TIMETRA-SAS-SYSTEM-MIB

File: TIMETRA-SAS-SYSTEM-MIB.mib (104425 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
TIMETRA-SAS-GLOBAL-MIB TIMETRA-GLOBAL-MIB TIMETRA-TC-MIB
TIMETRA-CHASSIS-MIB IF-MIB INET-ADDRESS-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Gauge32 Integer32 IpAddress
Unsigned32 MODULE-COMPLIANCE OBJECT-GROUP
NOTIFICATION-GROUP TEXTUAL-CONVENTION DateAndTime
DisplayString RowStatus TruthValue
RowPointer TimeStamp timetraSASObjs
timetraSASNotifyPrefix timetraSASConfs timetraSASModules
timetraSRMIBModules tmnxSRObjs tmnxSRConfs
tmnxSRNotifyPrefix TNamedItem TNamedItemOrEmpty
TmnxAdminState TmnxOperState TmnxActionType
TTcpUdpPort IpAddressPrefixLength TmnxVwmCardType
TItemDescription TPolicyID TCIRRate
TPIRRate TBurstSize TmnxPortID
TSysResource ServiceOperStatus TmnxOperGrpHoldUpTime
TmnxOperGrpHoldDownTime TmnxLEDState tmnxChassisIndex
InterfaceIndexOrZero InetAddress tmnxHwName
tmnxCpmCardEntry tmnxChassisNotifyHwIndex tmnxChassisEntry
tmnxHwID tmnxHwClass tmnxHwTemperature
tmnxHwEntry tmnxHwOperState tmnxChassisPowerSupplyEntry
tmnxChassisFanEntry tmnxCardEntry tmnxChassisPowerSupplyInputStatus
TmnxSlotNumOrZero tmnxChassisPowerSupplyOutputStatus

Defined Types

TmnxFanCfgMode  
User controlled fan oper modes
TEXTUAL-CONVENTION    
  INTEGER on(1), off(2), auto(3)  

TmnxPtpTime  
Identify usage of PTP derived time.
TEXTUAL-CONVENTION    
  INTEGER noPtpTime(0), system(1), oam(2)  

TmnxSysOperGrpCreationOrigin  
A number used to identify creation origin for the system operational group.
TEXTUAL-CONVENTION    
  INTEGER manual(1), mvrp(2)  

SbiUplinkRouteEntry  
SEQUENCE    
  sbiUplinkAorB Unsigned32
  sbiUplinkRouteDest IpAddress
  sbiUplinkRouteMask IpAddressPrefixLength
  sbiUplinkRouteNextHop IpAddress
  sbiUplinkRouteRowStatus RowStatus

SbiEthMgmtStaticRouteEntry  
SEQUENCE    
  sbiEthMgmtStaticRouteDest IpAddress
  sbiEthMgmtStaticRouteMask IpAddressPrefixLength
  sbiEthMgmtStaticRouteNextHop IpAddress
  sbiEthMgmtStaticRouteRowStatus RowStatus

TmnxChassisExtnEntry  
SEQUENCE    
  tmnxChassisUpdateGoldenBootstrapImage TmnxActionType
  tmnxChassisGoldenBootstrapImageSrc DisplayString
  tmnxChassisValidateGoldenBootstrapImage TmnxActionType
  tmnxChassisGoldenBootstrapImageVersion DisplayString
  tmnxChassisRebootAutoInit TmnxActionType
  tmnxChassisLowTempState INTEGER
  tmnxChassisSystemLEDState TmnxLEDState

TmnxHwExtnEntry  
SEQUENCE    
  tmnxHwLowTempThreshold Integer32

TmnxFabricPolicyEntry  
SEQUENCE    
  tmnxFabricPolicyIndex TPolicyID
  tmnxFabricPolicyRowStatus RowStatus
  tmnxFabricPolicyCIR TCIRRate
  tmnxFabricPolicyPIR TPIRRate
  tmnxFabricPolicyCBS TBurstSize
  tmnxFabricPolicyMBS TBurstSize
  tmnxFabricPolicyMpointFabricPort Integer32

TmnxChassisPowerSupplyExtnEntry  
SEQUENCE    
  tmnxChassisPowerSupplyAssignedDCType INTEGER

TmnxChassisFanExtnEntry  
SEQUENCE    
  tmnxChassisFanCfgMode TmnxFanCfgMode
  tmnxChassisFanOperMode INTEGER

TmnxCardExtnEntry  
SEQUENCE    
  tmnxCardSysResPlcyId INTEGER

TmnxCpmCardExtnEntry  
SEQUENCE    
  tmnxCpmCardBootImageSource DisplayString

TResPlcyEntry  
SEQUENCE    
  tResPlcyId INTEGER
  tResPlcyRowStatus RowStatus
  tResPlcyIngTcamSapAggMeter INTEGER
  tResPlcyIngTcamQosSapIng INTEGER
  tResPlcyIngTcamQosSapIngIpv4 INTEGER
  tResPlcyIngTcamQosSapIngIpv4Ipv6 INTEGER
  tResPlcyIngTcamQosSapIngMac INTEGER
  tResPlcyIngTcamAclSapIng INTEGER
  tResPlcyIngTcamAclSapIngIpv4 INTEGER
  tResPlcyIngTcamAclSapIng64Ipv6 INTEGER
  tResPlcyIngTcamAclSapIng128Ipv4Ipv6 INTEGER
  tResPlcyIngTcamAclSapIngMac INTEGER
  tResPlcyEgrTcamAclSapEgr INTEGER
  tResPlcyEgrTcamAclSapEgrMacIpv4 INTEGER
  tResPlcyEgrTcamAclSapEgr128Ipv6 INTEGER
  tResPlcyEgrTcamAclSapEgr64MacIpv6 INTEGER
  tResPlcyEgrTcamAclSapEgrMac INTEGER
  tResPlcyDescription TItemDescription
  tResPlcyLastChanged TimeStamp
  tResPlcyIngTcamEthCfm INTEGER
  tResPlcyIngTcamEthCfmUpMep INTEGER
  tResPlcyG8032CtrlSapStartVlan Unsigned32
  tResPlcyG8032CtrlSapEndVlan Unsigned32
  tResPlcyResIpMacMatchEnable INTEGER
  tResPlcyIngTcamEthCfmDownMep INTEGER
  tResPlcyIngTcamEthCfmUpMepEnable TruthValue
  tResPlcyIngTcamEthCfmDownMepEnable TruthValue

TResDecommEntry  
SEQUENCE    
  tResDecommId INTEGER
  tResDecommRowStatus RowStatus
  tResDecommFromPortMap Unsigned32
  tResDecommToPortMap Unsigned32

TResDecommOperEntry  
SEQUENCE    
  tResDecommOperId INTEGER
  tResDecommOperFromPortMap Unsigned32
  tResDecommOperToPortMap Unsigned32

SysOperGrpEntry  
SEQUENCE    
  sysOperGrpName TNamedItem
  sysOperGrpRowStatus RowStatus
  sysOperGrpLastChange TimeStamp
  sysOperGrpOperStatus ServiceOperStatus
  sysOperGrpHoldDownTime TmnxOperGrpHoldDownTime
  sysOperGrpCreationOrigin TmnxSysOperGrpCreationOrigin
  sysOperGrpHoldUpTime TmnxOperGrpHoldUpTime
  sysOperGrpHoldUpTimeRemain TmnxOperGrpHoldUpTime
  sysOperGrpHoldDownTimeRemain TmnxOperGrpHoldDownTime
  sysOperGrpNumMembers Gauge32
  sysOperGrpNumMonitoring Gauge32

TmnxVwmShelfEntry  
SEQUENCE    
  tmnxVwmShelfId INTEGER
  tmnxVwmShelfRowStatus RowStatus
  tmnxVwmShelfAdminState TmnxAdminState
  tmnxVwmShelfOperState TmnxAdminState
  tmnxVwmShelfVwmType INTEGER
  tmnxVwmShelfEquippedType INTEGER
  tmnxVwmshelfTypeConnected INTEGER

TmnxVwmShelfCardEntry  
SEQUENCE    
  tmnxVwmShelfCardId INTEGER
  tmnxVwmShelfCardType TmnxVwmCardType
  tmnxVwmShelfCardEqType TmnxVwmCardType
  tmnxVwmShelfCardAdminState TmnxAdminState
  tmnxVwmShelfCardOperState TmnxAdminState

AluExtTmnxChassisEntry  
SEQUENCE    
  aluExtPoePowerMode INTEGER
  aluExtPoePowerSupplyStatus INTEGER
  aluExtPoeExternalPowerSupplyStatus INTEGER

TCardResOperEntry  
SEQUENCE    
  tCardResOperIngTcamSapAggMeter INTEGER
  tCardResOperIngTcamQosSapIng INTEGER
  tCardResOperIngTcamQosSapIngIpv4 INTEGER
  tCardResOperIngTcamQosSapIngIpv4Ipv6 INTEGER
  tCardResOperIngTcamQosSapIngMac INTEGER
  tCardResOperIngTcamAclSapIng INTEGER
  tCardResOperIngTcamAclSapIngIpv4 INTEGER
  tCardResOperIngTcamAclSapIng64Ipv6 INTEGER
  tCardResOperIngTcamAclSapIng128Ipv4Ipv6 INTEGER
  tCardResOperIngTcamAclSapIngMac INTEGER
  tCardResOperEgrTcamAclSapEgr INTEGER
  tCardResOperEgrTcamAclSapEgrMacIpv4 INTEGER
  tCardResOperEgrTcamAclSapEgr128Ipv6 INTEGER
  tCardResOperEgrTcamAclSapEgr64MacIpv6 INTEGER
  tCardResOperEgrTcamAclSapEgrMac INTEGER
  tCardResOperIngTcamEthCfm INTEGER
  tCardResOperIngTcamEthCfmUpMep INTEGER
  tCardResOperG8032CtrlSapStartVlan Unsigned32
  tCardResOperG8032CtrlSapEndVlan Unsigned32
  tCardResOperResIpMacMatchEnable INTEGER
  tCardResOperIngTcamEthCfmDownMep INTEGER
  tCardResOperIngTcamIpMulticast INTEGER

Defined Values

timetraSASysMIBModule 1.3.6.1.4.1.6527.6.2.1.1.7
This document is the System SNMP MIB module for the Alcatel 7x50 device. The System MIB module defines SNMP objects to manage and provision system features. Copyright 2003-2014 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel's proprietary intellectual property. Alcatel retains all title and ownership in the Specification, including any revisions. Alcatel grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied `as is', and Alcatel makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
MODULE-IDENTITY    

tmnxSASSysObjs 1.3.6.1.4.1.6527.6.2.2.2.5
OBJECT IDENTIFIER    

tmnxSASChassisObjs 1.3.6.1.4.1.6527.6.2.2.2.6
OBJECT IDENTIFIER    

tmnxSASSysConformance 1.3.6.1.4.1.6527.6.2.2.1.3
OBJECT IDENTIFIER    

tmnxSASSysMIBNotifyPrefix 1.3.6.1.4.1.6527.6.2.2.3.1
OBJECT IDENTIFIER    

tmnxSASSysNotifications 1.3.6.1.4.1.6527.6.2.2.3.1.3
OBJECT IDENTIFIER    

tmnxSASChassisNotificationObjs 1.3.6.1.4.1.6527.6.2.2.2.6.1
OBJECT IDENTIFIER    

tmnxSASChassisNotification 1.3.6.1.4.1.6527.6.2.2.2.6.2
OBJECT IDENTIFIER    

sysSASBofInfo 1.3.6.1.4.1.6527.6.2.2.2.5.11
OBJECT IDENTIFIER    

sysEthMgmtBofInfo 1.3.6.1.4.1.6527.6.2.2.2.5.12
OBJECT IDENTIFIER    

sysMpointMgmtInfo 1.3.6.1.4.1.6527.6.2.2.2.5.15
OBJECT IDENTIFIER    

sysLoopBackInfo 1.3.6.1.4.1.6527.6.2.2.2.5.16
OBJECT IDENTIFIER    

sysResourceProfInfo 1.3.6.1.4.1.6527.6.2.2.2.5.17
OBJECT IDENTIFIER    

sysSASObjs 1.3.6.1.4.1.6527.6.2.2.2.5.18
OBJECT IDENTIFIER    

sysSASVwmObjs 1.3.6.1.4.1.6527.6.2.2.2.5.19
OBJECT IDENTIFIER    

sysQosObjs 1.3.6.1.4.1.6527.6.2.2.2.5.20
OBJECT IDENTIFIER    

sysClockInfo 1.3.6.1.4.1.6527.6.2.2.2.5.21
OBJECT IDENTIFIER    

sysResProfPlcyObjs 1.3.6.1.4.1.6527.6.2.2.2.5.22
OBJECT IDENTIFIER    

sysResProfDecommObjs 1.3.6.1.4.1.6527.6.2.2.2.5.23
OBJECT IDENTIFIER    

sysOperGrpObjs 1.3.6.1.4.1.6527.6.2.2.2.5.24
OBJECT IDENTIFIER    

tmnxSASSecurityObjects 1.3.6.1.4.1.6527.6.2.2.2.15
OBJECT IDENTIFIER    

tmnxSASSecurityNotifyPrefix 1.3.6.1.4.1.6527.6.2.2.3.2
OBJECT IDENTIFIER    

tmnxSASSecurityNotifications 1.3.6.1.4.1.6527.6.2.2.3.2.0
OBJECT IDENTIFIER    

sbiUplinkAPort 1.3.6.1.4.1.6527.6.2.2.2.5.11.1
Primary bof port used for autoconfig. When set to zero 'uplinAport' would be reset
Status: current Access: read-write
OBJECT-TYPE    
  InterfaceIndexOrZero  

sbiUplinkAIpAddr 1.3.6.1.4.1.6527.6.2.2.2.5.11.2
Primary bof port ip address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sbiUplinkAMask 1.3.6.1.4.1.6527.6.2.2.2.5.11.3
The value of sbiActiveIpMask specifies the mask length of the subnet associated with the IP address of the primary bof port.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddressPrefixLength  

sbiUplinkAVlan 1.3.6.1.4.1.6527.6.2.2.2.5.11.5
Vlan tag to be used on uplinkA, if set to -1 packets are sent out without vlan tag
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1..4094  

sbiUplinkBPort 1.3.6.1.4.1.6527.6.2.2.2.5.11.6
Secondary bof port used for autoconfig. When set to zero 'uplinBport' would be reset
Status: current Access: read-write
OBJECT-TYPE    
  InterfaceIndexOrZero  

sbiUplinkBIpAddr 1.3.6.1.4.1.6527.6.2.2.2.5.11.7
Secondary bof port ip address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sbiUplinkBMask 1.3.6.1.4.1.6527.6.2.2.2.5.11.8
The value of sbiActiveIpMask specifies the mask length of the subnet associated with the IP address of the bof uplink B port.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddressPrefixLength  

sbiUplinkBVlan 1.3.6.1.4.1.6527.6.2.2.2.5.11.10
Vlan tag to be used on uplinkB, if set to -1 packets are sent out without vlan tag
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1..4094  

sbiPingAddress 1.3.6.1.4.1.6527.6.2.2.2.5.11.11
IP address to be used for ping-test after booting. This is the last step in the auto-init process
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sbiUplinkRouteTable 1.3.6.1.4.1.6527.6.2.2.2.5.11.12
The sbiUplinkRouteTable contains an entry for each static route configured for the given uplink A or B. These static routes are only used during the system bootup
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SbiUplinkRouteEntry

sbiUplinkRouteEntry 1.3.6.1.4.1.6527.6.2.2.2.5.11.12.1
Each row entry contains information about a static route configured for the inband mangement. Entries in this table can be created and deleted via SNMP SET operations to sbiUplinkRouteRowStatus.
Status: current Access: not-accessible
OBJECT-TYPE    
  SbiUplinkRouteEntry  

sbiUplinkAorB 1.3.6.1.4.1.6527.6.2.2.2.5.11.12.1.1
If set to 1 this route is for the uplinkA, if it is set to 2 it is for uplinkB
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1 | 2  

sbiUplinkRouteDest 1.3.6.1.4.1.6527.6.2.2.2.5.11.12.1.2
The value of 'sbiUplinkBofRouteDest' specifies the destination IP address of this static route.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

sbiUplinkRouteMask 1.3.6.1.4.1.6527.6.2.2.2.5.11.12.1.3
The value of sbiUplinkRouteMask specifies the length of the subnet mask associated with the destination IP address of this static route.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddressPrefixLength  

sbiUplinkRouteNextHop 1.3.6.1.4.1.6527.6.2.2.2.5.11.12.1.4
The value of sbiUplinkRouteNextHop specifies the IP address of the next hop for this static route. This IP address should be in the same subnet as the ethernet port on the active CPM. The value of sbiUplinkRouteNextHop must be set to a valid IP address for the row creation to succeed.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

sbiUplinkRouteRowStatus 1.3.6.1.4.1.6527.6.2.2.2.5.11.12.1.5
sbiUplinkRouteRowStatus controls the creation and deletion of rows in the table. To create a row in this table, set the row status to createAndGo(4)'. The value of sbiUplinkRouteNextHop must also be set to a valid IP address for the row creation to succeed. To delete a row in this table, set the row status to delete(6).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

sbiEthMgmtDisabled 1.3.6.1.4.1.6527.6.2.2.2.5.12.1
The value of sbiEthMgmtDisabled determines whether or not the out of band ethernet management port is enabled. When set to 'true', out of band ethernet management port is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sbiEthMgmtActiveIpAddr 1.3.6.1.4.1.6527.6.2.2.2.5.12.2
The value of sbiEthMgmtActiveIpAddr specifies the IP address of the out of band ethernet port.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sbiEthMgmtActiveIpMask 1.3.6.1.4.1.6527.6.2.2.2.5.12.3
The value of sbiEthMgmtActiveIpMask specifies the mask length of the subnet associated with the IP address of the out of band ethernet port.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddressPrefixLength  

sbiEthMgmtAutoNegotiate 1.3.6.1.4.1.6527.6.2.2.2.5.12.4
The value of sbiEthMgmtAutoNegotiate determines whether or not the speed and duplex parameters will be automatically negotiated on the out of band ethernet port.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sbiEthMgmtSpeed 1.3.6.1.4.1.6527.6.2.2.2.5.12.5
The value of sbiEthMgmtSpeed specifies the speed of the out of band ethernet port. This value is ignored if auto-negotiation is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 10 | 100  

sbiEthMgmtDuplex 1.3.6.1.4.1.6527.6.2.2.2.5.12.6
The value of sbiEthMgmtDuplex specifies the duplex mode for the out of band ethernet port. This value is ignored if auto-negotiation is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER full(1), half(2)  

sbiEthMgmtStaticRouteTable 1.3.6.1.4.1.6527.6.2.2.2.5.12.7
The sbiEthMgmtStaticRouteTable contains an entry for each static route configured for the out of band ethernet port. These static routes are only used to route traffic generated by the out of band ethernet port.The table can have upto a maximum of 10 entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SbiEthMgmtStaticRouteEntry

sbiEthMgmtStaticRouteEntry 1.3.6.1.4.1.6527.6.2.2.2.5.12.7.1
Each row entry contains information about a static route configured for the out of band ethernet port. Entries in this table can be created and deleted via SNMP SET operations to sbiEthMgmtStaticRouteRowStatus.
Status: current Access: not-accessible
OBJECT-TYPE    
  SbiEthMgmtStaticRouteEntry  

sbiEthMgmtStaticRouteDest 1.3.6.1.4.1.6527.6.2.2.2.5.12.7.1.1
The value of sbiEthMgmtStaticRouteDest specifies the destination IP address of this static route.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

sbiEthMgmtStaticRouteMask 1.3.6.1.4.1.6527.6.2.2.2.5.12.7.1.2
The value of sbiEthMgmtStaticRouteMask specifies the length of the subnet mask associated with the destination IP address of this static route.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddressPrefixLength  

sbiEthMgmtStaticRouteNextHop 1.3.6.1.4.1.6527.6.2.2.2.5.12.7.1.3
The value of sbiEthMgmtStaticRouteNextHop specifies the IP address of the next hop for this static route. This IP address should be in the same subnet as the ethernet port on the active CPM. The value of sbiEthMgmtStaticRouteNextHop must be set to a valid IP address for the row creation to succeed.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

sbiEthMgmtStaticRouteRowStatus 1.3.6.1.4.1.6527.6.2.2.2.5.12.7.1.4
sbiEthMgmtStaticRouteRowStatus controls the creation and deletion of rows in the table. To create a row in this table, set the row status to createAndGo(4)'. The value of sbiEthMgmtStaticRouteNextHop must also be set to a valid IP address for the row creation to succeed. To delete a row in this table, set the row status to delete(6).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

sbiNoServicePortOne 1.3.6.1.4.1.6527.6.2.2.2.5.11.13
The value of sbiNoServicePortOne indicates service traffic on the port identified by this InterfaceIndex is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  InterfaceIndexOrZero  

sbiNoServicePortTwo 1.3.6.1.4.1.6527.6.2.2.2.5.11.14
The value of sbiNoServicePortTwo indicates service traffic on the port identified by this InterfaceIndex is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  InterfaceIndexOrZero  

sbiUplinkAdminMode 1.3.6.1.4.1.6527.6.2.2.2.5.11.15
sbiUplinkAdminMode when set to access-uplink, bof uplink would be used in l2 mode,the default mode is network
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER network(1), access-uplink(2)  

sbiUplinkOperMode 1.3.6.1.4.1.6527.6.2.2.2.5.11.16
sbiUplinkOperMode is operational mode of the system. This object is initialized during system bootup based on sbiUplinkAdminMode setting
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER network(1), access-uplink(2)  

sbiExpansionCardType 1.3.6.1.4.1.6527.6.2.2.2.5.11.17
sbiExpansionCardType identifies the expansion card type to the system before boot up. The system will not allow for provisioning of a different MDA than the one currently specified in the BOF. Changes to sbiExpansionCardType equires a reboot to take effect
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER m4-ds1-ces(1), m2-xfp(2)  

sbiConsoleDisabled 1.3.6.1.4.1.6527.6.2.2.2.5.11.18
The value of sbiConsoleDisabled determines whether or not the system console is disabled. When set to 'true' console is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sbiPassword 1.3.6.1.4.1.6527.6.2.2.2.5.11.19
sbiPassword is used to enable the user to configure the bof password.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..20)  

sbiUplinkAAutoNegotiate 1.3.6.1.4.1.6527.6.2.2.2.5.11.20
The value of sbiUplinkAAutoNegotiate determines whether or not the speed and duplex parameters will be automatically negotiated on the uplinkAport. When set to 'true', auto-negotiation is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sbiUplinkASpeed 1.3.6.1.4.1.6527.6.2.2.2.5.11.21
The value of sbiSpeed specifies the speed of the uplinkA port. This value is ignored if auto-negotiation is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 10 | 100 | 1000  

sbiUplinkADuplex 1.3.6.1.4.1.6527.6.2.2.2.5.11.22
The value of sbiDuplex specifies the duplex mode for the uplinkA port. This value is ignored if auto-negotiation is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER full(1), half(2)  

sbiUplinkBAutoNegotiate 1.3.6.1.4.1.6527.6.2.2.2.5.11.23
The value of sbiUplinkBAutoNegotiate determines whether or not the speed and duplex parameters will be automatically negotiated on the uplinkBport. When set to 'true', auto-negotiation is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sbiUplinkBSpeed 1.3.6.1.4.1.6527.6.2.2.2.5.11.24
The value of sbiSpeed specifies the speed of the uplinkB port. This value is ignored if auto-negotiation is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 10 | 100 | 1000  

sbiUplinkBDuplex 1.3.6.1.4.1.6527.6.2.2.2.5.11.25
The value of sbiDuplex specifies the duplex mode for the uplinkB port. This value is ignored if auto-negotiation is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER full(1), half(2)  

tmnxChassisExtnTable 1.3.6.1.4.1.6527.6.2.2.2.6.3
The chassis table has an entry for each chassis in the system. This table extends the tmnxChassisTable for the SAS platform
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxChassisExtnEntry

tmnxChassisExtnEntry 1.3.6.1.4.1.6527.6.2.2.2.6.3.1
An entry in this table would be created for every entry in the tmnxChassisEntry
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxChassisExtnEntry  

tmnxChassisUpdateGoldenBootstrapImage 1.3.6.1.4.1.6527.6.2.2.2.6.3.1.1
Setting this action variable to 'doAction' causes the current golden bootstrap image to be updated with the image at the location specified by tmnxChassisGoldenBootstrapImageSrc. If no location is specified by tmnxChassisGoldenBootstrapImageSrc, cf1:/boot.tim will be saved as the golden bootstrap image.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxActionType  

tmnxChassisGoldenBootstrapImageSrc 1.3.6.1.4.1.6527.6.2.2.2.6.3.1.2
The value of tmnxChassisGoldenBootstrapImageSrc specifies the source filepath or file-URL which will be saved as the golden bootstrap image when tmnxChassisUpdateGoldenBootstrapImage is set to 'doAction'. If 'tmnxChassisGoldenBootstrapImage' is set to the empty string, ''H, cf1:/boot.tim will be saved as the golden bootstrap image.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

tmnxChassisValidateGoldenBootstrapImage 1.3.6.1.4.1.6527.6.2.2.2.6.3.1.3
Setting this action variable to 'doAction' causes the current golden bootstrap image to be validated and upon completion tmnxChassisGoldenBootstrapImageVersion will be populated with its version. If the validation fails tmnxChassisGoldenBootstrapImageVersion will be populated apropriately.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxActionType  

tmnxChassisGoldenBootstrapImageVersion 1.3.6.1.4.1.6527.6.2.2.2.6.3.1.4
This object is populated with the version of the golden bootstrap image when validation is completed. If the validation fails, one of the following values is set: 'Invalid Golden Bootstrap Image' - Indicates the image is invalid.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

tmnxChassisRebootAutoInit 1.3.6.1.4.1.6527.6.2.2.2.6.3.1.5
Setting this action variable to 'doAction', will reset the bof and reboot the system
Status: current Access: read-write
OBJECT-TYPE    
  TmnxActionType  

tmnxChassisLowTempState 1.3.6.1.4.1.6527.6.2.2.2.6.3.1.6
The current Low Temperature state of this chassis. stateOk Indicates chassis is above the low temperature threshold. stateLowTemp Indicates chassis is below the low temperature threshold.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER stateOk(1), stateLowTemp(2)  

tmnxChassisSystemLEDState 1.3.6.1.4.1.6527.6.2.2.2.6.3.1.7
The current state of the System LED in this chassis.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxLEDState  

tmnxHwExtnTable 1.3.6.1.4.1.6527.6.2.2.2.6.4
The tmnxHwTable has an entry for each managed hardware component. This table extends the TmnxHwEntry for the SAS platform
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxHwExtnEntry

tmnxHwExtnEntry 1.3.6.1.4.1.6527.6.2.2.2.6.4.1
An entry in this table would be created for every entry in the tmnxChassisEntry
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxHwExtnEntry  

tmnxHwLowTempThreshold 1.3.6.1.4.1.6527.6.2.2.2.6.4.1.1
The low temperature threshold for this hardware component in degrees celsius. When the value of tmnxHwTemperature lowers below tmnxHwLowTempThreshold, a 'temperature too low' event will be generated.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

tmnxFabricPolicyTable 1.3.6.1.4.1.6527.6.2.2.2.6.5
This table provides the context to configure the fabric policy in use by different applications. Currently, PBB is the only application using it and only one default object is supported
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxFabricPolicyEntry

tmnxFabricPolicyEntry 1.3.6.1.4.1.6527.6.2.2.2.6.5.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxFabricPolicyEntry  

tmnxFabricPolicyIndex 1.3.6.1.4.1.6527.6.2.2.2.6.5.1.1
the policy ID is the index to this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  TPolicyID 1..65535  

tmnxFabricPolicyRowStatus 1.3.6.1.4.1.6527.6.2.2.2.6.5.1.2
Row Status for the policy.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tmnxFabricPolicyCIR 1.3.6.1.4.1.6527.6.2.2.2.6.5.1.3
The CIR specified by the user.
Status: current Access: read-create
OBJECT-TYPE    
  TCIRRate  

tmnxFabricPolicyPIR 1.3.6.1.4.1.6527.6.2.2.2.6.5.1.4
The PIR specified by the user.
Status: current Access: read-create
OBJECT-TYPE    
  TPIRRate  

tmnxFabricPolicyCBS 1.3.6.1.4.1.6527.6.2.2.2.6.5.1.5
The amount of reserved buffer space (in kilo bytes).
Status: current Access: read-create
OBJECT-TYPE    
  TBurstSize  

tmnxFabricPolicyMBS 1.3.6.1.4.1.6527.6.2.2.2.6.5.1.6
The maximum amount of buffer space (in kilo bytes) allowed
Status: current Access: read-create
OBJECT-TYPE    
  TBurstSize  

tmnxFabricPolicyMpointFabricPort 1.3.6.1.4.1.6527.6.2.2.2.6.5.1.7
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..4  

tmnxChassisPowerSupplyExtnTable 1.3.6.1.4.1.6527.6.2.2.2.6.6
This table extends the Power Supply Information defined in tmnxChassisPowerSupplyTable
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxChassisPowerSupplyExtnEntry

tmnxChassisPowerSupplyExtnEntry 1.3.6.1.4.1.6527.6.2.2.2.6.6.1
Contains information regarding a power supply tray.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxChassisPowerSupplyExtnEntry  

tmnxChassisPowerSupplyAssignedDCType 1.3.6.1.4.1.6527.6.2.2.2.6.6.1.1
tmnxChassisPowerSupplyAssignedDCType when set to `m48-dc`, the power supply is -48V DC, when set to P24-dc it is +24V DC. tmnxChassisPowerSupplyAssignedDCType is set to m48-dc or p24-dc if tmnxChassisPowerSupplyAssignedType is of type `dc`, If tmnxChassisPowerSupplyAssignedType is not `dc` tmnxChassisPowerSupplyAssignedDCType will be set to not-applicable.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER not-applicable(0), m48-dc(1), p24-dc(2), unknown(3)  

tmnxChassisFanExtnTable 1.3.6.1.4.1.6527.6.2.2.2.6.7
This table extends the system fan information
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxChassisFanExtnEntry

tmnxChassisFanExtnEntry 1.3.6.1.4.1.6527.6.2.2.2.6.7.1
Contains information regarding Fan tray.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxChassisFanExtnEntry  

tmnxChassisFanCfgMode 1.3.6.1.4.1.6527.6.2.2.2.6.7.1.1
tmnxChassisFanCfgMode is the configuration object used to determine how the fan in controlled. It can be either user controlled (on|off) or in 'auto' mode where the operation will be based on threshold values.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxFanCfgMode  

tmnxChassisFanOperMode 1.3.6.1.4.1.6527.6.2.2.2.6.7.1.2
tmnxChassisFanOperMode is a read only object which will determine the current mode of operation.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

tmnxSASCardObjs 1.3.6.1.4.1.6527.6.2.2.2.6.8
OBJECT IDENTIFIER    

tmnxCardExtnTable 1.3.6.1.4.1.6527.6.2.2.2.6.8.1
The tmnxCardExtnTable has an entry for each one of the entry in tmnxCardTable
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxCardExtnEntry

tmnxCardExtnEntry 1.3.6.1.4.1.6527.6.2.2.2.6.8.1.1
The tmnxCardExtnEntry extends tmnxCardEntry capabilities
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxCardExtnEntry  

tmnxCardSysResPlcyId 1.3.6.1.4.1.6527.6.2.2.2.6.8.1.1.1
system resource policy id attached to this card
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..16  

tmnxCpmCardExtnTable 1.3.6.1.4.1.6527.6.2.2.2.6.8.2
The tmnxCpmCardExtnTable has an entry for each CPM card or module in each chassis in the TMNX system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxCpmCardExtnEntry

tmnxCpmCardExtnEntry 1.3.6.1.4.1.6527.6.2.2.2.6.8.2.1
Each row entry represents a CPM card or module in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations. When a tmnxChassisEntry is created, a tmnxCpmCardExtnEntry is created for each CPM card or module in that chassis. Before a tmnxChassisEntry can be deleted, each tmnxCpmCardEntry for that chassis must be in the proper state for removal.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxCpmCardExtnEntry  

tmnxCpmCardBootImageSource 1.3.6.1.4.1.6527.6.2.2.2.6.8.2.1.1
tmnxCpmCardBootImageSource indicates the compact flash slot where the Boot image file was found when the system last rebooted. For example, if the BOF file was found on compact flash slot 1, the value of this variable will be 'cf1:'
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

sysLoopbackNoServPort 1.3.6.1.4.1.6527.6.2.2.2.5.16.1
Second loopback port used for internal sap creation
Status: current Access: read-write
OBJECT-TYPE    
  TmnxPortID  

sysMirrorLoopbackNoServPort 1.3.6.1.4.1.6527.6.2.2.2.5.16.2
Loopback port for mirroring
Status: current Access: read-write
OBJECT-TYPE    
  TmnxPortID  

sysTestHdNoServPort 1.3.6.1.4.1.6527.6.2.2.2.5.16.3
Loopback port for testhead
Status: current Access: read-write
OBJECT-TYPE    
  TmnxPortID  

sysG8032FastFloodEnable 1.3.6.1.4.1.6527.6.2.2.2.5.17.1
Enable disable G.8032 fast flood enable
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sysResIngTcamSapIngAcl 1.3.6.1.4.1.6527.6.2.2.2.5.17.2
sysResIngTcamSapIngAcl sets the resource to be used for Sap Ingress Acl application
Status: current Access: read-write
OBJECT-TYPE    
  TSysResource  

sysResIngTcamIngAclMac 1.3.6.1.4.1.6527.6.2.2.2.5.17.3
sysResIngTcamIngAclMac sets the resource to be used for mac match from the allocated sysResIngTcamSapIngAcl
Status: current Access: read-write
OBJECT-TYPE    
  TSysResource  

sysResIngTcamIngAclIpv4 1.3.6.1.4.1.6527.6.2.2.2.5.17.4
sysResIngTcamIngAclIpv4 sets the resource to be used for ipv4 match from the allocated sysResIngTcamSapIngAcl
Status: current Access: read-write
OBJECT-TYPE    
  TSysResource  

sysResIngTcamIngAcl64bitIpv4Ipv6 1.3.6.1.4.1.6527.6.2.2.2.5.17.5
sysResIngTcamIngAcl64bitIpv4 sets the resource to be used for ipv6 64 bit match from the allocated sysResIngTcamSapIngAcl
Status: current Access: read-write
OBJECT-TYPE    
  TSysResource  

sysResIngTcamIngAcl128bitIpv4Ipv6 1.3.6.1.4.1.6527.6.2.2.2.5.17.6
sysResIngTcamIngAcl128bitIpv4Ipv6 sets the resource to be used for ipv6 128 bit match from the allocated sysResIngTcamSapIngAcl
Status: current Access: read-write
OBJECT-TYPE    
  TSysResource  

sysResIngTcamIngAcl64bitIpv6Only 1.3.6.1.4.1.6527.6.2.2.2.5.17.7
sysResIngTcamIngAcl64bitIpv6Only sets the resource to be used for Ipv6 64 bit match only from the allocated sysResIngTcamSapIngAcl
Status: current Access: read-write
OBJECT-TYPE    
  TSysResource  

sysResIngSapIngClass 1.3.6.1.4.1.6527.6.2.2.2.5.17.8
sysResIngSapIngClass sets the resource to be used for Sap Ingress classification
Status: current Access: read-write
OBJECT-TYPE    
  TSysResource  

sysResIngSapIngClassMac 1.3.6.1.4.1.6527.6.2.2.2.5.17.9
sysResIngSapIngClassMac sets the resource to be used for mac match from the allocated sysResIngSapIngClass
Status: current Access: read-write
OBJECT-TYPE    
  TSysResource  

sysResIngSapIngClassIpv4 1.3.6.1.4.1.6527.6.2.2.2.5.17.10
sysResIngSapIngClassIpv4 sets the resource to be used for ipv4 match from the allocated sysResIngSapIngClass
Status: current Access: read-write
OBJECT-TYPE    
  TSysResource  

sysResIngSapIngClassIpv4Ipv6 1.3.6.1.4.1.6527.6.2.2.2.5.17.11
sysResIngSapIngClassIpv4Ipv4Ipv6 sets the resource to be used for ipv4, ipv6 match from the allocated sysResIngSapIngClass
Status: current Access: read-write
OBJECT-TYPE    
  TSysResource  

sysResFabricPathBandwidth 1.3.6.1.4.1.6527.6.2.2.2.5.17.12
This object is used to configure the system fabric path bandwidth
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER lb1-11-lb2-25(1), lb1-24-lb2-12(2), lb1-25-lb2-11(3), lb1-18-lb2-18(4)  

sysResMaxIPv6Routes 1.3.6.1.4.1.6527.6.2.2.2.5.17.13
Specifies the number of routes to be reserved for use by IPv6. If the value is -1, then there is no limit.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..16000  

sysResIngTcamEthCfm 1.3.6.1.4.1.6527.6.2.2.2.5.17.14
sysResIngTcamEthCfm sets the resource to be used for Eth Cfm application
Status: current Access: read-write
OBJECT-TYPE    
  TSysResource  

sysResIngTcamEthCfmUpMep 1.3.6.1.4.1.6527.6.2.2.2.5.17.15
sysResIngTcamEthCfmUpMep sets the resource to be used for Up MEP from the allocated sysResIngTcamEthCfm
Status: current Access: read-write
OBJECT-TYPE    
  TSysResource  

sysG8032FastFloodEnableOperVal 1.3.6.1.4.1.6527.6.2.2.2.5.17.16
Shows current active value of sysG8032FastFloodEnable
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sysResEgrTcamSapEgrAcl 1.3.6.1.4.1.6527.6.2.2.2.5.17.17
sysResEgrTcamSapEgrAcl sets the resource to be used for Sap Egress Acl application
Status: current Access: read-write
OBJECT-TYPE    
  TSysResource  

sysResEgrTcamEgrAclMac 1.3.6.1.4.1.6527.6.2.2.2.5.17.18
sysResEgrTcamEgrAclMac sets the resource to be used for mac match from the allocated sysResEgrTcamSapEgrAcl
Status: current Access: read-write
OBJECT-TYPE    
  TSysResource  

sysResEgrTcamEgrAclIpv4 1.3.6.1.4.1.6527.6.2.2.2.5.17.19
sysResEgrTcamEgrAclIpv4 sets the resource to be used for ipv4 match from the allocated sysResEgrTcamSapEgrAcl
Status: current Access: read-write
OBJECT-TYPE    
  TSysResource  

sysResEgrTcamEgrAcl64bitIpv4Ipv6 1.3.6.1.4.1.6527.6.2.2.2.5.17.20
sysResEgrTcamEgrAcl64bitIpv4 sets the resource to be used for ipv6 64 bit match from the allocated sysResEgrTcamSapEgrAcl
Status: current Access: read-write
OBJECT-TYPE    
  TSysResource  

sysResEgrTcamEgrAcl128bitIpv4Ipv6 1.3.6.1.4.1.6527.6.2.2.2.5.17.21
sysResEgrTcamEgrAcl128bitIpv4Ipv6 sets the resource to be used for ipv6 128 bit match from the allocated sysResEgrTcamSapEgrAcl
Status: current Access: read-write
OBJECT-TYPE    
  TSysResource  

sysResEgrTcamEgrAcl64bitIpv6Only 1.3.6.1.4.1.6527.6.2.2.2.5.17.22
sysResEgrTcamEgrAcl64bitIpv6Only sets the resource to be used for Ipv6 64 bit match only from the allocated sysResEgrTcamSapEgrAcl
Status: current Access: read-write
OBJECT-TYPE    
  TSysResource  

sysResEgrSapEgrClass 1.3.6.1.4.1.6527.6.2.2.2.5.17.23
sysResEgrSapEgrClass sets the resource to be used for Sap Egress classification
Status: current Access: read-write
OBJECT-TYPE    
  TSysResource  

sysResEgrSapEgrClassMac 1.3.6.1.4.1.6527.6.2.2.2.5.17.24
sysResEgrSapEgrClassMac sets the resource to be used for mac match from the allocated sysResEgrSapEgrClass
Status: current Access: read-write
OBJECT-TYPE    
  TSysResource  

sysResEgrSapEgrClassIpv4 1.3.6.1.4.1.6527.6.2.2.2.5.17.25
sysResEgrSapEgrClassIpv4 sets the resource to be used for ipv4 match from the allocated sysResEgrSapEgrClass
Status: current Access: read-write
OBJECT-TYPE    
  TSysResource  

sysResEgrSapEgrClassIpv4Ipv6 1.3.6.1.4.1.6527.6.2.2.2.5.17.26
sysResEgrSapEgrClassIpv4Ipv4Ipv6 sets the resource to be used for ipv4, ipv6 match from the allocated sysResEgrSapEgrClass
Status: current Access: read-write
OBJECT-TYPE    
  TSysResource  

sysResIngTcamSapAggMeter 1.3.6.1.4.1.6527.6.2.2.2.5.17.27
sysResIngTcamSapAggMeter sets the resource to be used for sap-aggregate-meters
Status: current Access: read-write
OBJECT-TYPE    
  TSysResource  

sysResIngTcamSapAggMeterOperVal 1.3.6.1.4.1.6527.6.2.2.2.5.17.28
This object shows the operational value of sysResIngTcamSapAggMeter
Status: current Access: read-only
OBJECT-TYPE    
  TSysResource  

sysResQosSapIngQMode 1.3.6.1.4.1.6527.6.2.2.2.5.17.29
This object allows the user to switch between the current mode and 22Gig mode.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sysResQosSapIngQOperMode 1.3.6.1.4.1.6527.6.2.2.2.5.17.30
This object returns the current operational value of sysResQosSapIngQMode
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sysResRouterEcmpMaxRoutesDst 1.3.6.1.4.1.6527.6.2.2.2.5.17.31
Specifies the number of routes to be reserved for use by ECMP.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..16  

sysDhcpSnoopingSdpEnable 1.3.6.1.4.1.6527.6.2.2.2.5.17.32
Enable/disable dhcp snooping on SDPs
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sysDhcpSnoopingEnable 1.3.6.1.4.1.6527.6.2.2.2.5.17.33
Enable/disable dhcp snooping on the system. Currently for STU only.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sysResRouterEcmpMaxRoutesDstOperVal 1.3.6.1.4.1.6527.6.2.2.2.5.17.34
Specifies the operational value of number of routes to be reserved for use by ECMP.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Integer32 1..16  

sysResIpMacMatchEnable 1.3.6.1.4.1.6527.6.2.2.2.5.17.35
Resource allocation for ip mac match enable
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER -1 | 0..10  

sysG8032FastFlood 1.3.6.1.4.1.6527.6.2.2.2.5.17.40
sysG8032FastFlood sets max-slices of 1 to 5
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..8  

sysResIngTcamEthCfmDownMep 1.3.6.1.4.1.6527.6.2.2.2.5.17.51
sysResIngTcamEthCfmDownMep sets the resource to be used for Down MEP from the allocated sysResIngTcamEthCfm
Status: current Access: read-write
OBJECT-TYPE    
  TSysResource  

sysResQosMbsPool 1.3.6.1.4.1.6527.6.2.2.2.5.17.53
This object allows the user to set buffer allocation at node or port level. 'node' means no change in the buffer allocation and works without any decommission ports. 'port' means buffers will be divided and shared across ports. In absence of decommission, buffers will be equally divided. If decommission entries are present, the division will happen as per decommission logic. Refer to tResDecommTable
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER node(1), port(2)  

sysResIngTcamEthCfmUpMepPrimaryVlan 1.3.6.1.4.1.6527.6.2.2.2.5.17.54
sysResIngTcamEthCfmUpMepPrimaryVlan sets max-slices of 0 to 8
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..8  

sysResIngTcamEthCfmDownMepPrimaryVlan 1.3.6.1.4.1.6527.6.2.2.2.5.17.55
sysResIngTcamEthCfmDownMepPrimaryVlan sets max-slices of 0 to 8
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..8  

sysResRouterMaxIPSubnets 1.3.6.1.4.1.6527.6.2.2.2.5.17.56
Specifies the number of subnets to be reserved for IP.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..32000  

sysQosPortSchedModeEnable 1.3.6.1.4.1.6527.6.2.2.2.5.17.57
Enable disable qos port scheduler mode
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sysResMaxIPv6RoutesOperVal 1.3.6.1.4.1.6527.6.2.2.2.5.17.58
Specifies the number of routes to be reserved for use by IPv6. If the value is -1, then there is no limit.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -1..16000  

tResPlcyTable 1.3.6.1.4.1.6527.6.2.2.2.5.22.1
The tResPlcyTable has an entry for each user configured system resource policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TResPlcyEntry

tResPlcyEntry 1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1
An entry in this table would be created for every resource policy creation
Status: current Access: not-accessible
OBJECT-TYPE    
  TResPlcyEntry  

tResPlcyId 1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.1
system resource policy id
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..16  

tResPlcyRowStatus 1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.2
RowStatus of this policy entry
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tResPlcyIngTcamSapAggMeter 1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.3
Ingress tcam sap aggregate meter resource
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..2  

tResPlcyIngTcamQosSapIng 1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.4
Ingress tcam sap sap ingress resource
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..5  

tResPlcyIngTcamQosSapIngIpv4 1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.5
Ingress tcam sap ingress ipv4 resource
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER -1..5  

tResPlcyIngTcamQosSapIngIpv4Ipv6 1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.6
Ingress tcam sap ingress ipv4, ipv6 resource
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER -1..5  

tResPlcyIngTcamQosSapIngMac 1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.7
Ingress tcam sap ingress mac resource
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER -1..5  

tResPlcyIngTcamAclSapIng 1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.8
Ingress tcam acl sap ingress resource
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..5  

tResPlcyIngTcamAclSapIngIpv4 1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.9
Ingress tcam acl sap ingress ipv4 resource
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER -1..5  

tResPlcyIngTcamAclSapIng64Ipv6 1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.10
Ingress tcam acl sap ingress 64 bit ipv6 match resource
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER -1..5  

tResPlcyIngTcamAclSapIng128Ipv4Ipv6 1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.11
Ingress tcam acl sap ingress 128 bit ipv6 resource
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER -1..5  

tResPlcyIngTcamAclSapIngMac 1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.12
Ingress tcam acl sap ingress mac resource
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER -1..5  

tResPlcyEgrTcamAclSapEgr 1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.13
Egress tcam acl sap sap egress 1resource
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0 | 2  

tResPlcyEgrTcamAclSapEgrMacIpv4 1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.14
Egress tcam acl sap egress mac ipv4 resource
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0 | 2  

tResPlcyEgrTcamAclSapEgr128Ipv6 1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.15
Egress tcam acl sap egress 128bit ipv6 resource
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0 | 2  

tResPlcyEgrTcamAclSapEgr64MacIpv6 1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.16
Egress tcam acl sap egress mac resource
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0 | 2  

tResPlcyEgrTcamAclSapEgrMac 1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.17
Egress tcam acl sap egress mac resource
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0 | 2  

tResPlcyDescription 1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.18
user-provided description of the policy.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tResPlcyLastChanged 1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.19
timestamp of last change to this row.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tResPlcyIngTcamEthCfm 1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.20
Ingress tcam eth cfm resource
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..3  

tResPlcyIngTcamEthCfmUpMep 1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.21
Ingress tcam eth cfm up-mep resource
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..7  

tResPlcyG8032CtrlSapStartVlan 1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.22
G8032 control sap tag start vlan
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0 | 3000..3512  

tResPlcyG8032CtrlSapEndVlan 1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.23
G8032 control sap tag End vlan
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0 | 3000..3512  

tResPlcyResIpMacMatchEnable 1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.24
Resource allocation for ip mac match enable
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER -1 | 0..10  

tResPlcyIngTcamEthCfmDownMep 1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.25
Ingress tcam eth cfm down-mep resource
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..3  

tResPlcyIngTcamEthCfmUpMepEnable 1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.27
Enable/Disable Up Mep
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tResPlcyIngTcamEthCfmDownMepEnable 1.3.6.1.4.1.6527.6.2.2.2.5.22.1.1.28
Enable/Disable Down Mep
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tResDecommTable 1.3.6.1.4.1.6527.6.2.2.2.5.23.1
The tResDecommTable has an entry for each user configured system decommissioned resource port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TResDecommEntry

tResDecommEntry 1.3.6.1.4.1.6527.6.2.2.2.5.23.1.1
An entry in this table would be created for every decommissioned entry created
Status: current Access: not-accessible
OBJECT-TYPE    
  TResDecommEntry  

tResDecommId 1.3.6.1.4.1.6527.6.2.2.2.5.23.1.1.1
system resource decommision id
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..30  

tResDecommRowStatus 1.3.6.1.4.1.6527.6.2.2.2.5.23.1.1.2
RowStatus of this policy entry
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tResDecommFromPortMap 1.3.6.1.4.1.6527.6.2.2.2.5.23.1.1.3
tResDecommFromPortMap is the bit map of ports that are decommissioned
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

tResDecommToPortMap 1.3.6.1.4.1.6527.6.2.2.2.5.23.1.1.4
tResDecommToPortMap is the bit map of ports that are are allocated the resources freed up by the ports in tResDecommFromPortMap
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

tResDecommOperTable 1.3.6.1.4.1.6527.6.2.2.2.5.23.2
The tResDecommOperTable has an entry for each user configured system decommissioned resource port. This table is updated only at boot time, the entries in this table will match the entries available in tResDecommTable until administrative decommission entries are modified by the user
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TResDecommOperEntry

tResDecommOperEntry 1.3.6.1.4.1.6527.6.2.2.2.5.23.2.1
An entry in this table would be created for every decommissioned entry created
Status: current Access: not-accessible
OBJECT-TYPE    
  TResDecommOperEntry  

tResDecommOperId 1.3.6.1.4.1.6527.6.2.2.2.5.23.2.1.1
system resource decommision id
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..30  

tResDecommOperFromPortMap 1.3.6.1.4.1.6527.6.2.2.2.5.23.2.1.2
tResDecommOperFromPortMap is the bit map of ports that are decommissioned
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tResDecommOperToPortMap 1.3.6.1.4.1.6527.6.2.2.2.5.23.2.1.3
tResDecommOperToPortMap is the bit map of ports that are are allocated the resources freed up by the ports in tResDecommFromPortMap
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sysQosWredSlopes 1.3.6.1.4.1.6527.6.2.2.2.5.20.1
When tcp-non-tcp is set, 3 WRED slopes are used per queue. When high-low is set, 2 slopes are used per queue for both tcp and non-tcp traffic
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER high-low(1), tcp-non-tcp(2)  

sysOperGrpTblLastChanged 1.3.6.1.4.1.6527.6.2.2.2.5.24.1
The value of sysOperGrpTblLastChanged indicates the sysUpTime at the time of the last modification of sysOperGrpTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sysOperGrpTable 1.3.6.1.4.1.6527.6.2.2.2.5.24.2
A table that contains Operational-Group information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SysOperGrpEntry

sysOperGrpEntry 1.3.6.1.4.1.6527.6.2.2.2.5.24.2.1
Each row specifies information about a specific Operational-Group.
Status: current Access: not-accessible
OBJECT-TYPE    
  SysOperGrpEntry  

sysOperGrpName 1.3.6.1.4.1.6527.6.2.2.2.5.24.2.1.1
The value of the object sysOperGrpName specifies the Operational-Group identifier.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

sysOperGrpRowStatus 1.3.6.1.4.1.6527.6.2.2.2.5.24.2.1.2
This value of the object sysOperGrpRowStatus specifies the status of this row.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

sysOperGrpLastChange 1.3.6.1.4.1.6527.6.2.2.2.5.24.2.1.3
The value of sysOperGrpLastChange indicates the timestamp of last change to this row in sysOperGrpTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sysOperGrpOperStatus 1.3.6.1.4.1.6527.6.2.2.2.5.24.2.1.4
The value of sysOperGrpOperStatus indicates the operational state of this group.
Status: current Access: read-only
OBJECT-TYPE    
  ServiceOperStatus  

sysOperGrpHoldDownTime 1.3.6.1.4.1.6527.6.2.2.2.5.24.2.1.5
The value of sysOperGrpHoldDownTime specifies number of seconds to wait before notifying clients monitoring this group when its operational status transitions from up to down.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxOperGrpHoldDownTime  

sysOperGrpCreationOrigin 1.3.6.1.4.1.6527.6.2.2.2.5.24.2.1.6
The value of sysOperGrpCreationOrigin indicates the protocol or mechanism which created this group.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxSysOperGrpCreationOrigin  

sysOperGrpHoldUpTime 1.3.6.1.4.1.6527.6.2.2.2.5.24.2.1.7
The value of sysOperGrpHoldUpTime specifies number of seconds to wait before notifying clients monitoring this group when its operational status transitions from down to up.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxOperGrpHoldUpTime  

sysOperGrpHoldUpTimeRemain 1.3.6.1.4.1.6527.6.2.2.2.5.24.2.1.8
The value of sysOperGrpHoldUpTimeRemain indicates the number of seconds remaining in the sysOperGrpHoldUpTime.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxOperGrpHoldUpTime  

sysOperGrpHoldDownTimeRemain 1.3.6.1.4.1.6527.6.2.2.2.5.24.2.1.9
The value of sysOperGrpHoldDownTimeRemain indicates the number of seconds remaining in the sysOperGrpHoldDownTime.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxOperGrpHoldDownTime  

sysOperGrpNumMembers 1.3.6.1.4.1.6527.6.2.2.2.5.24.2.1.10
The value of sysOperGrpNumMembers indicates the number of members as part of this operational-group.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sysOperGrpNumMonitoring 1.3.6.1.4.1.6527.6.2.2.2.5.24.2.1.11
The value of sysOperGrpNumMonitoring indicates the number of objects monitoring this operational-group.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

tmnxEnvTempTooLow 1.3.6.1.4.1.6527.6.2.2.2.6.2.1
Generated when the temperature sensor reading on an equipment object is lesser than its configured threshold.
Status: current Access: read-only
NOTIFICATION-TYPE    

tmnxEqMDACfgMissing 1.3.6.1.4.1.6527.6.2.2.2.6.2.5
Generated when a supported MDA is inserted into a slot, but the current configuration is not sufficient for the MDA to operate.
Status: current Access: read-only
NOTIFICATION-TYPE    

tmnxVwmShelfInserted 1.3.6.1.4.1.6527.6.2.2.2.6.2.6
Generated when the vwm-shelf is inserted
Status: current Access: read-only
NOTIFICATION-TYPE    

tmnxVwmShelfIdMismatch 1.3.6.1.4.1.6527.6.2.2.2.6.2.7
tmnxVwmShelfIdMismatch is when the vwm-shelf configured by the user does not match the rotary switch setting
Status: current Access: read-only
NOTIFICATION-TYPE    

tmnxVwmShelfRemoved 1.3.6.1.4.1.6527.6.2.2.2.6.2.8
Generated when the vwm-shelf is removed
Status: current Access: read-only
NOTIFICATION-TYPE    

tmnxUsbUnknownDev 1.3.6.1.4.1.6527.6.2.2.2.6.2.9
Generated when unsupported USB device is inserted into a 7210 device
Status: current Access: read-only
NOTIFICATION-TYPE    

tmnxVwmShelfCardInserted 1.3.6.1.4.1.6527.6.2.2.2.6.2.11
Generated when a VWM shelf line card is inserted.
Status: current Access: read-only
NOTIFICATION-TYPE    

tmnxVwmShelfCardRemoved 1.3.6.1.4.1.6527.6.2.2.2.6.2.12
Generated when a VWM shelf line card is removed.
Status: current Access: read-only
NOTIFICATION-TYPE    

tmnxVwmShelfCardIdMismatch 1.3.6.1.4.1.6527.6.2.2.2.6.2.13
Generated when there is a VWM shelf line card mismatch with configured id.
Status: current Access: read-only
NOTIFICATION-TYPE    

tmnxVwmShelfPSInputFailure 1.3.6.1.4.1.6527.6.2.2.2.6.2.14
Generated when there is a input power supply failure on VWM shelf
Status: current Access: read-only
NOTIFICATION-TYPE    

tmnxVwmShelfPSOutputFailure 1.3.6.1.4.1.6527.6.2.2.2.6.2.15
Generated when there is a output power supply failure on VWM shelf
Status: current Access: read-only
NOTIFICATION-TYPE    

tmnxVwmShelfInputLoss 1.3.6.1.4.1.6527.6.2.2.2.6.2.16
Generated when there is a loss on VWM shelf input
Status: current Access: read-only
NOTIFICATION-TYPE    

tmnxVwmShelfOutputLoss 1.3.6.1.4.1.6527.6.2.2.2.6.2.17
Generated when there is a loss on VWM shelf output
Status: current Access: read-only
NOTIFICATION-TYPE    

tmnxVwmShelfCardCfgError 1.3.6.1.4.1.6527.6.2.2.2.6.2.18
Generated when the vwm shelf inserted does not match with configured shelf id, card
Status: current Access: read-only
NOTIFICATION-TYPE    

tmnxAlarmInputVoltageFailure 1.3.6.1.4.1.6527.6.2.2.2.6.2.10
Generated when the internal alam input voltage fails
Status: current Access: read-only
NOTIFICATION-TYPE    

tmnxRootDirFull 1.3.6.1.4.1.6527.6.2.2.2.6.2.2
Generated when the dosfs root directory is full, number of files in root directory has reached the threshold limit.
Status: current Access: read-only
NOTIFICATION-TYPE    

tSASMpointBwPlcy 1.3.6.1.4.1.6527.6.2.2.2.5.15.1
The value of multipoint bandwidth management policy.
Status: current Access: read-write
OBJECT-TYPE    
  TNamedItem  

tmnxPtpTimeUsePtp 1.3.6.1.4.1.6527.6.2.2.2.5.21.1
If this object is configured with 'system', ptp derived time (in UTC timescale) is used for all the system applications that need time, including the timestamps needed for OAM tools. If configured with 'oam', the system will use the PTP derived time (in UTC timescale) for only the timestamps needed by OAM. By default NTP derived time is used for all system applications. If NTP is not configured, then the system RTC is used for obtaining timestmaps in UTC timescale for all system applications
Status: current Access: read-write
OBJECT-TYPE    
  TmnxPtpTime  

tmnxSysConsoleAlarmInput 1.3.6.1.4.1.6527.6.2.2.2.5.18.2
Enable/Disable Console Alarm Input
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tmnxDyingGasp 1.3.6.1.4.1.6527.6.2.2.3.1.3.1
tmnxDyingGasp trap is generated when the system goes down due to power failure. System would make best effort to send out this trap with the power remaining in Dying Gasp capacitor
Status: current Access: read-write
NOTIFICATION-TYPE    

tmnxVwmShelfTable 1.3.6.1.4.1.6527.6.2.2.2.5.19.1
The tmnxVwmShelfTable contains an entry for each VWM shelf in the device
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxVwmShelfEntry

tmnxVwmShelfEntry 1.3.6.1.4.1.6527.6.2.2.2.5.19.1.1
Each row entry contains information about a VWM shelf Entries in this table can be created and deleted via SNMP SET operations to tmnxVwmShelfRowStatus.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxVwmShelfEntry  

tmnxVwmShelfId 1.3.6.1.4.1.6527.6.2.2.2.5.19.1.1.1
Shelf ID of the VWM Shelf
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER 0..7  

tmnxVwmShelfRowStatus 1.3.6.1.4.1.6527.6.2.2.2.5.19.1.1.2
tmnxVwmShelfRowStatus controls the creation and deletion of rows in the table. To create a row in this table, set the row status to createAndGo(4)'.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tmnxVwmShelfAdminState 1.3.6.1.4.1.6527.6.2.2.2.5.19.1.1.3
The value of tmnxVwmShelfAdminState specifies the administrative state of the VWM shelf.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxAdminState  

tmnxVwmShelfOperState 1.3.6.1.4.1.6527.6.2.2.2.5.19.1.1.4
The value of tmnxVwmShelfOperState specifies the operational state of the VWM shelf.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxAdminState  

tmnxVwmShelfVwmType 1.3.6.1.4.1.6527.6.2.2.2.5.19.1.1.5
The value of tmnxVwmShelfVwmType specifies the vwm shelf type.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ec-cw(1), ec-dw(2)  

tmnxVwmShelfEquippedType 1.3.6.1.4.1.6527.6.2.2.2.5.19.1.1.6
The value of tmnxVwmshelfTypeConnected specifies the vwm shelf type.equipped to the system.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER not-equipped(0), unknown(1), cwdm(2), dwdm(4)  

tmnxVwmshelfTypeConnected 1.3.6.1.4.1.6527.6.2.2.2.5.19.1.1.7
The value of tmnxVwmshelfTypeConnected specifies the vwm shelf optical type.connected to the system.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER usb(1), i2c(2)  

tmnxVwmShelfCardTable 1.3.6.1.4.1.6527.6.2.2.2.5.19.2
The tmnxVwmShelfCardTable contains an entry for each VWM shelf slot in the device
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxVwmShelfCardEntry

tmnxVwmShelfCardEntry 1.3.6.1.4.1.6527.6.2.2.2.5.19.2.1
Each row entry contains information about a VWM shelf slot Entries in this table can be created and deleted via SNMP SET operations to tmnxVwmShelfRowStatus.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxVwmShelfCardEntry  

tmnxVwmShelfCardId 1.3.6.1.4.1.6527.6.2.2.2.5.19.2.1.1
Slot ID of the VWM Shelf slot
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER 1..7  

tmnxVwmShelfCardType 1.3.6.1.4.1.6527.6.2.2.2.5.19.2.1.2
tmnxVwmShelfCardType is the vwm slot type that is being configured by user
Status: current Access: read-write
OBJECT-TYPE    
  TmnxVwmCardType  

tmnxVwmShelfCardEqType 1.3.6.1.4.1.6527.6.2.2.2.5.19.2.1.3
tmnxVwmShelfCardEqType is the vwm slot type that is being provisioned
Status: current Access: read-only
OBJECT-TYPE    
  TmnxVwmCardType  

tmnxVwmShelfCardAdminState 1.3.6.1.4.1.6527.6.2.2.2.5.19.2.1.4
The value of tmnxVwmShelfCardAdminState specifies the administrative state of the VWM shelf slot.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxAdminState  

tmnxVwmShelfCardOperState 1.3.6.1.4.1.6527.6.2.2.2.5.19.2.1.5
The value of tmnxVwmShelfCardOperState specifies the operational state of the VWM shelf slot.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxAdminState  

aluExtTmnxChassisTable 1.3.6.1.4.1.6527.6.2.2.2.6.9
The chassis table has an entry for each chassis in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AluExtTmnxChassisEntry

aluExtTmnxChassisEntry 1.3.6.1.4.1.6527.6.2.2.2.6.9.1
Each row entry represents a chassis in the system. The agent creates the row for the first chassis in the system, with tmnxChassisIndex = 1, which is auto-discovered by the active CPM card. Additional chassis entries can be created and deleted via SNMP SET operations. Creation requires a SET request containing at least tmnxChassisAdminMode and tmnxChassisRowStatus. Note that the first Alcatel 7x50 series product release does not support multiple chassis, therefore there will not be more than one row entry in this table; attempts to create additional rows in this table will be denied.
Status: current Access: not-accessible
OBJECT-TYPE    
  AluExtTmnxChassisEntry  

aluExtPoePowerMode 1.3.6.1.4.1.6527.6.2.2.2.6.9.1.3
aluExtPoePowerMode represents set of poe capabilities, the mode is general for all MDAs, ports
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), internal(1), external(2)  

aluExtPoePowerSupplyStatus 1.3.6.1.4.1.6527.6.2.2.2.6.9.1.4
Current status of the PoE Power Supply.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), bad(1), good(2)  

aluExtPoeExternalPowerSupplyStatus 1.3.6.1.4.1.6527.6.2.2.2.6.9.1.5
Current status of the PoE External Power Supply connection
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER absent(0), present(1)  

tCardResOperTable 1.3.6.1.4.1.6527.6.2.2.2.6.10
The tCardResOperTable has an entry for each CPM card or module in each chassis in the TMNX system, this table provides the operations system resource values used on the card
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TCardResOperEntry

tCardResOperEntry 1.3.6.1.4.1.6527.6.2.2.2.6.10.1
Each row entry represents a CPM card or module in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations. When a tmnxChassisEntry is created, a tCardResOperEntry is created for each CPM card or module in that chassis. Before a tmnxChassisEntry can be deleted, each tCardResOperEntry for that chassis must be in the proper state for removal.
Status: current Access: not-accessible
OBJECT-TYPE    
  TCardResOperEntry  

tCardResOperIngTcamSapAggMeter 1.3.6.1.4.1.6527.6.2.2.2.6.10.1.1
Ingress tcam sap aggregate meter resource
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..2  

tCardResOperIngTcamQosSapIng 1.3.6.1.4.1.6527.6.2.2.2.6.10.1.2
Ingress tcam sap sap ingress resource
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..5  

tCardResOperIngTcamQosSapIngIpv4 1.3.6.1.4.1.6527.6.2.2.2.6.10.1.3
Ingress tcam sap ingress ipv4 resource
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER -1..5  

tCardResOperIngTcamQosSapIngIpv4Ipv6 1.3.6.1.4.1.6527.6.2.2.2.6.10.1.4
Ingress tcam sap ingress ipv4, ipv6 resource
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

tCardResOperIngTcamQosSapIngMac 1.3.6.1.4.1.6527.6.2.2.2.6.10.1.5
Ingress tcam sap ingress mac resource
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER -1..5  

tCardResOperIngTcamAclSapIng 1.3.6.1.4.1.6527.6.2.2.2.6.10.1.6
Ingress tcam acl sap ingress resource
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..5  

tCardResOperIngTcamAclSapIngIpv4 1.3.6.1.4.1.6527.6.2.2.2.6.10.1.7
Ingress tcam acl sap ingress ipv4 resource
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER -1..5  

tCardResOperIngTcamAclSapIng64Ipv6 1.3.6.1.4.1.6527.6.2.2.2.6.10.1.8
Ingress tcam acl sap ingress 64 bit ipv6 match resource
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER -1..5  

tCardResOperIngTcamAclSapIng128Ipv4Ipv6 1.3.6.1.4.1.6527.6.2.2.2.6.10.1.9
Ingress tcam acl sap ingress 128 bit ipv6 resource
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER -1..5  

tCardResOperIngTcamAclSapIngMac 1.3.6.1.4.1.6527.6.2.2.2.6.10.1.10
Ingress tcam acl sap ingress mac resource
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER -1..5  

tCardResOperEgrTcamAclSapEgr 1.3.6.1.4.1.6527.6.2.2.2.6.10.1.11
Egress tcam acl sap sap egress 1resource
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0 | 2  

tCardResOperEgrTcamAclSapEgrMacIpv4 1.3.6.1.4.1.6527.6.2.2.2.6.10.1.12
Egress tcam acl sap egress mac ipv4 resource
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0 | 2  

tCardResOperEgrTcamAclSapEgr128Ipv6 1.3.6.1.4.1.6527.6.2.2.2.6.10.1.13
Egress tcam acl sap egress 128bit ipv6 resource
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0 | 2  

tCardResOperEgrTcamAclSapEgr64MacIpv6 1.3.6.1.4.1.6527.6.2.2.2.6.10.1.14
Egress tcam acl sap egress mac resource
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0 | 2  

tCardResOperEgrTcamAclSapEgrMac 1.3.6.1.4.1.6527.6.2.2.2.6.10.1.15
Egress tcam acl sap egress mac resource
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0 | 2  

tCardResOperIngTcamEthCfm 1.3.6.1.4.1.6527.6.2.2.2.6.10.1.18
Ingress tcam eth cfm resource
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..3  

tCardResOperIngTcamEthCfmUpMep 1.3.6.1.4.1.6527.6.2.2.2.6.10.1.19
Ingress tcam eth cfm up-mep resource
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

tCardResOperG8032CtrlSapStartVlan 1.3.6.1.4.1.6527.6.2.2.2.6.10.1.20
G8032 control sap tag start vlan
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4094  

tCardResOperG8032CtrlSapEndVlan 1.3.6.1.4.1.6527.6.2.2.2.6.10.1.21
G8032 control sap tag End vlan
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4094  

tCardResOperResIpMacMatchEnable 1.3.6.1.4.1.6527.6.2.2.2.6.10.1.22
Resource allocation for ip mac match enable
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER -1 | 0..10  

tCardResOperIngTcamEthCfmDownMep 1.3.6.1.4.1.6527.6.2.2.2.6.10.1.23
Ingress tcam eth cfm down-mep resource
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..3  

tCardResOperIngTcamIpMulticast 1.3.6.1.4.1.6527.6.2.2.2.6.10.1.24
tCardResOperIngTcamIpMulticast sets the resource to be used for ip-multicast.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

tmnxSASSecurityNotificationObjs 1.3.6.1.4.1.6527.6.2.2.2.15.5
OBJECT IDENTIFIER    

tmnxLoginUserName 1.3.6.1.4.1.6527.6.2.2.2.15.5.1
The value of tmnxUserName specifies the name for a system user. This name must be unique amongst the table entries. tmnxUserName will be sent in the notifications when the user crosses the threshold login attempts configured in tmnxPasswordAttemptsCount
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  TNamedItem Size(1..20)  

tmnxLoginUserSrcIPAddress 1.3.6.1.4.1.6527.6.2.2.2.15.5.2
The value of tmnxLoginUserSrcIPAddress specifies the source address of the client station from where the user has tried to login
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

tmnxLoginMaxAttempts 1.3.6.1.4.1.6527.6.2.2.2.15.5.3
The value of tmnxLoginMaxAttempts specifies the number of times user could attempt to login before raising a max attempt trap
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER  

tmnxUserLoginMaxAttempts 1.3.6.1.4.1.6527.6.2.2.3.2.0.1
The tmnxUserLoginMaxAttempts is generated when a user failed to authenticate in more than the permitted number of login retries.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxSSHUserLoginMaxAttempts 1.3.6.1.4.1.6527.6.2.2.3.2.0.3
The tmnxSSHUserLoginMaxAttempts is generated when a user failed to authenticate in more than the permitted number of login retries through SSH.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxEqPowerInputFailure 1.3.6.1.4.1.6527.6.2.2.2.6.2.3
Generated when one of the chassis's power source supplies fails.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxEqPowerOutputFailure 1.3.6.1.4.1.6527.6.2.2.2.6.2.4
Generated when one of the chassis's power output fails.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

sysOperGrpOperStatusChanged 1.3.6.1.4.1.6527.6.2.2.2.6.2.25
[CAUSE] The svcOperGrpOperStatusChanged notification is generated when there is a change in the value of svcOperGrpOperStatus. [EFFECT] Status of the one or more of the members of the operational group has changed. [RECOVERY] Operational status of the members of the operational-group will need to be investigated.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxChassisNotifyMDACfgFailReason 1.3.6.1.4.1.6527.6.2.2.2.15.5.4
Used by tmnxEqMDACfgMissing, the value of tmnxChassisNotifyMDACfgFailReason contains the reason for MDA config failure.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString  

tmnxSASSysCompliances 1.3.6.1.4.1.6527.6.2.2.1.3.1
OBJECT IDENTIFIER    

tmnxSASSysGroups 1.3.6.1.4.1.6527.6.2.2.1.3.2
OBJECT IDENTIFIER    

tmnxSASSysSecConformance 1.3.6.1.4.1.6527.6.2.2.1.3.4
OBJECT IDENTIFIER    

tmnxSASSysSecGroups 1.3.6.1.4.1.6527.6.2.2.1.3.4.1
OBJECT IDENTIFIER    

tmnxSASChassisGroups 1.3.6.1.4.1.6527.6.2.2.1.10
OBJECT IDENTIFIER    

tmnxSASSysV1v0Group 1.3.6.1.4.1.6527.6.2.2.1.3.2.1
sas system group object definition for first release
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

tmnxSASSysV2v0Group 1.3.6.1.4.1.6527.6.2.2.1.3.2.2
sas system group object definition for 2.0 release
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxSASSysV3v0Group 1.3.6.1.4.1.6527.6.2.2.1.3.2.3
sas system group object definition for 3.0 release
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxSASSysV4v0Group 1.3.6.1.4.1.6527.6.2.2.1.3.2.4
sas system group object definition for 4.0 release
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxSASSysV5v0Group 1.3.6.1.4.1.6527.6.2.2.1.3.2.5
sas system group object definition for 5.0 release
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxSASSysObjsV6v0Group 1.3.6.1.4.1.6527.6.2.2.1.3.2.6
sas system group object definition for 5.0 release
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxSASSysQosV5v0Group 1.3.6.1.4.1.6527.6.2.2.1.3.2.7
sas system group object definition for 5.0 release
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxSASSysV6v0Group 1.3.6.1.4.1.6527.6.2.2.1.3.2.8
sas system group object definition for 6.0 release
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxSASSysConsoleV6v0Group 1.3.6.1.4.1.6527.6.2.2.1.3.2.9
sas system group object definition for 6.0 release
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxSASSysResPlcyV6v1Group 1.3.6.1.4.1.6527.6.2.2.1.3.2.10
sas system resource policy group object definition for 6.1 release
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxSASSysSecV4v0Group 1.3.6.1.4.1.6527.6.2.2.1.3.4.1.1
sas system security group object definition for 4.0 release
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxSASSysSecNotifyV4v0Group 1.3.6.1.4.1.6527.6.2.2.1.3.4.1.2
The group of notifications supported in 7210 4.0 release
Status: current Access: accessible-for-notify
NOTIFICATION-GROUP    

tmnxSASChassisNotificationV3v0Group 1.3.6.1.4.1.6527.6.2.2.1.10.1
The group of notifications supported in 7210 3.0 release
Status: current Access: accessible-for-notify
NOTIFICATION-GROUP    

tmnxSASChassisGroup 1.3.6.1.4.1.6527.6.2.2.1.10.2
The group of notifications supported in 7210 5.0 release
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxSASChassisV61Group 1.3.6.1.4.1.6527.6.2.2.1.10.3
The group of notifications supported in 7210 6.1 release
Status: current Access: accessible-for-notify
OBJECT-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor