Unisphere-Data-IP-MIB

File: Unisphere-Data-IP-MIB.mib (64156 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-TC	SNMPv2-CONF
IF-MIB	IP-FORWARD-MIB	Unisphere-Data-MIBs
Unisphere-Data-TC

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	Integer32
Unsigned32	IpAddress	Counter64
RowStatus	MODULE-COMPLIANCE	OBJECT-GROUP
InterfaceIndex	InterfaceIndexOrZero	ipCidrRouteEntry
usDataMibs	UsdEnable	UsdIpAddrLessIf
UsdNextIfIndex

Defined Types

UsdIpIfEntry
SEQUENCE
	usdIpIfIndex	InterfaceIndex
	usdIpIfRowStatus	RowStatus
	usdIpIfLowerIfIndex	InterfaceIndexOrZero
	usdIpIfType	INTEGER
	usdIpIfTypeId	Unsigned32
	usdIpIfSAValidationEnable	UsdEnable
	usdIpIfCreationType	INTEGER
	usdIpIfProfileId	Unsigned32
	usdIpIfAlwaysUp	UsdEnable
	usdIpIfLoopback	UsdEnable
	usdIpIfLoopbackUid	InterfaceIndexOrZero
	usdIpIfDebounceTime	Integer32
	usdIpIfForwarding	UsdEnable
	usdIpIfForceFragmentation	UsdEnable
	usdIpIfSharesLowerUid	UsdEnable
	usdIpIfFilterOptions	Unsigned32
	usdIpIfName	OCTET STRING
	usdIpIfArpTimeout	Unsigned32
	usdIpIfAdminSpeed	Unsigned32
	usdIpIfMultipathMode	INTEGER
	usdIpIfSharedNhAddr	IpAddress
	usdIpIfSharedNhRouterId	Unsigned32
	usdIpIfPrimaryIpAddress	IpAddress
	usdIpIfPrimaryIpMask	IpAddress
	usdIpIfOperDebounceTime	Integer32

UsdIpIfStatsEntry
SEQUENCE
	usdIpIfStatsIndex	InterfaceIndex
	usdIpIfStatsInPackets	Counter64
	usdIpIfStatsInOctets	Counter64
	usdIpIfStatsInPoliciedPackets	Counter64
	usdIpIfStatsInPoliciedOctets	Counter64
	usdIpIfStatsInErrorPackets	Counter64
	usdIpIfStatsInSpoofedPackets	Counter64
	usdIpIfStatsInForwardedPackets	Counter64
	usdIpIfStatsInForwardedOctets	Counter64
	usdIpIfStatsOutForwardedPackets	Counter64
	usdIpIfStatsOutForwardedOctets	Counter64
	usdIpIfStatsOutSchedDropPackets	Counter64
	usdIpIfStatsOutSchedDropOctets	Counter64
	usdIpIfStatsOutRequestedPackets	Counter64
	usdIpIfStatsOutRequestedOctets	Counter64
	usdIpIfStatsOutPoliciedPackets	Counter64
	usdIpIfStatsOutPoliciedOctets	Counter64
	usdIpIfStatsGreenOutSchedDropPackets	Counter64
	usdIpIfStatsYellowOutSchedDropPackets	Counter64
	usdIpIfStatsRedOutSchedDropPackets	Counter64
	usdIpIfStatsGreenOutSchedDropOctets	Counter64
	usdIpIfStatsYellowOutSchedDropOctets	Counter64
	usdIpIfStatsRedOutSchedDropOctets	Counter64

UsdIpIfAssocEntry
SEQUENCE
	usdIpIfAssocLowerIfIndex	InterfaceIndex
	usdIpIfAssocIpIfIndex	InterfaceIndexOrZero

UsdIpAddrEntry
SEQUENCE
	usdIpAdEntAddr	UsdIpAddrLessIf
	usdIpAdEntIfIndex	InterfaceIndex
	usdIpAdEntNetMask	IpAddress
	usdIpAdEntBcastAddr	Integer32
	usdIpAdEntReasmMaxSize	Integer32
	usdIpAdEntRowStatus	RowStatus
	usdIpAdEntAdminStatus	UsdEnable
	usdIpAdEntArpRspEnable	UsdEnable
	usdIpAdEntProxyArpRspEnable	UsdEnable
	usdIpAdEntIgmpEnable	UsdEnable
	usdIpAdEntDirectedBcastEnable	UsdEnable
	usdIpAdEntIcmpRedirectEnable	UsdEnable
	usdIpAdEntIcmpMaskReplyEnable	UsdEnable
	usdIpAdEntIcmpUnreachEnable	UsdEnable
	usdIpAdEntMtu	Integer32
	usdIpAdEntUnnumLoopbackIfIndex	InterfaceIndexOrZero
	usdIpAdEntIrdpEnable	UsdEnable
	usdIpAdEntAccessRouteEnable	UsdEnable
	usdIpAdEntAccessRouteHost	IpAddress
	usdIpAdEntIsSecondary	UsdEnable

UsdIpRouteStaticEntry
SEQUENCE
	usdIpRouteStaticDest	IpAddress
	usdIpRouteStaticMask	IpAddress
	usdIpRouteStaticPref	Integer32
	usdIpRouteStaticNextHop	UsdIpAddrLessIf
	usdIpRouteStaticRowStatus	RowStatus
	usdIpRouteStaticIfIndex	Integer32
	usdIpRouteStaticStatus	INTEGER
	usdIpRouteStaticNextHopAS	Integer32
	usdIpRouteStaticMetric	Integer32
	usdIpRouteStaticTag	Unsigned32

UsdIpCidrRouteEntry
SEQUENCE
	usdIpCidrRoutePref	Integer32
	usdIpCidrRouteArea	IpAddress
	usdIpCidrRouteTag	Unsigned32

Defined Values

usdIpMIB		1.3.6.1.4.1.4874.2.2.12
The IP Protocol MIB for the Unisphere Networks Inc. enterprise.
MODULE-IDENTITY

usdIpObjects		1.3.6.1.4.1.4874.2.2.12.1
OBJECT IDENTIFIER

usdIpInterface		1.3.6.1.4.1.4874.2.2.12.1.1
OBJECT IDENTIFIER

usdIpAddress		1.3.6.1.4.1.4874.2.2.12.1.2
OBJECT IDENTIFIER

usdIpRoute		1.3.6.1.4.1.4874.2.2.12.1.3
OBJECT IDENTIFIER

usdIpGlobals		1.3.6.1.4.1.4874.2.2.12.1.4
OBJECT IDENTIFIER

usdIpDebounceTime		1.3.6.1.4.1.4874.2.2.12.1.4.1
The time in milliseconds that an event has to be in the same state before being reported.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..60000

usdIpRouterId		1.3.6.1.4.1.4874.2.2.12.1.4.2
The router-id that this IP router will use to identify itself.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

usdIpSourceRoutingAdminStatus		1.3.6.1.4.1.4874.2.2.12.1.4.3
The administrative setting for source routing.
Status: current	Access: read-write
OBJECT-TYPE
	UsdEnable

usdIpVpnIdOui		1.3.6.1.4.1.4874.2.2.12.1.4.4
The OUI portion of the VPN identifier. This object must be set coincident with the index portion of the VpnId (usdIpVpnIdIndex), otherwise the set will fail.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..16777215

usdIpVpnIdIndex		1.3.6.1.4.1.4874.2.2.12.1.4.5
The index portion of the VPN identifier. This object must be set coincident with the OUI portion of the VpnId (usdIpVpnOui), otherwise the set will fail.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

usdIpNextIfIndex		1.3.6.1.4.1.4874.2.2.12.1.1.1
Coordinate ifIndex value allocation for entries in usdIpIfTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously.
Status: current	Access: read-only
OBJECT-TYPE
	UsdNextIfIndex

usdIpIfTable		1.3.6.1.4.1.4874.2.2.12.1.1.2
This table contains entries for IP interfaces present in the system.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		UsdIpIfEntry

usdIpIfEntry		1.3.6.1.4.1.4874.2.2.12.1.1.2.1
Each entry describes the characteristics of an IP interface. Creating/deleting entries in this table causes corresponding entries for be created/deleted in ifTable/ifXTable/usdIfTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	UsdIpIfEntry

usdIpIfIndex		1.3.6.1.4.1.4874.2.2.12.1.1.2.1.1
The ifIndex of the IP interface. When creating entries in this table, suitable values for this object are determined by reading usdIpNextIfIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	InterfaceIndex

usdIpIfRowStatus		1.3.6.1.4.1.4874.2.2.12.1.1.2.1.2
Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: usdIpIfRowStatus usdIpIfLowerIfIndex In addition, when creating an entry the following conditions must hold: A value for usdIpIfIndex must have been determined previously, typically by reading usdIpNextIfIndex. The interface identified by a nonzero usdIpIfLowerIfIndex must exist. If usdIpIfType is configured to be 'loopback' or 'null', usdIpIfLowerIfIndex must be set to zero. The selected value of usdIpIfType must be compatible with the underlying media interface identified by usdIpIfLowerIfIndex. Once created, the following objects may not be modified: usdIpIfLowerIfIndex usdIpIfType usdIpIfTypeId A corresponding entry in ifTable/ifXTable/usdIfTable is created/destroyed as a result of creating/destroying an entry in this table.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

usdIpIfLowerIfIndex		1.3.6.1.4.1.4874.2.2.12.1.1.2.1.3
The ifIndex of a media interface over which this IP interface is to be layered. A value of zero is used when usdIpIfType is specified to be loopback(4) or null(5).
Status: current	Access: read-create
OBJECT-TYPE
	InterfaceIndexOrZero

usdIpIfType		1.3.6.1.4.1.4874.2.2.12.1.1.2.1.4
The type of network interface.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	other(0), broadcast(1), pointToPoint(2), nbma(3), loopback(4), null(5)

usdIpIfTypeId		1.3.6.1.4.1.4874.2.2.12.1.1.2.1.5
A numerical distinguisher relevant for the loopback and null IP interface types. loopback Must be unique for all IP interfaces of this type. null Must be unique for all IP interfaces of this type. (FOR IMPLEMENTATIONS THAT SUPPORT ONE AND ONLY ONE NULL INTERFACE, THE VALUE ZERO MUST BE USED.) For all other IP interface types, this object is not relevant, reports a value of zero when read, and must be given a value of zero if explicitly configured during creation.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

usdIpIfSAValidationEnable		1.3.6.1.4.1.4874.2.2.12.1.1.2.1.6
Enable/disable source address validation on this IP network interface.
Status: current	Access: read-create
OBJECT-TYPE
	UsdEnable

usdIpIfCreationType		1.3.6.1.4.1.4874.2.2.12.1.1.2.1.7
Specify if the interface was created due to static configuration or due to some dynamic event. Dynamic interfaces are not stored in NVS.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	static(1), dynamic(2)

usdIpIfProfileId		1.3.6.1.4.1.4874.2.2.12.1.1.2.1.8
Identified the profile used when creating a dynamic interface.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

usdIpIfAlwaysUp		1.3.6.1.4.1.4874.2.2.12.1.1.2.1.9
When enabled, the interface is determined to be up regardless of the state of any lower layer interfaces.
Status: current	Access: read-create
OBJECT-TYPE
	UsdEnable

usdIpIfLoopback		1.3.6.1.4.1.4874.2.2.12.1.1.2.1.10
Indicates whether the interface is a loopback type interface.
Status: current	Access: read-create
OBJECT-TYPE
	UsdEnable

usdIpIfLoopbackUid		1.3.6.1.4.1.4874.2.2.12.1.1.2.1.11
Specify the interface index of a loopback interface whose IP address should be used when sourcing traffic on this interface. Useful for unnumbered interfaces.
Status: current	Access: read-create
OBJECT-TYPE
	InterfaceIndexOrZero

usdIpIfDebounceTime		1.3.6.1.4.1.4874.2.2.12.1.1.2.1.12
Specifies the time in milliseconds that a layer 2 interface must remain in a state before it is conveyed to the IP layer. Useful for interfaces that experience brief outages that should not constitute a route flap. A value of 0 indicates that the feature is disabled.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..60000

usdIpIfForwarding		1.3.6.1.4.1.4874.2.2.12.1.1.2.1.13
Enable/disable the forwarding of IP traffic to/from this interface. This is currently only applicable to the out-of-band management port.
Status: current	Access: read-create
OBJECT-TYPE
	UsdEnable

usdIpIfForceFragmentation		1.3.6.1.4.1.4874.2.2.12.1.1.2.1.14
Force the fragmentation of all IP packets greater than the interface MTU even if the DF bit is set.
Status: current	Access: read-create
OBJECT-TYPE
	UsdEnable

usdIpIfSharesLowerUid		1.3.6.1.4.1.4874.2.2.12.1.1.2.1.15
Identifies the interface as sharing a lower interface with another interface vs owning it outright.
Status: current	Access: read-only
OBJECT-TYPE
	UsdEnable

usdIpIfFilterOptions		1.3.6.1.4.1.4874.2.2.12.1.1.2.1.16
Bit mask to configure the interface to filter packets with IP header options. Currently, either no bits or all bits may be set.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

usdIpIfName		1.3.6.1.4.1.4874.2.2.12.1.1.2.1.17
Specify the IP interface discriminator for an IP interface not attached to a layer 2 interface with a specific location.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..255)

usdIpIfArpTimeout		1.3.6.1.4.1.4874.2.2.12.1.1.2.1.18
Specify the ARP timeout for this interface in seconds.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

usdIpIfAdminSpeed		1.3.6.1.4.1.4874.2.2.12.1.1.2.1.19
Set an administrative speed for the interface that overrides the speed learned from the lower layer. A value of 0 indicates no speed is specified.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

usdIpIfMultipathMode		1.3.6.1.4.1.4874.2.2.12.1.1.2.1.20
Configure the mode this interface should use when forwarding equal-cost multipath traffic.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	hashed(1), roundRobin(2)

usdIpIfSharedNhAddr		1.3.6.1.4.1.4874.2.2.12.1.1.2.1.21
The IP address of either a direct or indirect next-hop toward which this shared interface should point.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

usdIpIfSharedNhRouterId		1.3.6.1.4.1.4874.2.2.12.1.1.2.1.22
The identifier for the domain of a virtual router in which the usdIpIfSharedNhAddr should be resolved.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

usdIpIfPrimaryIpAddress		1.3.6.1.4.1.4874.2.2.12.1.1.2.1.23
The IP address of the primary IP network on an interface.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

usdIpIfPrimaryIpMask		1.3.6.1.4.1.4874.2.2.12.1.1.2.1.24
The IP address mask of the primary IP network on an interface.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

usdIpIfOperDebounceTime		1.3.6.1.4.1.4874.2.2.12.1.1.2.1.25
Indicates the operational time in milliseconds that a layer2 interface must remain in a state before it is conveyed to the IP layer. Useful for interfaces that experience brief outages that should not constitute a route flap. A value of 0 indicates that the feature is disabled.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..60000

usdIpIfStatsTable		1.3.6.1.4.1.4874.2.2.12.1.1.3
This table contains entries for IP interfaces present in the system.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		UsdIpIfStatsEntry

usdIpIfStatsEntry		1.3.6.1.4.1.4874.2.2.12.1.1.3.1
Each entry contains statistics for an IP interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	UsdIpIfStatsEntry

usdIpIfStatsIndex		1.3.6.1.4.1.4874.2.2.12.1.1.3.1.1
The ifIndex of the IP interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	InterfaceIndex

usdIpIfStatsInPackets		1.3.6.1.4.1.4874.2.2.12.1.1.3.1.2
The number of packets received on this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

usdIpIfStatsInOctets		1.3.6.1.4.1.4874.2.2.12.1.1.3.1.3
The number of octets received on this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

usdIpIfStatsInPoliciedPackets		1.3.6.1.4.1.4874.2.2.12.1.1.3.1.4
The number of packets dropped due to rate limiters attached to this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

usdIpIfStatsInPoliciedOctets		1.3.6.1.4.1.4874.2.2.12.1.1.3.1.5
The number of octets dropped due to rate limiters attached to this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

usdIpIfStatsInErrorPackets		1.3.6.1.4.1.4874.2.2.12.1.1.3.1.6
The number of packets received with errors on this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

usdIpIfStatsInSpoofedPackets		1.3.6.1.4.1.4874.2.2.12.1.1.3.1.7
The number of packets received on this interface with destination unknown.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

usdIpIfStatsInForwardedPackets		1.3.6.1.4.1.4874.2.2.12.1.1.3.1.8
The number of packets received on this interface that were forwarded by any interface in the system.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Counter64

usdIpIfStatsInForwardedOctets		1.3.6.1.4.1.4874.2.2.12.1.1.3.1.9
The number of octets received on this interface that were forwarded by any interface in the system.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Counter64

usdIpIfStatsOutForwardedPackets		1.3.6.1.4.1.4874.2.2.12.1.1.3.1.10
The number of packets forwarded by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

usdIpIfStatsOutForwardedOctets		1.3.6.1.4.1.4874.2.2.12.1.1.3.1.11
The number of octets forwarded by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

usdIpIfStatsOutSchedDropPackets		1.3.6.1.4.1.4874.2.2.12.1.1.3.1.12
The number of packets dropped at this interface due to output queue congestion.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

usdIpIfStatsOutSchedDropOctets		1.3.6.1.4.1.4874.2.2.12.1.1.3.1.13
The number of octets dropped at this interface due to output queue congestion.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

usdIpIfStatsOutRequestedPackets		1.3.6.1.4.1.4874.2.2.12.1.1.3.1.14
The number of packets requested for transmission at this interface.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Counter64

usdIpIfStatsOutRequestedOctets		1.3.6.1.4.1.4874.2.2.12.1.1.3.1.15
The number of octets requested for transmission at this interface.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Counter64

usdIpIfStatsOutPoliciedPackets		1.3.6.1.4.1.4874.2.2.12.1.1.3.1.16
The number of packets dropped due to rate limiters attached to this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

usdIpIfStatsOutPoliciedOctets		1.3.6.1.4.1.4874.2.2.12.1.1.3.1.17
The number of octets dropped due to rate limiters attached to this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

usdIpIfStatsGreenOutSchedDropPackets		1.3.6.1.4.1.4874.2.2.12.1.1.3.1.18
The number of packets dropped at this interface due to output queue congestion in the green output queue. The green output queue has lowest drop probability.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter64

usdIpIfStatsYellowOutSchedDropPackets		1.3.6.1.4.1.4874.2.2.12.1.1.3.1.19
The number of packets dropped at this interface due to output queue congestion in the yellow output queue. The yellow output queue has medium level drop probability.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter64

usdIpIfStatsRedOutSchedDropPackets		1.3.6.1.4.1.4874.2.2.12.1.1.3.1.20
The number of packets dropped at this interface due to output queue congestion in the red output queue. The red output queue has highest level drop probability.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter64

usdIpIfStatsGreenOutSchedDropOctets		1.3.6.1.4.1.4874.2.2.12.1.1.3.1.21
The number of octets dropped at this interface due to output queue congestion in the green output queue. The green output queue has the lowest drop probability.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter64

usdIpIfStatsYellowOutSchedDropOctets		1.3.6.1.4.1.4874.2.2.12.1.1.3.1.22
The number of octets dropped at this interface due to output queue congestion in the yellow output queue. The yellow output queue has the medium drop probability.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter64

usdIpIfStatsRedOutSchedDropOctets		1.3.6.1.4.1.4874.2.2.12.1.1.3.1.23
The number of octets dropped at this interface due to output queue congestion in the red output queue. The red output queue has the highest drop probability.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter64

usdIpIfAssocTable		1.3.6.1.4.1.4874.2.2.12.1.1.4
This table contains entries of interfaces present in the system.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		UsdIpIfAssocEntry

usdIpIfAssocEntry		1.3.6.1.4.1.4874.2.2.12.1.1.4.1
Each entry in this table returns the ifIndex of the IP interface associated with the lower layer ifIndex supplied as the index to this table. The purpose of this table is to translate L2 interfaces to corresponding L3 interfaces for billing applications. Since interesting billing related statistics are kept at L3, it is often useful to know the L2-L3 relationship. Note that this table is not confined to L2-L3 relationships. Any interface sublayer can be used to access this table to determine the relationship with the L3 interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	UsdIpIfAssocEntry

usdIpIfAssocLowerIfIndex		1.3.6.1.4.1.4874.2.2.12.1.1.4.1.1
The ifIndex of the lower layer interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	InterfaceIndex

usdIpIfAssocIpIfIndex		1.3.6.1.4.1.4874.2.2.12.1.1.4.1.2
The ifIndex of the IP interface associated with the lower layer usdIpIfAssocLowerIfIndex. In cases where there is not a 1 to 1 relationship between lower layer and higher layer IP interface, a zero value usdIpIfAssocIpIfIndex is returned; this includes the case where an IP interface has not yet been configued at the top of the interface column. An example usage of this table: Assume a user needs to know the ifIndex relationship for all interfaces with the L3 IP interface. Then starting at the bottom of the stack below, the ATM and AAL5's ifIndex would be used to access the table. The agent will return 0 for each of these cases because multiple customer's traffic is demultiplexed at these levels. IP_1 PPP IP_2 ATM1483_1 ATM1483_2 \ / AAL5 ATM If the ATM1483_1 ifIndex is used to access this table, then the value of usdIpIfAssocLowerIfIndex will be set to the ifIndex of IP_1. Similarily, if the ATM1483_2 ifIndex is used to access this table, the usdIpifAssocLowerIfIndex will set to the ifIndex of IP_2.
Status: current	Access: read-only
OBJECT-TYPE
	InterfaceIndexOrZero

usdIpAddrGlobals		1.3.6.1.4.1.4874.2.2.12.1.2.1
OBJECT IDENTIFIER

usdIpArpTimeout		1.3.6.1.4.1.4874.2.2.12.1.2.1.1
Timeout, in seconds, for ARP requests issued by this entity.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..60

usdIpAddrTable		1.3.6.1.4.1.4874.2.2.12.1.2.2
IP addressing information for this entity's IP network interfaces. Representation of both numbered and unnumbered IP interfaces is supported.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		UsdIpAddrEntry

usdIpAddrEntry		1.3.6.1.4.1.4874.2.2.12.1.2.2.1
IP addressing information for one of this entity's IP network interfaces. This interface could be either numbered or unnumbered. The following objects correspond to (read-only) counterparts in the IP-MIB ipAddrTable: usdIpAdEntAddr usdIpAdEntIfIndex usdIpAdEntNetMask usdIpAdEntBcastAddr usdIpAdEntReasmMaxSize
Status: current	Access: not-accessible
OBJECT-TYPE
	UsdIpAddrEntry

usdIpAdEntAddr		1.3.6.1.4.1.4874.2.2.12.1.2.2.1.1
The IP address for a numbered IP network interface, if this object's value has the form 'a.b.c.d', where 'a' is nonzero; or, the ifIndex (interpreting the low 24 bits of this value as an integer) of an unnumbered ('address-less') IP interface, if this object's value has the form '0.b.c.d'.
Status: current	Access: not-accessible
OBJECT-TYPE
	UsdIpAddrLessIf

usdIpAdEntIfIndex		1.3.6.1.4.1.4874.2.2.12.1.2.2.1.2
The ifIndex of the network interface to which this entry's IP addressing mode pertains.
Status: current	Access: read-create
OBJECT-TYPE
	InterfaceIndex

usdIpAdEntNetMask		1.3.6.1.4.1.4874.2.2.12.1.2.2.1.3
The IP subnet mask associated with the IP address of this entry. The network and host bit fields of the mask are filled with 1's and 0's, respectively. If this entry represents an unnumbered IP interface, this object should have a value of all ones.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

usdIpAdEntBcastAddr		1.3.6.1.4.1.4874.2.2.12.1.2.2.1.4
The value of the least-significant bit in the IP broadcast address used for sending datagrams on the IP network interface associated with this entry. For example, when the Internet standard all-ones broadcast address is used, the value will be 1. This value applies to both the subnet and network broadcasts addresses used by the entity on this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..1

usdIpAdEntReasmMaxSize		1.3.6.1.4.1.4874.2.2.12.1.2.2.1.5
The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

usdIpAdEntRowStatus		1.3.6.1.4.1.4874.2.2.12.1.2.2.1.6
Controls the creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create entries for both numbered and unnumbered IP interfaces, the following entry objects MUST be explicitly configured: usdIpAdEntRowStatus usdIpAdEntIfIndex To create an entry for a numbered IP interface, the following conditions must also hold: To create an entry for an unnumbered IP interface, the following conditions must also hold: usdIpAdEntUnnumLoopbackIfIndex must be configured with a nonzero ifIndex value of an IP loopback interface.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

usdIpAdEntAdminStatus		1.3.6.1.4.1.4874.2.2.12.1.2.2.1.7
Enable/disable operation of IP on this IP network interface.
Status: current	Access: read-create
OBJECT-TYPE
	UsdEnable

usdIpAdEntArpRspEnable		1.3.6.1.4.1.4874.2.2.12.1.2.2.1.8
Enable/disable ARP response on this IP network interface.
Status: current	Access: read-create
OBJECT-TYPE
	UsdEnable

usdIpAdEntProxyArpRspEnable		1.3.6.1.4.1.4874.2.2.12.1.2.2.1.9
Enable/disable proxy ARP response on this IP network interface.
Status: current	Access: read-create
OBJECT-TYPE
	UsdEnable

usdIpAdEntIgmpEnable		1.3.6.1.4.1.4874.2.2.12.1.2.2.1.10
Enable/disable IGMP operation on this IP network interface.
Status: deprecated	Access: read-create
OBJECT-TYPE
	UsdEnable

usdIpAdEntDirectedBcastEnable		1.3.6.1.4.1.4874.2.2.12.1.2.2.1.11
Enable/disable forwarding of directed broadcasts on this IP network interface.
Status: current	Access: read-create
OBJECT-TYPE
	UsdEnable

usdIpAdEntIcmpRedirectEnable		1.3.6.1.4.1.4874.2.2.12.1.2.2.1.12
Enable/disable transmission of ICMP Redirect messages on this IP network interface.
Status: current	Access: read-create
OBJECT-TYPE
	UsdEnable

usdIpAdEntIcmpMaskReplyEnable		1.3.6.1.4.1.4874.2.2.12.1.2.2.1.13
Enable/disable transmission of ICMP Mask Reply messages on this IP network interface.
Status: current	Access: read-create
OBJECT-TYPE
	UsdEnable

usdIpAdEntIcmpUnreachEnable		1.3.6.1.4.1.4874.2.2.12.1.2.2.1.14
Enable/disable transmission of ICMP Unreachable messages on this IP network interface.
Status: current	Access: read-create
OBJECT-TYPE
	UsdEnable

usdIpAdEntMtu		1.3.6.1.4.1.4874.2.2.12.1.2.2.1.15
The configured MTU size for this IP network interface. If set to zero, the default MTU size, as determined by the underlying network media, is used.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..65535

usdIpAdEntUnnumLoopbackIfIndex		1.3.6.1.4.1.4874.2.2.12.1.2.2.1.16
For unnumbered interfaces, the ifIndex of the IP loopback interface whose IP address is used as the source IP address for IP packets transmitted on the unnumbered network. For numbered interfaces, this object has a value of zero.
Status: current	Access: read-create
OBJECT-TYPE
	InterfaceIndexOrZero

usdIpAdEntIrdpEnable		1.3.6.1.4.1.4874.2.2.12.1.2.2.1.17
Controls whether ICMP Router Discovery Protocol operation is permitted to be sent on this network.
Status: current	Access: read-create
OBJECT-TYPE
	UsdEnable

usdIpAdEntAccessRouteEnable		1.3.6.1.4.1.4874.2.2.12.1.2.2.1.18
If enabled, then establishment/loss of a point-to-point network connection causes a host route for the remote host to be created/deleted automatically.
Status: current	Access: read-create
OBJECT-TYPE
	UsdEnable

usdIpAdEntAccessRouteHost		1.3.6.1.4.1.4874.2.2.12.1.2.2.1.19
If an access route has been established, the IP address of the remote host is reported by this object; otherwise, this object contains the value 0.0.0.0.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

usdIpAdEntIsSecondary		1.3.6.1.4.1.4874.2.2.12.1.2.2.1.20
If enabled, then the IP address corresponding to this entry is a secondary address. If disabled, then the IP address corresponding to this entry is te primary address.
Status: current	Access: read-create
OBJECT-TYPE
	UsdEnable

usdIpRouteGlobals		1.3.6.1.4.1.4874.2.2.12.1.3.1
OBJECT IDENTIFIER

usdIpRouteLimit		1.3.6.1.4.1.4874.2.2.12.1.3.1.1
Maximum number of IP routes maintained by this entity. Setting a value lower than the current number of routes prevents additional routes from being learned or configured, but does not cause existing excess routes to be deleted to enforce the new limit.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

usdIpRouteStaticTable		1.3.6.1.4.1.4874.2.2.12.1.3.2
Table of static routes configured on this entity. The object definitions and indexing for this table are chosen to closely align with the IP-FORWARD-MIB's ipCidrRouteTable. This table serves three purposes: 1. Provide the means for configuring static routes. 2. Provide an efficient view of static routes (otherwise they must be observed by traversing the entire routing table). 3. Provide view of static routes configured on network interfaces that are currently inactive. (In this implementation, static routes configured on inactive interfaces are not visible in the routing table.)
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		UsdIpRouteStaticEntry

usdIpRouteStaticEntry		1.3.6.1.4.1.4874.2.2.12.1.3.2.1
A static route.
Status: current	Access: not-accessible
OBJECT-TYPE
	UsdIpRouteStaticEntry

usdIpRouteStaticDest		1.3.6.1.4.1.4874.2.2.12.1.3.2.1.1
The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the usdIpRouteStaticMask object is not equal to x.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

usdIpRouteStaticMask		1.3.6.1.4.1.4874.2.2.12.1.3.2.1.2
Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the usdIpRouteStaticDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the usdIpRouteStaticMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the usdIpRouteStaticDest object is not equal to usdIpRouteStaticDest.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

usdIpRouteStaticPref		1.3.6.1.4.1.4874.2.2.12.1.3.2.1.3
The preference of this static route. Higher values correspond to higher preference. A static route with preference of zero will never be installed as an active route.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..255

usdIpRouteStaticNextHop		1.3.6.1.4.1.4874.2.2.12.1.3.2.1.4
The address of the next hop toward the destination.
Status: current	Access: read-only
OBJECT-TYPE
	UsdIpAddrLessIf

usdIpRouteStaticRowStatus		1.3.6.1.4.1.4874.2.2.12.1.3.2.1.5
The row status variable, used according to row installation and removal conventions.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

usdIpRouteStaticIfIndex		1.3.6.1.4.1.4874.2.2.12.1.3.2.1.6
The ifIndex value which identifies the local interface through which the next hop of this route should be reached. A value of zero means the router should automatically determine the interface through which the specified next-hop address is reached. An implementation may disallow non-zero values from being configured.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

usdIpRouteStaticStatus		1.3.6.1.4.1.4874.2.2.12.1.3.2.1.7
The operational status of this static route. active(0) indicates this route is currently being used to reach the specified destination. inactive(1) indicates this route is considered valid, but currently is superseded by another routing table entry for the destination, having a higher preference value. incomplete(2) indicates this route entry contains information that is incomplete, or is inconsistent with other system configuration (for example, the interface specified in usdIpRouteStaticIfIndex does not exist).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	active(0), inactive(1), incomplete(2)

usdIpRouteStaticNextHopAS		1.3.6.1.4.1.4874.2.2.12.1.3.2.1.8
The Autonomous System Number of the Next Hop. The semantics of this object are determined by the routing-protocol specified in the route's ipCidrRouteProto value. When this object is unknown or not relevant its value should be set to zero.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

usdIpRouteStaticMetric		1.3.6.1.4.1.4874.2.2.12.1.3.2.1.9
The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipCidrRouteProto value. If this metric is not used, its value should be set to -1.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

usdIpRouteStaticTag		1.3.6.1.4.1.4874.2.2.12.1.3.2.1.10
A tag value for this static route.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

usdIpCidrRouteTable		1.3.6.1.4.1.4874.2.2.12.1.3.3
Table of routes active on this entity. This table is an augmentation of the IP-FORWARD-MIB's ipCidrRouteTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		UsdIpCidrRouteEntry

usdIpCidrRouteEntry		1.3.6.1.4.1.4874.2.2.12.1.3.3.1
Additional attributes of an active route.
Status: current	Access: not-accessible
OBJECT-TYPE
	UsdIpCidrRouteEntry

usdIpCidrRoutePref		1.3.6.1.4.1.4874.2.2.12.1.3.3.1.1
The preference of this route. Higher values correspond to higher preference.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..255

usdIpCidrRouteArea		1.3.6.1.4.1.4874.2.2.12.1.3.3.1.2
The Area to which this route pertains. A value of 0.0.0.0 indicates no area is identified.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

usdIpCidrRouteTag		1.3.6.1.4.1.4874.2.2.12.1.3.3.1.3
A tag value for this route.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

usdIpConformance		1.3.6.1.4.1.4874.2.2.12.4
OBJECT IDENTIFIER

usdIpCompliances		1.3.6.1.4.1.4874.2.2.12.4.1
OBJECT IDENTIFIER

usdIpGroups		1.3.6.1.4.1.4874.2.2.12.4.2
OBJECT IDENTIFIER

usdIpCompliance		1.3.6.1.4.1.4874.2.2.12.4.1.1
Obsolete compliance statement for entities which implement the Unisphere IP MIB. This statement became obsolete when the IP interface and IP address groups changed and the global objects were added.
Status: obsolete	Access: read-only
MODULE-COMPLIANCE

usdIpCompliance2		1.3.6.1.4.1.4874.2.2.12.4.1.2
Obsolete compliance statement for entities which implement the Unisphere IP MIB. This statement became obsolete when the usdIpIfAssocTable was added.
Status: obsolete	Access: read-only
MODULE-COMPLIANCE

usdIpCompliance3		1.3.6.1.4.1.4874.2.2.12.4.1.3
Obsolete compliance statement for entities which implement the Unisphere IP MIB. This statement became obsolete when the QoS related objects were obsoleted.
Status: obsolete	Access: read-only
MODULE-COMPLIANCE

usdIpCompliance4		1.3.6.1.4.1.4874.2.2.12.4.1.4
The compliance statement for entities which implement the Unisphere IP MIB.
Status: current	Access: read-only
MODULE-COMPLIANCE

usdIpInterfaceGroup		1.3.6.1.4.1.4874.2.2.12.4.2.1
Obsolete collection of objects for managing IP interface capabilities in a Unisphere product. This group became obsolete when new objects were added to the usdIpIfTable and the usdIpIfStatsTable.
Status: obsolete	Access: read-only
OBJECT-GROUP

usdIpAddressGroup		1.3.6.1.4.1.4874.2.2.12.4.2.2
Obsolete collection of objects for managing IP address capabilities in a Unisphere product. This group became obsolete when usdIpAdEntIgmpEnable was deprecated and usdIpAdEntIsSecondary was added.
Status: obsolete	Access: read-only
OBJECT-GROUP

usdIpRouteGroup		1.3.6.1.4.1.4874.2.2.12.4.2.3
A collection of objects for managing IP routing capabilities in a Unisphere product.
Status: current	Access: read-only
OBJECT-GROUP

usdIpGlobalGroup		1.3.6.1.4.1.4874.2.2.12.4.2.4
A collection of IP global objects for managing instances of IP in a Unisphere product.
Status: current	Access: read-only
OBJECT-GROUP

usdIpInterfaceGroup2		1.3.6.1.4.1.4874.2.2.12.4.2.5
Obsolete collection of objects for managing IP interface capabilities in a Unisphere product. This group became obsolete when the usdIpIfAssocTable was added.
Status: obsolete	Access: read-only
OBJECT-GROUP

usdIpAddressGroup2		1.3.6.1.4.1.4874.2.2.12.4.2.6
A collection of objects for managing IP address capabilities in a Unisphere product.
Status: current	Access: read-only
OBJECT-GROUP

usdIpInterfaceGroup3		1.3.6.1.4.1.4874.2.2.12.4.2.7
Obsolete collection of objects for managing IP interface capabilities in a Unisphere product. This group became obsolete when the QoS related objects were obsoleted.
Status: obsolete	Access: read-only
OBJECT-GROUP

usdIpInterfaceGroup4		1.3.6.1.4.1.4874.2.2.12.4.2.8
A collection of objects for managing IP interface capabilities in a Unisphere product.
Status: current	Access: read-only
OBJECT-GROUP