TBOP-OPT-MIB

File: TBOP-OPT-MIB.mib (27495 bytes)

Imported modules

RFC1155-SMI

RFC-1212

Imported symbols

Counter

enterprises

OBJECT-TYPE

Defined Types

Counter16
INTEGER	0..65535

DisplayString
OCTET STRING

Cdx6500PPCTTBOPPortEntry
SEQUENCE
	cdx6500TBOPCfgPortNumber	INTEGER
	cdx6500TBOPCfgPortEIAOpt	INTEGER
	cdx6500TBOPCfgPortClockType	INTEGER
	cdx6500TBOPCfgPortClockSpeed	INTEGER
	cdx6500TBOPCfgPortTxCoding	INTEGER
	cdx6500TBOPCfgPortByteCount	INTEGER
	cdx6500TBOPCfgPortEIASigAction	DisplayString
	cdx6500TBOPCfgPortOptions	INTEGER
	cdx6500TBOPCfgPortRTSCTSDelay	INTEGER
	cdx6500TBOPCfgPortDcdOnDelay	INTEGER
	cdx6500TBOPCfgPortAutoCallMnem	DisplayString
	cdx6500TBOPCfgPortAutoCallTO	INTEGER
	cdx6500TBOPCfgPortMaxAutoTries	INTEGER
	cdx6500TBOPCfgPortSubAddress	DisplayString
	cdx6500TBOPCfgPortCUG	DisplayString
	cdx6500TBOPCfgPortEnableBill	INTEGER
	cdx6500TBOPCfgDimType	INTEGER
	cdx6500TBOPCfgPortMaxRxQSize	INTEGER
	cdx6500TBOPCfgPortMaxTxQSize	INTEGER
	cdx6500TBOPCfgPortChanT1E1-Conn	INTEGER
	cdx6500TBOPCfgPortIdleFlagCount	INTEGER
	cdx6500TBOPCfgPortElectricalInterfaceType	INTEGER
	cdx6500TBOPCfgPortV24ElectricalInterfaceOption	INTEGER
	cdx6500TBOPCfgPortHighSpeedElectricalInterfaceOption	INTEGER
	cdx6500TBOPCfgPortMaxFrameSize	INTEGER

Cdx6500PPSTTBOPPortEntry
SEQUENCE
	cdx6500TBOPStPortNumber	INTEGER
	cdx6500TBOPStPortStatus	DisplayString
	cdx6500TBOPStPortState	DisplayString
	cdx6500TBOPStPortSpeed	INTEGER
	cdx6500TBOPStOverrunErrors	Counter16
	cdx6500TBOPStUnderrunErrors	Counter16
	cdx6500TBOPStCRCErrors	Counter16
	cdx6500TBOPStPortRxChars	Counter
	cdx6500TBOPStPortRxCharsSec	INTEGER
	cdx6500TBOPStPortRxFrames	Counter
	cdx6500TBOPStPortRxFramesSec	INTEGER
	cdx6500TBOPStPortTxChars	Counter
	cdx6500TBOPStPortTxCharsSec	INTEGER
	cdx6500TBOPStPortTxFrames	Counter
	cdx6500TBOPStPortTxFramesSec	INTEGER
	cdx6500TBOPStPortRxUtil	INTEGER
	cdx6500TBOPStPortTxUtil	INTEGER
	cdx6500TBOPStPortFramesQueued	Counter

Defined Values

codex		1.3.6.1.4.1.449
OBJECT IDENTIFIER

cdxProductSpecific		1.3.6.1.4.1.449.2
OBJECT IDENTIFIER

cdx6500		1.3.6.1.4.1.449.2.1
OBJECT IDENTIFIER

cdx6500Configuration		1.3.6.1.4.1.449.2.1.2
OBJECT IDENTIFIER

cdx6500CfgProtocolGroup		1.3.6.1.4.1.449.2.1.2.1
OBJECT IDENTIFIER

cdx6500PCTPortProtocolGroup		1.3.6.1.4.1.449.2.1.2.1.1
OBJECT IDENTIFIER

cdx6500Statistics		1.3.6.1.4.1.449.2.1.3
OBJECT IDENTIFIER

cdx6500StatProtocolGroup		1.3.6.1.4.1.449.2.1.3.1
OBJECT IDENTIFIER

cdx6500PSTPortProtocolGroup		1.3.6.1.4.1.449.2.1.3.1.1
OBJECT IDENTIFIER

cdx6500Controls		1.3.6.1.4.1.449.2.1.4
OBJECT IDENTIFIER

cdx6500PPCTTBOPPortTable		1.3.6.1.4.1.449.2.1.2.1.1.7
This table contains TBOP Port configuration parameters.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Cdx6500PPCTTBOPPortEntry

cdx6500PPCTTBOPPortEntry		1.3.6.1.4.1.449.2.1.2.1.1.7.1
Each PortEntry contains the configuration parameters for one TBOP port.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Cdx6500PPCTTBOPPortEntry

cdx6500TBOPCfgPortNumber		1.3.6.1.4.1.449.2.1.2.1.1.7.1.1
Port number of the port being used by TBOP.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..54

cdx6500TBOPCfgPortEIAOpt		1.3.6.1.4.1.449.2.1.2.1.1.7.1.2
Specifies the control signal handshake and clocking required for a connection to be made to this port legal values are : simp - Simple, no control signals required. dtr - Dedicated, require the data terminal ready signal (DTR). dtrd - Same as DTR, except data set ready (DSR) drops between calls. dtrp - Same as DTR, except DSR/DCD/CTS are held low in the idle state. newvalSimp - same functionality as 'simp', new enumeration added for RFC1155 compatibility. nc - Parameter not configured.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	simp(0), dtr(1), dtrd(2), dtrp(8), newvalSimp(50), nc(100)

cdx6500TBOPCfgPortClockType		1.3.6.1.4.1.449.2.1.2.1.1.7.1.3
int - internal clock source. ext - external clock source. newval - same functionality as 'int', new enumeration added for RFC1155 compatibility. nc - parameter not configured.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	int(0), ext(1), newvalInt(50), nc(100)

cdx6500TBOPCfgPortClockSpeed		1.3.6.1.4.1.449.2.1.2.1.1.7.1.4
This is the speed of the port in bits per second, Clock Source = int. Legal Range=1200-384000. A value 0 indicates parameter not configured.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..384000

cdx6500TBOPCfgPortTxCoding		1.3.6.1.4.1.449.2.1.2.1.1.7.1.5
This is the data encoding used on the TBOP port. nrz - Non Return to Zero. nrzi - Non Return to Zero Inverted. newvalNrz - same functionality as 'nrz', new enumeration added for RFC1155 compatibility. nc - Parameter not configured.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	nrz(0), nrzi(1), newvalNrz(50), nc(100)

cdx6500TBOPCfgPortByteCount		1.3.6.1.4.1.449.2.1.2.1.1.7.1.6
This is the number of bytes collected from the line before data is forwarded. Legal values are : 128, 256, 384, 512, 640, 768, 896, 1036 and 1045. A value 0 indicates the parameter is not configured.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..1045

cdx6500TBOPCfgPortEIASigAction		1.3.6.1.4.1.449.2.1.2.1.1.7.1.7
This specifies the EIA signaling actions allowed on the port: NONE - none SWITCH - switched carrier CTS - raise CTS in response to RTS A combination of CTS and SWITCH may be specified by summing (e.g. SWITCH+CTS). NC - Indicates the parameter not configued.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(3..15)

cdx6500TBOPCfgPortOptions		1.3.6.1.4.1.449.2.1.2.1.1.7.1.8
Select options on this TBOP port as follows: none - port uses flag idle between frame exchanges and operates with as little as 2 idle flags between frames. marki - port uses mark idle between frame exchanges. (Required by System 36 - AS/400 series). cbr - for constant bit rate applications, the port operates with as little as 1 idle flag between frames. Also, if the outbound queue overflows, all frames on this queue will be purged. newvalNone - same functionality as 'none', new enumeration added for RFC1155 compatibility. nc - parameter not configured.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(0), marki(1), cbr(2), newvalNone(50), nc(100)

cdx6500TBOPCfgPortRTSCTSDelay		1.3.6.1.4.1.449.2.1.2.1.1.7.1.9
This specifies how long the TBOP port will delay CTS after RTS is raised when EIA Signaling Action = CTS. The delay is specified in 50 milliseconds units (1 = 50 milliseconds). Legal Range = 2-200. A value 0 indicates parameter not configured.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..200

cdx6500TBOPCfgPortDcdOnDelay		1.3.6.1.4.1.449.2.1.2.1.1.7.1.10
This specifies the length of time that DCD is held high before data is transmitted to the attached device. This is used when EIA Signaling Action = SWITCH. The delay is specified in milliseconds. Legal Range=1-255. A value 0 indicates parameter not configured.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

