UsrUserMan-MIB

File: UsrUserMan-MIB.mib (49854 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB
USR-DEFINITIONS-MIB

Imported symbols

Counter IpAddress OBJECT-TYPE
DisplayString usrUserMan UsrUserName

Defined Types

UumEntry  
SEQUENCE    
  uumUserName UsrUserName
  uumStatus INTEGER
  uumUserPassword OCTET STRING
  uumServiceType INTEGER
  uumFramedProtocol INTEGER
  uumFramedIpAddress IpAddress
  uumFramedIpNetmask IpAddress
  uumFramedRouting INTEGER
  uumFilterIdInput OCTET STRING
  uumFramedMtu INTEGER
  uumFramedCompression INTEGER
  uumLoginIpHost IpAddress
  uumLoginService INTEGER
  uumLoginPort INTEGER
  uumReplyMessage OCTET STRING
  uumCallbackNumberOne OCTET STRING
  uumExpiration OCTET STRING
  uumFramedRoute OCTET STRING
  uumFramedIpxNetwork OCTET STRING
  uumSessionTimeout INTEGER
  uumIdleTimeout INTEGER
  uumBearerCapabilities INTEGER
  uumSpeedOfConnection INTEGER
  uumMaxChannels INTEGER
  uumChannelExpansion INTEGER
  uumChannelDecrement INTEGER
  uumExpansionAlgorithm INTEGER
  uumCompressionAlgorithm INTEGER
  uumReceiveAccMap INTEGER
  uumTransmitAccMap INTEGER
  uumWhereCompression INTEGER
  uumCompressionResetMode INTEGER
  uumMinCompressionSize INTEGER
  uumLocationType INTEGER
  uumIp INTEGER
  uumIpx INTEGER
  uumFilterZones INTEGER
  uumFilterIdOutput OCTET STRING
  uumAppletalk INTEGER
  uumBridging INTEGER
  uumSpoofing INTEGER
  uumHostType INTEGER
  uumSendName OCTET STRING
  uumSendPassword OCTET STRING
  uumStartTime OCTET STRING
  uumEndTime OCTET STRING
  uumSendScript1 OCTET STRING
  uumReplyScript1 OCTET STRING
  uumSendScript2 OCTET STRING
  uumReplyScript2 OCTET STRING
  uumSendScript3 OCTET STRING
  uumReplyScript3 OCTET STRING
  uumSendScript4 OCTET STRING
  uumReplyScript4 OCTET STRING
  uumSendScript5 OCTET STRING
  uumReplyScript5 OCTET STRING
  uumSendScript6 OCTET STRING
  uumReplyScript6 OCTET STRING
  uumTerminalType OCTET STRING
  uumAppletalkNetworkRange OCTET STRING
  uumLocalIpAddress IpAddress
  uumRoutingProtocol INTEGER
  uumCallbackNumberTwo OCTET STRING
  uumModemGroup OCTET STRING
  uumIpxRouting INTEGER
  uumIpxWan INTEGER
  uumIpRipSendDefault INTEGER
  uumIpRipSendRoutes INTEGER
  uumIpRipSendSubnets INTEGER
  uumIpRipAcceptDefault INTEGER
  uumIpRipSplitHorizon INTEGER
  uumIpRipPoisonReverse INTEGER
  uumIpRipFlashUpdate INTEGER
  uumIpRipV1Send INTEGER
  uumIpRipV1Receive INTEGER
  uumIpRipV2Receive INTEGER
  uumIpRipSilent INTEGER
  uumSimpleAuthPassword OCTET STRING
  uumIpDefaultRouteOption INTEGER
  uumIpPatOption INTEGER
  uumATMCategoryOfService INTEGER
  uumATMVpi INTEGER
  uumATMVci INTEGER
  uumATMPeakCellRate INTEGER
  uumATMSustainableCellRate INTEGER
  uumATMBurstTolerance INTEGER
  uumPatDefaultPrivAddr IpAddress
  uumIpSrcValidationOption INTEGER
  uumUserDesignation INTEGER
  uumATMVcType INTEGER
  uumOwnership INTEGER
  uumMacEncapsulatedRouting INTEGER
  uumIpIntelligentNat INTEGER
  uumIpDynamicAddrProto INTEGER
  uumMgmtIpAddress IpAddress
  uumMgmtIpNetmask IpAddress
  uumInternalCallToProto INTEGER

UumFramedRouteEntry  
SEQUENCE    
  uumFramedRouteUserName UsrUserName
  uumFramedRouteIpAddress IpAddress
  uumFramedRouteStatus INTEGER
  uumFramedRouteIpMask IpAddress
  uumFramedRouteIpGateway IpAddress
  uumFramedRouteIpMetric INTEGER

UumPatUdpPortEntry  
SEQUENCE    
  uumPatUdpPortName UsrUserName
  uumPatUdpStatus INTEGER
  uumPatUdpPublicPort INTEGER
  uumPatUdpPrivAddr IpAddress
  uumPatUdpPrivPort INTEGER

UumPatTcpPortEntry  
SEQUENCE    
  uumPatTcpPortName UsrUserName
  uumPatTcpStatus INTEGER
  uumPatTcpPublicPort INTEGER
  uumPatTcpPrivAddr IpAddress
  uumPatTcpPrivPort INTEGER

UumNatStatAddrEntry  
SEQUENCE    
  uumNatStatAddrName UsrUserName
  uumNatStatStatus INTEGER
  uumNatStatPublicAddr IpAddress
  uumNatStatPrivAddr IpAddress

UumNatDynAddrEntry  
SEQUENCE    
  uumNatDynAddrName UsrUserName
  uumNatDynStatus INTEGER
  uumNatDynPoolAddr IpAddress
  uumNatDynPoolCount INTEGER
  uumNatDynPoolMask IpAddress

UumIPXRouteEntry  
SEQUENCE    
  uumIPXRouteUserName UsrUserName
  uumIPXRouteAddress OCTET STRING
  uumIPXRouteStatus INTEGER
  uumIPXRouteMetric INTEGER
  uumIPXRouteTicks INTEGER

UumIpxServEntry  
SEQUENCE    
  uumIpxServUserName UsrUserName
  uumIpxServName OCTET STRING
  uumIpxServType INTEGER
  uumIpxServStatus INTEGER
  uumIpxServNetNum OCTET STRING
  uumIpxServNode OCTET STRING
  uumIpxServSocket INTEGER
  uumIpxServHopCount INTEGER

Defined Values

usrUserManGroup 2.4.1.429.4.2.1
OBJECT IDENTIFIER    

usrUserManRadiusIP 2.4.1.429.4.2.1.1
The IP address of the RADIUS server
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

usrUserManRadiusAltIP 2.4.1.429.4.2.1.2
The alternate IP address of the RADIUS server
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

usrUserManRadiusAcctIP 2.4.1.429.4.2.1.3
The IP address of the RADIUS accounting server
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

usrUserManRadiusAcctAltIP 2.4.1.429.4.2.1.4
The IP address of the RADIUS alternate accounting server
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

usrUserManLocalAuthSuccesses 2.4.1.429.4.2.1.5
The number of local authentication successes
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

usrUserManLocalAuthFails 2.4.1.429.4.2.1.6
The number of local authentication failures
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

usrUserManRadiusAuthSuccesses 2.4.1.429.4.2.1.7
The number of radius authentication successes
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

usrUserManRadiusAuthFails 2.4.1.429.4.2.1.8
The number of radius authentication failures
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

usrUserManLocalUsers 2.4.1.429.4.2.1.9
The number of local users
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

usrUserManActiveUsers 2.4.1.429.4.2.1.10
The number of active users
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

usrUserManRetransmissions 2.4.1.429.4.2.1.11
The number of udp packet retransmissions
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

usrUserManUdpReceives 2.4.1.429.4.2.1.12
The number of udp packets received
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

usrUserManRadiusRetrans 2.4.1.429.4.2.1.13
The maximum number of times a timeout will occur when communicating with radius
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

usrUserManRadiusTimeout 2.4.1.429.4.2.1.14
The maximum amount of time in seconds we will wait for a RADIUS response before retransmitting
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

usrUserManAcctRetrans 2.4.1.429.4.2.1.15
The maximum number of times a timeout will occur when communicating with radius accounting server
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

usrUserManAcctTimeout 2.4.1.429.4.2.1.16
The maximum amount of time in seconds we will wait for a RADIUS accounting response before retransmitting
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

usrUserManLocalAuth 2.4.1.429.4.2.1.17
Is local authentication on or off
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrUserManAcct 2.4.1.429.4.2.1.18
Is accounting on or off
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrUserManAcctServers 2.4.1.429.4.2.1.19
Do we want to consider both servers specified as primary
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER one(1), both(2)  

usrUserManRadiusAuth 2.4.1.429.4.2.1.20
Is radius authentication on or off
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

usrUserManStartAccountTime 2.4.1.429.4.2.1.21
When do we want to account from
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER connectionTime(1), authenticationTime(2)  

usrUserManSnmpAccess 2.4.1.429.4.2.1.22
Do we allow snmp to set our user table
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

usrUserManSaveUsers 2.4.1.429.4.2.1.23
If we hit the save flag the users will be saved to flash
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER normal(0), save(2)  

usrUserManRadiusSecret 2.4.1.429.4.2.1.24
The shared secret between the RADIUS server and pilgrim
Status: mandatory Access: write-only
OBJECT-TYPE    
  OCTET STRING Size(1..15)  

usrUserManTable 2.4.1.429.4.2.1.25
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UumEntry

uumEntry 2.4.1.429.4.2.1.25.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  UumEntry  

uumUserName 2.4.1.429.4.2.1.25.1.1
The users name
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  UsrUserName  

uumStatus 2.4.1.429.4.2.1.25.1.2
The status field for delete
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER delete(1), inactive(2), active(3), enabled(4), disabled(5), active-disabled(6)  

uumUserPassword 2.4.1.429.4.2.1.25.1.3
The users password
Status: mandatory Access: write-only
OBJECT-TYPE    
  OCTET STRING Size(1..15)  

uumServiceType 2.4.1.429.4.2.1.25.1.4
The bitmap indicating one or more types of user: login 0x1, framed 0x2, callback 0x4, dial-out 0x8, administrative 0x10
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uumFramedProtocol 2.4.1.429.4.2.1.25.1.5
The framed users protocol
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ppp(1), slip(2), arap(3), frame-relay(4), rfc-1483(5), pppllc(6), rfc-1490(7), pppoe-client(8), pppoeClientLLC(9)  

uumFramedIpAddress 2.4.1.429.4.2.1.25.1.6
The IP destination for the framed user
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

uumFramedIpNetmask 2.4.1.429.4.2.1.25.1.7
The destinations netmask
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

uumFramedRouting 2.4.1.429.4.2.1.25.1.8
The routing defined for a framed user
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(0), broadcastRoutingPackets(1), listenForRoutingPackets(2), broadcastAndListen(3)  

uumFilterIdInput 2.4.1.429.4.2.1.25.1.9
The input or output filter defined for the user
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..240)  

uumFramedMtu 2.4.1.429.4.2.1.25.1.10
The framed maximum transmission unit
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uumFramedCompression 2.4.1.429.4.2.1.25.1.11
The compression being used for the framed user
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(0), tcpIpCompression(1), ipxCompression(2)  

uumLoginIpHost 2.4.1.429.4.2.1.25.1.12
The IP destination for the login user
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

uumLoginService 2.4.1.429.4.2.1.25.1.13
The login user's protocol
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER telnet(0), rlogin(1), tcp(2), lat(4)  

uumLoginPort 2.4.1.429.4.2.1.25.1.14
The tcp port the user will use
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uumReplyMessage 2.4.1.429.4.2.1.25.1.15
The message to be displayed to the user
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..240)  

