UB-INTERNETWORKING-MIB

File: UB-INTERNETWORKING-MIB.mib (23869 bytes)

Imported modules

SNMPv2-TC RFC1155-SMI RFC1213-MIB

Imported symbols

DisplayString mgmt OBJECT-TYPE
NetworkAddress IpAddress Counter
Gauge TimeTicks enterprises
transmission

Defined Types

PlusbusEntry  
SEQUENCE    
  plusbusIndex INTEGER
  plusbusAdminstate INTEGER

PlusbusStatsEntry  
SEQUENCE    
  plusbusStatsIndex INTEGER
  plusbusStatsTxErrors Counter
  plusbusStatsTxlostacks Counter
  plusbusStatstxtimeouts Counter
  plusbusStatsrxerrors Counter
  plusbusStatsrxtimeouts Counter
  plusbusStatsRxFifoUnderflows Counter

UbDnloadOptions  
SEQUENCE    
  dlVersionID INTEGER
  dlMaxLoadAttempts INTEGER
  dlMaxBOOTPAttempts INTEGER
  dlBOOTPRetransTime INTEGER
  dlMaxRARPAttempts INTEGER
  dlRARPRetransTime INTEGER
  dlMaxTFTPAttempts INTEGER
  dlTFTPRetransTime INTEGER

DlBOOTPOptions  
SEQUENCE    
  dlBOOTPOptionTblEntry INTEGER
  dlBOOTPHostName DisplayString

DlBOOTPPorts  
SEQUENCE    
  dlBOOTPPortId INTEGER
  dlBOOTPOptionsRunning INTEGER

DlTFTPOptions  
SEQUENCE    
  dlTFTPOptionTblEntry INTEGER
  dlTFTPServerIpAddr IpAddress
  dlTFTPServerFileName DisplayString

DlTFTPPorts  
SEQUENCE    
  dlTFTPPortId INTEGER
  dlTFTPOptionsRunning INTEGER

DlDefaultTFTPParams  
SEQUENCE    
  dlTFTPDefaultNodeIpAddr IpAddress
  dlTFTPDefaultSubnetMask IpAddress
  dlTFTPDefaultGatewayIpAddr IpAddress

UbBridgeParams  
SEQUENCE    
  ubAgingTime INTEGER
  ubPreForwardingTime INTEGER
  ubAppleTalkSupport INTEGER

UbSystemParams  
SEQUENCE    
  ubBroadcastPktLmt Counter
  ubUnicastPktLmt Counter
  ubQuickReset INTEGER
  ubBasePromCode DisplayString
  ubOpswPromCode DisplayString
  ubDownloadedCode DisplayString

Ubdot1dBasePortEntry  
SEQUENCE    
  ubdot1dBasePort INTEGER
  ubdot1dBasePortBlockedFrames Counter

Ubdot1dProtFiltEntry  
SEQUENCE    
  ubdot1dProtFiltType INTEGER
  ubdot1dProtFiltReceivePort INTEGER
  ubdot1dProtFiltAllowedToGo INTEGER

Defined Values

ubNode 1.3.6.1.4.1.75
OBJECT IDENTIFIER    

ubEquip 1.3.6.1.4.1.75.1
OBJECT IDENTIFIER    

ubInternetworking 1.3.6.1.4.1.75.1.2
OBJECT IDENTIFIER    

ubRISCFddiBrouter 1.3.6.1.4.1.75.1.2.1
OBJECT IDENTIFIER    

ubRISCMPET 1.3.6.1.4.1.75.1.2.2
OBJECT IDENTIFIER    

ubRISCTokenRing 1.3.6.1.4.1.75.1.2.3
OBJECT IDENTIFIER    

ubTrapAttrs 1.3.6.1.4.1.75.3
OBJECT IDENTIFIER    

ubSystem 1.3.6.1.4.1.75.4
OBJECT IDENTIFIER    

ubProduct 1.3.6.1.4.1.75.5
OBJECT IDENTIFIER    

ubExperimental 1.3.6.1.4.1.75.6
OBJECT IDENTIFIER    

ubExpInternetworking 1.3.6.1.4.1.75.6.2
OBJECT IDENTIFIER    

ubInExp1 1.3.6.1.4.1.75.6.2.1
OBJECT IDENTIFIER    

ubExtensions 1.3.6.1.4.1.75.7
OBJECT IDENTIFIER    

ubExtInternetworking 1.3.6.1.4.1.75.2
OBJECT IDENTIFIER    

ubInExt1 1.3.6.1.4.1.75.2.1
OBJECT IDENTIFIER    

ubInEnc 1.3.6.1.4.1.75.1.2.1.1
OBJECT IDENTIFIER    

encSlots 1.3.6.1.4.1.75.1.2.1.1.1
Number of slots in the enclosure
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ubInEntity 1.3.6.1.4.1.75.1.2.1.2
OBJECT IDENTIFIER    

ubInCard 1.3.6.1.4.1.75.1.2.1.3
OBJECT IDENTIFIER    

controlUb1 1.3.6.1.4.1.75.1.2.1.3.1
OBJECT IDENTIFIER    

login 1.3.6.1.4.1.75.1.2.1.3.1.1
ASCII string with the following (case sensitive) format: CommunityString:Password
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

configurationUb1 1.3.6.1.4.1.75.1.2.1.3.2
OBJECT IDENTIFIER    

slotNum 1.3.6.1.4.1.75.1.2.1.3.2.1
Slot Number of this card
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

qeContentionOwner 1.3.6.1.4.1.75.1.2.1.3.2.2
Owner of QE Contention in this enclosure
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ubInPort 1.3.6.1.4.1.75.1.2.1.4
OBJECT IDENTIFIER    

plusbus 1.3.6.1.4.1.75.1.2.1.4.1
OBJECT IDENTIFIER    

plusbusTable 1.3.6.1.4.1.75.1.2.1.4.1.1
Status information and control variables for a collection of ethernet-like interfaces attached to a particular system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PlusbusEntry

plusbusEntry 1.3.6.1.4.1.75.1.2.1.4.1.1.1
Status information and control variables for a plus bus interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PlusbusEntry  

plusbusIndex 1.3.6.1.4.1.75.1.2.1.4.1.1.1.1
An index value that uniquely identifies an interface to the plus bus. The interface identified by a particular value of this INDEX is the same interface as identified by the same value of ifIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

plusbusAdminstate 1.3.6.1.4.1.75.1.2.1.4.1.1.1.2
The state variable for a particular interface The value disabled(3) signifies that transmission and reception on the plus bus is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

plusbusAccess 1.3.6.1.4.1.75.1.2.1.4.1.1.1.3
Information configured into the bridge by (local or network) management specifying the set of cards from which frames may NOT be accepted via the plusbus. Each octet within the value of this object specifies a set of eight cards, with the first octet specifying slots 1 through 8, the second octet specifying slots 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered card, and the least significant bit represents the highest numbered card. Thus, each card of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that card is included in the set of cards; the card is not included if its bit has a value of '0'. (Note that the setting of the bit corresponding to the card being queried is irrelevant.)
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

plusbusStatsTable 1.3.6.1.4.1.75.1.2.1.4.1.2
Statistics for a collection of plus bus interfaces attached to a particular system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PlusbusStatsEntry

plusbusStatsEntry 1.3.6.1.4.1.75.1.2.1.4.1.2.1
Statistics for a particular interface to the plus bus.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PlusbusStatsEntry  

plusbusStatsIndex 1.3.6.1.4.1.75.1.2.1.4.1.2.1.1
An index value that uniquely identifies an interface to the plus bus. The interface identified by a particular value of this INDEX is the same interface as identified by the same value of ifIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

plusbusStatsTxErrors 1.3.6.1.4.1.75.1.2.1.4.1.2.1.2
A count of negative acknowledgements received on transmission.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

plusbusStatsTxlostacks 1.3.6.1.4.1.75.1.2.1.4.1.2.1.3
A count of acknowledgements not received on transmission.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

plusbusStatsTxtimeouts 1.3.6.1.4.1.75.1.2.1.4.1.2.1.4
A count of bus timeouts that occurred during transmissions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

plusbusStatsRxErrors 1.3.6.1.4.1.75.1.2.1.4.1.2.1.5
A count of frames received with CRC or frame length errors
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

plusbusStatsRxtimeouts 1.3.6.1.4.1.75.1.2.1.4.1.2.1.6
A count of bus timeouts that occurred during frame reception.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

plusbusStatsclocklosses 1.3.6.1.4.1.75.1.2.1.4.1.2.1.7
A count of plusbus clock losses-detected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rxFifoUnderflows 1.3.6.1.4.1.75.1.2.1.4.1.2.1.8
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ubNVM 1.3.6.1.4.1.75.1.2.1.5
OBJECT IDENTIFIER    

ubDownloader 1.3.6.1.4.1.75.1.2.1.5.1
OBJECT IDENTIFIER    

ubOptions 1.3.6.1.4.1.75.1.2.1.5.1.1
OBJECT IDENTIFIER    

ubBOOTP 1.3.6.1.4.1.75.1.2.1.5.1.2
OBJECT IDENTIFIER    

ubTFTP 1.3.6.1.4.1.75.1.2.1.5.1.3
OBJECT IDENTIFIER    

ubDefaults 1.3.6.1.4.1.75.1.2.1.5.1.4
OBJECT IDENTIFIER    

ubDnloadOptions 1.3.6.1.4.1.75.1.2.1.5.1.1.1
Download parameters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  UbDnloadOptions  

dlVersionID 1.3.6.1.4.1.75.1.2.1.5.1.1.1.1
Version number of load option file to be downloaded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

dlMaxLoadAttempts 1.3.6.1.4.1.75.1.2.1.5.1.1.1.2
Maximum number of load attempts before PROM bridge becomes operational.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

dlMaxBOOTPAttempts 1.3.6.1.4.1.75.1.2.1.5.1.1.1.3
Maximum number of BootP attempts before trying Rarp instead.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

dlBOOTPRetransTime 1.3.6.1.4.1.75.1.2.1.5.1.1.1.4
The retransmission time between BootP attempts.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

dlMaxRARPAttempts 1.3.6.1.4.1.75.1.2.1.5.1.1.1.5
Maximum number of Rarp attempts before continuing with TFTP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

dlRARPRetransTime 1.3.6.1.4.1.75.1.2.1.5.1.1.1.6
The retransmission time between RARP attempts.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

dlMaxTFTPAttempts 1.3.6.1.4.1.75.1.2.1.5.1.1.1.7
The maximum number of times to attempt TFTP download before initiating the PROM bridge.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

dlTFTPRetransTime 1.3.6.1.4.1.75.1.2.1.5.1.1.1.8
The retransmission time between TFTP attempts.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

dlBOOTPOptionsTbl 1.3.6.1.4.1.75.1.2.1.5.1.2.1
BootP options table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DlBOOTPOptions

dlBOOTPOptionsEntry 1.3.6.1.4.1.75.1.2.1.5.1.2.1.1
BootP options table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DlBOOTPOptions  

dlBOOTPOptionTblEntry 1.3.6.1.4.1.75.1.2.1.5.1.2.1.1.1
The number of entries in the ubBootPOptionsTbl.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..3  

dlBOOTPHostName 1.3.6.1.4.1.75.1.2.1.5.1.2.1.1.2
Host name of the card for this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

dlBOOTPPortAssignTbl 1.3.6.1.4.1.75.1.2.1.5.1.2.2
BootP Port Assignment Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DlBOOTPPorts

dlBOOTPPortAssignEntry 1.3.6.1.4.1.75.1.2.1.5.1.2.2.1
BOOTP Port assignment entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DlBOOTPPorts  

dlBOOTPPortId 1.3.6.1.4.1.75.1.2.1.5.1.2.2.1.1
Id of port on which BootP transmissions can be sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER plusbus(1), qe(2), fddi(3)  

dlBOOTPOptionsRunning 1.3.6.1.4.1.75.1.2.1.5.1.2.2.1.2
The options being run by this Port ID. This is bit mapped
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), opt-1(2), opt-2(3), opts-1-2(4), opt-3(5), opts-1-3(6), opts-2-3(7), opts-1-2-3(8)  

dlTFTPOptionsTbl 1.3.6.1.4.1.75.1.2.1.5.1.3.1
TFTP options table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DlTFTPOptions

dlTFTPOptionsEntry 1.3.6.1.4.1.75.1.2.1.5.1.3.1.1
TFTP options table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DlTFTPOptions  

dlTFTPOptionTblEntry 1.3.6.1.4.1.75.1.2.1.5.1.3.1.1.1
The number of entries in the ubTFTPOptionsTbl.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..3  

dlTFTPServerIpAddr 1.3.6.1.4.1.75.1.2.1.5.1.3.1.1.2
Address of TFTP server located out this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

dlTFTPServerFileName 1.3.6.1.4.1.75.1.2.1.5.1.3.1.1.3
Path name of Load Information File on download server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

dlTFTPPortAssignTbl 1.3.6.1.4.1.75.1.2.1.5.1.3.2
TFTP options table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DlTFTPPorts

dlTFTPPortAssignEntry 1.3.6.1.4.1.75.1.2.1.5.1.3.2.1
TFTP options table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DlTFTPPorts  

dlTFTPPortId 1.3.6.1.4.1.75.1.2.1.5.1.3.2.1.1
Id of port on which TFTP transmissions can be sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER plusbus(1), qe(2), fddi(3)  

dlTFTPOptionsRunning 1.3.6.1.4.1.75.1.2.1.5.1.3.2.1.2
Bit-Mapping of Options that can be run on a given Port ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), opt-1(2), opt-2(3), opts-1-2(4), opt-3(5), opts-1-3(6), opts-2-3(7), opts-1-2-3(8)  

dlDefaultTFTPParams 1.3.6.1.4.1.75.1.2.1.5.1.4.1
Default TFTP parameters for a device that fails BOOTP.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DlDefaultTFTPParams  

dlTFTPDefaultNodeIpAddr 1.3.6.1.4.1.75.1.2.1.5.1.4.1.1
TFTP server default address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

dlTFTPDefaultSubnetMask 1.3.6.1.4.1.75.1.2.1.5.1.4.1.2
TFTP server default subnet mask.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

dlTFTPDefaultGatewayIpAddr 1.3.6.1.4.1.75.1.2.1.5.1.4.1.3
Path name of Load Information File on default TFTP server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ubBridgeParams 1.3.6.1.4.1.75.1.2.1.5.2
Bridge parameters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  UbBridgeParams  

ubAgingTime 1.3.6.1.4.1.75.1.2.1.5.2.1
The timeout period in seconds for learning addresses on a segment before bridge will forward packets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ubPreForwardingTime 1.3.6.1.4.1.75.1.2.1.5.2.2
The timeout period in seconds for learning addresses on a segment before bridge will forward packets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..300  

ubAppleTalkSupport 1.3.6.1.4.1.75.1.2.1.5.2.3
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER phase2(1), phase1(2)  

ubSystemParams 1.3.6.1.4.1.75.1.2.1.5.3
Software Versions
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  UbSystemParams  

ubBroadcastPktLmt 1.3.6.1.4.1.75.1.2.1.5.3.1
Maximum number of broadcast packets that can be placed on the QE bus per second.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

ubUnicastPktLmt 1.3.6.1.4.1.75.1.2.1.5.3.2
Maximum number of unicast packets that can be placed on the QE bus per second.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

ubQuickReset 1.3.6.1.4.1.75.1.2.1.5.3.3
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

ubBasePromCode 1.3.6.1.4.1.75.1.2.1.5.3.4
Code version number of the Base Prom (Prom 1)
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

ubOpswPromCode 1.3.6.1.4.1.75.1.2.1.5.3.5
Code version number of the Operational Software Prom (Prom 2)
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

ubDownloadedCode 1.3.6.1.4.1.75.1.2.1.5.3.6
Code version of the Downloaded code running.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

ubdot1dExt 1.3.6.1.4.1.75.2.1.1
OBJECT IDENTIFIER    

ubdot1dBaseExt 1.3.6.1.4.1.75.2.1.1.1
OBJECT IDENTIFIER    

ubdot1dAdminState 1.3.6.1.4.1.75.2.1.1.1.1
Administrative state of bridging. If state is disabled, no bridging will be performed, regardless of any filtering specified in the protocol filter table or in the forwarding database even if the administrative state of all routing protocols is disabled
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ubdot1dBasePortTable 1.3.6.1.4.1.75.2.1.1.1.2
Widening of 'standard' dot1dBasePort table Entries are manipulated in conjunction with operations in the standard table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ubdot1dBasePortEntry

ubdot1dBasePortEntry 1.3.6.1.4.1.75.2.1.1.1.2.1
A list of information for each port of the bridge.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ubdot1dBasePortEntry  

ubdot1dBasePort 1.3.6.1.4.1.75.2.1.1.1.2.1.1
The port number of the port for which this entry contains bridge management information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ubdot1dBasePortBlockedFrames 1.3.6.1.4.1.75.2.1.1.1.2.1.2
The number of frames discarded by this port due to an adminstrative request to block frames of a particular protocol type(s).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ubdot1dProtocolFilterTable 1.3.6.1.4.1.75.2.1.1.2
A table containing filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from specific ports and of specific protocol types are allowed to be forwarded. The value of zero in this table as the port number from which frames with a specific destination address are received, is used to specify all ports for which there is no specific entry in this table for that particular protocol type. Entries are valid for unicast and for group/broadcast addresses.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ubdot1dProtFiltEntry

ubdot1dProtFiltEntry 1.3.6.1.4.1.75.2.1.1.2.1
Filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from a specific port and of a particular protocol type are allowed to be forwarded.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ubdot1dProtFiltEntry  

ubdot1dProtFiltType 1.3.6.1.4.1.75.2.1.1.2.1.1
The protocol type in a frame to which this entry's filtering information applies.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unknown(2)  

ubdot1dProtFiltReceivePort 1.3.6.1.4.1.75.2.1.1.2.1.2
Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of zero indicates that this entry applies on all ports of the bridge for which there is no other applicable entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ubdot1dProtFiltAllowedToGoTo 1.3.6.1.4.1.75.2.1.1.2.1.3
The set of ports to which frames received from a specific port with a specific protocol type, are allowed to be forwarded. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. (Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant.)
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING