TIMETRA-QOS-MIB

File: TIMETRA-QOS-MIB.mib (618378 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
ATM-TC-MIB INET-ADDRESS-MIB TIMETRA-GLOBAL-MIB
TIMETRA-PORT-MIB TIMETRA-TC-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Unsigned32
IpAddress Integer32 MODULE-COMPLIANCE
OBJECT-GROUP RowStatus MacAddress
TruthValue StorageType TimeStamp
TEXTUAL-CONVENTION AtmServiceCategory AtmTrafficDescrParamIndex
AtmVcIdentifier InetAddress InetAddressType
InetAddressIPv6 InetAddressPrefixLength timetraSRMIBModules
tmnxSRObjs tmnxSRNotifyPrefix tmnxSRConfs
TmnxMcMlpppClassIndex Dot1PPriority IpAddressPrefixLength
ServiceAccessPoint TItemDescription TNamedItem
TNamedItemOrEmpty TLNamedItemOrEmpty TDSCPValue
TDSCPName TDSCPNameOrEmpty TIpProtocol
TTcpUdpPort TTcpUdpPortOperator TFrameType
TFCName TLspExpValue TQueueId
TIngressQueueId TEgressQueueId TIngressHsmdaQueueId
TEgressHsmdaQueueId TPortSchedulerPIR TPortSchedulerCIR
THsmdaSchedulerPolicyGroupId TWeight TCIRRate
TPIRRate THsmdaWeight THsmdaWeightClass
THsmdaWrrWeight THPolPIRRate THPolCIRRate
TNonZeroWeight TmnxEnabledDisabled TSapIngressPolicyID
TSapEgressPolicyID TIngressHsmdaPerPacketOffset TEgressHsmdaPerPacketOffset
THsmdaPIRKRate THsmdaCIRKRate THsmdaPIRMRate
TIngressHsmdaCounterIdOrZero TEgressHsmdaCounterIdOrZero TMlpppQoSProfileId
TFCNameOrEmpty TMcFrQoSProfileId TNetworkPolicyID
TItemScope TItemMatch TPriority
TPriorityOrDefault TProfile TProfileOrDei
TDEProfile TDEProfileOrDei TProfileOrNone
TAdaptationRule TRemarkType TPrecValue
TPrecValueOrNone TBurstSize TBurstPercent
TBurstHundredthsOfPercent TBurstPercentOrDefault TRatePercent
TPIRRatePercent TLevel TLevelOrDefault
TQueueMode TEntryId TMatchCriteria
TAtmTdpDescrType TDEValue TPolicerWeight
TIngPolicerId TEgrPolicerId TEgrPolicerIdOrNone
TIngPolicerIdOrNone TRateType TPerPacketOffset
TBurstSizeBytes TPlcrBurstSizeBytes TmnxIngPolicerStatMode
TBurstLimit TClassBurstLimit TmnxEgrPolicerStatMode
QTagFullRange QTagFullRangeOrNone TMacFilterType
TBWRateType TEgressQPerPacketOffset TPolicerRateType
THsmdaPolicyIncludeQueues THsmdaPolicyScheduleClass THSMDABurstSizeBytes
THSMDAQueueBurstLimit TProfileUseDEOrNone TmnxSlopeMap
TAdvCfgRate TMaxDecRate TPortSchedulerPIRRate
THPolVirtualSchePIRRate THPolVirtualScheCIRRate

Defined Types

TmnxMcFrClassIndex  
The TmnxMcFrClassIndex indicates the class of a Multiclass Fr bundle. For example, a 4-class Fr link has 4 classes with indices 0, 1, 2, and 3.
TEXTUAL-CONVENTION    
  INTEGER 0..15  

TDSCPNameEntry  
SEQUENCE    
  tDSCPName TDSCPName
  tDSCPNameRowStatus RowStatus
  tDSCPNameStorageType StorageType
  tDSCPNameDscpValue TDSCPValue
  tDSCPNameLastChanged TimeStamp

TFCNameEntry  
SEQUENCE    
  tFCName TFCName
  tFCRowStatus RowStatus
  tFCStorageType StorageType
  tFCValue Integer32
  tFCNameLastChanged TimeStamp

TSapIngressEntry  
SEQUENCE    
  tSapIngressIndex TSapIngressPolicyID
  tSapIngressRowStatus RowStatus
  tSapIngressScope TItemScope
  tSapIngressDescription TItemDescription
  tSapIngressDefaultFC TNamedItem
  tSapIngressDefaultFCPriority TPriority
  tSapIngressMatchCriteria TMatchCriteria
  tSapIngressLastChanged TimeStamp
  tSapIngressHsmdaPacketOffset TIngressHsmdaPerPacketOffset
  tSapIngressDefFCHsmdaCntrOvr TIngressHsmdaCounterIdOrZero
  tSapIngressMacCritType TMacFilterType
  tSapIngressPolicyName TLNamedItemOrEmpty

TSapIngressQueueEntry  
SEQUENCE    
  tSapIngressQueue TIngressQueueId
  tSapIngressQueueRowStatus RowStatus
  tSapIngressQueueParent TNamedItemOrEmpty
  tSapIngressQueueLevel TLevel
  tSapIngressQueueWeight TWeight
  tSapIngressQueueCIRLevel TLevelOrDefault
  tSapIngressQueueCIRWeight TWeight
  tSapIngressQueueMCast TruthValue
  tSapIngressQueueExpedite INTEGER
  tSapIngressQueueCBS TBurstSize
  tSapIngressQueueMBS TBurstSize
  tSapIngressQueueHiPrioOnly TBurstPercentOrDefault
  tSapIngressQueuePIRAdaptation TAdaptationRule
  tSapIngressQueueCIRAdaptation TAdaptationRule
  tSapIngressQueueAdminPIR TPIRRate
  tSapIngressQueueAdminCIR TCIRRate
  tSapIngressQueueOperPIR TPIRRate
  tSapIngressQueueOperCIR TCIRRate
  tSapIngressQueueLastChanged TimeStamp
  tSapIngressQueuePoliced TruthValue
  tSapIngressQueueMode TQueueMode
  tSapIngressQueuePoolName TNamedItemOrEmpty
  tSapIngressQueueMBSBytes TBurstSizeBytes
  tSapIngressQueueBurstLimit TBurstLimit
  tSapIngressQueueAdminPIRPercent Unsigned32
  tSapIngressQueueAdminCIRPercent Unsigned32
  tSapIngressQueueRateType TBWRateType
  tSapIngressQueueAdvCfgPolicy TNamedItemOrEmpty

TSapIngressDSCPEntry  
SEQUENCE    
  tSapIngressDSCP TDSCPName
  tSapIngressDSCPRowStatus RowStatus
  tSapIngressDSCPFC TNamedItemOrEmpty
  tSapIngressDSCPPriority TPriorityOrDefault
  tSapIngressDSCPLastChanged TimeStamp
  tSapIngressDSCPHsmdaCntrOvr TIngressHsmdaCounterIdOrZero

TSapIngressDot1pEntry  
SEQUENCE    
  tSapIngressDot1pValue Dot1PPriority
  tSapIngressDot1pRowStatus RowStatus
  tSapIngressDot1pFC TNamedItemOrEmpty
  tSapIngressDot1pPriority TPriorityOrDefault
  tSapIngressDot1pLastChanged TimeStamp
  tSapIngressDot1pHsmdaCntrOvr TIngressHsmdaCounterIdOrZero

TSapIngressIPCriteriaEntry  
SEQUENCE    
  tSapIngressIPCriteriaIndex TEntryId
  tSapIngressIPCriteriaRowStatus RowStatus
  tSapIngressIPCriteriaDescription TItemDescription
  tSapIngressIPCriteriaActionFC TNamedItemOrEmpty
  tSapIngressIPCriteriaActionPriority TPriorityOrDefault
  tSapIngressIPCriteriaSourceIpAddr IpAddress
  tSapIngressIPCriteriaSourceIpMask IpAddressPrefixLength
  tSapIngressIPCriteriaDestIpAddr IpAddress
  tSapIngressIPCriteriaDestIpMask IpAddressPrefixLength
  tSapIngressIPCriteriaProtocol TIpProtocol
  tSapIngressIPCriteriaSourcePortValue1 TTcpUdpPort
  tSapIngressIPCriteriaSourcePortValue2 TTcpUdpPort
  tSapIngressIPCriteriaSourcePortOperator TTcpUdpPortOperator
  tSapIngressIPCriteriaDestPortValue1 TTcpUdpPort
  tSapIngressIPCriteriaDestPortValue2 TTcpUdpPort
  tSapIngressIPCriteriaDestPortOperator TTcpUdpPortOperator
  tSapIngressIPCriteriaDSCP TDSCPNameOrEmpty
  tSapIngressIPCriteriaFragment TItemMatch
  tSapIngressIPCriteriaLastChanged TimeStamp
  tSapIngressIPCritHsmdaCntrOvr TIngressHsmdaCounterIdOrZero
  tSapIngressIPCriteriaIpPrecValue Dot1PPriority
  tSapIngressIPCriteriaIpPrecMask Dot1PPriority

TSapIngressMacCriteriaEntry  
SEQUENCE    
  tSapIngressMacCriteriaIndex TEntryId
  tSapIngressMacCriteriaRowStatus RowStatus
  tSapIngressMacCriteriaDescription TItemDescription
  tSapIngressMacCriteriaActionFC TNamedItemOrEmpty
  tSapIngressMacCriteriaActionPriority TPriorityOrDefault
  tSapIngressMacCriteriaFrameType TFrameType
  tSapIngressMacCriteriaSrcMacAddr MacAddress
  tSapIngressMacCriteriaSrcMacMask MacAddress
  tSapIngressMacCriteriaDstMacAddr MacAddress
  tSapIngressMacCriteriaDstMacMask MacAddress
  tSapIngressMacCriteriaDot1PValue Dot1PPriority
  tSapIngressMacCriteriaDot1PMask Dot1PPriority
  tSapIngressMacCriteriaEthernetType Integer32
  tSapIngressMacCriteriaDSAP ServiceAccessPoint
  tSapIngressMacCriteriaDSAPMask ServiceAccessPoint
  tSapIngressMacCriteriaSSAP ServiceAccessPoint
  tSapIngressMacCriteriaSSAPMask ServiceAccessPoint
  tSapIngressMacCriteriaSnapPid Integer32
  tSapIngressMacCriteriaSnapOui INTEGER
  tSapIngressMacCriteriaLastChanged TimeStamp
  tSapIngressMacCriteriaAtmVci AtmVcIdentifier
  tSapIngressMacCritInnerTagValue QTagFullRangeOrNone
  tSapIngressMacCritInnerTagMask QTagFullRange
  tSapIngressMacCritOuterTagValue QTagFullRangeOrNone
  tSapIngressMacCritOuterTagMask QTagFullRange

TSapIngressFCEntry  
SEQUENCE    
  tSapIngressFCName TNamedItem
  tSapIngressFCRowStatus RowStatus
  tSapIngressFCQueue TIngressQueueId
  tSapIngressFCMCastQueue TIngressQueueId
  tSapIngressFCBCastQueue TIngressQueueId
  tSapIngressFCUnknownQueue TIngressQueueId
  tSapIngressFCLastChanged TimeStamp
  tSapIngressFCInProfRemark TRemarkType
  tSapIngressFCInProfDscp TNamedItemOrEmpty
  tSapIngressFCInProfPrec TPrecValueOrNone
  tSapIngressFCOutProfRemark TRemarkType
  tSapIngressFCOutProfDscp TNamedItemOrEmpty
  tSapIngressFCOutProfPrec TPrecValueOrNone
  tSapIngressFCProfile TProfileOrNone
  tSapIngressFCHsmdaQueue TIngressHsmdaQueueId
  tSapIngressFCHsmdaMCastQueue TIngressHsmdaQueueId
  tSapIngressFCHsmdaBCastQueue TIngressHsmdaQueueId
  tSapIngressFCDE1OutOfProfile TruthValue
  tSapIngressFCQGrp TNamedItemOrEmpty
  tSapIngressFCQGrpMCast TNamedItemOrEmpty
  tSapIngressFCQGrpBCast TNamedItemOrEmpty
  tSapIngressFCQGrpUnknown TNamedItemOrEmpty
  tSapIngressFCPolicer TIngPolicerIdOrNone
  tSapIngressFCMCastPolicer TIngPolicerIdOrNone
  tSapIngressFCBCastPolicer TIngPolicerIdOrNone
  tSapIngressFCUnknownPolicer TIngPolicerIdOrNone
  tSapIngressFCPlcrFPQGrp TruthValue
  tSapIngressFCMCastPlcrFPQGrp TruthValue
  tSapIngressFCBCastPlcrFPQGrp TruthValue
  tSapIngressFCUnknownPlcrFPQGrp TruthValue

TSapIngressPrecEntry  
SEQUENCE    
  tSapIngressPrecValue TPrecValue
  tSapIngressPrecRowStatus RowStatus
  tSapIngressPrecFC TNamedItemOrEmpty
  tSapIngressPrecFCPriority TPriorityOrDefault
  tSapIngressPrecLastChanged TimeStamp
  tSapIngressPrecHsmdaCntrOvr TIngressHsmdaCounterIdOrZero

TSapIngressIPv6CriteriaEntry  
SEQUENCE    
  tSapIngressIPv6CriteriaIndex TEntryId
  tSapIngressIPv6CriteriaRowStatus RowStatus
  tSapIngressIPv6CriteriaDescription TItemDescription
  tSapIngressIPv6CriteriaActionFC TNamedItemOrEmpty
  tSapIngressIPv6CriteriaActionPriority TPriorityOrDefault
  tSapIngressIPv6CriteriaSourceIpAddr InetAddressIPv6
  tSapIngressIPv6CriteriaSourceIpMask InetAddressPrefixLength
  tSapIngressIPv6CriteriaDestIpAddr InetAddressIPv6
  tSapIngressIPv6CriteriaDestIpMask InetAddressPrefixLength
  tSapIngressIPv6CriteriaNextHeader TIpProtocol
  tSapIngressIPv6CriteriaSourcePortValue1 TTcpUdpPort
  tSapIngressIPv6CriteriaSourcePortValue2 TTcpUdpPort
  tSapIngressIPv6CriteriaSourcePortOperator TTcpUdpPortOperator
  tSapIngressIPv6CriteriaDestPortValue1 TTcpUdpPort
  tSapIngressIPv6CriteriaDestPortValue2 TTcpUdpPort
  tSapIngressIPv6CriteriaDestPortOperator TTcpUdpPortOperator
  tSapIngressIPv6CriteriaDSCP TDSCPNameOrEmpty
  tSapIngressIPv6CriteriaLastChanged TimeStamp
  tSapIngressIPv6CriteriaIpPrecValue Dot1PPriority
  tSapIngressIPv6CriteriaIpPrecMask Dot1PPriority

TSapIngressHsmdaQueueEntry  
SEQUENCE    
  tSapIngressHsmdaQueue TIngressHsmdaQueueId
  tSapIngressHsmdaQueueRowStatus RowStatus
  tSapIngressHsmdaQueueLastChanged TimeStamp
  tSapIngressHsmdaQueueCIRAdaptn TAdaptationRule
  tSapIngressHsmdaQueuePIRAdaptn TAdaptationRule
  tSapIngressHsmdaQueueAdminPIR THsmdaPIRKRate
  tSapIngressHsmdaQueueAdminCIR THsmdaCIRKRate
  tSapIngressHsmdaQueueSlopePolicy TNamedItem
  tSapIngressHsmdaQueuePoliced TruthValue

TSapIngressLspExpEntry  
SEQUENCE    
  tSapIngressLspExpValue TLspExpValue
  tSapIngressLspExpRowStatus RowStatus
  tSapIngressLspExpLastChanged TimeStamp
  tSapIngressLspExpFC TNamedItemOrEmpty
  tSapIngressLspExpFCPriority TPriorityOrDefault
  tSapIngressLspExpHsmdaCntrOvr TIngressHsmdaCounterIdOrZero

TSapIngPolicerEntry  
SEQUENCE    
  tSapIngPolicerId TIngPolicerId
  tSapIngPolicerRowStatus RowStatus
  tSapIngPolicerLastChanged TimeStamp
  tSapIngPolicerDescr TItemDescription
  tSapIngPolicerPIRAdaptation TAdaptationRule
  tSapIngPolicerCIRAdaptation TAdaptationRule
  tSapIngPolicerParent TNamedItemOrEmpty
  tSapIngPolicerLevel TLevel
  tSapIngPolicerWeight TPolicerWeight
  tSapIngPolicerAdminPIR THPolPIRRate
  tSapIngPolicerAdminCIR THPolCIRRate
  tSapIngPolicerStatMode TmnxIngPolicerStatMode
  tSapIngPolicerMBS TPlcrBurstSizeBytes
  tSapIngPolicerHiPrioOnly TBurstPercentOrDefault
  tSapIngPolicerCBS TPlcrBurstSizeBytes
  tSapIngPolicerPktOffset TPerPacketOffset
  tSapIngPolicerAdminPIRPercent Unsigned32
  tSapIngPolicerAdminCIRPercent Unsigned32
  tSapIngPolicerRateType TPolicerRateType
  tSapIngPolicerSlopeStartDepth Unsigned32
  tSapIngPolicerSlopeMaxDepth Unsigned32
  tSapIngPolicerSlopeMaxProb Unsigned32
  tSapIngPolicerSlopeMap TmnxSlopeMap
  tSapIngPolicerAdvCfgPolicy TNamedItemOrEmpty
  tSapIngPolicerProfileCapped TruthValue

TSapIngPolicyNameEntry  
SEQUENCE    
  tSapIngPolicyNameId TSapIngressPolicyID
  tSapIngPolicyNameRowStatus RowStatus
  tSapIngPolicyNameLastChanged TimeStamp

TSapEgressEntry  
SEQUENCE    
  tSapEgressIndex TSapEgressPolicyID
  tSapEgressRowStatus RowStatus
  tSapEgressScope TItemScope
  tSapEgressDescription TItemDescription
  tSapEgressLastChanged TimeStamp
  tSapEgressHsmdaPacketOffset TEgressHsmdaPerPacketOffset
  tSapEgressMatchCriteria TMatchCriteria
  tSapEgressHsmdaWrrPolicy TNamedItemOrEmpty
  tSapEgressHsmdaLowBrstMaxCls Unsigned32
  tSapEgressPolicyName TLNamedItemOrEmpty
  tSapEgressEthernetCtag TruthValue

TSapEgressQueueEntry  
SEQUENCE    
  tSapEgressQueueIndex TEgressQueueId
  tSapEgressQueueRowStatus RowStatus
  tSapEgressQueueParent TNamedItemOrEmpty
  tSapEgressQueueLevel TLevel
  tSapEgressQueueWeight TWeight
  tSapEgressQueueCIRLevel TLevelOrDefault
  tSapEgressQueueCIRWeight TWeight
  tSapEgressQueueExpedite INTEGER
  tSapEgressQueueCBS TBurstSize
  tSapEgressQueueMBS TBurstSize
  tSapEgressQueueHiPrioOnly TBurstPercentOrDefault
  tSapEgressQueuePIRAdaptation TAdaptationRule
  tSapEgressQueueCIRAdaptation TAdaptationRule
  tSapEgressQueueAdminPIR TPIRRate
  tSapEgressQueueAdminCIR TCIRRate
  tSapEgressQueueOperPIR TPIRRate
  tSapEgressQueueOperCIR TCIRRate
  tSapEgressQueueLastChanged TimeStamp
  tSapEgressQueueUsePortParent TruthValue
  tSapEgressQueuePortLvl TLevel
  tSapEgressQueuePortWght TWeight
  tSapEgressQueuePortCIRLvl TLevelOrDefault
  tSapEgressQueuePortCIRWght TWeight
  tSapEgressQueuePortAvgOverhead Unsigned32
  tSapEgressQueuePoolName TNamedItemOrEmpty
  tSapEgressQueueXPWredQ TruthValue
  tSapEgressQueueXPWredQSlope TNamedItem
  tSapEgressQueueMBSBytes TBurstSizeBytes
  tSapEgressQueueBurstLimit TBurstLimit
  tSapEgressQueuePktOffset TEgressQPerPacketOffset
  tSapEgressQueueAdminPIRPercent Unsigned32
  tSapEgressQueueAdminCIRPercent Unsigned32
  tSapEgressQueueRateType TBWRateType
  tSapEgressQueueAdvCfgPolicy TNamedItemOrEmpty

TSapEgressFCEntry  
SEQUENCE    
  tSapEgressFCName TFCName
  tSapEgressFCRowStatus RowStatus
  tSapEgressFCQueue TEgressQueueId
  tSapEgressFCDot1PValue Dot1PPriority
  tSapEgressFCLastChanged TimeStamp
  tSapEgressFCHsmdaQueue TEgressHsmdaQueueId
  tSapEgressFCDot1PHsmdaProfile TruthValue
  tSapEgressFCDot1PInProfile Dot1PPriority
  tSapEgressFCDot1POutProfile Dot1PPriority
  tSapEgressFCForceDEValue TDEValue
  tSapEgressFCDEMark TruthValue
  tSapEgressFCInProfDscp TNamedItemOrEmpty
  tSapEgressFCOutProfDscp TNamedItemOrEmpty
  tSapEgressFCInProfPrec TPrecValueOrNone
  tSapEgressFCOutProfPrec TPrecValueOrNone
  tSapEgressFCQGrp TNamedItemOrEmpty
  tSapEgressFCPolicer TEgrPolicerIdOrNone
  tSapEgressFCQGrpFC TFCNameOrEmpty

TSapEgressHsmdaQueueEntry  
SEQUENCE    
  tSapEgressHsmdaQueue TEgressHsmdaQueueId
  tSapEgressHsmdaQueueRowStatus RowStatus
  tSapEgressHsmdaQueueCIRAdaptn TAdaptationRule
  tSapEgressHsmdaQueuePIRAdaptn TAdaptationRule
  tSapEgressHsmdaQueueAdminPIR THsmdaPIRKRate
  tSapEgressHsmdaQueueAdminCIR THsmdaCIRKRate
  tSapEgressHsmdaQueueSlopePolicy TNamedItem
  tSapEgressHsmdaQueueLastChanged TimeStamp
  tSapEgressHsmdaQueueWrrWeight THsmdaWrrWeight
  tSapEgressHsmdaQueueMBS THSMDABurstSizeBytes
  tSapEgressHsmdaQueueBurstLimit THSMDAQueueBurstLimit

TSapEgressDSCPEntry  
SEQUENCE    
  tSapEgressDSCP TDSCPName
  tSapEgressDSCPRowStatus RowStatus
  tSapEgressDSCPLastChanged TimeStamp
  tSapEgressDSCPHsmdaCntrOverride TEgressHsmdaCounterIdOrZero
  tSapEgressDSCPfc TFCNameOrEmpty
  tSapEgressDSCPprofile TProfileOrNone

TSapEgressPrecEntry  
SEQUENCE    
  tSapEgressPrecValue TPrecValue
  tSapEgressPrecRowStatus RowStatus
  tSapEgressPrecLastChanged TimeStamp
  tSapEgressPrecHsmdaCntrOverride TEgressHsmdaCounterIdOrZero
  tSapEgressPrecFC TFCNameOrEmpty
  tSapEgressPrecProfile TProfileOrNone

TSapEgrIPCritEntry  
SEQUENCE    
  tSapEgrIPCritAddrType InetAddressType
  tSapEgrIPCritIndex Unsigned32
  tSapEgrIPCritRowStatus RowStatus
  tSapEgrIPCritLastChanged TimeStamp
  tSapEgrIPCritDescription TItemDescription
  tSapEgrIPCritActionHsmdaCntrOvr TEgressHsmdaCounterIdOrZero
  tSapEgrIPCritSourceIpAddrType InetAddressType
  tSapEgrIPCritSourceIpAddr InetAddress
  tSapEgrIPCritSourceIpMask InetAddressPrefixLength
  tSapEgrIPCritDestIpAddrType InetAddressType
  tSapEgrIPCritDestIpAddr InetAddress
  tSapEgrIPCritDestIpMask InetAddressPrefixLength
  tSapEgrIPCritProtocol TIpProtocol
  tSapEgrIPCritSourcePortValue1 TTcpUdpPort
  tSapEgrIPCritSourcePortValue2 TTcpUdpPort
  tSapEgrIPCritSourcePortOperator TTcpUdpPortOperator
  tSapEgrIPCritDestPortValue1 TTcpUdpPort
  tSapEgrIPCritDestPortValue2 TTcpUdpPort
  tSapEgrIPCritDestPortOperator TTcpUdpPortOperator
  tSapEgrIPCritDSCP TDSCPNameOrEmpty
  tSapEgrIPCritFragment TItemMatch
  tSapEgrIPCritActionFC TFCNameOrEmpty
  tSapEgrIPCritActionProfile TProfileOrNone

TSapEgrPolicerEntry  
SEQUENCE    
  tSapEgrPolicerId TEgrPolicerId
  tSapEgrPolicerRowStatus RowStatus
  tSapEgrPolicerLastChanged TimeStamp
  tSapEgrPolicerDescr TItemDescription
  tSapEgrPolicerPIRAdaptation TAdaptationRule
  tSapEgrPolicerCIRAdaptation TAdaptationRule
  tSapEgrPolicerParent TNamedItemOrEmpty
  tSapEgrPolicerLevel TLevel
  tSapEgrPolicerWeight TPolicerWeight
  tSapEgrPolicerAdminPIR THPolPIRRate
  tSapEgrPolicerAdminCIR THPolCIRRate
  tSapEgrPolicerStatMode TmnxEgrPolicerStatMode
  tSapEgrPolicerMBS TPlcrBurstSizeBytes
  tSapEgrPolicerHiPrioOnly TBurstPercentOrDefault
  tSapEgrPolicerCBS TPlcrBurstSizeBytes
  tSapEgrPolicerPktOffset TPerPacketOffset
  tSapEgrPolicerAdminPIRPercent Unsigned32
  tSapEgrPolicerAdminCIRPercent Unsigned32
  tSapEgrPolicerRateType TPolicerRateType
  tSapEgrPolicerSlopeStartDepth Unsigned32
  tSapEgrPolicerSlopeMaxDepth Unsigned32
  tSapEgrPolicerSlopeMaxProb Unsigned32
  tSapEgrPolicerSlopeMap TmnxSlopeMap
  tSapEgrPolicerAdvCfgPolicy TNamedItemOrEmpty
  tSapEgrPolicerProfileCapped TruthValue

TSapEgrPolicyNameEntry  
SEQUENCE    
  tSapEgrPolicyNameId TSapEgressPolicyID
  tSapEgrPolicyNameRowStatus RowStatus
  tSapEgrPolicyNameLastChanged TimeStamp

TSapEgressDot1pEntry  
SEQUENCE    
  tSapEgressDot1pValue Dot1PPriority
  tSapEgressDot1pRowStatus RowStatus
  tSapEgressDot1pLastChanged TimeStamp
  tSapEgressDot1pFC TNamedItemOrEmpty
  tSapEgressDot1pProfile TProfileUseDEOrNone

TNetworkPolicyEntry  
SEQUENCE    
  tNetworkPolicyIndex TNetworkPolicyID
  tNetworkPolicyRowStatus RowStatus
  tNetworkPolicyScope TItemScope
  tNetworkPolicyDescription TItemDescription
  tNetworkPolicyIngressDefaultActionFC TFCName
  tNetworkPolicyIngressDefaultActionProfile TProfileOrDei
  tNetworkPolicyEgressRemark TruthValue
  tNetworkPolicyLastChanged TimeStamp
  tNetworkPolicyIngressLerUseDscp TruthValue
  tNetworkPolicyEgressRemarkDscp TruthValue

TNetworkIngressDSCPEntry  
SEQUENCE    
  tNetworkIngressDSCP TDSCPName
  tNetworkIngressDSCPRowStatus RowStatus
  tNetworkIngressDSCPFC TFCName
  tNetworkIngressDSCPProfile TProfile
  tNetworkIngressDSCPLastChanged TimeStamp

TNetworkIngressDot1pEntry  
SEQUENCE    
  tNetworkIngressDot1pValue Dot1PPriority
  tNetworkIngressDot1pRowStatus RowStatus
  tNetworkIngressDot1pFC TFCName
  tNetworkIngressDot1pProfile TDEProfileOrDei
  tNetworkIngressDot1pLastChanged TimeStamp

TNetworkIngressLSPEXPEntry  
SEQUENCE    
  tNetworkIngressLSPEXP TLspExpValue
  tNetworkIngressLSPEXPRowStatus RowStatus
  tNetworkIngressLSPEXPFC TFCName
  tNetworkIngressLSPEXPProfile TProfile
  tNetworkIngressLSPEXPLastChanged TimeStamp

TNetworkEgressFCEntry  
SEQUENCE    
  tNetworkEgressFCName TFCName
  tNetworkEgressFCDSCPInProfile TDSCPNameOrEmpty
  tNetworkEgressFCDSCPOutProfile TDSCPNameOrEmpty
  tNetworkEgressFCLspExpInProfile TLspExpValue
  tNetworkEgressFCLspExpOutProfile TLspExpValue
  tNetworkEgressFCDot1pInProfile Dot1PPriority
  tNetworkEgressFCDot1pOutProfile Dot1PPriority
  tNetworkEgressFCLastChanged TimeStamp
  tNetworkEgressFCForceDEValue TDEValue
  tNetworkEgressFCDEMark TruthValue
  tNetworkEgressFCQGrpQueue TEgressQueueId
  tNetworkEgressFCQGrpPolicer TEgrPolicerIdOrNone

TNetworkQueuePolicyEntry  
SEQUENCE    
  tNetworkQueuePolicy TNamedItem
  tNetworkQueuePolicyRowStatus RowStatus
  tNetworkQueuePolicyDescription TItemDescription
  tNetworkQueuePolicyLastChanged TimeStamp
  tNetworkQueuePolicyEHWrrPlcy TNamedItemOrEmpty
  tNetworkQueuePolicyEHPktBOffst TPerPacketOffset

TNetworkQueueEntry  
SEQUENCE    
  tNetworkQueue TQueueId
  tNetworkQueueRowStatus RowStatus
  tNetworkQueuePoolName TNamedItemOrEmpty
  tNetworkQueueParent TNamedItemOrEmpty
  tNetworkQueueLevel TLevel
  tNetworkQueueWeight TWeight
  tNetworkQueueCIRLevel TLevelOrDefault
  tNetworkQueueCIRWeight TWeight
  tNetworkQueueMCast TruthValue
  tNetworkQueueExpedite INTEGER
  tNetworkQueueCIR TRatePercent
  tNetworkQueuePIR TPIRRatePercent
  tNetworkQueueCBS TBurstHundredthsOfPercent
  tNetworkQueueMBS TBurstHundredthsOfPercent
  tNetworkQueueHiPrioOnly TBurstPercentOrDefault
  tNetworkQueueLastChanged TimeStamp
  tNetworkQueueUsePortParent TruthValue
  tNetworkQueuePortLvl TLevel
  tNetworkQueuePortWght TWeight
  tNetworkQueuePortCIRLvl TLevelOrDefault
  tNetworkQueuePortCIRWght TWeight
  tNetworkQueuePortAvgOverhead Unsigned32
  tNetworkQueueCIRAdaptation TAdaptationRule
  tNetworkQueuePIRAdaptation TAdaptationRule

TNetworkQueueFCEntry  
SEQUENCE    
  tNetworkQueueFCName TFCName
  tNetworkQueueFCRowStatus RowStatus
  tNetworkQueueFC TQueueId
  tNetworkQueueFCMCast TQueueId
  tNetworkQueueFCLastChanged TimeStamp
  tNetworkQueueFCEgrHsmdaQueue TQueueId

TNetworkEgrHsmdaQueueEntry  
SEQUENCE    
  tNetworkEgrHsmdaQueue TEgressHsmdaQueueId
  tNetworkEgrHsmdaQueuePIRPercent Unsigned32
  tNetworkEgrHsmdaQueuePIRAdaptn TAdaptationRule
  tNetworkEgrHsmdaQueueWrrWeight THsmdaWrrWeight
  tNetworkEgrHsmdaQueueMBS THSMDABurstSizeBytes
  tNetworkEgrHsmdaQueueSlopePolicy TNamedItem
  tNetworkEgrHsmdaQueueLastChanged TimeStamp
  tNetworkEgrHsmdaQueueBurstLimit THSMDAQueueBurstLimit

TSharedQueuePolicyEntry  
SEQUENCE    
  tSharedQueuePolicy TNamedItem
  tSharedQueuePolicyRowStatus RowStatus
  tSharedQueuePolicyLastChanged TimeStamp
  tSharedQueuePolicyDescription TItemDescription

TSharedQueueEntry  
SEQUENCE    
  tSharedQueueId TQueueId
  tSharedQueueRowStatus RowStatus
  tSharedQueueLastChanged TimeStamp
  tSharedQueuePoolName TNamedItemOrEmpty
  tSharedQueueParent TNamedItemOrEmpty
  tSharedQueueLevel TLevel
  tSharedQueueWeight TWeight
  tSharedQueueCIRLevel TLevelOrDefault
  tSharedQueueCIRWeight TWeight
  tSharedQueueExpedite INTEGER
  tSharedQueueCIR TRatePercent
  tSharedQueuePIR TPIRRatePercent
  tSharedQueueCBS TBurstPercent
  tSharedQueueMBS TBurstPercent
  tSharedQueueHiPrioOnly TBurstPercentOrDefault
  tSharedQueueIsMultipoint TruthValue

TSharedQueueFCEntry  
SEQUENCE    
  tSharedQueueFCName TFCName
  tSharedQueueFCRowStatus RowStatus
  tSharedQueueFCLastChanged TimeStamp
  tSharedQueueFCQueue TQueueId
  tSharedQueueFCMCastQueue TQueueId
  tSharedQueueFCBCastQueue TQueueId
  tSharedQueueFCUnknownQueue TQueueId

TQosIngQGroupEntry  
SEQUENCE    
  tQosIngQGroupName TNamedItem
  tQosIngQGroupRowStatus RowStatus
  tQosIngQGroupLastChanged TimeStamp
  tQosIngQGroupDescr TItemDescription

TQosIngQueueEntry  
SEQUENCE    
  tQosIngQueue TIngressQueueId
  tQosIngQueueRowStatus RowStatus
  tQosIngQueueParent TNamedItemOrEmpty
  tQosIngQueueLevel TLevel
  tQosIngQueueWeight TWeight
  tQosIngQueueCIRLevel TLevelOrDefault
  tQosIngQueueCIRWeight TWeight
  tQosIngQueueMCast TruthValue
  tQosIngQueueExpedite INTEGER
  tQosIngQueueCBS TBurstSize
  tQosIngQueueMBS TBurstSize
  tQosIngQueueHiPrioOnly TBurstPercentOrDefault
  tQosIngQueuePIRAdaptation TAdaptationRule
  tQosIngQueueCIRAdaptation TAdaptationRule
  tQosIngQueueAdminPIR TPIRRate
  tQosIngQueueAdminCIR TCIRRate
  tQosIngQueueLastChanged TimeStamp
  tQosIngQueuePoliced TruthValue
  tQosIngQueueMode TQueueMode
  tQosIngQueuePoolName TNamedItemOrEmpty
  tQosIngQueueMBSBytes TBurstSizeBytes
  tQosIngQueueBurstLimit TBurstLimit
  tQosIngQueueAdvCfgPolicy TNamedItemOrEmpty

TQosEgrQGroupEntry  
SEQUENCE    
  tQosEgrQGroupName TNamedItem
  tQosEgrQGroupRowStatus RowStatus
  tQosEgrQGroupLastChanged TimeStamp
  tQosEgrQGroupDescr TItemDescription

TQosEgrQueueEntry  
SEQUENCE    
  tQosEgrQueue TEgressQueueId
  tQosEgrQueueRowStatus RowStatus
  tQosEgrQueueParent TNamedItemOrEmpty
  tQosEgrQueueLevel TLevel
  tQosEgrQueueWeight TWeight
  tQosEgrQueueCIRLevel TLevelOrDefault
  tQosEgrQueueCIRWeight TWeight
  tQosEgrQueueExpedite INTEGER
  tQosEgrQueueCBS TBurstSize
  tQosEgrQueueMBS TBurstSize
  tQosEgrQueueHiPrioOnly TBurstPercentOrDefault
  tQosEgrQueuePIRAdaptation TAdaptationRule
  tQosEgrQueueCIRAdaptation TAdaptationRule
  tQosEgrQueueAdminPIR TPIRRate
  tQosEgrQueueAdminCIR TCIRRate
  tQosEgrQueueLastChanged TimeStamp
  tQosEgrQueueUsePortParent TruthValue
  tQosEgrQueuePortLvl TLevel
  tQosEgrQueuePortWght TWeight
  tQosEgrQueuePortCIRLvl TLevelOrDefault
  tQosEgrQueuePortCIRWght TWeight
  tQosEgrQueuePoolName TNamedItemOrEmpty
  tQosEgrQueueXPWredQ TruthValue
  tQosEgrQueueXPWredQSlope TNamedItem
  tQosEgrQueueMBSBytes TBurstSizeBytes
  tQosEgrQueueAdminPIRPercent Unsigned32
  tQosEgrQueueAdminCIRPercent Unsigned32
  tQosEgrQueueRateType TRateType
  tQosEgrQueueBurstLimit TBurstLimit
  tQosEgrQueueAdvCfgPolicy TNamedItemOrEmpty
  tQosEgrQueuePktOffset TPerPacketOffset

TQosEgrQGroupFCEntry  
SEQUENCE    
  tQosEgrQGroupFCName TFCName
  tQosEgrQGroupFCRowStatus RowStatus
  tQosEgrQGroupFCLastChanged TimeStamp
  tQosEgrQGroupFCQueue TEgressQueueId

TSlopePolicyEntry  
SEQUENCE    
  tSlopePolicy TNamedItem
  tSlopeRowStatus RowStatus
  tSlopeDescription TItemDescription
  tSlopeHiAdminStatus INTEGER
  tSlopeHiStartAverage Unsigned32
  tSlopeHiMaxAverage Unsigned32
  tSlopeHiMaxProbability Unsigned32
  tSlopeLoAdminStatus INTEGER
  tSlopeLoStartAverage Unsigned32
  tSlopeLoMaxAverage Unsigned32
  tSlopeLoMaxProbability Unsigned32
  tSlopeTimeAvgFactor Unsigned32
  tSlopeLastChanged TimeStamp

THsmdaSlopePolicyEntry  
SEQUENCE    
  tHsmdaSlopePolicyName TNamedItem
  tHsmdaSlopePolicyRowStatus RowStatus
  tHsmdaSlopeLastChanged TimeStamp
  tHsmdaSlopeDescription TItemDescription
  tHsmdaSlopeQueueMbs Unsigned32
  tHsmdaSlopeHiAdminStatus TmnxEnabledDisabled
  tHsmdaSlopeHiStartDepth Unsigned32
  tHsmdaSlopeHiMaxDepth Unsigned32
  tHsmdaSlopeHiMaxProbability Unsigned32
  tHsmdaSlopeLoAdminStatus TmnxEnabledDisabled
  tHsmdaSlopeLoStartDepth Unsigned32
  tHsmdaSlopeLoMaxDepth Unsigned32
  tHsmdaSlopeLoMaxProbability Unsigned32

TSchedulerPolicyEntry  
SEQUENCE    
  tSchedulerPolicyName TNamedItem
  tSchedulerPolicyRowStatus RowStatus
  tSchedulerPolicyDescription TItemDescription
  tSchedulerPolicyLastChanged TimeStamp
  tSchedulerPolicyFrameBasedAccnt TruthValue

TVirtualSchedulerEntry  
SEQUENCE    
  tVirtualSchedulerTier INTEGER
  tVirtualSchedulerName TNamedItem
  tVirtualSchedulerRowStatus RowStatus
  tVirtualSchedulerDescription TItemDescription
  tVirtualSchedulerParent TNamedItemOrEmpty
  tVirtualSchedulerLevel TLevel
  tVirtualSchedulerWeight TWeight
  tVirtualSchedulerCIRLevel TLevelOrDefault
  tVirtualSchedulerCIRWeight TWeight
  tVirtualSchedulerPIR THPolVirtualSchePIRRate
  tVirtualSchedulerCIR THPolVirtualScheCIRRate
  tVirtualSchedulerSummedCIR TruthValue
  tVirtualSchedulerLastChanged TimeStamp
  tVirtualSchedulerUsePortParent TruthValue
  tVirtualSchedulerPortLvl TLevel
  tVirtualSchedulerPortWght TWeight
  tVirtualSchedulerPortCIRLvl TLevelOrDefault
  tVirtualSchedulerPortCIRWght TWeight

TPortSchedulerPlcyEntry  
SEQUENCE    
  tPortSchedulerPlcyName TNamedItem
  tPortSchedulerPlcyRowStatus RowStatus
  tPortSchedulerPlcyDescription TItemDescription
  tPortSchedulerPlcyLastChanged TimeStamp
  tPortSchedulerPlcyMaxRate TPortSchedulerPIRRate
  tPortSchedulerPlcyLvl1PIR TPortSchedulerPIRRate
  tPortSchedulerPlcyLvl1CIR TPortSchedulerCIR
  tPortSchedulerPlcyLvl2PIR TPortSchedulerPIRRate
  tPortSchedulerPlcyLvl2CIR TPortSchedulerCIR
  tPortSchedulerPlcyLvl3PIR TPortSchedulerPIRRate
  tPortSchedulerPlcyLvl3CIR TPortSchedulerCIR
  tPortSchedulerPlcyLvl4PIR TPortSchedulerPIRRate
  tPortSchedulerPlcyLvl4CIR TPortSchedulerCIR
  tPortSchedulerPlcyLvl5PIR TPortSchedulerPIRRate
  tPortSchedulerPlcyLvl5CIR TPortSchedulerCIR
  tPortSchedulerPlcyLvl6PIR TPortSchedulerPIRRate
  tPortSchedulerPlcyLvl6CIR TPortSchedulerCIR
  tPortSchedulerPlcyLvl7PIR TPortSchedulerPIRRate
  tPortSchedulerPlcyLvl7CIR TPortSchedulerCIR
  tPortSchedulerPlcyLvl8PIR TPortSchedulerPIRRate
  tPortSchedulerPlcyLvl8CIR TPortSchedulerCIR
  tPortSchedulerPlcyOrphanLvl TLevel
  tPortSchedulerPlcyOrphanWeight TWeight
  tPortSchedulerPlcyOrphanCIRLvl TLevelOrDefault
  tPortSchedulerPlcyOrphanCIRWght TWeight

THsmdaSchedulerPlcyEntry  
SEQUENCE    
  tHsmdaSchedulerPlcyName TNamedItem
  tHsmdaSchedulerPlcyRowStatus RowStatus
  tHsmdaSchedulerPlcyDescription TItemDescription
  tHsmdaSchedulerPlcyMaxRate THsmdaPIRMRate
  tHsmdaSchedulerPlcyLvl1Rate THsmdaPIRMRate
  tHsmdaSchedulerPlcyLvl1GrpId THsmdaSchedulerPolicyGroupId
  tHsmdaSchedulerPlcyLvl1WgtInGrp THsmdaWeight
  tHsmdaSchedulerPlcyLvl2Rate THsmdaPIRMRate
  tHsmdaSchedulerPlcyLvl2GrpId THsmdaSchedulerPolicyGroupId
  tHsmdaSchedulerPlcyLvl2WgtInGrp THsmdaWeight
  tHsmdaSchedulerPlcyLvl3Rate THsmdaPIRMRate
  tHsmdaSchedulerPlcyLvl3GrpId THsmdaSchedulerPolicyGroupId
  tHsmdaSchedulerPlcyLvl3WgtInGrp THsmdaWeight
  tHsmdaSchedulerPlcyLvl4Rate THsmdaPIRMRate
  tHsmdaSchedulerPlcyLvl4GrpId THsmdaSchedulerPolicyGroupId
  tHsmdaSchedulerPlcyLvl4WgtInGrp THsmdaWeight
  tHsmdaSchedulerPlcyLvl5Rate THsmdaPIRMRate
  tHsmdaSchedulerPlcyLvl5GrpId THsmdaSchedulerPolicyGroupId
  tHsmdaSchedulerPlcyLvl5WgtInGrp THsmdaWeight
  tHsmdaSchedulerPlcyLvl6Rate THsmdaPIRMRate
  tHsmdaSchedulerPlcyLvl6GrpId THsmdaSchedulerPolicyGroupId
  tHsmdaSchedulerPlcyLvl6WgtInGrp THsmdaWeight
  tHsmdaSchedulerPlcyLvl7Rate THsmdaPIRMRate
  tHsmdaSchedulerPlcyLvl7GrpId THsmdaSchedulerPolicyGroupId
  tHsmdaSchedulerPlcyLvl7WgtInGrp THsmdaWeight
  tHsmdaSchedulerPlcyLvl8Rate THsmdaPIRMRate
  tHsmdaSchedulerPlcyLvl8GrpId THsmdaSchedulerPolicyGroupId
  tHsmdaSchedulerPlcyLvl8WgtInGrp THsmdaWeight
  tHsmdaSchedulerPlcyLastChanged TimeStamp
  tHsmdaSchedulerPlcyGrp1Rate THsmdaPIRMRate
  tHsmdaSchedulerPlcyGrp2Rate THsmdaPIRMRate
  tHsmdaSchedulerPlcyBrstLimit TClassBurstLimit
  tHsmdaSchedulerPlcyGrp1BrstLimit TClassBurstLimit
  tHsmdaSchedulerPlcyGrp2BrstLimit TClassBurstLimit
  tHsmdaSchedulerPlcyLvl1BrstLimit TClassBurstLimit
  tHsmdaSchedulerPlcyLvl2BrstLimit TClassBurstLimit
  tHsmdaSchedulerPlcyLvl3BrstLimit TClassBurstLimit
  tHsmdaSchedulerPlcyLvl4BrstLimit TClassBurstLimit
  tHsmdaSchedulerPlcyLvl5BrstLimit TClassBurstLimit
  tHsmdaSchedulerPlcyLvl6BrstLimit TClassBurstLimit
  tHsmdaSchedulerPlcyLvl7BrstLimit TClassBurstLimit
  tHsmdaSchedulerPlcyLvl8BrstLimit TClassBurstLimit

TAtmTdpEntry  
SEQUENCE    
  tAtmTdpIndex AtmTrafficDescrParamIndex
  tAtmTdpSir Unsigned32
  tAtmTdpPir Unsigned32
  tAtmTdpMbs Unsigned32
  tAtmTdpMir Unsigned32
  tAtmTdpShaping INTEGER
  tAtmTdpServCat AtmServiceCategory
  tAtmTdpDescription TItemDescription
  tAtmTdpLastChanged TimeStamp
  tAtmTdpRowStatus RowStatus
  tAtmTdpDescrType TAtmTdpDescrType
  tAtmTdpCdvt Unsigned32
  tAtmTdpPolicing INTEGER
  tAtmTdpCLPTagging INTEGER
  tAtmTdpWeight Integer32

TNamedPoolPolicyEntry  
SEQUENCE    
  tNamedPoolPolicyName TNamedItem
  tNamedPoolPolicyRowStatus RowStatus
  tNamedPoolPolicyLastChanged TimeStamp
  tNamedPoolPolicyDescription TItemDescription
  tNamedPoolPolicyQ1DefaultWeight Unsigned32
  tNamedPoolPolicyQ1MdaWeight Unsigned32
  tNamedPoolPolicyQ1PortWeight Unsigned32

TQ1NamedPoolEntry  
SEQUENCE    
  tQ1NamedPoolPolicyName TNamedItem
  tQ1NamedPoolName TNamedItem
  tQ1NamedPoolRowStatus RowStatus
  tQ1NamedPoolLastChanged TimeStamp
  tQ1NamedPoolDescription TItemDescription
  tQ1NamedPoolNetworkAllocWeight Unsigned32
  tQ1NamedPoolAccessAllocWeight Unsigned32
  tQ1NamedPoolSlopePolicy TNamedItemOrEmpty
  tQ1NamedPoolReservedCbs Integer32
  tQ1NamedPoolResvCbsAmbrAlrmStep Integer32
  tQ1NamedPoolResvCbsAmbrAlrmMax Integer32
  tQ1NamedPoolAmbrAlrmThresh Integer32
  tQ1NamedPoolRedAlrmThresh Integer32

THsmdaPoolPolicyEntry  
SEQUENCE    
  tHsmdaPoolPolicyName TNamedItem
  tHsmdaPoolPolicyRowStatus RowStatus
  tHsmdaPoolLastChanged TimeStamp
  tHsmdaPoolDescription TItemDescription
  tHsmdaPoolSystemReserve Unsigned32
  tHsmdaPoolRoot1AllocWeight TWeight
  tHsmdaPoolRoot2AllocWeight TWeight
  tHsmdaPoolRoot3AllocWeight TWeight
  tHsmdaPoolRoot4AllocWeight TWeight
  tHsmdaPoolRoot5AllocWeight TWeight
  tHsmdaPoolRoot6AllocWeight TWeight
  tHsmdaPoolRoot7AllocWeight TWeight
  tHsmdaPoolRoot8AllocWeight TWeight
  tHsmdaPoolClass1Parent Unsigned32
  tHsmdaPoolClass1AllocPercent Unsigned32
  tHsmdaPoolClass2Parent Unsigned32
  tHsmdaPoolClass2AllocPercent Unsigned32
  tHsmdaPoolClass3Parent Unsigned32
  tHsmdaPoolClass3AllocPercent Unsigned32
  tHsmdaPoolClass4Parent Unsigned32
  tHsmdaPoolClass4AllocPercent Unsigned32
  tHsmdaPoolClass5Parent Unsigned32
  tHsmdaPoolClass5AllocPercent Unsigned32
  tHsmdaPoolClass6Parent Unsigned32
  tHsmdaPoolClass6AllocPercent Unsigned32
  tHsmdaPoolClass7Parent Unsigned32
  tHsmdaPoolClass7AllocPercent Unsigned32
  tHsmdaPoolClass8Parent Unsigned32
  tHsmdaPoolClass8AllocPercent Unsigned32

TMcMlpppIngrProfEntry  
SEQUENCE    
  tMcMlpppIngrProfIndex TMlpppQoSProfileId
  tMcMlpppIngrProfDescription TItemDescription
  tMcMlpppIngrProfLastChanged TimeStamp
  tMcMlpppIngrProfRowStatus RowStatus

TMcMlpppIngrClassEntry  
SEQUENCE    
  tMcMlpppIngrClassIndex TmnxMcMlpppClassIndex
  tMcMlpppIngrClassReassemblyTmout Unsigned32
  tMcMlpppIngrClassLastChanged TimeStamp

TMcMlpppEgrProfEntry  
SEQUENCE    
  tMcMlpppEgrProfIndex TMlpppQoSProfileId
  tMcMlpppEgrProfDescription TItemDescription
  tMcMlpppEgrProfLastChanged TimeStamp
  tMcMlpppEgrProfRowStatus RowStatus

TMcMlpppEgrClassEntry  
SEQUENCE    
  tMcMlpppEgrClassIndex TmnxMcMlpppClassIndex
  tMcMlpppEgrClassMir Unsigned32
  tMcMlpppEgrClassWeight Unsigned32
  tMcMlpppEgrClassMaxSize Unsigned32
  tMcMlpppEgrClassLastChanged TimeStamp

TMcMlpppEgrFCEntry  
SEQUENCE    
  tMcMlpppEgrFCName TFCName
  tMcMlpppEgrFCClass Unsigned32
  tMcMlpppEgrFCLastChanged TimeStamp

TMcFrIngrProfEntry  
SEQUENCE    
  tMcFrIngrProfIndex TMcFrQoSProfileId
  tMcFrIngrProfDescription TItemDescription
  tMcFrIngrProfLastChanged TimeStamp
  tMcFrIngrProfRowStatus RowStatus

TMcFrIngrClassEntry  
SEQUENCE    
  tMcFrIngrClassIndex TmnxMcFrClassIndex
  tMcFrIngrClassReassemblyTmout Unsigned32
  tMcFrIngrClassLastChanged TimeStamp

TMcFrEgrProfEntry  
SEQUENCE    
  tMcFrEgrProfIndex TMcFrQoSProfileId
  tMcFrEgrProfDescription TItemDescription
  tMcFrEgrProfLastChanged TimeStamp
  tMcFrEgrProfRowStatus RowStatus

TMcFrEgrClassEntry  
SEQUENCE    
  tMcFrEgrClassIndex TmnxMcFrClassIndex
  tMcFrEgrClassMir Unsigned32
  tMcFrEgrClassWeight Unsigned32
  tMcFrEgrClassMaxSize Unsigned32
  tMcFrEgrClassLastChanged TimeStamp

TQosPolicerCtrlPolEntry  
SEQUENCE    
  tQosPolicerCtrlPolName TNamedItem
  tQosPolicerCtrlPolRowStatus RowStatus
  tQosPolicerCtrlPolLastChgd TimeStamp
  tQosPolicerCtrlPolDescr TItemDescription
  tQosPolicerCtrlPolRootMaxRate THPolPIRRate
  tQosPolicerCtrlPolMinMBSSep TPlcrBurstSizeBytes
  tQosPolicerCtrlPolProfPref TruthValue

TQosPolicerLevelEntry  
SEQUENCE    
  tQosPolicerLevel TLevel
  tQosPolicerLevelLastChgd TimeStamp
  tQosPolicerLevelCumMBS TPlcrBurstSizeBytes
  tQosPolicerLevelFixedMBS TruthValue

TQosPolicerArbiterEntry  
SEQUENCE    
  tQosPolicerArbiterTier INTEGER
  tQosPolicerArbiterName TNamedItem
  tQosPolicerArbiterRowStatus RowStatus
  tQosPolicerArbiterLastChgd TimeStamp
  tQosPolicerArbiterDescr TItemDescription
  tQosPolicerArbiterRate THPolPIRRate
  tQosPolicerArbiterParent TNamedItemOrEmpty
  tQosPolicerArbiterLevel TLevel
  tQosPolicerArbiterWeight TPolicerWeight

TQosIngPolicerEntry  
SEQUENCE    
  tQosIngPolicerId TIngPolicerId
  tQosIngPolicerRowStatus RowStatus
  tQosIngPolicerLastChanged TimeStamp
  tQosIngPolicerDescr TItemDescription
  tQosIngPolicerPIRAdaptation TAdaptationRule
  tQosIngPolicerCIRAdaptation TAdaptationRule
  tQosIngPolicerParent TNamedItemOrEmpty
  tQosIngPolicerLevel TLevel
  tQosIngPolicerWeight TPolicerWeight
  tQosIngPolicerAdminPIR THPolPIRRate
  tQosIngPolicerAdminCIR THPolCIRRate
  tQosIngPolicerCBS TPlcrBurstSizeBytes
  tQosIngPolicerMBS TPlcrBurstSizeBytes
  tQosIngPolicerHiPrioOnly TBurstPercentOrDefault
  tQosIngPolicerPktOffset TPerPacketOffset
  tQosIngPolicerProfileCapped TruthValue
  tQosIngPolicerStatMode TmnxIngPolicerStatMode
  tQosIngPolicerSlopeStartDepth Unsigned32
  tQosIngPolicerSlopeMaxDepth Unsigned32
  tQosIngPolicerSlopeMaxProb Unsigned32
  tQosIngPolicerSlopeMap TmnxSlopeMap
  tQosIngPolicerAdvCfgPolicy TNamedItemOrEmpty

TQosEgrPolicerEntry  
SEQUENCE    
  tQosEgrPolicerId TEgrPolicerId
  tQosEgrPolicerRowStatus RowStatus
  tQosEgrPolicerLastChanged TimeStamp
  tQosEgrPolicerDescr TItemDescription
  tQosEgrPolicerPIRAdaptation TAdaptationRule
  tQosEgrPolicerCIRAdaptation TAdaptationRule
  tQosEgrPolicerParent TNamedItemOrEmpty
  tQosEgrPolicerLevel TLevel
  tQosEgrPolicerWeight TPolicerWeight
  tQosEgrPolicerAdminPIR THPolPIRRate
  tQosEgrPolicerAdminCIR THPolCIRRate
  tQosEgrPolicerCBS TPlcrBurstSizeBytes
  tQosEgrPolicerMBS TPlcrBurstSizeBytes
  tQosEgrPolicerHiPrioOnly TBurstPercentOrDefault
  tQosEgrPolicerPktOffset TPerPacketOffset
  tQosEgrPolicerProfileCapped TruthValue
  tQosEgrPolicerStatMode TmnxEgrPolicerStatMode
  tQosEgrPolicerSlopeStartDepth Unsigned32
  tQosEgrPolicerSlopeMaxDepth Unsigned32
  tQosEgrPolicerSlopeMaxProb Unsigned32
  tQosEgrPolicerSlopeMap TmnxSlopeMap
  tQosEgrPolicerAdvCfgPolicy TNamedItemOrEmpty

TAdvCfgPolicyEntry  
SEQUENCE    
  tAdvCfgPolicyName TNamedItem
  tAdvCfgPolicyRowStatus RowStatus
  tAdvCfgLastChanged TimeStamp
  tAdvCfgDescription TItemDescription
  tAdvCfgChildAdmnPirPrcnt Unsigned32
  tAdvCfgChildAdminRate TAdvCfgRate
  tAdvCfgOMGranPirPrcnt Unsigned32
  tAdvCfgOMGranRate TAdvCfgRate
  tAdvCfgMaxDecPirPrcnt Unsigned32
  tAdvCfgMaxDecRate TMaxDecRate
  tAdvCfgHiRateHoldTime Unsigned32
  tAdvCfgTimeAvgFactor Unsigned32
  tAdvCfgSampleInterval Unsigned32
  tAdvCfgFastStart TruthValue
  tAdvCfgFastStop TruthValue
  tAdvCfgAbvOffCapPirPrcnt Unsigned32
  tAdvCfgAbvOffCapRate Integer32
  tAdvCfgBWDGranPirPrcnt Unsigned32
  tAdvCfgBWDGranRate TAdvCfgRate
  tAdvCfgMinOnly TruthValue
  tAdvCfgDecOnly TruthValue

TPortSchPlcyGrpEntry  
SEQUENCE    
  tPortSchPlcyGrpName TNamedItem
  tPortSchPlcyGrpRowStatus RowStatus
  tPortSchPlcyGrpLastChanged TimeStamp
  tPortSchPlcyGrpAdminPIR TPortSchedulerPIRRate
  tPortSchPlcyGrpAdminCIR TPortSchedulerCIR

TPortSchPlcyLvlGrpEntry  
SEQUENCE    
  tPortSchPlcyLvlGrpLastChanged TimeStamp
  tPortSchPlcyLvl1GrpName TNamedItemOrEmpty
  tPortSchPlcyLvl2GrpName TNamedItemOrEmpty
  tPortSchPlcyLvl3GrpName TNamedItemOrEmpty
  tPortSchPlcyLvl4GrpName TNamedItemOrEmpty
  tPortSchPlcyLvl5GrpName TNamedItemOrEmpty
  tPortSchPlcyLvl6GrpName TNamedItemOrEmpty
  tPortSchPlcyLvl7GrpName TNamedItemOrEmpty
  tPortSchPlcyLvl8GrpName TNamedItemOrEmpty
  tPortSchPlcyLvl1GrpWeight TNonZeroWeight
  tPortSchPlcyLvl2GrpWeight TNonZeroWeight
  tPortSchPlcyLvl3GrpWeight TNonZeroWeight
  tPortSchPlcyLvl4GrpWeight TNonZeroWeight
  tPortSchPlcyLvl5GrpWeight TNonZeroWeight
  tPortSchPlcyLvl6GrpWeight TNonZeroWeight
  tPortSchPlcyLvl7GrpWeight TNonZeroWeight
  tPortSchPlcyLvl8GrpWeight TNonZeroWeight

THsmdaWrrPolicyEntry  
SEQUENCE    
  tHsmdaWrrPolicyName TNamedItem
  tHsmdaWrrPolicyRowStatus RowStatus
  tHsmdaWrrPolicyLastChanged TimeStamp
  tHsmdaWrrPolicyDescription TItemDescription
  tHsmdaWrrPolicyIncludeQueues THsmdaPolicyIncludeQueues
  tHsmdaWrrPolicySchedUsingClass THsmdaPolicyScheduleClass
  tHsmdaWrrPolicyAggWeightAtClass THsmdaWeightClass

TNetworkIngressFCEntry  
SEQUENCE    
  tNetworkIngressFCName TFCName
  tNetworkIngressFCLastChanged TimeStamp
  tNetworkIngressFCMultiCastPlcr TIngPolicerIdOrNone
  tNetworkIngressFCUniCastPlcr TIngPolicerIdOrNone

TNetworkEgressDSCPEntry  
SEQUENCE    
  tNetworkEgressDSCP TDSCPName
  tNetworkEgressDSCPRowStatus RowStatus
  tNetworkEgressDSCPLastChanged TimeStamp
  tNetworkEgressDSCPFC TFCName
  tNetworkEgressDSCPProfile TProfile

TNetworkEgressPrecEntry  
SEQUENCE    
  tNetworkEgressPrecValue TPrecValue
  tNetworkEgressPrecRowStatus RowStatus
  tNetworkEgressPrecLastChanged TimeStamp
  tNetworkEgressPrecFC TFCName
  tNetworkEgressPrecProfile TProfile

Defined Values

timetraQosMIBModule 1.3.6.1.4.1.6527.1.1.3.16
This document is the SNMP MIB module to manage and provision Quality of Service features on Alcatel-Lucent SROS systems. Copyright 2003-2014 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel-Lucent's proprietary intellectual property. Alcatel-Lucent retains all title and ownership in the Specification, including any revisions. Alcatel-Lucent grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel-Lucent products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Alcatel-Lucent makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
MODULE-IDENTITY    

tQosObjects 1.3.6.1.4.1.6527.3.1.2.16
OBJECT IDENTIFIER    

tQosNotifyPrefix 1.3.6.1.4.1.6527.3.1.3.16
OBJECT IDENTIFIER    

tQosNotifications 1.3.6.1.4.1.6527.3.1.3.16.0
OBJECT IDENTIFIER    

tmnxQosConformance 1.3.6.1.4.1.6527.3.1.1.16
OBJECT IDENTIFIER    

tDSCPObjects 1.3.6.1.4.1.6527.3.1.2.16.1
OBJECT IDENTIFIER    

tFCObjects 1.3.6.1.4.1.6527.3.1.2.16.2
OBJECT IDENTIFIER    

tSapIngressObjects 1.3.6.1.4.1.6527.3.1.2.16.3
OBJECT IDENTIFIER    

tSapEgressObjects 1.3.6.1.4.1.6527.3.1.2.16.4
OBJECT IDENTIFIER    

tNetworkObjects 1.3.6.1.4.1.6527.3.1.2.16.5
OBJECT IDENTIFIER    

tNetworkQueueObjects 1.3.6.1.4.1.6527.3.1.2.16.6
OBJECT IDENTIFIER    

tSharedQueueObjects 1.3.6.1.4.1.6527.3.1.2.16.7
OBJECT IDENTIFIER    

tSlopeObjects 1.3.6.1.4.1.6527.3.1.2.16.10
OBJECT IDENTIFIER    

tSchedulerObjects 1.3.6.1.4.1.6527.3.1.2.16.12
OBJECT IDENTIFIER    

tQosTimeStampObjects 1.3.6.1.4.1.6527.3.1.2.16.20
OBJECT IDENTIFIER    

tAtmTdpObjects 1.3.6.1.4.1.6527.3.1.2.16.21
OBJECT IDENTIFIER    

tPoolObjects 1.3.6.1.4.1.6527.3.1.2.16.22
OBJECT IDENTIFIER    

tMcMlpppIngressObjects 1.3.6.1.4.1.6527.3.1.2.16.23
OBJECT IDENTIFIER    

tMcMlpppEgressObjects 1.3.6.1.4.1.6527.3.1.2.16.24
OBJECT IDENTIFIER    

tMcFrIngressObjects 1.3.6.1.4.1.6527.3.1.2.16.25
OBJECT IDENTIFIER    

tMcFrEgressObjects 1.3.6.1.4.1.6527.3.1.2.16.26
OBJECT IDENTIFIER    

tQosPolicerObjects 1.3.6.1.4.1.6527.3.1.2.16.27
OBJECT IDENTIFIER    

tWrrObjects 1.3.6.1.4.1.6527.3.1.2.16.28
OBJECT IDENTIFIER    

tDSCPNameTable 1.3.6.1.4.1.6527.3.1.2.16.1.1
A list of all DSCP Names. DSCP Name entries must exist here and be active before they can be referenced elsewhere (e.g. IP filter).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TDSCPNameEntry

tDSCPNameEntry 1.3.6.1.4.1.6527.3.1.2.16.1.1.1
Information about a particular DSCP Name, particularly the DSCP value. It maps a DSCP Name into a DSCP value. Some default entries are created by the agent. Default entries have tDSCPNameStorageType permanent, and can not be deleted. Entries cannot be created by user but may be supported later. An attempt to create a row in this table would return no creation.
Status: current Access: not-accessible
OBJECT-TYPE    
  TDSCPNameEntry  

tDSCPName 1.3.6.1.4.1.6527.3.1.2.16.1.1.1.1
The name assigned to the DSCP Value.
Status: current Access: not-accessible
OBJECT-TYPE    
  TDSCPName  

tDSCPNameRowStatus 1.3.6.1.4.1.6527.3.1.2.16.1.1.1.2
Row Status of the entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tDSCPNameStorageType 1.3.6.1.4.1.6527.3.1.2.16.1.1.1.3
The storage type of this row in the table.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

tDSCPNameDscpValue 1.3.6.1.4.1.6527.3.1.2.16.1.1.1.4
The DSCP Value.
Status: current Access: read-create
OBJECT-TYPE    
  TDSCPValue  

tDSCPNameLastChanged 1.3.6.1.4.1.6527.3.1.2.16.1.1.1.5
timestamp of last change to this row in tDSCPNameTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tFCNameTable 1.3.6.1.4.1.6527.3.1.2.16.2.1
A list of all Forwarding Class Names. Forwarding Class Name entries must exist here and be active before they can be referenced elsewhere (e.g. qos queue).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TFCNameEntry

tFCNameEntry 1.3.6.1.4.1.6527.3.1.2.16.2.1.1
Information about a particular Forwarding Class Name, particularly the Forwarding Class value. Some default entries are created by the agent. Default entries have tFCStorageType permanent, and can not be deleted. Entries cannot be created by user but maybe supported in future. An attempt to create a row in this table would return no creation.
Status: current Access: not-accessible
OBJECT-TYPE    
  TFCNameEntry  

tFCName 1.3.6.1.4.1.6527.3.1.2.16.2.1.1.1
Forwarding class name.
Status: current Access: not-accessible
OBJECT-TYPE    
  TFCName  

tFCRowStatus 1.3.6.1.4.1.6527.3.1.2.16.2.1.1.2
Row Status of the entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tFCStorageType 1.3.6.1.4.1.6527.3.1.2.16.2.1.1.3
The storage type of this row in the table.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

tFCValue 1.3.6.1.4.1.6527.3.1.2.16.2.1.1.4
FC Value.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..7  

tFCNameLastChanged 1.3.6.1.4.1.6527.3.1.2.16.2.1.1.5
timestamp of last change to this row in tFCNameTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapIngressTable 1.3.6.1.4.1.6527.3.1.2.16.3.1
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TSapIngressEntry

tSapIngressEntry 1.3.6.1.4.1.6527.3.1.2.16.3.1.1
Information about a particular Sap Ingress Policy. sap-ingress policy (1) is the default entry. Default Entry is created by the agent, other entries are created by user. Default Entry cannot be modified/deleted. The other entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapIngressEntry  

tSapIngressIndex 1.3.6.1.4.1.6527.3.1.2.16.3.1.1.1
the policy ID is the index to this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapIngressPolicyID 1..65535 | 65536 | 65537  

tSapIngressRowStatus 1.3.6.1.4.1.6527.3.1.2.16.3.1.1.2
Row Status for the policy. The deletion of this row has an action of removing the dependent rows in the following tables : - tSapIngressQueueTable - tSapIngressDSCPTable - tSapIngressDot1pTable
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tSapIngressScope 1.3.6.1.4.1.6527.3.1.2.16.3.1.1.3
Scope of the policy. If the scope is 'exclusive', it can only be instantiated once whereas it could have multiple instances if defined as 'exclusive'.
Status: current Access: read-create
OBJECT-TYPE    
  TItemScope  

tSapIngressDescription 1.3.6.1.4.1.6527.3.1.2.16.3.1.1.4
user-provided description of the policy.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tSapIngressDefaultFC 1.3.6.1.4.1.6527.3.1.2.16.3.1.1.5
tSapIngressDefaultFC specifies the forwarding class or the sub forwarding class which should be used for all traffic that does not match a specific classification specified in this SAP ingress QoS policy. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. If not specified explicitly, all traffic will be classified as best-effort 'be'.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItem  

tSapIngressDefaultFCPriority 1.3.6.1.4.1.6527.3.1.2.16.3.1.1.6
the priority to assign to traffic ingressing as the default action queue.
Status: current Access: read-create
OBJECT-TYPE    
  TPriority  

tSapIngressMatchCriteria 1.3.6.1.4.1.6527.3.1.2.16.3.1.1.7
indicates which type of match criteria the policy should use. when set to ip(1), the policy looks for match entries in tSapIngressIPCriteriaTable or tSapIngressIPv6CriteriaTable. When set to mac(2), the policy looks for match entries in tSapIngressMacCriteriaTable. the value of tSapIngressMatchCriteria is set when the first match criteria table entry is created. the value is set to none(3) when the last criteria table entry is removed. when tSapIngressMatchCriteria is set to ip(1), no tSapIngressMacCriteriaTable entries can be created. when set to mac(2), no tSapIngressIPCriteriaTable or tSapIngressIPv6CriteriaTable entries can be created.
Status: current Access: read-only
OBJECT-TYPE    
  TMatchCriteria  

tSapIngressLastChanged 1.3.6.1.4.1.6527.3.1.2.16.3.1.1.8
timestamp of last change to this row in tSapIngressTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapIngressHsmdaPacketOffset 1.3.6.1.4.1.6527.3.1.2.16.3.1.1.9
The value of tSapIngressHsmdaPacketOffset specifies the value, in bytes, of the adjustment to make to the size of each packet for HSMDA queue accounting. This object is obsoleted in 10.0 Release.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TIngressHsmdaPerPacketOffset  

tSapIngressDefFCHsmdaCntrOvr 1.3.6.1.4.1.6527.3.1.2.16.3.1.1.10
The value of the object tSapIngressDefFCHsmdaCntrOvr specifies the counter to use for all traffic that does not match a specific classification specified in this SAP ingress QoS policy. A value of zero implies that the default counters should be used. This object is obsoleted in 10.0 Release.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TIngressHsmdaCounterIdOrZero  

tSapIngressMacCritType 1.3.6.1.4.1.6527.3.1.2.16.3.1.1.11
tSapIngressMacCritType specifies which type of entries this mac filter can contain. If tSapIngressMacCritType is set to 'normal(1)', all match criteria are accepted except the criteria mentioned below that belong to type vid(3) or isid(2). tSapIngressMacCritType 'isid(2)' is not supported here. If tSapIngressMacCritType is set to vid(3) the only accepted match criteria for the filter entries are: - tSapIngressMacCritInnerTagValue - tSapIngressMacCritInnerTagMask - tSapIngressMacCritOuterTagValue - tSapIngressMacCritOuterTagMask tSapIngressMacCritType can only be changed if the filter has no entries. The value will be set to 'normal(1)' if IP or IPV6 criteria are added to the this SAP ingress QoS policy. Any change attempt in this case will be silently discarded.
Status: current Access: read-create
OBJECT-TYPE    
  TMacFilterType  

tSapIngressPolicyName 1.3.6.1.4.1.6527.3.1.2.16.3.1.1.12
The value of tSapIngressPolicyName specifies the name to associate with this policy.
Status: current Access: read-create
OBJECT-TYPE    
  TLNamedItemOrEmpty  

tSapIngressQueueTable 1.3.6.1.4.1.6527.3.1.2.16.3.2
information about all sap-ingress policies' queues.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TSapIngressQueueEntry

tSapIngressQueueEntry 1.3.6.1.4.1.6527.3.1.2.16.3.2.1
Information about a particular queue for a sap-ingress policy. Queue (1) is the used as a default for unicast and queue (11) is used as a default for multicast. Both these are created by the agent and can be edited but not removed from the system. Other entries are created by user.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapIngressQueueEntry  

tSapIngressQueue 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.1
The queue ID is used as the secondary index to the table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  TIngressQueueId 1..32  

tSapIngressQueueRowStatus 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.2
Row Status of the entry. This allows creation/deletion of rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tSapIngressQueueParent 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.3
The scheduler to which this queue would be feeding to.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tSapIngressQueueLevel 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.4
This specifies the level of priority while feeding to the parent.
Status: current Access: read-create
OBJECT-TYPE    
  TLevel  

tSapIngressQueueWeight 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.5
The weight that needs to be used by the scheduler to which this queue would be feeding to.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

tSapIngressQueueCIRLevel 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.6
This specifies the level of priority while feeding to the parent. The level '0' means treat all offered load for this queue as for the above CIR traffic.
Status: current Access: read-create
OBJECT-TYPE    
  TLevelOrDefault  

tSapIngressQueueCIRWeight 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.7
The weight that needs to be used until the committed rate by the scheduler to which this queue would be feeding to.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

tSapIngressQueueMCast 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.8
This object specifies if this is a multicast queue or not.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tSapIngressQueueExpedite 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.9
tSapIngressQueueExpedite specifies the priority that this queue should be assigned by the hardware level schedulers. The value 'auto-expedited' implies that this attribute should be dynamically updated by looking at the forwarding classes mapping into this queue. In such a case the queue is treated as 'non-expedited' if there is even a single non-expedited forwarding class using this queue. This attribute is associated with the queue at the time of creation and cannot be modified thereafter.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER expedited(1), auto-expedited(2), non-expedited(3)  

tSapIngressQueueCBS 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.10
The amount of reserved buffer space (in kilo bytes) for the queue.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstSize  

tSapIngressQueueMBS 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.11
The maximum amount of buffer space (in kilo bytes) allowed for the queue. This object has been replaced with tSapIngressQueueMBSBytes object.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TBurstSize  

tSapIngressQueueHiPrioOnly 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.12
The percentage of buffer space for the queue, used exclusively by high priority packets.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstPercentOrDefault  

tSapIngressQueuePIRAdaptation 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.13
The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
Status: current Access: read-create
OBJECT-TYPE    
  TAdaptationRule  

tSapIngressQueueCIRAdaptation 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.14
The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
Status: current Access: read-create
OBJECT-TYPE    
  TAdaptationRule  

tSapIngressQueueAdminPIR 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.15
The administrative PIR specified by the user.
Status: current Access: read-create
OBJECT-TYPE    
  TPIRRate  

tSapIngressQueueAdminCIR 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.16
The administrative CIR specified by the user.
Status: current Access: read-create
OBJECT-TYPE    
  TCIRRate  

tSapIngressQueueOperPIR 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.17
The operating PIR.
Status: obsolete Access: read-only
OBJECT-TYPE    
  TPIRRate  

tSapIngressQueueOperCIR 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.18
The operational value derived by computing the CIR value from the administrative CIR and PIR values and their corresponding adaptation rules.
Status: obsolete Access: read-only
OBJECT-TYPE    
  TCIRRate  

tSapIngressQueueLastChanged 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.19
timestamp of last change to this row in tSapIngressQueueTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapIngressQueuePoliced 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.20
tSapIngressQueuePoliced specifies that the out of profile traffic feeding into the physical queue instance should be dropped. tSapIngressQueuePoliced overrides the bandwidth specified by the object tSapIngressQueueAdminCIR.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tSapIngressQueueMode 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.21
tSapIngressQueueMode specifies the mode in which the queue is operating. This attribute is associated with the queue at the time of creation and cannot be modified thereafter.
Status: current Access: read-create
OBJECT-TYPE    
  TQueueMode  

tSapIngressQueuePoolName 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.22
The value of tSapIngressQueuePoolName specifies the name of the pool to be applied for SAP ingress queue.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tSapIngressQueueMBSBytes 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.23
The maximum amount of buffer space (in bytes) allowed for the queue.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstSizeBytes  

tSapIngressQueueBurstLimit 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.24
The value of tSapIngressQueueBurstLimit specifies the explicit shaping burst size of a queue.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstLimit  

tSapIngressQueueAdminPIRPercent 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.25
The administrative PIR percentage, in hundredths of a percent. An 'inconsistentValue' error is returned if tSapIngressQueueAdminPIRPercent is set to non-default value when the object tSapIngressQueueRateType is set to 'kbps'.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..10000  

tSapIngressQueueAdminCIRPercent 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.26
The administrative CIR percentage, in hundredths of a percent. An 'inconsistentValue' error is returned if tSapIngressQueueAdminCIRPercent is set to non-default value when the object tSapIngressQueueRateType is set to 'kbps'.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..10000  

tSapIngressQueueRateType 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.27
The value of tSapIngressQueueRateType specifies the type of Ingress Queue rate. When the value of the object is set to 'kbps', the ingresss queue rates are specified in kbps. The objects tSapIngressQueueAdminCIRPercent and tSapIngressQueueAdminPIRPercent will be set to their default values. When the value of the object is set to either 'percentOfPortLimit' or 'percentOfLocalLimit', the ingress queue rates are specified in percentage. The objects tSapIngressQueueAdminCIR and tSapIngressQueueAdminPIR will be set to their default values.
Status: current Access: read-create
OBJECT-TYPE    
  TBWRateType  

tSapIngressQueueAdvCfgPolicy 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.28
The value of tSapIngressQueueAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this queue.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tSapIngressDSCPTable 1.3.6.1.4.1.6527.3.1.2.16.3.3
a list of all DSCP entries for all sap-ingress policies.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TSapIngressDSCPEntry

tSapIngressDSCPEntry 1.3.6.1.4.1.6527.3.1.2.16.3.3.1
Information about a particular DSCP entry for a sap-ingress policy. Entries are created by user. Entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile. in the event that one policy has multiple entries, and the tSapIngressDSCP values are the same, only one queue will be created (the queue for the lexicographically first tSapIngressDSCP).
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapIngressDSCPEntry  

tSapIngressDSCP 1.3.6.1.4.1.6527.3.1.2.16.3.3.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  TDSCPName  

tSapIngressDSCPRowStatus 1.3.6.1.4.1.6527.3.1.2.16.3.3.1.2
This object allows creation/deletion of rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tSapIngressDSCPFC 1.3.6.1.4.1.6527.3.1.2.16.3.3.1.3
tSapIngressDSCPFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific DSCP i.e. tSapIngressDSCP. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressDSCPFC is specified explicitly, this match will be ignored for classification purposes.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tSapIngressDSCPPriority 1.3.6.1.4.1.6527.3.1.2.16.3.3.1.4
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  TPriorityOrDefault  

tSapIngressDSCPLastChanged 1.3.6.1.4.1.6527.3.1.2.16.3.3.1.5
timestamp of last change to this row in tSapIngressDSCPTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapIngressDSCPHsmdaCntrOvr 1.3.6.1.4.1.6527.3.1.2.16.3.3.1.6
The value of the object tSapIngressDSCPHsmdaCntrOvr specifies the counter to use for all the traffic that matches the specific DSCP i.e. tSapIngressDSCP. A value of zero implies that the default counters should be used. This object is obsoleted in 10.0 Release.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TIngressHsmdaCounterIdOrZero  

tSapIngressDot1pTable 1.3.6.1.4.1.6527.3.1.2.16.3.4
a list of all dot1p entries for all sap-ingress policies.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TSapIngressDot1pEntry

tSapIngressDot1pEntry 1.3.6.1.4.1.6527.3.1.2.16.3.4.1
Information about a particular dot1p match for a sap-ingress policy. Entries are created by user. Entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapIngressDot1pEntry  

tSapIngressDot1pValue 1.3.6.1.4.1.6527.3.1.2.16.3.4.1.1
dot1p value to match in the packet. this value is also used as an index so that for any dot1p value there is only one possible disposition queue and priority.
Status: current Access: not-accessible
OBJECT-TYPE    
  Dot1PPriority 0..7  

tSapIngressDot1pRowStatus 1.3.6.1.4.1.6527.3.1.2.16.3.4.1.2
Row Status for this sap-ingress policy's dot1p entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tSapIngressDot1pFC 1.3.6.1.4.1.6527.3.1.2.16.3.4.1.3
tSapIngressDot1pFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific Dot1p i.e. tSapIngressDot1pValue. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressDot1pFC is specified explicitly, this match will be ignored for classification purposes.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tSapIngressDot1pPriority 1.3.6.1.4.1.6527.3.1.2.16.3.4.1.4
priority to use for packets that match the dot1p value tSapIngressDot1pValue.
Status: current Access: read-create
OBJECT-TYPE    
  TPriorityOrDefault  

tSapIngressDot1pLastChanged 1.3.6.1.4.1.6527.3.1.2.16.3.4.1.5
timestamp of last change to this row in tSapIngressDot1pTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapIngressDot1pHsmdaCntrOvr 1.3.6.1.4.1.6527.3.1.2.16.3.4.1.6
The value of the object tSapIngressDot1pHsmdaCntrOvr specifies the counter to use for all the traffic that matches the specific Dot1p i.e. tSapIngressDot1pValue. A value of zero implies that the default counters should be used. This object is obsoleted in 10.0 Release.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TIngressHsmdaCounterIdOrZero  

tSapIngressIPCriteriaTable 1.3.6.1.4.1.6527.3.1.2.16.3.5
information about all sap-ingress policies' ip-criteria entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TSapIngressIPCriteriaEntry

tSapIngressIPCriteriaEntry 1.3.6.1.4.1.6527.3.1.2.16.3.5.1
Information about a particular ip-criteria entry for a sap-ingress policy. Entries are created by user. Entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapIngressIPCriteriaEntry  

tSapIngressIPCriteriaIndex 1.3.6.1.4.1.6527.3.1.2.16.3.5.1.1
unique identifier separates this entry from others in this policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  TEntryId  

tSapIngressIPCriteriaRowStatus 1.3.6.1.4.1.6527.3.1.2.16.3.5.1.2
Row Status for the IP Criteria entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tSapIngressIPCriteriaDescription 1.3.6.1.4.1.6527.3.1.2.16.3.5.1.3
description of this IP criteria entry.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tSapIngressIPCriteriaActionFC 1.3.6.1.4.1.6527.3.1.2.16.3.5.1.4
tSapIngressIPCriteriaActionFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific IP criteria. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressIPCriteriaActionFC is specified explicitly, this match will be ignored for classification purposes.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tSapIngressIPCriteriaActionPriority 1.3.6.1.4.1.6527.3.1.2.16.3.5.1.5
priority for packets which match this entry's criteria. when set to default, the packet is sent to the queue from DSCP/dot1p/FC which matched the packet, using the priority from the DSCP/dot1p/FC which matched the packet.
Status: current Access: read-create
OBJECT-TYPE    
  TPriorityOrDefault  

tSapIngressIPCriteriaSourceIpAddr 1.3.6.1.4.1.6527.3.1.2.16.3.5.1.6
IP address to match with source-IP of the packet.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

tSapIngressIPCriteriaSourceIpMask 1.3.6.1.4.1.6527.3.1.2.16.3.5.1.7
the prefix is the number of bits of the source IP address to match.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddressPrefixLength  

tSapIngressIPCriteriaDestIpAddr 1.3.6.1.4.1.6527.3.1.2.16.3.5.1.8
IP address to match with destination-IP of the packet.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

tSapIngressIPCriteriaDestIpMask 1.3.6.1.4.1.6527.3.1.2.16.3.5.1.9
the prefix is the number of bits of the destination IP address to match.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddressPrefixLength  

tSapIngressIPCriteriaProtocol 1.3.6.1.4.1.6527.3.1.2.16.3.5.1.10
IP protocol to match. use -1 to disable matching by IP protocol.
Status: current Access: read-create
OBJECT-TYPE    
  TIpProtocol  

tSapIngressIPCriteriaSourcePortValue1 1.3.6.1.4.1.6527.3.1.2.16.3.5.1.11
TCP/UDP port value1. The value of this object is used according to the description for tSapIngressIPCriteriaSourcePortOperator.
Status: current Access: read-create
OBJECT-TYPE    
  TTcpUdpPort  

tSapIngressIPCriteriaSourcePortValue2 1.3.6.1.4.1.6527.3.1.2.16.3.5.1.12
TCP/UDP port value2. The value of this object is used according to the description for tSapIngressIPCriteriaSourcePortOperator.
Status: current Access: read-create
OBJECT-TYPE    
  TTcpUdpPort  

tSapIngressIPCriteriaSourcePortOperator 1.3.6.1.4.1.6527.3.1.2.16.3.5.1.13
The operator specifies the manner in which tSapIngressIPCriteriaSourcePortValue1 and tSapIngressIPCriteriaSourcePortValue2 are to be used. The value of these latter 2 objects and tSapIngressIPCriteriaSourcePortOperator is used as described in TTcpUdpPortOperator.
Status: current Access: read-create
OBJECT-TYPE    
  TTcpUdpPortOperator  

tSapIngressIPCriteriaDestPortValue1 1.3.6.1.4.1.6527.3.1.2.16.3.5.1.14
TCP/UDP port value1. The value of this object is used according to the description for tSapIngressIPCriteriaDestPortOperator.
Status: current Access: read-create
OBJECT-TYPE    
  TTcpUdpPort  

tSapIngressIPCriteriaDestPortValue2 1.3.6.1.4.1.6527.3.1.2.16.3.5.1.15
TCP/UDP port value2. The value of this object is used according to the description for tSapIngressIPCriteriaDestPortOperator.
Status: current Access: read-create
OBJECT-TYPE    
  TTcpUdpPort  

tSapIngressIPCriteriaDestPortOperator 1.3.6.1.4.1.6527.3.1.2.16.3.5.1.16
The operator specifies the manner in which tSapIngressIPCriteriaDestPortValue1 and tSapIngressIPCriteriaDestPortValue2 are to be used. The value of these latter 2 objects and tSapIngressIPCriteriaDestPortOperator is used as described in TTcpUdpPortOperator.
Status: current Access: read-create
OBJECT-TYPE    
  TTcpUdpPortOperator  

tSapIngressIPCriteriaDSCP 1.3.6.1.4.1.6527.3.1.2.16.3.5.1.17
DSCP value to match in the packet
Status: current Access: read-create
OBJECT-TYPE    
  TDSCPNameOrEmpty  

tSapIngressIPCriteriaFragment 1.3.6.1.4.1.6527.3.1.2.16.3.5.1.19
matches when the packet is a fragment (true) or when the packet is not a fragment (false) or matches all packets fragmented or not (off).
Status: current Access: read-create
OBJECT-TYPE    
  TItemMatch  

tSapIngressIPCriteriaLastChanged 1.3.6.1.4.1.6527.3.1.2.16.3.5.1.20
timestamp of last change to this row in tSapIngressIPCriteriaTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapIngressIPCritHsmdaCntrOvr 1.3.6.1.4.1.6527.3.1.2.16.3.5.1.21
The value of the object tSapIngressIPCritHsmdaCntrOvr specifies the Hsmda counter to use for matching packets. This value will be ignored when the sap-ingress policy specified by tSapIngressIndex, is applied to a SAP on a non-Hsmda MDA type. A value of zero implies that the default counters should be used. This object is obsoleted in 10.0 Release.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TIngressHsmdaCounterIdOrZero  

tSapIngressIPCriteriaIpPrecValue 1.3.6.1.4.1.6527.3.1.2.16.3.5.1.31
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  Dot1PPriority  

tSapIngressIPCriteriaIpPrecMask 1.3.6.1.4.1.6527.3.1.2.16.3.5.1.32
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  Dot1PPriority 0..7  

tSapIngressMacCriteriaTable 1.3.6.1.4.1.6527.3.1.2.16.3.6
information about all sap-ingress policies' mac-criteria entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TSapIngressMacCriteriaEntry

tSapIngressMacCriteriaEntry 1.3.6.1.4.1.6527.3.1.2.16.3.6.1
Information about a particular mac-criteria entry for a sap-ingress policy. Entries are created by user. Entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapIngressMacCriteriaEntry  

tSapIngressMacCriteriaIndex 1.3.6.1.4.1.6527.3.1.2.16.3.6.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  TEntryId  

tSapIngressMacCriteriaRowStatus 1.3.6.1.4.1.6527.3.1.2.16.3.6.1.2
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tSapIngressMacCriteriaDescription 1.3.6.1.4.1.6527.3.1.2.16.3.6.1.3
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tSapIngressMacCriteriaActionFC 1.3.6.1.4.1.6527.3.1.2.16.3.6.1.4
tSapIngressMacCriteriaActionFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific Mac criteria. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressMacCriteriaActionFC is specified explicitly, this match will be ignored for classification purposes.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tSapIngressMacCriteriaActionPriority 1.3.6.1.4.1.6527.3.1.2.16.3.6.1.5
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  TPriorityOrDefault  

tSapIngressMacCriteriaFrameType 1.3.6.1.4.1.6527.3.1.2.16.3.6.1.6
The type of mac frame for which we are defining this match criteria.
Status: current Access: read-create
OBJECT-TYPE    
  TFrameType  

tSapIngressMacCriteriaSrcMacAddr 1.3.6.1.4.1.6527.3.1.2.16.3.6.1.8
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

tSapIngressMacCriteriaSrcMacMask 1.3.6.1.4.1.6527.3.1.2.16.3.6.1.9
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

tSapIngressMacCriteriaDstMacAddr 1.3.6.1.4.1.6527.3.1.2.16.3.6.1.10
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

tSapIngressMacCriteriaDstMacMask 1.3.6.1.4.1.6527.3.1.2.16.3.6.1.11
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

tSapIngressMacCriteriaDot1PValue 1.3.6.1.4.1.6527.3.1.2.16.3.6.1.12
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  Dot1PPriority  

tSapIngressMacCriteriaDot1PMask 1.3.6.1.4.1.6527.3.1.2.16.3.6.1.13
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  Dot1PPriority 0..7  

tSapIngressMacCriteriaEthernetType 1.3.6.1.4.1.6527.3.1.2.16.3.6.1.14
the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1 | 1536..65535  

tSapIngressMacCriteriaDSAP 1.3.6.1.4.1.6527.3.1.2.16.3.6.1.15
the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry.
Status: current Access: read-create
OBJECT-TYPE    
  ServiceAccessPoint  

tSapIngressMacCriteriaDSAPMask 1.3.6.1.4.1.6527.3.1.2.16.3.6.1.16
the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry.
Status: current Access: read-create
OBJECT-TYPE    
  ServiceAccessPoint  

tSapIngressMacCriteriaSSAP 1.3.6.1.4.1.6527.3.1.2.16.3.6.1.17
the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry.
Status: current Access: read-create
OBJECT-TYPE    
  ServiceAccessPoint  

tSapIngressMacCriteriaSSAPMask 1.3.6.1.4.1.6527.3.1.2.16.3.6.1.18
the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry.
Status: current Access: read-create
OBJECT-TYPE    
  ServiceAccessPoint  

tSapIngressMacCriteriaSnapPid 1.3.6.1.4.1.6527.3.1.2.16.3.6.1.19
the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1 | 0..65535  

tSapIngressMacCriteriaSnapOui 1.3.6.1.4.1.6527.3.1.2.16.3.6.1.20
whether to match snap-oui, and what to match.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER off(1), zero(2), nonZero(3)  

tSapIngressMacCriteriaLastChanged 1.3.6.1.4.1.6527.3.1.2.16.3.6.1.21
timestamp of last change to this row in tSapIngressMacCriteriaTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapIngressMacCriteriaAtmVci 1.3.6.1.4.1.6527.3.1.2.16.3.6.1.22
The value of tSapIngressMacCriteriaAtmVci specifies ATM VC Identifier to match as part of the MAC criteria for this SAP on the ingress. An inconsistentValue error is returned if this object is set when tSapIngressMacCriteriaFrameType is not set to 'atm'.
Status: current Access: read-create
OBJECT-TYPE    
  AtmVcIdentifier  

tSapIngressMacCritInnerTagValue 1.3.6.1.4.1.6527.3.1.2.16.3.6.1.23
The value of tSapIngressMacCritInnerTagValue specifies the value to match against the VID of the second VLAN tag in the packet that is carried transparently through the service (the second vlan tag after the service delimiting tags). This object can only be set if tSapIngressMacCritType is set to 'vid(3)'. The (default) value of '-1' indicates no VLAN tag matching will be performed.
Status: current Access: read-create
OBJECT-TYPE    
  QTagFullRangeOrNone  

tSapIngressMacCritInnerTagMask 1.3.6.1.4.1.6527.3.1.2.16.3.6.1.24
The value of tSapIngressMacCritInnerTagMask is applied as a mask to VID of the inner VLAN tag of the packet prior to comparing it with tSapIngressMacCritInnerTagValue. The inner tag is the second tag in the packet that is carried transparently through the service (the second tag after the service delimiting tags). This object can only be set if tSapIngressMacCritType is set to 'vid(3)'.
Status: current Access: read-create
OBJECT-TYPE    
  QTagFullRange 1..4095  

tSapIngressMacCritOuterTagValue 1.3.6.1.4.1.6527.3.1.2.16.3.6.1.25
The value of tSapIngressMacCritOuterTagValue specifies the value to match against the VID of the first VLAN tag in the packet that is carried transparently through the service (the first vlan tag after the service delimiting tags). This object can only be set if tSapIngressMacCritType is set to 'vid(3)'. The (default) value of '-1' indicates no outer VLAN tag matching will be performed.
Status: current Access: read-create
OBJECT-TYPE    
  QTagFullRangeOrNone  

tSapIngressMacCritOuterTagMask 1.3.6.1.4.1.6527.3.1.2.16.3.6.1.26
The value of tSapIngressMacCritOuterTagMask is applied as a mask to VID of the outer VLAN tag of the packet prior to comparing it with tSapIngressMacCritOuterTagValue. The outer tag is the first tag in the packet that is carried transparently through the service (the first tag after the service delimiting tags). This object can only be set if tSapIngressMacCritType is set to 'vid(3)'.
Status: current Access: read-create
OBJECT-TYPE    
  QTagFullRange 1..4095  

tSapIngressFCTable 1.3.6.1.4.1.6527.3.1.2.16.3.7
This table maintains the mapping of a particular forwarding class traffic into the specified queue.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TSapIngressFCEntry

tSapIngressFCEntry 1.3.6.1.4.1.6527.3.1.2.16.3.7.1
Information about a particular sap-ingress policy's forwarding class mappings to queues. Entries are created and deleted by user. They have a presumed StorageType of nonVolatile.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapIngressFCEntry  

tSapIngressFCName 1.3.6.1.4.1.6527.3.1.2.16.3.7.1.1
tSapIngressFCName specifies the forwarding class or the sub forwarding class for which this mapping is defined. A sub forwarding class mapping can also be configured. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] A sub forwarding class mapping should exist in this table if any explicit match criteria in this SAP ingress QoS policy try to use it. However, it is not the same for the base forwarding classes.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

tSapIngressFCRowStatus 1.3.6.1.4.1.6527.3.1.2.16.3.7.1.2
Row Status for this queue.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tSapIngressFCQueue 1.3.6.1.4.1.6527.3.1.2.16.3.7.1.3
The specific queue to be used for packets in this forwarding class. Default value for this object along with default value for tSapIngressFCQGrp implies that the default queues should be used.
Status: current Access: read-create
OBJECT-TYPE    
  TIngressQueueId  

tSapIngressFCMCastQueue 1.3.6.1.4.1.6527.3.1.2.16.3.7.1.4
The specific multicast queue to be used for packets in this forwarding class. The queue is used only for specific entities and will be ignored wherever it is irrelevant. Default value for this object along with default value for tSapIngressFCQGrpMCast implies that the default queues should be used.
Status: current Access: read-create
OBJECT-TYPE    
  TIngressQueueId  

tSapIngressFCBCastQueue 1.3.6.1.4.1.6527.3.1.2.16.3.7.1.5
The specific broadcast queue to be used for packets in this forwarding class. The queue is used only for specific entities and will be ignored wherever it is irrelevant. Default value for this object along with default value for tSapIngressFCQGrpBCast implies that the default queues should be used.
Status: current Access: read-create
OBJECT-TYPE    
  TIngressQueueId  

tSapIngressFCUnknownQueue 1.3.6.1.4.1.6527.3.1.2.16.3.7.1.6
The specific unknown destination queue to be used for packets in this forwarding class. The queue is used only for specific entities and will be ignored wherever it is irrelevant. Default value for this object along with default value for tSapIngressFCQGrpUnknown implies that the default queues should be used.
Status: current Access: read-create
OBJECT-TYPE    
  TIngressQueueId  

tSapIngressFCLastChanged 1.3.6.1.4.1.6527.3.1.2.16.3.7.1.7
tSapIngressFCLastChanged indicates the value of sysUpTime when the forwarding class entry was last modified.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapIngressFCInProfRemark 1.3.6.1.4.1.6527.3.1.2.16.3.7.1.8
tSapIngressFCInProfRemark specifies the remarking type to be used for the in profile packets feeding into the queues.
Status: current Access: read-create
OBJECT-TYPE    
  TRemarkType  

tSapIngressFCInProfDscp 1.3.6.1.4.1.6527.3.1.2.16.3.7.1.9
tSapIngressFCInProfDscp specifies the DSCP to be used while remarking the in profile packets when the in-profile remarking type, tSapIngressFCInProfRemark is specified to be 'dscp'.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tSapIngressFCInProfPrec 1.3.6.1.4.1.6527.3.1.2.16.3.7.1.10
tSapIngressFCInProfPrec specifies the precedence value to be used while remarking the in profile packets when the in-profile remarking type, tSapIngressFCInProfRemark is specified to be 'precedence'.
Status: current Access: read-create
OBJECT-TYPE    
  TPrecValueOrNone  

tSapIngressFCOutProfRemark 1.3.6.1.4.1.6527.3.1.2.16.3.7.1.11
tSapIngressFCOutProfRemark specifies the remarking type to be used for the in profile packets feeding into the queues.
Status: current Access: read-create
OBJECT-TYPE    
  TRemarkType  

tSapIngressFCOutProfDscp 1.3.6.1.4.1.6527.3.1.2.16.3.7.1.12
tSapIngressFCOutProfDscp specifies the DSCP to be used while remarking the in profile packets when the in-profile remarking type, tSapIngressFCOutProfRemark is specified to be 'dscp'.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tSapIngressFCOutProfPrec 1.3.6.1.4.1.6527.3.1.2.16.3.7.1.13
tSapIngressFCOutProfPrec specifies the precedence value to be used while remarking the in profile packets when the in-profile remarking type, tSapIngressFCOutProfRemark is specified to be 'precedence'.
Status: current Access: read-create
OBJECT-TYPE    
  TPrecValueOrNone  

tSapIngressFCProfile 1.3.6.1.4.1.6527.3.1.2.16.3.7.1.14
tSapIngressFCProfile specifies the profile of the packets associated with this forwarding class. This object can not be set to anything but 'none' if the queues being used by this mapping do not have their modes, tSapIngressQueueMode set to 'profile'.
Status: current Access: read-create
OBJECT-TYPE    
  TProfileOrNone  

tSapIngressFCHsmdaQueue 1.3.6.1.4.1.6527.3.1.2.16.3.7.1.15
The value of the object tSapIngressFCHsmdaQueue specifies the HSMDA queue to use for packets in this forwarding class. This mapping will be used when the SAP is on a HSMDA MDA. A value of zero implies that the default queues should be used. This object is obsoleted in 10.0 Release.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TIngressHsmdaQueueId  

tSapIngressFCHsmdaMCastQueue 1.3.6.1.4.1.6527.3.1.2.16.3.7.1.16
The value of the object tSapIngressFCHsmdaMCastQueue specifies the multicast queue to use for packets in this forwarding class. This mapping will be used when the SAP is on a HSMDA MDA. A value of zero implies that the default queues should be used. This object is obsoleted in 10.0 Release.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TIngressHsmdaQueueId  

tSapIngressFCHsmdaBCastQueue 1.3.6.1.4.1.6527.3.1.2.16.3.7.1.17
The value of the object tSapIngressFCHsmdaBCastQueue specifies the broadcast queue to use for packets in this forwarding class. This mapping will be used when the SAP is on a HSMDA MDA. A value of zero implies that the default queues should be used. This object is obsoleted in 10.0 Release.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TIngressHsmdaQueueId  

tSapIngressFCDE1OutOfProfile 1.3.6.1.4.1.6527.3.1.2.16.3.7.1.18
The value of tSapIngressFCDE1OutOfProfile specifies whether frames with DE value of '1' are to be treated as out-of-profile (as if tSapIngressFCProfile was set to 'out'). When tSapIngressFCDE1OutOfProfile is set to 'true', frames with DE value of '1' are autmatically classified as out-of-profile. Frames with DE value of '0' will continue to be policed based on the value of tSapIngressQueueAdminCIR. That is, if the dynamic rate of ingress queue is within CIR, frames with DE=0 will be treated as in-profile (as if tSapIngressFCProfile was set to 'in') otherwise these frames are treated as out-of-profile. When tSapIngressFCDE1OutOfProfile is set to 'true', it supercedes action specified by the value of tSapIngressFCProfile.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tSapIngressFCQGrp 1.3.6.1.4.1.6527.3.1.2.16.3.7.1.19
tSapIngressFCQGrp specifies the tQosIngQGroupName. This object must be set along with tSapIngressFCQueue object. An 'inconsistentValue' error is returned if this object is set to the default and other is set to a non-default value.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tSapIngressFCQGrpMCast 1.3.6.1.4.1.6527.3.1.2.16.3.7.1.20
tSapIngressFCQGrpMCast specifies the tQosIngQGroupName. This object must be set along with tSapIngressFCMCastQueue object. An 'inconsistentValue' error is returned if this object is set to the default and other is set to a non-default value.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tSapIngressFCQGrpBCast 1.3.6.1.4.1.6527.3.1.2.16.3.7.1.21
tSapIngressFCQGrpBCast specifies the tQosIngQGroupName. This object must be set along with tSapIngressFCBCastQueue object. An 'inconsistentValue' error is returned if this object is set to the default and other is set to a non-default value.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tSapIngressFCQGrpUnknown 1.3.6.1.4.1.6527.3.1.2.16.3.7.1.22
tSapIngressFCQGrpUnknown specifies the tQosIngQGroupName. This object must be set along with tSapIngressFCUnknownQueue object. An 'inconsistentValue' error is returned if this object is set to the default and other is set to a non-default value.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tSapIngressFCPolicer 1.3.6.1.4.1.6527.3.1.2.16.3.7.1.23
tSapIngressFCPolicer specifies the policer ID to be used for the normal traffic in this forwarding class.
Status: current Access: read-create
OBJECT-TYPE    
  TIngPolicerIdOrNone  

tSapIngressFCMCastPolicer 1.3.6.1.4.1.6527.3.1.2.16.3.7.1.24
tSapIngressFCMCastPolicer specifies the policer ID to be used for multicast in this forwarding class.
Status: current Access: read-create
OBJECT-TYPE    
  TIngPolicerIdOrNone  

tSapIngressFCBCastPolicer 1.3.6.1.4.1.6527.3.1.2.16.3.7.1.25
tSapIngressFCBCastPolicer specifies the policer ID to be used for broadcast traffic in this forwarding class.
Status: current Access: read-create
OBJECT-TYPE    
  TIngPolicerIdOrNone  

tSapIngressFCUnknownPolicer 1.3.6.1.4.1.6527.3.1.2.16.3.7.1.26
tSapIngressFCUnknownPolicer specifies the policer ID to be used for unknown traffic in this forwarding class.
Status: current Access: read-create
OBJECT-TYPE    
  TIngPolicerIdOrNone  

tSapIngressFCPlcrFPQGrp 1.3.6.1.4.1.6527.3.1.2.16.3.7.1.27
The value of tSapIngressFCPlcrFPQGrp specifies whether to use the specified policer defined in FP(forwading-plane) Queue group for this SAP. When tSapIngressFCPlcrFPQGrp is set to 'true', it specifies the FC to use the specific policer defined in the FP Queue Group instance attached to the SAP specified by sapIngressFPQGrp and sapIngressFPQGrpInstanceId. An 'inconsistentValue' error is returned if tSapIngressFCPlcrFPQGrp is set to a non-default value and an entry corresponding to the policer tSapIngressFCPolicer does not exist in Queue group attached at the FP.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tSapIngressFCMCastPlcrFPQGrp 1.3.6.1.4.1.6527.3.1.2.16.3.7.1.28
The value of tSapIngressFCMCastPlcrFPQGrp specifies whether to use the specified multicast policer defined in FP(forwading-plane) Queue group for this SAP. When tSapIngressFCMCastPlcrFPQGrp is set to 'true', it specifies the FC to use the specific multicast policer defined in the FP Queue Group instance attached to the SAP specified by sapIngressFPQGrp and sapIngressFPQGrpInstanceId. An 'inconsistentValue' error is returned if tSapIngressFCMCastPlcrFPQGrp is set to a non-default value and an entry corresponding to the policer tSapIngressFCPolicer does not exist in Queue group attached at the FP.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tSapIngressFCBCastPlcrFPQGrp 1.3.6.1.4.1.6527.3.1.2.16.3.7.1.29
The value of tSapIngressFCBCastPlcrFPQGrp specifies whether to use the specified broadcast policer defined in FP(forwading-plane) Queue group for this SAP. When tSapIngressFCBCastPlcrFPQGrp is set to 'true', it specifies the FC to use the specific broadcast policer defined in the FP Queue Group instance attached to the SAP specified by sapIngressFPQGrp and sapIngressFPQGrpInstanceId. An 'inconsistentValue' error is returned if tSapIngressFCBCastPlcrFPQGrp is set to a non-default value and an entry corresponding to the policer tSapIngressFCPolicer does not exist in Queue group attached at the FP.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tSapIngressFCUnknownPlcrFPQGrp 1.3.6.1.4.1.6527.3.1.2.16.3.7.1.30
The value of tSapIngressFCUnknownPlcrFPQGrp specifies whether to use the specified unknown policer defined in FP(forwading-plane) Queue group for this SAP. When tSapIngressFCUnknownPlcrFPQGrp is set to 'true', it specifies the FC to use the specific broadcast policer defined in the FP Queue Group instance attached to the SAP specified by sapIngressFPQGrp and sapIngressFPQGrpInstanceId. An 'inconsistentValue' error is returned if tSapIngressFCUnknownPlcrFPQGrp is set to a non-default value and an entry corresponding to the policer tSapIngressFCPolicer does not exist in Queue group attached at the FP.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tSapIngressPrecTable 1.3.6.1.4.1.6527.3.1.2.16.3.8
This table maintains the mapping of a particular precedence value into a forwarding class
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TSapIngressPrecEntry

tSapIngressPrecEntry 1.3.6.1.4.1.6527.3.1.2.16.3.8.1
Information about a particular sap-ingress policy's IP precedence values to forwarding class mappings. Entries are created and deleted by user. They have a presumed StorageType of nonVolatile.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapIngressPrecEntry  

tSapIngressPrecValue 1.3.6.1.4.1.6527.3.1.2.16.3.8.1.1
Precedence value for which the mapping is done.
Status: current Access: not-accessible
OBJECT-TYPE    
  TPrecValue  

tSapIngressPrecRowStatus 1.3.6.1.4.1.6527.3.1.2.16.3.8.1.2
Row Status for this mapping.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tSapIngressPrecFC 1.3.6.1.4.1.6527.3.1.2.16.3.8.1.3
tSapIngressPrecFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific precedence value i.e. tSapIngressPrecValue. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressPrecFC is specified explicitly, this match will be ignored for classification purposes.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tSapIngressPrecFCPriority 1.3.6.1.4.1.6527.3.1.2.16.3.8.1.4
The priority to be assigned to the matching traffic.
Status: current Access: read-create
OBJECT-TYPE    
  TPriorityOrDefault  

tSapIngressPrecLastChanged 1.3.6.1.4.1.6527.3.1.2.16.3.8.1.5
timestamp of last change to this row in tSapIngressPrecTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapIngressPrecHsmdaCntrOvr 1.3.6.1.4.1.6527.3.1.2.16.3.8.1.6
The value of the object tSapIngressPrecHsmdaCntrOvr specifies the counter to use for all the traffic that matches the specific precedence value i.e. tSapIngressPrecValue. A value of zero implies that the default counters should be used. This object is obsoleted in 10.0 Release.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TIngressHsmdaCounterIdOrZero  

tSapIngressIPv6CriteriaTable 1.3.6.1.4.1.6527.3.1.2.16.3.9
Information about all sap-ingress policies' ipv6-criteria entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TSapIngressIPv6CriteriaEntry

tSapIngressIPv6CriteriaEntry 1.3.6.1.4.1.6527.3.1.2.16.3.9.1
Information about a particular ipv6-criteria entry for a sap-ingress policy. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapIngressIPv6CriteriaEntry  

tSapIngressIPv6CriteriaIndex 1.3.6.1.4.1.6527.3.1.2.16.3.9.1.1
The value of the object tSapIngressIPv6CriteriaIndex specifies uniquely each entry in the policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  TEntryId  

tSapIngressIPv6CriteriaRowStatus 1.3.6.1.4.1.6527.3.1.2.16.3.9.1.2
The value of the object tSapIngressIPv6CriteriaRowStatus specifies the Row Status for the IPv6 Criteria entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tSapIngressIPv6CriteriaDescription 1.3.6.1.4.1.6527.3.1.2.16.3.9.1.3
The value of the object tSapIngressIPv6CriteriaDescription specifies an optional user provided description of this IPv6 criteria entry.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tSapIngressIPv6CriteriaActionFC 1.3.6.1.4.1.6527.3.1.2.16.3.9.1.4
The value of the object tSapIngressIPv6CriteriaActionFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific IPv6 criteria. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressIPv6CriteriaActionFC is specified explicitly, this match will be ignored for classification purposes.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tSapIngressIPv6CriteriaActionPriority 1.3.6.1.4.1.6527.3.1.2.16.3.9.1.5
The value of the object tSapIngressIPv6CriteriaActionPriority specifies the priority for packets which match this entry's criteria. When set to 'default', the packet is sent to the queue from DSCP/dot1p/FC which matched the packet, using the priority from the DSCP/dot1p/FC which matched the packet.
Status: current Access: read-create
OBJECT-TYPE    
  TPriorityOrDefault  

tSapIngressIPv6CriteriaSourceIpAddr 1.3.6.1.4.1.6527.3.1.2.16.3.9.1.6
The value of the object tSapIngressIPv6CriteriaSourceIpAddr specifies the IPv6 address to match with source-IPv6 of the packet.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressIPv6  

tSapIngressIPv6CriteriaSourceIpMask 1.3.6.1.4.1.6527.3.1.2.16.3.9.1.7
The value of the object tSapIngressIPv6CriteriaSourceIpMask specifies the prefix is the number of bits of the source IPv6 address to match.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressPrefixLength 0..128  

tSapIngressIPv6CriteriaDestIpAddr 1.3.6.1.4.1.6527.3.1.2.16.3.9.1.8
The value of the object tSapIngressIPv6CriteriaDestIpAddr specifies the IPv6 address to match with destination-IPv6 of the packet.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressIPv6  

tSapIngressIPv6CriteriaDestIpMask 1.3.6.1.4.1.6527.3.1.2.16.3.9.1.9
The value of the object tSapIngressIPv6CriteriaDestIpMask specifies the prefix is the number of bits of the destination IPv6 address to match.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressPrefixLength 0..128  

tSapIngressIPv6CriteriaNextHeader 1.3.6.1.4.1.6527.3.1.2.16.3.9.1.10
The value of the object tSapIngressIPv6CriteriaNextHeader specifies the Next Header to match. use -1 to disable matching by Next Header. Because the match criteria only pertains to the last next-header, the following values are not accepted: 0, 43, 44, 50, 51, and 60.
Status: current Access: read-create
OBJECT-TYPE    
  TIpProtocol  

tSapIngressIPv6CriteriaSourcePortValue1 1.3.6.1.4.1.6527.3.1.2.16.3.9.1.11
The value of the object tSapIngressIPv6CriteriaSourcePortValue1 specifies the TCP/UDP port value1. The value of this object is used according to the description for tSapIngressIPv6CriteriaSourcePortOperator.
Status: current Access: read-create
OBJECT-TYPE    
  TTcpUdpPort  

tSapIngressIPv6CriteriaSourcePortValue2 1.3.6.1.4.1.6527.3.1.2.16.3.9.1.12
The value of the object tSapIngressIPv6CriteriaSourcePortValue2 specifies TCP/UDP port value2. The value of this object is used according to the description for tSapIngressIPv6CriteriaSourcePortOperator.
Status: current Access: read-create
OBJECT-TYPE    
  TTcpUdpPort  

tSapIngressIPv6CriteriaSourcePortOperator 1.3.6.1.4.1.6527.3.1.2.16.3.9.1.13
The value of the object tSapIngressIPv6CriteriaSourcePortOperator specifies The operator specifies the manner in which tSapIngressIPv6CriteriaSourcePortValue1 and tSapIngressIPv6CriteriaSourcePortValue2 are to be used.
Status: current Access: read-create
OBJECT-TYPE    
  TTcpUdpPortOperator  

tSapIngressIPv6CriteriaDestPortValue1 1.3.6.1.4.1.6527.3.1.2.16.3.9.1.14
The value of the object tSapIngressIPv6CriteriaDestPortValue1 specifies the TCP/UDP port value1. The value of this object is used according to the description for tSapIngressIPv6CriteriaDestPortOperator.
Status: current Access: read-create
OBJECT-TYPE    
  TTcpUdpPort  

tSapIngressIPv6CriteriaDestPortValue2 1.3.6.1.4.1.6527.3.1.2.16.3.9.1.15
The value of the object tSapIngressIPv6CriteriaDestPortValue2 specifies the TCP/UDP port value2. The value of this object is used according to the description for tSapIngressIPv6CriteriaDestPortOperator.
Status: current Access: read-create
OBJECT-TYPE    
  TTcpUdpPort  

tSapIngressIPv6CriteriaDestPortOperator 1.3.6.1.4.1.6527.3.1.2.16.3.9.1.16
The value of the object tSapIngressIPv6CriteriaDestPortOperator specifies the manner in which tSapIngressIPv6CriteriaDestPortValue1 and tSapIngressIPv6CriteriaDestPortValue2 are to be used.
Status: current Access: read-create
OBJECT-TYPE    
  TTcpUdpPortOperator  

tSapIngressIPv6CriteriaDSCP 1.3.6.1.4.1.6527.3.1.2.16.3.9.1.17
The value of the object tSapIngressIPv6CriteriaDSCP specifies the DSCP value to match in the packet
Status: current Access: read-create
OBJECT-TYPE    
  TDSCPNameOrEmpty  

tSapIngressIPv6CriteriaLastChanged 1.3.6.1.4.1.6527.3.1.2.16.3.9.1.20
The value of the object indicates timestamp of last change to this row in tSapIngressIPv6CriteriaTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapIngressIPv6CriteriaIpPrecValue 1.3.6.1.4.1.6527.3.1.2.16.3.9.1.31
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  Dot1PPriority  

tSapIngressIPv6CriteriaIpPrecMask 1.3.6.1.4.1.6527.3.1.2.16.3.9.1.32
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  Dot1PPriority 0..7  

tSapIngressHsmdaQueueTable 1.3.6.1.4.1.6527.3.1.2.16.3.10
Information about all sap-ingress policies' HSMDA queues. This table is obsoleted in 10.0 release.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TSapIngressHsmdaQueueEntry

tSapIngressHsmdaQueueEntry 1.3.6.1.4.1.6527.3.1.2.16.3.10.1
Information about a particular HSMDA queue for a sap-ingress policy. Entries are created by user.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  TSapIngressHsmdaQueueEntry  

tSapIngressHsmdaQueue 1.3.6.1.4.1.6527.3.1.2.16.3.10.1.1
The HSMDA queue ID is used as the secondary index to the table entry.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  TIngressHsmdaQueueId 1..8  

tSapIngressHsmdaQueueRowStatus 1.3.6.1.4.1.6527.3.1.2.16.3.10.1.2
The value of tSapIngressHsmdaQueueRowStatus is used for the creation and deletion of entries in the tSapIngressHsmdaQueueTable.
Status: obsolete Access: read-create
OBJECT-TYPE    
  RowStatus  

tSapIngressHsmdaQueueLastChanged 1.3.6.1.4.1.6527.3.1.2.16.3.10.1.3
The value of tSapIngressHsmdaQueueLastChanged indicates the timestamp of last change to this row in tSapIngressHsmdaQueueTable.
Status: obsolete Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapIngressHsmdaQueueCIRAdaptn 1.3.6.1.4.1.6527.3.1.2.16.3.10.1.4
The value of tSapIngressHsmdaQueueCIRAdaptn specifies the adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TAdaptationRule  

tSapIngressHsmdaQueuePIRAdaptn 1.3.6.1.4.1.6527.3.1.2.16.3.10.1.5
The value of tSapIngressHsmdaQueuePIRAdaptn specifies the adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TAdaptationRule  

tSapIngressHsmdaQueueAdminPIR 1.3.6.1.4.1.6527.3.1.2.16.3.10.1.6
The value of tSapIngressHsmdaQueueAdminPIR specifies the administrative PIR specified by the user.
Status: obsolete Access: read-create
OBJECT-TYPE    
  THsmdaPIRKRate  

tSapIngressHsmdaQueueAdminCIR 1.3.6.1.4.1.6527.3.1.2.16.3.10.1.7
The value of tSapIngressHsmdaQueueAdminCIR specifies the administrative CIR specified by the user.
Status: obsolete Access: read-create
OBJECT-TYPE    
  THsmdaCIRKRate  

tSapIngressHsmdaQueueSlopePolicy 1.3.6.1.4.1.6527.3.1.2.16.3.10.1.8
The value of tSapIngressHsmdaQueueSlopePolicy specifies the slope policy specified by the user.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TNamedItem  

tSapIngressHsmdaQueuePoliced 1.3.6.1.4.1.6527.3.1.2.16.3.10.1.9
The value of tSapIngressHsmdaQueuePoliced specifies whether the out of profile traffic feeding into the physical queue instance should be dropped. When the value is 'true', out-of-profile packets are discarded. This policing function is different than the shaping function normally performed by the queues defined rate in that scheduling is not stopped for the queue when the rate is exceeded. Accordingly, tSapIngressHsmdaQueuePoliced overrides the bandwidth specified by the object tSapIngressHsmdaQueueAdminCIR.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TruthValue  

tSapIngressLspExpTable 1.3.6.1.4.1.6527.3.1.2.16.3.11
This table maintains the mappings of an Lsp Exp Bit value into a forwarding class
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TSapIngressLspExpEntry

tSapIngressLspExpEntry 1.3.6.1.4.1.6527.3.1.2.16.3.11.1
Information about a particular sap-ingress policy's Lsp Exp Bit values to forwarding class mappings. Entries are created and deleted by user. They have a presumed StorageType of nonVolatile.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapIngressLspExpEntry  

tSapIngressLspExpValue 1.3.6.1.4.1.6527.3.1.2.16.3.11.1.1
The value of the object tSapIngressLspExpValue specifies the value for which the mapping is done.
Status: current Access: not-accessible
OBJECT-TYPE    
  TLspExpValue 0..7  

tSapIngressLspExpRowStatus 1.3.6.1.4.1.6527.3.1.2.16.3.11.1.2
The value of tSapIngressLspExpRowStatus specifies the Row Status for this mapping.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tSapIngressLspExpLastChanged 1.3.6.1.4.1.6527.3.1.2.16.3.11.1.3
The value of tSapIngressLspExpLastChanged indicates the timestamp of last change to this row in tSapIngressLspExpTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapIngressLspExpFC 1.3.6.1.4.1.6527.3.1.2.16.3.11.1.4
The value of the object tSapIngressLspExpFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific Lsp Exp value i.e. tSapIngressLspExpValue. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressLspExpFC is specified explicitly, this match will be ignored for classification purposes.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tSapIngressLspExpFCPriority 1.3.6.1.4.1.6527.3.1.2.16.3.11.1.5
The value of the object tSapIngressLspExpFCPriority specifies the priority to be assigned to the matching traffic.
Status: current Access: read-create
OBJECT-TYPE    
  TPriorityOrDefault  

tSapIngressLspExpHsmdaCntrOvr 1.3.6.1.4.1.6527.3.1.2.16.3.11.1.6
The value of the object tSapIngressPrecHsmdaCntrOvr specifies the counter to use for all the traffic that matches the specific Lsp Exp value i.e. tSapIngressLspExpValue. A value of zero implies that the default counters should be used. This object is obsoleted in 10.0 Release.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TIngressHsmdaCounterIdOrZero  

tSapIngPolicerTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.85
tSapIngPolicerTableLastChanged indicates the timestamp of last change to the tSapIngPolicerTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapIngPolicerTable 1.3.6.1.4.1.6527.3.1.2.16.3.12
tSapIngPolicerTable defines SAP Ingress Policer Table for providing, via SNMP, the capability of defining the policers. tSapIngPolicerTable holds a list of all the policers configured in the managed system. Policers must exist in this table before being referenced by the forwarding class mappings within the queue policy as defined in the tSapIngressFCTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TSapIngPolicerEntry

tSapIngPolicerEntry 1.3.6.1.4.1.6527.3.1.2.16.3.12.1
tSapIngPolicerEntry defines an entry in the tSapIngPolicerTable. Entries are created/deleted in this table by SNMP sets to tSapIngPolicerRowStatus.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapIngPolicerEntry  

tSapIngPolicerId 1.3.6.1.4.1.6527.3.1.2.16.3.12.1.1
tSapIngPolicerId defines the SAP Ingress Policer identifier. It identifies an sap-ingress policer in the managed system.
Status: current Access: not-accessible
OBJECT-TYPE    
  TIngPolicerId  

tSapIngPolicerRowStatus 1.3.6.1.4.1.6527.3.1.2.16.3.12.1.2
tSapIngPolicerRowStatus allows entries to be created and deleted in the tSapIngPolicerTable.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tSapIngPolicerLastChanged 1.3.6.1.4.1.6527.3.1.2.16.3.12.1.3
tSapIngPolicerLastChanged indicates the value of sysUpTime when the entry was last modified.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapIngPolicerDescr 1.3.6.1.4.1.6527.3.1.2.16.3.12.1.4
tSapIngPolicerDescr specifies the description of the policer.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tSapIngPolicerPIRAdaptation 1.3.6.1.4.1.6527.3.1.2.16.3.12.1.5
The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
Status: current Access: read-create
OBJECT-TYPE    
  TAdaptationRule  

tSapIngPolicerCIRAdaptation 1.3.6.1.4.1.6527.3.1.2.16.3.12.1.6
The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
Status: current Access: read-create
OBJECT-TYPE    
  TAdaptationRule  

tSapIngPolicerParent 1.3.6.1.4.1.6527.3.1.2.16.3.12.1.7
tSapIngPolicerParent specifies the scheduler to which this queue would be feeding.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tSapIngPolicerLevel 1.3.6.1.4.1.6527.3.1.2.16.3.12.1.8
tSapIngPolicerLevel specifies the level of priority while feeding the parent.
Status: current Access: read-create
OBJECT-TYPE    
  TLevel  

tSapIngPolicerWeight 1.3.6.1.4.1.6527.3.1.2.16.3.12.1.9
tSapIngPolicerWeight specifies the weight that needs to be used by the scheduler to which this queue would be feeding.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicerWeight  

tSapIngPolicerAdminPIR 1.3.6.1.4.1.6527.3.1.2.16.3.12.1.10
tSapIngPolicerAdminPIR specifies the administrative PIR specified by the user.
Status: current Access: read-create
OBJECT-TYPE    
  THPolPIRRate  

tSapIngPolicerAdminCIR 1.3.6.1.4.1.6527.3.1.2.16.3.12.1.11
tSapIngPolicerAdminCIR specifies the administrative CIR specified by the user.
Status: current Access: read-create
OBJECT-TYPE    
  THPolCIRRate  

tSapIngPolicerStatMode 1.3.6.1.4.1.6527.3.1.2.16.3.12.1.12
tSapIngPolicerStatMode specifies the mode of statistics collected by this policer.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxIngPolicerStatMode  

tSapIngPolicerMBS 1.3.6.1.4.1.6527.3.1.2.16.3.12.1.13
The tSapIngPolicerMBS specifies the high priority 'violate' threshold of PIR leaky bucket of this policer.
Status: current Access: read-create
OBJECT-TYPE    
  TPlcrBurstSizeBytes  

tSapIngPolicerHiPrioOnly 1.3.6.1.4.1.6527.3.1.2.16.3.12.1.14
The tSapIngPolicerHiPrioOnly specifies the percentage of PIR leaky bucket's MBS (maximum burst size) of this policer that is reserved for high priority traffic.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstPercentOrDefault  

tSapIngPolicerCBS 1.3.6.1.4.1.6527.3.1.2.16.3.12.1.15
The tSapIngPolicerCBS specifies the 'exceed' threshold of the CIR leaky bucket of this policer.
Status: current Access: read-create
OBJECT-TYPE    
  TPlcrBurstSizeBytes  

tSapIngPolicerPktOffset 1.3.6.1.4.1.6527.3.1.2.16.3.12.1.16
tSapIngPolicerPktOffset specifies the packet byte offset for addition of policing information by this policer.
Status: current Access: read-create
OBJECT-TYPE    
  TPerPacketOffset  

tSapIngPolicerAdminPIRPercent 1.3.6.1.4.1.6527.3.1.2.16.3.12.1.17
The administrative PIR percentage, in hundredths of a percent. An 'inconsistentValue' error is returned if tSapIngPolicerAdminPIRPercent is set to non-default value when the object tSapIngPolicerRateType is set to 'kbps'.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..10000  

tSapIngPolicerAdminCIRPercent 1.3.6.1.4.1.6527.3.1.2.16.3.12.1.18
The administrative CIR percentage, in hundredths of a percent. An 'inconsistentValue' error is returned if tSapIngPolicerAdminCIRPercent is set to non-default value when the object tSapIngPolicerRateType is set to 'kbps'.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..10000  

tSapIngPolicerRateType 1.3.6.1.4.1.6527.3.1.2.16.3.12.1.19
The value of tSapIngPolicerRateType specifies the type of ingress policer rate. When the value of the object is set to 'kbps', the ingresss policer rates are specified in kbps. The objects tSapIngPolicerAdminPIRPercent and tSapIngPolicerAdminCIRPercent will be set to their default values. When the value of the object is set to 'percentOfLocalLimit', the ingress policer rates are specified in percentage. The objects tSapIngPolicerAdminPIR and tSapIngPolicerAdminCIR will be set to their default values.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicerRateType  

tSapIngPolicerSlopeStartDepth 1.3.6.1.4.1.6527.3.1.2.16.3.12.1.20
The value of tSapIngPolicerSlopeStartDepth specifies the percentage of the buffer utilized after which the drop probability starts to rise above 0.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..10000  

tSapIngPolicerSlopeMaxDepth 1.3.6.1.4.1.6527.3.1.2.16.3.12.1.21
The value of tSapIngPolicerSlopeMaxDepth specifies the percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..10000  

tSapIngPolicerSlopeMaxProb 1.3.6.1.4.1.6527.3.1.2.16.3.12.1.22
The value of tSapIngPolicerSlopeMaxProb specifies the drop probability, as a percentage, when the queue depth reaches tSapIngPolicerSlopeMaxDepth. The drop increases steadily from 0 at the tSapIngPolicerSlopeStartDepth up to the tSapIngPolicerSlopeMaxProb at the tSapIngPolicerSlopeMaxDepth.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..10000  

tSapIngPolicerSlopeMap 1.3.6.1.4.1.6527.3.1.2.16.3.12.1.23
The value of tSapIngPolicerSlopeMap specifies the slope map to be used with this policer.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxSlopeMap  

tSapIngPolicerAdvCfgPolicy 1.3.6.1.4.1.6527.3.1.2.16.3.12.1.24
The value of tSapIngPolicerAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this policer.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tSapIngPolicerProfileCapped 1.3.6.1.4.1.6527.3.1.2.16.3.12.1.25
The value of tSapIngPolicerProfileCapped specifies how the explicit in-profile and undetermined profile traffic should be handled at the ingress policer. When the value of tSapIngPolicerProfileCapped is set to 'true', both explicit in-profile and undetermined profile traffic is honored up to CIR, above which it is marked as out-of-profile. If CIR is set to zero, then all explicit in-profile and undetermined profile packets, along with the explicit out-of-profile packets are marked as out-of-profile. The default behavior when tSapIngPolicerProfileCapped is set to 'false' is to ignore the CIR output state when an explicit in-profile packet is handled by an ingress policer.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tSapIngPolicyNameTableLastChgd 1.3.6.1.4.1.6527.3.1.2.16.20.95
The value of tSapIngPolicyNameTableLastChgd indicates the sysUpTime at the time of the last modification of tSapIngPolicyNameTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapIngPolicyNameTable 1.3.6.1.4.1.6527.3.1.2.16.3.13
A table that contains SAP ingress policy name information. Entries are created automatically by the system when tSapIngressPolicyName object is set for the SAP ingress policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TSapIngPolicyNameEntry

tSapIngPolicyNameEntry 1.3.6.1.4.1.6527.3.1.2.16.3.13.1
Basic information about a specific SAP ingress policy name.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapIngPolicyNameEntry  

tSapIngPolicyNameId 1.3.6.1.4.1.6527.3.1.2.16.3.13.1.1
The value of the object tSapIngPolicyNameId specifies the policy name associated with this SAP ingress policy.
Status: current Access: read-only
OBJECT-TYPE    
  TSapIngressPolicyID  

tSapIngPolicyNameRowStatus 1.3.6.1.4.1.6527.3.1.2.16.3.13.1.2
This value of the object tSapIngPolicyNameRowStatus specifies the status of this row.
Status: current Access: read-only
OBJECT-TYPE    
  RowStatus  

tSapIngPolicyNameLastChanged 1.3.6.1.4.1.6527.3.1.2.16.3.13.1.3
The value of tSapIngPolicyNameLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapEgressTable 1.3.6.1.4.1.6527.3.1.2.16.4.1
information about all sap-egress policies.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TSapEgressEntry

tSapEgressEntry 1.3.6.1.4.1.6527.3.1.2.16.4.1.1
Information about a particular sap-egress policy. Entries are created by user. Entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile. the default sap-egress policy (1) cannot be changed or destroyed.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapEgressEntry  

tSapEgressIndex 1.3.6.1.4.1.6527.3.1.2.16.4.1.1.1
the sap-egress policy ID is used as index for the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapEgressPolicyID  

tSapEgressRowStatus 1.3.6.1.4.1.6527.3.1.2.16.4.1.1.2
Row Status of this policy's entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tSapEgressScope 1.3.6.1.4.1.6527.3.1.2.16.4.1.1.3
scope of the sap-egress policy.
Status: current Access: read-create
OBJECT-TYPE    
  TItemScope  

tSapEgressDescription 1.3.6.1.4.1.6527.3.1.2.16.4.1.1.4
user-supplied description of this sap-egress policy.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tSapEgressLastChanged 1.3.6.1.4.1.6527.3.1.2.16.4.1.1.5
timestamp of last change to this row in tSapEgressTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapEgressHsmdaPacketOffset 1.3.6.1.4.1.6527.3.1.2.16.4.1.1.6
The value of tSapEgressHsmdaPacketOffset specifies the value, in bytes, of the adjustment to make to the size of each packet for HSMDA queue accounting.
Status: current Access: read-create
OBJECT-TYPE    
  TEgressHsmdaPerPacketOffset  

tSapEgressMatchCriteria 1.3.6.1.4.1.6527.3.1.2.16.4.1.1.7
The value of tSapEgressMatchCriteria indicates which type of match criteria the policy should use. When tSapEgressMatchCriteria has a value of 'ip', the sap-egress policy looks for match entries in tSapIngressIPCriteriaTable or tSapIngressIPv6CriteriaTable. The value of tSapIngressMatchCriteria is set when the first match criteria table entry is created. The value of tSapEgressMatchCriteria is set to 'none' when the last criteria table entry is removed.
Status: current Access: read-only
OBJECT-TYPE    
  TMatchCriteria  

tSapEgressHsmdaWrrPolicy 1.3.6.1.4.1.6527.3.1.2.16.4.1.1.8
The value of tSapEgressHsmdaWrrPolicy specifies the HSMDA Weighted Round Robin (WRR) scheduling policy to use.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tSapEgressHsmdaLowBrstMaxCls 1.3.6.1.4.1.6527.3.1.2.16.4.1.1.9
The value of tSapEgressHsmdaLowBrstMaxCls specifies which class should use the low priority burst threshold. All classes starting from 1, up to and including that specified by tSapEgressHsmdaLowBrstMaxCls use the low priority burst threshold. All classes greater than the value of tSapEgressHsmdaLowBrstMaxCls up to and including class 8 use the high priority burst threshold.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..8  

tSapEgressPolicyName 1.3.6.1.4.1.6527.3.1.2.16.4.1.1.10
The value of tSapEgressPolicyName specifies the name to associate with this policy.
Status: current Access: read-create
OBJECT-TYPE    
  TLNamedItemOrEmpty  

tSapEgressEthernetCtag 1.3.6.1.4.1.6527.3.1.2.16.4.1.1.11
The value of tSapEgressEthernetCtag specifies the tag from which the dot1p and DE (Drop-Eligible) values will be drawn to be used by all tSapEgressDot1pEntry objects related to this policy. The value 'true' specifies that the top customer tag will be used for egress reclassification based on dot1p criteria. The value 'false' specifies that a service delimiting tag will be used for egress reclassification based on dot1p criteria.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tSapEgressQueueTable 1.3.6.1.4.1.6527.3.1.2.16.4.2
information about all sap-egress policies' queues.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TSapEgressQueueEntry

tSapEgressQueueEntry 1.3.6.1.4.1.6527.3.1.2.16.4.2.1
Information about a particular sap-egress queue. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapEgressQueueEntry  

tSapEgressQueueIndex 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.1
the number of a queue. zero is not allowed. for sap-egress, only three queues are allowed, so the queue index range is restricted.
Status: current Access: not-accessible
OBJECT-TYPE    
  TEgressQueueId 1..8  

tSapEgressQueueRowStatus 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.2
Row Status of the entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tSapEgressQueueParent 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.3
The scheduler to which this queue would be feeding to.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tSapEgressQueueLevel 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.4
This specifies the level of priority while feeding to the parent.
Status: current Access: read-create
OBJECT-TYPE    
  TLevel  

tSapEgressQueueWeight 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.5
The weight that needs to be used by the scheduler to which this queue would be feeding to.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

tSapEgressQueueCIRLevel 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.6
This specifies the level of priority while feeding to the parent. The level '0' means treat all offered load for this queue as for the above CIR traffic.
Status: current Access: read-create
OBJECT-TYPE    
  TLevelOrDefault  

tSapEgressQueueCIRWeight 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.7
The weight that needs to be used until the committed rate by the scheduler to which this queue would be feeding to.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

tSapEgressQueueExpedite 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.8
tSapEgressQueueExpedite specifies the priority that this queue should be assigned by the hardware level schedulers. The value 'auto-expedited' implies that this attribute should be dynamically updated by looking at the forwarding classes mapping into this queue. In such a case the queue is treated as 'non-expedited' if there is even a single non-expedited forwarding class using this queue. This attribute is associated with the queue at the time of creation and cannot be modified thereafter.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER expedited(1), auto-expedited(2), non-expedited(3)  

tSapEgressQueueCBS 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.9
The amount of reserved buffer space (in kilo bytes) for the queue.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstSize  

tSapEgressQueueMBS 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.10
The maximum amount of buffer space (in kilo bytes) allowed for the queue. This object has been replaced with tSapEgressQueueMBSBytes object.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TBurstSize  

tSapEgressQueueHiPrioOnly 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.11
The percentage of buffer space for the queue, used exclusively by high priority packets.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstPercentOrDefault  

tSapEgressQueuePIRAdaptation 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.12
The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
Status: current Access: read-create
OBJECT-TYPE    
  TAdaptationRule  

tSapEgressQueueCIRAdaptation 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.13
The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
Status: current Access: read-create
OBJECT-TYPE    
  TAdaptationRule  

tSapEgressQueueAdminPIR 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.14
The administrative PIR specified by the user.
Status: current Access: read-create
OBJECT-TYPE    
  TPIRRate  

tSapEgressQueueAdminCIR 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.15
The administrative CIR specified by the user.
Status: current Access: read-create
OBJECT-TYPE    
  TCIRRate  

tSapEgressQueueOperPIR 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.16
The administrative PIR specified by the user.
Status: obsolete Access: read-only
OBJECT-TYPE    
  TPIRRate  

tSapEgressQueueOperCIR 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.17
The operational value derived by computing the CIR value from the administrative CIR and PIR values and their corresponding adaptation rules.
Status: obsolete Access: read-only
OBJECT-TYPE    
  TCIRRate  

tSapEgressQueueLastChanged 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.18
timestamp of last change to this row in tSapEgressQueueTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapEgressQueueUsePortParent 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.19
The value of the object tSapEgressQueueUsePortParent specifies whether this queue is parented by a port-level scheduler. When the value is 'true', this SAP egress queue is parented by a port-level scheduler. This object is mutually exclusive with tSapEgressQueueParent. Only one kind of parent is allowed.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tSapEgressQueuePortLvl 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.20
The value of the object tSapEgressQueuePortLvl specifies the port priority this queue will use to receive bandwidth from the port-level scheduler for its above-cir offered load.
Status: current Access: read-create
OBJECT-TYPE    
  TLevel  

tSapEgressQueuePortWght 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.21
The value of the object tSapEgressQueuePortWght specifies the weight this queue will use to receive bandwidth from the port-level scheduler for its above-cir offered load.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

tSapEgressQueuePortCIRLvl 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.22
The value of the object tSapEgressQueuePortCIRLvl specifies the port priority this queue will use to receive bandwidth from the port-level scheduler for its within-cir offered load.
Status: current Access: read-create
OBJECT-TYPE    
  TLevelOrDefault  

tSapEgressQueuePortCIRWght 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.23
The value of the object tSapEgressQueuePortCIRWght specifies the weight this queue will use to receive bandwidth from the port-level scheduler for its within-cir offered load.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

tSapEgressQueuePortAvgOverhead 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.24
The value of tSapEgressQueuePortAvgOverhead specifies the encapsulation overhead, in hundredths of a percent, used to translate packet-based rate to frame-based rate and vice versa.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..10000  

tSapEgressQueuePoolName 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.25
The value of tSapEgressQueuePoolName specifies the name of the pool to be applied for SAP egress queue.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tSapEgressQueueXPWredQ 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.26
The value of tSapEgressQueueXPWredQ specifies whether to alter the generic pool association of the queue for the purpose of allowing queue-specific WRED slopes with minimal provisioning.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tSapEgressQueueXPWredQSlope 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.27
The value of tSapEgressQueueXPWredQSlope specifies the name of the slope-policy to be applied for SAP egress queue. An 'inconsistentValue' error is returned when this object is set to a non-default value when tSapEgressQueueXPWredQ is set to 'false'.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItem  

tSapEgressQueueMBSBytes 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.28
The maximum amount of buffer space (in bytes) allowed for the queue.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstSizeBytes  

tSapEgressQueueBurstLimit 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.29
The value of tSapIngressQueueBurstLimit specifies the explicit shaping burst size of a queue.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstLimit  

tSapEgressQueuePktOffset 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.30
The value of tSapEgressQueuePktOffset specifies the per packet byte offset for this queue.
Status: current Access: read-create
OBJECT-TYPE    
  TEgressQPerPacketOffset  

tSapEgressQueueAdminPIRPercent 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.31
The administrative PIR percentage, in hundredths of a percent. An 'inconsistentValue' error is returned if tSapEgressQueueAdminPIRPercent is set to non-default value when the object tSapEgressQueueRateType is set to 'kbps'.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..10000  

tSapEgressQueueAdminCIRPercent 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.32
The administrative CIR percentage, in hundredths of a percent. An 'inconsistentValue' error is returned if tSapEgressQueueAdminCIRPercent is set to non-default value when the object tSapEgressQueueRateType is set to 'kbps'.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..10000  

tSapEgressQueueRateType 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.33
The value of tSapEgressQueueRateType specifies the type of Egress Queue rate. When the value of the object is set to 'kbps', the ingresss queue rates are specified in kbps. The objects tSapEgressQueueAdminCIRPercent and tSapEgressQueueAdminPIRPercent will be set to their default values. When the value of the object is set to either 'percentOfPortLimit' or 'percentOfLocalLimit', the egress queue rates are specified in percentage. The objects tSapEgressQueueAdminCIR and tSapEgressQueueAdminPIR will be set to their default values.
Status: current Access: read-create
OBJECT-TYPE    
  TBWRateType  

tSapEgressQueueAdvCfgPolicy 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.34
The value of tSapEgressQueueAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this queue.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tSapEgressFCTable 1.3.6.1.4.1.6527.3.1.2.16.4.3
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TSapEgressFCEntry

tSapEgressFCEntry 1.3.6.1.4.1.6527.3.1.2.16.4.3.1
Information about a particular sap-egress policy's forwarding class mappings to queues and dot1p values. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapEgressFCEntry  

tSapEgressFCName 1.3.6.1.4.1.6527.3.1.2.16.4.3.1.1
forwarding class name.
Status: current Access: not-accessible
OBJECT-TYPE    
  TFCName  

tSapEgressFCRowStatus 1.3.6.1.4.1.6527.3.1.2.16.4.3.1.2
Row Status for this queue.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tSapEgressFCQueue 1.3.6.1.4.1.6527.3.1.2.16.4.3.1.3
The queue to use for packets in this forwarding class. When tSapEgressFCQGrp is set to its default value, tSapEgressFCQueue represents the local queue to which traffic will be forwarded. When tSapEgressFCQGrp is set to a non-default value, tSapEgressFCQueue represents the queue within the specified queue-group to which traffic will be forwarded.
Status: current Access: read-create
OBJECT-TYPE    
  TEgressQueueId  

tSapEgressFCDot1PValue 1.3.6.1.4.1.6527.3.1.2.16.4.3.1.4
The value of tSapEgressFCDot1PValue specifies 802.1p value to use for packets in this forwarding class. This object has been replaced by tSapEgressFCDot1PInProfile and tSapEgressFCDot1POutProfile objects.
Status: obsolete Access: read-create
OBJECT-TYPE    
  Dot1PPriority  

tSapEgressFCLastChanged 1.3.6.1.4.1.6527.3.1.2.16.4.3.1.5
timestamp of last change to this row in tSapEgressFCTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapEgressFCHsmdaQueue 1.3.6.1.4.1.6527.3.1.2.16.4.3.1.6
The HSMDA queue to use for packets in this forwarding class. This mapping will be used when the SAP is on a HSMDA MDA.
Status: current Access: read-create
OBJECT-TYPE    
  TEgressHsmdaQueueId  

tSapEgressFCDot1PHsmdaProfile 1.3.6.1.4.1.6527.3.1.2.16.4.3.1.7
The value of the object tSapEgressFCDot1PHsmdaProfile specifies if the system will perform egress profiling on HSMDA queues or not. The tSapEgressFCDot1PHsmdaProfile object is obsoleted in 9.0 Release.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TruthValue  

tSapEgressFCDot1PInProfile 1.3.6.1.4.1.6527.3.1.2.16.4.3.1.8
The value of tSapEgressFCDot1PInProfile specifies 802.1p value to set for in-profile frames in this forwarding class. An inconsistentValue error is returned if this object is set to any value other than '-1', when tSapEgressFCDot1POutProfile object is set to '-1'.
Status: current Access: read-create
OBJECT-TYPE    
  Dot1PPriority  

tSapEgressFCDot1POutProfile 1.3.6.1.4.1.6527.3.1.2.16.4.3.1.9
The value of tSapEgressFCDot1POutProfile specifies 802.1p value to set for out-profile frames in this forwarding class. An inconsistentValue error is returned if this object is set to any value other than '-1', when tSapEgressFCDot1PInProfile object is set to '-1'.
Status: current Access: read-create
OBJECT-TYPE    
  Dot1PPriority  

tSapEgressFCForceDEValue 1.3.6.1.4.1.6527.3.1.2.16.4.3.1.10
The value of tSapEgressFCForceDEValue specifies the DE value to set for all the frames of this forwarding class regardless of frame's profile status. An inconsistentValue error is returned if this object is set to any value other than '-1', when tSapEgressFCDEMark object is set to 'false'.
Status: current Access: read-create
OBJECT-TYPE    
  TDEValue  

tSapEgressFCDEMark 1.3.6.1.4.1.6527.3.1.2.16.4.3.1.11
The value of tSapEgressFCDEMark specifies whether to set DE value in the frames of this forwarding class. An inconsistentValue error is returned if this object is set to 'false' when tSapEgressFCForceDEValue object is not set to '-1'.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tSapEgressFCInProfDscp 1.3.6.1.4.1.6527.3.1.2.16.4.3.1.12
The value of tSapEgressFCInProfDscp specifies the DSCP name to set for in-profile frames in this forwarding class. The values of tSapEgressFCInProfDscp and tSapEgressFCOutProfDscp must be set to either the default or non-default values for both. An inconsistentValue error is returned if one object is set to the default and other is set to a non-default value. The values of tSapEgressFCInProfPrec and tSapEgressFCOutProfPrec are reset to default values when tSapEgressFCInProfDscp is set to any value other than default. An inconsistentValue error is returned if this object is set to any value other than its default value when setting tSapEgressFCInProfPrec object or tSapEgressFCOutProfPrec to a value other than their default values.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tSapEgressFCOutProfDscp 1.3.6.1.4.1.6527.3.1.2.16.4.3.1.13
The value of tSapEgressFCOutProfDscp specifies the DSCP name to set for out-profile frames in this forwarding class. The values of tSapEgressFCInProfDscp and tSapEgressFCOutProfDscp must be set to either the default or non-default values for both. An inconsistentValue error is returned if one object is set to the default and other is set to a non-default value. The values of tSapEgressFCInProfPrec and tSapEgressFCOutProfPrec are reset to default values when tSapEgressFCOutProfDscp is set to any value other than default. An inconsistentValue error is returned if this object is set to any value other than its default value when setting tSapEgressFCInProfPrec object or tSapEgressFCOutProfPrec to a value other than their default values.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tSapEgressFCInProfPrec 1.3.6.1.4.1.6527.3.1.2.16.4.3.1.14
The value of tSapEgressFCInProfPrec specifies the precedence value to set for in-profile frames in this forwarding class. The values of tSapEgressFCInProfPrec and tSapEgressFCOutProfPrec must be set to either the default or non-default values for both. An inconsistentValue error is returned if one object is set to the default and other is set to a non-default value. The values of tSapEgressFCInProfDscp and tSapEgressFCOutProfDscp are reset to default values when tSapEgressFCOutProfPrec is set to any value other than default. An inconsistentValue error is returned if this object is set to any value other than its default value when setting tSapEgressFCInProfDscp object or tSapEgressFCOutProfDscp to a value other than their default values.
Status: current Access: read-create
OBJECT-TYPE    
  TPrecValueOrNone  

tSapEgressFCOutProfPrec 1.3.6.1.4.1.6527.3.1.2.16.4.3.1.15
The value of tSapEgressFCOutProfPrec specifies the precedence value to set for out-profile frames in this forwarding class. The values of tSapEgressFCInProfPrec and tSapEgressFCOutProfPrec must be be set to either the default or non-default values for both. An inconsistentValue error is returned if one object is set to the default and other is set to a non-default value. The values of tSapEgressFCInProfDscp and tSapEgressFCOutProfDscp are reset to default values when tSapEgressFCOutProfPrec is set to any value other than default. An inconsistentValue error is returned if this object is set to any value other than its default value when setting tSapEgressFCInProfDscp object or tSapEgressFCOutProfDscp to a value other than their default values.
Status: current Access: read-create
OBJECT-TYPE    
  TPrecValueOrNone  

tSapEgressFCQGrp 1.3.6.1.4.1.6527.3.1.2.16.4.3.1.16
The value of tSapEgressFCQGrp specifies the tQosEgrQGroupName. When set to a non-default value, this indicates the name of the queue-group to which traffic will be forwarded.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tSapEgressFCPolicer 1.3.6.1.4.1.6527.3.1.2.16.4.3.1.17
The value of tSapEgressFCPolicer specifies the SAP Egress Policer identifier. If a corresponding Sap Egress Policer Id does not exist in tSapEgrPolicerTable, an 'inconsistentValue' error will be returned. When tSapEgressFCPolicer is set to its default value, then traffic for this forwarding class will not use policers. When tSapEgressFCPolicer is set to a non-default value, and tSapEgressFCQGrp is set to default, and tSapEgressFCQueue is set to default, then traffic will use the given policer, and then feed into a system determined queue-group queue. When tSapEgressFCPolicer is set to a non-default value, and tSapEgressFCQGrp is set to a non-default value, and tSapEgressFCQueue is set to default, then traffic will use the given policer, and then feed into a queue within the given queue-group according to the appropriate tQosEgrQGroupFCEntry. When tSapEgressFCPolicer is set to a non-default value, and tSapEgressFCQGrp is set to a non-default value, and tSapEgressFCQueue is set to a non-default value, then trafifc will use the given policer, and then feed into the given queue within the given queue-group. When tSapEgressFCPolicer is set to a non-default value, and tSapEgressFCQGrp is set its default value, and tSapEgressFCQueue is set to a non-default value, then trafifc will use the given policer, and then feed into the given local queue.
Status: current Access: read-create
OBJECT-TYPE    
  TEgrPolicerIdOrNone  

tSapEgressFCQGrpFC 1.3.6.1.4.1.6527.3.1.2.16.4.3.1.18
The value of tSapEgressFCQGrpFC, when specified, will replace the forwarding class derived from ingress as the forwarding class to use inside the egress queue group. tSapEgressFCQGrpFC is only allowed to be used in conjunction with egress policers, and is mutually exclusive with direct queue-group queue mappings. An 'inconsistentValue' error is returned if tSapEgressFCQGrpFC is set to a non-default value when tSapEgressFCPolicer is set to default.
Status: current Access: read-create
OBJECT-TYPE    
  TFCNameOrEmpty  

tSapEgressHsmdaQueueTable 1.3.6.1.4.1.6527.3.1.2.16.4.4
Information about all sap-egress policies' HSMDA queues.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TSapEgressHsmdaQueueEntry

tSapEgressHsmdaQueueEntry 1.3.6.1.4.1.6527.3.1.2.16.4.4.1
Information about a particular HSMDA queue for a sap-egress policy. Entries are created by user.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapEgressHsmdaQueueEntry  

tSapEgressHsmdaQueue 1.3.6.1.4.1.6527.3.1.2.16.4.4.1.1
The HSMDA queue ID is used as the secondary index to the table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  TEgressHsmdaQueueId 1..8  

tSapEgressHsmdaQueueRowStatus 1.3.6.1.4.1.6527.3.1.2.16.4.4.1.2
The value of tSapEgressHsmdaQueueRowStatus is used for the creation and deletion of entries in the tSapEgressHsmdaQueueTable.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tSapEgressHsmdaQueueCIRAdaptn 1.3.6.1.4.1.6527.3.1.2.16.4.4.1.3
The value of tSapEgressHsmdaQueueCIRAdaptn specifies the adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset. This object is obsoleted in 10.0 Release.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TAdaptationRule  

tSapEgressHsmdaQueuePIRAdaptn 1.3.6.1.4.1.6527.3.1.2.16.4.4.1.4
The value of tSapEgressHsmdaQueuePIRAdaptn specifies the adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
Status: current Access: read-create
OBJECT-TYPE    
  TAdaptationRule  

tSapEgressHsmdaQueueAdminPIR 1.3.6.1.4.1.6527.3.1.2.16.4.4.1.5
The value of tSapEgressHsmdaQueueAdminPIR specifies the administrative PIR specified by the user.
Status: current Access: read-create
OBJECT-TYPE    
  THsmdaPIRKRate  

tSapEgressHsmdaQueueAdminCIR 1.3.6.1.4.1.6527.3.1.2.16.4.4.1.6
The value of tSapEgressHsmdaQueueAdminCIR specifies the administrative CIR specified by the user. This object is obsoleted in 10.0 Release.
Status: obsolete Access: read-create
OBJECT-TYPE    
  THsmdaCIRKRate  

tSapEgressHsmdaQueueSlopePolicy 1.3.6.1.4.1.6527.3.1.2.16.4.4.1.7
The value of tSapEgressHsmdaQueueSlopePolicy specifies the slope policy specified by the user.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItem  

tSapEgressHsmdaQueueLastChanged 1.3.6.1.4.1.6527.3.1.2.16.4.4.1.8
The value of tSapEgressHsmdaQueueLastChanged indicates the timestamp of last change to this row in tSapEgressHsmdaQueueTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapEgressHsmdaQueueWrrWeight 1.3.6.1.4.1.6527.3.1.2.16.4.4.1.9
The value of tSapEgressHsmdaQueueWrrWeight specifies the weight with which this queue should parent into the HSMDA scheduler, provided it is not superseded by the Weighted Round Robin (WRR) policy. The weight of each queue determines how much bandwidth that queue gets out of the total rate for the scheduling class.
Status: current Access: read-create
OBJECT-TYPE    
  THsmdaWrrWeight  

tSapEgressHsmdaQueueMBS 1.3.6.1.4.1.6527.3.1.2.16.4.4.1.10
The value of tSapEgressHsmdaQueueMBS specifies the maximum amount of buffer space (in bytes) allowed for this HSMDA queue.
Status: current Access: read-create
OBJECT-TYPE    
  THSMDABurstSizeBytes  

tSapEgressHsmdaQueueBurstLimit 1.3.6.1.4.1.6527.3.1.2.16.4.4.1.11
The value of tSapEgressHsmdaQueueBurstLimit specifies the explicit shaping burst size of the queue.
Status: current Access: read-create
OBJECT-TYPE    
  THSMDAQueueBurstLimit  

tSapEgressDSCPTable 1.3.6.1.4.1.6527.3.1.2.16.4.5
a list of all DSCP entries for all sap-egress policies.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TSapEgressDSCPEntry

tSapEgressDSCPEntry 1.3.6.1.4.1.6527.3.1.2.16.4.5.1
Information about a particular DSCP entry for a sap-egress policy. Entries are created by user. Entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile. in the event that one policy has multiple entries, and the tSapEgressDSCP values are the same, only one queue will be created (the queue for the lexicographically first tSapEgressDSCP).
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapEgressDSCPEntry  

tSapEgressDSCP 1.3.6.1.4.1.6527.3.1.2.16.4.5.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  TDSCPName  

tSapEgressDSCPRowStatus 1.3.6.1.4.1.6527.3.1.2.16.4.5.1.2
The value of tSapEgressDSCPRowStatus controls the creation/deletion of rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tSapEgressDSCPLastChanged 1.3.6.1.4.1.6527.3.1.2.16.4.5.1.3
The value of tSapEgressDSCPLastChanged indicates the sysUpTime at the time of the most recent management-initiated change to this table row.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapEgressDSCPHsmdaCntrOverride 1.3.6.1.4.1.6527.3.1.2.16.4.5.1.4
The value of the object tSapEgressDSCPHsmdaCntrOverride specifies the counter to use for all the traffic that matches the specific DSCP i.e. tSapEgressDSCP. A value of zero implies that the default counters should be used.
Status: current Access: read-create
OBJECT-TYPE    
  TEgressHsmdaCounterIdOrZero  

tSapEgressDSCPfc 1.3.6.1.4.1.6527.3.1.2.16.4.5.1.5
The value of tSapEgressDSCPfc, when specified, will overwrite the forwarding class derived from ingress. The new forwarding class is used for egress remarking and queue mapping decisions.
Status: current Access: read-create
OBJECT-TYPE    
  TFCNameOrEmpty  

tSapEgressDSCPprofile 1.3.6.1.4.1.6527.3.1.2.16.4.5.1.6
The value of tSapEgressDSCPprofile, when provided, specifies the egress classification rule that will overwrite the profile of the packet derived from the ingress. The new profile value is used for egress remarking and queue congestion behavior.
Status: current Access: read-create
OBJECT-TYPE    
  TProfileOrNone  

tSapEgressPrecTable 1.3.6.1.4.1.6527.3.1.2.16.4.6
This table maintains the mapping of a particular precedence value into a forwarding class
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TSapEgressPrecEntry

tSapEgressPrecEntry 1.3.6.1.4.1.6527.3.1.2.16.4.6.1
Information about a particular sap-egress policy's IP precedence values to forwarding class mappings. Entries are created and deleted by user. They have a presumed StorageType of nonVolatile.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapEgressPrecEntry  

tSapEgressPrecValue 1.3.6.1.4.1.6527.3.1.2.16.4.6.1.1
The value of tSapEgressPrecValue indicates the precedence value for which the mapping is done. It is used as a secondary index for tSapEgressPrecTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  TPrecValue  

tSapEgressPrecRowStatus 1.3.6.1.4.1.6527.3.1.2.16.4.6.1.2
The value of tSapEgressPrecRowStatus controls the creation/deletion of rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tSapEgressPrecLastChanged 1.3.6.1.4.1.6527.3.1.2.16.4.6.1.3
The value of tSapEgressPrecLastChanged indicates the sysUpTime at the time of the most recent management-initiated change to this table row.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapEgressPrecHsmdaCntrOverride 1.3.6.1.4.1.6527.3.1.2.16.4.6.1.4
The value of tSapEgressPrecHsmdaCntrOverride specifies the counter to use for all the traffic that matches the specific precedence value i.e. tSapEgressPrecValue. A value of zero implies that the default counters should be used.
Status: current Access: read-create
OBJECT-TYPE    
  TEgressHsmdaCounterIdOrZero  

tSapEgressPrecFC 1.3.6.1.4.1.6527.3.1.2.16.4.6.1.5
The value of tSapEgressPrecFC, when specified, will overwrite the forwarding class derived from ingress. The new forwarding class is used for egress remarking and queue mapping decisions.
Status: current Access: read-create
OBJECT-TYPE    
  TFCNameOrEmpty  

tSapEgressPrecProfile 1.3.6.1.4.1.6527.3.1.2.16.4.6.1.6
The value of tSapEgressPrecProfile, when provided, specifies the egress classification rule that will overwrite the profile of the packet derived from the ingress. The new profile value is used for egress remarking and queue congestion behavior.
Status: current Access: read-create
OBJECT-TYPE    
  TProfileOrNone  

tSapEgrIPCritTable 1.3.6.1.4.1.6527.3.1.2.16.4.7
This table maintains the entries for matching criteria for IP packets on egress. In release 10.0 and higher, this table can also contain IPv6 criteria.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TSapEgrIPCritEntry

tSapEgrIPCritEntry 1.3.6.1.4.1.6527.3.1.2.16.4.7.1
Information about a particular egress IP or IPv6 matching criteria entry. Entries are created and deleted by user. They have a presumed StorageType of nonVolatile.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapEgrIPCritEntry  

tSapEgrIPCritAddrType 1.3.6.1.4.1.6527.3.1.2.16.4.7.1.1
The value of tSapEgrIPCritAddrType specifies the index address type this entry should match against.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

tSapEgrIPCritIndex 1.3.6.1.4.1.6527.3.1.2.16.4.7.1.2
The value of tSapEgrIPCritIndex specifies the index for a sap-egress IP or IPv6 criteria entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

tSapEgrIPCritRowStatus 1.3.6.1.4.1.6527.3.1.2.16.4.7.1.3
The value of tSapEgrIPCritRowStatus is used for the creation and deletion of sap-egress IP or IPv6 criteria entries.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tSapEgrIPCritLastChanged 1.3.6.1.4.1.6527.3.1.2.16.4.7.1.4
The value of tSapEgrIPCritLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapEgrIPCritDescription 1.3.6.1.4.1.6527.3.1.2.16.4.7.1.5
The value of tSapEgrIPCritDescription specifies a description of the sap-egress IP or IPv6 criteria entry.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tSapEgrIPCritActionHsmdaCntrOvr 1.3.6.1.4.1.6527.3.1.2.16.4.7.1.6
The value of the object tSapEgrIPCritActionHsmdaCntrOvr specifies the Hsmda counter to use for matching packets. This value will be ignored when the sap-egress policy specified by tSapEgressIndex, is applied to a SAP on a non-Hsmda MDA type. A value of zero implies that the default counters should be used.
Status: current Access: read-create
OBJECT-TYPE    
  TEgressHsmdaCounterIdOrZero  

tSapEgrIPCritSourceIpAddrType 1.3.6.1.4.1.6527.3.1.2.16.4.7.1.7
The value of tSapEgrIPCritSourceIpAddrType specifies the address type of tSapEgrIPCritSourceIpAddr. If the value of this object is not 'none', it must have the same value as tSapEgrIPCritAddrType.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

tSapEgrIPCritSourceIpAddr 1.3.6.1.4.1.6527.3.1.2.16.4.7.1.8
The value of tSapEgrIPCritSourceIpAddr specifies the IP or IPv6 address to match with source-IP of the packet.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

tSapEgrIPCritSourceIpMask 1.3.6.1.4.1.6527.3.1.2.16.4.7.1.9
The value of tSapEgrIPCritSourceIpMask specifies the number of bits of the source IP or IPv6 address to match.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressPrefixLength  

tSapEgrIPCritDestIpAddrType 1.3.6.1.4.1.6527.3.1.2.16.4.7.1.10
The value of tSapEgrIPCritDestIpAddrType specifies the address type of tSapEgrIPCritDestIpAddr. If the value of this object is not 'none', it must have the same value as tSapEgrIPCritAddrType.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

tSapEgrIPCritDestIpAddr 1.3.6.1.4.1.6527.3.1.2.16.4.7.1.11
The value of tSapEgrIPCritDestIpAddr specifies the IP or IPv6 address to match with destination-IP of the packet.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

tSapEgrIPCritDestIpMask 1.3.6.1.4.1.6527.3.1.2.16.4.7.1.12
The value of tSapEgrIPCritDestIpMask specifies the number of bits of the destination IP or IPv6 address to match.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressPrefixLength  

tSapEgrIPCritProtocol 1.3.6.1.4.1.6527.3.1.2.16.4.7.1.13
The value of tSapEgrIPCritProtocol specifies the IP protocol or IPv6 next-header to match. The value '-1' is used to disable matching by IP protocol or IPv6 next-header. When this value specifies an IPv6 next-header, since the match criteria only pertains to the last next-header, the following values are not accepted: 0, 43, 44, 50, 51, and 60.
Status: current Access: read-create
OBJECT-TYPE    
  TIpProtocol  

tSapEgrIPCritSourcePortValue1 1.3.6.1.4.1.6527.3.1.2.16.4.7.1.14
The value of tSapEgrIPCritSourcePortValue1 specifies the first TCP/UDP source port value. The value of this object is used according to the value of tSapEgrIPCritSourcePortOperator.
Status: current Access: read-create
OBJECT-TYPE    
  TTcpUdpPort  

tSapEgrIPCritSourcePortValue2 1.3.6.1.4.1.6527.3.1.2.16.4.7.1.15
The value of tSapEgrIPCritSourcePortValue2 specifies the second TCP/UDP source port value. The value of this object is used according to the value of tSapEgrIPCritSourcePortOperator.
Status: current Access: read-create
OBJECT-TYPE    
  TTcpUdpPort  

tSapEgrIPCritSourcePortOperator 1.3.6.1.4.1.6527.3.1.2.16.4.7.1.16
The value of tSapEgrIPCritSourcePortOperator specifies the manner in which tSapEgrIPCritSourcePortValue1 and tSapEgrIPCritSourcePortValue2 are to be used.
Status: current Access: read-create
OBJECT-TYPE    
  TTcpUdpPortOperator  

tSapEgrIPCritDestPortValue1 1.3.6.1.4.1.6527.3.1.2.16.4.7.1.17
The value of tSapEgrIPCritDestPortValue1 specifies the first TCP/UDP destination port value. The value of this object is used according to the value of tSapEgrIPCritDestPortOperator.
Status: current Access: read-create
OBJECT-TYPE    
  TTcpUdpPort  

tSapEgrIPCritDestPortValue2 1.3.6.1.4.1.6527.3.1.2.16.4.7.1.18
The value of tSapEgrIPCritDestPortValue2 specifies the second TCP/UDP destination port value. The value of this object is used according to the value of tSapEgrIPCritDestPortOperator.
Status: current Access: read-create
OBJECT-TYPE    
  TTcpUdpPort  

tSapEgrIPCritDestPortOperator 1.3.6.1.4.1.6527.3.1.2.16.4.7.1.19
The value of tSapEgrIPCritDestPortOperator specifies the manner in which tSapEgrIPCritDestPortValue1 and tSapEgrIPCritDestPortValue2 are to be used.
Status: current Access: read-create
OBJECT-TYPE    
  TTcpUdpPortOperator  

tSapEgrIPCritDSCP 1.3.6.1.4.1.6527.3.1.2.16.4.7.1.20
The value of tSapEgrIPCritDSCP specifies the DSCP value to match in the packet
Status: current Access: read-create
OBJECT-TYPE    
  TDSCPNameOrEmpty  

tSapEgrIPCritFragment 1.3.6.1.4.1.6527.3.1.2.16.4.7.1.21
The value of tSapEgrIPCritFragment specifies fragmented packet matching. If the value is 'true', only fragmented packets match. If the value is 'false', only non-fragmented packets match. If the value is 'off', all packets match regardless. This field is only relevant for ipv4. An inconsistentValue error is returned when the value of tSapEgrIPCritFragment is not 'off' and the value of tSapEgrIPCritAddrType is not 'ipv4'.
Status: current Access: read-create
OBJECT-TYPE    
  TItemMatch  

tSapEgrIPCritActionFC 1.3.6.1.4.1.6527.3.1.2.16.4.7.1.22
tSapEgrIPCritActionFC specifies the forwarding class to be used to classify all the traffic that matches the specific IP or IPv6 criteria. The value ''H indicates that the FC is derived from ingress classification and profiling functions.
Status: current Access: read-create
OBJECT-TYPE    
  TFCNameOrEmpty  

tSapEgrIPCritActionProfile 1.3.6.1.4.1.6527.3.1.2.16.4.7.1.23
tSapEgrIPCritActionProfile specifies the profile of the traffic that matches the specific IP or IPv6 criteria. The value none indicates that the profile is derived from ingress classification and profiling functions.
Status: current Access: read-create
OBJECT-TYPE    
  TProfileOrNone  

tSapEgrPolicerTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.86
tSapEgrPolicerTableLastChanged indicates the timestamp of last change to the tSapEgrPolicerTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapEgrPolicerTable 1.3.6.1.4.1.6527.3.1.2.16.4.8
tSapEgrPolicerTable defines SAP Egress Policer Table for providing, via SNMP, the capability of defining the policers. tSapEgrPolicerTable holds a list of all the policers configured in the managed system. Policers must exist in this table before being referenced by the forwarding class mappings within the queue policy as defined in the tSapEgressFCTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TSapEgrPolicerEntry

tSapEgrPolicerEntry 1.3.6.1.4.1.6527.3.1.2.16.4.8.1
tSapEgrPolicerEntry defines an entry in the tSapEgrPolicerTable. Entries are created/deleted in this table by SNMP sets to tSapEgrPolicerRowStatus.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapEgrPolicerEntry  

tSapEgrPolicerId 1.3.6.1.4.1.6527.3.1.2.16.4.8.1.1
tSapEgrPolicerId defines the SAP Egress Policer identifier. It identifies an sap-egress policer in the managed system.
Status: current Access: not-accessible
OBJECT-TYPE    
  TEgrPolicerId  

tSapEgrPolicerRowStatus 1.3.6.1.4.1.6527.3.1.2.16.4.8.1.2
tSapEgrPolicerRowStatus allows entries to be created and deleted in the tSapEgrPolicerTable.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tSapEgrPolicerLastChanged 1.3.6.1.4.1.6527.3.1.2.16.4.8.1.3
tSapEgrPolicerLastChanged indicates the value of sysUpTime when the entry was last modified.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapEgrPolicerDescr 1.3.6.1.4.1.6527.3.1.2.16.4.8.1.4
tSapEgrPolicerDescr specifies the description of the policer.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tSapEgrPolicerPIRAdaptation 1.3.6.1.4.1.6527.3.1.2.16.4.8.1.5
The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
Status: current Access: read-create
OBJECT-TYPE    
  TAdaptationRule  

tSapEgrPolicerCIRAdaptation 1.3.6.1.4.1.6527.3.1.2.16.4.8.1.6
The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
Status: current Access: read-create
OBJECT-TYPE    
  TAdaptationRule  

tSapEgrPolicerParent 1.3.6.1.4.1.6527.3.1.2.16.4.8.1.7
tSapEgrPolicerParent specifies the scheduler to which this queue would be feeding.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tSapEgrPolicerLevel 1.3.6.1.4.1.6527.3.1.2.16.4.8.1.8
tSapEgrPolicerLevel specifies the level of priority while feeding the parent.
Status: current Access: read-create
OBJECT-TYPE    
  TLevel  

tSapEgrPolicerWeight 1.3.6.1.4.1.6527.3.1.2.16.4.8.1.9
tSapEgrPolicerWeight specifies the weight that needs to be used by the scheduler to which this queue would be feeding.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicerWeight  

tSapEgrPolicerAdminPIR 1.3.6.1.4.1.6527.3.1.2.16.4.8.1.10
tSapEgrPolicerAdminPIR specifies the administrative PIR specified by the user.
Status: current Access: read-create
OBJECT-TYPE    
  THPolPIRRate  

tSapEgrPolicerAdminCIR 1.3.6.1.4.1.6527.3.1.2.16.4.8.1.11
tSapEgrPolicerAdminCIR specifies the administrative CIR specified by the user.
Status: current Access: read-create
OBJECT-TYPE    
  THPolCIRRate  

tSapEgrPolicerStatMode 1.3.6.1.4.1.6527.3.1.2.16.4.8.1.12
tSapEgrPolicerStatMode specifies the mode of statistics collected by this policer.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxEgrPolicerStatMode  

tSapEgrPolicerMBS 1.3.6.1.4.1.6527.3.1.2.16.4.8.1.13
The tSapEgrPolicerMBS specifies the high priority 'violate' threshold of PIR leaky bucket of this policer.
Status: current Access: read-create
OBJECT-TYPE    
  TPlcrBurstSizeBytes  

tSapEgrPolicerHiPrioOnly 1.3.6.1.4.1.6527.3.1.2.16.4.8.1.14
The tSapEgrPolicerHiPrioOnly specifies the percentage of PIR leaky bucket's MBS (maximum burst size) of this policer that is reserved for high priority traffic.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstPercentOrDefault  

tSapEgrPolicerCBS 1.3.6.1.4.1.6527.3.1.2.16.4.8.1.15
The tSapEgrPolicerCBS specifies the 'exceed' threshold of the CIR leaky bucket of this policer.
Status: current Access: read-create
OBJECT-TYPE    
  TPlcrBurstSizeBytes  

tSapEgrPolicerPktOffset 1.3.6.1.4.1.6527.3.1.2.16.4.8.1.16
tSapEgrPolicerPktOffset specifies the packet byte offset for addition of policing information by this policer.
Status: current Access: read-create
OBJECT-TYPE    
  TPerPacketOffset  

tSapEgrPolicerAdminPIRPercent 1.3.6.1.4.1.6527.3.1.2.16.4.8.1.17
The administrative PIR percentage, in hundredths of a percent. An 'inconsistentValue' error is returned if tSapEgrPolicerAdminPIRPercent is set to non-default value when the object tSapEgrPolicerRateType is set to 'kbps'.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..10000  

tSapEgrPolicerAdminCIRPercent 1.3.6.1.4.1.6527.3.1.2.16.4.8.1.18
The administrative CIR percentage, in hundredths of a percent. An 'inconsistentValue' error is returned if tSapEgrPolicerAdminCIRPercent is set to non-default value when the object tSapEgrPolicerRateType is set to 'kbps'.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..10000  

tSapEgrPolicerRateType 1.3.6.1.4.1.6527.3.1.2.16.4.8.1.19
The value of tSapEgrPolicerRateType specifies the type of egress policer rate. When the value of the object is set to 'kbps', the egresss policer rates are specified in kbps. The objects tSapEgrPolicerAdminPIRPercent and tSapEgrPolicerAdminCIRPercent will be set to their default values. When the value of the object is set to 'percentOfLocalLimit', the egress policer rates are specified in percentage. The objects tSapEgrPolicerAdminPIR and tSapEgrPolicerAdminCIR will be set to their default values.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicerRateType  

tSapEgrPolicerSlopeStartDepth 1.3.6.1.4.1.6527.3.1.2.16.4.8.1.20
The value of tSapEgrPolicerSlopeStartDepth specifies the percentage of the buffer utilized after which the drop probability starts to rise above 0.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..10000  

tSapEgrPolicerSlopeMaxDepth 1.3.6.1.4.1.6527.3.1.2.16.4.8.1.21
The value of tSapEgrPolicerSlopeMaxDepth specifies the percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..10000  

tSapEgrPolicerSlopeMaxProb 1.3.6.1.4.1.6527.3.1.2.16.4.8.1.22
The value of tSapEgrPolicerSlopeMaxProb specifies the drop probability, as a percentage, when the queue depth reaches tSapEgrPolicerSlopeMaxDepth. The drop increases steadily from 0 at the tSapEgrPolicerSlopeStartDepth up to the tSapEgrPolicerSlopeMaxProb at the tSapEgrPolicerSlopeMaxDepth.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..10000  

tSapEgrPolicerSlopeMap 1.3.6.1.4.1.6527.3.1.2.16.4.8.1.23
The value of tSapEgrPolicerSlopeMap specifies the slope map to be used with this policer.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxSlopeMap  

tSapEgrPolicerAdvCfgPolicy 1.3.6.1.4.1.6527.3.1.2.16.4.8.1.24
The value of tSapEgrPolicerAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this policer.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tSapEgrPolicerProfileCapped 1.3.6.1.4.1.6527.3.1.2.16.4.8.1.25
The value of tSapEgrPolicerProfileCapped specifies how the explicit in-profile and undetermined profile traffic should be handled at the egress policer. When the value of tSapEgrPolicerProfileCapped is set to 'true', both explicit in-profile and undetermined profile traffic is honored up to CIR, above which it is marked as out-of-profile. If CIR is set to zero, then all explicit in-profile and undetermined profile packets, along with the explicit out-of-profile packets are marked as out-of-profile. The default behavior when tSapEgrPolicerProfileCapped is set to 'false' is to ignore the CIR output state when an explicit in-profile packet is handled by an egress policer.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tSapEgrPolicyNameTableLastChgd 1.3.6.1.4.1.6527.3.1.2.16.20.96
The value of tSapEgrPolicyNameTableLastChgd indicates the sysUpTime at the time of the last modification of tSapEgrPolicyNameTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapEgrPolicyNameTable 1.3.6.1.4.1.6527.3.1.2.16.4.9
A table that contains SAP egress policy name information. Entries are created automatically by the system when tSapEgressPolicyName object is set for the SAP egress policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TSapEgrPolicyNameEntry

tSapEgrPolicyNameEntry 1.3.6.1.4.1.6527.3.1.2.16.4.9.1
Basic information about a specific SAP egress policy name.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapEgrPolicyNameEntry  

tSapEgrPolicyNameId 1.3.6.1.4.1.6527.3.1.2.16.4.9.1.1
The value of the object tSapEgrPolicyNameId specifies the policy name associated with this SAP egress policy.
Status: current Access: read-only
OBJECT-TYPE    
  TSapEgressPolicyID  

tSapEgrPolicyNameRowStatus 1.3.6.1.4.1.6527.3.1.2.16.4.9.1.2
This value of the object tSapEgrPolicyNameRowStatus specifies the status of this row.
Status: current Access: read-only
OBJECT-TYPE    
  RowStatus  

tSapEgrPolicyNameLastChanged 1.3.6.1.4.1.6527.3.1.2.16.4.9.1.3
The value of tSapEgrPolicyNameLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapEgressDot1pTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.99
tSapEgressDot1pTableLastChanged indicates the timestamp of last change to the tSapEgressDot1pTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapEgressDot1pTable 1.3.6.1.4.1.6527.3.1.2.16.4.10
A table that contains the list of all dot1p entries for all sap-egress policies.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TSapEgressDot1pEntry

tSapEgressDot1pEntry 1.3.6.1.4.1.6527.3.1.2.16.4.10.1
Information about a particular dot1p match for a sap-egress policy. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapEgressDot1pEntry  

tSapEgressDot1pValue 1.3.6.1.4.1.6527.3.1.2.16.4.10.1.1
The value of tSapEgressDot1pValue specifies the dotp value to match in the packet. This value is also used as an index so that for any dot1p value there is only one possible disposition queue and priority.
Status: current Access: not-accessible
OBJECT-TYPE    
  Dot1PPriority 0..7  

tSapEgressDot1pRowStatus 1.3.6.1.4.1.6527.3.1.2.16.4.10.1.2
tSapEgressDot1pRowStatus allows entries to be created and deleted in the tSapEgressDot1pTable.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tSapEgressDot1pLastChanged 1.3.6.1.4.1.6527.3.1.2.16.4.10.1.3
The value of tSapEgressDot1pLastChanged indicates the sysUpTime at the time of the last modification of this entry.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapEgressDot1pFC 1.3.6.1.4.1.6527.3.1.2.16.4.10.1.4
The value of tSapEgressDot1pFC specifies the forwarding class to be used to classify all the traffic that matches the Dot1p value specified by tSapEgressDot1pValue. Unless tSapEgressDot1pFC is specified explicitly, this match will be ignored for classification purposes.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tSapEgressDot1pProfile 1.3.6.1.4.1.6527.3.1.2.16.4.10.1.5
The value of tSapEgressDot1pProfile specifies the profile to use for packets that match the dot1p value specified by tSapEgressDot1pValue.
Status: current Access: read-create
OBJECT-TYPE    
  TProfileUseDEOrNone  

tNetworkPolicyTable 1.3.6.1.4.1.6527.3.1.2.16.5.1
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TNetworkPolicyEntry

tNetworkPolicyEntry 1.3.6.1.4.1.6527.3.1.2.16.5.1.1
Information about a particular Network Policy. network policy (1) is the default entry. Default Entry is created by the agent, other entries are created by user. Default Entry cannot be modified/deleted. The other entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile. The default Egress FC entries are created as an action of setting the rowstatus.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNetworkPolicyEntry  

tNetworkPolicyIndex 1.3.6.1.4.1.6527.3.1.2.16.5.1.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  TNetworkPolicyID 1..65535 | 65536 | 65537  

tNetworkPolicyRowStatus 1.3.6.1.4.1.6527.3.1.2.16.5.1.1.2
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tNetworkPolicyScope 1.3.6.1.4.1.6527.3.1.2.16.5.1.1.5
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  TItemScope  

tNetworkPolicyDescription 1.3.6.1.4.1.6527.3.1.2.16.5.1.1.6
tNetworkPolicyDescription holds the description for this policy.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tNetworkPolicyIngressDefaultActionFC 1.3.6.1.4.1.6527.3.1.2.16.5.1.1.7
tNetworkPolicyIngressDefaultActionFC specifies the default forwarding class to be used while classifying the ingress traffic.
Status: current Access: read-create
OBJECT-TYPE    
  TFCName  

tNetworkPolicyIngressDefaultActionProfile 1.3.6.1.4.1.6527.3.1.2.16.5.1.1.8
tNetworkPolicyIngressDefaultActionProfile specifies the default profile to be used for the ingressing traffic.
Status: current Access: read-create
OBJECT-TYPE    
  TProfileOrDei  

tNetworkPolicyEgressRemark 1.3.6.1.4.1.6527.3.1.2.16.5.1.1.9
The object tNetworkPolicyEgressRemark specifies if the system will remark the egress packets or not.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tNetworkPolicyLastChanged 1.3.6.1.4.1.6527.3.1.2.16.5.1.1.10
Timestamp of last change to this row in tNetworkPolicyTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tNetworkPolicyIngressLerUseDscp 1.3.6.1.4.1.6527.3.1.2.16.5.1.1.11
The object has significance only for the label edge routers which should honor the DSCP markings instead of the LSPEXP bits.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tNetworkPolicyEgressRemarkDscp 1.3.6.1.4.1.6527.3.1.2.16.5.1.1.12
The value of tNetworkPolicyEgressRemarkDscp object specifies whether DSCP bits in the internal IP header should be remarked. This object is valid only when tNetworkPolicyEgressRemark is set to 'true'.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tNetworkIngressDSCPTable 1.3.6.1.4.1.6527.3.1.2.16.5.2
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TNetworkIngressDSCPEntry

tNetworkIngressDSCPEntry 1.3.6.1.4.1.6527.3.1.2.16.5.2.1
Information about a dscp map for a network policy. Some default entries are created by the agent for the default network policy (1). These cannot be deleted or modified. Other entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNetworkIngressDSCPEntry  

tNetworkIngressDSCP 1.3.6.1.4.1.6527.3.1.2.16.5.2.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  TDSCPName  

tNetworkIngressDSCPRowStatus 1.3.6.1.4.1.6527.3.1.2.16.5.2.1.2
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tNetworkIngressDSCPFC 1.3.6.1.4.1.6527.3.1.2.16.5.2.1.3
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  TFCName  

tNetworkIngressDSCPProfile 1.3.6.1.4.1.6527.3.1.2.16.5.2.1.4
there is no DEFVAL for this object. it must be deliberately set before activating the row.
Status: current Access: read-create
OBJECT-TYPE    
  TProfile  

tNetworkIngressDSCPLastChanged 1.3.6.1.4.1.6527.3.1.2.16.5.2.1.5
timestamp of last change to this row in tNetworkIngressDSCPTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tNetworkIngressDot1pTable 1.3.6.1.4.1.6527.3.1.2.16.5.3
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TNetworkIngressDot1pEntry

tNetworkIngressDot1pEntry 1.3.6.1.4.1.6527.3.1.2.16.5.3.1
Information about a dot1p map for a network policy. Some default entries are created by the agent for the default network policy (1). These cannot be deleted or modified. Other entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNetworkIngressDot1pEntry  

tNetworkIngressDot1pValue 1.3.6.1.4.1.6527.3.1.2.16.5.3.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  Dot1PPriority 0..7  

tNetworkIngressDot1pRowStatus 1.3.6.1.4.1.6527.3.1.2.16.5.3.1.2
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tNetworkIngressDot1pFC 1.3.6.1.4.1.6527.3.1.2.16.5.3.1.3
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  TFCName  

tNetworkIngressDot1pProfile 1.3.6.1.4.1.6527.3.1.2.16.5.3.1.4
there is no DEFVAL for this object. It must be deliberately set before activating the row.
Status: current Access: read-create
OBJECT-TYPE    
  TDEProfileOrDei  

tNetworkIngressDot1pLastChanged 1.3.6.1.4.1.6527.3.1.2.16.5.3.1.5
timestamp of last change to this row in tNetworkIngressDot1pTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tNetworkIngressLSPEXPTable 1.3.6.1.4.1.6527.3.1.2.16.5.4
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TNetworkIngressLSPEXPEntry

tNetworkIngressLSPEXPEntry 1.3.6.1.4.1.6527.3.1.2.16.5.4.1
Information about LSP EXP mapping for a network policy. Some default entries are created by the agent for the default network policy (1). These cannot be deleted or modified. Other entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNetworkIngressLSPEXPEntry  

tNetworkIngressLSPEXP 1.3.6.1.4.1.6527.3.1.2.16.5.4.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  TLspExpValue 0..7  

tNetworkIngressLSPEXPRowStatus 1.3.6.1.4.1.6527.3.1.2.16.5.4.1.2
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tNetworkIngressLSPEXPFC 1.3.6.1.4.1.6527.3.1.2.16.5.4.1.3
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  TFCName  

tNetworkIngressLSPEXPProfile 1.3.6.1.4.1.6527.3.1.2.16.5.4.1.4
there is no DEFVAL for this object. it must be deliberately set before activating the row.
Status: current Access: read-create
OBJECT-TYPE    
  TProfile  

tNetworkIngressLSPEXPLastChanged 1.3.6.1.4.1.6527.3.1.2.16.5.4.1.5
timestamp of last change to this row in tNetworkIngressLSPEXPTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tNetworkEgressFCTable 1.3.6.1.4.1.6527.3.1.2.16.5.7
Information about all network policies' egress FC traffic disposition.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TNetworkEgressFCEntry

tNetworkEgressFCEntry 1.3.6.1.4.1.6527.3.1.2.16.5.7.1
Information about a particular network policy's egress per-forwarding-class traffic disposition. Entries are created/deleted as an action of creating/deleting a row in the tNetworkPolicyTable. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNetworkEgressFCEntry  

tNetworkEgressFCName 1.3.6.1.4.1.6527.3.1.2.16.5.7.1.1
the name of the forwarding class (FC).
Status: current Access: not-accessible
OBJECT-TYPE    
  TFCName  

tNetworkEgressFCDSCPInProfile 1.3.6.1.4.1.6527.3.1.2.16.5.7.1.2
the DSCP to use for in-profile traffic.
Status: current Access: read-write
OBJECT-TYPE    
  TDSCPNameOrEmpty  

tNetworkEgressFCDSCPOutProfile 1.3.6.1.4.1.6527.3.1.2.16.5.7.1.3
the DSCP to use for out-of-profile traffic.
Status: current Access: read-write
OBJECT-TYPE    
  TDSCPNameOrEmpty  

tNetworkEgressFCLspExpInProfile 1.3.6.1.4.1.6527.3.1.2.16.5.7.1.4
the lsp-exp value to use for in-profile traffic.
Status: current Access: read-write
OBJECT-TYPE    
  TLspExpValue  

tNetworkEgressFCLspExpOutProfile 1.3.6.1.4.1.6527.3.1.2.16.5.7.1.5
the lsp-exp value to use for out-of-profile traffic.
Status: current Access: read-write
OBJECT-TYPE    
  TLspExpValue  

tNetworkEgressFCDot1pInProfile 1.3.6.1.4.1.6527.3.1.2.16.5.7.1.6
the Dot1p to use for in-profile traffic.
Status: current Access: read-write
OBJECT-TYPE    
  Dot1PPriority  

tNetworkEgressFCDot1pOutProfile 1.3.6.1.4.1.6527.3.1.2.16.5.7.1.7
the Dot1p to use for out-of-profile traffic.
Status: current Access: read-write
OBJECT-TYPE    
  Dot1PPriority  

tNetworkEgressFCLastChanged 1.3.6.1.4.1.6527.3.1.2.16.5.7.1.8
timestamp of last change to this row in tNetworkEgressFCTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tNetworkEgressFCForceDEValue 1.3.6.1.4.1.6527.3.1.2.16.5.7.1.9
The value of tNetworkEgressFCForceDEValue specifies the DE value to set for network egress packets in this forwarding class regardless of profile status of the frames. An inconsistentValue error is returned if this object is set to any value other than '-1', when tNetworkEgressFCDEMark object is set to 'false'.
Status: current Access: read-write
OBJECT-TYPE    
  TDEValue  

tNetworkEgressFCDEMark 1.3.6.1.4.1.6527.3.1.2.16.5.7.1.10
The value of tNetworkEgressFCDEMark specifies whether to set DE value in the frames of this forwarding class. An inconsistentValue error is returned if this object is set to 'false' when tNetworkEgressFCForceDEValue object is not set to '-1'.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tNetworkEgressFCQGrpQueue 1.3.6.1.4.1.6527.3.1.2.16.5.7.1.11
tNetworkEgressFCQGrpQueue specifies the specific queue from queue-group TIMETRA-VRTR-MIB::vRtrIfQosQGrp to be used for packets in this forwarding class.
Status: current Access: read-write
OBJECT-TYPE    
  TEgressQueueId  

tNetworkEgressFCQGrpPolicer 1.3.6.1.4.1.6527.3.1.2.16.5.7.1.12
The value of tNetworkEgressFCQGrpPolicer specifies the policer from queue-group to be used for packets in this forwarding class.
Status: current Access: read-write
OBJECT-TYPE    
  TEgrPolicerIdOrNone  

tNetworkQueuePolicyTable 1.3.6.1.4.1.6527.3.1.2.16.6.1
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TNetworkQueuePolicyEntry

tNetworkQueuePolicyEntry 1.3.6.1.4.1.6527.3.1.2.16.6.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  TNetworkQueuePolicyEntry  

tNetworkQueuePolicy 1.3.6.1.4.1.6527.3.1.2.16.6.1.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

tNetworkQueuePolicyRowStatus 1.3.6.1.4.1.6527.3.1.2.16.6.1.1.2
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tNetworkQueuePolicyDescription 1.3.6.1.4.1.6527.3.1.2.16.6.1.1.3
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tNetworkQueuePolicyLastChanged 1.3.6.1.4.1.6527.3.1.2.16.6.1.1.8
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tNetworkQueuePolicyEHWrrPlcy 1.3.6.1.4.1.6527.3.1.2.16.6.1.1.9
The value of tNetworkQueuePolicyEHWrrPlcy specifies the Weighted Round Robin (WRR) policy to use on this HSMDA egress queue.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tNetworkQueuePolicyEHPktBOffst 1.3.6.1.4.1.6527.3.1.2.16.6.1.1.10
The value of tNetworkQueuePolicyEHPktBOffst specifies the packet byte offset to use for the HSMDA egress queues. This value is used for the adjustment to make to the size of each packet for HSMDA queue accounting.
Status: current Access: read-create
OBJECT-TYPE    
  TPerPacketOffset  

tNetworkQueueTable 1.3.6.1.4.1.6527.3.1.2.16.6.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TNetworkQueueEntry

tNetworkQueueEntry 1.3.6.1.4.1.6527.3.1.2.16.6.2.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  TNetworkQueueEntry  

tNetworkQueue 1.3.6.1.4.1.6527.3.1.2.16.6.2.1.1
The queue ID is used as the secondary index to the table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  TQueueId 1..16  

tNetworkQueueRowStatus 1.3.6.1.4.1.6527.3.1.2.16.6.2.1.2
Row Status of the entry. This allows creation/deletion of rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tNetworkQueuePoolName 1.3.6.1.4.1.6527.3.1.2.16.6.2.1.3
The tNetworkQueuePoolName specifies the pool that is associated with this network queue. If tNetworkQueuePoolName is empty, no pool has been associated with the queue.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tNetworkQueueParent 1.3.6.1.4.1.6527.3.1.2.16.6.2.1.4
The scheduler to which this queue would be feeding to.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tNetworkQueueLevel 1.3.6.1.4.1.6527.3.1.2.16.6.2.1.5
This specifies the level of priority while feeding to the parent.
Status: current Access: read-create
OBJECT-TYPE    
  TLevel  

tNetworkQueueWeight 1.3.6.1.4.1.6527.3.1.2.16.6.2.1.6
The weight that needs to be used by the scheduler to which this queue would be feeding to.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

tNetworkQueueCIRLevel 1.3.6.1.4.1.6527.3.1.2.16.6.2.1.7
This specifies the level of priority while feeding to the parent. The level '0' means treat all offered load for this queue as for the above CIR traffic.
Status: current Access: read-create
OBJECT-TYPE    
  TLevelOrDefault  

tNetworkQueueCIRWeight 1.3.6.1.4.1.6527.3.1.2.16.6.2.1.8
The weight that needs to be used until the committed rate by the scheduler to which this queue would be feeding to.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

tNetworkQueueMCast 1.3.6.1.4.1.6527.3.1.2.16.6.2.1.9
This object specifies if this is a multicast queue or not.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tNetworkQueueExpedite 1.3.6.1.4.1.6527.3.1.2.16.6.2.1.10
tNetworkQueueExpedite specifies the priority that this queue should be assigned by the hardware level schedulers. The value 'auto-expedited' implies that this attribute should be dynamically updated by looking at the forwarding classes mapping into this queue. In such a case the queue is treated as 'non-expedited' if there is even a single non-expedited forwarding class using this queue. This attribute is associated with the queue at the time of creation and cannot be modified thereafter.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER expedited(1), auto-expedited(2), non-expedited(3)  

tNetworkQueueCIR 1.3.6.1.4.1.6527.3.1.2.16.6.2.1.11
The percentage of max rate allowed.
Status: current Access: read-create
OBJECT-TYPE    
  TRatePercent  

tNetworkQueuePIR 1.3.6.1.4.1.6527.3.1.2.16.6.2.1.12
The percentage of max rate allowed.
Status: current Access: read-create
OBJECT-TYPE    
  TPIRRatePercent  

tNetworkQueueCBS 1.3.6.1.4.1.6527.3.1.2.16.6.2.1.13
The percentage of reserved buffer space for the queue, defined to two decimal places.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstHundredthsOfPercent  

tNetworkQueueMBS 1.3.6.1.4.1.6527.3.1.2.16.6.2.1.14
The percentage of reserved buffer space for the queue, defined to two decimal places.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstHundredthsOfPercent  

tNetworkQueueHiPrioOnly 1.3.6.1.4.1.6527.3.1.2.16.6.2.1.15
The percentage of buffer space for the queue, used exclusively by high priority packets.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstPercentOrDefault  

tNetworkQueueLastChanged 1.3.6.1.4.1.6527.3.1.2.16.6.2.1.16
The value of the object tNetworkQueueLastChanged indicates the timestamp of last change to this row in tNetworkQueueTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tNetworkQueueUsePortParent 1.3.6.1.4.1.6527.3.1.2.16.6.2.1.17
The value of the object tNetworkQueueUsePortParent specifies whether this queue is parented by a port-level scheduler. When the value is 'true', this network queue is parented by a port-level scheduler.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tNetworkQueuePortLvl 1.3.6.1.4.1.6527.3.1.2.16.6.2.1.18
The value of the object tNetworkQueuePortLvl specifies the port priority this queue will use to receive bandwidth from the port-level scheduler for its above-cir offered load.
Status: current Access: read-create
OBJECT-TYPE    
  TLevel  

tNetworkQueuePortWght 1.3.6.1.4.1.6527.3.1.2.16.6.2.1.19
The value of the object tNetworkQueuePortWght specifies the weight this queue will use to receive bandwidth from the port-level scheduler for its above-cir offered load.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

tNetworkQueuePortCIRLvl 1.3.6.1.4.1.6527.3.1.2.16.6.2.1.20
The value of the object tNetworkQueuePortCIRLvl specifies the port priority this queue will use to receive bandwidth from the port-level scheduler for its within-cir offered load.
Status: current Access: read-create
OBJECT-TYPE    
  TLevelOrDefault  

tNetworkQueuePortCIRWght 1.3.6.1.4.1.6527.3.1.2.16.6.2.1.21
The value of the object tNetworkQueuePortCIRWght specifies the weight this queue will use to receive bandwidth from the port-level scheduler for its within-cir offered load.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

tNetworkQueuePortAvgOverhead 1.3.6.1.4.1.6527.3.1.2.16.6.2.1.22
The value of tNetworkQueuePortAvgOverhead specifies the encapsulation overhead, in hundredths of a percent, used to translate packet-based rate to frame-based rate and vice versa.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..10000  

tNetworkQueueCIRAdaptation 1.3.6.1.4.1.6527.3.1.2.16.6.2.1.23
The value of tNetworkQueueCIRAdaptation specifies the adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational value while maintaining the minimum offset.
Status: current Access: read-create
OBJECT-TYPE    
  TAdaptationRule  

tNetworkQueuePIRAdaptation 1.3.6.1.4.1.6527.3.1.2.16.6.2.1.24
The value of tNetworkQueuePIRAdaptation specifies the adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational value while maintaining the minimum offset.
Status: current Access: read-create
OBJECT-TYPE    
  TAdaptationRule  

tNetworkQueueFCTable 1.3.6.1.4.1.6527.3.1.2.16.6.3
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TNetworkQueueFCEntry

tNetworkQueueFCEntry 1.3.6.1.4.1.6527.3.1.2.16.6.3.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  TNetworkQueueFCEntry  

tNetworkQueueFCName 1.3.6.1.4.1.6527.3.1.2.16.6.3.1.1
Forwarding class name.
Status: current Access: not-accessible
OBJECT-TYPE    
  TFCName  

tNetworkQueueFCRowStatus 1.3.6.1.4.1.6527.3.1.2.16.6.3.1.2
Row Status for this queue.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tNetworkQueueFC 1.3.6.1.4.1.6527.3.1.2.16.6.3.1.3
The specific queue to be used for packets in this forwarding class.
Status: current Access: read-create
OBJECT-TYPE    
  TQueueId 1..16  

tNetworkQueueFCMCast 1.3.6.1.4.1.6527.3.1.2.16.6.3.1.4
The specific multicast queue to be used for packets in this forwarding class. The queue is used only for specific entities and will be ignored wherever it is irrelevant.
Status: current Access: read-create
OBJECT-TYPE    
  TQueueId 1..16  

tNetworkQueueFCLastChanged 1.3.6.1.4.1.6527.3.1.2.16.6.3.1.7
timestamp of last change to this row in tNetworkQueueFCTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tNetworkQueueFCEgrHsmdaQueue 1.3.6.1.4.1.6527.3.1.2.16.6.3.1.8
The value of tNetworkQueueFCEgrHsmdaQueue specifies the egress hsmda queue to be used for packets in this forwarding class. This is only applicable on supported hsmda ports.
Status: current Access: read-create
OBJECT-TYPE    
  TQueueId 1..8  

tNetworkEgrHsmdaQueueTblLastChgd 1.3.6.1.4.1.6527.3.1.2.16.20.94
The value of tNetworkEgrHsmdaQueueTblLastChgd indicates the timestamp of last change to this row in tNetworkEgrHsmdaQueueTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tNetworkEgrHsmdaQueueTable 1.3.6.1.4.1.6527.3.1.2.16.6.4
The tNetworkEgrHsmdaQueueTable contains the information about all network egress policies on HSMDA queues. Entries in this table are created whenever a network queue policy is created in tNetworkQueuePolicyEntry.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TNetworkEgrHsmdaQueueEntry

tNetworkEgrHsmdaQueueEntry 1.3.6.1.4.1.6527.3.1.2.16.6.4.1
Each entry in tNetworkEgrHsmdaQueueEntry represents the information about a particular HSMDA queue for a network egress policy specified by tNetworkEgrHsmdaQueue.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNetworkEgrHsmdaQueueEntry  

tNetworkEgrHsmdaQueue 1.3.6.1.4.1.6527.3.1.2.16.6.4.1.1
The value of tNetworkEgrHsmdaQueue indicates the HSMDA queue ID used as the secondary index to the table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  TEgressHsmdaQueueId 1..8  

tNetworkEgrHsmdaQueuePIRPercent 1.3.6.1.4.1.6527.3.1.2.16.6.4.1.2
The value of tNetworkEgrHsmdaQueuePIRPercent specifies the queue's PIR expressed as a percentage of port line rate.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..10000  

tNetworkEgrHsmdaQueuePIRAdaptn 1.3.6.1.4.1.6527.3.1.2.16.6.4.1.3
The value of tNetworkEgrHsmdaQueuePIRAdaptn specifies the adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
Status: current Access: read-write
OBJECT-TYPE    
  TAdaptationRule  

tNetworkEgrHsmdaQueueWrrWeight 1.3.6.1.4.1.6527.3.1.2.16.6.4.1.4
The value of tNetworkEgrHsmdaQueueWrrWeight specifies the weight with which this queue should parent into the HSMDA scheduler, provided it is not superseded by the Weighted Round Robin (WRR) policy. The weight of each queue determines how much bandwidth that queue gets out of the total rate for the scheduling class.
Status: current Access: read-write
OBJECT-TYPE    
  THsmdaWrrWeight  

tNetworkEgrHsmdaQueueMBS 1.3.6.1.4.1.6527.3.1.2.16.6.4.1.5
The value of tNetworkEgrHsmdaQueueMBS specifies the maximum amount of buffer space, in bytes, allowed for this network egress HSMDA queue.
Status: current Access: read-write
OBJECT-TYPE    
  THSMDABurstSizeBytes  

tNetworkEgrHsmdaQueueSlopePolicy 1.3.6.1.4.1.6527.3.1.2.16.6.4.1.6
The value of tNetworkEgrHsmdaQueueSlopePolicy specifies the slope policy on this network egress HSMDA queue. The slope policy defines the WRED slope behavior for this queue.
Status: current Access: read-write
OBJECT-TYPE    
  TNamedItem  

tNetworkEgrHsmdaQueueLastChanged 1.3.6.1.4.1.6527.3.1.2.16.6.4.1.7
The value of tNetworkEgrHsmdaQueueLastChanged indicates the sysUpTime for the last change to this row.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tNetworkEgrHsmdaQueueBurstLimit 1.3.6.1.4.1.6527.3.1.2.16.6.4.1.8
The value of tNetworkEgrHsmdaQueueBurstLimit specifies the explicit shaping burst size of the queue.
Status: current Access: read-write
OBJECT-TYPE    
  THSMDAQueueBurstLimit  

tSharedQueuePolicyTable 1.3.6.1.4.1.6527.3.1.2.16.7.1
Defines the Alcatel-Lucent SROS series Shared Queue Policy Table for providing, via SNMP, the capability of defining the queue policies. tSharedQueuePolicyTable holds a list of all shared queue policies in the managed system. Shared queue policies should exist in this table before being referenced elsewhere. There is a default queue policy 'default' created by the agent and can not be deleted.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TSharedQueuePolicyEntry

tSharedQueuePolicyEntry 1.3.6.1.4.1.6527.3.1.2.16.7.1.1
Defines an entry in the tSharedQueuePolicyTable. Entries are created and deleted in this table by SNMP sets to tSharedQueuePolicyRowStatus.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSharedQueuePolicyEntry  

tSharedQueuePolicy 1.3.6.1.4.1.6527.3.1.2.16.7.1.1.1
tSharedQueuePolicy serves as an index and uniquely identifies a queue policy in the managed system.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

tSharedQueuePolicyRowStatus 1.3.6.1.4.1.6527.3.1.2.16.7.1.1.2
tSharedQueuePolicyRowStatus allows entries to be created and deleted in the tSharedQueuePolicyTable. The deletion of an entry in this table will fail if the action is performed on the default policy or the policy is being used within the system.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tSharedQueuePolicyLastChanged 1.3.6.1.4.1.6527.3.1.2.16.7.1.1.3
tSharedQueuePolicyLastChanged indicates the value of sysUpTime when the queue policy entry was last modified.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSharedQueuePolicyDescription 1.3.6.1.4.1.6527.3.1.2.16.7.1.1.4
tSharedQueuePolicyDescription specifies the user provided description string for this queue policy entry. It can consist of only the printable, seven-bit ASCII characters.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tSharedQueueTable 1.3.6.1.4.1.6527.3.1.2.16.7.2
Defines the Alcatel-Lucent SROS series Shared Queue Table for providing, via SNMP, the capability of defining the queues for the shared queue policies existing in the tSharedQueuePolicyTable. tSharedQueueTable holds a list of all the shared queues in the managed system defined for the queue policies. Queues should exist in this table before being referenced by the forwarding class mappings within the queue policy as defined in the tSharedQueueFCTable. There is a default queue with the queue identifier '1' which gets created automatically when a new queue policy is created.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TSharedQueueEntry

tSharedQueueEntry 1.3.6.1.4.1.6527.3.1.2.16.7.2.1
Defines an entry in the tSharedQueueTable. Entries are created/deleted in this table by SNMP sets to tSharedQueueRowStatus. An exception to this rule is the default queue. The default queue is created/deleted as a result of the creation/deletion of a new queue policy in the tSharedQueuePolicyTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSharedQueueEntry  

tSharedQueueId 1.3.6.1.4.1.6527.3.1.2.16.7.2.1.1
tSharedQueueId serves as the secondary index. When used in conjunction with tSharedQueuePolicy, it uniquely identifies a shared queue in the managed system.
Status: current Access: not-accessible
OBJECT-TYPE    
  TQueueId 1..32  

tSharedQueueRowStatus 1.3.6.1.4.1.6527.3.1.2.16.7.2.1.2
tSharedQueueRowStatus allows entries to be created and deleted in the tSharedQueueTable. The deletion of an entry in this table will fail if the action is performed on the default queue or if the queue is being referenced by a forwarding class mapping in the queue policy.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tSharedQueueLastChanged 1.3.6.1.4.1.6527.3.1.2.16.7.2.1.3
tSharedQueueLastChanged indicates the value of sysUpTime when the queue entry was last modified.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSharedQueuePoolName 1.3.6.1.4.1.6527.3.1.2.16.7.2.1.4
tSharedQueuePoolName specifies the pool from which the queue should be allocating its buffer. By default it will share the default pool being used by the entity where the queue is instantiated.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tSharedQueueParent 1.3.6.1.4.1.6527.3.1.2.16.7.2.1.5
tSharedQueueParent specifies the scheduler to which this queue should be feeding into. By default there would be no parent for the queue and it will be controlled by the entity where the queue is instantiated.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tSharedQueueLevel 1.3.6.1.4.1.6527.3.1.2.16.7.2.1.6
tSharedQueueLevel specifies the level of priority to be used by the parent entity to compute the priority of this queue when the traffic is exceeding the committed rate.
Status: current Access: read-create
OBJECT-TYPE    
  TLevel  

tSharedQueueWeight 1.3.6.1.4.1.6527.3.1.2.16.7.2.1.7
tSharedQueueWeight specifies the weight that this queue should be assigned by the parent among all the entities feeding into the parent with the same level when the traffic is exceeding the committed rate.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

tSharedQueueCIRLevel 1.3.6.1.4.1.6527.3.1.2.16.7.2.1.8
tSharedQueueCIRLevel specifies the level of priority to be used by the parent entity to compute the priority of this queue when the traffic is conforming to the committed rate. The level '0' means treat all offered load for this queue same as the load which is exceeding the committed rate.
Status: current Access: read-create
OBJECT-TYPE    
  TLevelOrDefault  

tSharedQueueCIRWeight 1.3.6.1.4.1.6527.3.1.2.16.7.2.1.9
tSharedQueueCIRWeight specifies the weight that this queue should be assigned by the parent among all the entities feeding into the parent with the same level when the traffic is conforming to the committed rate.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

tSharedQueueExpedite 1.3.6.1.4.1.6527.3.1.2.16.7.2.1.10
tSharedQueueExpedite specifies the priority that this queue should be assigned by the hardware level schedulers. The value 'auto-expedited' implies that this attribute should be dynamically updated by looking at the forwarding classes mapping into this queue. In such a case the queue is treated as 'non-expedited' if there is even a single non-expedited forwarding class using this queue.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER expedited(1), auto-expedited(2), non-expedited(3)  

tSharedQueueCIR 1.3.6.1.4.1.6527.3.1.2.16.7.2.1.11
tSharedQueueCIR specifies the committed rate as a percentage of maximum rate for this queue.
Status: current Access: read-create
OBJECT-TYPE    
  TRatePercent  

tSharedQueuePIR 1.3.6.1.4.1.6527.3.1.2.16.7.2.1.12
tSharedQueuePIR specifies the peak rate as a percentage of maximum rate for this queue.
Status: current Access: read-create
OBJECT-TYPE    
  TPIRRatePercent  

tSharedQueueCBS 1.3.6.1.4.1.6527.3.1.2.16.7.2.1.13
tSharedQueueCBS specifies the committed burst size as a percentage of maximum reserved buffer space for the queue.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstPercent  

tSharedQueueMBS 1.3.6.1.4.1.6527.3.1.2.16.7.2.1.14
tSharedQueueMBS specifies the maximum burst size as a percentage of maximum reserved buffer space for the queue.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstPercent  

tSharedQueueHiPrioOnly 1.3.6.1.4.1.6527.3.1.2.16.7.2.1.15
tSharedQueueHiPrioOnly specifies the percentage of buffer space to be exclusively by high priority packets as a percentage of maximum reserved buffer space for the queue.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstPercentOrDefault  

tSharedQueueIsMultipoint 1.3.6.1.4.1.6527.3.1.2.16.7.2.1.16
The value of tSharedQueueIsMultipoint specifies whether this shared queue is a multipoint-shared queue. This object can only be modified at row creation time; any attempt to set it after creation is silently ignored.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tSharedQueueFCTable 1.3.6.1.4.1.6527.3.1.2.16.7.3
Defines the Alcatel-Lucent SROS series forwarding class to shared queue mapping table for providing, via SNMP, the capability of defining the forwarding class to shared queue mapping for the queue policies existing in the tSharedQueuePolicyTable. tSharedQueueFCTable holds a list of forwarding class to queue mappings managed system defined for the queue policies. The forwarding classes which are not existing in this table should use the default shared queue for this policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TSharedQueueFCEntry

tSharedQueueFCEntry 1.3.6.1.4.1.6527.3.1.2.16.7.3.1
Defines an entry in the tSharedQueueFCTable. Entries are created/deleted in this table by SNMP sets to tSharedQueueFCRowStatus.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSharedQueueFCEntry  

tSharedQueueFCName 1.3.6.1.4.1.6527.3.1.2.16.7.3.1.1
tSharedQueueFCName serves as the secondary index. When used in conjunction with tSharedQueuePolicy, it uniquely identifies a forwarding class to queue mapping in the managed system.
Status: current Access: not-accessible
OBJECT-TYPE    
  TFCName  

tSharedQueueFCRowStatus 1.3.6.1.4.1.6527.3.1.2.16.7.3.1.2
tSharedQueueFCRowStatus allows entries to be created and deleted in the tSharedQueueFCTable. Deletion of an entry from this table will cause the forwarding class to use the default mapping.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tSharedQueueFCLastChanged 1.3.6.1.4.1.6527.3.1.2.16.7.3.1.3
tSharedQueueFCLastChanged indicates the value of sysUpTime when the forwarding class to queue mapping entry was last modified.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSharedQueueFCQueue 1.3.6.1.4.1.6527.3.1.2.16.7.3.1.4
tSharedQueueFCQueue specifies the logical queue that the traffic classified into this forwarding class should use.
Status: current Access: read-create
OBJECT-TYPE    
  TQueueId 1..8  

tSharedQueueFCMCastQueue 1.3.6.1.4.1.6527.3.1.2.16.7.3.1.5
The value of tSharedQueueFCMCastQueue specifies the logical queue that mutlticast traffic classified into this forwarding class should use.
Status: current Access: read-create
OBJECT-TYPE    
  TQueueId 9..32  

tSharedQueueFCBCastQueue 1.3.6.1.4.1.6527.3.1.2.16.7.3.1.6
The value of tSharedQueueFCBCastQueue specifies the logical queue that broadscast traffic classified into this forwarding class should use.
Status: current Access: read-create
OBJECT-TYPE    
  TQueueId 9..32  

tSharedQueueFCUnknownQueue 1.3.6.1.4.1.6527.3.1.2.16.7.3.1.7
The value of tSharedQueueFCUnknownQueue specifies the logical queue that unknown traffic classified into this forwarding class should use.
Status: current Access: read-create
OBJECT-TYPE    
  TQueueId 9..32  

tQosIngQGroupTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.6
tQosIngQGroupTableLastChanged indicates the timestamp of last change to the tQosIngQGroupTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tQosIngQGroupTable 1.3.6.1.4.1.6527.3.1.2.16.7.4
tQosIngQGroupTable defines Ingress Queue Group Table for providing, via SNMP, the capability of defining the queue groups for the queues existing in the tQosIngQueueTable. tQosIngQGroupTable holds a list of all the queue-groups in the managed system defined. Queue-groups should exist in this table before being referenced by the forwarding class mappings within the queue policy as defined in the tSapIngressFCTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TQosIngQGroupEntry

tQosIngQGroupEntry 1.3.6.1.4.1.6527.3.1.2.16.7.4.1
tQosIngQGroupEntry defines an entry in the tQosIngQGroupTable. Entries are created/deleted in this table by SNMP sets to tQosIngQGroupRowStatus.
Status: current Access: not-accessible
OBJECT-TYPE    
  TQosIngQGroupEntry  

tQosIngQGroupName 1.3.6.1.4.1.6527.3.1.2.16.7.4.1.1
tQosIngQGroupName defines the Ingress Queue Group name. It uniquely identifies an ingress queue group in the managed system.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

tQosIngQGroupRowStatus 1.3.6.1.4.1.6527.3.1.2.16.7.4.1.2
tQosIngQGroupRowStatus allows entries to be created and deleted in the tQosIngQGroupTable. The deletion of an entry in this table will fail if the queue is being referenced by a forwarding class mapping in the queue policy.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tQosIngQGroupLastChanged 1.3.6.1.4.1.6527.3.1.2.16.7.4.1.3
tQosIngQGroupLastChanged indicates the value of sysUpTime when the queue entry was last modified.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tQosIngQGroupDescr 1.3.6.1.4.1.6527.3.1.2.16.7.4.1.4
tQosIngQGroupDescr specifies the description of the queue-group.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tQosIngQTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.7
tQosIngQTableLastChanged indicates the timestamp of last change to the tQosIngQueueTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tQosIngQueueTable 1.3.6.1.4.1.6527.3.1.2.16.7.5
tQosIngQueueTable defines all ingress queues.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TQosIngQueueEntry

tQosIngQueueEntry 1.3.6.1.4.1.6527.3.1.2.16.7.5.1
tQosIngQueueEntry defines a particular ingress queue. Entries are created by user by setting tQosIngQueueRowStatus.
Status: current Access: not-accessible
OBJECT-TYPE    
  TQosIngQueueEntry  

tQosIngQueue 1.3.6.1.4.1.6527.3.1.2.16.7.5.1.1
tQosIngQueue specifies the queue ID which is used as the secondary index to the table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  TIngressQueueId 1..32  

tQosIngQueueRowStatus 1.3.6.1.4.1.6527.3.1.2.16.7.5.1.2
tQosIngQueueRowStatus is the Row-Status of the entry. This allows creation/deletion of rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tQosIngQueueParent 1.3.6.1.4.1.6527.3.1.2.16.7.5.1.3
tQosIngQueueParent specifies the scheduler to which this queue would be feeding.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tQosIngQueueLevel 1.3.6.1.4.1.6527.3.1.2.16.7.5.1.4
tQosIngQueueLevel specifies the level of priority while feeding the parent.
Status: current Access: read-create
OBJECT-TYPE    
  TLevel  

tQosIngQueueWeight 1.3.6.1.4.1.6527.3.1.2.16.7.5.1.5
tQosIngQueueWeight specifies the weight that needs to be used by the scheduler to which this queue would be feeding.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

tQosIngQueueCIRLevel 1.3.6.1.4.1.6527.3.1.2.16.7.5.1.6
tQosIngQueueCIRLevel specifies the level of priority while feeding to the parent. The level '0' means treat all offered load for this queue as for the above CIR traffic.
Status: current Access: read-create
OBJECT-TYPE    
  TLevelOrDefault  

tQosIngQueueCIRWeight 1.3.6.1.4.1.6527.3.1.2.16.7.5.1.7
tQosIngQueueCIRWeight specifies the weight that needs to be used until the committed rate by the scheduler to which this queue would be feeding.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

tQosIngQueueMCast 1.3.6.1.4.1.6527.3.1.2.16.7.5.1.8
tQosIngQueueMCast specifies if this is a multicast queue.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tQosIngQueueExpedite 1.3.6.1.4.1.6527.3.1.2.16.7.5.1.9
tQosIngQueueExpedite specifies the priority that this queue should be assigned by the hardware level schedulers. This attribute is associated with the queue at the time of creation and cannot be modified thereafter.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER expedited(1), bestEffort(3)  

tQosIngQueueCBS 1.3.6.1.4.1.6527.3.1.2.16.7.5.1.10
tQosIngQueueCBS specifies the amount of reserved buffer space for the queue.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstSize  

tQosIngQueueMBS 1.3.6.1.4.1.6527.3.1.2.16.7.5.1.11
tQosIngQueueMBS specifies the maximum amount of buffer space allowed for the queue. This object has been replaced with tQosIngQueueMBSBytes object.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TBurstSize  

tQosIngQueueHiPrioOnly 1.3.6.1.4.1.6527.3.1.2.16.7.5.1.12
tQosIngQueueHiPrioOnly specifies the percentage of buffer space for the queue, used exclusively by high priority packets.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstPercentOrDefault  

tQosIngQueuePIRAdaptation 1.3.6.1.4.1.6527.3.1.2.16.7.5.1.13
tQosIngQueuePIRAdaptation specifies the adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
Status: current Access: read-create
OBJECT-TYPE    
  TAdaptationRule  

tQosIngQueueCIRAdaptation 1.3.6.1.4.1.6527.3.1.2.16.7.5.1.14
tQosIngQueueCIRAdaptation specifies the adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
Status: current Access: read-create
OBJECT-TYPE    
  TAdaptationRule  

tQosIngQueueAdminPIR 1.3.6.1.4.1.6527.3.1.2.16.7.5.1.15
tQosIngQueueAdminPIR specifies the administrative PIR specified by the user.
Status: current Access: read-create
OBJECT-TYPE    
  TPIRRate  

tQosIngQueueAdminCIR 1.3.6.1.4.1.6527.3.1.2.16.7.5.1.16
tQosIngQueueAdminCIR specifies the administrative CIR specified by the user.
Status: current Access: read-create
OBJECT-TYPE    
  TCIRRate  

tQosIngQueueLastChanged 1.3.6.1.4.1.6527.3.1.2.16.7.5.1.17
tQosIngQueueLastChanged specifies the timestamp of last change to this row in tQosIngQueueTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tQosIngQueuePoliced 1.3.6.1.4.1.6527.3.1.2.16.7.5.1.18
tQosIngQueuePoliced specifies that the out of profile traffic feeding into the physical queue instance should be dropped. tQosIngQueuePoliced overrides the bandwidth specified by the object tQosIngQueueAdminCIR.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tQosIngQueueMode 1.3.6.1.4.1.6527.3.1.2.16.7.5.1.19
tQosIngQueueMode specifies the mode in which the queue is operating. This attribute is associated with the queue at the time of creation and cannot be modified thereafter.
Status: current Access: read-create
OBJECT-TYPE    
  TQueueMode  

tQosIngQueuePoolName 1.3.6.1.4.1.6527.3.1.2.16.7.5.1.20
tQosIngQueuePoolName specifies the name of the pool to be applied for the ingress queue.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tQosIngQueueMBSBytes 1.3.6.1.4.1.6527.3.1.2.16.7.5.1.21
tQosIngQueueMBSBytes specifies the maximum amount of buffer space allowed for the queue.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstSizeBytes  

tQosIngQueueBurstLimit 1.3.6.1.4.1.6527.3.1.2.16.7.5.1.22
The value of tQosIngQueueBurstLimit specifies the explicit shaping burst size of a queue.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstLimit  

tQosIngQueueAdvCfgPolicy 1.3.6.1.4.1.6527.3.1.2.16.7.5.1.23
The value of tQosIngQueueAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this queue.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tQosEgrQGroupTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.8
tQosEgrQGroupTableLastChanged indicates the timestamp of last change to the tQosEgrQGroupTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tQosEgrQGroupTable 1.3.6.1.4.1.6527.3.1.2.16.7.6
tQosEgrQGroupTable defines the Ingress Queue Group Table for providing, via SNMP, the capability of defining the queue groups for the queues existing in the tQosEgrQueueTable. tQosEgrQGroupTable holds a list of all the queue-groups in the managed system defined. Queue-groups should exist in this table before being referenced by the forwarding class mappings within the queue policy as defined in the tSapIngressFCTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TQosEgrQGroupEntry

tQosEgrQGroupEntry 1.3.6.1.4.1.6527.3.1.2.16.7.6.1
tQosEgrQGroupEntry defines an entry in the tQosEgrQGroupTable. Entries are created/deleted in this table by SNMP sets to tQosEgrQGroupRowStatus.
Status: current Access: not-accessible
OBJECT-TYPE    
  TQosEgrQGroupEntry  

tQosEgrQGroupName 1.3.6.1.4.1.6527.3.1.2.16.7.6.1.1
tQosEgrQGroupName defines the Ingress Queue Group name. It uniquely identifies an ingress queue group in the managed system.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

tQosEgrQGroupRowStatus 1.3.6.1.4.1.6527.3.1.2.16.7.6.1.2
tQosEgrQGroupRowStatus allows entries to be created and deleted in the tQosEgrQGroupTable. The deletion of an entry in this table will fail if the queue is being referenced by a forwarding class mapping in the queue policy.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tQosEgrQGroupLastChanged 1.3.6.1.4.1.6527.3.1.2.16.7.6.1.3
tQosEgrQGroupLastChanged indicates the value of sysUpTime when the queue entry was last modified.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tQosEgrQGroupDescr 1.3.6.1.4.1.6527.3.1.2.16.7.6.1.4
tQosEgrQGroupDescr specifies the description of the queue-group.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tQosEgrQTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.9
tQosEgrQTableLastChanged indicates the timestamp of last change to the tQosEgrQueueTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tQosEgrQueueTable 1.3.6.1.4.1.6527.3.1.2.16.7.7
tQosEgrQueueTable defines all egress queues.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TQosEgrQueueEntry

tQosEgrQueueEntry 1.3.6.1.4.1.6527.3.1.2.16.7.7.1
tQosEgrQueueEntry defines a particular egress queue. Entries are created and deleted by user.
Status: current Access: not-accessible
OBJECT-TYPE    
  TQosEgrQueueEntry  

tQosEgrQueue 1.3.6.1.4.1.6527.3.1.2.16.7.7.1.1
The value of tQosEgrQueue identifies the queue index which is used as the second index to the table entry. Zero is not allowed.
Status: current Access: not-accessible
OBJECT-TYPE    
  TEgressQueueId 1..8  

tQosEgrQueueRowStatus 1.3.6.1.4.1.6527.3.1.2.16.7.7.1.2
This is the Row Status of the entry. This allows creation/deletion of rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tQosEgrQueueParent 1.3.6.1.4.1.6527.3.1.2.16.7.7.1.3
The value of tQosEgrQueueParent specifies the scheduler to which this queue would be feeding.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tQosEgrQueueLevel 1.3.6.1.4.1.6527.3.1.2.16.7.7.1.4
The value of tQosEgrQueueLevel specifies the level of priority while feeding the parent.
Status: current Access: read-create
OBJECT-TYPE    
  TLevel  

tQosEgrQueueWeight 1.3.6.1.4.1.6527.3.1.2.16.7.7.1.5
The value of tQosEgrQueueWeight specifies the weight that needs to be used by the scheduler to which this queue would be feeding.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

tQosEgrQueueCIRLevel 1.3.6.1.4.1.6527.3.1.2.16.7.7.1.6
The value of tQosEgrQueueCIRLevel specifies the level of priority while feeding the parent. The level '0' means treat all offered load for this queue as for the above CIR traffic.
Status: current Access: read-create
OBJECT-TYPE    
  TLevelOrDefault  

tQosEgrQueueCIRWeight 1.3.6.1.4.1.6527.3.1.2.16.7.7.1.7
The value of tQosEgrQueueCIRWeight specifies the weight that needs to be used until the committed rate by the scheduler to which this queue would be feeding.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

tQosEgrQueueExpedite 1.3.6.1.4.1.6527.3.1.2.16.7.7.1.8
The value of tQosEgrQueueExpedite specifies the priority that this queue should be assigned by the hardware level schedulers.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER expedited(1), bestEffort(3)  

tQosEgrQueueCBS 1.3.6.1.4.1.6527.3.1.2.16.7.7.1.9
The value of tQosEgrQueueCBS specifies the amount of reserved buffer space for the queue.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstSize  

tQosEgrQueueMBS 1.3.6.1.4.1.6527.3.1.2.16.7.7.1.10
The value of tQosEgrQueueMBS specifies the maximum amount of buffer space allowed for the queue. This object has been replaced with tQosEgrQueueMBSBytes object.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TBurstSize  

tQosEgrQueueHiPrioOnly 1.3.6.1.4.1.6527.3.1.2.16.7.7.1.11
The value of tQosEgrQueueHiPrioOnly specifies the percentage of buffer space for the queue, used exclusively by high priority packets.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstPercentOrDefault  

tQosEgrQueuePIRAdaptation 1.3.6.1.4.1.6527.3.1.2.16.7.7.1.12
The value of tQosEgrQueuePIRAdaptation specifies the adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
Status: current Access: read-create
OBJECT-TYPE    
  TAdaptationRule  

tQosEgrQueueCIRAdaptation 1.3.6.1.4.1.6527.3.1.2.16.7.7.1.13
The value of tQosEgrQueueCIRAdaptation specifies the adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
Status: current Access: read-create
OBJECT-TYPE    
  TAdaptationRule  

tQosEgrQueueAdminPIR 1.3.6.1.4.1.6527.3.1.2.16.7.7.1.14
The value of tQosEgrQueueAdminPIR specifies the administrative PIR. An 'inconsistentValue' error is returned if tQosEgrQueueAdminPIR is set to non-default value when the object tQosEgrQueueRateType is set to 'percent'.
Status: current Access: read-create
OBJECT-TYPE    
  TPIRRate  

tQosEgrQueueAdminCIR 1.3.6.1.4.1.6527.3.1.2.16.7.7.1.15
The value of tQosEgrQueueAdminCIR specifies the administrative CIR. An 'inconsistentValue' error is returned if tQosEgrQueueAdminCIR is set to non-default value when the object tQosEgrQueueRateType is set to 'percent'.
Status: current Access: read-create
OBJECT-TYPE    
  TCIRRate  

tQosEgrQueueLastChanged 1.3.6.1.4.1.6527.3.1.2.16.7.7.1.18
The value of tQosEgrQueueLastChanged indicates the timestamp of last change to this row in tQosEgrQueueTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tQosEgrQueueUsePortParent 1.3.6.1.4.1.6527.3.1.2.16.7.7.1.19
The value of tQosEgrQueueUsePortParent specifies whether this queue is parented by a port-level scheduler. When the value is 'true', this SAP egress queue is parented by a port-level scheduler. This object is mutually exclusive with tQosEgrQueueParent. Only one kind of parent is allowed.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tQosEgrQueuePortLvl 1.3.6.1.4.1.6527.3.1.2.16.7.7.1.20
The value of the object tQosEgrQueuePortLvl specifies the port priority this queue will use to receive bandwidth from the port-level scheduler for its above-cir offered load.
Status: current Access: read-create
OBJECT-TYPE    
  TLevel  

tQosEgrQueuePortWght 1.3.6.1.4.1.6527.3.1.2.16.7.7.1.21
The value of the object tQosEgrQueuePortWght specifies the weight this queue will use to receive bandwidth from the port-level scheduler for its above-cir offered load.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

tQosEgrQueuePortCIRLvl 1.3.6.1.4.1.6527.3.1.2.16.7.7.1.22
The value of the object tQosEgrQueuePortCIRLvl specifies the port priority this queue will use to receive bandwidth from the port-level scheduler for its within-cir offered load.
Status: current Access: read-create
OBJECT-TYPE    
  TLevelOrDefault  

tQosEgrQueuePortCIRWght 1.3.6.1.4.1.6527.3.1.2.16.7.7.1.23
The value of the object tQosEgrQueuePortCIRWght specifies the weight this queue will use to receive bandwidth from the port-level scheduler for its within-cir offered load.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

tQosEgrQueuePoolName 1.3.6.1.4.1.6527.3.1.2.16.7.7.1.24
The value of tQosEgrQueuePoolName specifies the name of the pool to be applied for SAP egress queue.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tQosEgrQueueXPWredQ 1.3.6.1.4.1.6527.3.1.2.16.7.7.1.25
The value of tQosEgrQueueXPWredQ specifies whether to alter the generic pool association of the queue for the purpose of allowing queue-specific WRED slopes with minimal provisioning.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tQosEgrQueueXPWredQSlope 1.3.6.1.4.1.6527.3.1.2.16.7.7.1.26
The value of tQosEgrQueueXPWredQSlope specifies the name of the slope-policy to be applied for QOS egress queue. When tQosEgrQueueXPWredQ has the value 'false', an 'inconsistentValue' error is returned if an attempt is made to set this object to a value other than 'default'.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItem  

tQosEgrQueueMBSBytes 1.3.6.1.4.1.6527.3.1.2.16.7.7.1.27
The value of tQosEgrQueueMBSBytes specifies the maximum amount of buffer space allowed for the queue.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstSizeBytes  

tQosEgrQueueAdminPIRPercent 1.3.6.1.4.1.6527.3.1.2.16.7.7.1.28
The value of tQosEgrQueueAdminPIRPercent specifies the administrative PIR percentage, in hudredths of a percent. An 'inconsistentValue' error is returned if tQosEgrQueueAdminPIRPercent is set to non-default value when the object tQosEgrQueueRateType is set to 'kbps'.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..10000  

tQosEgrQueueAdminCIRPercent 1.3.6.1.4.1.6527.3.1.2.16.7.7.1.29
The value of tQosEgrQueueAdminCIRPercent specifies the administrative CIR percentage, in hudredths of a percent. An 'inconsistentValue' error is returned if tQosEgrQueueAdminCIRPercent is set to non-default value when the object tQosEgrQueueRateType is set to 'kbps'.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..10000  

tQosEgrQueueRateType 1.3.6.1.4.1.6527.3.1.2.16.7.7.1.30
The value of tQosEgrQueueRateType specifies the type of Egress queue rate. When the value of the object is set to 'kbps', the egresss queue rates are specified in kbps. The objects tQosEgrQueueAdminCIRPercent and tQosEgrQueueAdminPIRPercent will be set to their default values. When the value of the object is set to 'percent', the egress queue rates are specified in percentage. The objects tQosEgrQueueAdminCIR and tQosEgrQueueAdminPIR will be set to their default values.
Status: current Access: read-create
OBJECT-TYPE    
  TRateType  

tQosEgrQueueBurstLimit 1.3.6.1.4.1.6527.3.1.2.16.7.7.1.31
The value of tQosEgrQueueBurstLimit specifies the explicit shaping burst size of a queue.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstLimit  

tQosEgrQueueAdvCfgPolicy 1.3.6.1.4.1.6527.3.1.2.16.7.7.1.32
The value of tQosEgrQueueAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this queue.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tQosEgrQueuePktOffset 1.3.6.1.4.1.6527.3.1.2.16.7.7.1.33
The value of tQosEgrQueuePktOffset specifies the packet byte offset to be applied with this queue.
Status: current Access: read-create
OBJECT-TYPE    
  TPerPacketOffset  

tQosEgrQGroupFCTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.90
The value of tQosEgrQGroupFCTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tQosEgrQGroupFCTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tQosEgrQGroupFCTable 1.3.6.1.4.1.6527.3.1.2.16.7.8
This table maintains the information of forwarding classes in a egress queue group.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TQosEgrQGroupFCEntry

tQosEgrQGroupFCEntry 1.3.6.1.4.1.6527.3.1.2.16.7.8.1
Information about a particular queue group's forwarding class.
Status: current Access: not-accessible
OBJECT-TYPE    
  TQosEgrQGroupFCEntry  

tQosEgrQGroupFCName 1.3.6.1.4.1.6527.3.1.2.16.7.8.1.1
The value of the object tQosEgrQGroupFCName specifies the name of the forwarding class
Status: current Access: not-accessible
OBJECT-TYPE    
  TFCName  

tQosEgrQGroupFCRowStatus 1.3.6.1.4.1.6527.3.1.2.16.7.8.1.2
The value of tQosEgrQGroupFCRowStatus specifies the Row Status for this entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tQosEgrQGroupFCLastChanged 1.3.6.1.4.1.6527.3.1.2.16.7.8.1.3
The value of tQosEgrQGroupFCLastChanged indicates the timestamp of last change to this row in tQosEgrQGroupFCTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tQosEgrQGroupFCQueue 1.3.6.1.4.1.6527.3.1.2.16.7.8.1.4
The value of tQosEgrQGroupFCQueue specifies the queue to be used for the packets in this forwarding class.
Status: current Access: read-create
OBJECT-TYPE    
  TEgressQueueId  

tSlopePolicyTable 1.3.6.1.4.1.6527.3.1.2.16.10.1
Slope Policy Table. Each entry in this table defines the RED slopes for the high and the low priority traffic.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TSlopePolicyEntry

tSlopePolicyEntry 1.3.6.1.4.1.6527.3.1.2.16.10.1.1
Slope Policy Entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSlopePolicyEntry  

tSlopePolicy 1.3.6.1.4.1.6527.3.1.2.16.10.1.1.1
tSlopePolicy maintains the name of the slope policy identifying the policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

tSlopeRowStatus 1.3.6.1.4.1.6527.3.1.2.16.10.1.1.2
Row Status of the entry. This allows creation/deletion of rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tSlopeDescription 1.3.6.1.4.1.6527.3.1.2.16.10.1.1.3
User-provided description of the policy.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tSlopeHiAdminStatus 1.3.6.1.4.1.6527.3.1.2.16.10.1.1.4
tSlopeHiAdminStatus specifies the admin state for the high priority RED slope. If the tSlopeHiAdminStatus is set to 'down', the RED slope is inactive.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER up(1), down(2)  

tSlopeHiStartAverage 1.3.6.1.4.1.6527.3.1.2.16.10.1.1.5
The percentage of the buffer utilized after which the drop probability starts to rise above 0.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..100  

tSlopeHiMaxAverage 1.3.6.1.4.1.6527.3.1.2.16.10.1.1.6
The percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..100  

tSlopeHiMaxProbability 1.3.6.1.4.1.6527.3.1.2.16.10.1.1.7
The drop probability increases steadily from 0 at the tSlopeHiStartAverage upto the tSlopeHiMaxProbability at the tSlopeHiMaxAverage.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..100  

tSlopeLoAdminStatus 1.3.6.1.4.1.6527.3.1.2.16.10.1.1.8
tSlopeLoAdminStatus specifies the admin state for the high priority RED slope. If the tSlopeLoAdminStatus is set to 'down', the RED slope is inactive.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER up(1), down(2)  

tSlopeLoStartAverage 1.3.6.1.4.1.6527.3.1.2.16.10.1.1.9
The percentage of the buffer utilized after which the drop probability starts to rise above 0.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..100  

tSlopeLoMaxAverage 1.3.6.1.4.1.6527.3.1.2.16.10.1.1.10
The percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..100  

tSlopeLoMaxProbability 1.3.6.1.4.1.6527.3.1.2.16.10.1.1.11
The drop probability increases steadily from 0 at the tSlopeLoStartAverage upto the tSlopeLoMaxProbability at the tSlopeLoMaxAverage.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..100  

tSlopeTimeAvgFactor 1.3.6.1.4.1.6527.3.1.2.16.10.1.1.12
The time average factor describes the weighting between the previous shared buffer average utilization result and the new shared buffer utilization in determining the new shared buffer average utilization.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..15  

tSlopeLastChanged 1.3.6.1.4.1.6527.3.1.2.16.10.1.1.13
Timestamp of when this entry was last changed.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tHsmdaSlopePolicyTable 1.3.6.1.4.1.6527.3.1.2.16.10.2
The tHsmdaSlopePolicyTable has an entry for each HSMDA slope policy configured on this system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    THsmdaSlopePolicyEntry

tHsmdaSlopePolicyEntry 1.3.6.1.4.1.6527.3.1.2.16.10.2.1
Each row represents a particular HSMDA slope policy. Entries are created and deleted by the user.
Status: current Access: not-accessible
OBJECT-TYPE    
  THsmdaSlopePolicyEntry  

tHsmdaSlopePolicyName 1.3.6.1.4.1.6527.3.1.2.16.10.2.1.1
The value of tHsmdaSlopePolicyName specifies the name of the HSMDA slope policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

tHsmdaSlopePolicyRowStatus 1.3.6.1.4.1.6527.3.1.2.16.10.2.1.2
The value of tHsmdaSlopePolicyRowStatus is used for the creation and deletion of HSMDA slope policies.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tHsmdaSlopeLastChanged 1.3.6.1.4.1.6527.3.1.2.16.10.2.1.3
The value of tHsmdaSlopeLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tHsmdaSlopeDescription 1.3.6.1.4.1.6527.3.1.2.16.10.2.1.4
The value of tHsmdaSlopeDescription specifies the description of this HSMDA slope policy.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tHsmdaSlopeQueueMbs 1.3.6.1.4.1.6527.3.1.2.16.10.2.1.5
The value of tHsmdaSlopeQueueMbs specifies the maximum amount of buffer space, in bytes, allowed for any HSMDA queue associated with this HSMDA slope policy. Specifying a value of 0 effectively disables all queues associated with this slope policy causing each queue to discard all packets. This object is obsoleted in 10.0 Release.
Status: obsolete Access: read-create
OBJECT-TYPE    
  Unsigned32 0..500000  

tHsmdaSlopeHiAdminStatus 1.3.6.1.4.1.6527.3.1.2.16.10.2.1.6
The value of tHsmdaSlopeHiAdminStatus specifies the admin state for the high priority RED slope. If the tHsmdaSlopeHiAdminStatus is set to 'disabled', the RED slope is inactive.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxEnabledDisabled  

tHsmdaSlopeHiStartDepth 1.3.6.1.4.1.6527.3.1.2.16.10.2.1.7
The value of tHsmdaSlopeHiStartDepth specifies the percentage of the buffer utilized after which the drop probability starts to rise above 0.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..10000  

tHsmdaSlopeHiMaxDepth 1.3.6.1.4.1.6527.3.1.2.16.10.2.1.8
The value of tHsmdaSlopeHiMaxDepth specifies the percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..10000  

tHsmdaSlopeHiMaxProbability 1.3.6.1.4.1.6527.3.1.2.16.10.2.1.9
The value of tHsmdaSlopeHiMaxProbability specifies the drop probability, as a percentage, when the Hsmda queue depth reaches tHsmdaSlopeHiMaxDepth. The drop increases steadily from 0 at the tHsmdaSlopeHiStartDepth up to the tHsmdaSlopeHiMaxProbability at the tHsmdaSlopeHiMaxDepth.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..10000  

tHsmdaSlopeLoAdminStatus 1.3.6.1.4.1.6527.3.1.2.16.10.2.1.10
The value of tHsmdaSlopeLoAdminStatus specifies the admin state for the low priority RED slope. If the tHsmdaSlopeLoAdminStatus is set to 'disabled', the RED slope is inactive.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxEnabledDisabled  

tHsmdaSlopeLoStartDepth 1.3.6.1.4.1.6527.3.1.2.16.10.2.1.11
The value of tHsmdaSlopeLoStartDepth specifies the percentage of the buffer utilized after which the drop probability starts to rise above 0.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..10000  

tHsmdaSlopeLoMaxDepth 1.3.6.1.4.1.6527.3.1.2.16.10.2.1.12
The value of tHsmdaSlopeLoMaxDepth specifies the percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..10000  

tHsmdaSlopeLoMaxProbability 1.3.6.1.4.1.6527.3.1.2.16.10.2.1.13
The value of tHsmdaSlopeLoMaxProbability specifies the drop probability, as a percentage, when the Hsmda queue depth reaches tHsmdaSlopeLoMaxDepth. The drop increases steadily from 0 at the tHsmdaSlopeLoStartDepth up to the tHsmdaSlopeLoMaxProbability at the tHsmdaSlopeLoMaxDepth.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..10000  

tSchedulerPolicyTable 1.3.6.1.4.1.6527.3.1.2.16.12.1
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TSchedulerPolicyEntry

tSchedulerPolicyEntry 1.3.6.1.4.1.6527.3.1.2.16.12.1.1
Information about a particular Scheduler Policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSchedulerPolicyEntry  

tSchedulerPolicyName 1.3.6.1.4.1.6527.3.1.2.16.12.1.1.1
Name of the scheduler policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

tSchedulerPolicyRowStatus 1.3.6.1.4.1.6527.3.1.2.16.12.1.1.2
Row Status of the entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tSchedulerPolicyDescription 1.3.6.1.4.1.6527.3.1.2.16.12.1.1.3
Description for the scheduler policy
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tSchedulerPolicyLastChanged 1.3.6.1.4.1.6527.3.1.2.16.12.1.1.4
timestamp of last change to this row in tSchedulerPolicyTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSchedulerPolicyFrameBasedAccnt 1.3.6.1.4.1.6527.3.1.2.16.12.1.1.5
The value of tSchedulerPolicyFrameBasedAccnt specifies whether to use frame-based accounting for the schedulers within the scheduler policy and the children queues parented to the scheduling policy. If the value is 'false', the default packet-based accounting method will be used.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tVirtualSchedulerTable 1.3.6.1.4.1.6527.3.1.2.16.12.2
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TVirtualSchedulerEntry

tVirtualSchedulerEntry 1.3.6.1.4.1.6527.3.1.2.16.12.2.1
Information about a particular Scheduler belonging to a Scheduler Policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  TVirtualSchedulerEntry  

tVirtualSchedulerTier 1.3.6.1.4.1.6527.3.1.2.16.12.2.1.1
Tier to which this scheduler belongs to.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..3  

tVirtualSchedulerName 1.3.6.1.4.1.6527.3.1.2.16.12.2.1.2
Name of the scheduler policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

tVirtualSchedulerRowStatus 1.3.6.1.4.1.6527.3.1.2.16.12.2.1.3
Row Status of the entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tVirtualSchedulerDescription 1.3.6.1.4.1.6527.3.1.2.16.12.2.1.4
Description for the scheduler policy
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tVirtualSchedulerParent 1.3.6.1.4.1.6527.3.1.2.16.12.2.1.5
The scheduler to which this scheduler would be feeding.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tVirtualSchedulerLevel 1.3.6.1.4.1.6527.3.1.2.16.12.2.1.6
This specifies the level of priority while feeding the parent.
Status: current Access: read-create
OBJECT-TYPE    
  TLevel  

tVirtualSchedulerWeight 1.3.6.1.4.1.6527.3.1.2.16.12.2.1.7
The weight that needs to be used by the scheduler to which this queue would be feeding.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

tVirtualSchedulerCIRLevel 1.3.6.1.4.1.6527.3.1.2.16.12.2.1.8
This specifies the level of priority while feeding the parent. The level '0' means treat all offered load for this queue as for the above CIR traffic.
Status: current Access: read-create
OBJECT-TYPE    
  TLevelOrDefault  

tVirtualSchedulerCIRWeight 1.3.6.1.4.1.6527.3.1.2.16.12.2.1.9
The weight that needs to be used until the committed rate by the scheduler to which this queue would be feeding.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

tVirtualSchedulerPIR 1.3.6.1.4.1.6527.3.1.2.16.12.2.1.10
The rate allowed for this scheduler. A value of -1 implies maximum.
Status: current Access: read-create
OBJECT-TYPE    
  THPolVirtualSchePIRRate  

tVirtualSchedulerCIR 1.3.6.1.4.1.6527.3.1.2.16.12.2.1.11
The rate allowed for this scheduler. A value of -1 implies maximum.
Status: current Access: read-create
OBJECT-TYPE    
  THPolVirtualScheCIRRate  

tVirtualSchedulerSummedCIR 1.3.6.1.4.1.6527.3.1.2.16.12.2.1.12
tVirtualSchedulerSummedCIR specifies if the CIR should be used as the summed value of the children. If set to 'true', tVirtualSchedulerCIR loses its meaning.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tVirtualSchedulerLastChanged 1.3.6.1.4.1.6527.3.1.2.16.12.2.1.13
The value of the object tVirtualSchedulerLastChanged indicates the timestamp of last change to this row in tVirtualSchedulerTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tVirtualSchedulerUsePortParent 1.3.6.1.4.1.6527.3.1.2.16.12.2.1.14
The value of the object tVirtualSchedulerUsePortParent specifies whether this scheduler is parented by a port-level scheduler. When the value is 'true', this virtual scheduler is parented by a port-level scheduler. This object is mutually exclusive with tVirtualSchedulerParent. Only one kind of parent is allowed.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tVirtualSchedulerPortLvl 1.3.6.1.4.1.6527.3.1.2.16.12.2.1.15
The value of the object tVirtualSchedulerPortLvl specifies the port priority this scheduler will use to receive bandwidth from the port-level scheduler for its above-cir offered load.
Status: current Access: read-create
OBJECT-TYPE    
  TLevel  

tVirtualSchedulerPortWght 1.3.6.1.4.1.6527.3.1.2.16.12.2.1.16
The value of the object tVirtualSchedulerPortWght specifies the weight this scheduler will use to receive bandwidth from the port-level scheduler for its above-cir offered load.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

tVirtualSchedulerPortCIRLvl 1.3.6.1.4.1.6527.3.1.2.16.12.2.1.17
The value of the object tVirtualSchedulerPortCIRLvl specifies the port priority this scheduler will use to receive bandwidth from the port-level scheduler for its within-cir offered load.
Status: current Access: read-create
OBJECT-TYPE    
  TLevelOrDefault  

tVirtualSchedulerPortCIRWght 1.3.6.1.4.1.6527.3.1.2.16.12.2.1.18
The value of the object tVirtualSchedulerPortCIRWght specifies the weight this scheduler will use to receive bandwidth from the port-level scheduler for its within-cir offered load.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

tPortSchedulerPlcyTable 1.3.6.1.4.1.6527.3.1.2.16.12.3
The tPortSchedulerPlcyTable has an entry for each port scheduler configured on this system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TPortSchedulerPlcyEntry

tPortSchedulerPlcyEntry 1.3.6.1.4.1.6527.3.1.2.16.12.3.1
Each row represents a particular port scheduler. Entries are created and deleted by the user.
Status: current Access: not-accessible
OBJECT-TYPE    
  TPortSchedulerPlcyEntry  

tPortSchedulerPlcyName 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.1
The value of tPortSchedulerPlcyName specifies the name of the port scheduler.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

tPortSchedulerPlcyRowStatus 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.2
The value of tPortSchedulerPlcyRowStatus is used for the creation and deletion of port scheduler policies.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tPortSchedulerPlcyDescription 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.3
The value of tPortSchedulerPlcyDescription specifies the description of this port scheduler.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tPortSchedulerPlcyLastChanged 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.4
The value of tPortSchedulerPlcyLastChanged indicates the value of sysUpTime at the time of the most recent management change to this row.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tPortSchedulerPlcyMaxRate 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.5
The value of tPortSchedulerPlcyMaxRate specifies the explicit maximum frame based bandwidth limit of this port scheduler.
Status: current Access: read-create
OBJECT-TYPE    
  TPortSchedulerPIRRate  

tPortSchedulerPlcyLvl1PIR 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.6
The value of tPortSchedulerPlcyLvl1PIR specifies the total bandwidth limit, PIR, for priority level 1.
Status: current Access: read-create
OBJECT-TYPE    
  TPortSchedulerPIRRate  

tPortSchedulerPlcyLvl1CIR 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.7
The value of tPortSchedulerPlcyLvl1CIR specifies the within-cir bandwidth limit for priority level 1.
Status: current Access: read-create
OBJECT-TYPE    
  TPortSchedulerCIR  

tPortSchedulerPlcyLvl2PIR 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.8
The value of tPortSchedulerPlcyLvl2PIR specifies the total bandwidth limit, PIR, for priority level 2.
Status: current Access: read-create
OBJECT-TYPE    
  TPortSchedulerPIRRate  

tPortSchedulerPlcyLvl2CIR 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.9
The value of tPortSchedulerPlcyLvl2CIR specifies the within-cir bandwidth limit for priority level 2.
Status: current Access: read-create
OBJECT-TYPE    
  TPortSchedulerCIR  

tPortSchedulerPlcyLvl3PIR 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.10
The value of tPortSchedulerPlcyLvl3PIR specifies the total bandwidth limit, PIR, for priority level 3.
Status: current Access: read-create
OBJECT-TYPE    
  TPortSchedulerPIRRate  

tPortSchedulerPlcyLvl3CIR 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.11
The value of tPortSchedulerPlcyLvl3CIR specifies the within-cir bandwidth limit for priority level 3.
Status: current Access: read-create
OBJECT-TYPE    
  TPortSchedulerCIR  

tPortSchedulerPlcyLvl4PIR 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.12
The value of tPortSchedulerPlcyLvl4PIR specifies the total bandwidth limit, PIR, for priority level 4.
Status: current Access: read-create
OBJECT-TYPE    
  TPortSchedulerPIRRate  

tPortSchedulerPlcyLvl4CIR 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.13
The value of tPortSchedulerPlcyLvl4CIR specifies the within-cir bandwidth limit for priority level 4.
Status: current Access: read-create
OBJECT-TYPE    
  TPortSchedulerCIR  

tPortSchedulerPlcyLvl5PIR 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.14
The value of tPortSchedulerPlcyLvl5PIR specifies the total bandwidth limit, PIR, for priority level 5.
Status: current Access: read-create
OBJECT-TYPE    
  TPortSchedulerPIRRate  

tPortSchedulerPlcyLvl5CIR 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.15
The value of tPortSchedulerPlcyLvl5CIR specifies the within-cir bandwidth limit for priority level 5.
Status: current Access: read-create
OBJECT-TYPE    
  TPortSchedulerCIR  

tPortSchedulerPlcyLvl6PIR 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.16
The value of tPortSchedulerPlcyLvl6PIR specifies the total bandwidth limit, PIR, for priority level 6.
Status: current Access: read-create
OBJECT-TYPE    
  TPortSchedulerPIRRate  

tPortSchedulerPlcyLvl6CIR 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.17
The value of tPortSchedulerPlcyLvl6CIR specifies the within-cir bandwidth limit for priority level 6.
Status: current Access: read-create
OBJECT-TYPE    
  TPortSchedulerCIR  

tPortSchedulerPlcyLvl7PIR 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.18
The value of tPortSchedulerPlcyLvl7PIR specifies the total bandwidth limit, PIR, for priority level 7.
Status: current Access: read-create
OBJECT-TYPE    
  TPortSchedulerPIRRate  

tPortSchedulerPlcyLvl7CIR 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.19
The value of tPortSchedulerPlcyLvl7CIR specifies the within-cir bandwidth limit for priority level 7.
Status: current Access: read-create
OBJECT-TYPE    
  TPortSchedulerCIR  

tPortSchedulerPlcyLvl8PIR 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.20
The value of tPortSchedulerPlcyLvl8PIR specifies the total bandwidth limit, PIR, for priority level 8.
Status: current Access: read-create
OBJECT-TYPE    
  TPortSchedulerPIRRate  

tPortSchedulerPlcyLvl8CIR 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.21
The value of tPortSchedulerPlcyLvl8CIR specifies the within-cir bandwidth limit for priority level 8.
Status: current Access: read-create
OBJECT-TYPE    
  TPortSchedulerCIR  

tPortSchedulerPlcyOrphanLvl 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.22
The value of tPortSchedulerPlcyOrphanLvl specifies the port priority of orphaned queues and schedulers that are above-cir.
Status: current Access: read-create
OBJECT-TYPE    
  TLevel  

tPortSchedulerPlcyOrphanWeight 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.23
The value of tPortSchedulerPlcyOrphanWeight specifies the weight of orphaned queues and schedulers that are above-cir.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

tPortSchedulerPlcyOrphanCIRLvl 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.24
The value of tPortSchedulerPlcyOrphanCIRLvl specifies the port priority of orphaned queues and schedulers that are within-cir.
Status: current Access: read-create
OBJECT-TYPE    
  TLevelOrDefault  

tPortSchedulerPlcyOrphanCIRWght 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.25
The value of tPortSchedulerPlcyOrphanCIRWght specifies the weight of orphaned queues and schedulers that are within-cir.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

tHsmdaSchedulerPlcyTable 1.3.6.1.4.1.6527.3.1.2.16.12.4
The tHsmdaSchedulerPlcyTable has an entry for each HSMDA scheduler policy configured on this system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    THsmdaSchedulerPlcyEntry

tHsmdaSchedulerPlcyEntry 1.3.6.1.4.1.6527.3.1.2.16.12.4.1
Each row represents a particular HSMDA scheduler policy. Entries are created and deleted by the user.
Status: current Access: not-accessible
OBJECT-TYPE    
  THsmdaSchedulerPlcyEntry  

tHsmdaSchedulerPlcyName 1.3.6.1.4.1.6527.3.1.2.16.12.4.1.1
The value of tHsmdaSchedulerPlcyName specifies the name of the HSMDA scheduler policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

tHsmdaSchedulerPlcyRowStatus 1.3.6.1.4.1.6527.3.1.2.16.12.4.1.2
The value of tHsmdaSchedulerPlcyRowStatus is used for the creation and deletion of HSMDA scheduler policies.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tHsmdaSchedulerPlcyDescription 1.3.6.1.4.1.6527.3.1.2.16.12.4.1.3
The value of tHsmdaSchedulerPlcyDescription specifies the description of this HSMDA scheduling policy.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tHsmdaSchedulerPlcyMaxRate 1.3.6.1.4.1.6527.3.1.2.16.12.4.1.4
The value of tHsmdaSchedulerPlcyMaxRate specifies the explicit maximum frame based bandwidth limit, in megabits per second, of this HSMDA scheduler policy.
Status: current Access: read-create
OBJECT-TYPE    
  THsmdaPIRMRate  

tHsmdaSchedulerPlcyLvl1Rate 1.3.6.1.4.1.6527.3.1.2.16.12.4.1.5
The value of tHsmdaSchedulerPlcyLvl1Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for this HSMDA scheduler policy level. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl1GrpId. Setting tHsmdaSchedulerPlcyLvl1Rate to any value (including default) while tHsmdaSchedulerPlcyLvl1GrpId is non-default, results in the level being removed from the group, tHsmdaSchedulerPlcyLvl1GrpId being set to default, and tHsmdaSchedulerPlcyLvl1WgtInGrp being set to default.
Status: current Access: read-create
OBJECT-TYPE    
  THsmdaPIRMRate  

tHsmdaSchedulerPlcyLvl1GrpId 1.3.6.1.4.1.6527.3.1.2.16.12.4.1.6
The value of tHsmdaSchedulerPlcyLvl1GrpId specifies the group this HSMDA scheduler policy level belongs to. If the value is '0', this level is not assigned to a scheduler policy group. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl1Rate. Setting tHsmdaSchedulerPlcyLvl1GrpId to non-default value while tHsmdaSchedulerPlcyLvl1Rate is non-default, results in the level being added to the group and tHsmdaSchedulerPlcyLvl1Rate being set to default. Setting tHsmdaSchedulerPlcyLvl1GrpId to default value results in the level being removed from any group and tHsmdaSchedulerPlcyLvl1WgtInGrp being set to default.
Status: current Access: read-create
OBJECT-TYPE    
  THsmdaSchedulerPolicyGroupId  

tHsmdaSchedulerPlcyLvl1WgtInGrp 1.3.6.1.4.1.6527.3.1.2.16.12.4.1.7
The value of tHsmdaSchedulerPlcyLvl1WgtInGrp specifies the weight the HSMDA scheduler policy should apply to this policy level within the group it belongs to. The value of tHsmdaSchedulerPlcyLvl1WgtInGrp will only be used if this policy level has been assigned to a group by setting tHsmdaSchedulerPlcyLvl1GrpId to a non-zero value. The value of tHsmdaSchedulerPlcyLvl1WgtInGrp is only allowed to be non-default when tHsmdaSchedulerPlcyLvl1GrpId is non-default.
Status: current Access: read-create
OBJECT-TYPE    
  THsmdaWeight  

tHsmdaSchedulerPlcyLvl2Rate 1.3.6.1.4.1.6527.3.1.2.16.12.4.1.8
The value of tHsmdaSchedulerPlcyLvl2Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for this HSMDA scheduler policy level. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl2GrpId. Setting tHsmdaSchedulerPlcyLvl2Rate to any value (including default) while tHsmdaSchedulerPlcyLvl2GrpId is non-default, results in the level being removed from the group, tHsmdaSchedulerPlcyLvl2GrpId being set to default, and tHsmdaSchedulerPlcyLvl2WgtInGrp being set to default.
Status: current Access: read-create
OBJECT-TYPE    
  THsmdaPIRMRate  

tHsmdaSchedulerPlcyLvl2GrpId 1.3.6.1.4.1.6527.3.1.2.16.12.4.1.9
The value of tHsmdaSchedulerPlcyLvl2GrpId specifies the group this HSMDA scheduler policy level belongs to. If the value is '0', this level is not assigned to a scheduler policy group. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl2Rate. Setting tHsmdaSchedulerPlcyLvl2GrpId to non-default value while tHsmdaSchedulerPlcyLvl2Rate is non-default, results in the level being added to the group and tHsmdaSchedulerPlcyLvl2Rate being set to default. Setting tHsmdaSchedulerPlcyLvl2GrpId to default value results in the level being removed from any group and tHsmdaSchedulerPlcyLvl2WgtInGrp being set to default.
Status: current Access: read-create
OBJECT-TYPE    
  THsmdaSchedulerPolicyGroupId  

tHsmdaSchedulerPlcyLvl2WgtInGrp 1.3.6.1.4.1.6527.3.1.2.16.12.4.1.10
The value of tHsmdaSchedulerPlcyLvl2WgtInGrp specifies the weight the HSMDA scheduler policy should apply to this policy level within the group it belongs to. The value of tHsmdaSchedulerPlcyLvl2WgtInGrp will only be used if this policy level has been assigned to a group by setting tHsmdaSchedulerPlcyLvl2GrpId to a non-zero value. The value of tHsmdaSchedulerPlcyLvl2WgtInGrp is only allowed to be non-default when tHsmdaSchedulerPlcyLvl2GrpId is non-default.
Status: current Access: read-create
OBJECT-TYPE    
  THsmdaWeight  

tHsmdaSchedulerPlcyLvl3Rate 1.3.6.1.4.1.6527.3.1.2.16.12.4.1.11
The value of tHsmdaSchedulerPlcyLvl3Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for this HSMDA scheduler policy level. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl3GrpId. Setting tHsmdaSchedulerPlcyLvl3Rate to any value (including default) while tHsmdaSchedulerPlcyLvl3GrpId is non-default, results in the level being removed from the group, tHsmdaSchedulerPlcyLvl3GrpId being set to default, and tHsmdaSchedulerPlcyLvl3WgtInGrp being set to default.
Status: current Access: read-create
OBJECT-TYPE    
  THsmdaPIRMRate  

tHsmdaSchedulerPlcyLvl3GrpId 1.3.6.1.4.1.6527.3.1.2.16.12.4.1.12
The value of tHsmdaSchedulerPlcyLvl3GrpId specifies the group this HSMDA scheduler policy level belongs to. If the value is '0', this level is not assigned to a scheduler policy group. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl3Rate. Setting tHsmdaSchedulerPlcyLvl3GrpId to non-default value while tHsmdaSchedulerPlcyLvl3Rate is non-default, results in the level being added to the group and tHsmdaSchedulerPlcyLvl3Rate being set to default. Setting tHsmdaSchedulerPlcyLvl3GrpId to default value results in the level being removed from any group and tHsmdaSchedulerPlcyLvl3WgtInGrp being set to default.
Status: current Access: read-create
OBJECT-TYPE    
  THsmdaSchedulerPolicyGroupId  

tHsmdaSchedulerPlcyLvl3WgtInGrp 1.3.6.1.4.1.6527.3.1.2.16.12.4.1.13
The value of tHsmdaSchedulerPlcyLvl3WgtInGrp specifies the weight the HSMDA scheduler policy should apply to this policy level within the group it belongs to. The value of tHsmdaSchedulerPlcyLvl3WgtInGrp will only be used if this policy level has been assigned to a group by setting tHsmdaSchedulerPlcyLvl3GrpId to a non-zero value. The value of tHsmdaSchedulerPlcyLvl3WgtInGrp is only allowed to be non-default when tHsmdaSchedulerPlcyLvl3GrpId is non-default.
Status: current Access: read-create
OBJECT-TYPE    
  THsmdaWeight  

tHsmdaSchedulerPlcyLvl4Rate 1.3.6.1.4.1.6527.3.1.2.16.12.4.1.14
The value of tHsmdaSchedulerPlcyLvl4Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for this HSMDA scheduler policy level. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl4GrpId. Setting tHsmdaSchedulerPlcyLvl4Rate to any value (including default) while tHsmdaSchedulerPlcyLvl4GrpId is non-default, results in the level being removed from the group, tHsmdaSchedulerPlcyLvl4GrpId being set to default, and tHsmdaSchedulerPlcyLvl4WgtInGrp being set to default.
Status: current Access: read-create
OBJECT-TYPE    
  THsmdaPIRMRate  

tHsmdaSchedulerPlcyLvl4GrpId 1.3.6.1.4.1.6527.3.1.2.16.12.4.1.15
The value of tHsmdaSchedulerPlcyLvl4GrpId specifies the group this HSMDA scheduler policy level belongs to. If the value is '0', this level is not assigned to a scheduler policy group. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl4Rate. Setting tHsmdaSchedulerPlcyLvl4GrpId to non-default value while tHsmdaSchedulerPlcyLvl4Rate is non-default, results in the level being added to the group and tHsmdaSchedulerPlcyLvl4Rate being set to default. Setting tHsmdaSchedulerPlcyLvl4GrpId to default value results in the level being removed from any group and tHsmdaSchedulerPlcyLvl4WgtInGrp being set to default.
Status: current Access: read-create
OBJECT-TYPE    
  THsmdaSchedulerPolicyGroupId  

tHsmdaSchedulerPlcyLvl4WgtInGrp 1.3.6.1.4.1.6527.3.1.2.16.12.4.1.16
The value of tHsmdaSchedulerPlcyLvl4WgtInGrp specifies the weight the HSMDA scheduler policy should apply to this policy level within the group it belongs to. The value of tHsmdaSchedulerPlcyLvl4WgtInGrp will only be used if this policy level has been assigned to a group by setting tHsmdaSchedulerPlcyLvl4GrpId to a non-zero value. The value of tHsmdaSchedulerPlcyLvl4WgtInGrp is only allowed to be non-default when tHsmdaSchedulerPlcyLvl4GrpId is non-default.
Status: current Access: read-create
OBJECT-TYPE    
  THsmdaWeight  

tHsmdaSchedulerPlcyLvl5Rate 1.3.6.1.4.1.6527.3.1.2.16.12.4.1.17
The value of tHsmdaSchedulerPlcyLvl5Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for this HSMDA scheduler policy level. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl5GrpId. Setting tHsmdaSchedulerPlcyLvl5Rate to any value (including default) while tHsmdaSchedulerPlcyLvl5GrpId is non-default, results in the level being removed from the group, tHsmdaSchedulerPlcyLvl5GrpId being set to default, and tHsmdaSchedulerPlcyLvl5WgtInGrp being set to default.
Status: current Access: read-create
OBJECT-TYPE    
  THsmdaPIRMRate  

tHsmdaSchedulerPlcyLvl5GrpId 1.3.6.1.4.1.6527.3.1.2.16.12.4.1.18
The value of tHsmdaSchedulerPlcyLvl5GrpId specifies the group this HSMDA scheduler policy level belongs to. If the value is '0', this level is not assigned to a scheduler policy group. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl5Rate. Setting tHsmdaSchedulerPlcyLvl5GrpId to non-default value while tHsmdaSchedulerPlcyLvl5Rate is non-default, results in the level being added to the group and tHsmdaSchedulerPlcyLvl5Rate being set to default. Setting tHsmdaSchedulerPlcyLvl5GrpId to default value results in the level being removed from any group and tHsmdaSchedulerPlcyLvl5WgtInGrp being set to default.
Status: current Access: read-create
OBJECT-TYPE    
  THsmdaSchedulerPolicyGroupId  

tHsmdaSchedulerPlcyLvl5WgtInGrp 1.3.6.1.4.1.6527.3.1.2.16.12.4.1.19
The value of tHsmdaSchedulerPlcyLvl5WgtInGrp specifies the weight the HSMDA scheduler policy should apply to this policy level within the group it belongs to. The value of tHsmdaSchedulerPlcyLvl5WgtInGrp will only be used if this policy level has been assigned to a group by setting tHsmdaSchedulerPlcyLvl5GrpId to a non-zero value. The value of tHsmdaSchedulerPlcyLvl5WgtInGrp is only allowed to be non-default when tHsmdaSchedulerPlcyLvl5GrpId is non-default.
Status: current Access: read-create
OBJECT-TYPE    
  THsmdaWeight  

tHsmdaSchedulerPlcyLvl6Rate 1.3.6.1.4.1.6527.3.1.2.16.12.4.1.20
The value of tHsmdaSchedulerPlcyLvl6Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for this HSMDA scheduler policy level. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl6GrpId. Setting tHsmdaSchedulerPlcyLvl6Rate to any value (including default) while tHsmdaSchedulerPlcyLvl6GrpId is non-default, results in the level being removed from the group, tHsmdaSchedulerPlcyLvl6GrpId being set to default, and tHsmdaSchedulerPlcyLvl6WgtInGrp being set to default.
Status: current Access: read-create
OBJECT-TYPE    
  THsmdaPIRMRate  

tHsmdaSchedulerPlcyLvl6GrpId 1.3.6.1.4.1.6527.3.1.2.16.12.4.1.21
The value of tHsmdaSchedulerPlcyLvl6GrpId specifies the group this HSMDA scheduler policy level belongs to. If the value is '0', this level is not assigned to a scheduler policy group. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl6Rate. Setting tHsmdaSchedulerPlcyLvl6GrpId to non-default value while tHsmdaSchedulerPlcyLvl6Rate is non-default, results in the level being added to the group and tHsmdaSchedulerPlcyLvl6Rate being set to default. Setting tHsmdaSchedulerPlcyLvl6GrpId to default value results in the level being removed from any group and tHsmdaSchedulerPlcyLvl6WgtInGrp being set to default.
Status: current Access: read-create
OBJECT-TYPE    
  THsmdaSchedulerPolicyGroupId  

tHsmdaSchedulerPlcyLvl6WgtInGrp 1.3.6.1.4.1.6527.3.1.2.16.12.4.1.22
The value of tHsmdaSchedulerPlcyLvl6WgtInGrp specifies the weight the HSMDA scheduler policy should apply to this policy level within the group it belongs to. The value of tHsmdaSchedulerPlcyLvl6WgtInGrp will only be used if this policy level has been assigned to a group by setting tHsmdaSchedulerPlcyLvl6GrpId to a non-zero value. The value of tHsmdaSchedulerPlcyLvl6WgtInGrp is only allowed to be non-default when tHsmdaSchedulerPlcyLvl6GrpId is non-default.
Status: current Access: read-create
OBJECT-TYPE    
  THsmdaWeight  

tHsmdaSchedulerPlcyLvl7Rate 1.3.6.1.4.1.6527.3.1.2.16.12.4.1.23
The value of tHsmdaSchedulerPlcyLvl7Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for this HSMDA scheduler policy level. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl7GrpId. Setting tHsmdaSchedulerPlcyLvl7Rate to any value (including default) while tHsmdaSchedulerPlcyLvl7GrpId is non-default, results in the level being removed from the group, tHsmdaSchedulerPlcyLvl7GrpId being set to default, and tHsmdaSchedulerPlcyLvl7WgtInGrp being set to default.
Status: current Access: read-create
OBJECT-TYPE    
  THsmdaPIRMRate  

tHsmdaSchedulerPlcyLvl7GrpId 1.3.6.1.4.1.6527.3.1.2.16.12.4.1.24
The value of tHsmdaSchedulerPlcyLvl7GrpId specifies the group this HSMDA scheduler policy level belongs to. If the value is '0', this level is not assigned to a scheduler policy group. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl7Rate. Setting tHsmdaSchedulerPlcyLvl7GrpId to non-default value while tHsmdaSchedulerPlcyLvl7Rate is non-default, results in the level being added to the group and tHsmdaSchedulerPlcyLvl7Rate being set to default. Setting tHsmdaSchedulerPlcyLvl7GrpId to default value results in the level being removed from any group and tHsmdaSchedulerPlcyLvl7WgtInGrp being set to default.
Status: current Access: read-create
OBJECT-TYPE    
  THsmdaSchedulerPolicyGroupId  

tHsmdaSchedulerPlcyLvl7WgtInGrp 1.3.6.1.4.1.6527.3.1.2.16.12.4.1.25
The value of tHsmdaSchedulerPlcyLvl7WgtInGrp specifies the weight the HSMDA scheduler policy should apply to this policy level within the group it belongs to. The value of tHsmdaSchedulerPlcyLvl7WgtInGrp will only be used if this policy level has been assigned to a group by setting tHsmdaSchedulerPlcyLvl7GrpId to a non-zero value. The value of tHsmdaSchedulerPlcyLvl7WgtInGrp is only allowed to be non-default when tHsmdaSchedulerPlcyLvl7GrpId is non-default.
Status: current Access: read-create
OBJECT-TYPE    
  THsmdaWeight  

tHsmdaSchedulerPlcyLvl8Rate 1.3.6.1.4.1.6527.3.1.2.16.12.4.1.26
The value of tHsmdaSchedulerPlcyLvl8Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for this HSMDA scheduler policy level. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl8GrpId. Setting tHsmdaSchedulerPlcyLvl8Rate to any value (including default) while tHsmdaSchedulerPlcyLvl8GrpId is non-default, results in the level being removed from the group, tHsmdaSchedulerPlcyLvl8GrpId being set to default, and tHsmdaSchedulerPlcyLvl8WgtInGrp being set to default.
Status: current Access: read-create
OBJECT-TYPE    
  THsmdaPIRMRate  

tHsmdaSchedulerPlcyLvl8GrpId 1.3.6.1.4.1.6527.3.1.2.16.12.4.1.27
The value of tHsmdaSchedulerPlcyLvl8GrpId specifies the group this HSMDA scheduler policy level belongs to. If the value is '0', this level is not assigned to a scheduler policy group. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl8Rate. Setting tHsmdaSchedulerPlcyLvl8GrpId to non-default value while tHsmdaSchedulerPlcyLvl8Rate is non-default, results in the level being added to the group and tHsmdaSchedulerPlcyLvl8Rate being set to default. Setting tHsmdaSchedulerPlcyLvl8GrpId to default value results in the level being removed from any group and tHsmdaSchedulerPlcyLvl8WgtInGrp being set to default.
Status: current Access: read-create
OBJECT-TYPE    
  THsmdaSchedulerPolicyGroupId  

tHsmdaSchedulerPlcyLvl8WgtInGrp 1.3.6.1.4.1.6527.3.1.2.16.12.4.1.28
The value of tHsmdaSchedulerPlcyLvl8WgtInGrp specifies the weight the HSMDA scheduler policy should apply to this policy level within the group it belongs to. The value of tHsmdaSchedulerPlcyLvl8WgtInGrp will only be used if this policy level has been assigned to a group by setting tHsmdaSchedulerPlcyLvl8GrpId to a non-zero value. The value of tHsmdaSchedulerPlcyLvl8WgtInGrp is only allowed to be non-default when tHsmdaSchedulerPlcyLvl8GrpId is non-default.
Status: current Access: read-create
OBJECT-TYPE    
  THsmdaWeight  

tHsmdaSchedulerPlcyLastChanged 1.3.6.1.4.1.6527.3.1.2.16.12.4.1.29
The value of tHsmdaSchedulerPlcyLastChanged indicates the timestamp of last change to this row in tHsmdaSchedulerPlcyTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tHsmdaSchedulerPlcyGrp1Rate 1.3.6.1.4.1.6527.3.1.2.16.12.4.1.30
The value of tHsmdaSchedulerPlcyGrp1Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for group 1 for this HSMDA scheduler policy group.
Status: current Access: read-create
OBJECT-TYPE    
  THsmdaPIRMRate  

tHsmdaSchedulerPlcyGrp2Rate 1.3.6.1.4.1.6527.3.1.2.16.12.4.1.31
The value of tHsmdaSchedulerPlcyGrp2Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for group 2 for this HSMDA scheduler policy group.
Status: current Access: read-create
OBJECT-TYPE    
  THsmdaPIRMRate  

tHsmdaSchedulerPlcyBrstLimit 1.3.6.1.4.1.6527.3.1.2.16.12.4.1.32
The value of tHsmdaSchedulerPlcyBrstLimit specifies the explicit shaping burst size for this HSMDA scheduler policy.
Status: current Access: read-create
OBJECT-TYPE    
  TClassBurstLimit  

tHsmdaSchedulerPlcyGrp1BrstLimit 1.3.6.1.4.1.6527.3.1.2.16.12.4.1.33
The value of tHsmdaSchedulerPlcyGrp1BrstLimit specifies the explicit shaping burst size for group 1 of this HSMDA scheduler policy.
Status: current Access: read-create
OBJECT-TYPE    
  TClassBurstLimit  

tHsmdaSchedulerPlcyGrp2BrstLimit 1.3.6.1.4.1.6527.3.1.2.16.12.4.1.34
The value of tHsmdaSchedulerPlcyGrp2BrstLimit specifies the explicit shaping burst size for group 2 of this HSMDA scheduler policy.
Status: current Access: read-create
OBJECT-TYPE    
  TClassBurstLimit  

tHsmdaSchedulerPlcyLvl1BrstLimit 1.3.6.1.4.1.6527.3.1.2.16.12.4.1.35
The value of tHsmdaSchedulerPlcyLvl1BrstLimit specifies the explicit shaping burst size for level 1 of this HSMDA scheduler policy.
Status: current Access: read-create
OBJECT-TYPE    
  TClassBurstLimit  

tHsmdaSchedulerPlcyLvl2BrstLimit 1.3.6.1.4.1.6527.3.1.2.16.12.4.1.36
The value of tHsmdaSchedulerPlcyLvl2BrstLimit specifies the explicit shaping burst size for level 2 of this HSMDA scheduler policy.
Status: current Access: read-create
OBJECT-TYPE    
  TClassBurstLimit  

tHsmdaSchedulerPlcyLvl3BrstLimit 1.3.6.1.4.1.6527.3.1.2.16.12.4.1.37
The value of tHsmdaSchedulerPlcyLvl3BrstLimit specifies the explicit shaping burst size for level 3 of this HSMDA scheduler policy.
Status: current Access: read-create
OBJECT-TYPE    
  TClassBurstLimit  

tHsmdaSchedulerPlcyLvl4BrstLimit 1.3.6.1.4.1.6527.3.1.2.16.12.4.1.38
The value of tHsmdaSchedulerPlcyLvl4BrstLimit specifies the explicit shaping burst size for level 4 of this HSMDA scheduler policy.
Status: current Access: read-create
OBJECT-TYPE    
  TClassBurstLimit  

tHsmdaSchedulerPlcyLvl5BrstLimit 1.3.6.1.4.1.6527.3.1.2.16.12.4.1.39
The value of tHsmdaSchedulerPlcyLvl5BrstLimit specifies the explicit shaping burst size for level 5 of this HSMDA scheduler policy.
Status: current Access: read-create
OBJECT-TYPE    
  TClassBurstLimit  

tHsmdaSchedulerPlcyLvl6BrstLimit 1.3.6.1.4.1.6527.3.1.2.16.12.4.1.40
The value of tHsmdaSchedulerPlcyLvl6BrstLimit specifies the explicit shaping burst size for level 6 of this HSMDA scheduler policy.
Status: current Access: read-create
OBJECT-TYPE    
  TClassBurstLimit  

tHsmdaSchedulerPlcyLvl7BrstLimit 1.3.6.1.4.1.6527.3.1.2.16.12.4.1.41
The value of tHsmdaSchedulerPlcyLvl7BrstLimit specifies the explicit shaping burst size for level 7 of this HSMDA scheduler policy.
Status: current Access: read-create
OBJECT-TYPE    
  TClassBurstLimit  

tHsmdaSchedulerPlcyLvl8BrstLimit 1.3.6.1.4.1.6527.3.1.2.16.12.4.1.42
The value of tHsmdaSchedulerPlcyLvl8BrstLimit specifies the explicit shaping burst size for level 8 of this HSMDA scheduler policy.
Status: current Access: read-create
OBJECT-TYPE    
  TClassBurstLimit  

tQosDomainLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.1
The value of the object tQosDomainLastChanged indicates the timestamp of last change to the QoS Domain.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tDSCPNameTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.5
The value of the object tDSCPNameTableLastChanged indicates the timestamp of last change to the DSCP Name Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tFCNameTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.10
The value of the object tFCNameTableLastChanged indicates the timestamp of last change to the FC Name Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapIngressTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.20
The value of the object tSapIngressTableLastChanged indicates the timestamp of last change to the Sap Ingress Policy Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapIngressQueueTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.21
tSapIngressQueueTableLastChanged maintains the timestamp of the last change made to the Sap Ingress Queue Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapIngressDSCPTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.22
tSapIngressDSCPTableLastChanged maintains the timestamp of the last change made to the Sap Ingress DSCP Mapping Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapIngressDot1pTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.23
tSapIngressDot1pTableLastChanged maintains the timestamp of the last change made to the Sap Ingress Dot1p Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapIngressIPCriteriaTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.24
tSapIngressIPCriteriaTableLastChanged maintains the timestamp of the last change made to the Sap Ingress IP Criteria Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapIngressMacCriteriaTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.25
tSapIngressMacCriteriaTableLastChanged maintains the timestamp of the last change made to the Sap Ingress Mac Criteria Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapIngressFCTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.26
tSapIngressFCTableLastChanged maintains the timestamp of the last change made to the Sap Ingress FC Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapIngressPrecTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.27
tSapIngressPrecTableLastChanged maintains the timestamp of the last change made to the Sap Ingress Precedence Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapEgressTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.30
tSapEgressTableLastChanged maintains the timestamp of the last change made to the Sap Egress Policy Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapEgressQueueTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.31
tSapEgressQueueTableLastChanged maintains the timestamp of the last change made to the Sap Egress Queue Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapEgressFCTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.32
tSapEgressFCTableLastChanged maintains the timestamp of the last change made to the Sap Egress FC Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tNetworkPolicyTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.40
tNetworkPolicyTableLastChanged maintains the timestamp of the last change made to the Network Policy Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tNetworkIngressDSCPTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.41
tNetworkIngressDSCPTableLastChanged maintains the timestamp of the last change made to the Network Ingress DSCP Mapping Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tNetworkIngressLSPEXPTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.42
tNetworkIngressLSPEXPTableLastChanged maintains the timestamp of the last change made to the Network Ingress LSPEXP Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tNetworkEgressFCTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.43
tNetworkEgressFCTableLastChanged maintains the timestamp of the last change made to the Network Egress FC Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tNetworkIngressDot1pTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.44
tNetworkIngressDot1pTableLastChanged maintains the timestamp of the last change made to the Network Ingress Dot1p Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tNetworkQueuePolicyTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.50
tNetworkQueuePolicyTableLastChanged maintains the timestamp of the last change made to the Network Queue Policy Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tNetworkQueueTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.51
tNetworkQueueTableLastChanged maintains the timestamp of the last change made to the Network Queue Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tNetworkQueueFCTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.52
tNetworkQueueFCTableLastChanged maintains the timestamp of the last change made to the Network Queue FC Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSlopePolicyTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.55
tSlopePolicyTableLastChanged maintains the timestamp of the last change made to the Slope Policy Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSchedulerPolicyTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.60
tSchedulerPolicyTableLastChanged maintains the timestamp of the last change made to the Scheduler Policy Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tVirtualSchedulerTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.61
tVirtualSchedulerTableLastChanged maintains the timestamp of the last change made to the Virtual Scheduler Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tAtmTdpTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.62
tAtmTdpTableLastChanged maintains the timestamp of the last change made to the Traffic Descriptor Profile Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSharedQueuePolicyTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.63
tSharedQueuePolicyTableLastChanged maintains the timestamp of the last change made to the Queue Policy Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSharedQueueTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.64
tSharedQueueTableLastChanged maintains the timestamp of the last change made to the Queue Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSharedQueueFCTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.65
tSharedQueueFCTableLastChanged maintains the timestamp of the last change made to the Queue FC Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapIngressIPv6CriteriaTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.66
The value of the object tSapIngressIPv6CriteriaTableLastChanged indicates the timestamp of the last change made to the Sap Ingress IPv6 Criteria Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapIngrHsmdaQueueTblLastChngd 1.3.6.1.4.1.6527.3.1.2.16.20.67
tSapIngrHsmdaQueueTblLastChngd maintains the timestamp of the last change made to the Sap Ingress HSMDA Queue Table. This object is obsoleted in 10.0 Release.
Status: obsolete Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapEgrHsmdaQueueTblLastChngd 1.3.6.1.4.1.6527.3.1.2.16.20.68
tSapEgrHsmdaQueueTblLastChngd maintains the timestamp of the last change made to the Sap Egress HSMDA Queue Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tHsmdaSchedPlcyTblLastChngd 1.3.6.1.4.1.6527.3.1.2.16.20.69
tHsmdaSchedPlcyTblLastChngd maintains the timestamp of the last change made to the HSMDA Scheduler Policy Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tHsmdaSchedPlcyGrpTblLastChngd 1.3.6.1.4.1.6527.3.1.2.16.20.70
tHsmdaSchedPlcyGrpTblLastChngd maintains the timestamp of the last change made to the HSMDA Scheduler Policy Group Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tHsmdaPoolPlcyTblLastChngd 1.3.6.1.4.1.6527.3.1.2.16.20.71
tHsmdaPoolPlcyTblLastChngd maintains the timestamp of the last change made to the HSMDA Pool Policy Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tHsmdaSlopePolicyTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.72
tHsmdaSlopePolicyTableLastChanged maintains the timestamp of the last change made to the Hsmda Slope Policy Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tNamedPoolPolicyTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.73
The value of tNamedPoolPolicyTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tNamedPoolPolicyTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tQ1NamedPoolTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.74
The value of tQ1NamedPoolTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tQ1NamedPoolTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tMcMlpppIngrProfTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.75
The value of tMcMlpppIngrProfTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tMcMlpppIngrProfTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tMcMlpppIngrClassTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.76
The value of tMcMlpppIngrClassTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tMcMlpppIngrClassTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tMcMlpppEgrProfTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.77
The value of tMcMlpppEgrProfTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tMcMlpppEgrProfTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tMcMlpppEgrClassTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.78
The value of tMcMlpppEgrClassTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tMcMlpppEgrClassTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tMcMlpppEgrFCTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.79
The value of tMcMlpppEgrFCTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tMcMlpppEgrFCTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tMcFrIngrProfTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.80
The value of tMcFrIngrProfTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tMcFrIngrProfTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tMcFrIngrClassTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.81
The value of tMcFrIngrClassTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tMcFrIngrClassTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tMcFrEgrProfTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.82
The value of tMcFrEgrProfTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tMcFrEgrProfTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tMcFrEgrClassTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.83
The value of tMcFrEgrClassTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tMcFrEgrClassTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapIngressLspExpTableLastChange 1.3.6.1.4.1.6527.3.1.2.16.20.84
The value of tSapIngressLspExpTableLastChange indicates the sysUpTime at the time of the last modification of an entry in the tSapIngressLspExpTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tAtmTdpTable 1.3.6.1.4.1.6527.3.1.2.16.21.1
This table contains information on ATM traffic descriptors for controlling ATM traffic management capabilities.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TAtmTdpEntry

tAtmTdpEntry 1.3.6.1.4.1.6527.3.1.2.16.21.1.1
This list contains ATM traffic descriptor objects and the associated parameters. All objects that do not apply to a given service category are given default values of zero.
Status: current Access: not-accessible
OBJECT-TYPE    
  TAtmTdpEntry  

tAtmTdpIndex 1.3.6.1.4.1.6527.3.1.2.16.21.1.1.1
This object is used to identify an entity inside the tAtmTdpTable. When creating a new row in the table the value of this index may be obtained by retrieving the value of tAtmTdpIndexNext.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtmTrafficDescrParamIndex 1..1000  

tAtmTdpSir 1.3.6.1.4.1.6527.3.1.2.16.21.1.1.2
tAtmTdpSir identifies the sustained information rate in kilobits per second. The default Sir is determined by the Service Category. The following default applies to Sir that is modifiable depending upon a given service category: Applicable Service Category Default Sir Value RT-VBR 0 NRT-VBR 0 Note that for the service categories given above, the value of Sir must be less than or equal to the value of Pir.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4294967295  

tAtmTdpPir 1.3.6.1.4.1.6527.3.1.2.16.21.1.1.3
tAtmTdpPir identifies the peak information rate in kilobits per second. The default Pir is determined by the Service Category. The following default applies to Pir that is modifiable depending upon a given service category: Applicable Service Category Default Pir Value UBR (with/without Mir) 4294967295 CBR 0 RT-VBR 0 NRT-VBR 0
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4294967295  

tAtmTdpMbs 1.3.6.1.4.1.6527.3.1.2.16.21.1.1.4
tAtmTdpMbs identifies the maximum burst size in cells. The default Mbs is determined by the Service Category. The following default applies to Mbs that is modifiable depending upon a given service category: Applicable Service Category Default Mbs Value RT-VBR 32 NRT-VBR 32
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4294967295  

tAtmTdpMir 1.3.6.1.4.1.6527.3.1.2.16.21.1.1.5
tAtmTdpMir identifies the Minimum Information Rate in kilobits per second. The default Mir is determined by the Service Category. The following default applies for Mir that is modifiable depending upon a given service category: Applicable Service Category Default Mir Value UBR (with/without Mir) 0 Note that for the service categories given above, the value of Mir must be less than or equal to the value of Pir.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4294967295  

tAtmTdpShaping 1.3.6.1.4.1.6527.3.1.2.16.21.1.1.6
tAtmTdpShaping determines whether egress shaping should occur. The default tAtmTdpShaping is determined by the Service Category. The following default applies for tAtmTdpShaping depending upon a given service category: Applicable Service Category Default Shaping Value UBR disabled CBR enabled RT-VBR enabled NRT-VBR enabled For a Service Category of UBR, tAtmTdpShaping cannot be enabled. For CBR and RT-VBR service cateories disabling shaping is MDA-dependent. Shaping is only applied in the egress direction.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

tAtmTdpServCat 1.3.6.1.4.1.6527.3.1.2.16.21.1.1.7
tAtmTdpServCat determines the ATM service category.
Status: current Access: read-create
OBJECT-TYPE    
  AtmServiceCategory  

tAtmTdpDescription 1.3.6.1.4.1.6527.3.1.2.16.21.1.1.8
The value of tAtmTdpDescription specifies an ASCII string used to describe the ATM traffic descriptor.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tAtmTdpLastChanged 1.3.6.1.4.1.6527.3.1.2.16.21.1.1.9
tAtmTdpLastChanged maintains the timestamp of the last change made to a row in the Traffic Descriptor Profile Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tAtmTdpRowStatus 1.3.6.1.4.1.6527.3.1.2.16.21.1.1.10
tAtmTdpRowStatus is used to create/modify/delete a new row in this table. Only createAndGo/Active/Destroy are supported
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tAtmTdpDescrType 1.3.6.1.4.1.6527.3.1.2.16.21.1.1.11
tAtmTdpDescrType identifies the types of ATM traffic descriptor. The default is determined by the value of tAtmTdpServCat. The following default rules apply: Applicable Service Category tAtmTdpDescrType UBR clp0And1pcr CBR clp0And1pcr RT-VBR clp0And1pcrPlusClp0And1scr NRT-VBR clp0And1pcrPlusClp0And1scr
Status: current Access: read-create
OBJECT-TYPE    
  TAtmTdpDescrType  

tAtmTdpCdvt 1.3.6.1.4.1.6527.3.1.2.16.21.1.1.12
tAtmTdpCdvt identifies the Cell Delay Variation Tolerance in microseconds. The following default applies for Cdvt that is modifiable depending upon a given service category: Applicable Service Category Default Cdvt Value CBR/RT-VBR/NRT-VBR/UBR 250
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4294967295  

tAtmTdpPolicing 1.3.6.1.4.1.6527.3.1.2.16.21.1.1.13
tAtmTdpPolicing determines whether ingress traffic is policed. Policing by default is disabled. Policing is valid for CBR, UBR RT-VBR and NRT-VBR. This is cell-based policing. tAtmTdpDescrType Policing Scheme Applicable Serv Cat clp0And1pcr CBR.1 CBR and UBR clp0And1pcrPlusClp0And1scr VBR.1 RT/NRT-VBR clp0And1pcrPlusClp0scr VBR.2 RT/NRT-VBR clp0And1pcrPlusClp0scrTag VBR.3 RT/NRT-VBR
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

tAtmTdpCLPTagging 1.3.6.1.4.1.6527.3.1.2.16.21.1.1.14
tAtmTdpCLPTagging controls the setting of the CLP bit in the ATM cell header for egress traffic on an IES or VPRN SAP. If disabled (the default), all traffic has the CLP bit set to zero. If enabled, traffic queued on expedited queues has the CLP bit set to zero, while traffic on non-expedited queues has the CLP bit set to one.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

tAtmTdpWeight 1.3.6.1.4.1.6527.3.1.2.16.21.1.1.15
The value of tAtmTdpWeight specifies the relative weight assigned to this ATM traffic descriptor with respect to ATM VP shaper scheduling. The value of tAtmTdpWeight is only relevant for MDA where the value of TIMETRA-CHASSIS-MIB::tmnxMDAAtmMode is equal to max16kVc, and is ignored otherwise. If the value of tAtmTdpWeight is not specified when the conceptual row is created, the weight is derived from the ATM service category: CBR 10 rt-VBR 7 nrt-VBR 5 UBR+ (nonzero MIR) 2 UBR (zero MIR) 1.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..255  

tNamedPoolPolicyTable 1.3.6.1.4.1.6527.3.1.2.16.22.1
This table contains information on Named buffer pools policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TNamedPoolPolicyEntry

tNamedPoolPolicyEntry 1.3.6.1.4.1.6527.3.1.2.16.22.1.1
This list contains Named buffer pools policy related information.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedPoolPolicyEntry  

tNamedPoolPolicyName 1.3.6.1.4.1.6527.3.1.2.16.22.1.1.1
The value of tNamedPoolPolicyName indicates the name of Named pool policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

tNamedPoolPolicyRowStatus 1.3.6.1.4.1.6527.3.1.2.16.22.1.1.2
The value of tNamedPoolPolicyRowStatus is used for creation or deletion of named pool policies.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tNamedPoolPolicyLastChanged 1.3.6.1.4.1.6527.3.1.2.16.22.1.1.3
The value of tNamedPoolPolicyLastChanged indicates the sysUpTime when this row was last modified.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tNamedPoolPolicyDescription 1.3.6.1.4.1.6527.3.1.2.16.22.1.1.4
The value of tNamedPoolPolicyDescription specifies the description for a specific named pool policy.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tNamedPoolPolicyQ1DefaultWeight 1.3.6.1.4.1.6527.3.1.2.16.22.1.1.5
The value of tNamedPoolPolicyQ1DefaultWeight specifies the port allocation weight given to the default pools.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..100  

tNamedPoolPolicyQ1MdaWeight 1.3.6.1.4.1.6527.3.1.2.16.22.1.1.6
The value of tNamedPoolPolicyQ1MdaWeight specifies the port allocation weight given to the MDA named pools.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..100  

tNamedPoolPolicyQ1PortWeight 1.3.6.1.4.1.6527.3.1.2.16.22.1.1.7
The value of tNamedPoolPolicyQ1PortWeight specifies the port allocation weight given to the local port named pools.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..100  

tQ1NamedPoolTable 1.3.6.1.4.1.6527.3.1.2.16.22.2
This table contains information on Q1 pools policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TQ1NamedPoolEntry

tQ1NamedPoolEntry 1.3.6.1.4.1.6527.3.1.2.16.22.2.1
This list contains Q1 pools policy related information.
Status: current Access: not-accessible
OBJECT-TYPE    
  TQ1NamedPoolEntry  

tQ1NamedPoolPolicyName 1.3.6.1.4.1.6527.3.1.2.16.22.2.1.1
The value of tQ1NamedPoolPolicyName indicates the name of the existing Q1 named pool policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

tQ1NamedPoolName 1.3.6.1.4.1.6527.3.1.2.16.22.2.1.2
The value of tQ1NamedPoolName indicates the name of the existing pool within the policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

tQ1NamedPoolRowStatus 1.3.6.1.4.1.6527.3.1.2.16.22.2.1.3
The value of tQ1NamedPoolRowStatus is used for creation or deletion of Q1 named pools.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tQ1NamedPoolLastChanged 1.3.6.1.4.1.6527.3.1.2.16.22.2.1.4
The value of tQ1NamedPoolLastChanged indicates the sysUpTime when this row was last modified.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tQ1NamedPoolDescription 1.3.6.1.4.1.6527.3.1.2.16.22.2.1.5
The value of tQ1NamedPoolDescription specifies the description for a specific Q1 named pool.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tQ1NamedPoolNetworkAllocWeight 1.3.6.1.4.1.6527.3.1.2.16.22.2.1.6
The value of tQ1NamedPoolNetworkAllocWeight specifies the weight used to divide network associated buffer space between named pools.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..100  

tQ1NamedPoolAccessAllocWeight 1.3.6.1.4.1.6527.3.1.2.16.22.2.1.7
The value of tQ1NamedPoolAccessAllocWeight specifies the weight used to divide access associated buffer space between named pools.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..100  

tQ1NamedPoolSlopePolicy 1.3.6.1.4.1.6527.3.1.2.16.22.2.1.8
The value of tQ1NamedPoolSlopePolicy specifies the name of the slop-policy which is used to override the default slope-policy for the named buffer pool.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tQ1NamedPoolReservedCbs 1.3.6.1.4.1.6527.3.1.2.16.22.2.1.9
The value of tQ1NamedPoolReservedCbs specifies the reserved CBS size of the pool. The reserved CBS (Committed Burst Size) defines the amount of buffer space within the pool that is not considered shared.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..100  

tQ1NamedPoolResvCbsAmbrAlrmStep 1.3.6.1.4.1.6527.3.1.2.16.22.2.1.10
The value of tQ1NamedPoolResvCbsAmbrAlrmStep specifies the percentage step-size for the reserved CBS size of the pool. When tQ1NamedPoolResvCbsAmbrAlrmStep is set to default value, the adaptive CBS sizing is disabled. To enable adaptive CBS sizing, tQ1NamedPoolResvCbsAmbrAlrmStep MUST be set to non-default value along with tQ1NamedPoolResvCbsAmbrAlrmMax. When reserved CBS is default adaptive CBS sizing cannot be enabled. The reserved CBS (Committed Burst Size) defines the amount of buffer space within the pool that is not considered shared.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..100  

tQ1NamedPoolResvCbsAmbrAlrmMax 1.3.6.1.4.1.6527.3.1.2.16.22.2.1.11
The value of tQ1NamedPoolResvCbsAmbrAlrmMax specifies the maximum percentage for the reserved CBS size of the pool. When tQ1NamedPoolResvCbsAmbrAlrmMax is set to default value, the adaptive CBS sizing is disabled. To enable adaptive CBS sizing, tQ1NamedPoolResvCbsAmbrAlrmMax MUST be set to non-default value along with tQ1NamedPoolResvCbsAmbrAlrmStep. When reserved CBS is default adaptive CBS sizing cannot be enabled. The reserved CBS (Committed Burst Size) defines the amount of buffer space within the pool that is not considered shared. Max reserved CBS must not be more than the reserved CBS.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..100  

tQ1NamedPoolAmbrAlrmThresh 1.3.6.1.4.1.6527.3.1.2.16.22.2.1.12
The value of tQ1NamedPoolAmbrAlrmThresh specifies the threshold for the amber alarm on the over-subscription allowed.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..1000  

tQ1NamedPoolRedAlrmThresh 1.3.6.1.4.1.6527.3.1.2.16.22.2.1.13
The value of tQ1NamedPoolRedAlrmThresh specifies the threshold for the red alarm on the over-subscription allowed.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..1000  

tAtmTdpIndexNext 1.3.6.1.4.1.6527.3.1.2.16.21.2
This object contains an appropriate value to be used for tAtmTdpIndex when creating entries in the tAtmTdpTable. The value 0 indicates that no unassigned entries are available. To obtain the tAtmTdpIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..1000  

tAtmTdpsMaxSupported 1.3.6.1.4.1.6527.3.1.2.16.21.3
This object contains the maximum number of ATM Traffic Descriptor Profiles that can be configured on this system.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

tAtmTdpsCurrentlyConfigured 1.3.6.1.4.1.6527.3.1.2.16.21.4
This object contains the number of currently configured ATM Traffic Descriptor Profiles on this system.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

tHsmdaPoolPolicyTable 1.3.6.1.4.1.6527.3.1.2.16.22.3
The tHsmdaPoolPolicyTable has an entry for each HSMDA pool policy configured on this system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    THsmdaPoolPolicyEntry

tHsmdaPoolPolicyEntry 1.3.6.1.4.1.6527.3.1.2.16.22.3.1
Each row represents a particular HSMDA pool policy. Entries are created and deleted by the user.
Status: current Access: not-accessible
OBJECT-TYPE    
  THsmdaPoolPolicyEntry  

tHsmdaPoolPolicyName 1.3.6.1.4.1.6527.3.1.2.16.22.3.1.1
The value of tHsmdaPoolPolicyName specifies the name of the HSMDA pool policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

tHsmdaPoolPolicyRowStatus 1.3.6.1.4.1.6527.3.1.2.16.22.3.1.2
The value of tHsmdaPoolPolicyRowStatus is used for the creation and deletion of HSMDA pool policies.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tHsmdaPoolLastChanged 1.3.6.1.4.1.6527.3.1.2.16.22.3.1.3
The value of tHsmdaPoolLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tHsmdaPoolDescription 1.3.6.1.4.1.6527.3.1.2.16.22.3.1.4
The value of tHsmdaPoolDescription specifies the description of this HSMDA pool policy.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tHsmdaPoolSystemReserve 1.3.6.1.4.1.6527.3.1.2.16.22.3.1.5
The value of tHsmdaPoolSystemReserve specifies the percentage of HSMDA buffers that will be reserved for internal system use. When this value is set, all the provisioned buffer pool allocation sizes will be re-evaluated. This includes the port class allocations specified by indirectly by tmnxPortIngPoolPercentRate and tmnxPortEgrPoolPercentRate, and class and root pools specified indirectly by tHsmdaPoolClass1AllocPercent through tHsmdaPoolClass8AllocPercent and tHsmdaPoolRoot1AllocWeight through tHsmdaPoolRoot8AllocWeight.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 100..3000  

tHsmdaPoolRoot1AllocWeight 1.3.6.1.4.1.6527.3.1.2.16.22.3.1.6
The value of tHsmdaPoolRoot1AllocWeight specifies the weight that will be applied to the first root pool and is divided by the sum of all root pool weights to derive the pool's buffer allocation factor.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight 1..100  

tHsmdaPoolRoot2AllocWeight 1.3.6.1.4.1.6527.3.1.2.16.22.3.1.7
The value of tHsmdaPoolRoot2AllocWeight specifies the weight that will be applied to the second root pool and is divided by the sum of all root pool weights to derive the pool's buffer allocation factor.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

tHsmdaPoolRoot3AllocWeight 1.3.6.1.4.1.6527.3.1.2.16.22.3.1.8
The value of tHsmdaPoolRoot3AllocWeight specifies the weight that will be applied to the third root pool and is divided by the sum of all root pool weights to derive the pool's buffer allocation factor.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

tHsmdaPoolRoot4AllocWeight 1.3.6.1.4.1.6527.3.1.2.16.22.3.1.9
The value of tHsmdaPoolRoot4AllocWeight specifies the weight that will be applied to the fourth root pool and is divided by the sum of all root pool weights to derive the pool's buffer allocation factor.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

tHsmdaPoolRoot5AllocWeight 1.3.6.1.4.1.6527.3.1.2.16.22.3.1.10
The value of tHsmdaPoolRoot5AllocWeight specifies the weight that will be applied to the fifth root pool and is divided by the sum of all root pool weights to derive the pool's buffer allocation factor.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

tHsmdaPoolRoot6AllocWeight 1.3.6.1.4.1.6527.3.1.2.16.22.3.1.11
The value of tHsmdaPoolRoot6AllocWeight specifies the weight that will be applied to the sixth root pool and is divided by the sum of all root pool weights to derive the pool's buffer allocation factor.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

tHsmdaPoolRoot7AllocWeight 1.3.6.1.4.1.6527.3.1.2.16.22.3.1.12
The value of tHsmdaPoolRoot7AllocWeight specifies the weight that will be applied to the seventh root pool and is divided by the sum of all root pool weights to derive the pool's buffer allocation factor.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

tHsmdaPoolRoot8AllocWeight 1.3.6.1.4.1.6527.3.1.2.16.22.3.1.13
The value of tHsmdaPoolRoot8AllocWeight specifies the weight that will be applied to the eighth root pool and is divided by the sum of all root pool weights to derive the pool's buffer allocation factor.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

tHsmdaPoolClass1Parent 1.3.6.1.4.1.6527.3.1.2.16.22.3.1.14
The value of tHsmdaPoolClass1Parent specifies the root pool to which the first class pool will be associated.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..8  

tHsmdaPoolClass1AllocPercent 1.3.6.1.4.1.6527.3.1.2.16.22.3.1.15
The value of tHsmdaPoolClass1AllocPercent specifies, indirectly, the size of the first class pool. The specified percentage, in hundredths of a percent, determines what percentage of the root pool with which it is associated, as specified by tHsmdaPoolClass1Parent, will be available to this class. The sum of the class pool percentages for a root pool may exceed 100 percent(10000 hundredths of a percent), allowing the root pool to be oversubscribed. The sum of the class pool percentages for a root pool may also total less than 100 percent, allowing the root pool to be undersubscribed.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..10000  

tHsmdaPoolClass2Parent 1.3.6.1.4.1.6527.3.1.2.16.22.3.1.16
The value of tHsmdaPoolClass2Parent specifies the root pool to which the second class pool will be associated.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..8  

tHsmdaPoolClass2AllocPercent 1.3.6.1.4.1.6527.3.1.2.16.22.3.1.17
The value of tHsmdaPoolClass2AllocPercent specifies, indirectly, the size of the first class pool. The specified percentage, in hundredths of a percent, determines what percentage of the root pool with which it is associated, as specified by tHsmdaPoolClass2Parent, will be available to this class. The sum of the class pool percentages for a root pool may exceed 100 percent(10000 hundredths of a percent), allowing the root pool to be oversubscribed. The sum of the class pool percentages for a root pool may also total less than 100 percent, allowing the root pool to be undersubscribed.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..10000  

tHsmdaPoolClass3Parent 1.3.6.1.4.1.6527.3.1.2.16.22.3.1.18
The value of tHsmdaPoolClass3Parent specifies the root pool to which the third class pool will be associated.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..8  

tHsmdaPoolClass3AllocPercent 1.3.6.1.4.1.6527.3.1.2.16.22.3.1.19
The value of tHsmdaPoolClass3AllocPercent specifies, indirectly, the size of the first class pool. The specified percentage, in hundredths of a percent, determines what percentage of the root pool with which it is associated, as specified by tHsmdaPoolClass3Parent, will be available to this class. The sum of the class pool percentages for a root pool may exceed 100 percent(10000 hundredths of a percent), allowing the root pool to be oversubscribed. The sum of the class pool percentages for a root pool may also total less than 100 percent, allowing the root pool to be undersubscribed.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..10000  

tHsmdaPoolClass4Parent 1.3.6.1.4.1.6527.3.1.2.16.22.3.1.20
The value of tHsmdaPoolClass4Parent specifies the root pool to which the fourth class pool will be associated.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..8  

tHsmdaPoolClass4AllocPercent 1.3.6.1.4.1.6527.3.1.2.16.22.3.1.21
The value of tHsmdaPoolClass4AllocPercent specifies, indirectly, the size of the first class pool. The specified percentage, in hundredths of a percent, determines what percentage of the root pool with which it is associated, as specified by tHsmdaPoolClass4Parent, will be available to this class. The sum of the class pool percentages for a root pool may exceed 100 percent(10000 hundredths of a percent), allowing the root pool to be oversubscribed. The sum of the class pool percentages for a root pool may also total less than 100 percent, allowing the root pool to be undersubscribed.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..10000  

tHsmdaPoolClass5Parent 1.3.6.1.4.1.6527.3.1.2.16.22.3.1.22
The value of tHsmdaPoolClass5Parent specifies the root pool to which the fifth class pool will be associated.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..8  

tHsmdaPoolClass5AllocPercent 1.3.6.1.4.1.6527.3.1.2.16.22.3.1.23
The value of tHsmdaPoolClass5AllocPercent specifies, indirectly, the size of the first class pool. The specified percentage, in hundredths of a percent, determines what percentage of the root pool with which it is associated, as specified by tHsmdaPoolClass5Parent, will be available to this class. The sum of the class pool percentages for a root pool may exceed 100 percent(10000 hundredths of a percent), allowing the root pool to be oversubscribed. The sum of the class pool percentages for a root pool may also total less than 100 percent, allowing the root pool to be undersubscribed.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..10000  

tHsmdaPoolClass6Parent 1.3.6.1.4.1.6527.3.1.2.16.22.3.1.24
The value of tHsmdaPoolClass6Parent specifies the root pool to which the sixth class pool will be associated.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..8  

tHsmdaPoolClass6AllocPercent 1.3.6.1.4.1.6527.3.1.2.16.22.3.1.25
The value of tHsmdaPoolClass6AllocPercent specifies, indirectly, the size of the first class pool. The specified percentage, in hundredths of a percent, determines what percentage of the root pool with which it is associated, as specified by tHsmdaPoolClass6Parent, will be available to this class. The sum of the class pool percentages for a root pool may exceed 100 percent(10000 hundredths of a percent), allowing the root pool to be oversubscribed. The sum of the class pool percentages for a root pool may also total less than 100 percent, allowing the root pool to be undersubscribed.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..10000  

tHsmdaPoolClass7Parent 1.3.6.1.4.1.6527.3.1.2.16.22.3.1.26
The value of tHsmdaPoolClass7Parent specifies the root pool to which the seventh class pool will be associated.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..8  

tHsmdaPoolClass7AllocPercent 1.3.6.1.4.1.6527.3.1.2.16.22.3.1.27
The value of tHsmdaPoolClass7AllocPercent specifies, indirectly, the size of the first class pool. The specified percentage, in hundredths of a percent, determines what percentage of the root pool with which it is associated, as specified by tHsmdaPoolClass7Parent, will be available to this class. The sum of the class pool percentages for a root pool may exceed 100 percent(10000 hundredths of a percent), allowing the root pool to be oversubscribed. The sum of the class pool percentages for a root pool may also total less than 100 percent, allowing the root pool to be undersubscribed.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..10000  

tHsmdaPoolClass8Parent 1.3.6.1.4.1.6527.3.1.2.16.22.3.1.28
The value of tHsmdaPoolClass8Parent specifies the root pool to which the eigth class pool will be associated.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..8  

tHsmdaPoolClass8AllocPercent 1.3.6.1.4.1.6527.3.1.2.16.22.3.1.29
The value of tHsmdaPoolClass8AllocPercent specifies, indirectly, the size of the first class pool. The specified percentage, in hundredths of a percent, determines what percentage of the root pool with which it is associated, as specified by tHsmdaPoolClass8Parent, will be available to this class. The sum of the class pool percentages for a root pool may exceed 100 percent(10000 hundredths of a percent), allowing the root pool to be oversubscribed. The sum of the class pool percentages for a root pool may also total less than 100 percent, allowing the root pool to be undersubscribed.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..10000  

tMcMlpppIngrProfTable 1.3.6.1.4.1.6527.3.1.2.16.23.1
The tMcMlpppIngrProfTable has an entry for each ingress multi-class mlppp profile configured in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TMcMlpppIngrProfEntry

tMcMlpppIngrProfEntry 1.3.6.1.4.1.6527.3.1.2.16.23.1.1
Each row entry contains information about a particular ingress multi-class mlppp profile. Multi-class mlppp ingress profile 1 is created by the agent. It cannot be deleted. Other entries are created by the user.
Status: current Access: not-accessible
OBJECT-TYPE    
  TMcMlpppIngrProfEntry  

tMcMlpppIngrProfIndex 1.3.6.1.4.1.6527.3.1.2.16.23.1.1.1
The value of tMcMlpppIngrProfIndex specifies a specific multi-class ingress profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  TMlpppQoSProfileId 1..65535  

tMcMlpppIngrProfDescription 1.3.6.1.4.1.6527.3.1.2.16.23.1.1.2
The value of tMcMlpppIngrProfDescription holds the description for this profile.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tMcMlpppIngrProfLastChanged 1.3.6.1.4.1.6527.3.1.2.16.23.1.1.3
The value of tMcMlpppIngrProfTable indicates the sysUpTime for the last change to this row.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tMcMlpppIngrProfRowStatus 1.3.6.1.4.1.6527.3.1.2.16.23.1.1.4
The value of tMcMlpppIngrProfRowStatus controls the creation and deletion of rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tMcMlpppIngrClassTable 1.3.6.1.4.1.6527.3.1.2.16.23.2
The tMcMlpppIngrClassTable has an entry for each multi-class mlppp ingress class per multi-class mlppp ingress profile in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TMcMlpppIngrClassEntry

tMcMlpppIngrClassEntry 1.3.6.1.4.1.6527.3.1.2.16.23.2.1
Each entry contains information about a particular mlppp ingress multi-class class per mlppp ingress profile. Entries are created/destroyed as each tMcMlpppIngrProfEntry is created/destroyed.
Status: current Access: not-accessible
OBJECT-TYPE    
  TMcMlpppIngrClassEntry  

tMcMlpppIngrClassIndex 1.3.6.1.4.1.6527.3.1.2.16.23.2.1.1
The value of tMcMlpppIngrClassIndex specifies a specific mlppp ingress class per multi-class mlppp ingress profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxMcMlpppClassIndex  

tMcMlpppIngrClassReassemblyTmout 1.3.6.1.4.1.6527.3.1.2.16.23.2.1.2
The value of tMcMlpppIngrClassReassemblyTmout specifies the reassembly timeout for a specific mlppp multi-class ingress class. The default reassembly timeout value is determined by the tMcMlpppIngrClassIndex value. Currently only four multi-class classes are supported per profile. tMcMlpppIngrClassIndex Default Reassembly Value 0 10 1 10 2 100 3 1000
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..1000  

tMcMlpppIngrClassLastChanged 1.3.6.1.4.1.6527.3.1.2.16.23.2.1.3
The value of tMcMlpppIngrClassLastChanged indicates the sysUpTime for the last change to this entry.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tMcMlpppEgrProfTable 1.3.6.1.4.1.6527.3.1.2.16.24.1
The tMcMlpppEgrProfTable has an entry for each egress multi-class mlppp profile configured in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TMcMlpppEgrProfEntry

tMcMlpppEgrProfEntry 1.3.6.1.4.1.6527.3.1.2.16.24.1.1
Each row entry contains information about a particular egress multi-class mlppp profile. Multi-class mlppp egress profiles 1,2 and 3 are created by the agent. They cannot be deleted. Other entries are created by the user.
Status: current Access: not-accessible
OBJECT-TYPE    
  TMcMlpppEgrProfEntry  

tMcMlpppEgrProfIndex 1.3.6.1.4.1.6527.3.1.2.16.24.1.1.1
The value of tMcMlpppEgrProfIndex specifies a specific multi-class egress profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  TMlpppQoSProfileId 1..65535  

tMcMlpppEgrProfDescription 1.3.6.1.4.1.6527.3.1.2.16.24.1.1.2
The value of tMcMlpppEgrProfDescription holds the description for this profile.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tMcMlpppEgrProfLastChanged 1.3.6.1.4.1.6527.3.1.2.16.24.1.1.3
The value of tMcMlpppEgrProfLastChanged indicates the sysUpTime for the last change to this row.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tMcMlpppEgrProfRowStatus 1.3.6.1.4.1.6527.3.1.2.16.24.1.1.4
The value of tMcMlpppEgrProfRowStatus controls the creation and deletion of rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tMcMlpppEgrClassTable 1.3.6.1.4.1.6527.3.1.2.16.24.3
The tMcMlpppEgrClassTable has an entry for each multiclass mlppp egress profile in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TMcMlpppEgrClassEntry

tMcMlpppEgrClassEntry 1.3.6.1.4.1.6527.3.1.2.16.24.3.1
Each entry contains information about a particular mlppp egress multi-class class per mlppp multi-class mlppp egress profile. Entries are created/destroyed as each tMcMlpppEgrProfEntry is created/destroyed.
Status: current Access: not-accessible
OBJECT-TYPE    
  TMcMlpppEgrClassEntry  

tMcMlpppEgrClassIndex 1.3.6.1.4.1.6527.3.1.2.16.24.3.1.1
The value of tMcMlpppEgrClassIndex specifies a specific mlppp egress class per multi-class mlppp egress profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxMcMlpppClassIndex  

tMcMlpppEgrClassMir 1.3.6.1.4.1.6527.3.1.2.16.24.3.1.2
The value of tMcMlpppEgrClassMir specifies the Minimum Information Rate given as a percentage. A value of zero represents this object is not applicable for this class. The default Mir is determined by the tMcMlpppEgrClassIndex value. Currently only four multi-class classes are supported per profile. tMcMlpppEgrClassIndex Default Mir Value 0 100 1 85 2 0 3 0
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 1..100  

tMcMlpppEgrClassWeight 1.3.6.1.4.1.6527.3.1.2.16.24.3.1.3
The value of tMcMlpppEgrClassWeight specifies the weight of this multiclass class given as a percentage. A value of zero represents this object is not applicable for this class. The default Weight is determined by the tMcMlpppEgrClassIndex value. Currently only four multi-class classes are supported per profile. tMcMlpppEgrClassIndex Default Weight Value 0 0 1 0 2 66 3 33
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 1..100  

tMcMlpppEgrClassMaxSize 1.3.6.1.4.1.6527.3.1.2.16.24.3.1.4
The value of tMcMlpppEgrClassMaxSize specifies the buffer queue size. The default buffer size is determined by the tMcMlpppEgrClassIndex value. Currently only four multi-class classes are supported per profile. tMcMlpppEgrClassIndex Default Max Size 0 25 1 5 2 200 3 1000
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..1000  

tMcMlpppEgrClassLastChanged 1.3.6.1.4.1.6527.3.1.2.16.24.3.1.5
The value of tMcMlpppEgrClassLastChanged indicates the sysUpTime for the last change to this entry.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tMcMlpppEgrFCTable 1.3.6.1.4.1.6527.3.1.2.16.24.4
The tMcMlpppEgrFCTable has an entry for all egress FC Mappings to multi-class mlppp classes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TMcMlpppEgrFCEntry

tMcMlpppEgrFCEntry 1.3.6.1.4.1.6527.3.1.2.16.24.4.1
Each entry contains information about all egress FC Mappings to multi-class mlppp classes. Entries are created/destroyed as each tMcMlpppEgrProfEntry is created/destroyed.
Status: current Access: not-accessible
OBJECT-TYPE    
  TMcMlpppEgrFCEntry  

tMcMlpppEgrFCName 1.3.6.1.4.1.6527.3.1.2.16.24.4.1.1
The value tMcMlpppEgrFCName specifies of the name of the forwarding class.
Status: current Access: not-accessible
OBJECT-TYPE    
  TFCName  

tMcMlpppEgrFCClass 1.3.6.1.4.1.6527.3.1.2.16.24.4.1.2
The value of tMcMlpppEgrFCClass specifies the mlppp multi-class class for the per-forwarding-class specified. The default class value is determined by the Forwarding Class Name. Forwarding Class Name Mlppp Class Value be 3 l2 2 af 2 l1 2 h2 2 ef 1 h1 0 nc 0
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..3  

tMcMlpppEgrFCLastChanged 1.3.6.1.4.1.6527.3.1.2.16.24.4.1.3
The value of tMcMlpppEgrFCLastChanged indicates the sysUpTime for the last change to this entry.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tMcFrIngrProfTable 1.3.6.1.4.1.6527.3.1.2.16.25.1
The tMcFrIngrProfTable has an entry for each ingress multi-class frame-relay profile configured in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TMcFrIngrProfEntry

tMcFrIngrProfEntry 1.3.6.1.4.1.6527.3.1.2.16.25.1.1
Each row entry contains information about a particular ingress multi-class frame-relay profile. Multi-class frame-relay ingress profile 1 is created by the agent. It cannot be modified/deleted. Other entries are created by the user.
Status: current Access: not-accessible
OBJECT-TYPE    
  TMcFrIngrProfEntry  

tMcFrIngrProfIndex 1.3.6.1.4.1.6527.3.1.2.16.25.1.1.1
The value of tMcFrIngrProfIndex specifies a specific multi-class ingress profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  TMcFrQoSProfileId 1..65535  

tMcFrIngrProfDescription 1.3.6.1.4.1.6527.3.1.2.16.25.1.1.2
The value of tMcFrIngrProfDescription holds the description for this profile.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tMcFrIngrProfLastChanged 1.3.6.1.4.1.6527.3.1.2.16.25.1.1.3
The value of tMcFrIngrProfTable indicates the sysUpTime for the last change to this row.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tMcFrIngrProfRowStatus 1.3.6.1.4.1.6527.3.1.2.16.25.1.1.4
The value of tMcFrIngrProfRowStatus controls the creation and deletion of rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tMcFrIngrClassTable 1.3.6.1.4.1.6527.3.1.2.16.25.2
The tMcFrIngrClassTable has an entry for each multi-class frame-relay ingress class per multi-class frame-relay ingress profile in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TMcFrIngrClassEntry

tMcFrIngrClassEntry 1.3.6.1.4.1.6527.3.1.2.16.25.2.1
Each entry contains information about a particular frame-relay ingress multi-class class per frame-relay ingress profile. Entries are created/destroyed as each tMcFrIngrProfEntry is created/destroyed.
Status: current Access: not-accessible
OBJECT-TYPE    
  TMcFrIngrClassEntry  

tMcFrIngrClassIndex 1.3.6.1.4.1.6527.3.1.2.16.25.2.1.1
The value of tMcFrIngrClassIndex specifies a specific frame-relay ingress class per multi-class frame-relay ingress profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxMcFrClassIndex  

tMcFrIngrClassReassemblyTmout 1.3.6.1.4.1.6527.3.1.2.16.25.2.1.2
The value of tMcFrIngrClassReassemblyTmout specifies the reassembly timeout for a specific frame-relay multi-class ingress class. Currently only four multi-class classes are supported per profile.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..1000  

tMcFrIngrClassLastChanged 1.3.6.1.4.1.6527.3.1.2.16.25.2.1.3
The value of tMcFrIngrClassLastChanged indicates the sysUpTime for the last change to this entry.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tMcFrEgrProfTable 1.3.6.1.4.1.6527.3.1.2.16.26.1
The tMcFrEgrProfTable has an entry for each egress multi-class frame-relay profile configured in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TMcFrEgrProfEntry

tMcFrEgrProfEntry 1.3.6.1.4.1.6527.3.1.2.16.26.1.1
Each row entry contains information about a particular egress multi-class frame-relay profile. Multi-class frame-relay egress profile 1 is created by the agent. It cannot be modified/deleted. Other entries are created by the user.
Status: current Access: not-accessible
OBJECT-TYPE    
  TMcFrEgrProfEntry  

tMcFrEgrProfIndex 1.3.6.1.4.1.6527.3.1.2.16.26.1.1.1
The value of tMcFrEgrProfIndex specifies a specific multi-class egress profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  TMcFrQoSProfileId 1..65535  

tMcFrEgrProfDescription 1.3.6.1.4.1.6527.3.1.2.16.26.1.1.2
The value of tMcFrEgrProfDescription holds the description for this profile.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tMcFrEgrProfLastChanged 1.3.6.1.4.1.6527.3.1.2.16.26.1.1.3
The value of tMcFrEgrProfLastChanged indicates the sysUpTime for the last change to this row.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tMcFrEgrProfRowStatus 1.3.6.1.4.1.6527.3.1.2.16.26.1.1.4
The value of tMcFrEgrProfRowStatus controls the creation and deletion of rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tMcFrEgrClassTable 1.3.6.1.4.1.6527.3.1.2.16.26.3
The tMcFrEgrClassTable has an entry for each multiclass mlppp egress profile in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TMcFrEgrClassEntry

tMcFrEgrClassEntry 1.3.6.1.4.1.6527.3.1.2.16.26.3.1
Each entry contains information about a particular frame-relay egress multi-class class per multi-class frame-relay egress profile. Entries are created/destroyed as each tMcFrEgrProfEntry is created/destroyed.
Status: current Access: not-accessible
OBJECT-TYPE    
  TMcFrEgrClassEntry  

tMcFrEgrClassIndex 1.3.6.1.4.1.6527.3.1.2.16.26.3.1.1
The value of tMcFrEgrClassIndex specifies a specific frame-relay egress class per multi-class frame-relay egress profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxMcFrClassIndex  

tMcFrEgrClassMir 1.3.6.1.4.1.6527.3.1.2.16.26.3.1.2
The value of tMcFrEgrClassMir specifies the Minimum Information Rate given as a percentage. A value of zero represents this object is not applicable for this class. Currently only four multi-class classes are supported per profile.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 1..100  

tMcFrEgrClassWeight 1.3.6.1.4.1.6527.3.1.2.16.26.3.1.3
The value of tMcMlpppEgrClassWeight specifies the weight of this multiclass class given as a percentage. A value of zero represents this object is not applicable for this class. Currently only four multi-class classes are supported per profile.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 1..100  

tMcFrEgrClassMaxSize 1.3.6.1.4.1.6527.3.1.2.16.26.3.1.4
The value of tMcFrEgrClassMaxSize specifies the buffer queue size. The default buffer size is determined by the tMcFrEgrClassIndex value. Currently only four multi-class classes are supported per profile.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..1000  

tMcFrEgrClassLastChanged 1.3.6.1.4.1.6527.3.1.2.16.26.3.1.5
The value of tMcFrEgrClassLastChanged indicates the sysUpTime for the last change to this entry.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tQosPolicerCtrlPolTblLastChgd 1.3.6.1.4.1.6527.3.1.2.16.20.87
tQosPolicerCtrlPolTblLastChgd indicates the timestamp of last change to the tQosPolicerCtrlPolTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tQosPolicerCtrlPolTable 1.3.6.1.4.1.6527.3.1.2.16.27.1
tQosPolicerCtrlPolTable defines all egress queues.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TQosPolicerCtrlPolEntry

tQosPolicerCtrlPolEntry 1.3.6.1.4.1.6527.3.1.2.16.27.1.1
tQosPolicerCtrlPolEntry defines a particular egress queue. Entries are created and deleted by user.
Status: current Access: not-accessible
OBJECT-TYPE    
  TQosPolicerCtrlPolEntry  

tQosPolicerCtrlPolName 1.3.6.1.4.1.6527.3.1.2.16.27.1.1.1
The value of tQosPolicerCtrlPolName identifies the name of the policer control policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

tQosPolicerCtrlPolRowStatus 1.3.6.1.4.1.6527.3.1.2.16.27.1.1.2
This is the Row Status of the entry. This allows creation/deletion of rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tQosPolicerCtrlPolLastChgd 1.3.6.1.4.1.6527.3.1.2.16.27.1.1.3
The value of tQosPolicerCtrlPolLastChgd indicates the timestamp of last change to this row in tQosPolicerCtrlPolTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tQosPolicerCtrlPolDescr 1.3.6.1.4.1.6527.3.1.2.16.27.1.1.4
The value of tQosPolicerCtrlPolDescr specifies the description for the policer control policy.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tQosPolicerCtrlPolRootMaxRate 1.3.6.1.4.1.6527.3.1.2.16.27.1.1.5
The value of tQosPolicerCtrlPolRootMaxRate specifies the maximum frame based bandwidth limit of this policer.
Status: current Access: read-create
OBJECT-TYPE    
  THPolPIRRate  

tQosPolicerCtrlPolMinMBSSep 1.3.6.1.4.1.6527.3.1.2.16.27.1.1.6
The value of tQosPolicerCtrlPolMinMBSSep specifies the minimum amount of seperation buffer space (in bytes) allowed by this policer.
Status: current Access: read-create
OBJECT-TYPE    
  TPlcrBurstSizeBytes  

tQosPolicerCtrlPolProfPref 1.3.6.1.4.1.6527.3.1.2.16.27.1.1.7
The value of tQosPolicerCtrlPolProfPref specifies the minimum amount of seperation buffer space (in bytes) allowed by this policer. When the value of this object is set to 'true', preferred profile is applied to this policy. When the value is set to 'false', no preffered profile is set to this policy.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tQosPolicerLevelTblLastChgd 1.3.6.1.4.1.6527.3.1.2.16.20.88
tQosPolicerLevelTblLastChgd indicates the timestamp of last change to the tQosPolicerLevelTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tQosPolicerLevelTable 1.3.6.1.4.1.6527.3.1.2.16.27.2
tQosPolicerLevelTable defines all levels of QoS Policer control policy defined by tQosPolicerCtrlPolTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TQosPolicerLevelEntry

tQosPolicerLevelEntry 1.3.6.1.4.1.6527.3.1.2.16.27.2.1
tQosPolicerLevelEntry defines a specific level of QoS policer control policy defined by tQosPolicerCtrlPolTable. Entries are created and deleted by the system when QoS policer control policy is created and deleted.
Status: current Access: not-accessible
OBJECT-TYPE    
  TQosPolicerLevelEntry  

tQosPolicerLevel 1.3.6.1.4.1.6527.3.1.2.16.27.2.1.1
The value of tQosPolicerLevel identifies the level of the policer control policy defined by tQosPolicerCtrlPolName.
Status: current Access: not-accessible
OBJECT-TYPE    
  TLevel  

tQosPolicerLevelLastChgd 1.3.6.1.4.1.6527.3.1.2.16.27.2.1.2
The value of tQosPolicerLevelLastChgd indicates the timestamp of last change to this row in tQosPolicerLevelTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tQosPolicerLevelCumMBS 1.3.6.1.4.1.6527.3.1.2.16.27.2.1.3
The value of tQosPolicerLevelCumMBS specifies the maximum amount of cumulative buffer space (in bytes) allowed for this level by this policer.
Status: current Access: read-create
OBJECT-TYPE    
  TPlcrBurstSizeBytes  

tQosPolicerLevelFixedMBS 1.3.6.1.4.1.6527.3.1.2.16.27.2.1.4
The value of tQosPolicerLevelFixedMBS specifies whether the cumulative buffer space is fixed for this level. When the value of this object is set to 'true', cumulative buffer space for this level is fixed. When the value is set to 'false', cumulative buffer space for this level is not fixed.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tQosPolicerArbiterTblLastChgd 1.3.6.1.4.1.6527.3.1.2.16.20.89
tQosPolicerArbiterTblLastChgd indicates the timestamp of last change to the tQosPolicerArbiterTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tQosPolicerArbiterTable 1.3.6.1.4.1.6527.3.1.2.16.27.3
tQosPolicerArbiterTable defines policy arbiters for all policer control policies.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TQosPolicerArbiterEntry

tQosPolicerArbiterEntry 1.3.6.1.4.1.6527.3.1.2.16.27.3.1
tQosPolicerArbiterEntry defines a particular policy arbiter for a specific QoS policer control policy on a given tier. Entries are created and deleted by user.
Status: current Access: not-accessible
OBJECT-TYPE    
  TQosPolicerArbiterEntry  

tQosPolicerArbiterTier 1.3.6.1.4.1.6527.3.1.2.16.27.3.1.1
The value of tQosPolicerArbiterTier identifies the tier of the policer control policy arbiter.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER tier1(1), tier2(2)  

tQosPolicerArbiterName 1.3.6.1.4.1.6527.3.1.2.16.27.3.1.2
The value of tQosPolicerArbiterName identifies the name of the policer control policy arbiter.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

tQosPolicerArbiterRowStatus 1.3.6.1.4.1.6527.3.1.2.16.27.3.1.3
This is the Row Status of the entry. This allows creation/deletion of rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tQosPolicerArbiterLastChgd 1.3.6.1.4.1.6527.3.1.2.16.27.3.1.4
The value of tQosPolicerArbiterLastChgd indicates the timestamp of last change to this row in tQosPolicerArbiterTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tQosPolicerArbiterDescr 1.3.6.1.4.1.6527.3.1.2.16.27.3.1.5
The value of tQosPolicerArbiterDescr specifies the description for the policer control policy arbiter for the given tier.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tQosPolicerArbiterRate 1.3.6.1.4.1.6527.3.1.2.16.27.3.1.6
The value of tQosPolicerArbiterRate specifies the maximum frame based bandwidth limit of this policer control policy arbiter for the given tier.
Status: current Access: read-create
OBJECT-TYPE    
  THPolPIRRate  

tQosPolicerArbiterParent 1.3.6.1.4.1.6527.3.1.2.16.27.3.1.7
tQosPolicerArbiterParent specifies the scheduler to which this queue would be feeding.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tQosPolicerArbiterLevel 1.3.6.1.4.1.6527.3.1.2.16.27.3.1.8
tQosPolicerArbiterLevel specifies the level of priority while feeding the parent.
Status: current Access: read-create
OBJECT-TYPE    
  TLevel  

tQosPolicerArbiterWeight 1.3.6.1.4.1.6527.3.1.2.16.27.3.1.9
tQosPolicerArbiterWeight specifies the weight that needs to be used by the scheduler to which this queue would be feeding.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicerWeight  

tQosIngPolicerTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.97
tQosIngPolicerTableLastChanged indicates the timestamp of last change to the tQosIngPolicerTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tQosIngPolicerTable 1.3.6.1.4.1.6527.3.1.2.16.27.4
tQosIngPolicerTable defines QOS Ingress Policer Table for providing, via SNMP, the capability of defining the policers in the ingress queue groups. tQosIngPolicerTable holds a list of all the policers configured in the managed system. Policers must exist in this table before being referenced by the forwarding class mappings within the Qos policies.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TQosIngPolicerEntry

tQosIngPolicerEntry 1.3.6.1.4.1.6527.3.1.2.16.27.4.1
tQosIngPolicerEntry defines an entry in the tQosIngPolicerTable. Entries are created/deleted in this table by SNMP sets to tQosIngPolicerRowStatus.
Status: current Access: not-accessible
OBJECT-TYPE    
  TQosIngPolicerEntry  

tQosIngPolicerId 1.3.6.1.4.1.6527.3.1.2.16.27.4.1.1
tQosIngPolicerId defines the Ingress Queue Group Policer identifier. It identifies an ingress queue group policer in the managed system.
Status: current Access: not-accessible
OBJECT-TYPE    
  TIngPolicerId  

tQosIngPolicerRowStatus 1.3.6.1.4.1.6527.3.1.2.16.27.4.1.2
tQosIngPolicerRowStatus allows entries to be created and deleted in the tQosIngPolicerTable.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tQosIngPolicerLastChanged 1.3.6.1.4.1.6527.3.1.2.16.27.4.1.3
tQosIngPolicerLastChanged indicates the value of sysUpTime when the entry was last modified.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tQosIngPolicerDescr 1.3.6.1.4.1.6527.3.1.2.16.27.4.1.4
tQosIngPolicerDescr specifies the description of the policer.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tQosIngPolicerPIRAdaptation 1.3.6.1.4.1.6527.3.1.2.16.27.4.1.5
The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
Status: current Access: read-create
OBJECT-TYPE    
  TAdaptationRule  

tQosIngPolicerCIRAdaptation 1.3.6.1.4.1.6527.3.1.2.16.27.4.1.6
The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
Status: current Access: read-create
OBJECT-TYPE    
  TAdaptationRule  

tQosIngPolicerParent 1.3.6.1.4.1.6527.3.1.2.16.27.4.1.7
tQosIngPolicerParent specifies the arbiter to which this policer would be feeding.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tQosIngPolicerLevel 1.3.6.1.4.1.6527.3.1.2.16.27.4.1.8
tQosIngPolicerLevel specifies the level of priority while feeding the parent.
Status: current Access: read-create
OBJECT-TYPE    
  TLevel  

tQosIngPolicerWeight 1.3.6.1.4.1.6527.3.1.2.16.27.4.1.9
tQosIngPolicerWeight specifies the weight that needs to be used by the arbiter to which this policer would be feeding
Status: current Access: read-create
OBJECT-TYPE    
  TPolicerWeight  

tQosIngPolicerAdminPIR 1.3.6.1.4.1.6527.3.1.2.16.27.4.1.10
tQosIngPolicerAdminPIR specifies the administrative PIR specified by the user.
Status: current Access: read-create
OBJECT-TYPE    
  THPolPIRRate  

tQosIngPolicerAdminCIR 1.3.6.1.4.1.6527.3.1.2.16.27.4.1.11
tQosIngPolicerAdminCIR specifies the administrative CIR specified by the user.
Status: current Access: read-create
OBJECT-TYPE    
  THPolCIRRate  

tQosIngPolicerCBS 1.3.6.1.4.1.6527.3.1.2.16.27.4.1.12
tQosIngPolicerCBS specifies the amount of reserved buffer space (in bytes) used to configure the policer's CIR leaky bucket's 'exceed' threshold.
Status: current Access: read-create
OBJECT-TYPE    
  TPlcrBurstSizeBytes  

tQosIngPolicerMBS 1.3.6.1.4.1.6527.3.1.2.16.27.4.1.13
tQosIngPolicerMBS specifies the maximum amount of buffer space (in bytes) used to configure the policer's PIR leaky bucket's high priority 'violate' threshold.
Status: current Access: read-create
OBJECT-TYPE    
  TPlcrBurstSizeBytes  

tQosIngPolicerHiPrioOnly 1.3.6.1.4.1.6527.3.1.2.16.27.4.1.14
tQosIngPolicerHiPrioOnly specifies the percentage of buffer space for the queue, used to configure the percentage of the policer's PIR leaky bucket's MBS (maximum burst size) that is reserved for high priority traffic.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstPercentOrDefault  

tQosIngPolicerPktOffset 1.3.6.1.4.1.6527.3.1.2.16.27.4.1.15
tQosIngPolicerPktOffset specifies the packet byte offset for addition of policing information by this policer.
Status: current Access: read-create
OBJECT-TYPE    
  TPerPacketOffset  

tQosIngPolicerProfileCapped 1.3.6.1.4.1.6527.3.1.2.16.27.4.1.16
The value of tQosIngPolicerProfileCapped specifies how the explicit in-profile and undetermined profile traffic should be handled at the ingress policer. When the value of tQosIngPolicerProfileCapped is set to 'true', both explicit in-profile and undetermined profile traffic is honored up to CIR, above which it marked as out-of-profile. If CIR is set to zero, then all explicit in-profile and undetermined profile packets, along with the explicit out-of-profile packets are marked as out-of-profile. The default behavior when tQosIngPolicerProfileCapped is set to 'false' is to ignore the CIR output state when an explicit in-profile packet is handled by an ingress policer.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tQosIngPolicerStatMode 1.3.6.1.4.1.6527.3.1.2.16.27.4.1.17
tQosIngPolicerStatMode specifies the mode of statistics collected by this policer.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxIngPolicerStatMode  

tQosIngPolicerSlopeStartDepth 1.3.6.1.4.1.6527.3.1.2.16.27.4.1.18
The value of tQosIngPolicerSlopeStartDepth specifies the percentage of the buffer utilized after which the drop probability starts to rise above 0.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..10000  

tQosIngPolicerSlopeMaxDepth 1.3.6.1.4.1.6527.3.1.2.16.27.4.1.19
The value of tQosIngPolicerSlopeMaxDepth specifies the percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..10000  

tQosIngPolicerSlopeMaxProb 1.3.6.1.4.1.6527.3.1.2.16.27.4.1.20
The value of tQosIngPolicerSlopeMaxProb specifies the drop probability, as a percentage, when the queue depth reaches tQosIngPolicerSlopeMaxDepth. The drop increases steadily from 0 at the tQosIngPolicerSlopeStartDepth up to the tQosIngPolicerSlopeMaxProb at the tQosIngPolicerSlopeMaxDepth.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..10000  

tQosIngPolicerSlopeMap 1.3.6.1.4.1.6527.3.1.2.16.27.4.1.21
The value of tQosIngPolicerSlopeMap specifies the slope map to be used with this policer.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxSlopeMap  

tQosIngPolicerAdvCfgPolicy 1.3.6.1.4.1.6527.3.1.2.16.27.4.1.22
The value of tQosIngPolicerAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this policer.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tQosEgrPolicerTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.98
tQosEgrPolicerTableLastChanged indicates the timestamp of last change to the tQosEgrPolicerTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tQosEgrPolicerTable 1.3.6.1.4.1.6527.3.1.2.16.27.5
tQosEgrPolicerTable defines QOS egress Policer Table for providing, via SNMP, the capability of defining the policers in the egress queue groups. tQosEgrPolicerTable holds a list of all the policers configured in the managed system. Policers must exist in this table before being referenced by the forwarding class mappings within Qos policies.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TQosEgrPolicerEntry

tQosEgrPolicerEntry 1.3.6.1.4.1.6527.3.1.2.16.27.5.1
tQosEgrPolicerEntry defines an entry in the tQosEgrPolicerTable. Entries are created/deleted in this table by SNMP sets to tQosEgrPolicerRowStatus.
Status: current Access: not-accessible
OBJECT-TYPE    
  TQosEgrPolicerEntry  

tQosEgrPolicerId 1.3.6.1.4.1.6527.3.1.2.16.27.5.1.1
tQosEgrPolicerId defines the Egress Queue Group Policer identifier. It identifies an egress queue group policer in the managed system.
Status: current Access: not-accessible
OBJECT-TYPE    
  TEgrPolicerId  

tQosEgrPolicerRowStatus 1.3.6.1.4.1.6527.3.1.2.16.27.5.1.2
tQosEgrPolicerRowStatus allows entries to be created and deleted in the tQosEgrPolicerTable.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tQosEgrPolicerLastChanged 1.3.6.1.4.1.6527.3.1.2.16.27.5.1.3
tQosEgrPolicerLastChanged indicates the value of sysUpTime when the entry was last modified.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tQosEgrPolicerDescr 1.3.6.1.4.1.6527.3.1.2.16.27.5.1.4
tQosEgrPolicerDescr specifies the description of the policer.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tQosEgrPolicerPIRAdaptation 1.3.6.1.4.1.6527.3.1.2.16.27.5.1.5
The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
Status: current Access: read-create
OBJECT-TYPE    
  TAdaptationRule  

tQosEgrPolicerCIRAdaptation 1.3.6.1.4.1.6527.3.1.2.16.27.5.1.6
The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
Status: current Access: read-create
OBJECT-TYPE    
  TAdaptationRule  

tQosEgrPolicerParent 1.3.6.1.4.1.6527.3.1.2.16.27.5.1.7
tQosEgrPolicerParent specifies the arbiter to which this policer would be feeding
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tQosEgrPolicerLevel 1.3.6.1.4.1.6527.3.1.2.16.27.5.1.8
tQosEgrPolicerLevel specifies the level of priority while feeding the parent.
Status: current Access: read-create
OBJECT-TYPE    
  TLevel  

tQosEgrPolicerWeight 1.3.6.1.4.1.6527.3.1.2.16.27.5.1.9
tQosEgrPolicerWeight specifies the weight that needs to be used by the scheduler to which this queue would be feeding.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicerWeight  

tQosEgrPolicerAdminPIR 1.3.6.1.4.1.6527.3.1.2.16.27.5.1.10
tQosEgrPolicerAdminPIR specifies the administrative PIR specified by the user.
Status: current Access: read-create
OBJECT-TYPE    
  THPolPIRRate  

tQosEgrPolicerAdminCIR 1.3.6.1.4.1.6527.3.1.2.16.27.5.1.11
tQosEgrPolicerAdminCIR specifies the administrative CIR specified by the user.
Status: current Access: read-create
OBJECT-TYPE    
  THPolCIRRate  

tQosEgrPolicerCBS 1.3.6.1.4.1.6527.3.1.2.16.27.5.1.12
tQosEgrPolicerCBS specifies the amount of reserved buffer space (in bytes) used to configure the policer's CIR leaky bucket's 'exceed' threshold.
Status: current Access: read-create
OBJECT-TYPE    
  TPlcrBurstSizeBytes  

tQosEgrPolicerMBS 1.3.6.1.4.1.6527.3.1.2.16.27.5.1.13
tQosEgrPolicerMBS specifies the maximum amount of buffer space (in bytes) used to configure the policer's PIR leaky bucket's high priority 'violate' threshold.
Status: current Access: read-create
OBJECT-TYPE    
  TPlcrBurstSizeBytes  

tQosEgrPolicerHiPrioOnly 1.3.6.1.4.1.6527.3.1.2.16.27.5.1.14
tQosEgrPolicerHiPrioOnly specifies the percentage of buffer space for the queue, used to configure the percentage of the policer's PIR leaky bucket's MBS (maximum burst size) that is reserved for high priority traffic.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstPercentOrDefault  

tQosEgrPolicerPktOffset 1.3.6.1.4.1.6527.3.1.2.16.27.5.1.15
tQosEgrPolicerPktOffset specifies the packet byte offset for addition of policing information by this policer.
Status: current Access: read-create
OBJECT-TYPE    
  TPerPacketOffset  

tQosEgrPolicerProfileCapped 1.3.6.1.4.1.6527.3.1.2.16.27.5.1.16
The value of tQosEgrPolicerProfileCapped specifies how the explicit in-profile and undetermined profile traffic should be handled at the egress policer. When the value of tQosEgrPolicerProfileCapped is set to 'true', both explicit in-profile and undetermined profile traffic is honored up to CIR, above which it is marked as out-of-profile. If CIR is set to zero, then all explicit in-profile and undetermined profile packets, along with the explicit out-of-profile packets are marked as out-of-profile. The default behavior when tQosEgrPolicerProfileCapped is set to 'false' is to ignore the CIR output state when an explicit in-profile packet is handled by an egress policer.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tQosEgrPolicerStatMode 1.3.6.1.4.1.6527.3.1.2.16.27.5.1.17
tQosEgrPolicerStatMode specifies the mode of statistics collected by this policer.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxEgrPolicerStatMode  

tQosEgrPolicerSlopeStartDepth 1.3.6.1.4.1.6527.3.1.2.16.27.5.1.18
The value of tQosEgrPolicerSlopeStartDepth specifies the percentage of the buffer utilized after which the drop probability starts to rise above 0.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..10000  

tQosEgrPolicerSlopeMaxDepth 1.3.6.1.4.1.6527.3.1.2.16.27.5.1.20
The value of tQosEgrPolicerSlopeMaxDepth specifies the percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..10000  

tQosEgrPolicerSlopeMaxProb 1.3.6.1.4.1.6527.3.1.2.16.27.5.1.21
The value of tQosEgrPolicerSlopeMaxProb specifies the drop probability, as a percentage, when the queue depth reaches tQosEgrPolicerSlopeMaxDepth. The drop increases steadily from 0 at the tQosEgrPolicerSlopeStartDepth up to the tQosEgrPolicerSlopeMaxProb at the tQosEgrPolicerSlopeMaxDepth.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..10000  

tQosEgrPolicerSlopeMap 1.3.6.1.4.1.6527.3.1.2.16.27.5.1.22
The value of tQosEgrPolicerSlopeMap specifies the slope map to be used with this policer.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxSlopeMap  

tQosEgrPolicerAdvCfgPolicy 1.3.6.1.4.1.6527.3.1.2.16.27.5.1.23
The value of tQosEgrPolicerAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this policer.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tAdvCfgPolicyTblLastChgd 1.3.6.1.4.1.6527.3.1.2.16.20.100
The value of tAdvCfgPolicyTblLastChgd indicates the timestamp of last change to the tAdvCfgPolicyTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tAdvCfgPolicyTable 1.3.6.1.4.1.6527.3.1.2.16.27.6
The tAdvCfgPolicyTable has an entry for each configuration policy for queue and policer parameters configured on this system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TAdvCfgPolicyEntry

tAdvCfgPolicyEntry 1.3.6.1.4.1.6527.3.1.2.16.27.6.1
Each row represents a particular configuration policy. Entries are created and deleted by the user.
Status: current Access: not-accessible
OBJECT-TYPE    
  TAdvCfgPolicyEntry  

tAdvCfgPolicyName 1.3.6.1.4.1.6527.3.1.2.16.27.6.1.1
The value of tAdvCfgPolicyName specifies the name of the advanced configuration policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

tAdvCfgPolicyRowStatus 1.3.6.1.4.1.6527.3.1.2.16.27.6.1.2
The value of tAdvCfgPolicyRowStatus is used for the creation and deletion of advanced configuration policies.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tAdvCfgLastChanged 1.3.6.1.4.1.6527.3.1.2.16.27.6.1.3
The value of tAdvCfgLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tAdvCfgDescription 1.3.6.1.4.1.6527.3.1.2.16.27.6.1.4
The value of tAdvCfgDescription specifies the description of this advanced configuration policy.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tAdvCfgChildAdmnPirPrcnt 1.3.6.1.4.1.6527.3.1.2.16.27.6.1.5
The value of tAdvCfgChildAdmnPirPrcnt specifies the percentage of the child's administrative PIR that should be added to the child's offered rate, capped by the child's PIR. When the value of tAdvCfgChildAdmnPirPrcnt is set to '0', offered rate increase from all child policers and queues specified by tAdvCfgPolicyName policy are removed.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..10000  

tAdvCfgChildAdminRate 1.3.6.1.4.1.6527.3.1.2.16.27.6.1.6
The value of tAdvCfgChildAdminRate specifies the explicit number of kilobits-per-second that should be added to the child's offered rate. When the value of tAdvCfgChildAdminRate is set to '0', offered rate increase from all child policers and queues specified by tAdvCfgPolicyName policy are removed.
Status: current Access: read-create
OBJECT-TYPE    
  TAdvCfgRate  

tAdvCfgOMGranPirPrcnt 1.3.6.1.4.1.6527.3.1.2.16.27.6.1.7
The value of tAdvCfgOMGranPirPrcnt specifies the granularity percentage of the child's administrative PIR that should be used as the threshold sensitivity to offered rate. When the value of tAdvCfgOMGranPirPrcnt is set to '0', it restores the default offered rate sensitivity behavior to all child policers and queues associated with the policy specified by tAdvCfgPolicyName.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..10000  

tAdvCfgOMGranRate 1.3.6.1.4.1.6527.3.1.2.16.27.6.1.8
The value of tAdvCfgOMGranRate specifies the explicit number of kilobits-per-second that should be used as the child's offered rate change sensitivity value. When the value of tAdvCfgOMGranRate is set to '0', the default offered rate sensitivity behavior to all child policers and queues associated with the policy specified by tAdvCfgPolicyName are restored.
Status: current Access: read-create
OBJECT-TYPE    
  TAdvCfgRate  

tAdvCfgMaxDecPirPrcnt 1.3.6.1.4.1.6527.3.1.2.16.27.6.1.9
The value of tAdvCfgMaxDecPirPrcnt specifies the percentage of the child's administrative PIR that should be used as the decrement limit to offered rate change. When the value of tAdvCfgMaxDecPirPrcnt is set to '10000', any currently configured maximum decrement limit for all child policers and queues associated with the policy specified by tAdvCfgPolicyName are removed.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..10000  

tAdvCfgMaxDecRate 1.3.6.1.4.1.6527.3.1.2.16.27.6.1.10
The value of tAdvCfgMaxDecRate specifies the explicit number of kilobits-per-second that should be used as the child's offered rate decrement limit value.
Status: current Access: read-create
OBJECT-TYPE    
  TMaxDecRate  

tAdvCfgHiRateHoldTime 1.3.6.1.4.1.6527.3.1.2.16.27.6.1.11
The value of tAdvCfgHiRateHoldTime specifies the time period that the current offered rate should be maintained for a child policer or queue. When tAdvCfgHiRateHoldTime is set to '0', any currently configured hold time for all child policers and queues associated with the policy specified by tAdvCfgPolicyName are removed.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..60  

tAdvCfgTimeAvgFactor 1.3.6.1.4.1.6527.3.1.2.16.27.6.1.12
The value of tAdvCfgTimeAvgFactor is used the weight the new offered rate with a portion of the pervious offered rate. When tAdvCfgTimeAvgFactor is set to '0', time average factor adjustments to new offered rate measurements specified by tAdvCfgPolicyName are removed.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..64  

tAdvCfgSampleInterval 1.3.6.1.4.1.6527.3.1.2.16.27.6.1.13
The value of tAdvCfgSampleInterval specifies the interval for sampling the child's offered rate. A value of '1' of tAdvCfgSampleInterval represents fastest sampling rate available while a value of '8' represents slowest sampling period available. When tAdvCfgSampleInterval is set to '4', time average factor adjustments to new offered rate measurements specified by tAdvCfgPolicyName are removed.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..8  

tAdvCfgFastStart 1.3.6.1.4.1.6527.3.1.2.16.27.6.1.14
The value of tAdvCfgFastStart specifies the whether fast detection of initial bandwidth on a child policer or queue associated with tAdvCfgPolicyName is enabled/disabled. When the tAdvCfgFastStart is set to 'false', the system uses the normal sampling interval behavior of both newly active and currently active children.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tAdvCfgFastStop 1.3.6.1.4.1.6527.3.1.2.16.27.6.1.15
The value of tAdvCfgFastStop specifies the whether fast detection of lack of offered rate on a child policer or queue associated with tAdvCfgPolicyName is enabled/disabled. When the tAdvCfgFastStop is set to 'false', the system uses the normal sampling interval behavior of both newly active and currently active children.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tAdvCfgAbvOffCapPirPrcnt 1.3.6.1.4.1.6527.3.1.2.16.27.6.1.16
The value of tAdvCfgAbvOffCapPirPrcnt specifies the percentage of the child's administrative PIR that should be fair share increase limit, capped by the child's PIR. When the value of tAdvCfgAbvOffCapPirPrcnt is set to '0', the system disables the fair share increase function and configures the actual distribution rate. When the value of tAdvCfgAbvOffCapPirPrcnt is set to '10000', the fair share operational PIR rate increase limit from all child policers and queues associated with tAdvCfgPolicyName policy are removed.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..10000  

tAdvCfgAbvOffCapRate 1.3.6.1.4.1.6527.3.1.2.16.27.6.1.17
The value of tAdvCfgAbvOffCapRate specifies the explicit number of kilobits-per-second that should be used as the limit to the child's fair share increase to the operational PIR. When the value of tAdvCfgAbvOffCapRate is set to '0', the system disables the fair share increase function and configures the actual distribution rate. When the value of tAdvCfgAbvOffCapRate is set to '-1', it means maximum rate.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1 | 0..100000000  

tAdvCfgBWDGranPirPrcnt 1.3.6.1.4.1.6527.3.1.2.16.27.6.1.18
The value of tAdvCfgBWDGranPirPrcnt specifies the granularity percentage of the child's administrative PIR that should be used as the rounding step value. When the value of tAdvCfgBWDGranPirPrcnt is set to '0', the system removes the operational PIR rounding behavior from all child policers and queues associated with the policy specified by tAdvCfgPolicyName.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..10000  

tAdvCfgBWDGranRate 1.3.6.1.4.1.6527.3.1.2.16.27.6.1.19
The value of tAdvCfgBWDGranRate specifies the explicit number of kilobits-per-second that should be used as the child's rounding step value. When the value of tAdvCfgBWDGranRate is set to '0', the system removes the operational PIR rounding behavior from all child policers and queues associated with the policy specified by tAdvCfgPolicyName.
Status: current Access: read-create
OBJECT-TYPE    
  TAdvCfgRate  

tAdvCfgMinOnly 1.3.6.1.4.1.6527.3.1.2.16.27.6.1.20
The value of tAdvCfgMinOnly specifies the system to interpret the increase in tAdvCfgChildAdminRate as a minimum offered rate. When the tAdvCfgFastStop is set to 'false', the system uses the specified increase in tAdvCfgChildAdmnPirPrcnt or tAdvCfgChildAdminRate as a minimum offered rate even for inactive queues or policers associated with tAdvCfgPolicyName.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tAdvCfgDecOnly 1.3.6.1.4.1.6527.3.1.2.16.27.6.1.21
The value of tAdvCfgDecOnly specifies the tAdvCfgTimeAvgFactor adjustment to be applied if the new offered rate is decreasing compared to the previous offered rate. If the new offered rate is greater than the previous offered rate, the adjustment is not applied. When the tAdvCfgDecOnly is set to 'false', it has no impact on tAdvCfgTimeAvgFactor adjustment.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tPortSchPlcyGrpTblLastChgd 1.3.6.1.4.1.6527.3.1.2.16.20.91
tPortSchPlcyGrpTblLastChgd indicates the timestamp of last change to the tPortSchPlcyGrpTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tPortSchPlcyGrpTable 1.3.6.1.4.1.6527.3.1.2.16.12.5
The tPortSchPlcyGrpTable has an entry for each port scheduler group configured on this system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TPortSchPlcyGrpEntry

tPortSchPlcyGrpEntry 1.3.6.1.4.1.6527.3.1.2.16.12.5.1
Each row represents a particular port scheduler group. Entries are created and deleted by the user.
Status: current Access: not-accessible
OBJECT-TYPE    
  TPortSchPlcyGrpEntry  

tPortSchPlcyGrpName 1.3.6.1.4.1.6527.3.1.2.16.12.5.1.1
The value of tPortSchPlcyGrpName specifies the name of the port scheduler group.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

tPortSchPlcyGrpRowStatus 1.3.6.1.4.1.6527.3.1.2.16.12.5.1.2
The value of tPortSchPlcyGrpRowStatus is used for the creation and deletion of port scheduler policies.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tPortSchPlcyGrpLastChanged 1.3.6.1.4.1.6527.3.1.2.16.12.5.1.3
The value of tPortSchPlcyGrpLastChanged indicates the value of sysUpTime at the time of the most recent management change to this row.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tPortSchPlcyGrpAdminPIR 1.3.6.1.4.1.6527.3.1.2.16.12.5.1.4
The value of tPortSchPlcyGrpAdminPIR specifies the total bandwidth limit, Admin PIR of this port scheduler group.
Status: current Access: read-create
OBJECT-TYPE    
  TPortSchedulerPIRRate  

tPortSchPlcyGrpAdminCIR 1.3.6.1.4.1.6527.3.1.2.16.12.5.1.5
The value of tPortSchPlcyGrpAdminCIR specifies the within-cir bandwidth limit of this port scheduler group.
Status: current Access: read-create
OBJECT-TYPE    
  TPortSchedulerCIR  

tPortSchPlcyLvlGrpTblLastChgd 1.3.6.1.4.1.6527.3.1.2.16.20.92
tPortSchPlcyLvlGrpTblLastChgd indicates the timestamp of last change to the tPortSchPlcyLvlGrpTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tPortSchPlcyLvlGrpTable 1.3.6.1.4.1.6527.3.1.2.16.12.6
The tPortSchPlcyLvlGrpTable has an entry for each port scheduler configured on this system for priority level group objects.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TPortSchPlcyLvlGrpEntry

tPortSchPlcyLvlGrpEntry 1.3.6.1.4.1.6527.3.1.2.16.12.6.1
Each row represents a particular port scheduler specific priority level group information.
Status: current Access: not-accessible
OBJECT-TYPE    
  TPortSchPlcyLvlGrpEntry  

tPortSchPlcyLvlGrpLastChanged 1.3.6.1.4.1.6527.3.1.2.16.12.6.1.1
The value of tPortSchPlcyLvlGrpLastChanged indicates the value of sysUpTime at the time of the most recent management change to this row.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tPortSchPlcyLvl1GrpName 1.3.6.1.4.1.6527.3.1.2.16.12.6.1.2
The value of tPortSchPlcyLvl1GrpName specifies the group associated with this scheduler policy for priority level set to '1'.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tPortSchPlcyLvl2GrpName 1.3.6.1.4.1.6527.3.1.2.16.12.6.1.3
The value of tPortSchPlcyLvl2GrpName specifies the group associated with this scheduler policy for priority level set to '2'.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tPortSchPlcyLvl3GrpName 1.3.6.1.4.1.6527.3.1.2.16.12.6.1.4
The value of tPortSchPlcyLvl3GrpName specifies the group associated with this scheduler policy for priority level set to '3'.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tPortSchPlcyLvl4GrpName 1.3.6.1.4.1.6527.3.1.2.16.12.6.1.5
The value of tPortSchPlcyLvl4GrpName specifies the group associated with this scheduler policy for priority level set to '4'.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tPortSchPlcyLvl5GrpName 1.3.6.1.4.1.6527.3.1.2.16.12.6.1.6
The value of tPortSchPlcyLvl5GrpName specifies the group associated with this scheduler policy for priority level set to '5'.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tPortSchPlcyLvl6GrpName 1.3.6.1.4.1.6527.3.1.2.16.12.6.1.7
The value of tPortSchPlcyLvl6GrpName specifies the group associated with this scheduler policy for priority level set to '6'.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tPortSchPlcyLvl7GrpName 1.3.6.1.4.1.6527.3.1.2.16.12.6.1.8
The value of tPortSchPlcyLvl7GrpName specifies the group associated with this scheduler policy for priority level set to '7'.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tPortSchPlcyLvl8GrpName 1.3.6.1.4.1.6527.3.1.2.16.12.6.1.9
The value of tPortSchPlcyLvl8GrpName specifies the group associated with this scheduler policy for priority level set to '8'.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tPortSchPlcyLvl1GrpWeight 1.3.6.1.4.1.6527.3.1.2.16.12.6.1.10
The value of tPortSchPlcyLvl1GrpWeight specifies the weight associated with the group tPortSchPlcyLvl1GrpName. An 'inconsistentValue' error is returned when this object is set to non-default value and tPortSchPlcyLvl1GrpName is set to a default value.
Status: current Access: read-create
OBJECT-TYPE    
  TNonZeroWeight  

tPortSchPlcyLvl2GrpWeight 1.3.6.1.4.1.6527.3.1.2.16.12.6.1.11
The value of tPortSchPlcyLvl2GrpWeight specifies the weight associated with the group tPortSchPlcyLvl2GrpName. An 'inconsistentValue' error is returned when this object is set to non-default value and tPortSchPlcyLvl2GrpName is set to a default value.
Status: current Access: read-create
OBJECT-TYPE    
  TNonZeroWeight  

tPortSchPlcyLvl3GrpWeight 1.3.6.1.4.1.6527.3.1.2.16.12.6.1.12
The value of tPortSchPlcyLvl1GrpWeight specifies the weight associated with the group tPortSchPlcyLvl3GrpName. An 'inconsistentValue' error is returned when this object is set to non-default value and tPortSchPlcyLvl3GrpName is set to a default value.
Status: current Access: read-create
OBJECT-TYPE    
  TNonZeroWeight  

tPortSchPlcyLvl4GrpWeight 1.3.6.1.4.1.6527.3.1.2.16.12.6.1.13
The value of tPortSchPlcyLvl4GrpWeight specifies the weight associated with the group tPortSchPlcyLvl4GrpName. An 'inconsistentValue' error is returned when this object is set to non-default value and tPortSchPlcyLvl4GrpName is set to a default value.
Status: current Access: read-create
OBJECT-TYPE    
  TNonZeroWeight  

tPortSchPlcyLvl5GrpWeight 1.3.6.1.4.1.6527.3.1.2.16.12.6.1.14
The value of tPortSchPlcyLvl5GrpWeight specifies the weight associated with the group tPortSchPlcyLvl5GrpName. An 'inconsistentValue' error is returned when this object is set to non-default value and tPortSchPlcyLvl5GrpName is set to a default value.
Status: current Access: read-create
OBJECT-TYPE    
  TNonZeroWeight  

tPortSchPlcyLvl6GrpWeight 1.3.6.1.4.1.6527.3.1.2.16.12.6.1.15
The value of tPortSchPlcyLvl6GrpWeight specifies the weight associated with the group tPortSchPlcyLvl6GrpName. An 'inconsistentValue' error is returned when this object is set to non-default value and tPortSchPlcyLvl6GrpName is set to a default value.
Status: current Access: read-create
OBJECT-TYPE    
  TNonZeroWeight  

tPortSchPlcyLvl7GrpWeight 1.3.6.1.4.1.6527.3.1.2.16.12.6.1.16
The value of tPortSchPlcyLvl7GrpWeight specifies the weight associated with the group tPortSchPlcyLvl7GrpName. An 'inconsistentValue' error is returned when this object is set to non-default value and tPortSchPlcyLvl7GrpName is set to a default value.
Status: current Access: read-create
OBJECT-TYPE    
  TNonZeroWeight  

tPortSchPlcyLvl8GrpWeight 1.3.6.1.4.1.6527.3.1.2.16.12.6.1.17
The value of tPortSchPlcyLvl8GrpWeight specifies the weight associated with the group tPortSchPlcyLvl8GrpName. An 'inconsistentValue' error is returned when this object is set to non-default value and tPortSchPlcyLvl8GrpName is set to a default value.
Status: current Access: read-create
OBJECT-TYPE    
  TNonZeroWeight  

tHsmdaWrrPolicyTblLastChgd 1.3.6.1.4.1.6527.3.1.2.16.20.93
The value of tHsmdaWrrPolicyTblLastChgd indicates the timestamp of last change to the tHsmdaWrrPolicyTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tHsmdaWrrPolicyTable 1.3.6.1.4.1.6527.3.1.2.16.28.1
The tHsmdaWrrPolicyTable contains the information of the Weighted Round Robin (WRR) policies configured on HSDMA queues.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    THsmdaWrrPolicyEntry

tHsmdaWrrPolicyEntry 1.3.6.1.4.1.6527.3.1.2.16.28.1.1
Each row in tHsmdaWrrPolicyEntry represents a HSMDA Weighted Round Robin (WRR) policy specified by tHsmdaWrrPolicyName.
Status: current Access: not-accessible
OBJECT-TYPE    
  THsmdaWrrPolicyEntry  

tHsmdaWrrPolicyName 1.3.6.1.4.1.6527.3.1.2.16.28.1.1.1
The value of tHsmdaWrrPolicyName specifies the name of the Weighted Round Robin (WRR) policy associated with this HSDMA queue.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

tHsmdaWrrPolicyRowStatus 1.3.6.1.4.1.6527.3.1.2.16.28.1.1.2
The value of tHsmdaWrrPolicyRowStatus is used for the creation and deletion of entries in the tHsmdaWrrPolicyTable.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tHsmdaWrrPolicyLastChanged 1.3.6.1.4.1.6527.3.1.2.16.28.1.1.3
The value of tHsmdaWrrPolicyLastChanged indicates the sysUpTime for the last change to this row.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tHsmdaWrrPolicyDescription 1.3.6.1.4.1.6527.3.1.2.16.28.1.1.4
The value of tHsmdaWrrPolicyDescription specifies the description of the Weighted Round Robin (WRR) policy on this HSMDA queue.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tHsmdaWrrPolicyIncludeQueues 1.3.6.1.4.1.6527.3.1.2.16.28.1.1.5
The value of tHsmdaWrrPolicyIncludeQueues specifies the queues that can be scheduled in the same class in a Weighted Round Robin (WRR) fashion within the HSMDA scheduler.
Status: current Access: read-create
OBJECT-TYPE    
  THsmdaPolicyIncludeQueues  

tHsmdaWrrPolicySchedUsingClass 1.3.6.1.4.1.6527.3.1.2.16.28.1.1.6
The value of tHsmdaWrrPolicySchedUsingClass specifies which class to schedule the queues specified by tHsmdaWrrPolicyIncludeQueues within the HSMDA scheduler.
Status: current Access: read-create
OBJECT-TYPE    
  THsmdaPolicyScheduleClass  

tHsmdaWrrPolicyAggWeightAtClass 1.3.6.1.4.1.6527.3.1.2.16.28.1.1.7
The value of tHsmdaWrrPolicyAggWeightAtClass specifies the weight assigned to the group of queues specified by tHsmdaWrrPolicyIncludeQueues within the HSMDA scheduler.
Status: current Access: read-create
OBJECT-TYPE    
  THsmdaWeightClass  

tNetworkIngressFCTableLstChanged 1.3.6.1.4.1.6527.3.1.2.16.20.101
The value of tNetworkIngressFCTableLstChanged indicates the timestamp of last change to the tNetworkIngressFCTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tNetworkIngressFCTable 1.3.6.1.4.1.6527.3.1.2.16.5.8
Information about all network policies' ingress FC traffic disposition.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TNetworkIngressFCEntry

tNetworkIngressFCEntry 1.3.6.1.4.1.6527.3.1.2.16.5.8.1
Information about a particular network policy's ingress per-forwarding-class traffic disposition. Entries are created/deleted as an action of creating/deleting a row in the tNetworkPolicyTable. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNetworkIngressFCEntry  

tNetworkIngressFCName 1.3.6.1.4.1.6527.3.1.2.16.5.8.1.1
The value of tNetworkIngressFCName specifies the name of the forwarding class (FC).
Status: current Access: not-accessible
OBJECT-TYPE    
  TFCName  

tNetworkIngressFCLastChanged 1.3.6.1.4.1.6527.3.1.2.16.5.8.1.2
The value of tNetworkIngressFCLastChanged indicates the sysUpTime for the last change to this entry.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tNetworkIngressFCMultiCastPlcr 1.3.6.1.4.1.6527.3.1.2.16.5.8.1.3
The value of tNetworkIngressFCMultiCastPlcr specifies the policer to be used for multicast traffic for this forwarding-class.
Status: current Access: read-write
OBJECT-TYPE    
  TIngPolicerIdOrNone  

tNetworkIngressFCUniCastPlcr 1.3.6.1.4.1.6527.3.1.2.16.5.8.1.4
The value of tNetworkIngressFCUniCastPlcr specifies the policer to be used for unicast traffic for this forwarding-class.
Status: current Access: read-write
OBJECT-TYPE    
  TIngPolicerIdOrNone  

tNetworkEgrDSCPTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.102
The value of tNetworkEgrDSCPTableLastChanged indicates the timestamp of last change to the tNetworkEgressDSCPTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tNetworkEgressDSCPTable 1.3.6.1.4.1.6527.3.1.2.16.5.9
tNetworkEgressDSCPTable lists all DSCP entries for all network egress policies.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TNetworkEgressDSCPEntry

tNetworkEgressDSCPEntry 1.3.6.1.4.1.6527.3.1.2.16.5.9.1
The tNetworkEgressDSCPEntry defines a particular DSCP entry for a network egress policy. Some default entries are created by the agent for the default network policy (1). These cannot be deleted or modified. Other entries are created/deleted by user. In the event that one policy has multiple entries, and the tNetworkEgressDSCP values are the same, only one queue will be created (the queue for the lexicographically first tNetworkEgressDSCP).
Status: current Access: not-accessible
OBJECT-TYPE    
  TNetworkEgressDSCPEntry  

tNetworkEgressDSCP 1.3.6.1.4.1.6527.3.1.2.16.5.9.1.1
The value of tNetworkEgressDSCP indicates the DSCP value for which the mapping is done. It is used as a secondary index for tNetworkEgressDSCPTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  TDSCPName  

tNetworkEgressDSCPRowStatus 1.3.6.1.4.1.6527.3.1.2.16.5.9.1.2
The value of tNetworkEgressDSCPRowStatus is used for the creation and the deletion of rows in this table. The value of tNetworkEgressDSCPProfile must be specified when row is created.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tNetworkEgressDSCPLastChanged 1.3.6.1.4.1.6527.3.1.2.16.5.9.1.3
The value of tNetworkEgressDSCPLastChanged indicates the sysUpTime at the time of the most recent management-initiated change to this table row.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tNetworkEgressDSCPFC 1.3.6.1.4.1.6527.3.1.2.16.5.9.1.4
The value of tNetworkEgressDSCPFC will overwrite the forwarding class derived from ingress. The new forwarding class is used for egress remarking and queue mapping decisions.
Status: current Access: read-create
OBJECT-TYPE    
  TFCName  

tNetworkEgressDSCPProfile 1.3.6.1.4.1.6527.3.1.2.16.5.9.1.5
The value of tNetworkEgressDSCPProfile specifies the egress classification rule that will overwrite the profile of the packet derived from the ingress. The new profile value is used for egress remarking and queue congestion behavior. There is no DEFVAL for tNetworkEgressDSCPProfile. It must be set at the time of row creation.
Status: current Access: read-create
OBJECT-TYPE    
  TProfile  

tNetworkEgrPrecTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.103
The value of tNetworkEgrPrecTableLastChanged indicates the timestamp of last change to the tNetworkEgressPrecTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tNetworkEgressPrecTable 1.3.6.1.4.1.6527.3.1.2.16.5.10
The tNetworkEgressPrecTable table maintains the mapping of a particular precedence value into a forwarding class
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TNetworkEgressPrecEntry

tNetworkEgressPrecEntry 1.3.6.1.4.1.6527.3.1.2.16.5.10.1
The tNetworkEgressPrecEntry defines a particular network egress policy's IP precedence values to forwarding class mappings. Entries are created and deleted by user.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNetworkEgressPrecEntry  

tNetworkEgressPrecValue 1.3.6.1.4.1.6527.3.1.2.16.5.10.1.1
The value of tNetworkEgressPrecValue indicates the precedence value for which the mapping is done. It is used as a secondary index for tNetworkEgressPrecTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  TPrecValue  

tNetworkEgressPrecRowStatus 1.3.6.1.4.1.6527.3.1.2.16.5.10.1.2
The value of tNetworkEgressPrecRowStatus is used for the creation and the deletion of rows in this table. The value of tNetworkEgressPrecProfile must be specified when row is created.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tNetworkEgressPrecLastChanged 1.3.6.1.4.1.6527.3.1.2.16.5.10.1.3
The value of tNetworkEgressPrecLastChanged indicates the sysUpTime at the time of the most recent management-initiated change to this table row.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tNetworkEgressPrecFC 1.3.6.1.4.1.6527.3.1.2.16.5.10.1.4
The value of tNetworkEgressPrecFC will overwrite the forwarding class derived from egress. The new forwarding class is used for egress remarking and queue mapping decisions.
Status: current Access: read-create
OBJECT-TYPE    
  TFCName  

tNetworkEgressPrecProfile 1.3.6.1.4.1.6527.3.1.2.16.5.10.1.5
The value of tNetworkEgressPrecProfile specifies the egress classification rule that will overwrite the profile of the packet derived from the egress. The new profile value is used for egress remarking and queue congestion behavior. There is no DEFVAL for tNetworkEgressPrecProfile. It must be set at the time of row creation.
Status: current Access: read-create
OBJECT-TYPE    
  TProfile  

tmnxQosCompliances 1.3.6.1.4.1.6527.3.1.1.16.1
OBJECT IDENTIFIER    

tmnxQosGroups 1.3.6.1.4.1.6527.3.1.1.16.2
OBJECT IDENTIFIER    

tmnxQos7450V4v0Compliance 1.3.6.1.4.1.6527.3.1.1.16.1.4
The compliance statement for management of QOS features on Alcatel-Lucent 7450 ESS series systems release R4.0.
Status: obsolete Access: read-create
MODULE-COMPLIANCE    

tmnxQos7750V4v0Compliance 1.3.6.1.4.1.6527.3.1.1.16.1.5
The compliance statement for management of QOS features on Alcatel-Lucent SROS series systems release R4.0.
Status: obsolete Access: read-create
MODULE-COMPLIANCE    

tmnxQos7450V5v0Compliance 1.3.6.1.4.1.6527.3.1.1.16.1.6
The compliance statement for management of QOS features on Alcatel-Lucent 7450 ESS series systems release R5.0.
Status: obsolete Access: read-create
MODULE-COMPLIANCE    

tmnxQos7750V5v0Compliance 1.3.6.1.4.1.6527.3.1.1.16.1.7
The compliance statement for management of QOS features on Alcatel-Lucent SROS series systems release R5.0.
Status: obsolete Access: read-create
MODULE-COMPLIANCE    

tmnxQos7450V6v0Compliance 1.3.6.1.4.1.6527.3.1.1.16.1.8
The compliance statement for management of QOS features on Alcatel-Lucent 7450 ESS series systems release R6.0.
Status: obsolete Access: read-create
MODULE-COMPLIANCE    

tmnxQos7750V6v0Compliance 1.3.6.1.4.1.6527.3.1.1.16.1.9
The compliance statement for management of QOS features on Alcatel-Lucent SROS series systems release R6.0.
Status: obsolete Access: read-create
MODULE-COMPLIANCE    

tmnxQos7450V6v1Compliance 1.3.6.1.4.1.6527.3.1.1.16.1.10
The compliance statement for management of QOS features on Alcatel-Lucent 7450 ESS series systems release R6.1.
Status: obsolete Access: read-create
MODULE-COMPLIANCE    

tmnxQos77x0V6v1Compliance 1.3.6.1.4.1.6527.3.1.1.16.1.11
The compliance statement for management of QOS features on Alcatel-Lucent SROS series systems release R6.1.
Status: obsolete Access: read-create
MODULE-COMPLIANCE    

tmnxQos7450V7v0Compliance 1.3.6.1.4.1.6527.3.1.1.16.1.12
The compliance statement for management of QOS features on Alcatel-Lucent 7450 ESS series systems release R6.1.
Status: obsolete Access: read-create
MODULE-COMPLIANCE    

tmnxQos77x0V7v0Compliance 1.3.6.1.4.1.6527.3.1.1.16.1.13
The compliance statement for management of QOS features on Alcatel-Lucent 7750 SROS series systems release R6.1.
Status: obsolete Access: read-create
MODULE-COMPLIANCE    

tmnxQos7450V8v0Compliance 1.3.6.1.4.1.6527.3.1.1.16.1.14
The compliance statement for management of QOS features on Alcatel-Lucent 7450 ESS series systems release R8.0.
Status: obsolete Access: read-create
MODULE-COMPLIANCE    

tmnxQos77x0V8v0Compliance 1.3.6.1.4.1.6527.3.1.1.16.1.15
The compliance statement for management of QOS features on Alcatel-Lucent SROS series systems release R8.0.
Status: obsolete Access: read-create
MODULE-COMPLIANCE    

tmnxQos77x0V9v0Compliance 1.3.6.1.4.1.6527.3.1.1.16.1.16
The compliance statement for management of QOS features on Alcatel-Lucent SROS series systems release R9.0.
Status: obsolete Access: read-create
MODULE-COMPLIANCE    

tmnxQos7450V10v0Compliance 1.3.6.1.4.1.6527.3.1.1.16.1.17
The compliance statement for management of QOS features on Alcatel-Lucent 7450 ESS series systems release R10.0.
Status: current Access: read-create
MODULE-COMPLIANCE    

tmnxQos77x0V10v0Compliance 1.3.6.1.4.1.6527.3.1.1.16.1.18
The compliance statement for management of QOS features on Alcatel-Lucent SROS series systems release R10.0.
Status: current Access: read-create
MODULE-COMPLIANCE    

tmnxQosGlobalGroup 1.3.6.1.4.1.6527.3.1.1.16.2.1
The group of objects supporting general management of QOS features on Alcatel-Lucent SROS series systems.
Status: current Access: read-create
OBJECT-GROUP    

tmnxQosDSCPGroup 1.3.6.1.4.1.6527.3.1.1.16.2.2
The group of objects supporting management of Differential Services Code Points on Alcatel-Lucent SROS series systems.
Status: current Access: read-create
OBJECT-GROUP    

tmnxQosFCGroup 1.3.6.1.4.1.6527.3.1.1.16.2.3
The group of objects supporting management of Forwarding Classes on Alcatel-Lucent SROS series systems.
Status: current Access: read-create
OBJECT-GROUP    

tmnxQosSlopeGroup 1.3.6.1.4.1.6527.3.1.1.16.2.7
The group of objects supporting management of Slope policies on Alcatel-Lucent SROS series systems.
Status: current Access: read-create
OBJECT-GROUP    

tmnxQosSchedulerGroup 1.3.6.1.4.1.6527.3.1.1.16.2.8
The group of objects supporting management of Scheduler policies on Alcatel-Lucent SROS series systems.
Status: obsolete Access: read-create
OBJECT-GROUP    

tQosObsoleteObjectsGroup 1.3.6.1.4.1.6527.3.1.1.16.2.10
The group of obsolete objects in the TIMETRA-QOS-MIB.
Status: current Access: read-create
OBJECT-GROUP    

tmnxQosSapEgressR2r1Group 1.3.6.1.4.1.6527.3.1.1.16.2.12
The group of objects supporting management of SAP egress QoS policies on Alcatel-Lucent SROS series systems.
Status: obsolete Access: read-create
OBJECT-GROUP    

tmnxQosNetworkR2r1Group 1.3.6.1.4.1.6527.3.1.1.16.2.13
The group of objects supporting management of Network QoS policies on Alcatel-Lucent SROS series systems.
Status: obsolete Access: read-create
OBJECT-GROUP    

tmnxQosAtmTdpV3v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.15
The group of objects for ATM Traffic Descriptor Profiles on Alcatel-Lucent SROS series systems release 3.0.
Status: obsolete Access: read-create
OBJECT-GROUP    

tmnxQosSapIpv6FilterR4r0Group 1.3.6.1.4.1.6527.3.1.1.16.2.16
The group of objects for Qos Policies related to IPv6 on Alcatel-Lucent SROS series systems release 4.0.
Status: current Access: read-create
OBJECT-GROUP    

tmnxQosQueueV4v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.18
The group of objects supporting management of QoS queue policies on Alcatel-Lucent SROS series systems release 4.0.
Status: current Access: read-create
OBJECT-GROUP    

tmnxQosSapIngressV4v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.19
The group of objects supporting management of SAP ingress QoS policies on Alcatel-Lucent SROS series systems release 4.0.
Status: obsolete Access: read-create
OBJECT-GROUP    

tmnxQosSchedulerV5v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.20
The group of objects supporting management of Scheduler policies on Alcatel-Lucent SROS series systems.
Status: current Access: read-create
OBJECT-GROUP    

tmnxQosSapEgressV5v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.21
The group of objects supporting management of SAP egress QoS policies on Alcatel-Lucent SROS series systems.
Status: obsolete Access: read-create
OBJECT-GROUP    

tmnxQosNetworkV5v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.22
The group of objects supporting management of Network QoS policies on Alcatel-Lucent SROS series systems.
Status: obsolete Access: read-create
OBJECT-GROUP    

tmnxQosHsmdaV6v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.23
The group of objects supporting management of QoS policies for HSMDA MDAs on Alcatel-Lucent SROS series systems release 6.0.
Status: obsolete Access: read-create
OBJECT-GROUP    

tmnxQosAtmTdpV5v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.24
The group of objects for ATM Traffic Descriptor Profiles on Alcatel-Lucent SROS series systems release 5.0.
Status: current Access: read-create
OBJECT-GROUP    

tmnxQosSapIngressV6v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.25
The group of objects supporting management of SAP ingress QoS policies on Alcatel-Lucent SROS series systems release 6.0.
Status: obsolete Access: read-create
OBJECT-GROUP    

tmnxQosSapEgressV6v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.26
The group of objects supporting management of SAP egress QoS policies on Alcatel-Lucent SROS series systems.
Status: obsolete Access: read-create
OBJECT-GROUP    

tmnxQosNetworkV6v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.27
The group of objects supporting management of Network QoS policies on Alcatel-Lucent SROS series systems.
Status: obsolete Access: read-create
OBJECT-GROUP    

tmnxQosFrameBasedV6v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.28
The group of objects supporting management of frame-based queue accounting on Alcatel-Lucent SROS series systems release 6.0.
Status: current Access: read-create
OBJECT-GROUP    

tmnxQosObsoletedV6v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.29
The group of obsolete objects for the QoS on Alcatel-Lucent SROS series systems.
Status: current Access: read-create
OBJECT-GROUP    

tmnxQosNamedPoolPolicyV6v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.30
The group of objects for the named pool policy on Alcatel-Lucent SROS series systems.
Status: current Access: read-create
OBJECT-GROUP    

tmnxQosMcMlpppIngrGroup 1.3.6.1.4.1.6527.3.1.1.16.2.31
The group of objects for the multi-class mlppp ingress information on Alcatel-Lucent SROS series systems.
Status: current Access: read-create
OBJECT-GROUP    

tmnxQosMcMlpppEgrGroup 1.3.6.1.4.1.6527.3.1.1.16.2.32
The group of objects for the multi-class mlppp egress information on Alcatel-Lucent SROS series systems.
Status: current Access: read-create
OBJECT-GROUP    

tmnxQosQueueObjGroup 1.3.6.1.4.1.6527.3.1.1.16.2.33
The group of objects for the multi-class mlppp egress information on Alcatel-Lucent SROS series systems.
Status: obsolete Access: read-create
OBJECT-GROUP    

tQosQGrpFCGroup 1.3.6.1.4.1.6527.3.1.1.16.2.34
The group of objects for the multi-class mlppp egress information on Alcatel-Lucent SROS series systems.
Status: current Access: read-create
OBJECT-GROUP    

tmnxQosNetworkV7v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.35
The group of objects supporting management of Network QoS policies on Alcatel-Lucent SROS series systems.
Status: current Access: read-create
OBJECT-GROUP    

tmnxQosHsmdaV7v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.36
The group of objects supporting management of QoS policies for QMDA MDAs on Alcatel-Lucent SROS series systems release 7.0.
Status: obsolete Access: read-create
OBJECT-GROUP    

tmnxQosSapAtmV7v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.37
The group of objects supporting management of SAP ATM related QoS policies for Alcatel-Lucent SROS series systems release 7.0.
Status: current Access: read-create
OBJECT-GROUP    

tmnxQosMcFrIngrGroup 1.3.6.1.4.1.6527.3.1.1.16.2.38
The group of objects for the multi-class Fr ingress information on Alcatel-Lucent SROS series systems.
Status: current Access: read-create
OBJECT-GROUP    

tmnxQosMcFrEgrGroup 1.3.6.1.4.1.6527.3.1.1.16.2.39
The group of objects for the multi-class Fr egress information on Alcatel-Lucent SROS series systems.
Status: current Access: read-create
OBJECT-GROUP    

tmnxQosSapEgrQWredGroup 1.3.6.1.4.1.6527.3.1.1.16.2.40
The group of objects for the WRED specific SAP egress queue information on Alcatel-Lucent SROS series systems.
Status: current Access: read-create
OBJECT-GROUP    

tmnxQosSapIngressV8v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.41
The group of objects supporting management of SAP ingress QoS policies on Alcatel-Lucent SROS series systems release 8.0.
Status: obsolete Access: read-create
OBJECT-GROUP    

tmnxQosPolicerV8v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.42
The group of objects supporting management of Policer specific objects on Alcatel-Lucent SROS series systems release 8.0.
Status: current Access: read-create
OBJECT-GROUP    

tQosQGrpV8v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.43
The group of objects supporting the management of QOS Queue Groups on Alcatel-Lucent SROS series systems release 8.0.
Status: current Access: read-create
OBJECT-GROUP    

tQosFCQGrpFC8v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.44
The group of objects for the SAP egress information on Alcatel-Lucent SROS series systems.
Status: current Access: read-create
OBJECT-GROUP    

tmnxQosSapEgressV8v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.45
The group of objects supporting management of SAP egress QoS policies on Alcatel-Lucent SROS series systems.
Status: current Access: read-create
OBJECT-GROUP    

tmnxQosQueueObjV8v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.46
The group of objects for the multi-class mlppp egress information on Alcatel-Lucent SROS series systems.
Status: current Access: read-create
OBJECT-GROUP    

tmnxQosObsoletedV8v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.47
The group of obsolete objects for the QoS on Alcatel-Lucent SROS series systems.
Status: current Access: read-create
OBJECT-GROUP    

tmnxQosPortSchPlcyGrpGroup 1.3.6.1.4.1.6527.3.1.1.16.2.48
The group of objects supporting Port Scheduler Policy Group objects for the QoS on Alcatel-Lucent SROS series systems.
Status: current Access: read-create
OBJECT-GROUP    

tmnxQosSchedulerV8v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.49
The group of objects supporting management of Scheduler policies on Alcatel-Lucent SROS series systems.
Status: current Access: read-create
OBJECT-GROUP    

tmnxQosBurstLimitGroup 1.3.6.1.4.1.6527.3.1.1.16.2.50
The group of objects supporting Burst-size management objects for the QoS on Alcatel-Lucent SROS series systems.
Status: current Access: read-create
OBJECT-GROUP    

tmnxQosMacCritVidFltrV9v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.51
The group of objects supporting management of mac VID filtering objects on Alcatel-Lucent SROS series systems 9.0 release.
Status: current Access: read-create
OBJECT-GROUP    

tmnxQosSapEgressV9v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.52
The group of objects supporting management of SAP egress QoS policies on Alcatel-Lucent SROS series systems 9.0 release.
Status: current Access: read-create
OBJECT-GROUP    

tmnxQosSapIngressV9v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.53
The group of objects supporting management of SAP ingress QoS policies on Alcatel-Lucent SROS series systems 9.0 release.
Status: current Access: read-create
OBJECT-GROUP    

tmnxQosPolicerV9v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.54
The group of objects supporting management of Policer specific objects on Alcatel-Lucent SROS series systems release 9.0.
Status: current Access: read-create
OBJECT-GROUP    

tmnxQosAtmTdpV9v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.55
The group of objects for ATM Traffic Descriptor Profiles added in release 9.0 of SROS.
Status: current Access: read-create
OBJECT-GROUP    

tmnxQosHsmdaV9v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.56
The group of objects supporting management of QoS policies for QMDA MDAs on Alcatel-Lucent SROS series systems release 9.0.
Status: current Access: read-create
OBJECT-GROUP    

tmnxQosNetworkV9v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.57
The group of objects supporting management of Network QoS policies on Alcatel-Lucent SROS series systems release 9.0.
Status: current Access: read-create
OBJECT-GROUP    

tmnxQosNamedPoolV9v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.58
The group of objects supporting management of Network Named Pool policies on Alcatel-Lucent SROS series systems release 9.0.
Status: current Access: read-create
OBJECT-GROUP    

tmnxQosHsmdaObsoletedV9v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.59
The group of objects obsoleted supporting management of QoS policies for HSMDA MDAs on Alcatel-Lucent SROS series systems release 9.0.
Status: current Access: read-create
OBJECT-GROUP    

tmnxQosPolicyV10v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.60
The group of objects supporting management of Network QoS policies on Alcatel-Lucent SROS series systems release 10.0.
Status: current Access: read-create
OBJECT-GROUP    

tmnxQosQueueGrpPolcrV10v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.61
The group of objects supporting management of Network QoS policies on Alcatel-Lucent SROS series systems release 10.0.
Status: current Access: read-create
OBJECT-GROUP    

tmnxQosEgrReClassifyV10v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.62
The group of objects supporting management of QoS Egress policies on Alcatel-Lucent SROS series systems release 10.0.
Status: current Access: read-create
OBJECT-GROUP    

tmnxQosPolicerSlopeGroup 1.3.6.1.4.1.6527.3.1.1.16.2.63
The group of objects supporting management of QoS policer slope on Alcatel-Lucent SROS series systems release 10.0.
Status: current Access: read-create
OBJECT-GROUP    

tmnxQosAdvConfigV10v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.64
The group of objects supporting management of QoS policer and queue advanced configuration parameters on Alcatel-Lucent SROS series systems release 10.0.
Status: current Access: read-create
OBJECT-GROUP    

tmnxQosHsmdaV10v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.65
The group of objects supporting management of QoS policies for QMDA MDAs on Alcatel-Lucent SROS series systems release 10.0.
Status: current Access: read-create
OBJECT-GROUP    

tmnxQosNetworkV10v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.66
The group of objects supporting management of Network QoS policies on Alcatel-Lucent SROS series systems release 10.0.
Status: current Access: read-create
OBJECT-GROUP    

tmnxQosSapIngressV10v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.68
The group of objects supporting management of SAP ingress QoS policies on Alcatel-Lucent SROS series systems release 10.0.
Status: current Access: read-create
OBJECT-GROUP    

tmnxQosHsmdaObsoletedV10v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.69
The group of objects obsoleted supporting management of QoS policies for HSMDA MDAs on Alcatel-Lucent SROS series systems release 10.0.
Status: current Access: read-create
OBJECT-GROUP