uumCallbackNumberOne 2.4.1.429.4.2.1.25.1.16
The first phone number configured for this user
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..240)  

uumExpiration 2.4.1.429.4.2.1.25.1.17
The users expiration date
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(11)  

uumFramedRoute 2.4.1.429.4.2.1.25.1.18
The framed route for the user
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..240)  

uumFramedIpxNetwork 2.4.1.429.4.2.1.25.1.19
The ipx network defined for the user
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

uumSessionTimeout 2.4.1.429.4.2.1.25.1.20
The amount of time in seconds before time out
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uumIdleTimeout 2.4.1.429.4.2.1.25.1.21
The amount of idle time in seconds before time out
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uumBearerCapabilities 2.4.1.429.4.2.1.25.1.22
The type of transmission
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER digital(1), analog(2)  

uumSpeedOfConnection 2.4.1.429.4.2.1.25.1.23
The speed of the connection
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), fifty-six-k(2), sixty-four-k(3), voice(4)  

uumMaxChannels 2.4.1.429.4.2.1.25.1.24
The maximum number of channels that may be used
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uumChannelExpansion 2.4.1.429.4.2.1.25.1.25
The percentage for channel expansion
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..100  

uumChannelDecrement 2.4.1.429.4.2.1.25.1.26
The percentage for channel decrement
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..100  

uumExpansionAlgorithm 2.4.1.429.4.2.1.25.1.27
The expansion algorithm being used
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER constant(1), linear(2)  

uumCompressionAlgorithm 2.4.1.429.4.2.1.25.1.28
The compression algorithm to be used
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(0), stac(1), ascend(2), microsoft(3), auto(4)  

uumReceiveAccMap 2.4.1.429.4.2.1.25.1.29
The receive acc mapping
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uumTransmitAccMap 2.4.1.429.4.2.1.25.1.30
The transmit acc mapping
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uumWhereCompression 2.4.1.429.4.2.1.25.1.31
The area where compression should be done
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER link(1), bundle(2)  

uumCompressionResetMode 2.4.1.429.4.2.1.25.1.32
The mode that the compression should be reset in
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), resetEveryPacket(2), resetEveryError(3)  

uumMinCompressionSize 2.4.1.429.4.2.1.25.1.33
The minimum size for compression
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uumLocationType 2.4.1.429.4.2.1.25.1.34
The type of location user
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER continuous(1), onDemand(2), manual(3), timed(4)  

uumIp 2.4.1.429.4.2.1.25.1.35
Ip enabled or disabled
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

uumIpx 2.4.1.429.4.2.1.25.1.36
Ipx enabled or disabled
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

uumFilterZones 2.4.1.429.4.2.1.25.1.37
Arap needed to define filter zones
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

uumFilterIdOutput 2.4.1.429.4.2.1.25.1.38
The output filter defined for the user
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..240)  

uumAppletalk 2.4.1.429.4.2.1.25.1.39
Appletalk enabled or disabled
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

uumBridging 2.4.1.429.4.2.1.25.1.40
Bridging enabled or disabled
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

uumSpoofing 2.4.1.429.4.2.1.25.1.41
Ipx spoofing enabled or disabled
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

uumHostType 2.4.1.429.4.2.1.25.1.42
The means for specifying a host for this user
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER prompt(1), default(2), specified(3)  

uumSendName 2.4.1.429.4.2.1.25.1.43
Name we use when challenged for authentication
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..240)  

uumSendPassword 2.4.1.429.4.2.1.25.1.44
Password we use when challenged for authentication
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..240)  

uumStartTime 2.4.1.429.4.2.1.25.1.45
Daily time we start timed location
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(11)  

uumEndTime 2.4.1.429.4.2.1.25.1.46
Daily time we stop timed location
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(11)  

uumSendScript1 2.4.1.429.4.2.1.25.1.47
The first send script for this dial-out user
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..240)  

uumReplyScript1 2.4.1.429.4.2.1.25.1.48
The first reply script for this dial-out user
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..240)  

uumSendScript2 2.4.1.429.4.2.1.25.1.49
The second send script for this dial-out user
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..240)  

uumReplyScript2 2.4.1.429.4.2.1.25.1.50
The second reply script for this dial-out user
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..240)  

uumSendScript3 2.4.1.429.4.2.1.25.1.51
The third send script for this dial-out user
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..240)  

uumReplyScript3 2.4.1.429.4.2.1.25.1.52
The third reply script for this dial-out user
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..240)  

uumSendScript4 2.4.1.429.4.2.1.25.1.53
The fourth send script for this dial-out user
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..240)  

uumReplyScript4 2.4.1.429.4.2.1.25.1.54
The fourth reply script for this dial-out user
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..240)  

uumSendScript5 2.4.1.429.4.2.1.25.1.55
The fifth send script for this dial-out user
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..240)  

uumReplyScript5 2.4.1.429.4.2.1.25.1.56
The fifth reply script for this dial-out user
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..240)  

uumSendScript6 2.4.1.429.4.2.1.25.1.57
The sixth send script for this dial-out user
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..240)  

uumReplyScript6 2.4.1.429.4.2.1.25.1.58
The sixth reply script for this dial-out user
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..240)  

uumTerminalType 2.4.1.429.4.2.1.25.1.59
The terminal type for the user
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..240)  

uumAppletalkNetworkRange 2.4.1.429.4.2.1.25.1.60
The appletalk network range for the user
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

uumLocalIpAddress 2.4.1.429.4.2.1.25.1.61
The local ip address configured for a dial-out user
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

uumRoutingProtocol 2.4.1.429.4.2.1.25.1.62
The routing protocol configured for a user
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER rip1(1), rip2(2)  

uumCallbackNumberTwo 2.4.1.429.4.2.1.25.1.63
The first phone number configured for this user
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..240)  

uumModemGroup 2.4.1.429.4.2.1.25.1.64
The modem group string for the user
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..240)  

uumIpxRouting 2.4.1.429.4.2.1.25.1.65
The ipx routing defined for a framed user
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(0), send(1), listen(2), respond(3), all(4)  

uumIpxWan 2.4.1.429.4.2.1.25.1.66
Is ipx wan enabled or disabled for the user
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

uumIpRipSendDefault 2.4.1.429.4.2.1.25.1.67
IP RIP flag
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

uumIpRipSendRoutes 2.4.1.429.4.2.1.25.1.68
IP RIP flag
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

uumIpRipSendSubnets 2.4.1.429.4.2.1.25.1.69
IP RIP flag
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

uumIpRipAcceptDefault 2.4.1.429.4.2.1.25.1.70
IP RIP flag
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

uumIpRipSplitHorizon 2.4.1.429.4.2.1.25.1.71
IP RIP flag
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

uumIpRipPoisonReverse 2.4.1.429.4.2.1.25.1.72
IP RIP flag
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

uumIpRipFlashUpdate 2.4.1.429.4.2.1.25.1.73
IP RIP flag
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

uumIpRipSimpleAuth 2.4.1.429.4.2.1.25.1.74
IP RIP flag
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

uumIpRipV1Send 2.4.1.429.4.2.1.25.1.75
IP RIP flag
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

uumIpRipV1Receive 2.4.1.429.4.2.1.25.1.76
IP RIP flag
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

uumIpRipV2Receive 2.4.1.429.4.2.1.25.1.77
IP RIP flag
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

uumIpRipSilent 2.4.1.429.4.2.1.25.1.78
IP RIP flag
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

uumSimpleAuthPassword 2.4.1.429.4.2.1.25.1.79
The IP RIP simple authentication password
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

uumIpDefaultRouteOption 2.4.1.429.4.2.1.25.1.80
If enable (1) a default route will be created using the remote users IP address. If disable (2) no such route is created.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

uumIpPatOption 2.4.1.429.4.2.1.25.1.81
Network Address Translation (NAT) option field. When NAT is enabled, the local LAN addresses are replaced with public recoginzed addresses when the frame traverses a WAN interface. A mapping between the public and private addresses is maintained while a connection/session remains active. Once the connection goes inactive or idle, the mapping is relinquished and the public address or port can be reused. Two types of NAT are supported, Port Address Translation (PAT) and the standard NAT (RFC 1631). With PAT, the mapping is maintained by the TCP and UDP port number. The private address is replaced with the public WAN interface address and the port number is replaced with a dynamically assigned public port number. With the standard NAT (RFC 1631), the private address is replaced with dynamically allocated public addresses taken from a configured address pool. Both PAT and NAT can be configured with static assignments.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER pat(1), nat(2), disable(3)  

uumATMCategoryOfService 2.4.1.429.4.2.1.25.1.82
The ATM category of service
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unspecified-bit-rate(1), variable-bit-rate(2), constant-bit-rate(3)  

uumATMVpi 2.4.1.429.4.2.1.25.1.83
The ATM Virtual Path Id
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uumATMVci 2.4.1.429.4.2.1.25.1.84
The ATM Virtual Channel Id
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uumATMPeakCellRate 2.4.1.429.4.2.1.25.1.85
The ATM Peak Cell Rate
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uumATMSustainableCellRate 2.4.1.429.4.2.1.25.1.86
The ATM Sustainable Cell Rate
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uumATMBurstTolerance 2.4.1.429.4.2.1.25.1.87
The ATM Burst Tolerance
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uumPatDefaultPrivAddr 2.4.1.429.4.2.1.25.1.88
When the NatOption is configured for PAT and a frame is received from the Public Net on a port which does not have a private address mapping, the frame will be mapped to the PatDefaultPrivAddr if it is configured. If the PatDefaultPrivAddr is not configured, 0.0.0.0, the frame will be discarded.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

uumIpSrcValidationOption 2.4.1.429.4.2.1.25.1.89
If enabled, the source address on incoming frames will be validated. If a route does not exist for the source address on the same interface on which the packet was received, the frame will be silently discarded. The default for this option is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

uumUserDesignation 2.4.1.429.4.2.1.25.1.90
The users designated type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unknown(1), internet(2), telecommuter(3)  

uumATMVcType 2.4.1.429.4.2.1.25.1.91
The type of vc (permanent or switched).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER pvc(1), svc(2)  

uumOwnership 2.4.1.429.4.2.1.25.1.92
To identify the VC created by auto provisionsing process or some other processes
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER autoProvision(1), notAutoProvision(2)  

uumMacEncapsulatedRouting 2.4.1.429.4.2.1.25.1.93
To identify that routed frames will be transmitted out the WAN ports prepended with a MAC header.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

uumIpIntelligentNat 2.4.1.429.4.2.1.25.1.94
Only applicable when uumIpPatOption is set to pat. When enabled and processing an incoming frame without an existing translation mapping, the client with the last access to the remote host will be chosen. If not found, the uumPatDefaultPrivAddr will be used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

uumIpDynamicAddrProto 2.4.1.429.4.2.1.25.1.95
Protocol used to dynamically learn the IP configuration when the network service is NOT PPP. Current options are DHCP and Inverse ARP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), dhcp(2), invarp(3)  

uumMgmtIpAddress 2.4.1.429.4.2.1.25.1.96
Management IP address. When configured, this address can be used to access the device and will be used as the source address by internal services.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

uumMgmtIpNetmask 2.4.1.429.4.2.1.25.1.97
The netmask of the Management Network, associated with the uumMgmtIpAddress
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

uumInternalCallToProto 2.4.1.429.4.2.1.25.1.98
Internal field used to specify which Protocol Handler CIP should call for this profile. VATM is the default.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER vatm(1), udp(2), l2tp(3)  

usrUserManCfmFileName 2.4.1.429.4.2.1.26
The name of the configuration file
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..32)  

usrUserManCfmSaveFlag 2.4.1.429.4.2.1.27
The Configuration File Manager Flag for saving user management scalars
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), save(2), saving(3), load(4), loading(5)  

usrUserManRadiusPort 2.4.1.429.4.2.1.28
The udp port the primary radius server listens at
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

usrUserManRadiusAltPort 2.4.1.429.4.2.1.29
The udp port the alternate radius server listens at
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

usrUserManRadiusAltSecret 2.4.1.429.4.2.1.30
The shared secret between the alternate RADIUS server and pilgrim
Status: mandatory Access: write-only
OBJECT-TYPE    
  OCTET STRING Size(1..15)  

usrUserManFramedRouteTable 2.4.1.429.4.2.1.31
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UumFramedRouteEntry

uumFramedRouteEntry 2.4.1.429.4.2.1.31.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  UumFramedRouteEntry  

uumFramedRouteUserName 2.4.1.429.4.2.1.31.1.1
The users name
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  UsrUserName  

uumFramedRouteIpAddress 2.4.1.429.4.2.1.31.1.2
The framed routing ip address for the user
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

uumFramedRouteStatus 2.4.1.429.4.2.1.31.1.3
The status field for the framed route
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER delete(1), add(2)  

uumFramedRouteIpMask 2.4.1.429.4.2.1.31.1.4
The framed routing ip mask for the user
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

uumFramedRouteIpGateway 2.4.1.429.4.2.1.31.1.5
The framed routing ip gateway for the user
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

uumFramedRouteIpMetric 2.4.1.429.4.2.1.31.1.6
The framed routing ip metric for the user
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

usrUserManPatUdpTable 2.4.1.429.4.2.1.32
Static entries that map a UDP port number to a local/private IP address/port. Each entry defines a service and the corresponding private Server.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UumPatUdpPortEntry

uumPatUdpPortEntry 2.4.1.429.4.2.1.32.1
A static entry that map a UDP port number to a local/private IP address/port. Defines a service and the corresponding private Server.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  UumPatUdpPortEntry  

uumPatUdpPortName 2.4.1.429.4.2.1.32.1.1
The users name
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  UsrUserName  

uumPatUdpStatus 2.4.1.429.4.2.1.32.1.2
The status field for the UDP Port Entry
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER delete(1), add(2)  

uumPatUdpPublicPort 2.4.1.429.4.2.1.32.1.3
Public Port corresponding to a Private Address/Port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uumPatUdpPrivAddr 2.4.1.429.4.2.1.32.1.4
Private Address corresponding to a Public Port number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

uumPatUdpPrivPort 2.4.1.429.4.2.1.32.1.5
Private Port corresponding to a Public Port number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

usrUserManPatTcpTable 2.4.1.429.4.2.1.33
Static entries that map a TCP port number to a local/private IP address/port. Each entry defines a service and the corresponding private Server.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UumPatTcpPortEntry

uumPatTcpPortEntry 2.4.1.429.4.2.1.33.1
A static entry that map a TCP port number to a local/private IP address/port. Defines a service and the corresponding private Server.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  UumPatTcpPortEntry  

uumPatTcpPortName 2.4.1.429.4.2.1.33.1.1
The users name
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  UsrUserName  

uumPatTcpStatus 2.4.1.429.4.2.1.33.1.2
The status field for the TCP Port Entry
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER delete(1), add(2)  

uumPatTcpPublicPort 2.4.1.429.4.2.1.33.1.3
Public TCP Port corresponding to a Private Address/Port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uumPatTcpPrivAddr 2.4.1.429.4.2.1.33.1.4
Private Address corresponding to a Public Port number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

uumPatTcpPrivPort 2.4.1.429.4.2.1.33.1.5
Private Port corresponding to a Public Port number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uumNatStatAddrTable 2.4.1.429.4.2.1.34
The static IP addresses map a Public IP address to a local/ non-public address. No port translation is done for static defined addresses.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UumNatStatAddrEntry

uumNatStatAddrEntry 2.4.1.429.4.2.1.34.1
The static IP addresses map a Public IP address to a local/ non-public address. No port translation is done for static defined addresses.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  UumNatStatAddrEntry  

uumNatStatAddrName 2.4.1.429.4.2.1.34.1.1
The name of a NAT translation entry. When NAT is enabled for a user profile, the profile will contain a name which matches the NAT translation entry name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  UsrUserName  

uumNatStatStatus 2.4.1.429.4.2.1.34.1.2
The status field for the NAT Static Entry
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER delete(1), add(2)  

uumNatStatPublicAddr 2.4.1.429.4.2.1.34.1.3
Public Address corresponding to a Private Address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

uumNatStatPrivAddr 2.4.1.429.4.2.1.34.1.4
Private Address corresponding to a Public Address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

uumNatDynAddrTable 2.4.1.429.4.2.1.35
A table of public address pools. A public address is allocated from the pool when a frame traverses a WAN interface with NAT enabled. The public address remains mapped to the private address while there are TCP and UDP connections/conversations that are active.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UumNatDynAddrEntry

uumNatDynAddrEntry 2.4.1.429.4.2.1.35.1
An entry for a public address pool. A public address is allocated from the pool when a frame traverses a WAN interface with NAT enabled. The public address remains mapped to the private address while there are TCP and UDP connections/conversations that are active. The pool is specified with a start address and the number of addresses in the pool
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  UumNatDynAddrEntry  

uumNatDynAddrName 2.4.1.429.4.2.1.35.1.1
The name of a NAT translation entry. When NAT is enabled for a user profile, the profile will contain a name which matches the NAT translation entry name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  UsrUserName  

uumNatDynStatus 2.4.1.429.4.2.1.35.1.2
The status field for the NAT Dynamic Entry
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER delete(1), add(2)  

uumNatDynPoolAddr 2.4.1.429.4.2.1.35.1.3
NAT Dynamic Pool start address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

uumNatDynPoolCount 2.4.1.429.4.2.1.35.1.4
The number of addresses in the NAT Dynamic pool.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uumNatDynPoolMask 2.4.1.429.4.2.1.35.1.5
NAT Dynamic Pool ip mask. Defaults to the IP address class (e.g. Class C). This mask is used in the Routing Messages (RIP) to advertise routes for the specified Pool.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

usrUserManIPXRouteTable 2.4.1.429.4.2.1.36
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UumIPXRouteEntry

uumIPXRouteEntry 2.4.1.429.4.2.1.36.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  UumIPXRouteEntry  

uumIPXRouteUserName 2.4.1.429.4.2.1.36.1.1
The users name
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  UsrUserName  

uumIPXRouteAddress 2.4.1.429.4.2.1.36.1.2
The framed routing entry's destination ipx address.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(4)  

uumIPXRouteStatus 2.4.1.429.4.2.1.36.1.3
The status field for the framed route
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER delete(1), add(2)  

uumIPXRouteMetric 2.4.1.429.4.2.1.36.1.4
The number of router hops necessary to reach the destination.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uumIPXRouteTicks 2.4.1.429.4.2.1.36.1.5
The delay, in ticks, to reach the route's destination.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

usrUserManIPXServTable 2.4.1.429.4.2.1.37
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UumIpxServEntry

uumIpxServEntry 2.4.1.429.4.2.1.37.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  UumIpxServEntry  

uumIpxServUserName 2.4.1.429.4.2.1.37.1.1
The users name
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  UsrUserName  

uumIpxServName 2.4.1.429.4.2.1.37.1.2
The service name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..48)  

uumIpxServType 2.4.1.429.4.2.1.37.1.3
The service type(e.g. FileServer = 4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uumIpxServStatus 2.4.1.429.4.2.1.37.1.4
The status field for the framed route
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER delete(1), add(2)  

uumIpxServNetNum 2.4.1.429.4.2.1.37.1.5
The IPX network number portion of the IPX address of the service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

uumIpxServNode 2.4.1.429.4.2.1.37.1.6
The node portion of the IPX address of the service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(6)  

uumIpxServSocket 2.4.1.429.4.2.1.37.1.7
The socket portion of the IPX address of the service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uumIpxServHopCount 2.4.1.429.4.2.1.37.1.8
The number of router hops to the server on which the service resides.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER