TIMETRA-MPLS-TP-MIB
File:
TIMETRA-MPLS-TP-MIB.mib (79044 bytes)
Imported modules
Imported symbols
Defined Types
VRtrMplsTpLspPathMepPduType |
|
The VRtrMplsTpLspPathMepPduType specifies the 4 byte APS-specific
information within each MPLS-TP APS PDU.
The information is encoded as shown below.
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|Ver|Request|PT |R| Reserved1 | FPath | Path |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |
TEXTUAL-CONVENTION |
|
|
|
|
OCTET STRING |
Size(4) |
|
VRtrMplsTpSystemEntry |
|
SEQUENCE |
|
|
|
|
vRtrMplsTpRowStatus |
RowStatus |
|
|
vRtrMplsTpGlobalId |
TmnxMplsTpGlobalID |
|
|
vRtrMplsTpNodeId |
TmnxMplsTpNodeID |
|
|
vRtrMplsTpTunnelIdMin |
Unsigned32 |
|
|
vRtrMplsTpTunnelIdMax |
Unsigned32 |
|
|
vRtrMplsTpAdminState |
TmnxAdminState |
|
|
vRtrMplsTpInheritance |
BITS |
|
VRtrMplsTpOamTemplateCfgEntry |
|
SEQUENCE |
|
|
|
|
vRtrMplsTpOamTmplName |
TNamedItem |
|
|
vRtrMplsTpOamTmplRowStatus |
RowStatus |
|
|
vRtrMplsTpOamTmplLastChangedTime |
TimeStamp |
|
|
vRtrMplsTpOamTmplBfdTemplateName |
TNamedItemOrEmpty |
|
|
vRtrMplsTpOamTmplHoldTimeDown |
Unsigned32 |
|
|
vRtrMplsTpOamTmplHoldTimeUp |
Unsigned32 |
|
VRtrMplsTpPtcTemplateCfgEntry |
|
SEQUENCE |
|
|
|
|
vRtrMplsTpPtcTmplName |
TNamedItem |
|
|
vRtrMplsTpPtcTmplRowStatus |
RowStatus |
|
|
vRtrMplsTpPtcTmplLastChangedTime |
TimeStamp |
|
|
vRtrMplsTpPtcTmplProtectionMode |
INTEGER |
|
|
vRtrMplsTpPtcTmplProtectionDir |
INTEGER |
|
|
vRtrMplsTpPtcTmplRevertive |
INTEGER |
|
|
vRtrMplsTpPtcTmplWaitToRestore |
Unsigned32 |
|
|
vRtrMplsTpPtcTmplRapidPscTimer |
Unsigned32 |
|
|
vRtrMplsTpPtcTmplSlowPscTimer |
Unsigned32 |
|
VRtrMplsTpLspPathEntry |
|
SEQUENCE |
|
|
|
|
vRtrMplsTpLspPathIndex |
INTEGER |
|
|
vRtrMplsTpLspPathRowStatus |
RowStatus |
|
|
vRtrMplsTpLspPathLastChangedTime |
TimeStamp |
|
|
vRtrMplsTpLspPathAdminState |
TmnxAdminState |
|
|
vRtrMplsTpLspPathOperState |
TmnxOperState |
|
|
vRtrMplsTpLspPathReasonDownFlags |
BITS |
|
|
vRtrMplsTpLspPathLspNumber |
Unsigned32 |
|
|
vRtrMplsTpLspPathInLabel |
Unsigned32 |
|
|
vRtrMplsTpLspPathOutLabel |
Unsigned32 |
|
|
vRtrMplsTpLspPathOutLink |
InterfaceIndexOrZero |
|
|
vRtrMplsTpLspPathNextHopAddrType |
InetAddressType |
|
|
vRtrMplsTpLspPathNextHopAddress |
InetAddress |
|
|
vRtrMplsTpLspPathState |
INTEGER |
|
|
vRtrMplsTpLspPathTimeUp |
TimeInterval |
|
|
vRtrMplsTpLspPathTimeDown |
TimeInterval |
|
|
vRtrMplsTpLspPathActiveTimeUp |
TimeInterval |
|
VRtrMplsTpLspPathMepEntry |
|
SEQUENCE |
|
|
|
|
vRtrMplsTpLspPathMepLastChgTime |
TimeStamp |
|
|
vRtrMplsTpLspPathMepRowStatus |
RowStatus |
|
|
vRtrMplsTpLspPathMepAdminState |
TmnxAdminState |
|
|
vRtrMplsTpLspPathMepProtectTmpl |
TNamedItemOrEmpty |
|
|
vRtrMplsTpLspPathMepOamTmpl |
TNamedItemOrEmpty |
|
|
vRtrMplsTpLspPathMepBfdEnabled |
INTEGER |
|
|
vRtrMplsTpLspPathMepBfdOperState |
TmnxOperState |
|
VRtrMplsTpLspPtPathMepStatEntry |
|
SEQUENCE |
|
|
|
|
vRtrMplsTpLspPtPathMepRxPdu |
VRtrMplsTpLspPathMepPduType |
|
|
vRtrMplsTpLspPtPathMepTxPdu |
VRtrMplsTpLspPathMepPduType |
|
|
vRtrMplsTpLspPtPathMepDefects |
BITS |
|
|
vRtrMplsTpLspPtPathMepWTRTimer |
Counter32 |
|
VRtrMplsTpTunnelCommandEntry |
|
SEQUENCE |
|
|
|
|
vRtrMplsTpTunnelCommandSwitch |
INTEGER |
|
VRtrMplsTpLsrCfgEntry |
|
SEQUENCE |
|
|
|
|
vRtrMplsTpLsrPathName |
TNamedItem |
|
|
vRtrMplsTpLsrRowStatus |
RowStatus |
|
|
vRtrMplsTpLsrLastChangedTime |
TimeStamp |
|
|
vRtrMplsTpLsrAdminState |
TmnxAdminState |
|
|
vRtrMplsTpLsrOperState |
TmnxOperState |
|
|
vRtrMplsTpLsrFPInLabel |
Unsigned32 |
|
|
vRtrMplsTpLsrFPOutLabel |
Unsigned32 |
|
|
vRtrMplsTpLsrFPOutLink |
InterfaceIndexOrZero |
|
|
vRtrMplsTpLsrFPNextHopAddrType |
InetAddressType |
|
|
vRtrMplsTpLsrFPNextHopAddress |
InetAddress |
|
|
vRtrMplsTpLsrRPInLabel |
Unsigned32 |
|
|
vRtrMplsTpLsrRPOutLabel |
Unsigned32 |
|
|
vRtrMplsTpLsrRPOutLink |
InterfaceIndexOrZero |
|
|
vRtrMplsTpLsrRPNextHopAddrType |
InetAddressType |
|
|
vRtrMplsTpLsrRPNextHopAddress |
InetAddress |
|
|
vRtrMplsTpLsrFPEnabled |
TruthValue |
|
|
vRtrMplsTpLsrRPEnabled |
TruthValue |
|
VRtrMplsTpLsrPathIdEntry |
|
SEQUENCE |
|
|
|
|
vRtrMplsTpLsrPathIdSrcGlobalId |
TmnxMplsTpGlobalID |
|
|
vRtrMplsTpLsrPathIdSrcNodeId |
TmnxMplsTpNodeID |
|
|
vRtrMplsTpLsrPathIdSrcTunNum |
Unsigned32 |
|
|
vRtrMplsTpLsrPathIdDestGlobalId |
TmnxMplsTpGlobalID |
|
|
vRtrMplsTpLsrPathIdDestNodeId |
TmnxMplsTpNodeID |
|
|
vRtrMplsTpLsrPathIdDestTunNum |
Unsigned32 |
|
|
vRtrMplsTpLsrPathIdLspNumber |
Unsigned32 |
|
|
vRtrMplsTpLsrPathIdRowStatus |
RowStatus |
|
|
vRtrMplsTpLsrPathIdPathName |
TNamedItem |
|
VRtrMplsTpTunnelEntry |
|
SEQUENCE |
|
|
|
|
vRtrMplsTpTunnelNodeId |
TmnxMplsTpNodeID |
|
|
vRtrMplsTpTunnelGlobalId |
TmnxMplsTpGlobalID |
|
|
vRtrMplsTpTunnelPreference |
Unsigned32 |
|
|
vRtrMplsTpTunnelType |
TmnxMplsTpTunnelType |
|
|
vRtrMplsTpTunnelID |
TmnxTunnelID |
|
|
vRtrMplsTpTunnelNextHopAddrType |
InetAddressType |
|
|
vRtrMplsTpTunnelNextHopAddress |
InetAddress |
|
|
vRtrMplsTpTunnelMetric |
Unsigned32 |
|
|
vRtrMplsTpTunnelAge |
Integer32 |
|
Defined Values
timetraMplsTpMIBModule |
1.3.6.1.4.1.6527.1.1.3.83 |
This document is the SNMP MIB module to manage and provision the
MPLS Transport Profile (TP) components of the Alcatel-Lucent SROS.
Copyright (c) 2012-2013 Alcatel-Lucent. All rights reserved.
Reproduction of this document is authorized on the condition that
the foregoing copyright notice is included.
This SNMP MIB module (Specification) embodies Alcatel-Lucent's
proprietary intellectual property. Alcatel-Lucent retains
all title and ownership in the Specification, including any
revisions.
Alcatel-Lucent grants all interested parties a non-exclusive
license to use and distribute an unmodified copy of this
Specification in connection with management of Alcatel-Lucent
products, and without fee, provided this copyright notice and
license appear on all copies.
This Specification is supplied 'as is', and Alcatel-Lucent
makes no warranty, either express or implied, as to the use,
operation, condition, or performance of the Specification. |
MODULE-IDENTITY |
|
|
|
vRtrMplsTpSystemTableLastChanged |
1.3.6.1.4.1.6527.3.1.2.83.1.1 |
The value of vRtrMplsTpSystemTableLastChanged indicates the time, since
system startup, when the vRtrMplsTpSystemTable last changed state. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeStamp |
|
|
vRtrMplsTpSystemTable |
1.3.6.1.4.1.6527.3.1.2.83.2.1.1 |
The vRtrMplsTpSystemTable consists of the globally unique configuration
objects for MPLS-TP. These objects are typically required to be set
prior to configuring MPLS-TP LSP objects. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
VRtrMplsTpSystemEntry |
|
vRtrMplsTpSystemEntry |
1.3.6.1.4.1.6527.3.1.2.83.2.1.1.1 |
The vRtrMplsTpSystemEntry contains the globally unique configuration
objects for MPLS-TP. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
VRtrMplsTpSystemEntry |
|
|
vRtrMplsTpRowStatus |
1.3.6.1.4.1.6527.3.1.2.83.2.1.1.1.1 |
The value of vRtrMplsTpRowStatus specifies the row status of the
MPLS-TP system entry. A row must exist in this table for a specified
virtual router ID for MPLS-TP LSP configuration to be allowed. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
vRtrMplsTpGlobalId |
1.3.6.1.4.1.6527.3.1.2.83.2.1.1.1.2 |
The value of vRtrMplsTpGlobalId specifies the AS number of the node. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
TmnxMplsTpGlobalID |
|
|
vRtrMplsTpNodeId |
1.3.6.1.4.1.6527.3.1.2.83.2.1.1.1.3 |
The value of vRtrMplsTpNodeId specifies the unique node identifier for
the given global ID. If not specified, the MPLS Router ID of the node
is used. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
TmnxMplsTpNodeID |
|
|
vRtrMplsTpTunnelIdMin |
1.3.6.1.4.1.6527.3.1.2.83.2.1.1.1.4 |
The value of vRtrMplsTpTunnelIdMin specifies the start
range of tunnel ids reserved for MPLS-TP LSPs.
This variable must be set along with vRtrMplsTpTunnelIdMax
to indicate the range of tunnel ids reserved for MPLS-TP LSPs.
A value of 0 indicates that tunnel ids are not reserved for
MPLS-TP LSPs. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0 | 1..61440 |
|
vRtrMplsTpTunnelIdMax |
1.3.6.1.4.1.6527.3.1.2.83.2.1.1.1.5 |
The value of vRtrMplsTpTunnelIdMax specifies the end
range of tunnel ids reserved for MPLS-TP LSPs.
This variable must be set along with vRtrMplsTpTunnelIdMin
to indicate the range of tunnel ids reserved for MPLS-TP LSPs.
A value of 0 indicates that tunnel ids are not reserved for
MPLS-TP LSPs. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0 | 1..61440 |
|
vRtrMplsTpAdminState |
1.3.6.1.4.1.6527.3.1.2.83.2.1.1.1.6 |
The value of vRtrMplsTpAdminState specifies the desired
administrative state of MPLS-TP on this router. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
TmnxAdminState |
|
|
vRtrMplsTpInheritance |
1.3.6.1.4.1.6527.3.1.2.83.2.1.1.1.7 |
For each writable object in this row that can be configured to
inherit its value from the corresponding object in the
vRtrIpAddrTable, there is bit within vRtrMplsTpInheritance
that controls whether to inherit the operational value of the
object or use the administratively set value.
Non mask bits will always have value of zero.
This object is a bit-mask, with the following objects:
vRtrMplsTpNodeId 0x1
When the bit for an object is set to one, then the object's
administrative and operational value are inherited from the
corresponding object in vRtrIpAddrTable.
When the bit for an object is set to zero, then the object's
administrative and operational value are whatever the DEFVAL
or most recently SET value is. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
BITS |
vRtrMplsTpNodeId(0) |
|
vRtrMplsTpOamTemplTblLastChanged |
1.3.6.1.4.1.6527.3.1.2.83.1.2 |
The value of vRtrMplsTpOamTemplTblLastChanged indicates the last
time, since system startup, when the vRtrMplsTpOamTemplateCfgTable
last changed state. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeStamp |
|
|
vRtrMplsTpOamTemplateCfgTable |
1.3.6.1.4.1.6527.3.1.2.83.2.2.1 |
The vRtrMplsTpOamTemplateCfgTable maintains the MPLS-TP Templates used
by MPLS-TP OAM.
The template is specific to the OAM protocol and can be used to
configure MPLS-TP-OAM parameters such as BFD Tx/Rx timer intervals,
multiplier and any other relevant session/fault management parameters.
The OAM template is referenced in the MPLS-TP path configuration, so
different values are possible for the working and protect paths of a
tunnel. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
VRtrMplsTpOamTemplateCfgEntry |
|
vRtrMplsTpOamTemplateCfgEntry |
1.3.6.1.4.1.6527.3.1.2.83.2.2.1.1 |
The vRtrMplsTpOamTemplateCfgEntry contains the configuration items
maintained by the vRtrMplsTpOamTemplateCfgTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
VRtrMplsTpOamTemplateCfgEntry |
|
|
vRtrMplsTpOamTmplName |
1.3.6.1.4.1.6527.3.1.2.83.2.2.1.1.1 |
The value vRtrMplsTpOamTmplName specifies the unique name of the
MPLS-TP OAM Template. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
TNamedItem |
|
|
vRtrMplsTpOamTmplRowStatus |
1.3.6.1.4.1.6527.3.1.2.83.2.2.1.1.2 |
The value of vRtrMplsTpOamTmplRowStatus specifies the row status of the
MPLS-TP OAM Template entry.
Rows are created by setting this object to the value 'createAndGo (4)'
and are destroyed using the value 'destroy (6)'. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
vRtrMplsTpOamTmplLastChangedTime |
1.3.6.1.4.1.6527.3.1.2.83.2.2.1.1.3 |
The value vRtrMplsTpOamTmplLastChangedTime indicates the time, since
system startup, that an columnar object in this row changed state. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeStamp |
|
|
vRtrMplsTpOamTmplBfdTemplateName |
1.3.6.1.4.1.6527.3.1.2.83.2.2.1.1.4 |
The value of vRtrMplsTpOamTmplBfdTemplateName specifies the
TIMETRA-BFD-MIB::tmnxBfdAdminTemplateName used by the OAM template. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
TNamedItemOrEmpty |
|
|
vRtrMplsTpOamTmplHoldTimeDown |
1.3.6.1.4.1.6527.3.1.2.83.2.2.1.1.5 |
The value of vRtrMplsTpOamTmplHoldTimeDown specifies the time, in
centiseconds, used for the hold-timer for the BFD Continuity Check (CC)
session down event dampening. This guards against reporting excessive
operational state transitions.
This is implemented by not advertising subsequent transitions of the
BFD CC state until the configured timer has expired.
A value of zero (0) specifies that a down transition is reported
immediately. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..5000 |
|
vRtrMplsTpOamTmplHoldTimeUp |
1.3.6.1.4.1.6527.3.1.2.83.2.2.1.1.6 |
The value of vRtrMplsTpOamTmplHoldTimeUp specifies the time, in
deciseconds, used for the hold-timer for the BFD Continuity Check (CC)
session up event dampening. This guards against reporting excessive
operational state transitions.
This is implemented by not advertising subsequent transitions of the
BFD CC state until the configured timer has expired.
A value of zero (0) specifies that an up transition is reported
immediately. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..500 |
|
vRtrMplsTpPtcTemplTblLastChanged |
1.3.6.1.4.1.6527.3.1.2.83.1.3 |
The value of vRtrMplsTpPtcTemplTblLastChanged indicates the last time,
since system startup, when the vRtrMplsTpPtcTemplateCfgTable changed
state. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeStamp |
|
|
vRtrMplsTpPtcTemplateCfgTable |
1.3.6.1.4.1.6527.3.1.2.83.2.2.2 |
The vRtrMplsTpPtcTemplateCfgTable maintains the MPLS-TP Templates used
for MPLS LSP Protection. Entries in this table maintain the common
configuration elements used by the protected LSPs. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
VRtrMplsTpPtcTemplateCfgEntry |
|
vRtrMplsTpPtcTemplateCfgEntry |
1.3.6.1.4.1.6527.3.1.2.83.2.2.2.1 |
The vRtrMplsTpPtcTemplateCfgEntry contains the configuration items
maintained by the vRtrMplsTpPtcTemplateCfgTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
VRtrMplsTpPtcTemplateCfgEntry |
|
|
vRtrMplsTpPtcTmplName |
1.3.6.1.4.1.6527.3.1.2.83.2.2.2.1.1 |
The value of vRtrMplsTpPtcTmplName specifies the unique name of the
MPLS-TP Protection Template. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
TNamedItem |
|
|
vRtrMplsTpPtcTmplRowStatus |
1.3.6.1.4.1.6527.3.1.2.83.2.2.2.1.2 |
The value of vRtrMplsTpPtcTmplRowStatus specifies the row status of the
MPLS-TP Protection Template.
Rows are created by setting this object to the value 'createAndGo (4)'
and are destroyed by using the value 'destroy (6)'. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
vRtrMplsTpPtcTmplLastChangedTime |
1.3.6.1.4.1.6527.3.1.2.83.2.2.2.1.3 |
The value of vRtrMplsTpPtcTmplLastChangedTime indicates the time, since
system startup, that a columnar object in the MPLS-TP Protection
Template entry last changed state. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeStamp |
|
|
vRtrMplsTpPtcTmplProtectionMode |
1.3.6.1.4.1.6527.3.1.2.83.2.2.2.1.4 |
The value of vRtrMplsTpPtcTmplProtectionMode specifies the mode used
for determining which members are actively receiving and transmitting
data.
In the 'one2one (1)' (1:1) architecture, a protection transport path is
dedicated to the working transport path of a single service, and the
traffic is only transmitted on either the working or the protection
path, by using a selector at the source of the protection domain.
A selector at the sink of the protection domain then selects the path
that carries the normal traffic.
When the value is set to 'one2one (1)', only two members are allowed,
and only one of them can be active at one point in time. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
one2one(1) |
|
vRtrMplsTpPtcTmplProtectionDir |
1.3.6.1.4.1.6527.3.1.2.83.2.2.2.1.5 |
The value of vRtrMplsTpPtcTmplProtectionDir specifies the directional
mode of the Protection Template.
bidirectional - provides protection in both directions. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
bidirectional(2) |
|
vRtrMplsTpPtcTmplRevertive |
1.3.6.1.4.1.6527.3.1.2.83.2.2.2.1.6 |
The value of vRtrMplsTpPtcTmplRevertive specifies whether or not an
instance of this Template will operate in a 'revertive (2)' or
'nonRevertive (1)' mode. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
nonRevertive(1), revertive(2) |
|
vRtrMplsTpPtcTmplWaitToRestore |
1.3.6.1.4.1.6527.3.1.2.83.2.2.2.1.7 |
The value of vRtrMplsTpPtcTmplWaitToRestore specifies the
Wait-To-Restore (WTR) timer, in seconds, after a cleared failure the
working path must wait before reverting.
The WTR timer is used to prevent frequent operation of the protection
switching due to intermittent signal failure defects. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..720 |
|
vRtrMplsTpPtcTmplRapidPscTimer |
1.3.6.1.4.1.6527.3.1.2.83.2.2.2.1.8 |
The value of vRtrMplsTpPtcTmplRapidPscTimer specifies the time, in
milliseconds, for the Rapid Protection Switch Coordination (PSC) timer.
When the protection domain state is changed, three PSC messages are
transmitted as quickly as possible, to allow for rapid protection
switching. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
10 | 100 | 1000 |
|
vRtrMplsTpPtcTmplSlowPscTimer |
1.3.6.1.4.1.6527.3.1.2.83.2.2.2.1.9 |
The value of vRtrMplsTpPtcTmplSlowPscTimer specifies the time, in
seconds, for the Slow Protection Switch Coordination (PSC) timer used
to continually transmit the PSC message. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
5..60 |
|
vRtrMplsTpLspPathTblLastChanged |
1.3.6.1.4.1.6527.3.1.2.83.1.5 |
The value of vRtrMplsTpLspPathTblLastChanged indicates the last time,
since system startup, that the vRtrMplsTpLspPathTable changed state. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeStamp |
|
|
vRtrMplsTpLspPathTable |
1.3.6.1.4.1.6527.3.1.2.83.2.3.2 |
The vRtrMplsTpLspPathTable maintains the MPLS-TP configuration objects
associated with an MPLS LSP path. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
VRtrMplsTpLspPathEntry |
|
vRtrMplsTpLspPathEntry |
1.3.6.1.4.1.6527.3.1.2.83.2.3.2.1 |
The vRtrMplsTpLspPathEntry contains the configuration objects for the
MPLS-TP path table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
VRtrMplsTpLspPathEntry |
|
|
vRtrMplsTpLspPathIndex |
1.3.6.1.4.1.6527.3.1.2.83.2.3.2.1.1 |
The value of vRtrMplsTpLspPathIndex specifies the path index for the
MPLS-TP LSP path.
working (1) - A working path is the primary path for the LSP.
protecting (2) - A protection path is the secondary path for the
LSP. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
INTEGER |
working(1), protecting(2) |
|
vRtrMplsTpLspPathRowStatus |
1.3.6.1.4.1.6527.3.1.2.83.2.3.2.1.2 |
The value of vRtrMplsTpLspPathRowStatus specifies the row status of the
MPLS-TP LSP Path. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
vRtrMplsTpLspPathLastChangedTime |
1.3.6.1.4.1.6527.3.1.2.83.2.3.2.1.3 |
The value of vRtrMplsTpLspPathLastChangedTime indicates the last time,
since system startup, that a writable object in this table was
modified. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeStamp |
|
|
vRtrMplsTpLspPathAdminState |
1.3.6.1.4.1.6527.3.1.2.83.2.3.2.1.4 |
The value of vRtrMplsTpLspPathAdminState specifies the administrative
state of the MPLS-TP LSP Path. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
TmnxAdminState |
|
|
vRtrMplsTpLspPathOperState |
1.3.6.1.4.1.6527.3.1.2.83.2.3.2.1.5 |
The value of vRtrMplsTpLspPathOperState indicates the operational state
of the MPLS-TP LSP Path. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TmnxOperState |
|
|
vRtrMplsTpLspPathReasonDownFlags |
1.3.6.1.4.1.6527.3.1.2.83.2.3.2.1.6 |
The value of vRtrMplsTpLspPathReasonDownFlags specifies the reason why
the MPLS-TP LSP Path is operationally down when the administrative state
is 'inService (2)'.
The recognized BIT values are:
unknown (0) - Unspecified (or unknown)
ccFault (1) - BFD Continuity Check (CC) failed
cvFault (2) - BFD Connectivity Verification (CV) failed
ifDn (3) - The path out-link interface is
operationally down
portDn (4) - The port associated with the out-link
interface is operationally down
parentAdminDn (5) - The associated mpls-tp Lsp or mpls-tp
instance or mpls instance is admin down
mepAdminDn (6) - The path MEP is admin down
unsupportedPort (7) - MPLS-TP functionality is not supported
over the out-link port.
ifNhAddrInconsistent (8) - The configured next-hop address is not
bound to the configured out-link
interface.
ptcTmplMsng (9) - The protect-tp-path is missing a
protection-template name.
ccDnHold (10) - ccFault effect on path-state is on hold
due to 'hold-time-down' config in the
oam-template
ccUpHold (11) - ccFault clear effect on path-state is on
hold due to 'hold-time-up' config in the
oam-template
bfdNoRsrc (12) - bfd-enable failed since maximum number of supported
bfd-sessions was reached. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
BITS |
unknown(0), ccFault(1), cvFault(2), ifDn(3), portDn(4), parentAdminDn(5), mepAdminDn(6), unsupportedPort(7), ifNhAddrInconsistent(8), ptcTmplMsng(9), ccDnHold(10), ccUpHold(11), bfdNoRsrc(12) |
|
vRtrMplsTpLspPathLspNumber |
1.3.6.1.4.1.6527.3.1.2.83.2.3.2.1.7 |
The value of vRtrMplsTpLspPathLspNumber specifies the MPLS-TP LSP Path
number.
The default value of this object is dependent on the value of
vRtrMplsTpLspPathIndex. If this object refers to a 'working (1)' path,
then the default value is one (1). If this object refers to a
'protecting (2)' path, then the default value is two (2). |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
1..65535 |
|
vRtrMplsTpLspPathInLabel |
1.3.6.1.4.1.6527.3.1.2.83.2.3.2.1.8 |
The value of vRtrMplsTpLspPathInLabel specifies the LSP ingress Label
used by the MPLS-TP LSP Path.
Once this object is set, to remove the in-label, one must destroy and
recreate the vRtrMplsTpLspPathEntry. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
vRtrMplsTpLspPathOutLabel |
1.3.6.1.4.1.6527.3.1.2.83.2.3.2.1.9 |
The value of vRtrMplsTpLspPathOutLabel specifies the LSP egress Label
used by the MPLS-TP LSP Path.
Once this object is set, to remove the out-label, one must destroy and
recreate the vRtrMplsTpLspPathEntry. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0 | 16..1048575 |
|
vRtrMplsTpLspPathOutLink |
1.3.6.1.4.1.6527.3.1.2.83.2.3.2.1.10 |
The value of vRtrMplsTpLspPathOutLink specifies the LSP out-link
interface used by the MPLS-TP LSP Path.
Once this object is set, to remove the out-link, one must destroy and
recreate the vRtrMplsTpLspPathEntry. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
InterfaceIndexOrZero |
|
|
vRtrMplsTpLspPathNextHopAddrType |
1.3.6.1.4.1.6527.3.1.2.83.2.3.2.1.11 |
The value of vRtrMplsTpLspPathNextHopAddrType, along with
vRtrMplsTpLspPathNextHopAddress, specifies the IP address used as the
next hop for the MPLS-TP LSP Path.
Once this object is set, to remove the next hop, one must destroy and
recreate the vRtrMplsTpLspPathEntry.
This object is only applicable if the vRtrMplsTpLspPathOutLink
references a numbered interface. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
InetAddressType |
|
|
vRtrMplsTpLspPathNextHopAddress |
1.3.6.1.4.1.6527.3.1.2.83.2.3.2.1.12 |
The value of vRtrMplsTpLspPathNextHopAddress, along with
vRtrMplsTpLspPathNextHopAddrType, specifies the IP address used as the
next hop for the MPLS-TP LSP Path.
Once this object is set, to remove the next hop, one must destroy and
recreate the vRtrMplsTpLspPathEntry.
This object is only applicable if the vRtrMplsTpLspPathOutLink
references a numbered interface. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
InetAddress |
Size(0|4|16) |
|
vRtrMplsTpLspPathState |
1.3.6.1.4.1.6527.3.1.2.83.2.3.2.1.13 |
The value of vRtrMplsTpLspPathState indicates the current working state
of the MPLS-TP LSP Path. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
unknown(1), active(2), inactive(3) |
|
vRtrMplsTpLspPathTimeUp |
1.3.6.1.4.1.6527.3.1.2.83.2.3.2.1.14 |
The value of vRtrMplsTpLspPathTimeUp indicates the time that
this MPLS-TP LSP path has been operational. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeInterval |
|
|
vRtrMplsTpLspPathTimeDown |
1.3.6.1.4.1.6527.3.1.2.83.2.3.2.1.15 |
The value of vRtrMplsTpLspPathTimeDown indicates the time that
this MPLS-TP LSP Path has not been operational. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeInterval |
|
|
vRtrMplsTpLspPathActiveTimeUp |
1.3.6.1.4.1.6527.3.1.2.83.2.3.2.1.16 |
The value of vRtrMplsTpLspPathActiveTimeUp indicates the time that
this MPLS-TP LSP Path has been active. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeInterval |
|
|
vRtrMplsTpLspPathMepTblLastChg |
1.3.6.1.4.1.6527.3.1.2.83.1.6 |
The value of vRtrMplsTpLspPathMepTblLastChg indicates the last time,
since system startup, that the vRtrMplsTpLspPathMepTable changed
state. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeStamp |
|
|
vRtrMplsTpLspPathMepEntry |
1.3.6.1.4.1.6527.3.1.2.83.2.3.3.1 |
The vRtrMplsTpLspPathMepEntry represents a Maintenance Endpoint for a
MPLS-TP LSP Path. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
VRtrMplsTpLspPathMepEntry |
|
|
vRtrMplsTpLspPathMepLastChgTime |
1.3.6.1.4.1.6527.3.1.2.83.2.3.3.1.1 |
The value of vRtrMplsTpLspPathMepLastChgTime indicates the time, since
system startup, when a columnar object for the specified row last
changed state. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeStamp |
|
|
vRtrMplsTpLspPathMepRowStatus |
1.3.6.1.4.1.6527.3.1.2.83.2.3.3.1.2 |
The value of vRtrMplsTpLspPathMepRowStatus specifies the row status of
the vRtrMplsTpLspPathMepEntry. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
vRtrMplsTpLspPathMepAdminState |
1.3.6.1.4.1.6527.3.1.2.83.2.3.3.1.3 |
The value of vRtrMplsTpLspPathMepAdminState specifies the
administrative state of the MPLS-TP LSP path. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
TmnxAdminState |
|
|
vRtrMplsTpLspPathMepProtectTmpl |
1.3.6.1.4.1.6527.3.1.2.83.2.3.3.1.4 |
The value of vRtrMplsTpLspPathMepProtectTmpl specifies the associated
vRtrMplsTpPtcTemplateCfgEntry to this MPLS-TP LSP Path MEP.
This object is only meaningful to the row indexed with the
vRtrMplsTpLspPathIndex value of 'protecting'. Attempts to configure
this object, otherwise, will result in an 'inconsistentValue' error. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
TNamedItemOrEmpty |
|
|
vRtrMplsTpLspPathMepOamTmpl |
1.3.6.1.4.1.6527.3.1.2.83.2.3.3.1.5 |
The value of vRtrMplsTpLspPathMepOamTmpl specifies the associated
vRtrMplsTpOamTemplateCfgEntry to this MPLS-TP LSP Path MEP. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
TNamedItemOrEmpty |
|
|
vRtrMplsTpLspPathMepBfdEnabled |
1.3.6.1.4.1.6527.3.1.2.83.2.3.3.1.6 |
The value of vRtrMplsTpLspPathMepBfdEnabled specifies whether BFD is
enabled or not.
If set to 'disabled (0)', BFD is not enabled.
If set to 'cc (1)', BFD is enabled with Continuity Check (CC)
functionality.
If set to 'ccCv (2)', BFD is enabled with both CC and Connectivity
Verification (CV) functionality. In this
mode, BFD will detect mis-connectivity as
described in RFC 6428 Section 3.7.2.
Once enabled, a modification to this object will effect the BFD
session. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(0), cc(1), ccCv(2) |
|
vRtrMplsTpLspPathMepBfdOperState |
1.3.6.1.4.1.6527.3.1.2.83.2.3.3.1.7 |
The value of vRtrMplsTpLspPathMepBfdOperState indicates the operational
state of the BFD session.
The operational state of 'unknown (1)' indicates that the BFD session
is not enabled. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TmnxOperState |
|
|
vRtrMplsTpLspPtPathMepStatEntry |
1.3.6.1.4.1.6527.3.1.2.83.2.3.4.1 |
The vRtrMplsTpLspPathMepEntry represents a Maintenance Endpoint for a
MPLS-TP LSP protection Path.
Rows are created and destroyed by the system based on the configuration
of the MEP protection-type. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
VRtrMplsTpLspPtPathMepStatEntry |
|
|
vRtrMplsTpLspPtPathMepRxPdu |
1.3.6.1.4.1.6527.3.1.2.83.2.3.4.1.1 |
The value of vRtrMplsTpLspPtPathMepRxPdu indicates the last received
PSC PDU APS format. The value of this object compared to that of
vRtrMplsTpLspPtPathMepTxPdu will indicate a configuration mismatch
between the local and far-end node. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
VRtrMplsTpLspPathMepPduType |
|
|
vRtrMplsTpLspPtPathMepTxPdu |
1.3.6.1.4.1.6527.3.1.2.83.2.3.4.1.2 |
The value of vRtrMplsTpLspPtPathMepTxPdu indicates the last transmitted
PSC PDU APS format. The value of this object compared to that of
vRtrMplsTpLspPtPathMepRxPdu will indicate a configuration mismatch
between the local and far-end node. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
VRtrMplsTpLspPathMepPduType |
|
|
vRtrMplsTpLspPtPathMepDefects |
1.3.6.1.4.1.6527.3.1.2.83.2.3.4.1.3 |
The value of vRtrMplsTpLspPtPathMepDefects indicates the defect state
of the protection path MEP. The defects monitored by this object are as
follows:
- protectionTypeMismatch (0) - A protection-type mismatch is
detected.
- revertModeMismatch (1) - A revertive mode mismatch is
detected. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
BITS |
protectionTypeMismatch(0), revertModeMismatch(1) |
|
vRtrMplsTpLspPtPathMepWTRTimer |
1.3.6.1.4.1.6527.3.1.2.83.2.3.4.1.4 |
The value of vRtrMplsTpLspPtPathMepWTRTimer indicates the remaining
Wait-To-Restore time, in seconds, before the protection path can
switch back to the working path.
A value of zero (0) indicates that there is no WTR timer in effect. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
vRtrMplsTpTunnelCommandEntry |
1.3.6.1.4.1.6527.3.1.2.83.2.4.1.1 |
The vRtrMplsTpTunnelCommandEntry contains the command available to
execute on an existing MPLS-TP Tunnel.
Rows in this table are created and destroyed by the system. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
VRtrMplsTpTunnelCommandEntry |
|
|
vRtrMplsTpTunnelCommandSwitch |
1.3.6.1.4.1.6527.3.1.2.83.2.4.1.1.1 |
The value vRtrMplsTpTunnelCommandSwitch specifies the switch command to
initiate on a MPLS-TP LSP Tunnel.
When read, this object returns the last command written or 'noCmd (0)'
if no command has been written to this MPLS-TP LSP Tunnel since
initialization. The return of the last command written does not imply
that this command is currently in effect. This request may be preempted
by a higher priority local or remote request.
The value 'noCmd (0)' may not be used in a write command.
The value 'clear (1)' clears all the switch commands listed below for
the specified LSP.
The value of 'forceSwitch (2)' switches the active path to the
protection path.
The value of 'manualSwitch (3)' switches the active path to the
protection path.
The value of 'lockout (4)' prevents the working path from switching to
the protection path. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
noCmd(0), clear(1), forceSwitch(2), manualSwitch(3), lockout(4) |
|
vRtrMplsTpLsrTblLastChanged |
1.3.6.1.4.1.6527.3.1.2.83.1.7 |
The value of vRtrMplsTpLsrTblLastChanged indicates the last time,
since system startup, when the vRtrMplsTpLsrCfgTable changed state. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeStamp |
|
|
vRtrMplsTpLsrCfgTable |
1.3.6.1.4.1.6527.3.1.2.83.2.5.1 |
The vRtrMplsTpLsrCfgTable maintains the MPLS-TP LSR
configuration information. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
VRtrMplsTpLsrCfgEntry |
|
vRtrMplsTpLsrCfgEntry |
1.3.6.1.4.1.6527.3.1.2.83.2.5.1.1 |
The vRtrMplsTpLsrCfgEntry contains the configuration items
maintained by the vRtrMplsTpLsrCfgTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
VRtrMplsTpLsrCfgEntry |
|
|
vRtrMplsTpLsrPathName |
1.3.6.1.4.1.6527.3.1.2.83.2.5.1.1.1 |
The value of vRtrMplsTpLsrPathName specifies the unique name of the
MPLS-TP LSR Path. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
TNamedItem |
|
|
vRtrMplsTpLsrRowStatus |
1.3.6.1.4.1.6527.3.1.2.83.2.5.1.1.2 |
The value of vRtrMplsTpLsrRowStatus specifies the row status of the
MPLS-TP LSR configuration entry.
Rows are created by setting this object to the value 'createAndGo (4)'
and are destroyed by using the value 'destroy (6)'. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
vRtrMplsTpLsrLastChangedTime |
1.3.6.1.4.1.6527.3.1.2.83.2.5.1.1.3 |
The value of vRtrMplsTpLsrLastChangedTime indicates the time, since
system startup, that a columnar object in the MPLS-TP LSR entry last
changed state. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeStamp |
|
|
vRtrMplsTpLsrAdminState |
1.3.6.1.4.1.6527.3.1.2.83.2.5.1.1.4 |
The value of vRtrMplsTpLsrAdminState specifies the administrative state
of the MPLS-TP LSR. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
TmnxAdminState |
|
|
vRtrMplsTpLsrOperState |
1.3.6.1.4.1.6527.3.1.2.83.2.5.1.1.5 |
The value of vRtrMplsTpLsrOperState indicates the operational state of
the MPLS-TP LSR. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TmnxOperState |
|
|
vRtrMplsTpLsrFPInLabel |
1.3.6.1.4.1.6527.3.1.2.83.2.5.1.1.6 |
The value of vRtrMplsTpLsrFPInLabel specifies the forward path (FP)
ingress label used by the MPLS-TP LSR Path.
This object can be set only after vRtrMplsTpLsrFPEnabled is set to
'true'.
Once this object is set, the value may not be unset. To remove the
ingress label one must set vRtrMplsTpLsrFPEnabled to 'false'. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
vRtrMplsTpLsrFPOutLabel |
1.3.6.1.4.1.6527.3.1.2.83.2.5.1.1.7 |
The value of vRtrMplsTpLsrFPOutLabel specifies the forward path (FP)
egress label used by the MPLS-TP LSR Path.
This object can be set only after vRtrMplsTpLsrFPEnabled is set to
'true'.
Once this object is set, the value may not be unset. To remove the
egress label one must set vRtrMplsTpLsrFPEnabled to 'false'. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0 | 16..1048575 |
|
vRtrMplsTpLsrFPOutLink |
1.3.6.1.4.1.6527.3.1.2.83.2.5.1.1.8 |
The value of vRtrMplsTpLsrFPOutLink specifies the forward path (FP)
out-link interface used by the MPLS-TP LSR Path.
This object can be set only after vRtrMplsTpLsrFPEnabled is set to
'true'.
Once this object is set, the value may not be unset. To remove the
out-link, one must set vRtrMplsTpLsrFPEnabled to 'false'. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
InterfaceIndexOrZero |
|
|
vRtrMplsTpLsrFPNextHopAddrType |
1.3.6.1.4.1.6527.3.1.2.83.2.5.1.1.9 |
The value of vRtrMplsTpLsrFPNextHopAddrType, along with
vRtrMplsTpLsrFPNextHopAddress, specifies the forward path (FP)
IP address used as the next hop for the MPLS-TP LSP Path.
This object can be set only after vRtrMplsTpLsrFPEnabled is set to
'true'.
Once this object is set, the value may not be unset. To remove the
next hop, one must set vRtrMplsTpLsrFPEnabled to 'false'.
This object is only applicable if the vRtrMplsTpLsrFPOutLink
references a numbered interface. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
InetAddressType |
|
|
vRtrMplsTpLsrFPNextHopAddress |
1.3.6.1.4.1.6527.3.1.2.83.2.5.1.1.10 |
The value of vRtrMplsTpLsrFPNextHopAddress, along with
vRtrMplsTpLsrFPNextHopAddrType, specifies the forward path (FP)
IP address used as the next hop for the MPLS-TP LSR Path.
This object can be set only after vRtrMplsTpLsrFPEnabled is set to
'true'.
Once this object is set, the value may not be unset. To remove the next
hop, one must set vRtrMplsTpLsrFPEnabled to 'false'.
This object is only applicable if the vRtrMplsTpLsrFPOutLink references
a numbered interface. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
InetAddress |
Size(0|4|16) |
|
vRtrMplsTpLsrRPInLabel |
1.3.6.1.4.1.6527.3.1.2.83.2.5.1.1.11 |
The value of vRtrMplsTpLsrRPInLabel specifies the reverse path (RP)
LSP ingress label used by the MPLS-TP LSR Path.
This object can be set only after vRtrMplsTpLsrRPEnabled is set to
'true'.
Once this object is set, the value may not be unset. To remove the
ingress label, one must set vRtrMplsTpLsrRPEnabled to 'false'. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
vRtrMplsTpLsrRPOutLabel |
1.3.6.1.4.1.6527.3.1.2.83.2.5.1.1.12 |
The value of vRtrMplsTpLsrRPOutLabel specifies the reverse path (RP)
LSP egress label used by the MPLS-TP LSR Path.
This object can be set only after vRtrMplsTpLsrRPEnabled is set to
'true'.
Once this object is set, this value may not be unset. To remove the
egress label, one must set vRtrMplsTpLsrFPEnabled to 'false'. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0 | 16..1048575 |
|
vRtrMplsTpLsrRPOutLink |
1.3.6.1.4.1.6527.3.1.2.83.2.5.1.1.13 |
The value of vRtrMplsTpLsrRPOutLink specifies the reverse path (RP)
LSP out-link interface used by the MPLS-TP LSP Path.
This object can be set only after vRtrMplsTpLsrRPEnabled is set to
'true'.
Once this object is set, this value may not be unset. To remove the
out-link, one must set vRtrMplsTpLsrRPEnabled to 'false'. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
InterfaceIndexOrZero |
|
|
vRtrMplsTpLsrRPNextHopAddrType |
1.3.6.1.4.1.6527.3.1.2.83.2.5.1.1.14 |
The value of vRtrMplsTpLsrRPNextHopAddrType, along with
vRtrMplsTpLsrRPNextHopAddress, specifies the reverse path (RP)
IP address used as the next hop for the MPLS-TP LSP Path.
This object can be set only after vRtrMplsTpLsrRPEnabled is set to
'true'.
Once this object is set, this value may not be unset. To remove the
next hop, one must set vRtrMplsTpLsrRPEnabled to 'false'.
This object is only applicable if the vRtrMplsTpLsrRPOutLink
references a numbered interface. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
InetAddressType |
|
|
vRtrMplsTpLsrRPNextHopAddress |
1.3.6.1.4.1.6527.3.1.2.83.2.5.1.1.15 |
The value of vRtrMplsTpLsrRPNextHopAddress, along with
vRtrMplsTpLsrRPNextHopAddrType, specifies the reverse path (RP)
IP address used as the next hop for the MPLS-TP LSR Path.
This object can be set only after vRtrMplsTpLsrRPEnabled is set to
'true'.
Once this object is set, this value may not be unset. To remove the
next hop, one must set vRtrMplsTpLsrRPEnabled to 'false'.
This object is only applicable if the vRtrMplsTpLsrRPOutLink references
a numbered interface. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
InetAddress |
Size(0|4|16) |
|
vRtrMplsTpLsrFPEnabled |
1.3.6.1.4.1.6527.3.1.2.83.2.5.1.1.16 |
The value of vRtrMplsTpLsrFPEnabled specifies whether the forward
path is configured for the LSR path. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
vRtrMplsTpLsrRPEnabled |
1.3.6.1.4.1.6527.3.1.2.83.2.5.1.1.17 |
The value of vRtrMplsTpLsrRPEnabled specifies whether the reverse
path is configured for the LSR path. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
vRtrMplsTpLsrPathIdTblLastChg |
1.3.6.1.4.1.6527.3.1.2.83.1.8 |
The value of vRtrMplsTpLsrPathIdTblLastChg indicates the last time,
since system startup, when the vRtrMplsTpLsrPathIdTable changed state. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeStamp |
|
|
vRtrMplsTpLsrPathIdEntry |
1.3.6.1.4.1.6527.3.1.2.83.2.5.3.1 |
The vRtrMplsTpLsrPathIdEntry contains the configuration items
maintained by the vRtrMplsTpLsrPathIdTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
VRtrMplsTpLsrPathIdEntry |
|
|
vRtrMplsTpLsrPathIdSrcGlobalId |
1.3.6.1.4.1.6527.3.1.2.83.2.5.3.1.1 |
The value of vRtrMplsTpLsrPathIdSrcGlobalId specifies the unique node
identifier for the given source global ID. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
TmnxMplsTpGlobalID |
|
|
vRtrMplsTpLsrPathIdSrcNodeId |
1.3.6.1.4.1.6527.3.1.2.83.2.5.3.1.2 |
The value of vRtrMplsTpLsrPathIdSrcNodeId specifies the unique node
identifier for the given source node ID. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
TmnxMplsTpNodeID |
|
|
vRtrMplsTpLsrPathIdSrcTunNum |
1.3.6.1.4.1.6527.3.1.2.83.2.5.3.1.3 |
The value of vRtrMplsTpLsrPathIdSrcTunNum specifies the source tunnel
number of an MPLS-TP Static LSP. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0 | 1..61440 |
|
vRtrMplsTpLsrPathIdDestGlobalId |
1.3.6.1.4.1.6527.3.1.2.83.2.5.3.1.4 |
The value of vRtrMplsTpLsrPathIdDestGlobalId specifies the unique node
identifier for the given remote global ID. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
TmnxMplsTpGlobalID |
|
|
vRtrMplsTpLsrPathIdDestNodeId |
1.3.6.1.4.1.6527.3.1.2.83.2.5.3.1.5 |
The value of vRtrMplsTpLsrPathIdDestNodeId specifies the unique node
identifier for the given remote node ID. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
TmnxMplsTpNodeID |
|
|
vRtrMplsTpLsrPathIdDestTunNum |
1.3.6.1.4.1.6527.3.1.2.83.2.5.3.1.6 |
The value of vRtrMplsTpLsrPathIdDestTunNum specifies the destination
tunnel number of an MPLS-TP Static LSP. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0 | 1..61440 |
|
vRtrMplsTpLsrPathIdLspNumber |
1.3.6.1.4.1.6527.3.1.2.83.2.5.3.1.7 |
The value of vRtrMplsTpLsrPathIdLspNumber specifies the MPLS-TP LSP
Path number. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
1..65535 |
|
vRtrMplsTpLsrPathIdRowStatus |
1.3.6.1.4.1.6527.3.1.2.83.2.5.3.1.8 |
The value of vRtrMplsTpLsrPathIdRowStatus specifies the row status of
the MPLS-TP LSR Path.
Rows are created by setting this object to the value 'createAndGo (4)'
and are destroyed by using the value 'destroy (6)'. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
vRtrMplsTpLsrPathIdPathName |
1.3.6.1.4.1.6527.3.1.2.83.2.5.3.1.9 |
The value of vRtrMplsTpLsrPathIdPathName specifies the unique name of
the MPLS-TP LSR Path.
This object MUST be specified on row-creation, and must reference an
existing vRtrMplsTpLsrPathName. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
TNamedItem |
|
|
vRtrMplsTpTunnelTable |
1.3.6.1.4.1.6527.3.1.2.83.3.1.1 |
vRtrMplsTpTunnelTable maintains a list of MPLS-TP tunnels for the
specific router instance. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
VRtrMplsTpTunnelEntry |
|
vRtrMplsTpTunnelEntry |
1.3.6.1.4.1.6527.3.1.2.83.3.1.1.1 |
vRtrMplsTpTunnelEntry defines a tunnel to a particular destination in a
specific router context. A tunnel to a specific destination is an
MPLS-TP Static LSP. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
VRtrMplsTpTunnelEntry |
|
|
vRtrMplsTpTunnelNodeId |
1.3.6.1.4.1.6527.3.1.2.83.3.1.1.1.1 |
vRtrMplsTpTunnelNodeId indicates the destination node id of this
tunnel. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
TmnxMplsTpNodeID |
|
|
vRtrMplsTpTunnelPreference |
1.3.6.1.4.1.6527.3.1.2.83.3.1.1.1.3 |
The value of vRtrMplsTpTunnelPreference determines the priority of this
tunnel versus the other tunnels from different sources.
This is an absolute number used internally by the system to specify
preferences for the tunnel.
The lowest number signifies the most preferred entry in the table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
1..255 |
|
vRtrMplsTpTunnelType |
1.3.6.1.4.1.6527.3.1.2.83.3.1.1.1.4 |
The value of vRtrMplsTpTunnelType indicates the type of this tunnel
entity. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
TmnxMplsTpTunnelType |
|
|
vRtrMplsTpTunnelID |
1.3.6.1.4.1.6527.3.1.2.83.3.1.1.1.5 |
The value of vRtrMplsTpTunnelID provides an additional index to
distinguish between multiple tunnels to same destination having
same characteristics.
There could be multiple tunnels for the type 'mplsTpStatic'.
In such cases the vRtrMplsTpTunnelID will hold the specific
MPLS-TP Static LSP Id. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
TmnxTunnelID |
|
|
vRtrMplsTpTunnelNextHopAddrType |
1.3.6.1.4.1.6527.3.1.2.83.3.1.1.1.6 |
The value of vRtrMplsTpTunnelNextHopAddrType specifies the address type
of vRtrMplsTpTunnelNextHopAddress. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
InetAddressType |
|
|
vRtrMplsTpTunnelNextHopAddress |
1.3.6.1.4.1.6527.3.1.2.83.3.1.1.1.7 |
The value of vRtrMplsTpTunnelNextHopAddress specifies the ip address
of the next hop for the MPLS-TP tunnel and it depends on the value
of vRtrMplsTpTunnelNextHopAddrType. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
InetAddress |
Size(0|4|16|20) |
|
vRtrMplsTpTunnelMetric |
1.3.6.1.4.1.6527.3.1.2.83.3.1.1.1.8 |
The value of vRtrMplsTpTunnelMetric indicates the metric of the tunnel.
This is used in addition to the preference for this tunnel. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
vRtrMplsTpTunnelAge |
1.3.6.1.4.1.6527.3.1.2.83.3.1.1.1.9 |
The value of vRtrMplsTpTunnelAge indicates the number of seconds since
this tunnel entry was last updated or otherwise determined to be
correct. No semantics of 'too old' can be implied except through
knowledge of owner of the tunnel. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
vRtrMplsTpLspOldPathIndex |
1.3.6.1.4.1.6527.3.1.2.83.10.1 |
The value of vRtrMplsTpLspOldPathIndex indicates the path index of
of the old MPLS-TP path. |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
INTEGER |
working(1), protecting(2) |
|
vRtrMplsTpLspRevertMismatchAlarm |
1.3.6.1.4.1.6527.3.1.3.83.0.1 |
The vRtrMplsTpLspRevertMismatchAlarm is generated when an MPLS-TP LSP
revertive mode mismatch is detected on the protection MEP, at the APS
layer, by comparing the R bit of the transmitted and received APS
protocol. |
Status: current |
Access: accessible-for-notify |
NOTIFICATION-TYPE |
|
|
|
vRtrMplsTpLspRevertMismatchClear |
1.3.6.1.4.1.6527.3.1.3.83.0.2 |
The vRtrMplsTpLspRevertMismatchClear is generated when an MPLS-TP LSP
revertive mode mismatch is cleared. |
Status: current |
Access: accessible-for-notify |
NOTIFICATION-TYPE |
|
|
|
vRtrMplsTpLspPtTypeMismatchAlarm |
1.3.6.1.4.1.6527.3.1.3.83.0.3 |
The vRtrMplsTpLspPtTypeMismatchAlarm is generated when an MPLS-TP LSP
protection type mismatch is detected on the protection MEP, at the APS
layer, by comparing the PT bits of the transmitted and received APS
protocol. |
Status: current |
Access: accessible-for-notify |
NOTIFICATION-TYPE |
|
|
|
vRtrMplsTpLspPtTypeMismatchClear |
1.3.6.1.4.1.6527.3.1.3.83.0.4 |
The vRtrMplsTpLspPtTypeMismatchClear is generated when an MPLS-TP LSP
protection type mismatch is cleared. |
Status: current |
Access: accessible-for-notify |
NOTIFICATION-TYPE |
|
|
|
vRtrMplsTpLspActivePathUp |
1.3.6.1.4.1.6527.3.1.3.83.0.5 |
[CAUSE] The vRtrMplsTpLspActivePathUp notification is generated
when a MPLS-TP LSP Path comes up.
[EFFECT] The TP-Path is the active path in the tunnel that is
used to transport user traffic.
[RECOVERY] There is no recovery required for this notification. |
Status: current |
Access: accessible-for-notify |
NOTIFICATION-TYPE |
|
|
|
vRtrMplsTpLspActivePathChange |
1.3.6.1.4.1.6527.3.1.3.83.0.6 |
[CAUSE] The vRtrMplsTpLspActivePathChange notification is generated
when a MPLS-TP LSP Path changes its path from working to protecting or
visa versa. The old path is specified by vRtrMplsTpLspOldPathIndex.
[EFFECT] The TP Path after the switch will be used to transport user
traffic.
[RECOVERY] There is no recovery required for this notification. |
Status: current |
Access: accessible-for-notify |
NOTIFICATION-TYPE |
|
|
|
vRtrMplsTpCompliance |
1.3.6.1.4.1.6527.3.1.1.83.1.1 |
The compliance statement for the management of the MPLS-TP feature for
release 11.0 on SROS series systems. |
Status: current |
Access: accessible-for-notify |
MODULE-COMPLIANCE |
|
|
|
vRtrMplsTpTimeStampGroup |
1.3.6.1.4.1.6527.3.1.1.83.2.1.1 |
The group of objects maintaining table statistics for MPLS-TP on the
SROS series system. |
Status: current |
Access: accessible-for-notify |
OBJECT-GROUP |
|
|
|
vRtrMplsTpSystemGroup |
1.3.6.1.4.1.6527.3.1.1.83.2.1.2 |
The group of objects maintaining system configuration for MPLS-TP on
the SROS series systems. |
Status: current |
Access: accessible-for-notify |
OBJECT-GROUP |
|
|
|
vRtrMplsTpOamTemplateGroup |
1.3.6.1.4.1.6527.3.1.1.83.2.1.3 |
The group of objects maintaining the OAM template configuration for
MPLS-TP on the SROS series systems. |
Status: current |
Access: accessible-for-notify |
OBJECT-GROUP |
|
|
|
vRtrMplsTpProtectionTemplGroup |
1.3.6.1.4.1.6527.3.1.1.83.2.1.4 |
The group of objects maintaining the Protection template configuration
for MPLS-TP on the SROS series systems. |
Status: current |
Access: accessible-for-notify |
OBJECT-GROUP |
|
|
|
vRtrMplsTpLspPathGroup |
1.3.6.1.4.1.6527.3.1.1.83.2.1.5 |
The group of objects maintaining the LSP Path configuration for MPLS-TP
on the SROS series systems. |
Status: current |
Access: accessible-for-notify |
OBJECT-GROUP |
|
|
|
vRtrMplsTpLspPathMepGroup |
1.3.6.1.4.1.6527.3.1.1.83.2.1.6 |
The group of objects maintaining the LSP Path MEP configuration for
MPLS-TP on the SROS series systems. |
Status: current |
Access: accessible-for-notify |
OBJECT-GROUP |
|
|
|
vRtrMplsTpTunnelCommandGroup |
1.3.6.1.4.1.6527.3.1.1.83.2.1.7 |
The group of objects supporting manual protection operations for
MPLS-TP Tunnels on the SROS series systems. |
Status: current |
Access: accessible-for-notify |
OBJECT-GROUP |
|
|
|
vRtrMplsTpTunnelTableGroup |
1.3.6.1.4.1.6527.3.1.1.83.2.1.8 |
The group of objects supporting manual protection operations for
MPLS-TP Tunnels on the SROS series systems. |
Status: current |
Access: accessible-for-notify |
OBJECT-GROUP |
|
|
|
vRtrMplsTpLsrCfgGroup |
1.3.6.1.4.1.6527.3.1.1.83.2.1.9 |
The group of objects maintaining the LSR configuration for MPLS-TP
on the SROS series systems. |
Status: current |
Access: accessible-for-notify |
OBJECT-GROUP |
|
|
|
vRtrMplsTpLsrPathIdGroup |
1.3.6.1.4.1.6527.3.1.1.83.2.1.10 |
The group of objects maintaining the LSR Path configuration for MPLS-TP
on the SROS series systems. |
Status: current |
Access: accessible-for-notify |
OBJECT-GROUP |
|
|
|
vRtrMplsTpNotificationGroup |
1.3.6.1.4.1.6527.3.1.1.83.2.1.11 |
The group of notifications reporting MPLS-TP state changes on the SROS
series systems. |
Status: current |
Access: accessible-for-notify |
NOTIFICATION-GROUP |
|
|
|
vRtrMplsTpNotifyObjsGroup |
1.3.6.1.4.1.6527.3.1.1.83.2.1.12 |
The group of notification objects supporting MPLS TP notifications on
Alcatel-Lucent SROS series systems 11.0 release. |
Status: current |
Access: accessible-for-notify |
OBJECT-GROUP |
|
|
|