TOW-OPT-MIB

File: TOW-OPT-MIB.mib (27629 bytes)

Imported modules

RFC1155-SMI RFC-1212

Imported symbols

enterprises OBJECT-TYPE

Defined Types

DisplayString  
OCTET STRING    

Cdx6500TOWCfgEntry  
SEQUENCE    
  cdx6500TowCfgEntryNum INTEGER
  cdx6500TowCfgEntryName DisplayString
  cdx6500TowCfgInt1StartTime DisplayString
  cdx6500TowCfgInt1Duration DisplayString
  cdx6500TowCfgInt1StartDays DisplayString
  cdx6500TowCfgInt2StartTime DisplayString
  cdx6500TowCfgInt2Duration DisplayString
  cdx6500TowCfgInt2StartDays DisplayString
  cdx6500TowCfgInt3StartTime DisplayString
  cdx6500TowCfgInt3Duration DisplayString
  cdx6500TowCfgInt3StartDays DisplayString
  cdx6500TowCfgInt4StartTime DisplayString
  cdx6500TowCfgInt4Duration DisplayString
  cdx6500TowCfgInt4StartDays DisplayString
  cdx6500TowCfgInt5StartTime DisplayString
  cdx6500TowCfgInt5Duration DisplayString
  cdx6500TowCfgInt5StartDays DisplayString
  cdx6500TowCfgInt6StartTime DisplayString
  cdx6500TowCfgInt6Duration DisplayString
  cdx6500TowCfgInt6StartDays DisplayString
  cdx6500TowCfgInt7StartTime DisplayString
  cdx6500TowCfgInt7Duration DisplayString
  cdx6500TowCfgInt7StartDays DisplayString
  cdx6500TowCfgInt8StartTime DisplayString
  cdx6500TowCfgInt8Duration DisplayString
  cdx6500TowCfgInt8StartDays DisplayString
  cdx6500TowCfgInt9StartTime DisplayString
  cdx6500TowCfgInt9Duration DisplayString
  cdx6500TowCfgInt9StartDays DisplayString
  cdx6500TowCfgInt10StartTime DisplayString
  cdx6500TowCfgInt10Duration DisplayString
  cdx6500TowCfgInt10StartDays DisplayString

Defined Values

codex 1.3.6.1.4.1.449
OBJECT IDENTIFIER    

cdxProductSpecific 1.3.6.1.4.1.449.2
OBJECT IDENTIFIER    

cdx6500 1.3.6.1.4.1.449.2.1
OBJECT IDENTIFIER    

cdx6500Configuration 1.3.6.1.4.1.449.2.1.2
OBJECT IDENTIFIER    

cdx6500CfgGeneralGroup 1.3.6.1.4.1.449.2.1.2.2
OBJECT IDENTIFIER    

cdx6500TOWCfgTable 1.3.6.1.4.1.449.2.1.2.2.22
This table contains the configuration parameters for TOW.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cdx6500TOWCfgEntry

cdx6500TOWCfgEntry 1.3.6.1.4.1.449.2.1.2.2.22.1
Configuration parameters for each TOW entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cdx6500TOWCfgEntry  

cdx6500TowCfgEntryNum 1.3.6.1.4.1.449.2.1.2.2.22.1.1
Entry number used to reference this table record.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..10  

cdx6500TowCfgEntryName 1.3.6.1.4.1.449.2.1.2.2.22.1.2
Range = 0-20 alphanumeric characters, use the space character to blank field.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

cdx6500TowCfgInt1StartTime 1.3.6.1.4.1.449.2.1.2.2.22.1.3
This parameter specifies the start time of the interval. Format : hh:mm hh : Is the start hour , with range 00 to 23. mm : Is the start minute, with range 00 to 59. This parameter specifies the start time of the interval. All the intervals configured in an entry do not overlap. Intervals configured in different entries can overlap.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(5)  

cdx6500TowCfgInt1Duration 1.3.6.1.4.1.449.2.1.2.2.22.1.4
Format : dd:hh:mm dd : Days . Range 00 to 06. hh : Hours. Range 00 to 23. mm : minutes. Range 00 to 59. This parameter specifies the duration of the interval starting from the start time configured. To check if the end time of the interval is as desired, check the Time of Week intervals under the statistics menu.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(8)  

cdx6500TowCfgInt1StartDays 1.3.6.1.4.1.449.2.1.2.2.22.1.5
DDD : This specifies the day. Range is one of MON TUE WED THU FRI SAT SUN. DDD+DDD+DDD : This specifies that the interval has to start on each of these days. The `+' operator implies AND. A maximum of 7 days can be specified. This parameter specifies the days on which the interval has to be applied. That is, the intervals would start on each of these days.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..27)  

cdx6500TowCfgInt2StartTime 1.3.6.1.4.1.449.2.1.2.2.22.1.6
This parameter specifies the start time of the interval. Format : hh:mm hh : Is the start hour , with range 00 to 23. mm : Is the start minute, with range 00 to 59. This parameter specifies the start time of the interval. All the intervals configured in an entry do not overlap. Intervals configured in different entries can overlap.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(5)  

cdx6500TowCfgInt2Duration 1.3.6.1.4.1.449.2.1.2.2.22.1.7
Format : dd:hh:mm dd : Days . Range 00 to 06. hh : Hours. Range 00 to 23. mm : minutes. Range 00 to 59. This parameter specifies the duration of the interval starting from the start time configured. To check if the end time of the interval is as desired, check the Time of Week intervals under the statistics menu.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(8)  

cdx6500TowCfgInt2StartDays 1.3.6.1.4.1.449.2.1.2.2.22.1.8
DDD : This specifies the day. Range is one of MON TUE WED THU FRI SAT SUN. DDD+DDD+DDD : This specifies that the interval has to start on each of these days. The `+' operator implies AND. A maximum of 7 days can be specified. This parameter specifies the days on which the interval has to be applied. That is, the intervals would start on each of these days.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..27)  

cdx6500TowCfgInt3StartTime 1.3.6.1.4.1.449.2.1.2.2.22.1.9
This parameter specifies the start time of the interval. Format : hh:mm hh : Is the start hour , with range 00 to 23. mm : Is the start minute, with range 00 to 59. This parameter specifies the start time of the interval. All the intervals configured in an entry do not overlap. Intervals configured in different entries can overlap.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(5)  

cdx6500TowCfgInt3Duration 1.3.6.1.4.1.449.2.1.2.2.22.1.10
Format : dd:hh:mm dd : Days . Range 00 to 06. hh : Hours. Range 00 to 23. mm : minutes. Range 00 to 59. This parameter specifies the duration of the interval starting from the start time configured. To check if the end time of the interval is as desired, check the Time of Week intervals under the statistics menu.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(8)  

cdx6500TowCfgInt3StartDays 1.3.6.1.4.1.449.2.1.2.2.22.1.11
DDD : This specifies the day. Range is one of MON TUE WED THU FRI SAT SUN. DDD+DDD+DDD : This specifies that the interval has to start on each of these days. The `+' operator implies AND. A maximum of 7 days can be specified. This parameter specifies the days on which the interval has to be applied. That is, the intervals would start on each of these days.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..27)  

cdx6500TowCfgInt4StartTime 1.3.6.1.4.1.449.2.1.2.2.22.1.12
This parameter specifies the start time of the interval. Format : hh:mm hh : Is the start hour , with range 00 to 23. mm : Is the start minute, with range 00 to 59. This parameter specifies the start time of the interval. All the intervals configured in an entry do not overlap. Intervals configured in different entries can overlap.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(5)  

cdx6500TowCfgInt4Duration 1.3.6.1.4.1.449.2.1.2.2.22.1.13
Format : dd:hh:mm dd : Days . Range 00 to 06. hh : Hours. Range 00 to 23. mm : minutes. Range 00 to 59. This parameter specifies the duration of the interval starting from the start time configured. To check if the end time of the interval is as desired, check the Time of Week intervals under the statistics menu.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(8)  

cdx6500TowCfgInt4StartDays 1.3.6.1.4.1.449.2.1.2.2.22.1.14
DDD : This specifies the day. Range is one of MON TUE WED THU FRI SAT SUN. DDD+DDD+DDD : This specifies that the interval has to start on each of these days. The `+' operator implies AND. A maximum of 7 days can be specified. This parameter specifies the days on which the interval has to be applied. That is, the intervals would start on each of these days.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..27)  

cdx6500TowCfgInt5StartTime 1.3.6.1.4.1.449.2.1.2.2.22.1.15
This parameter specifies the start time of the interval. Format : hh:mm hh : Is the start hour , with range 00 to 23. mm : Is the start minute, with range 00 to 59. This parameter specifies the start time of the interval. All the intervals configured in an entry do not overlap. Intervals configured in different entries can overlap.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(5)  

cdx6500TowCfgInt5Duration 1.3.6.1.4.1.449.2.1.2.2.22.1.16
Format : dd:hh:mm dd : Days . Range 00 to 06. hh : Hours. Range 00 to 23. mm : minutes. Range 00 to 59. This parameter specifies the duration of the interval starting from the start time configured. To check if the end time of the interval is as desired, check the Time of Week intervals under the statistics menu.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(8)  

cdx6500TowCfgInt5StartDays 1.3.6.1.4.1.449.2.1.2.2.22.1.17
DDD : This specifies the day. Range is one of MON TUE WED THU FRI SAT SUN. DDD+DDD+DDD : This specifies that the interval has to start on each of these days. The `+' operator implies AND. A maximum of 7 days can be specified. This parameter specifies the days on which the interval has to be applied. That is, the intervals would start on each of these days.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..27)  

cdx6500TowCfgInt6StartTime 1.3.6.1.4.1.449.2.1.2.2.22.1.18
This parameter specifies the start time of the interval. Format : hh:mm hh : Is the start hour , with range 00 to 23. mm : Is the start minute, with range 00 to 59. This parameter specifies the start time of the interval. All the intervals configured in an entry do not overlap. Intervals configured in different entries can overlap.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(5)  

cdx6500TowCfgInt6Duration 1.3.6.1.4.1.449.2.1.2.2.22.1.19
Format : dd:hh:mm dd : Days . Range 00 to 06. hh : Hours. Range 00 to 23. mm : minutes. Range 00 to 59. This parameter specifies the duration of the interval starting from the start time configured. To check if the end time of the interval is as desired, check the Time of Week intervals under the statistics menu.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(8)  

cdx6500TowCfgInt6StartDays 1.3.6.1.4.1.449.2.1.2.2.22.1.20
DDD : This specifies the day. Range is one of MON TUE WED THU FRI SAT SUN. DDD+DDD+DDD : This specifies that the interval has to start on each of these days. The `+' operator implies AND. A maximum of 7 days can be specified. This parameter specifies the days on which the interval has to be applied. That is, the intervals would start on each of these days.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..27)  

cdx6500TowCfgInt7StartTime 1.3.6.1.4.1.449.2.1.2.2.22.1.21
This parameter specifies the start time of the interval. Format : hh:mm hh : Is the start hour , with range 00 to 23. mm : Is the start minute, with range 00 to 59. This parameter specifies the start time of the interval. All the intervals configured in an entry do not overlap. Intervals configured in different entries can overlap.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(5)  

cdx6500TowCfgInt7Duration 1.3.6.1.4.1.449.2.1.2.2.22.1.22
Format : dd:hh:mm dd : Days . Range 00 to 06. hh : Hours. Range 00 to 23. mm : minutes. Range 00 to 59. This parameter specifies the duration of the interval starting from the start time configured. To check if the end time of the interval is as desired, check the Time of Week intervals under the statistics menu.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(8)  

cdx6500TowCfgInt7StartDays 1.3.6.1.4.1.449.2.1.2.2.22.1.23
DDD : This specifies the day. Range is one of MON TUE WED THU FRI SAT SUN. DDD+DDD+DDD : This specifies that the interval has to start on each of these days. The `+' operator implies AND. A maximum of 7 days can be specified. This parameter specifies the days on which the interval has to be applied. That is, the intervals would start on each of these days.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..27)  

cdx6500TowCfgInt8StartTime 1.3.6.1.4.1.449.2.1.2.2.22.1.24
This parameter specifies the start time of the interval. Format : hh:mm hh : Is the start hour , with range 00 to 23. mm : Is the start minute, with range 00 to 59. This parameter specifies the start time of the interval. All the intervals configured in an entry do not overlap. Intervals configured in different entries can overlap.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(5)  

cdx6500TowCfgInt8Duration 1.3.6.1.4.1.449.2.1.2.2.22.1.25
Format : dd:hh:mm dd : Days . Range 00 to 06. hh : Hours. Range 00 to 23. mm : minutes. Range 00 to 59. This parameter specifies the duration of the interval starting from the start time configured. To check if the end time of the interval is as desired, check the Time of Week intervals under the statistics menu.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(8)  

cdx6500TowCfgInt8StartDays 1.3.6.1.4.1.449.2.1.2.2.22.1.26
DDD : This specifies the day. Range is one of MON TUE WED THU FRI SAT SUN. DDD+DDD+DDD : This specifies that the interval has to start on each of these days. The `+' operator implies AND. A maximum of 7 days can be specified. This parameter specifies the days on which the interval has to be applied. That is, the intervals would start on each of these days.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..27)  

cdx6500TowCfgInt9StartTime 1.3.6.1.4.1.449.2.1.2.2.22.1.27
This parameter specifies the start time of the interval. Format : hh:mm hh : Is the start hour , with range 00 to 23. mm : Is the start minute, with range 00 to 59. This parameter specifies the start time of the interval. All the intervals configured in an entry do not overlap. Intervals configured in different entries can overlap.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(5)  

cdx6500TowCfgInt9Duration 1.3.6.1.4.1.449.2.1.2.2.22.1.28
Format : dd:hh:mm dd : Days . Range 00 to 06. hh : Hours. Range 00 to 23. mm : minutes. Range 00 to 59. This parameter specifies the duration of the interval starting from the start time configured. To check if the end time of the interval is as desired, check the Time of Week intervals under the statistics menu.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(8)  

cdx6500TowCfgInt9StartDays 1.3.6.1.4.1.449.2.1.2.2.22.1.29
DDD : This specifies the day. Range is one of MON TUE WED THU FRI SAT SUN. DDD+DDD+DDD : This specifies that the interval has to start on each of these days. The `+' operator implies AND. A maximum of 7 days can be specified. This parameter specifies the days on which the interval has to be applied. That is, the intervals would start on each of these days.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..27)  

cdx6500TowCfgInt10StartTime 1.3.6.1.4.1.449.2.1.2.2.22.1.30
This parameter specifies the start time of the interval. Format : hh:mm hh : Is the start hour , with range 00 to 23. mm : Is the start minute, with range 00 to 59. This parameter specifies the start time of the interval. All the intervals configured in an entry do not overlap. Intervals configured in different entries can overlap.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(5)  

cdx6500TowCfgInt10Duration 1.3.6.1.4.1.449.2.1.2.2.22.1.31
Format : dd:hh:mm dd : Days . Range 00 to 06. hh : Hours. Range 00 to 23. mm : minutes. Range 00 to 59. This parameter specifies the duration of the interval starting from the start time configured. To check if the end time of the interval is as desired, check the Time of Week intervals under the statistics menu.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(8)  

cdx6500TowCfgInt10StartDays 1.3.6.1.4.1.449.2.1.2.2.22.1.32
DDD : This specifies the day. Range is one of MON TUE WED THU FRI SAT SUN. DDD+DDD+DDD : This specifies that the interval has to start on each of these days. The `+' operator implies AND. A maximum of 7 days can be specified. This parameter specifies the days on which the interval has to be applied. That is, the intervals would start on each of these days.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..27)