T11FamDomainPriority |
|
Priority of a switch.
The Principal Switch selection is influenced by the
priority of the switches.
Some values of importance are:
1 : The highest priority in Principal Switch
selection, which is used by the administrator
to establish which switch becomes the Principal
Switch.
255 : Indicates that the switch is not capable of
acting as a Principal Switch. |
TEXTUAL-CONVENTION |
|
|
|
|
Unsigned32 |
1..255 |
|
T11FamDomainInterfaceRole |
|
The 'designated' state/role of the Inter-Switch Link (ISL)
to which an interface connects, or (if not connected)
the state of the interface:
nonPrincipal (1) - non-Principal ISL
principalUpstream (2) - Upstream Principal ISL
principalDownsteam (3) - Downstream Principal ISL
isolated (4) - interface is isolated
down (5) - interface is down
unknown (6) - state/role is unknown
|
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
nonPrincipal(1), principalUpstream(2), principalDownsteam(3), isolated(4), down(5), unknown(6) |
|
T11FamState |
|
The state of the Fabric Address Manager, as described in
Table 86 and Figure 15 of FC-SW-3.
- 'other' represents a switch that is in a state not
represented by any of the below enumerations.
- 'starting' represents a switch engaged in the process
represented by the first row in Table 86.
- 'unconfigured' represents a switch that requires
operator input before it can begin the process
represented by the first row in Table 86.
- 'principalSwitchSelection' represents a switch engaged
in the process represented by the second row in
Table 86, but not in states F0 or F1 of Figure 15.
- 'domainIdDistribution' represents a switch engaged in
the process represented by the third row in Table 86.
- 'buildFabricPhase' represents a switch that is in
state F0 of Figure 15.
- 'reconfigureFabricPhase' represents a switch that is
in state F1 of Figure 15.
- 'stable' represents a switch that has successfully
completed the process represented by the third row in
Table 86 and has at least one E_Port.
- 'stableWithNoEports' represents a switch that has
successfully completed the process represented by the
third row in Table 86 but has no E_Ports.
- 'noDomains' represents a switch that has completed
the process represented by the third row in Table 86
but failed to obtain a Domain_ID.
- 'disabled' represents any situation in which the
corresponding instance of t11FamEnable has the value
'false'.
- 'unknown' represents a switch that is confused about
what state it is in. |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
other(1), starting(2), unconfigured(3), principalSwitchSelection(4), domainIdDistribution(5), buildFabricPhase(6), reconfigureFabricPhase(7), stable(8), stableWithNoEports(9), noDomains(10), disabled(11), unknown(12) |
|
T11FamEntry |
|
SEQUENCE |
|
|
|
|
t11FamFabricIndex |
T11FabricIndex |
|
|
t11FamConfigDomainId |
FcDomainIdOrZero |
|
|
t11FamConfigDomainIdType |
INTEGER |
|
|
t11FamAutoReconfigure |
TruthValue |
|
|
t11FamContiguousAllocation |
TruthValue |
|
|
t11FamPriority |
T11FamDomainPriority |
|
|
t11FamPrincipalSwitchWwn |
FcNameIdOrZero |
|
|
t11FamLocalSwitchWwn |
FcNameIdOrZero |
|
|
t11FamAssignedAreaIdList |
OCTET STRING |
|
|
t11FamGrantedFcIds |
Counter32 |
|
|
t11FamRecoveredFcIds |
Counter32 |
|
|
t11FamFreeFcIds |
Gauge32 |
|
|
t11FamAssignedFcIds |
Gauge32 |
|
|
t11FamAvailableFcIds |
Gauge32 |
|
|
t11FamRunningPriority |
T11FamDomainPriority |
|
|
t11FamPrincSwRunningPriority |
T11FamDomainPriority |
|
|
t11FamState |
T11FamState |
|
|
t11FamLocalPrincipalSwitchSlctns |
Counter32 |
|
|
t11FamPrincipalSwitchSelections |
Counter32 |
|
|
t11FamBuildFabrics |
Counter32 |
|
|
t11FamFabricReconfigures |
Counter32 |
|
|
t11FamDomainId |
FcDomainIdOrZero |
|
|
t11FamSticky |
TruthValue |
|
|
t11FamRestart |
INTEGER |
|
|
t11FamRcFabricNotifyEnable |
TruthValue |
|
|
t11FamEnable |
TruthValue |
|
|
t11FamFabricName |
FcNameIdOrZero |
|
T11FamIfEntry |
|
SEQUENCE |
|
|
|
|
t11FamIfRcfReject |
TruthValue |
|
|
t11FamIfRole |
T11FamDomainInterfaceRole |
|
|
t11FamIfRowStatus |
RowStatus |
|
T11FamAreaEntry |
|
SEQUENCE |
|
|
|
|
t11FamAreaAreaId |
Unsigned32 |
|
|
t11FamAreaAssignedPortIdList |
OCTET STRING |
|
T11FamFcIdCacheEntry |
|
SEQUENCE |
|
|
|
|
t11FamFcIdCacheWwn |
FcNameIdOrZero |
|
|
t11FamFcIdCacheAreaIdPortId |
OCTET STRING |
|
|
t11FamFcIdCachePortIds |
Unsigned32 |
|
t11FamEntry |
1.3.6.1.2.1.137.1.1.1.1 |
An entry provides information on the local Fabric Address
Manager functionality for a Fabric known to a
particular switch. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
T11FamEntry |
|
|
t11FamConfigDomainId |
1.3.6.1.2.1.137.1.1.1.1.2 |
The configured Domain_ID of the particular switch on this
Fabric, or zero if no Domain_ID has been configured.
The meaning of this object depends on
t11FamConfigDomainIdType object.
If t11FamConfigDomainIdType is 'preferred', then the
configured Domain_ID is called the 'preferred Domain_ID'.
Valid values are between 0 and 239. In a situation where
this Domain_ID cannot be assigned, any other Domain_ID
will be acceptable. A value of zero means any Domain_ID.
If t11FamConfigDomainIdType is 'insistent', then the
configured Domain_ID is called the 'insistent Domain_ID' and
valid values are between 1 and 239. In a situation where
this Domain_ID cannot be assigned, no other Domain_ID is
acceptable.
In both of the above cases, the switch sends an RDI (Request
Domain_ID) to request this Domain_ID to the Principal
Switch. If no Domain_ID is able to be granted in the case
of 'preferred', or if an 'insistent' Domain_ID is configured
but not able to be granted, then it is an error condition.
When this error occurs, the switch will continue as if it
receives a SW_RJT with a reason/explanation of 'Unable to
perform command request'/'Domain_ID not available'. That
is, its E_Ports on that Fabric will be isolated and the
administrator informed via a 't11FamDomainIdNotAssigned'
notification.
If t11FamConfigDomainIdType is 'static', then the configured
Domain_ID is called the 'static Domain_ID' and valid values
are between 1 and 239. In this situation, there is no
Principal Switch in the Fabric and the Domain_ID is simply
assigned by configuration, together with the Fabric_Name.
A switch configured with a static Domain_ID, on receiving
an EFP, BF, RCF, DIA, or RDI SW_ILS, shall reply with an
SW_RJT having Reason Code Explanation 'E_Port is Isolated'
and shall isolate the receiving E_Port.
For the persistence of values across reboots, see the
MODULE-IDENTITY's DESCRIPTION clause. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
FcDomainIdOrZero |
|
|
t11FamConfigDomainIdType |
1.3.6.1.2.1.137.1.1.1.1.3 |
Type of configured Domain_ID contained in
t11FamConfigDomainId.
For the persistence of values across reboots, see the
MODULE-IDENTITY's DESCRIPTION clause. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
preferred(1), insistent(2), static(3) |
|
t11FamDomainId |
1.3.6.1.2.1.137.1.1.1.1.22 |
The Domain_ID of a particular switch on this Fabric or
zero if no Domain_ID has been assigned. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
FcDomainIdOrZero |
|
|
t11FamIfEntry |
1.3.6.1.2.1.137.1.1.2.1 |
An entry containing information on the interface
configuration on the Fabric identified by
t11FamFabricIndex. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
T11FamIfEntry |
|
|
t11FamAreaEntry |
1.3.6.1.2.1.137.1.2.1.1 |
An entry gives information on the Area_ID and all
Port_IDs that have been assigned within an area for
the Fabric identified by t11FamFabricIndex, by the
Fabric Address Manager in the switch identified by
fcmInstanceIndex and fcmSwitchIndex. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
T11FamAreaEntry |
|
|
t11FamDatabaseEntry |
1.3.6.1.2.1.137.1.2.2.1 |
An entry (conceptual row) in the t11FamDatabaseTable
containing information about one Domain_ID in the
Fabric identified by t11FamFabricIndex, and known by
the switch identified by t11FamFabricIndex and
t11FamDatabaseDomainId. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
T11FamDatabaseEntry |
|
|
t11FamDatabaseDomainId |
1.3.6.1.2.1.137.1.2.2.1.1 |
The Domain_ID for which this row contains information.
The value must be non-zero. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
FcDomainIdOrZero |
1..239 |
|
t11FamFcIdCacheEntry |
1.3.6.1.2.1.137.1.2.4.1 |
An entry (conceptual row) in the t11FamFcIdCacheTable
containing information about one Fibre Channel Address
Identifier that was released from a WWN, corresponding to a
range of one or more ports connected to the switch
(identified by t11FamFabricIndex and t11FamFcIdCacheWwn) in
the Fabric (identified by t11FamFabricIndex). An entry is
created when a Fibre Channel Address Identifier is released
by the last port in the range. The oldest entry is deleted
if the number of rows in this table reaches
t11FamMaxFcIdCacheSize, and its space is required for a new
entry. An entry is also deleted when its Fibre Channel
Address Identifier is assigned to a port. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
T11FamFcIdCacheEntry |
|
|
t11FamDomainIdNotAssignedNotify |
1.3.6.1.2.1.137.0.1 |
This notification indicates that a Domain_ID has not
been configured or assigned for a particular Fabric,
identified by t11FamNotifyFabricIndex, on a particular
switch identified by t11FamLocalSwitchWwn. This could
happen under the following conditions, and results in the
switch isolating E_Ports on the Fabric:
- if the switch's request for a configured static
Domain_ID is rejected or no other Domain_ID is
assigned, then the E_Ports are isolated. |
Status: current |
Access: accessible-for-notify |
NOTIFICATION-TYPE |
|
|
|