T1E1VG-OPT-MIB

File: T1E1VG-OPT-MIB.mib (43414 bytes)

Imported modules

RFC1155-SMI RFC-1212

Imported symbols

Counter Gauge enterprises
OBJECT-TYPE

Defined Types

DisplayString  
OCTET STRING    

Cdx6500T1E1VGEntry  
SEQUENCE    
  cdx6500T1E1VGCfgEntryNumber INTEGER
  cdx6500T1E1VGCfgInterfaceType DisplayString
  cdx6500T1E1VGCfgFormat INTEGER
  cdx6500T1E1VGCfgSwitchType INTEGER
  cdx6500T1E1VGCfgUserNetworkSide INTEGER
  cdx6500T1E1VGCfgDirectBchannel INTEGER
  cdx6500T1E1VGCfgBchRange DisplayString
  cdx6500T1E1VGCfgCallAddrReplace INTEGER
  cdx6500T1E1VGCfgIsdnQsigOpt DisplayString
  cdx6500T1E1VGCfgFilteredIE DisplayString
  cdx6500T1E1VGCfgReplIsdnQsig DisplayString
  cdx6500T1E1VGCfgCallPartyNumType INTEGER
  cdx6500T1E1VGCfgCallPartyNumPlan INTEGER
  cdx6500T1E1VGCfg1stChanPort INTEGER
  cdx6500T1E1VGCfg1stChanSlot DisplayString
  cdx6500T1E1VGCfg1stChanDS0Rate INTEGER
  cdx6500T1E1VGCfg2ndChanPort INTEGER
  cdx6500T1E1VGCfg2ndChanSlot DisplayString
  cdx6500T1E1VGCfg2ndChanDS0Rate INTEGER
  cdx6500T1E1VGCfg3rdChanPort INTEGER
  cdx6500T1E1VGCfg3rdChanSlot DisplayString
  cdx6500T1E1VGCfg3rdChanDS0Rate INTEGER
  cdx6500T1E1VGCfgLineFramingType INTEGER
  cdx6500T1E1VGCfgLineCoding INTEGER
  cdx6500T1E1VGCfgTransmitClock INTEGER
  cdx6500T1E1VGCfgLineImpedance INTEGER
  cdx6500T1E1VGCfgLineBuildOut INTEGER
  cdx6500T1E1VGCfgRecvSense INTEGER
  cdx6500T1E1VGCfgFacilityDataLink INTEGER
  cdx6500T1E1VGCfgV54RecvRLBK INTEGER
  cdx6500T1E1VGCfgThresholdValueLES INTEGER
  cdx6500T1E1VGCfgThresholdValueLCV INTEGER
  cdx6500T1E1VGCfgThresholdValuePCV INTEGER
  cdx6500T1E1VGCfgThresholdValueCSS INTEGER
  cdx6500T1E1VGCfgThresholdValueES INTEGER
  cdx6500T1E1VGCfgThresholdValueBES INTEGER
  cdx6500T1E1VGCfgThresholdValueSES INTEGER
  cdx6500T1E1VGCfgThresholdValueSEFS INTEGER
  cdx6500T1E1VGCfgThresholdValueUAS INTEGER
  cdx6500T1E1VGCfgBchNumScheme INTEGER

Cdx6500STT1E1VGEntry  
SEQUENCE    
  cdx6500T1E1VGStatIfNumber INTEGER
  cdx6500T1E1VGStatInterfaceType DisplayString
  cdx6500T1E1VGStatTimeSinceLastReset DisplayString
  cdx6500T1E1VGStatAlarmState DisplayString
  cdx6500T1E1VGStatChannelState DisplayString

Cdx6500T1E1VGStatTotal24HoursReportEntry  
SEQUENCE    
  cdx6500T1E1VGStatTotal24HoursReportIfNumber INTEGER
  cdx6500T1E1VGStatTotal24HoursReportLES Gauge
  cdx6500T1E1VGStatTotal24HoursReportLCV Gauge
  cdx6500T1E1VGStatTotal24HoursReportPCV Gauge
  cdx6500T1E1VGStatTotal24HoursReportCSS Gauge
  cdx6500T1E1VGStatTotal24HoursReportES Gauge
  cdx6500T1E1VGStatTotal24HoursReportBES Gauge
  cdx6500T1E1VGStatTotal24HoursReportSES Gauge
  cdx6500T1E1VGStatTotal24HoursReportSEFS Gauge
  cdx6500T1E1VGStatTotal24HoursReportUAS Gauge

Cdx6500T1E1VGStatCurrent15MinutesReportEntry  
SEQUENCE    
  cdx6500T1E1VGStatCurrent15MinutesReportIfNumber INTEGER
  cdx6500T1E1VGStatCurrent15MinutesReportTimeElapsed INTEGER
  cdx6500T1E1VGStatCurrent15MinutesReportLES Gauge
  cdx6500T1E1VGStatCurrent15MinutesReportLCV Gauge
  cdx6500T1E1VGStatCurrent15MinutesReportPCV Gauge
  cdx6500T1E1VGStatCurrent15MinutesReportCSS Gauge
  cdx6500T1E1VGStatCurrent15MinutesReportES Gauge
  cdx6500T1E1VGStatCurrent15MinutesReportBES Gauge
  cdx6500T1E1VGStatCurrent15MinutesReportSES Gauge
  cdx6500T1E1VGStatCurrent15MinutesReportSEFS Gauge
  cdx6500T1E1VgStatCurrent15MinutesReportUAS Gauge

Cdx6500T1StatT1ChannelStateEntry  
SEQUENCE    
  cdx6500T1E1VGStatT1ChannelStateIfNumber INTEGER
  cdx6500T1E1VGStatT1ChannelStateABCDNumber INTEGER
  cdx6500T1E1VGStatT1ChannelStateCurrentRxState DisplayString

Cdx6500T1E1VGStatE1ABCDStateEntry  
SEQUENCE    
  cdx6500T1E1VGStatE1ABCDStateIfNumber INTEGER
  cdx6500T1E1VGStatE1ABCDStateChannelNumber INTEGER
  cdx6500T1E1VGStatE1ABCDStateCurrentRxState DisplayString

Cdx6500T1E1VGContEntry  
SEQUENCE    
  t1e1vgContIfNumber INTEGER
  t1e1vgContIfBoot INTEGER

Defined Values

codex 10.1.449
OBJECT IDENTIFIER    

cdxProductSpecific 10.1.449.2
OBJECT IDENTIFIER    

cdx6500 10.1.449.2.1
OBJECT IDENTIFIER    

cdx6500Configuration 10.1.449.2.1.2
OBJECT IDENTIFIER    

cdx6500CfgGeneralGroup 10.1.449.2.1.2.2
OBJECT IDENTIFIER    

cdx6500Statistics 10.1.449.2.1.3
OBJECT IDENTIFIER    

cdx6500StatOtherStatsGroup 10.1.449.2.1.3.2
OBJECT IDENTIFIER    

cdx6500STT1E1VGGroup 10.1.449.2.1.3.2.15
OBJECT IDENTIFIER    

cdx6500Controls 10.1.449.2.1.4
OBJECT IDENTIFIER    

cdx6500T1E1VGTable 10.1.449.2.1.2.2.25
This table contains the T1E1VG Configuration parameters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cdx6500T1E1VGEntry

cdx6500T1E1VGEntry 10.1.449.2.1.2.2.25.1
A T1E1VG Table Entry. Each entry contains the configuration parameters for a single T1E1VG Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cdx6500T1E1VGEntry  

cdx6500T1E1VGCfgEntryNumber 10.1.449.2.1.2.2.25.1.1
Entry number of the T1E1VG Table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500T1E1VGCfgInterfaceType 10.1.449.2.1.2.2.25.1.2
This is a T1E1VG having interface type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500T1E1VGCfgFormat 10.1.449.2.1.2.2.25.1.3
This parameter is used to select the format of the T1E1VG interface. vg-format-frational :DS0's are predefined by the TELCO or the User vg-format-channelize :DS0 is predefined by the TELCO or the User vg-format-isdn :DS0 is defined by the ISDN (Q.931) D-Channel vg-format-ccs :DS0 is defined by the signalling channel (Voice).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vg-format-frational(1), vg-format-channelize(2), vg-format-isdn(3), vg-format-ccs(4)  

cdx6500T1E1VGCfgSwitchType 10.1.449.2.1.2.2.25.1.4
The ISDN switch type. This specifies the type of equipment to which this span is connected. The possible choices are: ni2 : National ISDN version 2 5ess : AT&T 5ESS Switch dms100 : Northern Telecom DMS-100 Switch ntt : Nippon Telephone and Telegraph switch (Japan) tso14 : AUSTEL Technical Standard 014 for Australia etsi : Euro ISDN PRI (NET5) qsig : ISDN QSIG PRI.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unspecified(1), ni2(2), ess5(3), dms100(4), ntt(5), tso14(6), etsi(7), qsig(8)  

cdx6500T1E1VGCfgUserNetworkSide 10.1.449.2.1.2.2.25.1.5
This parameter specifies whether the T1E1VG is emulating the network or user side of the ISDN network. user : The T1 or E1 port is emulating the user, ex. the T1 or E1 port is to be connected to an ISDN network. network : The T1 or E1 port is emulating the network, ex. the T1 or E1 port is to be connected to an ISDN PBX.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER user(1), network(2)  

cdx6500T1E1VGCfgDirectBchannel 10.1.449.2.1.2.2.25.1.6
This parameter specifies the direction of B-Channel assignment on outbound calls made from this port. high-to-low : B-Channels are selected starting with the highest numbered available channel. high-to-low : B-Channels are selected starting with the lowest numbered available channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER high-to-low(1), low-to-high(2)  

cdx6500T1E1VGCfgBchRange 10.1.449.2.1.2.2.25.1.7
Specify the B-Channel assignments that will be used for the ISDN/QSIG calls. Select Individual or Time Slot ranges, e.g. 1-3,10,13-15 will include Time Slots 1,2,3,10,13,14,15.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500T1E1VGCfgCallAddrReplace 10.1.449.2.1.2.2.25.1.8
This parameter is a PLACE HOLDER item.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1)  

cdx6500T1E1VGCfgIsdnQsigOpt 10.1.449.2.1.2.2.25.1.9
This parameter is a PLACE HOLDER item.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500T1E1VGCfgFilteredIE 10.1.449.2.1.2.2.25.1.10
This parameter is a PLACE HOLDER item.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500T1E1VGCfgReplIsdnQsig 10.1.449.2.1.2.2.25.1.11
This parameter is a PLACE HOLDER item.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500T1E1VGCfgCallPartyNumType 10.1.449.2.1.2.2.25.1.12
This is the Calling/Called Party Number Type as defined by ITU-T unknown - Unknown international - International number national - National number subscriber - Subscriber number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), international(2), national(3), subscriber(5)  

cdx6500T1E1VGCfgCallPartyNumPlan 10.1.449.2.1.2.2.25.1.13
This is the Calling/Called Party Number Plan as defined by ITU-T unknown - Unknown iSDN - ISDN numbering plan (E.164) telephony - Standard Telephone numbering plan private - Private numbering plan.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), isdn(2), telephony(3), private(10)  

cdx6500T1E1VGCfg1stChanPort 10.1.449.2.1.2.2.25.1.14
*Note that: This port must be configured as default.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500T1E1VGCfg1stChanSlot 10.1.449.2.1.2.2.25.1.15
Specify the Time Slot assignments, 1 to 24 for T1 or 1 to 31 for E1. Select Individual or Time Slot ranges, e.g. 1-3,10,13-15 will include Time Slots 1,2,3,10,13,14,15.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500T1E1VGCfg1stChanDS0Rate 10.1.449.2.1.2.2.25.1.16
Specify the DS0 Rate for T1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER rate-56k(1), rate-64k(2)  

cdx6500T1E1VGCfg2ndChanPort 10.1.449.2.1.2.2.25.1.17
0 : No Data activity on the Second FT1/FE1 Channel. Port No.: Associated to the Second FT1/FE1 Channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500T1E1VGCfg2ndChanSlot 10.1.449.2.1.2.2.25.1.18
Specify the Time Slot assignments, 1 to 24 for T1 or 1 to 31 for E1. Select Individual or Time Slot ranges, e.g. 1-3,10,13-15 will include Time Slots 1,2,3,10,13,14,15.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500T1E1VGCfg2ndChanDS0Rate 10.1.449.2.1.2.2.25.1.19
Specify the DS0 Rate for T1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER rate-56k(1), rate-64k(2)  

cdx6500T1E1VGCfg3rdChanPort 10.1.449.2.1.2.2.25.1.20
0 : No Data activity on the Third FT1/FE1 Channel. Port No.: Associated to the Third FT1/FE1 Channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500T1E1VGCfg3rdChanSlot 10.1.449.2.1.2.2.25.1.21
Specify the Time Slot assignments, 1 to 24 for T1 or 1 to 31 for E1. Select Individual or Time Slot ranges, e.g. 1-3,10,13-15 will include Time Slots 1,2,3,10,13,14,15.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500T1E1VGCfg3rdChanDS0Rate 10.1.449.2.1.2.2.25.1.22
Specify the DS0 Rate for T1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER rate-56k(1), rate-64k(2)  

cdx6500T1E1VGCfgLineFramingType 10.1.449.2.1.2.2.25.1.23
Indicate type of framing used by the DS1 circuit. esf : Extended Super Frame sf : Super Frame (Also known as D4 framing type) e1 : D2048S or D2048U e1-crc : D2048S with CRC e1-crc-febe: D2048S with CRC and Si=FEBE.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER sf(1), esf(2), e1(3), e1crc(4), e1crc-febe(5)  

cdx6500T1E1VGCfgLineCoding 10.1.449.2.1.2.2.25.1.24
Selects variety of zero suppression used on the T1 link. ami : Alternate Mark Inversion. b8zs : Bipolar 8 Zero Substitution. hdb3 : High Density Bipolar 3
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ami(1), b8zs(2), hdb3(3)  

cdx6500T1E1VGCfgTransmitClock 10.1.449.2.1.2.2.25.1.25
Selects the source of the transmit clock. int : Internal Oscillator. rec : Received Timing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER rec(1), int(2)  

cdx6500T1E1VGCfgLineImpedance 10.1.449.2.1.2.2.25.1.26
Selects the line impedance as 75 ohms or 120 ohms.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ohms-120(1), ohms-75(2)  

cdx6500T1E1VGCfgLineBuildOut 10.1.449.2.1.2.2.25.1.27
Select the Line Build Out to match the physical interface. For DSX interfaces, this value is based on cable 0 - 0ft to 133ft 1 - 134ft to 266ft 2 - 267ft to 399ft 3 - 400ft to 533ft 4 - 534ft to 655ft For DS1 interfaces, this value is based on the 0 - 0db 5 - -7.5db 6 - -15db 7 - -22.5db 4 - Not valid for DS1 interfaces
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500T1E1VGCfgRecvSense 10.1.449.2.1.2.2.25.1.28
Select HIGH (-36DB) if line is marginal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER low(1), high(2)  


cdx6500T1E1VGCfgV54RecvRLBK 10.1.449.2.1.2.2.25.1.30
enable : Respond to incoming V.54 loopback requests. disable: Do not respond to incoming V.54 loopback requests.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

cdx6500T1E1VGCfgThresholdValueLES 10.1.449.2.1.2.2.25.1.31
Threshold value of Line Errored Seconds (LESs) to report alarms on CTP when exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

cdx6500T1E1VGCfgThresholdValueLCV 10.1.449.2.1.2.2.25.1.32
Threshold value of Line Code Violations (LCVs) to report alarms on CTP when exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

cdx6500T1E1VGCfgThresholdValuePCV 10.1.449.2.1.2.2.25.1.33
Threshold value of Path Code Violations (PCVs) to report alarms on CTP when exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

cdx6500T1E1VGCfgThresholdValueCSS 10.1.449.2.1.2.2.25.1.34
Threshold value of Controlled Slip Seconds (CSSs) to report alarms on CTP when exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

cdx6500T1E1VGCfgThresholdValueES 10.1.449.2.1.2.2.25.1.35
Threshold value of Errored Seconds (ESs) to report alarms on CTP when exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

cdx6500T1E1VGCfgThresholdValueBES 10.1.449.2.1.2.2.25.1.36
Threshold value of Bursty Errored Seconds (BESs) to report alarms on CTP when exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

cdx6500T1E1VGCfgThresholdValueSES 10.1.449.2.1.2.2.25.1.37
Threshold value of Severely Errored Seconds (SESs) to report alarms on CTP when exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

cdx6500T1E1VGCfgThresholdValueSEFS 10.1.449.2.1.2.2.25.1.38
Threshold value of Severely Errored Framing Seconds (SEFSs) to report alarms on CTP when exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

cdx6500T1E1VGCfgThresholdValueUAS 10.1.449.2.1.2.2.25.1.39
Threshold value of Unavailable Seconds (UASs) to report alarms on CTP when exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

cdx6500T1E1VGCfgBchNumScheme 10.1.449.2.1.2.2.25.1.40
This parameter specifies the B-Channel numbering scheme used by the ISDN service provider. 1-31 : B-Channels are numbered 1 to 31. 1-30 : B-Channels are numbered 1 to 30.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER nb-1-30(1), nb-1-31(2)  

cdx6500STT1E1VGTable 10.1.449.2.1.3.2.15.1
This table holds statistics information for T1E1VG.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cdx6500STT1E1VGEntry

cdx6500STT1E1VGEntry 10.1.449.2.1.3.2.15.1.1
Each entry contains statistics information for one T1E1VG interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cdx6500STT1E1VGEntry  

cdx6500T1E1VGStatIfNumber 10.1.449.2.1.3.2.15.1.1.1
A T1E1VG Stat Table Interface Number. Each interface contains the configuration parameters for a single T1E1VG Table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500T1E1VGStatInterfaceType 10.1.449.2.1.3.2.15.1.1.2
This parameter indicates the type of interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500T1E1VGStatTimeSinceLastReset 10.1.449.2.1.3.2.15.1.1.3
Time since last reset has happened for the interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500T1E1VGStatAlarmState 10.1.449.2.1.3.2.15.1.1.4
Time since last reset has happened for the interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500T1E1VGStatChannelState 10.1.449.2.1.3.2.15.1.1.5
The status of or the interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500T1E1VGStatTotal24HoursReportTable 10.1.449.2.1.3.2.15.2
This table holds a report of the cumulative sum of the statistics for the previous 24 hour interval.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cdx6500T1E1VGStatTotal24HoursReportEntry

cdx6500T1E1VGStatTotal24HoursReportEntry 10.1.449.2.1.3.2.15.2.1
Each entry contains statistics information for one T1 port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cdx6500T1E1VGStatTotal24HoursReportEntry  

cdx6500T1E1VGStatTotal24HoursReportIfNumber 10.1.449.2.1.3.2.15.2.1.1
Interface number of the T1E1VG.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500T1E1VGStatTotal24HoursReportLES 10.1.449.2.1.3.2.15.2.1.2
The number of Line Errored Seconds (LESs) encountered by the T1E1VG interface in the previous 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cdx6500T1E1VGStatTotal24HoursReportLCV 10.1.449.2.1.3.2.15.2.1.3
The number of Line Code Violations (LCVs) encountered by the T1E1VG interface in the previous 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cdx6500T1E1VGStatTotal24HoursReportPCV 10.1.449.2.1.3.2.15.2.1.4
The number of Path Coding Violations (PCVs) encountered by the T1E1VG interface in the previous 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cdx6500T1E1VGStatTotal24HoursReportCSS 10.1.449.2.1.3.2.15.2.1.5
The number of Controlled Slip Seconds (CSSs) encountered by the T1E1VG interface in the previous 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cdx6500T1E1VGStatTotal24HoursReportES 10.1.449.2.1.3.2.15.2.1.6
The number of Errored Seconds (ESs) encountered by the T1E1VG interface in the previous 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cdx6500T1E1VGStatTotal24HoursReportBES 10.1.449.2.1.3.2.15.2.1.7
The number of Bursty Errored Seconds (BESs) encountered by the T1E1VG interface in the previous 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cdx6500T1E1VGStatTotal24HoursReportSES 10.1.449.2.1.3.2.15.2.1.8
The number of Severely Errored Seconds (SESs) encountered by the T1E1VG interface in the previous 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cdx6500T1E1VGStatTotal24HoursReportSEFS 10.1.449.2.1.3.2.15.2.1.9
The number of Severely Errored Framing Seconds (SEFSs) encountered by the T1E1VG interface in the previous 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cdx6500T1E1VGStatTotal24HoursReportUAS 10.1.449.2.1.3.2.15.2.1.10
The number of Unavailable Seconds (UASs) encountered by the T1E1VG interface in the previous 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cdx6500T1E1VGStatCurrent15MinutesReportTable 10.1.449.2.1.3.2.15.3
This table holds a report of the statistics for the current 15 minutes interval.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cdx6500T1E1VGStatCurrent15MinutesReportEntry

cdx6500T1E1VGStatCurrent15MinutesReportEntry 10.1.449.2.1.3.2.15.3.1
Each entry contains statistics information for one T1E1VG Interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cdx6500T1E1VGStatCurrent15MinutesReportEntry  

cdx6500T1E1VGStatCurrent15MinutesReportIfNumber 10.1.449.2.1.3.2.15.3.1.1
Interface number of the T1E1VG.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500T1E1VGStatCurrent15MinutesReportTimeElapsed 10.1.449.2.1.3.2.15.3.1.2
The time that has elapsed since the beginning of the current 15 minutes interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500T1E1VGStatCurrent15MinutesReportLES 10.1.449.2.1.3.2.15.3.1.3
The number of Line Errored Seconds (LESs) encountered by the T1E1VG interface in the current 15 minute interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cdx6500T1E1VGStatCurrent15MinutesReportLCV 10.1.449.2.1.3.2.15.3.1.4
The number of Line Code Violations (LCVs) encountered by the T1E1VG interface in the current 15 minute interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cdx6500T1E1VGStatCurrent15MinutesReportPCV 10.1.449.2.1.3.2.15.3.1.5
The number of Path Coding Violations (PCVs) encountered by the T1E1VG interface in the current 15 minute interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cdx6500T1E1VGStatCurrent15MinutesReportCSS 10.1.449.2.1.3.2.15.3.1.6
The number of Controlled Slip Seconds (CSSs) encountered by the T1E1VG interface in the current 15 minute interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cdx6500T1E1VGStatCurrent15MinutesReportES 10.1.449.2.1.3.2.15.3.1.7
The number of Errored Seconds (ESs) encountered by the T1E1VG interface in the current 15 minute interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cdx6500T1E1VGStatCurrent15MinutesReportBES 10.1.449.2.1.3.2.15.3.1.8
The number of Bursty Errored Seconds (BESs) encountered by the T1E1VG interface in the current 15 minute interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cdx6500T1E1VGStatCurrent15MinutesReportSES 10.1.449.2.1.3.2.15.3.1.9
The number of Severely Errored Seconds (SESs) encountered by the T1E1VG interface in the current 15 minute interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cdx6500T1E1VGStatCurrent15MinutesReportSEFS 10.1.449.2.1.3.2.15.3.1.10
The number of Severely Errored Framing Seconds (SEFSs) encountered by the T1E1VG interface in the current 15 minute interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cdx6500T1E1VGStatCurrent15MinutesReportUAS 10.1.449.2.1.3.2.15.3.1.11
The number of Unavailable Seconds (UASs) encountered by the T1E1VG interface in the current 15 minute interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cdx6500T1E1VGStatT1ChannelStateTable 10.1.449.2.1.3.2.15.4
The Channel State Table contains the current RX Channel state of the Configured DS0 Channels.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cdx6500T1StatT1ChannelStateEntry

cdx6500T1E1VGStatT1ChannelStateEntry 10.1.449.2.1.3.2.15.4.1
An Entry in the ABCD State Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cdx6500T1StatT1ChannelStateEntry  

cdx6500T1E1VGStatT1ChannelStateIfNumber 10.1.449.2.1.3.2.15.4.1.1
Interface number of the configured T1 channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500T1E1VGStatT1ChannelStateABCDNumber 10.1.449.2.1.3.2.15.4.1.2
ABCD number of the configured T1 channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..24  

cdx6500T1E1VGStatT1ChannelStateCurrentRxState 10.1.449.2.1.3.2.15.4.1.3
Current RX Channel state of the configured T1 channels.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500T1E1VGStatE1ABCDStateTable 10.1.449.2.1.3.2.15.5
The ABCD State Table contains the current RX ABCD state of the Configured DS0 Channels.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cdx6500T1E1VGStatE1ABCDStateEntry

cdx6500T1E1VGStatE1ABCDStateEntry 10.1.449.2.1.3.2.15.5.1
An Entry in the ABCD State Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cdx6500T1E1VGStatE1ABCDStateEntry  

cdx6500T1E1VGStatE1ABCDStateIfNumber 10.1.449.2.1.3.2.15.5.1.1
Interface number of the configured E1 channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500T1E1VGStatE1ABCDStateChannelNumber 10.1.449.2.1.3.2.15.5.1.2
Channel number of the configured E1 channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..30  

cdx6500T1E1VGStatE1ABCDStateCurrentRxState 10.1.449.2.1.3.2.15.5.1.3
Current RX ABCD state of the configured E1 channels.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500ContT1E1VGTable 10.1.449.2.1.4.19
OBJECT IDENTIFIER    

cdx6500T1E1VGContEntry 10.1.449.2.1.4.19.1
Each control applies to a single T1E1VG Interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cdx6500T1E1VGContEntry  

t1e1vgContIfNumber 10.1.449.2.1.4.19.1.1
Interface number of the T1E1VG.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

t1e1vgContIfBoot 10.1.449.2.1.4.19.1.2
Boot operations for the specified T1E1VG. boot : Boots the T1E1VG Interface noboot : Do not Boots the T1E1VG Interface.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER boot(1), noboot(2)  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor