Unisphere-Data-ISIS-MIB

File: Unisphere-Data-ISIS-MIB.mib (97399 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF IF-MIB
SNMPv2-TC Unisphere-Data-MIBs

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
Counter32 IpAddress MODULE-COMPLIANCE
OBJECT-GROUP InterfaceIndexOrZero TEXTUAL-CONVENTION
DisplayString RowStatus TruthValue
usDataMibs

Defined Types

OSINSAddress  
OSI Network Service Address, e.g. NSAP, Network Entity Title
TEXTUAL-CONVENTION    
  OCTET STRING Size(0..20)  

SystemID  
A system ID.
TEXTUAL-CONVENTION    
  OCTET STRING Size(0..8)  

OperState  
Type used in enabling and disabling a row.
TEXTUAL-CONVENTION    
  INTEGER off(1), on(2)  

AuthTime  
Then number of seconds since Jan. 1 1970.
TEXTUAL-CONVENTION    
  Integer32  

LSPBuffSize  
Integer sub range for LSP size.
TEXTUAL-CONVENTION    
  Integer32 512..9180  

LevelState  
States of the ISIS protocol.
TEXTUAL-CONVENTION    
  INTEGER off(1), on(2), waiting(3)  

SupportedProtocol  
Types of network protocol supported by Integrated ISIS. The values for ISO8473 and IP are those registered for these protocols in ISO TR9577.
TEXTUAL-CONVENTION    
  INTEGER iso8473(129), ip(204), ipV6(205)  

UsdDefaultMetric  
Integer sub-range for default metric for single hop. The value is truncated to 63 when the usdIsisSysL1MetricStyle or usdIsisSysL2MetricStyle is set to usdIsisMetricStyleNarrow
TEXTUAL-CONVENTION    
  Integer32 1..16777214  

OtherMetric  
Integer sub-range for metrics other than the default metric for single hop.
TEXTUAL-CONVENTION    
  Integer32 0..63  

CircuitID  
ID for a circuit.
TEXTUAL-CONVENTION    
  OCTET STRING Size(2..9)  

ISPriority  
Integer sub-range for ISIS priority.
TEXTUAL-CONVENTION    
  Integer32 1..127  

UsdIsisSysEntry  
SEQUENCE    
  usdIsisSysInstance Integer32
  usdIsisSysVersion DisplayString
  usdIsisSysType INTEGER
  usdIsisSysID SystemID
  usdIsisSysMaxPathSplits Integer32
  usdIsisSysMaxLSPGenInt Integer32
  usdIsisSysOrigL1LSPBuffSize LSPBuffSize
  usdIsisSysMaxAreaAddresses Integer32
  usdIsisSysMinL1LSPGenInt Integer32
  usdIsisSysMinL2LSPGenInt Integer32
  usdIsisSysPollESHelloRate Integer32
  usdIsisSysWaitTime Integer32
  usdIsisSysOperState OperState
  usdIsisSysL1State LevelState
  usdIsisSysCorrLSPs Counter32
  usdIsisSysLSPL1DbaseOloads Counter32
  usdIsisSysManAddrDropFromAreas Counter32
  usdIsisSysAttmptToExMaxSeqNums Counter32
  usdIsisSysSeqNumSkips Counter32
  usdIsisSysOwnLSPPurges Counter32
  usdIsisSysIDFieldLenMismatches Counter32
  usdIsisSysMaxAreaAddrMismatches Counter32
  usdIsisSysOrigL2LSPBuffSize LSPBuffSize
  usdIsisSysL2State LevelState
  usdIsisSysLSPL2DbaseOloads Counter32
  usdIsisSysAuthFails Counter32
  usdIsisSysLSPIgnoreErrors TruthValue
  usdIsisSysMaxAreaCheck TruthValue
  usdIsisSysSetOverloadBit TruthValue
  usdIsisSysSetOverloadBitStartupDuration Integer32
  usdIsisSysMaxLspLifetime Integer32
  usdIsisSysL1SpfInterval Integer32
  usdIsisSysL2SpfInterval Integer32
  usdIsisSysIshHoldTime Integer32
  usdIsisSysIshConfigTimer Integer32
  usdIsisSysDistributeDomainWide TruthValue
  usdIsisSysDistance Integer32
  usdIsisSysL1MetricStyle INTEGER
  usdIsisSysL2MetricStyle INTEGER
  usdIsisSysIsoRouteTag OCTET STRING
  usdIsisSysMplsTeLevel INTEGER
  usdIsisSysMplsTeRtrIdIfIndex InterfaceIndexOrZero

UsdIsisManAreaAddrEntry  
SEQUENCE    
  usdIsisManAreaAddrSysInstance Integer32
  usdIsisManAreaAddr OSINSAddress
  usdIsisManAreaAddrRowStatus RowStatus

UsdIsisSysProtSuppEntry  
SEQUENCE    
  usdIsisSysProtSuppSysInstance Integer32
  usdIsisSysProtSuppProtocol SupportedProtocol
  usdIsisSysProtSuppRowStatus RowStatus

UsdIsisSummAddrEntry  
SEQUENCE    
  usdIsisSummAddrSysInstance Integer32
  usdIsisSummAddress IpAddress
  usdIsisSummAddrMask IpAddress
  usdIsisSummAddrRowStatus RowStatus
  usdIsisSummAddrOperState OperState
  usdIsisSummAddrDefaultMetric Integer32
  usdIsisSummAddrDelayMetric OtherMetric
  usdIsisSummAddrExpenseMetric OtherMetric
  usdIsisSummAddrErrorMetric OtherMetric
  usdIsisSummLevel INTEGER

UsdIsisCircEntry  
SEQUENCE    
  usdIsisCircSysInstance Integer32
  usdIsisCircIfIndex Integer32
  usdIsisCircLocalID Integer32
  usdIsisCircOperState OperState
  usdIsisCircRowStatus RowStatus
  usdIsisCircType INTEGER
  usdIsisCircL1DefaultMetric UsdDefaultMetric
  usdIsisCircL1DelayMetric OtherMetric
  usdIsisCircL1ExpenseMetric OtherMetric
  usdIsisCircL1ErrorMetric OtherMetric
  usdIsisCircExtDomain TruthValue
  usdIsisCircAdjChanges Counter32
  usdIsisCircInitFails Counter32
  usdIsisCircRejAdjs Counter32
  usdIsisCircOutCtrlPDUs Counter32
  usdIsisCircInCtrlPDUs Counter32
  usdIsisCircIDFieldLenMismatches Counter32
  usdIsisCircL2DefaultMetric UsdDefaultMetric
  usdIsisCircL2DelayMetric OtherMetric
  usdIsisCircL2ExpenseMetric OtherMetric
  usdIsisCircL2ErrorMetric OtherMetric
  usdIsisCircManL2Only TruthValue
  usdIsisCircL1ISPriority ISPriority
  usdIsisCircL1CircID CircuitID
  usdIsisCircL1DesIS SystemID
  usdIsisCircLANL1DesISChanges Counter32
  usdIsisCircL2ISPriority ISPriority
  usdIsisCircL2CircID CircuitID
  usdIsisCircL2DesIS SystemID
  usdIsisCircLANL2DesISChanges Counter32
  usdIsisCircMCAddr INTEGER
  usdIsisCircPtToPtCircID CircuitID
  usdIsisCircL1HelloTimer Integer32
  usdIsisCircL2HelloTimer Integer32
  usdIsisCircL1HelloMultiplier Integer32
  usdIsisCircL2HelloMultiplier Integer32
  usdIsisCircMinLSPTransInt Integer32
  usdIsisCircMinLSPReTransInt Integer32
  usdIsisCircL1CSNPInterval Integer32
  usdIsisCircL2CSNPInterval Integer32
  usdIsisCircLSPThrottle Integer32
  usdIsisCircMeshGroupEnabled INTEGER
  usdIsisCircMeshGroup Integer32
  usdIsisCircLevel INTEGER
  usdIsisCircState INTEGER

UsdIsisSysHostNameEntry  
SEQUENCE    
  usdIsisSysHostNameSysInstance Integer32
  usdIsisSysHostNameSysId SystemID
  usdIsisSysHostNameAreaAddr OSINSAddress
  usdIsisSysHostNameName OCTET STRING
  usdIsisSysHostNameType INTEGER
  usdIsisSysHostNameRowStatus RowStatus

UsdIsisSysAreaAuthenticationEntry  
SEQUENCE    
  usdIsisSysAreaAuthenticationSysInstance Integer32
  usdIsisSysAreaAuthenticationKeyId Integer32
  usdIsisSysAreaAuthenticationPwd OCTET STRING
  usdIsisSysAreaAuthenticationKeyType INTEGER
  usdIsisSysAreaAuthenticationStartAcceptTime AuthTime
  usdIsisSysAreaAuthenticationStartGenerateTime AuthTime
  usdIsisSysAreaAuthenticationStopAcceptTime AuthTime
  usdIsisSysAreaAuthenticationStopGenerateTime AuthTime
  usdIsisSysAreaAuthenticationRowStatus RowStatus

UsdIsisSysDomainAuthenticationEntry  
SEQUENCE    
  usdIsisSysDomainAuthenticationSysInstance Integer32
  usdIsisSysDomainAuthenticationKeyId Integer32
  usdIsisSysDomainAuthenticationPwd OCTET STRING
  usdIsisSysDomainAuthenticationKeyType INTEGER
  usdIsisSysDomainAuthenticationStartAcceptTime AuthTime
  usdIsisSysDomainAuthenticationStartGenerateTime AuthTime
  usdIsisSysDomainAuthenticationStopAcceptTime AuthTime
  usdIsisSysDomainAuthenticationStopGenerateTime AuthTime
  usdIsisSysDomainAuthenticationRowStatus RowStatus

UsdIsisSysL1CircAuthenticationEntry  
SEQUENCE    
  usdIsisSysL1CircAuthenticationSysInstance Integer32
  usdIsisSysL1CircAuthenticationIfIndex Integer32
  usdIsisSysL1CircAuthenticationKeyId Integer32
  usdIsisSysL1CircAuthenticationPwd OCTET STRING
  usdIsisSysL1CircAuthenticationKeyType INTEGER
  usdIsisSysL1CircAuthenticationStartAcceptTime AuthTime
  usdIsisSysL1CircAuthenticationStartGenerateTime AuthTime
  usdIsisSysL1CircAuthenticationStopAcceptTime AuthTime
  usdIsisSysL1CircAuthenticationStopGenerateTime AuthTime
  usdIsisSysL1CircAuthenticationRowStatus RowStatus

UsdIsisSysL2CircAuthenticationEntry  
SEQUENCE    
  usdIsisSysL2CircAuthenticationSysInstance Integer32
  usdIsisSysL2CircAuthenticationIfIndex Integer32
  usdIsisSysL2CircAuthenticationKeyId Integer32
  usdIsisSysL2CircAuthenticationPwd OCTET STRING
  usdIsisSysL2CircAuthenticationKeyType INTEGER
  usdIsisSysL2CircAuthenticationStartAcceptTime AuthTime
  usdIsisSysL2CircAuthenticationStartGenerateTime AuthTime
  usdIsisSysL2CircAuthenticationStopAcceptTime AuthTime
  usdIsisSysL2CircAuthenticationStopGenerateTime AuthTime
  usdIsisSysL2CircAuthenticationRowStatus RowStatus

Defined Values

usdIsisMIB 1.3.6.1.4.1.4874.2.2.38
The intermediate system to intermediate system (IS-IS) routing protocol MIB for Unisphere Networks routing switch products. This MIB provides objects for management of the IS-IS Routing protocol, as described in ISO 10589, when it is used to construct routing tables for IP networks, as described in RFC 1195.
MODULE-IDENTITY    

usdIsisObjects 1.3.6.1.4.1.4874.2.2.38.1
OBJECT IDENTIFIER    

usdIsisTrapGroup 1.3.6.1.4.1.4874.2.2.38.2
OBJECT IDENTIFIER    

usdIsisConformance 1.3.6.1.4.1.4874.2.2.38.3
OBJECT IDENTIFIER    

usdIsisSystemGroup 1.3.6.1.4.1.4874.2.2.38.1.1
OBJECT IDENTIFIER    

usdIsisCircuitGroup 1.3.6.1.4.1.4874.2.2.38.1.2
OBJECT IDENTIFIER    

usdIsisSysTable 1.3.6.1.4.1.4874.2.2.38.1.1.1
The set of instances of the Integrated IS-IS protocol existing on the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UsdIsisSysEntry

usdIsisSysEntry 1.3.6.1.4.1.4874.2.2.38.1.1.1.1
Each row defines information specific to a single instance of the protocol existing on the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  UsdIsisSysEntry  

usdIsisSysInstance 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.1
The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..2147483647  

usdIsisSysVersion 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.2
The version number of the IS-IS protocol to which this instance conforms. This value must be set by the implementation when the row is valid.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..24)  

usdIsisSysType 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.3
The type of this instance of the Integrated IS-IS protocol. This object follows the replaceOnlyWhileDisabled behaviour.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER level1IS(1), level1l2IS(2), level2Only(3)  

usdIsisSysID 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.4
The ID for this instance of the Integrated IS-IS protocol. This value is appended to each of the instance's area addresses to form the Network Entity Titles valid for this instance. The derivation of a value for this object is implementation-specific. Some implementations may assign values and not permit write MAX-ACCESS, others may require the value to be set manually.
Status: current Access: read-write
OBJECT-TYPE    
  SystemID  

usdIsisSysMaxPathSplits 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.5
Maximum number of paths with equal routing metric value which it is permitted to split between. This object follows the replaceOnlyWhileDisabled behaviour.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..32  

usdIsisSysMaxLSPGenInt 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.6
Maximum interval, in seconds, between generated LSPs by this instance. This object follows the resettingTimer behaviour.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

usdIsisSysOrigL1LSPBuffSize 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.7
The maximum size of Level 1 LSPs and SNPs originated by this instance. This object follows the replaceOnlyWhileDisabled behaviour.
Status: current Access: read-write
OBJECT-TYPE    
  LSPBuffSize  

usdIsisSysMaxAreaAddresses 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.8
The maximum number of area addresses to be permitted for the area in which this instance exists. Note that all Intermediate Systems in the same area must have the same value configured for this attribute if correct operation is to be assumed. This object follows the replaceOnlyWhileDisabled behaviour.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..254  

usdIsisSysMinL1LSPGenInt 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.9
Minimum interval, in seconds, between successive generation of L1 LSPs with the same LSPID by this instance. This object follows the resettingTimer behaviour.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..120  

usdIsisSysMinL2LSPGenInt 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.10
Minimum interval, in seconds, between successive generation of L2 LSPs with the same LSPID by this instance. This object follows the resettingTimer behaviour.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..120  

usdIsisSysPollESHelloRate 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.11
The value, in seconds, to be used for the suggested ES configuration timer in ISH PDUs when soliciting the ES configuration.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

usdIsisSysWaitTime 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.12
Number of seconds to delay in waiting state before entering on state. This object follows the resettingTimer behaviour.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

usdIsisSysOperState 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.13
The operational state of this instance of the Integrated IS-IS protocol. Setting this object to the value on when its current value is off enables operation of this instance of the Integrated IS-IS protocol.
Status: current Access: read-write
OBJECT-TYPE    
  OperState  

usdIsisSysL1State 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.14
The state of the Level 1 database.
Status: current Access: read-only
OBJECT-TYPE    
  LevelState  

usdIsisSysCorrLSPs 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.15
Number of corrupted LSPs detected.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

usdIsisSysLSPL1DbaseOloads 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.16
Number of times the LSP L1 database has become overloaded.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

usdIsisSysManAddrDropFromAreas 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.17
Number of times a manual address has been dropped from the area.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

usdIsisSysAttmptToExMaxSeqNums 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.18
Number of times the IS has attempted to exceed the maximum sequence number.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

usdIsisSysSeqNumSkips 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.19
Number of times a sequence number skip has occurred.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

usdIsisSysOwnLSPPurges 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.20
Number of times a zero-aged copy of the system's own LSP is received from some other node.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

usdIsisSysIDFieldLenMismatches 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.21
Number of times a PDU is received with a different value for ID field length to that of the receiving system.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

usdIsisSysMaxAreaAddrMismatches 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.22
Number of times a PDU is received with a different value for MaximumAreaAddresses from that of the receiving system.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

usdIsisSysOrigL2LSPBuffSize 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.23
The maximum size of Level 2 LSPs and SNPs originated by this system. This object follows the replaceOnlyWhileDisabled behaviour.
Status: current Access: read-write
OBJECT-TYPE    
  LSPBuffSize  

usdIsisSysL2State 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.24
The state of the Level 2 database.
Status: current Access: read-only
OBJECT-TYPE    
  LevelState  

usdIsisSysLSPL2DbaseOloads 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.25
Number of times the Level 2 LSP database has become overloaded.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

usdIsisSysAuthFails 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.26
The number of authentication failures recognized by this instance of the protocol.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

usdIsisSysLSPIgnoreErrors 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.27
If true, allow the router to ignore IS-IS link state packets (LSPs) that are received with internal checksum errors rather than purging the LSPs.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdIsisSysMaxAreaCheck 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.28
When on, enables checking of maximum area addresses per IS version of ISO10589.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

usdIsisSysSetOverloadBit 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.29
Isis overload bit
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdIsisSysSetOverloadBitStartupDuration 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.30
Specifies the length in time of seconds to set the overload bit from startup. This object must be set together with usdIsisSysSetOverloadBit, otherwise the agent will return an error.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..86400  

usdIsisSysMaxLspLifetime 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.31
Specifies the maximum time (in seconds) a LSP will remain in the box without being refreshed before being considered invalid.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

usdIsisSysL1SpfInterval 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.32
Minimum interval, in seconds, between level 1 SPF calculations.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..120  

usdIsisSysL2SpfInterval 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.33
Minimum interval, in seconds, between level 2 SPF calculations.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..120  

usdIsisSysIshHoldTime 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.34
Specify a holdtime advertised in ESH/ISH PDUs.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

usdIsisSysIshConfigTimer 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.35
Specify the rate of transmission for ESH and ISH packets.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

usdIsisSysDistributeDomainWide 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.36
When on, enables distribution of prefixes throughout a multi-level domain.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

usdIsisSysDistance 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.37
The weight applied to IS-IS routes.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..255  

usdIsisSysL1MetricStyle 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.38
Specifies the type of IP reachability TLV to advertise in level 1 LSPs.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER usdIsisMetricStyleNarrow(2), usdIsisMetricStyleNarrowTransition(3), usdIsisMetricStyleTransition(4), usdIsisMetricStyleWide(5), usdIsisMetricStyleWideTransition(6)  

usdIsisSysL2MetricStyle 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.39
Specifies the type of IP reachability TLV to advertise in level 2 LSPs.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER usdIsisMetricStyleNarrow(2), usdIsisMetricStyleNarrowTransition(3), usdIsisMetricStyleTransition(4), usdIsisMetricStyleWide(5), usdIsisMetricStyleWideTransition(6)  

usdIsisSysIsoRouteTag 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.40
The ISO routing area tag.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

usdIsisSysMplsTeLevel 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.41
Select flooding of MPLS traffic engineering link information into the specified ISIS level.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER levelNone(0), level1(1), level2(2)  

usdIsisSysMplsTeRtrIdIfIndex 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.42
Configure the stable router interface ID to designate it as TE capable. A value of zero is used to remove any configured router interface ID.
Status: current Access: read-write
OBJECT-TYPE    
  InterfaceIndexOrZero  

usdIsisManAreaAddrTable 1.3.6.1.4.1.4874.2.2.38.1.1.2
The set of manual area addresses configured on this Intermediate System.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UsdIsisManAreaAddrEntry

usdIsisManAreaAddrEntry 1.3.6.1.4.1.4874.2.2.38.1.1.2.1
Each entry contains one area address manually configured on this system.
Status: current Access: not-accessible
OBJECT-TYPE    
  UsdIsisManAreaAddrEntry  

usdIsisManAreaAddrSysInstance 1.3.6.1.4.1.4874.2.2.38.1.1.2.1.1
The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..2147483647  

usdIsisManAreaAddr 1.3.6.1.4.1.4874.2.2.38.1.1.2.1.2
A manually configured area address for this system. This object follows the index behaviour. Note: an index for the entry {1, {49.0001} active} in this table would be the ordered pair (1, (0x03 0x49 0x00 0x01)), as the length of an octet string is part of the OID.
Status: current Access: not-accessible
OBJECT-TYPE    
  OSINSAddress  

usdIsisManAreaAddrRowStatus 1.3.6.1.4.1.4874.2.2.38.1.1.2.1.3
The state of the usdIsisManAreaAddrEntry. This object follows the RowStatus behaviour. If an attempt is made to set this object to the value off when the corresponding usdIsisManAreaAddrEntry is the only valid entry for this instance and when the corresponding IS-IS instance has usdIsisSysOperState set to on then the attempt is rejected.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

usdIsisSysProtSuppTable 1.3.6.1.4.1.4874.2.2.38.1.1.3
This table contains the manually configured set of protocols supported by each instance of the Integrated ISIS protocol.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UsdIsisSysProtSuppEntry

usdIsisSysProtSuppEntry 1.3.6.1.4.1.4874.2.2.38.1.1.3.1
Each entry contains one protocol supported by an instance of the Integrated ISIS protocol.
Status: current Access: not-accessible
OBJECT-TYPE    
  UsdIsisSysProtSuppEntry  

usdIsisSysProtSuppSysInstance 1.3.6.1.4.1.4874.2.2.38.1.1.3.1.1
The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..2147483647  

usdIsisSysProtSuppProtocol 1.3.6.1.4.1.4874.2.2.38.1.1.3.1.2
One supported protocol. This object follows the index behaviour.
Status: current Access: not-accessible
OBJECT-TYPE    
  SupportedProtocol  

usdIsisSysProtSuppRowStatus 1.3.6.1.4.1.4874.2.2.38.1.1.3.1.3
The state of the usdIsisSysProtSuppEntry. This object follows the RowStatus behavior.
Status: current Access: read-only
OBJECT-TYPE    
  RowStatus  

usdIsisSummAddrTable 1.3.6.1.4.1.4874.2.2.38.1.1.4
The set of IP summary addresses to use in forming the contents of Level 2 LSPs originated by this level 2 Intermediate System.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UsdIsisSummAddrEntry

usdIsisSummAddrEntry 1.3.6.1.4.1.4874.2.2.38.1.1.4.1
Each entry contains one IP summary address.
Status: current Access: not-accessible
OBJECT-TYPE    
  UsdIsisSummAddrEntry  

usdIsisSummAddrSysInstance 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.1
The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviours.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..2147483647  

usdIsisSummAddress 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.2
The IP Address value for this summary address. This object follows the index behaviour.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

usdIsisSummAddrMask 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.3
The mask value for this summary address. This object follows the index behaviour.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

usdIsisSummAddrRowStatus 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.4
The existence state of this summary address. This object follows the RowStatus behaviour.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

usdIsisSummAddrOperState 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.5
The operational state of this entry. This object follows the operationalState behaviour. When the operational state changes if this would cause the contents of LSPs originated by the system to change then those new LSPs must be generated and sent as soon as is permitted by the ISIS protocol.
Status: current Access: read-create
OBJECT-TYPE    
  OperState  

usdIsisSummAddrDefaultMetric 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.6
The default metric value to announce this summary address with in Level 1 or 2 LSPs generated by this system. A Metric value of 0 indicates to use the lowest metric value amongst the routes being summarized. When advertising a metric value into a narrow domain (usdIsisSysL1MetricStyle or usdIsisSysL2MetricStyle is set to usdIsisMetricStyleNarrow) the value will be truncated to 63.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..16777214  

usdIsisSummAddrDelayMetric 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.7
The delay metric value to announce this summary address with in Level 2 LSPs generated by this system. The value of zero is reserved to indicate that this metric is not supported.
Status: current Access: read-only
OBJECT-TYPE    
  OtherMetric  

usdIsisSummAddrExpenseMetric 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.8
The expense metric value to announce this summary address with in Level 2 LSPs generated by this system. The value of zero is reserved to indicate that this metric is not supported.
Status: current Access: read-only
OBJECT-TYPE    
  OtherMetric  

usdIsisSummAddrErrorMetric 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.9
The error metric value to announce this summary address with in Level n LSPs generated by this system. The value of zero is reserved to indicate that this metric is not supported.
Status: current Access: read-only
OBJECT-TYPE    
  OtherMetric  

usdIsisSummLevel 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.10
The level of database at which to annouce this summary.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER level1IS(1), level2IS(2), level1l2IS(3)  

usdIsisCircTable 1.3.6.1.4.1.4874.2.2.38.1.2.1
The table of circuits used by each instance of Integrated IS-IS on this system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UsdIsisCircEntry

usdIsisCircEntry 1.3.6.1.4.1.4874.2.2.38.1.2.1.1
An usdIsisCircEntry exists for each circuit used by Integrated IS-IS on this system.
Status: current Access: not-accessible
OBJECT-TYPE    
  UsdIsisCircEntry  

usdIsisCircSysInstance 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.1
The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..2147483647  

usdIsisCircIfIndex 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.2
The value of ifIndex for the interface to which this circuit corresponds.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..2147483647  

usdIsisCircLocalID 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.3
An identification that can be used in protocol packets to identify a circuit. Implementations may devise ways to assure that this value is suitable for the circuit it is used on. LAN packets only have space for 8 bits. Values of usdIsisCircLocalID do not need to be unique. They are only required to differ on LANs where the Intermediate System is the Designated Intermediate System.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

usdIsisCircOperState 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.4
The operational state of the circuit. This object follows the operationalState behaviour.
Status: current Access: read-write
OBJECT-TYPE    
  OperState  

usdIsisCircRowStatus 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.5
The existence state of this circuit. This object follows the RowStatus behaviour.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

usdIsisCircType 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.6
The type of the circuit. This object follows the replaceOnlyWhileDisabled behaviour. The type specified must be compatible with the type of the interface defined by the value of usdIsisCircIfIndex.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER broadcast(1), ptToPt(2)  

usdIsisCircL1DefaultMetric 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.7
The default metric value of this circuit for Level 1 traffic.
Status: current Access: read-write
OBJECT-TYPE    
  UsdDefaultMetric  

usdIsisCircL1DelayMetric 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.8
The delay metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported.
Status: current Access: read-only
OBJECT-TYPE    
  OtherMetric  

usdIsisCircL1ExpenseMetric 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.9
The expense metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported.
Status: current Access: read-only
OBJECT-TYPE    
  OtherMetric  

usdIsisCircL1ErrorMetric 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.10
The error metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported.
Status: current Access: read-only
OBJECT-TYPE    
  OtherMetric  

usdIsisCircExtDomain 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.11
If true, suppress normal transmission of and interpretation of Intra-domain ISIS PDUs on this circuit.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

usdIsisCircAdjChanges 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.12
The number of times an adjacency state change has occurred on this circuit.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

usdIsisCircInitFails 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.13
The number of times initialization of this circuit has failed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

usdIsisCircRejAdjs 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.14
The number of times an adjacency has been rejected on this circuit.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

usdIsisCircOutCtrlPDUs 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.15
The number of IS-IS control PDUs sent on this circuit.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

usdIsisCircInCtrlPDUs 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.16
The number of IS-IS control PDUs received on this circuit.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

usdIsisCircIDFieldLenMismatches 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.17
The number of times an IS-IS control PDU with an ID field length different to that for this system has been received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

usdIsisCircL2DefaultMetric 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.18
The default metric value of this circuit for level 2 traffic.
Status: current Access: read-write
OBJECT-TYPE    
  UsdDefaultMetric  

usdIsisCircL2DelayMetric 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.19
The delay metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported.
Status: current Access: read-only
OBJECT-TYPE    
  OtherMetric  

usdIsisCircL2ExpenseMetric 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.20
The expense metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported.
Status: current Access: read-only
OBJECT-TYPE    
  OtherMetric  

usdIsisCircL2ErrorMetric 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.21
The error metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported.
Status: current Access: read-only
OBJECT-TYPE    
  OtherMetric  

usdIsisCircManL2Only 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.22
When true, indicates that this circuit is to be used only for level 2. This object follows the replaceOnlyWhileDisabled behaviour.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

usdIsisCircL1ISPriority 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.23
The priority for becoming LAN Level 1 Deignated Intermediate System on a broadcast circuit.
Status: current Access: read-write
OBJECT-TYPE    
  ISPriority  

usdIsisCircL1CircID 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.24
The LAN ID allocated by the LAN Level 1 Designated Intermediate System. Where this system is not aware of the value (because it is not participating in the Level 1 Designated Intermediate System election), this object has the value which would be proposed for this circuit (i.e. the concatenation of the local system ID and the one octet local Circuit ID for this circuit.
Status: current Access: read-only
OBJECT-TYPE    
  CircuitID  

usdIsisCircL1DesIS 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.25
The ID of the LAN Level 1 Designated Intermediate System on this circuit. If, for any reason this system is not partaking in the relevant Designated Intermediate System election process, then the value returned is the zero length OCTET STRING.
Status: current Access: read-only
OBJECT-TYPE    
  SystemID  

usdIsisCircLANL1DesISChanges 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.26
The number of times the LAN Level 1 Designated Intermediate System has changed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

usdIsisCircL2ISPriority 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.27
The priority for becoming LAN level 2 Designated Intermediate System.
Status: current Access: read-write
OBJECT-TYPE    
  ISPriority  

usdIsisCircL2CircID 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.28
The LAN ID allocated by the LAN Level 2 Designated Intermediate System. Where this system is not aware of this value (because it is not participating in the Level 2 Designated Intermediate System election), this object has the value which would be proposed for this circuit (i.e. the concatenation of the local system ID and the one octet local Circuit ID for this circuit.
Status: current Access: read-only
OBJECT-TYPE    
  CircuitID  

usdIsisCircL2DesIS 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.29
The ID of the LAN Level 2 Designated Intermediate System on this circuit. If, for any reason, this system is not partaking in the relevant Designated Intermediate System election process, then the value returned is the zero length OCTET STRING.
Status: current Access: read-only
OBJECT-TYPE    
  SystemID  

usdIsisCircLANL2DesISChanges 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.30
The number of times the LAN Level 2 Designated Intermediate System has changed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

usdIsisCircMCAddr 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.31
Specifies which type of multicast address will be used for sending HELLO PDUs on this circuit.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER group(1), functional(2)  

usdIsisCircPtToPtCircID 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.32
The ID of the circuit allocated during initialization. If no value has been negotiated (either because the adjacency is to an End System, or because initialization has not yet successfully completed), this object has the value which would be proposed for this circuit (i.e. the concatenation of the local system ID and the one octet local Circuit ID for this circuit.
Status: current Access: read-only
OBJECT-TYPE    
  CircuitID  

usdIsisCircL1HelloTimer 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.33
Maximum period, in seconds, between Level 1 IIH PDUs on multiaccess networks. It is also used as the period between Hellos on point to point circuits. This object follows the resettingTimer behaviour.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

usdIsisCircL2HelloTimer 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.34
Maximum period, in seconds, between Level 1 IIH PDUs on multiaccess networks. This object follows the resettingTimer behaviour.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

usdIsisCircL1HelloMultiplier 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.35
This value is multiplied by the corresponding HelloTimer and the result in seconds (rounded up) is used as the holding time in transmitted hellos, to be used by receivers of hello packets from this IS.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 3..1000  

usdIsisCircL2HelloMultiplier 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.36
This value is multiplied by the corresponding HelloTimer and the result in seconds (rounded up) is used as the holding time in transmitted hellos, to be used by receivers of hello packets from this IS
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 3..1000  

usdIsisCircMinLSPTransInt 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.37
Minimum interval, in milliseconds, between transmission of LSPs on a circuit. This object follows the resettingTimer behaviour. This timer shall be capable of a resolution not coarser than 10 milliseconds.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

usdIsisCircMinLSPReTransInt 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.38
Minimum interval, in seconds, between re-transmission of an Level 1 or 2 LSP. This object follows the resettingTimer behaviour.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

usdIsisCircL1CSNPInterval 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.39
Interval of time, in seconds, between transmission of Level 1 CSNPs on multiaccess networks if this router is the designated router. On point-to-point networks the default is to not transmit CSNPs.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

usdIsisCircL2CSNPInterval 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.40
Interval of time, in seconds, between transmission of Level 2 CSNPs on multiaccess networks if this router is the designated router. On point-to-point networks the default is to not transmit CSNPs.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

usdIsisCircLSPThrottle 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.41
Minimal interval of time, in milliseconds, between retransmissions of LSPs on a point to point interface.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

usdIsisCircMeshGroupEnabled 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.42
Is this port a member of a mesh group, or blocked? Circuits in the same mesh group act as a virtual multiaccess network. LSPs seen on one circuit in a mesh group will not be flooded to another circuit in the same mesh group.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER inactive(1), blocked(2), set(3)  

usdIsisCircMeshGroup 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.43
Circuits in the same mesh group act as a virtual multiaccess network. LSPs seen on one circuit in a mesh group will not be flooded to another circuit in the same mesh group. If usdIsisCircMeshGroupEnabled is false, this value is ignored.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..2000000000  

usdIsisCircLevel 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.44
The type of this circuit. This object follows the replaceOnlyWhileDisabled behavior.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER level1IS(0), level1l2IS(1), level2Only(2)  

usdIsisCircState 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.45
The operational state of the circuit.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER isisCircuitDown(1), isisCircuitUp(2)  

usdIsisSysHostNameTable 1.3.6.1.4.1.4874.2.2.38.1.1.5
This table contains the manually configured set of host name to system ID aliases supported by each instance of the Integrated ISIS protocol.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UsdIsisSysHostNameEntry

usdIsisSysHostNameEntry 1.3.6.1.4.1.4874.2.2.38.1.1.5.1
Each entry contains one name to system ID alias supported by an instance of the Integrated ISIS protocol.
Status: current Access: not-accessible
OBJECT-TYPE    
  UsdIsisSysHostNameEntry  

usdIsisSysHostNameSysInstance 1.3.6.1.4.1.4874.2.2.38.1.1.5.1.1
The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..2147483647  

usdIsisSysHostNameSysId 1.3.6.1.4.1.4874.2.2.38.1.1.5.1.2
The ID for the system which this name will be assigned.
Status: current Access: not-accessible
OBJECT-TYPE    
  SystemID  

usdIsisSysHostNameAreaAddr 1.3.6.1.4.1.4874.2.2.38.1.1.5.1.3
A configured area address for the system which this name will be assigned. This object follows the index behaviour. Note: an index for the entry {1, {49.0001} active} in this table would be the ordered pair (1, (0x03 0x49 0x00 0x01)), as the length of an Octet string is part of the OID.
Status: current Access: read-write
OBJECT-TYPE    
  OSINSAddress  

usdIsisSysHostNameName 1.3.6.1.4.1.4874.2.2.38.1.1.5.1.4
A string to use when displaying system data with this system ID.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

usdIsisSysHostNameType 1.3.6.1.4.1.4874.2.2.38.1.1.5.1.5
The type of host name entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER hostNameTypeStatic(1), hostNameTypeDynamic(2)  

usdIsisSysHostNameRowStatus 1.3.6.1.4.1.4874.2.2.38.1.1.5.1.6
The status of this host name entry. This object follows the RowStatus behaviour.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

usdIsisSysAreaAuthenticationTable 1.3.6.1.4.1.4874.2.2.38.1.1.6
This table contains the manually configured set of area authentication keys supported by each instance of the Integrated ISIS protocol.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UsdIsisSysAreaAuthenticationEntry

usdIsisSysAreaAuthenticationEntry 1.3.6.1.4.1.4874.2.2.38.1.1.6.1
Each entry contains one area authentication key supported by an instance of the Integrated ISIS protocol.
Status: current Access: not-accessible
OBJECT-TYPE    
  UsdIsisSysAreaAuthenticationEntry  

usdIsisSysAreaAuthenticationSysInstance 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.1
The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..2147483647  

usdIsisSysAreaAuthenticationKeyId 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.2
The unique identifier of the instance to which this row corresponds. This object follows the index behaviour.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..2147483647  

usdIsisSysAreaAuthenticationPwd 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.3
The value to be used as the Authentication Key in Level 1 Link State Packets whenever the value of usdIsisSysAreaAuthenticationKeyType has a value of plaintext or hmacMd5. A modification of usdIsisSysAreaAuthenticationKeyType does not modify the usdIsisSysAreaAuthenticationPwd value. Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

usdIsisSysAreaAuthenticationKeyType 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.4
What authentication scheme, if any, is used to protect Level 1 Link State packets and sequence number packets
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), plaintext(1), hmacMd5(2)  

usdIsisSysAreaAuthenticationStartAcceptTime 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.5
The date and time when this authentication key will start to be used to validate level 1 LSPs and SNPs received. The Default value the start accept time will be the current time when the key was created
Status: current Access: read-write
OBJECT-TYPE    
  AuthTime  

usdIsisSysAreaAuthenticationStartGenerateTime 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.6
The date and time when this authentication key will start to be used to authenticate level 1 LSPs and SNPs transmitted. The Default value the start accept time will be the current time when the key was created + 2 minutes
Status: current Access: read-write
OBJECT-TYPE    
  AuthTime  

usdIsisSysAreaAuthenticationStopAcceptTime 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.7
The date and time when this authentication key will stop being accepted as a valid level 1 LSP and SNP key received. A value of zero indicates the key will never stop being used to authenticate packets.
Status: current Access: read-write
OBJECT-TYPE    
  AuthTime  

usdIsisSysAreaAuthenticationStopGenerateTime 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.8
The date and time when this authentication key will stop being used to authenticate level 1 LSPs and SNPs transmitted. A value of zero indicates the key will never stop being used to authenticate packets.
Status: current Access: read-write
OBJECT-TYPE    
  AuthTime  

usdIsisSysAreaAuthenticationRowStatus 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.9
The existence state of this authentication key. This object follows the RowStatus behaviour.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

usdIsisSysDomainAuthenticationTable 1.3.6.1.4.1.4874.2.2.38.1.1.7
This table contains the manually configured set of domain authentication keys supported by each instance of the Integrated ISIS protocol.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UsdIsisSysDomainAuthenticationEntry

usdIsisSysDomainAuthenticationEntry 1.3.6.1.4.1.4874.2.2.38.1.1.7.1
Each entry contains one domain authentication key supported by an instance of the Integrated ISIS protocol.
Status: current Access: not-accessible
OBJECT-TYPE    
  UsdIsisSysDomainAuthenticationEntry  

usdIsisSysDomainAuthenticationSysInstance 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.1
The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..2147483647  

usdIsisSysDomainAuthenticationKeyId 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.2
The unique identifier of the instance to which this row corresponds. This object follows the index behaviour.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..2147483647  

usdIsisSysDomainAuthenticationPwd 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.3
The value to be used as the Authentication Key in Level 2 Link State Packets whenever the value of usdIsisSysDomainAuthenticationKeyType has a value of plaintext or hmacMd5. A modification of usdIsisSysDomainAuthenticationKeyType does not modify the usdIsisSysDomainAuthenticationPwd value. Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

usdIsisSysDomainAuthenticationKeyType 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.4
What authentication scheme, if any, is used to protect Level 2 Link State packets and Sequence Number packets
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), plaintext(1), hmacMd5(2)  

usdIsisSysDomainAuthenticationStartAcceptTime 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.5
The date and time when this authentication key will start to be used to validate level 2 LSPs and SNPs received. The Default value the start accept time will be the current time when the key was created
Status: current Access: read-write
OBJECT-TYPE    
  AuthTime  

usdIsisSysDomainAuthenticationStartGenerateTime 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.6
The date and time when this authentication key will start to be used to authenticate level 2 LSPs and SNPs transmitted. The Default value the start accept time will be the current time when the key was created + 2 minutes
Status: current Access: read-write
OBJECT-TYPE    
  AuthTime  

usdIsisSysDomainAuthenticationStopAcceptTime 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.7
The date and time when this authentication key will stop being accepted as a valid level 2 LSP and SNP key received. A value of zero indicates the key will never stop being used to authenticate packets.
Status: current Access: read-write
OBJECT-TYPE    
  AuthTime  

usdIsisSysDomainAuthenticationStopGenerateTime 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.8
The date and time when this authentication key will stop being used to authenticate level 2 LSPs and SNPs transmitted. A value of zero indicates the key will never stop being used to authenticate packets.
Status: current Access: read-write
OBJECT-TYPE    
  AuthTime  

usdIsisSysDomainAuthenticationRowStatus 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.9
The existence state of this authentication key. This object follows the RowStatus behaviour.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

usdIsisSysL1CircAuthenticationTable 1.3.6.1.4.1.4874.2.2.38.1.2.2
This table contains the manually configured set of Level 1 Circuit authentication keys supported by each instance of the Integrated ISIS protocol.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UsdIsisSysL1CircAuthenticationEntry

usdIsisSysL1CircAuthenticationEntry 1.3.6.1.4.1.4874.2.2.38.1.2.2.1
Each entry contains one Level 1 circuit authentication key supported by an instance of the Integrated ISIS protocol.
Status: current Access: not-accessible
OBJECT-TYPE    
  UsdIsisSysL1CircAuthenticationEntry  

usdIsisSysL1CircAuthenticationSysInstance 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.1
The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..2147483647  

usdIsisSysL1CircAuthenticationIfIndex 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.2
The value of ifIndex for the interface to which this circuit corresponds.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..2147483647  

usdIsisSysL1CircAuthenticationKeyId 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.3
The unique identifier of the instance to which this row corresponds. This object follows the index behaviour.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..2147483647  

usdIsisSysL1CircAuthenticationPwd 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.4
The value to be used as the Authentication Key in Level 1 Hello Packets whenever the value of usdIsisSysL1CircAuthenticationKeyType has a value of hmacMd5. A modification of usdIsisSysL1CircAuthenticationKeyType does not modify the usdIsisSysL1CircAuthenticationPwd value. Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

usdIsisSysL1CircAuthenticationKeyType 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.5
What authentication scheme, if any, is used to protect Level 1 hello packets.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), plaintext(1), hmacMd5(2)  

usdIsisSysL1CircAuthenticationStartAcceptTime 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.6
The date and time when this authentication key will start to be used to validate level 1 IIH packets received. The Default value the start accept time will be the current time when the key was created.
Status: current Access: read-write
OBJECT-TYPE    
  AuthTime  

usdIsisSysL1CircAuthenticationStartGenerateTime 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.7
The date and time when this authentication key will start to be used to authenticate level 1 IIH packets transmitted. The Default value the start accept time will be the current time when the key was created + 2 minutes.
Status: current Access: read-write
OBJECT-TYPE    
  AuthTime  

usdIsisSysL1CircAuthenticationStopAcceptTime 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.8
The date and time when this authentication key will stop being accepted as a valid level 1 IIH packets key received. A value of zero indicates the key will never stop being used to authenticate packets.
Status: current Access: read-write
OBJECT-TYPE    
  AuthTime  

usdIsisSysL1CircAuthenticationStopGenerateTime 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.9
The date and time when this authentication key will stop being used to authenticate level 1 IIH packets transmitted. A value of zero indicates the key will never stop being used to authenticate packets.
Status: current Access: read-write
OBJECT-TYPE    
  AuthTime  

usdIsisSysL1CircAuthenticationRowStatus 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.10
The existence state of this authentication key. This object follows the RowStatus behaviour.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

usdIsisSysL2CircAuthenticationTable 1.3.6.1.4.1.4874.2.2.38.1.2.3
This table contains the manually configured set of Level 2 Circuit authentication keys supported by each instance of the Integrated ISIS protocol.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UsdIsisSysL2CircAuthenticationEntry

usdIsisSysL2CircAuthenticationEntry 1.3.6.1.4.1.4874.2.2.38.1.2.3.1
Each entry contains one Level 2 circuit authentication key supported by an instance of the Integrated ISIS protocol.
Status: current Access: not-accessible
OBJECT-TYPE    
  UsdIsisSysL2CircAuthenticationEntry  

usdIsisSysL2CircAuthenticationSysInstance 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.1
The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..2147483647  

usdIsisSysL2CircAuthenticationIfIndex 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.2
The value of ifIndex for the interface to which this circuit corresponds.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..2147483647  

usdIsisSysL2CircAuthenticationKeyId 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.3
The unique identifier of the instance to which this row corresponds. This object follows the index behaviour.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..2147483647  

usdIsisSysL2CircAuthenticationPwd 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.4
The value to be used as the Authentication Key in Level 2 Hello Packets whenever the value of usdIsisSysL2CircAuthenticationKeyType has a value of hmacMd5. A modification of usdIsisSysL2CircAuthenticationKeyType does not modify the usdIsisSysL2CircAuthenticationPwd value. Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

usdIsisSysL2CircAuthenticationKeyType 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.5
What authentication scheme, if any, is used to protect Level 2 hello packets.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), plaintext(1), hmacMd5(2)  

usdIsisSysL2CircAuthenticationStartAcceptTime 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.6
The date and time when this authentication key will start to be used to validate level 2 IIH packets received. The Default value the start accept time will be the current time when the key was created.
Status: current Access: read-write
OBJECT-TYPE    
  AuthTime  

usdIsisSysL2CircAuthenticationStartGenerateTime 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.7
The date and time when this authentication key will start to be used to authenticate level 2 IIH packets transmitted. The Default value the start accept time will be the current time when the key was created + 2 minutes.
Status: current Access: read-write
OBJECT-TYPE    
  AuthTime  

usdIsisSysL2CircAuthenticationStopAcceptTime 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.8
The date and time when this authentication key will stop being accepted as a valid level 2 IIH packets key received. A value of zero indicates the key will never stop being used to authenticate packets.
Status: current Access: read-write
OBJECT-TYPE    
  AuthTime  

usdIsisSysL2CircAuthenticationStopGenerateTime 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.9
The date and time when this authentication key will stop being used to authenticate level 2 IIH packets transmitted. A value of zero indicates the key will never stop being used to authenticate packets.
Status: current Access: read-write
OBJECT-TYPE    
  AuthTime  

usdIsisSysL2CircAuthenticationRowStatus 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.10
The existence state of this authentication key. This object follows the RowStatus behaviour.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

usdIsisCompliances 1.3.6.1.4.1.4874.2.2.38.3.1
OBJECT IDENTIFIER    

usdIsisMIBGroups 1.3.6.1.4.1.4874.2.2.38.3.2
OBJECT IDENTIFIER    

usdIsisCompliance 1.3.6.1.4.1.4874.2.2.38.3.1.1
Obsolete compliance statement for systems supporting ISIS functionality. This statement became obsolete when the usdIsisCircState object was added.
Status: obsolete Access: read-write
MODULE-COMPLIANCE    

usdIsisCompliance2 1.3.6.1.4.1.4874.2.2.38.3.1.2
Obsolete compliance statement for systems supporting ISIS functionality. This statement became obsolete when MPSL support was added.
Status: obsolete Access: read-write
MODULE-COMPLIANCE    

usdIsisCompliance3 1.3.6.1.4.1.4874.2.2.38.3.1.3
The compliance statement for systems supporting ISIS functionality.
Status: current Access: read-write
MODULE-COMPLIANCE    

usdIsisSystemMgmtGroup 1.3.6.1.4.1.4874.2.2.38.3.2.1
Obsolete system level objects for ISIS management functionality. This group became obsolete when the MPLS management objects were added.
Status: obsolete Access: read-write
OBJECT-GROUP    

usdIsisCircuitMgmtGroup 1.3.6.1.4.1.4874.2.2.38.3.2.2
Obsolete circuit management objects. This group became obsolete when the usdIsisCircState object was added.
Status: obsolete Access: read-write
OBJECT-GROUP    

usdIsisCircuitMgmtGroup2 1.3.6.1.4.1.4874.2.2.38.3.2.3
The circuit management objects.
Status: current Access: read-write
OBJECT-GROUP    

usdIsisSystemMgmtGroup2 1.3.6.1.4.1.4874.2.2.38.3.2.4
The system level objects for ISIS management functionality.
Status: current Access: read-write
OBJECT-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor