TIMETRA-DYNAMIC-SERVICES-MIB

File: TIMETRA-DYNAMIC-SERVICES-MIB.mib (81828 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
INET-ADDRESS-MIB TIMETRA-GLOBAL-MIB TIMETRA-TC-MIB
TIMETRA-SAP-MIB TIMETRA-SERV-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Unsigned32 Counter32 TEXTUAL-CONVENTION
RowStatus TimeStamp DateAndTime
DisplayString TruthValue RowPointer
MacAddress NOTIFICATION-GROUP OBJECT-GROUP
MODULE-COMPLIANCE InetAddressType InetAddress
timetraSRMIBModules tmnxSRObjs tmnxSRConfs
tmnxSRNotifyPrefix TNamedItem TNamedItemOrEmpty
TItemDescription TmnxServId TmnxSubAcctSessionId
TmnxEnabledDisabled TmnxPortID TmnxEncapVal
TmnxAuthPassword TmnxAdminState sapPortId
sapEncapValue svcId

Defined Types

TmnxDynSrvAcctStatsType  
The TmnxDynSrvAcctStatsType data type is an enumerated integer that describes the values used to identify the type of accounting statistics gathered.
TEXTUAL-CONVENTION    
  INTEGER volumeTime(1), time(2)  

TmnxDynSvcPlcyEntry  
SEQUENCE    
  tmnxDynSvcPlcyName TNamedItem
  tmnxDynSvcPlcyRowStatus RowStatus
  tmnxDynSvcPlcyLastCh TimeStamp
  tmnxDynSvcPlcyDescription TItemDescription
  tmnxDynSvcPlcyScriptPlcy TNamedItemOrEmpty
  tmnxDynSvcPlcyCliUser TNamedItemOrEmpty
  tmnxDynSvcPlcySapLimit Unsigned32

TmnxDynSvcPlcyApEntry  
SEQUENCE    
  tmnxDynSvcPlcyApIndex Unsigned32
  tmnxDynSvcPlcyApLastCh TimeStamp
  tmnxDynSvcPlcyApName TNamedItemOrEmpty
  tmnxDynSvcPlcyApStatsType TmnxDynSrvAcctStatsType
  tmnxDynSvcPlcyApUpdateInterval Unsigned32
  tmnxDynSvcPlcyApUpdateIvlJitter INTEGER

TmnxDynSvcSapEntry  
SEQUENCE    
  tmnxDynSvcSapAcctSessionId TmnxSubAcctSessionId
  tmnxDynSvcSapAcctSessionIdCtrl TmnxSubAcctSessionId
  tmnxDynSvcSapPolicy TNamedItemOrEmpty
  tmnxDynSvcSapScriptsExecuted Counter32
  tmnxDynSvcSapScriptsSuccess Counter32
  tmnxDynSvcSapLastScriptAction INTEGER
  tmnxDynSvcSapLastScriptTime DateAndTime
  tmnxDynSvcSapOrphaned TruthValue
  tmnxDynSvcSapService TmnxServId
  tmnxDynSvcSapLastScriptParams OCTET STRING

TmnxDynSvcSapAcctEntry  
SEQUENCE    
  tmnxDynSvcSapAcctIndex Unsigned32
  tmnxDynSvcSapAcctAcctStatus TmnxEnabledDisabled
  tmnxDynSvcSapAcctStatsType TmnxDynSrvAcctStatsType
  tmnxDynSvcSapAcctAcctInterval Unsigned32

TmnxDynSvcRootObjEntry  
SEQUENCE    
  tmnxDynSvcRootObjIndex Unsigned32
  tmnxDynSvcRootObjInstance RowPointer
  tmnxDynSvcRootObjOrphanTime TimeStamp
  tmnxDynSvcRootObjSnippetName DisplayString
  tmnxDynSvcRootObjSnippetInstance DisplayString

TmnxDynSvcStatsEntry  
SEQUENCE    
  tmnxDynSvcStatsId Unsigned32
  tmnxDynSvcStatsDescr TItemDescription
  tmnxDynSvcStatsVal Counter32

TmnxDynSvcSnippetEntry  
SEQUENCE    
  tmnxDynSvcSnippetName DisplayString
  tmnxDynSvcSnippetInstance DisplayString
  tmnxDynSvcSnippetRefCount Counter32
  tmnxDynSvcSnippetDictLength Unsigned32

TmnxDynSvcSnippetRootObjEntry  
SEQUENCE    
  tmnxDynSvcSnippetRootObjIdx Unsigned32
  tmnxDynSvcSnippetRootObjOid RowPointer

TmnxDynSvcSnippetRefEntry  
SEQUENCE    
  tmnxDynSvcSnippetRefIdx Unsigned32
  tmnxDynSvcSnippetRefSnipName DisplayString
  tmnxDynSvcSnippetRefSnipInst DisplayString

TmnxDynSvcSnippetResIdEntry  
SEQUENCE    
  tmnxDynSvcSnippetResIdIdx Unsigned32
  tmnxDynSvcSnippetResIdType DisplayString
  tmnxDynSvcSnippetResIdValue DisplayString

TmnxDynSvcPlcyAuthEntry  
SEQUENCE    
  tmnxDynSvcPlcyAuthLastCh TimeStamp
  tmnxDynSvcPlcyAuthRadiusSrvPlcy TNamedItemOrEmpty
  tmnxDynSvcPlcyAuthPassword TmnxAuthPassword
  tmnxDynSvcPlcyAuthLocalDb TNamedItemOrEmpty

TmnxDynSvcCaptureSapEntry  
SEQUENCE    
  tmnxDynSvcCaptureSapLastCh TimeStamp
  tmnxDynSvcCaptureSapAdminState TmnxAdminState
  tmnxDynSvcCaptureSapPolicy TNamedItemOrEmpty

TmnxDynSvcCaptureSapStatsEntry  
SEQUENCE    
  tmnxDynSvcCSapStatsRxPackets Counter32

TmnxDynSvcCaptureSapDropEntry  
SEQUENCE    
  tmnxDynSvcCSapDropIndex Unsigned32
  tmnxDynSvcCSapDropReason DisplayString
  tmnxDynSvcCSapDropCounter Counter32

TmnxDynSvcDataTriggerEntry  
SEQUENCE    
  tmnxDynSvcDTriggerAcctSessionId TmnxSubAcctSessionId
  tmnxDynSvcDTriggerMacAddress MacAddress
  tmnxDynSvcDTriggerIpAddressType InetAddressType
  tmnxDynSvcDTriggerIpAddress InetAddress
  tmnxDynSvcDTriggerState INTEGER

TmnxDynSvcLocalAuthDbEntry  
SEQUENCE    
  tmnxDynSvcLocAuthDbName TNamedItem
  tmnxDynSvcLocAuthDbRowStatus RowStatus
  tmnxDynSvcLocAuthDbLastCh TimeStamp
  tmnxDynSvcLocAuthDbAdminState TmnxAdminState
  tmnxDynSvcLocAuthDbDescription TItemDescription

TmnxDynSvcLocalAuthDbUserEntry  
SEQUENCE    
  tmnxDynSvcLocADbUsrName DisplayString
  tmnxDynSvcLocADbUsrRowStatus RowStatus
  tmnxDynSvcLocADbUsrLastCh TimeStamp
  tmnxDynSvcLocADbUsrAdminState TmnxAdminState
  tmnxDynSvcLocADbUsrDescription TItemDescription

TmnxDynSvcLocalAuthDbSapEntry  
SEQUENCE    
  tmnxDynSvcLocADbSapIndex Unsigned32
  tmnxDynSvcLocADbSapRowStatus RowStatus
  tmnxDynSvcLocADbSapLastCh TimeStamp
  tmnxDynSvcLocADbSapSapId DisplayString
  tmnxDynSvcLocADbSapPolicy TNamedItemOrEmpty
  tmnxDynSvcLocADbSapScriptParams1 DisplayString
  tmnxDynSvcLocADbSapScriptParams2 DisplayString
  tmnxDynSvcLocADbSapScriptParams3 DisplayString
  tmnxDynSvcLocADbSapScriptParams4 DisplayString

TmnxDynSvcLocalAuthDbAcctEntry  
SEQUENCE    
  tmnxDynSvcLocADbAcctIndex Unsigned32
  tmnxDynSvcLocADbAcctRowStatus RowStatus
  tmnxDynSvcLocADbAcctLastCh TimeStamp
  tmnxDynSvcLocADbAcctStatsType INTEGER
  tmnxDynSvcLocADbAcctUpdateIvl Unsigned32

Defined Values

timetraDynSrvMIBModule 1.3.6.1.4.1.6527.1.1.3.84
This document is the SNMP MIB module to manage and provision Dynamic Services for the Nokia 7xxx device. Copyright 2012-2016 Nokia. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Nokia's proprietary intellectual property. Nokia retains all title and ownership in the Specification, including any revisions. Nokia grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Nokia products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Nokia makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
MODULE-IDENTITY    

tmnxDynSvc 1.3.6.1.4.1.6527.3.1.2.84
OBJECT IDENTIFIER    

tmnxDynSvcObjs 1.3.6.1.4.1.6527.3.1.2.84.1
OBJECT IDENTIFIER    

tmnxDynSvcNotificationObjs 1.3.6.1.4.1.6527.3.1.2.84.2
OBJECT IDENTIFIER    

tmnxDynSvcConformance 1.3.6.1.4.1.6527.3.1.1.84
OBJECT IDENTIFIER    

tmnxDynSvcCompliances 1.3.6.1.4.1.6527.3.1.1.84.1
OBJECT IDENTIFIER    

tmnxDynSvcGroups 1.3.6.1.4.1.6527.3.1.1.84.2
OBJECT IDENTIFIER    

tmnxDynSvcNotifyPrefix 1.3.6.1.4.1.6527.3.1.3.84
OBJECT IDENTIFIER    

tmnxDynSvcNotifications 1.3.6.1.4.1.6527.3.1.3.84.0
OBJECT IDENTIFIER    

tmnxDynSvcPlcyTable 1.3.6.1.4.1.6527.3.1.2.84.1.1
The tmnxDynSvcPlcyTable allows configuration of policies for Dynamic Services.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxDynSvcPlcyEntry

tmnxDynSvcPlcyEntry 1.3.6.1.4.1.6527.3.1.2.84.1.1.1
Each entry represents the configuration for a particular Dynamic Services profile. Entries in this table can be created and deleted via SNMP SET operations to tmnxDynSvcPlcyRowStatus.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxDynSvcPlcyEntry  

tmnxDynSvcPlcyName 1.3.6.1.4.1.6527.3.1.2.84.1.1.1.1
The value of tmnxDynSvcPlcyName specifies the identifier name of this Dynamic Services policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

tmnxDynSvcPlcyRowStatus 1.3.6.1.4.1.6527.3.1.2.84.1.1.1.2
The value of tmnxDynSvcPlcyRowStatus controls the creation and deletion of rows in the table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tmnxDynSvcPlcyLastCh 1.3.6.1.4.1.6527.3.1.2.84.1.1.1.3
The value of tmnxDynSvcPlcyLastCh indicates the sysUpTime at the time of the most recent management-initiated change to this conceptual row.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxDynSvcPlcyDescription 1.3.6.1.4.1.6527.3.1.2.84.1.1.1.4
The value of tmnxDynSvcPlcyDescription specifies the description of this Dynamic Services policy.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tmnxDynSvcPlcyScriptPlcy 1.3.6.1.4.1.6527.3.1.2.84.1.1.1.5
The value of tmnxDynSvcPlcyScriptPlcy specifies the identifier name of the script policy associated with this Dynamic Services policy. For a non-empty value, a row with the same value for the object tmnxRadScriptPlcyName must exist in the TIMETRA-RADIUS-MIB::tmnxRadScriptPlcyTable.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tmnxDynSvcPlcyCliUser 1.3.6.1.4.1.6527.3.1.2.84.1.1.1.6
The value of tmnxDynSvcPlcyCliUser specifies the identifier name of the CLI user associated with this Dynamic Services policy. For a non-empty value, a row with the same value for the object tmnxUserName must exist in the TIMETRA-SECURITY-MIB::tmnxUserTable.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tmnxDynSvcPlcySapLimit 1.3.6.1.4.1.6527.3.1.2.84.1.1.1.7
The value of tmnxDynSvcPlcySapLimit specifies the limit of the number of SAP's (Service Access Point) that can be created using this Dynamic Services policy. Each SAP counts for a dynamic service instance. Changing the value from any nonzero value to zero specifies that no new SAP's can be created.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..131072  

tmnxDynSvcPlcyApTable 1.3.6.1.4.1.6527.3.1.2.84.1.2
The tmnxDynSvcPlcyApTable allows configuration of accounting policies associated with Dynamic Services policies.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxDynSvcPlcyApEntry

tmnxDynSvcPlcyApEntry 1.3.6.1.4.1.6527.3.1.2.84.1.2.1
Each entry represents the configuration for a particular Dynamic Services profile. Two rows in this table are created automatically by the system for each row in the tmnxDynSvcPlcyTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxDynSvcPlcyApEntry  

tmnxDynSvcPlcyApIndex 1.3.6.1.4.1.6527.3.1.2.84.1.2.1.1
The value of tmnxDynSvcPlcyApIndex specifies the identifier number of this row within the scope of a Dynamic Services policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..2  

tmnxDynSvcPlcyApLastCh 1.3.6.1.4.1.6527.3.1.2.84.1.2.1.2
The value of tmnxDynSvcPlcyApLastCh indicates the sysUpTime at the time of the most recent management-initiated change to this conceptual row.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxDynSvcPlcyApName 1.3.6.1.4.1.6527.3.1.2.84.1.2.1.3
The value of tmnxDynSvcPlcyApName specifies the identifier name of a RADIUS server policy to be used for accounting. For a non-empty value, a row with the same value for the object tmnxRadSrvPlcyName must exist in the TIMETRA-RADIUS-MIB::tmnxRadSrvPlcyTable.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tmnxDynSvcPlcyApStatsType 1.3.6.1.4.1.6527.3.1.2.84.1.2.1.4
The value of tmnxDynSvcPlcyApStatsType specifies what type of statistics are sent to the accounting server.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxDynSrvAcctStatsType  

tmnxDynSvcPlcyApUpdateInterval 1.3.6.1.4.1.6527.3.1.2.84.1.2.1.5
The value of tmnxDynSvcPlcyApUpdateInterval specifies the time interval between consecutive accounting updates when using this Dynamic Services policy. The value zero specifies that no intermediate updates be sent.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0 | 5..259200  

tmnxDynSvcPlcyApUpdateIvlJitter 1.3.6.1.4.1.6527.3.1.2.84.1.2.1.6
The value of tmnxDynSvcPlcyApUpdateIvlJitter specifies the amount of jitter to be applied on the update interval which is configured in tmnxDynSvcPlcyApUpdateInterval and can be overruled by RADIUS. A value between 0..3600 specifies the amount of jitter in seconds. The (default) value -10 corresponds to a jitter value of 10% of the update interval. The operational value used by the system will never be bigger then 10% of the update interval.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER -10 | 0..3600  

tmnxDynSvcRange 1.3.6.1.4.1.6527.3.1.2.84.1.3
OBJECT IDENTIFIER    

tmnxDynSvcRangeStart 1.3.6.1.4.1.6527.3.1.2.84.1.3.1
The value of tmnxDynSvcRangeStart specifies the start of the range of service identifiers used as dynamic services.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxServId 0 | 1..2147483647  

tmnxDynSvcRangeEnd 1.3.6.1.4.1.6527.3.1.2.84.1.3.2
The value of tmnxDynSvcRangeEnd specifies the end of the range of service identifiers used as dynamic services. The value of tmnxDynSvcRangeEnd must be greater than or equal to the value of tmnxDynSvcRangeStart.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxServId 0 | 1..2147483647  

tmnxDynSvcSapTable 1.3.6.1.4.1.6527.3.1.2.84.1.4
The tmnxDynSvcSapTable contains the Service Access Points (SAP's) created for Dynamic Services. Conceptual rows in this table are created and destroyed automatically by the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxDynSvcSapEntry

tmnxDynSvcSapEntry 1.3.6.1.4.1.6527.3.1.2.84.1.4.1
Each conceptual row presents information about a particular Dynamic Services SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxDynSvcSapEntry  

tmnxDynSvcSapAcctSessionId 1.3.6.1.4.1.6527.3.1.2.84.1.4.1.1
The value of tmnxDynSvcSapAcctSessionId indicates the identifier used for accounting.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxSubAcctSessionId  

tmnxDynSvcSapAcctSessionIdCtrl 1.3.6.1.4.1.6527.3.1.2.84.1.4.1.2
The value of tmnxDynSvcSapAcctSessionIdCtrl indicates the identifier used for accounting of the Customer Premises Equipment's (CPE) control channel that is associated with this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxSubAcctSessionId  

tmnxDynSvcSapPolicy 1.3.6.1.4.1.6527.3.1.2.84.1.4.1.3
The value of tmnxDynSvcSapPolicy indicates the Dynamic Services policy associated with this SAP. It refers to a conceptual row in the tmnxDynSvcPlcyTable.
Status: current Access: read-only
OBJECT-TYPE    
  TNamedItemOrEmpty  

tmnxDynSvcSapScriptsExecuted 1.3.6.1.4.1.6527.3.1.2.84.1.4.1.4
The value of tmnxDynSvcSapScriptsExecuted indicates the number of times a script was executed for this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxDynSvcSapScriptsSuccess 1.3.6.1.4.1.6527.3.1.2.84.1.4.1.5
The value of tmnxDynSvcSapScriptsSuccess indicates the number of times a script was successfully executed for this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxDynSvcSapLastScriptAction 1.3.6.1.4.1.6527.3.1.2.84.1.4.1.6
The value of tmnxDynSvcSapLastScriptAction indicates the action of the last script executed for this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER setup(1), modify(2), teardown(3), commit(4), revert(5)  

tmnxDynSvcSapLastScriptTime 1.3.6.1.4.1.6527.3.1.2.84.1.4.1.7
The value of tmnxDynSvcSapLastScriptTime indicates the time when the last script executed for this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime Size(11)  

tmnxDynSvcSapOrphaned 1.3.6.1.4.1.6527.3.1.2.84.1.4.1.8
The value of tmnxDynSvcSapOrphaned indicates whether the corresponding SAP was not deleted after running the teardown portion of the script. If set to 'true', the SAP was not deleted, and manual action is needed to get rid of the SAP.
Status: obsolete Access: read-only
OBJECT-TYPE    
  TruthValue  

tmnxDynSvcSapService 1.3.6.1.4.1.6527.3.1.2.84.1.4.1.9
The value of tmnxDynSvcSapService indicates the parent service of this SAP. The value zero indicates that the parent service is currently unknown.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxServId  

tmnxDynSvcSapLastScriptParams 1.3.6.1.4.1.6527.3.1.2.84.1.4.1.10
The value of tmnxDynSvcSapLastScriptParams indicates the parameter string of the script instance that was last executed on this SAP. The value of this object corresponds with the content of the RADIUS vendor-specific Alc-Dyn-Serv-Script-Params option. The value of this object is subjected to the same constraints as for the DisplayString syntax.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..1000)  

tmnxDynSvcSapAcctTable 1.3.6.1.4.1.6527.3.1.2.84.1.5
The tmnxDynSvcSapAcctTable contains the Dynamic Services SAP's accounting information. Conceptual rows in this table are created and destroyed automatically by the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxDynSvcSapAcctEntry

tmnxDynSvcSapAcctEntry 1.3.6.1.4.1.6527.3.1.2.84.1.5.1
Each conceptual row presents information about an accounting instance of a particular Dynamic Services SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxDynSvcSapAcctEntry  

tmnxDynSvcSapAcctIndex 1.3.6.1.4.1.6527.3.1.2.84.1.5.1.1
The value of tmnxDynSvcSapAcctIndex specifies the identifier number of this conceptual row within the scope of a Dynamic Services SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..2  

tmnxDynSvcSapAcctAcctStatus 1.3.6.1.4.1.6527.3.1.2.84.1.5.1.2
The value of tmnxDynSvcSapAcctAcctStatus indicates the operational status of this accounting instance.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxEnabledDisabled  

tmnxDynSvcSapAcctStatsType 1.3.6.1.4.1.6527.3.1.2.84.1.5.1.3
The value of tmnxDynSvcSapAcctStatsType indicates the actual type of accounting statistics gathered by this accounting instance. It can be specified by the associated Dynamic Services policy (the object tmnxDynSvcPlcyApStatsType), or by the AAA server.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxDynSrvAcctStatsType  

tmnxDynSvcSapAcctAcctInterval 1.3.6.1.4.1.6527.3.1.2.84.1.5.1.4
The value of tmnxDynSvcSapAcctAcctInterval indicates the actual accounting update interval for this accounting instance. It can be specified by the associated Dynamic Services policy (the object tmnxDynSvcPlcyApUpdateInterval), or by the AAA server.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tmnxDynSvcRootObjTable 1.3.6.1.4.1.6527.3.1.2.84.1.6
The tmnxDynSvcRootObjTable contains information of the Root objects created by Dynamic Services. A root object is an object created by a Dynamic Service of which the parent is not created by a Dynamic Service. Conceptual rows in this table are created and destroyed automatically by the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxDynSvcRootObjEntry

tmnxDynSvcRootObjEntry 1.3.6.1.4.1.6527.3.1.2.84.1.6.1
Each conceptual row presents information about a Dynamic Services root object.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxDynSvcRootObjEntry  

tmnxDynSvcRootObjIndex 1.3.6.1.4.1.6527.3.1.2.84.1.6.1.1
The value of tmnxDynSvcRootObjIndex specifies the index that identifies this conceptual row within the scope of a Dynamic Services Root object.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

tmnxDynSvcRootObjInstance 1.3.6.1.4.1.6527.3.1.2.84.1.6.1.2
The value of tmnxDynSvcRootObjInstance indicates the concerned root object.
Status: current Access: read-only
OBJECT-TYPE    
  RowPointer  

tmnxDynSvcRootObjOrphanTime 1.3.6.1.4.1.6527.3.1.2.84.1.6.1.3
The value of tmnxDynSvcRootObjOrphanTime indicates the sysUpTime when the object was orphaned. When the object is not orphaned or when the time is unknown, the tmnxDynSvcRootObjOrphanTime is set to 0.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxDynSvcRootObjSnippetName 1.3.6.1.4.1.6527.3.1.2.84.1.6.1.4
The value of tmnxDynSvcRootObjSnippetName indicates the type-name from the snippet to which the root object belongs. A 'snippet' is the name of a set of python functions to create, modify or destroy configuration; for example: a snippet called 'vprn' in order to create/modify/destroy VPRN services. When the tmnxDynSvcRootObjSnippetName is an empty string it implies that there is no snippet.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

tmnxDynSvcRootObjSnippetInstance 1.3.6.1.4.1.6527.3.1.2.84.1.6.1.5
The value of tmnxDynSvcRootObjSnippetInstance indicates the identifier from the snippet to which the object belongs and is unique within the snippet scope. A 'snippet instance' is an instance of the configuration created by a snippet; for example: a particular VPRN service. When the tmnxDynSvcRootObjSnippetInstance is an empty string it implies that there is no snippet.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

tmnxDynSvcStatsTable 1.3.6.1.4.1.6527.3.1.2.84.1.7
The tmnxDynSvcStatsTable shows statistics information of the Dynamic Services.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxDynSvcStatsEntry

tmnxDynSvcStatsEntry 1.3.6.1.4.1.6527.3.1.2.84.1.7.1
Each conceptual row represents a statistic counter. Entries in this table are created and destroyed by the system. Rows are only created where the statistics value is nonzero; this allows faster walking through this table; hence, it is recommended to perform only get-next-request operations to retrieve information from this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxDynSvcStatsEntry  

tmnxDynSvcStatsId 1.3.6.1.4.1.6527.3.1.2.84.1.7.1.1
The value of tmnxDynSvcStatsId specifies the number that identifies this conceptual row within the scope of a Dynamic Services.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

tmnxDynSvcStatsDescr 1.3.6.1.4.1.6527.3.1.2.84.1.7.1.2
The value of the object tmnxDynSvcStatsDescr indicates the description of the statistic counter contained in this conceptual row.
Status: current Access: read-only
OBJECT-TYPE    
  TItemDescription  

tmnxDynSvcStatsVal 1.3.6.1.4.1.6527.3.1.2.84.1.7.1.3
The value of the object tmnxDynSvcStatsVal indicates the value of the statistics contained in this conceptual row.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxDynSvcSnippetTable 1.3.6.1.4.1.6527.3.1.2.84.1.8
The tmnxDynSvcSnippetTable contains information of the snippets created by Dynamic Services. Conceptual rows in this table are created and destroyed automatically by the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxDynSvcSnippetEntry

tmnxDynSvcSnippetEntry 1.3.6.1.4.1.6527.3.1.2.84.1.8.1
Each conceptual row presents information about a snippet within the scope of Dynamic Services.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxDynSvcSnippetEntry  

tmnxDynSvcSnippetName 1.3.6.1.4.1.6527.3.1.2.84.1.8.1.1
The value of tmnxDynSvcSnippetName specifies the type-name from the snippet that identifies this conceptual row within the scope of a Dynamic Services. The type-name is used to lookup the set of python functions to create, modify or destroy configuration; for example: a snippet with type-name 'vprn' could be used to create/modify/destroy VPRN services.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(0..32)  

tmnxDynSvcSnippetInstance 1.3.6.1.4.1.6527.3.1.2.84.1.8.1.2
The value of the object tmnxDynSvcSnippetInstance specifies the identifier from the snippet that in combination with the type-name uniquely identifies a snippet. A 'snippet instance' is an instance of the configuration created by a snippet; for example: a particular VPRN service.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(0..48)  

tmnxDynSvcSnippetRefCount 1.3.6.1.4.1.6527.3.1.2.84.1.8.1.3
The value of the object tmnxDynSvcSnippetRefCount indicates the number of times this snippet is referenced by other snippets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxDynSvcSnippetDictLength 1.3.6.1.4.1.6527.3.1.2.84.1.8.1.4
The value of the object tmnxDynSvcSnippetDictLength indicates the length of the python dictionary stored for this snippet.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tmnxDynSvcSnippetRootObjTable 1.3.6.1.4.1.6527.3.1.2.84.1.9
The tmnxDynSvcSnippetRootObjTable contains information of the root objects created by a snippet within the scope of a Dynamic Service. Conceptual rows in this table are created and destroyed automatically by the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxDynSvcSnippetRootObjEntry

tmnxDynSvcSnippetRootObjEntry 1.3.6.1.4.1.6527.3.1.2.84.1.9.1
Each conceptual row presents information about a root object created by a snippet within the scope of a Dynamic Service.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxDynSvcSnippetRootObjEntry  

tmnxDynSvcSnippetRootObjIdx 1.3.6.1.4.1.6527.3.1.2.84.1.9.1.1
The value of the object tmnxDynSvcSnippetRootObjIdx specifies the index that identifies this conceptual row within the scope of the snippet.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

tmnxDynSvcSnippetRootObjOid 1.3.6.1.4.1.6527.3.1.2.84.1.9.1.2
The value of the object tmnxDynSvcSnippetRootObjOid indicates the concerned root object that was created by the snippet.
Status: current Access: read-only
OBJECT-TYPE    
  RowPointer  

tmnxDynSvcSnippetRefTable 1.3.6.1.4.1.6527.3.1.2.84.1.10
The tmnxDynSvcSnippetRefTable contains information of the referenced snippets created by a python script within the scope of a Dynamic Service. Conceptual rows in this table are created and destroyed automatically by the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxDynSvcSnippetRefEntry

tmnxDynSvcSnippetRefEntry 1.3.6.1.4.1.6527.3.1.2.84.1.10.1
Each conceptual row presents information about a referenced snippet created by a python script within the scope of a Dynamic Service.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxDynSvcSnippetRefEntry  

tmnxDynSvcSnippetRefIdx 1.3.6.1.4.1.6527.3.1.2.84.1.10.1.1
The value of the object tmnxDynSvcSnippetRefIdx specifies the index that identifies this conceptual row within the scope of the snippet.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

tmnxDynSvcSnippetRefSnipName 1.3.6.1.4.1.6527.3.1.2.84.1.10.1.2
The value of the object tmnxDynSvcSnippetRefSnipName indicates the type-name from the snippet created or referenced by a python script.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

tmnxDynSvcSnippetRefSnipInst 1.3.6.1.4.1.6527.3.1.2.84.1.10.1.3
The value of the object tmnxDynSvcSnippetRefSnipInst indicates the identifier from the snippet created or referenced by a python script.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..48)  

tmnxDynSvcSnippetResIdTable 1.3.6.1.4.1.6527.3.1.2.84.1.11
The tmnxDynSvcSnippetResIdTable contains information of the identifiers reserved by a python script within the scope of a Dynamic Service. Conceptual rows in this table are created and destroyed automatically by the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxDynSvcSnippetResIdEntry

tmnxDynSvcSnippetResIdEntry 1.3.6.1.4.1.6527.3.1.2.84.1.11.1
Each conceptual row presents information about an identifier reserved by a python script within the scope of a Dynamic Service.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxDynSvcSnippetResIdEntry  

tmnxDynSvcSnippetResIdIdx 1.3.6.1.4.1.6527.3.1.2.84.1.11.1.1
The value of the object tmnxDynSvcSnippetResIdIdx specifies the index that identifies this conceptual row within the scope of the snippet.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

tmnxDynSvcSnippetResIdType 1.3.6.1.4.1.6527.3.1.2.84.1.11.1.2
The value of the object tmnxDynSvcSnippetResIdType indicates the type-name from the identifier reserved by a python script.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

tmnxDynSvcSnippetResIdValue 1.3.6.1.4.1.6527.3.1.2.84.1.11.1.3
The value of the object tmnxDynSvcSnippetResIdValue indicates the value from the identifier reserved by a python script.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..48)  

tmnxDynSvcTimer 1.3.6.1.4.1.6527.3.1.2.84.1.12
OBJECT IDENTIFIER    

tmnxDynSvcTimerAccSetupTimeout 1.3.6.1.4.1.6527.3.1.2.84.1.12.1
The value of tmnxDynSvcTimerAccSetupTimeout specifies the timeout in seconds after which a script is cancelled for setup actions received via RADIUS Access-Accept messages.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 2..3600  

tmnxDynSvcPlcyAuthTable 1.3.6.1.4.1.6527.3.1.2.84.1.13
The tmnxDynSvcPlcyAuthTable allows configuration of authentication parameters associated with Dynamic Services policies.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxDynSvcPlcyAuthEntry

tmnxDynSvcPlcyAuthEntry 1.3.6.1.4.1.6527.3.1.2.84.1.13.1
Each entry represents the configuration for a particular Dynamic Services profile. An entry in this table is automatically created by the system for each row in the tmnxDynSvcPlcyTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxDynSvcPlcyAuthEntry  

tmnxDynSvcPlcyAuthLastCh 1.3.6.1.4.1.6527.3.1.2.84.1.13.1.1
The value of tmnxDynSvcPlcyAuthLastCh indicates the sysUpTime at the time of the most recent management-initiated change to this conceptual row.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxDynSvcPlcyAuthRadiusSrvPlcy 1.3.6.1.4.1.6527.3.1.2.84.1.13.1.2
The value of tmnxDynSvcPlcyAuthRadiusSrvPlcy specifies the RADIUS server policy to be used for authentication. For a non-empty value, a row with the same value for the object tmnxRadSrvPlcyName must exist in the TIMETRA-RADIUS-MIB::tmnxRadSrvPlcyTable.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tmnxDynSvcPlcyAuthPassword 1.3.6.1.4.1.6527.3.1.2.84.1.13.1.3
The value of tmnxDynSvcPlcyAuthPassword specifies the password for going to the RADIUS server. An empty string is returned on SNMP GET requests.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxAuthPassword  

tmnxDynSvcPlcyAuthLocalDb 1.3.6.1.4.1.6527.3.1.2.84.1.13.1.4
The value of tmnxDynSvcPlcyAuthLocalDb specifies the local database to be used for authentication. For a non-empty value, a row with the same value for the object tmnxDynSvcLocAuthDbName must exist in the tmnxDynSvcLocalAuthDbTable.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tmnxDynSvcCaptureSapTable 1.3.6.1.4.1.6527.3.1.2.84.1.14
A table that contains Dynamic Services configuration for capture SAPs. It allows to dynamically create dynamic SAPs based on incoming data packets. A row is automatically created in the tmnxDynSvcCaptureSapTable for an entry in the sapBaseInfoTable where the value of the object sapSubType is equal to 'capture' and the SAP's encapsulation allows creation of dynamic SAPs.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxDynSvcCaptureSapEntry

tmnxDynSvcCaptureSapEntry 1.3.6.1.4.1.6527.3.1.2.84.1.14.1
Dynamic Services specific configuration for a capture SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxDynSvcCaptureSapEntry  

tmnxDynSvcCaptureSapLastCh 1.3.6.1.4.1.6527.3.1.2.84.1.14.1.1
The value of tmnxDynSvcCaptureSapLastCh indicates the sysUpTime at the time of the most recent management-initiated change to this conceptual row.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxDynSvcCaptureSapAdminState 1.3.6.1.4.1.6527.3.1.2.84.1.14.1.2
The value of tmnxDynSvcCaptureSapAdminState specifies the administrative state of this capture SAP. If the value of this field is set 'inService', data packets coming in on this capture SAP will get authenticated and, if successful, result in the creation of Dynamic Services SAPs.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxAdminState  

tmnxDynSvcCaptureSapPolicy 1.3.6.1.4.1.6527.3.1.2.84.1.14.1.3
The value of tmnxDynSvcCaptureSapPolicy specifies the Dynamic Services policy associated with this capture SAP. Its use is two-fold: - define the parameters to authenticate the incoming data packet - used as default Dynamic Services Policy when authentication does not return one. It refers to a conceptual row in the tmnxDynSvcPlcyTable.
Status: current Access: read-write
OBJECT-TYPE    
  TNamedItemOrEmpty  

tmnxDynSvcCaptureSapStatsTable 1.3.6.1.4.1.6527.3.1.2.84.1.15
The tmnxDynSvcCaptureSapStatsTable contains statistics about the capture SAPs of this system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxDynSvcCaptureSapStatsEntry

tmnxDynSvcCaptureSapStatsEntry 1.3.6.1.4.1.6527.3.1.2.84.1.15.1
Each conceptual row represents statistics about a particular capture SAP. Rows are created and destroyed automatically by the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxDynSvcCaptureSapStatsEntry  

tmnxDynSvcCSapStatsRxPackets 1.3.6.1.4.1.6527.3.1.2.84.1.15.1.1
The value of tmnxDynSvcCSapStatsRxPackets indicates the total number of data packets received by this capture SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxDynSvcCaptureSapDropTable 1.3.6.1.4.1.6527.3.1.2.84.1.16
The tmnxDynSvcCaptureSapDropTable contains data-trigger related drop statistics about the capture SAPs of this system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxDynSvcCaptureSapDropEntry

tmnxDynSvcCaptureSapDropEntry 1.3.6.1.4.1.6527.3.1.2.84.1.16.1
Each conceptual row represents information about a specific drop reason. Rows are created and destroyed automatically by the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxDynSvcCaptureSapDropEntry  

tmnxDynSvcCSapDropIndex 1.3.6.1.4.1.6527.3.1.2.84.1.16.1.1
The value of tmnxDynSvcCSapDropIndex specifies the index of this row.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..9  

tmnxDynSvcCSapDropReason 1.3.6.1.4.1.6527.3.1.2.84.1.16.1.2
The value of tmnxDynSvcCSapDropReason indicates a descriptive reason explaining the cause of drop.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..64)  

tmnxDynSvcCSapDropCounter 1.3.6.1.4.1.6527.3.1.2.84.1.16.1.3
The value of tmnxDynSvcCSapDropCounter indicates the amount of data-triggers dropped corresponding to this row.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxDynSvcDataTriggerTable 1.3.6.1.4.1.6527.3.1.2.84.1.17
The tmnxDynSvcDataTriggerTable contains the Data Triggers created for Dynamic Services. Conceptual rows in this table are created and destroyed automatically by the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxDynSvcDataTriggerEntry

tmnxDynSvcDataTriggerEntry 1.3.6.1.4.1.6527.3.1.2.84.1.17.1
Each conceptual row presents information about a particular Data Trigger.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxDynSvcDataTriggerEntry  

tmnxDynSvcDTriggerAcctSessionId 1.3.6.1.4.1.6527.3.1.2.84.1.17.1.1
The value of tmnxDynSvcDTriggerAcctSessionId indicates the identifier used for accounting.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxSubAcctSessionId  

tmnxDynSvcDTriggerMacAddress 1.3.6.1.4.1.6527.3.1.2.84.1.17.1.2
The value of tmnxDynSvcDTriggerMacAddress indicates the MAC address of the incoming data packet triggering the creation of this row.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

tmnxDynSvcDTriggerIpAddressType 1.3.6.1.4.1.6527.3.1.2.84.1.17.1.3
The value of tmnxDynSvcDTriggerIpAddressType indicates the type of address stored in tmnxDynSvcDTriggerIpAddress.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

tmnxDynSvcDTriggerIpAddress 1.3.6.1.4.1.6527.3.1.2.84.1.17.1.4
The value of tmnxDynSvcDTriggerIpAddress indicates the IP address of the incoming data packet triggering the creation of this row. If this row was created by a non-IP packet, the value of tmnxDynSvcDTriggerIpAddressType returns 'unknown'.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

tmnxDynSvcDTriggerState 1.3.6.1.4.1.6527.3.1.2.84.1.17.1.5
The value of tmnxDynSvcDTriggerState indicates the current state of the Data Trigger corresponding to this row: - 'pending' : authentication is going on - 'accepted' : authentication has been finished and was successful - 'sapCreated': the dynamic SAP has been created
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER pending(1), accepted(2), sapCreated(3)  

tmnxDynSvcLocalAuthDbTable 1.3.6.1.4.1.6527.3.1.2.84.1.18
The tmnxDynSvcLocalAuthDbTable allows configuration of local authentication databases for data-triggered Dynamic Services.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxDynSvcLocalAuthDbEntry

tmnxDynSvcLocalAuthDbEntry 1.3.6.1.4.1.6527.3.1.2.84.1.18.1
Each entry represents the configuration for a particular database. Entries in this table can be created and deleted via SNMP SET operations to tmnxDynSvcLocAuthDbRowStatus.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxDynSvcLocalAuthDbEntry  

tmnxDynSvcLocAuthDbName 1.3.6.1.4.1.6527.3.1.2.84.1.18.1.1
The value of tmnxDynSvcLocAuthDbName specifies the identifier name of this database.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

tmnxDynSvcLocAuthDbRowStatus 1.3.6.1.4.1.6527.3.1.2.84.1.18.1.2
The value of tmnxDynSvcLocAuthDbRowStatus controls the creation and deletion of rows in the table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tmnxDynSvcLocAuthDbLastCh 1.3.6.1.4.1.6527.3.1.2.84.1.18.1.3
The value of tmnxDynSvcLocAuthDbLastCh indicates the sysUpTime at the time of the most recent management-initiated change to this conceptual row.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxDynSvcLocAuthDbAdminState 1.3.6.1.4.1.6527.3.1.2.84.1.18.1.4
The value of tmnxDynSvcLocAuthDbAdminState specifies the administrative state of this database.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxAdminState  

tmnxDynSvcLocAuthDbDescription 1.3.6.1.4.1.6527.3.1.2.84.1.18.1.5
The value of tmnxDynSvcLocAuthDbDescription specifies the description of this database.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tmnxDynSvcLocalAuthDbUserTable 1.3.6.1.4.1.6527.3.1.2.84.1.19
The tmnxDynSvcLocalAuthDbUserTable allows configuration of user entries in the local authentication databases defined in the tmnxDynSvcLocalAuthDbTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxDynSvcLocalAuthDbUserEntry

tmnxDynSvcLocalAuthDbUserEntry 1.3.6.1.4.1.6527.3.1.2.84.1.19.1
Each entry represents the configuration for a particular user entry. Entries in this table can be created and deleted via SNMP SET operations to tmnxDynSvcLocADbUsrRowStatus.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxDynSvcLocalAuthDbUserEntry  

tmnxDynSvcLocADbUsrName 1.3.6.1.4.1.6527.3.1.2.84.1.19.1.1
The value of tmnxDynSvcLocADbUsrName specifies the user-name of this entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..64)  

tmnxDynSvcLocADbUsrRowStatus 1.3.6.1.4.1.6527.3.1.2.84.1.19.1.2
The value of tmnxDynSvcLocADbUsrRowStatus controls the creation and deletion of rows in the table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tmnxDynSvcLocADbUsrLastCh 1.3.6.1.4.1.6527.3.1.2.84.1.19.1.3
The value of tmnxDynSvcLocADbUsrLastCh indicates the sysUpTime at the time of the most recent management-initiated change to this conceptual row.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxDynSvcLocADbUsrAdminState 1.3.6.1.4.1.6527.3.1.2.84.1.19.1.4
The value of tmnxDynSvcLocADbUsrAdminState specifies the administrative state of this user entry.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxAdminState  

tmnxDynSvcLocADbUsrDescription 1.3.6.1.4.1.6527.3.1.2.84.1.19.1.5
The value of tmnxDynSvcLocADbUsrDescription specifies the description of this user entry.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tmnxDynSvcLocalAuthDbSapTable 1.3.6.1.4.1.6527.3.1.2.84.1.20
The tmnxDynSvcLocalAuthDbSapTable allows configuration of per-user SAP entries in the local authentication databases defined in the tmnxDynSvcLocalAuthDbUserTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxDynSvcLocalAuthDbSapEntry

tmnxDynSvcLocalAuthDbSapEntry 1.3.6.1.4.1.6527.3.1.2.84.1.20.1
Each entry represents the configuration for a particular per-user SAP entry. Entries in this table can be created and deleted via SNMP SET operations to tmnxDynSvcLocADbSapRowStatus.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxDynSvcLocalAuthDbSapEntry  

tmnxDynSvcLocADbSapIndex 1.3.6.1.4.1.6527.3.1.2.84.1.20.1.1
The value of tmnxDynSvcLocADbSapIndex specifies the index of this entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..32  

tmnxDynSvcLocADbSapRowStatus 1.3.6.1.4.1.6527.3.1.2.84.1.20.1.2
The value of tmnxDynSvcLocADbSapRowStatus controls the creation and deletion of rows in the table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tmnxDynSvcLocADbSapLastCh 1.3.6.1.4.1.6527.3.1.2.84.1.20.1.3
The value of tmnxDynSvcLocADbSapLastCh indicates the sysUpTime at the time of the most recent management-initiated change to this conceptual row.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxDynSvcLocADbSapSapId 1.3.6.1.4.1.6527.3.1.2.84.1.20.1.4
The value of tmnxDynSvcLocADbSapSapId specifies the SAP identifier of this SAP entry.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

tmnxDynSvcLocADbSapPolicy 1.3.6.1.4.1.6527.3.1.2.84.1.20.1.5
The value of tmnxDynSvcLocADbSapPolicy specifies the Dynamic Services policy of this SAP entry.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tmnxDynSvcLocADbSapScriptParams1 1.3.6.1.4.1.6527.3.1.2.84.1.20.1.6
The value of tmnxDynSvcLocADbSapScriptParams1 specifies the Python script parameters of this SAP entry.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..250)  

tmnxDynSvcLocADbSapScriptParams2 1.3.6.1.4.1.6527.3.1.2.84.1.20.1.7
The value of tmnxDynSvcLocADbSapScriptParams2 specifies the Python script parameters of this SAP entry.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..250)  

tmnxDynSvcLocADbSapScriptParams3 1.3.6.1.4.1.6527.3.1.2.84.1.20.1.8
The value of tmnxDynSvcLocADbSapScriptParams3 specifies the Python script parameters of this SAP entry.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..250)  

tmnxDynSvcLocADbSapScriptParams4 1.3.6.1.4.1.6527.3.1.2.84.1.20.1.9
The value of tmnxDynSvcLocADbSapScriptParams4 specifies the Python script parameters of this SAP entry.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..250)  

tmnxDynSvcLocalAuthDbAcctTable 1.3.6.1.4.1.6527.3.1.2.84.1.21
The tmnxDynSvcLocalAuthDbAcctTable allows accounting configuration of per-user SAP entries in the local authentication databases defined in the tmnxDynSvcLocalAuthDbSapTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxDynSvcLocalAuthDbAcctEntry

tmnxDynSvcLocalAuthDbAcctEntry 1.3.6.1.4.1.6527.3.1.2.84.1.21.1
Each entry represents the configuration for a particular accounting instance. Entries in this table can be created and deleted via SNMP SET operations to tmnxDynSvcLocADbAcctRowStatus.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxDynSvcLocalAuthDbAcctEntry  

tmnxDynSvcLocADbAcctIndex 1.3.6.1.4.1.6527.3.1.2.84.1.21.1.1
The value of tmnxDynSvcLocADbAcctIndex specifies the accounting instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..2  

tmnxDynSvcLocADbAcctRowStatus 1.3.6.1.4.1.6527.3.1.2.84.1.21.1.2
The value of tmnxDynSvcLocADbAcctRowStatus controls the creation and deletion of rows in the table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tmnxDynSvcLocADbAcctLastCh 1.3.6.1.4.1.6527.3.1.2.84.1.21.1.3
The value of tmnxDynSvcLocADbAcctLastCh indicates the sysUpTime at the time of the most recent management-initiated change to this conceptual row.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxDynSvcLocADbAcctStatsType 1.3.6.1.4.1.6527.3.1.2.84.1.21.1.4
The value of tmnxDynSvcLocADbAcctStatsType specifies the type of statistics.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER off(1), volumeTime(2), time(3)  

tmnxDynSvcLocADbAcctUpdateIvl 1.3.6.1.4.1.6527.3.1.2.84.1.21.1.5
The value of tmnxDynSvcLocADbAcctUpdateIvl specifies the time interval between consecutive accounting updates. The value zero specifies that no intermediate updates be sent.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0 | 5..259200  

tmnxDynSvcPlcyTableLastCh 1.3.6.1.4.1.6527.3.1.2.84.1.100
The value of the object tmnxDynSvcPlcyTableLastCh indicates the value of sysUpTime at the time of the last modification of an entry in the tmnxDynSvcPlcyTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxDynSvcPlcyApTableLastCh 1.3.6.1.4.1.6527.3.1.2.84.1.101
The value of the object tmnxDynSvcPlcyApTableLastCh indicates the value of sysUpTime at the time of the last modification of an entry in the tmnxDynSvcPlcyApTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxDynSvcSapTableLastCh 1.3.6.1.4.1.6527.3.1.2.84.1.102
The value of tmnxDynSvcSapTableLastCh indicates the sysUpTime at the time of the last change of a row in the tmnxDynSvcSapTable or an associated row in the tmnxDynSvcSapAcctTable. If no changes occurred since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxDynSvcRootObjTableLastCh 1.3.6.1.4.1.6527.3.1.2.84.1.103
The value of the object tmnxDynSvcRootObjTableLastCh indicates the value of sysUpTime at the time of the last modification of an entry in the tmnxDynSvcRootObjTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxDynSvcNonStoredRootObjCount 1.3.6.1.4.1.6527.3.1.2.84.1.104
The value of the object tmnxDynSvcNonStoredRootObjCount indicates the number of root objects that are currently not stored in the tmnxDynSvcRootObjTable. The value of tmnxDynSvcNonStoredRootObjCount can go back to 0 when the objects that could not be stored in the tmnxDynSvcRootObjTable are deleted again.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxDynSvcSnippetTableLastCh 1.3.6.1.4.1.6527.3.1.2.84.1.105
The value of the object tmnxDynSvcSnippetTableLastCh indicates the value of sysUpTime at the time of the last modification of an entry in the tmnxDynSvcSnippetTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxDynSvcSnipRootObjTblLastCh 1.3.6.1.4.1.6527.3.1.2.84.1.106
The value of the object tmnxDynSvcSnipRootObjTblLastCh indicates the value of sysUpTime at the time of the last modification of an entry in the tmnxDynSvcSnippetRootObjTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxDynSvcSnippetRefTableLastCh 1.3.6.1.4.1.6527.3.1.2.84.1.107
The value of the object tmnxDynSvcSnippetRefTableLastCh indicates the value of sysUpTime at the time of the last modification of an entry in the tmnxDynSvcSnippetRefTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxDynSvcSnippetResIdTblLastCh 1.3.6.1.4.1.6527.3.1.2.84.1.108
The value of the object tmnxDynSvcSnippetResIdTblLastCh indicates the value of sysUpTime at the time of the last modification of an entry in the tmnxDynSvcSnippetResIdTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxDynSvcStatsLastClearedTime 1.3.6.1.4.1.6527.3.1.2.84.1.109
The value of the object tmnxDynSvcStatsLastClearedTime indicates the value of sysUpTime at the time when the counters in tmnxDynSvcStatsTable were last cleared.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxDynSvcPlcyAuthTableLastCh 1.3.6.1.4.1.6527.3.1.2.84.1.110
The value of the object tmnxDynSvcPlcyAuthTableLastCh indicates the value of sysUpTime at the time of the last modification of an entry in the tmnxDynSvcPlcyAuthTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxDynSvcCaptureSapTableLastCh 1.3.6.1.4.1.6527.3.1.2.84.1.111
The value of the object tmnxDynSvcCaptureSapTableLastCh indicates the value of sysUpTime at the time of the last modification of an entry in the tmnxDynSvcCaptureSapTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxDynSvcCSapStatsLastClearTime 1.3.6.1.4.1.6527.3.1.2.84.1.112
The value of the object tmnxDynSvcCSapStatsLastClearTime indicates the value of sysUpTime at the time when the counters in tmnxDynSvcCaptureSapStatsTable were last cleared.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxDynSvcDataTriggerTableLastCh 1.3.6.1.4.1.6527.3.1.2.84.1.113
The value of the object tmnxDynSvcDataTriggerTableLastCh indicates the value of sysUpTime at the time of the last modification of an entry in the tmnxDynSvcDataTriggerTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxDynSvcLocADbTableLastCh 1.3.6.1.4.1.6527.3.1.2.84.1.114
The value of the object tmnxDynSvcLocADbTableLastCh indicates the value of sysUpTime at the time of the last modification of an entry in the tmnxDynSvcLocalAuthDbTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxDynSvcLocADbUsrTableLastCh 1.3.6.1.4.1.6527.3.1.2.84.1.115
The value of the object tmnxDynSvcLocADbUsrTableLastCh indicates the value of sysUpTime at the time of the last modification of an entry in the tmnxDynSvcLocalAuthDbUserTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxDynSvcLocADbSapTableLastCh 1.3.6.1.4.1.6527.3.1.2.84.1.116
The value of the object tmnxDynSvcLocADbSapTableLastCh indicates the value of sysUpTime at the time of the last modification of an entry in the tmnxDynSvcLocalAuthDbSapTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxDynSvcLocADbAcctTableLastCh 1.3.6.1.4.1.6527.3.1.2.84.1.117
The value of the object tmnxDynSvcLocADbAcctTableLastCh indicates the value of sysUpTime at the time of the last modification of an entry in the tmnxDynSvcLocalAuthDbAcctTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxDynSvcNotifDescription 1.3.6.1.4.1.6527.3.1.2.84.2.1
The object tmnxDynSvcNotifDescription is a printable character string.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString Size(0..255)  

tmnxDynSvcNotifSapPortId 1.3.6.1.4.1.6527.3.1.2.84.2.2
The object tmnxDynSvcNotifSapPortId is the ID number of the access port where a SAP is defined.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  TmnxPortID  

tmnxDynSvcNotifSapEncapValue 1.3.6.1.4.1.6527.3.1.2.84.2.3
The object tmnxDynSvcNotifSapEncapValue is the value of the label used to identify a SAP on the access port specified by tmnxDynSvcNotifSapPortId.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  TmnxEncapVal  

tmnxDynSvcNotifSapAcctSessionId 1.3.6.1.4.1.6527.3.1.2.84.2.4
The object tmnxDynSvcNotifSapAcctSessionId is the value of the identifier used for accounting.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  TmnxSubAcctSessionId  

tmnxDynSvcSapFailed 1.3.6.1.4.1.6527.3.1.3.84.0.1
[CAUSE] The tmnxDynSvcSapFailed notification is sent when a Dynamic Services service SAP creation, modification or removal failed. [EFFECT] The desired new configuration is not in effect; the system has returned to the original configuration if possible. [RECOVERY] No recovery is necessary when the original configuration could be restored. If the SAP does not exist in the tmnxDynSvcSapTable at the time of this notification, the value 'invalid portid' is put in the object tmnxDynSvcNotifSapPortId.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxDynSvcGroup 1.3.6.1.4.1.6527.3.1.1.84.2.1
The group of objects for the management of Dynamic Services on Nokia SROS series systems.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

tmnxDynSvcV14v0Group 1.3.6.1.4.1.6527.3.1.1.84.2.2
The group of objects for the management of Dynamic Services on Nokia SROS series systems in release 14.0.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxDynSvcObsoletedGroup 1.3.6.1.4.1.6527.3.1.1.84.2.98
The group of obsoleted objects for the management of Dynamic Services on Nokia SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxDynSvcNotifyObjsGroup 1.3.6.1.4.1.6527.3.1.1.84.2.99
The group of notification objects supporting Dynamic Services notifications on Nokia SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxDynSvcNotifyGroup 1.3.6.1.4.1.6527.3.1.1.84.2.100
The group of notifications supporting Dynamic Services on Nokia SROS series systems.
Status: current Access: accessible-for-notify
NOTIFICATION-GROUP    

tmnxDynSvcCompliance 1.3.6.1.4.1.6527.3.1.1.84.1.1
The compliance statement for management of Dynamic Services on Nokia 7xxx series systems.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

tmnxDynSvcNotifyCompliance 1.3.6.1.4.1.6527.3.1.1.84.1.2
The compliance statement for Dynamic Services notifications on Nokia SROS series systems.
Status: current Access: accessible-for-notify
MODULE-COMPLIANCE    

tmnxDynSvcV14v0Compliance 1.3.6.1.4.1.6527.3.1.1.84.1.3
The compliance statement for management of Dynamic Services on Nokia 7xxx series systems.
Status: current Access: accessible-for-notify
MODULE-COMPLIANCE