T1E1-OPT-MIB

File: T1E1-OPT-MIB.mib (12616 bytes)

Imported modules

RFC1155-SMI RFC-1212

Imported symbols

enterprises OBJECT-TYPE

Defined Types

DisplayString  
OCTET STRING    

PhysicalPortNumber  
INTEGER 49..50    

VirtualPortNumber  
INTEGER 100..255    

Cdx6500VPCTT1E1PortEntry  
SEQUENCE    
  cdx6500VPCTT1E1CfgPortNumber INTEGER
  cdx6500VPCTT1E1CfgPortType INTEGER
  cdx6500VPCTT1E1CfgPhyPortNumber INTEGER
  cdx6500VPCTT1E1CfgTimeSlotNumber INTEGER
  cdx6500VPCTT1E1CfgDS0Rate INTEGER
  cdx6500VPCTT1E1CfgAggregateType INTEGER
  cdx6500VPCTT1E1CfgSOPortNumber INTEGER
  cdx6500VPCTT1E1CfgBChannel INTEGER
  cdx6500VPCTT1E1CfgLocalSubscriberAddress DisplayString
  cdx6500VPCTT1E1CfgNetSpecCall INTEGER
  cdx6500VPCTT1E1CfgPartyNumberType INTEGER
  cdx6500VPCTT1E1CfgPartyNumberPlan INTEGER
  cdx6500VPCTT1E1CfgIndex INTEGER

Defined Values

codex 10.1.449
OBJECT IDENTIFIER    

cdxProductSpecific 10.1.449.2
OBJECT IDENTIFIER    

cdx6500 10.1.449.2.1
OBJECT IDENTIFIER    

cdx6500Configuration 10.1.449.2.1.2
OBJECT IDENTIFIER    

cdx6500CfgProtocolGroup 10.1.449.2.1.2.1
OBJECT IDENTIFIER    

cdx6500PCTPortProtocolGroup 10.1.449.2.1.2.1.1
OBJECT IDENTIFIER    

cdx6500PCTT1E1PortTable 10.1.449.2.1.2.1.1.24
OBJECT IDENTIFIER    

cdx6500Statistics 10.1.449.2.1.3
OBJECT IDENTIFIER    

cdx6500StatProtocolGroup 10.1.449.2.1.3.1
OBJECT IDENTIFIER    

cdx6500PSTPortProtocolGroup 10.1.449.2.1.3.1.1
OBJECT IDENTIFIER    

cdx6500PSTT1E1PortTable 10.1.449.2.1.3.1.1.25
OBJECT IDENTIFIER    

cdx6500VPCTT1E1PortTable 10.1.449.2.1.2.1.1.24.3
This table contains the T1/E1 Virtual Port Mapping Table parameters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cdx6500VPCTT1E1PortEntry

cdx6500VPCTT1E1PortEntry 10.1.449.2.1.2.1.1.24.3.1
A Virtual T1/E1 Port Mapping Table Entry.Each entry contains the configuration parameters for a single T1/E1 virtual port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cdx6500VPCTT1E1PortEntry  

cdx6500VPCTT1E1CfgPortNumber 10.1.449.2.1.2.1.1.24.3.1.1
This is a T1/E1 virtual port number this channel is associated with. A value of 0 implies that this parameter was skipped during configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500VPCTT1E1CfgPortType 10.1.449.2.1.2.1.1.24.3.1.2
Specifies the type of virtual port. voice : The virtual voice port operates on a configured DS0. data : The virtual data port operates on a configured DS0. switchedVoice : The virtual voice port operates on a DS0 determined by the ISDN/QSIG D Channel. switchedData : The virtual data port operates on a DS0 determined by the ISDN/QSIG D Channel. nc : Skipped during configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER voice(1), data(2), switchedVoice(3), switchedData(4), bypassVoice(5), bypassData(6), nc(100)  

cdx6500VPCTT1E1CfgPhyPortNumber 10.1.449.2.1.2.1.1.24.3.1.3
This is the E1 or T1 port number this channel is associated with. A value of 0 implies that this parameter was skipped during configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500VPCTT1E1CfgTimeSlotNumber 10.1.449.2.1.2.1.1.24.3.1.4
Time slot assignment for the logical channel. T1 ports have time slots in the range (1..24) while E1 ports have time slots in the range (1..31). In addition, Time Slot 16 is not allowed (invalid) for E1 ports. A value of 0 implies that this parameter was skipped during configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500VPCTT1E1CfgDS0Rate 10.1.449.2.1.2.1.1.24.3.1.5
Specifies the number of valid data bits within each DS0 for this port. ds056k : 7 bits of the DS0 contains data information, the 8th bit is used for 1's density. ds064k : All 8 bits of the DS0 contain data information. DS0 Rate for ports configured with port type `voice' is always 64K, while for ports configured with port type `data', it is 56K or 64K, the default being 56K. nc : Skipped during configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ds056k(1), ds064k(2), nc(100)  

cdx6500VPCTT1E1CfgAggregateType 10.1.449.2.1.2.1.1.24.3.1.6
Selects the type of physical interface for the Virtual Port. t1e1 : The physical interface is a T1 or E1 card. so : The physical interface is a SO card. nc : Skipped during configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER t1e1(1), so(2), nc(100)  

cdx6500VPCTT1E1CfgSOPortNumber 10.1.449.2.1.2.1.1.24.3.1.7
This is the port number of the SO interface this virtual port is associated with. A value of 0 implies that this parameter was skipped during configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500VPCTT1E1CfgBChannel 10.1.449.2.1.2.1.1.24.3.1.8
This is the B-channel on the SO interface this virtual port is associated with. A value of 0 implies that this parameter was skipped during configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500VPCTT1E1CfgLocalSubscriberAddress 10.1.449.2.1.2.1.1.24.3.1.9
Specifies the Local Subscriber Address for this virtual port. For Incoming Call: The Called Party number received by the aggregate interface is compared to this parameter. For Outgoing Call: This will be passed as the outgoing Calling Party number. Enter a trailing asterisk(*) as a wild-card. Use the space bar to blank the parameter. 1 to 20 characters (valid characters are 0 through 9, '-', ',', '/', '(', ')', and '*'). The characters '-', ',', '(', ')', and '/' are allowed only for ease of reading.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

cdx6500VPCTT1E1CfgNetSpecCall 10.1.449.2.1.2.1.1.24.3.1.10
Select the network specific call-by-call feature. none : No network-specific facility. attSdn : AT&T Software Defined Network or Northern Tel Private Net. attMc800 : AT&T Megacom800 or Northern Tel InWats. attMc : AT&T Megcom or Northern Tel OutWats. ntFx : Northern Tel Foreign Exchange. ntTieTrunk : Northern Tel Tie Trunk. attAccunet : AT&T Accunet. attInt800 : AT&T International 800 Service. attMq : AT&T MultiQuest or NT TRO call. nc : Skipped during configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), attSdn(2), attMc800(3), attMc(4), ntFx(5), ntTieTrunk(6), attAccunet(7), attInt800(9), attMq(17), nc(100)  

cdx6500VPCTT1E1CfgPartyNumberType 10.1.449.2.1.2.1.1.24.3.1.11
This is the Calling/Called party Number Type as defined by ITU-T. unknown : Unknown number type. international : International number. national : National number. subscriber : Subscriber number. abbreviated : Abbreviated number. nc : Skipped during configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), international(2), national(3), subscriber(5), abbreviated(7), nc(100)  

cdx6500VPCTT1E1CfgPartyNumberPlan 10.1.449.2.1.2.1.1.24.3.1.12
This is the Calling/Called party Numbering Plan as defined by ITU-T. unknown : Unknown numbering plan. isdn : Recommendation E.164/E.163. telephony : Telephony numbering plan. private : Private numbering plan. nc : Skipped during configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), isdn(2), telephony(3), private(10), nc(100)  

cdx6500VPCTT1E1CfgIndex 10.1.449.2.1.2.1.1.24.3.1.13
This is the entry number in the Virtual Port Mapping Table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor