ServerNetPCI-MIB

File: ServerNetPCI-MIB.mib (55405 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB
RFC-1215

Imported symbols

enterprises Counter Gauge
OBJECT-TYPE DisplayString TRAP-TYPE

Defined Types

SnetAdaptrEntry  
SEQUENCE    
  snetAdaptrIndex INTEGER
  snetAdaptrProductModel DisplayString
  snetAdaptrProductVersion DisplayString
  snetAdaptrProductVendor DisplayString
  snetAdaptrBusSlot INTEGER
  snetAdaptrSnetID DisplayString
  snetAdaptrMtu INTEGER
  snetAdaptrStatus INTEGER
  snetAdaptrAdminStatus INTEGER
  snetAdaptrBTEAvail INTEGER
  snetAdaptrBTEGauge Gauge
  snetAdaptrAVTAvail INTEGER
  snetAdaptrAVTGauge Gauge
  snetAdaptrXPortStatus INTEGER
  snetAdaptrYPortStatus INTEGER
  snetAdaptrPushRequestsLow Counter
  snetAdaptrPushOctetsLow Counter
  snetAdaptrPullRequestsLow Counter
  snetAdaptrPullOctetsLow Counter
  snetAdaptrNakErrorsLow Counter
  snetAdaptrTimeoutErrorsLow Counter
  snetAdaptrParamErrorsLow Counter
  snetAdaptrRemoteErrorsLow Counter
  snetAdaptrPushRequestsHi Counter
  snetAdaptrPushOctetsHi Counter
  snetAdaptrPullRequestsHi Counter
  snetAdaptrPullOctetsHi Counter
  snetAdaptrNakErrorsHi Counter
  snetAdaptrTimeoutErrorsHi Counter
  snetAdaptrParamErrorsHi Counter
  snetAdaptrRemoteErrorsHi Counter
  snetAdaptrXNakErrorsLow Counter
  snetAdaptrXNakErrorsHi Counter
  snetAdaptrYNakErrorsLow Counter
  snetAdaptrYNakErrorsHi Counter
  snetAdaptrXTimeoutErrorsLow Counter
  snetAdaptrXTimeoutErrorsHi Counter
  snetAdaptrYTimeoutErrorsLow Counter
  snetAdaptrYTimeoutErrorsHi Counter
  snetAdaptrCauseExceptQueueErrorLow Counter
  snetAdaptrCauseExceptQueueErrorHi Counter
  snetAdaptrCauseWriteReqOverflowLow Counter
  snetAdaptrCauseWriteReqOverflowHi Counter
  snetAdaptrCauseAccessErrorLow Counter
  snetAdaptrCauseAccessErrorHi Counter
  snetAdaptrCauseReadReqOverflowLow Counter
  snetAdaptrCauseReadReqOverflowHi Counter
  snetAdaptrCauseQueueFullLow Counter
  snetAdaptrCauseQueueFullHi Counter
  snetAdaptrXHaltLow Counter
  snetAdaptrXHaltHi Counter
  snetAdaptrYHaltLow Counter
  snetAdaptrYHaltHi Counter
  snetAdaptrHaltLow Counter
  snetAdaptrHaltHi Counter
  snetAdaptrXLxSecondExceptionsLow Counter
  snetAdaptrXLxSecondExceptionsHi Counter
  snetAdaptrYLxSecondExceptionsLow Counter
  snetAdaptrYLxSecondExceptionsHi Counter
  snetAdaptrLxSecondExceptionsLow Counter
  snetAdaptrLxSecondExceptionsHi Counter
  snetAdaptrXLxCrcErrorsLow Counter
  snetAdaptrXLxCrcErrorsHi Counter
  snetAdaptrYLxCrcErrorsLow Counter
  snetAdaptrYLxCrcErrorsHi Counter
  snetAdaptrLxCrcErrorsLow Counter
  snetAdaptrLxCrcErrorsHi Counter
  snetAdaptrXLxIllegalCommandsLow Counter
  snetAdaptrXLxIllegalCommandsHi Counter
  snetAdaptrYLxIllegalCommandsLow Counter
  snetAdaptrYLxIllegalCommandsHi Counter
  snetAdaptrLxIllegalCommandsLow Counter
  snetAdaptrLxIllegalCommandsHi Counter
  snetAdaptrXLxFifoOverrunLow Counter
  snetAdaptrXLxFifoOverrunHi Counter
  snetAdaptrYLxFifoOverrunLow Counter
  snetAdaptrYLxFifoOverrunHi Counter
  snetAdaptrLxFifoOverrunLow Counter
  snetAdaptrLxFifoOverrunHi Counter
  snetAdaptrXLxKeepAliveErrorsLow Counter
  snetAdaptrXLxKeepAliveErrorsHi Counter
  snetAdaptrYLxKeepAliveErrorsLow Counter
  snetAdaptrYLxKeepAliveErrorsHi Counter
  snetAdaptrLxKeepAliveErrorsLow Counter
  snetAdaptrLxKeepAliveErrorsHi Counter
  snetAdaptrXLxEFifoOverflowLow Counter
  snetAdaptrXLxEFifoOverflowHi Counter
  snetAdaptrYLxEFifoOverflowLow Counter
  snetAdaptrYLxEFifoOverflowHi Counter
  snetAdaptrLxEFifoOverflowLow Counter
  snetAdaptrLxEFifoOverflowHi Counter
  snetAdaptrXRecentLxSymbol INTEGER
  snetAdaptrXPreviousLxSymbol INTEGER
  snetAdaptrYRecentLxSymbol INTEGER
  snetAdaptrYPreviousLxSymbol INTEGER
  snetAdaptrIntrPktDroppedLow Counter
  snetAdaptrIntrPktDroppedHi Counter
  snetAdaptrBteDoneInterrupts1Low Counter
  snetAdaptrBteDoneInterrupts1Hi Counter
  snetAdaptrBteDoneInterrupts2Low Counter
  snetAdaptrBteDoneInterrupts2Hi Counter
  snetAdaptrNodeMfgId INTEGER
  snetAdaptrNodePartNumber INTEGER
  snetAdaptrNodeSerialNumber DisplayString
  snetAdaptrSnetID1 DisplayString
  snetAdaptrRevMajor INTEGER
  snetAdaptrRevMinor INTEGER

SnetAdaptrNeighborEntry  
SEQUENCE    
  snetAdaptrNeighborIndex INTEGER
  snetAdaptrNeighborNodeType INTEGER
  snetAdaptrNeighborflState INTEGER
  snetAdaptrNeighborflAttrib INTEGER
  snetAdaptrNeighborNodeId DisplayString
  snetAdaptrNeighborName DisplayString
  snetAdaptrNeighborDomain DisplayString
  snetAdaptrNeighborMfgId INTEGER
  snetAdaptrNeighborPartNumber INTEGER
  snetAdaptrNeighborSerialNumber DisplayString
  snetAdaptrNeighborFabric INTEGER

SnetAdaptrNodeIDEntry  
SEQUENCE    
  snetAdaptrNodeIDIndex INTEGER
  snetAdapterNodeID DisplayString

SnetAdaptrOsCommonModuleEntry  
SEQUENCE    
  snetAdaptrOsCommonModuleIndex INTEGER
  snetAdaptrOsCommonModuleName DisplayString
  snetAdaptrOsCommonModuleVersion DisplayString
  snetAdaptrOsCommonModuleDate OCTET STRING
  snetAdaptrOsCommonModulePurpose DisplayString

Defined Values

tandem 1.3.6.1.4.1.169
OBJECT IDENTIFIER    

serverNet 1.3.6.1.4.1.169.8
OBJECT IDENTIFIER    

pcisnet 1.3.6.1.4.1.169.8.1
OBJECT IDENTIFIER    

snetMibRev 1.3.6.1.4.1.169.8.1.1
OBJECT IDENTIFIER    

snetAdaptr 1.3.6.1.4.1.169.8.1.2
OBJECT IDENTIFIER    

snetAdaptrOsCommonGroup 1.3.6.1.4.1.169.8.1.3
OBJECT IDENTIFIER    

snetMibRevMajor 1.3.6.1.4.1.169.8.1.1.1
The Major Revision level of the MIB. A change in the major revision level represents a major change in the architecture of the MIB. A change in the major revision level may indicate a significant change in the information supported and/or the meaning of the supported information. Correct interpretation of data may require a MIB document with the same major revision level.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

snetMibRevMinor 1.3.6.1.4.1.169.8.1.1.2
The Minor Revision level of the MIB. A change in the minor revision level may represent some minor additional support, no changes to any pre-existing information has occurred.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

snetMibCondition 1.3.6.1.4.1.169.8.1.1.3
ServerNet adapter(s) overall MIB condition. This represents the overall condition of all ServerNet adapters installed in the system. The overall condition states are: other(1) All ServerNet adapters are OK except for at least 1 is Other. ok(2) All ServerNet adapters are OK. degraded(3) One or more ServerNet adapters are Degraded. failed(4) One or more ServerNet adapters are Failed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), ok(2), degraded(3), failed(4)  

snetMibPollInterval 1.3.6.1.4.1.169.8.1.1.4
**NOTE: this object is obsolete.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

snetMibStatusTrapEnable 1.3.6.1.4.1.169.8.1.1.5
The snetAdaptrStatusChange Trap Enable/Disable switch. This defaults to on.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

snetMibXPortTrapEnable 1.3.6.1.4.1.169.8.1.1.6
The snetAdaptrXPortStatusChange Trap Enable/Disable switch. This defaults to on.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

snetMibYPortTrapEnable 1.3.6.1.4.1.169.8.1.1.7
The snetAdaptrYPortStatusChange Trap Enable/Disable switch. This defaults to on.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

snetMibTimeoutErrorTrapEnable 1.3.6.1.4.1.169.8.1.1.8
**NOTE: this object is obsolete.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

snetAdaptrNumber 1.3.6.1.4.1.169.8.1.2.1
The number of ServerNet adapters (regardless of state) present on the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snetAdaptrTable 1.3.6.1.4.1.169.8.1.2.2
ServerNet adapter table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnetAdaptrEntry

snetAdaptrEntry 1.3.6.1.4.1.169.8.1.2.2.1
An entry containing ServerNet adapter objects.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnetAdaptrEntry  

snetAdaptrIndex 1.3.6.1.4.1.169.8.1.2.2.1.1
ServerNet adapter index. The adapter index indicates to which ServerNet adapter instance this table entry belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..225  

snetAdaptrProductModel 1.3.6.1.4.1.169.8.1.2.2.1.2
A textual string containing the product model name of the interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

snetAdaptrProductVersion 1.3.6.1.4.1.169.8.1.2.2.1.3
A textual string containing the product version of the interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

snetAdaptrProductVendor 1.3.6.1.4.1.169.8.1.2.2.1.4
A textual string containing the vendor of the product interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

snetAdaptrBusSlot 1.3.6.1.4.1.169.8.1.2.2.1.5
The PCI bus logical slot number of the ServerNet adapter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snetAdaptrSnetID 1.3.6.1.4.1.169.8.1.2.2.1.6
The ServerNet ID of the node containing the ServerNet adapter Port 0. It is displayed as hexadecimal value
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

snetAdaptrSnetID1 1.3.6.1.4.1.169.8.1.2.2.1.105
The ServerNet ID of the node containing the ServerNet adapter Port 1. It is displayed as hexadecimal value
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

snetAdaptrMtu 1.3.6.1.4.1.169.8.1.2.2.1.7
The size of the largest transfer which can be pushed or pulled on the interface, specified in octets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snetAdaptrStatus 1.3.6.1.4.1.169.8.1.2.2.1.8
ServerNet adapter status. The ServerNet board can be in one of the following states: other(1) The controller is in a state other than one of those listed below. ok(2) Indicates normal operating mode. No user action is necessary. degraded(3) Indicates either the X-Port or Y-Port has failed but not both. failed(4) Indicates that the controller has failed because both ports have failed or a detectable hardware failure occurred. You should bring down the server and run Diagnostics to help identify the problem. The ServerNet adapter may need to be replaced.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), ok(2), degraded(3), failed(4)  

snetAdaptrAdminStatus 1.3.6.1.4.1.169.8.1.2.2.1.9
Reserved for future use.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), up(2), down(3), testing(4)  

snetAdaptrBTEAvail 1.3.6.1.4.1.169.8.1.2.2.1.10
The total number of BTE descriptors available.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snetAdaptrBTEGauge 1.3.6.1.4.1.169.8.1.2.2.1.11
The high watermark of BTE descriptors used. An SNMP set can reset the high water mark to zero, all other values are not allowed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

snetAdaptrAVTAvail 1.3.6.1.4.1.169.8.1.2.2.1.12
The total number of AVT entries available.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snetAdaptrAVTGauge 1.3.6.1.4.1.169.8.1.2.2.1.13
The high watermark of AVT entries used. An SNMP set can reset the high water mark to zero, all other values are not allowed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

snetAdaptrXPortStatus 1.3.6.1.4.1.169.8.1.2.2.1.14
The current state of the X-Port. other(1) The state of the X-Port could not be determined. ok(2) Indicates normal operating mode. No user action is necessary. degraded(3) Indicates the X-Port is running in a degraded mode. failed(4) The X-Port has failed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), ok(2), degraded(3), failed(4)  

snetAdaptrYPortStatus 1.3.6.1.4.1.169.8.1.2.2.1.15
The current state of the Y-Port. other(1) The state of the Y-Port could not be determined. ok(2) Indicates normal operating mode. No user action is necessary. degraded(3) Indicates the Y-Port is running in a degraded mode. failed(4) The Y-Port has failed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), ok(2), degraded(3), failed(4)  

snetAdaptrPushRequestsLow 1.3.6.1.4.1.169.8.1.2.2.1.16
The number of requests pushed. Low order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrPushOctetsLow 1.3.6.1.4.1.169.8.1.2.2.1.17
The number of octets pushed that originate from the local node. Low order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrPullRequestsLow 1.3.6.1.4.1.169.8.1.2.2.1.18
The number of calls made to the SPA driver from the client. Low order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrPullOctetsLow 1.3.6.1.4.1.169.8.1.2.2.1.19
The number of octets pulled. Low order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrNakErrorsLow 1.3.6.1.4.1.169.8.1.2.2.1.20
The number of push/pull requests that were received by the destination but rejected and cannot be completed. Low order 32 bits. This value is combined with snetAdaptrNakErrorsHi to create a 64 bit value. The MIB variable snetAdaptrNakErrorsLow is a calculated value. It is the low order 32 bits of the sum of snetAdaptrXNakErrors, and snetAdaptrYNakErrors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrTimeoutErrorsLow 1.3.6.1.4.1.169.8.1.2.2.1.21
The number of push/pull requests that were never acknowledged and cannot be completed. Low order 32 bits. This value is combined with snetAdaptrTimeoutErrorsHi to create a 64 bit value. The MIB variable snetAdaptrTimeoutErrorsLow is a calculated value. It is the low order 32 bits of the sum of snetAdaptrXTimeoutErrors and snetAdaptrYTimeoutErrors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrParamErrorsLow 1.3.6.1.4.1.169.8.1.2.2.1.22
The number of push/pull requests that were never sent to the destination because of a parameter programming error and cannot be completed. Low order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrRemoteErrorsLow 1.3.6.1.4.1.169.8.1.2.2.1.23
The number of errors that occurred due to remote push/pull requests.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrPushRequestsHi 1.3.6.1.4.1.169.8.1.2.2.1.24
The number of requests pushed. High order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrPushOctetsHi 1.3.6.1.4.1.169.8.1.2.2.1.25
The number of octets pushed that originate from the local node. High order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrPullRequestsHi 1.3.6.1.4.1.169.8.1.2.2.1.26
The number of calls made to the SPA driver from the client. High order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrPullOctetsHi 1.3.6.1.4.1.169.8.1.2.2.1.27
The number of octets pulled. High order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrNakErrorsHi 1.3.6.1.4.1.169.8.1.2.2.1.28
The number of push/pull requests that were received by the destination but rejected and cannot be completed. High order 32 bits. This value is combined with snetAdaptrNakErrorsLow to create a 64 bit value. The MIB variable snetAdaptrNakErrorsHi is a calculated value. It is the high order 32 bits of the sum of snetAdaptrXNakErrors and snetAdaptrYNakErrors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrTimeoutErrorsHi 1.3.6.1.4.1.169.8.1.2.2.1.29
The number of push/pull requests that were never acknowledged and cannot be completed. High order 32 bits. This value is combined with snetAdaptrTimeoutErrosHi to create a 64 bit value. The MIB variable snetAdaptrTimeoutErrorsHi is a calculated value. It is the high order 32 bits of the sum of snetAdaptrXTimeoutErrors and snetAdaptrYTimeoutErrors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrParamErrorsHi 1.3.6.1.4.1.169.8.1.2.2.1.30
The number of push/pull requests that were never sent to the destination because of a parameter programming error and cannot be completed. High order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrRemoteErrorsHi 1.3.6.1.4.1.169.8.1.2.2.1.31
The number of errors that occurred due to remote push/pull requests. High order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrXNakErrorsLow 1.3.6.1.4.1.169.8.1.2.2.1.32
The number of push/pull requests that were received by the destination but rejected and cannot be completed on the X port. Low order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrXNakErrorsHi 1.3.6.1.4.1.169.8.1.2.2.1.33
The number of push/pull requests that were received by the destination but rejected and cannot be completed on the X port. High order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrYNakErrorsLow 1.3.6.1.4.1.169.8.1.2.2.1.34
The number of push/pull requests that were received by the destination but rejected and cannot be completed on the Y port. Low order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrYNakErrorsHi 1.3.6.1.4.1.169.8.1.2.2.1.35
The number of push/pull requests that were received by the destination but rejected and cannot be completed on the Y port. High order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrXTimeoutErrorsLow 1.3.6.1.4.1.169.8.1.2.2.1.36
The number of push/pull requests that were never acknowledged and cannot be completed on the X port. Low order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrXTimeoutErrorsHi 1.3.6.1.4.1.169.8.1.2.2.1.37
The number of push/pull requests that were never acknowledged and cannot be completed on the X port. High order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrYTimeoutErrorsLow 1.3.6.1.4.1.169.8.1.2.2.1.38
The number of push/pull requests that were never acknowledged and cannot be completed on the Y port. Low order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrYTimeoutErrorsHi 1.3.6.1.4.1.169.8.1.2.2.1.39
The number of push/pull requests that were never acknowledged and cannot be completed on the Y port. High order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrCauseExceptQueueErrorLow 1.3.6.1.4.1.169.8.1.2.2.1.40
The total number of push exception queue overflows. Low order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrCauseExceptQueueErrorHi 1.3.6.1.4.1.169.8.1.2.2.1.41
The total number of push exception queue overflows. High order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrCauseWriteReqOverflowLow 1.3.6.1.4.1.169.8.1.2.2.1.42
The total number of Write Request Overflows. Low order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrCauseWriteReqOverflowHi 1.3.6.1.4.1.169.8.1.2.2.1.43
The total number of Write Request overflows. High order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrCauseAccessErrorLow 1.3.6.1.4.1.169.8.1.2.2.1.44
The total number of Access errors. Low order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrCauseAccessErrorHi 1.3.6.1.4.1.169.8.1.2.2.1.45
The total number of Access errors. High order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrCauseReadReqOverflowLow 1.3.6.1.4.1.169.8.1.2.2.1.46
The total number of Read Request Overflows. Low order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrCauseReadReqOverflowHi 1.3.6.1.4.1.169.8.1.2.2.1.47
The total number of Read Request Overflows. High order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrCauseQueueFullLow 1.3.6.1.4.1.169.8.1.2.2.1.48
The total number of Interrupt Queue Full Errors. Low order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrCauseQueueFullHi 1.3.6.1.4.1.169.8.1.2.2.1.49
The total number of Interrupt Queue Full Errors. High order 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrXHaltLow 1.3.6.1.4.1.169.8.1.2.2.1.50
**NOTE: this object is obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrXHaltHi 1.3.6.1.4.1.169.8.1.2.2.1.51
**NOTE: this object is obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrYHaltLow 1.3.6.1.4.1.169.8.1.2.2.1.52
**NOTE: this object is obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrYHaltHi 1.3.6.1.4.1.169.8.1.2.2.1.53
**NOTE: this object is obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrHaltLow 1.3.6.1.4.1.169.8.1.2.2.1.54
**NOTE: this object is obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrHaltHi 1.3.6.1.4.1.169.8.1.2.2.1.55
**NOTE: this object is obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrXLxSecondExceptionsLow 1.3.6.1.4.1.169.8.1.2.2.1.56
**NOTE: this object is obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrXLxSecondExceptionsHi 1.3.6.1.4.1.169.8.1.2.2.1.57
**NOTE: this object is obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrYLxSecondExceptionsLow 1.3.6.1.4.1.169.8.1.2.2.1.58
**NOTE: this object is obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrYLxSecondExceptionsHi 1.3.6.1.4.1.169.8.1.2.2.1.59
**NOTE: this object is obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrLxSecondExceptionsLow 1.3.6.1.4.1.169.8.1.2.2.1.60
**NOTE: this object is obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrLxSecondExceptionsHi 1.3.6.1.4.1.169.8.1.2.2.1.61
**NOTE: this object is obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrXLxCrcErrorsLow 1.3.6.1.4.1.169.8.1.2.2.1.62
**NOTE: this object is obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrXLxCrcErrorsHi 1.3.6.1.4.1.169.8.1.2.2.1.63
**NOTE: this object is obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrYLxCrcErrorsLow 1.3.6.1.4.1.169.8.1.2.2.1.64
**NOTE: this object is obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrYLxCrcErrorsHi 1.3.6.1.4.1.169.8.1.2.2.1.65
**NOTE: this object is obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrLxCrcErrorsLow 1.3.6.1.4.1.169.8.1.2.2.1.66
**NOTE: this object is obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrLxCrcErrorsHi 1.3.6.1.4.1.169.8.1.2.2.1.67
**NOTE: this object is obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrXLxIllegalCommandsLow 1.3.6.1.4.1.169.8.1.2.2.1.68
**NOTE: this object is obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrXLxIllegalCommandsHi 1.3.6.1.4.1.169.8.1.2.2.1.69
**NOTE: this object is obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrYLxIllegalCommandsLow 1.3.6.1.4.1.169.8.1.2.2.1.70
**NOTE: this object is obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrYLxIllegalCommandsHi 1.3.6.1.4.1.169.8.1.2.2.1.71
**NOTE: this object is obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrLxIllegalCommandsLow 1.3.6.1.4.1.169.8.1.2.2.1.72
**NOTE: this object is obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrLxIllegalCommandsHi 1.3.6.1.4.1.169.8.1.2.2.1.73
**NOTE: this object is obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrXLxFifoOverrunLow 1.3.6.1.4.1.169.8.1.2.2.1.74
**NOTE: this object is obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrXLxFifoOverrunHi 1.3.6.1.4.1.169.8.1.2.2.1.75
**NOTE: this object is obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrYLxFifoOverrunLow 1.3.6.1.4.1.169.8.1.2.2.1.76
**NOTE: this object is obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrYLxFifoOverrunHi 1.3.6.1.4.1.169.8.1.2.2.1.77
**NOTE: this object is obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrLxFifoOverrunLow 1.3.6.1.4.1.169.8.1.2.2.1.78
**NOTE: this object is obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrLxFifoOverrunHi 1.3.6.1.4.1.169.8.1.2.2.1.79
**NOTE: this object is obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrXLxKeepAliveErrorsLow 1.3.6.1.4.1.169.8.1.2.2.1.80
**NOTE: this object is obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrXLxKeepAliveErrorsHi 1.3.6.1.4.1.169.8.1.2.2.1.81
**NOTE: this object is obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrYLxKeepAliveErrorsLow 1.3.6.1.4.1.169.8.1.2.2.1.82
**NOTE: this object is obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrYLxKeepAliveErrorsHi 1.3.6.1.4.1.169.8.1.2.2.1.83
**NOTE: this object is obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrLxKeepAliveErrorsLow 1.3.6.1.4.1.169.8.1.2.2.1.84
**NOTE: this object is obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrLxKeepAliveErrorsHi 1.3.6.1.4.1.169.8.1.2.2.1.85
**NOTE: this object is obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrXLxEFifoOverflowLow 1.3.6.1.4.1.169.8.1.2.2.1.86
**NOTE: this object is obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrXLxEFifoOverflowHi 1.3.6.1.4.1.169.8.1.2.2.1.87
**NOTE: this object is obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrYLxEFifoOverflowLow 1.3.6.1.4.1.169.8.1.2.2.1.88
**NOTE: this object is obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrYLxEFifoOverflowHi 1.3.6.1.4.1.169.8.1.2.2.1.89
**NOTE: this object is obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrLxEFifoOverflowLow 1.3.6.1.4.1.169.8.1.2.2.1.90
**NOTE: this object is obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrLxEFifoOverflowHi 1.3.6.1.4.1.169.8.1.2.2.1.91
**NOTE: this object is obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrXRecentLxSymbol 1.3.6.1.4.1.169.8.1.2.2.1.92
**NOTE: this object is obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

snetAdaptrXPreviousLxSymbol 1.3.6.1.4.1.169.8.1.2.2.1.93
**NOTE: this object is obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

snetAdaptrYRecentLxSymbol 1.3.6.1.4.1.169.8.1.2.2.1.94
**NOTE: this object is obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

snetAdaptrYPreviousLxSymbol 1.3.6.1.4.1.169.8.1.2.2.1.95
**NOTE: this object is obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

snetAdaptrIntrPktDroppedLow 1.3.6.1.4.1.169.8.1.2.2.1.96
**NOTE: this object is obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrIntrPktDroppedHi 1.3.6.1.4.1.169.8.1.2.2.1.97
**NOTE: this object is obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrBteDoneInterrupts1Low 1.3.6.1.4.1.169.8.1.2.2.1.98
The count of bte done interrupts for each BTEqueue. Low 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrBteDoneInterrupts1Hi 1.3.6.1.4.1.169.8.1.2.2.1.99
The count of bte done interrupts for each BTEqueue. High 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrBteDoneInterrupts2Low 1.3.6.1.4.1.169.8.1.2.2.1.100
The count of bte done interrupts for each BTEqueue. Low 32 bits..
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrBteDoneInterrupts2Hi 1.3.6.1.4.1.169.8.1.2.2.1.101
The count of bte done interrupts for each BTEqueue. High 32 bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snetAdaptrNodeMfgId 1.3.6.1.4.1.169.8.1.2.2.1.102
Node Manufacturing ID
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snetAdaptrNodePartNumber 1.3.6.1.4.1.169.8.1.2.2.1.103
Node Part Number
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snetAdaptrNodeSerialNumber 1.3.6.1.4.1.169.8.1.2.2.1.104
Node Serial Number
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

snetAdaptrRevMajor 1.3.6.1.4.1.169.8.1.2.2.1.106
Adapter driver major revision level
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snetAdaptrRevMinor 1.3.6.1.4.1.169.8.1.2.2.1.107
Adapter driver minor revision level
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snetAdaptrNeighborTable 1.3.6.1.4.1.169.8.1.2.3
ServerNet adapter neighboring data.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnetAdaptrNeighborEntry

snetAdaptrNeighborEntry 1.3.6.1.4.1.169.8.1.2.3.1
An entry containing ServerNet adapter neighbor data.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnetAdaptrNeighborEntry  

snetAdaptrNeighborIndex 1.3.6.1.4.1.169.8.1.2.3.1.1
ServerNet adapter neighbor data index. Indicates the port the neighbor is connected to.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..225  

snetAdaptrNeighborNodeType 1.3.6.1.4.1.169.8.1.2.3.1.2
ServerNet adapter's neighbor Node type. Valid values are Unknown(1), End Node(2), Auto-Configured IO(3), Manual-Configutred IO(4), Switch(5)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), endNode(2), autoConfiguredIO(3), manualConfiguredIO(4), switch(5)  

snetAdaptrNeighborflState 1.3.6.1.4.1.169.8.1.2.3.1.3
ServerNet adapter's neighbor node state. Valid values are unConfigured(1), configured(2)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unConfigured(1), configured(2)  

snetAdaptrNeighborflAttrib 1.3.6.1.4.1.169.8.1.2.3.1.4
ServerNet adapter's neighbor node attributes.(Not supported)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..225  

snetAdaptrNeighborNodeId 1.3.6.1.4.1.169.8.1.2.3.1.5
ServerNet adapter's neighbor node High level Id.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

snetAdaptrNeighborName 1.3.6.1.4.1.169.8.1.2.3.1.6
ServerNet adapter's neighbor node name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..19)  

snetAdaptrNeighborDomain 1.3.6.1.4.1.169.8.1.2.3.1.7
ServerNet adapter's neighbor node Domain.(Not supported.)
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..19)  

snetAdaptrNeighborMfgId 1.3.6.1.4.1.169.8.1.2.3.1.8
ServerNet adapter's neighbor node manufacturing ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snetAdaptrNeighborPartNumber 1.3.6.1.4.1.169.8.1.2.3.1.9
ServerNet adapter's neighbor node part number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snetAdaptrNeighborSerialNumber 1.3.6.1.4.1.169.8.1.2.3.1.10
ServerNet adapter's neighbor node serial number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

snetAdaptrNeighborFabric 1.3.6.1.4.1.169.8.1.2.3.1.11
ServerNet adapter's neighbor node fabric. Valid values are 1 = X Fabric 2 = Y Fabric 3 = both Fabrics 4 = Not Defined
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER xFabric(1), yFabric(2), bothFabrics(3), notDefined(4)  

snetAdaptrNodeIDTable 1.3.6.1.4.1.169.8.1.2.4
ServerNet adapter node ID table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnetAdaptrNodeIDEntry

snetAdaptrNodeIDEntry 1.3.6.1.4.1.169.8.1.2.4.1
An entry containing ServerNet adapter node ID data.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnetAdaptrNodeIDEntry  

snetAdaptrNodeIDIndex 1.3.6.1.4.1.169.8.1.2.4.1.1
ServerNet node data index. The adapter index indicates which ServerNet adapter data instance this table entry belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snetAdapterNodeID 1.3.6.1.4.1.169.8.1.2.4.1.2
ServerNet Node ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

snetAdaptrOsCommonModuleTable 1.3.6.1.4.1.169.8.1.3.1
A table of software modules that provide an interface to the ServerNet adapter.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnetAdaptrOsCommonModuleEntry

snetAdaptrOsCommonModuleEntry 1.3.6.1.4.1.169.8.1.3.1.1
A description of software modules that provide an interface to the ServerNet adapter.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnetAdaptrOsCommonModuleEntry  

snetAdaptrOsCommonModuleIndex 1.3.6.1.4.1.169.8.1.3.1.1.1
A unique index for the module description.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

snetAdaptrOsCommonModuleName 1.3.6.1.4.1.169.8.1.3.1.1.2
The module name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

snetAdaptrOsCommonModuleVersion 1.3.6.1.4.1.169.8.1.3.1.1.3
The module version in XX.YY format. XX is the major version and YY is the minor version number. This field will be a null (size 0) string if the agent cannot provide the module version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..19)  

snetAdaptrOsCommonModuleDate 1.3.6.1.4.1.169.8.1.3.1.1.4
The module date. field octets contents range ===== ====== ======== ===== 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minute 0..59 6 7 second 0..60 (use 60 for leap second) This field will be set to year = 0 if the agent cannot provide the module date. The hour, minute, and second field will be set to zero (0) if they are not relevant. The year field is set with the most significant octet first.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(7)  

snetAdaptrOsCommonModulePurpose 1.3.6.1.4.1.169.8.1.3.1.1.5
The purpose of the module described in this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

snetAdaptrStatusChange 1
ServerNet Controller Status Change. The agent has detected a change in the controller status of a ServerNet Controller. The variable snetAdaptrStatus indicates the current controller status.
TRAP-TYPE    

snetAdaptrXPortStatusChange 2
ServerNet Controller X-Port Status Change. The agent has detected a change in the controller status of a the X-Port of the ServerNet Controller. The variable snetAdaptrXPortStatus indicates the current X-Port controller status.
TRAP-TYPE    

snetAdaptrYPortStatusChange 3
ServerNet Controller Y-Port Status Change. The agent has detected a change in the controller status of a the Y-Port of the ServerNet Controller. The variable snetAdaptrYPortStatus indicates the current Y-Port controller status.
TRAP-TYPE    

snetAdaptrTimeoutErrorsChange 4
This trap is obsolete. It is no longer generated. The trap number is reserved for compatibility.
TRAP-TYPE