VERILINK-ENTERPRISE-NCMIDCSU-MIB

File: VERILINK-ENTERPRISE-NCMIDCSU-MIB.mib (36754 bytes)

Imported modules

RFC1213-MIB RFC1155-SMI RFC-1212
VERILINK-ENTERPRISE-NCMALARM-MIB

Imported symbols

DisplayString Gauge OBJECT-TYPE
ncm-idcsu

Defined Types

NcmidcsuConfigEntry  
SEQUENCE    
  ncmidcsucfgNIDIndex INTEGER
  ncmidcsuLineIndex INTEGER
  ncmidcsuNetLineBuildOut INTEGER
  ncmidcsuNetworkKeepAlive INTEGER
  ncmidcsuExcessiveError INTEGER
  ncmidcsuOutOfFrame INTEGER
  ncmidcsuFormat INTEGER
  ncmidcsuNetDensityEnforcement INTEGER
  ncmidcsuNetLossOfSignal INTEGER
  ncmidcsuJitterBuf INTEGER
  ncmidcsuTestSigCfgEnable INTEGER
  ncmidcsuTestSigCfgFrameSignal INTEGER
  ncmidcsuCfgRptSendPRM INTEGER
  ncmidcsuCfgRptPollFarEnd INTEGER
  ncmidcsuCfgRptDataLinkUnsolicit INTEGER
  ncmidcsuCfgRptAlmReporting INTEGER
  ncmidcsuCfgRptPRMType INTEGER
  ncmidcsuCfgCodeRegenCRC INTEGER
  ncmidcsuCfgCodeXYellowAlarm INTEGER
  ncmidcsuCfgCodeEQFIFO INTEGER
  ncmidcsuCfgCodeNETFIFO INTEGER
  ncmidcsuCfgCodeTranMode INTEGER
  ncmidcsuCfgCodeSend1sLnkIdle INTEGER
  ncmidcsuCfgAlmSelfTest INTEGER
  ncmidcsuCfgAlmEnableTestState INTEGER
  ncmidcsuCfgAlmUnframedMode INTEGER
  ncmidcsuCfgAlmOnEqLoop INTEGER
  ncmidcsuCfgAlmOnNetLoop INTEGER
  ncmidcsuCfgAlmOnPowerUpLoop INTEGER
  ncmidcsuCfgLoopRespLLB INTEGER
  ncmidcsuCfgLoopRespPLB INTEGER
  ncmidcsuCfgLoopRespELB INTEGER
  ncmidcsuCfgLoopRespRLB INTEGER
  ncmidcsuCfgLoopRespLLBTONE INTEGER
  ncmidcsuCfgLoopRespPLBTONE INTEGER
  ncmidcsuCfgSendReceiveInBandCode INTEGER

NcmidcsuThresholdIntervalEntry  
SEQUENCE    
  ncmidcsuThresholdNIDIndex INTEGER
  ncmidcsuThresholdIntervalIndex INTEGER
  ncmidcsuBERThreshold INTEGER
  ncmidcsubpvSecThreshold INTEGER
  ncmidcsubpvSecInterval INTEGER
  ncmidcsuESThreshold INTEGER
  ncmidcsuESInterval INTEGER
  ncmidcsuUASThreshold INTEGER
  ncmidcsuUASInterval INTEGER

NcmidcsuConfigOneEntry  
SEQUENCE    
  ncmidcsucfg1NIDIndex INTEGER
  ncmidcsuLineIndex1 INTEGER
  ncmidcsuDS0Channel DisplayString
  ncmidcsuRLBTimeoutIndex INTEGER
  ncmidcsuNetLofcIndexTime INTEGER
  ncmidcsuTiming INTEGER
  ncmidcsuLineCode INTEGER
  ncmidcsuMode INTEGER
  ncmidcsuClock INTEGER
  ncmidcsuScramble INTEGER
  ncmidcsuLosLead INTEGER
  ncmidcsuPortLoopEnable INTEGER
  ncmidcsuDataInvert INTEGER
  ncmidcsuTimingUnit INTEGER
  ncmidcsuAlarmReporting INTEGER

NcmidcsuDiagnosticEntry  
SEQUENCE    
  ncmidcsuDiagNIDIndex INTEGER
  ncmidcsuDiagnosticIndex INTEGER
  ncmidcsuAlarmSetDelay INTEGER
  ncmidcsuAlarmClearDelay INTEGER
  ncmidcsuAlarmEnable INTEGER
  ncmidcsuLoopback INTEGER
  ncmdteloops INTEGER
  ncmidcsuTestPattern INTEGER
  ncmidcsuResetPerfReg INTEGER
  ncmidcsuTestErrorCounter Gauge
  ncmidcsuTestSecondsRemain Gauge
  ncmidcsuTestTimeSeconds INTEGER
  ncmidcsuNetLOFCIndexTime INTEGER
  ncmidcsuChannelMask DisplayString
  ncmidcsuApplication INTEGER
  ncmidcsuTestIntervalIndex INTEGER

Defined Values

ncmidcsuConfigTable 1.3.6.1.4.1.321.1.3027.10000
The ncm idcsu configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NcmidcsuConfigEntry

ncmidcsuConfigEntry 1.3.6.1.4.1.321.1.3027.10000.1
An entry in the ncmidcsu configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NcmidcsuConfigEntry  

ncmidcsucfgNIDIndex 1.3.6.1.4.1.321.1.3027.10000.1.1
This variable indicates the node id value of the node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..7fffffff  

ncmidcsuLineIndex 1.3.6.1.4.1.321.1.3027.10000.1.2
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ncmidcsuNetLineBuildOut 1.3.6.1.4.1.321.1.3027.10000.1.3
The ncmidcsu net line build out.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER db-Zero(1), db-Seven-point-five(2), db-Fifteen(3)  

ncmidcsuNetworkKeepAlive 1.3.6.1.4.1.321.1.3027.10000.1.4
The ncmidcsu network keep alive varaible .
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), loop(2), ais(3), framed-all-ones(4)  

ncmidcsuExcessiveError 1.3.6.1.4.1.321.1.3027.10000.1.5
The Net/Eq has excessive errors.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER signal(1), ais(2)  

ncmidcsuOutOfFrame 1.3.6.1.4.1.321.1.3027.10000.1.6
The ncmidcsu Eq is out of frame (OOF).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER signal(1), ais(2)  

ncmidcsuFormat 1.3.6.1.4.1.321.1.3027.10000.1.7
The ncmidcsu Net/Eq format.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unframed(1), sf(2), esf(3), zbtsi(4)  

ncmidcsuNetDensityEnforcement 1.3.6.1.4.1.321.1.3027.10000.1.8
The ncmidcsu net density enforcement.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), fcc-part-68(2), pub-62411(3), eighty-zeroes(4), fifteen-zeroes(5)  

ncmidcsuNetLossOfSignal 1.3.6.1.4.1.321.1.3027.10000.1.9
The ncmidcsu Net/Eq uas interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ncmidcsuJitterBuf 1.3.6.1.4.1.321.1.3027.10000.1.10
The ncmidcsu Net/Eq Jitter buffer in bits.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER eq-Net-16-16(1), eq-Net-40-16(2), eq-Net-16-40(3), eq-Net-40-40(4)  

ncmidcsuTestSigCfgEnable 1.3.6.1.4.1.321.1.3027.10000.1.11
bit 1 of MSGOUT+47 for read or of MSGIN+47 for write is test signal enable in this test signal configuration message.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

ncmidcsuTestSigCfgFrameSignal 1.3.6.1.4.1.321.1.3027.10000.1.12
bit 7 of MSGOUT+47 for read or of MSGIN+47 for write is frame test signal in this test signal configuration message.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

ncmidcsuCfgRptSendPRM 1.3.6.1.4.1.321.1.3027.10000.1.13
bit 0 of MSGOUT+52 for read or MSGIN+52 for write is send prm in this configure report message.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

ncmidcsuCfgRptPollFarEnd 1.3.6.1.4.1.321.1.3027.10000.1.14
bit 1 of MSGOUT+52 for read or MSGIN+52 for write is poll far end in this configure report message.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

ncmidcsuCfgRptDataLinkUnsolicit 1.3.6.1.4.1.321.1.3027.10000.1.15
bit 2 of MSGOUT+52 for read or MSGIN+52 for write is data link unsolicited report in this configure report message.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

ncmidcsuCfgRptAlmReporting 1.3.6.1.4.1.321.1.3027.10000.1.16
bit 3 of MSGOUT+52 for read or MSGIN+52 for write is alarm reporting in this configure report message.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

ncmidcsuCfgRptPRMType 1.3.6.1.4.1.321.1.3027.10000.1.17
bit 4,5 of MSGOUT+52 for read or of MSGIN+52 for write is PRM type in this configure report message.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tELCO(1), uSER(2)  

ncmidcsuCfgCodeRegenCRC 1.3.6.1.4.1.321.1.3027.10000.1.18
bit 0,1 of MSGOUT+53 for read or MSGIN+53 for write is regenerate crc from net to dte or eq to net in this configure coding message.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER pass(1), net-to-Eq(2), eq-to-Net(3), both(4)  

ncmidcsuCfgCodeXYellowAlarm 1.3.6.1.4.1.321.1.3027.10000.1.19
bit 2,3 of MSGOUT+53 for read or MSGIN+53 for write is transcode yellow alarm from net to dte or eq to net in this configure coding message.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), net-to-Eq(2), eq-to-Net(3), both(4)  

ncmidcsuCfgCodeEQFIFO 1.3.6.1.4.1.321.1.3027.10000.1.20
bit 4 of MSGOUT+53 for read or MSGIN+53 for write is eq fifo in this configure coding message.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER fifteen-bits(1), forty-bits(2)  

ncmidcsuCfgCodeNETFIFO 1.3.6.1.4.1.321.1.3027.10000.1.21
bit 5 of MSGOUT+53 for read or MSGIN+53 for write is net fifo in this configure coding message.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER fifteen-bits(1), forty-bits(2)  

ncmidcsuCfgCodeTranMode 1.3.6.1.4.1.321.1.3027.10000.1.22
bit 6 of MSGOUT+53 for read or MSGIN+53 for write is transparent mode in this configure report message.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

ncmidcsuCfgCodeSend1sLnkIdle 1.3.6.1.4.1.321.1.3027.10000.1.23
bit 7 of MSGOUT+53 for read or MSGIN+53 for write is send ones data link idle code in this configure report message.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

ncmidcsuCfgAlmSelfTest 1.3.6.1.4.1.321.1.3027.10000.1.24
bit 0 of MSGOUT+54 for read or MSGIN+54 for write is enable power up self test in this configure alarm message.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

ncmidcsuCfgAlmEnableTestState 1.3.6.1.4.1.321.1.3027.10000.1.25
bit 1 of MSGOUT+54 for read or MSGIN+54 for write is enable alarms in test state in this configure alarm message.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

ncmidcsuCfgAlmUnframedMode 1.3.6.1.4.1.321.1.3027.10000.1.26
bit 2 of MSGOUT+54 for read or MSGIN+54 for write is alarms in unframe mode in this configure alarm message.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

ncmidcsuCfgAlmOnEqLoop 1.3.6.1.4.1.321.1.3027.10000.1.27
bit 3 of MSGOUT+54 for read or MSGIN+54 for write is alarm on eq loop loop in this configure alarm message.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

ncmidcsuCfgAlmOnNetLoop 1.3.6.1.4.1.321.1.3027.10000.1.28
bit 4 of MSGOUT+54 for read or MSGIN+54 for write is alarm on net loop in this configure alarm message.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

ncmidcsuCfgAlmOnPowerUpLoop 1.3.6.1.4.1.321.1.3027.10000.1.29
bit 5 of MSGOUT+54 for read or MSGIN+54 for write is alarm power up loop in this configure alarm message.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

ncmidcsuCfgLoopRespLLB 1.3.6.1.4.1.321.1.3027.10000.1.30
bit 0 of MSGOUT+55 for read or MSGIN+55 for respond to LLB in this configure Loop Response Message.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

ncmidcsuCfgLoopRespPLB 1.3.6.1.4.1.321.1.3027.10000.1.31
bit 1 of MSGOUT+55 for read or MSGIN+55 for respond to PLB in this configure Loop Response Message.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

ncmidcsuCfgLoopRespELB 1.3.6.1.4.1.321.1.3027.10000.1.32
bit 2 of MSGOUT+55 for read or MSGIN+55 for respond to ELB in this configure Loop Response Message.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

ncmidcsuCfgLoopRespRLB 1.3.6.1.4.1.321.1.3027.10000.1.33
bit 3 of MSGOUT+55 for read or MSGIN+55 for respond to RLB in this configure Loop Response Message.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

ncmidcsuCfgLoopRespLLBTONE 1.3.6.1.4.1.321.1.3027.10000.1.34
bit 4 of MSGOUT+55 for read or MSGIN+55 for respond to LLB (T1.403) in this configure Loop Response Message.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

ncmidcsuCfgLoopRespPLBTONE 1.3.6.1.4.1.321.1.3027.10000.1.35
bit 5 of MSGOUT+55 for read or MSGIN+55 for respond to PLB (T1.403) in this configure Loop Response Message.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

ncmidcsuCfgSendReceiveInBandCode 1.3.6.1.4.1.321.1.3027.10000.1.36
bit 6 of MSGOUT+55 for read or MSGIN+55 for enable to Send/Receive of in-band code.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ncmidcsuThresholdIntervalTable 1.3.6.1.4.1.321.1.3027.10001
The ncm idcsu threshold interval table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NcmidcsuThresholdIntervalEntry

ncmidcsuThresholdIntervalEntry 1.3.6.1.4.1.321.1.3027.10001.1
An entry in the ncmidcsu threshold interval table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NcmidcsuThresholdIntervalEntry  

ncmidcsuThresholdNIDIndex 1.3.6.1.4.1.321.1.3027.10001.1.1
This variable indicates the node id value of the node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..7fffffff  

ncmidcsuThresholdIntervalIndex 1.3.6.1.4.1.321.1.3027.10001.1.2
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ncmidcsuBERThreshold 1.3.6.1.4.1.321.1.3027.10001.1.3
The ncmidcsu Net/Eq ber threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), ten-to-Four(2), ten-to-Five(3), ten-to-Six(4), ten-to-Seven(5), ten-to-Eight(6), ten-to-Nine(7)  

ncmidcsubpvSecThreshold 1.3.6.1.4.1.321.1.3027.10001.1.4
The ncmidcsu Net/Eq bpv sec threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ncmidcsubpvSecInterval 1.3.6.1.4.1.321.1.3027.10001.1.5
The ncmidcsu Net/Eq bpv sec interval.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ncmidcsuESThreshold 1.3.6.1.4.1.321.1.3027.10001.1.6
The ncmidcsu Net/Eq es threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ncmidcsuESInterval 1.3.6.1.4.1.321.1.3027.10001.1.7
The ncmidcsu Net/Eq es interval.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ncmidcsuUASThreshold 1.3.6.1.4.1.321.1.3027.10001.1.8
The ncmidcsu Net/Eq uas threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ncmidcsuUASInterval 1.3.6.1.4.1.321.1.3027.10001.1.9
The ncmidcsu Net/Eq uas interval.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ncmidcsuConfigOneTable 1.3.6.1.4.1.321.1.3027.10002
The ncm idcsu configuration table1.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NcmidcsuConfigOneEntry

ncmidcsuConfigOneEntry 1.3.6.1.4.1.321.1.3027.10002.1
An entry in the ncmidcsu configuration table1.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NcmidcsuConfigOneEntry  

ncmidcsucfg1NIDIndex 1.3.6.1.4.1.321.1.3027.10002.1.1
This variable indicates the node id value of the node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..7fffffff  

ncmidcsuLineIndex1 1.3.6.1.4.1.321.1.3027.10002.1.2
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ncmidcsuDS0Channel 1.3.6.1.4.1.321.1.3027.10002.1.3
This variable indicates the channel assignment for the dsu for the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..255)  

ncmidcsuRLBTimeoutIndex 1.3.6.1.4.1.321.1.3027.10002.1.4
The ncmidcsu rlb timeout index.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ncmidcsuNetLofcIndexTime 1.3.6.1.4.1.321.1.3027.10002.1.5
The net lofc index time .
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ncmidcsuTiming 1.3.6.1.4.1.321.1.3027.10002.1.6
The ncmidcsu timing.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER timing(1), internal(2), external-422(3), reserved(4), net(5), eq(6), reserved-two(7), dsu(8)  

ncmidcsuLineCode 1.3.6.1.4.1.321.1.3027.10002.1.7
The ncmidcsu net/eq Line Code.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ami(1), b8zs(2)  

ncmidcsuMode 1.3.6.1.4.1.321.1.3027.10002.1.8
The ncmidcsu data transmission mode for the DS-0s channel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER mode-56k(1), mode-64k(2)  

ncmidcsuClock 1.3.6.1.4.1.321.1.3027.10002.1.9
The ncmidcsu clock for the data port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER sT(1), iNVST(2), tT(3)  

ncmidcsuScramble 1.3.6.1.4.1.321.1.3027.10002.1.10
The ncmidcsu data scrambling option .
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

ncmidcsuLosLead 1.3.6.1.4.1.321.1.3027.10002.1.11
This variable indicates the DTE lead bits for port. The DTE leads can be set by setting the relevant bit to 1 and reset by setting the relevant bit to zero. Bit Value Name Description 0 set the dsu port configuration to zero 0 1 DTR set uses DTR 1 2 RTS set uses RTS 2 4 DSR set uses DSR 3 8 CTS set uses CTS 4 16 DCD set uses DCD 5 32 LOS use both bits: bits set to use for alarm 6 64 LOS 0 = Disable LOS detect, 1=use RTS , 2 = DTR 7 128 DDSMode set for 56k DDS .
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ncmidcsuPortLoopEnable 1.3.6.1.4.1.321.1.3027.10002.1.12
The Port Loop Enable of the dsu of idscsu .
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

ncmidcsuDataInvert 1.3.6.1.4.1.321.1.3027.10002.1.13
This variable specifies the data invert for idscsu .
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ncmidcsuTimingUnit 1.3.6.1.4.1.321.1.3027.10002.1.14
This variable specifies if the DSU port is configured as timing unit for idscsu .
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ncmidcsuAlarmReporting 1.3.6.1.4.1.321.1.3027.10002.1.15
This variable specifies if the DSU port has to report Alarm to the SAM for ncmidcsu.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

ncmidcsuDiagnosticTable 1.3.6.1.4.1.321.1.3027.10003
The ncm idcsu diagnostic table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NcmidcsuDiagnosticEntry

ncmidcsuDiagnosticEntry 1.3.6.1.4.1.321.1.3027.10003.1
An entry in the ncmidcsu diagnostic table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NcmidcsuDiagnosticEntry  

ncmidcsuDiagNIDIndex 1.3.6.1.4.1.321.1.3027.10003.1.1
This variable indicates the node id value of the node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..7fffffff  

ncmidcsuDiagnosticIndex 1.3.6.1.4.1.321.1.3027.10003.1.2
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ncmidcsuAlarmSetDelay 1.3.6.1.4.1.321.1.3027.10003.1.3
The ncmidcsu alarm set delay.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ncmidcsuAlarmClearDelay 1.3.6.1.4.1.321.1.3027.10003.1.4
The ncmidcsu alarm clear delay.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ncmidcsuAlarmEnable 1.3.6.1.4.1.321.1.3027.10003.1.5
The ncmidcsu alarm reporting.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ncmidcsuLoopback 1.3.6.1.4.1.321.1.3027.10003.1.6
The ncmidcsu loop back config.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER csu-Payload-Loop-Back(1), line-Loop-Back(2), repeater-Loop-Back(3), csu-Equip-Loop-Back(4), csu-No-Loop-Back(5), deactivate-LLB-and-PLB(6), deactivate-ELB-and-RLB(7), deactivate-Payload-Loop-Back(8), send-Inband-Loop-Up(9), send-Inband-Loop-Down(10)  

ncmdteloops 1.3.6.1.4.1.321.1.3027.10003.1.7
The dte loops of the ncmidcsu .
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no-loop(1), near-on(2), near-off(3), far-on(4), far-off(5), repeater-loopback(6)  

ncmidcsuTestPattern 1.3.6.1.4.1.321.1.3027.10003.1.8
The ncmidcsu test pattern config.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no-test(1), qrss(2), one-in-eight(3), three-in-twenty-four(4), all-ones(5)  

ncmidcsuResetPerfReg 1.3.6.1.4.1.321.1.3027.10003.1.9
The ncmcsu reset performance monitoring register
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

ncmidcsuTestErrorCounter 1.3.6.1.4.1.321.1.3027.10003.1.10
The ncm idcsu test error counter in the test status
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

ncmidcsuTestSecondsRemain 1.3.6.1.4.1.321.1.3027.10003.1.11
The ncm idcsu test seconds remaining in the test status
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

ncmidcsuTestTimeSeconds 1.3.6.1.4.1.321.1.3027.10003.1.12
The idcsu test time duration. Enter Value (0-142, 255) 0 corresponds to 0 Sec (Default) 1 - 59 corresponds to 1-59 Seconds 60 - 118 corresponds to 1-59 Min 119 - 142 corresponds to 1-24 HR 255 corresponds to (Forever) option
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ncmidcsuNetLOFCIndexTime 1.3.6.1.4.1.321.1.3027.10003.1.13
The idcsu net lofc index time
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ncmidcsuChannelMask 1.3.6.1.4.1.321.1.3027.10003.1.14
The idcsu channel mask for the 24 channels
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..255)  

ncmidcsuApplication 1.3.6.1.4.1.321.1.3027.10003.1.15
The idcsu application mode
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), csu(2), smds(3)  

ncmidcsuTestIntervalIndex 1.3.6.1.4.1.321.1.3027.10003.1.16
The idcsu Test Inteval Index value used for test pattern (0 - config default).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER