TPLINK-8021X-MIB

File: TPLINK-8021X-MIB.mib (11832 bytes)

Imported modules

SNMPv2-SMI TPLINK-MIB RFC1213-MIB
SNMPv2-TC

Imported symbols

MODULE-IDENTITY OBJECT-TYPE IpAddress
tplinkMgmt ifIndex DisplayString

Defined Types

TP8021XPORTCONFIGENTRY  
SEQUENCE    
  tp8021xPortConfigPortIndex DisplayString
  tp8021xPortConfigEnable INTEGER
  tp8021xPortConfigGuestVlanEnable INTEGER
  tp8021xPortConfigControlMode INTEGER
  tp8021xPortConfigControlType INTEGER
  tp8021xPortConfigAuthState INTEGER
  tp8021xPortConfigPortLag OCTET STRING

Defined Values

tplink8021xMIB 1.3.6.1.4.1.11863.6.31
Private MIB for 802.1x configuration.
MODULE-IDENTITY    

tplink8021xMIBObjects 1.3.6.1.4.1.11863.6.31.1
OBJECT IDENTIFIER    

tplink8021xNotifications 1.3.6.1.4.1.11863.6.31.2
OBJECT IDENTIFIER    

tp8021xGlobalConfig 1.3.6.1.4.1.11863.6.31.1.1
OBJECT IDENTIFIER    

tp8021xGlobalEnable 1.3.6.1.4.1.11863.6.31.1.1.1
0. disable 1. enable Enable/Disable the 802.1X function.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

tp8021xAuthMode 1.3.6.1.4.1.11863.6.31.1.1.2
Select the Authentication Method 0. pap: IEEE 802.1X authentication system uses extensible authentication protocol (EAP) to exchange information between the switch and the client. The transmission of EAP packets is terminated at the switch and the EAP packets are converted to the other protocol (such as RADIUS) packets for transmission. 1. eap: IEEE 802.1X authentication system uses extensible authentication protocol (EAP) to exchange information between the switch and the client. The EAP protocol packets with authentication data can be encapsulated in the advanced protocol (such as RADIUS) packets to be transmitted to the authentication server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER pap(0), eap(1)  

tp8021xHandshake 1.3.6.1.4.1.11863.6.31.1.1.3
0. disable 1. enable Enable/Disable the handshake feature.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

tp8021xGuestVlanEnable 1.3.6.1.4.1.11863.6.31.1.1.4
0. disable 1. enable Enable/Disable the Guest VLAN feature.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

tp8021xGuestVlanID 1.3.6.1.4.1.11863.6.31.1.1.5
Enter your desired VLAN ID to enable the Guest VLAN feature. The supplicants in the Guest VLAN can access the specified network source.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

tp8021xQuietEnable 1.3.6.1.4.1.11863.6.31.1.1.6
0. disable 1. enable Enable/Disable the Quiet timer.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

tp8021xQuietPeriod 1.3.6.1.4.1.11863.6.31.1.1.7
Specify a value for Quiet Period. Once the supplicant failed to the 802.1X Authentication, then the switch will not respond to the authentication request from the same supplicant during the Quiet Period. (1-999 second)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

tp8021xRetryTimes 1.3.6.1.4.1.11863.6.31.1.1.8
Specify the maximum transfer times of the repeated authentication request.(1-9)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

tp8021xSupplicantTimeOut 1.3.6.1.4.1.11863.6.31.1.1.9
Specify the maximum time for the switch to wait for the response from supplicant before resending a request to the supplicant. (1-9 second)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

tp8021xServerTimeOut 1.3.6.1.4.1.11863.6.31.1.1.10
Specify the maximum time for the switch to wait for the response from authentication server before resending a request to the authentication server. (1-9 second)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

tp8021xAuthPrimaryIP 1.3.6.1.4.1.11863.6.31.1.1.11
Enter the IP address of the authentication server.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

tp8021xAuthSecondaryIP 1.3.6.1.4.1.11863.6.31.1.1.12
Enter the IP address of the alternate authentication server.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

tp8021xServerAuthPort 1.3.6.1.4.1.11863.6.31.1.1.13
Set the UDP port of authentication server(s). The default port is 1812(1-65535)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

tp8021xServerAuthKey 1.3.6.1.4.1.11863.6.31.1.1.14
Set the shared password for the switch and the authentication servers to exchange messages.(0-31 characters).
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

tp8021xAcctEnable 1.3.6.1.4.1.11863.6.31.1.1.15
0. disable 1. enable Enable/Disable the accounting feature.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

tp8021xAcctPrimaryIP 1.3.6.1.4.1.11863.6.31.1.1.16
Enter the IP address of the accounting server.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

tp8021xAcctSecondaryIP 1.3.6.1.4.1.11863.6.31.1.1.17
Enter the IP address of the alternate accounting server.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

tp8021xAcctPort 1.3.6.1.4.1.11863.6.31.1.1.18
Set the UDP port of accounting server(s). The default port is 1813(1-65535)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

tp8021xAcctKey 1.3.6.1.4.1.11863.6.31.1.1.19
Set the shared password for the switch and the accounting servers to exchange messages. (0-31 characters).
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

tp8021xPortConfig 1.3.6.1.4.1.11863.6.31.1.2
OBJECT IDENTIFIER    

tp8021xPortConfigTable 1.3.6.1.4.1.11863.6.31.1.2.1
A list of 8021x port config entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TP8021XPORTCONFIGENTRY

tp8021xPortConfigEntry 1.3.6.1.4.1.11863.6.31.1.2.1.1
An entry contains of the information of 8021x port config. Here you can configure the ports for the 802.1X authentication.
Status: current Access: not-accessible
OBJECT-TYPE    
  TP8021XPORTCONFIGENTRY  

tp8021xPortConfigPortIndex 1.3.6.1.4.1.11863.6.31.1.2.1.1.1
This object indicates the port number.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

tp8021xPortConfigEnable 1.3.6.1.4.1.11863.6.31.1.2.1.1.2
0. disable 1. enable Select Enable/Disable the 802.1X authentication feature for the port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

tp8021xPortConfigGuestVlanEnable 1.3.6.1.4.1.11863.6.31.1.2.1.1.3
0. disable 1. enable Select Enable/Disable the Guest VLAN feature for the port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

tp8021xPortConfigControlMode 1.3.6.1.4.1.11863.6.31.1.2.1.1.4
Specify the Control Mode for the port. 0. force auth: In this mode, the port can work normally without passing the 802.1X Authentication. 1. force unauth: In this mode, the port is forbidden working for its fixed unauthorized status. 2. auto auth: In this mode, the port will normally work only after passing the 802.1X Authentication.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER forceAuth(0), forceUnAuth(1), autoAuth(2)  

tp8021xPortConfigControlType 1.3.6.1.4.1.11863.6.31.1.2.1.1.5
Specify the Control Type for the port. 0. base of mac: Any client connected to the port should pass the 802.1X Authentication for access. 1. base of port: All the clients connected to the port can access the network on the condition that any one of the clients has passed the 802.1X Authentication.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER macBased(0), portBased(1)  

tp8021xPortConfigAuthState 1.3.6.1.4.1.11863.6.31.1.2.1.1.6
The authentication status of the port. 0. unAuthorized 1. Authorized
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unAuthorized(0), authorized(1)  

tp8021xPortConfigPortLag 1.3.6.1.4.1.11863.6.31.1.2.1.1.7
the lag the port belong to
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)