TPLINK-PORTLOOPBACKDETECTION-MIB

File: TPLINK-PORTLOOPBACKDETECTION-MIB.mib (6673 bytes)

Imported modules

SNMPv2-SMI RFC1213-MIB TPLINK-TC-MIB
SNMPv2-TC TPLINK-MIB

Imported symbols

OBJECT-TYPE MODULE-IDENTITY Counter32
Integer32 OBJECT-IDENTITY NOTIFICATION-TYPE
ifIndex TPRowStatus DisplayString
tplinkMgmt

Defined Types

LOOPBACKDETECTIONCTRLENTRY  
SEQUENCE    
  loopbackDetectionPort OCTET STRING
  loopbackDetectionState INTEGER disable(0), enable(1)
  loopbackDetectionProcessMode INTEGER alert(0), portbased(1)
  loopbackDetectionRecoverMode INTEGER auto(0), manual(1)
  loopbackDetectionLoopState OCTET STRING
  loopbackDetectionBlockState OCTET STRING
  loopbackDetectionLagState OCTET STRING
  loopbackDetectionRecoverPort INTEGER

Defined Values

tplinkLoopbackDetectionMIB 1.3.6.1.4.1.11863.6.80
The config of loopback Detection.
MODULE-IDENTITY    

tplinkLoopbackDetectionMIBObjects 1.3.6.1.4.1.11863.6.80.1
OBJECT IDENTIFIER    

tplinkLoopbackDetectionNotifications 1.3.6.1.4.1.11863.6.80.2
OBJECT IDENTIFIER    

loopbackStatusChange 1.3.6.1.4.1.11863.6.80.2.1
When loopbackDetection is enabled ,A loopback detection notification is sent while port loop status is changed.
Status: current Access: read-write
NOTIFICATION-TYPE    

loopbackDetectionEnable 1.3.6.1.4.1.11863.6.80.1.1
Select Enable/Disable LOOPBACK detection function globally on the Switch. 0. disable 1. enable
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

loopbackDetectionInterval 1.3.6.1.4.1.11863.6.80.1.2
The interval time of loopback detection
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..1000  

loopbackDetectionRecoveryTime 1.3.6.1.4.1.11863.6.80.1.3
The recovery time of loopback detection
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..100  

loopbackDetectionCtrlTable 1.3.6.1.4.1.11863.6.80.1.4
A list of port loopback detection.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LOOPBACKDETECTIONCTRLENTRY

loopbackDetectionCtrlEntry 1.3.6.1.4.1.11863.6.80.1.4.1
The entry of the port loopback detection list .
Status: current Access: not-accessible
OBJECT-TYPE    
  LOOPBACKDETECTIONCTRLENTRY  

loopbackDetectionPort 1.3.6.1.4.1.11863.6.80.1.4.1.1
Display port number
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

loopbackDetectionState 1.3.6.1.4.1.11863.6.80.1.4.1.2
The state of the port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

loopbackDetectionProcessMode 1.3.6.1.4.1.11863.6.80.1.4.1.3
The process mode of the port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER alert(0), portbased(1)  

loopbackDetectionRecoverMode 1.3.6.1.4.1.11863.6.80.1.4.1.4
The recover mode of the port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER auto(0), manual(1)  

loopbackDetectionLoopState 1.3.6.1.4.1.11863.6.80.1.4.1.5
The loop state of the port.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

loopbackDetectionBlockState 1.3.6.1.4.1.11863.6.80.1.4.1.6
The block state of the port.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

loopbackDetectionLagState 1.3.6.1.4.1.11863.6.80.1.4.1.7
The LAG of the port.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

loopbackDetectionRecoverPort 1.3.6.1.4.1.11863.6.80.1.4.1.8
You can recover the block port with this.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER