T1E1TG-OPT-MIB

File: T1E1TG-OPT-MIB.mib (42436 bytes)

Imported modules

RFC1155-SMI RFC-1212

Imported symbols

Counter Gauge enterprises
OBJECT-TYPE

Defined Types

DisplayString  
OCTET STRING    

Cdx6500PCTT1E1TGEntry  
SEQUENCE    
  cdx6500T1E1TGCfgPortNumber INTEGER
  cdx6500T1E1TGCfgInterfaceType DisplayString
  cdx6500T1E1TGCfgFormat INTEGER
  cdx6500T1E1TGCfgSwitchType INTEGER
  cdx6500T1E1TGCfgUserNetworkSide INTEGER
  cdx6500T1E1TGCfgDirectBchannel INTEGER
  cdx6500T1E1TGCfgBchNumScheme INTEGER
  cdx6500T1E1TGCfgBchRange DisplayString
  cdx6500T1E1TGCfgCallAddrReplace DisplayString
  cdx6500T1E1TGCfgIsdnQsigOpt DisplayString
  cdx6500T1E1TGCfgFilteredIE DisplayString
  cdx6500T1E1TGCfgReplIsdnQsig DisplayString
  cdx6500T1E1TGCfgCallPartyNumType INTEGER
  cdx6500T1E1TGCfgCallPartyNumPlan INTEGER
  cdx6500T1E1TGCfgLineFramingType INTEGER
  cdx6500T1E1TGCfgLineCoding INTEGER
  cdx6500T1E1TGCfgClockPriority INTEGER
  cdx6500T1E1TGCfgLineImpedance INTEGER
  cdx6500T1E1TGCfgLineBuildOut INTEGER
  cdx6500T1E1TGCfgRecvSense INTEGER
  cdx6500T1E1TGCfgFacilityDataLink INTEGER
  cdx6500T1E1TGCfgV54RecvRLBK INTEGER
  cdx6500T1E1TGCfgThresholdValueLES INTEGER
  cdx6500T1E1TGCfgThresholdValueLCV INTEGER
  cdx6500T1E1TGCfgThresholdValuePCV INTEGER
  cdx6500T1E1TGCfgThresholdValueCSS INTEGER
  cdx6500T1E1TGCfgThresholdValueES INTEGER
  cdx6500T1E1TGCfgThresholdValueBES INTEGER
  cdx6500T1E1TGCfgThresholdValueSES INTEGER
  cdx6500T1E1TGCfgThresholdValueSEFS INTEGER
  cdx6500T1E1TGCfgThresholdValueUAS INTEGER

Cdx6500PSTT1E1TGEntry  
SEQUENCE    
  cdx6500T1E1TGStatPortNumber INTEGER
  cdx6500T1E1TGStatInterfaceType DisplayString
  cdx6500T1E1TGStatTimeSinceLastReset DisplayString
  cdx6500T1E1TGStatAlarmState DisplayString

Cdx6500PSTT1E1TGStatTotal24HoursReportEntry  
SEQUENCE    
  cdx6500T1E1TGStatTotal24HoursReportPortNumber INTEGER
  cdx6500T1E1TGStatTotal24HoursReportLES Gauge
  cdx6500T1E1TGStatTotal24HoursReportLCV Gauge
  cdx6500T1E1TGStatTotal24HoursReportPCV Gauge
  cdx6500T1E1TGStatTotal24HoursReportCSS Gauge
  cdx6500T1E1TGStatTotal24HoursReportES Gauge
  cdx6500T1E1TGStatTotal24HoursReportBES Gauge
  cdx6500T1E1TGStatTotal24HoursReportSES Gauge
  cdx6500T1E1TGStatTotal24HoursReportSEFS Gauge
  cdx6500T1E1TGStatTotal24HoursReportUAS Gauge

Cdx6500PSTT1E1TGStatCurrent15MinutesReportEntry  
SEQUENCE    
  cdx6500T1E1TGStatCurrent15MinutesReportPortNumber INTEGER
  cdx6500T1E1TGStatCurrent15MinutesReportTimeElapsed INTEGER
  cdx6500T1E1TGStatCurrent15MinutesReportLES Gauge
  cdx6500T1E1TGStatCurrent15MinutesReportLCV Gauge
  cdx6500T1E1TGStatCurrent15MinutesReportPCV Gauge
  cdx6500T1E1TGStatCurrent15MinutesReportCSS Gauge
  cdx6500T1E1TGStatCurrent15MinutesReportES Gauge
  cdx6500T1E1TGStatCurrent15MinutesReportBES Gauge
  cdx6500T1E1TGStatCurrent15MinutesReportSES Gauge
  cdx6500T1E1TGStatCurrent15MinutesReportSEFS Gauge
  cdx6500T1E1VgStatCurrent15MinutesReportUAS Gauge

Cdx6500PSTT1E1TGStatIntervalReportEntry  
SEQUENCE    
  cdx6500T1E1TGStatIntervalReportPortNumber INTEGER
  cdx6500T1E1TGStatIntervalNumber INTEGER
  cdx6500T1E1TGStatIntervalReportLES Gauge
  cdx6500T1E1TGStatIntervalReportLCV Gauge
  cdx6500T1E1TGStatIntervalReportPCV Gauge
  cdx6500T1E1TGStatIntervalReportCSS Gauge
  cdx6500T1E1TGStatIntervalReportES Gauge
  cdx6500T1E1TGStatIntervalReportBES Gauge
  cdx6500T1E1TGStatIntervalReportSES Gauge
  cdx6500T1E1TGStatIntervalReportSEFS Gauge
  cdx6500T1E1VgStatIntervalReportUAS Gauge

Cdx6500T1E1TGContEntry  
SEQUENCE    
  t1e1tgContPortNumber INTEGER
  t1e1tgContPortBoot INTEGER

Defined Values

codex 10.1.449
OBJECT IDENTIFIER    

cdxProductSpecific 10.1.449.2
OBJECT IDENTIFIER    

cdx6500 10.1.449.2.1
OBJECT IDENTIFIER    

cdx6500Configuration 10.1.449.2.1.2
OBJECT IDENTIFIER    

cdx6500CfgProtocolGroup 10.1.449.2.1.2.1
OBJECT IDENTIFIER    

cdx6500CfgGeneralGroup 10.1.449.2.1.2.2
OBJECT IDENTIFIER    

cdx6500PCTPortProtocolGroup 10.1.449.2.1.2.1.1
OBJECT IDENTIFIER    

cdx6500Statistics 10.1.449.2.1.3
OBJECT IDENTIFIER    

cdx6500StatProtocolGroup 10.1.449.2.1.3.1
OBJECT IDENTIFIER    

cdx6500PSTPortProtocolGroup 10.1.449.2.1.3.1.1
OBJECT IDENTIFIER    

cdx6500PSTT1E1TGPortTable 10.1.449.2.1.3.1.1.35
OBJECT IDENTIFIER    

cdx6500Controls 10.1.449.2.1.4
OBJECT IDENTIFIER    

cdx6500PCTT1E1TGPortTable 10.1.449.2.1.2.1.1.34
This table contains the T1E1TGPort Configuration parameters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cdx6500PCTT1E1TGEntry

cdx6500PCTT1E1TGPortEntry 10.1.449.2.1.2.1.1.34.1
A T1E1TGPort Table Entry. Each entry contains the configuration parameters for a single T1E1TGPort Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cdx6500PCTT1E1TGEntry  

cdx6500T1E1TGCfgPortNumber 10.1.449.2.1.2.1.1.34.1.1
Port number of the T1E1TG Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500T1E1TGCfgInterfaceType 10.1.449.2.1.2.1.1.34.1.2
This is a T1E1TG having interface type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500T1E1TGCfgFormat 10.1.449.2.1.2.1.1.34.1.3
This parameter is used to select the format of the T1E1TG interface. vg-format-frational :DS0's are predefined by the TELCO or the User vg-format-channelize :DS0 is predefined by the TELCO or the User vg-format-isdn :DS0 is defined by the ISDN (Q.931) D-Channel vg-format-ccs :DS0 is defined by the signalling channel (Voice).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER vg-format-frational(1), vg-format-channelize(2), vg-format-isdn(3), vg-format-ccs(4)  

cdx6500T1E1TGCfgSwitchType 10.1.449.2.1.2.1.1.34.1.4
The ISDN switch type. This specifies the type of equipment to which this span is connected. The possible choices are: ni2 : National ISDN version 2 5ess : AT&T 5ESS Switch dms100 : Northern Telecom DMS-100 Switch ntt : Nippon Telephone and Telegraph switch (Japan) tso14 : AUSTEL Technical Standard 014 for Australia etsi : Euro ISDN PRI (NET5) qsig : ISDN QSIG PRI.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unspecified(1), ni2(2), ess5(3), dms100(4), ntt(5), tso14(6), etsi(7), qsig(8)  

cdx6500T1E1TGCfgUserNetworkSide 10.1.449.2.1.2.1.1.34.1.5
This parameter specifies whether the T1E1TG is emulating the network or user side of the ISDN network. user : The T1 or E1 port is emulating the user, ex. the T1 or E1 port is to be connected to an ISDN network. network : The T1 or E1 port is emulating the network, ex. the T1 or E1 port is to be connected to an ISDN PBX.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER user(1), network(2)  

cdx6500T1E1TGCfgDirectBchannel 10.1.449.2.1.2.1.1.34.1.6
This parameter specifies the direction of B-Channel assignment on outbound calls made from this port. high-to-low : B-Channels are selected starting with the highest numbered available channel. high-to-low : B-Channels are selected starting with the lowest numbered available channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER high-to-low(1), low-to-high(2)  

cdx6500T1E1TGCfgBchNumScheme 10.1.449.2.1.2.1.1.34.1.7
This parameter specifies the B-Channel numbering scheme used by the ISDN service provider. 1-31 : B-Channels are numbered 1 to 31. 1-30 : B-Channels are numbered 1 to 30.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER nb-1-30(1), nb-1-31(2)  

cdx6500T1E1TGCfgBchRange 10.1.449.2.1.2.1.1.34.1.8
Specify the B-Channel assignments that will be used for the ISDN/QSIG calls. Select Individual or Time Slot ranges, e.g. 1-3,10,13-15 will include Time Slots 1,2,3,10,13,14,15.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500T1E1TGCfgCallAddrReplace 10.1.449.2.1.2.1.1.34.1.9
Specifies the rules for Calling Number replacement for ISDN/QSIG voice calls. If the Calling Number is to be replaced, the new number comes from the Virtual Port's Local Subscriber Directory Number, specified in the Virtual Port Mapping Table. NONE - No replacement RX - For an incoming call replace the Calling Number TX - For an outgoing call replace the Calling Number RX-ONLY - For an incoming call replace the Calling Number only TX-ONLY - For an outgoing call replace the Calling Number only.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500T1E1TGCfgIsdnQsigOpt 10.1.449.2.1.2.1.1.34.1.10
This parameter is a PLACE HOLDER item.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500T1E1TGCfgFilteredIE 10.1.449.2.1.2.1.1.34.1.11
This parameter is a PLACE HOLDER item.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500T1E1TGCfgReplIsdnQsig 10.1.449.2.1.2.1.1.34.1.12
This parameter is a PLACE HOLDER item.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500T1E1TGCfgCallPartyNumType 10.1.449.2.1.2.1.1.34.1.13
This is the Calling/Called Party Number Type as defined by ITU-T unknown - Unknown international - International number national - National number subscriber - Subscriber number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), international(2), national(3), subscriber(5)  

cdx6500T1E1TGCfgCallPartyNumPlan 10.1.449.2.1.2.1.1.34.1.14
This is the Calling/Called Party Number Plan as defined by ITU-T unknown - Unknown iSDN - ISDN numbering plan (E.164) telephony - Standard Telephone numbering plan private - Private numbering plan.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), isdn(2), telephony(3), private(10)  

cdx6500T1E1TGCfgLineFramingType 10.1.449.2.1.2.1.1.34.1.15
Indicate type of framing used by the DS1 circuit. esf : Extended Super Frame sf : Super Frame (Also known as D4 framing type) e1 : D2048S or D2048U e1-crc : D2048S with CRC e1-crc-febe: D2048S with CRC and Si=FEBE.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER sf(1), esf(2), e1(3), e1crc(4), e1crc-febe(5)  

cdx6500T1E1TGCfgLineCoding 10.1.449.2.1.2.1.1.34.1.16
Selects variety of zero suppression used on the T1 link. ami : Alternate Mark Inversion. b8zs : Bipolar 8 Zero Substitution. hdb3 : High Density Bipolar 3
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ami(1), b8zs(2), hdb3(3)  

cdx6500T1E1TGCfgClockPriority 10.1.449.2.1.2.1.1.34.1.17
Priority of the received clock to become source of Group, Card or System clock. HIGH : High prority MEDIUM : Medium priority LOW : Low priority
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER high(1), medium(2), low(3)  

cdx6500T1E1TGCfgLineImpedance 10.1.449.2.1.2.1.1.34.1.18
Selects the line impedance as 75 ohms or 120 ohms.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ohms-120(1), ohms-75(2)  

cdx6500T1E1TGCfgLineBuildOut 10.1.449.2.1.2.1.1.34.1.19
Select the Line Build Out to match the physical interface. For DSX interfaces, this value is based on cable 0 - 0ft to 133ft 1 - 134ft to 266ft 2 - 267ft to 399ft 3 - 400ft to 533ft 4 - 534ft to 655ft For DS1 interfaces, this value is based on the 0 - 0db 5 - -7.5db 6 - -15db 7 - -22.5db 4 - Not valid for DS1 interfaces
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500T1E1TGCfgRecvSense 10.1.449.2.1.2.1.1.34.1.20
Select HIGH (-36DB) if line is marginal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER low(1), high(2)  


cdx6500T1E1TGCfgV54RecvRLBK 10.1.449.2.1.2.1.1.34.1.22
enable : Respond to incoming V.54 loopback requests. disable: Do not respond to incoming V.54 loopback requests.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

cdx6500T1E1TGCfgThresholdValueLES 10.1.449.2.1.2.1.1.34.1.23
Threshold value of Line Errored Seconds (LESs) to report alarms on CTP when exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

cdx6500T1E1TGCfgThresholdValueLCV 10.1.449.2.1.2.1.1.34.1.24
Threshold value of Line Code Violations (LCVs) to report alarms on CTP when exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

cdx6500T1E1TGCfgThresholdValuePCV 10.1.449.2.1.2.1.1.34.1.25
Threshold value of Path Code Violations (PCVs) to report alarms on CTP when exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

cdx6500T1E1TGCfgThresholdValueCSS 10.1.449.2.1.2.1.1.34.1.26
Threshold value of Controlled Slip Seconds (CSSs) to report alarms on CTP when exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

cdx6500T1E1TGCfgThresholdValueES 10.1.449.2.1.2.1.1.34.1.27
Threshold value of Errored Seconds (ESs) to report alarms on CTP when exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

cdx6500T1E1TGCfgThresholdValueBES 10.1.449.2.1.2.1.1.34.1.28
Threshold value of Bursty Errored Seconds (BESs) to report alarms on CTP when exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

cdx6500T1E1TGCfgThresholdValueSES 10.1.449.2.1.2.1.1.34.1.29
Threshold value of Severely Errored Seconds (SESs) to report alarms on CTP when exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

cdx6500T1E1TGCfgThresholdValueSEFS 10.1.449.2.1.2.1.1.34.1.30
Threshold value of Severely Errored Framing Seconds (SEFSs) to report alarms on CTP when exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

cdx6500T1E1TGCfgThresholdValueUAS 10.1.449.2.1.2.1.1.34.1.31
Threshold value of Unavailable Seconds (UASs) to report alarms on CTP when exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

cdx6500PSTT1E1TGTable 10.1.449.2.1.3.1.1.35.1
This table holds statistics information for T1E1TG.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cdx6500PSTT1E1TGEntry

cdx6500PSTT1E1TGEntry 10.1.449.2.1.3.1.1.35.1.1
Each entry contains statistics information for one T1E1TG interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cdx6500PSTT1E1TGEntry  

cdx6500T1E1TGStatPortNumber 10.1.449.2.1.3.1.1.35.1.1.1
A T1E1TG Stat Table Port Number. Each Port contains the configuration parameters for a single T1E1TG Table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500T1E1TGStatInterfaceType 10.1.449.2.1.3.1.1.35.1.1.2
This parameter indicates the type of interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500T1E1TGStatTimeSinceLastReset 10.1.449.2.1.3.1.1.35.1.1.3
Time since last reset has happened for the interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500T1E1TGStatAlarmState 10.1.449.2.1.3.1.1.35.1.1.4
Time since last reset has happened for the interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500PSTT1E1TGStatTotal24HoursReportTable 10.1.449.2.1.3.1.1.35.2
This table holds a report of the cumulative sum of the statistics for the previous 24 hour interval.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cdx6500PSTT1E1TGStatTotal24HoursReportEntry

cdx6500PSTT1E1TGStatTotal24HoursReportEntry 10.1.449.2.1.3.1.1.35.2.1
Each entry contains statistics information for one T1 port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cdx6500PSTT1E1TGStatTotal24HoursReportEntry  

cdx6500T1E1TGStatTotal24HoursReportPortNumber 10.1.449.2.1.3.1.1.35.2.1.1
Port number of the T1E1TG.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500T1E1TGStatTotal24HoursReportLES 10.1.449.2.1.3.1.1.35.2.1.2
The number of Line Errored Seconds (LESs) encountered by the T1E1TG interface in the previous 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cdx6500T1E1TGStatTotal24HoursReportLCV 10.1.449.2.1.3.1.1.35.2.1.3
The number of Line Code Violations (LCVs) encountered by the T1E1TG interface in the previous 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cdx6500T1E1TGStatTotal24HoursReportPCV 10.1.449.2.1.3.1.1.35.2.1.4
The number of Path Coding Violations (PCVs) encountered by the T1E1TG interface in the previous 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cdx6500T1E1TGStatTotal24HoursReportCSS 10.1.449.2.1.3.1.1.35.2.1.5
The number of Controlled Slip Seconds (CSSs) encountered by the T1E1TG interface in the previous 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cdx6500T1E1TGStatTotal24HoursReportES 10.1.449.2.1.3.1.1.35.2.1.6
The number of Errored Seconds (ESs) encountered by the T1E1TG interface in the previous 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cdx6500T1E1TGStatTotal24HoursReportBES 10.1.449.2.1.3.1.1.35.2.1.7
The number of Bursty Errored Seconds (BESs) encountered by the T1E1TG interface in the previous 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cdx6500T1E1TGStatTotal24HoursReportSES 10.1.449.2.1.3.1.1.35.2.1.8
The number of Severely Errored Seconds (SESs) encountered by the T1E1TG interface in the previous 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cdx6500T1E1TGStatTotal24HoursReportSEFS 10.1.449.2.1.3.1.1.35.2.1.9
The number of Severely Errored Framing Seconds (SEFSs) encountered by the T1E1TG interface in the previous 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cdx6500T1E1TGStatTotal24HoursReportUAS 10.1.449.2.1.3.1.1.35.2.1.10
The number of Unavailable Seconds (UASs) encountered by the T1E1TG interface in the previous 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cdx6500PSTT1E1TGStatCurrent15MinutesReportTable 10.1.449.2.1.3.1.1.35.3
This table holds a report of the statistics for the current 15 minutes interval.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cdx6500PSTT1E1TGStatCurrent15MinutesReportEntry

cdx6500PSTT1E1TGStatCurrent15MinutesReportEntry 10.1.449.2.1.3.1.1.35.3.1
Each entry contains statistics information for one T1E1TG Interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cdx6500PSTT1E1TGStatCurrent15MinutesReportEntry  

cdx6500T1E1TGStatCurrent15MinutesReportPortNumber 10.1.449.2.1.3.1.1.35.3.1.1
Port number of the T1E1TG.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500T1E1TGStatCurrent15MinutesReportTimeElapsed 10.1.449.2.1.3.1.1.35.3.1.2
The time that has elapsed since the beginning of the current 15 minutes interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500T1E1TGStatCurrent15MinutesReportLES 10.1.449.2.1.3.1.1.35.3.1.3
The number of Line Errored Seconds (LESs) encountered by the T1E1TG interface in the current 15 minute interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cdx6500T1E1TGStatCurrent15MinutesReportLCV 10.1.449.2.1.3.1.1.35.3.1.4
The number of Line Code Violations (LCVs) encountered by the T1E1TG interface in the current 15 minute interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cdx6500T1E1TGStatCurrent15MinutesReportPCV 10.1.449.2.1.3.1.1.35.3.1.5
The number of Path Coding Violations (PCVs) encountered by the T1E1TG interface in the current 15 minute interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cdx6500T1E1TGStatCurrent15MinutesReportCSS 10.1.449.2.1.3.1.1.35.3.1.6
The number of Controlled Slip Seconds (CSSs) encountered by the T1E1TG interface in the current 15 minute interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cdx6500T1E1TGStatCurrent15MinutesReportES 10.1.449.2.1.3.1.1.35.3.1.7
The number of Errored Seconds (ESs) encountered by the T1E1TG interface in the current 15 minute interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cdx6500T1E1TGStatCurrent15MinutesReportBES 10.1.449.2.1.3.1.1.35.3.1.8
The number of Bursty Errored Seconds (BESs) encountered by the T1E1TG interface in the current 15 minute interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cdx6500T1E1TGStatCurrent15MinutesReportSES 10.1.449.2.1.3.1.1.35.3.1.9
The number of Severely Errored Seconds (SESs) encountered by the T1E1TG interface in the current 15 minute interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cdx6500T1E1TGStatCurrent15MinutesReportSEFS 10.1.449.2.1.3.1.1.35.3.1.10
The number of Severely Errored Framing Seconds (SEFSs) encountered by the T1E1TG interface in the current 15 minute interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cdx6500T1E1TGStatCurrent15MinutesReportUAS 10.1.449.2.1.3.1.1.35.3.1.11
The number of Unavailable Seconds (UASs) encountered by the T1E1TG interface in the current 15 minute interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cdx6500PSTT1E1TGStatIntervalReportTable 10.1.449.2.1.3.1.1.35.4
The T1E1 Interval Table contains various statistics collected by each T1E1 Interface over the previous 24 hours of operation. The past 24 hours are broken into 96 completed 15 minute intervals.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cdx6500PSTT1E1TGStatIntervalReportEntry

cdx6500PSTT1E1TGStatIntervalReportEntry 10.1.449.2.1.3.1.1.35.4.1
Each entry contains statistics information for one T1E1TG Interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cdx6500PSTT1E1TGStatIntervalReportEntry  

cdx6500T1E1TGStatIntervalReportPortNumber 10.1.449.2.1.3.1.1.35.4.1.1
The index which identifies the Port number of the T1E1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500T1E1TGStatIntervalNumber 10.1.449.2.1.3.1.1.35.4.1.2
A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..96  

cdx6500T1E1TGStatIntervalReportLES 10.1.449.2.1.3.1.1.35.4.1.3
The number of Line Errored Seconds (LESs) encountered by the T1E1TG interface in the 15 minute interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cdx6500T1E1TGStatIntervalReportLCV 10.1.449.2.1.3.1.1.35.4.1.4
The number of Line Code Violations (LCVs) encountered by the T1E1TG interface in the 15 minute interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cdx6500T1E1TGStatIntervalReportPCV 10.1.449.2.1.3.1.1.35.4.1.5
The number of Path Coding Violations (PCVs) encountered by the T1E1TG interface in the 15 minute interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cdx6500T1E1TGStatIntervalReportCSS 10.1.449.2.1.3.1.1.35.4.1.6
The number of Controlled Slip Seconds (CSSs) encountered by the T1E1TG interface in the 15 minute interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cdx6500T1E1TGStatIntervalReportES 10.1.449.2.1.3.1.1.35.4.1.7
The number of Errored Seconds (ESs) encountered by the T1E1TG interface in the 15 minute interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cdx6500T1E1TGStatIntervalReportBES 10.1.449.2.1.3.1.1.35.4.1.8
The number of Bursty Errored Seconds (BESs) encountered by the T1E1TG interface in the 15 minute interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cdx6500T1E1TGStatIntervalReportSES 10.1.449.2.1.3.1.1.35.4.1.9
The number of Severely Errored Seconds (SESs) encountered by the T1E1TG interface in the 15 minute interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cdx6500T1E1TGStatIntervalReportSEFS 10.1.449.2.1.3.1.1.35.4.1.10
The number of Severely Errored Framing Seconds (SEFSs) encountered by the T1E1TG interface in the 15 minute interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cdx6500T1E1TGStatIntervalReportUAS 10.1.449.2.1.3.1.1.35.4.1.11
The number of Unavailable Seconds (UASs) encountered by the T1E1TG interface in the 15 minute interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cdx6500ContT1E1TGTable 10.1.449.2.1.4.22
OBJECT IDENTIFIER    

cdx6500T1E1TGContEntry 10.1.449.2.1.4.22.1
Each control applies to a single T1E1TG Port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cdx6500T1E1TGContEntry  

t1e1tgContPortNumber 10.1.449.2.1.4.22.1.1
Port number of the T1E1TG.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

t1e1tgContPortBoot 10.1.449.2.1.4.22.1.2
Boot operations for the specified T1E1TG Port. boot : Boots the T1E1TG Port noboot : Do not Boots the T1E1TG Port.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER boot(1), noboot(2)  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor