INTEGER
	ncmJapPRIntvlUnSupportMsgRx	INTEGER
	ncmJapPRIntvlTstCalSetupSentnFail	INTEGER

NcmJapPRISecurOperEntry
SEQUENCE
	ncmJapPRISecOpNIDIndex	INTEGER
	ncmJapPRISecOpLineIndex	INTEGER
	ncmJapPRISecOpFirstNum	INTEGER
	ncmJapPRISecOpListype	INTEGER
	ncmJapPRISecOpCountNum	INTEGER
	ncmJapPRISecOpClearElement	INTEGER
	ncmJapPRISecOpStatus	INTEGER
	ncmJapPRISecOpAction	INTEGER

NcmJapPRISecurNumbEntry
SEQUENCE
	ncmJapPRISecNumNIDIndex	INTEGER
	ncmJapPRISecNumLineIndex	INTEGER
	ncmJapPRISecNumIndex	INTEGER
	ncmJapPRISecNumCount	INTEGER
	ncmJapPRISecNumNumber	DisplayString

NcmJapPRICallLogLineEntry
SEQUENCE
	ncmJapPRICaloglinNIDIndex	INTEGER
	ncmJapPRICaloglinLineIndex	INTEGER
	ncmJapPRICaloglinLineNum	INTEGER
	ncmJapPRICaloglinLogLine	DisplayString
	ncmJapPRICaloglinStatus	INTEGER

Defined Values

ncmJapPRIPortConfigTable		1.3.6.1.4.1.321.1.3038.8000
The Japanese PRI Port Configuration table .
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmJapPRIPortConfigEntry

ncmJapPRIPortConfigEntry		1.3.6.1.4.1.321.1.3038.8000.1
An entry in the Japanese PRI Port Configuration table .
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmJapPRIPortConfigEntry

ncmJapPRIPortNIDIndex		1.3.6.1.4.1.321.1.3038.8000.1.1
The object specifies the node id of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmJapPRIPortLineIndex		1.3.6.1.4.1.321.1.3038.8000.1.2
The index value which uniquely identifies the interface to which this entry is applicable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmJapPRIPortInService		1.3.6.1.4.1.321.1.3038.8000.1.3
The object specifies whether the PRI Port is in service or not.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmJapPRIPortNFASMode		1.3.6.1.4.1.321.1.3038.8000.1.4
The variable specifies the pri NFAS mode.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	no-Nfas(1), nfas-No-Backup(2), nfas-Backup(3)

ncmJapPRIPortDChanMode		1.3.6.1.4.1.321.1.3038.8000.1.5
The variable specifies the pri D-channel mode.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	normal(1), inverted(2)

ncmJapPRIPortDChanBits		1.3.6.1.4.1.321.1.3038.8000.1.6
The variable specifies the pri D-channel bits.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	chan-8-Bit(1), chan-7-Bit(2), chan-6-Bit(3), undefined(4)

ncmJapPRIPortTimeslotMap		1.3.6.1.4.1.321.1.3038.8000.1.7
The variable specifies the timeslot map.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

ncmJapPRIPortSwitchType		1.3.6.1.4.1.321.1.3038.8000.1.8
The variable specifies the pri switch type.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	sw-NTT(15)

ncmJapPRIPortOwnNumPlan		1.3.6.1.4.1.321.1.3038.8000.1.9
The variable specifies the pri own numbering plan.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	unkn-NumPlan(1)

ncmJapPRIPortOwnNumType		1.3.6.1.4.1.321.1.3038.8000.1.10
The variable specifies the pri own numbering type.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	unkn-NumType(1)

ncmJapPRIPortSecurityLevel		1.3.6.1.4.1.321.1.3038.8000.1.11
The variable specifies the fdl mode which is bit 0 of fdl Parameter1.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	no-Checks(1), own-Numbers(2), ext-Numbers(3), both-Numbers(4)

ncmJapPRIPortConfigStatus		1.3.6.1.4.1.321.1.3038.8000.1.12
The variable specifies the configuration result.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	configuration-OK(1), configuration-Error(2)

ncmJapPRIPortSetConfig		1.3.6.1.4.1.321.1.3038.8000.1.13
The set configuration operation that involves sending out the ACP message to set the configuration with the setup parameters
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	set-Config(1), not-in-use(2)

ncmJapPRICallProfCallRefCount		1.3.6.1.4.1.321.1.3038.8000.1.14
The variable specifies the number of valid call reference numbers
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmJapPRIL2AutoEstablish		1.3.6.1.4.1.321.1.3038.8000.1.15
The object specifies whether the PRI Port has an Auto establishment for Layer-2 or not.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmJapPRICallProfileTable		1.3.6.1.4.1.321.1.3038.8001
The PRI Call Profile table .
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmJapPRICallProfEntry

ncmJapPRICallProfEntry		1.3.6.1.4.1.321.1.3038.8001.1
An entry in the PRI Call Profile table .
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmJapPRICallProfEntry

ncmJapPRICallProfNIDIndex		1.3.6.1.4.1.321.1.3038.8001.1.1
The object specifies the node id of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmJapPRICallProfLineIndex		1.3.6.1.4.1.321.1.3038.8001.1.2
The index value which uniquely identifies the interface to which this entry is applicable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmJapPRICPCallProfileRef		1.3.6.1.4.1.321.1.3038.8001.1.3
The variable specifies the number of the call profile in the list (starting from one, then two and so on).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmJapPRICallProfCallDir		1.3.6.1.4.1.321.1.3038.8001.1.4
The variable specifies the call direction.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	no-Direction(1), incoming(2), outgoing(3), both-Directions(4)

ncmJapPRICallProfNumOwnDigit		1.3.6.1.4.1.321.1.3038.8001.1.5
The variable specifies the number of own digits.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmJapPRICallProfOwnCallNum		1.3.6.1.4.1.321.1.3038.8001.1.6
The variable specifies the own call number.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

ncmJapPRICallProfExtNumPlan		1.3.6.1.4.1.321.1.3038.8001.1.7
The variable specifies the external numbering plan.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	unkn-NumPlan(1)

ncmJapPRICallProfExtNumType		1.3.6.1.4.1.321.1.3038.8001.1.8
The variable specifies the external numbering type.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	unkn-NumType(1)

ncmJapPRICallProfExtNumDigit		1.3.6.1.4.1.321.1.3038.8001.1.9
The variable specifies the external number of digits.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmJapPRICallProfExtCallNum		1.3.6.1.4.1.321.1.3038.8001.1.10
The variable specifies the external call number.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

ncmJapPRICallProfTransferMode		1.3.6.1.4.1.321.1.3038.8001.1.11
The variable specifies the transfer mode.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	unrestricted-digital(8)

ncmJapPRICallProfCallBandWth		1.3.6.1.4.1.321.1.3038.8001.1.12
The variable specifies the call bandwidth.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	b1-64K(16), h0-6X64K(19), h11-24X64K(21)

ncmJapPRICallProfMultiRateCnt		1.3.6.1.4.1.321.1.3038.8001.1.13
The variable specifies the multirate count. Not use for the time being.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	mR-2(2), mR-4(4), mR-6(6), mR-8(8), mR-12(12), mR-23(23), mR-24(24), mR-30(30), mR-31(31)

ncmJapPRICallProfRateAdaptn		1.3.6.1.4.1.321.1.3038.8001.1.14
The variable specifies the rate adaptation.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	no-Adapt(1), adapt-56K(2)

ncmJapPRICallProfTestCallIntvl		1.3.6.1.4.1.321.1.3038.8001.1.15
The variable specifies the test call interval.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmJapPRICallProfCallStatus		1.3.6.1.4.1.321.1.3038.8001.1.16
The variable specifies the get call profile call status.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	fail-Takedown-Idle(1), successful-Setup(2), unknown(3)

ncmJapPRICallProfCallAction		1.3.6.1.4.1.321.1.3038.8001.1.17
The variable specifies the call profile call action.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	setup-Call(1), takedown-Call(2)

ncmJapPRICPSetCallProf		1.3.6.1.4.1.321.1.3038.8001.1.18
The variable specifies the call profile call action.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	set-CallProf(1), not-in-use(2)

ncmJapPRICPSetCallProfResp		1.3.6.1.4.1.321.1.3038.8001.1.19
The variable specifies the set call profile result
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	configuration-OK(1), configuration-Error(2)

ncmJapPRICPCallActionResp		1.3.6.1.4.1.321.1.3038.8001.1.20
The variable specifies the call action result
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	configuration-OK(1), configuration-Error(2)

ncmJapPRICallProfListTable		1.3.6.1.4.1.321.1.3038.8002
The PRI Call Profile List table .
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmJapPRICallProfListEntry

ncmJapPRICallProfListEntry		1.3.6.1.4.1.321.1.3038.8002.1
An entry in the PRI Call Profile List table .
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmJapPRICallProfListEntry

ncmJapPRICPListNIDIndex		1.3.6.1.4.1.321.1.3038.8002.1.1
The object specifies the node id of the node of the call profile list group.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmJapPRICPListLineIndex		1.3.6.1.4.1.321.1.3038.8002.1.2
The index value which uniquely identifies the interface to which this entry is applicable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmJapPRICPListIndex		1.3.6.1.4.1.321.1.3038.8002.1.3
The call profile list call reference index.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmJapPRICPListValidCPRefNum		1.3.6.1.4.1.321.1.3038.8002.1.4
The variable is the valid call reference number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmJapPRICurrentTable		1.3.6.1.4.1.321.1.3038.8003
The PRI Current Interval table .
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmJapPRICurrentEntry

ncmJapPRICurrentEntry		1.3.6.1.4.1.321.1.3038.8003.1
An entry in the PRI Current Interval table .
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmJapPRICurrentEntry

ncmJapPRICurrNIDIndex		1.3.6.1.4.1.321.1.3038.8003.1.1
The object specifies the node id of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmJapPRICurrLineIndex		1.3.6.1.4.1.321.1.3038.8003.1.2
The index value which uniquely identifies the interface to which this entry is applicable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmJapPRICurrEndType		1.3.6.1.4.1.321.1.3038.8003.1.3
The variable specifies the End Type .
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	near-End(1), far-End(2)

ncmJapPRICurrTimestamp		1.3.6.1.4.1.321.1.3038.8003.1.4
The object specifies the timestamp in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmJapPRICurrSecsInCurrIntvl		1.3.6.1.4.1.321.1.3038.8003.1.5
The object specifies the seconds in current interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmJapPRICurrInfoRx		1.3.6.1.4.1.321.1.3038.8003.1.6
The object specifies the current INFOs received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmJapPRICurrInfoTx		1.3.6.1.4.1.321.1.3038.8003.1.7
The object specifies the current INFOs transmitted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmJapPRICurrCRCErrRx		1.3.6.1.4.1.321.1.3038.8003.1.8
The object specifies the current CRC errors received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmJapPRICurrInvalidFrameRx		1.3.6.1.4.1.321.1.3038.8003.1.9
The object specifies the current invalid frames received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmJapPRICurrFrameAbortRx		1.3.6.1.4.1.321.1.3038.8003.1.10
The object specifies the current frame aborts received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmJapPRICurrDISCSRx		1.3.6.1.4.1.321.1.3038.8003.1.11
The object specifies the current DISCs received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmJapPRICurrDISCSTx		1.3.6.1.4.1.321.1.3038.8003.1.12
The object specifies the current DISCs transmitted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmJapPRICurrFramerRx		1.3.6.1.4.1.321.1.3038.8003.1.13
The object specifies the current framer received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmJapPRICurrFramerTx		1.3.6.1.4.1.321.1.3038.8003.1.14
The object specifies the current framer transmitted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmJapPRICurrLyr3ProtErr		1.3.6.1.4.1.321.1.3038.8003.1.15
The object specifies the current Layer 3 protocol errors.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmJapPRICurrCallSetupSent		1.3.6.1.4.1.321.1.3038.8003.1.16
The object specifies the current call setup sent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmJapPRICurrCallSetupSentnFail		1.3.6.1.4.1.321.1.3038.8003.1.17
The object specifies the current call setup sent and failed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmJapPRICurrCallSetupRx		1.3.6.1.4.1.321.1.3038.8003.1.18
The object specifies the current call setup received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmJapPRICurrCallSetupRxnFail		1.3.6.1.4.1.321.1.3038.8003.1.19
The object specifies the current call setup received and failed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmJapPRICurrUnSupportMsgRx		1.3.6.1.4.1.321.1.3038.8003.1.20
The object specifies the current unsupported message received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmJapPRICurrTstCalSetupSentnFail		1.3.6.1.4.1.321.1.3038.8003.1.21
The object specifies the current test call setups sent and failed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmJapPRICurrValidIntvls		1.3.6.1.4.1.321.1.3038.8003.1.22
A number between 1 and 96
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmJapPRICurrStatisticReset		1.3.6.1.4.1.321.1.3038.8003.1.23
The variable specifies the statistic reset operation.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	statistic-Reset(1), not-in-use(2)

ncmJapPRIIntervalTable		1.3.6.1.4.1.321.1.3038.8004
The PRI Interval table .
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmJapPRIIntervalEntry

ncmJapPRIIntervalEntry		1.3.6.1.4.1.321.1.3038.8004.1
An entry in the PRI Interval table .
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmJapPRIIntervalEntry

ncmJapPRIntvlNIDIndex		1.3.6.1.4.1.321.1.3038.8004.1.1
The object specifies the node id of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmJapPRIntvlLineIndex		1.3.6.1.4.1.321.1.3038.8004.1.2
The index value which uniquely identifies the interface to which this entry is applicable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmJapPRIntvlEndType		1.3.6.1.4.1.321.1.3038.8004.1.3
The variable specifies the End Type .
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	near-End(1), far-End(2)

ncmJapPRIntvlIndex		1.3.6.1.4.1.321.1.3038.8004.1.4
The interval index.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmJapPRIntvlTimestamp		1.3.6.1.4.1.321.1.3038.8004.1.5
The object specifies the interval timestamp in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmJapPRIntvlSecsInCurrIntvl		1.3.6.1.4.1.321.1.3038.8004.1.6
The object specifies the interval seconds in current interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmJapPRIntvlInfoRx		1.3.6.1.4.1.321.1.3038.8004.1.7
The object specifies the interval INFOs received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmJapPRIntvlInfoTx		1.3.6.1.4.1.321.1.3038.8004.1.8
The object specifies the interval INFOs transmitted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmJapPRIntvlCRCErrRx		1.3.6.1.4.1.321.1.3038.8004.1.9
The object specifies the interval CRC errors received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmJapPRIntvlInvalidFrameRx		1.3.6.1.4.1.321.1.3038.8004.1.10
The object specifies the interval invalid frames received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmJapPRIntvlFrameAbortRx		1.3.6.1.4.1.321.1.3038.8004.1.11
The object specifies the interval frame aborts received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmJapPRIntvlDISCSRx		1.3.6.1.4.1.321.1.3038.8004.1.12
The object specifies the interval DISCs received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmJapPRIntvlDISCSTx		1.3.6.1.4.1.321.1.3038.8004.1.13
The object specifies the interval DISCs transmitted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmJapPRIntvlFramerRx		1.3.6.1.4.1.321.1.3038.8004.1.14
The object specifies the interval framer received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmJapPRIntvlFramerTx		1.3.6.1.4.1.321.1.3038.8004.1.15
The object specifies the interval framer transmitted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmJapPRIntvlLyr3ProtErr		1.3.6.1.4.1.321.1.3038.8004.1.16
The object specifies the interval Layer 3 protocol errors.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmJapPRIntvlCallSetupSent		1.3.6.1.4.1.321.1.3038.8004.1.17
The object specifies the interval call setup sent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmJapPRIntvlCallSetupSentnFail		1.3.6.1.4.1.321.1.3038.8004.1.18
The object specifies the interval call setup sent and failed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmJapPRIntvlCallSetupRx		1.3.6.1.4.1.321.1.3038.8004.1.19
The object specifies the interval call setup received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmJapPRIntvlCallSetupRxnFail		1.3.6.1.4.1.321.1.3038.8004.1.20
The object specifies the interval call setup received and failed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmJapPRIntvlUnSupportMsgRx		1.3.6.1.4.1.321.1.3038.8004.1.21
The object specifies the interval unsupported message received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmJapPRIntvlTstCalSetupSentnFail		1.3.6.1.4.1.321.1.3038.8004.1.22
The object specifies the interval test call setups sent and failed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmJapPRISecurOperTable		1.3.6.1.4.1.321.1.3038.8005
The PRI Security Operation Table .
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmJapPRISecurOperEntry

ncmJapPRISecurOperEntry		1.3.6.1.4.1.321.1.3038.8005.1
An entry in the PRI Security Operation Table .
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmJapPRISecurOperEntry

ncmJapPRISecOpNIDIndex		1.3.6.1.4.1.321.1.3038.8005.1.1
The object specifies the node id of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmJapPRISecOpLineIndex		1.3.6.1.4.1.321.1.3038.8005.1.2
The index value which uniquely identifies the interface to which this entry is applicable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmJapPRISecOpFirstNum		1.3.6.1.4.1.321.1.3038.8005.1.3
The first item number of the present group of security number.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	zeroth(1), twelfth(13), twenty-Fourth(25), thirty-Sixth(37), fourty-Eighth(49)

ncmJapPRISecOpListype		1.3.6.1.4.1.321.1.3038.8005.1.4
The variable specifies the type of list: own or remote numbers.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	own-number(1), remote-number(2)

ncmJapPRISecOpCountNum		1.3.6.1.4.1.321.1.3038.8005.1.5
The variable specifies the number of numbers/elements in this group.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmJapPRISecOpClearElement		1.3.6.1.4.1.321.1.3038.8005.1.6
The variable specifies the element number of the number to be cleared.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmJapPRISecOpStatus		1.3.6.1.4.1.321.1.3038.8005.1.7
The variable specifies the result of writing security number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	configuration-OK(1), configuration-Error(2)

ncmJapPRISecOpAction		1.3.6.1.4.1.321.1.3038.8005.1.8
The operation that involves sending the corresponding ACP command to execute the specified action with all necessary parameters setup properly.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	clear-Security-List(1), set-Security-List(2)

ncmJapPRISecurNumbTable		1.3.6.1.4.1.321.1.3038.8006
The PRI Security Number table .
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmJapPRISecurNumbEntry

ncmJapPRISecurNumbEntry		1.3.6.1.4.1.321.1.3038.8006.1
An entry in the PRI Security Number table .
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmJapPRISecurNumbEntry

ncmJapPRISecNumNIDIndex		1.3.6.1.4.1.321.1.3038.8006.1.1
The object specifies the node id of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmJapPRISecNumLineIndex		1.3.6.1.4.1.321.1.3038.8006.1.2
The index value which uniquely identifies the interface to which this entry is applicable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmJapPRISecNumIndex		1.3.6.1.4.1.321.1.3038.8006.1.3
The index number of the security number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmJapPRISecNumCount		1.3.6.1.4.1.321.1.3038.8006.1.4
The number of digits of the security number.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmJapPRISecNumNumber		1.3.6.1.4.1.321.1.3038.8006.1.5
The variable specifies the security number.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

ncmJapPRICallLogLineTable		1.3.6.1.4.1.321.1.3038.8007
The PRI Call Log Line Table .
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmJapPRICallLogLineEntry

ncmJapPRICallLogLineEntry		1.3.6.1.4.1.321.1.3038.8007.1
An entry in the PRI Call Log Line Table .
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmJapPRICallLogLineEntry

ncmJapPRICaloglinNIDIndex		1.3.6.1.4.1.321.1.3038.8007.1.1
The object specifies the node id of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmJapPRICaloglinLineIndex		1.3.6.1.4.1.321.1.3038.8007.1.2
The index value which uniquely identifies the interface to which this entry is applicable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmJapPRICaloglinLineNum		1.3.6.1.4.1.321.1.3038.8007.1.3
The log line number of the log line to be displayed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmJapPRICaloglinLogLine		1.3.6.1.4.1.321.1.3038.8007.1.4
The log line to be displayed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

ncmJapPRICaloglinStatus		1.3.6.1.4.1.321.1.3038.8007.1.5
The variable specifies the result of listing the call log line.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	valid-CallLogLine(1), invalid-CallLogLine(2)