VERILINK-ENTERPRISE-NCMGENERIC-MIB

File: VERILINK-ENTERPRISE-NCMGENERIC-MIB.mib (349958 bytes)

Imported modules

RFC1155-SMI	RFC1213-MIB	RFC-1212
VERILINK-ENTERPRISE-NCMALARM-MIB

Imported symbols

Gauge	DisplayString	OBJECT-TYPE
ncm-generic

Defined Types

NcmNodeCurrEntry
SEQUENCE
	ncmNodeCurrIndex	INTEGER
	ncmNodeCurrAddress	DisplayString
	ncmActiveNodeStatus	INTEGER

NcmNodeInfoEntry
SEQUENCE
	ncmNodeIndex	INTEGER
	ncmNodeAddress	DisplayString
	ncmTime	DisplayString
	ncmDate	DisplayString
	ncmNodeShelf	INTEGER
	ncmNodeID	INTEGER
	ncmControllerEqID	INTEGER

NcmShelfInfoEntry
SEQUENCE
	ncmShelfNIDIndex	INTEGER
	ncmShelfIndex	INTEGER
	ncmShelfNumber	INTEGER
	ncmShelfHardware	INTEGER
	ncmNumberofCards	INTEGER
	ncmListCardsInShelf	DisplayString

NcmCardInfoEntry
SEQUENCE
	ncmCardNIDIndex	INTEGER
	ncmCardIndex	INTEGER
	ncmFirmwareType	INTEGER
	ncmCimType	INTEGER
	ncmClearCardInfo	INTEGER

NcmShelfSyncSourceEntry
SEQUENCE
	ncmShelfSyncNIDIndex	INTEGER
	ncmShelfSyncSourceIndex	INTEGER
	ncmSourceOneShelfNum	INTEGER
	ncmSourceOneCardNum	INTEGER
	ncmSourceOneClockRef	INTEGER
	ncmAutoRestore1	INTEGER
	ncmSourceTwoShelfNum	INTEGER
	ncmSourceTwoCardNum	INTEGER
	ncmSourceTwoClockRef	INTEGER
	ncmAutoRestore2	INTEGER
	ncmSourceThreeShelfNum	INTEGER
	ncmSourceThreeCardNum	INTEGER
	ncmSourceThreeClockRef	INTEGER
	ncmAutoRestore3	INTEGER
	ncmShelfCurrentSyncSource	INTEGER

NcmCardSyncSourceEntry
SEQUENCE
	ncmCardSyncNIDIndex	INTEGER
	ncmCardSyncSourceIndex	INTEGER
	ncmCardReceiveClockFromShelf	INTEGER
	ncmCardSourceOneShelfNum	INTEGER
	ncmCardSourceOneCardNum	INTEGER
	ncmCardSourceOneClockRef	INTEGER
	ncmCardAutoRestore1	INTEGER
	ncmCardSourceTwoShelfNum	INTEGER
	ncmCardSourceTwoCardNum	INTEGER
	ncmCardSourceTwoClockRef	INTEGER
	ncmCardAutoRestore2	INTEGER
	ncmCardSourceThreeShelfNum	INTEGER
	ncmCardSourceThreeCardNum	INTEGER
	ncmCardSourceThreeClockRef	INTEGER
	ncmCardAutoRestore3	INTEGER
	ncmCardCurrentSyncSource	INTEGER

NcmIDPromEntry
SEQUENCE
	ncmIDPromNIDIndex	INTEGER
	ncmIDPromIndex	INTEGER
	ncmCardType	INTEGER
	ncmCardRevision	DisplayString
	ncmCardDate	DisplayString
	ncmCardSerialNumber	DisplayString
	ncmManufacturePartNumber	DisplayString
	ncmVendorCageCode	DisplayString
	ncmIDCimType	INTEGER
	ncmCimRevision	DisplayString
	ncmCimDate	DisplayString
	ncmCimSerialNumber	DisplayString
	ncmCimManufacturePartNumber	DisplayString
	ncmCimVendorCageCode	DisplayString

NcmE1PortConfigEntry
SEQUENCE
	ncmE1ConfigNIDIndex	INTEGER
	ncmE1PortLineIndex	INTEGER
	ncmE1PortCRC4	INTEGER
	ncmE1PortFaseAlarm	INTEGER
	ncmE1PortCarrierFailureAlarm	INTEGER
	ncmE1PortInbandISDNEnableDisable	INTEGER
	ncmE1PortRepeaterLoopbackTimeoutEnable	INTEGER
	ncmE1PortFraming	INTEGER
	ncmE1PortRepeaterLoopbackTimeout	INTEGER
	ncmE1PortCarrierFailureAlarmDeclareTime	INTEGER
	ncmE1PortServiceState	INTEGER
	ncmE1PortIdlePattern	INTEGER
	ncmE1TimeSlot	DisplayString
	ncmE1TimeSlotSelect	INTEGER

NcmE1PortStatusEntry
SEQUENCE
	ncmE1PortStatusNIDIndex	INTEGER
	ncmE1PortStatusIndex	INTEGER
	ncmE1PortCRC4Error	INTEGER
	ncmE1PortFramingSlip	INTEGER
	ncmE1PortRAI	INTEGER
	ncmE1PortLOFA	INTEGER
	ncmE1PortAIS	INTEGER
	ncmE1PortLOS	INTEGER
	ncmE1PortBPVThresholdExceeded	INTEGER
	ncmE1BlockErrorCounter	Gauge
	ncmE1CodeViolationMode	INTEGER
	ncmE1CurrentHDB3ORFEBEErrorCounts	Gauge
	ncmE1CurrentFrameErrorCounts	Gauge
	ncmE1CurrentCRC4ErrorCounts	Gauge
	ncmE1ResetPerfCount	INTEGER
	ncmE1PortSendRAI	INTEGER
	ncmE1PortSendAIS	INTEGER
	ncmE1PortRFA	INTEGER
	ncmE1PortBERThresholdExceeded	INTEGER
	ncmE1PortLLB	INTEGER
	ncmE1PortPLB	INTEGER
	ncmE1PortLOC	INTEGER
	ncmE1PortTestPattern	INTEGER

NcmE1CurrentEntry
SEQUENCE
	ncmE1CurrentNIDIndex	INTEGER
	ncmE1CurrentIndex	INTEGER
	ncmE1CurrentEndType	INTEGER
	ncmE1CRC4Status	INTEGER
	ncmE1Timestamp	INTEGER
	ncmE1Timestamp1	INTEGER
	ncmE1CurrentIntervalSec	INTEGER
	ncmE1CurrentASs	Gauge
	ncmE1CurrentUASs	Gauge
	ncmE1CurrentESs	Gauge
	ncmE1CurrentSESs	Gauge
	ncmE1CurrentFAE	Gauge
	ncmE1CurrentBBE	Gauge
	ncmE1CurrentSEFSs	Gauge
	ncmE1CurrentAISSs	Gauge
	ncmE1CurrentLOSSs	Gauge
	ncmE1CurrentLOFSs	Gauge
	ncmE1CurrentOOFSs	Gauge
	ncmE1CurrentCVPath	Gauge
	ncmE1CurrentCVLine	Gauge
	ncmE1CurrentESsLine	Gauge
	ncmE1CurrentSESsLine	Gauge
	ncmE1CurrentFECPath	Gauge
	ncmE1CurrentFECLine	Gauge

NcmE1IntervalEntry
SEQUENCE
	ncmE1IntervalNIDIndex	INTEGER
	ncmE1IntervalIndex	INTEGER
	ncmE1IntervalEndType	INTEGER
	ncmE1IntervalNumber	INTEGER
	ncmE1IntervalASs	Gauge
	ncmE1IntervalUASs	Gauge
	ncmE1IntervalESs	Gauge
	ncmE1IntervalSESs	Gauge
	ncmE1IntervalFAE	Gauge
	ncmE1IntervalBBE	Gauge
	ncmE1IntervalSEFSs	Gauge
	ncmE1IntervalAISSs	Gauge
	ncmE1IntervalLOSSs	Gauge
	ncmE1IntervalLOFSs	Gauge
	ncmE1IntervalOOFSs	Gauge
	ncmE1IntervalCVPath	Gauge
	ncmE1IntervalCVLine	Gauge
	ncmE1IntervalESsLine	Gauge
	ncmE1IntervalSESsLine	Gauge
	ncmE1IntervalFECPath	Gauge
	ncmE1IntervalFECLine	Gauge

NcmE1TotalEntry
SEQUENCE
	ncmE1TotalNIDIndex	INTEGER
	ncmE1TotalIndex	INTEGER
	ncmE1TotalEndType	INTEGER
	ncmE1NumberOfValidInterval	INTEGER
	ncmE1TotalASs	Gauge
	ncmE1TotalUASs	Gauge
	ncmE1TotalESs	Gauge
	ncmE1TotalSESs	Gauge
	ncmE1TotalFAE	Gauge
	ncmE1TotalBBE	Gauge
	ncmE1TotalSEFSs	Gauge
	ncmE1TotalAISSs	Gauge
	ncmE1TotalLOSSs	Gauge
	ncmE1TotalLOFSs	Gauge
	ncmE1TotalOOFSs	Gauge
	ncmE1TotalCVPath	Gauge
	ncmE1TotalCVLine	Gauge
	ncmE1TotalESsLine	Gauge
	ncmE1TotalSESsLine	Gauge
	ncmE1TotalFECPath	Gauge
	ncmE1TotalFECLine	Gauge

NcmE1PrevTotalEntry
SEQUENCE
	ncmE1PrevTotalNIDIndex	INTEGER
	ncmE1PrevTotalIndex	INTEGER
	ncmE1PrevTotalEndType	INTEGER
	ncmE1PrevTotalASs	Gauge
	ncmE1PrevTotalUASs	Gauge
	ncmE1PrevTotalESs	Gauge
	ncmE1PrevTotalSESs	Gauge
	ncmE1PrevTotalFAE	Gauge
	ncmE1PrevTotalBBE	Gauge
	ncmE1PrevTotalSEFSs	Gauge
	ncmE1PrevTotalAISSs	Gauge
	ncmE1PrevTotalLOSSs	Gauge
	ncmE1PrevTotalLOFSs	Gauge
	ncmE1PrevTotalOOFSs	Gauge
	ncmE1PrevTotalCVPath	Gauge
	ncmE1PrevTotalCVLine	Gauge
	ncmE1PrevTotalESsLine	Gauge
	ncmE1PrevTotalSESsLine	Gauge
	ncmE1PrevTotalFECPath	Gauge
	ncmE1PrevTotalFECLine	Gauge

NcmE1PerformanceSnapShotEntry
SEQUENCE
	ncmE1SnapShotNIDIndex	INTEGER
	ncmE1SnapShotIndex	INTEGER
	ncmE1SnapShotEndType	INTEGER
	ncmE1SnapShot	INTEGER
	ncmE1TimeStampSec	INTEGER
	ncmE1TimeMilliSec	INTEGER
	ncmE1SecInCurrInterval	INTEGER
	ncmE1ResetPerfReg	INTEGER

NcmE1PortLatchedStatusEntry
SEQUENCE
	ncmE1PortLatchedStatusNIDIndex	INTEGER
	ncmE1PortLatchedStatusIndex	INTEGER
	ncmE1PortLatchedCRC4Error	INTEGER
	ncmE1PortLatchedFramingSlip	INTEGER
	ncmE1PortLatchedRAI	INTEGER
	ncmE1PortLatchedLOFA	INTEGER
	ncmE1PortLatchedAIS	INTEGER
	ncmE1PortLatchedLOS	INTEGER
	ncmE1PortLatchedBPVThresholdExceeded	INTEGER

NcmE1ThresholdStatusEntry
SEQUENCE
	ncmE1ThresholdStatusNIDIndex	INTEGER
	ncmE1ThresholdStatusIndex	INTEGER
	ncmE1CRCThreshold	INTEGER
	ncmE1CRCExceeded	INTEGER
	ncmE1SESThreshold	INTEGER
	ncmE1SESExceeded	INTEGER
	ncmE1UASThreshold	INTEGER
	ncmE1UASExceeded	INTEGER
	ncmE1BPVThresholdst	INTEGER
	ncmE1BPVExceeded	INTEGER
	ncmE1BERThreshold	INTEGER
	ncmE1BERExceeded	INTEGER
	ncmE1RestoreState	INTEGER
	ncmE1LineRestoreSec	INTEGER

NcmT1ConfigEntry
SEQUENCE
	ncmT1ConfigNIDIndex	INTEGER
	ncmT1LineIndex	INTEGER
	ncmT1CRC6	INTEGER
	ncmT1FramingFormat	INTEGER
	ncmT1LineCoding	INTEGER
	ncmT1FramingType	INTEGER
	ncmT1FDL	INTEGER
	ncmT1InbandISDNEnableDisable	INTEGER
	ncmT1EnableNetLoopback	INTEGER
	ncmT1EnableNetOnesDensity	INTEGER
	ncmT1DensityPattern	INTEGER
	ncmT1EnableRepeaterLpbkTimeout	INTEGER
	ncmT1RepeaterLoopbackTimeout	INTEGER
	ncmT1UserAlarmDeclareTime	INTEGER
	ncmT1State	INTEGER
	ncmT1NetworkLBOEQLIZ	INTEGER
	ncmT1TimeSlot	DisplayString
	ncmT1TimeSlotSelect	INTEGER

NcmT1PortStatusEntry
SEQUENCE
	ncmT1PortStatusNIDIndex	INTEGER
	ncmT1PortStatusIndex	INTEGER
	ncmT1PortCRC6Error	INTEGER
	ncmT1PortFramingSlip	INTEGER
	ncmT1PortRAI	INTEGER
	ncmT1PortLOF	INTEGER
	ncmT1PortAIS	INTEGER
	ncmT1PortLOS	INTEGER
	ncmT1PortBPVThresholdExceeded	INTEGER
	ncmT1BlockErrorCounter	Gauge
	ncmT1BERExceeded	INTEGER
	ncmT1PortSendRAI	INTEGER
	ncmT1PortSendAIS	INTEGER
	ncmT1PortCGA	INTEGER
	ncmT1PortLLB	INTEGER
	ncmT1PortPLB	INTEGER
	ncmT1PortLOC	INTEGER
	ncmT1PortTestPattern	INTEGER

NcmT1CurrentEntry
SEQUENCE
	ncmT1CurrentNIDIndex	INTEGER
	ncmT1CurrentIndex	INTEGER
	ncmT1CurrentEndType	INTEGER
	ncmT1Timestamp	INTEGER
	ncmT1Timestamp1	INTEGER
	ncmT1CurrentIntervalSec	INTEGER
	ncmT1CurrentASs	Gauge
	ncmT1CurrentUASs	Gauge
	ncmT1CurrentESs	Gauge
	ncmT1CurrentBESs	Gauge
	ncmT1CurrentSESs	Gauge
	ncmT1CurrentSEFs	Gauge
	ncmT1CurrentLOSs	Gauge
	ncmT1CurrentAISs	Gauge
	ncmT1CurrentLOFs	Gauge
	ncmT1CurrentOOFs	Gauge
	ncmT1CurrentESsTypeA	Gauge
	ncmT1CurrentSASs	Gauge
	ncmT1CurrentCSSs	Gauge
	ncmT1CurrentLOFC	Gauge
	ncmT1CurrentFrameErrCount	Gauge
	ncmT1CurrentErrorFreeSec	Gauge
	ncmT1CurrentDegradedMin	Gauge

NcmT1IntervalEntry
SEQUENCE
	ncmT1IntervalNIDIndex	INTEGER
	ncmT1IntervalIndex	INTEGER
	ncmT1IntervalEndType	INTEGER
	ncmT1IntervalNumber	INTEGER
	ncmT1IntervalASs	Gauge
	ncmT1IntervalUASs	Gauge
	ncmT1IntervalESs	Gauge
	ncmT1IntervalBESs	Gauge
	ncmT1IntervalSESs	Gauge
	ncmT1IntervalSEFs	Gauge
	ncmT1IntervalLOSs	Gauge
	ncmT1IntervalAISs	Gauge
	ncmT1IntervalLOFs	Gauge
	ncmT1IntervalOOFs	Gauge
	ncmT1IntervalESsTypeA	Gauge
	ncmT1IntervalSASs	Gauge
	ncmT1IntervalCSSs	Gauge
	ncmT1IntervalLOFC	Gauge
	ncmT1IntervalFrameErr	Gauge
	ncmT1IntervalErrFreeSec	Gauge
	ncmT1IntervalDegradMin	Gauge

NcmT1TotalEntry
SEQUENCE
	ncmT1TotalNIDIndex	INTEGER
	ncmT1TotalIndex	INTEGER
	ncmT1TotalEndType	INTEGER
	ncmT1NumberOfValidIntervals	INTEGER
	ncmT1TotalASs	Gauge
	ncmT1TotalUASs	Gauge
	ncmT1TotalESs	Gauge
	ncmT1TotalBESs	Gauge
	ncmT1TotalSESs	Gauge
	ncmT1TotalSEFs	Gauge
	ncmT1TotalLOSs	Gauge
	ncmT1TotalAISs	Gauge
	ncmT1TotalLOFs	Gauge
	ncmT1TotalOOFs	Gauge
	ncmT1TotalESsTypeA	Gauge
	ncmT1TotalSASs	Gauge
	ncmT1TotalCSSs	Gauge
	ncmT1TotalLOFC	Gauge
	ncmT1TotalFrameErrCount	Gauge
	ncmT1TotalErrorFreeSec	Gauge
	ncmT1TotalDegradedMin	Gauge

NcmT1PrevTotalEntry
SEQUENCE
	ncmT1PrevTotalNIDIndex	INTEGER
	ncmT1PrevTotalIndex	INTEGER
	ncmT1PrevTotalEndType	INTEGER
	ncmT1PrevTotalASs	Gauge
	ncmT1PrevTotalUASs	Gauge
	ncmT1PrevTotalESs	Gauge
	ncmT1PrevTotalBESs	Gauge
	ncmT1PrevTotalSESs	Gauge
	ncmT1PrevTotalSEFs	Gauge
	ncmT1PrevTotalLOSs	Gauge
	ncmT1PrevTotalAISs	Gauge
	ncmT1PrevTotalLOFs	Gauge
	ncmT1PrevTotalOOFs	Gauge
	ncmT1PrevTotalESsTypeA	Gauge
	ncmT1PrevTotalSASs	Gauge
	ncmT1PrevTotalCSSs	Gauge
	ncmT1PrevTotalLOFC	Gauge
	ncmT1PrevTotalFrameErrCount	Gauge
	ncmT1PrevTotalErrorFreeSec	Gauge
	ncmT1PrevTotalDegradedMin	Gauge

NcmT1PreformanceSnapShotEntry
SEQUENCE
	ncmT1SnapShotNIDIndex	INTEGER
	ncmT1SnapShotIndex	INTEGER
	ncmT1SnapShotEndType	INTEGER
	ncmT1SnapShot	INTEGER
	ncmT1TimeStampSec	INTEGER
	ncmT1TimeStampMilliSec	INTEGER
	ncmT1CurrIntervalSec	INTEGER
	ncmT1ResetPerfReg	INTEGER

NcmAdvancedT1ConfigEntry
SEQUENCE
	ncmAdvancedT1NIDIndex	INTEGER
	ncmAdvancedT1LineIndex	INTEGER
	ncmadvfdlMode	INTEGER
	ncmadvfdlStandard	INTEGER
	ncmadvfdlPerformanceReport	INTEGER
	ncmadvfdlLBEnable	INTEGER
	ncmadvfdlLLBT1BOPMsg	INTEGER
	ncmadvfdlPLBT1BOPMsg	INTEGER
	ncmadvfdlIdlePattern	INTEGER
	ncmadvfdlMonitoringCsuType	INTEGER

NcmT1LatchedStatusEntry
SEQUENCE
	ncmT1LatchedStatusNIDIndex	INTEGER
	ncmT1LatchedStatusIndex	INTEGER
	ncmT1LatchedStatusEndType	INTEGER
	ncmT1LatchedStatusCRC6Error	INTEGER
	ncmT1LatchedStatusFramingSlip	INTEGER
	ncmT1LatchedStatusRAI	INTEGER
	ncmT1LatchedStatusLOF	INTEGER
	ncmT1LatchedStatusAIS	INTEGER
	ncmT1LatchedStatusLOS	INTEGER
	ncmT1LatchedStatusBPVThreExcd	Gauge
	ncmT1LatchedStatusBERExceeded	Gauge

NcmT1ThresholdStatusEntry
SEQUENCE
	ncmT1ThresholdStatusNIDIndex	INTEGER
	ncmT1ThresholdStatusIndex	INTEGER
	ncmT1ThresholdStatusEndType	INTEGER
	ncmT1ThresholdRestoreState	INTEGER
	ncmT1ThresholdSecLineRestore	Gauge
	ncmT1ThresholdBERExceeded	INTEGER
	ncmT1ThresholdBERCount	Gauge
	ncmT1ThresholdSESExceeded	INTEGER
	ncmT1ThresholdSESCount	Gauge
	ncmT1ThresholdUASExceeded	INTEGER
	ncmT1ThresholdUASCount	Gauge
	ncmT1ThresholdCRCExceeded	INTEGER
	ncmT1ThresholdCRCCount	Gauge
	ncmT1ThresholdBPVExceeded	INTEGER
	ncmT1ThresholdBPVCount	Gauge

NcmT1PerformanceCountersEntry
SEQUENCE
	ncmT1PerfCountNIDIndex	INTEGER
	ncmT1PerfCountIndex	INTEGER
	ncmT1PerfCountEndType	INTEGER
	ncmT1PerfCountFrameMode	INTEGER
	ncmT1PerfCountCurESFErrEvt	Gauge
	ncmT1PerfCountCurBPVErrCnt	Gauge
	ncmT1PerfCountCurFrameErrCnt	Gauge
	ncmT1PerfCountCurCRC6Error	Gauge
	ncmT1ResetPerfCount	INTEGER

NcmDataPortConfigEntry
SEQUENCE
	ncmDataPortConfigNIDIndex	INTEGER
	ncmDataPortConfigIndex	INTEGER
	ncmDataPortConfigMode	INTEGER
	ncmDataPortConfigLineIndicate	INTEGER
	ncmDataPortLineStatusCDCC	INTEGER
	ncmDataPortLineStatusCACB	INTEGER
	ncmDataPortLineStatusLLCJ	INTEGER
	ncmDataPortLineStatusRLTM	INTEGER
	ncmDataPortConfigLOS	INTEGER
	ncmDataPortConfigServiceState	INTEGER
	ncmDataPortConfigClkOpt	INTEGER

NcmDataPortStatusEntry
SEQUENCE
	ncmDataPortStatusNIDIndex	INTEGER
	ncmDataPortStatusIndex	INTEGER
	ncmDataPortStatusMode	INTEGER
	ncmDataPortStatusLineIndicate	INTEGER
	ncmDataPortStatusLineCDCC	INTEGER
	ncmDataPortStatusLineCACB	INTEGER
	ncmDataPortStatusLineLLCJ	INTEGER
	ncmDataPortStatusLineRLTM	INTEGER
	ncmDataPortStatusLineLOS	INTEGER
	ncmDataPortStatusServiceState	INTEGER
	ncmDataPortStatusCimType	INTEGER
	ncmDataPortStatusLoopback	INTEGER
	ncmDataPortTestPattern	INTEGER
	ncmDataPortTstPatErrCount	Gauge

NcmALARMConfigEntry
SEQUENCE
	ncmAlarmConfigNIDIndex	INTEGER
	ncmAlarmConfigIndex	INTEGER
	ncmAlmCfgDomain	INTEGER
	ncmAlmCfgSrcAddr	DisplayString
	ncmAlmCfgCard	INTEGER
	ncmAlmCfgShelf	INTEGER
	ncmAlmCfgE1T1Port1EnableAlmRpt	INTEGER
	ncmAlmCfgE1T1Port2EnableAlmRpt	INTEGER
	ncmAlmCfgE1T1Port3EnableAlmRpt	INTEGER
	ncmAlmCfgE1T1Port4EnableAlmRpt	INTEGER
	ncmAlmCfgDataPort1EnableAlmRpt	INTEGER
	ncmAlmCfgDataPort2EnableAlmRpt	INTEGER
	ncmAlmCfgEnableCardAlmRpt	INTEGER
	ncmAlmCfgDeclareTime	INTEGER

NcmCURRENTAlarmMsgEntry
SEQUENCE
	ncmCurrAlarmMsgNIDIndex	INTEGER
	ncmCurrAlarmMsgIndex	INTEGER
	ncmCurrAlarmMsgNumber	INTEGER
	ncmCurrAlarmMsgEquipID	INTEGER

NcmPrevAlarmMsgEntry
SEQUENCE
	ncmPrevAlarmMsgNIDIndex	INTEGER
	ncmPrevAlarmMsgIndex	INTEGER
	ncmPrevAlarmMsgNumber	INTEGER
	ncmPrevAlarmMsgTimeStampSec	INTEGER
	ncmPrevAlarmMsgTimeStampms	INTEGER
	ncmPrevAlarmMsgAlarmCode	INTEGER
	ncmPrevAlarmMsgAlarmInstance	INTEGER
	ncmPrevAlarmMsgObjType	INTEGER
	ncmPrevAlarmMsgSeverity	INTEGER

NcmEnhanAlmCfgEntry
SEQUENCE
	ncmEnhanAlmCfgNIDIndex	INTEGER
	ncmEnhanAlmCfgIndex	INTEGER
	ncmEnhanAlmCfgCRCThreshold	INTEGER
	ncmEnhanAlmCfgSESThreshold	INTEGER
	ncmEnhanAlmCfgUASThreshold	INTEGER
	ncmEnhanAlmCfgBERThreshold	INTEGER
	ncmEnhanAlmCfgBPVThreshold	INTEGER
	ncmEnhanAlmCfgLineRestoral	INTEGER
	ncmEnhanAlmCfgTODHour	INTEGER
	ncmEnhanAlmCfgTODMinute	INTEGER
	ncmEnhanAlmCfgLinRestEvalPer	INTEGER

NcmLoopbackEntry
SEQUENCE
	ncmLpbkNIDIndex	INTEGER
	ncmLpbkLineIndex	INTEGER
	ncmSetAllOnes	INTEGER
	ncmTimeoutLOCSec	INTEGER
	ncmRemoteLB	INTEGER
	ncmActivateDeactLBType	INTEGER

NcmTestPatternEntry
SEQUENCE
	ncmTstpattNIDIndex	INTEGER
	ncmTstpattLineIndex	INTEGER
	ncmTstpattTestPeriod	INTEGER
	ncmStartStopTestPattern	INTEGER
	ncmResetTestCounter	INTEGER

NcmCircuitInfoEntry
SEQUENCE
	ncmCircuitInfoNIDIndex	INTEGER
	ncmCircuitInfoCircName	DisplayString
	ncmCircuitInfoCircPriority	INTEGER
	ncmCircuitInfoCircType	INTEGER
	ncmCircuitInfoCircMode	INTEGER
	ncmCircuitInfoSrcPortSite	INTEGER
	ncmCircuitInfoSrcCardEquipID	INTEGER
	ncmCircuitInfoSrcPortID	INTEGER
	ncmCircuitInfoSrcTimeslotmap	INTEGER
	ncmCircuitInfoDstPortSite	INTEGER
	ncmCircuitInfoDstCardEquipID	INTEGER
	ncmCircuitInfoDstPortID	INTEGER
	ncmCircuitInfoDstTimeslotmap	INTEGER
	ncmCircuitInfoBackPlaneBusID	INTEGER
	ncmCircuitInfoAssoCircName	DisplayString
	ncmCircuitInfoAction	INTEGER
	ncmAddEditActDeactCircuitStatus	INTEGER
	ncmDeleteCircuitStatus	INTEGER
	ncmGetDetailCircuitStatus	INTEGER

NcmPortTimeslotAllocEntry
SEQUENCE
	ncmPortTimeslotAllocNIDIndex	INTEGER
	ncmPortTimeslotCardSite	INTEGER
	ncmPortTimeslotCardEquipID	INTEGER
	ncmPortTimeslotPortID	INTEGER
	ncmPortAllocTimeSlotMap	INTEGER

NcmDialBkUpInfoEntry
SEQUENCE
	ncmDialBkUpInfoNIDIndex	INTEGER
	ncmDialBkUpReqCircName	DisplayString
	ncmPrimaryCircName	DisplayString
	ncmBackupCircName	DisplayString
	ncmCallReferenceNumber	INTEGER
	ncmCirSrcPortErrsetupMask	INTEGER
	ncmCirDstPortErrsetupMask	INTEGER
	ncmCirErrClearanceMask	INTEGER
	ncmDialBkUpTimeout	INTEGER
	ncmDialBkUpAction	INTEGER
	ncmDialBkUpSetupStatus	INTEGER

NcmClearCircuitGrpEntry
SEQUENCE
	ncmClearCircuitGrpNIDIndex	INTEGER
	ncmClearCircuitGrpName	INTEGER
	ncmClearCircuitGrpSite	INTEGER
	ncmClearCircuitCardEquipID	INTEGER
	ncmClearCircuitPortID	INTEGER
	ncmClearCircuitAction	INTEGER

NcmListGetMsgNumEntry
SEQUENCE
	ncmListMsgNumNIDIndex	INTEGER
	ncmListMsgNumCircuitGroup	INTEGER
	ncmListMsgNumPageNumber	INTEGER
	ncmListMsgNumCardSite	INTEGER
	ncmListMsgNumCardEquipID	INTEGER
	ncmListMsgNumPortID	INTEGER
	ncmNumofGetListMessage	INTEGER
	ncmTotalCircDatabase	INTEGER

NcmCircListccbEntry
SEQUENCE
	ncmListccbNIDIndex	INTEGER
	ncmNumofCircListMessage	INTEGER
	ncmListccbCircName	DisplayString
	ncmListccbCircPriority	INTEGER
	ncmListccbCircType	INTEGER
	ncmListccbCircMode	INTEGER
	ncmSrcPortSite	INTEGER
	ncmSrcCardEquipID	INTEGER
	ncmSrcPortIdentifier	INTEGER
	ncmSrcTimeslotmap	INTEGER
	ncmDstPortSite	INTEGER
	ncmDstCardEquipID	INTEGER
	ncmDstPortIdentifier	INTEGER
	ncmDstTimeslotmap	INTEGER
	ncmListccbBackPlaneBusID	INTEGER
	ncmListccbCircStatus	INTEGER

NcmEquipmentIDEntry
SEQUENCE
	ncmEquipmentIDNIDIndex	INTEGER
	ncmEquipmentIDLineIndex	INTEGER
	ncmFirmwareVersion	INTEGER
	ncmFirmwareRevision	INTEGER
	ncmEquipmentType	INTEGER
	ncmHardwareVersion	INTEGER
	ncmHardwareRevision	INTEGER
	ncmLocationID	INTEGER

NcmE1AlarmThresholdConfigEntry
SEQUENCE
	ncmE1AlarmThresholdConfigNIDIndex	INTEGER
	ncmE1AlarmThresholdConfigIndex	INTEGER
	ncmE1LOFThreshold	INTEGER
	ncmE1LOFTimeInterval	INTEGER
	ncmE1LOSThreshold	INTEGER
	ncmE1LOSTimeInterval	INTEGER
	ncmE1RAIThreshold	INTEGER
	ncmE1RAITimeInterval	INTEGER
	ncmE1AISThreshold	INTEGER
	ncmE1AISTimeInterval	INTEGER
	ncmE1BPVThreshold	INTEGER
	ncmE1BPVTimeInterval	INTEGER
	ncmE1ES15MINThreshold	INTEGER
	ncmE1ES24HRThreshold	INTEGER
	ncmE1SES15MINThreshold	INTEGER
	ncmE1SES24HRThreshold	INTEGER
	ncmCVP15MINThreshold	INTEGER
	ncmCVP24HRThreshold	INTEGER
	ncmCVL15MINThreshold	INTEGER
	ncmCVL24HRThreshold	INTEGER
	ncmESL15MINThreshold	INTEGER
	ncmESL24HRThreshold	INTEGER
	ncmSESL15MINThreshold	INTEGER
	ncmSESL24HRThreshold	INTEGER
	ncmUASP15MINThreshold	INTEGER
	ncmUASP24HRThreshold	INTEGER

NcmE1AlarmThresholdStatusEntry
SEQUENCE
	ncmE1AlarmThresholdStatusNIDIndex	INTEGER
	ncmE1AlarmThresholdStatusIndex	INTEGER
	ncmLOFExceededE1	INTEGER
	ncmLOSExceededE1	INTEGER
	ncmRAIExceededE1	INTEGER
	ncmAISExceededE1	INTEGER
	ncmBPVExceededE1	INTEGER
	ncmES15MINExceeded	INTEGER
	ncmES24HRExceeded	INTEGER
	ncmSES15MINExceeded	INTEGER
	ncmSES24HRExceeded	INTEGER
	ncmCVP15MINExceeded	INTEGER
	ncmCVP24HRExceeded	INTEGER
	ncmCVL15MINExceeded	INTEGER
	ncmCVL24HRExceeded	INTEGER
	ncmESL15MINExceeded	INTEGER
	ncmESL24HRExceeded	INTEGER
	ncmSESL15MINExceeded	INTEGER
	ncmSESL24HRExceeded	INTEGER
	ncmUASP15MINExceeded	INTEGER
	ncmUASP24HRExceeded	INTEGER
	ncmLOFThresholdCount	INTEGER
	ncmLOFTimeIntervals	INTEGER
	ncmLOSThresholdCount	INTEGER
	ncmLOSTimeIntervals	INTEGER
	ncmRAIThresholdCount	INTEGER
	ncmRAITimeIntervals	INTEGER
	ncmAISThresholdCount	INTEGER
	ncmAISTimeIntervals	INTEGER
	ncmBPVThresholdCount	INTEGER
	ncmBPVTimeIntervals	INTEGER
	ncmES15MINThresholdCount	INTEGER
	ncmES24HRThresholdCount	INTEGER
	ncmSES15MINThresholdCount	INTEGER
	ncmSES24HRThresholdCount	INTEGER
	ncmCVP15MINThresholdCount	INTEGER
	ncmCVP24HRThresholdCount	INTEGER
	ncmCVL15MINThresholdCount	INTEGER
	ncmCVL24HRThresholdCount	INTEGER
	ncmESL15MINThresholdCount	INTEGER
	ncmESL24HRThresholdCount	INTEGER
	ncmSESL15MINThresholdCount	INTEGER
	ncmSESL24HRThresholdCount	INTEGER
	ncmUASP15MINThresholdCount	INTEGER
	ncmUASP24HRThresholdCount	INTEGER

NcmAlarmThresholdConfigEntry
SEQUENCE
	ncmAlarmThresholdConfigNIDIndex	INTEGER
	ncmAlarmThresholdConfigIndex	INTEGER
	ncmLOFThreshold	INTEGER
	ncmLOFTimeInterval	INTEGER
	ncmLOSThreshold	INTEGER
	ncmLOSTimeInterval	INTEGER
	ncmRAIThreshold	INTEGER
	ncmRAITimeInterval	INTEGER
	ncmAISThreshold	INTEGER
	ncmAISTimeInterval	INTEGER
	ncmBPVThreshold	INTEGER
	ncmBPVTimeInterval	INTEGER
	ncmES15MINThreshold	INTEGER
	ncmES24HRThreshold	INTEGER
	ncmSES15MINThreshold	INTEGER
	ncmSES24HRThreshold	INTEGER

NcmAlarmThresholdStatusEntry
SEQUENCE
	ncmAlarmThresholdStatusNIDIndex	INTEGER
	ncmAlarmThresholdStatusIndex	INTEGER
	ncmLOFExceeded	INTEGER
	ncmLOSExceeded	INTEGER
	ncmAISExceeded	INTEGER
	ncmRAIExceeded	INTEGER
	ncmBPVExceeded	INTEGER
	ncmESExceeded	INTEGER
	ncmSESExceeded	INTEGER
	ncmLOFThresholdCountst	INTEGER
	ncmLOFTimeIntervalst	INTEGER
	ncmLOSThresholdCountst	INTEGER
	ncmLOSTimeIntervalst	INTEGER
	ncmRAIThresholdCountst	INTEGER
	ncmRAITimeIntervalst	INTEGER
	ncmAISThresholdCountst	INTEGER
	ncmAISTimeIntervalst	INTEGER
	ncmBPVThresholdCountst	INTEGER
	ncmBPVTimeIntervalst	INTEGER
	ncmES15MINThresholdCountst	INTEGER
	ncmES24HRThresholdCountst	INTEGER
	ncmSES15MINThresholdCountst	INTEGER
	ncmSES24HRThresholdCountst	INTEGER
	ncmResetAlmThresholdCount	INTEGER

NcmShelfSyncSourceSegEntry
SEQUENCE
	ncmShelfSyncSegNIDIndex	INTEGER
	ncmShelfSyncSourceSegIndex	INTEGER
	ncmShelfSyncSourceSegNum	INTEGER
	ncmShelfTypeSeg	INTEGER
	ncmRefBusSeg	INTEGER
	ncmSourceSegOneShelfNum	INTEGER
	ncmSourceSegOneCardNum	INTEGER
	ncmSourceSegOneClockRef	INTEGER
	ncmSourceSegAutoRestore1	INTEGER
	ncmSourceSegTwoShelfNum	INTEGER
	ncmSourceSegTwoCardNum	INTEGER
	ncmSourceSegTwoClockRef	INTEGER
	ncmSourceSegAutoRestore2	INTEGER
	ncmSourceSegThreeShelfNum	INTEGER
	ncmSourceSegThreeCardNum	INTEGER
	ncmSourceSegThreeClockRef	INTEGER
	ncmSourceSegAutoRestore3	INTEGER
	ncmShelfCurrentSyncSourceSeg	INTEGER

Defined Values

ncmNodeCurrTable		1.3.6.1.4.1.321.1.3012.1001
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmNodeCurrEntry

ncmNodeCurrEntry		1.3.6.1.4.1.321.1.3012.1001.1
An entry in the ncmNode Current table for selecting the active node in operation.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmNodeCurrEntry

ncmNodeCurrIndex		1.3.6.1.4.1.321.1.3012.1001.1.1
This variable indicates the node id value inside the array containing all called nodes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmNodeCurrAddress		1.3.6.1.4.1.321.1.3012.1001.1.2
This variable indicates the ncmNode Current Address.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

ncmActiveNodeStatus		1.3.6.1.4.1.321.1.3012.1001.1.3
This variable indicates what is the current node of the network that is being managed; when this object is set, another node table will be activated and treat as active.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	inactive(1), active(2)

ncmNodeInfoTable		1.3.6.1.4.1.321.1.3012.1002
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmNodeInfoEntry

ncmNodeInfoEntry		1.3.6.1.4.1.321.1.3012.1002.1
An entry in the ncmNode Info table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmNodeInfoEntry

ncmNodeIndex		1.3.6.1.4.1.321.1.3012.1002.1.1
This variable indicates the node id value of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmNodeAddress		1.3.6.1.4.1.321.1.3012.1002.1.2
This variable indicates the ncmNode Address.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

ncmTime		1.3.6.1.4.1.321.1.3012.1002.1.3
The time (in the hh:mm:sec) format for the card.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

ncmDate		1.3.6.1.4.1.321.1.3012.1002.1.4
The date (in mm:dd:yy) format for the card.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..255)

ncmNodeShelf		1.3.6.1.4.1.321.1.3012.1002.1.5
The variable indicates the bit mapping of shelf number associated with the node the bit 1 if equipped and 0 if not equipped. i.e. ncmShelf 0 = bit 0
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmNodeID		1.3.6.1.4.1.321.1.3012.1002.1.6
The variable indicates the node id that uniquely identifies a node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmControllerEqID		1.3.6.1.4.1.321.1.3012.1002.1.7
The variable indicates the Equipment Id of the Controller.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmShelfInfoTable		1.3.6.1.4.1.321.1.3012.1003
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmShelfInfoEntry

ncmShelfInfoEntry		1.3.6.1.4.1.321.1.3012.1003.1
An entry in the ncmShelf Info table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmShelfInfoEntry

ncmShelfNIDIndex		1.3.6.1.4.1.321.1.3012.1003.1.1
This variable indicates the node id value of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmShelfIndex		1.3.6.1.4.1.321.1.3012.1003.1.2
This object is the identifier of an Interface on a managed device. If there is an ifEntry that is directly associated with this and only this DS1 interface, it should have the same value as ifIndex. Otherwise, the value exceeds ifNumber, and is a unique identifier following this rule: inside interfaces (e.g., equipment side) with even numbers and outside interfaces (e.g., network side) with odd numbers.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmShelfNumber		1.3.6.1.4.1.321.1.3012.1003.1.3
This variable indicates the number of the shelf.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmShelfHardware		1.3.6.1.4.1.321.1.3012.1003.1.4
This variable indicates the shelf hardware type.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	uninstalled(1), duallineshelf(2), multilineshelf(3), nb-2200lineshelf(4), nb-2200-4ilineshelf(10), nb-2200qlineshelf(52), nb-2200-4iqlineshelf(54)

ncmNumberofCards		1.3.6.1.4.1.321.1.3012.1003.1.5
This variable indicates the total number of cards in the shelf.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmListCardsInShelf		1.3.6.1.4.1.321.1.3012.1003.1.6
This variable indicates the cards present in the shelf. For Example 1,3,5 if the cards 1,3 and 5 are present.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

ncmCardInfoTable		1.3.6.1.4.1.321.1.3012.1004
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmCardInfoEntry

ncmCardInfoEntry		1.3.6.1.4.1.321.1.3012.1004.1
An entry in the ncmCard Info table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmCardInfoEntry

ncmCardNIDIndex		1.3.6.1.4.1.321.1.3012.1004.1.1
This variable indicates the node id value of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmCardIndex		1.3.6.1.4.1.321.1.3012.1004.1.2
This object is the identifier of an Interface on a managed device. If there is an ifEntry that is directly associated with this and only this DS1 interface, it should have the same value as ifIndex. Otherwise, the value exceeds ifNumber, and is a unique identifier following this rule: inside interfaces (e.g., equipment side) with even numbers and outside interfaces (e.g., network side) with odd numbers.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmFirmwareType		1.3.6.1.4.1.321.1.3012.1004.1.3
This variable indicates the firmware type for cards.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	card-sigma-sam(48), card-sigma-sam-1(64), card-sigma-csu(49), card-sigma-dsu(50), card-sigma-ddsu(51), card-sigma-tu(52), card-sigma-smds(53), card-sigma-idc-sam(54), card-sigma-idc(55), card-ct1-sam(56), card-ct1-csu(57), card-ct1-dsu(58), card-ct1-tu(60), card-sigma-dsu-dds(61), card-sigma-dsu-dsu(62), card-sigma-aps(63), card-sigma-vcu(77), e1-ace-firmware(80), t1-ace-firmware(81), quad-T1-ace-firmware(82), quad-E1-ace-firmware(83), imux-tabs-firmware(85), ace-dual-t1-firmware(86), ace-dual-e1-firmware(87), ds3-cdsu-firmware(88), ncm-t1-firmware(96), card-sigma-diu-2144(97), card-sigma-dsu-2131(98), ace-fw-isdn-T1(112), ace-fw-isdn-E1(113), quad-fw-isdn-T1(114), quad-fw-isdn-E1(115), dual-port-ds3(116), m13-2113-firmware(117), imux-2164-firmware(119)

ncmCimType		1.3.6.1.4.1.321.1.3012.1004.1.4
This variable indicates the cim type for the cards.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	cim-2001-e1(16), cim-2002-e1(17), cim-2003-e1(18), cim-2004-e1(19), cim-2005-e1(20), cim-2006-e1(21), cim-nim-2000(22), cim-2101-t1(32), cim-2102-t1(33), cim-2164(34), cim-2168(35), cim-2162(36), cim-2061(56), cim-2065(37), cim-hssi(48), cim-v35(49), cim-eia530A(50), cim-eia530(51), cim-rs449(52), cim-hsm-2113(62), cim-vcu-4W(64), cim-vcu-2W(65), cim-dim-2435(82), cim-dim-2530(83), cim-dim-2035(88), cim-dim-2449(89), cim-dim-2232(90), cim-uninstall(255)

ncmClearCardInfo		1.3.6.1.4.1.321.1.3012.1004.1.5
This variable indicates the option to clear the ncmCard Configuration in EEProm.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmShelfSyncSourceTable		1.3.6.1.4.1.321.1.3012.1005
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmShelfSyncSourceEntry

ncmShelfSyncSourceEntry		1.3.6.1.4.1.321.1.3012.1005.1
An entry in the ncm Shelf Sync Source Time table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmShelfSyncSourceEntry

ncmShelfSyncNIDIndex		1.3.6.1.4.1.321.1.3012.1005.1.1
This variable indicates the node id value of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmShelfSyncSourceIndex		1.3.6.1.4.1.321.1.3012.1005.1.2
This object is the identifier of an Interface on a managed device. If there is an ifEntry that is directly associated with this and only this DS1 interface, it should have the same value as ifIndex. Otherwise, the value exceeds ifNumber, and is a unique identifier following this rule: inside interfaces (e.g., equipment side) with even numbers and outside interfaces (e.g., network side) with odd numbers.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmSourceOneShelfNum		1.3.6.1.4.1.321.1.3012.1005.1.3
This variable indicates the source one shelf number.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmSourceOneCardNum		1.3.6.1.4.1.321.1.3012.1005.1.4
This variable indicates the source one card number.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmSourceOneClockRef		1.3.6.1.4.1.321.1.3012.1005.1.5
This variable indicates the source one clock reference.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	e1-t1port1(5), e1-t1port2(6), external-timing(7), internal-timing(8), ncmdata-port1(9), ncmdata-port2(10), quad-t1-port3(11), quad-t1-port4(12)

ncmAutoRestore1		1.3.6.1.4.1.321.1.3012.1005.1.6
This variable indicates the source one auto restore.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

ncmSourceTwoShelfNum		1.3.6.1.4.1.321.1.3012.1005.1.7
This variable indicates the source two shelf number.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmSourceTwoCardNum		1.3.6.1.4.1.321.1.3012.1005.1.8
This variable indicates the source two card number.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmSourceTwoClockRef		1.3.6.1.4.1.321.1.3012.1005.1.9
This variable indicates the source two clock reference.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	e1-t1port1(5), e1-t1port2(6), external-timing(7), internal-timing(8), ncmdata-port1(9), ncmdata-port2(10), quad-t1-port3(11), quad-t1-port4(12)

ncmAutoRestore2		1.3.6.1.4.1.321.1.3012.1005.1.10
This variable indicates the source two auto restore.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

ncmSourceThreeShelfNum		1.3.6.1.4.1.321.1.3012.1005.1.11
This variable indicates the source three shelf number.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmSourceThreeCardNum		1.3.6.1.4.1.321.1.3012.1005.1.12
This variable indicates the source three card number.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmSourceThreeClockRef		1.3.6.1.4.1.321.1.3012.1005.1.13
This variable indicates the source three clock reference.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	e1-t1port1(5), e1-t1port2(6), external-timing(7), internal-timing(8), ncmdata-port1(9), ncmdata-port2(10), quad-t1-port3(11), quad-t1-port4(12)

ncmAutoRestore3		1.3.6.1.4.1.321.1.3012.1005.1.14
This variable indicates the source three auto restore.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

ncmShelfCurrentSyncSource		1.3.6.1.4.1.321.1.3012.1005.1.15
This variable indicates the current sync source.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	source1(1), source2(2), source3(3)

ncmCardSyncSourceTable		1.3.6.1.4.1.321.1.3012.1006
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmCardSyncSourceEntry

ncmCardSyncSourceEntry		1.3.6.1.4.1.321.1.3012.1006.1
An entry in the ncmCard Sync ncmSource Time table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmCardSyncSourceEntry

ncmCardSyncNIDIndex		1.3.6.1.4.1.321.1.3012.1006.1.1
This variable indicates the node id value of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmCardSyncSourceIndex		1.3.6.1.4.1.321.1.3012.1006.1.2
This object is the identifier of an Interface on a managed device. If there is an ifEntry that is directly associated with this and only this DS1 interface, it should have the same value as ifIndex. Otherwise, the value exceeds ifNumber, and is a unique identifier following this rule: inside interfaces (e.g., equipment side) with even numbers and outside interfaces (e.g., network side) with odd numbers.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmCardReceiveClockFromShelf		1.3.6.1.4.1.321.1.3012.1006.1.3
This variable indicates receive sync clock from the shelf for the card .
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmCardSourceOneShelfNum		1.3.6.1.4.1.321.1.3012.1006.1.4
This variable indicates the source one shelf number.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmCardSourceOneCardNum		1.3.6.1.4.1.321.1.3012.1006.1.5
This variable indicates the source one card number.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmCardSourceOneClockRef		1.3.6.1.4.1.321.1.3012.1006.1.6
This variable indicates the source one clock reference.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	e1-t1port1(5), e1-t1port2(6), external-timing(7), internal-timing(8), data-port1(9), data-port2(10), quad-t1-port3(11), quad-t1-port4(12)

ncmCardAutoRestore1		1.3.6.1.4.1.321.1.3012.1006.1.7
This variable indicates the source one auto restore.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

ncmCardSourceTwoShelfNum		1.3.6.1.4.1.321.1.3012.1006.1.8
This variable indicates the source two shelf number.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmCardSourceTwoCardNum		1.3.6.1.4.1.321.1.3012.1006.1.9
This variable indicates the source two card number.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmCardSourceTwoClockRef		1.3.6.1.4.1.321.1.3012.1006.1.10
This variable indicates the source two clock reference.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	e1-t1port1(5), e1-t1port2(6), external-timing(7), internal-timing(8), data-port1(9), data-port2(10), quad-t1-port3(11), quad-t1-port4(12)

ncmCardAutoRestore2		1.3.6.1.4.1.321.1.3012.1006.1.11
This variable indicates the source two auto restore.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

ncmCardSourceThreeShelfNum		1.3.6.1.4.1.321.1.3012.1006.1.12
This variable indicates the source three shelf number.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmCardSourceThreeCardNum		1.3.6.1.4.1.321.1.3012.1006.1.13
This variable indicates the source three card number.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmCardSourceThreeClockRef		1.3.6.1.4.1.321.1.3012.1006.1.14
This variable indicates the source three clock reference.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	e1-t1port1(5), e1-t1port2(6), external-timing(7), internal-timing(8), data-port1(9), data-port2(10), quad-t1-port3(11), quad-t1-port4(12)

ncmCardAutoRestore3		1.3.6.1.4.1.321.1.3012.1006.1.15
This variable indicates the source three auto restore.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

ncmCardCurrentSyncSource		1.3.6.1.4.1.321.1.3012.1006.1.16
This variable indicates the current sync ncm source.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	source1(1), source2(2), source3(3)

ncmIDPromTable		1.3.6.1.4.1.321.1.3012.1007
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmIDPromEntry

ncmIDPromEntry		1.3.6.1.4.1.321.1.3012.1007.1
An entry in the ncm ID Prom Table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmIDPromEntry

ncmIDPromNIDIndex		1.3.6.1.4.1.321.1.3012.1007.1.1
This variable indicates the node id value of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmIDPromIndex		1.3.6.1.4.1.321.1.3012.1007.1.2
This object is the identifier of an Interface on a managed device. If there is an ifEntry that is directly associated with this and only this DS1 interface, it should have the same value as ifIndex. Otherwise, the value exceeds ifNumber, and is a unique identifier following this rule: inside interfaces (e.g., equipment side) with even numbers and outside interfaces (e.g., network side) with odd numbers.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmCardType		1.3.6.1.4.1.321.1.3012.1007.1.3
This variable indicates the ncmCard type of the card.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ace-card(1), quad-card-for-imux(2), dual-csu(3)

ncmCardRevision		1.3.6.1.4.1.321.1.3012.1007.1.4
This variable indicates the revision number for the card.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

ncmCardDate		1.3.6.1.4.1.321.1.3012.1007.1.5
This variable indicates the date (mm-dd-yy) for the card.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

ncmCardSerialNumber		1.3.6.1.4.1.321.1.3012.1007.1.6
This variable indicates the Serial Number for the card.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

ncmManufacturePartNumber		1.3.6.1.4.1.321.1.3012.1007.1.7
This variable indicates the Manufacture Part Number for the card.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

ncmVendorCageCode		1.3.6.1.4.1.321.1.3012.1007.1.8
This variable indicates the Vendor Cage Code for the card.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

ncmIDCimType		1.3.6.1.4.1.321.1.3012.1007.1.9
This variable indicates the cim Type for the card.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	cIM29004(16), cIM29005(17), cIM29006(18), cIM29007(19), cIM29008(20), cIM29009(21), cIM29010(32), cIM29011(33), cIM-2164(34), cIM-2168(35), cIM29003(36), cIM29002(56), cIM29001(37), nIM2000(22), cIM-UNINSTALLED(255)

ncmCimRevision		1.3.6.1.4.1.321.1.3012.1007.1.10
This variable indicates the revision number for the cim of the card.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

ncmCimDate		1.3.6.1.4.1.321.1.3012.1007.1.11
This variable indicates the date (mm-dd-yy) of the cim for the card.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

ncmCimSerialNumber		1.3.6.1.4.1.321.1.3012.1007.1.12
This variable indicates the Serial Number for the card.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

ncmCimManufacturePartNumber		1.3.6.1.4.1.321.1.3012.1007.1.13
This variable indicates the Manufacture Part Number for the card.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

ncmCimVendorCageCode		1.3.6.1.4.1.321.1.3012.1007.1.14
This variable indicates the Vendor Cage Code for the card.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

ncmE1PortConfigTable		1.3.6.1.4.1.321.1.3012.1008
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmE1PortConfigEntry

ncmE1PortConfigEntry		1.3.6.1.4.1.321.1.3012.1008.1
An entry in the E1 Port Configuration table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmE1PortConfigEntry

ncmE1ConfigNIDIndex		1.3.6.1.4.1.321.1.3012.1008.1.1
This object is the identifier of the node id index.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmE1PortLineIndex		1.3.6.1.4.1.321.1.3012.1008.1.2
The index value which uniquely identifies the interface to which this entry is applicable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmE1PortCRC4		1.3.6.1.4.1.321.1.3012.1008.1.3
This variable indicates whether the CRC4 for the port is Enabled or Disabled.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

ncmE1PortCarrierFailureAlarm		1.3.6.1.4.1.321.1.3012.1008.1.4
This variable indicates whether the Carrier Failure ncmAlarm is Enabled or Disabled.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

ncmE1PortFaseAlarm		1.3.6.1.4.1.321.1.3012.1008.1.5
This variable indicates whether the Fase ncmAlarm is Major or Minor Category.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	minor(1), major(2)

ncmE1PortInbandISDNEnableDisable		1.3.6.1.4.1.321.1.3012.1008.1.6
This variable indicates the Inband, ISDN enable and disable options.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disablebothinbandisdn(1), enableinband(2), enableisdn(3)

ncmE1PortRepeaterLoopbackTimeoutEnable		1.3.6.1.4.1.321.1.3012.1008.1.7
This variable indicates the option to enable the repeater loopback timeout.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

ncmE1PortFraming		1.3.6.1.4.1.321.1.3012.1008.1.8
This variable indicates the framing for E1 Port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	cAS(1), cCS(2), thirty-one-Ch(3), g703(4)

ncmE1PortRepeaterLoopbackTimeout		1.3.6.1.4.1.321.1.3012.1008.1.9
This variable indicates the repeater loopback timeout in seconds for the card.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmE1PortCarrierFailureAlarmDeclareTime		1.3.6.1.4.1.321.1.3012.1008.1.10
This variable indicates the carrier failure alarm declare time in seconds for the card.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmE1PortServiceState		1.3.6.1.4.1.321.1.3012.1008.1.11
This variable indicates service state of the port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	out-of-service(1), in-service(2)

ncmE1PortIdlePattern		1.3.6.1.4.1.321.1.3012.1008.1.12
This variable indicates the idle pattern for the card.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmE1TimeSlot		1.3.6.1.4.1.321.1.3012.1008.1.13
This variable indicates the Time slot used for the given port directly from the hardware cross point switch for example slot 1-10, if slots 1 to 10 is used or 1,3,4 if slots 1,3 and 4 are used.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

ncmE1TimeSlotSelect		1.3.6.1.4.1.321.1.3012.1008.1.14
This variable indicates the number which is choosed for the inband/isdn timeslot.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmE1PortStatusTable		1.3.6.1.4.1.321.1.3012.1009
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmE1PortStatusEntry

ncmE1PortStatusEntry		1.3.6.1.4.1.321.1.3012.1009.1
An entry in the E1 Port Status Table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmE1PortStatusEntry

ncmE1PortStatusNIDIndex		1.3.6.1.4.1.321.1.3012.1009.1.1
This object identifies the node id index.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmE1PortStatusIndex		1.3.6.1.4.1.321.1.3012.1009.1.2
The index value which uniquely identifies the interface to which this entry is applicable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmE1PortCRC4Error		1.3.6.1.4.1.321.1.3012.1009.1.3
This variable indicates the occurance of CRC4 error.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmE1PortFramingSlip		1.3.6.1.4.1.321.1.3012.1009.1.4
This variable indicates the occurance of framing slip error.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmE1PortRAI		1.3.6.1.4.1.321.1.3012.1009.1.5
This variable indicates the occurance of RAI.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmE1PortLOFA		1.3.6.1.4.1.321.1.3012.1009.1.6
This variable indicates the occurance of LOFA.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmE1PortAIS		1.3.6.1.4.1.321.1.3012.1009.1.7
This variable indicates the occurance of AIS.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmE1PortLOS		1.3.6.1.4.1.321.1.3012.1009.1.8
This variable indicates the occurance of LOS.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmE1PortBPVThresholdExceeded		1.3.6.1.4.1.321.1.3012.1009.1.9
This variable indicates whether BPV threshold is exceeded or not.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmE1BlockErrorCounter		1.3.6.1.4.1.321.1.3012.1009.1.10
This variable indicates the Block Error Counter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1CodeViolationMode		1.3.6.1.4.1.321.1.3012.1009.1.11
This variable indicates whether HDB3 or FEBE should be counted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	count-HDB3(1), count-FEBE(2)

ncmE1CurrentHDB3ORFEBEErrorCounts		1.3.6.1.4.1.321.1.3012.1009.1.12
This variable indicates the Current HDB3/FEBE error counts.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1CurrentFrameErrorCounts		1.3.6.1.4.1.321.1.3012.1009.1.13
This variable indicates the current Frame Error counts.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1CurrentCRC4ErrorCounts		1.3.6.1.4.1.321.1.3012.1009.1.14
This variable indicates the current crc4 Error counts.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1ResetPerfCount		1.3.6.1.4.1.321.1.3012.1009.1.15
Reset E1 Performance Counters.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmE1PortSendRAI		1.3.6.1.4.1.321.1.3012.1009.1.16
This variable indicates whether the E1 Port Send RAI is enable or disable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmE1PortSendAIS		1.3.6.1.4.1.321.1.3012.1009.1.17
This variable indicates whether the E1 Port Send AIS is enable or disable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmE1PortRFA		1.3.6.1.4.1.321.1.3012.1009.1.18
This variable indicates whether the E1 Port RFA is on or off.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmE1PortBERThresholdExceeded		1.3.6.1.4.1.321.1.3012.1009.1.19
This variable indicates whether BER threshold is exceeded or not.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmE1PortLLB		1.3.6.1.4.1.321.1.3012.1009.1.20
This variable indicates whether LLB is on or off.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmE1PortPLB		1.3.6.1.4.1.321.1.3012.1009.1.21
This variable indicates whether PLB is on or off.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmE1PortLOC		1.3.6.1.4.1.321.1.3012.1009.1.22
This variable indicates whether LOC is on or off.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmE1PortTestPattern		1.3.6.1.4.1.321.1.3012.1009.1.23
This variable indicates the test patern in progress: 1 = none 2 = 3/24 3 = QRSS 4 = 2n20-1 5 = 1 in 8 6 = 2N15 - 1 7 = All Zeros 8 = 55 Octets 9 = all ones
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), three-24(2), qRSS(3), two-n-20-1(4), one-in-8(5), two-n-15-1(6), all-zeros(7), fifty-octets(8), all-ones(9)

ncmE1CurrentTable		1.3.6.1.4.1.321.1.3012.1010
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmE1CurrentEntry

ncmE1CurrentEntry		1.3.6.1.4.1.321.1.3012.1010.1
An entry in the ncm E1 Current table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmE1CurrentEntry

ncmE1CurrentNIDIndex		1.3.6.1.4.1.321.1.3012.1010.1.1
This object identifies the node id of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmE1CurrentIndex		1.3.6.1.4.1.321.1.3012.1010.1.2
The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interf as identified by the same value as a LineIndex object instance.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmE1CurrentEndType		1.3.6.1.4.1.321.1.3012.1010.1.3
The variable specifies the End Type.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	near-End(1), far-End(2)

ncmE1CRC4Status		1.3.6.1.4.1.321.1.3012.1010.1.4
The variable specifies the CRC4 Status.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

ncmE1Timestamp		1.3.6.1.4.1.321.1.3012.1010.1.5
The variable specifies the timestamp in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmE1Timestamp1		1.3.6.1.4.1.321.1.3012.1010.1.6
The variable specifies the timestamp in milliseconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmE1CurrentIntervalSec		1.3.6.1.4.1.321.1.3012.1010.1.7
The variable specifies the current interval in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmE1CurrentASs		1.3.6.1.4.1.321.1.3012.1010.1.8
The number of Availabe Seconds, encountered by a DS1 interface in the current 15 minute interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1CurrentUASs		1.3.6.1.4.1.321.1.3012.1010.1.9
The number of Out of Unavailable Seconds encountered by a DS1 interface in the current 15 minute interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1CurrentESs		1.3.6.1.4.1.321.1.3012.1010.1.10
The number of Errored Seconds encountered by a DS1 interface in the current 15 minute interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1CurrentSESs		1.3.6.1.4.1.321.1.3012.1010.1.11
The number of Severely Errored Seconds encountered by a DS1 interface in the current 15 minute interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1CurrentFAE		1.3.6.1.4.1.321.1.3012.1010.1.12
The number of Frame Alignment Error in Seconds encountered by a DS1 interface in the current 15 minute interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1CurrentBBE		1.3.6.1.4.1.321.1.3012.1010.1.13
The number of Background Block Error encountered by a DS1 interface in the current 15 minute interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1CurrentSEFSs		1.3.6.1.4.1.321.1.3012.1010.1.14
The number of Severly Error Framing seconds encountered by a DS1 interface in the current 15 minute interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1CurrentAISSs		1.3.6.1.4.1.321.1.3012.1010.1.15
The number of ncmAlarm Indication Signal seconds encountered by a DS1 interface in the current 15 minute interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1CurrentLOSSs		1.3.6.1.4.1.321.1.3012.1010.1.16
The number of Loss of Signal seconds encountered by a DS1 interface in the current 15 minute interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1CurrentLOFSs		1.3.6.1.4.1.321.1.3012.1010.1.17
The number of Loss of Signal seconds encountered by a DS1 interface in the current 15 minute interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1CurrentOOFSs		1.3.6.1.4.1.321.1.3012.1010.1.18
The number of Out Of Frame seconds encountered by a DS1 interface in the current 15 minute interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1CurrentCVPath		1.3.6.1.4.1.321.1.3012.1010.1.19
The number of Code Violation Path encountered by a DS1 interface in the current 15 minute interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1CurrentCVLine		1.3.6.1.4.1.321.1.3012.1010.1.20
The number of Code Violation Line encountered by a DS1 interface in the current 15 minute interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1CurrentESsLine		1.3.6.1.4.1.321.1.3012.1010.1.21
The number of Errored Seconds Line encountered by a DS1 interface in the current 15 minute interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1CurrentSESsLine		1.3.6.1.4.1.321.1.3012.1010.1.22
The number of Severely Errored Seconds Line encountered by a DS1 interface in the current 15 minute interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1CurrentFECPath		1.3.6.1.4.1.321.1.3012.1010.1.23
The number of Failure Event Count Path encountered by a DS1 interface in the current 15 minute interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1CurrentFECLine		1.3.6.1.4.1.321.1.3012.1010.1.24
The number of Failure Event Count Line encountered by a DS1 interface in the current 15 minute interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1IntervalTable		1.3.6.1.4.1.321.1.3012.1011
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmE1IntervalEntry

ncmE1IntervalEntry		1.3.6.1.4.1.321.1.3012.1011.1
An entry in the E1 Interval table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmE1IntervalEntry

ncmE1IntervalNIDIndex		1.3.6.1.4.1.321.1.3012.1011.1.1
The object specifies the node id index.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmE1IntervalIndex		1.3.6.1.4.1.321.1.3012.1011.1.2
The index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value as a LineIndex object instance.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmE1IntervalEndType		1.3.6.1.4.1.321.1.3012.1011.1.3
The variable specifies the End Type.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	near-End(1), far-End(2)

ncmE1IntervalNumber		1.3.6.1.4.1.321.1.3012.1011.1.4
A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals are valid).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..96

ncmE1IntervalASs		1.3.6.1.4.1.321.1.3012.1011.1.5
The number of Available Seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1IntervalUASs		1.3.6.1.4.1.321.1.3012.1011.1.6
The number of Unavailable Seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1IntervalESs		1.3.6.1.4.1.321.1.3012.1011.1.7
The number of Error Seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1IntervalSESs		1.3.6.1.4.1.321.1.3012.1011.1.8
The number of Severe Error Seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1IntervalFAE		1.3.6.1.4.1.321.1.3012.1011.1.9
The number of Frame Alignment Errors encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1IntervalBBE		1.3.6.1.4.1.321.1.3012.1011.1.10
The number of Background Block Errors encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1IntervalSEFSs		1.3.6.1.4.1.321.1.3012.1011.1.11
The number of Severly Error Framing seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1IntervalAISSs		1.3.6.1.4.1.321.1.3012.1011.1.12
The number of ncmAlarm Indication Signal seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1IntervalLOSSs		1.3.6.1.4.1.321.1.3012.1011.1.13
The number of Loss of Signal seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1IntervalLOFSs		1.3.6.1.4.1.321.1.3012.1011.1.14
The number of Loss of Signal seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1IntervalOOFSs		1.3.6.1.4.1.321.1.3012.1011.1.15
The number of Out Of Frame seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1IntervalCVPath		1.3.6.1.4.1.321.1.3012.1011.1.16
The number of Code Violation Path encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. This object only has significance for QUAD cards.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1IntervalCVLine		1.3.6.1.4.1.321.1.3012.1011.1.17
The number of Code Violation Line encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. This object only has significance for QUAD cards.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1IntervalESsLine		1.3.6.1.4.1.321.1.3012.1011.1.18
The number of Errored Seconds Line encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1IntervalSESsLine		1.3.6.1.4.1.321.1.3012.1011.1.19
The number of Severely Errored Seconds Line encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1IntervalFECPath		1.3.6.1.4.1.321.1.3012.1011.1.20
The number of Failure Event Count Path encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1IntervalFECLine		1.3.6.1.4.1.321.1.3012.1011.1.21
The number of Failure Event Count Line encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1TotalTable		1.3.6.1.4.1.321.1.3012.1012
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmE1TotalEntry

ncmE1TotalEntry		1.3.6.1.4.1.321.1.3012.1012.1
An entry in the Total Entry table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmE1TotalEntry

ncmE1TotalNIDIndex		1.3.6.1.4.1.321.1.3012.1012.1.1
The object specifies the node id index of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmE1TotalIndex		1.3.6.1.4.1.321.1.3012.1012.1.2
The index value which uniquely identifies the DS1 interface to which this entry is applica- ble. The interface identified by a particular value of this index is the same interf as identified by the same value as a LineIndex object instance.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmE1TotalEndType		1.3.6.1.4.1.321.1.3012.1012.1.3
The variable specifies the End Type.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	near-End(1), far-End(2)

ncmE1NumberOfValidInterval		1.3.6.1.4.1.321.1.3012.1012.1.4
The number of previous intervals for which valid data was collected. The value will be 96 unless the interface was brought on-line within the last 24 hours, in which case the value will be the number of complete 15 minute intervals the since interface has been online.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmE1TotalASs		1.3.6.1.4.1.321.1.3012.1012.1.5
The number of Available Seconds encountered by a DS1 interface in the previous 24 hour interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1TotalUASs		1.3.6.1.4.1.321.1.3012.1012.1.6
The number of Unavailable Seconds encoun- tered by a DS1 interface in the previous 24 hour interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1TotalESs		1.3.6.1.4.1.321.1.3012.1012.1.7
The number of Error Seconds encoun- tered by a DS1 interface in the previous 24 hour interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1TotalSESs		1.3.6.1.4.1.321.1.3012.1012.1.8
The number of Severly Errored Seconds encoun- tered by a DS1 interface in the previous 24 hour interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1TotalFAE		1.3.6.1.4.1.321.1.3012.1012.1.9
The number of Frame Alignment Signal errors encoun- tered by a DS1 interface in the previous 24 hour interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1TotalBBE		1.3.6.1.4.1.321.1.3012.1012.1.10
The number of Background Block Errors encoun- tered by a DS1 interface in the previous 24 hour interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1TotalSEFSs		1.3.6.1.4.1.321.1.3012.1012.1.11
The number of Severly Error Framing seconds encountered by a DS1 interface in 24 hour in- terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1TotalAISSs		1.3.6.1.4.1.321.1.3012.1012.1.12
The number of ncmAlarm Indication Signal seconds encountered by a DS1 interface in the 24 hour in- terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1TotalLOSSs		1.3.6.1.4.1.321.1.3012.1012.1.13
The number of Loss of Signal seconds encountered by a DS1 interface in the 24 hour in- terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1TotalLOFSs		1.3.6.1.4.1.321.1.3012.1012.1.14
The number of Loss of Signal seconds encountered by a DS1 interface in the 24 hour in- terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1TotalOOFSs		1.3.6.1.4.1.321.1.3012.1012.1.15
The number of Out Of Frame seconds encountered by a DS1 interface in the 24 hour in- terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1TotalCVPath		1.3.6.1.4.1.321.1.3012.1012.1.16
The number of Code Violation Path encountered by a DS1 interface in the 24 hour in- terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1TotalCVLine		1.3.6.1.4.1.321.1.3012.1012.1.17
The number of Code Violation Line encountered by a DS1 interface in the 24 hour in- terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1TotalESsLine		1.3.6.1.4.1.321.1.3012.1012.1.18
The number of Errored Seconds Line encountered by a DS1 interface in the 24 hour in- terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1TotalSESsLine		1.3.6.1.4.1.321.1.3012.1012.1.19
The number of Severely Errored Seconds Line encountered by a DS1 interface in the 24 hour in- terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1TotalFECPath		1.3.6.1.4.1.321.1.3012.1012.1.20
The number of Failure Event Count Path encountered by a DS1 interface in the 24 hour in- terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1TotalFECLine		1.3.6.1.4.1.321.1.3012.1012.1.21
The number of Failure Event Count Line encountered by a DS1 interface in the 24 hour in- terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1PrevTotalTable		1.3.6.1.4.1.321.1.3012.1013
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmE1PrevTotalEntry

ncmE1PrevTotalEntry		1.3.6.1.4.1.321.1.3012.1013.1
An entry in the Previous day total table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmE1PrevTotalEntry

ncmE1PrevTotalNIDIndex		1.3.6.1.4.1.321.1.3012.1013.1.1
The object specifies the node id index of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmE1PrevTotalIndex		1.3.6.1.4.1.321.1.3012.1013.1.2
The index value which uniquely identifies the DS1 interface to which this entry is applica- ble. The interface identified by a particular value of this index is the same interf as identified by the same value as a LineIndex object instance.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmE1PrevTotalEndType		1.3.6.1.4.1.321.1.3012.1013.1.3
The variable specifies the End Type .
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	near-End(1), far-End(2)

ncmE1PrevTotalASs		1.3.6.1.4.1.321.1.3012.1013.1.4
The number of Available Seconds encountered by a DS1 interface in the previous 24 hour interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1PrevTotalUASs		1.3.6.1.4.1.321.1.3012.1013.1.5
The number of Unavailable Seconds encoun- tered by a DS1 interface in the previous 24 hour interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1PrevTotalESs		1.3.6.1.4.1.321.1.3012.1013.1.6
The number of Error Seconds encoun- tered by a DS1 interface in the previous 24 hour interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1PrevTotalSESs		1.3.6.1.4.1.321.1.3012.1013.1.7
The number of Severly Errored Seconds encoun- tered by a DS1 interface in the previous 24 hour interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1PrevTotalFAE		1.3.6.1.4.1.321.1.3012.1013.1.8
The number of Frame Alignment Signal errors encoun- tered by a DS1 interface in the previous 24 hour interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1PrevTotalBBE		1.3.6.1.4.1.321.1.3012.1013.1.9
The number of Background Block Errors encoun- tered by a DS1 interface in the previous 24 hour interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1PrevTotalSEFSs		1.3.6.1.4.1.321.1.3012.1013.1.10
The number of Severly Error Framing seconds encountered by a DS1 interface in the prev 24 hour in- terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1PrevTotalAISSs		1.3.6.1.4.1.321.1.3012.1013.1.11
The number of ncmAlarm Indication Signal seconds encountered by a DS1 interface in the prev 24 hour in- terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1PrevTotalLOSSs		1.3.6.1.4.1.321.1.3012.1013.1.12
The number of Loss of Signal seconds encountered by a DS1 interface in the prev 24 hour in- terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1PrevTotalLOFSs		1.3.6.1.4.1.321.1.3012.1013.1.13
The number of Loss of Signal seconds encountered by a DS1 interface in the prev 24 hour in- terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1PrevTotalOOFSs		1.3.6.1.4.1.321.1.3012.1013.1.14
The number of Out Of Frame seconds encountered by a DS1 interface in the prev 24 hour in- terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1PrevTotalCVPath		1.3.6.1.4.1.321.1.3012.1013.1.15
The number of Code Violation Path encountered by a DS1 interface in the prev 24 hour in- terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1PrevTotalCVLine		1.3.6.1.4.1.321.1.3012.1013.1.16
The number of Code Violation Line encountered by a DS1 interface in the prev 24 hour in- terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1PrevTotalESsLine		1.3.6.1.4.1.321.1.3012.1013.1.17
The number of Errored Seconds Line encountered by a DS1 interface in the prev 24 hour in- terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1PrevTotalSESsLine		1.3.6.1.4.1.321.1.3012.1013.1.18
The number of Severely Errored Seconds Line encountered by a DS1 interface in the prev 24 hour in- terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1PrevTotalFECPath		1.3.6.1.4.1.321.1.3012.1013.1.19
The number of Failure Event Count Path encountered by a DS1 interface in the prev 24 hour in- terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1PrevTotalFECLine		1.3.6.1.4.1.321.1.3012.1013.1.20
The number of Failure Event Count Line encountered by a DS1 interface in the prev 24 hour in- terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmE1PerformanceSnapShotTable		1.3.6.1.4.1.321.1.3012.1014
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmE1PerformanceSnapShotEntry

ncmE1PerformanceSnapShotEntry		1.3.6.1.4.1.321.1.3012.1014.1
An entry in the E1 Performance Snap Shot Entry table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmE1PerformanceSnapShotEntry

ncmE1SnapShotNIDIndex		1.3.6.1.4.1.321.1.3012.1014.1.1
The object specifies the node id index of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmE1SnapShotIndex		1.3.6.1.4.1.321.1.3012.1014.1.2
The index value which uniquely identifies the DS1 interface to which this entry is applica- ble. The interface identified by a particular value of this index is the same interface as identified by the same value as a LineIndex object instance.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmE1SnapShotEndType		1.3.6.1.4.1.321.1.3012.1014.1.3
The variable specifies the End Type .
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	near-End(1), far-End(2)

ncmE1SnapShot		1.3.6.1.4.1.321.1.3012.1014.1.4
The variable specifies the option to intiate snap shot command.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmE1TimeStampSec		1.3.6.1.4.1.321.1.3012.1014.1.5
The variable specifies the Time Stamp in Seconds .
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmE1TimeMilliSec		1.3.6.1.4.1.321.1.3012.1014.1.6
The variable specifies the Time Stamp in milli Seconds .
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmE1SecInCurrInterval		1.3.6.1.4.1.321.1.3012.1014.1.7
The variable specifies the Seconds in the Current Interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmE1ResetPerfReg		1.3.6.1.4.1.321.1.3012.1014.1.8
Reset Performance Monitoring registers.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmE1PortLatchedStatusTable		1.3.6.1.4.1.321.1.3012.1015
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmE1PortLatchedStatusEntry

ncmE1PortLatchedStatusEntry		1.3.6.1.4.1.321.1.3012.1015.1
An entry in the ncm E1 Port Latched Status Table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmE1PortLatchedStatusEntry

ncmE1PortLatchedStatusNIDIndex		1.3.6.1.4.1.321.1.3012.1015.1.1
The object specifies the node id index of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmE1PortLatchedStatusIndex		1.3.6.1.4.1.321.1.3012.1015.1.2
The index value which uniquely identifies the interface to which this entry is applicable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmE1PortLatchedCRC4Error		1.3.6.1.4.1.321.1.3012.1015.1.3
This variable indicates the occurance Latched status of CRC4 error.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmE1PortLatchedFramingSlip		1.3.6.1.4.1.321.1.3012.1015.1.4
This variable indicates the occurance Latched status of framing slip error.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmE1PortLatchedRAI		1.3.6.1.4.1.321.1.3012.1015.1.5
This variable indicates the occurance Latched status of RAI.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmE1PortLatchedLOFA		1.3.6.1.4.1.321.1.3012.1015.1.6
This variable indicates the occurance Latched status of LOFA.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmE1PortLatchedAIS		1.3.6.1.4.1.321.1.3012.1015.1.7
This variable indicates the occurance Latched status of AIS.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmE1PortLatchedLOS		1.3.6.1.4.1.321.1.3012.1015.1.8
This variable indicates the occurance Latched Status of LOS.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmE1PortLatchedBPVThresholdExceeded		1.3.6.1.4.1.321.1.3012.1015.1.9
This variable indicates whether BPV threshold is exceeded or not in Latched state.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmE1ThresholdStatusTable		1.3.6.1.4.1.321.1.3012.1016
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmE1ThresholdStatusEntry

ncmE1ThresholdStatusEntry		1.3.6.1.4.1.321.1.3012.1016.1
An entry in the E1 Threshold Status Table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmE1ThresholdStatusEntry

ncmE1ThresholdStatusNIDIndex		1.3.6.1.4.1.321.1.3012.1016.1.1
The object specifies the node id index of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmE1ThresholdStatusIndex		1.3.6.1.4.1.321.1.3012.1016.1.2
This object is the identifier of an Interface on a managed device. If there is an ifEntry that is directly associated with this and only this DS1 interface, it should have the same value as ifIndex. Otherwise, the value exceeds ifNumber, and is a unique identifier following this rule: inside interfaces (e.g., equipment side) with even numbers and outside interfaces (e.g., network side) with odd numbers.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmE1CRCThreshold		1.3.6.1.4.1.321.1.3012.1016.1.3
This variable indicates the CRC Error Threshold value .
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmE1CRCExceeded		1.3.6.1.4.1.321.1.3012.1016.1.4
This variable indicates whether the CRC Error has exceeded the Threshold value or not.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmE1SESThreshold		1.3.6.1.4.1.321.1.3012.1016.1.5
This variable indicates the SES Error Threshold value .
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmE1SESExceeded		1.3.6.1.4.1.321.1.3012.1016.1.6
This variable indicates whether the SES Error has exceeded the Threshold value or not.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmE1UASThreshold		1.3.6.1.4.1.321.1.3012.1016.1.7
This variable indicates the UAS Error Threshold value .
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmE1UASExceeded		1.3.6.1.4.1.321.1.3012.1016.1.8
This variable indicates whether the UAS Error has exceeded the Threshold value or not.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmE1BPVThresholdst		1.3.6.1.4.1.321.1.3012.1016.1.9
This variable indicates the BPV Error Threshold value .
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmE1BPVExceeded		1.3.6.1.4.1.321.1.3012.1016.1.10
This variable indicates whether the BPV Error has exceeded the Threshold value or not.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmE1BERThreshold		1.3.6.1.4.1.321.1.3012.1016.1.11
This variable indicates the BPV Error Threshold value .
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmE1BERExceeded		1.3.6.1.4.1.321.1.3012.1016.1.12
This variable indicates whether the BER Error has exceeded the Threshold value or not.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmE1RestoreState		1.3.6.1.4.1.321.1.3012.1016.1.13
This variable indicates the Restore State of Threshold
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	out-of-servcie(1), in-servcie(2), disabled(3)

ncmE1LineRestoreSec		1.3.6.1.4.1.321.1.3012.1016.1.14
This variable indicates the number of seconds until the line restores.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmT1ConfigTable		1.3.6.1.4.1.321.1.3012.1017
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmT1ConfigEntry

ncmT1ConfigEntry		1.3.6.1.4.1.321.1.3012.1017.1
An entry in the ncm T1 Configuration table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmT1ConfigEntry

ncmT1ConfigNIDIndex		1.3.6.1.4.1.321.1.3012.1017.1.1
This object is the identifier of the node id index.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmT1LineIndex		1.3.6.1.4.1.321.1.3012.1017.1.2
This object is the identifier of an Interface on a managed device. If there is an ifEntry that is directly associated with this and only this DS1 interface, it should have the same value as ifIndex. Otherwise, the value exceeds ifNumber, and is a unique identifier following this rule: inside interfaces (e.g., equipment side) with even numbers and outside interfaces (e.g., network side) with odd numbers.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmT1CRC6		1.3.6.1.4.1.321.1.3012.1017.1.3
This variable indicates Whether CRC6 is enabled or not
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

ncmT1FramingFormat		1.3.6.1.4.1.321.1.3012.1017.1.4
This variable indicates the variety of Line implementing this circuit. The type of circuit affects the number of bits per second that the circuit can reasonably carry, as well as the interpretation of the usage and error statistics. The values, in sequence, describe: TITLE: SPECIFICATION: ESF Extended SuperFrame DS1 SF Super Frame
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	sF(1), eSF(2)

ncmT1LineCoding		1.3.6.1.4.1.321.1.3012.1017.1.5
This variable describes the variety of Zero Code Suppression used on the link, which in turn affects a number of its characteristics. B8ZS refers to the use of a specified pat- tern of normal bits and bipolar violations which are used to replace a sequence of eight zero bits. AMI refers to a mode wherein no zero code suppression is present and the line encoding does not solve the problem directly. In this application, the higher layer must provide data which meets or exceeds the pulse density re- quirements, such as inverting HDLC data.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	aMI(1), b8ZS(2)

ncmT1FramingType		1.3.6.1.4.1.321.1.3012.1017.1.6
This variable indicates the framing type in this T1 port, i.e., CAS-BR, CAS-CC, CCS
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	cAS-BR(1), cAS-CC(2), cCS(3)

ncmT1FDL		1.3.6.1.4.1.321.1.3012.1017.1.7
The variable specifies the Disable/Enable of the fdl State.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

ncmT1InbandISDNEnableDisable		1.3.6.1.4.1.321.1.3012.1017.1.8
This variable indicates the Inband, ISDN enable and disable options.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disablebothinbandisdn(1), enableinband(2), enableisdn(3)

ncmT1EnableNetLoopback		1.3.6.1.4.1.321.1.3012.1017.1.9
The variable specifies the Disable/Enable of the Network intiated Loopback.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

ncmT1EnableNetOnesDensity		1.3.6.1.4.1.321.1.3012.1017.1.10
The variable specifies the Disable/Enable of the Network One's Density.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

ncmT1DensityPattern		1.3.6.1.4.1.321.1.3012.1017.1.11
This variable indicates what type of density network is being sent on the port or line by the device. It only has significance only when object ncmT1EnableNetOnesDensity is enabled. The values mean : 'D80Zeros' refers to send a request for network one's density of 80 zeroes density pattern. 'D15Zeros' refers to send a request for network one's density of 15 zeroes density pattern. 'D12d5c80Zero'refers to send a request for 12.5% and 80 zeroes network one's density pattern. 'TR-62411' refers to sending a request for TR6241 network density pattern.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	d80Zeros(1), d15Zeros(2), d12d5c80Zero(3), tR-62411(4)

ncmT1EnableRepeaterLpbkTimeout		1.3.6.1.4.1.321.1.3012.1017.1.12
The variable specifies whether repeater loopback is enabled or not.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

ncmT1RepeaterLoopbackTimeout		1.3.6.1.4.1.321.1.3012.1017.1.13
The variable specifies the timeout value in seconds for repeater loopback.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmT1UserAlarmDeclareTime		1.3.6.1.4.1.321.1.3012.1017.1.14
The variable specifies the User ncmAlarm declaration Time in seconds.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmT1State		1.3.6.1.4.1.321.1.3012.1017.1.15
The variable specifies whether port state is in service or not.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	out-of-service(1), in-service(2)

ncmT1NetworkLBOEQLIZ		1.3.6.1.4.1.321.1.3012.1017.1.16
This variable indicates either (1) for long haul -- the db rate at which the line or port using, i.e., is 0 , -7.5db, -15db or -22.5db.[pvt]; or (2) for short haul -- the equalization at which the line or port using, i.e., is 0~133, 133~266, 266~399, 399~533 533~655 ft., which is only applicable in port 3 & 4 of dual csu card.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	bldLn-0db-FT-0-133(1), bldLnNeg7d5db-FT-133-266(2), bldLnNeg15db-FT-266-399(3), bldLnNeg22d5-FT-399-533(4), fT-533-655(5)

ncmT1TimeSlot		1.3.6.1.4.1.321.1.3012.1017.1.17
This variable represents the timeslots used for the given port directly from the hardware crosspoint switch for example 1-10 if slot 1 to 10 are selected and 1,3,5 if 1,3 and 5 are selected.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

ncmT1TimeSlotSelect		1.3.6.1.4.1.321.1.3012.1017.1.18
This variable indicates the number which is choosed for the inband/isdn timeslot.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmT1PortStatusTable		1.3.6.1.4.1.321.1.3012.1018
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmT1PortStatusEntry

ncmT1PortStatusEntry		1.3.6.1.4.1.321.1.3012.1018.1
An entry in the ncm T1 Port Status Table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmT1PortStatusEntry

ncmT1PortStatusNIDIndex		1.3.6.1.4.1.321.1.3012.1018.1.1
This object identifies the node id index.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmT1PortStatusIndex		1.3.6.1.4.1.321.1.3012.1018.1.2
The index value which uniquely identifies the interface to which this entry is applicable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmT1PortCRC6Error		1.3.6.1.4.1.321.1.3012.1018.1.3
This variable indicates the occurance of CRC6 error.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmT1PortFramingSlip		1.3.6.1.4.1.321.1.3012.1018.1.4
This variable indicates the occurance of framing slip error.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmT1PortRAI		1.3.6.1.4.1.321.1.3012.1018.1.5
This variable indicates the occurance of RAI.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmT1PortLOF		1.3.6.1.4.1.321.1.3012.1018.1.6
This variable indicates the occurance of LOF.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmT1PortAIS		1.3.6.1.4.1.321.1.3012.1018.1.7
This variable indicates the occurance of AIS.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmT1PortLOS		1.3.6.1.4.1.321.1.3012.1018.1.8
This variable indicates the occurance of LOS.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmT1PortBPVThresholdExceeded		1.3.6.1.4.1.321.1.3012.1018.1.9
This variable indicates whether BPV threshold is exceeded or not.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmT1BlockErrorCounter		1.3.6.1.4.1.321.1.3012.1018.1.10
This variable indicates the Block Error Counter .
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1BERExceeded		1.3.6.1.4.1.321.1.3012.1018.1.11
This variable indicates BER excceded or not
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmT1PortSendRAI		1.3.6.1.4.1.321.1.3012.1018.1.12
This variable indicates whether send RAI is on or off
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmT1PortSendAIS		1.3.6.1.4.1.321.1.3012.1018.1.13
This variable indicates whether send AIS is on or off
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmT1PortCGA		1.3.6.1.4.1.321.1.3012.1018.1.14
This variable indicates whether CGA is on or off
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmT1PortLLB		1.3.6.1.4.1.321.1.3012.1018.1.15
This variable indicates whether LLB is on or off
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmT1PortPLB		1.3.6.1.4.1.321.1.3012.1018.1.16
This variable indicates whether PLB is on or off
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmT1PortLOC		1.3.6.1.4.1.321.1.3012.1018.1.17
This variable indicates whether LOC is on or off
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmT1PortTestPattern		1.3.6.1.4.1.321.1.3012.1018.1.18
This variable indicates the test patern in progress: 1 = none 2 = 3/24 3 = QRSS 4 = 2n20-1 5 = 1 in 8 6 = 2N15 - 1 7 = All Zeros 8 = 55 Octets 9 = all ones
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), three-24(2), qRSS(3), two-n-20-1(4), one-in-8(5), two-n-15-1(6), all-zeros(7), fifty-octets(8), all-ones(9)

ncmT1CurrentTable		1.3.6.1.4.1.321.1.3012.1019
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmT1CurrentEntry

ncmT1CurrentEntry		1.3.6.1.4.1.321.1.3012.1019.1
An entry in the ncm T1 Current table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmT1CurrentEntry

ncmT1CurrentNIDIndex		1.3.6.1.4.1.321.1.3012.1019.1.1
This object identifies the node id of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmT1CurrentIndex		1.3.6.1.4.1.321.1.3012.1019.1.2
The index value which uniquely identifies the interf to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value as a LineIndex object instance.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmT1CurrentEndType		1.3.6.1.4.1.321.1.3012.1019.1.3
The variable specifies the End Type .
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	near-End(1), far-End(2)

ncmT1Timestamp		1.3.6.1.4.1.321.1.3012.1019.1.4
The variable specifies the Timestamp in seconds .
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmT1Timestamp1		1.3.6.1.4.1.321.1.3012.1019.1.5
The variable specifies the Timestamp in millieseconds .
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmT1CurrentIntervalSec		1.3.6.1.4.1.321.1.3012.1019.1.6
The variable specifies the Current Interval seconds .
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmT1CurrentASs		1.3.6.1.4.1.321.1.3012.1019.1.7
The number of Availabe Seconds, encountered by a DS1 interface in the current 15 minute inter- val.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1CurrentUASs		1.3.6.1.4.1.321.1.3012.1019.1.8
The number of Out of Unavailable Seconds encountered by a DS1 interface in the current 15 minute in- terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1CurrentESs		1.3.6.1.4.1.321.1.3012.1019.1.9
The number of Errored Seconds encountered by a DS1 interface in the current 15 minute in- terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1CurrentBESs		1.3.6.1.4.1.321.1.3012.1019.1.10
The number of Bursty Errored Seconds encountered by a DS1 interface in the current 15 minute in- terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1CurrentSESs		1.3.6.1.4.1.321.1.3012.1019.1.11
The number of Severely Errored Seconds encountered by a DS1 interface in the current 15 minute in- terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1CurrentSEFs		1.3.6.1.4.1.321.1.3012.1019.1.12
The number of Severely Errored Framing Seconds encountered by a DS1 interface in the current 15 minute in-terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1CurrentLOSs		1.3.6.1.4.1.321.1.3012.1019.1.13
The number of Loss of Signal Seconds encountered by a DS1 interface in the current 15 minute in- terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1CurrentAISs		1.3.6.1.4.1.321.1.3012.1019.1.14
The number of ncmAlarm Indication Signal Seconds encountered by a DS1 interface in the current 15 minute in-terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1CurrentLOFs		1.3.6.1.4.1.321.1.3012.1019.1.15
The number of Loss Of Frame Seconds encountered by a DS1 interface in the current 15 minute in- terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1CurrentOOFs		1.3.6.1.4.1.321.1.3012.1019.1.16
The number of Out Of Frame Seconds encountered by a DS1 interface in the current 15 minute in- terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1CurrentESsTypeA		1.3.6.1.4.1.321.1.3012.1019.1.17
The number of Errored seconds of type A encountered by a DS1 interface in the current 15 minute in- terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1CurrentSASs		1.3.6.1.4.1.321.1.3012.1019.1.18
The number of SEF/AIS encountered by a DS1 interface in the current 15 minute in- terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1CurrentCSSs		1.3.6.1.4.1.321.1.3012.1019.1.19
The number of controlled slip seconds encountered by a DS1 interface in the current 15 minute in- terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1CurrentLOFC		1.3.6.1.4.1.321.1.3012.1019.1.20
The number of Loss of frame counts encountered by a DS1 interface in the current 15 minute in- terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1CurrentFrameErrCount		1.3.6.1.4.1.321.1.3012.1019.1.21
The number of Framing Error Count encountered by a DS1 interface in the current 15 minute in- terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1CurrentErrorFreeSec		1.3.6.1.4.1.321.1.3012.1019.1.22
The number of Error Free Seconds encountered by a DS1 interface in the current 15 minute in- terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1CurrentDegradedMin		1.3.6.1.4.1.321.1.3012.1019.1.23
The number of Degraded Minutes encountered by a DS1 interface in the current 15 minute in- terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1IntervalTable		1.3.6.1.4.1.321.1.3012.1020
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmT1IntervalEntry

ncmT1IntervalEntry		1.3.6.1.4.1.321.1.3012.1020.1
An entry in the ncm T1 Interval table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmT1IntervalEntry

ncmT1IntervalNIDIndex		1.3.6.1.4.1.321.1.3012.1020.1.1
The object specifies the node id index.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmT1IntervalIndex		1.3.6.1.4.1.321.1.3012.1020.1.2
The index value which uniquely identifies the DS1 interface to which this entry is applica- ble. The interface identified by a particular value of this index is the same interface as identified by the same value as a LineIndex object instance.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmT1IntervalEndType		1.3.6.1.4.1.321.1.3012.1020.1.3
The variable specifies the End Type .
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	near-End(1), far-End(2)

ncmT1IntervalNumber		1.3.6.1.4.1.321.1.3012.1020.1.4
A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes inter- val (assuming that all 96 intervals are valid).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..96

ncmT1IntervalASs		1.3.6.1.4.1.321.1.3012.1020.1.5
The number of Available Seconds encountered by a DS1 interface in one of the previous 96, indi- vidual 15 minute, intervals.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1IntervalUASs		1.3.6.1.4.1.321.1.3012.1020.1.6
The number of Unavailable Seconds encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1IntervalESs		1.3.6.1.4.1.321.1.3012.1020.1.7
The number of Error Seconds encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1IntervalBESs		1.3.6.1.4.1.321.1.3012.1020.1.8
The number of Bursty Error Seconds encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1IntervalSESs		1.3.6.1.4.1.321.1.3012.1020.1.9
The number of Severe Error Seconds encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1IntervalSEFs		1.3.6.1.4.1.321.1.3012.1020.1.10
The number of Severely Errored Framing Seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1IntervalLOSs		1.3.6.1.4.1.321.1.3012.1020.1.11
The number of Loss of Signal Seconds encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1IntervalAISs		1.3.6.1.4.1.321.1.3012.1020.1.12
The number of ncmAlarm Indication Signal Seconds encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1IntervalLOFs		1.3.6.1.4.1.321.1.3012.1020.1.13
The number of Loss Of Frame Seconds encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1IntervalOOFs		1.3.6.1.4.1.321.1.3012.1020.1.14
The number of Out Of Frame Seconds encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1IntervalESsTypeA		1.3.6.1.4.1.321.1.3012.1020.1.15
The number of Errored seconds of type A encountered by a DS1 interface in one of the previous 96, individual 15 minute interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1IntervalSASs		1.3.6.1.4.1.321.1.3012.1020.1.16
The number of SEF/AIS encountered by a DS1 interface in one of the previous 96, individual 15 minute interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1IntervalCSSs		1.3.6.1.4.1.321.1.3012.1020.1.17
The number of controlled slip seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1IntervalLOFC		1.3.6.1.4.1.321.1.3012.1020.1.18
The number of Loss of frame counts encountered by a DS1 interface in one of the previous 96, individual 15 minute interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1IntervalFrameErr		1.3.6.1.4.1.321.1.3012.1020.1.19
The number of Framing Error Count encountered by a DS1 interface in one of the previous 96, individual 15 minute interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1IntervalErrFreeSec		1.3.6.1.4.1.321.1.3012.1020.1.20
The number of Error Free Seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1IntervalDegradMin		1.3.6.1.4.1.321.1.3012.1020.1.21
The number of Degraded Minutes encountered by a DS1 interface in one of the previous 96, individual 15 minute interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1TotalTable		1.3.6.1.4.1.321.1.3012.1021
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmT1TotalEntry

ncmT1TotalEntry		1.3.6.1.4.1.321.1.3012.1021.1
An entry in the DS1 Total Loss table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmT1TotalEntry

ncmT1TotalNIDIndex		1.3.6.1.4.1.321.1.3012.1021.1.1
The object specifies the node id index of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmT1TotalIndex		1.3.6.1.4.1.321.1.3012.1021.1.2
The index value which uniquely identifies the DS1 interface to which this entry is applica- ble. The interface identified by a particular value of this index is the same interface as identified by the same value as a LineIndex object instance.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmT1TotalEndType		1.3.6.1.4.1.321.1.3012.1021.1.3
The variable specifies the End Type .
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	near-End(1), far-End(2)

ncmT1NumberOfValidIntervals		1.3.6.1.4.1.321.1.3012.1021.1.4
The number of previous intervals for which valid data was collected. The value will be 96 unless the interface was brought on-line within the last 24 hours, in which case the value will be the number of complete 15 minute intervals the since interface has been online.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmT1TotalASs		1.3.6.1.4.1.321.1.3012.1021.1.5
The number of Available Seconds encountered by a DS1 interface in the previous 24 hour interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1TotalUASs		1.3.6.1.4.1.321.1.3012.1021.1.6
The number of Unavailable Seconds encoun- tered by a DS1 interface in the previous 24 hour interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1TotalESs		1.3.6.1.4.1.321.1.3012.1021.1.7
The number of Unavailable Seconds encoun- tered by a DS1 interface in the previous 24 hour interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1TotalBESs		1.3.6.1.4.1.321.1.3012.1021.1.8
The number of Unavailable Seconds encoun- tered by a DS1 interface in the previous 24 hour interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1TotalSESs		1.3.6.1.4.1.321.1.3012.1021.1.9
The number of Severly errored Seconds encoun- tered by a DS1 interface in the previous 24 hour interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1TotalSEFs		1.3.6.1.4.1.321.1.3012.1021.1.10
The number of Severly Errored frame Seconds encoun- tered by a DS1 interface in the previous 24 hour interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1TotalLOSs		1.3.6.1.4.1.321.1.3012.1021.1.11
The number of Loss Of Signal Errors encoun- tered by a DS1 interface in the previous 24 hour interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1TotalAISs		1.3.6.1.4.1.321.1.3012.1021.1.12
The number of ncmAlarm Indication Signal Seconds encoun- tered by a DS1 interface in the previous 24 hour interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1TotalLOFs		1.3.6.1.4.1.321.1.3012.1021.1.13
The number of Loss Of Frame Seconds encoun- tered by a DS1 interface in the previous 24 hour interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1TotalOOFs		1.3.6.1.4.1.321.1.3012.1021.1.14
The number of Out Of Frame Seconds encoun- tered by a DS1 interface in the previous 24 hour interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1TotalESsTypeA		1.3.6.1.4.1.321.1.3012.1021.1.15
The number of Errored seconds of type A encountered by a DS1 interface in the previous 24 hour in terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1TotalSASs		1.3.6.1.4.1.321.1.3012.1021.1.16
The number of SEF/AIS encountered by a DS1 interface in the previous 24 hour in- terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1TotalCSSs		1.3.6.1.4.1.321.1.3012.1021.1.17
The number of controlled slip seconds encountered by a DS1 interface in the previous 24 hour in- terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1TotalLOFC		1.3.6.1.4.1.321.1.3012.1021.1.18
The number of Loss of frame counts encountered by a DS1 interface in the previous 24 hour in- terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1TotalFrameErrCount		1.3.6.1.4.1.321.1.3012.1021.1.19
The number of Framing Error Count encountered by a DS1 interface in the previous 24 hour in- terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1TotalErrorFreeSec		1.3.6.1.4.1.321.1.3012.1021.1.20
The number of Error free seconds encountered by a DS1 interface in the previous 24 hour in- terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1TotalDegradedMin		1.3.6.1.4.1.321.1.3012.1021.1.21
The number of Degraded Minutes encountered by a DS1 interface in the previous 24 hour in- terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1PrevTotalTable		1.3.6.1.4.1.321.1.3012.1022
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmT1PrevTotalEntry

ncmT1PrevTotalEntry		1.3.6.1.4.1.321.1.3012.1022.1
An entry in the DS1 Total Loss table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmT1PrevTotalEntry

ncmT1PrevTotalNIDIndex		1.3.6.1.4.1.321.1.3012.1022.1.1
The object specifies the node id index of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmT1PrevTotalIndex		1.3.6.1.4.1.321.1.3012.1022.1.2
The index value which uniquely identifies the DS1 interface to which this entry is applica- ble. The interface identified by a particular value of this index is the same interface as identified by the same value as a LineIndex object instance.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmT1PrevTotalEndType		1.3.6.1.4.1.321.1.3012.1022.1.3
The variable specifies the End Type .
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	near-End(1), far-End(2)

ncmT1PrevTotalASs		1.3.6.1.4.1.321.1.3012.1022.1.4
The number of Available Seconds encountered by a DS1 interface in the previous 24 hour interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1PrevTotalUASs		1.3.6.1.4.1.321.1.3012.1022.1.5
The number of Unavailable Seconds encoun- tered by a DS1 interface in the previous 24 hour interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1PrevTotalESs		1.3.6.1.4.1.321.1.3012.1022.1.6
The number of Unavailable Seconds encoun- tered by a DS1 interface in the previous 24 hour interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1PrevTotalBESs		1.3.6.1.4.1.321.1.3012.1022.1.7
The number of Unavailable Seconds encoun- tered by a DS1 interface in the previous 24 hour interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1PrevTotalSESs		1.3.6.1.4.1.321.1.3012.1022.1.8
The number of Severly Errored Seconds encoun- tered by a DS1 interface in the previous 24 hour interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1PrevTotalSEFs		1.3.6.1.4.1.321.1.3012.1022.1.9
The number of Severly Errored frame Seconds encoun- tered by a DS1 interface in the previous 24 hour interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1PrevTotalLOSs		1.3.6.1.4.1.321.1.3012.1022.1.10
The number of Loss Of Signal Errors encoun- tered by a DS1 interface in the previous 24 hour interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1PrevTotalAISs		1.3.6.1.4.1.321.1.3012.1022.1.11
The number of ncmAlarm Indication Signal Seconds encoun- tered by a DS1 interface in the previous 24 hour interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1PrevTotalLOFs		1.3.6.1.4.1.321.1.3012.1022.1.12
The number of Loss Of Frame Seconds encoun- tered by a DS1 interface in the previous 24 hour interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1PrevTotalOOFs		1.3.6.1.4.1.321.1.3012.1022.1.13
The number of Out Of Frame Seconds encoun- tered by a DS1 interface in the previous 24 hour interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1PrevTotalESsTypeA		1.3.6.1.4.1.321.1.3012.1022.1.14
The number of Errored seconds of type A encountered by a DS1 interface in the previous 24 hour in- terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1PrevTotalSASs		1.3.6.1.4.1.321.1.3012.1022.1.15
The number of SEF/AIS encountered by a DS1 interface in the previous 24 hour in- terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1PrevTotalCSSs		1.3.6.1.4.1.321.1.3012.1022.1.16
The number of controlled slip seconds encountered by a DS1 interface in the previous in- terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1PrevTotalLOFC		1.3.6.1.4.1.321.1.3012.1022.1.17
The number of Loss of frame counts encountered by a DS1 interface in the previous in- terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1PrevTotalFrameErrCount		1.3.6.1.4.1.321.1.3012.1022.1.18
The number of Framing Error Count encountered by a DS1 interface in the previous in- terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1PrevTotalErrorFreeSec		1.3.6.1.4.1.321.1.3012.1022.1.19
The number of Error free seconds encountered by a DS1 interface in the previous in- terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1PrevTotalDegradedMin		1.3.6.1.4.1.321.1.3012.1022.1.20
The number of Degraded Minutes encountered by a DS1 interface in the previous in- terval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1PreformanceSnapShotTable		1.3.6.1.4.1.321.1.3012.1023
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmT1PreformanceSnapShotEntry

ncmT1PreformanceSnapShotEntry		1.3.6.1.4.1.321.1.3012.1023.1
An entry in the T1 Performance Snap Shot Entry table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmT1PreformanceSnapShotEntry

ncmT1SnapShotNIDIndex		1.3.6.1.4.1.321.1.3012.1023.1.1
The object specifies the node id index of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmT1SnapShotIndex		1.3.6.1.4.1.321.1.3012.1023.1.2
The index value which uniquely identifies the DS1 interface to which this entry is applica- ble. The interface identified by a particular value of this index is the same interface as identified by the same value as a LineIndex object instance.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmT1SnapShotEndType		1.3.6.1.4.1.321.1.3012.1023.1.3
The variable specifies the End Type .
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	near-End(1), far-End(2)

ncmT1SnapShot		1.3.6.1.4.1.321.1.3012.1023.1.4
The variable specifies the option to intiate snap shot command.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmT1TimeStampSec		1.3.6.1.4.1.321.1.3012.1023.1.5
The variable specifies the Time Stamp in Seconds .
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmT1TimeStampMilliSec		1.3.6.1.4.1.321.1.3012.1023.1.6
The variable specifies the Time Stamp in milli Seconds .
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmT1CurrIntervalSec		1.3.6.1.4.1.321.1.3012.1023.1.7
The variable specifies the current interval in Seconds .
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmT1ResetPerfReg		1.3.6.1.4.1.321.1.3012.1023.1.8
Reset Performance Monitoring registers.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmAdvancedT1ConfigTable		1.3.6.1.4.1.321.1.3012.1024
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmAdvancedT1ConfigEntry

ncmAdvancedT1ConfigEntry		1.3.6.1.4.1.321.1.3012.1024.1
An entry in the Advanced T1 Configuration table .
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmAdvancedT1ConfigEntry

ncmAdvancedT1NIDIndex		1.3.6.1.4.1.321.1.3012.1024.1.1
The object specifies the node id of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmAdvancedT1LineIndex		1.3.6.1.4.1.321.1.3012.1024.1.2
The index value which uniquely identifies the interface to which this entry is applicable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmadvfdlMode		1.3.6.1.4.1.321.1.3012.1024.1.3
The variable specifies the fdl mode which is bit 0 of fdl Parameter1.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	terminated(1), pass(2)

ncmadvfdlStandard		1.3.6.1.4.1.321.1.3012.1024.1.4
The variable specifies the fdl standard which is bits 1 and bit 2 of fdl Parameter1.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	type-54016(1), type-T1-403(2), type-both(3)

ncmadvfdlPerformanceReport		1.3.6.1.4.1.321.1.3012.1024.1.5
The variable specifies the fdl standard which is bits 3 and bit 4 of fdl Parameter1.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), user(2), telco(3)

ncmadvfdlLBEnable		1.3.6.1.4.1.321.1.3012.1024.1.6
The variable specifies the Disable/Enable of the fdl Loopback which is bit 0 of the fdl-loop
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

ncmadvfdlLLBT1BOPMsg		1.3.6.1.4.1.321.1.3012.1024.1.7
The variable specifies the Disable/Enable of the send/receive of the LLB T1.403 BOP Messages. It is the bit 1 of the fdl-loop.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

ncmadvfdlPLBT1BOPMsg		1.3.6.1.4.1.321.1.3012.1024.1.8
The variable specifies the Disable/Enable of the send/receive of the PLB T1.403 BOP Messages. It is the bit 2 of the fdl-loop
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

ncmadvfdlIdlePattern		1.3.6.1.4.1.321.1.3012.1024.1.9
The variable specifies the fdl idle pattern which is bit 0 of fdl Parameter2.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	all-ones(1), flags(2)

ncmadvfdlMonitoringCsuType		1.3.6.1.4.1.321.1.3012.1024.1.10
The variable specifies the fdl standard which is bits 1 and bit 2 of fdl Parameter2.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	polling(1), no-polling(2), unsolicited-messages(3)

ncmT1LatchedStatusTable		1.3.6.1.4.1.321.1.3012.1025
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmT1LatchedStatusEntry

ncmT1LatchedStatusEntry		1.3.6.1.4.1.321.1.3012.1025.1
An entry in the DS1 Port Latched Status Table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmT1LatchedStatusEntry

ncmT1LatchedStatusNIDIndex		1.3.6.1.4.1.321.1.3012.1025.1.1
The object specifies the node id of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmT1LatchedStatusIndex		1.3.6.1.4.1.321.1.3012.1025.1.2
The index value which uniquely identifies the interface to which this entry is applicable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmT1LatchedStatusEndType		1.3.6.1.4.1.321.1.3012.1025.1.3
The variable specifies the End Type .
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	near-End(1), far-End(2)

ncmT1LatchedStatusCRC6Error		1.3.6.1.4.1.321.1.3012.1025.1.4
This variable indicates the occurance of CRC6 error of the port latched status.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmT1LatchedStatusFramingSlip		1.3.6.1.4.1.321.1.3012.1025.1.5
This variable indicates the occurance of framing slip error of the port latched status.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmT1LatchedStatusRAI		1.3.6.1.4.1.321.1.3012.1025.1.6
This variable indicates the occurance Latched status of RAI for T1 port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmT1LatchedStatusLOF		1.3.6.1.4.1.321.1.3012.1025.1.7
This variable indicates the occurance Latched status of LOF of T1 port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmT1LatchedStatusAIS		1.3.6.1.4.1.321.1.3012.1025.1.8
This variable indicates the occurance T1 port Latched status of AIS.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmT1LatchedStatusLOS		1.3.6.1.4.1.321.1.3012.1025.1.9
This variable indicates the occurance Latched Status of LOS for T1 port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmT1LatchedStatusBPVThreExcd		1.3.6.1.4.1.321.1.3012.1025.1.10
This variable indicates the BPV Threshold Exceeded of T1 port Latched Status.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1LatchedStatusBERExceeded		1.3.6.1.4.1.321.1.3012.1025.1.11
This variable indicates the BER Exceeded of T1 port Latched Status.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1ThresholdStatusTable		1.3.6.1.4.1.321.1.3012.1026
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmT1ThresholdStatusEntry

ncmT1ThresholdStatusEntry		1.3.6.1.4.1.321.1.3012.1026.1
An entry in the DS1 Port Threshold Status Table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmT1ThresholdStatusEntry

ncmT1ThresholdStatusNIDIndex		1.3.6.1.4.1.321.1.3012.1026.1.1
The object specifies the node id of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmT1ThresholdStatusIndex		1.3.6.1.4.1.321.1.3012.1026.1.2
The index value which uniquely identifies the interface to which this entry is applicable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmT1ThresholdStatusEndType		1.3.6.1.4.1.321.1.3012.1026.1.3
The variable specifies the End Type .
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	near-End(1), far-End(2)

ncmT1ThresholdRestoreState		1.3.6.1.4.1.321.1.3012.1026.1.4
This variable indicates the restore state of T1 port threshold status.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	out-of-service(1), in-service(2), disabled(3)

ncmT1ThresholdSecLineRestore		1.3.6.1.4.1.321.1.3012.1026.1.5
This variable indicates the number of second until line restores(if restore mode is AUTO) of T1 port threshold Status.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1ThresholdBERExceeded		1.3.6.1.4.1.321.1.3012.1026.1.6
This variable indicates BER exceeded or not of T1 Threshold Status.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmT1ThresholdBERCount		1.3.6.1.4.1.321.1.3012.1026.1.7
This variable indicates the BER Count(reserved - always 0) of T1 port threshold Status.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1ThresholdSESExceeded		1.3.6.1.4.1.321.1.3012.1026.1.8
This variable indicates SES exceeded or not of T1 Threshold Status.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmT1ThresholdSESCount		1.3.6.1.4.1.321.1.3012.1026.1.9
This variable indicates the SES Count of T1 port threshold Status.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1ThresholdUASExceeded		1.3.6.1.4.1.321.1.3012.1026.1.10
This variable indicates UAS exceeded or not of T1 Threshold Status.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmT1ThresholdUASCount		1.3.6.1.4.1.321.1.3012.1026.1.11
This variable indicates the UAS Count of T1 port threshold Status.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1ThresholdCRCExceeded		1.3.6.1.4.1.321.1.3012.1026.1.12
This variable indicates CRC exceeded or not of T1 Threshold Status.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmT1ThresholdCRCCount		1.3.6.1.4.1.321.1.3012.1026.1.13
This variable indicates the CRC Count of T1 port threshold Status.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1ThresholdBPVExceeded		1.3.6.1.4.1.321.1.3012.1026.1.14
This variable indicates BPV exceeded or not of T1 Threshold Status.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmT1ThresholdBPVCount		1.3.6.1.4.1.321.1.3012.1026.1.15
This variable indicates the BPV Count of T1 port threshold Status.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1PerformanceCountersTable		1.3.6.1.4.1.321.1.3012.1027
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmT1PerformanceCountersEntry

ncmT1PerformanceCountersEntry		1.3.6.1.4.1.321.1.3012.1027.1
An entry in the ncm T1 Performance Counters Entry table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmT1PerformanceCountersEntry

ncmT1PerfCountNIDIndex		1.3.6.1.4.1.321.1.3012.1027.1.1
The object specifies the node id index of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmT1PerfCountIndex		1.3.6.1.4.1.321.1.3012.1027.1.2
The index value which uniquely identifies the interface to which this entry is applicable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmT1PerfCountEndType		1.3.6.1.4.1.321.1.3012.1027.1.3
The variable specifies the End Type of T1 Performance Counter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	near-End(1), far-End(2)

ncmT1PerfCountFrameMode		1.3.6.1.4.1.321.1.3012.1027.1.4
The variable specifies the Framing Mode of T1 Performance Counter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	d4(1), esf(2)

ncmT1PerfCountCurESFErrEvt		1.3.6.1.4.1.321.1.3012.1027.1.5
This variable specifies the Current ESF events of T1 Performance Counter. This object has no significance for QUAD cards.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1PerfCountCurBPVErrCnt		1.3.6.1.4.1.321.1.3012.1027.1.6
This variable specifies the Current BPV counts of T1 Performance Counter. This object has no significance for QUAD cards.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1PerfCountCurFrameErrCnt		1.3.6.1.4.1.321.1.3012.1027.1.7
This variable specifies the Current Frame Error counts of T1 Performance Counter. This object has no significance for QUAD cards.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1PerfCountCurCRC6Error		1.3.6.1.4.1.321.1.3012.1027.1.8
This variable specifies the Current CRC-6 errors of T1 Performance Counter. This object has no significance for QUAD cards.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmT1ResetPerfCount		1.3.6.1.4.1.321.1.3012.1027.1.9
Reset ncm T1 Performance Counters.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmDataPortConfigTable		1.3.6.1.4.1.321.1.3012.1028
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmDataPortConfigEntry

ncmDataPortConfigEntry		1.3.6.1.4.1.321.1.3012.1028.1
An entry in the ncmData Port Configuration Entry table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmDataPortConfigEntry

ncmDataPortConfigNIDIndex		1.3.6.1.4.1.321.1.3012.1028.1.1
The object specifies the node id of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmDataPortConfigIndex		1.3.6.1.4.1.321.1.3012.1028.1.2
The index value which uniquely identifies the interface to which this entry is applicable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmDataPortConfigMode		1.3.6.1.4.1.321.1.3012.1028.1.3
The variable specifies the data port mode whether it is configured as DTE/DCE.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	dce(1), dte(2)

ncmDataPortConfigLineIndicate		1.3.6.1.4.1.321.1.3012.1028.1.4
The variable specifies the control line indicator for X.21 only, set to 0 if line is low while set to 1 if line is high.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	active-low(1), active-high(2)

ncmDataPortLineStatusCDCC		1.3.6.1.4.1.321.1.3012.1028.1.5
The variable specifies the bit 0 status of control line; where 0=low, 1=high; Status is CD/DTR if Mode = DTE while is CC/DSR if Mode = DCE
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	low(1), high(2)

ncmDataPortLineStatusCACB		1.3.6.1.4.1.321.1.3012.1028.1.6
The variable specifies the bit 1 status of control line; where 0=low, 1=high; Status is CA/RTS if Mode = DTE while is CB/CTS if Mode = DCE
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	low(1), high(2)

ncmDataPortLineStatusLLCJ		1.3.6.1.4.1.321.1.3012.1028.1.7
The variable specifies the bit 2 status of control line; where 0=low, 1=high; Status is LL if Mode = DTE while is CJ/DCD if Mode = DCE
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	low(1), high(2)

ncmDataPortLineStatusRLTM		1.3.6.1.4.1.321.1.3012.1028.1.8
The variable specifies the bit 2 status of control line; where 0=low, 1=high; Status is RL if Mode = DTE while is TM if Mode = DCE
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	low(1), high(2)

ncmDataPortConfigLOS		1.3.6.1.4.1.321.1.3012.1028.1.9
The variable specifies the bit 7 status of control line; where 0=disable, 1=enable; Status is LOS Mode
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

ncmDataPortConfigServiceState		1.3.6.1.4.1.321.1.3012.1028.1.10
The variable specifies the service state of this data port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	not-in-service(1), in-service(2)

ncmDataPortConfigClkOpt		1.3.6.1.4.1.321.1.3012.1028.1.11
The variable specifies the clocking option of this data port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	st(1), invertedst(2), tt(3)

ncmDataPortStatusTable		1.3.6.1.4.1.321.1.3012.1029
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmDataPortStatusEntry

ncmDataPortStatusEntry		1.3.6.1.4.1.321.1.3012.1029.1
An entry in the ncmData Port Status Entry table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmDataPortStatusEntry

ncmDataPortStatusNIDIndex		1.3.6.1.4.1.321.1.3012.1029.1.1
The object specifies the node id of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmDataPortStatusIndex		1.3.6.1.4.1.321.1.3012.1029.1.2
The index value which uniquely identifies the interface to which this entry is applicable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmDataPortStatusMode		1.3.6.1.4.1.321.1.3012.1029.1.3
The variable specifies the data port mode whether it is configured as DCE/DCE.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	dce(1), dte(2)

ncmDataPortStatusLineIndicate		1.3.6.1.4.1.321.1.3012.1029.1.4
The variable specifies the control line indicator for X.21 only, set to 0 if line is low while set to 1 if line is high.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	active-low(1), active-high(2)

ncmDataPortStatusLineCDCC		1.3.6.1.4.1.321.1.3012.1029.1.5
The variable specifies the bit 0 status of control line; where 0=low, 1=high; Status is CD/DTR if Mode = DTE while is CC/DSR if Mode = DCE
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	low(1), high(2)

ncmDataPortStatusLineCACB		1.3.6.1.4.1.321.1.3012.1029.1.6
The variable specifies the bit 1 status of control line; where 0=low, 1=high; Status is CA/RTS if Mode = DTE while is CB/CTS if Mode = DCE
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	low(1), high(2)

ncmDataPortStatusLineLLCJ		1.3.6.1.4.1.321.1.3012.1029.1.7
The variable specifies the bit 2 status of control line; where 0=low, 1=high; Status is LL if Mode = DTE while is CJ/DCD if Mode = DCE
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	low(1), high(2)

ncmDataPortStatusLineRLTM		1.3.6.1.4.1.321.1.3012.1029.1.8
The variable specifies the bit 3 status of control line; where 0=low, 1=high; Status is RL if Mode = DTE while is TM if Mode = DCE
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	low(1), high(2)

ncmDataPortStatusLineLOS		1.3.6.1.4.1.321.1.3012.1029.1.9
The variable specifies the bit 7 status of control line; where 0=disable, 1=enable; Status is LOS Mode
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

ncmDataPortStatusServiceState		1.3.6.1.4.1.321.1.3012.1029.1.10
The variable specifies the service state of this data port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	not-in-service(1), in-service(2)

ncmDataPortStatusCimType		1.3.6.1.4.1.321.1.3012.1029.1.11
The variable specifies the connector interface module type of this data port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	cim-2000-E1(16), cim-2002-E1(17), cim-2003-E1(18), cim-2004-E1(19), cim-2005-E1(20), cim-2006-E1(21), cim-2101-T1(32), cim-2102-T1(33), cim-2164-T1(34), cim-2061-E1(56), cim-UNINSTALLED(255)

ncmDataPortStatusLoopback		1.3.6.1.4.1.321.1.3012.1029.1.12
The variable specifies the loopback diagnostic status of this data port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

ncmDataPortTestPattern		1.3.6.1.4.1.321.1.3012.1029.1.13
The variable specifies the test pattern in progress of this data port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), d3-in-D24(2), qrss(3)

ncmDataPortTstPatErrCount		1.3.6.1.4.1.321.1.3012.1029.1.14
This variable indicates the Test Pattern Error Count.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ncmALARMConfigTable		1.3.6.1.4.1.321.1.3012.1030
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmALARMConfigEntry

ncmALARMConfigEntry		1.3.6.1.4.1.321.1.3012.1030.1
An entry in the ncmAlarm Configure table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmALARMConfigEntry

ncmAlarmConfigNIDIndex		1.3.6.1.4.1.321.1.3012.1030.1.1
The object specifies the node id of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmAlarmConfigIndex		1.3.6.1.4.1.321.1.3012.1030.1.2
The index value which uniquely identifies the interface to which this entry is applicable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmAlmCfgDomain		1.3.6.1.4.1.321.1.3012.1030.1.3
The variable specifies the Domain the alarm came from.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmAlmCfgSrcAddr		1.3.6.1.4.1.321.1.3012.1030.1.4
The variable specifies the Address where the alarm came from.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

ncmAlmCfgCard		1.3.6.1.4.1.321.1.3012.1030.1.5
The variable specifies the card in a specified shelf.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmAlmCfgShelf		1.3.6.1.4.1.321.1.3012.1030.1.6
The variable specifies the particular shelf.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmAlmCfgE1T1Port1EnableAlmRpt		1.3.6.1.4.1.321.1.3012.1030.1.7
The variable Enable/Disable the alarm reporting of the Port #1 for E1/T1 by specifying the bit 0; 1=yes, 0=no.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

ncmAlmCfgE1T1Port2EnableAlmRpt		1.3.6.1.4.1.321.1.3012.1030.1.8
The variable Enable/Disable the alarm reporting of the Port #2 for E1/T1 by specifying the bit 1; 1=yes, 0=no.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

ncmAlmCfgE1T1Port3EnableAlmRpt		1.3.6.1.4.1.321.1.3012.1030.1.9
The variable Enable/Disable the alarm reporting of the Port #3 for E1/T1 by specifying the bit 0; 1=yes, 0=no.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

ncmAlmCfgE1T1Port4EnableAlmRpt		1.3.6.1.4.1.321.1.3012.1030.1.10
The variable Enable/Disable the alarm reporting of the Port #4 for E1/T1 by specifying the bit 1; 1=yes, 0=no.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

ncmAlmCfgDataPort1EnableAlmRpt		1.3.6.1.4.1.321.1.3012.1030.1.11
The variable Enable/Disable the alarm reporting of the Port #1 for ncmData by specifying the bit 0; 1=yes, 0=no. This object has no significance in QUAD cards.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2), not-applicable(3)

ncmAlmCfgDataPort2EnableAlmRpt		1.3.6.1.4.1.321.1.3012.1030.1.12
The variable Enable/Disable the alarm reporting of the Port #2 for ncmData by specifying the bit 1; 1=yes, 0=no. This object has no significance in QUAD cards.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2), not-applicable(3)

ncmAlmCfgEnableCardAlmRpt		1.3.6.1.4.1.321.1.3012.1030.1.13
The variable Enable/Disable the alarm reporting for this card.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

ncmAlmCfgDeclareTime		1.3.6.1.4.1.321.1.3012.1030.1.14
The variable specifies the alarm declaration time (in seconds).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmCURRENTAlarmMsgTable		1.3.6.1.4.1.321.1.3012.1031
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmCURRENTAlarmMsgEntry

ncmCURRENTAlarmMsgEntry		1.3.6.1.4.1.321.1.3012.1031.1
An entry in the Current ncm Alarm Message table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmCURRENTAlarmMsgEntry

ncmCurrAlarmMsgNIDIndex		1.3.6.1.4.1.321.1.3012.1031.1.1
The object specifies the node id of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmCurrAlarmMsgIndex		1.3.6.1.4.1.321.1.3012.1031.1.2
The index value which uniquely identifies the interface to which this entry is applicable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmCurrAlarmMsgNumber		1.3.6.1.4.1.321.1.3012.1031.1.3
A number between 1 and 15, where 1 is the latest alarm and 15 is the most recent alarm captured inside the data base.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..15

ncmCurrAlarmMsgEquipID		1.3.6.1.4.1.321.1.3012.1031.1.4
The object specifies the Equipment ID of the card.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmPrevAlarmMsgTable		1.3.6.1.4.1.321.1.3012.1032
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmPrevAlarmMsgEntry

ncmPrevAlarmMsgEntry		1.3.6.1.4.1.321.1.3012.1032.1
An entry in the Enhanced ncmAlarm Configure table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmPrevAlarmMsgEntry

ncmPrevAlarmMsgNIDIndex		1.3.6.1.4.1.321.1.3012.1032.1.1
The object specifies the node id of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmPrevAlarmMsgIndex		1.3.6.1.4.1.321.1.3012.1032.1.2
The index value which uniquely identifies the interface to which this entry is applicable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmPrevAlarmMsgNumber		1.3.6.1.4.1.321.1.3012.1032.1.3
A number between 1 and 15, where 1 is the latest alarm and 15 is the most recent alarm captured inside the data base.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..15

ncmPrevAlarmMsgTimeStampSec		1.3.6.1.4.1.321.1.3012.1032.1.4
The variable specifies the Time Stamp in Seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmPrevAlarmMsgTimeStampms		1.3.6.1.4.1.321.1.3012.1032.1.5
The variable specifies the Time Stamp in milli Seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmPrevAlarmMsgAlarmCode		1.3.6.1.4.1.321.1.3012.1032.1.6
The variable specifies the ncm Alarm Code of the card.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmPrevAlarmMsgAlarmInstance		1.3.6.1.4.1.321.1.3012.1032.1.7
The object specifies the ncm Alarm Instance.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..ffffffff

ncmPrevAlarmMsgObjType		1.3.6.1.4.1.321.1.3012.1032.1.8
The variable specifies the Object Type of the ncmAlarm refer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	e1-PortID(1), dataPort(2), circuit(3), power(4), clkRef(5), timeBus(6), refBus(7), notUsed(8), software(9), equipment(10), t1-PortID(11), dS3-Port(16), hssi-Port(17)

ncmPrevAlarmMsgSeverity		1.3.6.1.4.1.321.1.3012.1032.1.9
The variable specifies the severity of the ncm Alarm.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	cleared(1), informational(2), warning(3), minor(4), major(5), critical(6)

ncmEnhanAlmCfgTable		1.3.6.1.4.1.321.1.3012.1033
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmEnhanAlmCfgEntry

ncmEnhanAlmCfgEntry		1.3.6.1.4.1.321.1.3012.1033.1
An entry in the Enhanced ncm Alarm Configure table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmEnhanAlmCfgEntry

ncmEnhanAlmCfgNIDIndex		1.3.6.1.4.1.321.1.3012.1033.1.1
The object specifies the node id of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmEnhanAlmCfgIndex		1.3.6.1.4.1.321.1.3012.1033.1.2
The index value which uniquely identifies the interface to which this entry is applicable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmEnhanAlmCfgCRCThreshold		1.3.6.1.4.1.321.1.3012.1033.1.3
The variable specifies the consecutive CRC error threshold of the port; 0 is to disable this error threshold and 1~31 is to enable also specify a particular value for this threshold.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmEnhanAlmCfgSESThreshold		1.3.6.1.4.1.321.1.3012.1033.1.4
The variable specifies the severly errored seconds threshold of the port; 0 is to disable this error threshold and 1~100 is to enable also specify a particular value for this threshold.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmEnhanAlmCfgUASThreshold		1.3.6.1.4.1.321.1.3012.1033.1.5
The variable specifies the unavailable seconds threshold of the port; 0 is to disable this error threshold and 1~100 is to enable also specify a particular value for this threshold.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmEnhanAlmCfgBERThreshold		1.3.6.1.4.1.321.1.3012.1033.1.6
The variable specifies the bit error rate threshold of the port; the value = 10 Exponential to the power minus n.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), d10E-4(2), d10E-5(3), d10E-6(4), d10E-7(5), d10E-8(6), d10E-9(7)

ncmEnhanAlmCfgBPVThreshold		1.3.6.1.4.1.321.1.3012.1033.1.7
The object specifies the BPV threshold the port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmEnhanAlmCfgLineRestoral		1.3.6.1.4.1.321.1.3012.1033.1.8
The variable specifies the Line Restoral mode of the port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), automatic(2), manual(3), time-of-day(4)

ncmEnhanAlmCfgTODHour		1.3.6.1.4.1.321.1.3012.1033.1.9
The object specifies the Time of day hour the port; this is the hours to restore line if line restore is TOD.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmEnhanAlmCfgTODMinute		1.3.6.1.4.1.321.1.3012.1033.1.10
The object specifies the Time of day minute the port; this is the minutes to restore line if line restore is TOD.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmEnhanAlmCfgLinRestEvalPer		1.3.6.1.4.1.321.1.3012.1033.1.11
The object specifies the Line Restoral evaulation period (seconds) of the port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..ffff

ncmLoopbackTable		1.3.6.1.4.1.321.1.3012.1034
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmLoopbackEntry

ncmLoopbackEntry		1.3.6.1.4.1.321.1.3012.1034.1
An entry in the Loopback Table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmLoopbackEntry

ncmLpbkNIDIndex		1.3.6.1.4.1.321.1.3012.1034.1.1
The object specifies the node id of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmLpbkLineIndex		1.3.6.1.4.1.321.1.3012.1034.1.2
The index value which uniquely identifies the interface to which this entry is applicable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmSetAllOnes		1.3.6.1.4.1.321.1.3012.1034.1.3
The variable Enable/Disable the set all ones loopback option.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

ncmTimeoutLOCSec		1.3.6.1.4.1.321.1.3012.1034.1.4
The object specifies the number of seconds to loop for LOC. 0 for infinite.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..ffff

ncmRemoteLB		1.3.6.1.4.1.321.1.3012.1034.1.5
This object specify whether the loopback is remote or local.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmActivateDeactLBType		1.3.6.1.4.1.321.1.3012.1034.1.6
This variable represents the loopback confi- guration of the DS1 interface. Agents support- ing read/write access should return badValue in response to a requested loopback state that the interface does not support. The values mean: PayloadLoop The received signal at this interf is looped through the device. Typically the received signal is looped back for re- transmission after it has passed through the device's framing function. LineLoop The received signal at this interface does not go through the device (minimum pene- tration) but is looped back out. LocalLoopbk This variable indicates whether the local loopback is enabled or disabled on the port or line by the device. DPLoop This variable indicates whether the ncmData Port loopback is enabled or disabled by the device. Remark: Only ACE-T1/ACE-E1 cards use this loopbk type for port# 3 & 4; while the QUAD-T1/ QUAD-E1 don't support this loopback type. Act-LLBBOP This variable indicates to activate the LLBBOP. Act-PLBBOP This variable indicates to activate the PLBBOP. Deact-LLBBOP This variable indicates to deactivate the LLBBOP. Deact-PLBBOP This variable indicates to deactivate the PLBBOP. Deact-SIX-TWO-FOUR-ONE-ONE-INBAND This variable indicates to deactivate 62411 Inband Deact-FT1-LOOP-CODE This variable indicates to deactivate FT1 Loop Code When one of this object is chosen and received by the agent, this loopback type is send to the target platform to activate the loopback action; while the object value = 0 is received the loopback action will be deactivated by the loopback type stored inside the port status.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	deactivate(10000), lineLoop(1), payloadLoop(2), localLoopbk(4), dPLoop(8), act-LLBBOP(16), act-PLBBOP(32), aCT-SIX-TWO-FOUR-ONE-ONE-INBAND(64), aCT-FT1-LOOP-CODE(128), deact-LLBBOP(10016), deact-PLBBOP(10032), deact-SIX-TWO-FOUR-ONE-ONE-INBAND(10064), deact-FT1-LOOP-CODE(10128)

ncmTestPatternTable		1.3.6.1.4.1.321.1.3012.1035
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmTestPatternEntry

ncmTestPatternEntry		1.3.6.1.4.1.321.1.3012.1035.1
An entry in the Test Pattern Table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmTestPatternEntry

ncmTstpattNIDIndex		1.3.6.1.4.1.321.1.3012.1035.1.1
The object specifies the node id of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmTstpattLineIndex		1.3.6.1.4.1.321.1.3012.1035.1.2
The index value which uniquely identifies the interface to which this entry is applicable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmTstpattTestPeriod		1.3.6.1.4.1.321.1.3012.1035.1.3
The object specifies the number of seconds to test; 0 for infinite.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..ffff

ncmStartStopTestPattern		1.3.6.1.4.1.321.1.3012.1035.1.4
When one of this object is chosen and received by the agent, this test pattern is send to the target platform to start the diagnostic action; while object value = 0, it will stop the test pattern by the pattern is stored inside the port status. Remark: Only ACE-T1/ACE-E1 cards use the QRSS test pattern for data port# 3 & 4; while the QUAD-T1/QUAD-E1 don't support this test pattern.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	stop(100), three-In-Twentyfour(1), qrss(2), two-N-Twenty-One(3), one-In-Eight(4), two-N-Fifteen-One(5), all-Zeroes(6), fiftyfive-Octets(7), all-Ones(8)

ncmResetTestCounter		1.3.6.1.4.1.321.1.3012.1035.1.5
This object reset the test counter in the diagnostic.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	reset(1)

ncmCircuitInfoTable		1.3.6.1.4.1.321.1.3012.1036
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmCircuitInfoEntry

ncmCircuitInfoEntry		1.3.6.1.4.1.321.1.3012.1036.1
An entry in the circuitBuilder Table for adding, editing, deleting, activate, deactivate and get the detail information of a particular circuit.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmCircuitInfoEntry

ncmCircuitInfoNIDIndex		1.3.6.1.4.1.321.1.3012.1036.1.1
This variable indicates the node id value of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmCircuitInfoCircName		1.3.6.1.4.1.321.1.3012.1036.1.2
This object allocates & indicates the circuit name for sending the add/edit/delete/activate/deactivate/get detail info circuit request to the circuitbuilder.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..12)

ncmCircuitInfoCircPriority		1.3.6.1.4.1.321.1.3012.1036.1.3
This object allocates & indicates the circuit priority for sending the add/edit/get detail info circuit request to the circuitbuilder.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	ccb-CPRIO-LOW(1), ccb-CPRIO-NRML(2), ccb-CPRIO-HIGH(3), ccb-CPRIO-CRIT(4)

ncmCircuitInfoCircType		1.3.6.1.4.1.321.1.3012.1036.1.4
This object allocates & indicates the circuit type for sending the add/edit/get detail info circuit request to the circuitbuilder.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	ccb-CTYPE-RESERVED(1), ccb-CTYPE-PERMANENT(2), ccb-CTYPE-SWITCHED(3), ccb-CTYPE-PRIMARY(4), ccb-CTYPE-BACKUP(5), ccb-CTYPE-BACKUP-ND(6)

ncmCircuitInfoCircMode		1.3.6.1.4.1.321.1.3012.1036.1.5
This object allocates & indicates the circuit mode for sending the add/edit/get detail info circuit request to the circuitbuilder.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	ccb-CMODE-NX56-DATA(1), ccb-CMODE-NX64-DATA(2), ccb-CMODE-SIG-VOICE(3), ccb-CMODE-NSIG-VOICE(4), ccb-CMODE-RESERVED(5)

ncmCircuitInfoSrcPortSite		1.3.6.1.4.1.321.1.3012.1036.1.6
This object allocates & indicates the shelf and slot combination of the source port for sending the add/edit/get detail info circuit request to the circuitbuilder.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmCircuitInfoSrcCardEquipID		1.3.6.1.4.1.321.1.3012.1036.1.7
This object allocates & indicates the card equipment id of the source port for sending the add/edit/get detail info circuit request to the circuitbuilder.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	card-SIGMA-VCU(77), ace-FW-E1(80), ace-FW-T1(81), ace-FW-QUAD-T1(82), ace-FW-QUAD-E1(83), ace-Reserved(84), tabs-IMUX(85), ace-FW-DUAL-T1(86), ace-FW-DUAL-E1(87), fw-DS3-CDSU(88), fw-DS3-CDSU-CHANNEL(89), ace-FW-ISDN-T1(112), ace-FW-ISDN-E1(113), fw-DS3-DUDS3(116), fw-NCM(96)

ncmCircuitInfoSrcPortID		1.3.6.1.4.1.321.1.3012.1036.1.8
This object allocates & indicates the port identity of the source port for sending the add/edit/get detail info circuit request to the circuitbuilder.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	ccb-NET-PORT-1(1), ccb-NET-PORT-2(2), ccb-NET-PORT-3(3), ccb-NET-PORT-4(4), ccb-DATA-PORT-1(5), ccb-DATA-PORT-2(6), ccb-TAC-NET-PORT(7), ccb-TAC-EQP-PORT(8), ccb-UNKNOWN-PORT(9)

ncmCircuitInfoSrcTimeslotmap		1.3.6.1.4.1.321.1.3012.1036.1.9
This object allocates & indicates the timeslot map allocated for the source port for sending the add/edit/get detail info circuit request to the circuitbuilder.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmCircuitInfoDstPortSite		1.3.6.1.4.1.321.1.3012.1036.1.10
This object allocates & indicates the shelf and slot combination of the destination port for sending the add/edit/get detail info circuit request to the circuitbuilder.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmCircuitInfoDstCardEquipID		1.3.6.1.4.1.321.1.3012.1036.1.11
This object allocates & indicates the card equipment id of the destination port for sending the add/edit/get detail info circuit request to the circuitbuilder.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	card-SIGMA-VCU(77), ace-FW-E1(80), ace-FW-T1(81), ace-FW-QUAD-T1(82), ace-FW-QUAD-E1(83), ace-Reserved(84), tabs-IMUX(85), ace-FW-DUAL-T1(86), ace-FW-DUAL-E1(87), fw-DS3-CDSU(88), fw-DS3-CDSU-CHANNEL(89), ace-FW-ISDN-T1(112), ace-FW-ISDN-E1(113), fw-DS3-DUDS3(116), fw-NCM(96)

ncmCircuitInfoDstPortID		1.3.6.1.4.1.321.1.3012.1036.1.12
This object allocates & indicates the port identity of the destination port for sending the add/edit/get detail info circuit request to the circuitbuilder.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	ccb-NET-PORT-1(1), ccb-NET-PORT-2(2), ccb-NET-PORT-3(3), ccb-NET-PORT-4(4), ccb-DATA-PORT-1(5), ccb-DATA-PORT-2(6), ccb-TAC-NET-PORT(7), ccb-TAC-EQP-PORT(8), ccb-UNKNOWN-PORT(9)

ncmCircuitInfoDstTimeslotmap		1.3.6.1.4.1.321.1.3012.1036.1.13
This object allocates & indicates the timeslot map allocated for the destination port for sending the add/edit/get detail info circuit request to the circuitbuilder.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmCircuitInfoBackPlaneBusID		1.3.6.1.4.1.321.1.3012.1036.1.14
This object allocates & indicates the backplane bus ID for sending the add/edit/get detail info circuit request to the circuitbuilder.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	ccb-BKPL-BUS-A1(1), ccb-BKPL-BUS-A2(2), ccb-BKPL-BUS-A3(3), ccb-BKPL-BUS-A4(4), ccb-BKPL-BUS-A5(5), ccb-BKPL-BUS-A6(6), ccb-BKPL-BUS-A7(7), ccb-BKPL-BUS-A8(8), ccb-BKPL-BUS-B(9), ccb-BKPL-BUS-C(10), ccb-BKPL-BUS-NONE(11), ccb-BKPL-BUS-AUTO(12)

ncmCircuitInfoAssoCircName		1.3.6.1.4.1.321.1.3012.1036.1.15
This object allocates & indicates the Assoicate circuit name for sending the add/edit/get detail info circuit request to the circuitbuilder.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..12)

ncmCircuitInfoAction		1.3.6.1.4.1.321.1.3012.1036.1.16
The object send the corresponding acp command to execute the specified circuit action with all necessary parameters setup properly.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	add(1), edit(2), delete(3), activate(4), deactivate(5), getdetailinfo(6)

ncmAddEditActDeactCircuitStatus		1.3.6.1.4.1.321.1.3012.1036.1.17
This variable indicates the status as the result of add/edit/Activate/Deactivate circuit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ccb-BUILD-SUCCESS(1), ccb-BUILD-NO-PORT-BW(2), ccb-BUILD-CKT-EXIST(3), ccb-BUILD-INVALID-DATA(4), ccb-BUILD-PROM-FAILURE(5), ccb-BUILD-NO-BUS-BW(6), ccb-BUILD-NO-PEER-CARD(7), ccb-BUILD-PEER-NO-PORT-BW(8), ccb-BUILD-PEER-CKT-EXIST(9), ccb-BUILD-PEER-INVALID-DATA(10), ccb-BUILD-PEER-PROM-FAILURE(11), ccb-BUILD-PEER-NO-BUS-BW(12), ccb-BUILD-CIRCDBASE-OVRFLOW(13), ccb-BUILD-CKT-NOT-EXIST(14), ccb-BUILD-PORT-SETUP-FAIL(15), ccb-BUILD-CKT-INACTIVE(16), ccb-BUILD-NOT-ACT-CIRC(17), ccb-BUILD-SCHECK-OK(21), ccb-BUILD-SCHECK-BAD-CARD(22), ccb-BUILD-SCHECK-BAD-CTYPE(23), ccb-BUILD-SCHECK-BAD-CMODE(24), ccb-BUILD-SCHECK-DIFF-ncmSHELF(25), ccb-BUILD-SCHECK-DIFF-TSNUM(26), ccb-BUILD-SCHECK-BAD-BUS(27), ccb-BUILD-DCHECK-OK(31), ccb-BUILD-DCHECK-MISSCARD(32), ccb-BUILD-DCHECK-DIFFCARD(33), ccb-BUILD-DCHECK-BUS-TS-CNFL(34), ccb-BUILD-DCHECK-BUS-DRV-CNFL(35), ccb-BUILD-DCHECK-PORT-CNFL(36), ccb-BUILD-DBKCHECK-NO-PRICIRC(41), ccb-BUILD-DBKCHECK-NO-BKPCIRC(42), ccb-BUILD-DBKCHECK-NO-SHRPORT(43), ccb-BUILD-DBKCHECK-NO-PRIPORT(44)

ncmDeleteCircuitStatus		1.3.6.1.4.1.321.1.3012.1036.1.18
This variable indicates the status as the result of delete circuit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ccb-DELETE-SUCCESS(1), ccb-DELETE-PROM-FAILURE(2), ccb-DELETE-CANT-FIND(3), ccb-DELETE-NO-PEER-CARD(4), ccb-DELETE-PEER-PROM-FAILURE(5), ccb-DELETE-PEER-CANT-FIND(6), ccb-DELETE-CKT-NOT-EXIST(7)

ncmGetDetailCircuitStatus		1.3.6.1.4.1.321.1.3012.1036.1.19
This variable indicates the status of the get circuit detail information.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ccb-CSTAT-SPARE(1), ccb-CSTAT-EDITING(2), ccb-CSTAT-ACTIVE(3), ccb-CSTAT-INACTIVE(4), ccb-CSTAT-PREEMPTED(5), ccb-CSTAT-BROKEN(6), ccb-CSTAT-LINE-ERR(7), ccb-CSTAT-BACKUPPED(8)

ncmPortTimeslotAllocTable		1.3.6.1.4.1.321.1.3012.1037
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmPortTimeslotAllocEntry

ncmPortTimeslotAllocEntry		1.3.6.1.4.1.321.1.3012.1037.1
An entry in the Port Timeslot Allocation table for ncmCircuit Build.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmPortTimeslotAllocEntry

ncmPortTimeslotAllocNIDIndex		1.3.6.1.4.1.321.1.3012.1037.1.1
This variable indicates the node id value of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmPortTimeslotCardSite		1.3.6.1.4.1.321.1.3012.1037.1.2
This variable indicates the shelf and slot combination number of the device.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmPortTimeslotCardEquipID		1.3.6.1.4.1.321.1.3012.1037.1.3
This variable indicates the card equipment id of the target.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	card-SIGMA-VCU(77), ace-FW-E1(80), ace-FW-T1(81), ace-FW-QUAD-T1(82), ace-FW-QUAD-E1(83), ace-Reserved(84), tabs-IMUX(85), ace-FW-DUAL-T1(86), ace-FW-DUAL-E1(87), fw-DS3-CDSU(88), fw-DS3-CDSU-CHANNEL(89), ace-FW-ISDN-T1(112), ace-FW-ISDN-E1(113), fw-DS3-DUDS3(116), fw-NCM(96)

ncmPortTimeslotPortID		1.3.6.1.4.1.321.1.3012.1037.1.4
This variable indicates the port identity of the interface.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	ccb-NET-PORT-1(1), ccb-NET-PORT-2(2), ccb-NET-PORT-3(3), ccb-NET-PORT-4(4), ccb-DATA-PORT-1(5), ccb-DATA-PORT-2(6), ccb-TAC-NET-PORT(7), ccb-TAC-EQP-PORT(8), ccb-UNKNOWN-PORT(9)

ncmPortAllocTimeSlotMap		1.3.6.1.4.1.321.1.3012.1037.1.5
The variable indicates the timeslot map allocated for the port by sending the corresponding acp command to execute the Get Action.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmDialBkUpInfoTable		1.3.6.1.4.1.321.1.3012.1038
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmDialBkUpInfoEntry

ncmDialBkUpInfoEntry		1.3.6.1.4.1.321.1.3012.1038.1
An entry in the retrieval of dial-backup parameter table for ncmCircuit Build.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmDialBkUpInfoEntry

ncmDialBkUpInfoNIDIndex		1.3.6.1.4.1.321.1.3012.1038.1.1
This variable indicates the node id value of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmDialBkUpReqCircName		1.3.6.1.4.1.321.1.3012.1038.1.2
This variable indicates the circuit name for request dial-backup parameter and retrieve from the circuitbuilder.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..12)

ncmPrimaryCircName		1.3.6.1.4.1.321.1.3012.1038.1.3
This variable indicates the primary circuit name for request and retrieve from the circuitbuilder as a parameter of dial-backup.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..12)

ncmBackupCircName		1.3.6.1.4.1.321.1.3012.1038.1.4
This variable indicates the backup circuit name for request and retrieve from the circuitbuilder as a parameter of dial-backup.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..12)

ncmCallReferenceNumber		1.3.6.1.4.1.321.1.3012.1038.1.5
The variable indicates the call reference number of the dial-backup.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmCirSrcPortErrsetupMask		1.3.6.1.4.1.321.1.3012.1038.1.6
The variable indicates the bitmap to setup the mask for circuit source port error of the dial-backup; ncmAlarm Mask ALM-AIS, ALM-YEL and ALM-LOS are defined for t1 port; whilst ALM-CTS, ALM-DSR and ALM-DCD are defined for data port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	ccb-DBKP-ALM-AIS-CTS(1), ccb-DBKP-ALM-YEL-DSR(2), ccb-DBKP-ALM-LOS-DCD(4), ccb-DBKP-ALM-LOF(8), ccb-DBKP-ALM-UAS(16), ccb-DBKP-ALM-SES(32)

ncmCirDstPortErrsetupMask		1.3.6.1.4.1.321.1.3012.1038.1.7
The variable indicates the bitmap to setup the mask for circuit destination port error of the dial-backup; ncmAlarm Mask ALM-AIS, ALM-YEL and ALM-LOS are defined for t1 port; whilst ALM-CTS, ALM-DSR and ALM-DCD are defined for data port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	ccb-DBKP-ALM-AIS-CTS(1), ccb-DBKP-ALM-YEL-DSR(2), ccb-DBKP-ALM-LOS-DCD(4), ccb-DBKP-ALM-LOF(8), ccb-DBKP-ALM-UAS(16), ccb-DBKP-ALM-SES(32)

ncmCirErrClearanceMask		1.3.6.1.4.1.321.1.3012.1038.1.8
The variable indicates the bitmap to setup the mask for circuit error clearance of the dial-backup; ncmAlarm Mask ALM-AIS, ALM-YEL and ALM-LOS are defined for t1 port; whilst ALM-CTS, ALM-DSR and ALM-DCD are defined for data port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	ccb-DBKP-ALM-AIS-CTS(1), ccb-DBKP-ALM-YEL-DSR(2), ccb-DBKP-ALM-LOS-DCD(4), ccb-DBKP-ALM-LOF(8), ccb-DBKP-ALM-UAS(16), ccb-DBKP-ALM-SES(32)

ncmDialBkUpTimeout		1.3.6.1.4.1.321.1.3012.1038.1.9
The variable indicates the dial-backup timeout.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmDialBkUpAction		1.3.6.1.4.1.321.1.3012.1038.1.10
The object send the corresponding acp command to execute the dial-backup set action.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	set(1)

ncmDialBkUpSetupStatus		1.3.6.1.4.1.321.1.3012.1038.1.11
This variable indicates the setup status as the result of set dial-backup parameters.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ccb-BUILD-SUCCESS(1), ccb-BUILD-NO-PORT-BW(2), ccb-BUILD-CKT-EXIST(3), ccb-BUILD-INVALID-DATA(4), ccb-BUILD-PROM-FAILURE(5), ccb-BUILD-NO-BUS-BW(6), ccb-BUILD-NO-PEER-CARD(7), ccb-BUILD-PEER-NO-PORT-BW(8), ccb-BUILD-PEER-CKT-EXIST(9), ccb-BUILD-PEER-INVALID-DATA(10), ccb-BUILD-PEER-PROM-FAILURE(11), ccb-BUILD-PEER-NO-BUS-BW(12), ccb-BUILD-CIRCDBASE-OVRFLOW(13), ccb-BUILD-CKT-NOT-EXIST(14), ccb-BUILD-PORT-SETUP-FAIL(15), ccb-BUILD-CKT-INACTIVE(16), ccb-BUILD-NOT-ACT-CIRC(17), ccb-BUILD-SCHECK-OK(21), ccb-BUILD-SCHECK-BAD-CARD(22), ccb-BUILD-SCHECK-BAD-CTYPE(23), ccb-BUILD-SCHECK-BAD-CMODE(24), ccb-BUILD-SCHECK-DIFF-ncmSHELF(25), ccb-BUILD-SCHECK-DIFF-TSNUM(26), ccb-BUILD-SCHECK-BAD-BUS(27), ccb-BUILD-DCHECK-OK(31), ccb-BUILD-DCHECK-MISSCARD(32), ccb-BUILD-DCHECK-DIFFCARD(33), ccb-BUILD-DCHECK-BUS-TS-CNFL(34), ccb-BUILD-DCHECK-BUS-DRV-CNFL(35), ccb-BUILD-DCHECK-PORT-CNFL(36), ccb-BUILD-DBKCHECK-NO-PRICIRC(41), ccb-BUILD-DBKCHECK-NO-BKPCIRC(42), ccb-BUILD-DBKCHECK-NO-SHRPORT(43), ccb-BUILD-DBKCHECK-NO-PRIPORT(44)

ncmClearCircuitGrpTable		1.3.6.1.4.1.321.1.3012.1039
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmClearCircuitGrpEntry

ncmClearCircuitGrpEntry		1.3.6.1.4.1.321.1.3012.1039.1
An entry in the circuitBuilder Table for clearing any circuit group.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmClearCircuitGrpEntry

ncmClearCircuitGrpNIDIndex		1.3.6.1.4.1.321.1.3012.1039.1.1
This variable indicates the node id value of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmClearCircuitGrpName		1.3.6.1.4.1.321.1.3012.1039.1.2
This object allocates the circuit group site for the request.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	ccb-CDEL-ALL(1), ccb-CDEL-INACTIVE(2), ccb-CDEL-CARD-CKT(3), ccb-CDEL-PORT-CKT(4), ccb-CDEL-BUS-CKT(5)

ncmClearCircuitGrpSite		1.3.6.1.4.1.321.1.3012.1039.1.3
This object allocates the shelf and slot combination of the port for the request.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmClearCircuitCardEquipID		1.3.6.1.4.1.321.1.3012.1039.1.4
This object allocate the card equipment id for the request.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	card-SIGMA-VCU(77), ace-FW-E1(80), ace-FW-T1(81), ace-FW-QUAD-T1(82), ace-FW-QUAD-E1(83), ace-Reserved(84), tabs-IMUX(85), ace-FW-DUAL-T1(86), ace-FW-DUAL-E1(87), fw-DS3-CDSU(88), fw-DS3-CDSU-CHANNEL(89), ace-FW-ISDN-T1(112), ace-FW-ISDN-E1(113), fw-DS3-DUDS3(116), fw-NCM(96)

ncmClearCircuitPortID		1.3.6.1.4.1.321.1.3012.1039.1.5
This object allocates the port identity for the request.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	ccb-NET-PORT-1(1), ccb-NET-PORT-2(2), ccb-NET-PORT-3(3), ccb-NET-PORT-4(4), ccb-DATA-PORT-1(5), ccb-DATA-PORT-2(6), ccb-TAC-NET-PORT(7), ccb-TAC-EQP-PORT(8), ccb-UNKNOWN-PORT(9)

ncmClearCircuitAction		1.3.6.1.4.1.321.1.3012.1039.1.6
The object send the corresponding acp command to execute the clear circuit action.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	clear(1)

ncmListGetMsgNumTable		1.3.6.1.4.1.321.1.3012.1040
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmListGetMsgNumEntry

ncmListGetMsgNumEntry		1.3.6.1.4.1.321.1.3012.1040.1
An entry to retrieve circuit list in a particular page of the central ncmCircuit Build ncmDatabase.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmListGetMsgNumEntry

ncmListMsgNumNIDIndex		1.3.6.1.4.1.321.1.3012.1040.1.1
This variable indicates the node id value of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmListMsgNumCircuitGroup		1.3.6.1.4.1.321.1.3012.1040.1.2
ccb-CLIST-ALL: List all circuits in the central circuit database. ccb-CLIST-ACTIVE: List all active circuits in the circuit database. ccb-CLIST-PORT-CKT: List circuits associated with a port. ccb-CLIST-CARD-CKT: List circuits associated with a card. The variable indicates the constant for request to list which circuit group should be listed from the response.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	ccb-CLIST-ALL(1), ccb-CLIST-ACTIVE(2), ccb-CLIST-PORT-CKT(3), ccb-CLIST-CARD-CKT(4)

ncmListMsgNumPageNumber		1.3.6.1.4.1.321.1.3012.1040.1.3
The object allocates the page number for the retrival of ncmCircuit List request.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmListMsgNumCardSite		1.3.6.1.4.1.321.1.3012.1040.1.4
This object allocates the shelf and slot combination for the retrival of ncmCircuit List request.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmListMsgNumCardEquipID		1.3.6.1.4.1.321.1.3012.1040.1.5
This object defines the card equipment id of the target.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	card-SIGMA-VCU(77), ace-FW-E1(80), ace-FW-T1(81), ace-FW-QUAD-T1(82), ace-FW-QUAD-E1(83), ace-Reserved(84), tabs-IMUX(85), ace-FW-DUAL-T1(86), ace-FW-DUAL-E1(87), fw-DS3-CDSU(88), fw-DS3-CDSU-CHANNEL(89), ace-FW-ISDN-T1(112), ace-FW-ISDN-E1(113), fw-DS3-DUDS3(116), fw-NCM(96)

ncmListMsgNumPortID		1.3.6.1.4.1.321.1.3012.1040.1.6
This object defines the port identity of the interface.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	ccb-NET-PORT-1(1), ccb-NET-PORT-2(2), ccb-NET-PORT-3(3), ccb-NET-PORT-4(4), ccb-DATA-PORT-1(5), ccb-DATA-PORT-2(6), ccb-TAC-NET-PORT(7), ccb-TAC-EQP-PORT(8), ccb-UNKNOWN-PORT(9)

ncmNumofGetListMessage		1.3.6.1.4.1.321.1.3012.1040.1.7
This variable indicates number of circuits listed in this message.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmTotalCircDatabase		1.3.6.1.4.1.321.1.3012.1040.1.8
This variable indicates total number of circuits in circuit database.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmCircListccbTable		1.3.6.1.4.1.321.1.3012.1041
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmCircListccbEntry

ncmCircListccbEntry		1.3.6.1.4.1.321.1.3012.1041.1
An entry to retrieve the specified circuit detail information as listed out in the Get List Message Number MIB Group.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmCircListccbEntry

ncmListccbNIDIndex		1.3.6.1.4.1.321.1.3012.1041.1.1
This variable indicates the node id value of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmNumofCircListMessage		1.3.6.1.4.1.321.1.3012.1041.1.2
This variable indicates the number of circuit listed in this page.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmListccbCircName		1.3.6.1.4.1.321.1.3012.1041.1.3
This variable indicates the circuit name response from the circuitbuilder as the circuit identity of the object.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..12)

ncmListccbCircPriority		1.3.6.1.4.1.321.1.3012.1041.1.4
This variable indicates circuit priority of this circuit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ccb-CPRIO-LOW(1), ccb-CPRIO-NRML(2), ccb-CPRIO-HIGH(3), ccb-CPRIO-CRIT(4)

ncmListccbCircType		1.3.6.1.4.1.321.1.3012.1041.1.5
This variable indicates circuit type of this circuit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ccb-CTYPE-RESERVED(1), ccb-CTYPE-PERMANENT(2), ccb-CTYPE-SWITCHED(3), ccb-CTYPE-PRIMARY(4), ccb-CTYPE-BACKUP(5)

ncmListccbCircMode		1.3.6.1.4.1.321.1.3012.1041.1.6
This variable indicates circuit mode of this circuit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ccb-CMODE-NX56-DATA(1), ccb-CMODE-NX64-DATA(2), ccb-CMODE-SIG-VOICE(3), ccb-CMODE-NSIG-VOICE(4), ccb-CMODE-RESERVED(5)

ncmSrcPortSite		1.3.6.1.4.1.321.1.3012.1041.1.7
This variable indicates the shelf and slot combination of the source port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmSrcCardEquipID		1.3.6.1.4.1.321.1.3012.1041.1.8
This variable indicates the card equipment id of the source port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	card-SIGMA-VCU(77), ace-FW-E1(80), ace-FW-T1(81), ace-FW-QUAD-T1(82), ace-FW-QUAD-E1(83), ace-Reserved(84), tabs-IMUX(85), ace-FW-DUAL-T1(86), ace-FW-DUAL-E1(87), fw-DS3-CDSU(88), fw-DS3-CDSU-CHANNEL(89), ace-FW-ISDN-T1(112), ace-FW-ISDN-E1(113), fw-DS3-DUDS3(116), fw-NCM(96)

ncmSrcPortIdentifier		1.3.6.1.4.1.321.1.3012.1041.1.9
This variable indicates the port identity of the source port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ccb-NET-PORT-1(1), ccb-NET-PORT-2(2), ccb-NET-PORT-3(3), ccb-NET-PORT-4(4), ccb-DATA-PORT-1(5), ccb-DATA-PORT-2(6), ccb-TAC-NET-PORT(7), ccb-TAC-EQP-PORT(8), cb-UNKNOWN-PORT(9)

ncmSrcTimeslotmap		1.3.6.1.4.1.321.1.3012.1041.1.10
The variable indicates the timeslot map allocated for the source port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmDstPortSite		1.3.6.1.4.1.321.1.3012.1041.1.11
This variable indicates the shelf and slot combination of the destination port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmDstCardEquipID		1.3.6.1.4.1.321.1.3012.1041.1.12
This variable indicates the card equipment id of the destination port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	card-SIGMA-VCU(77), ace-FW-E1(80), ace-FW-T1(81), ace-FW-QUAD-T1(82), ace-FW-QUAD-E1(83), ace-Reserved(84), tabs-IMUX(85), ace-FW-DUAL-T1(86), ace-FW-DUAL-E1(87), fw-DS3-CDSU(88), fw-DS3-CDSU-CHANNEL(89), ace-FW-ISDN-T1(112), ace-FW-ISDN-E1(113), fw-DS3-DUDS3(116), fw-NCM(96)

ncmDstPortIdentifier		1.3.6.1.4.1.321.1.3012.1041.1.13
This variable indicates the port identity of the destination port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ccb-NET-PORT-1(1), ccb-NET-PORT-2(2), ccb-NET-PORT-3(3), ccb-NET-PORT-4(4), ccb-DATA-PORT-1(5), ccb-DATA-PORT-2(6), ccb-TAC-NET-PORT(7), ccb-TAC-EQP-PORT(8), cb-UNKNOWN-PORT(9)

ncmDstTimeslotmap		1.3.6.1.4.1.321.1.3012.1041.1.14
The variable indicates the timeslot map allocated for the destination port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmListccbBackPlaneBusID		1.3.6.1.4.1.321.1.3012.1041.1.15
The variable indicates the backplane bus ID of the device.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ccb-BKPL-BUS-A1(1), ccb-BKPL-BUS-A2(2), ccb-BKPL-BUS-A3(3), ccb-BKPL-BUS-A4(4), ccb-BKPL-BUS-A5(5), ccb-BKPL-BUS-A6(6), ccb-BKPL-BUS-A7(7), ccb-BKPL-BUS-A8(8), ccb-BKPL-BUS-B(9), ccb-BKPL-BUS-C(10), ccb-BKPL-BUS-NONE(11), ccb-BKPL-BUS-AUTO(12)

ncmListccbCircStatus		1.3.6.1.4.1.321.1.3012.1041.1.16
This variable indicates the status of the List circuit ccb.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ccb-CSTAT-SPARE(1), ccb-CSTAT-EDITING(2), ccb-CSTAT-ACTIVE(3), ccb-CSTAT-INACTIVE(4), ccb-CSTAT-PREEMPTED(5), ccb-CSTAT-BROKEN(6), ccb-CSTAT-LINE-ERR(7), ccb-CSTAT-BACKUPPED(8)

ncmEquipmentIDTable		1.3.6.1.4.1.321.1.3012.1042
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmEquipmentIDEntry

ncmEquipmentIDEntry		1.3.6.1.4.1.321.1.3012.1042.1
An entry in the Equipment ID table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmEquipmentIDEntry

ncmEquipmentIDNIDIndex		1.3.6.1.4.1.321.1.3012.1042.1.1
This variable specifies the node id.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmEquipmentIDLineIndex		1.3.6.1.4.1.321.1.3012.1042.1.2
This variable specifies the line index value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmFirmwareVersion		1.3.6.1.4.1.321.1.3012.1042.1.3
The variable specifies the firmware version.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmFirmwareRevision		1.3.6.1.4.1.321.1.3012.1042.1.4
The variable specifies the firmware revision.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmEquipmentType		1.3.6.1.4.1.321.1.3012.1042.1.5
The variable specifies the Equipment Type.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmHardwareVersion		1.3.6.1.4.1.321.1.3012.1042.1.6
The variable specifies the hardware version.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmHardwareRevision		1.3.6.1.4.1.321.1.3012.1042.1.7
The variable specifies the hardwareware revision.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmLocationID		1.3.6.1.4.1.321.1.3012.1042.1.8
The variable specifies the Location ID.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmE1AlarmThresholdConfigTable		1.3.6.1.4.1.321.1.3012.1043
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmE1AlarmThresholdConfigEntry

ncmE1AlarmThresholdConfigEntry		1.3.6.1.4.1.321.1.3012.1043.1
An entry in the E1 ncmAlarm Threshold Configure table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmE1AlarmThresholdConfigEntry

ncmE1AlarmThresholdConfigNIDIndex		1.3.6.1.4.1.321.1.3012.1043.1.1
The object specifies the node id of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmE1AlarmThresholdConfigIndex		1.3.6.1.4.1.321.1.3012.1043.1.2
The index value which uniquely identifies the interface to which this entry is applicable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmE1LOFThreshold		1.3.6.1.4.1.321.1.3012.1043.1.3
This variable specifies the LOF Threshold count in secs.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmE1LOFTimeInterval		1.3.6.1.4.1.321.1.3012.1043.1.4
This variable specifies the LOF Time Interval in secs.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmE1LOSThreshold		1.3.6.1.4.1.321.1.3012.1043.1.5
This variable specifies the LOS Threshold count in secs.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmE1LOSTimeInterval		1.3.6.1.4.1.321.1.3012.1043.1.6
This variable specifies the LOS Time Interval in secs.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmE1RAIThreshold		1.3.6.1.4.1.321.1.3012.1043.1.7
This variable specifies the RAI Threshold count in secs.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmE1RAITimeInterval		1.3.6.1.4.1.321.1.3012.1043.1.8
This variable specifies the RAI Time Interval in secs.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmE1AISThreshold		1.3.6.1.4.1.321.1.3012.1043.1.9
This variable specifies the AIS Threshold count in secs.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmE1AISTimeInterval		1.3.6.1.4.1.321.1.3012.1043.1.10
This variable specifies the AIS Time Interval in secs.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmE1BPVThreshold		1.3.6.1.4.1.321.1.3012.1043.1.11
This variable specifies the BPV Threshold count in secs.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmE1BPVTimeInterval		1.3.6.1.4.1.321.1.3012.1043.1.12
This variable specifies the BPV Time Interval in secs.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmE1ES15MINThreshold		1.3.6.1.4.1.321.1.3012.1043.1.13
This variable specifies the ES 15 minute Threshold count in secs.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmE1ES24HRThreshold		1.3.6.1.4.1.321.1.3012.1043.1.14
This variable specifies the ES 24 hour Threshold count in secs.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmE1SES15MINThreshold		1.3.6.1.4.1.321.1.3012.1043.1.15
This variable specifies the SES 15 minute Threshold count in secs.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmE1SES24HRThreshold		1.3.6.1.4.1.321.1.3012.1043.1.16
This variable specifies the SES 24 hour Threshold count in secs.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmCVP15MINThreshold		1.3.6.1.4.1.321.1.3012.1043.1.17
This variable specifies the CVP 15 minute Threshold count in secs.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmCVP24HRThreshold		1.3.6.1.4.1.321.1.3012.1043.1.18
This variable specifies the CVP 24 hour Threshold count in secs.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmCVL15MINThreshold		1.3.6.1.4.1.321.1.3012.1043.1.19
This variable specifies the CVL 15 minute Threshold count in secs.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmCVL24HRThreshold		1.3.6.1.4.1.321.1.3012.1043.1.20
This variable specifies the CVL 24 hour Threshold count in secs.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmESL15MINThreshold		1.3.6.1.4.1.321.1.3012.1043.1.21
This variable specifies the ESL 15 minute Threshold count in secs.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmESL24HRThreshold		1.3.6.1.4.1.321.1.3012.1043.1.22
This variable specifies the CVL 24 hour Threshold count in secs.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmSESL15MINThreshold		1.3.6.1.4.1.321.1.3012.1043.1.23
This variable specifies the SESL 15 minute Threshold count in secs.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmSESL24HRThreshold		1.3.6.1.4.1.321.1.3012.1043.1.24
This variable specifies the SESL 24 hour Threshold count in secs.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmUASP15MINThreshold		1.3.6.1.4.1.321.1.3012.1043.1.25
This variable specifies the UASP 15 minute Threshold count in secs.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmUASP24HRThreshold		1.3.6.1.4.1.321.1.3012.1043.1.26
This variable specifies the UASP 24 hour Threshold count in secs.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmE1AlarmThresholdStatusTable		1.3.6.1.4.1.321.1.3012.1044
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmE1AlarmThresholdStatusEntry

ncmE1AlarmThresholdStatusEntry		1.3.6.1.4.1.321.1.3012.1044.1
An entry in the E1 ncmAlarm Threshold Status table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmE1AlarmThresholdStatusEntry

ncmE1AlarmThresholdStatusNIDIndex		1.3.6.1.4.1.321.1.3012.1044.1.1
The object specifies the node id of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmE1AlarmThresholdStatusIndex		1.3.6.1.4.1.321.1.3012.1044.1.2
The index value which uniquely identifies the interface to which this entry is applicable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmLOFExceededE1		1.3.6.1.4.1.321.1.3012.1044.1.3
This variable specifies if LOF exceeded or not.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmLOSExceededE1		1.3.6.1.4.1.321.1.3012.1044.1.4
This variable specifies if LOS exceeded or not.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmRAIExceededE1		1.3.6.1.4.1.321.1.3012.1044.1.5
This variable specifies if RAI exceeded or not.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmAISExceededE1		1.3.6.1.4.1.321.1.3012.1044.1.6
This variable specifies if AIS exceeded or not.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmBPVExceededE1		1.3.6.1.4.1.321.1.3012.1044.1.7
This variable specifies if BPV exceeded or not.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmES15MINExceeded		1.3.6.1.4.1.321.1.3012.1044.1.8
This variable specifies if ES 15 minute exceeded or not.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmES24HRExceeded		1.3.6.1.4.1.321.1.3012.1044.1.9
This variable specifies if ES 24 Hour exceeded or not.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmSES15MINExceeded		1.3.6.1.4.1.321.1.3012.1044.1.10
This variable specifies if SES 15 minute exceeded or not.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmSES24HRExceeded		1.3.6.1.4.1.321.1.3012.1044.1.11
This variable specifies if SES 24 Hour exceeded or not.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmCVP15MINExceeded		1.3.6.1.4.1.321.1.3012.1044.1.12
This variable specifies if CVP 15 minute exceeded or not.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmCVP24HRExceeded		1.3.6.1.4.1.321.1.3012.1044.1.13
This variable specifies if CVP 24 Hour exceeded or not.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmCVL15MINExceeded		1.3.6.1.4.1.321.1.3012.1044.1.14
This variable specifies if CVL 15 minute exceeded or not.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmCVL24HRExceeded		1.3.6.1.4.1.321.1.3012.1044.1.15
This variable specifies if CVL 24 Hour exceeded or not.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmESL15MINExceeded		1.3.6.1.4.1.321.1.3012.1044.1.16
This variable specifies if ESL 15 minute exceeded or not.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmESL24HRExceeded		1.3.6.1.4.1.321.1.3012.1044.1.17
This variable specifies if ESL 24 Hour exceeded or not.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmSESL15MINExceeded		1.3.6.1.4.1.321.1.3012.1044.1.18
This variable specifies if SESL 15 minute exceeded or not.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmSESL24HRExceeded		1.3.6.1.4.1.321.1.3012.1044.1.19
This variable specifies if SESL 24 Hour exceeded or not.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmUASP15MINExceeded		1.3.6.1.4.1.321.1.3012.1044.1.20
This variable specifies if UASP 15 minute exceeded or not.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmUASP24HRExceeded		1.3.6.1.4.1.321.1.3012.1044.1.21
This variable specifies if UASP 24 Hour exceeded or not.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmLOFThresholdCount		1.3.6.1.4.1.321.1.3012.1044.1.22
This variable specifies the LOF Threshold Count in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmLOFTimeIntervals		1.3.6.1.4.1.321.1.3012.1044.1.23
This variable specifies the LOF Time Intervals in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmLOSThresholdCount		1.3.6.1.4.1.321.1.3012.1044.1.24
This variable specifies the LOS Threshold Count in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmLOSTimeIntervals		1.3.6.1.4.1.321.1.3012.1044.1.25
This variable specifies the LOS Time Intervals in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmRAIThresholdCount		1.3.6.1.4.1.321.1.3012.1044.1.26
This variable specifies the RAI Threshold Count in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmRAITimeIntervals		1.3.6.1.4.1.321.1.3012.1044.1.27
This variable specifies the RAI Time Intervals in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmAISThresholdCount		1.3.6.1.4.1.321.1.3012.1044.1.28
This variable specifies the AIS Threshold Count in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmAISTimeIntervals		1.3.6.1.4.1.321.1.3012.1044.1.29
This variable specifies the AIS Time Intervals in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmBPVThresholdCount		1.3.6.1.4.1.321.1.3012.1044.1.30
This variable specifies the BPV Threshold Count in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmBPVTimeIntervals		1.3.6.1.4.1.321.1.3012.1044.1.31
This variable specifies the BPV Time Intervals in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmES15MINThresholdCount		1.3.6.1.4.1.321.1.3012.1044.1.32
This variable specifies the ES 15MIN Threshold Count in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmES24HRThresholdCount		1.3.6.1.4.1.321.1.3012.1044.1.33
This variable specifies the ES 24HR Threshold Count in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmSES15MINThresholdCount		1.3.6.1.4.1.321.1.3012.1044.1.34
This variable specifies the SES 15MIN Threshold Count in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmSES24HRThresholdCount		1.3.6.1.4.1.321.1.3012.1044.1.35
This variable specifies the SES 24 HR Threshold Count in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmCVP15MINThresholdCount		1.3.6.1.4.1.321.1.3012.1044.1.36
This variable specifies the CVP 15MIN Threshold Count in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmCVP24HRThresholdCount		1.3.6.1.4.1.321.1.3012.1044.1.37
This variable specifies the CVP 24 HR Threshold Count in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmCVL15MINThresholdCount		1.3.6.1.4.1.321.1.3012.1044.1.38
This variable specifies the CVL 15MIN Threshold Count in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmCVL24HRThresholdCount		1.3.6.1.4.1.321.1.3012.1044.1.39
This variable specifies the CVL 24 HR Threshold Count in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmESL15MINThresholdCount		1.3.6.1.4.1.321.1.3012.1044.1.40
This variable specifies the ESL 15MIN Threshold Count in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmESL24HRThresholdCount		1.3.6.1.4.1.321.1.3012.1044.1.41
This variable specifies the ESL 24 HR Threshold Count in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmSESL15MINThresholdCount		1.3.6.1.4.1.321.1.3012.1044.1.42
This variable specifies the SESL 15MIN Threshold Count in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmSESL24HRThresholdCount		1.3.6.1.4.1.321.1.3012.1044.1.43
This variable specifies the SESL 24 HR Threshold Count in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmUASP15MINThresholdCount		1.3.6.1.4.1.321.1.3012.1044.1.44
This variable specifies the UASP 15MIN Threshold Count in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmUASP24HRThresholdCount		1.3.6.1.4.1.321.1.3012.1044.1.45
This variable specifies the UASP 24 HR Threshold Count in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmAlarmThresholdConfigTable		1.3.6.1.4.1.321.1.3012.1045
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmAlarmThresholdConfigEntry

ncmAlarmThresholdConfigEntry		1.3.6.1.4.1.321.1.3012.1045.1
An entry in the ncmAlarm Threshold Configure table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmAlarmThresholdConfigEntry

ncmAlarmThresholdConfigNIDIndex		1.3.6.1.4.1.321.1.3012.1045.1.1
The object specifies the node id of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmAlarmThresholdConfigIndex		1.3.6.1.4.1.321.1.3012.1045.1.2
The index value which uniquely identifies the interface to which this entry is applicable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmLOFThreshold		1.3.6.1.4.1.321.1.3012.1045.1.3
This variable the LOF Threshold count is seconds (1-86,400).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmLOFTimeInterval		1.3.6.1.4.1.321.1.3012.1045.1.4
This variable specifies the LOF Time Interval is seconds (1-86,400).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmLOSThreshold		1.3.6.1.4.1.321.1.3012.1045.1.5
This variable specifies the LOS Threshold count is seconds (1-86,400).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmLOSTimeInterval		1.3.6.1.4.1.321.1.3012.1045.1.6
This variable specifies the LOS Time Interval is seconds (1-86,400).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmRAIThreshold		1.3.6.1.4.1.321.1.3012.1045.1.7
This variable specifies the RAI Threshold count is seconds (1-86,400).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmRAITimeInterval		1.3.6.1.4.1.321.1.3012.1045.1.8
This variable specifies the RAI Time Interval is seconds (1-86,400).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmAISThreshold		1.3.6.1.4.1.321.1.3012.1045.1.9
This variable specifies the AIS Threshold count is seconds (1-86,400).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmAISTimeInterval		1.3.6.1.4.1.321.1.3012.1045.1.10
This variable specifies the AIS Time Interval is seconds (1-86,400).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmBPVThreshold		1.3.6.1.4.1.321.1.3012.1045.1.11
This variable specifies the BPV Threshold count is seconds (1-86,400).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmBPVTimeInterval		1.3.6.1.4.1.321.1.3012.1045.1.12
This variable specifies the BPV Time Interval is seconds (1-86,400).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmES15MINThreshold		1.3.6.1.4.1.321.1.3012.1045.1.13
This variable specifies the ES 15 minute Threshold count is seconds (1-86,400).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmES24HRThreshold		1.3.6.1.4.1.321.1.3012.1045.1.14
This variable specifies the ES 24 hour Threshold count in seconds (1-86,400).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmSES15MINThreshold		1.3.6.1.4.1.321.1.3012.1045.1.15
This variable specifies the SES 15 minute Threshold count is seconds (1-86,400).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmSES24HRThreshold		1.3.6.1.4.1.321.1.3012.1045.1.16
This variable specifies the SES 24 hour Threshold count in seconds (1-86,400).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmAlarmThresholdStatusTable		1.3.6.1.4.1.321.1.3012.1046
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmAlarmThresholdStatusEntry

ncmAlarmThresholdStatusEntry		1.3.6.1.4.1.321.1.3012.1046.1
An entry in the ncmAlarm Threshold Status table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmAlarmThresholdStatusEntry

ncmAlarmThresholdStatusNIDIndex		1.3.6.1.4.1.321.1.3012.1046.1.1
The object specifies the node id of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmAlarmThresholdStatusIndex		1.3.6.1.4.1.321.1.3012.1046.1.2
The index value which uniquely identifies the interface to which this entry is applicable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmLOFExceeded		1.3.6.1.4.1.321.1.3012.1046.1.3
This variable specifies if LOF exceeded or not.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmLOSExceeded		1.3.6.1.4.1.321.1.3012.1046.1.4
This variable specifies if LOS exceeded or not.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmAISExceeded		1.3.6.1.4.1.321.1.3012.1046.1.5
This variable specifies if AIS exceeded or not.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmRAIExceeded		1.3.6.1.4.1.321.1.3012.1046.1.6
This variable specifies if RAI exceeded or not.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmBPVExceeded		1.3.6.1.4.1.321.1.3012.1046.1.7
This variable specifies if BPV exceeded or not.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmESExceeded		1.3.6.1.4.1.321.1.3012.1046.1.8
This variable specifies if ES exceeded or not.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmSESExceeded		1.3.6.1.4.1.321.1.3012.1046.1.9
This variable specifies if SES exceeded or not.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ncmLOFThresholdCountst		1.3.6.1.4.1.321.1.3012.1046.1.10
This variable specifies the LOF Threshold Count in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmLOFTimeIntervalst		1.3.6.1.4.1.321.1.3012.1046.1.11
This variable specifies the LOF Time Intervals in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmLOSThresholdCountst		1.3.6.1.4.1.321.1.3012.1046.1.12
This variable specifies the LOS Threshold Count in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmLOSTimeIntervalst		1.3.6.1.4.1.321.1.3012.1046.1.13
This variable specifies the LOS Time Intervals in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmRAIThresholdCountst		1.3.6.1.4.1.321.1.3012.1046.1.14
This variable specifies the RAI Threshold Count in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmRAITimeIntervalst		1.3.6.1.4.1.321.1.3012.1046.1.15
This variable specifies the RAI Time Intervals in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmAISThresholdCountst		1.3.6.1.4.1.321.1.3012.1046.1.16
This variable specifies the AIS Threshold Count in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmAISTimeIntervalst		1.3.6.1.4.1.321.1.3012.1046.1.17
This variable specifies the AIS Time Intervals in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmBPVThresholdCountst		1.3.6.1.4.1.321.1.3012.1046.1.18
This variable specifies the BPV Threshold Count in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmBPVTimeIntervalst		1.3.6.1.4.1.321.1.3012.1046.1.19
This variable specifies the BPV Time Intervals in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmES15MINThresholdCountst		1.3.6.1.4.1.321.1.3012.1046.1.20
This variable specifies the ES 15 minute Threshold Count in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmES24HRThresholdCountst		1.3.6.1.4.1.321.1.3012.1046.1.21
This variable specifies the ES 24 Hour Count in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmSES15MINThresholdCountst		1.3.6.1.4.1.321.1.3012.1046.1.22
This variable specifies the SES 15 minute Threshold Count in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmSES24HRThresholdCountst		1.3.6.1.4.1.321.1.3012.1046.1.23
This variable specifies the SES 24 hour Count in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ncmResetAlmThresholdCount		1.3.6.1.4.1.321.1.3012.1046.1.24
This object reset the alarm threshold counter.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	reset(1)

ncmShelfSyncSourceSegTable		1.3.6.1.4.1.321.1.3012.1050
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NcmShelfSyncSourceSegEntry

ncmShelfSyncSourceSegEntry		1.3.6.1.4.1.321.1.3012.1050.1
An entry in the ncm Shelf Sync Source Segment Time table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NcmShelfSyncSourceSegEntry

ncmShelfSyncSegNIDIndex		1.3.6.1.4.1.321.1.3012.1050.1.1
This variable indicates the node id value of the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmShelfSyncSourceSegIndex		1.3.6.1.4.1.321.1.3012.1050.1.2
This object is the identifier of an Interface on a managed device. If there is an ifEntry that is directly associated with this and only this DS1 interface, it should have the same value as ifIndex. Otherwise, the value exceeds ifNumber, and is a unique identifier following this rule: inside interfaces (e.g., equipment side) with even numbers and outside interfaces (e.g., network side) with odd numbers.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmShelfSyncSourceSegNum		1.3.6.1.4.1.321.1.3012.1050.1.3
This variable indicates the segment index.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

ncmShelfTypeSeg		1.3.6.1.4.1.321.1.3012.1050.1.4
This variable indicates the shelf hardware type.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	uninstalled(1), dualLineShelf(2), multiLineShelf(3), nb-2200LineShelf(4), nb-2200-4ILineShelf(10), nb-2200QLineShelf(52), nb-2200-4IQLineShelf(54)

ncmRefBusSeg		1.3.6.1.4.1.321.1.3012.1050.1.5
This variable indicates the reference bus of the segment.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	c(1), a(2)

ncmSourceSegOneShelfNum		1.3.6.1.4.1.321.1.3012.1050.1.6
This variable indicates the source one shelf number of the segment.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmSourceSegOneCardNum		1.3.6.1.4.1.321.1.3012.1050.1.7
This variable indicates the source one card number of the segment.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmSourceSegOneClockRef		1.3.6.1.4.1.321.1.3012.1050.1.8
This variable indicates the source one clock reference of the segment.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	e1-t1port1(5), e1-t1port2(6), external-timing(7), internal-timing(8), quad-t1-port3(11), quad-t1-port4(12)

ncmSourceSegAutoRestore1		1.3.6.1.4.1.321.1.3012.1050.1.9
This variable indicates the source one auto restore of the segment.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

ncmSourceSegTwoShelfNum		1.3.6.1.4.1.321.1.3012.1050.1.10
This variable indicates the source two shelf number of the segment.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmSourceSegTwoCardNum		1.3.6.1.4.1.321.1.3012.1050.1.11
This variable indicates the source two card number of the segment.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmSourceSegTwoClockRef		1.3.6.1.4.1.321.1.3012.1050.1.12
This variable indicates the source two clock reference of the segment.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	e1-t1port1(5), e1-t1port2(6), external-timing(7), internal-timing(8), quad-t1-port3(11), quad-t1-port4(12)

ncmSourceSegAutoRestore2		1.3.6.1.4.1.321.1.3012.1050.1.13
This variable indicates the source two auto restore of the segment.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

ncmSourceSegThreeShelfNum		1.3.6.1.4.1.321.1.3012.1050.1.14
This variable indicates the source three shelf number of the segment.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmSourceSegThreeCardNum		1.3.6.1.4.1.321.1.3012.1050.1.15
This variable indicates the source three card number of the segment.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ncmSourceSegThreeClockRef		1.3.6.1.4.1.321.1.3012.1050.1.16
This variable indicates the source three clock reference of the segment.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	e1-t1port1(5), e1-t1port2(6), external-timing(7), internal-timing(8), quad-t1-port3(11), quad-t1-port4(12)

ncmSourceSegAutoRestore3		1.3.6.1.4.1.321.1.3012.1050.1.17
This variable indicates the source three auto restore of the segment.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

ncmShelfCurrentSyncSourceSeg		1.3.6.1.4.1.321.1.3012.1050.1.18
This variable indicates the current sync source of the segment.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	source1(1), source2(2), source3(3)