TIARA-FR-MIB

Imported modules

SNMPv2-SMI	SNMPv2-TC	RFC1213-MIB
TIARA-BUNDLE-MIB	TIARA-NETWORKS-SMI

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	IpAddress
Integer32	Counter32	TruthValue
RowStatus	DisplayString	bundleId
tiaraMgmt

Defined Types

FrTableEntry
SEQUENCE
	frIfEnable	TruthValue
	frEnablePvcAll	TruthValue
	frFrameSize	Integer32	56..4096
	frIfType	INTEGER
	frLmiType	INTEGER
	frLmiDceN392	Integer32	1..10
	frLmiDceN393	Integer32	1..10
	frLmiDteN392	Integer32	1..10
	frLmiDteN393	Integer32	1..10
	frLmiDteN391	Integer32	1..255
	frLmiKeepalive	Integer32	5..255
	mfrAckMsgTimer	Integer32	1..10
	mfrAckMsgMaxRetry	Integer32	1..5
	mfrClass	INTEGER
	mfrClassThreshold	Integer32	1..28
	mfrFrameSize	Integer32	56..4096
	mfrHelloTimer	Integer32	1..180
	mfrSegThreshold	Integer32	56..4096
	mfrDiffDelay	Integer32	10..128

FrPvcTableEntry
SEQUENCE
	frPvcDlci	Integer32	16..991
	frPvcEnable	TruthValue
	frPvcDescr	DisplayString
	frPvcIpAddr	IpAddress
	frPvcIpSubnetMask	IpAddress
	frPvcSrcForwardingPrimary	IpAddress
	frPvcSrcForwardingSecondary	IpAddress
	frPvcRemoteIpAddr	IpAddress
	frPvcPolicingEnable	INTEGER
	frPvcPolicingDe	TruthValue
	frPvcPolicingCir	Integer32
	frPvcPolicingBc	Integer32
	frPvcPolicingBe	Integer32
	frPvcShapingCir	Integer32
	frPvcShapingBcMax	Integer32
	frPvcShapingBcMin	Integer32
	frPvcShapingBe	Integer32
	frPvcDlciForSwitching	Integer32
	frPvcBundleNameForSwitching	DisplayString
	frPvcRowStatus	RowStatus

FrStatsTableEntry
SEQUENCE
	frStatsFramesRx	Counter32
	frStatsInvFramesRx	Counter32
	frStatsFECNsRx	Counter32
	frStatsBECNsRx	Counter32
	frStatsShortFramesRx	Counter32
	frStatsLongFramesRx	Counter32
	frStatsInvDLCIsRx	Counter32
	frStatsUnknownDLCIsRx	Counter32
	frStatsFramesTx	Counter32

FrPvcStatsTableEntry
SEQUENCE
	frPvcStatsBytesRxLastBootOrClear	Counter32
	frPvcStatsBytesTxLastBootOrClear	Counter32
	frPvcStatsPktsRxLastBootOrClear	Counter32
	frPvcStatsPktsTxLastBootOrClear	Counter32
	frPvcStatsErrPktsRxLastBootOrClear	Counter32
	frPvcStatsUpDownStatesLastBootOrClear	Counter32
	frPvcStatsBytesRxLastFiveMins	Counter32
	frPvcStatsBytesTxLastFiveMins	Counter32
	frPvcStatsPktsRxLastFiveMins	Counter32
	frPvcStatsPktsTxLastFiveMins	Counter32
	frPvcStatsErrPktsRxLastFiveMins	Counter32
	frPvcStatsUpDownStatesLastFiveMins	Counter32

FrAvcTableEntry
SEQUENCE
	frAvcId	INTEGER
	frAvcDlci	Integer32	16..991
	frAvcName	DisplayString
	frAvcDescr	DisplayString
	frAvcIpAddr	IpAddress
	frAvcIpSubnetMask	IpAddress
	frAvcSrcForwardingPrimary	IpAddress
	frAvcSrcForwardingSecondary	IpAddress
	frAvcRemoteIpAddr	IpAddress
	frAvcClass	INTEGER
	frAvcClassThreshold	Integer32
	frAvcFragmentSize	Integer32
	frAvcSegThreshold	Integer32
	frAvcSequence	INTEGER
	frAvcNoOfCvcs	Integer32
	frAvcTotalBw	Integer32
	frAvcRowStatus	RowStatus

FrCvcTableEntry
SEQUENCE
	frCvcDlci	Integer32	16..991
	frCvcBundleName	DisplayString

AvcStatsTableEntry
SEQUENCE
	frAvcStatsBytesRxLastBootOrClear	Counter32
	frAvcStatsBytesTxLastBootOrClear	Counter32
	frAvcStatsPktsRxLastBootOrClear	Counter32
	frAvcStatsPktsTxLastBootOrClear	Counter32
	frAvcStatsErrPktsRxLastBootOrClear	Counter32
	frAvcStatsUpDownStatesLastBootOrClear	Counter32
	frAvcStatsBytesRxLastFiveMins	Counter32
	frAvcStatsBytesTxLastFiveMins	Counter32
	frAvcStatsPktsRxLastFiveMins	Counter32
	frAvcStatsPktsTxLastFiveMins	Counter32
	frAvcStatsErrPktsRxLastFiveMins	Counter32
	frAvcStatsUpDownStatesLastFiveMins	Counter32

Defined Values

tiaraFrMib		1.3.6.1.4.1.3174.2.16
This file contains Tiara Network Inc. specific MIB module for Frame Relay implementation.
MODULE-IDENTITY

frTable		1.3.6.1.4.1.3174.2.16.1
A list of a Frame Relay interface configuration parameters. The table contains parameters for both the uni and multi link frame-relay interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		FrTableEntry

frTableEntry		1.3.6.1.4.1.3174.2.16.1.1
An entry in the frTable. The bundle Id forms the index into the table.
Status: current	Access: not-accessible
OBJECT-TYPE
	FrTableEntry

frIfEnable		1.3.6.1.4.1.3174.2.16.1.1.1
Enables or disables the frame-relay interface. By default frame- relay interface is enabled. Writing zero (0) disables frame-relay interface.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

frEnablePvcAll		1.3.6.1.4.1.3174.2.16.1.1.2
Enables all PVCs related to the interface. By default all PVCs related to an interface are disabled. Writing One (1) enables all PVCs at the same time for an interface indexed by bundleId.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

frFrameSize		1.3.6.1.4.1.3174.2.16.1.1.3
Maximum Size of the frame that will be configured for this Frame Relay interface. The value for frame size ranges from 56 to 4096 bytes, with a default value of 1600 bytes.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	56..4096

frIfType		1.3.6.1.4.1.3174.2.16.1.1.4
Indicates the interface type for the frame-relay interface.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	dce(1), dte(2), nni(3)

frLmiType		1.3.6.1.4.1.3174.2.16.1.1.5
Local management Interface type for the frame-relay interface. It can take any of the following three values: ansi - ANSI T1.617 (Annex D), cisco - Cisco LMI, q933a - ITU-T Q.933 (Annex A) To disable lmi operation, set the value to none(0).
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	none(0), cisco(2), ansi(3), q933a(4)

frLmiDceN392		1.3.6.1.4.1.3174.2.16.1.1.6
DCE/UNI error threshold value. Ranges from 1 to 10, with a default value of 9. To configure the value of this variable, LMI type should be configured.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..10

frLmiDceN393		1.3.6.1.4.1.3174.2.16.1.1.7
DCE/UNI monitored events count. Ranges from 1 to 10, with a default value of 10. To configure the value of this variable, LMI type should be configured.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..10

frLmiDteN392		1.3.6.1.4.1.3174.2.16.1.1.8
DTE/UNI error threshold. Ranges from 1 to 10, with a default value of 9. To configure the value of this variable, LMI type should be configured.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..10

frLmiDteN393		1.3.6.1.4.1.3174.2.16.1.1.9
DTE/UNI monitored events count. Ranges from 1 to 10, with a default value of 10. To configure the value of this variable, LMI type should be configured.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..10

frLmiDteN391		1.3.6.1.4.1.3174.2.16.1.1.10
DTE/UNI full status polling interval. Ranges from 1 to 255, with a default value of 6. To configure the value of this variable, LMI type should be configured.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..255

frLmiKeepalive		1.3.6.1.4.1.3174.2.16.1.1.11
Local management interface keepalive polling interval time in seconds. The value for this ranges from 5 seconds to 255 seconds with a default value of 10 seconds. To configure the value of this variable, LMI type should be configured.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	5..255

mfrAckMsgTimer		1.3.6.1.4.1.3174.2.16.1.1.12
The time to wait for an ADD_LINK_ACK message before timing out.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..10

mfrAckMsgMaxRetry		1.3.6.1.4.1.3174.2.16.1.1.13
Maximum number of Retries for the Ack Msg. This variable can be set on a multilink bundle.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..5

mfrClass		1.3.6.1.4.1.3174.2.16.1.1.14
classA -- bundle is UP when 1 link is UP classB -- bundle is UP when all links are UP classC -- bundle is UP when user-specific # of links are UP. In the case of classC, mfrClassThreshold should be configured with mfrClass in an atomic set operation. This variable can be set on a multilink bundle but not on a uni link bundle.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	classA(1), classB(2), classC(3)

mfrClassThreshold		1.3.6.1.4.1.3174.2.16.1.1.15
Threshold - minimum number of links required to activate bundle, for a mfrClass, classC. This variable can be set on a multilink bundle but not on a uni link bundle.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..28

mfrFrameSize		1.3.6.1.4.1.3174.2.16.1.1.16
The frame size for multi-link frame relay. This variable can be set on a multilink bundle but not on a uni link bundle.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	56..4096

mfrHelloTimer		1.3.6.1.4.1.3174.2.16.1.1.17
Hello timer in seconds. This variable can be set on a multilink bundle but not on a uni link bundle.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..180

mfrSegThreshold		1.3.6.1.4.1.3174.2.16.1.1.18
Segment threshold packet size in bytes. This variable can be set on a multilink bundle but not on a uni link bundle.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	56..4096

mfrDiffDelay		1.3.6.1.4.1.3174.2.16.1.1.19
Differential delay in milli seconds. This variable can be set on a multilink bundle but not on a uni link bundle.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	10..128

frPvcTable		1.3.6.1.4.1.3174.2.16.2
A list of Frame Relay PVC parameters.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		FrPvcTableEntry

frPvcTableEntry		1.3.6.1.4.1.3174.2.16.2.1
An entry in the frPvcTable
Status: current	Access: not-accessible
OBJECT-TYPE
	FrPvcTableEntry

frPvcDlci		1.3.6.1.4.1.3174.2.16.2.1.1
Data Link Connection Identifier of the PVC. The value ranges from 16 to 991. The Dlci is unique for a bundle but Dlci numbers can be reused across bundles.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	16..991

frPvcEnable		1.3.6.1.4.1.3174.2.16.2.1.2
Enables PVC for given interface name and DLCI number. By default PVC is disabled. Writing one(1) on this enables PVC.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

frPvcDescr		1.3.6.1.4.1.3174.2.16.2.1.3
Description for the configured PVC.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString

frPvcIpAddr		1.3.6.1.4.1.3174.2.16.2.1.4
IP address to be configured for the PVC. PVC IP subnet Mask variable should also be configured alongwith this variable. A set on this variable will be successful only if the subnetmask is also set in the same request. To unconfigure the Ip address, a set is issued with the value of the ip address as 0.0.0.0
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

frPvcIpSubnetMask		1.3.6.1.4.1.3174.2.16.2.1.5
Subnet mask to be configured alongwith PVC IP address. This variable should be configured alongwith PVC IP address.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

frPvcSrcForwardingPrimary		1.3.6.1.4.1.3174.2.16.2.1.6
Source forwarding IP address to be configured for PVC. To unconfigure the source forwarding address, a set is issued with the value of the address as 0.0.0.0. This is the primary source forwarding address
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

frPvcSrcForwardingSecondary		1.3.6.1.4.1.3174.2.16.2.1.7
Optional secondary source forwarding address configured for PVC, using alternate ethernet as backup. This variable should be configured along with the PVC primary source forwarding address. To unconfigure the secondary forwarding address, a set is issued with the value of the primary source forwarding address as 0.0.0.0, or a primary source forwarding address is set only, or both primary and secondary are set to 0.0.0.0
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

frPvcRemoteIpAddr		1.3.6.1.4.1.3174.2.16.2.1.8
Remote IP address to be mapped for PVC
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

frPvcPolicingEnable		1.3.6.1.4.1.3174.2.16.2.1.9
This variable is to disable/enable policing for PVC. Writing zero (0) on this disables policing for the PVC. By default policing is enabled.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	none(0), standard(2)

frPvcPolicingDe		1.3.6.1.4.1.3174.2.16.2.1.10
If enabled, received frames that exceed policing threshold, will be tagged with DE bit. This variable can be configured only if policing is enabled.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

frPvcPolicingCir		1.3.6.1.4.1.3174.2.16.2.1.11
Committed Information Rate( bits per second ) in receive direction for PVC. This variable can be configured only if policing is enabled.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

frPvcPolicingBc		1.3.6.1.4.1.3174.2.16.2.1.12
Committed Burst ( bits ) in receive direction for PVC. This variable can be configured only if policing is enabled.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

frPvcPolicingBe		1.3.6.1.4.1.3174.2.16.2.1.13
Excess burst ( bits ) in receive direction for PVC. This variable can be configured only if policing enabled.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

frPvcShapingCir		1.3.6.1.4.1.3174.2.16.2.1.14
The committed information rate (in bits per second) to be configured for the PVC.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

frPvcShapingBcMax		1.3.6.1.4.1.3174.2.16.2.1.15
The maximum committed burst (bits) to be configured for the PVC.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

frPvcShapingBcMin		1.3.6.1.4.1.3174.2.16.2.1.16
The minimum committed burst (bits) to be configured for the PVC.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

frPvcShapingBe		1.3.6.1.4.1.3174.2.16.2.1.17
The excess burst (bits) to be configured for the PVC.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

frPvcDlciForSwitching		1.3.6.1.4.1.3174.2.16.2.1.18
Data Link Connection Identifier of the PVC. The value for this variable ranges from 16 to 991. frPvcBundleNameForSwitching should be set with frPvcDlciForSwitching as an atomic set.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

frPvcBundleNameForSwitching		1.3.6.1.4.1.3174.2.16.2.1.19
The name of the bundle configured for Switching.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString

frPvcRowStatus		1.3.6.1.4.1.3174.2.16.2.1.20
To create a row set row status to a value CreateAndGo(4), indexed by bundle Id and the desired dlci number.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

frStatsTable		1.3.6.1.4.1.3174.2.16.3
The statistics objects for a frame-relay interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		FrStatsTableEntry

frStatsTableEntry		1.3.6.1.4.1.3174.2.16.3.1
An entry in the frStatsTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	FrStatsTableEntry

frStatsFramesRx		1.3.6.1.4.1.3174.2.16.3.1.1
Numbers of frames received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

frStatsInvFramesRx		1.3.6.1.4.1.3174.2.16.3.1.2
Number of invalid frames received
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

frStatsFECNsRx		1.3.6.1.4.1.3174.2.16.3.1.3
Number of frames received with FECN bit on
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

frStatsBECNsRx		1.3.6.1.4.1.3174.2.16.3.1.4
Number of frames received with BECN bit on.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

frStatsShortFramesRx		1.3.6.1.4.1.3174.2.16.3.1.5
Number of short frames received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

frStatsLongFramesRx		1.3.6.1.4.1.3174.2.16.3.1.6
Number of long frames received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

frStatsInvDLCIsRx		1.3.6.1.4.1.3174.2.16.3.1.7
Number of frames with invalid dlci received
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

frStatsUnknownDLCIsRx		1.3.6.1.4.1.3174.2.16.3.1.8
Number of frames with unknown dlci received
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

frStatsFramesTx		1.3.6.1.4.1.3174.2.16.3.1.9
Number of frames transmitted.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

frPvcStatsTable		1.3.6.1.4.1.3174.2.16.4
FR PVC Statistics Table
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		FrPvcStatsTableEntry

frPvcStatsTableEntry		1.3.6.1.4.1.3174.2.16.4.1
An entry in the FrPvcStats Table
Status: current	Access: not-accessible
OBJECT-TYPE
	FrPvcStatsTableEntry

frPvcStatsBytesRxLastBootOrClear		1.3.6.1.4.1.3174.2.16.4.1.1
Number of bytes received on a pvc since boot or last statistics clear.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

frPvcStatsBytesTxLastBootOrClear		1.3.6.1.4.1.3174.2.16.4.1.2
Number of bytes transmitted on a pvc since boot or last statistics clear.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

frPvcStatsPktsRxLastBootOrClear		1.3.6.1.4.1.3174.2.16.4.1.3
Number of packets received since boot or last statistics clear.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

frPvcStatsPktsTxLastBootOrClear		1.3.6.1.4.1.3174.2.16.4.1.4
Number of packets transmitted since boot or last statistics clear.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

frPvcStatsErrPktsRxLastBootOrClear		1.3.6.1.4.1.3174.2.16.4.1.5
Number of errored packets received since boot or last statistics clear.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

frPvcStatsUpDownStatesLastBootOrClear		1.3.6.1.4.1.3174.2.16.4.1.6
Number of times state(up or down) of the pvc changed in since boot or last statistics clear.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

frPvcStatsBytesRxLastFiveMins		1.3.6.1.4.1.3174.2.16.4.1.7
Number of bytes received in the last five minutes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

frPvcStatsBytesTxLastFiveMins		1.3.6.1.4.1.3174.2.16.4.1.8
Number of bytes transmitted in the last five minutes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

frPvcStatsPktsRxLastFiveMins		1.3.6.1.4.1.3174.2.16.4.1.9
Number of packets received in the last five minutes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

frPvcStatsPktsTxLastFiveMins		1.3.6.1.4.1.3174.2.16.4.1.10
Number of packets transmitted in the last five minutes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

frPvcStatsErrPktsRxLastFiveMins		1.3.6.1.4.1.3174.2.16.4.1.11
Number of errored packets received in the last five minutes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

frPvcStatsUpDownStatesLastFiveMins		1.3.6.1.4.1.3174.2.16.4.1.12
Number of times state(up or down) of the pvc changed in the last five minutes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

frAvcTable		1.3.6.1.4.1.3174.2.16.5
End-to-End MFR avc parameters are defined in this table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		FrAvcTableEntry

frAvcTableEntry		1.3.6.1.4.1.3174.2.16.5.1
avc parameter entries are listed in this table.
Status: current	Access: not-accessible
OBJECT-TYPE
	FrAvcTableEntry

frAvcId		1.3.6.1.4.1.3174.2.16.5.1.1
frAvcId is the identifier of an avc. To configure an avc, this parameter must be used as the index. This is assigned internally by the Tiara system. Whenever a row creation needs to occur in the avcTable, the frAvcId is entered as 65535.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER

frAvcDlci		1.3.6.1.4.1.3174.2.16.5.1.2
Data Link Connection Identifier of the avc. The value ranges from 16 to 1022. This number is unique across all the avcs created. Once set during creation, it can't be changed.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	16..991

frAvcName		1.3.6.1.4.1.3174.2.16.5.1.3
Name of the avc. To configure an avc, this parameter must be set. That is, a descriptive name should be given to an avc. The maximum length of an avc name is 8 characters. This parameter is set once during the creation of an avc. an avc can not be renamed.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(1..8)

frAvcDescr		1.3.6.1.4.1.3174.2.16.5.1.4
Brief description of the avc. The maximum length of this parameter is 25 characters.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(1..25)

frAvcIpAddr		1.3.6.1.4.1.3174.2.16.5.1.5
The avc's source IP address. This is one of the parameters required to set up IP multiplexing for an avc. Also the parameters avcIpAddr and avcSubnetMask have to be set together during the same request. To unconfigure the IP address, a set operation is performed with the value 0.0.0.0
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

frAvcIpSubnetMask		1.3.6.1.4.1.3174.2.16.5.1.6
This parameter represents the source subnet mask address. This is one of the parameters required to set up IP multiplexing for a avc. This parameter is set along with the avcIpAddr parameter during the same request.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

frAvcSrcForwardingPrimary		1.3.6.1.4.1.3174.2.16.5.1.7
The avc's destination IP address. This is one of the parameters required to set up IP multiplexing for an avc. This parameter can be configured when the avc has been configured for IP multiplexing. To unconfigure the source forwarding address, a set operation is performed with the value 0.0.0.0. This is the primary source forwarding address
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

frAvcSrcForwardingSecondary		1.3.6.1.4.1.3174.2.16.5.1.8
The avc's secondary or backup destination address. This address will be used only if the primary address uses an ethernet interface and failover is enabled on that interface and the interface goes down. The secondary source forwarding address is an optional parameter, it should be a gateway on the alternate ethernet This parameter is set along with the primary source forwarding address parameter. To unconfigure this parameter a set operation is performed with the value 0.0.0.0 for the primary address, or a primary address is set with no secondary, or both primary and secondary are set to 0.0.0.0
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

frAvcRemoteIpAddr		1.3.6.1.4.1.3174.2.16.5.1.9
Remote IP address to be mapped for the avc. If configured, the arp table is updated with this static entry and inverse arp request packets are no longer sent for this interface.To unconfigure this parameter, a set operation is performed with the value 0.0.0.0 .
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

frAvcClass		1.3.6.1.4.1.3174.2.16.5.1.10
classA -- avc is UP when at least 1 cvc is UP classB -- avc is UP when all cvcs are UP classC -- avc is UP when user-specified # of cvcs are UP classD -- avc is UP when user-specified min. CIR of each cvc is met classE -- avc is UP when user-specified min. CIR of the avc is met In the case of classC/D/E, frAvcClassThreshold should be configured along with avcClass in an atomic set operation.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	classA(1), classB(2), classC(3), classD(4), classE(5)

frAvcClassThreshold		1.3.6.1.4.1.3174.2.16.5.1.11
Threshold - minimum number of links required to activate bundle, for the avcClass 'classC'. For 'classD' or 'classE', the value will be in bits per second. For 'classA' and 'classB', this value will hold no significance.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

frAvcFragmentSize		1.3.6.1.4.1.3174.2.16.5.1.12
The frame size for multi-link frame relay End-to-End avc in bytes. This value defines the maximum size of any fragment that can be transmitted on any cvc. Frames larger than this size must be fragmented.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	56..4096

frAvcSegThreshold		1.3.6.1.4.1.3174.2.16.5.1.13
Segment threshold packet size in bytes. This value defines the minimum size of any fragment that can be transmitted on any cvc. Frames smaller than this size must not be fragmented.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	56..4096

frAvcSequence		1.3.6.1.4.1.3174.2.16.5.1.14
multilink frame relay sequence number length (short = 12 bits ; long = 24 bits.24 bit sequence space increases MFR header by 2 more bytes, but in those situations where the differential delay is high ( > 50 ms ), larger sequence numbers help reduce packet drops that can happen when short sequence numbers complete a cycle quickly.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	short(1), long(2)

frAvcNoOfCvcs		1.3.6.1.4.1.3174.2.16.5.1.15
Indicates the number of links configured in the avc.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

frAvcTotalBw		1.3.6.1.4.1.3174.2.16.5.1.16
Indicates the total bandwidth for this avc. The avc bandwidth is the aggregated band- widths of all the links assigned to a particular avc.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

frAvcRowStatus		1.3.6.1.4.1.3174.2.16.5.1.17
frAvcRowStatus is used to add/delete a row in the table. Adding or deleting a row corresponds to creating an avc or deleting an avc. In order to add a row to the avc table, a set on this parameter should be done with the value 4 (createAndGo) and frAvcId parameter set with the value of 65535. A request to create a row can be completed successfully only if a set on the avcRowStatus and a set on the avcName come in the same request. To delete a row this parameter has to be set with the value 6 (destroy).
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

frCvcTable		1.3.6.1.4.1.3174.2.16.6
End-to-End MFR cvc parameters are defined in this table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		FrCvcTableEntry

frCvcTableEntry		1.3.6.1.4.1.3174.2.16.6.1
cvc parameter entries are listed in this table.
Status: current	Access: not-accessible
OBJECT-TYPE
	FrCvcTableEntry

frCvcDlci		1.3.6.1.4.1.3174.2.16.6.1.1
Data Link Connection Identifier of the cvc. For End-to-End MFR avc, to assign a Constituent Virtual Circuit for aggregation, this CVC dlci is used in conjunction with the cvcBundleName as an atomic set.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	16..991

frCvcBundleName		1.3.6.1.4.1.3174.2.16.6.1.2
The name of the bundle of the CVC which needs to be added to the avc. This parameter is used in confunction with the frCvcDlci parameter as one atomic set operation.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString

frAvcStatsTable		1.3.6.1.4.1.3174.2.16.7
The statistics objects for a frame-relay interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AvcStatsTableEntry

frAvcStatsTableEntry		1.3.6.1.4.1.3174.2.16.7.1
An entry in the frAvcStatsTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	AvcStatsTableEntry

frAvcStatsBytesRxLastBootOrClear		1.3.6.1.4.1.3174.2.16.7.1.1
Number of bytes received on an avc since boot or last statistics clear.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

frAvcStatsBytesTxLastBootOrClear		1.3.6.1.4.1.3174.2.16.7.1.2
Number of bytes transmitted on an avc since boot or last statistics clear.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

frAvcStatsPktsRxLastBootOrClear		1.3.6.1.4.1.3174.2.16.7.1.3
Number of packets received since boot or last statistics clear.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

frAvcStatsPktsTxLastBootOrClear		1.3.6.1.4.1.3174.2.16.7.1.4
Number of packets transmitted since boot or last statistics clear.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

frAvcStatsErrPktsRxLastBootOrClear		1.3.6.1.4.1.3174.2.16.7.1.5
Number of errored packets received since boot or last statistics clear.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

frAvcStatsUpDownStatesLastBootOrClear		1.3.6.1.4.1.3174.2.16.7.1.6
Number of times state(up or down) of the avc changed in since boot or last statistics clear.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

frAvcStatsBytesRxLastFiveMins		1.3.6.1.4.1.3174.2.16.7.1.7
Number of bytes received in the last five minutes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

frAvcStatsBytesTxLastFiveMins		1.3.6.1.4.1.3174.2.16.7.1.8
Number of bytes transmitted in the last five minutes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

frAvcStatsPktsRxLastFiveMins		1.3.6.1.4.1.3174.2.16.7.1.9
Number of packets received in the last five minutes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

frAvcStatsPktsTxLastFiveMins		1.3.6.1.4.1.3174.2.16.7.1.10
Number of packets transmitted in the last five minutes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

frAvcStatsErrPktsRxLastFiveMins		1.3.6.1.4.1.3174.2.16.7.1.11
Number of errored packets received in the last five minutes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

frAvcStatsUpDownStatesLastFiveMins		1.3.6.1.4.1.3174.2.16.7.1.12
Number of times state(up or down) of the avc changed in the last five minutes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32