TCAv1-MIB

File: TCAv1-MIB.mib (6325 bytes)

Imported modules

RFC1213-MIB RFC-1212 RFC1155-SMI

Imported symbols

DisplayString OBJECT-TYPE TimeTicks
Counter enterprises

Defined Types

TcaEntry  
SEQUENCE    
  tcaIfIndex INTEGER 1..2147483647
  tcaIndex INTEGER 1..2147483647
  tcaObject OBJECT IDENTIFIER
  tcaObjectDesc DisplayString Size(0..255)
  tcaThreshold INTEGER 1..2147483647
  tcaSampleType INTEGER
  tcaCounts Counter
  tcaTimeStamp TimeTicks
  tcaTrapEnabler INTEGER

Defined Values

bellcore 1.3.6.1.4.1.148
OBJECT IDENTIFIER    

requirements 1.3.6.1.4.1.148.1
OBJECT IDENTIFIER    

tcaMIB 1.3.6.1.4.1.148.1.5
OBJECT IDENTIFIER    

tcaObjects 1.3.6.1.4.1.148.1.5.1
OBJECT IDENTIFIER    

tcaTable 1.3.6.1.4.1.148.1.5.1.1
The Threshold Crossing Alert table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TcaEntry

tcaEntry 1.3.6.1.4.1.148.1.5.1.1.1
An entry in the Threshold Crossing Alert table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TcaEntry  

tcaIfIndex 1.3.6.1.4.1.148.1.5.1.1.1.1
The value of this object is equal to MIB II's ifIndex value for this interface sublayer (ifEntry).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

tcaIndex 1.3.6.1.4.1.148.1.5.1.1.1.2
The value of this object is used as one of the indices for this table. It is a unique identifier for this row in the table for this interface (ifIndex). The value of this object can be from 1 to N, where N is the number of potential TCAs for this interface sublayer (ifEntry).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

tcaObject 1.3.6.1.4.1.148.1.5.1.1.1.3
The value of this object is the OBJECT IDENTIFIER of the counter object being thresholded. The counter objects being thresholded are defined in other MIB Modules.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

tcaObjectDesc 1.3.6.1.4.1.148.1.5.1.1.1.4
The value of this object is a description of the counter object being thresholded. For example, DS1 Coding Violations.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

tcaThreshold 1.3.6.1.4.1.148.1.5.1.1.1.5
The value of this object is the threshold value of the counter object being thresholded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

tcaSampleType 1.3.6.1.4.1.148.1.5.1.1.1.6
The value of this object is the sample type of the counter object being thresholded from the perspective of the CNM or XA-OM customer. All counters are thresholded over a 15-minute interval. However, over this 15-minute interval the threshold value may be an absolute value (e.g., used for interval counters) or a delta value (e.g., used for continuous counters). The intervals are measured locally at the agent, and are not visible to the manager. At the agent's local interval boundary, all threshold crossing measurements are reset to zero. (A counter value may cross the predefined threshold and a TCA is sent only once within a 15-minute interval.)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER intervalAbsoluteValue(1), intervalDeltaValue(2)  

tcaCounts 1.3.6.1.4.1.148.1.5.1.1.1.7
The value of this object is the number of times the threshold was crossed for this counter object, since sysUpTime was initialized or restarted. This counter is a continuous counter. It should be noted that as this object has a SYNTAX of Counter, that it does not have a defined initial value. However, it is recommended that this object be initialized to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tcaTimeStamp 1.3.6.1.4.1.148.1.5.1.1.1.8
The value of this object is equal to the value of MIB-II's sysUpTime object at which last (latest) threshold was crossed for this counter object. The value of this object is set to zero at (re)initialization.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

tcaTrapEnabler 1.3.6.1.4.1.148.1.5.1.1.1.9
Indicates whether an fyiTrap should be generated for this threshold crossing count (tcaObject). The physical layer counters' and gauges' (e.g., DS1, DS3, SONET, and PLCP) TCAs should have a default value of disabled(2). The SMDS service violations and higher layer protocol violations counters' TCAs should have a default value of enabled(1). A fyiTrap, when generated, shall have the following varBind list: tcaObject, tcaObjectDesc, tcaThreshold, and tcaTimeStamp.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

tcaConformance 1.3.6.1.4.1.148.1.5.2
OBJECT IDENTIFIER    

tcaGroups 1.3.6.1.4.1.148.1.5.2.1
OBJECT IDENTIFIER    

tcaCompliances 1.3.6.1.4.1.148.1.5.2.2
OBJECT IDENTIFIER    

tcaCompliance 1.3.6.1.4.1.148.1.5.2.2.1
OBJECT IDENTIFIER    

tcaGroup 1.3.6.1.4.1.148.1.5.2.1.1
OBJECT IDENTIFIER