cdx6500TBOPCfgPortAutoCallMnem		1.3.6.1.4.1.449.2.1.2.1.1.7.1.11
This mnemonic name is used for auto calling.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..8)

cdx6500TBOPCfgPortAutoCallTO		1.3.6.1.4.1.449.2.1.2.1.1.7.1.12
This is the time interval in seconds between call attempts when auto calling.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	5..255

cdx6500TBOPCfgPortMaxAutoTries		1.3.6.1.4.1.449.2.1.2.1.1.7.1.13
This specifies the number of times the TBOP port will attempt to call. A value of 0 will allow unlimited attempts.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

cdx6500TBOPCfgPortSubAddress		1.3.6.1.4.1.449.2.1.2.1.1.7.1.14
Calls addressed to this node, with this subaddress will be routed to this TBOP port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..3)

cdx6500TBOPCfgPortCUG		1.3.6.1.4.1.449.2.1.2.1.1.7.1.15
The TBOP port may be a member of up to 8 different Closed User Groups. Each CUG membership must be a two digit number (except --) and separated by a comma. ( e.g. 12,34,56,09,02,03 ). -- - No CUG Membership 00-99 - CUG Membership
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(2..23)

cdx6500TBOPCfgPortEnableBill		1.3.6.1.4.1.449.2.1.2.1.1.7.1.16
This controls whether billing (accounting) records will be created for calls on this TBOP port. newvalOff - same functionality as 'off', new enumeration added for RFC1155 compatibility.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	off(0), on(1), newvalOff(50)

cdx6500TBOPCfgDimType		1.3.6.1.4.1.449.2.1.2.1.1.7.1.17
This controls the Interface Type.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	off(0), on(1), newvalOff(50)

cdx6500TBOPCfgPortMaxRxQSize		1.3.6.1.4.1.449.2.1.2.1.1.7.1.18
This parameter should be used with extreme caution. If using a non-default value, it is assumed you have discussed your application requirements with the manufacturer's support staff. A non-default value may result in excessive consumption of buffers, which can significantly impair the operation of all traffic over the node. This parameter defines the maximum number of frames which the inbound queue will contain. Frames are placed in this queue when they cannot be forwarded to the network link. If pipelining is enabled, this queue may contain frame segments. Therefore with pipelining enabled, this queue will typicaly contain more entries during network congestion. The default value of zero will result in a queue size between 32 and 100 depending on available memory. Legal Range=0,16-500. A value 501 indicates parameter not configured.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..501

cdx6500TBOPCfgPortMaxTxQSize		1.3.6.1.4.1.449.2.1.2.1.1.7.1.19
This defines the maximum number of frames which the outbound queue will contain. These frames are recombined frames, as they were originaly received by the remote TBOP port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	16..800

cdx6500TBOPCfgPortChanT1E1-Conn		1.3.6.1.4.1.449.2.1.2.1.1.7.1.20
This specifies whether a frame check sequence is generated for transmitted frames and whether the frame check sequence is stripped from received frames. It should be set to YES when connecting to a virtual TBOP port which maps to a T1 or E1 port. YES - Generate FCS for transmitted frames and strip FCS from received frames. NO - Don't generate FCS for transmitted frames or strip FCS from received frames. NC - Indicates the parameter not configured.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2), nc(100)

cdx6500TBOPCfgPortIdleFlagCount		1.3.6.1.4.1.449.2.1.2.1.1.7.1.21
The Minimum number of Idle flags between frames. If MARKi option is used, this should be greater or equal to 2 and this many number of Idle flags will be inserted between frames apart from Mark Flag(FF)s. Legal Range = 1-15. A value 0 indicates parameter not configured.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..15

cdx6500TBOPCfgPortElectricalInterfaceType		1.3.6.1.4.1.449.2.1.2.1.1.7.1.22
Specify the Electrical Interface Type: V.24 - V.24 Electrical Interface Type V.35 - V.35 Electrical Interface Type V.36 - V.36 Electrical Interface Type X.21 - X.21 Electrical Interface Type NONE - Electrically disabled
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	v24(1), v35(2), v36(3), x21(4), none(5)

cdx6500TBOPCfgPortV24ElectricalInterfaceOption		1.3.6.1.4.1.449.2.1.2.1.1.7.1.23
Specify the Pin 22 option: RI - V.24 uses Pin 22 for Ring Indicator output signal TM - V.24 uses Pin 22 for Test Mode input signal
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ri(1), tm(2)

cdx6500TBOPCfgPortHighSpeedElectricalInterfaceOption		1.3.6.1.4.1.449.2.1.2.1.1.7.1.24
Specify the cable type: NONE - V.35/V.36/X.21 DCE with straight through cable XOVER - V.35/V.36/X.21 DCE with crossover adapter cable
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), xover(2)

cdx6500TBOPCfgPortMaxFrameSize		1.3.6.1.4.1.449.2.1.2.1.1.7.1.25
This defines the maximum frame size which can be received by TBOP. The frame size is defined as the total number of octets in between flags. This parameter must be programmed as an even value. Legal Range = 1036-16384. A value 0 indicates the parameter not configured.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..16384

cdx6500PPSTTBOPPortTable		1.3.6.1.4.1.449.2.1.3.1.1.7
This table holds statistics items for TBOP ports
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Cdx6500PPSTTBOPPortEntry

cdx6500PPSTTBOPPortEntry		1.3.6.1.4.1.449.2.1.3.1.1.7.1
This entry holds the statistics items for one TBOP port.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Cdx6500PPSTTBOPPortEntry

cdx6500TBOPStPortNumber		1.3.6.1.4.1.449.2.1.3.1.1.7.1.1
The port number for this TBOP entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..54

cdx6500TBOPStPortStatus		1.3.6.1.4.1.449.2.1.3.1.1.7.1.2
Specifies current port Status. Up : Port is enabled by the CTP Disabled : Port is disabled by CTP Busy Out : The port is busy out by the CTP Down : Port is not enabled disables, or busy out by the CTP. Note : Port Status indicates Down state only if the TBOP port CMEM record entry portEnable gets corrupted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(2..8)

cdx6500TBOPStPortState		1.3.6.1.4.1.449.2.1.3.1.1.7.1.3
The EIA state of the port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..30)

cdx6500TBOPStPortSpeed		1.3.6.1.4.1.449.2.1.3.1.1.7.1.4
The measured port speed in bits per second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500TBOPStOverrunErrors		1.3.6.1.4.1.449.2.1.3.1.1.7.1.5
Total number of overrun errors counted by the I/O driver.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter16

cdx6500TBOPStUnderrunErrors		1.3.6.1.4.1.449.2.1.3.1.1.7.1.6
Total number of underrun errors counted by the I/O driver.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter16

cdx6500TBOPStCRCErrors		1.3.6.1.4.1.449.2.1.3.1.1.7.1.7
Total number of CRC errors counted by the I/O driver.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter16

cdx6500TBOPStPortRxChars		1.3.6.1.4.1.449.2.1.3.1.1.7.1.8
Total number of data characters received since last boot or statistics reset, header characters are not included.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500TBOPStPortRxCharsSec		1.3.6.1.4.1.449.2.1.3.1.1.7.1.9
The average number of characters received per second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500TBOPStPortRxFrames		1.3.6.1.4.1.449.2.1.3.1.1.7.1.10
Total number of SDLC frames received since last boot or statistices reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500TBOPStPortRxFramesSec		1.3.6.1.4.1.449.2.1.3.1.1.7.1.11
The average number of frames received per second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500TBOPStPortTxChars		1.3.6.1.4.1.449.2.1.3.1.1.7.1.12
Total number of data characters transmitted since last boot or statistics reset, header characters are not included.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500TBOPStPortTxCharsSec		1.3.6.1.4.1.449.2.1.3.1.1.7.1.13
The average number of characters transmitted per second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500TBOPStPortTxFrames		1.3.6.1.4.1.449.2.1.3.1.1.7.1.14
Total number of SDLC frames trnsmitted since last boot or statistics reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500TBOPStPortTxFramesSec		1.3.6.1.4.1.449.2.1.3.1.1.7.1.15
The average number of frames transmitted per second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500TBOPStPortRxUtil		1.3.6.1.4.1.449.2.1.3.1.1.7.1.16
Percentage of port receive bandwidth used.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

cdx6500TBOPStPortTxUtil		1.3.6.1.4.1.449.2.1.3.1.1.7.1.17
Percentage of port transmit bandwidth used.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

cdx6500TBOPStPortFramesQueued		1.3.6.1.4.1.449.2.1.3.1.1.7.1.18
Number of SDLC frames queued to the I/O drivers.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter