TIMETRA-SAS-SERV-MIB

File: TIMETRA-SAS-SERV-MIB.mib (43259 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
TIMETRA-SAP-MIB TIMETRA-SERV-MIB TIMETRA-SAS-GLOBAL-MIB
TIMETRA-SAS-QOS-MIB TIMETRA-TC-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Gauge32 Integer32 Unsigned32
IpAddress TimeTicks Counter64
Counter32 MODULE-COMPLIANCE OBJECT-GROUP
NOTIFICATION-GROUP TEXTUAL-CONVENTION DisplayString
RowStatus MacAddress TimeStamp
TruthValue RowPointer DateAndTime
sapBaseStatsEntry sapBaseInfoEntry sapEgrQosQueueStatsEntry
sapIngQosQueueStatsEntry sapPortId sapEncapValue
sapIngQosQueueInfoEntry svcBaseInfoEntry svcId
iesIfIndex timetraSASObjs timetraSASNotifyPrefix
timetraSASConfs timetraSASModules TMeterRateMode
TIngressBurstSize TIngressPIRRate TIngressCIRRate
TMeterMode TAdaptationRule TSapIngressMeterId
TmnxServId TNamedItem TWeight
TLevelOrDefault

Defined Types

TSapIngressAggrMeterBurstSize  
The amount of buffer space (in Kbits) assigned to a meter. The value -1 means default value
TEXTUAL-CONVENTION    
  INTEGER -1 | 4..2146959  

TSapIngressAggShaperRateCIRsize  
The CIR rate to be used in kbps. The value -1 means maximum rate.
TEXTUAL-CONVENTION    
  INTEGER -1 | 0..20000000  

TSapIngressAggShaperRatePIRsize  
The PIR rate to be used in kbps. The value -1 means maximum rate.
TEXTUAL-CONVENTION    
  INTEGER -1 | 1..20000000  

TSapAggShaperRateCIRsize  
The rate to be used in kbps. The value -1 means maximum rate.
TEXTUAL-CONVENTION    
  INTEGER -1 | 0..20000000  

TSapAggShaperRatePIRsize  
The rate to be used in kbps. The value -1 means maximum rate.
TEXTUAL-CONVENTION    
  INTEGER -1 | 1..20000000  

TQosMeterAttribute  
Indicates attributes of a QoS meter
TEXTUAL-CONVENTION    
  BITS cbs(0), cir(1), cirAdaptRule(2), mbs(3), pir(4), pirAdaptRule(5), rateMode(6), colorMode(7)  

SapBaseStatsExtnEntry  
SEQUENCE    
  sapBaseStatsQosClassifiersUsed Unsigned32
  sapBaseStatsQosMetersUsed Unsigned32
  sapBaseStatsIngressForwardedPackets Counter64
  sapBaseStatsIngressForwardedOctets Counter64
  sapBaseStatsEgressForwardedPackets Counter64
  sapBaseStatsEgressForwardedOctets Counter64
  sapBaseStatsIngressExtraTagDroppedPackets Counter64
  sapBaseStatsIngressExtraTagDroppedOctets Counter64
  sapBaseStatsIngressDroppedPackets Counter64
  sapBaseStatsIngressDroppedOctets Counter64

SapBaseInfoExtnEntry  
SEQUENCE    
  sapBaseInfoEgressStatsPktsMode TruthValue
  sapBaseInfoIngressCounterMode INTEGER
  sapBaseInfoIngressAggregateMeterRate INTEGER
  sapBaseInfoIngressAggregateMeterBurst TSapIngressAggrMeterBurstSize
  sapBaseInfoIngressWithAggregateMeter TruthValue
  sapBaseInfoIngressExtraTagDropCount TruthValue
  sapBaseInfoEgressStatsEnable TruthValue
  sapBaseInfoIngressStatsEnable TruthValue
  sapBaseInfoIngressCounterType INTEGER
  sapBaseInfoIngressFabricPath INTEGER
  sapBaseInfoEthRingShgEnable TruthValue
  sapBaseInfoIngressAggShaperRateCIR TSapIngressAggShaperRateCIRsize
  sapBaseInfoIngressAggShaperRatePIR TSapIngressAggShaperRatePIRsize
  sapBaseInfoEgressAggShaperRateCIR TSapAggShaperRateCIRsize
  sapBaseInfoEgressAggShaperRatePIR TSapAggShaperRatePIRsize
  sapEgressAggRateLimitCIR Integer32
  sapEgressAggRateLimitPIR Integer32

SvcBaseInfoExtnEntry  
SEQUENCE    
  svcMtuCheck TruthValue
  svcSapType INTEGER
  svcUplinkType INTEGER
  svcCustomerVid INTEGER
  svcEpipeType INTEGER
  svcAllowL2ptXstpBpdu INTEGER
  svcbVplsVid INTEGER

SapEgrQosQueueStatsExtnEntry  
SEQUENCE    
  sapEgrQosQueueStatsFwdPkts Counter64
  sapEgrQosQueueStatsFwdOcts Counter64
  sapEgrQosQueueStatsInprofDroPkts Counter64
  sapEgrQosQueueStatsInprofDroOcts Counter64
  sapEgrQosQueueStatsOutprofDroPkts Counter64
  sapEgrQosQueueStatsOutprofDroOcts Counter64

SapIngQosQueueStatsExtnEntry  
SEQUENCE    
  sapIngQosQueueStatsFwdPkts Counter64
  sapIngQosQueueStatsFwdOcts Counter64
  sapIngQosQueueStatsInprofDroPkts Counter64
  sapIngQosQueueStatsInprofDroOcts Counter64
  sapIngQosQueueStatsOutprofDroPkts Counter64
  sapIngQosQueueStatsOutprofDroOcts Counter64

SapIngQosMeterInfoEntry  
SEQUENCE    
  sapIngQosMeterOvId TSapIngressMeterId
  sapIngQosMeterRowStatus RowStatus
  sapIngQosMeterLastMgmtChange TimeStamp
  sapIngQosMeterOverrideFlags TQosMeterAttribute
  sapIngQosMeterAdminCBS TIngressBurstSize
  sapIngQosMeterAdminMBS TIngressBurstSize
  sapIngQosMeterCIRAdaptation TAdaptationRule
  sapIngQosMeterPIRAdaptation TAdaptationRule
  sapIngQosMeterAdminPIR TIngressPIRRate
  sapIngQosMeterAdminCIR TIngressCIRRate
  sapIngQosMeterRateMode TMeterRateMode
  sapIngQosMeterOperPIR TIngressPIRRate
  sapIngQosMeterOperCIR TIngressCIRRate
  sapIngQosMeterRateColorMode INTEGER

SapIngQosQueueInfoExtnEntry  
SEQUENCE    
  sapIngQosQPolicyName TNamedItem
  sapIngQosQPIRWeight TWeight
  sapIngQosQCIRLevel TLevelOrDefault

Defined Values

timetraSASServicesMIBModule 1.3.6.1.4.1.6527.6.2.1.1.9
This document is the SNMP MIB module to manage and provision the various services of the Alcatel 7x50 SR system. Copyright 2003-2014 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel's proprietary intellectual property. Alcatel retains all title and ownership in the Specification, including any revisions. Alcatel grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied `as is', and Alcatel makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
MODULE-IDENTITY    

tmnxSASServObjs 1.3.6.1.4.1.6527.6.2.2.2.8
OBJECT IDENTIFIER    

tmnxSASSapObjs 1.3.6.1.4.1.6527.6.2.2.2.8.1
OBJECT IDENTIFIER    

tmnxSASSvcObjs 1.3.6.1.4.1.6527.6.2.2.2.8.2
OBJECT IDENTIFIER    

tmnxSASSvcTraps 1.3.6.1.4.1.6527.6.2.2.2.8.3
OBJECT IDENTIFIER    

tmnxSASSvcNotifyObjs 1.3.6.1.4.1.6527.6.2.2.2.8.4
OBJECT IDENTIFIER    

tmnxSASServConformance 1.3.6.1.4.1.6527.6.2.2.1.5
OBJECT IDENTIFIER    

tmnxSASSapConformance 1.3.6.1.4.1.6527.6.2.2.1.5.1
OBJECT IDENTIFIER    

tmnxSASServGroups 1.3.6.1.4.1.6527.6.2.2.1.5.2
OBJECT IDENTIFIER    

tmnxSASSapCompliances 1.3.6.1.4.1.6527.6.2.2.1.5.1.1
OBJECT IDENTIFIER    

tmnxSASSapGroups 1.3.6.1.4.1.6527.6.2.2.1.5.1.2
OBJECT IDENTIFIER    

sapBaseStatsExtnTable 1.3.6.1.4.1.6527.6.2.2.2.8.1.1
A table that contains ingress QoS SAP statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapBaseStatsExtnEntry

sapBaseStatsExtnEntry 1.3.6.1.4.1.6527.6.2.2.2.8.1.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SapBaseStatsExtnEntry  

sapBaseStatsQosClassifiersUsed 1.3.6.1.4.1.6527.6.2.2.2.8.1.1.1.1
This value indicates the number of ingress QoS classifiers used for this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sapBaseStatsQosMetersUsed 1.3.6.1.4.1.6527.6.2.2.2.8.1.1.1.2
This value indicates the number of ingress QoS meters used for this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sapBaseStatsIngressForwardedPackets 1.3.6.1.4.1.6527.6.2.2.2.8.1.1.1.3
The number of sap ingress forwarded packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsIngressForwardedOctets 1.3.6.1.4.1.6527.6.2.2.2.8.1.1.1.4
The number of sap ingress forwarded octets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsEgressForwardedPackets 1.3.6.1.4.1.6527.6.2.2.2.8.1.1.1.5
The number of sap egress forwarded packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsEgressForwardedOctets 1.3.6.1.4.1.6527.6.2.2.2.8.1.1.1.6
The number of sap egress forwarded octets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsIngressExtraTagDroppedPackets 1.3.6.1.4.1.6527.6.2.2.2.8.1.1.1.7
The number of Ingress Extra Tag Dropped packets
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsIngressExtraTagDroppedOctets 1.3.6.1.4.1.6527.6.2.2.2.8.1.1.1.8
The number of Ingress Extra Tag Dropped octets
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsIngressDroppedPackets 1.3.6.1.4.1.6527.6.2.2.2.8.1.1.1.9
The number of sap ingress dropped packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsIngressDroppedOctets 1.3.6.1.4.1.6527.6.2.2.2.8.1.1.1.10
The number of sap ingress dropped octets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseInfoExtnTable 1.3.6.1.4.1.6527.6.2.2.2.8.1.2
sapBaseInfoExtnTable is an extension of sapBaseInfoTable
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapBaseInfoExtnEntry

sapBaseInfoExtnEntry 1.3.6.1.4.1.6527.6.2.2.2.8.1.2.1
Information about a specific SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapBaseInfoExtnEntry  

sapBaseInfoEgressStatsPktsMode 1.3.6.1.4.1.6527.6.2.2.2.8.1.2.1.1
When set to 'true', egress sap stats is enabled to collect in packets
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

sapBaseInfoIngressCounterMode 1.3.6.1.4.1.6527.6.2.2.2.8.1.2.1.2
When set to 'packet', Ingress sap stats collects in packets and when set to 'ocetet', Ingress sap stats collects in octets
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER packet(1), octet(2)  

sapBaseInfoIngressAggregateMeterRate 1.3.6.1.4.1.6527.6.2.2.2.8.1.2.1.3
The rate to be used in kbps. The value -1 means maximum rate. sapBaseInfoIngressAggregateMeterRate can be set if 'tSapIngressMeterRateMode' is set to 'modified-trtcm'. When set to zero aggregate meter is disabled on sap Ingress
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER -1..20000000  

sapBaseInfoIngressAggregateMeterBurst 1.3.6.1.4.1.6527.6.2.2.2.8.1.2.1.4
The rate to be used in kbits. sapBaseInfoIngressAggregateMeterBurst can be set if 'tSapIngressMeterRateMode' is set to 'modified-trtcm'
Status: current Access: read-create
OBJECT-TYPE    
  TSapIngressAggrMeterBurstSize  

sapBaseInfoIngressWithAggregateMeter 1.3.6.1.4.1.6527.6.2.2.2.8.1.2.1.5
When set to 'true', ingress aggregate policer can be configured on this sap. sapBaseInfoIngressNeedAggregateMeter can be enabled only during sap creation
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

sapBaseInfoIngressExtraTagDropCount 1.3.6.1.4.1.6527.6.2.2.2.8.1.2.1.6
When set to 'true', couting of extra tag dropped packet will be enabled, It will be set only for required SAP's
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

sapBaseInfoEgressStatsEnable 1.3.6.1.4.1.6527.6.2.2.2.8.1.2.1.7
When set to 'true', egress sap stats is enabled
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

sapBaseInfoIngressStatsEnable 1.3.6.1.4.1.6527.6.2.2.2.8.1.2.1.8
When set to 'true', ingress sap stats is enabled
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

sapBaseInfoIngressCounterType 1.3.6.1.4.1.6527.6.2.2.2.8.1.2.1.9
When set to 'forward-drop-count', Ingress sap stats collects the forwarded and drop count, else in/out profile
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER in-out-profile-count(1), forward-drop-count(2)  

sapBaseInfoIngressFabricPath 1.3.6.1.4.1.6527.6.2.2.2.8.1.2.1.10
Ingress sap Fabric path
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..2  

sapBaseInfoEthRingShgEnable 1.3.6.1.4.1.6527.6.2.2.2.8.1.2.1.11
This command must only be used with the SAPs created in the service for the virtual channel on the interconnection nodes in a topology that uses multiple rings. This command creates a split-horizon group to ensure that Sub-Ring control messages from the major ring are only passed to the Sub-Ring control service.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

sapBaseInfoIngressAggShaperRateCIR 1.3.6.1.4.1.6527.6.2.2.2.8.1.2.1.12
Aggregate shaper rate CIR value
Status: current Access: read-create
OBJECT-TYPE    
  TSapIngressAggShaperRateCIRsize  

sapBaseInfoIngressAggShaperRatePIR 1.3.6.1.4.1.6527.6.2.2.2.8.1.2.1.13
Aggregate shaper rate PIR value
Status: current Access: read-create
OBJECT-TYPE    
  TSapIngressAggShaperRatePIRsize  

sapBaseInfoEgressAggShaperRateCIR 1.3.6.1.4.1.6527.6.2.2.2.8.1.2.1.14
Aggregate shaper rate CIR value
Status: current Access: read-create
OBJECT-TYPE    
  TSapAggShaperRateCIRsize  

sapBaseInfoEgressAggShaperRatePIR 1.3.6.1.4.1.6527.6.2.2.2.8.1.2.1.15
Aggregate shaper rate PIR value
Status: current Access: read-create
OBJECT-TYPE    
  TSapAggShaperRatePIRsize  

sapEgressAggRateLimitCIR 1.3.6.1.4.1.6527.6.2.2.2.8.1.2.1.16
The value of sapEgressAggRateLimitCIR in kbps is used to cap sap aggregate traffic cir rate.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..10000000  

sapEgressAggRateLimitPIR 1.3.6.1.4.1.6527.6.2.2.2.8.1.2.1.17
The value of tmnxPortEtherNwAggRateLimit in kbps is used to cap sap aggregate traffic pir rate.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1 | 1..10000000  

svcBaseInfoExtnTable 1.3.6.1.4.1.6527.6.2.2.2.8.2.1
svcBaseInfoExtnTable is an extension of svcBaseInfoTable
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SvcBaseInfoExtnEntry

svcBaseInfoExtnEntry 1.3.6.1.4.1.6527.6.2.2.2.8.2.1.1
Information about a specific service.
Status: current Access: not-accessible
OBJECT-TYPE    
  SvcBaseInfoExtnEntry  

svcMtuCheck 1.3.6.1.4.1.6527.6.2.2.2.8.2.1.1.1
This `no` form of this command disables the service MTU checks. When the check is disabled the system will pass on packets to the egress as long as the packet length is lesser than or equal to the configured port MTU. In other words, the length of the packet sent out of a SAP is limited by the access port MTU and the length of the packet sent out of a PW is limited by the network port MTU (minus the MPLS encapsulation). When set to 'false', the configured svcMtu value is not enforced
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

svcSapType 1.3.6.1.4.1.6527.6.2.2.2.8.2.1.1.2
The value of svcSapType specifies the type of saps configured in the service. If svcSapType is null-star the allowed access saps are null & star and Network sap is Q.*. If svcSapType is dot1q the allowed access saps is dot1q and Network sap are Q.*. If svcSapType is dot1q-preserve the allowed access saps is dot1q and Network sap is QinQ. If svcSapType is any the allowed access saps are null, dot1q, dot1q explicit null, star and Network sap is Q.*. If svcSapType is dot1q-range, the allowed saps are dot1q-range saps and Q.*
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER undefined(0), null-star(1), dot1q(2), dot1q-preserve(3), any(4), dot1q-range(5), qinq-inner-tag-preserve(6)  

svcUplinkType 1.3.6.1.4.1.6527.6.2.2.2.8.2.1.1.3
The value of svcUplinkType specifies the uplink type of the service. If uplink type is L2 the network SAPs can be Q.* and QinQ. If uplink type is MPLS the network SAPs can be spoke SDPs.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER undefined(0), l2(1), mpls(2)  

svcCustomerVid 1.3.6.1.4.1.6527.6.2.2.2.8.2.1.1.4
The value of svcCustomerVid specifies the encap value when svcSapType is dot1q-preserve. The sapEncapValue of Dot1q SAPs in the service should match this svcCustomerVid. The qtag2 of sapEncapValue of QinQ SAPs in the service should match this svcCustomerVid.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..4094  

svcEpipeType 1.3.6.1.4.1.6527.6.2.2.2.8.2.1.1.5
The value of this particular object indicates that a 'pbb-epipe' service is to be created
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(1), pbbepipe(2)  

svcAllowL2ptXstpBpdu 1.3.6.1.4.1.6527.6.2.2.2.8.2.1.1.6
The value of this particular object indicates that whether this service allows l2pt xstp bpdu
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER undefined(0), enable(1), disable(2)  

svcbVplsVid 1.3.6.1.4.1.6527.6.2.2.2.8.2.1.1.7
The value of svcbVplsVid specifies the b-vid for b-vpls and it is a mandatory parameter when creating a b-vpls service.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..4094  

sapEgrQosQueueStatsExtnTable 1.3.6.1.4.1.6527.6.2.2.2.8.1.3
A table that contains egress QoS queue SAP statistics. This table extends the capabilities of sapEgrQosQueueStatsTable
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapEgrQosQueueStatsExtnEntry

sapEgrQosQueueStatsExtnEntry 1.3.6.1.4.1.6527.6.2.2.2.8.1.3.1
Egress statistics about a specific SAP's QoS queue.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapEgrQosQueueStatsExtnEntry  

sapEgrQosQueueStatsFwdPkts 1.3.6.1.4.1.6527.6.2.2.2.8.1.3.1.1
The number of forwarded packets on this egress Queue.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrQosQueueStatsFwdOcts 1.3.6.1.4.1.6527.6.2.2.2.8.1.3.1.2
The number of forwarded bytes on this egress Queue.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrQosQueueStatsInprofDroPkts 1.3.6.1.4.1.6527.6.2.2.2.8.1.3.1.3
The number of dropped packets for this in profile egress Queue.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrQosQueueStatsInprofDroOcts 1.3.6.1.4.1.6527.6.2.2.2.8.1.3.1.4
The number of dropped bytes for this in profile egress Queue.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrQosQueueStatsOutprofDroPkts 1.3.6.1.4.1.6527.6.2.2.2.8.1.3.1.5
The number of dropped packets for this out profile egress Queue.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrQosQueueStatsOutprofDroOcts 1.3.6.1.4.1.6527.6.2.2.2.8.1.3.1.6
The number of dropped bytes for this out profile egress Queue.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosQueueStatsExtnTable 1.3.6.1.4.1.6527.6.2.2.2.8.1.4
A table that contains ingress QoS queue SAP statistics. This table extends the capabilities of sapIngQosQueueStatsTable
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapIngQosQueueStatsExtnEntry

sapIngQosQueueStatsExtnEntry 1.3.6.1.4.1.6527.6.2.2.2.8.1.4.1
Ingress statistics about a specific SAP's QoS queue.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapIngQosQueueStatsExtnEntry  

sapIngQosQueueStatsFwdPkts 1.3.6.1.4.1.6527.6.2.2.2.8.1.4.1.1
The number of forwarded packets on this ingress Queue.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosQueueStatsFwdOcts 1.3.6.1.4.1.6527.6.2.2.2.8.1.4.1.2
The number of forwarded bytes on this ingress Queue.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosQueueStatsInprofDroPkts 1.3.6.1.4.1.6527.6.2.2.2.8.1.4.1.3
The number of dropped packets for this in profile ingress Queue.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosQueueStatsInprofDroOcts 1.3.6.1.4.1.6527.6.2.2.2.8.1.4.1.4
The number of dropped bytes for this in profile ingress Queue.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosQueueStatsOutprofDroPkts 1.3.6.1.4.1.6527.6.2.2.2.8.1.4.1.5
The number of dropped packets for this out profile ingress Queue.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosQueueStatsOutprofDroOcts 1.3.6.1.4.1.6527.6.2.2.2.8.1.4.1.6
The number of dropped bytes for this out profile ingress Queue.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosMeterInfoTable 1.3.6.1.4.1.6527.6.2.2.2.8.1.5
This table is used to override the base parameters of a Meter, as defined in the associated SAP ingress QoS policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapIngQosMeterInfoEntry

sapIngQosMeterInfoEntry 1.3.6.1.4.1.6527.6.2.2.2.8.1.5.1
Override values for the specified SAP ingress QoS Meter. These values override the corresponding ones specified in the associated SAP ingress QoS policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapIngQosMeterInfoEntry  

sapIngQosMeterOvId 1.3.6.1.4.1.6527.6.2.2.2.8.1.5.1.1
The value of sapIngQosMeterOvId indicates the ID of the Meter whose parameters are to be overridden.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapIngressMeterId  

sapIngQosMeterRowStatus 1.3.6.1.4.1.6527.6.2.2.2.8.1.5.1.2
The value of sapIngQosMeterRowStatus controls the creation and deletion of rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

sapIngQosMeterLastMgmtChange 1.3.6.1.4.1.6527.6.2.2.2.8.1.5.1.3
The value of sapIngQosMeterLastMgmtChange indicates the value of sysUpTime at the time of the last management change of any writable object of this row.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapIngQosMeterOverrideFlags 1.3.6.1.4.1.6527.6.2.2.2.8.1.5.1.4
The value of sapIngQosMeterOverrideFlags specifies the set of attributes whose values have been overridden via management on this Meter. Clearing a given flag will return the corresponding overridden attribute to the value defined on the SAP's ingress QoS policy.
Status: current Access: read-create
OBJECT-TYPE    
  TQosMeterAttribute  

sapIngQosMeterAdminCBS 1.3.6.1.4.1.6527.6.2.2.2.8.1.5.1.5
The value of sapIngQosMeterCBS specifies the amount of reserved buffer space (in kilo bytes) for this queue.
Status: current Access: read-create
OBJECT-TYPE    
  TIngressBurstSize  

sapIngQosMeterAdminMBS 1.3.6.1.4.1.6527.6.2.2.2.8.1.5.1.6
The value of sapIngQosQMBS specifies the maximum amount of buffer space (in kilo bytes) allowed for this queue.
Status: current Access: read-create
OBJECT-TYPE    
  TIngressBurstSize  

sapIngQosMeterCIRAdaptation 1.3.6.1.4.1.6527.6.2.2.2.8.1.5.1.7
The value of sapIngQosMeterCIRAdaptation specifies the criteria to use to compute the operational CIR value for this Meter, while maintaining a minimum offset.
Status: current Access: read-create
OBJECT-TYPE    
  TAdaptationRule  

sapIngQosMeterPIRAdaptation 1.3.6.1.4.1.6527.6.2.2.2.8.1.5.1.8
The value of sapIngQosMeterPIRAdaptation specifies the criteria to use to compute the operational PIR value for this Meter, while maintaining a minimum offset.
Status: current Access: read-create
OBJECT-TYPE    
  TAdaptationRule  

sapIngQosMeterAdminPIR 1.3.6.1.4.1.6527.6.2.2.2.8.1.5.1.9
The value of sapIngQosMeterAdminPIR specifies the desired PIR value for this Meter.
Status: current Access: read-create
OBJECT-TYPE    
  TIngressPIRRate  

sapIngQosMeterAdminCIR 1.3.6.1.4.1.6527.6.2.2.2.8.1.5.1.10
The value of sapIngQosMeterAdminCIR specifies the desired CIR value for this queue.
Status: current Access: read-create
OBJECT-TYPE    
  TIngressCIRRate  

sapIngQosMeterRateMode 1.3.6.1.4.1.6527.6.2.2.2.8.1.5.1.11
Sap Ingress Meter Rate mode.The mode can be configured as Two Rate Three Color Marker (trTCM) or Single Rate Three Color Marker (srTCM). The mode command can be executed at anytime.
Status: current Access: read-create
OBJECT-TYPE    
  TMeterRateMode  

sapIngQosMeterOperPIR 1.3.6.1.4.1.6527.6.2.2.2.8.1.5.1.12
The value of sapIngQosMeterOperPIR returns the operational PIR value for this Meter.
Status: current Access: read-only
OBJECT-TYPE    
  TIngressPIRRate  

sapIngQosMeterOperCIR 1.3.6.1.4.1.6527.6.2.2.2.8.1.5.1.13
The value of sapIngQosMeterOperCIR returns the operational CIR value for this queue.
Status: current Access: read-only
OBJECT-TYPE    
  TIngressCIRRate  

sapIngQosMeterRateColorMode 1.3.6.1.4.1.6527.6.2.2.2.8.1.5.1.14
Set sap meter color mode
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER color-aware(1), color-blind(2)  

sapIngQosQueueInfoExtnTable 1.3.6.1.4.1.6527.6.2.2.2.8.1.6
This table is used to override the base parameters of a queue, as defined in the associated SAP ingress QoS policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapIngQosQueueInfoExtnEntry

sapIngQosQueueInfoExtnEntry 1.3.6.1.4.1.6527.6.2.2.2.8.1.6.1
Override values for the specified SAP ingress QoS queue. These values override the corresponding ones specified in the associated SAP ingress QoS policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapIngQosQueueInfoExtnEntry  

sapIngQosQPolicyName 1.3.6.1.4.1.6527.6.2.2.2.8.1.6.1.1
sapIngQosQPolicyName determines the queue management policy attached to this SAP Ingress queue.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItem  

sapIngQosQPIRWeight 1.3.6.1.4.1.6527.6.2.2.2.8.1.6.1.2
The weight that needs to be used by the scheduler to which this override queue would be feeding to.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

sapIngQosQCIRLevel 1.3.6.1.4.1.6527.6.2.2.2.8.1.6.1.3
This specifies the level of priority while feeding to the parent. The level '0' means treat all offered load for this override queue as for the above CIR traffic.
Status: current Access: read-create
OBJECT-TYPE    
  TLevelOrDefault  

svcVplsId 1.3.6.1.4.1.6527.6.2.2.2.8.4.1
The value of the object svcVplsId is the vpls service id bound to IES interface after ip interface binding is enabled on IES IP interface.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  TmnxServId  

svcIesId 1.3.6.1.4.1.6527.6.2.2.2.8.4.2
The value of the object svcIesId is the ies service id to which vpls service is bound after ip interface binding is enabled on a IES IP interface.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  TmnxServId  

svcVplssvcBoundToIESSvc 1.3.6.1.4.1.6527.6.2.2.2.8.3.1
The svcVplssvcBoundToIESSvc notification is generated when vpls service is bound to IES interface. The ip interface binding must be enabled before the IES IP interface is bound to the VPLS service
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxSASSvcNotifyGroup 1.3.6.1.4.1.6527.6.2.2.1.5.2.1
The group of notifications for the services feature on Alcatel-Lucent 7210 series systems.
Status: current Access: accessible-for-notify
NOTIFICATION-GROUP    

tmnxSapGlobalV1v0Group 1.3.6.1.4.1.6527.6.2.2.1.5.1.2.28
The group of objects supporting management of Services SAP general capabilities on Alcatel 7210 series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxSasSapQosV2v0Group 1.3.6.1.4.1.6527.6.2.2.1.5.1.2.29
The group of objects supporting the management of Qos capabilities on Alcatel 7210 series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxSapGlobalV3v0Group 1.3.6.1.4.1.6527.6.2.2.1.5.1.2.30
The group of objects supporting management of Services SAP general capabilities on Alcatel 7210 series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxSapGlobalV4v0Group 1.3.6.1.4.1.6527.6.2.2.1.5.1.2.31
The group of objects supporting management of Services SAP general capabilities on Alcatel 7210 series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxSapGlobalV5v0Group 1.3.6.1.4.1.6527.6.2.2.1.5.1.2.32
The group of objects supporting management of Services SAP general capabilities on Alcatel 7210 series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxSap72100V1v0Compliance 1.3.6.1.4.1.6527.6.2.2.1.5.1.1.1
The compliance statement for management of services SAPs on Alcatel 7210 SAS series systems.
Status: current Access: accessible-for-notify
MODULE-COMPLIANCE    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor