TNPP-OPT-MIB
File:
TNPP-OPT-MIB.mib (37720 bytes)
Imported modules
Imported symbols
Defined Types
Cdx6500PPCTTNPPPortEntry |
|
SEQUENCE |
|
|
|
|
tnppPCfgPortNumber |
INTEGER |
|
|
tnppPCfgPortType |
INTEGER |
|
|
tnppPCfgPortSpeed |
INTEGER |
|
|
tnppPCfgCallControl |
INTEGER |
|
|
tnppPCfgCRCOption |
INTEGER |
|
|
tnppPCfgTANControl |
INTEGER |
|
|
tnppPCfgCANReports |
INTEGER |
|
|
tnppPCfgRSCount |
INTEGER |
|
|
tnppPCfgMaxRSCount |
INTEGER |
|
|
tnppPCfgRSSupport |
INTEGER |
|
|
tnppPCfgAutocallMnemonic |
DisplayString |
|
|
tnppPCfgAutocallTimeout |
INTEGER |
|
|
tnppPCfgMaxAutocallAttempt |
INTEGER |
|
|
tnppPCfgProtectionLevel |
INTEGER |
|
|
tnppPCfgReconnTimeout |
INTEGER |
|
|
tnppPCfgMaxReconnAttempt |
INTEGER |
|
|
tnppPCfgElectricalInterfaceType |
INTEGER |
|
|
tnppPCfgV24ElectricalInterfaceOption |
INTEGER |
|
|
tnppPCfgHighSpeedElectricalInterfaceOption |
INTEGER |
|
TNPPPGenStatEntry |
|
SEQUENCE |
|
|
|
|
tnppPGStatPortNumber |
INTEGER |
|
|
tnppPGStatPortType |
INTEGER |
|
|
tnppPGStatPortStatus |
INTEGER |
|
|
tnppPGStatPortSpeed |
INTEGER |
|
|
tnppPGStatPortUtilIn |
INTEGER |
|
|
tnppPGStatPortUtilOut |
INTEGER |
|
|
tnppPGStatParityErrors |
Counter |
|
|
tnppPGStatOverrunErrors |
Counter |
|
|
tnppPGStatFramingErrors |
Counter |
|
|
tnppPGStatLocalDTEState |
INTEGER |
|
|
tnppPGStatRemoteDTEState |
INTEGER |
|
|
tnppPGStatRemotePadQ |
INTEGER |
|
|
tnppPGStatLocalTerminalQ |
INTEGER |
|
|
tnppPGStatReadyQ |
INTEGER |
|
|
tnppPGStatHoldQ |
INTEGER |
|
TNPPPDataSummaryStatEntry |
|
SEQUENCE |
|
|
|
|
tnppPDSStatPortNumber |
INTEGER |
|
|
tnppPDSStatTotalCharIn |
Counter |
|
|
tnppPDSStatTotalCharOut |
Counter |
|
|
tnppPDSStatTotalFramesIn |
Counter |
|
|
tnppPDSStatTotalFramesOut |
Counter |
|
|
tnppPDSStatCharInPerSec |
INTEGER |
|
|
tnppPDSStatCharOutPerSec |
INTEGER |
|
|
tnppPDSStatFramesInPerSec |
INTEGER |
|
|
tnppPDSStatFramesOutPerSec |
INTEGER |
|
TNPPPFrameSummaryStatEntry |
|
SEQUENCE |
|
|
|
|
tnppPFSStatPortNumber |
INTEGER |
|
|
tnppPFSStatLinkState |
INTEGER |
|
|
tnppPFSStatCRCErrors |
Counter |
|
|
tnppPFSStatLinkFramingErrors |
Counter |
|
|
tnppPFSStatProtocolErrors |
Counter |
|
|
tnppPFSStatACKFramesIn |
Counter |
|
|
tnppPFSStatACKFramesOut |
Counter |
|
|
tnppPFSStatNAKFramesIn |
Counter |
|
|
tnppPFSStatNAKFramesOut |
Counter |
|
|
tnppPFSStatRSFramesIn |
Counter |
|
|
tnppPFSStatRSFramesOut |
Counter |
|
|
tnppPFSStatCANFramesIn |
Counter |
|
|
tnppPFSStatCANFramesOut |
Counter |
|
|
tnppPFSStatEOTFramesIn |
Counter |
|
|
tnppPFSStatEOTFramesOut |
Counter |
|
|
tnppPFSStatENQFramesIn |
Counter |
|
|
tnppPFSStatENQFramesOut |
Counter |
|
|
tnppPFSStatDataFramesInPassed |
Counter |
|
|
tnppPFSStatDataFramesOutPassed |
Counter |
|
|
tnppPFSStatDataFramesInDiscarded |
Counter |
|
|
tnppPFSStatDataFramesOutDiscarded |
Counter |
|
Cdx6500ContTNPPPortEntry |
|
SEQUENCE |
|
|
|
|
tnppPContPortNumber |
INTEGER |
|
|
tnppPContPortControl |
INTEGER |
|
Defined Values
codex |
1.3.6.1.4.1.449 |
OBJECT IDENTIFIER |
|
|
|
cdx6500 |
1.3.6.1.4.1.449.2.1 |
OBJECT IDENTIFIER |
|
|
|
cdx6500PPCTTNPPPortEntry |
1.3.6.1.4.1.449.2.1.2.1.1.32.1 |
Entries in the TNPP port configuration table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Cdx6500PPCTTNPPPortEntry |
|
|
tnppPCfgPortNumber |
1.3.6.1.4.1.449.2.1.2.1.1.32.1.1 |
Port Number of the TNPP port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..54 |
|
tnppPCfgPortType |
1.3.6.1.4.1.449.2.1.2.1.1.32.1.2 |
Specifies the type of access protocol for
this port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
tnpp(37) |
|
tnppPCfgPortSpeed |
1.3.6.1.4.1.449.2.1.2.1.1.32.1.3 |
Specifies port speed in bits per second.
speed300 : 300 bits per second.
speed1200 : 1200 bits per second.
speed2400 : 2400 bits per second.
speed4800 : 4800 bits per second.
speed9600 : 9600 bits per second.
speed19200 : 19200 bits per second. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
speed300(3), speed1200(4), speed2400(13), speed4800(14), speed9600(15), speed19200(16) |
|
tnppPCfgCallControl |
1.3.6.1.4.1.449.2.1.2.1.1.32.1.4 |
Specifies the mode for X.25 call generation.
dtr - X.25 call is generated when DTR is up.
Connection type between TNPP PAD and
Paging Terminal is DTR.
dataDrv - X.25 call is generated on incoming data.
Connection type between TNPP PAD and
Paging Terminal is SIMP.
powerOn - X.25 call is generated on Node Boot/Power On.
Connection type between TNPP PAD and
Paging Terminal is SIMP.
nc - Skipped during configuration. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
dtr(2), dataDrv(3), powerOn(4), nc(100) |
|
tnppPCfgCRCOption |
1.3.6.1.4.1.449.2.1.2.1.1.32.1.5 |
Specifies the CRC option.
normal - 2 bytes binary CRC.
transp - 4 bytes ASCII CRC.
nc - Skipped during configuration. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
normal(1), transp(2), nc(100) |
|
tnppPCfgTANControl |
1.3.6.1.4.1.449.2.1.2.1.1.32.1.6 |
Specifies whether to accept control characters(ACK/NAK)
in the frame.
mps2000Mode - Do not accept embedded control characters
in the frame.
unipageMode - Accept embedded control characters
in the frame.
nc - Skipped during configuration. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
mps2000Mode(1), unipageMode(2), nc(100) |
|
tnppPCfgCANReports |
1.3.6.1.4.1.449.2.1.2.1.1.32.1.7 |
Specifies whether to log reports generated by TNPP PAD.
no - Reports generated due to CANcel frame will not
be logged.
yes - Reports generated due to CANcel frame will be
logged which will be controlled by node
parameter.
nc - Skipped during configuration. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
no(1), yes(2), nc(100) |
|
tnppPCfgRSCount |
1.3.6.1.4.1.449.2.1.2.1.1.32.1.8 |
TNPP PAD port will flow control the X.25 channel when
the number of RSed frames on hold remains at or above
the configured value of this parameter.
Specifies the limit for RS support by TNPP PAD. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..10 |
|
tnppPCfgMaxRSCount |
1.3.6.1.4.1.449.2.1.2.1.1.32.1.9 |
TNPP PAD port will stop transmission of any new frame
to the paging terminal if the number of frames on hold
remains above the value of this parameter. Transmission
of control frames and retransmission of RS timed out
frames will continue.
Specifies the maximum number of RS that can be received
before the TNPP PAD stops transmission. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..10 |
|
tnppPCfgAutocallMnemonic |
1.3.6.1.4.1.449.2.1.2.1.1.32.1.11 |
This parameter refers to the remote address which
will be called by the TNPP PAD port.
Specifies the Mnemonic Address for Autocall. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..8) |
|
tnppPCfgAutocallTimeout |
1.3.6.1.4.1.449.2.1.2.1.1.32.1.12 |
This parameter is the time interval in seconds
between call attempts when auto calling.
Specifies the time value for retrying AUTOCALL
in seconds. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
5..255 |
|
tnppPCfgMaxAutocallAttempt |
1.3.6.1.4.1.449.2.1.2.1.1.32.1.13 |
Specifies the number of Autocall attempts.
0 - No Autocall retry limit. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..20 |
|
tnppPCfgProtectionLevel |
1.3.6.1.4.1.449.2.1.2.1.1.32.1.14 |
This specifies the level of data or connection
protection which will be applied to calls to or
from this port. The actual level for a call will
be negotiated to the lesser of this level and the
level configured for the other end of the call.
none - No protection.
cpOnly - Connection protection only.
fullDcp - Full data and connection protection.
nc - Skipped during configuration. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(1), cpOnly(2), fullDcp(3), nc(100) |
|
tnppPCfgReconnTimeout |
1.3.6.1.4.1.449.2.1.2.1.1.32.1.15 |
This specifies the number of seconds that DCP on the
originating side will wait between reconnection
attempts. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..128 |
|
tnppPCfgMaxReconnAttempt |
1.3.6.1.4.1.449.2.1.2.1.1.32.1.16 |
This specifies the number of times that DCP on the
orginating side will attempt to reconnect before
clearing the call. If the value is zero no attempt
to reconnect will be made. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..127 |
|
tnppPCfgElectricalInterfaceType |
1.3.6.1.4.1.449.2.1.2.1.1.32.1.17 |
Specify the Electrical Interface Type:
V.24 - V.24 Electrical Interface Type
V.35 - V.35 Electrical Interface Type
V.36 - V.36 Electrical Interface Type
X.21 - X.21 Electrical Interface Type
NONE - Electrically disabled |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
v24(1), v35(2), v36(3), x21(4), none(5) |
|
tnppPCfgV24ElectricalInterfaceOption |
1.3.6.1.4.1.449.2.1.2.1.1.32.1.18 |
Specify the Pin 22 option:
RI - V.24 uses Pin 22 for Ring Indicator output signal
TM - V.24 uses Pin 22 for Test Mode input signal |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
ri(1), tm(2) |
|
tnppPCfgHighSpeedElectricalInterfaceOption |
1.3.6.1.4.1.449.2.1.2.1.1.32.1.19 |
Specify the cable type:
NONE - V.35/V.36/X.21 DCE with straight through cable
XOVER - V.35/V.36/X.21 DCE with crossover adapter cable |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(1), xover(2) |
|
tnppPGenStatTable |
1.3.6.1.4.1.449.2.1.3.1.1.33.1 |
This table contains the port statistics
general parameters. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
TNPPPGenStatEntry |
|
tnppPGenStatEntry |
1.3.6.1.4.1.449.2.1.3.1.1.33.1.1 |
Entries in the TNPP port statistics
general parameters table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
TNPPPGenStatEntry |
|
|
tnppPGStatPortNumber |
1.3.6.1.4.1.449.2.1.3.1.1.33.1.1.1 |
Port Number of the TNPP port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..54 |
|
tnppPGStatPortType |
1.3.6.1.4.1.449.2.1.3.1.1.33.1.1.2 |
This indicates the type of access protocol
for this port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
tnpp(36) |
|
tnppPGStatPortStatus |
1.3.6.1.4.1.449.2.1.3.1.1.33.1.1.3 |
This indicates the operational status of the port.
disabled : port is disabled.
up : port is up.
na : Value not available. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1), up(2), na(100) |
|
tnppPGStatPortSpeed |
1.3.6.1.4.1.449.2.1.3.1.1.33.1.1.4 |
This indicates the port speed in bits per second. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
tnppPGStatPortUtilIn |
1.3.6.1.4.1.449.2.1.3.1.1.33.1.1.5 |
This indicates the port utilization for the line to
port direction. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
tnppPGStatPortUtilOut |
1.3.6.1.4.1.449.2.1.3.1.1.33.1.1.6 |
This indicates the port utilization for the port to
line direction. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
tnppPGStatParityErrors |
1.3.6.1.4.1.449.2.1.3.1.1.33.1.1.7 |
This indicates the number of parity errors counted
by the I/O driver. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
tnppPGStatOverrunErrors |
1.3.6.1.4.1.449.2.1.3.1.1.33.1.1.8 |
This indicates number of overrun errors
detected by the I/O driver. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
tnppPGStatFramingErrors |
1.3.6.1.4.1.449.2.1.3.1.1.33.1.1.9 |
This indicates number of framing errors
detected by the I/O driver. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
tnppPGStatLocalDTEState |
1.3.6.1.4.1.449.2.1.3.1.1.33.1.1.10 |
This indicates the local DTE state.
active - DTE is active.
down - DTE is down.
na - Value not available. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
down(1), active(2), na(100) |
|
tnppPGStatRemoteDTEState |
1.3.6.1.4.1.449.2.1.3.1.1.33.1.1.11 |
This indicates the remote DTE state.
active - DTE is active.
down - DTE is down.
na - Value not available. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
down(1), active(2), na(100) |
|
tnppPGStatRemotePadQ |
1.3.6.1.4.1.449.2.1.3.1.1.33.1.1.12 |
This indicates the size of the remote
TNPP PAD queue. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
tnppPGStatLocalTerminalQ |
1.3.6.1.4.1.449.2.1.3.1.1.33.1.1.13 |
This indicates the size of the Local Terminal queue. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
tnppPGStatReadyQ |
1.3.6.1.4.1.449.2.1.3.1.1.33.1.1.14 |
This indicates the size of the Ready Queue. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
tnppPGStatHoldQ |
1.3.6.1.4.1.449.2.1.3.1.1.33.1.1.15 |
This indicates the size of the Hold Queue. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
tnppPDataSummaryStatEntry |
1.3.6.1.4.1.449.2.1.3.1.1.33.2.1 |
Entries in the TNPP port statistics data summary table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
TNPPPDataSummaryStatEntry |
|
|
tnppPDSStatPortNumber |
1.3.6.1.4.1.449.2.1.3.1.1.33.2.1.1 |
Port Number of the TNPP port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..54 |
|
tnppPDSStatTotalCharIn |
1.3.6.1.4.1.449.2.1.3.1.1.33.2.1.2 |
This indicates the total number of characters
that have been received by the port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
tnppPDSStatTotalCharOut |
1.3.6.1.4.1.449.2.1.3.1.1.33.2.1.3 |
This indicates the total number of characters
that have been transmitted by the port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
tnppPDSStatTotalFramesIn |
1.3.6.1.4.1.449.2.1.3.1.1.33.2.1.4 |
This indicates the total number of frames that
have been received by the port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
tnppPDSStatTotalFramesOut |
1.3.6.1.4.1.449.2.1.3.1.1.33.2.1.5 |
This indicates the total number of frames
that have been transmitted by the port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
tnppPDSStatCharInPerSec |
1.3.6.1.4.1.449.2.1.3.1.1.33.2.1.6 |
This indicates the rate at which characters
have been received by the port per second. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
tnppPDSStatCharOutPerSec |
1.3.6.1.4.1.449.2.1.3.1.1.33.2.1.7 |
This indicates the rate at which characters
have been transmitted by the port per second. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
tnppPDSStatFramesInPerSec |
1.3.6.1.4.1.449.2.1.3.1.1.33.2.1.8 |
This indicates the rate at which frames have
been received by the port per second. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
tnppPDSStatFramesOutPerSec |
1.3.6.1.4.1.449.2.1.3.1.1.33.2.1.9 |
This indicates the rate at which frames have
been transmitted by the port per second. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
tnppPFrameSummaryStatEntry |
1.3.6.1.4.1.449.2.1.3.1.1.33.3.1 |
Entries in the TNPP port statistics frame summary table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
TNPPPFrameSummaryStatEntry |
|
|
tnppPFSStatPortNumber |
1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.1 |
Port number of the TNPP port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..54 |
|
tnppPFSStatLinkState |
1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.2 |
This indicates the current link state.
init - Initialization state.
awaitEnqResp - Await enquiry response state.
ready - Ready to communicate state.
transmitting - Transmitting state.
transmitResponse - Transmit response state.
na - Value not available. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
init(1), awaitEnqResp(2), ready(3), transmitting(4), trnsmitResponse(5), na(100) |
|
tnppPFSStatCRCErrors |
1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.3 |
This indicates the total number of TNPP frames
received with Cyclic Redundancy Check errors . |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
tnppPFSStatLinkFramingErrors |
1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.4 |
This indicates the total number of TNPP framing
errors occured (Invalid Header, Invalid Control
character, Frame Size Exceeded, Incomplete Frame,
etc.,) . |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
tnppPFSStatProtocolErrors |
1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.5 |
This indicates the number of protocol errors
due to unexpected events. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
tnppPFSStatACKFramesIn |
1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.6 |
This indicates the total number of Acknowledgment
frames received by the port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
tnppPFSStatACKFramesOut |
1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.7 |
This indicates the total number of Acknowledgment
frames transmitted by the port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
tnppPFSStatNAKFramesIn |
1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.8 |
This indicates the total number of Negative
Acknowledgment frames received by the port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
tnppPFSStatNAKFramesOut |
1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.9 |
This indicates the total number of Negative
Acknowledgment frames transmitted by the port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
tnppPFSStatRSFramesIn |
1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.10 |
This indicates the total number of Request to Stop
frames received by the port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
tnppPFSStatRSFramesOut |
1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.11 |
This indicates the total number of Request to Stop
frames transmitted by the port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
tnppPFSStatCANFramesIn |
1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.12 |
This indicates the total number of CANcel report
frames received by the port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
tnppPFSStatCANFramesOut |
1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.13 |
This indicates the total number of CANcel report
frames transmitted by the port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
tnppPFSStatEOTFramesIn |
1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.14 |
This indicates the total number of End of Transmission
frames received by the port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
tnppPFSStatEOTFramesOut |
1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.15 |
This indicates the total number of End of Transmission
frames transmitted by the port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
tnppPFSStatENQFramesIn |
1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.16 |
This indicates the total number of Enquiry
frames received by the port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
tnppPFSStatENQFramesOut |
1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.17 |
This indicates the total number of Enquiry
frames transmitted by the port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
tnppPFSStatDataFramesInPassed |
1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.18 |
This indicates the total number of valid
data frames received by the port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
tnppPFSStatDataFramesOutPassed |
1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.19 |
This indicates the total number of valid
data frames transmitted by the port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
tnppPFSStatDataFramesInDiscarded |
1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.20 |
This indicates the total number of data frames
received by the port and discarded. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
tnppPFSStatDataFramesOutDiscarded |
1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.21 |
This indicates the total number of data frames
transmitted by the port and discarded. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
cdx6500ContTNPPPortEntry |
1.3.6.1.4.1.449.2.1.4.15.1.1 |
Entries in the TNPP Port Control Table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Cdx6500ContTNPPPortEntry |
|
|
tnppPContPortNumber |
1.3.6.1.4.1.449.2.1.4.15.1.1.1 |
Port number of the TNPP port. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..54 |
|
tnppPContPortControl |
1.3.6.1.4.1.449.2.1.4.15.1.1.2 |
Control operations for the specified TNPP port.
boot - Boots the TNPP Port.
enable - Enables the TNPP Port.
disable - Disables the TNPP Port.
busyout - Busyout the TNPP Port.
resetstats - Resets the TNPP port statistics. |
Status: mandatory |
Access: write-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
boot(1), enable(2), disable(3), busyout(4), resetstats(5) |
|